drm/i915/vlv: Make the vlv_dpio_read/vlv_dpio_write more PHY centric

vlv_dpio_read/write should be describe more in PHY centric instead of
display controller centric.
Create a enum dpio_channel for channel index and enum dpio_phy for PHY
index.  This should better to gather for upcoming platform.

v2: Rebase the code based on
drm/i915/vlv: Fix typo in the DPIO register define.

v3: Rename vlv_phy to dpio_phy_iosf_port and define additional macro
DPIO_PHY, and remove unrelated change. (Ville)

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -88,6 +88,18 @@ enum port {
 };
 #define port_name(p) ((p) + 'A')
 
+#define I915_NUM_PHYS_VLV 1
+
+enum dpio_channel {
+	DPIO_CH0,
+	DPIO_CH1
+};
+
+enum dpio_phy {
+	DPIO_PHY0,
+	DPIO_PHY1
+};
+
 enum intel_display_power_domain {
 	POWER_DOMAIN_PIPE_A,
 	POWER_DOMAIN_PIPE_B,
@@ -1403,6 +1415,7 @@ typedef struct drm_i915_private {
 	int num_shared_dpll;
 	struct intel_shared_dpll shared_dplls[I915_NUM_PLLS];
 	struct intel_ddi_plls ddi_plls;
+	int dpio_phy_iosf_port[I915_NUM_PHYS_VLV];
 
 	/* Reclocking support */
 	bool render_reclock_avail;

drivers/gpu/drm/i915/i915_reg.h

@@ -452,6 +452,9 @@
 #define  DPIO_SFR_BYPASS		(1<<1)
 #define  DPIO_CMNRST			(1<<0)
 
+#define DPIO_PHY(pipe)			((pipe) >> 1)
+#define DPIO_PHY_IOSF_PORT(phy)		(dev_priv->dpio_phy_iosf_port[phy])
+
 /*
  * Per pipe/PLL DPIO regs
  */

drivers/gpu/drm/i915/intel_display.c

@@ -1361,6 +1361,7 @@ static void intel_init_dpio(struct drm_device *dev)
 	if (!IS_VALLEYVIEW(dev))
 		return;
 
+	DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
 	/*
 	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
 	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
@@ -1494,18 +1495,25 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 	POSTING_READ(DPLL(pipe));
 }
 
-void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
+void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
+		struct intel_digital_port *dport)
 {
 	u32 port_mask;
 
-	if (!port)
+	switch (dport->port) {
+	case PORT_B:
 		port_mask = DPLL_PORTB_READY_MASK;
-	else
+		break;
+	case PORT_C:
 		port_mask = DPLL_PORTC_READY_MASK;
+		break;
+	default:
+		BUG();
+	}
 
 	if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
 		WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
-		     'B' + port, I915_READ(DPLL(0)));
+		     'B' + dport->port, I915_READ(DPLL(0)));
 }
 
 /**

drivers/gpu/drm/i915/intel_dp.c

@@ -1839,7 +1839,7 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
-	int port = vlv_dport_to_channel(dport);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 	struct edp_power_seq power_seq;
 	u32 val;
@@ -1866,7 +1866,7 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
 
 	intel_enable_dp(encoder);
 
-	vlv_wait_port_ready(dev_priv, port);
+	vlv_wait_port_ready(dev_priv, dport);
 }
 
 static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
@@ -1876,7 +1876,7 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(encoder->base.crtc);
-	int port = vlv_dport_to_channel(dport);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 
 	/* Program Tx lane resets to default */
@@ -2033,7 +2033,7 @@ static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
 	unsigned long demph_reg_value, preemph_reg_value,
 		uniqtranscale_reg_value;
 	uint8_t train_set = intel_dp->train_set[0];
-	int port = vlv_dport_to_channel(dport);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 
 	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {

drivers/gpu/drm/i915/intel_drv.h

@@ -490,9 +490,9 @@ vlv_dport_to_channel(struct intel_digital_port *dport)
 {
 	switch (dport->port) {
 	case PORT_B:
-		return 0;
+		return DPIO_CH0;
 	case PORT_C:
-		return 1;
+		return DPIO_CH1;
 	default:
 		BUG();
 	}
@@ -637,7 +637,8 @@ enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
 void intel_wait_for_vblank(struct drm_device *dev, int pipe);
 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe);
 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
-void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port);
+void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
+			 struct intel_digital_port *dport);
 bool intel_get_load_detect_pipe(struct drm_connector *connector,
 				struct drm_display_mode *mode,
 				struct intel_load_detect_pipe *old);

drivers/gpu/drm/i915/intel_hdmi.c

@@ -1081,7 +1081,7 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(encoder->base.crtc);
-	int port = vlv_dport_to_channel(dport);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 	u32 val;
 
@@ -1116,7 +1116,7 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
 
 	intel_enable_hdmi(encoder);
 
-	vlv_wait_port_ready(dev_priv, port);
+	vlv_wait_port_ready(dev_priv, dport);
 }
 
 static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
@@ -1126,7 +1126,7 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(encoder->base.crtc);
-	int port = vlv_dport_to_channel(dport);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 
 	if (!IS_VALLEYVIEW(dev))
@@ -1159,7 +1159,7 @@ static void vlv_hdmi_post_disable(struct intel_encoder *encoder)
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(encoder->base.crtc);
-	int port = vlv_dport_to_channel(dport);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
 
 	/* Reset lanes to avoid HDMI flicker (VLV w/a) */

drivers/gpu/drm/i915/intel_sideband.c

@@ -176,27 +176,18 @@ void vlv_gps_core_write(struct drm_i915_private *dev_priv, u32 reg, u32 val)
 			PUNIT_OPCODE_REG_WRITE, reg, &val);
 }
 
-static u32 vlv_get_phy_port(enum pipe pipe)
-{
-	u32 port = IOSF_PORT_DPIO;
-
-	WARN_ON ((pipe != PIPE_A) && (pipe != PIPE_B));
-
-	return port;
-}
-
 u32 vlv_dpio_read(struct drm_i915_private *dev_priv, enum pipe pipe, int reg)
 {
 	u32 val = 0;
 
-	vlv_sideband_rw(dev_priv, DPIO_DEVFN, vlv_get_phy_port(pipe),
+	vlv_sideband_rw(dev_priv, DPIO_DEVFN, DPIO_PHY_IOSF_PORT(DPIO_PHY(pipe)),
 			DPIO_OPCODE_REG_READ, reg, &val);
 	return val;
 }
 
 void vlv_dpio_write(struct drm_i915_private *dev_priv, enum pipe pipe, int reg, u32 val)
 {
-	vlv_sideband_rw(dev_priv, DPIO_DEVFN, vlv_get_phy_port(pipe),
+	vlv_sideband_rw(dev_priv, DPIO_DEVFN, DPIO_PHY_IOSF_PORT(DPIO_PHY(pipe)),
 			DPIO_OPCODE_REG_WRITE, reg, &val);
 }