phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg

The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from
register layout.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-10-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h

@@ -28,6 +28,7 @@
 #define QPHY_V2_PCS_FLL_CNT_VAL_L			0x0c8
 #define QPHY_V2_PCS_FLL_CNT_VAL_H_TOL			0x0cc
 #define QPHY_V2_PCS_FLL_MAN_CODE			0x0d0
+#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_STATUS		0x178
 #define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB	0x1a8
 #define QPHY_V2_PCS_OSC_DTCT_ACTIONS			0x1ac
 #define QPHY_V2_PCS_RX_SIGDET_LVL			0x1d8

drivers/phy/qualcomm/phy-qcom-qmp-usb.c

@@ -54,9 +54,6 @@
 /* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
 #define IRQ_CLEAR				BIT(0)
 
-/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
-#define RCVR_DETECT				BIT(0)
-
 /* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
 #define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
 
@@ -94,7 +91,6 @@ enum qphy_reg_layout {
 	QPHY_PCS_STATUS,
 	QPHY_PCS_AUTONOMOUS_MODE_CTRL,
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
-	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
 	/* PCS_MISC registers */
 	QPHY_PCS_MISC_TYPEC_CTRL,
@@ -108,7 +104,6 @@ static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_STATUS]		= 0x17c,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d4,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0d8,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
 };
 
@@ -118,7 +113,6 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_STATUS]		= 0x174,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
 };