ARM: dts: add buffalo linkstation ls-wxl/wsxl
Add dts file to support Buffalo Linkstation LS-WXL and LS-WSXL, which are 2-bay NAS with 3.5" and 2.5" HDD respectively. Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit is contained in:
Roger Shimizu
Gregory CLEMENT
Родитель
c8f5a878e5
Коммит
e54e4b1b62
|
|
@ -20,6 +20,7 @@ And in addition, the compatible shall be extended with the specific
|
|||
board. Currently known boards are:
|
||||
|
||||
"buffalo,lschlv2"
|
||||
"buffalo,lswxl"
|
||||
"buffalo,lsxhl"
|
||||
"buffalo,lsxl"
|
||||
"dlink,dns-320"
|
||||
|
|
|
|||
|
|
@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
|||
kirkwood-km_kirkwood.dtb \
|
||||
kirkwood-laplug.dtb \
|
||||
kirkwood-lschlv2.dtb \
|
||||
kirkwood-lswxl.dtb \
|
||||
kirkwood-lsxhl.dtb \
|
||||
kirkwood-mplcec4.dtb \
|
||||
kirkwood-mv88f6281gtw-ge.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,301 @@
|
|||
/*
|
||||
* Device Tree file for Buffalo Linkstation LS-WXL/WSXL
|
||||
*
|
||||
* Copyright (C) 2015, rogershimizu@gmail.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo Linkstation LS-WXL/WSXL";
|
||||
compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory { /* 128 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
mbus {
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
pinctrl: pin-controller@10000 {
|
||||
pmx_power_hdd0: pmx-power-hdd0 {
|
||||
marvell,pins = "mpp28";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_hdd1: pmx-power-hdd1 {
|
||||
marvell,pins = "mpp29";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_usb_vbus: pmx-usb-vbus {
|
||||
marvell,pins = "mpp37";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_high: pmx-fan-high {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_low: pmx-fan-low {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr0: pmx-led-hdderr0 {
|
||||
marvell,pins = "mpp8";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_hdderr1: pmx-led-hdderr1 {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_alarm: pmx-led-alarm {
|
||||
marvell,pins = "mpp49";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_red: pmx-led-function-red {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_function_blue: pmx-led-function-blue {
|
||||
marvell,pins = "mpp36";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_info: pmx-led-info {
|
||||
marvell,pins = "mpp38";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_led_power: pmx-led-power {
|
||||
marvell,pins = "mpp39";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_fan_lock: pmx-fan-lock {
|
||||
marvell,pins = "mpp40";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,pins = "mpp41";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_switch: pmx-power-switch {
|
||||
marvell,pins = "mpp42";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_power_auto_switch: pmx-power-auto-switch {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
|
||||
m25p40@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p40", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x60000>;
|
||||
label = "uboot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
reg = <0x60000 0x10000>;
|
||||
label = "dtb";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@70000 {
|
||||
reg = <0x70000 0x10000>;
|
||||
label = "uboot_env";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
||||
&pmx_power_auto_switch>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button@1 {
|
||||
label = "Function Button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@2 {
|
||||
label = "Power-on Switch";
|
||||
linux,code = <KEY_RESERVED>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@3 {
|
||||
label = "Power-auto Switch";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
||||
&pmx_led_info &pmx_led_power
|
||||
&pmx_led_function_blue
|
||||
&pmx_led_hdderr0
|
||||
&pmx_led_hdderr1>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led@1 {
|
||||
label = "lswxl:blue:func";
|
||||
gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
label = "lswxl:red:alarm";
|
||||
gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
label = "lswxl:amber:info";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
label = "lswxl:blue:power";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "lswxl:red:func";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
led@6 {
|
||||
label = "lswxl:red:hdderr0";
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@7 {
|
||||
label = "lswxl:red:hdderr1";
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_fan {
|
||||
compatible = "gpio-fan";
|
||||
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpios = <&gpio0 47 GPIO_ACTIVE_LOW
|
||||
&gpio0 48 GPIO_ACTIVE_LOW>;
|
||||
|
||||
gpio-fan,speed-map = <0 3
|
||||
1500 2
|
||||
3250 1
|
||||
5000 0>;
|
||||
|
||||
alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
restart_poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
usb_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "USB Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
hdd_power0: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "HDD0 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
hdd_power1: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "HDD1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy1: ethernet-phy@8 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
ethernet1-port@0 {
|
||||
phy-handle = <ðphy1>;
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче