mvebu dt changes for v4.2 (part #2)
Add 2 new set boards: - Armada 385 based Linksys boards - DLink DNS-327L Update the spi-nor flash compatible strings Use improved armada spi device tree compatible name for each mvebu SoC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlVo3bwACgkQCwYYjhRyO9UxNgCgn5KoYMnx0qzbbmc7rfoyd9g3 IF8An0yb+2EFpP7SBPu41s8rXOATCCTb =APjz -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.2-2' of git://git.infradead.org/linux-mvebu into next/dt Merge "mvebu dt changes for v4.2 (part #2)" from Gregory CLEMENT: Add 2 new set boards: - Armada 385 based Linksys boards - DLink DNS-327L Update the spi-nor flash compatible strings Use improved armada spi device tree compatible name for each mvebu SoC * tag 'mvebu-dt-4.2-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: use improved armada spi device tree compatible name for each SoC ARM: mvebu: dts: Add dts file for DLink DNS-327L ARM: mvebu: add "jedec,spi-nor" flash compatible binding ARM: kirkwood: add "jedec,spi-nor" flash compatible binding ARM: mvebu: add support for the new Armada 385 based Linksys boards
This commit is contained in:
Arnd Bergmann
Коммит
e59bff9af4
|
|
@ -652,6 +652,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
|
|||
zynq-zybo.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_370) += \
|
||||
armada-370-db.dtb \
|
||||
armada-370-dlink-dns327l.dtb \
|
||||
armada-370-mirabox.dtb \
|
||||
armada-370-netgear-rn102.dtb \
|
||||
armada-370-netgear-rn104.dtb \
|
||||
|
|
@ -661,6 +662,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
|
|||
armada-375-db.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_38X) += \
|
||||
armada-385-db-ap.dtb \
|
||||
armada-385-linksys-caiman.dtb \
|
||||
armada-385-linksys-cobra.dtb \
|
||||
armada-388-db.dtb \
|
||||
armada-388-gp.dtb \
|
||||
armada-388-rd.dtb
|
||||
|
|
|
|||
|
|
@ -162,7 +162,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mx25l25635e";
|
||||
compatible = "mx25l25635e", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,357 @@
|
|||
/*
|
||||
* Device Tree file for D-Link DNS-327L
|
||||
*
|
||||
* Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/* Remaining unsolved:
|
||||
* There's still some unknown device on i2c address 0x13
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "armada-370.dtsi"
|
||||
|
||||
/ {
|
||||
model = "D-Link DNS-327L";
|
||||
compatible = "dlink,dns327l",
|
||||
"marvell,armada370",
|
||||
"marvell,armada-370-xp";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* 512 MiB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
||||
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
pcie@1,0 {
|
||||
/* Port 0, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@2,0 {
|
||||
/* Port 1, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
sata@a0000 {
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
/* 1.0 MiB */
|
||||
reg = <0x0000000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
/* 128 KiB */
|
||||
reg = <0x100000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
label = "uImage";
|
||||
/* 7 MiB */
|
||||
reg = <0x120000 0x700000>;
|
||||
};
|
||||
|
||||
partition@820000 {
|
||||
label = "ubifs";
|
||||
/* ~ 84 MiB */
|
||||
reg = <0x820000 0x54e0000>;
|
||||
};
|
||||
|
||||
/* Hardcoded into stock bootloader */
|
||||
partition@5d00000 {
|
||||
label = "failsafe-uImage";
|
||||
/* 5 MiB */
|
||||
reg = <0x5d00000 0x500000>;
|
||||
};
|
||||
|
||||
partition@6200000 {
|
||||
label = "failsafe-fs";
|
||||
/* 29 MiB */
|
||||
reg = <0x6200000 0x1d00000>;
|
||||
};
|
||||
|
||||
partition@7f00000 {
|
||||
label = "bbt";
|
||||
/* 1 MiB for BBT */
|
||||
reg = <0x7f00000 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <
|
||||
&backup_button_pin
|
||||
&power_button_pin
|
||||
&reset_button_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power-button {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
backup-button {
|
||||
label = "Backup Button";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset-button {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <
|
||||
&sata_l_amber_pin
|
||||
&sata_r_amber_pin
|
||||
&backup_led_pin
|
||||
/* Ensure these are managed by hardware */
|
||||
&sata_l_white_pin
|
||||
&sata_r_white_pin>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
|
||||
sata-r-amber-pin {
|
||||
label = "dns327l:amber:sata-r";
|
||||
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
sata-l-amber-pin {
|
||||
label = "dns327l:amber:sata-l";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
backup-led-pin {
|
||||
label = "dns327l:white:usb";
|
||||
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
pinctrl-0 = <&xhci_pwr_pin>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "USB3.0 Port Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sata_r_power: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
pinctrl-0 = <&sata_r_pwr_pin>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "SATA-R Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
startup-delay-us = <2000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sata_l_power: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
pinctrl-0 = <&sata_l_pwr_pin>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "SATA-L Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
startup-delay-us = <4000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sata_l_white_pin: sata-l-white-pin {
|
||||
marvell,pins = "mpp57";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
|
||||
sata_r_white_pin: sata-r-white-pin {
|
||||
marvell,pins = "mpp55";
|
||||
marvell,function = "sata1";
|
||||
};
|
||||
|
||||
sata_r_amber_pin: sata-r-amber-pin {
|
||||
marvell,pins = "mpp52";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata_l_amber_pin: sata-l-amber-pin {
|
||||
marvell,pins = "mpp53";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
backup_led_pin: backup-led-pin {
|
||||
marvell,pins = "mpp61";
|
||||
marvell,function = "gpo";
|
||||
};
|
||||
|
||||
xhci_pwr_pin: xhci-pwr-pin {
|
||||
marvell,pins = "mpp13";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata_r_pwr_pin: sata-r-pwr-pin {
|
||||
marvell,pins = "mpp54";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata_l_pwr_pin: sata-l-pwr-pin {
|
||||
marvell,pins = "mpp56";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins {
|
||||
marvell,pins = "mpp60", "mpp61";
|
||||
marvell,function = "uart1";
|
||||
};
|
||||
|
||||
power_button_pin: power-button-pin {
|
||||
marvell,pins = "mpp65";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
backup_button_pin: backup-button-pin {
|
||||
marvell,pins = "mpp63";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
reset_button_pin: reset-button-pin {
|
||||
marvell,pins = "mpp64";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
/* Serial console */
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Connected to Weltrend MCU */
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
||||
reg = <0>;
|
||||
marvell,reg-init = <0x0 0x16 0x0 0x0002>,
|
||||
<0x0 0x19 0x0 0x0077>,
|
||||
<0x0 0x18 0x0 0x5747>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
compatible = "marvell,mv64xxx-i2c";
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -92,7 +92,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "micron,n25q064";
|
||||
compatible = "micron,n25q064", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <20000000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -149,7 +149,6 @@
|
|||
};
|
||||
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,armada-370-spi", "marvell,orion-spi";
|
||||
reg = <0x10600 0x28>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -160,7 +159,6 @@
|
|||
};
|
||||
|
||||
spi1: spi@10680 {
|
||||
compatible = "marvell,armada-370-spi", "marvell,orion-spi";
|
||||
reg = <0x10680 0x28>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -139,11 +139,15 @@
|
|||
* board level if a different configuration is used.
|
||||
*/
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,armada-370-spi",
|
||||
"marvell,orion-spi";
|
||||
pinctrl-0 = <&spi0_pins1>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
spi1: spi@10680 {
|
||||
compatible = "marvell,armada-370-spi",
|
||||
"marvell,orion-spi";
|
||||
pinctrl-0 = <&spi1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -81,7 +81,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "n25q128a13";
|
||||
compatible = "n25q128a13", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <108000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -238,7 +238,8 @@
|
|||
};
|
||||
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
compatible = "marvell,armada-375-spi",
|
||||
"marvell,orion-spi";
|
||||
reg = <0x10600 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -249,7 +250,8 @@
|
|||
};
|
||||
|
||||
spi1: spi@10680 {
|
||||
compatible = "marvell,orion-spi";
|
||||
compatible = "marvell,armada-375-spi",
|
||||
"marvell,orion-spi";
|
||||
reg = <0x10680 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -70,7 +70,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p128";
|
||||
compatible = "st,m25p128", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <54000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,114 @@
|
|||
/*
|
||||
* Device Tree include for the Linksys WRT1200AC (Caiman)
|
||||
*
|
||||
* Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
|
||||
*
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-385-linksys.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys WRT1200AC";
|
||||
compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
|
||||
"marvell,armada380";
|
||||
|
||||
soc {
|
||||
internal-regs{
|
||||
i2c@11000 {
|
||||
|
||||
pca9635@68 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wan_amber@0 {
|
||||
label = "caiman:amber:wan";
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
wan_white@1 {
|
||||
label = "caiman:white:wan";
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
wlan_2g@2 {
|
||||
label = "caiman:white:wlan_2g";
|
||||
reg = <0x2>;
|
||||
};
|
||||
|
||||
wlan_5g@3 {
|
||||
label = "caiman:white:wlan_5g";
|
||||
reg = <0x3>;
|
||||
};
|
||||
|
||||
usb2@5 {
|
||||
label = "caiman:white:usb2";
|
||||
reg = <0x5>;
|
||||
};
|
||||
|
||||
usb3_1@6 {
|
||||
label = "caiman:white:usb3_1";
|
||||
reg = <0x6>;
|
||||
};
|
||||
|
||||
usb3_2@7 {
|
||||
label = "caiman:white:usb3_2";
|
||||
reg = <0x7>;
|
||||
};
|
||||
|
||||
wps_white@8 {
|
||||
label = "caiman:white:wps";
|
||||
reg = <0x8>;
|
||||
};
|
||||
|
||||
wps_amber@9 {
|
||||
label = "caiman:amber:wps";
|
||||
reg = <0x9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
power {
|
||||
label = "caiman:white:power";
|
||||
};
|
||||
|
||||
sata {
|
||||
label = "caiman:white:sata";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,114 @@
|
|||
/*
|
||||
* Device Tree file for the Linksys WRT1900ACv2 (Cobra)
|
||||
*
|
||||
* Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
|
||||
*
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-385-linksys.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys WRT1900ACv2";
|
||||
compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
|
||||
"marvell,armada380";
|
||||
|
||||
soc {
|
||||
internal-regs{
|
||||
i2c@11000 {
|
||||
|
||||
pca9635@68 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wan_amber@0 {
|
||||
label = "cobra:amber:wan";
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
wan_white@1 {
|
||||
label = "cobra:white:wan";
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
wlan_2g@2 {
|
||||
label = "cobra:white:wlan_2g";
|
||||
reg = <0x2>;
|
||||
};
|
||||
|
||||
wlan_5g@3 {
|
||||
label = "cobra:white:wlan_5g";
|
||||
reg = <0x3>;
|
||||
};
|
||||
|
||||
usb2@5 {
|
||||
label = "cobra:white:usb2";
|
||||
reg = <0x5>;
|
||||
};
|
||||
|
||||
usb3_1@6 {
|
||||
label = "cobra:white:usb3_1";
|
||||
reg = <0x6>;
|
||||
};
|
||||
|
||||
usb3_2@7 {
|
||||
label = "cobra:white:usb3_2";
|
||||
reg = <0x7>;
|
||||
};
|
||||
|
||||
wps_white@8 {
|
||||
label = "cobra:white:wps";
|
||||
reg = <0x8>;
|
||||
};
|
||||
|
||||
wps_amber@9 {
|
||||
label = "cobra:amber:wps";
|
||||
reg = <0x9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
power {
|
||||
label = "cobra:white:power";
|
||||
};
|
||||
|
||||
sata {
|
||||
label = "cobra:white:sata";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,332 @@
|
|||
/*
|
||||
* Device Tree include file for Armada 385 based Linksys boards
|
||||
*
|
||||
* Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
|
||||
*
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "armada-385.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys boards based on Armada 385";
|
||||
compatible = "linksys,armada385", "marvell,armada385",
|
||||
"marvell,armada380";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
|
||||
|
||||
internal-regs {
|
||||
|
||||
spi@10600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
tmp421@4c {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
pca9635@68 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "nxp,pca9635";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
/* J10: VCC, NC, RX, NC, TX, GND */
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-id";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@34000 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
mdio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@a8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB part of the eSATA/USB 2.0 port */
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
status = "okay";
|
||||
usb-phy = <&usb3_phy>;
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KB */
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KB */
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MB */
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MB */
|
||||
};
|
||||
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 38MB, last MB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
pcie@1,0 {
|
||||
/* Marvell 88W8864, 5GHz-only */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@2,0 {
|
||||
/* Marvell 88W8864, 2GHz-only */
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb3_phy: usb3_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_xhci0_vbus>;
|
||||
};
|
||||
|
||||
reg_xhci0_vbus: xhci0-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&xhci0_vbus_pins>;
|
||||
regulator-name = "xhci0-vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&keys_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button@1 {
|
||||
label = "WPS";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button@2 {
|
||||
label = "Factory Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&power_led_pin &sata_led_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
sata {
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
dsa@0 {
|
||||
compatible = "marvell,dsa";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dsa,ethernet = <ð2>;
|
||||
dsa,mii-bus = <&mdio>;
|
||||
|
||||
switch@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "cpu";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
keys_pin: keys-pin {
|
||||
marvell,pins = "mpp24", "mpp47";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
power_led_pin: power-led-pin {
|
||||
marvell,pins = "mpp55";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
sata_led_pin: sata-led-pin {
|
||||
marvell,pins = "mpp54";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
xhci0_vbus_pins: xhci0-vbus-pins {
|
||||
marvell,pins = "mpp50";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
|
@ -73,7 +73,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "w25q32";
|
||||
compatible = "w25q32", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <108000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -69,7 +69,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p128";
|
||||
compatible = "st,m25p128", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p128";
|
||||
compatible = "st,m25p128", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <108000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -167,7 +167,8 @@
|
|||
};
|
||||
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
compatible = "marvell,armada-380-spi",
|
||||
"marvell,orion-spi";
|
||||
reg = <0x10600 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -178,7 +179,8 @@
|
|||
};
|
||||
|
||||
spi1: spi@10680 {
|
||||
compatible = "marvell,orion-spi";
|
||||
compatible = "marvell,armada-380-spi",
|
||||
"marvell,orion-spi";
|
||||
reg = <0x10680 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -73,7 +73,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "n25q128a13";
|
||||
compatible = "n25q128a13", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <108000000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -128,7 +128,8 @@
|
|||
};
|
||||
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
compatible = "marvell,armada-390-spi",
|
||||
"marvell,orion-spi";
|
||||
reg = <0x10600 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -139,7 +140,8 @@
|
|||
};
|
||||
|
||||
spi1: spi@10680 {
|
||||
compatible = "marvell,orion-spi";
|
||||
compatible = "marvell,armada-390-spi",
|
||||
"marvell,orion-spi";
|
||||
reg = <0x10680 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -140,7 +140,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "n25q128a13";
|
||||
compatible = "n25q128a13", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <108000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -222,7 +222,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p64";
|
||||
compatible = "m25p64", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <20000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -227,7 +227,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "n25q128a13";
|
||||
compatible = "n25q128a13", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <108000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -114,7 +114,7 @@
|
|||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "micron,n25q064";
|
||||
compatible = "micron,n25q064", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <20000000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -85,10 +85,18 @@
|
|||
};
|
||||
|
||||
spi0: spi@10600 {
|
||||
compatible = "marvell,armada-xp-spi",
|
||||
"marvell,orion-spi";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
spi1: spi@10680 {
|
||||
compatible = "marvell,armada-xp-spi",
|
||||
"marvell,orion-spi";
|
||||
};
|
||||
|
||||
|
||||
i2c0: i2c@11000 {
|
||||
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
||||
reg = <0x11000 0x100>;
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
m25p16@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p16";
|
||||
compatible = "st,m25p16", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l4005a";
|
||||
compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -93,7 +93,7 @@
|
|||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l12805d";
|
||||
compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@
|
|||
m25p40@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l1606e";
|
||||
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
m25p40@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p40";
|
||||
compatible = "m25p40", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -65,7 +65,7 @@
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l12805d";
|
||||
compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l4005a";
|
||||
compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l4005a";
|
||||
compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -61,7 +61,7 @@
|
|||
m25p128@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p128";
|
||||
compatible = "st,m25p128", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -217,7 +217,7 @@
|
|||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p80";
|
||||
compatible = "st,m25p80", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -88,7 +88,7 @@
|
|||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p80";
|
||||
compatible = "st,m25p80", "jedec,spi-nor";
|
||||
spi-max-frequency = <86000000>;
|
||||
reg = <0>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@
|
|||
m25p128@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p128";
|
||||
compatible = "m25p128", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче