From 687ef9817df7ed960d14575b9033dde3d04631fe Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 10:30:33 -0500 Subject: [PATCH 001/314] usb: dwc3: gadget: clear stall when disabling endpoint so it seems like DWC3 IP doesn't clear stalls automatically when we disable an endpoint, because of that, we _must_ make sure stalls are cleared before clearing the proper bit in DALEPENA register. Cc: # v3.4+ Reported-by: Johannes Stezenbach Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a740eac74d56..f0dc0ee85ded 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -608,6 +608,10 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dwc3_remove_requests(dwc, dep); + /* make sure HW endpoint isn't stalled */ + if (dep->flags & DWC3_EP_STALL) + __dwc3_gadget_ep_set_halt(dep, 0); + reg = dwc3_readl(dwc->regs, DWC3_DALEPENA); reg &= ~DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); From 3c9f94aca66aa8c83d531961ea8c7b8bace9433c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 15:08:29 -0500 Subject: [PATCH 002/314] usb: dwc3: core: refactor PHY initialization our probe() routine is too large and we can easily refactor PHY-related code out to another function to make it slightly less painful to read. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 120 ++++++++++++++++++++++------------------ 1 file changed, 66 insertions(+), 54 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index d001417e8e37..38976f3123d3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -486,70 +486,20 @@ static void dwc3_core_exit(struct dwc3 *dwc) phy_exit(dwc->usb3_generic_phy); } -#define DWC3_ALIGN_MASK (16 - 1) - -static int dwc3_probe(struct platform_device *pdev) +static int dwc3_core_get_phy(struct dwc3 *dwc) { - struct device *dev = &pdev->dev; - struct dwc3_platform_data *pdata = dev_get_platdata(dev); + struct device *dev = dwc->dev; struct device_node *node = dev->of_node; - struct resource *res; - struct dwc3 *dwc; - - int ret = -ENOMEM; - - void __iomem *regs; - void *mem; - - mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); - if (!mem) { - dev_err(dev, "not enough memory\n"); - return -ENOMEM; - } - dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); - dwc->mem = mem; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(dev, "missing IRQ\n"); - return -ENODEV; - } - dwc->xhci_resources[1].start = res->start; - dwc->xhci_resources[1].end = res->end; - dwc->xhci_resources[1].flags = res->flags; - dwc->xhci_resources[1].name = res->name; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing memory resource\n"); - return -ENODEV; - } + int ret; if (node) { - dwc->maximum_speed = of_usb_get_maximum_speed(node); - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1); - - dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); - dwc->dr_mode = of_usb_get_dr_mode(node); - } else if (pdata) { - dwc->maximum_speed = pdata->maximum_speed; - - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); - - dwc->needs_fifo_resize = pdata->tx_fifo_resize; - dwc->dr_mode = pdata->dr_mode; } else { dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); } - /* default to superspeed if no maximum_speed passed */ - if (dwc->maximum_speed == USB_SPEED_UNKNOWN) - dwc->maximum_speed = USB_SPEED_SUPER; - if (IS_ERR(dwc->usb2_phy)) { ret = PTR_ERR(dwc->usb2_phy); if (ret == -ENXIO || ret == -ENODEV) { @@ -600,6 +550,69 @@ static int dwc3_probe(struct platform_device *pdev) } } + return 0; +} + +#define DWC3_ALIGN_MASK (16 - 1) + +static int dwc3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dwc3_platform_data *pdata = dev_get_platdata(dev); + struct device_node *node = dev->of_node; + struct resource *res; + struct dwc3 *dwc; + + int ret = -ENOMEM; + + void __iomem *regs; + void *mem; + + mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); + if (!mem) { + dev_err(dev, "not enough memory\n"); + return -ENOMEM; + } + dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); + dwc->mem = mem; + dwc->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "missing IRQ\n"); + return -ENODEV; + } + dwc->xhci_resources[1].start = res->start; + dwc->xhci_resources[1].end = res->end; + dwc->xhci_resources[1].flags = res->flags; + dwc->xhci_resources[1].name = res->name; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing memory resource\n"); + return -ENODEV; + } + + if (node) { + dwc->maximum_speed = of_usb_get_maximum_speed(node); + + dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); + dwc->dr_mode = of_usb_get_dr_mode(node); + } else if (pdata) { + dwc->maximum_speed = pdata->maximum_speed; + + dwc->needs_fifo_resize = pdata->tx_fifo_resize; + dwc->dr_mode = pdata->dr_mode; + } + + /* default to superspeed if no maximum_speed passed */ + if (dwc->maximum_speed == USB_SPEED_UNKNOWN) + dwc->maximum_speed = USB_SPEED_SUPER; + + ret = dwc3_core_get_phy(dwc); + if (ret) + return ret; + dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; @@ -621,7 +634,6 @@ static int dwc3_probe(struct platform_device *pdev) dwc->regs = regs; dwc->regs_size = resource_size(res); - dwc->dev = dev; dev->dma_mask = dev->parent->dma_mask; dev->dma_parms = dev->parent->dma_parms; From 041832565e405d2e2ea218632b7bcafa87deaece Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 17 Apr 2014 11:24:27 -0500 Subject: [PATCH 003/314] usb: phy: mv-u3d: switch over to writel/readl by removing the _relaxed suffix, we can build this driver in other architectures. Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mv-u3d-usb.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c index d317903022bf..d342175eead7 100644 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -39,8 +39,8 @@ static u32 mv_u3d_phy_read(void __iomem *base, u32 reg) addr = base; data = base + 0x4; - writel_relaxed(reg, addr); - return readl_relaxed(data); + writel(reg, addr); + return readl(data); } static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) @@ -51,10 +51,10 @@ static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) addr = base; data = base + 0x4; - writel_relaxed(reg, addr); - tmp = readl_relaxed(data); + writel(reg, addr); + tmp = readl(data); tmp |= value; - writel_relaxed(tmp, data); + writel(tmp, data); } static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) @@ -65,10 +65,10 @@ static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) addr = base; data = base + 0x4; - writel_relaxed(reg, addr); - tmp = readl_relaxed(data); + writel(reg, addr); + tmp = readl(data); tmp &= ~value; - writel_relaxed(tmp, data); + writel(tmp, data); } static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) @@ -78,8 +78,8 @@ static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) addr = base; data = base + 0x4; - writel_relaxed(reg, addr); - writel_relaxed(value, data); + writel(reg, addr); + writel(value, data); } static void mv_u3d_phy_shutdown(struct usb_phy *phy) From 5f94adfeed97a62f31a25d14effc6ac13c847333 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 15:13:45 -0500 Subject: [PATCH 004/314] usb: dwc3: core: refactor mode initialization to its own function Move mode (Host, Peripheral, OTG) initialization to its own function in order to decrease the size of our probe() routine. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 133 ++++++++++++++++++++-------------------- 1 file changed, 67 insertions(+), 66 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 38976f3123d3..af8c8f6e67b3 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -553,6 +553,69 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) return 0; } +static int dwc3_core_init_mode(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + int ret; + + switch (dwc->dr_mode) { + case USB_DR_MODE_PERIPHERAL: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); + ret = dwc3_gadget_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize gadget\n"); + return ret; + } + break; + case USB_DR_MODE_HOST: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); + ret = dwc3_host_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + break; + case USB_DR_MODE_OTG: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); + ret = dwc3_host_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + + ret = dwc3_gadget_init(dwc); + if (ret) { + dev_err(dev, "failed to initialize gadget\n"); + return ret; + } + break; + default: + dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); + return -EINVAL; + } + + return 0; +} + +static void dwc3_core_exit_mode(struct dwc3 *dwc) +{ + switch (dwc->dr_mode) { + case USB_DR_MODE_PERIPHERAL: + dwc3_gadget_exit(dwc); + break; + case USB_DR_MODE_HOST: + dwc3_host_exit(dwc); + break; + case USB_DR_MODE_OTG: + dwc3_host_exit(dwc); + dwc3_gadget_exit(dwc); + break; + default: + /* do nothing */ + break; + } +} + #define DWC3_ALIGN_MASK (16 - 1) static int dwc3_probe(struct platform_device *pdev) @@ -682,41 +745,9 @@ static int dwc3_probe(struct platform_device *pdev) goto err_usb3phy_power; } - switch (dwc->dr_mode) { - case USB_DR_MODE_PERIPHERAL: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); - ret = dwc3_gadget_init(dwc); - if (ret) { - dev_err(dev, "failed to initialize gadget\n"); - goto err2; - } - break; - case USB_DR_MODE_HOST: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); - ret = dwc3_host_init(dwc); - if (ret) { - dev_err(dev, "failed to initialize host\n"); - goto err2; - } - break; - case USB_DR_MODE_OTG: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); - ret = dwc3_host_init(dwc); - if (ret) { - dev_err(dev, "failed to initialize host\n"); - goto err2; - } - - ret = dwc3_gadget_init(dwc); - if (ret) { - dev_err(dev, "failed to initialize gadget\n"); - goto err2; - } - break; - default: - dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); + ret = dwc3_core_init_mode(dwc); + if (ret) goto err2; - } ret = dwc3_debugfs_init(dwc); if (ret) { @@ -729,21 +760,7 @@ static int dwc3_probe(struct platform_device *pdev) return 0; err3: - switch (dwc->dr_mode) { - case USB_DR_MODE_PERIPHERAL: - dwc3_gadget_exit(dwc); - break; - case USB_DR_MODE_HOST: - dwc3_host_exit(dwc); - break; - case USB_DR_MODE_OTG: - dwc3_host_exit(dwc); - dwc3_gadget_exit(dwc); - break; - default: - /* do nothing */ - break; - } + dwc3_core_exit_mode(dwc); err2: dwc3_event_buffers_cleanup(dwc); @@ -778,23 +795,7 @@ static int dwc3_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); dwc3_debugfs_exit(dwc); - - switch (dwc->dr_mode) { - case USB_DR_MODE_PERIPHERAL: - dwc3_gadget_exit(dwc); - break; - case USB_DR_MODE_HOST: - dwc3_host_exit(dwc); - break; - case USB_DR_MODE_OTG: - dwc3_host_exit(dwc); - dwc3_gadget_exit(dwc); - break; - default: - /* do nothing */ - break; - } - + dwc3_core_exit_mode(dwc); dwc3_event_buffers_cleanup(dwc); dwc3_free_event_buffers(dwc); dwc3_core_exit(dwc); From 0700faaf736492bd203630d179b639a1f5bbb576 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 1 Apr 2014 13:19:32 -0500 Subject: [PATCH 005/314] usb: gadget: only GPL drivers in the gadget and phy framework We only support GPL drivers in the USB Gadget Framework, it sounds correct to make all exported symbols GPL too. Acked-by: Greg Kroah-Hartman Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 2 +- drivers/usb/gadget/f_fs.c | 6 ++-- drivers/usb/gadget/f_rndis.c | 2 +- drivers/usb/gadget/rndis.c | 28 ++++++++-------- drivers/usb/gadget/storage_common.c | 52 ++++++++++++++--------------- drivers/usb/gadget/u_ether.c | 32 +++++++++--------- drivers/usb/gadget/u_f.c | 2 +- drivers/usb/phy/phy-generic.c | 4 +-- 8 files changed, 64 insertions(+), 64 deletions(-) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 7d1cc01796b6..dcead559a61e 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1005,7 +1005,7 @@ void unregister_gadget_item(struct config_item *item) unregister_gadget(gi); } -EXPORT_SYMBOL(unregister_gadget_item); +EXPORT_SYMBOL_GPL(unregister_gadget_item); static int __init gadget_cfs_init(void) { diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 2e164dca08e8..a01b3bd8fa00 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -190,7 +190,7 @@ ffs_sb_create_file(struct super_block *sb, const char *name, void *data, /* Devices management *******************************************************/ DEFINE_MUTEX(ffs_lock); -EXPORT_SYMBOL(ffs_lock); +EXPORT_SYMBOL_GPL(ffs_lock); static struct ffs_dev *_ffs_find_dev(const char *name); static struct ffs_dev *_ffs_alloc_dev(void); @@ -2876,7 +2876,7 @@ int ffs_name_dev(struct ffs_dev *dev, const char *name) return ret; } -EXPORT_SYMBOL(ffs_name_dev); +EXPORT_SYMBOL_GPL(ffs_name_dev); int ffs_single_dev(struct ffs_dev *dev) { @@ -2893,7 +2893,7 @@ int ffs_single_dev(struct ffs_dev *dev) ffs_dev_unlock(); return ret; } -EXPORT_SYMBOL(ffs_single_dev); +EXPORT_SYMBOL_GPL(ffs_single_dev); /* * ffs_lock must be taken by the caller of this function diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index c11761ce5113..139bc9c6f7e0 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -834,7 +834,7 @@ void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net) opts->borrowed_net = opts->bound = true; opts->net = net; } -EXPORT_SYMBOL(rndis_borrow_net); +EXPORT_SYMBOL_GPL(rndis_borrow_net); static inline struct f_rndis_opts *to_f_rndis_opts(struct config_item *item) { diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index d822d822efb3..4c36694a0132 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -760,7 +760,7 @@ int rndis_signal_connect(int configNr) return rndis_indicate_status_msg(configNr, RNDIS_STATUS_MEDIA_CONNECT); } -EXPORT_SYMBOL(rndis_signal_connect); +EXPORT_SYMBOL_GPL(rndis_signal_connect); int rndis_signal_disconnect(int configNr) { @@ -769,7 +769,7 @@ int rndis_signal_disconnect(int configNr) return rndis_indicate_status_msg(configNr, RNDIS_STATUS_MEDIA_DISCONNECT); } -EXPORT_SYMBOL(rndis_signal_disconnect); +EXPORT_SYMBOL_GPL(rndis_signal_disconnect); void rndis_uninit(int configNr) { @@ -784,13 +784,13 @@ void rndis_uninit(int configNr) while ((buf = rndis_get_next_response(configNr, &length))) rndis_free_response(configNr, buf); } -EXPORT_SYMBOL(rndis_uninit); +EXPORT_SYMBOL_GPL(rndis_uninit); void rndis_set_host_mac(int configNr, const u8 *addr) { rndis_per_dev_params[configNr].host_mac = addr; } -EXPORT_SYMBOL(rndis_set_host_mac); +EXPORT_SYMBOL_GPL(rndis_set_host_mac); /* * Message Parser @@ -873,7 +873,7 @@ int rndis_msg_parser(u8 configNr, u8 *buf) return -ENOTSUPP; } -EXPORT_SYMBOL(rndis_msg_parser); +EXPORT_SYMBOL_GPL(rndis_msg_parser); int rndis_register(void (*resp_avail)(void *v), void *v) { @@ -895,7 +895,7 @@ int rndis_register(void (*resp_avail)(void *v), void *v) return -ENODEV; } -EXPORT_SYMBOL(rndis_register); +EXPORT_SYMBOL_GPL(rndis_register); void rndis_deregister(int configNr) { @@ -904,7 +904,7 @@ void rndis_deregister(int configNr) if (configNr >= RNDIS_MAX_CONFIGS) return; rndis_per_dev_params[configNr].used = 0; } -EXPORT_SYMBOL(rndis_deregister); +EXPORT_SYMBOL_GPL(rndis_deregister); int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) { @@ -918,7 +918,7 @@ int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) return 0; } -EXPORT_SYMBOL(rndis_set_param_dev); +EXPORT_SYMBOL_GPL(rndis_set_param_dev); int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) { @@ -931,7 +931,7 @@ int rndis_set_param_vendor(u8 configNr, u32 vendorID, const char *vendorDescr) return 0; } -EXPORT_SYMBOL(rndis_set_param_vendor); +EXPORT_SYMBOL_GPL(rndis_set_param_vendor); int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) { @@ -943,7 +943,7 @@ int rndis_set_param_medium(u8 configNr, u32 medium, u32 speed) return 0; } -EXPORT_SYMBOL(rndis_set_param_medium); +EXPORT_SYMBOL_GPL(rndis_set_param_medium); void rndis_add_hdr(struct sk_buff *skb) { @@ -958,7 +958,7 @@ void rndis_add_hdr(struct sk_buff *skb) header->DataOffset = cpu_to_le32(36); header->DataLength = cpu_to_le32(skb->len - sizeof(*header)); } -EXPORT_SYMBOL(rndis_add_hdr); +EXPORT_SYMBOL_GPL(rndis_add_hdr); void rndis_free_response(int configNr, u8 *buf) { @@ -975,7 +975,7 @@ void rndis_free_response(int configNr, u8 *buf) } } } -EXPORT_SYMBOL(rndis_free_response); +EXPORT_SYMBOL_GPL(rndis_free_response); u8 *rndis_get_next_response(int configNr, u32 *length) { @@ -997,7 +997,7 @@ u8 *rndis_get_next_response(int configNr, u32 *length) return NULL; } -EXPORT_SYMBOL(rndis_get_next_response); +EXPORT_SYMBOL_GPL(rndis_get_next_response); static rndis_resp_t *rndis_add_response(int configNr, u32 length) { @@ -1041,7 +1041,7 @@ int rndis_rm_hdr(struct gether *port, skb_queue_tail(list, skb); return 0; } -EXPORT_SYMBOL(rndis_rm_hdr); +EXPORT_SYMBOL_GPL(rndis_rm_hdr); #ifdef CONFIG_USB_GADGET_DEBUG_FILES diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index ec20a1f50c2d..ff205a7bc55c 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -43,7 +43,7 @@ struct usb_interface_descriptor fsg_intf_desc = { .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ .iInterface = FSG_STRING_INTERFACE, }; -EXPORT_SYMBOL(fsg_intf_desc); +EXPORT_SYMBOL_GPL(fsg_intf_desc); /* * Three full-speed endpoint descriptors: bulk-in, bulk-out, and @@ -58,7 +58,7 @@ struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, /* wMaxPacketSize set by autoconfiguration */ }; -EXPORT_SYMBOL(fsg_fs_bulk_in_desc); +EXPORT_SYMBOL_GPL(fsg_fs_bulk_in_desc); struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -68,7 +68,7 @@ struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, /* wMaxPacketSize set by autoconfiguration */ }; -EXPORT_SYMBOL(fsg_fs_bulk_out_desc); +EXPORT_SYMBOL_GPL(fsg_fs_bulk_out_desc); struct usb_descriptor_header *fsg_fs_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, @@ -76,7 +76,7 @@ struct usb_descriptor_header *fsg_fs_function[] = { (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, NULL, }; -EXPORT_SYMBOL(fsg_fs_function); +EXPORT_SYMBOL_GPL(fsg_fs_function); /* @@ -95,7 +95,7 @@ struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; -EXPORT_SYMBOL(fsg_hs_bulk_in_desc); +EXPORT_SYMBOL_GPL(fsg_hs_bulk_in_desc); struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -106,7 +106,7 @@ struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = { .wMaxPacketSize = cpu_to_le16(512), .bInterval = 1, /* NAK every 1 uframe */ }; -EXPORT_SYMBOL(fsg_hs_bulk_out_desc); +EXPORT_SYMBOL_GPL(fsg_hs_bulk_out_desc); struct usb_descriptor_header *fsg_hs_function[] = { @@ -115,7 +115,7 @@ struct usb_descriptor_header *fsg_hs_function[] = { (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, NULL, }; -EXPORT_SYMBOL(fsg_hs_function); +EXPORT_SYMBOL_GPL(fsg_hs_function); struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -125,7 +125,7 @@ struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; -EXPORT_SYMBOL(fsg_ss_bulk_in_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_desc); struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { .bLength = sizeof(fsg_ss_bulk_in_comp_desc), @@ -133,7 +133,7 @@ struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { /*.bMaxBurst = DYNAMIC, */ }; -EXPORT_SYMBOL(fsg_ss_bulk_in_comp_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_comp_desc); struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -143,7 +143,7 @@ struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; -EXPORT_SYMBOL(fsg_ss_bulk_out_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_desc); struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { .bLength = sizeof(fsg_ss_bulk_in_comp_desc), @@ -151,7 +151,7 @@ struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { /*.bMaxBurst = DYNAMIC, */ }; -EXPORT_SYMBOL(fsg_ss_bulk_out_comp_desc); +EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_comp_desc); struct usb_descriptor_header *fsg_ss_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, @@ -161,7 +161,7 @@ struct usb_descriptor_header *fsg_ss_function[] = { (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, NULL, }; -EXPORT_SYMBOL(fsg_ss_function); +EXPORT_SYMBOL_GPL(fsg_ss_function); /*-------------------------------------------------------------------------*/ @@ -179,7 +179,7 @@ void fsg_lun_close(struct fsg_lun *curlun) curlun->filp = NULL; } } -EXPORT_SYMBOL(fsg_lun_close); +EXPORT_SYMBOL_GPL(fsg_lun_close); int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { @@ -278,7 +278,7 @@ out: fput(filp); return rc; } -EXPORT_SYMBOL(fsg_lun_open); +EXPORT_SYMBOL_GPL(fsg_lun_open); /*-------------------------------------------------------------------------*/ @@ -295,7 +295,7 @@ int fsg_lun_fsync_sub(struct fsg_lun *curlun) return 0; return vfs_fsync(filp, 1); } -EXPORT_SYMBOL(fsg_lun_fsync_sub); +EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub); void store_cdrom_address(u8 *dest, int msf, u32 addr) { @@ -314,7 +314,7 @@ void store_cdrom_address(u8 *dest, int msf, u32 addr) put_unaligned_be32(addr, dest); } } -EXPORT_SYMBOL(store_cdrom_address); +EXPORT_SYMBOL_GPL(store_cdrom_address); /*-------------------------------------------------------------------------*/ @@ -325,13 +325,13 @@ ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf) ? curlun->ro : curlun->initially_ro); } -EXPORT_SYMBOL(fsg_show_ro); +EXPORT_SYMBOL_GPL(fsg_show_ro); ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf) { return sprintf(buf, "%u\n", curlun->nofua); } -EXPORT_SYMBOL(fsg_show_nofua); +EXPORT_SYMBOL_GPL(fsg_show_nofua); ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, char *buf) @@ -357,19 +357,19 @@ ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, up_read(filesem); return rc; } -EXPORT_SYMBOL(fsg_show_file); +EXPORT_SYMBOL_GPL(fsg_show_file); ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf) { return sprintf(buf, "%u\n", curlun->cdrom); } -EXPORT_SYMBOL(fsg_show_cdrom); +EXPORT_SYMBOL_GPL(fsg_show_cdrom); ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf) { return sprintf(buf, "%u\n", curlun->removable); } -EXPORT_SYMBOL(fsg_show_removable); +EXPORT_SYMBOL_GPL(fsg_show_removable); /* * The caller must hold fsg->filesem for reading when calling this function. @@ -410,7 +410,7 @@ ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, return rc; } -EXPORT_SYMBOL(fsg_store_ro); +EXPORT_SYMBOL_GPL(fsg_store_ro); ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count) { @@ -429,7 +429,7 @@ ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count) return count; } -EXPORT_SYMBOL(fsg_store_nofua); +EXPORT_SYMBOL_GPL(fsg_store_nofua); ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, const char *buf, size_t count) @@ -460,7 +460,7 @@ ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, up_write(filesem); return (rc < 0 ? rc : count); } -EXPORT_SYMBOL(fsg_store_file); +EXPORT_SYMBOL_GPL(fsg_store_file); ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, const char *buf, size_t count) @@ -483,7 +483,7 @@ ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, return ret; } -EXPORT_SYMBOL(fsg_store_cdrom); +EXPORT_SYMBOL_GPL(fsg_store_cdrom); ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, size_t count) @@ -499,6 +499,6 @@ ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, return count; } -EXPORT_SYMBOL(fsg_store_removable); +EXPORT_SYMBOL_GPL(fsg_store_removable); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 50d09c289137..216bbd1c871e 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -841,7 +841,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, return dev; } -EXPORT_SYMBOL(gether_setup_name); +EXPORT_SYMBOL_GPL(gether_setup_name); struct net_device *gether_setup_name_default(const char *netname) { @@ -879,7 +879,7 @@ struct net_device *gether_setup_name_default(const char *netname) return net; } -EXPORT_SYMBOL(gether_setup_name_default); +EXPORT_SYMBOL_GPL(gether_setup_name_default); int gether_register_netdev(struct net_device *net) { @@ -917,7 +917,7 @@ int gether_register_netdev(struct net_device *net) return status; } -EXPORT_SYMBOL(gether_register_netdev); +EXPORT_SYMBOL_GPL(gether_register_netdev); void gether_set_gadget(struct net_device *net, struct usb_gadget *g) { @@ -927,7 +927,7 @@ void gether_set_gadget(struct net_device *net, struct usb_gadget *g) dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); } -EXPORT_SYMBOL(gether_set_gadget); +EXPORT_SYMBOL_GPL(gether_set_gadget); int gether_set_dev_addr(struct net_device *net, const char *dev_addr) { @@ -940,7 +940,7 @@ int gether_set_dev_addr(struct net_device *net, const char *dev_addr) memcpy(dev->dev_mac, new_addr, ETH_ALEN); return 0; } -EXPORT_SYMBOL(gether_set_dev_addr); +EXPORT_SYMBOL_GPL(gether_set_dev_addr); int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len) { @@ -949,7 +949,7 @@ int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len) dev = netdev_priv(net); return get_ether_addr_str(dev->dev_mac, dev_addr, len); } -EXPORT_SYMBOL(gether_get_dev_addr); +EXPORT_SYMBOL_GPL(gether_get_dev_addr); int gether_set_host_addr(struct net_device *net, const char *host_addr) { @@ -962,7 +962,7 @@ int gether_set_host_addr(struct net_device *net, const char *host_addr) memcpy(dev->host_mac, new_addr, ETH_ALEN); return 0; } -EXPORT_SYMBOL(gether_set_host_addr); +EXPORT_SYMBOL_GPL(gether_set_host_addr); int gether_get_host_addr(struct net_device *net, char *host_addr, int len) { @@ -971,7 +971,7 @@ int gether_get_host_addr(struct net_device *net, char *host_addr, int len) dev = netdev_priv(net); return get_ether_addr_str(dev->host_mac, host_addr, len); } -EXPORT_SYMBOL(gether_get_host_addr); +EXPORT_SYMBOL_GPL(gether_get_host_addr); int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) { @@ -985,7 +985,7 @@ int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) return strlen(host_addr); } -EXPORT_SYMBOL(gether_get_host_addr_cdc); +EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc); void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]) { @@ -994,7 +994,7 @@ void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]) dev = netdev_priv(net); memcpy(host_mac, dev->host_mac, ETH_ALEN); } -EXPORT_SYMBOL(gether_get_host_addr_u8); +EXPORT_SYMBOL_GPL(gether_get_host_addr_u8); void gether_set_qmult(struct net_device *net, unsigned qmult) { @@ -1003,7 +1003,7 @@ void gether_set_qmult(struct net_device *net, unsigned qmult) dev = netdev_priv(net); dev->qmult = qmult; } -EXPORT_SYMBOL(gether_set_qmult); +EXPORT_SYMBOL_GPL(gether_set_qmult); unsigned gether_get_qmult(struct net_device *net) { @@ -1012,7 +1012,7 @@ unsigned gether_get_qmult(struct net_device *net) dev = netdev_priv(net); return dev->qmult; } -EXPORT_SYMBOL(gether_get_qmult); +EXPORT_SYMBOL_GPL(gether_get_qmult); int gether_get_ifname(struct net_device *net, char *name, int len) { @@ -1021,7 +1021,7 @@ int gether_get_ifname(struct net_device *net, char *name, int len) rtnl_unlock(); return strlen(name); } -EXPORT_SYMBOL(gether_get_ifname); +EXPORT_SYMBOL_GPL(gether_get_ifname); /** * gether_cleanup - remove Ethernet-over-USB device @@ -1038,7 +1038,7 @@ void gether_cleanup(struct eth_dev *dev) flush_work(&dev->work); free_netdev(dev->net); } -EXPORT_SYMBOL(gether_cleanup); +EXPORT_SYMBOL_GPL(gether_cleanup); /** * gether_connect - notify network layer that USB link is active @@ -1119,7 +1119,7 @@ fail0: return ERR_PTR(result); return dev->net; } -EXPORT_SYMBOL(gether_connect); +EXPORT_SYMBOL_GPL(gether_connect); /** * gether_disconnect - notify network layer that USB link is inactive @@ -1197,7 +1197,7 @@ void gether_disconnect(struct gether *link) dev->port_usb = NULL; spin_unlock(&dev->lock); } -EXPORT_SYMBOL(gether_disconnect); +EXPORT_SYMBOL_GPL(gether_disconnect); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Brownell"); diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c index 63b6642c162b..c6276f0268ae 100644 --- a/drivers/usb/gadget/u_f.c +++ b/drivers/usb/gadget/u_f.c @@ -29,4 +29,4 @@ struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len) } return req; } -EXPORT_SYMBOL(alloc_ep_req); +EXPORT_SYMBOL_GPL(alloc_ep_req); diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index bb394980532b..95e70bc384c2 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -54,14 +54,14 @@ void usb_nop_xceiv_register(void) return; } } -EXPORT_SYMBOL(usb_nop_xceiv_register); +EXPORT_SYMBOL_GPL(usb_nop_xceiv_register); void usb_nop_xceiv_unregister(void) { platform_device_unregister(pd); pd = NULL; } -EXPORT_SYMBOL(usb_nop_xceiv_unregister); +EXPORT_SYMBOL_GPL(usb_nop_xceiv_unregister); static int nop_set_suspend(struct usb_phy *x, int suspend) { From 4525beeb9aadbb9e1cb3e9e135f4371553f26a70 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 15:20:44 -0500 Subject: [PATCH 006/314] usb: phy: rename usb_nop_xceiv to usb_phy_generic no functional changes, just renaming the function in order to make it slightly clearer what it should be used for, also matching the driver name. Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/usb-host.c | 8 ++--- drivers/usb/dwc3/dwc3-exynos.c | 6 ++-- drivers/usb/dwc3/dwc3-pci.c | 6 ++-- drivers/usb/musb/am35x.c | 4 +-- drivers/usb/musb/blackfin.c | 4 +-- drivers/usb/musb/da8xx.c | 4 +-- drivers/usb/musb/davinci.c | 6 ++-- drivers/usb/musb/tusb6010.c | 6 ++-- drivers/usb/phy/phy-am335x.c | 2 +- drivers/usb/phy/phy-generic.c | 50 +++++++++++++-------------- drivers/usb/phy/phy-generic.h | 6 ++-- drivers/usb/phy/phy-keystone.c | 2 +- include/linux/usb/usb_phy_gen_xceiv.h | 10 +++--- 13 files changed, 57 insertions(+), 57 deletions(-) diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 10855eb4ccc1..ab983cdd3edf 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = { /* .init_data filled later */ }; -static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */ +static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */ static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ /** @@ -435,7 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) struct platform_device *pdev; char *phy_id; struct platform_device_info pdevinfo; - struct usb_phy_gen_xceiv_platform_data nop_pdata; + struct usb_phy_generic_platform_data nop_pdata; for (i = 0; i < num_phys; i++) { @@ -469,8 +469,8 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) pdevinfo.id = phy->port; pdevinfo.data = &nop_pdata; pdevinfo.size_data = - sizeof(struct usb_phy_gen_xceiv_platform_data); - scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", + sizeof(struct usb_phy_generic_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d", phy->port); pdev = platform_device_register_full(&pdevinfo); if (IS_ERR(pdev)) { diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 28c8ad79f5e6..821cc59e6e1d 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -38,13 +38,13 @@ struct dwc3_exynos { static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) { - struct usb_phy_gen_xceiv_platform_data pdata; + struct usb_phy_generic_platform_data pdata; struct platform_device *pdev; int ret; memset(&pdata, 0x00, sizeof(pdata)); - pdev = platform_device_alloc("usb_phy_gen_xceiv", PLATFORM_DEVID_AUTO); + pdev = platform_device_alloc("usb_phy_generic", PLATFORM_DEVID_AUTO); if (!pdev) return -ENOMEM; @@ -56,7 +56,7 @@ static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) if (ret) goto err1; - pdev = platform_device_alloc("usb_phy_gen_xceiv", PLATFORM_DEVID_AUTO); + pdev = platform_device_alloc("usb_phy_generic", PLATFORM_DEVID_AUTO); if (!pdev) { ret = -ENOMEM; goto err1; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index f393c183cc69..8b162f0e293c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -40,13 +40,13 @@ struct dwc3_pci { static int dwc3_pci_register_phys(struct dwc3_pci *glue) { - struct usb_phy_gen_xceiv_platform_data pdata; + struct usb_phy_generic_platform_data pdata; struct platform_device *pdev; int ret; memset(&pdata, 0x00, sizeof(pdata)); - pdev = platform_device_alloc("usb_phy_gen_xceiv", 0); + pdev = platform_device_alloc("usb_phy_generic", 0); if (!pdev) return -ENOMEM; @@ -58,7 +58,7 @@ static int dwc3_pci_register_phys(struct dwc3_pci *glue) if (ret) goto err1; - pdev = platform_device_alloc("usb_phy_gen_xceiv", 1); + pdev = platform_device_alloc("usb_phy_generic", 1); if (!pdev) { ret = -ENOMEM; goto err1; diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index b3aa0184af9a..77ed66427969 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -360,7 +360,7 @@ static int am35x_musb_init(struct musb *musb) if (!rev) return -ENODEV; - usb_nop_xceiv_register(); + usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) return -EPROBE_DEFER; @@ -402,7 +402,7 @@ static int am35x_musb_exit(struct musb *musb) data->set_phy_power(0); usb_put_phy(musb->xceiv); - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); return 0; } diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 796677fa9a15..607f3ae04591 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -401,7 +401,7 @@ static int bfin_musb_init(struct musb *musb) } gpio_direction_output(musb->config->gpio_vrsel, 0); - usb_nop_xceiv_register(); + usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { gpio_free(musb->config->gpio_vrsel); @@ -426,7 +426,7 @@ static int bfin_musb_exit(struct musb *musb) gpio_free(musb->config->gpio_vrsel); usb_put_phy(musb->xceiv); - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); return 0; } diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index e3486de71995..bcdce8e64670 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -418,7 +418,7 @@ static int da8xx_musb_init(struct musb *musb) if (!rev) goto fail; - usb_nop_xceiv_register(); + usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { ret = -EPROBE_DEFER; @@ -453,7 +453,7 @@ static int da8xx_musb_exit(struct musb *musb) phy_off(); usb_put_phy(musb->xceiv); - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); return 0; } diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index c259dac9d056..c0e07eddb079 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -381,7 +381,7 @@ static int davinci_musb_init(struct musb *musb) u32 revision; int ret = -ENODEV; - usb_nop_xceiv_register(); + usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { ret = -EPROBE_DEFER; @@ -439,7 +439,7 @@ static int davinci_musb_init(struct musb *musb) fail: usb_put_phy(musb->xceiv); unregister: - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); return ret; } @@ -487,7 +487,7 @@ static int davinci_musb_exit(struct musb *musb) phy_off(); usb_put_phy(musb->xceiv); - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); return 0; } diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 4e9fb1d08698..0c0f5ee1e3f1 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1065,7 +1065,7 @@ static int tusb_musb_init(struct musb *musb) void __iomem *sync = NULL; int ret; - usb_nop_xceiv_register(); + usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) return -EPROBE_DEFER; @@ -1117,7 +1117,7 @@ done: iounmap(sync); usb_put_phy(musb->xceiv); - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); } return ret; } @@ -1133,7 +1133,7 @@ static int tusb_musb_exit(struct musb *musb) iounmap(musb->sync_va); usb_put_phy(musb->xceiv); - usb_nop_xceiv_unregister(); + usb_phy_generic_unregister(); return 0; } diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index 12fc3468a01e..bb866e466051 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -13,7 +13,7 @@ #include "phy-generic.h" struct am335x_phy { - struct usb_phy_gen_xceiv usb_phy_gen; + struct usb_phy_generic usb_phy_gen; struct phy_control *phy_ctrl; int id; }; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 95e70bc384c2..e76ca4ca3a8a 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -43,32 +43,32 @@ static struct platform_device *pd; -void usb_nop_xceiv_register(void) +void usb_phy_generic_register(void) { if (pd) return; - pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0); + pd = platform_device_register_simple("usb_phy_generic", -1, NULL, 0); if (IS_ERR(pd)) { pr_err("Unable to register generic usb transceiver\n"); pd = NULL; return; } } -EXPORT_SYMBOL_GPL(usb_nop_xceiv_register); +EXPORT_SYMBOL_GPL(usb_phy_generic_register); -void usb_nop_xceiv_unregister(void) +void usb_phy_generic_unregister(void) { platform_device_unregister(pd); pd = NULL; } -EXPORT_SYMBOL_GPL(usb_nop_xceiv_unregister); +EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); static int nop_set_suspend(struct usb_phy *x, int suspend) { return 0; } -static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted) +static void nop_reset_set(struct usb_phy_generic *nop, int asserted) { int value; @@ -87,7 +87,7 @@ static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted) int usb_gen_phy_init(struct usb_phy *phy) { - struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev); + struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); if (!IS_ERR(nop->vcc)) { if (regulator_enable(nop->vcc)) @@ -106,7 +106,7 @@ EXPORT_SYMBOL_GPL(usb_gen_phy_init); void usb_gen_phy_shutdown(struct usb_phy *phy) { - struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev); + struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); /* Assert RESET */ nop_reset_set(nop, 1); @@ -150,8 +150,8 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) return 0; } -int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - struct usb_phy_gen_xceiv_platform_data *pdata) +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, + struct usb_phy_generic_platform_data *pdata) { enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; @@ -245,10 +245,10 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, } EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); -static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) +static int usb_phy_generic_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct usb_phy_gen_xceiv *nop; + struct usb_phy_generic *nop; int err; nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); @@ -274,9 +274,9 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) return 0; } -static int usb_phy_gen_xceiv_remove(struct platform_device *pdev) +static int usb_phy_generic_remove(struct platform_device *pdev) { - struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev); + struct usb_phy_generic *nop = platform_get_drvdata(pdev); usb_remove_phy(&nop->phy); @@ -290,29 +290,29 @@ static const struct of_device_id nop_xceiv_dt_ids[] = { MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); -static struct platform_driver usb_phy_gen_xceiv_driver = { - .probe = usb_phy_gen_xceiv_probe, - .remove = usb_phy_gen_xceiv_remove, +static struct platform_driver usb_phy_generic_driver = { + .probe = usb_phy_generic_probe, + .remove = usb_phy_generic_remove, .driver = { - .name = "usb_phy_gen_xceiv", + .name = "usb_phy_generic", .owner = THIS_MODULE, .of_match_table = nop_xceiv_dt_ids, }, }; -static int __init usb_phy_gen_xceiv_init(void) +static int __init usb_phy_generic_init(void) { - return platform_driver_register(&usb_phy_gen_xceiv_driver); + return platform_driver_register(&usb_phy_generic_driver); } -subsys_initcall(usb_phy_gen_xceiv_init); +subsys_initcall(usb_phy_generic_init); -static void __exit usb_phy_gen_xceiv_exit(void) +static void __exit usb_phy_generic_exit(void) { - platform_driver_unregister(&usb_phy_gen_xceiv_driver); + platform_driver_unregister(&usb_phy_generic_driver); } -module_exit(usb_phy_gen_xceiv_exit); +module_exit(usb_phy_generic_exit); -MODULE_ALIAS("platform:usb_phy_gen_xceiv"); +MODULE_ALIAS("platform:usb_phy_generic"); MODULE_AUTHOR("Texas Instruments Inc"); MODULE_DESCRIPTION("NOP USB Transceiver driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index 38a81f307b82..f32450ada12d 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -3,7 +3,7 @@ #include -struct usb_phy_gen_xceiv { +struct usb_phy_generic { struct usb_phy phy; struct device *dev; struct clk *clk; @@ -15,7 +15,7 @@ struct usb_phy_gen_xceiv { int usb_gen_phy_init(struct usb_phy *phy); void usb_gen_phy_shutdown(struct usb_phy *phy); -int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - struct usb_phy_gen_xceiv_platform_data *pdata); +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, + struct usb_phy_generic_platform_data *pdata); #endif diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c index d762003896c0..2404c442c302 100644 --- a/drivers/usb/phy/phy-keystone.c +++ b/drivers/usb/phy/phy-keystone.c @@ -35,7 +35,7 @@ #define PHY_REF_SSP_EN BIT(29) struct keystone_usbphy { - struct usb_phy_gen_xceiv usb_phy_gen; + struct usb_phy_generic usb_phy_gen; void __iomem *phy_ctrl; }; diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h index cc8d818a83be..c00176d48625 100644 --- a/include/linux/usb/usb_phy_gen_xceiv.h +++ b/include/linux/usb/usb_phy_gen_xceiv.h @@ -3,7 +3,7 @@ #include -struct usb_phy_gen_xceiv_platform_data { +struct usb_phy_generic_platform_data { enum usb_phy_type type; unsigned long clk_rate; @@ -15,14 +15,14 @@ struct usb_phy_gen_xceiv_platform_data { #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ -extern void usb_nop_xceiv_register(void); -extern void usb_nop_xceiv_unregister(void); +extern void usb_phy_generic_register(void); +extern void usb_phy_generic_unregister(void); #else -static inline void usb_nop_xceiv_register(void) +static inline void usb_phy_generic_register(void) { } -static inline void usb_nop_xceiv_unregister(void) +static inline void usb_phy_generic_unregister(void) { } #endif From d7078df6be6e9e5e3ac354859f5b8d60114391b4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 15:28:32 -0500 Subject: [PATCH 007/314] usb: phy: rename to now that all functions match the driver name, the only missing piece is to rename the header file itself. Signed-off-by: Felipe Balbi --- arch/arm/mach-omap2/board-omap3beagle.c | 1 - arch/arm/mach-omap2/usb-host.c | 2 +- drivers/usb/dwc3/dwc3-exynos.c | 2 +- drivers/usb/dwc3/dwc3-pci.c | 2 +- drivers/usb/musb/am35x.c | 2 +- drivers/usb/musb/blackfin.c | 2 +- drivers/usb/musb/da8xx.c | 2 +- drivers/usb/musb/davinci.c | 2 +- drivers/usb/musb/musb_dsps.c | 2 +- drivers/usb/musb/tusb6010.c | 2 +- drivers/usb/phy/phy-am335x.c | 2 +- drivers/usb/phy/phy-generic.c | 2 +- drivers/usb/phy/phy-generic.h | 2 +- drivers/usb/phy/phy-keystone.c | 2 +- include/linux/usb/{usb_phy_gen_xceiv.h => usb_phy_generic.h} | 0 15 files changed, 13 insertions(+), 14 deletions(-) rename include/linux/usb/{usb_phy_gen_xceiv.h => usb_phy_generic.h} (100%) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index d6ed819ff15c..660bfc5a70d7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index ab983cdd3edf..745367c0c2bb 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include "soc.h" #include "omap_device.h" diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 821cc59e6e1d..ed22d722884e 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 8b162f0e293c..1ed95e0386eb 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -23,7 +23,7 @@ #include #include -#include +#include /* FIXME define these in */ #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 77ed66427969..044cd824c70d 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include #include "musb_core.h" diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 607f3ae04591..c9992a2eaaa8 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index bcdce8e64670..a0dabb05de76 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index c0e07eddb079..737035457858 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 3372ded5def7..18882924d9d5 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 0c0f5ee1e3f1..8d4a8194c8f2 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include "musb_core.h" diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index bb866e466051..585e50cb1980 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -2,7 +2,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index e76ca4ca3a8a..2c49cd8f6d25 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index f32450ada12d..d8feacc0b7fb 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -1,7 +1,7 @@ #ifndef _PHY_GENERIC_H_ #define _PHY_GENERIC_H_ -#include +#include struct usb_phy_generic { struct usb_phy phy; diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c index 2404c442c302..f4d722de912b 100644 --- a/drivers/usb/phy/phy-keystone.c +++ b/drivers/usb/phy/phy-keystone.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include #include diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_generic.h similarity index 100% rename from include/linux/usb/usb_phy_gen_xceiv.h rename to include/linux/usb/usb_phy_generic.h From e741e637a85a802a93125dca1ecf324bc414101b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 16:05:17 -0500 Subject: [PATCH 008/314] usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove() This patch is in preparation to supporting calling those functions multiple times. Signed-off-by: Felipe Balbi --- drivers/usb/musb/am35x.c | 4 ++-- drivers/usb/musb/blackfin.c | 6 +++--- drivers/usb/musb/da8xx.c | 4 ++-- drivers/usb/musb/davinci.c | 4 ++-- drivers/usb/musb/tusb6010.c | 5 ++--- 5 files changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 044cd824c70d..05459b56b2a8 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -360,7 +360,6 @@ static int am35x_musb_init(struct musb *musb) if (!rev) return -ENODEV; - usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) return -EPROBE_DEFER; @@ -402,7 +401,6 @@ static int am35x_musb_exit(struct musb *musb) data->set_phy_power(0); usb_put_phy(musb->xceiv); - usb_phy_generic_unregister(); return 0; } @@ -505,6 +503,7 @@ static int am35x_probe(struct platform_device *pdev) pdata->platform_ops = &am35x_ops; + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); pinfo = am35x_dev_info; @@ -547,6 +546,7 @@ static int am35x_remove(struct platform_device *pdev) struct am35x_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); + usb_phy_generic_unregister(); clk_disable(glue->clk); clk_disable(glue->phy_clk); clk_put(glue->clk); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index c9992a2eaaa8..53acffe9a858 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -401,7 +401,6 @@ static int bfin_musb_init(struct musb *musb) } gpio_direction_output(musb->config->gpio_vrsel, 0); - usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { gpio_free(musb->config->gpio_vrsel); @@ -424,9 +423,8 @@ static int bfin_musb_init(struct musb *musb) static int bfin_musb_exit(struct musb *musb) { gpio_free(musb->config->gpio_vrsel); - usb_put_phy(musb->xceiv); - usb_phy_generic_unregister(); + return 0; } @@ -477,6 +475,7 @@ static int bfin_probe(struct platform_device *pdev) pdata->platform_ops = &bfin_ops; + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * @@ -528,6 +527,7 @@ static int bfin_remove(struct platform_device *pdev) struct bfin_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); + usb_phy_generic_unregister(); kfree(glue); return 0; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index a0dabb05de76..024751f9b31d 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -418,7 +418,6 @@ static int da8xx_musb_init(struct musb *musb) if (!rev) goto fail; - usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { ret = -EPROBE_DEFER; @@ -453,7 +452,6 @@ static int da8xx_musb_exit(struct musb *musb) phy_off(); usb_put_phy(musb->xceiv); - usb_phy_generic_unregister(); return 0; } @@ -512,6 +510,7 @@ static int da8xx_probe(struct platform_device *pdev) pdata->platform_ops = &da8xx_ops; + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * @@ -561,6 +560,7 @@ static int da8xx_remove(struct platform_device *pdev) struct da8xx_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); + usb_phy_generic_unregister(); clk_disable(glue->clk); clk_put(glue->clk); kfree(glue); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 737035457858..de8492b06e46 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -381,7 +381,6 @@ static int davinci_musb_init(struct musb *musb) u32 revision; int ret = -ENODEV; - usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { ret = -EPROBE_DEFER; @@ -487,7 +486,6 @@ static int davinci_musb_exit(struct musb *musb) phy_off(); usb_put_phy(musb->xceiv); - usb_phy_generic_unregister(); return 0; } @@ -545,6 +543,7 @@ static int davinci_probe(struct platform_device *pdev) pdata->platform_ops = &davinci_ops; + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * @@ -603,6 +602,7 @@ static int davinci_remove(struct platform_device *pdev) struct davinci_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); + usb_phy_generic_unregister(); clk_disable(glue->clk); clk_put(glue->clk); kfree(glue); diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 8d4a8194c8f2..e1da199c6f21 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1065,7 +1065,6 @@ static int tusb_musb_init(struct musb *musb) void __iomem *sync = NULL; int ret; - usb_phy_generic_register(); musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) return -EPROBE_DEFER; @@ -1117,7 +1116,6 @@ done: iounmap(sync); usb_put_phy(musb->xceiv); - usb_phy_generic_unregister(); } return ret; } @@ -1133,7 +1131,6 @@ static int tusb_musb_exit(struct musb *musb) iounmap(musb->sync_va); usb_put_phy(musb->xceiv); - usb_phy_generic_unregister(); return 0; } @@ -1176,6 +1173,7 @@ static int tusb_probe(struct platform_device *pdev) pdata->platform_ops = &tusb_ops; + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * @@ -1224,6 +1222,7 @@ static int tusb_remove(struct platform_device *pdev) struct tusb6010_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); + usb_phy_generic_unregister(); kfree(glue); return 0; From 2f36ff6915c6c00df8b9962d9c6c7992befcf8ce Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 16 Apr 2014 16:16:33 -0500 Subject: [PATCH 009/314] usb: phy: generic: allow multiples calls to usb_phy_generic_register() it's now very easy to return a platform_device pointer and have the caller pass it as argument when calling usb_phy_generic_unregister(). Signed-off-by: Felipe Balbi --- drivers/usb/musb/am35x.c | 12 +++++++++--- drivers/usb/musb/blackfin.c | 10 ++++++++-- drivers/usb/musb/da8xx.c | 14 +++++++++++--- drivers/usb/musb/tusb6010.c | 3 ++- drivers/usb/phy/phy-generic.c | 19 +++++-------------- include/linux/usb/usb_phy_generic.h | 9 +++++---- 6 files changed, 40 insertions(+), 27 deletions(-) diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 05459b56b2a8..0a34dd859555 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -85,6 +85,7 @@ struct am35x_glue { struct device *dev; struct platform_device *musb; + struct platform_device *phy; struct clk *phy_clk; struct clk *clk; }; @@ -503,7 +504,9 @@ static int am35x_probe(struct platform_device *pdev) pdata->platform_ops = &am35x_ops; - usb_phy_generic_register(); + glue->phy = usb_phy_generic_register(); + if (IS_ERR(glue->phy)) + goto err7; platform_set_drvdata(pdev, glue); pinfo = am35x_dev_info; @@ -517,11 +520,14 @@ static int am35x_probe(struct platform_device *pdev) if (IS_ERR(musb)) { ret = PTR_ERR(musb); dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); - goto err7; + goto err8; } return 0; +err8: + usb_phy_generic_unregister(glue->phy); + err7: clk_disable(clk); @@ -546,7 +552,7 @@ static int am35x_remove(struct platform_device *pdev) struct am35x_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); - usb_phy_generic_unregister(); + usb_phy_generic_unregister(glue->phy); clk_disable(glue->clk); clk_disable(glue->phy_clk); clk_put(glue->clk); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 53acffe9a858..d40d5f0b5528 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -29,6 +29,7 @@ struct bfin_glue { struct device *dev; struct platform_device *musb; + struct platform_device *phy; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -475,7 +476,9 @@ static int bfin_probe(struct platform_device *pdev) pdata->platform_ops = &bfin_ops; - usb_phy_generic_register(); + glue->phy = usb_phy_generic_register(); + if (IS_ERR(glue->phy)) + goto err2; platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * @@ -513,6 +516,9 @@ static int bfin_probe(struct platform_device *pdev) return 0; err3: + usb_phy_generic_unregister(glue->phy); + +err2: platform_device_put(musb); err1: @@ -527,7 +533,7 @@ static int bfin_remove(struct platform_device *pdev) struct bfin_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); - usb_phy_generic_unregister(); + usb_phy_generic_unregister(glue->phy); kfree(glue); return 0; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 024751f9b31d..058775e647ad 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -85,6 +85,7 @@ struct da8xx_glue { struct device *dev; struct platform_device *musb; + struct platform_device *phy; struct clk *clk; }; @@ -510,7 +511,11 @@ static int da8xx_probe(struct platform_device *pdev) pdata->platform_ops = &da8xx_ops; - usb_phy_generic_register(); + glue->phy = usb_phy_generic_register(); + if (IS_ERR(glue->phy)) { + ret = PTR_ERR(glue->phy); + goto err5; + } platform_set_drvdata(pdev, glue); memset(musb_resources, 0x00, sizeof(*musb_resources) * @@ -537,11 +542,14 @@ static int da8xx_probe(struct platform_device *pdev) if (IS_ERR(musb)) { ret = PTR_ERR(musb); dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); - goto err5; + goto err6; } return 0; +err6: + usb_phy_generic_unregister(glue->phy); + err5: clk_disable(clk); @@ -560,7 +568,7 @@ static int da8xx_remove(struct platform_device *pdev) struct da8xx_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); - usb_phy_generic_unregister(); + usb_phy_generic_unregister(glue->phy); clk_disable(glue->clk); clk_put(glue->clk); kfree(glue); diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index e1da199c6f21..f38a8dbd6075 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -31,6 +31,7 @@ struct tusb6010_glue { struct device *dev; struct platform_device *musb; + struct platform_device *phy; }; static void tusb_musb_set_vbus(struct musb *musb, int is_on); @@ -1222,7 +1223,7 @@ static int tusb_remove(struct platform_device *pdev) struct tusb6010_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); - usb_phy_generic_unregister(); + usb_phy_generic_unregister(glue->phy); kfree(glue); return 0; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 2c49cd8f6d25..7594e5069ae5 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -41,25 +41,16 @@ #include "phy-generic.h" -static struct platform_device *pd; - -void usb_phy_generic_register(void) +struct platform_device *usb_phy_generic_register(void) { - if (pd) - return; - pd = platform_device_register_simple("usb_phy_generic", -1, NULL, 0); - if (IS_ERR(pd)) { - pr_err("Unable to register generic usb transceiver\n"); - pd = NULL; - return; - } + return platform_device_register_simple("usb_phy_generic", + PLATFORM_DEVID_AUTO, NULL, 0); } EXPORT_SYMBOL_GPL(usb_phy_generic_register); -void usb_phy_generic_unregister(void) +void usb_phy_generic_unregister(struct platform_device *pdev) { - platform_device_unregister(pd); - pd = NULL; + platform_device_unregister(pdev); } EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h index c00176d48625..8346bcc50c2f 100644 --- a/include/linux/usb/usb_phy_generic.h +++ b/include/linux/usb/usb_phy_generic.h @@ -15,14 +15,15 @@ struct usb_phy_generic_platform_data { #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ -extern void usb_phy_generic_register(void); -extern void usb_phy_generic_unregister(void); +extern struct platform_device *usb_phy_generic_register(void); +extern void usb_phy_generic_unregister(struct platform_device *); #else -static inline void usb_phy_generic_register(void) +static inline struct platform_device *usb_phy_generic_register(void) { + return NULL; } -static inline void usb_phy_generic_unregister(void) +static inline void usb_phy_generic_unregister(struct platform_device *pdev) { } #endif From dca769bd5a76e9e634cc36987760306846153cac Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 21 Apr 2014 10:50:35 -0500 Subject: [PATCH 010/314] usb: phy: generic: switch over to IS_ENABLED() when checking if our generic PHY is enabled, it's a lot easier to use IS_ENABLED() instead of manually checking for it. While at that, also remove the bogus defined(MODULE) at the end of the line. Signed-off-by: Felipe Balbi --- include/linux/usb/usb_phy_generic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h index 8346bcc50c2f..68adae83affc 100644 --- a/include/linux/usb/usb_phy_generic.h +++ b/include/linux/usb/usb_phy_generic.h @@ -13,7 +13,7 @@ struct usb_phy_generic_platform_data { int gpio_reset; }; -#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) +#if IS_ENABLED(CONFIG_NOP_USB_XCEIV) /* sometimes transceivers are accessed only through e.g. ULPI */ extern struct platform_device *usb_phy_generic_register(void); extern void usb_phy_generic_unregister(struct platform_device *); From 22876266de43ec24ae93f635490c40edabaf8278 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Thu, 27 Mar 2014 16:15:53 +0100 Subject: [PATCH 011/314] usb: gadget: gr_udc: improve platform_device variable name Rename struct platform_device pointers from ofdev to pdev for clarity, while at that, also use platform_set/get_drvdata() helpers. Suggested-by: Mark Rutland Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index f984ee75324d..ae5bebe98b2d 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -2065,9 +2065,9 @@ static int gr_udc_init(struct gr_udc *dev) return 0; } -static int gr_remove(struct platform_device *ofdev) +static int gr_remove(struct platform_device *pdev) { - struct gr_udc *dev = dev_get_drvdata(&ofdev->dev); + struct gr_udc *dev = platform_get_drvdata(pdev); if (dev->added) usb_del_gadget_udc(&dev->gadget); /* Shuts everything down */ @@ -2077,7 +2077,7 @@ static int gr_remove(struct platform_device *ofdev) gr_dfs_delete(dev); if (dev->desc_pool) dma_pool_destroy(dev->desc_pool); - dev_set_drvdata(&ofdev->dev, NULL); + platform_set_drvdata(pdev, NULL); gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req); gr_free_request(&dev->epo[0].ep, &dev->ep0reqo->req); @@ -2090,7 +2090,7 @@ static int gr_request_irq(struct gr_udc *dev, int irq) IRQF_SHARED, driver_name, dev); } -static int gr_probe(struct platform_device *ofdev) +static int gr_probe(struct platform_device *pdev) { struct gr_udc *dev; struct resource *res; @@ -2098,12 +2098,12 @@ static int gr_probe(struct platform_device *ofdev) int retval; u32 status; - dev = devm_kzalloc(&ofdev->dev, sizeof(*dev), GFP_KERNEL); + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; - dev->dev = &ofdev->dev; + dev->dev = &pdev->dev; - res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(dev->dev, res); if (IS_ERR(regs)) return PTR_ERR(regs); @@ -2132,7 +2132,7 @@ static int gr_probe(struct platform_device *ofdev) spin_lock_init(&dev->lock); dev->regs = regs; - dev_set_drvdata(&ofdev->dev, dev); + platform_set_drvdata(pdev, dev); /* Determine number of endpoints and data interface mode */ status = gr_read32(&dev->regs->status); @@ -2204,7 +2204,7 @@ out: spin_unlock(&dev->lock); if (retval) - gr_remove(ofdev); + gr_remove(pdev); return retval; } From d9a6ef1bb27e589ec40f792f3e742c3f54cbdb28 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Thu, 27 Mar 2014 16:15:54 +0100 Subject: [PATCH 012/314] usb: gadget: gr_udc: Expand devicetree documentation Provide more information on the two different interrupt cases and more information of endpoint buffer sizes. Suggested by Mark Rutland. Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/gr-udc.txt | 20 ++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt index 0c5118f7a916..e9445224fabd 100644 --- a/Documentation/devicetree/bindings/usb/gr-udc.txt +++ b/Documentation/devicetree/bindings/usb/gr-udc.txt @@ -12,17 +12,23 @@ Required properties: - reg : Address and length of the register set for the device -- interrupts : Interrupt numbers for this device +- interrupts : Interrupt numbers for this device. Either one interrupt number + for all interrupts, or one for status related interrupts, one for IN + endpoint related interrupts and one for OUT endpoint related interrupts. Optional properties: -- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is - not present, or for endpoints outside of the array, 1024 is assumed by - the driver. +- epobufsizes : Array of buffer sizes for OUT endpoints when they differ + from the default size of 1024. The array is indexed by the OUT endpoint + number. If the property is present it typically contains one entry for + each OUT endpoint of the core. Fewer entries overrides the default sizes + only for as many endpoints as the array contains. -- epibufsizes : An array of buffer sizes for IN endpoints. If the property is - not present, or for endpoints outside of the array, 1024 is assumed by - the driver. +- epibufsizes : Array of buffer sizes for IN endpoints when they differ + from the default size of 1024. The array is indexed by the IN endpoint + number. If the property is present it typically contains one entry for + each IN endpoint of the core. Fewer entries overrides the default sizes + only for as many endpoints as the array contains. For further information look in the documentation for the GLIB IP core library: http://www.gaisler.com/products/grlib/grip.pdf From 196800da39a142e2952ad5e1cb58a84838956764 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Thu, 27 Mar 2014 16:15:55 +0100 Subject: [PATCH 013/314] usb: gadget: gr_udc: Use platform_get_irq instead of irq_of_parse_and_map Use platform_get_irq as no mapping needs to be done. No functional difference for SPARC which is the typical environment for the driver though. Suggested by Mark Rutland. Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index ae5bebe98b2d..7a992546335d 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -2108,20 +2108,22 @@ static int gr_probe(struct platform_device *pdev) if (IS_ERR(regs)) return PTR_ERR(regs); - dev->irq = irq_of_parse_and_map(dev->dev->of_node, 0); - if (!dev->irq) { + dev->irq = platform_get_irq(pdev, 0); + if (dev->irq <= 0) { dev_err(dev->dev, "No irq found\n"); return -ENODEV; } /* Some core configurations has separate irqs for IN and OUT events */ - dev->irqi = irq_of_parse_and_map(dev->dev->of_node, 1); - if (dev->irqi) { - dev->irqo = irq_of_parse_and_map(dev->dev->of_node, 2); - if (!dev->irqo) { + dev->irqi = platform_get_irq(pdev, 1); + if (dev->irqi > 0) { + dev->irqo = platform_get_irq(pdev, 2); + if (dev->irqo <= 0) { dev_err(dev->dev, "Found irqi but not irqo\n"); return -ENODEV; } + } else { + dev->irqi = 0; } dev->gadget.name = driver_name; From 73e1c093e83a421d24d54a94cb87031e7c222cd1 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Thu, 27 Mar 2014 16:15:56 +0100 Subject: [PATCH 014/314] usb: gadget: gr_udc: Use of_property_read_u32_index to access arrays Use an appropriate accessor function for property arrays to make the code nicer and make the code correct if it would ever run on little endian architectures. Suggested by Mark Rutland. Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 7a992546335d..0f3a9531479a 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -2020,9 +2020,7 @@ static int gr_udc_init(struct gr_udc *dev) u32 dmactrl_val; int i; int ret = 0; - u32 *bufsizes; u32 bufsize; - int len; gr_set_address(dev, 0); @@ -2033,19 +2031,17 @@ static int gr_udc_init(struct gr_udc *dev) INIT_LIST_HEAD(&dev->ep_list); gr_set_ep0state(dev, GR_EP0_DISCONNECT); - bufsizes = (u32 *)of_get_property(np, "epobufsizes", &len); - len /= sizeof(u32); for (i = 0; i < dev->nepo; i++) { - bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024; + if (of_property_read_u32_index(np, "epobufsizes", i, &bufsize)) + bufsize = 1024; ret = gr_ep_init(dev, i, 0, bufsize); if (ret) return ret; } - bufsizes = (u32 *)of_get_property(np, "epibufsizes", &len); - len /= sizeof(u32); for (i = 0; i < dev->nepi; i++) { - bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024; + if (of_property_read_u32_index(np, "epibufsizes", i, &bufsize)) + bufsize = 1024; ret = gr_ep_init(dev, i, 1, bufsize); if (ret) return ret; From 5bddbd72c6c02498aba8b48527c86d1398dba3f4 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Thu, 27 Mar 2014 16:15:57 +0100 Subject: [PATCH 015/314] usb: gadget: gr_udc: Add ep.maxpacket_limit to debugfs information Add information on ep.maxpacket_limit for each endpoint in the debugfs information. Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 0f3a9531479a..253e608b57f9 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -143,6 +143,7 @@ static void gr_seq_ep_show(struct seq_file *seq, struct gr_ep *ep) seq_printf(seq, " wedged = %d\n", ep->wedged); seq_printf(seq, " callback = %d\n", ep->callback); seq_printf(seq, " maxpacket = %d\n", ep->ep.maxpacket); + seq_printf(seq, " maxpacket_limit = %d\n", ep->ep.maxpacket_limit); seq_printf(seq, " bytes_per_buffer = %d\n", ep->bytes_per_buffer); if (mode == 1 || mode == 3) seq_printf(seq, " nt = %d\n", From b38d27e5527c33a2a1f5bb3aee39b755e57dea86 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Thu, 27 Mar 2014 16:15:58 +0100 Subject: [PATCH 016/314] usb: gadget: gr_udc: Return error code when trying to set ep.maxpacket > ep.maxpacket_limit Make gr_ep_enable fail properly when a call requests a larger ep.maxpacket than ep.maxpacket_limit. Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 253e608b57f9..72458be7763a 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -1542,6 +1542,10 @@ static int gr_ep_enable(struct usb_ep *_ep, } else if (max == 0) { dev_err(dev->dev, "Max payload cannot be set to 0\n"); return -EINVAL; + } else if (max > ep->ep.maxpacket_limit) { + dev_err(dev->dev, "Requested max payload %d > limit %d\n", + max, ep->ep.maxpacket_limit); + return -EINVAL; } spin_lock(&ep->dev->lock); From 8652bcbfa09ca5ba24423c7c45c28b7d8771e0a8 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Tue, 1 Apr 2014 12:15:17 +0200 Subject: [PATCH 017/314] usb: gadget: gr_udc: Use GFP_ATOMIC when allocating under held spinlock As gr_ep_init must be called with dev->lock held, GFP_KERNEL must not be used. Reported-by: Dan Carpenter Signed-off-by: Andreas Larsson Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 72458be7763a..4966971d6978 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -1990,8 +1990,8 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit) INIT_LIST_HEAD(&ep->queue); if (num == 0) { - _req = gr_alloc_request(&ep->ep, GFP_KERNEL); - buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_KERNEL); + _req = gr_alloc_request(&ep->ep, GFP_ATOMIC); + buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC); if (!_req || !buf) { /* possible _req freed by gr_probe via gr_remove */ return -ENOMEM; From 1e42d20c88f2f56c0d81363d7b0f1d3762037f53 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 2 Apr 2014 13:58:27 +0200 Subject: [PATCH 018/314] usb: musb: add reset hook to platform ops Babble interrupts require us to reset the DSPS glue layer. In order to handle all other recovery tasks independently, add a new hook for platform-specific implementations of the actual reset. Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 7083e82776ff..5514e4c82932 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -192,6 +192,7 @@ struct musb_platform_ops { int (*set_mode)(struct musb *musb, u8 mode); void (*try_idle)(struct musb *musb, unsigned long timeout); + void (*reset)(struct musb *musb); int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); @@ -552,6 +553,12 @@ static inline void musb_platform_try_idle(struct musb *musb, musb->ops->try_idle(musb, timeout); } +static inline void musb_platform_reset(struct musb *musb) +{ + if (musb->ops->reset) + musb->ops->reset(musb); +} + static inline int musb_platform_get_vbus_status(struct musb *musb) { if (!musb->ops->vbus_status) From ca88fc2ef0d790a1da37804219102336f7622b97 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 2 Apr 2014 13:58:28 +0200 Subject: [PATCH 019/314] usb: musb: add a work_struct to recover from babble errors Handle BABBLE interrupt error conditions from a work struct handler. This indirection is necessary as we can't be certain that the phy functions don't sleep. Platform layer implementation may pass a babble error down to the core in order to handle it. Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 35 +++++++++++++++++++++++++++++++++++ drivers/usb/musb/musb_core.h | 1 + 2 files changed, 36 insertions(+) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 07576907e2c6..61da471b7aed 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -848,6 +848,10 @@ b_host: } } + /* handle babble condition */ + if (int_usb & MUSB_INTR_BABBLE) + schedule_work(&musb->recover_work); + #if 0 /* REVISIT ... this would be for multiplexing periodic endpoints, or * supporting transfer phasing to prevent exceeding ISO bandwidth @@ -1746,6 +1750,34 @@ static void musb_irq_work(struct work_struct *data) } } +/* Recover from babble interrupt conditions */ +static void musb_recover_work(struct work_struct *data) +{ + struct musb *musb = container_of(data, struct musb, recover_work); + int status; + + musb_platform_reset(musb); + + usb_phy_vbus_off(musb->xceiv); + udelay(100); + + usb_phy_vbus_on(musb->xceiv); + udelay(100); + + /* + * When a babble condition occurs, the musb controller removes the + * session bit and the endpoint config is lost. + */ + if (musb->dyn_fifo) + status = ep_config_from_table(musb); + else + status = ep_config_from_hw(musb); + + /* start the session again */ + if (status == 0) + musb_start(musb); +} + /* -------------------------------------------------------------------------- * Init support */ @@ -1913,6 +1945,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* Init IRQ workqueue before request_irq */ INIT_WORK(&musb->irq_work, musb_irq_work); + INIT_WORK(&musb->recover_work, musb_recover_work); INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset); INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume); @@ -2008,6 +2041,7 @@ fail4: fail3: cancel_work_sync(&musb->irq_work); + cancel_work_sync(&musb->recover_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); if (musb->dma_controller) @@ -2073,6 +2107,7 @@ static int musb_remove(struct platform_device *pdev) dma_controller_destroy(musb->dma_controller); cancel_work_sync(&musb->irq_work); + cancel_work_sync(&musb->recover_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); musb_free(musb); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 5514e4c82932..47e88747e3a7 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -297,6 +297,7 @@ struct musb { irqreturn_t (*isr)(int, void *); struct work_struct irq_work; + struct work_struct recover_work; struct delayed_work deassert_reset_work; struct delayed_work finish_resume_work; u16 hwvers; From 1d57de306e1f3e73c607811a974f6662162e5df6 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 2 Apr 2014 13:58:29 +0200 Subject: [PATCH 020/314] usb: musb: dsps: handle babble interrupts When the dsps isr sees a babble error, pass it down to the core for fixup. Also, provide a .reset hook so the core can call us back. A babble interrupt error occured when a USB mass storage device ("CHIPSBNK v3.3.9.1", 1e3d:2093) was disconnected from a AM33xx host. Signed-off-by: Daniel Mack Reported-by: Thomas Mellenthin Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 18882924d9d5..138d1dd86235 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -329,9 +329,21 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ - if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) + if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) { pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); + /* + * When a babble condition occurs, the musb controller removes + * the session and is no longer in host mode. Hence, all + * devices connected to its root hub get disconnected. + * + * Hand this error down to the musb core isr, so it can + * recover. + */ + musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT; + musb->int_tx = musb->int_rx = 0; + } + if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { int drvvbus = dsps_readl(reg_base, wrp->status); void __iomem *mregs = musb->mregs; @@ -523,6 +535,16 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode) return 0; } +static void dsps_musb_reset(struct musb *musb) +{ + struct device *dev = musb->controller; + struct dsps_glue *glue = dev_get_drvdata(dev->parent); + const struct dsps_musb_wrapper *wrp = glue->wrp; + + dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset)); + udelay(100); +} + static struct musb_platform_ops dsps_ops = { .init = dsps_musb_init, .exit = dsps_musb_exit, @@ -532,6 +554,7 @@ static struct musb_platform_ops dsps_ops = { .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, + .reset = dsps_musb_reset, }; static u64 musb_dmamask = DMA_BIT_MASK(32); From aea8928aba7d7ee2e6245d44ba7de4c04fc90559 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 8 Apr 2014 10:42:40 +0200 Subject: [PATCH 021/314] usb: dwc3: add glue layer dependencies Glue layers for the DWC3 driver only make sense on specific platforms. Add dependencies so that they are not built where they aren't needed. Cc: Greg Kroah-Hartman Cc: WingMan Kwok Signed-off-by: Jean Delvare Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index e2c730fc9a90..8eb996e4f058 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -44,7 +44,7 @@ comment "Platform Glue Driver Support" config USB_DWC3_OMAP tristate "Texas Instruments OMAP5 and similar Platforms" - depends on EXTCON + depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST) default USB_DWC3 help Some platforms from Texas Instruments like OMAP5, DRA7xxx and @@ -54,6 +54,7 @@ config USB_DWC3_OMAP config USB_DWC3_EXYNOS tristate "Samsung Exynos Platform" + depends on ARCH_EXYNOS || COMPILE_TEST default USB_DWC3 help Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside, @@ -72,6 +73,7 @@ config USB_DWC3_PCI config USB_DWC3_KEYSTONE tristate "Texas Instruments Keystone2 Platforms" + depends on ARCH_KEYSTONE || COMPILE_TEST default USB_DWC3 help Support of USB2/3 functionality in TI Keystone2 platforms. From 9f58fa4c919e1a33e3844f6851735ec9f724bf52 Mon Sep 17 00:00:00 2001 From: Duan Jiong Date: Fri, 11 Apr 2014 18:05:13 +0800 Subject: [PATCH 022/314] usb: gadget: f_subset: replace PTR_RET with PTR_ERR_OR_ZERO PTR_RET is deprecated. Do not recommend its usage anymore. Use PTR_ERR_OR_ZERO instead. Signed-off-by: Duan Jiong Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_subset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index df4a0dcbc993..1ea8baf33333 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -276,7 +276,7 @@ static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } net = gether_connect(&geth->port); - return PTR_RET(net); + return PTR_ERR_OR_ZERO(net); } static void geth_disable(struct usb_function *f) From 5b7839836109a802b144a05cfbd4f57e6564d8e5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 17 Apr 2014 10:20:32 +0200 Subject: [PATCH 023/314] usb: musb: dsps: compile suspend/resume only with PM_SLEEP Depending on PM is not enough, because only PM_RUNTIME could be selected. Fixes: drivers/usb/musb/musb_dsps.c:703:12: warning: 'dsps_suspend' defined but not used [-Wunused-function] drivers/usb/musb/musb_dsps.c:721:12: warning: 'dsps_resume' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dsps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 138d1dd86235..9d9acaaa1f18 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -774,7 +774,7 @@ static const struct of_device_id musb_dsps_of_match[] = { }; MODULE_DEVICE_TABLE(of, musb_dsps_of_match); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int dsps_suspend(struct device *dev) { struct dsps_glue *glue = dev_get_drvdata(dev); From bd8ce544ec35ff362489a7e3c059cf496c06c68e Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Mon, 21 Apr 2014 17:46:44 +0530 Subject: [PATCH 024/314] usb: dwc3: exynos: Make provision for vdd regulators Facilitate getting required 3.3V and 1.0V VDD supply for DWC3 controller on Exynos. With patches for regulators' nodes merged in 3.15: c8c253f ARM: dts: Add regulator entries to smdk5420 275dcd2 ARM: dts: add max77686 pmic node for smdk5250, certain perripherals will now need to ensure that, they request VDD regulators in their drivers, and enable them so as to make them working. Signed-off-by: Vivek Gautam Cc: Anton Tikhomirov Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-exynos.c | 51 ++++++++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index ed22d722884e..0ed85834bfec 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -27,6 +27,7 @@ #include #include #include +#include struct dwc3_exynos { struct platform_device *usb2_phy; @@ -34,6 +35,8 @@ struct dwc3_exynos { struct device *dev; struct clk *clk; + struct regulator *vdd33; + struct regulator *vdd10; }; static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) @@ -144,20 +147,46 @@ static int dwc3_exynos_probe(struct platform_device *pdev) clk_prepare_enable(exynos->clk); + exynos->vdd33 = devm_regulator_get(dev, "vdd33"); + if (IS_ERR(exynos->vdd33)) { + ret = PTR_ERR(exynos->vdd33); + goto err2; + } + ret = regulator_enable(exynos->vdd33); + if (ret) { + dev_err(dev, "Failed to enable VDD33 supply\n"); + goto err2; + } + + exynos->vdd10 = devm_regulator_get(dev, "vdd10"); + if (IS_ERR(exynos->vdd10)) { + ret = PTR_ERR(exynos->vdd10); + goto err3; + } + ret = regulator_enable(exynos->vdd10); + if (ret) { + dev_err(dev, "Failed to enable VDD10 supply\n"); + goto err3; + } + if (node) { ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto err2; + goto err4; } } else { dev_err(dev, "no device node, failed to add dwc3 core\n"); ret = -ENODEV; - goto err2; + goto err4; } return 0; +err4: + regulator_disable(exynos->vdd10); +err3: + regulator_disable(exynos->vdd33); err2: clk_disable_unprepare(clk); err1: @@ -174,6 +203,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev) clk_disable_unprepare(exynos->clk); + regulator_disable(exynos->vdd33); + regulator_disable(exynos->vdd10); + return 0; } @@ -192,12 +224,27 @@ static int dwc3_exynos_suspend(struct device *dev) clk_disable(exynos->clk); + regulator_disable(exynos->vdd33); + regulator_disable(exynos->vdd10); + return 0; } static int dwc3_exynos_resume(struct device *dev) { struct dwc3_exynos *exynos = dev_get_drvdata(dev); + int ret; + + ret = regulator_enable(exynos->vdd33); + if (ret) { + dev_err(dev, "Failed to enable VDD33 supply\n"); + return ret; + } + ret = regulator_enable(exynos->vdd10); + if (ret) { + dev_err(dev, "Failed to enable VDD10 supply\n"); + return ret; + } clk_enable(exynos->clk); From 72ee92d1337007c6c0165fbf62bfb183ae138116 Mon Sep 17 00:00:00 2001 From: Denis Carikli Date: Wed, 23 Apr 2014 15:56:36 +0800 Subject: [PATCH 025/314] usb: chipidea: usbmisc: Add USB support for i.MX25/i.MX35 CPUs This adds the i.MX25 and the i.MX35 support in the ChipIdea usbmisc driver. The i.MX25 and i.MX35 usb controllers are similar enough to be able to use the same code. Signed-off-by: Peter Chen Signed-off-by: Denis Carikli Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/usbmisc_imx.c | 58 ++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index cd061abe3507..419b8959d150 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -21,6 +21,26 @@ #define MX25_USB_PHY_CTRL_OFFSET 0x08 #define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23) +#define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MX25_EHCI_INTERFACE_MASK (0xf) + +#define MX25_OTG_SIC_SHIFT 29 +#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) +#define MX25_OTG_PM_BIT BIT(24) +#define MX25_OTG_PP_BIT BIT(11) +#define MX25_OTG_OCPOL_BIT BIT(3) + +#define MX25_H1_SIC_SHIFT 21 +#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PP_BIT BIT(18) +#define MX25_H1_PM_BIT BIT(16) +#define MX25_H1_IPPUE_UP_BIT BIT(7) +#define MX25_H1_IPPUE_DOWN_BIT BIT(6) +#define MX25_H1_TLL_BIT BIT(5) +#define MX25_H1_USBTE_BIT BIT(4) +#define MX25_H1_OCPOL_BIT BIT(2) + #define MX27_H1_PM_BIT BIT(8) #define MX27_H2_PM_BIT BIT(16) #define MX27_OTG_PM_BIT BIT(24) @@ -50,6 +70,39 @@ struct imx_usbmisc { static struct imx_usbmisc *usbmisc; +static int usbmisc_imx25_init(struct imx_usbmisc_data *data) +{ + unsigned long flags; + u32 val = 0; + + if (data->index > 1) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + switch (data->index) { + case 0: + val = readl(usbmisc->base); + val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); + val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; + val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); + writel(val, usbmisc->base); + break; + case 1: + val = readl(usbmisc->base); + val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT | MX25_H1_IPPUE_UP_BIT); + val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; + val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | + MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); + + writel(val, usbmisc->base); + + break; + } + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + static int usbmisc_imx25_post(struct imx_usbmisc_data *data) { void __iomem *reg; @@ -159,6 +212,7 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) } static const struct usbmisc_ops imx25_usbmisc_ops = { + .init = usbmisc_imx25_init, .post = usbmisc_imx25_post, }; @@ -199,6 +253,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,imx25-usbmisc", .data = &imx25_usbmisc_ops, }, + { + .compatible = "fsl,imx35-usbmisc", + .data = &imx25_usbmisc_ops, + }, { .compatible = "fsl,imx27-usbmisc", .data = &imx27_usbmisc_ops, From d03cccff9c768342d9576dde744ab3acb69d3ad4 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 23 Apr 2014 15:56:37 +0800 Subject: [PATCH 026/314] usb: chipidea: coordinate usb phy initialization for different phy type For internal PHY (like UTMI), the phy clock may from internal pll, it is on/off on the fly, the access PORTSC.PTS will hang without phy clock. So, the usb_phy_init which will open phy clock needs to be called before hw_phymode_configure. See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2 For external PHY (like ulpi), it needs to configure portsc.pts before visit viewport, or the viewport can't be visited. so phy_phymode_configure needs to be called before usb_phy_init. See: cd0b42c2a6d2a74244f0053f8960f5dad5842278 It may not the best solution, but it can work for all situations. Cc: Sascha Hauer Cc: Chris Ruehl Cc: shc_work@mail.ru Cc: denis@eukrea.com Cc: festevam@gmail.com Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index ca6831c5b763..1cd5d0ba587c 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -276,6 +276,39 @@ static void hw_phymode_configure(struct ci_hdrc *ci) } } +/** + * ci_usb_phy_init: initialize phy according to different phy type + * @ci: the controller + * + * This function returns an error code if usb_phy_init has failed + */ +static int ci_usb_phy_init(struct ci_hdrc *ci) +{ + int ret; + + switch (ci->platdata->phy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + case USBPHY_INTERFACE_MODE_UTMIW: + case USBPHY_INTERFACE_MODE_HSIC: + ret = usb_phy_init(ci->transceiver); + if (ret) + return ret; + hw_phymode_configure(ci); + break; + case USBPHY_INTERFACE_MODE_ULPI: + case USBPHY_INTERFACE_MODE_SERIAL: + hw_phymode_configure(ci); + ret = usb_phy_init(ci->transceiver); + if (ret) + return ret; + break; + default: + ret = usb_phy_init(ci->transceiver); + } + + return ret; +} + /** * hw_device_reset: resets chip (execute without interruption) * @ci: the controller @@ -543,8 +576,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } - hw_phymode_configure(ci); - if (ci->platdata->phy) ci->transceiver = ci->platdata->phy; else @@ -564,7 +595,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - ret = usb_phy_init(ci->transceiver); + ret = ci_usb_phy_init(ci); if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); return ret; From 0c33bf781a0da4bdab207ccc323c9afa940852af Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:38 +0800 Subject: [PATCH 027/314] usb: chipidea: operate on otgsc register in a general way Use a more general way to read and write otgsc register. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 16 ++++++++++------ drivers/usb/chipidea/otg.c | 33 ++++++++++++++++++++++++--------- drivers/usb/chipidea/otg.h | 18 ++---------------- drivers/usb/chipidea/udc.c | 19 ++++++++++--------- 4 files changed, 46 insertions(+), 40 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 1cd5d0ba587c..f0cfa5b64bf1 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -393,7 +393,7 @@ static irqreturn_t ci_irq(int irq, void *data) u32 otgsc = 0; if (ci->is_otg) - otgsc = hw_read(ci, OP_OTGSC, ~0); + otgsc = hw_read_otgsc(ci, ~0); /* * Handle id change interrupt, it indicates device/host function @@ -401,7 +401,8 @@ static irqreturn_t ci_irq(int irq, void *data) */ if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { ci->id_event = true; - ci_clear_otg_interrupt(ci, OTGSC_IDIS); + /* Clear ID change irq status */ + hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); disable_irq_nosync(ci->irq); queue_work(ci->wq, &ci->work); return IRQ_HANDLED; @@ -413,7 +414,8 @@ static irqreturn_t ci_irq(int irq, void *data) */ if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { ci->b_sess_valid_event = true; - ci_clear_otg_interrupt(ci, OTGSC_BSVIS); + /* Clear BSV irq */ + hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); disable_irq_nosync(ci->irq); queue_work(ci->wq, &ci->work); return IRQ_HANDLED; @@ -535,8 +537,9 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) == (DCCPARAMS_DC | DCCPARAMS_HC)); if (ci->is_otg) { dev_dbg(ci->dev, "It is OTG capable controller\n"); - ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS); - ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS); + /* Disable and clear all OTG irq */ + hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, + OTGSC_INT_STATUS_BITS); } } @@ -648,7 +651,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) */ mdelay(2); ci->role = ci_otg_role(ci); - ci_enable_otg_interrupt(ci, OTGSC_IDIE); + /* Enable ID change irq */ + hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); } else { /* * If the controller is not OTG capable, but support diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index 39bd7ec8bf75..c6943401a0b3 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -23,14 +23,32 @@ #include "bits.h" #include "otg.h" +/** + * hw_read_otgsc returns otgsc register bits value. + * @mask: bitfield mask + */ +u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) +{ + return hw_read(ci, OP_OTGSC, mask); +} + +/** + * hw_write_otgsc updates target bits of OTGSC register. + * @mask: bitfield mask + * @data: to be written + */ +void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) +{ + hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data); +} + /** * ci_otg_role - pick role based on ID pin state * @ci: the controller */ enum ci_role ci_otg_role(struct ci_hdrc *ci) { - u32 sts = hw_read(ci, OP_OTGSC, ~0); - enum ci_role role = sts & OTGSC_ID + enum ci_role role = hw_read_otgsc(ci, OTGSC_ID) ? CI_ROLE_GADGET : CI_ROLE_HOST; @@ -39,14 +57,10 @@ enum ci_role ci_otg_role(struct ci_hdrc *ci) void ci_handle_vbus_change(struct ci_hdrc *ci) { - u32 otgsc; - if (!ci->is_otg) return; - otgsc = hw_read(ci, OP_OTGSC, ~0); - - if (otgsc & OTGSC_BSV) + if (hw_read_otgsc(ci, OTGSC_BSV)) usb_gadget_vbus_connect(&ci->gadget); else usb_gadget_vbus_disconnect(&ci->gadget); @@ -115,6 +129,7 @@ void ci_hdrc_otg_destroy(struct ci_hdrc *ci) flush_workqueue(ci->wq); destroy_workqueue(ci->wq); } - ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS); - ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS); + /* Disable all OTG irq and clear status */ + hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, + OTGSC_INT_STATUS_BITS); } diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h index 449bee07f4fe..734926754113 100644 --- a/drivers/usb/chipidea/otg.h +++ b/drivers/usb/chipidea/otg.h @@ -11,22 +11,8 @@ #ifndef __DRIVERS_USB_CHIPIDEA_OTG_H #define __DRIVERS_USB_CHIPIDEA_OTG_H -static inline void ci_clear_otg_interrupt(struct ci_hdrc *ci, u32 bits) -{ - /* Only clear request bits */ - hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, bits); -} - -static inline void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits) -{ - hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, bits); -} - -static inline void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits) -{ - hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, 0); -} - +u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask); +void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data); int ci_hdrc_otg_init(struct ci_hdrc *ci); void ci_hdrc_otg_destroy(struct ci_hdrc *ci); enum ci_role ci_otg_role(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 7739c64ef259..798943b6ef7b 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1843,21 +1843,22 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) static int udc_id_switch_for_device(struct ci_hdrc *ci) { - if (ci->is_otg) { - ci_clear_otg_interrupt(ci, OTGSC_BSVIS); - ci_enable_otg_interrupt(ci, OTGSC_BSVIE); - } + if (ci->is_otg) + /* Clear and enable BSV irq */ + hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, + OTGSC_BSVIS | OTGSC_BSVIE); return 0; } static void udc_id_switch_for_host(struct ci_hdrc *ci) { - if (ci->is_otg) { - /* host doesn't care B_SESSION_VALID event */ - ci_clear_otg_interrupt(ci, OTGSC_BSVIS); - ci_disable_otg_interrupt(ci, OTGSC_BSVIE); - } + /* + * host doesn't care B_SESSION_VALID event + * so clear and disbale BSV irq + */ + if (ci->is_otg) + hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); } /** From 36304b0616280809a58ebdd69d74f7c61286f9b5 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:39 +0800 Subject: [PATCH 028/314] usb: chipidea: export interrupt enable and status register read functions This patch moves usb interrupt enable and status register read functions from udc driver to core driver to use them in all ci drivers. Signed-off-by: Peter Chen Acked-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci.h | 4 ++++ drivers/usb/chipidea/core.c | 20 ++++++++++++++++++++ drivers/usb/chipidea/udc.c | 20 -------------------- 3 files changed, 24 insertions(+), 20 deletions(-) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index e206406ae1d9..7ae8cb680321 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -319,6 +319,10 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg, return (val & mask) >> __ffs(mask); } +u32 hw_read_intr_enable(struct ci_hdrc *ci); + +u32 hw_read_intr_status(struct ci_hdrc *ci); + int hw_device_reset(struct ci_hdrc *ci, u32 mode); int hw_port_test_set(struct ci_hdrc *ci, u8 mode); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index f0cfa5b64bf1..ff38cf367464 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -139,6 +139,26 @@ static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) return 0; } +/** + * hw_read_intr_enable: returns interrupt enable register + * + * This function returns register data + */ +u32 hw_read_intr_enable(struct ci_hdrc *ci) +{ + return hw_read(ci, OP_USBINTR, ~0); +} + +/** + * hw_read_intr_status: returns interrupt status register + * + * This function returns register data + */ +u32 hw_read_intr_status(struct ci_hdrc *ci) +{ + return hw_read(ci, OP_USBSTS, ~0); +} + /** * hw_port_test_set: writes port test mode (execute without interruption) * @mode: new value diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 798943b6ef7b..f58857d45050 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -241,26 +241,6 @@ static int hw_port_is_high_speed(struct ci_hdrc *ci) hw_read(ci, OP_PORTSC, PORTSC_HSP); } -/** - * hw_read_intr_enable: returns interrupt enable register - * - * This function returns register data - */ -static u32 hw_read_intr_enable(struct ci_hdrc *ci) -{ - return hw_read(ci, OP_USBINTR, ~0); -} - -/** - * hw_read_intr_status: returns interrupt status register - * - * This function returns register data - */ -static u32 hw_read_intr_status(struct ci_hdrc *ci) -{ - return hw_read(ci, OP_USBSTS, ~0); -} - /** * hw_test_and_clear_complete: test & clear complete status (execute without * interruption) From c4a8b6392a3f131259aa2392cfc6bb6d0ca549f9 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:40 +0800 Subject: [PATCH 029/314] usb: chipidea: debug: add debug file for controller registers dump This patch adds below registers dump for debug: - USBINTR - USBSTS - USBMODE - USBCMD - PORTSC - OTGSC Signed-off-by: Peter Chen Acked-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/debug.c | 51 ++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 96d899aee473..5b890c1e69e0 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -12,6 +12,7 @@ #include "udc.h" #include "bits.h" #include "debug.h" +#include "otg.h" /** * ci_device_show: prints information about device capabilities and status @@ -253,6 +254,50 @@ static const struct file_operations ci_role_fops = { .release = single_release, }; +int ci_registers_show(struct seq_file *s, void *unused) +{ + struct ci_hdrc *ci = s->private; + u32 tmp_reg; + + if (!ci) + return 0; + + /* ------ Registers ----- */ + tmp_reg = hw_read_intr_enable(ci); + seq_printf(s, "USBINTR reg: %08x\n", tmp_reg); + + tmp_reg = hw_read_intr_status(ci); + seq_printf(s, "USBSTS reg: %08x\n", tmp_reg); + + tmp_reg = hw_read(ci, OP_USBMODE, ~0); + seq_printf(s, "USBMODE reg: %08x\n", tmp_reg); + + tmp_reg = hw_read(ci, OP_USBCMD, ~0); + seq_printf(s, "USBCMD reg: %08x\n", tmp_reg); + + tmp_reg = hw_read(ci, OP_PORTSC, ~0); + seq_printf(s, "PORTSC reg: %08x\n", tmp_reg); + + if (ci->is_otg) { + tmp_reg = hw_read_otgsc(ci, ~0); + seq_printf(s, "OTGSC reg: %08x\n", tmp_reg); + } + + return 0; +} + +static int ci_registers_open(struct inode *inode, struct file *file) +{ + return single_open(file, ci_registers_show, inode->i_private); +} + +static const struct file_operations ci_registers_fops = { + .open = ci_registers_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /** * dbg_create_files: initializes the attribute interface * @ci: device @@ -289,6 +334,12 @@ int dbg_create_files(struct ci_hdrc *ci) dent = debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, &ci_role_fops); + if (!dent) + goto err; + + dent = debugfs_create_file("registers", S_IRUGO, ci->debugfs, ci, + &ci_registers_fops); + if (dent) return 0; err: From 90893b90d372f9c721ab8cd64b66230670deded3 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 23 Apr 2014 15:56:41 +0800 Subject: [PATCH 030/314] usb: chipidea: add proper delay for waiting correct PHY status After the PHY has powered and initialized, it needs some delay for controller to reflect PHY's status. Some status and values for id, vbus, dp/dm are only stable after this delay. The current code tries to clear id/vbus status without enough delay, it causes the status are not cleared properly. This patch add 2ms delay after phy has initialized, and clear the unexpected status after that. Signed-off-by: Peter Chen Tested-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index ff38cf367464..d506f342d013 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -199,11 +199,10 @@ static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), 0); /* - * The controller needs at least 1ms to reflect - * PHY's status, the PHY also needs some time (less + * the PHY needs some time (less * than 1ms) to leave low power mode. */ - usleep_range(1500, 2000); + usleep_range(1000, 1100); } } @@ -555,12 +554,8 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC) == (DCCPARAMS_DC | DCCPARAMS_HC)); - if (ci->is_otg) { + if (ci->is_otg) dev_dbg(ci->dev, "It is OTG capable controller\n"); - /* Disable and clear all OTG irq */ - hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, - OTGSC_INT_STATUS_BITS); - } } static int ci_hdrc_probe(struct platform_device *pdev) @@ -622,6 +617,13 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); return ret; + } else { + /* + * The delay to sync PHY's status, the maximum delay is + * 2ms since the otgsc uses 1ms timer to debounce the + * PHY's input + */ + usleep_range(2000, 2500); } ci->hw_bank.phys = res->start; @@ -656,6 +658,9 @@ static int ci_hdrc_probe(struct platform_device *pdev) } if (ci->is_otg) { + /* Disable and clear all OTG irq */ + hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, + OTGSC_INT_STATUS_BITS); ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); @@ -665,11 +670,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { if (ci->is_otg) { - /* - * ID pin needs 1ms debouce time, - * we delay 2ms for safe. - */ - mdelay(2); ci->role = ci_otg_role(ci); /* Enable ID change irq */ hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); From 7cf2f86102b7d737130d8cf0f223b0ae6b8a3eac Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 23 Apr 2014 15:56:42 +0800 Subject: [PATCH 031/314] usb: chipidea: core: Add missing module owner field Signed-off-by: Alexander Shiyan Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index d506f342d013..6a6379a8f1f5 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -735,6 +735,7 @@ static struct platform_driver ci_hdrc_driver = { .remove = ci_hdrc_remove, .driver = { .name = "ci_hdrc", + .owner = THIS_MODULE, }, }; From be696aac3850f481a9d1dfea7ea1c9505ecc970b Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:43 +0800 Subject: [PATCH 032/314] usb: phy: otg-fsm: export symbol of otg_statemachine This patch exports symbol of otg_statemachine for kernel module can use it. Acked-by: Felipe Balbi Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy-fsm-usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c index c47e5a6edde2..a62d8c82e8b7 100644 --- a/drivers/usb/phy/phy-fsm-usb.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -363,3 +363,4 @@ int otg_statemachine(struct otg_fsm *fsm) VDBG("quit statemachine, changed = %d\n", state_changed); return state_changed; } +EXPORT_SYMBOL_GPL(otg_statemachine); From 57677be5ef838743561f4c1d16821dda0438d362 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:44 +0800 Subject: [PATCH 033/314] usb: chipidea: usb OTG fsm initialization. This patch adds OTG fsm related initialization when do otg init, add a seperate file for OTG fsm related utilities. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/Makefile | 1 + drivers/usb/chipidea/ci.h | 17 +++++++++ drivers/usb/chipidea/otg.c | 4 +++ drivers/usb/chipidea/otg_fsm.c | 63 ++++++++++++++++++++++++++++++++++ drivers/usb/chipidea/otg_fsm.h | 29 ++++++++++++++++ 5 files changed, 114 insertions(+) create mode 100644 drivers/usb/chipidea/otg_fsm.c create mode 100644 drivers/usb/chipidea/otg_fsm.h diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 480bd4d5710a..2f099c7df7b5 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -6,6 +6,7 @@ ci_hdrc-y := core.o otg.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o +ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 7ae8cb680321..bd3529f29e86 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -17,6 +17,7 @@ #include #include #include +#include /****************************************************************************** * DEFINE @@ -139,6 +140,7 @@ struct hw_bank { * @roles: array of supported roles for this controller * @role: current role * @is_otg: if the device is otg-capable + * @fsm: otg finite state machine * @work: work for role changing * @wq: workqueue thread * @qh_pool: allocation pool for queue heads @@ -174,6 +176,7 @@ struct ci_hdrc { struct ci_role_driver *roles[CI_ROLE_END]; enum ci_role role; bool is_otg; + struct otg_fsm fsm; struct work_struct work; struct workqueue_struct *wq; @@ -319,6 +322,20 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg, return (val & mask) >> __ffs(mask); } +/** + * ci_otg_is_fsm_mode: runtime check if otg controller + * is in otg fsm mode. + */ +static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) +{ +#ifdef CONFIG_USB_OTG_FSM + return ci->is_otg && ci->roles[CI_ROLE_HOST] && + ci->roles[CI_ROLE_GADGET]; +#else + return false; +#endif +} + u32 hw_read_intr_enable(struct ci_hdrc *ci); u32 hw_read_intr_status(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index c6943401a0b3..d76db51ecda7 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -22,6 +22,7 @@ #include "ci.h" #include "bits.h" #include "otg.h" +#include "otg_fsm.h" /** * hw_read_otgsc returns otgsc register bits value. @@ -116,6 +117,9 @@ int ci_hdrc_otg_init(struct ci_hdrc *ci) return -ENODEV; } + if (ci_otg_is_fsm_mode(ci)) + return ci_hdrc_otg_fsm_init(ci); + return 0; } diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c new file mode 100644 index 000000000000..d9dfaa3cf40c --- /dev/null +++ b/drivers/usb/chipidea/otg_fsm.c @@ -0,0 +1,63 @@ +/* + * otg_fsm.c - ChipIdea USB IP core OTG FSM driver + * + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * Author: Jun Li + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This file mainly handles OTG fsm, it includes OTG fsm operations + * for HNP and SRP. + */ + +#include +#include +#include +#include + +#include "ci.h" +#include "bits.h" +#include "otg.h" +#include "otg_fsm.h" + +int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) +{ + struct usb_otg *otg; + + otg = devm_kzalloc(ci->dev, + sizeof(struct usb_otg), GFP_KERNEL); + if (!otg) { + dev_err(ci->dev, + "Failed to allocate usb_otg structure for ci hdrc otg!\n"); + return -ENOMEM; + } + + otg->phy = ci->transceiver; + otg->gadget = &ci->gadget; + ci->fsm.otg = otg; + ci->transceiver->otg = ci->fsm.otg; + ci->fsm.power_up = 1; + ci->fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0; + ci->transceiver->state = OTG_STATE_UNDEFINED; + + mutex_init(&ci->fsm.lock); + + /* Enable A vbus valid irq */ + hw_write_otgsc(ci, OTGSC_AVVIE, OTGSC_AVVIE); + + if (ci->fsm.id) { + ci->fsm.b_ssend_srp = + hw_read_otgsc(ci, OTGSC_BSV) ? 0 : 1; + ci->fsm.b_sess_vld = + hw_read_otgsc(ci, OTGSC_BSV) ? 1 : 0; + /* Enable BSV irq */ + hw_write_otgsc(ci, OTGSC_BSVIE, OTGSC_BSVIE); + } + + return 0; +} diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h new file mode 100644 index 000000000000..bf20a851b601 --- /dev/null +++ b/drivers/usb/chipidea/otg_fsm.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * Author: Jun Li + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DRIVERS_USB_CHIPIDEA_OTG_FSM_H +#define __DRIVERS_USB_CHIPIDEA_OTG_FSM_H + +#include + +#ifdef CONFIG_USB_OTG_FSM + +int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); + +#else + +static inline int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) +{ + return 0; +} + +#endif + +#endif /* __DRIVERS_USB_CHIPIDEA_OTG_FSM_H */ From 8a28b904ad9146cfb217e814f6d07355b1f77536 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:45 +0800 Subject: [PATCH 034/314] usb: chipidea: host: vbus control change for OTG HNP Leave vbus on/off hanlded by OTG fsm if in OTG mode. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/host.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index a8ac6c16dac9..ffb41688c49f 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -67,7 +67,11 @@ static int host_start(struct ci_hdrc *ci) ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; ehci->imx28_write_fix = ci->imx28_write_fix; - if (ci->platdata->reg_vbus) { + /* + * vbus is always on if host is not in OTG FSM mode, + * otherwise should be controlled by OTG FSM + */ + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { ret = regulator_enable(ci->platdata->reg_vbus); if (ret) { dev_err(ci->dev, @@ -89,7 +93,7 @@ static int host_start(struct ci_hdrc *ci) return ret; disable_reg: - if (ci->platdata->reg_vbus) + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) regulator_disable(ci->platdata->reg_vbus); put_hcd: @@ -105,7 +109,7 @@ static void host_stop(struct ci_hdrc *ci) if (hcd) { usb_remove_hcd(hcd); usb_put_hcd(hcd); - if (ci->platdata->reg_vbus) + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) regulator_disable(ci->platdata->reg_vbus); } } From 0698b9b384d39ae8e855bbffac180ad5773efa72 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:46 +0800 Subject: [PATCH 035/314] usb: chipidea: host: init otg port number Init otg_port number of otg capable host to be 1 at host start. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/host.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index ffb41688c49f..a93d950e9468 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -82,10 +82,17 @@ static int host_start(struct ci_hdrc *ci) } ret = usb_add_hcd(hcd, 0, 0); - if (ret) + if (ret) { goto disable_reg; - else + } else { + struct usb_otg *otg = ci->transceiver->otg; + ci->hcd = hcd; + if (otg) { + otg->host = &hcd->self; + hcd->self.otg_port = 1; + } + } if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); From 95f5555fa0f0176da338e8f42bca08f236032832 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:47 +0800 Subject: [PATCH 036/314] usb: chipidea: udc: driver update for OTG HNP Add b_hnp_enable request handling and enable gadget->is_otg Signed-off-by: Peter Chen Acked-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index f58857d45050..cba7fd63d6e3 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include "ci.h" @@ -1052,6 +1053,14 @@ __acquires(ci->lock) default: break; } + break; + case USB_DEVICE_B_HNP_ENABLE: + if (ci_otg_is_fsm_mode(ci)) { + ci->gadget.b_hnp_enable = 1; + err = isr_setup_status_phase( + ci); + } + break; default: goto delegate; } @@ -1759,7 +1768,7 @@ static int udc_start(struct ci_hdrc *ci) ci->gadget.ops = &usb_gadget_ops; ci->gadget.speed = USB_SPEED_UNKNOWN; ci->gadget.max_speed = USB_SPEED_HIGH; - ci->gadget.is_otg = 0; + ci->gadget.is_otg = ci->is_otg ? 1 : 0; ci->gadget.name = ci->platdata->name; INIT_LIST_HEAD(&ci->gadget.ep_list); From 826cfe751f3e1faf4a63b65245f5ee3a7efeb763 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:48 +0800 Subject: [PATCH 037/314] usb: chipidea: add OTG fsm operation functions implementation Add OTG HNP and SRP operation functions implementation: - charge vbus - drive vbus - connection signaling - drive sof - start data pulse - add fsm timer - delete fsm timer - start host - start gadget Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/bits.h | 9 ++ drivers/usb/chipidea/ci.h | 2 + drivers/usb/chipidea/otg_fsm.c | 197 +++++++++++++++++++++++++++++++++ drivers/usb/chipidea/otg_fsm.h | 25 +++++ 4 files changed, 233 insertions(+) diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h index 83d06c1455b7..44882c8133d6 100644 --- a/drivers/usb/chipidea/bits.h +++ b/drivers/usb/chipidea/bits.h @@ -44,9 +44,14 @@ #define DEVICEADDR_USBADR (0x7FUL << 25) /* PORTSC */ +#define PORTSC_CCS BIT(0) +#define PORTSC_CSC BIT(1) +#define PORTSC_PEC BIT(3) +#define PORTSC_OCC BIT(5) #define PORTSC_FPR BIT(6) #define PORTSC_SUSP BIT(7) #define PORTSC_HSP BIT(9) +#define PORTSC_PP BIT(12) #define PORTSC_PTC (0x0FUL << 16) #define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23)) /* PTS and PTW for non lpm version only */ @@ -56,6 +61,9 @@ #define PORTSC_PTW BIT(28) #define PORTSC_STS BIT(29) +#define PORTSC_W1C_BITS \ + (PORTSC_CSC | PORTSC_PEC | PORTSC_OCC) + /* DEVLC */ #define DEVLC_PFSC BIT(23) #define DEVLC_PSPD (0x03UL << 25) @@ -72,6 +80,7 @@ /* OTGSC */ #define OTGSC_IDPU BIT(5) +#define OTGSC_HADP BIT(6) #define OTGSC_ID BIT(8) #define OTGSC_AVV BIT(9) #define OTGSC_ASV BIT(10) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index bd3529f29e86..9563cb56d564 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -141,6 +141,7 @@ struct hw_bank { * @role: current role * @is_otg: if the device is otg-capable * @fsm: otg finite state machine + * @fsm_timer: pointer to timer list of otg fsm * @work: work for role changing * @wq: workqueue thread * @qh_pool: allocation pool for queue heads @@ -177,6 +178,7 @@ struct ci_hdrc { enum ci_role role; bool is_otg; struct otg_fsm fsm; + struct ci_otg_fsm_timer_list *fsm_timer; struct work_struct work; struct workqueue_struct *wq; diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index d9dfaa3cf40c..5afeb59acaa6 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -19,12 +19,208 @@ #include #include #include +#include #include "ci.h" #include "bits.h" #include "otg.h" #include "otg_fsm.h" +/* + * Add timer to active timer list + */ +static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) +{ + struct ci_otg_fsm_timer *tmp_timer; + struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t]; + struct list_head *active_timers = &ci->fsm_timer->active_timers; + + if (t >= NUM_CI_OTG_FSM_TIMERS) + return; + + /* + * Check if the timer is already in the active list, + * if so update timer count + */ + list_for_each_entry(tmp_timer, active_timers, list) + if (tmp_timer == timer) { + timer->count = timer->expires; + return; + } + + timer->count = timer->expires; + list_add_tail(&timer->list, active_timers); + + /* Enable 1ms irq */ + if (!(hw_read_otgsc(ci, OTGSC_1MSIE))) + hw_write_otgsc(ci, OTGSC_1MSIE, OTGSC_1MSIE); +} + +/* + * Remove timer from active timer list + */ +static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) +{ + struct ci_otg_fsm_timer *tmp_timer, *del_tmp; + struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t]; + struct list_head *active_timers = &ci->fsm_timer->active_timers; + + if (t >= NUM_CI_OTG_FSM_TIMERS) + return; + + list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) + if (tmp_timer == timer) + list_del(&timer->list); + + /* Disable 1ms irq if there is no any active timer */ + if (list_empty(active_timers)) + hw_write_otgsc(ci, OTGSC_1MSIE, 0); +} + +/* -------------------------------------------------------------*/ +/* Operations that will be called from OTG Finite State Machine */ +/* -------------------------------------------------------------*/ +static void ci_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + if (t < NUM_OTG_FSM_TIMERS) + ci_otg_add_timer(ci, t); + return; +} + +static void ci_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + if (t < NUM_OTG_FSM_TIMERS) + ci_otg_del_timer(ci, t); + return; +} + +/* + * A-device drive vbus: turn on vbus regulator and enable port power + * Data pulse irq should be disabled while vbus is on. + */ +static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on) +{ + int ret; + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + if (on) { + /* Enable power power */ + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, + PORTSC_PP); + if (ci->platdata->reg_vbus) { + ret = regulator_enable(ci->platdata->reg_vbus); + if (ret) { + dev_err(ci->dev, + "Failed to enable vbus regulator, ret=%d\n", + ret); + return; + } + } + /* Disable data pulse irq */ + hw_write_otgsc(ci, OTGSC_DPIE, 0); + + fsm->a_srp_det = 0; + fsm->power_up = 0; + } else { + if (ci->platdata->reg_vbus) + regulator_disable(ci->platdata->reg_vbus); + + fsm->a_bus_drop = 1; + fsm->a_bus_req = 0; + } +} + +/* + * Control data line by Run Stop bit. + */ +static void ci_otg_loc_conn(struct otg_fsm *fsm, int on) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + if (on) + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); + else + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); +} + +/* + * Generate SOF by host. + * This is controlled through suspend/resume the port. + * In host mode, controller will automatically send SOF. + * Suspend will block the data on the port. + */ +static void ci_otg_loc_sof(struct otg_fsm *fsm, int on) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + if (on) + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_FPR, + PORTSC_FPR); + else + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_SUSP, + PORTSC_SUSP); +} + +/* + * Start SRP pulsing by data-line pulsing, + * no v-bus pulsing followed + */ +static void ci_otg_start_pulse(struct otg_fsm *fsm) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + /* Hardware Assistant Data pulse */ + hw_write_otgsc(ci, OTGSC_HADP, OTGSC_HADP); + + ci_otg_add_timer(ci, B_DATA_PLS); +} + +static int ci_otg_start_host(struct otg_fsm *fsm, int on) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + mutex_unlock(&fsm->lock); + if (on) { + ci_role_stop(ci); + ci_role_start(ci, CI_ROLE_HOST); + } else { + ci_role_stop(ci); + hw_device_reset(ci, USBMODE_CM_DC); + ci_role_start(ci, CI_ROLE_GADGET); + } + mutex_lock(&fsm->lock); + return 0; +} + +static int ci_otg_start_gadget(struct otg_fsm *fsm, int on) +{ + struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm); + + mutex_unlock(&fsm->lock); + if (on) + usb_gadget_vbus_connect(&ci->gadget); + else + usb_gadget_vbus_disconnect(&ci->gadget); + mutex_lock(&fsm->lock); + + return 0; +} + +static struct otg_fsm_ops ci_otg_ops = { + .drv_vbus = ci_otg_drv_vbus, + .loc_conn = ci_otg_loc_conn, + .loc_sof = ci_otg_loc_sof, + .start_pulse = ci_otg_start_pulse, + .add_timer = ci_otg_fsm_add_timer, + .del_timer = ci_otg_fsm_del_timer, + .start_host = ci_otg_start_host, + .start_gadget = ci_otg_start_gadget, +}; + int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) { struct usb_otg *otg; @@ -44,6 +240,7 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) ci->fsm.power_up = 1; ci->fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0; ci->transceiver->state = OTG_STATE_UNDEFINED; + ci->fsm.ops = &ci_otg_ops; mutex_init(&ci->fsm.lock); diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index bf20a851b601..4d0dfe6900d6 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -13,6 +13,31 @@ #include +enum ci_otg_fsm_timer_index { + /* + * CI specific timers, start from the end + * of standard and auxiliary OTG timers + */ + B_DATA_PLS = NUM_OTG_FSM_TIMERS, + B_SSEND_SRP, + B_SESS_VLD, + + NUM_CI_OTG_FSM_TIMERS, +}; + +struct ci_otg_fsm_timer { + unsigned long expires; /* Number of count increase to timeout */ + unsigned long count; /* Tick counter */ + void (*function)(void *, unsigned long); /* Timeout function */ + unsigned long data; /* Data passed to function */ + struct list_head list; +}; + +struct ci_otg_fsm_timer_list { + struct ci_otg_fsm_timer *timer_list[NUM_CI_OTG_FSM_TIMERS]; + struct list_head active_timers; +}; + #ifdef CONFIG_USB_OTG_FSM int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); From e287b67b00c8d5306e0fe6be1d597e23d8c4783e Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:49 +0800 Subject: [PATCH 038/314] usb: chipidea: OTG fsm timers initialization This patch adds OTG fsm timers initialization, which use controller's 1ms interrupt as timeout counter, also adds some local timers which are not in otg_fsm_timer list. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/bits.h | 1 + drivers/usb/chipidea/otg_fsm.c | 189 +++++++++++++++++++++++++++++++++ drivers/usb/chipidea/otg_fsm.h | 51 +++++++++ 3 files changed, 241 insertions(+) diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h index 44882c8133d6..ca57e3dcd3d5 100644 --- a/drivers/usb/chipidea/bits.h +++ b/drivers/usb/chipidea/bits.h @@ -81,6 +81,7 @@ /* OTGSC */ #define OTGSC_IDPU BIT(5) #define OTGSC_HADP BIT(6) +#define OTGSC_HABA BIT(7) #define OTGSC_ID BIT(8) #define OTGSC_AVV BIT(9) #define OTGSC_ASV BIT(10) diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 5afeb59acaa6..bb64fb486eef 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -26,6 +26,22 @@ #include "otg.h" #include "otg_fsm.h" +static struct ci_otg_fsm_timer *otg_timer_initializer +(struct ci_hdrc *ci, void (*function)(void *, unsigned long), + unsigned long expires, unsigned long data) +{ + struct ci_otg_fsm_timer *timer; + + timer = devm_kzalloc(ci->dev, sizeof(struct ci_otg_fsm_timer), + GFP_KERNEL); + if (!timer) + return NULL; + timer->function = function; + timer->expires = expires; + timer->data = data; + return timer; +} + /* * Add timer to active timer list */ @@ -77,6 +93,163 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) hw_write_otgsc(ci, OTGSC_1MSIE, 0); } +/* The timeout callback function to set time out bit */ +static void set_tmout(void *ptr, unsigned long indicator) +{ + *(int *)indicator = 1; +} + +static void set_tmout_and_fsm(void *ptr, unsigned long indicator) +{ + struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + + set_tmout(ci, indicator); + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); +} + +static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator) +{ + struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + + set_tmout(ci, indicator); + /* Disable port power */ + hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 0); + /* Clear exsiting DP irq */ + hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); + /* Enable data pulse irq */ + hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE); + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); +} + +static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator) +{ + struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + + set_tmout(ci, indicator); + if (!hw_read_otgsc(ci, OTGSC_BSV)) + ci->fsm.b_sess_vld = 0; + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); +} + +static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator) +{ + struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + + set_tmout(ci, indicator); + + /* only vbus fall below B_sess_vld in b_idle state */ + if (ci->transceiver->state == OTG_STATE_B_IDLE) { + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } +} + +static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator) +{ + struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + + /* Check if A detached */ + if (!(hw_read_otgsc(ci, OTGSC_BSV))) { + ci->fsm.b_sess_vld = 0; + ci_otg_add_timer(ci, B_SSEND_SRP); + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } +} + +static void b_data_pulse_end(void *ptr, unsigned long indicator) +{ + struct ci_hdrc *ci = (struct ci_hdrc *)ptr; + + ci->fsm.b_srp_done = 1; + ci->fsm.b_bus_req = 0; + if (ci->fsm.power_up) + ci->fsm.power_up = 0; + + hw_write_otgsc(ci, OTGSC_HABA, 0); + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); +} + +/* Initialize timers */ +static int ci_otg_init_timers(struct ci_hdrc *ci) +{ + struct otg_fsm *fsm = &ci->fsm; + + /* FSM used timers */ + ci->fsm_timer->timer_list[A_WAIT_VRISE] = + otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_VRISE, + (unsigned long)&fsm->a_wait_vrise_tmout); + if (ci->fsm_timer->timer_list[A_WAIT_VRISE] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[A_WAIT_VFALL] = + otg_timer_initializer(ci, &a_wait_vfall_tmout_func, + TA_WAIT_VFALL, (unsigned long)&fsm->a_wait_vfall_tmout); + if (ci->fsm_timer->timer_list[A_WAIT_VFALL] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[A_WAIT_BCON] = + otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_BCON, + (unsigned long)&fsm->a_wait_bcon_tmout); + if (ci->fsm_timer->timer_list[A_WAIT_BCON] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[A_AIDL_BDIS] = + otg_timer_initializer(ci, &set_tmout_and_fsm, TA_AIDL_BDIS, + (unsigned long)&fsm->a_aidl_bdis_tmout); + if (ci->fsm_timer->timer_list[A_AIDL_BDIS] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[A_BIDL_ADIS] = + otg_timer_initializer(ci, &set_tmout_and_fsm, TA_BIDL_ADIS, + (unsigned long)&fsm->a_bidl_adis_tmout); + if (ci->fsm_timer->timer_list[A_BIDL_ADIS] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[B_ASE0_BRST] = + otg_timer_initializer(ci, &b_ase0_brst_tmout_func, TB_ASE0_BRST, + (unsigned long)&fsm->b_ase0_brst_tmout); + if (ci->fsm_timer->timer_list[B_ASE0_BRST] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[B_SE0_SRP] = + otg_timer_initializer(ci, &set_tmout_and_fsm, TB_SE0_SRP, + (unsigned long)&fsm->b_se0_srp); + if (ci->fsm_timer->timer_list[B_SE0_SRP] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[B_SSEND_SRP] = + otg_timer_initializer(ci, &b_ssend_srp_tmout_func, TB_SSEND_SRP, + (unsigned long)&fsm->b_ssend_srp); + if (ci->fsm_timer->timer_list[B_SSEND_SRP] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[B_SRP_FAIL] = + otg_timer_initializer(ci, &set_tmout, TB_SRP_FAIL, + (unsigned long)&fsm->b_srp_done); + if (ci->fsm_timer->timer_list[B_SRP_FAIL] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[B_DATA_PLS] = + otg_timer_initializer(ci, &b_data_pulse_end, TB_DATA_PLS, 0); + if (ci->fsm_timer->timer_list[B_DATA_PLS] == NULL) + return -ENOMEM; + + ci->fsm_timer->timer_list[B_SESS_VLD] = otg_timer_initializer(ci, + &b_sess_vld_tmout_func, TB_SESS_VLD, 0); + if (ci->fsm_timer->timer_list[B_SESS_VLD] == NULL) + return -ENOMEM; + + return 0; +} + /* -------------------------------------------------------------*/ /* Operations that will be called from OTG Finite State Machine */ /* -------------------------------------------------------------*/ @@ -223,6 +396,7 @@ static struct otg_fsm_ops ci_otg_ops = { int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) { + int retval = 0; struct usb_otg *otg; otg = devm_kzalloc(ci->dev, @@ -244,6 +418,21 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) mutex_init(&ci->fsm.lock); + ci->fsm_timer = devm_kzalloc(ci->dev, + sizeof(struct ci_otg_fsm_timer_list), GFP_KERNEL); + if (!ci->fsm_timer) { + dev_err(ci->dev, + "Failed to allocate timer structure for ci hdrc otg!\n"); + return -ENOMEM; + } + + INIT_LIST_HEAD(&ci->fsm_timer->active_timers); + retval = ci_otg_init_timers(ci); + if (retval) { + dev_err(ci->dev, "Couldn't init OTG timers\n"); + return retval; + } + /* Enable A vbus valid irq */ hw_write_otgsc(ci, OTGSC_AVVIE, OTGSC_AVVIE); diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 4d0dfe6900d6..420f081e7e6a 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -13,6 +13,57 @@ #include +/* + * A-DEVICE timing constants + */ + +/* Wait for VBUS Rise */ +#define TA_WAIT_VRISE (100) /* a_wait_vrise: section 7.1.2 + * a_wait_vrise_tmr: section 7.4.5.1 + * TA_VBUS_RISE <= 100ms, section 4.4 + * Table 4-1: Electrical Characteristics + * ->DC Electrical Timing + */ +/* Wait for VBUS Fall */ +#define TA_WAIT_VFALL (1000) /* a_wait_vfall: section 7.1.7 + * a_wait_vfall_tmr: section: 7.4.5.2 + */ +/* Wait for B-Connect */ +#define TA_WAIT_BCON (10000) /* a_wait_bcon: section 7.1.3 + * TA_WAIT_BCON: should be between 1100 + * and 30000 ms, section 5.5, Table 5-1 + */ +/* A-Idle to B-Disconnect */ +#define TA_AIDL_BDIS (5000) /* a_suspend min 200 ms, section 5.2.1 + * TA_AIDL_BDIS: section 5.5, Table 5-1 + */ +/* B-Idle to A-Disconnect */ +#define TA_BIDL_ADIS (500) /* TA_BIDL_ADIS: section 5.2.1 + * 500ms is used for B switch to host + * for safe + */ + +/* + * B-device timing constants + */ + +/* Data-Line Pulse Time*/ +#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms + * section:5.1.3 + */ +/* SRP Fail Time */ +#define TB_SRP_FAIL (6000) /* b_srp_init,fail time 5~6s + * section:5.1.6 + */ +/* A-SE0 to B-Reset */ +#define TB_ASE0_BRST (155) /* minimum 155 ms, section:5.3.1 */ +/* SE0 Time Before SRP */ +#define TB_SE0_SRP (1000) /* b_idle,minimum 1s, section:5.1.2 */ +/* SSEND time before SRP */ +#define TB_SSEND_SRP (1500) /* minimum 1.5 sec, section:5.1.2 */ + +#define TB_SESS_VLD (1000) + enum ci_otg_fsm_timer_index { /* * CI specific timers, start from the end From 4dcf720c5d40b27c916e7115ad75b335c9c1e264 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:50 +0800 Subject: [PATCH 039/314] usb: chipidea: OTG HNP and SRP fsm implementation USB OTG interrupt handling and fsm transitions according to USB OTG and EH 2.0. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 24 +++- drivers/usb/chipidea/otg.c | 9 +- drivers/usb/chipidea/otg_fsm.c | 243 +++++++++++++++++++++++++++++++++ drivers/usb/chipidea/otg_fsm.h | 18 +++ drivers/usb/chipidea/udc.c | 8 ++ 5 files changed, 294 insertions(+), 8 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 6a6379a8f1f5..128b92ba58a8 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -42,7 +42,6 @@ * - Not Supported: 15 & 16 (ISO) * * TODO List - * - OTG * - Interrupt Traffic * - GET_STATUS(device) - always reports 0 * - Gadget API (majority of optional features) @@ -74,6 +73,7 @@ #include "host.h" #include "debug.h" #include "otg.h" +#include "otg_fsm.h" /* Controller register map */ static const u8 ci_regs_nolpm[] = { @@ -411,8 +411,14 @@ static irqreturn_t ci_irq(int irq, void *data) irqreturn_t ret = IRQ_NONE; u32 otgsc = 0; - if (ci->is_otg) + if (ci->is_otg) { otgsc = hw_read_otgsc(ci, ~0); + if (ci_otg_is_fsm_mode(ci)) { + ret = ci_otg_fsm_irq(ci); + if (ret == IRQ_HANDLED) + return ret; + } + } /* * Handle id change interrupt, it indicates device/host function @@ -691,10 +697,13 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ci->role == CI_ROLE_GADGET) ci_handle_vbus_change(ci); - ret = ci_role_start(ci, ci->role); - if (ret) { - dev_err(dev, "can't start %s role\n", ci_role(ci)->name); - goto stop; + if (!ci_otg_is_fsm_mode(ci)) { + ret = ci_role_start(ci, ci->role); + if (ret) { + dev_err(dev, "can't start %s role\n", + ci_role(ci)->name); + goto stop; + } } platform_set_drvdata(pdev, ci); @@ -703,6 +712,9 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ret) goto stop; + if (ci_otg_is_fsm_mode(ci)) + ci_hdrc_otg_fsm_start(ci); + ret = dbg_create_files(ci); if (!ret) return 0; diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index d76db51ecda7..38e340cba1f9 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -11,8 +11,8 @@ */ /* - * This file mainly handles otgsc register, it may include OTG operation - * in the future. + * This file mainly handles otgsc register, OTG fsm operations for HNP and SRP + * are also included. */ #include @@ -91,6 +91,11 @@ static void ci_otg_work(struct work_struct *work) { struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work); + if (ci_otg_is_fsm_mode(ci) && !ci_otg_fsm_work(ci)) { + enable_irq(ci->irq); + return; + } + if (ci->id_event) { ci->id_event = false; ci_handle_id_switch(ci); diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index bb64fb486eef..67902a16cb74 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -13,6 +13,10 @@ /* * This file mainly handles OTG fsm, it includes OTG fsm operations * for HNP and SRP. + * + * TODO List + * - ADP + * - OTG test device */ #include @@ -93,6 +97,33 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t) hw_write_otgsc(ci, OTGSC_1MSIE, 0); } +/* + * Reduce timer count by 1, and find timeout conditions. + * Called by otg 1ms timer interrupt + */ +static inline int ci_otg_tick_timer(struct ci_hdrc *ci) +{ + struct ci_otg_fsm_timer *tmp_timer, *del_tmp; + struct list_head *active_timers = &ci->fsm_timer->active_timers; + int expired = 0; + + list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) { + tmp_timer->count--; + /* check if timer expires */ + if (!tmp_timer->count) { + list_del(&tmp_timer->list); + tmp_timer->function(ci, tmp_timer->data); + expired = 1; + } + } + + /* disable 1ms irq if there is no any timer active */ + if ((expired == 1) && list_empty(active_timers)) + hw_write_otgsc(ci, OTGSC_1MSIE, 0); + + return expired; +} + /* The timeout callback function to set time out bit */ static void set_tmout(void *ptr, unsigned long indicator) { @@ -394,6 +425,218 @@ static struct otg_fsm_ops ci_otg_ops = { .start_gadget = ci_otg_start_gadget, }; +int ci_otg_fsm_work(struct ci_hdrc *ci) +{ + /* + * Don't do fsm transition for B device + * when there is no gadget class driver + */ + if (ci->fsm.id && !(ci->driver) && + ci->transceiver->state < OTG_STATE_A_IDLE) + return 0; + + if (otg_statemachine(&ci->fsm)) { + if (ci->transceiver->state == OTG_STATE_A_IDLE) { + /* + * Further state change for cases: + * a_idle to b_idle; or + * a_idle to a_wait_vrise due to ID change(1->0), so + * B-dev becomes A-dev can try to start new session + * consequently; or + * a_idle to a_wait_vrise when power up + */ + if ((ci->fsm.id) || (ci->id_event) || + (ci->fsm.power_up)) { + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + if (ci->id_event) + ci->id_event = false; + } else if (ci->transceiver->state == OTG_STATE_B_IDLE) { + if (ci->fsm.b_sess_vld) { + ci->fsm.power_up = 0; + /* + * Further transite to b_periphearl state + * when register gadget driver with vbus on + */ + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + } + } + return 0; +} + +/* + * Update fsm variables in each state if catching expected interrupts, + * called by otg fsm isr. + */ +static void ci_otg_fsm_event(struct ci_hdrc *ci) +{ + u32 intr_sts, otg_bsess_vld, port_conn; + struct otg_fsm *fsm = &ci->fsm; + + intr_sts = hw_read_intr_status(ci); + otg_bsess_vld = hw_read_otgsc(ci, OTGSC_BSV); + port_conn = hw_read(ci, OP_PORTSC, PORTSC_CCS); + + switch (ci->transceiver->state) { + case OTG_STATE_A_WAIT_BCON: + if (port_conn) { + fsm->b_conn = 1; + fsm->a_bus_req = 1; + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + break; + case OTG_STATE_B_IDLE: + if (otg_bsess_vld && (intr_sts & USBi_PCI) && port_conn) { + fsm->b_sess_vld = 1; + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + break; + case OTG_STATE_B_PERIPHERAL: + if ((intr_sts & USBi_SLI) && port_conn && otg_bsess_vld) { + fsm->a_bus_suspend = 1; + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } else if (intr_sts & USBi_PCI) { + if (fsm->a_bus_suspend == 1) + fsm->a_bus_suspend = 0; + } + break; + case OTG_STATE_B_HOST: + if ((intr_sts & USBi_PCI) && !port_conn) { + fsm->a_conn = 0; + fsm->b_bus_req = 0; + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + ci_otg_add_timer(ci, B_SESS_VLD); + } + break; + case OTG_STATE_A_PERIPHERAL: + if (intr_sts & USBi_SLI) { + fsm->b_bus_suspend = 1; + /* + * Init a timer to know how long this suspend + * will contine, if time out, indicates B no longer + * wants to be host role + */ + ci_otg_add_timer(ci, A_BIDL_ADIS); + } + + if (intr_sts & USBi_URI) + ci_otg_del_timer(ci, A_BIDL_ADIS); + + if (intr_sts & USBi_PCI) { + if (fsm->b_bus_suspend == 1) { + ci_otg_del_timer(ci, A_BIDL_ADIS); + fsm->b_bus_suspend = 0; + } + } + break; + case OTG_STATE_A_SUSPEND: + if ((intr_sts & USBi_PCI) && !port_conn) { + fsm->b_conn = 0; + + /* if gadget driver is binded */ + if (ci->driver) { + /* A device to be peripheral mode */ + ci->gadget.is_a_peripheral = 1; + } + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + break; + case OTG_STATE_A_HOST: + if ((intr_sts & USBi_PCI) && !port_conn) { + fsm->b_conn = 0; + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + break; + case OTG_STATE_B_WAIT_ACON: + if ((intr_sts & USBi_PCI) && port_conn) { + fsm->a_conn = 1; + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + } + break; + default: + break; + } +} + +/* + * ci_otg_irq - otg fsm related irq handling + * and also update otg fsm variable by monitoring usb host and udc + * state change interrupts. + * @ci: ci_hdrc + */ +irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci) +{ + irqreturn_t retval = IRQ_NONE; + u32 otgsc, otg_int_src = 0; + struct otg_fsm *fsm = &ci->fsm; + + otgsc = hw_read_otgsc(ci, ~0); + otg_int_src = otgsc & OTGSC_INT_STATUS_BITS & (otgsc >> 8); + fsm->id = (otgsc & OTGSC_ID) ? 1 : 0; + + if (otg_int_src) { + if (otg_int_src & OTGSC_1MSIS) { + hw_write_otgsc(ci, OTGSC_1MSIS, OTGSC_1MSIS); + retval = ci_otg_tick_timer(ci); + return IRQ_HANDLED; + } else if (otg_int_src & OTGSC_DPIS) { + hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); + fsm->a_srp_det = 1; + fsm->a_bus_drop = 0; + } else if (otg_int_src & OTGSC_IDIS) { + hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); + if (fsm->id == 0) { + fsm->a_bus_drop = 0; + fsm->a_bus_req = 1; + ci->id_event = true; + } + } else if (otg_int_src & OTGSC_BSVIS) { + hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); + if (otgsc & OTGSC_BSV) { + fsm->b_sess_vld = 1; + ci_otg_del_timer(ci, B_SSEND_SRP); + ci_otg_del_timer(ci, B_SRP_FAIL); + fsm->b_ssend_srp = 0; + } else { + fsm->b_sess_vld = 0; + if (fsm->id) + ci_otg_add_timer(ci, B_SSEND_SRP); + } + } else if (otg_int_src & OTGSC_AVVIS) { + hw_write_otgsc(ci, OTGSC_AVVIS, OTGSC_AVVIS); + if (otgsc & OTGSC_AVV) { + fsm->a_vbus_vld = 1; + } else { + fsm->a_vbus_vld = 0; + fsm->b_conn = 0; + } + } + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + return IRQ_HANDLED; + } + + ci_otg_fsm_event(ci); + + return retval; +} + +void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci) +{ + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); +} + int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) { int retval = 0; diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 420f081e7e6a..6ec8247d8179 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -92,6 +92,9 @@ struct ci_otg_fsm_timer_list { #ifdef CONFIG_USB_OTG_FSM int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); +int ci_otg_fsm_work(struct ci_hdrc *ci); +irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci); +void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci); #else @@ -100,6 +103,21 @@ static inline int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) return 0; } +static inline int ci_otg_fsm_work(struct ci_hdrc *ci) +{ + return -ENXIO; +} + +static inline irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci) +{ + return IRQ_NONE; +} + +static inline void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci) +{ + +} + #endif #endif /* __DRIVERS_USB_CHIPIDEA_OTG_FSM_H */ diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index cba7fd63d6e3..150592f10b3d 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -28,6 +28,7 @@ #include "bits.h" #include "debug.h" #include "otg.h" +#include "otg_fsm.h" /* control endpoint description */ static const struct usb_endpoint_descriptor @@ -1644,6 +1645,13 @@ static int ci_udc_start(struct usb_gadget *gadget, return retval; ci->driver = driver; + + /* Start otg fsm for B-device */ + if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) { + ci_hdrc_otg_fsm_start(ci); + return retval; + } + pm_runtime_get_sync(&ci->gadget.dev); if (ci->vbus_active) { spin_lock_irqsave(&ci->lock, flags); From 15f75defacd3da412d4c9823d4a9c9f410923766 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:51 +0800 Subject: [PATCH 040/314] usb: chipidea: add sys inputs for OTG fsm input This patch adds sys input to control and show OTG fsm inputs by application, user can do host and preipheral role switch by change these inputs. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/otg.c | 2 + drivers/usb/chipidea/otg_fsm.c | 173 +++++++++++++++++++++++++++++++++ drivers/usb/chipidea/otg_fsm.h | 6 ++ 3 files changed, 181 insertions(+) diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index 38e340cba1f9..a048b08b9d4d 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -141,4 +141,6 @@ void ci_hdrc_otg_destroy(struct ci_hdrc *ci) /* Disable all OTG irq and clear status */ hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, OTGSC_INT_STATUS_BITS); + if (ci_otg_is_fsm_mode(ci)) + ci_hdrc_otg_fsm_remove(ci); } diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 67902a16cb74..8d4c33dea12e 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -46,6 +46,167 @@ static struct ci_otg_fsm_timer *otg_timer_initializer return timer; } +/* Add for otg: interact with user space app */ +static ssize_t +get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) +{ + char *next; + unsigned size, t; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + next = buf; + size = PAGE_SIZE; + t = scnprintf(next, size, "%d\n", ci->fsm.a_bus_req); + size -= t; + next += t; + + return PAGE_SIZE - size; +} + +static ssize_t +set_a_bus_req(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + if (count > 2) + return -1; + + mutex_lock(&ci->fsm.lock); + if (buf[0] == '0') { + ci->fsm.a_bus_req = 0; + } else if (buf[0] == '1') { + /* If a_bus_drop is TRUE, a_bus_req can't be set */ + if (ci->fsm.a_bus_drop) { + mutex_unlock(&ci->fsm.lock); + return count; + } + ci->fsm.a_bus_req = 1; + } + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + mutex_unlock(&ci->fsm.lock); + + return count; +} +static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); + +static ssize_t +get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) +{ + char *next; + unsigned size, t; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + next = buf; + size = PAGE_SIZE; + t = scnprintf(next, size, "%d\n", ci->fsm.a_bus_drop); + size -= t; + next += t; + + return PAGE_SIZE - size; +} + +static ssize_t +set_a_bus_drop(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + if (count > 2) + return -1; + + mutex_lock(&ci->fsm.lock); + if (buf[0] == '0') { + ci->fsm.a_bus_drop = 0; + } else if (buf[0] == '1') { + ci->fsm.a_bus_drop = 1; + ci->fsm.a_bus_req = 0; + } + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + mutex_unlock(&ci->fsm.lock); + + return count; +} +static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, + set_a_bus_drop); + +static ssize_t +get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) +{ + char *next; + unsigned size, t; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + next = buf; + size = PAGE_SIZE; + t = scnprintf(next, size, "%d\n", ci->fsm.b_bus_req); + size -= t; + next += t; + + return PAGE_SIZE - size; +} + +static ssize_t +set_b_bus_req(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + if (count > 2) + return -1; + + mutex_lock(&ci->fsm.lock); + if (buf[0] == '0') + ci->fsm.b_bus_req = 0; + else if (buf[0] == '1') + ci->fsm.b_bus_req = 1; + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + mutex_unlock(&ci->fsm.lock); + + return count; +} +static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); + +static ssize_t +set_a_clr_err(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + + if (count > 2) + return -1; + + mutex_lock(&ci->fsm.lock); + if (buf[0] == '1') + ci->fsm.a_clr_err = 1; + + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); + mutex_unlock(&ci->fsm.lock); + + return count; +} +static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); + +static struct attribute *inputs_attrs[] = { + &dev_attr_a_bus_req.attr, + &dev_attr_a_bus_drop.attr, + &dev_attr_b_bus_req.attr, + &dev_attr_a_clr_err.attr, + NULL, +}; + +static struct attribute_group inputs_attr_group = { + .name = "inputs", + .attrs = inputs_attrs, +}; + /* * Add timer to active timer list */ @@ -676,6 +837,13 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) return retval; } + retval = sysfs_create_group(&ci->dev->kobj, &inputs_attr_group); + if (retval < 0) { + dev_dbg(ci->dev, + "Can't register sysfs attr group: %d\n", retval); + return retval; + } + /* Enable A vbus valid irq */ hw_write_otgsc(ci, OTGSC_AVVIE, OTGSC_AVVIE); @@ -690,3 +858,8 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) return 0; } + +void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci) +{ + sysfs_remove_group(&ci->dev->kobj, &inputs_attr_group); +} diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h index 6ec8247d8179..94c085f456a9 100644 --- a/drivers/usb/chipidea/otg_fsm.h +++ b/drivers/usb/chipidea/otg_fsm.h @@ -95,6 +95,7 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci); int ci_otg_fsm_work(struct ci_hdrc *ci); irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci); void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci); +void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci); #else @@ -118,6 +119,11 @@ static inline void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci) } +static inline void ci_hdrc_otg_fsm_remove(struct ci_hdrc *ci) +{ + +} + #endif #endif /* __DRIVERS_USB_CHIPIDEA_OTG_FSM_H */ From 88bdffc89d84cdb11b6f3373a11ff612c097834e Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:52 +0800 Subject: [PATCH 041/314] usb: chipidea: debug: add debug file for OTG variables This patch adds a debug file for OTG vairables show. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/debug.c | 84 ++++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 5b890c1e69e0..7cccab6ff308 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -7,6 +7,9 @@ #include #include #include +#include +#include +#include #include "ci.h" #include "udc.h" @@ -205,6 +208,80 @@ static const struct file_operations ci_requests_fops = { .release = single_release, }; +int ci_otg_show(struct seq_file *s, void *unused) +{ + struct ci_hdrc *ci = s->private; + struct otg_fsm *fsm; + + if (!ci || !ci_otg_is_fsm_mode(ci)) + return 0; + + fsm = &ci->fsm; + + /* ------ State ----- */ + seq_printf(s, "OTG state: %s\n\n", + usb_otg_state_string(ci->transceiver->state)); + + /* ------ State Machine Variables ----- */ + seq_printf(s, "a_bus_drop: %d\n", fsm->a_bus_drop); + + seq_printf(s, "a_bus_req: %d\n", fsm->a_bus_req); + + seq_printf(s, "a_srp_det: %d\n", fsm->a_srp_det); + + seq_printf(s, "a_vbus_vld: %d\n", fsm->a_vbus_vld); + + seq_printf(s, "b_conn: %d\n", fsm->b_conn); + + seq_printf(s, "adp_change: %d\n", fsm->adp_change); + + seq_printf(s, "power_up: %d\n", fsm->power_up); + + seq_printf(s, "a_bus_resume: %d\n", fsm->a_bus_resume); + + seq_printf(s, "a_bus_suspend: %d\n", fsm->a_bus_suspend); + + seq_printf(s, "a_conn: %d\n", fsm->a_conn); + + seq_printf(s, "b_bus_req: %d\n", fsm->b_bus_req); + + seq_printf(s, "b_bus_suspend: %d\n", fsm->b_bus_suspend); + + seq_printf(s, "b_se0_srp: %d\n", fsm->b_se0_srp); + + seq_printf(s, "b_ssend_srp: %d\n", fsm->b_ssend_srp); + + seq_printf(s, "b_sess_vld: %d\n", fsm->b_sess_vld); + + seq_printf(s, "b_srp_done: %d\n", fsm->b_srp_done); + + seq_printf(s, "drv_vbus: %d\n", fsm->drv_vbus); + + seq_printf(s, "loc_conn: %d\n", fsm->loc_conn); + + seq_printf(s, "loc_sof: %d\n", fsm->loc_sof); + + seq_printf(s, "adp_prb: %d\n", fsm->adp_prb); + + seq_printf(s, "id: %d\n", fsm->id); + + seq_printf(s, "protocol: %d\n", fsm->protocol); + + return 0; +} + +static int ci_otg_open(struct inode *inode, struct file *file) +{ + return single_open(file, ci_otg_show, inode->i_private); +} + +static const struct file_operations ci_otg_fops = { + .open = ci_otg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int ci_role_show(struct seq_file *s, void *data) { struct ci_hdrc *ci = s->private; @@ -332,6 +409,13 @@ int dbg_create_files(struct ci_hdrc *ci) if (!dent) goto err; + if (ci_otg_is_fsm_mode(ci)) { + dent = debugfs_create_file("otg", S_IRUGO, ci->debugfs, ci, + &ci_otg_fops); + if (!dent) + goto err; + } + dent = debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, &ci_role_fops); if (!dent) From f99858e0892f8bcb6540122d3b3c349cbacc75ac Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:53 +0800 Subject: [PATCH 042/314] Documentation: ABI: usb: sysfs Description for chipidea USB OTG HNP and SRP This patch adds sysfs interface description for chipidea USB OTG HNP and SRP. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- .../testing/sysfs-platform-chipidea-usb-otg | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg diff --git a/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg b/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg new file mode 100644 index 000000000000..151c59578db4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg @@ -0,0 +1,56 @@ +What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req +Date: Feb 2014 +Contact: Li Jun +Description: + Can be set and read. + Set a_bus_req(A-device bus request) input to be 1 if + the application running on the A-device wants to use the bus, + and to be 0 when the application no longer wants to use + the bus(or wants to work as peripheral). a_bus_req can also + be set to 1 by kernel in response to remote wakeup signaling + from the B-device, the A-device should decide to resume the bus. + + Valid values are "1" and "0". + + Reading: returns 1 if the application running on the A-device + is using the bus as host role, otherwise 0. + +What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop +Date: Feb 2014 +Contact: Li Jun +Description: + Can be set and read + The a_bus_drop(A-device bus drop) input is 1 when the + application running on the A-device wants to power down + the bus, and is 0 otherwise, When a_bus_drop is 1, then + the a_bus_req shall be 0. + + Valid values are "1" and "0". + + Reading: returns 1 if the bus is off(vbus is turned off) by + A-device, otherwise 0. + +What: /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req +Date: Feb 2014 +Contact: Li Jun +Description: + Can be set and read. + The b_bus_req(B-device bus request) input is 1 during the time + that the application running on the B-device wants to use the + bus as host, and is 0 when the application no longer wants to + work as host and decides to switch back to be peripheral. + + Valid values are "1" and "0". + + Reading: returns if the application running on the B device + is using the bus as host role, otherwise 0. + +What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err +Date: Feb 2014 +Contact: Li Jun +Description: + Only can be set. + The a_clr_err(A-device Vbus error clear) input is used to clear + vbus error, then A-device will power down the bus. + + Valid value is "1" From 9159e049c072bb4f77ac65a7c0fb05953b10fc21 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 23 Apr 2014 15:56:54 +0800 Subject: [PATCH 043/314] Documentation: usb: add chipidea.txt for how to demo usb OTG HNP and SRP This patch adds a file chipidea.txt for how to demo chipidea usb OTG HNP and SRP functions via sysfs input files, any other possible information should be documented for chipidea usb driver in future can be added into this file. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/chipidea.txt | 71 ++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 Documentation/usb/chipidea.txt diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt new file mode 100644 index 000000000000..4c0e2eaa5b29 --- /dev/null +++ b/Documentation/usb/chipidea.txt @@ -0,0 +1,71 @@ +1. How to test OTG FSM(HNP and SRP) +----------------------------------- +To show how to demo OTG HNP and SRP functions via sys input files +with 2 Freescale i.MX6Q sabre SD boards. + +1.1 How to enable OTG FSM in menuconfig +--------------------------------------- +Select CONFIG_USB_OTG_FSM. +If you want to check some internal variables for otg fsm, +select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which +can show otg fsm variables and some controller registers value: +cat /sys/kernel/debug/ci_hdrc.0/otg +cat /sys/kernel/debug/ci_hdrc.0/registers + +1.2 Test operations +------------------- +1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded + (e.g. g_mass_storage). + +2) Connect 2 boards with usb cable with one end is micro A plug, the other end + is micro B plug. + + The A-device(with micro A plug inserted) should enumrate B-device. + +3) Role switch + On B-device: + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + + if HNP polling is not supported, also need: + On A-device: + echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req + + B-device should take host role and enumrate A-device. + +4) A-device switch back to host. + On B-device: + echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + + A-device should switch back to host and enumrate B-device. + +5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, + A-device should enumrate B-device again. + +6) Remove B-device(unplug micro B plug) and insert again after 10 seconds, + A-device should NOT enumrate B-device. + + if A-device wants to use bus: + On A-device: + echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req + + if B-device wants to use bus: + On B-device: + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + +7) A-device power down the bus. + On A-device: + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop + + A-device should disconnect with B-device and power down the bus. + +8) B-device does data pulse for SRP. + On B-device: + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + + A-device should resume usb bus and enumrate B-device. + +1.3 Reference document +---------------------- +"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification +July 27, 2012 Revision 2.0 version 1.1a" From 0021a75a475b6c1e500ae4bdcc1ff19f7794aa95 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 8 Apr 2014 20:10:35 +0530 Subject: [PATCH 044/314] usb: ohci-exynos: Remove locks for 'ohci' in suspend callback Patch : 14982e3 USB: OHCI: Properly handle ohci-exynos suspend has already removed 'ohci_hcd' settings from exynos glue layer as a part of streamlining the ohci controller's suspend. So we don't need the locks for 'ohci_hcd' anymore. Signed-off-by: Vivek Gautam Cc: Manjunath Goudar Cc: Alan Stern Acked-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-exynos.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 68588d8a09bb..9cf80cb7c051 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -190,17 +190,13 @@ static int exynos_ohci_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); struct platform_device *pdev = to_platform_device(dev); bool do_wakeup = device_may_wakeup(dev); - unsigned long flags; int rc = ohci_suspend(hcd, do_wakeup); if (rc) return rc; - spin_lock_irqsave(&ohci->lock, flags); - if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); @@ -208,8 +204,6 @@ static int exynos_ohci_suspend(struct device *dev) clk_disable_unprepare(exynos_ohci->clk); - spin_unlock_irqrestore(&ohci->lock, flags); - return 0; } From 42b59eba718a145e991ae02437f38d8aa8efe207 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Apr 2014 18:00:09 +0200 Subject: [PATCH 045/314] USB: OHCI: Export the OHCI hub control and status_data functions Platform drivers sometimes need to perform specific handling of hub control requests and status data. Make this possible by exporting the ohci_hub_control() and ohci_hub_status_data() functions which can then be called from custom hub operations in the default case. Signed-off-by: Laurent Pinchart Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-at91.c | 11 ++--------- drivers/usb/host/ohci-hub.c | 8 ++++---- drivers/usb/host/ohci-s3c2410.c | 13 +++---------- drivers/usb/host/ohci.h | 3 +++ 4 files changed, 12 insertions(+), 23 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 091ae4905cfc..e49eb4f90f5d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -46,9 +46,6 @@ static const char hcd_name[] = "ohci-atmel"; static struct hc_driver __read_mostly ohci_at91_hc_driver; static int clocked; -static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, - u16 wValue, u16 wIndex, char *buf, u16 wLength); -static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); extern int usb_disabled(void); @@ -262,7 +259,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) { struct at91_usbh_data *pdata = hcd->self.controller->platform_data; - int length = orig_ohci_hub_status_data(hcd, buf); + int length = ohci_hub_status_data(hcd, buf); int port; at91_for_each_port(port) { @@ -340,8 +337,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; } - ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, - buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); if (ret) goto out; @@ -690,9 +686,6 @@ static int __init ohci_at91_init(void) * too easy. */ - orig_ohci_hub_control = ohci_at91_hc_driver.hub_control; - orig_ohci_hub_status_data = ohci_at91_hc_driver.hub_status_data; - ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data; ohci_at91_hc_driver.hub_control = ohci_at91_hub_control; diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index c81c8721cc5a..3d53208278b3 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -438,8 +438,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, /* build "status change" packet (one or two bytes) from HC registers */ -static int -ohci_hub_status_data (struct usb_hcd *hcd, char *buf) +int ohci_hub_status_data(struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int i, changed = 0, length = 1; @@ -504,6 +503,7 @@ done: return changed ? length : 0; } +EXPORT_SYMBOL_GPL(ohci_hub_status_data); /*-------------------------------------------------------------------------*/ @@ -646,7 +646,7 @@ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) return 0; } -static int ohci_hub_control ( +int ohci_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, @@ -772,4 +772,4 @@ error: } return retval; } - +EXPORT_SYMBOL_GPL(ohci_hub_control); diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index ff7c8f1c48fb..3d753a9d3141 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -45,10 +45,6 @@ static struct clk *usb_clk; /* forward definitions */ -static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, - u16 wValue, u16 wIndex, char *buf, u16 wLength); -static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); - static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); /* conversion functions */ @@ -110,7 +106,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) int orig; int portno; - orig = orig_ohci_hub_status_data(hcd, buf); + orig = ohci_hub_status_data(hcd, buf); if (info == NULL) return orig; @@ -181,7 +177,7 @@ static int ohci_s3c2410_hub_control( * process the request straight away and exit */ if (info == NULL) { - ret = orig_ohci_hub_control(hcd, typeReq, wValue, + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); goto out; } @@ -231,7 +227,7 @@ static int ohci_s3c2410_hub_control( break; } - ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); if (ret) goto out; @@ -489,9 +485,6 @@ static int __init ohci_s3c2410_init(void) * override these functions by making it too easy. */ - orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; - orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data; - ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 9250cada13f0..a11658373209 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -727,3 +727,6 @@ extern int ohci_setup(struct usb_hcd *hcd); extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ohci_resume(struct usb_hcd *hcd, bool hibernated); #endif +extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); +extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf); From 37769939082ae0749405133e09eac2c3ccb8fcf0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Apr 2014 18:00:10 +0200 Subject: [PATCH 046/314] USB: EHCI: Export the ehci_hub_control function Platform drivers sometimes need to perform specific handling of hub control requests. Make this possible by exporting the ehci_hub_control() function which can then be called from a custom hub control handler in the default case. Signed-off-by: Laurent Pinchart Acked-by: Alan Stern Acked-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 12 ++---------- drivers/usb/host/ehci-tegra.c | 8 +------- drivers/usb/host/ehci.h | 3 +++ 3 files changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 7ae0c4d51741..cc305c71ac3d 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -33,15 +33,6 @@ #ifdef CONFIG_PM -static int ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -); - static int persist_enabled_on_companion(struct usb_device *udev, void *unused) { return !udev->maxchild && udev->persist_enabled && @@ -865,7 +856,7 @@ cleanup: #endif /* CONFIG_USB_HCD_TEST_MODE */ /*-------------------------------------------------------------------------*/ -static int ehci_hub_control ( +int ehci_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, @@ -1285,6 +1276,7 @@ error_exit: spin_unlock_irqrestore (&ehci->lock, flags); return retval; } +EXPORT_SYMBOL_GPL(ehci_hub_control); static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 7ef00ecb0da1..572634cd95d6 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -51,10 +51,6 @@ struct tegra_ehci_soc_config { bool has_hostpc; }; -static int (*orig_hub_control)(struct usb_hcd *hcd, - u16 typeReq, u16 wValue, u16 wIndex, - char *buf, u16 wLength); - struct tegra_ehci_hcd { struct tegra_usb_phy *phy; struct clk *clk; @@ -236,7 +232,7 @@ static int tegra_ehci_hub_control( spin_unlock_irqrestore(&ehci->lock, flags); /* Handle the hub control events here */ - return orig_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); done: spin_unlock_irqrestore(&ehci->lock, flags); @@ -554,8 +550,6 @@ static int __init ehci_tegra_init(void) * too easy. */ - orig_hub_control = tegra_ehci_hc_driver.hub_control; - tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma; tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma; tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 9dfc6c1394d6..eee228a26a0e 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -872,4 +872,7 @@ extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ehci_resume(struct usb_hcd *hcd, bool hibernated); #endif /* CONFIG_PM */ +extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + #endif /* __LINUX_EHCI_HCD_H */ From cecabe5c349b613614fbbf822e3aeb33758a22f0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Apr 2014 18:00:11 +0200 Subject: [PATCH 047/314] USB: ohci-pxa27x: Add support for external vbus regulators Override the hub control operation to enable and disable external regulators for the ports vbus power supply in response to clear/set USB_PORT_FEAT_POWER requests. Signed-off-by: Laurent Pinchart Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pxa27x.c | 68 ++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index d21d5fefa76c..e68f3d02cd1a 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -120,6 +121,8 @@ static struct hc_driver __read_mostly ohci_pxa27x_hc_driver; struct pxa27x_ohci { struct clk *clk; void __iomem *mmio_base; + struct regulator *vbus[3]; + bool vbus_enabled[3]; }; #define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv) @@ -166,6 +169,52 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode) return 0; } +static int pxa27x_ohci_set_vbus_power(struct pxa27x_ohci *pxa_ohci, + unsigned int port, bool enable) +{ + struct regulator *vbus = pxa_ohci->vbus[port]; + int ret = 0; + + if (IS_ERR_OR_NULL(vbus)) + return 0; + + if (enable && !pxa_ohci->vbus_enabled[port]) + ret = regulator_enable(vbus); + else if (!enable && pxa_ohci->vbus_enabled[port]) + ret = regulator_disable(vbus); + + if (ret < 0) + return ret; + + pxa_ohci->vbus_enabled[port] = enable; + + return 0; +} + +static int pxa27x_ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); + int ret; + + switch (typeReq) { + case SetPortFeature: + case ClearPortFeature: + if (!wIndex || wIndex > 3) + return -EPIPE; + + if (wValue != USB_PORT_FEAT_POWER) + break; + + ret = pxa27x_ohci_set_vbus_power(pxa_ohci, wIndex - 1, + typeReq == SetPortFeature); + if (ret) + return ret; + break; + } + + return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +} /*-------------------------------------------------------------------------*/ static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci, @@ -372,6 +421,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device struct ohci_hcd *ohci; struct resource *r; struct clk *usb_clk; + unsigned int i; retval = ohci_pxa_of_init(pdev); if (retval) @@ -417,6 +467,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device pxa_ohci->clk = usb_clk; pxa_ohci->mmio_base = (void __iomem *)hcd->regs; + for (i = 0; i < 3; ++i) { + char name[6]; + + if (!(inf->flags & (ENABLE_PORT1 << i))) + continue; + + sprintf(name, "vbus%u", i + 1); + pxa_ohci->vbus[i] = devm_regulator_get(&pdev->dev, name); + } + retval = pxa27x_start_hc(pxa_ohci, &pdev->dev); if (retval < 0) { pr_debug("pxa27x_start_hc failed"); @@ -462,9 +522,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); + unsigned int i; usb_remove_hcd(hcd); pxa27x_stop_hc(pxa_ohci, &pdev->dev); + + for (i = 0; i < 3; ++i) + pxa27x_ohci_set_vbus_power(pxa_ohci, i, false); + usb_put_hcd(hcd); } @@ -563,7 +628,10 @@ static int __init ohci_pxa27x_init(void) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides); + ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control; + return platform_driver_register(&ohci_hcd_pxa27x_driver); } module_init(ohci_pxa27x_init); From 541e00ae0c1e1fd1e9e2bf2cf010c26d0a1ed0a0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Apr 2014 18:00:12 +0200 Subject: [PATCH 048/314] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-pxa/zeus.c | 89 ++++++++++++++++++++++------------------ 1 file changed, 48 insertions(+), 41 deletions(-) diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b19d1c361cab..205f9bf3821e 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -413,7 +413,7 @@ static struct fixed_voltage_config can_regulator_pdata = { static struct platform_device can_regulator_device = { .name = "reg-fixed-volage", - .id = -1, + .id = 0, .dev = { .platform_data = &can_regulator_pdata, }, @@ -510,18 +510,6 @@ struct platform_device zeus_max6369_device = { .num_resources = 1, }; -static struct platform_device *zeus_devices[] __initdata = { - &zeus_serial_device, - &zeus_mtd_devices[0], - &zeus_dm9k0_device, - &zeus_dm9k1_device, - &zeus_sram_device, - &zeus_leds_device, - &zeus_pcmcia_device, - &zeus_max6369_device, - &can_regulator_device, -}; - /* AC'97 */ static pxa2xx_audio_ops_t zeus_ac97_info = { .reset_gpio = 95, @@ -532,44 +520,50 @@ static pxa2xx_audio_ops_t zeus_ac97_info = { * USB host */ -static int zeus_ohci_init(struct device *dev) -{ - int err; +static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = { + REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"), +}; - /* Switch on port 2. */ - if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) { - dev_err(dev, "Can't request USB2_PWREN\n"); - return err; - } +static struct regulator_init_data zeus_ohci_regulator_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(zeus_ohci_regulator_supplies), + .consumer_supplies = zeus_ohci_regulator_supplies, +}; - if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) { - gpio_free(ZEUS_USB2_PWREN_GPIO); - dev_err(dev, "Can't enable USB2_PWREN\n"); - return err; - } +static struct fixed_voltage_config zeus_ohci_regulator_config = { + .supply_name = "vbus2", + .microvolts = 5000000, /* 5.0V */ + .gpio = ZEUS_USB2_PWREN_GPIO, + .enable_high = 1, + .startup_delay = 0, + .init_data = &zeus_ohci_regulator_data, +}; - /* Port 2 is shared between host and client interface. */ - UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; - - return 0; -} - -static void zeus_ohci_exit(struct device *dev) -{ - /* Power-off port 2 */ - gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0); - gpio_free(ZEUS_USB2_PWREN_GPIO); -} +static struct platform_device zeus_ohci_regulator_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &zeus_ohci_regulator_config, + }, +}; static struct pxaohci_platform_data zeus_ohci_platform_data = { .port_mode = PMM_NPS_MODE, /* Clear Power Control Polarity Low and set Power Sense * Polarity Low. Supply power to USB ports. */ .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW, - .init = zeus_ohci_init, - .exit = zeus_ohci_exit, }; +static void zeus_register_ohci(void) +{ + /* Port 2 is shared between host and client interface. */ + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + pxa_set_ohci_info(&zeus_ohci_platform_data); +} + /* * Flat Panel */ @@ -677,6 +671,19 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { .udc_command = zeus_udc_command, }; +static struct platform_device *zeus_devices[] __initdata = { + &zeus_serial_device, + &zeus_mtd_devices[0], + &zeus_dm9k0_device, + &zeus_dm9k1_device, + &zeus_sram_device, + &zeus_leds_device, + &zeus_pcmcia_device, + &zeus_max6369_device, + &can_regulator_device, + &zeus_ohci_regulator_device, +}; + #ifdef CONFIG_PM static void zeus_power_off(void) { @@ -847,7 +854,7 @@ static void __init zeus_init(void) platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); - pxa_set_ohci_info(&zeus_ohci_platform_data); + zeus_register_ohci(); if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); From 543cab6402794e9cb444779d73e8097b8f29f7ee Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 15 Apr 2014 13:36:23 +0200 Subject: [PATCH 049/314] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d The usb phy driver for mv_u3d got added in v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended on CPU_MMP3 at that time. But CPU_MMP3 has never been part of the tree. This means that this drive was unbuildable when it was added. In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency") MV_U3D_PHY was made depended directly on CPU_MMP3. That kept it unbuildable, of course. Remove this driver. It can be re-added once its dependencies are part of the tree. Signed-off-by: Paul Bolle Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/Kconfig | 8 - drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-mv-u3d-usb.c | 338 ------------------------------- drivers/usb/phy/phy-mv-u3d-usb.h | 105 ---------- 4 files changed, 452 deletions(-) delete mode 100644 drivers/usb/phy/phy-mv-u3d-usb.c delete mode 100644 drivers/usb/phy/phy-mv-u3d-usb.h diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 416e0c8cf6ff..33dd6a6c320a 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -59,14 +59,6 @@ config KEYSTONE_USB_PHY interface to interact with USB 2.0 and USB 3.0 PHY that is part of the Keystone SOC. -config MV_U3D_PHY - bool "Marvell USB 3.0 PHY controller Driver" - depends on CPU_MMP3 - select USB_PHY - help - Enable this to support Marvell USB 3.0 phy controller for Marvell - SoC. - config NOP_USB_XCEIV tristate "NOP USB Transceiver Driver" select USB_PHY diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index f8fa719a31b9..a2d05690d925 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_USB_OTG_FSM) += phy-fsm-usb.o obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb.o obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o -obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c deleted file mode 100644 index d317903022bf..000000000000 --- a/drivers/usb/phy/phy-mv-u3d-usb.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "phy-mv-u3d-usb.h" - -/* - * struct mv_u3d_phy - transceiver driver state - * @phy: transceiver structure - * @dev: The parent device supplied to the probe function - * @clk: usb phy clock - * @base: usb phy register memory base - */ -struct mv_u3d_phy { - struct usb_phy phy; - struct mv_usb_platform_data *plat; - struct device *dev; - struct clk *clk; - void __iomem *base; -}; - -static u32 mv_u3d_phy_read(void __iomem *base, u32 reg) -{ - void __iomem *addr, *data; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - return readl_relaxed(data); -} - -static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) -{ - void __iomem *addr, *data; - u32 tmp; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - tmp = readl_relaxed(data); - tmp |= value; - writel_relaxed(tmp, data); -} - -static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) -{ - void __iomem *addr, *data; - u32 tmp; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - tmp = readl_relaxed(data); - tmp &= ~value; - writel_relaxed(tmp, data); -} - -static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) -{ - void __iomem *addr, *data; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - writel_relaxed(value, data); -} - -static void mv_u3d_phy_shutdown(struct usb_phy *phy) -{ - struct mv_u3d_phy *mv_u3d_phy; - void __iomem *base; - u32 val; - - mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); - base = mv_u3d_phy->base; - - /* Power down Reference Analog current, bit 15 - * Power down PLL, bit 14 - * Power down Receiver, bit 13 - * Power down Transmitter, bit 12 - * of USB3_POWER_PLL_CONTROL register - */ - val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); - val &= ~(USB3_POWER_PLL_CONTROL_PU); - mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); - - if (mv_u3d_phy->clk) - clk_disable(mv_u3d_phy->clk); -} - -static int mv_u3d_phy_init(struct usb_phy *phy) -{ - struct mv_u3d_phy *mv_u3d_phy; - void __iomem *base; - u32 val, count; - - /* enable usb3 phy */ - mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); - - if (mv_u3d_phy->clk) - clk_enable(mv_u3d_phy->clk); - - base = mv_u3d_phy->base; - - val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); - val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK); - val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT; - mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); - udelay(100); - - mv_u3d_phy_write(base, USB3_RESET_CONTROL, - USB3_RESET_CONTROL_RESET_PIPE); - udelay(100); - - mv_u3d_phy_write(base, USB3_RESET_CONTROL, - USB3_RESET_CONTROL_RESET_PIPE - | USB3_RESET_CONTROL_RESET_PHY); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); - val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK - | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK); - val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT) - | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT); - mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); - udelay(100); - - mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL, - USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE); - val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK - | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK - | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK); - val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT) - | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT) - | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT)); - mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_GEN1_SET0); - val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK; - val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT; - mv_u3d_phy_write(base, USB3_GEN1_SET0, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_GEN2_SET0); - val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK - | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK - | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK); - val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT) - | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT) - | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT) - | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT)); - mv_u3d_phy_write(base, USB3_GEN2_SET0, val); - udelay(100); - - mv_u3d_phy_read(base, USB3_TX_EMPPH); - val &= ~(USB3_TX_EMPPH_AMP_MASK - | USB3_TX_EMPPH_EN_MASK - | USB3_TX_EMPPH_AMP_FORCE_MASK - | USB3_TX_EMPPH_PAR1_MASK - | USB3_TX_EMPPH_PAR2_MASK); - val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT) - | (1 << USB3_TX_EMPPH_EN_SHIFT) - | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT) - | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT) - | (1 << USB3_TX_EMPPH_PAR2_SHIFT)); - - mv_u3d_phy_write(base, USB3_TX_EMPPH, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_GEN2_SET1); - val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK - | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK - | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK - | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK); - val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT) - | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT) - | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT) - | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT)); - mv_u3d_phy_write(base, USB3_GEN2_SET1, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN); - val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK; - val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT; - mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC); - val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK; - val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT; - mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL); - val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK; - val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT; - mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE); - val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK - | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK - | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK); - val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT) - | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT)); - mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_TXDETRX); - val &= ~(USB3_TXDETRX_VTHSEL_MASK); - val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT; - mv_u3d_phy_write(base, USB3_TXDETRX, val); - udelay(100); - - dev_dbg(mv_u3d_phy->dev, "start calibration\n"); - -calstart: - /* Perform Manual Calibration */ - mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL, - 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT); - - mdelay(1); - - count = 0; - while (1) { - val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL); - if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT)) - break; - else if (count > 50) { - dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n"); - goto calstart; - } - count++; - mdelay(1); - } - - /* active PIPE interface */ - mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL, - 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE); - - return 0; -} - -static int mv_u3d_phy_probe(struct platform_device *pdev) -{ - struct mv_u3d_phy *mv_u3d_phy; - struct mv_usb_platform_data *pdata; - struct device *dev = &pdev->dev; - struct resource *res; - void __iomem *phy_base; - int ret; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - phy_base = devm_ioremap_resource(dev, res); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL); - if (!mv_u3d_phy) - return -ENOMEM; - - mv_u3d_phy->dev = &pdev->dev; - mv_u3d_phy->plat = pdata; - mv_u3d_phy->base = phy_base; - mv_u3d_phy->phy.dev = mv_u3d_phy->dev; - mv_u3d_phy->phy.label = "mv-u3d-phy"; - mv_u3d_phy->phy.init = mv_u3d_phy_init; - mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown; - - ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3); - if (ret) - goto err; - - if (!mv_u3d_phy->clk) - mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy"); - - platform_set_drvdata(pdev, mv_u3d_phy); - - dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n"); -err: - return ret; -} - -static int mv_u3d_phy_remove(struct platform_device *pdev) -{ - struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev); - - usb_remove_phy(&mv_u3d_phy->phy); - - if (mv_u3d_phy->clk) { - clk_put(mv_u3d_phy->clk); - mv_u3d_phy->clk = NULL; - } - - return 0; -} - -static struct platform_driver mv_u3d_phy_driver = { - .probe = mv_u3d_phy_probe, - .remove = mv_u3d_phy_remove, - .driver = { - .name = "mv-u3d-phy", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(mv_u3d_phy_driver); -MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller"); -MODULE_AUTHOR("Yu Xu "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mv-u3d-phy"); diff --git a/drivers/usb/phy/phy-mv-u3d-usb.h b/drivers/usb/phy/phy-mv-u3d-usb.h deleted file mode 100644 index 2a658cb9a527..000000000000 --- a/drivers/usb/phy/phy-mv-u3d-usb.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - -#ifndef __MV_U3D_PHY_H -#define __MV_U3D_PHY_H - -#define USB3_POWER_PLL_CONTROL 0x1 -#define USB3_KVCO_CALI_CONTROL 0x2 -#define USB3_IMPEDANCE_CALI_CTRL 0x3 -#define USB3_IMPEDANCE_TX_SSC 0x4 -#define USB3_SQUELCH_FFE 0x6 -#define USB3_GEN1_SET0 0xD -#define USB3_GEN2_SET0 0xF -#define USB3_GEN2_SET1 0x10 -#define USB3_DIGITAL_LOOPBACK_EN 0x23 -#define USB3_PHY_ISOLATION_MODE 0x26 -#define USB3_TXDETRX 0x48 -#define USB3_TX_EMPPH 0x5E -#define USB3_RESET_CONTROL 0x90 -#define USB3_PIPE_SM_CTRL 0x91 - -#define USB3_RESET_CONTROL_RESET_PIPE 0x1 -#define USB3_RESET_CONTROL_RESET_PHY 0x2 - -#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0) -#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0 -#define USB3_PLL_25MHZ 0x2 -#define USB3_PLL_26MHZ 0x5 -#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5) -#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5 -#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12) -#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12 -#define USB3_POWER_PLL_CONTROL_PU (0xF << 12) - -#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12) -#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12 -#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14 -#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15 - -#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF -#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0 -#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4) -#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4 -#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8) -#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8 - -#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15) -#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11 - -#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1) -#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1 -#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6 -#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7) -#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7 -#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11) -#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11 -#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15) -#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15 - -#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0) -#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0 -#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3) -#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3 -#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6) -#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6 -#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8) -#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8 - -#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10) -#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10 - -#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12) -#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12 - -#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0) -#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0 - -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0 -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4) -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4 -#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8) - -#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4) -#define USB3_TXDETRX_VTHSEL_SHIFT 4 - -#define USB3_TX_EMPPH_AMP_MASK (0xF << 0) -#define USB3_TX_EMPPH_AMP_SHIFT 0 -#define USB3_TX_EMPPH_EN_MASK (0x1 << 6) -#define USB3_TX_EMPPH_EN_SHIFT 6 -#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7) -#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7 -#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8) -#define USB3_TX_EMPPH_PAR1_SHIFT 8 -#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13) -#define USB3_TX_EMPPH_PAR2_SHIFT 13 - -#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15 - -#endif /* __MV_U3D_PHY_H */ From 6ab53324496dbfd9e6110539f9aa0ab108bd664b Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 14 Apr 2014 14:13:33 -0700 Subject: [PATCH 050/314] usb: dwc2: add defines to support s3c-hsotg driver In preparation of combining the dwc2/s3c-hsotg driver in a single DRD driver, the defines in dwc2/hw.h needs to get updated so that the s3c-hsotg driver can use them. Signed-off-by: Dinh Nguyen [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han Tested-by: Robert Baldyga [ pz - Tested host part only. ] Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hw.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 9c92a3c7588a..51248b935493 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -109,6 +109,7 @@ #define GUSBCFG_FSINTF (1 << 5) #define GUSBCFG_ULPI_UTMI_SEL (1 << 4) #define GUSBCFG_PHYIF16 (1 << 3) +#define GUSBCFG_PHYIF8 (0 << 3) #define GUSBCFG_TOUTCAL_MASK (0x7 << 0) #define GUSBCFG_TOUTCAL_SHIFT 0 #define GUSBCFG_TOUTCAL_LIMIT 0x7 @@ -403,6 +404,7 @@ #define FIFOSIZE_DEPTH_SHIFT 16 #define FIFOSIZE_STARTADDR_MASK (0xffff << 0) #define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) /* Device mode registers */ @@ -519,11 +521,11 @@ #define DXEPCTL_STALL (1 << 21) #define DXEPCTL_SNP (1 << 20) #define DXEPCTL_EPTYPE_MASK (0x3 << 18) -#define DXEPCTL_EPTYPE_SHIFT 18 -#define DXEPCTL_EPTYPE_CONTROL 0 -#define DXEPCTL_EPTYPE_ISO 1 -#define DXEPCTL_EPTYPE_BULK 2 -#define DXEPCTL_EPTYPE_INTTERUPT 3 +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + #define DXEPCTL_NAKSTS (1 << 17) #define DXEPCTL_DPID (1 << 16) #define DXEPCTL_EOFRNUM (1 << 16) From 47a1685f139271de401212bd69d17374ca5a5270 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 14 Apr 2014 14:13:34 -0700 Subject: [PATCH 051/314] usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory Moves the s3c-hsotg driver into the dwc2 directory and uses the dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c. NOTE: You can build both host and peripheral as a dynamically linked module, but be aware that if you insmod dwc2_gadget, then rmmod it, then insmod dwc2 and dwc2_platform for host mode, this will not work. As the step to rmmod dwc2_gadget.ko will turn off the clock to the USB IP. The dwc2 host driver currently does not look to turn on a clock yet. A patch to fix that will be coming soon. Signed-off-by: Dinh Nguyen [ jh,rb - For gadget part only: ] Tested-by: Jingoo Han Tested-by: Robert Baldyga [ pz: Folded Kconfig/Makefile changes, which were originally in a separate patch, into this one, to avoid a build breakage. Modified Kconfig/Makefile changes a bit. Tested host part only. ] Signed-off-by: Paul Zimmerman Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/Kconfig | 61 ++- drivers/usb/dwc2/Makefile | 39 +- .../usb/{gadget/s3c-hsotg.c => dwc2/gadget.c} | 415 +++++++++--------- drivers/usb/gadget/Kconfig | 6 - drivers/usb/gadget/Makefile | 1 - drivers/usb/gadget/s3c-hsotg.h | 378 ---------------- 6 files changed, 274 insertions(+), 626 deletions(-) rename drivers/usb/{gadget/s3c-hsotg.c => dwc2/gadget.c} (91%) delete mode 100644 drivers/usb/gadget/s3c-hsotg.h diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index be947d673844..f93807b3631a 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -1,25 +1,58 @@ config USB_DWC2 - tristate "DesignWare USB2 DRD Core Support" + bool "DesignWare USB2 DRD Core Support" depends on USB help - Say Y or M here if your system has a Dual Role HighSpeed - USB controller based on the DesignWare HSOTG IP Core. + Say Y here if your system has a Dual Role Hi-Speed USB + controller based on the DesignWare HSOTG IP Core. - If you choose to build this driver as dynamically linked - modules, the core module will be called dwc2.ko, the - PCI bus interface module (if you have a PCI bus system) - will be called dwc2_pci.ko and the platform interface module - (for controllers directly connected to the CPU) will be called - dwc2_platform.ko. + For host mode, if you choose to build the driver as dynamically + linked modules, the core module will be called dwc2.ko, the PCI + bus interface module (if you have a PCI bus system) will be + called dwc2_pci.ko, and the platform interface module (for + controllers directly connected to the CPU) will be called + dwc2_platform.ko. For gadget mode, there will be a single + module called dwc2_gadget.ko. - NOTE: This driver at present only implements the Host mode - of the controller. The existing s3c-hsotg driver supports - Peripheral mode, but only for the Samsung S3C platforms. - There are plans to merge the s3c-hsotg driver with this - driver in the near future to create a dual-role driver. + NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The + host and gadget drivers are still currently separate drivers. + There are plans to merge the dwc2_gadget driver with the dwc2 + host driver in the near future to create a dual-role driver. if USB_DWC2 +config USB_DWC2_HOST + tristate "Host only mode" + depends on USB + help + The Designware USB2.0 high-speed host controller + integrated into many SoCs. + +config USB_DWC2_PLATFORM + bool "DWC2 Platform" + depends on USB_DWC2_HOST + default USB_DWC2_HOST + help + The Designware USB2.0 platform interface module for + controllers directly connected to the CPU. This is only + used for host mode. + +config USB_DWC2_PCI + bool "DWC2 PCI" + depends on USB_DWC2_HOST && PCI + default USB_DWC2_HOST + help + The Designware USB2.0 PCI interface module for controllers + connected to a PCI bus. This is only used for host mode. + +comment "Gadget mode requires USB Gadget support to be enabled" + +config USB_DWC2_PERIPHERAL + tristate "Gadget only mode" + depends on USB_GADGET + help + The Designware USB2.0 high-speed gadget controller + integrated into many SoCs. + config USB_DWC2_DEBUG bool "Enable Debugging Messages" help diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index 11529d3439b0..b73d2a527970 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -1,25 +1,28 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG -obj-$(CONFIG_USB_DWC2) += dwc2.o - -dwc2-y += core.o core_intr.o - -# NOTE: This driver at present only implements the Host mode -# of the controller. The existing s3c-hsotg driver supports -# Peripheral mode, but only for the Samsung S3C platforms. -# There are plans to merge the s3c-hsotg driver with this -# driver in the near future to create a dual-role driver. Once -# that is done, Host mode will become an optional feature that -# is selected with a config option. - +obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o +dwc2-y := core.o core_intr.o dwc2-y += hcd.o hcd_intr.o dwc2-y += hcd_queue.o hcd_ddma.o -ifneq ($(CONFIG_PCI),) - obj-$(CONFIG_USB_DWC2) += dwc2_pci.o -endif -obj-$(CONFIG_USB_DWC2) += dwc2_platform.o +# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to +# this location and renamed gadget.c. When building for dynamically linked +# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode, +# the core module will be dwc2.ko, the PCI bus interface module will called +# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko. +# At present the host and gadget driver will be separate drivers, but there +# are plans in the near future to create a dual-role driver. -dwc2_pci-y += pci.o -dwc2_platform-y += platform.o +ifneq ($(CONFIG_USB_DWC2_PCI),) + obj-$(CONFIG_USB_DWC2_HOST) += dwc2_pci.o + dwc2_pci-y := pci.o +endif + +ifneq ($(CONFIG_USB_DWC2_PLATFORM),) + obj-$(CONFIG_USB_DWC2_HOST) += dwc2_platform.o + dwc2_platform-y := platform.o +endif + +obj-$(CONFIG_USB_DWC2_PERIPHERAL) += dwc2_gadget.o +dwc2_gadget-y := gadget.o diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/dwc2/gadget.c similarity index 91% rename from drivers/usb/gadget/s3c-hsotg.c rename to drivers/usb/dwc2/gadget.c index 2a9cb674926a..a8db29e54320 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/dwc2/gadget.c @@ -37,7 +37,7 @@ #include #include -#include "s3c-hsotg.h" +#include "hw.h" static const char * const s3c_hsotg_supply_names[] = { "vusb_d", /* digital USB supply, 1.2V */ @@ -340,9 +340,8 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) /* set FIFO sizes to 2048/1024 */ writel(2048, hsotg->regs + GRXFSIZ); - writel(GNPTXFSIZ_NPTxFStAddr(2048) | - GNPTXFSIZ_NPTxFDep(1024), - hsotg->regs + GNPTXFSIZ); + writel((2048 << FIFOSIZE_STARTADDR_SHIFT) | + (1024 << FIFOSIZE_DEPTH_SHIFT), hsotg->regs + GNPTXFSIZ); /* * arange all the rest of the TX FIFOs, as some versions of this @@ -362,10 +361,10 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) for (ep = 1; ep <= 15; ep++) { val = addr; - val |= size << DPTXFSIZn_DPTxFSize_SHIFT; + val |= size << FIFOSIZE_DEPTH_SHIFT; addr += size; - writel(val, hsotg->regs + DPTXFSIZn(ep)); + writel(val, hsotg->regs + DPTXFSIZN(ep)); } /* @@ -373,15 +372,15 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) * all fifos are flushed before continuing */ - writel(GRSTCTL_TxFNum(0x10) | GRSTCTL_TxFFlsh | - GRSTCTL_RxFFlsh, hsotg->regs + GRSTCTL); + writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH | + GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL); /* wait until the fifos are both flushed */ timeout = 100; while (1) { val = readl(hsotg->regs + GRSTCTL); - if ((val & (GRSTCTL_TxFFlsh | GRSTCTL_RxFFlsh)) == 0) + if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0) break; if (--timeout == 0) { @@ -495,14 +494,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, * how much data is left in the fifo. */ - size_left = DxEPTSIZ_XferSize_GET(epsize); + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); /* * if shared fifo, we cannot write anything until the * previous data has been completely sent. */ if (hs_ep->fifo_load != 0) { - s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP); return -ENOSPC; } @@ -523,7 +522,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, __func__, can_write); if (can_write <= 0) { - s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP); return -ENOSPC; } } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { @@ -532,16 +531,16 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, can_write &= 0xffff; can_write *= 4; } else { - if (GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { + if (GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, "%s: no queue slots available (0x%08x)\n", __func__, gnptxsts); - s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTxFEmp); + s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTXFEMP); return -ENOSPC; } - can_write = GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write = GNPTXSTS_NP_TXF_SPC_AVAIL_GET(gnptxsts); can_write *= 4; /* fifo size is in 32bit quantities. */ } @@ -569,8 +568,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, /* it's needed only when we do not use dedicated fifos */ if (!hsotg->dedicated_fifos) s3c_hsotg_en_gsint(hsotg, - periodic ? GINTSTS_PTxFEmp : - GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTXFEMP : + GINTSTS_NPTXFEMP); } /* see if we can write data */ @@ -598,8 +597,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, /* it's needed only when we do not use dedicated fifos */ if (!hsotg->dedicated_fifos) s3c_hsotg_en_gsint(hsotg, - periodic ? GINTSTS_PTxFEmp : - GINTSTS_NPTxFEmp); + periodic ? GINTSTS_PTXFEMP : + GINTSTS_NPTXFEMP); } dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", @@ -636,12 +635,12 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) unsigned maxpkt; if (index != 0) { - maxsize = DxEPTSIZ_XferSize_LIMIT + 1; - maxpkt = DxEPTSIZ_PktCnt_LIMIT + 1; + maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1; + maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1; } else { maxsize = 64+64; if (hs_ep->dir_in) - maxpkt = DIEPTSIZ0_PktCnt_LIMIT + 1; + maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1; else maxpkt = 2; } @@ -710,7 +709,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, /* If endpoint is stalled, we will restart request later */ ctrl = readl(hsotg->regs + epctrl_reg); - if (ctrl & DxEPCTL_Stall) { + if (ctrl & DXEPCTL_STALL) { dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); return; } @@ -750,9 +749,9 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, if (dir_in && index != 0) if (hs_ep->isochronous) - epsize = DxEPTSIZ_MC(packets); + epsize = DXEPTSIZ_MC(packets); else - epsize = DxEPTSIZ_MC(1); + epsize = DXEPTSIZ_MC(1); else epsize = 0; @@ -766,8 +765,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, packets++; } - epsize |= DxEPTSIZ_PktCnt(packets); - epsize |= DxEPTSIZ_XferSize(length); + epsize |= DXEPTSIZ_PKTCNT(packets); + epsize |= DXEPTSIZ_XFERSIZE(length); dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", __func__, packets, length, ureq->length, epsize, epsize_reg); @@ -793,8 +792,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, __func__, &ureq->dma, dma_reg); } - ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= DxEPCTL_USBActEp; + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup); @@ -802,7 +801,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, if (hsotg->setup && index == 0) hsotg->setup = 0; else - ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); @@ -828,7 +827,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, * to debugging to see what is going on. */ if (dir_in) - writel(DIEPMSK_INTknTXFEmpMsk, + writel(DIEPMSK_INTKNTXFEMPMSK, hsotg->regs + DIEPINT(index)); /* @@ -837,12 +836,12 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, */ /* check ep is enabled */ - if (!(readl(hsotg->regs + epctrl_reg) & DxEPCTL_EPEna)) + if (!(readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA)) dev_warn(hsotg->dev, - "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n", + "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n", index, readl(hsotg->regs + epctrl_reg)); - dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", + dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n", __func__, readl(hsotg->regs + epctrl_reg)); /* enable ep interrupts */ @@ -1205,12 +1204,12 @@ static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) { */ ctrl = readl(hsotg->regs + reg); - ctrl |= DxEPCTL_Stall; - ctrl |= DxEPCTL_CNAK; + ctrl |= DXEPCTL_STALL; + ctrl |= DXEPCTL_CNAK; writel(ctrl, hsotg->regs + reg); dev_dbg(hsotg->dev, - "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", + "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n", ctrl, reg, readl(hsotg->regs + reg)); /* @@ -1262,8 +1261,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, case USB_REQ_SET_ADDRESS: s3c_hsotg_disconnect(hsotg); dcfg = readl(hsotg->regs + DCFG); - dcfg &= ~DCFG_DevAddr_MASK; - dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT; + dcfg &= ~DCFG_DEVADDR_MASK; + dcfg |= ctrl->wValue << DCFG_DEVADDR_SHIFT; writel(dcfg, hsotg->regs + DCFG); dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); @@ -1458,7 +1457,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) int ptr; dev_warn(hsotg->dev, - "%s: FIFO %d bytes on ep%d but no req (DxEPCTl=0x%08x)\n", + "%s: FIFO %d bytes on ep%d but no req (DXEPCTl=0x%08x)\n", __func__, size, ep_idx, epctl); /* dump the data from the FIFO, we've nothing we can do */ @@ -1530,13 +1529,13 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "sending zero-length packet\n"); /* issue a zero-sized packet to terminate this */ - writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | - DxEPTSIZ_XferSize(0), hsotg->regs + DIEPTSIZ(0)); + writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(0), hsotg->regs + DIEPTSIZ(0)); ctrl = readl(hsotg->regs + DIEPCTL0); - ctrl |= DxEPCTL_CNAK; /* clear NAK set by core */ - ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ - ctrl |= DxEPCTL_USBActEp; + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; writel(ctrl, hsotg->regs + DIEPCTL0); } @@ -1557,7 +1556,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; - unsigned size_left = DxEPTSIZ_XferSize_GET(epsize); + unsigned size_left = DXEPTSIZ_XFERSIZE_GET(epsize); int result = 0; if (!hs_req) { @@ -1657,24 +1656,22 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) WARN_ON(using_dma(hsotg)); - epnum = grxstsr & GRXSTS_EPNum_MASK; - status = grxstsr & GRXSTS_PktSts_MASK; + epnum = grxstsr & GRXSTS_EPNUM_MASK; + status = grxstsr & GRXSTS_PKTSTS_MASK; - size = grxstsr & GRXSTS_ByteCnt_MASK; - size >>= GRXSTS_ByteCnt_SHIFT; + size = grxstsr & GRXSTS_BYTECNT_MASK; + size >>= GRXSTS_BYTECNT_SHIFT; if (1) dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", __func__, grxstsr, size, epnum); -#define __status(x) ((x) >> GRXSTS_PktSts_SHIFT) - - switch (status >> GRXSTS_PktSts_SHIFT) { - case __status(GRXSTS_PktSts_GlobalOutNAK): - dev_dbg(hsotg->dev, "GlobalOutNAK\n"); + switch ((status & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT) { + case GRXSTS_PKTSTS_GLOBALOUTNAK: + dev_dbg(hsotg->dev, "GLOBALOUTNAK\n"); break; - case __status(GRXSTS_PktSts_OutDone): + case GRXSTS_PKTSTS_OUTDONE: dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", s3c_hsotg_read_frameno(hsotg)); @@ -1682,7 +1679,7 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) s3c_hsotg_handle_outdone(hsotg, epnum, false); break; - case __status(GRXSTS_PktSts_SetupDone): + case GRXSTS_PKTSTS_SETUPDONE: dev_dbg(hsotg->dev, "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), @@ -1691,11 +1688,11 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg) s3c_hsotg_handle_outdone(hsotg, epnum, true); break; - case __status(GRXSTS_PktSts_OutRX): + case GRXSTS_PKTSTS_OUTRX: s3c_hsotg_rx_data(hsotg, epnum, size); break; - case __status(GRXSTS_PktSts_SetupRX): + case GRXSTS_PKTSTS_SETUPRX: dev_dbg(hsotg->dev, "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", s3c_hsotg_read_frameno(hsotg), @@ -1761,7 +1758,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, hs_ep->ep.maxpacket = mps; hs_ep->mc = 1; } else { - mpsval = mps & DxEPCTL_MPS_MASK; + mpsval = mps & DXEPCTL_MPS_MASK; if (mpsval > 1024) goto bad_mps; mcval = ((mps >> 11) & 0x3) + 1; @@ -1777,13 +1774,13 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, */ reg = readl(regs + DIEPCTL(ep)); - reg &= ~DxEPCTL_MPS_MASK; + reg &= ~DXEPCTL_MPS_MASK; reg |= mpsval; writel(reg, regs + DIEPCTL(ep)); if (ep) { reg = readl(regs + DOEPCTL(ep)); - reg &= ~DxEPCTL_MPS_MASK; + reg &= ~DXEPCTL_MPS_MASK; reg |= mpsval; writel(reg, regs + DOEPCTL(ep)); } @@ -1804,7 +1801,7 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) int timeout; int val; - writel(GRSTCTL_TxFNum(idx) | GRSTCTL_TxFFlsh, + writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH, hsotg->regs + GRSTCTL); /* wait until the fifo is flushed */ @@ -1813,7 +1810,7 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx) while (1) { val = readl(hsotg->regs + GRSTCTL); - if ((val & (GRSTCTL_TxFFlsh)) == 0) + if ((val & (GRSTCTL_TXFFLSH)) == 0) break; if (--timeout == 0) { @@ -1896,7 +1893,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, * aligned). */ - size_left = DxEPTSIZ_XferSize_GET(epsize); + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; @@ -1963,17 +1960,17 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", __func__, idx, dir_in ? "in" : "out", ints); - if (ints & DxEPINT_XferCompl) { + if (ints & DXEPINT_XFERCOMPL) { if (hs_ep->isochronous && hs_ep->interval == 1) { - if (ctrl & DxEPCTL_EOFrNum) - ctrl |= DxEPCTL_SetEvenFr; + if (ctrl & DXEPCTL_EOFRNUM) + ctrl |= DXEPCTL_SETEVENFR; else - ctrl |= DxEPCTL_SetOddFr; + ctrl |= DXEPCTL_SETODDFR; writel(ctrl, hsotg->regs + epctl_reg); } dev_dbg(hsotg->dev, - "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", + "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n", __func__, readl(hsotg->regs + epctl_reg), readl(hsotg->regs + epsiz_reg)); @@ -1996,7 +1993,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, } } - if (ints & DxEPINT_EPDisbld) { + if (ints & DXEPINT_EPDISBLD) { dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); if (dir_in) { @@ -2004,20 +2001,20 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, s3c_hsotg_txfifo_flush(hsotg, idx); - if ((epctl & DxEPCTL_Stall) && - (epctl & DxEPCTL_EPType_Bulk)) { + if ((epctl & DXEPCTL_STALL) && + (epctl & DXEPCTL_EPTYPE_BULK)) { int dctl = readl(hsotg->regs + DCTL); - dctl |= DCTL_CGNPInNAK; + dctl |= DCTL_CGNPINNAK; writel(dctl, hsotg->regs + DCTL); } } } - if (ints & DxEPINT_AHBErr) + if (ints & DXEPINT_AHBERR) dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); - if (ints & DxEPINT_Setup) { /* Setup or Timeout */ + if (ints & DXEPINT_SETUP) { /* Setup or Timeout */ dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); if (using_dma(hsotg) && idx == 0) { @@ -2035,25 +2032,25 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, } } - if (ints & DxEPINT_Back2BackSetup) + if (ints & DXEPINT_BACK2BACKSETUP) dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); if (dir_in && !hs_ep->isochronous) { /* not sure if this is important, but we'll clear it anyway */ - if (ints & DIEPMSK_INTknTXFEmpMsk) { + if (ints & DIEPMSK_INTKNTXFEMPMSK) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", __func__, idx); } /* this probably means something bad is happening */ - if (ints & DIEPMSK_INTknEPMisMsk) { + if (ints & DIEPMSK_INTKNEPMISMSK) { dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", __func__, idx); } /* FIFO has space or is empty (see GAHBCFG) */ if (hsotg->dedicated_fifos && - ints & DIEPMSK_TxFIFOEmpty) { + ints & DIEPMSK_TXFIFOEMPTY) { dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", __func__, idx); if (!using_dma(hsotg)) @@ -2089,21 +2086,21 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) */ /* catch both EnumSpd_FS and EnumSpd_FS48 */ - switch (dsts & DSTS_EnumSpd_MASK) { - case DSTS_EnumSpd_FS: - case DSTS_EnumSpd_FS48: + switch (dsts & DSTS_ENUMSPD_MASK) { + case DSTS_ENUMSPD_FS: + case DSTS_ENUMSPD_FS48: hsotg->gadget.speed = USB_SPEED_FULL; ep0_mps = EP0_MPS_LIMIT; ep_mps = 1023; break; - case DSTS_EnumSpd_HS: + case DSTS_ENUMSPD_HS: hsotg->gadget.speed = USB_SPEED_HIGH; ep0_mps = EP0_MPS_LIMIT; ep_mps = 1024; break; - case DSTS_EnumSpd_LS: + case DSTS_ENUMSPD_LS: hsotg->gadget.speed = USB_SPEED_LOW; /* * note, we don't actually support LS in this driver at the @@ -2226,9 +2223,9 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic) } /* IRQ flags which will trigger a retry around the IRQ loop */ -#define IRQ_RETRY_MASK (GINTSTS_NPTxFEmp | \ - GINTSTS_PTxFEmp | \ - GINTSTS_RxFLvl) +#define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \ + GINTSTS_PTXFEMP | \ + GINTSTS_RXFLVL) /** * s3c_hsotg_corereset - issue softreset to the core @@ -2244,14 +2241,14 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) dev_dbg(hsotg->dev, "resetting core\n"); /* issue soft reset */ - writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL); + writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL); timeout = 10000; do { grstctl = readl(hsotg->regs + GRSTCTL); - } while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0); + } while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0); - if (grstctl & GRSTCTL_CSftRst) { + if (grstctl & GRSTCTL_CSFTRST) { dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); return -EINVAL; } @@ -2268,7 +2265,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) return -ETIMEDOUT; } - if (!(grstctl & GRSTCTL_AHBIdle)) + if (!(grstctl & GRSTCTL_AHBIDLE)) continue; break; /* reset done */ @@ -2294,14 +2291,14 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) */ /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(hsotg->phyif | GUSBCFG_TOutCal(7) | + writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | (0x5 << 10), hsotg->regs + GUSBCFG); s3c_hsotg_init_fifo(hsotg); - __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); - writel(1 << 18 | DCFG_DevSpd_HS, hsotg->regs + DCFG); + writel(1 << 18 | DCFG_DEVSPD_HS, hsotg->regs + DCFG); /* Clear any pending OTG interrupts */ writel(0xffffffff, hsotg->regs + GOTGINT); @@ -2309,21 +2306,21 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) /* Clear any pending interrupts */ writel(0xffffffff, hsotg->regs + GINTSTS); - writel(GINTSTS_ErlySusp | GINTSTS_SessReqInt | - GINTSTS_GOUTNakEff | GINTSTS_GINNakEff | - GINTSTS_ConIDStsChng | GINTSTS_USBRst | - GINTSTS_EnumDone | GINTSTS_OTGInt | - GINTSTS_USBSusp | GINTSTS_WkUpInt, - hsotg->regs + GINTMSK); + writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT | + GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF | + GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST | + GINTSTS_ENUMDONE | GINTSTS_OTGINT | + GINTSTS_USBSUSP | GINTSTS_WKUPINT, + hsotg->regs + GINTMSK); if (using_dma(hsotg)) - writel(GAHBCFG_GlblIntrEn | GAHBCFG_DMAEn | - GAHBCFG_HBstLen_Incr4, + writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN | + GAHBCFG_HBSTLEN_INCR4, hsotg->regs + GAHBCFG); else - writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NPTxFEmpLvl | - GAHBCFG_PTxFEmpLvl) : 0) | - GAHBCFG_GlblIntrEn, + writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL | + GAHBCFG_P_TXF_EMP_LVL) : 0) | + GAHBCFG_GLBL_INTR_EN, hsotg->regs + GAHBCFG); /* @@ -2332,22 +2329,22 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) * interrupts. */ - writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty | - DIEPMSK_INTknTXFEmpMsk : 0) | - DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk | - DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | - DIEPMSK_INTknEPMisMsk, - hsotg->regs + DIEPMSK); + writel(((hsotg->dedicated_fifos) ? DIEPMSK_TXFIFOEMPTY | + DIEPMSK_INTKNTXFEMPMSK : 0) | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_INTKNEPMISMSK, + hsotg->regs + DIEPMSK); /* * don't need XferCompl, we get that from RXFIFO in slave mode. In * DMA mode we may need this. */ - writel((using_dma(hsotg) ? (DIEPMSK_XferComplMsk | - DIEPMSK_TimeOUTMsk) : 0) | - DOEPMSK_EPDisbldMsk | DOEPMSK_AHBErrMsk | - DOEPMSK_SetupMsk, - hsotg->regs + DOEPMSK); + writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK) : 0) | + DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_SETUPMSK, + hsotg->regs + DOEPMSK); writel(0, hsotg->regs + DAINTMSK); @@ -2356,7 +2353,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) readl(hsotg->regs + DOEPCTL0)); /* enable in and out endpoint interrupts */ - s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPInt | GINTSTS_IEPInt); + s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT); /* * Enable the RXFIFO when in slave mode, as this is how we collect @@ -2364,15 +2361,15 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) * things we cannot process, so do not use it. */ if (!using_dma(hsotg)) - s3c_hsotg_en_gsint(hsotg, GINTSTS_RxFLvl); + s3c_hsotg_en_gsint(hsotg, GINTSTS_RXFLVL); /* Enable interrupts for EP0 in and out */ s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); - __orr32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); + __orr32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE); udelay(10); /* see openiboot */ - __bic32(hsotg->regs + DCTL, DCTL_PWROnPrgDone); + __bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE); dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); @@ -2382,17 +2379,17 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) */ /* set to read 1 8byte packet */ - writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) | - DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0); + writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0); writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - DxEPCTL_CNAK | DxEPCTL_EPEna | - DxEPCTL_USBActEp, + DXEPCTL_CNAK | DXEPCTL_EPENA | + DXEPCTL_USBACTEP, hsotg->regs + DOEPCTL0); /* enable, but don't activate EP0in */ writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) | - DxEPCTL_USBActEp, hsotg->regs + DIEPCTL0); + DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0); s3c_hsotg_enqueue_setup(hsotg); @@ -2401,14 +2398,14 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) readl(hsotg->regs + DOEPCTL0)); /* clear global NAKs */ - writel(DCTL_CGOUTNak | DCTL_CGNPInNAK, + writel(DCTL_CGOUTNAK | DCTL_CGNPINNAK, hsotg->regs + DCTL); /* must be at-least 3ms to allow bus to see disconnect */ mdelay(3); /* remove the soft-disconnect and let's go */ - __bic32(hsotg->regs + DCTL, DCTL_SftDiscon); + __bic32(hsotg->regs + DCTL, DCTL_SFTDISCON); } /** @@ -2433,7 +2430,7 @@ irq_retry: gintsts &= gintmsk; - if (gintsts & GINTSTS_OTGInt) { + if (gintsts & GINTSTS_OTGINT) { u32 otgint = readl(hsotg->regs + GOTGINT); dev_info(hsotg->dev, "OTGInt: %08x\n", otgint); @@ -2441,34 +2438,34 @@ irq_retry: writel(otgint, hsotg->regs + GOTGINT); } - if (gintsts & GINTSTS_SessReqInt) { + if (gintsts & GINTSTS_SESSREQINT) { dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__); - writel(GINTSTS_SessReqInt, hsotg->regs + GINTSTS); + writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); } - if (gintsts & GINTSTS_EnumDone) { - writel(GINTSTS_EnumDone, hsotg->regs + GINTSTS); + if (gintsts & GINTSTS_ENUMDONE) { + writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS); s3c_hsotg_irq_enumdone(hsotg); } - if (gintsts & GINTSTS_ConIDStsChng) { + if (gintsts & GINTSTS_CONIDSTSCHNG) { dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n", readl(hsotg->regs + DSTS), readl(hsotg->regs + GOTGCTL)); - writel(GINTSTS_ConIDStsChng, hsotg->regs + GINTSTS); + writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); } - if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) { + if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { u32 daint = readl(hsotg->regs + DAINT); u32 daintmsk = readl(hsotg->regs + DAINTMSK); u32 daint_out, daint_in; int ep; daint &= daintmsk; - daint_out = daint >> DAINT_OutEP_SHIFT; - daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); + daint_out = daint >> DAINT_OUTEP_SHIFT; + daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT); dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); @@ -2483,7 +2480,7 @@ irq_retry: } } - if (gintsts & GINTSTS_USBRst) { + if (gintsts & GINTSTS_USBRST) { u32 usb_status = readl(hsotg->regs + GOTGCTL); @@ -2491,7 +2488,7 @@ irq_retry: dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", readl(hsotg->regs + GNPTXSTS)); - writel(GINTSTS_USBRst, hsotg->regs + GINTSTS); + writel(GINTSTS_USBRST, hsotg->regs + GINTSTS); if (usb_status & GOTGCTL_BSESVLD) { if (time_after(jiffies, hsotg->last_rst + @@ -2508,7 +2505,7 @@ irq_retry: /* check both FIFOs */ - if (gintsts & GINTSTS_NPTxFEmp) { + if (gintsts & GINTSTS_NPTXFEMP) { dev_dbg(hsotg->dev, "NPTxFEmp\n"); /* @@ -2517,20 +2514,20 @@ irq_retry: * it needs re-enabling */ - s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTXFEMP); s3c_hsotg_irq_fifoempty(hsotg, false); } - if (gintsts & GINTSTS_PTxFEmp) { + if (gintsts & GINTSTS_PTXFEMP) { dev_dbg(hsotg->dev, "PTxFEmp\n"); /* See note in GINTSTS_NPTxFEmp */ - s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTxFEmp); + s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTXFEMP); s3c_hsotg_irq_fifoempty(hsotg, true); } - if (gintsts & GINTSTS_RxFLvl) { + if (gintsts & GINTSTS_RXFLVL) { /* * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, * we need to retry s3c_hsotg_handle_rx if this is still @@ -2540,28 +2537,28 @@ irq_retry: s3c_hsotg_handle_rx(hsotg); } - if (gintsts & GINTSTS_ModeMis) { + if (gintsts & GINTSTS_MODEMIS) { dev_warn(hsotg->dev, "warning, mode mismatch triggered\n"); - writel(GINTSTS_ModeMis, hsotg->regs + GINTSTS); + writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); } - if (gintsts & GINTSTS_USBSusp) { + if (gintsts & GINTSTS_USBSUSP) { dev_info(hsotg->dev, "GINTSTS_USBSusp\n"); - writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS); + writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); call_gadget(hsotg, suspend); } - if (gintsts & GINTSTS_WkUpInt) { + if (gintsts & GINTSTS_WKUPINT) { dev_info(hsotg->dev, "GINTSTS_WkUpIn\n"); - writel(GINTSTS_WkUpInt, hsotg->regs + GINTSTS); + writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); call_gadget(hsotg, resume); } - if (gintsts & GINTSTS_ErlySusp) { + if (gintsts & GINTSTS_ERLYSUSP) { dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); - writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS); + writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS); } /* @@ -2570,18 +2567,18 @@ irq_retry: * the occurrence. */ - if (gintsts & GINTSTS_GOUTNakEff) { + if (gintsts & GINTSTS_GOUTNAKEFF) { dev_info(hsotg->dev, "GOUTNakEff triggered\n"); - writel(DCTL_CGOUTNak, hsotg->regs + DCTL); + writel(DCTL_CGOUTNAK, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } - if (gintsts & GINTSTS_GINNakEff) { + if (gintsts & GINTSTS_GINNAKEFF) { dev_info(hsotg->dev, "GINNakEff triggered\n"); - writel(DCTL_CGNPInNAK, hsotg->regs + DCTL); + writel(DCTL_CGNPINNAK, hsotg->regs + DCTL); s3c_hsotg_dump(hsotg); } @@ -2645,14 +2642,14 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, spin_lock_irqsave(&hsotg->lock, flags); - epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK); - epctrl |= DxEPCTL_MPS(mps); + epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK); + epctrl |= DXEPCTL_MPS(mps); /* * mark the endpoint as active, otherwise the core may ignore * transactions entirely for this endpoint */ - epctrl |= DxEPCTL_USBActEp; + epctrl |= DXEPCTL_USBACTEP; /* * set the NAK status on the endpoint, otherwise we might try and @@ -2661,7 +2658,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, * size register hasn't been set. */ - epctrl |= DxEPCTL_SNAK; + epctrl |= DXEPCTL_SNAK; /* update the endpoint state */ s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps); @@ -2677,15 +2674,15 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_ISOC: - epctrl |= DxEPCTL_EPType_Iso; - epctrl |= DxEPCTL_SetEvenFr; + epctrl |= DXEPCTL_EPTYPE_ISO; + epctrl |= DXEPCTL_SETEVENFR; hs_ep->isochronous = 1; if (dir_in) hs_ep->periodic = 1; break; case USB_ENDPOINT_XFER_BULK: - epctrl |= DxEPCTL_EPType_Bulk; + epctrl |= DXEPCTL_EPTYPE_BULK; break; case USB_ENDPOINT_XFER_INT: @@ -2698,14 +2695,14 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, */ hs_ep->periodic = 1; - epctrl |= DxEPCTL_TxFNum(index); + epctrl |= DXEPCTL_TXFNUM(index); } - epctrl |= DxEPCTL_EPType_Intterupt; + epctrl |= DXEPCTL_EPTYPE_INTERRUPT; break; case USB_ENDPOINT_XFER_CONTROL: - epctrl |= DxEPCTL_EPType_Control; + epctrl |= DXEPCTL_EPTYPE_CONTROL; break; } @@ -2714,11 +2711,11 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) - epctrl |= DxEPCTL_TxFNum(index); + epctrl |= DXEPCTL_TXFNUM(index); /* for non control endpoints, set PID to D0 */ if (index) - epctrl |= DxEPCTL_SetD0PID; + epctrl |= DXEPCTL_SETD0PID; dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", __func__, epctrl); @@ -2763,9 +2760,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) ctrl = readl(hsotg->regs + epctrl_reg); - ctrl &= ~DxEPCTL_EPEna; - ctrl &= ~DxEPCTL_USBActEp; - ctrl |= DxEPCTL_SNAK; + ctrl &= ~DXEPCTL_EPENA; + ctrl &= ~DXEPCTL_USBACTEP; + ctrl |= DXEPCTL_SNAK; dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); writel(ctrl, hsotg->regs + epctrl_reg); @@ -2852,15 +2849,15 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) epctl = readl(hs->regs + epreg); if (value) { - epctl |= DxEPCTL_Stall + DxEPCTL_SNAK; - if (epctl & DxEPCTL_EPEna) - epctl |= DxEPCTL_EPDis; + epctl |= DXEPCTL_STALL + DXEPCTL_SNAK; + if (epctl & DXEPCTL_EPENA) + epctl |= DXEPCTL_EPDIS; } else { - epctl &= ~DxEPCTL_Stall; - xfertype = epctl & DxEPCTL_EPType_MASK; - if (xfertype == DxEPCTL_EPType_Bulk || - xfertype == DxEPCTL_EPType_Intterupt) - epctl |= DxEPCTL_SetD0PID; + epctl &= ~DXEPCTL_STALL; + xfertype = epctl & DXEPCTL_EPTYPE_MASK; + if (xfertype == DXEPCTL_EPTYPE_BULK || + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; } writel(epctl, hs->regs + epreg); @@ -2869,13 +2866,13 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) epctl = readl(hs->regs + epreg); if (value) - epctl |= DxEPCTL_Stall; + epctl |= DXEPCTL_STALL; else { - epctl &= ~DxEPCTL_Stall; - xfertype = epctl & DxEPCTL_EPType_MASK; - if (xfertype == DxEPCTL_EPType_Bulk || - xfertype == DxEPCTL_EPType_Intterupt) - epctl |= DxEPCTL_SetD0PID; + epctl &= ~DXEPCTL_STALL; + xfertype = epctl & DXEPCTL_EPTYPE_MASK; + if (xfertype == DXEPCTL_EPTYPE_BULK || + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; } writel(epctl, hs->regs + epreg); @@ -2965,22 +2962,22 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { /* unmask subset of endpoint interrupts */ - writel(DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | - DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk, - hsotg->regs + DIEPMSK); + writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK, + hsotg->regs + DIEPMSK); - writel(DOEPMSK_SetupMsk | DOEPMSK_AHBErrMsk | - DOEPMSK_EPDisbldMsk | DOEPMSK_XferComplMsk, - hsotg->regs + DOEPMSK); + writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK, + hsotg->regs + DOEPMSK); writel(0, hsotg->regs + DAINTMSK); /* Be in disconnected state until gadget is registered */ - __orr32(hsotg->regs + DCTL, DCTL_SftDiscon); + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); if (0) { /* post global nak until we're ready */ - writel(DCTL_SGNPInNAK | DCTL_SGOUTNak, + writel(DCTL_SGNPINNAK | DCTL_SGOUTNAK, hsotg->regs + DCTL); } @@ -2993,10 +2990,10 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) s3c_hsotg_init_fifo(hsotg); /* set the PLL on, remove the HNP/SRP and set the PHY */ - writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | (0x5 << 10), + writel(GUSBCFG_PHYIF16 | GUSBCFG_TOUTCAL(7) | (0x5 << 10), hsotg->regs + GUSBCFG); - writel(using_dma(hsotg) ? GAHBCFG_DMAEn : 0x0, + writel(using_dma(hsotg) ? GAHBCFG_DMA_EN : 0x0, hsotg->regs + GAHBCFG); } @@ -3187,8 +3184,8 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, * code is changed to make each endpoint's direction changeable. */ - ptxfifo = readl(hsotg->regs + DPTXFSIZn(epnum)); - hs_ep->fifo_size = DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; + ptxfifo = readl(hsotg->regs + DPTXFSIZN(epnum)); + hs_ep->fifo_size = FIFOSIZE_DEPTH_GET(ptxfifo) * 4; /* * if we're using dma, we need to set the next-endpoint pointer @@ -3196,7 +3193,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ if (using_dma(hsotg)) { - u32 next = DxEPCTL_NextEp((epnum + 1) % 15); + u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15); writel(next, hsotg->regs + DIEPCTL(epnum)); writel(next, hsotg->regs + DOEPCTL(epnum)); } @@ -3250,10 +3247,10 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) /* show periodic fifo settings */ for (idx = 1; idx <= 15; idx++) { - val = readl(regs + DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZN(idx)); dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, - val >> DPTXFSIZn_DPTxFSize_SHIFT, - val & DPTXFSIZn_DPTxFStAddr_MASK); + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); } for (idx = 0; idx < 15; idx++) { @@ -3368,17 +3365,17 @@ static int fifo_show(struct seq_file *seq, void *v) val = readl(regs + GNPTXFSIZ); seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", - val >> GNPTXFSIZ_NPTxFDep_SHIFT, - val & GNPTXFSIZ_NPTxFStAddr_MASK); + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_DEPTH_MASK); seq_puts(seq, "\nPeriodic TXFIFOs:\n"); for (idx = 1; idx <= 15; idx++) { - val = readl(regs + DPTXFSIZn(idx)); + val = readl(regs + DPTXFSIZN(idx)); seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, - val >> DPTXFSIZn_DPTxFSize_SHIFT, - val & DPTXFSIZn_DPTxFStAddr_MASK); + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); } return 0; @@ -3662,14 +3659,14 @@ static int s3c_hsotg_probe(struct platform_device *pdev) } /* Set default UTMI width */ - hsotg->phyif = GUSBCFG_PHYIf16; + hsotg->phyif = GUSBCFG_PHYIF16; /* * If using the generic PHY framework, check if the PHY bus * width is 8-bit and set the phyif appropriately. */ if (hsotg->phy && (phy_get_bus_width(phy) == 8)) - hsotg->phyif = GUSBCFG_PHYIf8; + hsotg->phyif = GUSBCFG_PHYIF8; if (hsotg->phy) phy_init(hsotg->phy); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3557c7e5040d..7fca52bfe5b1 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -300,12 +300,6 @@ config USB_PXA27X dynamically linked module called "pxa27x_udc" and force all gadget drivers to also be dynamically linked. -config USB_S3C_HSOTG - tristate "Designware/S3C HS/OtG USB Device controller" - help - The Designware USB2.0 high-speed gadget controller - integrated into many SoCs. - config USB_S3C2410 tristate "S3C2410 USB Device Controller" depends on ARCH_S3C24XX diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 5f150bc1b4bc..49514ea60a98 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -26,7 +26,6 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o -obj-$(CONFIG_USB_S3C_HSOTG) += s3c-hsotg.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h deleted file mode 100644 index 85f549ff8c1f..000000000000 --- a/drivers/usb/gadget/s3c-hsotg.h +++ /dev/null @@ -1,378 +0,0 @@ -/* drivers/usb/gadget/s3c-hsotg.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * USB2.0 Highspeed/OtG Synopsis DWC2 device block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __REGS_USB_HSOTG_H -#define __REGS_USB_HSOTG_H __FILE__ - -#define HSOTG_REG(x) (x) - -#define GOTGCTL HSOTG_REG(0x000) -#define GOTGCTL_BSESVLD (1 << 19) -#define GOTGCTL_ASESVLD (1 << 18) -#define GOTGCTL_DBNC_SHORT (1 << 17) -#define GOTGCTL_CONID_B (1 << 16) -#define GOTGCTL_DEVHNPEN (1 << 11) -#define GOTGCTL_HSSETHNPEN (1 << 10) -#define GOTGCTL_HNPREQ (1 << 9) -#define GOTGCTL_HSTNEGSCS (1 << 8) -#define GOTGCTL_SESREQ (1 << 1) -#define GOTGCTL_SESREQSCS (1 << 0) - -#define GOTGINT HSOTG_REG(0x004) -#define GOTGINT_DbnceDone (1 << 19) -#define GOTGINT_ADevTOUTChg (1 << 18) -#define GOTGINT_HstNegDet (1 << 17) -#define GOTGINT_HstnegSucStsChng (1 << 9) -#define GOTGINT_SesReqSucStsChng (1 << 8) -#define GOTGINT_SesEndDet (1 << 2) - -#define GAHBCFG HSOTG_REG(0x008) -#define GAHBCFG_PTxFEmpLvl (1 << 8) -#define GAHBCFG_NPTxFEmpLvl (1 << 7) -#define GAHBCFG_DMAEn (1 << 5) -#define GAHBCFG_HBstLen_MASK (0xf << 1) -#define GAHBCFG_HBstLen_SHIFT (1) -#define GAHBCFG_HBstLen_Single (0x0 << 1) -#define GAHBCFG_HBstLen_Incr (0x1 << 1) -#define GAHBCFG_HBstLen_Incr4 (0x3 << 1) -#define GAHBCFG_HBstLen_Incr8 (0x5 << 1) -#define GAHBCFG_HBstLen_Incr16 (0x7 << 1) -#define GAHBCFG_GlblIntrEn (1 << 0) - -#define GUSBCFG HSOTG_REG(0x00C) -#define GUSBCFG_PHYLPClkSel (1 << 15) -#define GUSBCFG_HNPCap (1 << 9) -#define GUSBCFG_SRPCap (1 << 8) -#define GUSBCFG_PHYIf16 (1 << 3) -#define GUSBCFG_PHYIf8 (0 << 3) -#define GUSBCFG_TOutCal_MASK (0x7 << 0) -#define GUSBCFG_TOutCal_SHIFT (0) -#define GUSBCFG_TOutCal_LIMIT (0x7) -#define GUSBCFG_TOutCal(_x) ((_x) << 0) - -#define GRSTCTL HSOTG_REG(0x010) - -#define GRSTCTL_AHBIdle (1 << 31) -#define GRSTCTL_DMAReq (1 << 30) -#define GRSTCTL_TxFNum_MASK (0x1f << 6) -#define GRSTCTL_TxFNum_SHIFT (6) -#define GRSTCTL_TxFNum_LIMIT (0x1f) -#define GRSTCTL_TxFNum(_x) ((_x) << 6) -#define GRSTCTL_TxFFlsh (1 << 5) -#define GRSTCTL_RxFFlsh (1 << 4) -#define GRSTCTL_INTknQFlsh (1 << 3) -#define GRSTCTL_FrmCntrRst (1 << 2) -#define GRSTCTL_HSftRst (1 << 1) -#define GRSTCTL_CSftRst (1 << 0) - -#define GINTSTS HSOTG_REG(0x014) -#define GINTMSK HSOTG_REG(0x018) - -#define GINTSTS_WkUpInt (1 << 31) -#define GINTSTS_SessReqInt (1 << 30) -#define GINTSTS_DisconnInt (1 << 29) -#define GINTSTS_ConIDStsChng (1 << 28) -#define GINTSTS_PTxFEmp (1 << 26) -#define GINTSTS_HChInt (1 << 25) -#define GINTSTS_PrtInt (1 << 24) -#define GINTSTS_FetSusp (1 << 22) -#define GINTSTS_incompIP (1 << 21) -#define GINTSTS_IncomplSOIN (1 << 20) -#define GINTSTS_OEPInt (1 << 19) -#define GINTSTS_IEPInt (1 << 18) -#define GINTSTS_EPMis (1 << 17) -#define GINTSTS_EOPF (1 << 15) -#define GINTSTS_ISOutDrop (1 << 14) -#define GINTSTS_EnumDone (1 << 13) -#define GINTSTS_USBRst (1 << 12) -#define GINTSTS_USBSusp (1 << 11) -#define GINTSTS_ErlySusp (1 << 10) -#define GINTSTS_GOUTNakEff (1 << 7) -#define GINTSTS_GINNakEff (1 << 6) -#define GINTSTS_NPTxFEmp (1 << 5) -#define GINTSTS_RxFLvl (1 << 4) -#define GINTSTS_SOF (1 << 3) -#define GINTSTS_OTGInt (1 << 2) -#define GINTSTS_ModeMis (1 << 1) -#define GINTSTS_CurMod_Host (1 << 0) - -#define GRXSTSR HSOTG_REG(0x01C) -#define GRXSTSP HSOTG_REG(0x020) - -#define GRXSTS_FN_MASK (0x7f << 25) -#define GRXSTS_FN_SHIFT (25) - -#define GRXSTS_PktSts_MASK (0xf << 17) -#define GRXSTS_PktSts_SHIFT (17) -#define GRXSTS_PktSts_GlobalOutNAK (0x1 << 17) -#define GRXSTS_PktSts_OutRX (0x2 << 17) -#define GRXSTS_PktSts_OutDone (0x3 << 17) -#define GRXSTS_PktSts_SetupDone (0x4 << 17) -#define GRXSTS_PktSts_SetupRX (0x6 << 17) - -#define GRXSTS_DPID_MASK (0x3 << 15) -#define GRXSTS_DPID_SHIFT (15) -#define GRXSTS_ByteCnt_MASK (0x7ff << 4) -#define GRXSTS_ByteCnt_SHIFT (4) -#define GRXSTS_EPNum_MASK (0xf << 0) -#define GRXSTS_EPNum_SHIFT (0) - -#define GRXFSIZ HSOTG_REG(0x024) - -#define GNPTXFSIZ HSOTG_REG(0x028) - -#define GNPTXFSIZ_NPTxFDep_MASK (0xffff << 16) -#define GNPTXFSIZ_NPTxFDep_SHIFT (16) -#define GNPTXFSIZ_NPTxFDep_LIMIT (0xffff) -#define GNPTXFSIZ_NPTxFDep(_x) ((_x) << 16) -#define GNPTXFSIZ_NPTxFStAddr_MASK (0xffff << 0) -#define GNPTXFSIZ_NPTxFStAddr_SHIFT (0) -#define GNPTXFSIZ_NPTxFStAddr_LIMIT (0xffff) -#define GNPTXFSIZ_NPTxFStAddr(_x) ((_x) << 0) - -#define GNPTXSTS HSOTG_REG(0x02C) - -#define GNPTXSTS_NPtxQTop_MASK (0x7f << 24) -#define GNPTXSTS_NPtxQTop_SHIFT (24) - -#define GNPTXSTS_NPTxQSpcAvail_MASK (0xff << 16) -#define GNPTXSTS_NPTxQSpcAvail_SHIFT (16) -#define GNPTXSTS_NPTxQSpcAvail_GET(_v) (((_v) >> 16) & 0xff) - -#define GNPTXSTS_NPTxFSpcAvail_MASK (0xffff << 0) -#define GNPTXSTS_NPTxFSpcAvail_SHIFT (0) -#define GNPTXSTS_NPTxFSpcAvail_GET(_v) (((_v) >> 0) & 0xffff) - - -#define HPTXFSIZ HSOTG_REG(0x100) - -#define DPTXFSIZn(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) - -#define DPTXFSIZn_DPTxFSize_MASK (0xffff << 16) -#define DPTXFSIZn_DPTxFSize_SHIFT (16) -#define DPTXFSIZn_DPTxFSize_GET(_v) (((_v) >> 16) & 0xffff) -#define DPTXFSIZn_DPTxFSize_LIMIT (0xffff) -#define DPTXFSIZn_DPTxFSize(_x) ((_x) << 16) - -#define DPTXFSIZn_DPTxFStAddr_MASK (0xffff << 0) -#define DPTXFSIZn_DPTxFStAddr_SHIFT (0) - -/* Device mode registers */ -#define DCFG HSOTG_REG(0x800) - -#define DCFG_EPMisCnt_MASK (0x1f << 18) -#define DCFG_EPMisCnt_SHIFT (18) -#define DCFG_EPMisCnt_LIMIT (0x1f) -#define DCFG_EPMisCnt(_x) ((_x) << 18) - -#define DCFG_PerFrInt_MASK (0x3 << 11) -#define DCFG_PerFrInt_SHIFT (11) -#define DCFG_PerFrInt_LIMIT (0x3) -#define DCFG_PerFrInt(_x) ((_x) << 11) - -#define DCFG_DevAddr_MASK (0x7f << 4) -#define DCFG_DevAddr_SHIFT (4) -#define DCFG_DevAddr_LIMIT (0x7f) -#define DCFG_DevAddr(_x) ((_x) << 4) - -#define DCFG_NZStsOUTHShk (1 << 2) - -#define DCFG_DevSpd_MASK (0x3 << 0) -#define DCFG_DevSpd_SHIFT (0) -#define DCFG_DevSpd_HS (0x0 << 0) -#define DCFG_DevSpd_FS (0x1 << 0) -#define DCFG_DevSpd_LS (0x2 << 0) -#define DCFG_DevSpd_FS48 (0x3 << 0) - -#define DCTL HSOTG_REG(0x804) - -#define DCTL_PWROnPrgDone (1 << 11) -#define DCTL_CGOUTNak (1 << 10) -#define DCTL_SGOUTNak (1 << 9) -#define DCTL_CGNPInNAK (1 << 8) -#define DCTL_SGNPInNAK (1 << 7) -#define DCTL_TstCtl_MASK (0x7 << 4) -#define DCTL_TstCtl_SHIFT (4) -#define DCTL_GOUTNakSts (1 << 3) -#define DCTL_GNPINNakSts (1 << 2) -#define DCTL_SftDiscon (1 << 1) -#define DCTL_RmtWkUpSig (1 << 0) - -#define DSTS HSOTG_REG(0x808) - -#define DSTS_SOFFN_MASK (0x3fff << 8) -#define DSTS_SOFFN_SHIFT (8) -#define DSTS_SOFFN_LIMIT (0x3fff) -#define DSTS_SOFFN(_x) ((_x) << 8) -#define DSTS_ErraticErr (1 << 3) -#define DSTS_EnumSpd_MASK (0x3 << 1) -#define DSTS_EnumSpd_SHIFT (1) -#define DSTS_EnumSpd_HS (0x0 << 1) -#define DSTS_EnumSpd_FS (0x1 << 1) -#define DSTS_EnumSpd_LS (0x2 << 1) -#define DSTS_EnumSpd_FS48 (0x3 << 1) - -#define DSTS_SuspSts (1 << 0) - -#define DIEPMSK HSOTG_REG(0x810) - -#define DIEPMSK_TxFIFOEmpty (1 << 7) -#define DIEPMSK_INEPNakEffMsk (1 << 6) -#define DIEPMSK_INTknEPMisMsk (1 << 5) -#define DIEPMSK_INTknTXFEmpMsk (1 << 4) -#define DIEPMSK_TimeOUTMsk (1 << 3) -#define DIEPMSK_AHBErrMsk (1 << 2) -#define DIEPMSK_EPDisbldMsk (1 << 1) -#define DIEPMSK_XferComplMsk (1 << 0) - -#define DOEPMSK HSOTG_REG(0x814) - -#define DOEPMSK_Back2BackSetup (1 << 6) -#define DOEPMSK_OUTTknEPdisMsk (1 << 4) -#define DOEPMSK_SetupMsk (1 << 3) -#define DOEPMSK_AHBErrMsk (1 << 2) -#define DOEPMSK_EPDisbldMsk (1 << 1) -#define DOEPMSK_XferComplMsk (1 << 0) - -#define DAINT HSOTG_REG(0x818) -#define DAINTMSK HSOTG_REG(0x81C) - -#define DAINT_OutEP_SHIFT (16) -#define DAINT_OutEP(x) (1 << ((x) + 16)) -#define DAINT_InEP(x) (1 << (x)) - -#define DTKNQR1 HSOTG_REG(0x820) -#define DTKNQR2 HSOTG_REG(0x824) -#define DTKNQR3 HSOTG_REG(0x830) -#define DTKNQR4 HSOTG_REG(0x834) - -#define DVBUSDIS HSOTG_REG(0x828) -#define DVBUSPULSE HSOTG_REG(0x82C) - -#define DIEPCTL0 HSOTG_REG(0x900) -#define DOEPCTL0 HSOTG_REG(0xB00) -#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) -#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) - -/* EP0 specialness: - * bits[29..28] - reserved (no SetD0PID, SetD1PID) - * bits[25..22] - should always be zero, this isn't a periodic endpoint - * bits[10..0] - MPS setting differenct for EP0 - */ -#define D0EPCTL_MPS_MASK (0x3 << 0) -#define D0EPCTL_MPS_SHIFT (0) -#define D0EPCTL_MPS_64 (0x0 << 0) -#define D0EPCTL_MPS_32 (0x1 << 0) -#define D0EPCTL_MPS_16 (0x2 << 0) -#define D0EPCTL_MPS_8 (0x3 << 0) - -#define DxEPCTL_EPEna (1 << 31) -#define DxEPCTL_EPDis (1 << 30) -#define DxEPCTL_SetD1PID (1 << 29) -#define DxEPCTL_SetOddFr (1 << 29) -#define DxEPCTL_SetD0PID (1 << 28) -#define DxEPCTL_SetEvenFr (1 << 28) -#define DxEPCTL_SNAK (1 << 27) -#define DxEPCTL_CNAK (1 << 26) -#define DxEPCTL_TxFNum_MASK (0xf << 22) -#define DxEPCTL_TxFNum_SHIFT (22) -#define DxEPCTL_TxFNum_LIMIT (0xf) -#define DxEPCTL_TxFNum(_x) ((_x) << 22) - -#define DxEPCTL_Stall (1 << 21) -#define DxEPCTL_Snp (1 << 20) -#define DxEPCTL_EPType_MASK (0x3 << 18) -#define DxEPCTL_EPType_SHIFT (18) -#define DxEPCTL_EPType_Control (0x0 << 18) -#define DxEPCTL_EPType_Iso (0x1 << 18) -#define DxEPCTL_EPType_Bulk (0x2 << 18) -#define DxEPCTL_EPType_Intterupt (0x3 << 18) - -#define DxEPCTL_NAKsts (1 << 17) -#define DxEPCTL_DPID (1 << 16) -#define DxEPCTL_EOFrNum (1 << 16) -#define DxEPCTL_USBActEp (1 << 15) -#define DxEPCTL_NextEp_MASK (0xf << 11) -#define DxEPCTL_NextEp_SHIFT (11) -#define DxEPCTL_NextEp_LIMIT (0xf) -#define DxEPCTL_NextEp(_x) ((_x) << 11) - -#define DxEPCTL_MPS_MASK (0x7ff << 0) -#define DxEPCTL_MPS_SHIFT (0) -#define DxEPCTL_MPS_LIMIT (0x7ff) -#define DxEPCTL_MPS(_x) ((_x) << 0) - -#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) -#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) - -#define DxEPINT_INEPNakEff (1 << 6) -#define DxEPINT_Back2BackSetup (1 << 6) -#define DxEPINT_INTknEPMis (1 << 5) -#define DxEPINT_INTknTXFEmp (1 << 4) -#define DxEPINT_OUTTknEPdis (1 << 4) -#define DxEPINT_Timeout (1 << 3) -#define DxEPINT_Setup (1 << 3) -#define DxEPINT_AHBErr (1 << 2) -#define DxEPINT_EPDisbld (1 << 1) -#define DxEPINT_XferCompl (1 << 0) - -#define DIEPTSIZ0 HSOTG_REG(0x910) - -#define DIEPTSIZ0_PktCnt_MASK (0x3 << 19) -#define DIEPTSIZ0_PktCnt_SHIFT (19) -#define DIEPTSIZ0_PktCnt_LIMIT (0x3) -#define DIEPTSIZ0_PktCnt(_x) ((_x) << 19) - -#define DIEPTSIZ0_XferSize_MASK (0x7f << 0) -#define DIEPTSIZ0_XferSize_SHIFT (0) -#define DIEPTSIZ0_XferSize_LIMIT (0x7f) -#define DIEPTSIZ0_XferSize(_x) ((_x) << 0) - -#define DOEPTSIZ0 HSOTG_REG(0xB10) -#define DOEPTSIZ0_SUPCnt_MASK (0x3 << 29) -#define DOEPTSIZ0_SUPCnt_SHIFT (29) -#define DOEPTSIZ0_SUPCnt_LIMIT (0x3) -#define DOEPTSIZ0_SUPCnt(_x) ((_x) << 29) - -#define DOEPTSIZ0_PktCnt (1 << 19) -#define DOEPTSIZ0_XferSize_MASK (0x7f << 0) -#define DOEPTSIZ0_XferSize_SHIFT (0) - -#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) -#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) - -#define DxEPTSIZ_MC_MASK (0x3 << 29) -#define DxEPTSIZ_MC_SHIFT (29) -#define DxEPTSIZ_MC_LIMIT (0x3) -#define DxEPTSIZ_MC(_x) ((_x) << 29) - -#define DxEPTSIZ_PktCnt_MASK (0x3ff << 19) -#define DxEPTSIZ_PktCnt_SHIFT (19) -#define DxEPTSIZ_PktCnt_GET(_v) (((_v) >> 19) & 0x3ff) -#define DxEPTSIZ_PktCnt_LIMIT (0x3ff) -#define DxEPTSIZ_PktCnt(_x) ((_x) << 19) - -#define DxEPTSIZ_XferSize_MASK (0x7ffff << 0) -#define DxEPTSIZ_XferSize_SHIFT (0) -#define DxEPTSIZ_XferSize_GET(_v) (((_v) >> 0) & 0x7ffff) -#define DxEPTSIZ_XferSize_LIMIT (0x7ffff) -#define DxEPTSIZ_XferSize(_x) ((_x) << 0) - -#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) -#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) -#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) - -#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) - -#endif /* __REGS_USB_HSOTG_H */ From f7c0b14351c483bdeb86a81d609e26263cb0dd30 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 14 Apr 2014 14:13:35 -0700 Subject: [PATCH 052/314] usb: dwc2: move s3c-hsotg data structures This patch moves the data structures that are in the s3c-hsotg source into core.h. This is a necessary step towards unifying the s3c-hsotg and dwc2 into a single DRD. Signed-off-by: Dinh Nguyen [ jh,rb,fb - For gadget part only: ] Tested-by: Jingoo Han Tested-by: Robert Baldyga Acked-by: Felipe Balbi [ pz - Tested host part only. ] Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/core.h | 182 ++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc2/gadget.c | 180 +------------------------------------ 2 files changed, 183 insertions(+), 179 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 648519c024b5..1efd10cc9629 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -37,6 +37,10 @@ #ifndef __DWC2_CORE_H__ #define __DWC2_CORE_H__ +#include +#include +#include +#include #include #include "hw.h" @@ -54,6 +58,184 @@ static inline void do_write(u32 value, void *addr) /* Maximum number of Endpoints/HostChannels */ #define MAX_EPS_CHANNELS 16 +/* s3c-hsotg declarations */ +static const char * const s3c_hsotg_supply_names[] = { + "vusb_d", /* digital USB supply, 1.2V */ + "vusb_a", /* analog USB supply, 1.1V */ +}; + +/* + * EP0_MPS_LIMIT + * + * Unfortunately there seems to be a limit of the amount of data that can + * be transferred by IN transactions on EP0. This is either 127 bytes or 3 + * packets (which practically means 1 packet and 63 bytes of data) when the + * MPS is set to 64. + * + * This means if we are wanting to move >127 bytes of data, we need to + * split the transactions up, but just doing one packet at a time does + * not work (this may be an implicit DATA0 PID on first packet of the + * transaction) and doing 2 packets is outside the controller's limits. + * + * If we try to lower the MPS size for EP0, then no transfers work properly + * for EP0, and the system will fail basic enumeration. As no cause for this + * has currently been found, we cannot support any large IN transfers for + * EP0. + */ +#define EP0_MPS_LIMIT 64 + +struct s3c_hsotg; +struct s3c_hsotg_req; + +/** + * struct s3c_hsotg_ep - driver endpoint definition. + * @ep: The gadget layer representation of the endpoint. + * @name: The driver generated name for the endpoint. + * @queue: Queue of requests for this endpoint. + * @parent: Reference back to the parent device structure. + * @req: The current request that the endpoint is processing. This is + * used to indicate an request has been loaded onto the endpoint + * and has yet to be completed (maybe due to data move, or simply + * awaiting an ack from the core all the data has been completed). + * @debugfs: File entry for debugfs file for this endpoint. + * @lock: State lock to protect contents of endpoint. + * @dir_in: Set to true if this endpoint is of the IN direction, which + * means that it is sending data to the Host. + * @index: The index for the endpoint registers. + * @mc: Multi Count - number of transactions per microframe + * @interval - Interval for periodic endpoints + * @name: The name array passed to the USB core. + * @halted: Set if the endpoint has been halted. + * @periodic: Set if this is a periodic ep, such as Interrupt + * @isochronous: Set if this is a isochronous ep + * @sent_zlp: Set if we've sent a zero-length packet. + * @total_data: The total number of data bytes done. + * @fifo_size: The size of the FIFO (for periodic IN endpoints) + * @fifo_load: The amount of data loaded into the FIFO (periodic IN) + * @last_load: The offset of data for the last start of request. + * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN + * + * This is the driver's state for each registered enpoint, allowing it + * to keep track of transactions that need doing. Each endpoint has a + * lock to protect the state, to try and avoid using an overall lock + * for the host controller as much as possible. + * + * For periodic IN endpoints, we have fifo_size and fifo_load to try + * and keep track of the amount of data in the periodic FIFO for each + * of these as we don't have a status register that tells us how much + * is in each of them. (note, this may actually be useless information + * as in shared-fifo mode periodic in acts like a single-frame packet + * buffer than a fifo) + */ +struct s3c_hsotg_ep { + struct usb_ep ep; + struct list_head queue; + struct s3c_hsotg *parent; + struct s3c_hsotg_req *req; + struct dentry *debugfs; + + unsigned long total_data; + unsigned int size_loaded; + unsigned int last_load; + unsigned int fifo_load; + unsigned short fifo_size; + + unsigned char dir_in; + unsigned char index; + unsigned char mc; + unsigned char interval; + + unsigned int halted:1; + unsigned int periodic:1; + unsigned int isochronous:1; + unsigned int sent_zlp:1; + + char name[10]; +}; + +/** + * struct s3c_hsotg - driver state. + * @dev: The parent device supplied to the probe function + * @driver: USB gadget driver + * @phy: The otg phy transceiver structure for phy control. + * @uphy: The otg phy transceiver structure for old USB phy control. + * @plat: The platform specific configuration data. This can be removed once + * all SoCs support usb transceiver. + * @regs: The memory area mapped for accessing registers. + * @irq: The IRQ number we are using + * @supplies: Definition of USB power supplies + * @phyif: PHY interface width + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) + * @debug_root: root directrory for debugfs. + * @debug_file: main status file for debugfs. + * @debug_fifo: FIFO status file for debugfs. + * @ep0_reply: Request used for ep0 reply. + * @ep0_buff: Buffer for EP0 reply data, if needed. + * @ctrl_buff: Buffer for EP0 control requests. + * @ctrl_req: Request for EP0 control packets. + * @setup: NAK management for EP0 SETUP + * @last_rst: Time of last reset + * @eps: The endpoints being supplied to the gadget framework + */ +struct s3c_hsotg { + struct device *dev; + struct usb_gadget_driver *driver; + struct phy *phy; + struct usb_phy *uphy; + struct s3c_hsotg_plat *plat; + + spinlock_t lock; + + void __iomem *regs; + int irq; + struct clk *clk; + + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + + u32 phyif; + unsigned int dedicated_fifos:1; + unsigned char num_of_eps; + + struct dentry *debug_root; + struct dentry *debug_file; + struct dentry *debug_fifo; + + struct usb_request *ep0_reply; + struct usb_request *ctrl_req; + u8 ep0_buff[8]; + u8 ctrl_buff[8]; + + struct usb_gadget gadget; + unsigned int setup; + unsigned long last_rst; + struct s3c_hsotg_ep *eps; +}; + +/** + * struct s3c_hsotg_req - data transfer request + * @req: The USB gadget request + * @queue: The list of requests for the endpoint this is queued for. + * @in_progress: Has already had size/packets written to core + * @mapped: DMA buffer for this request has been mapped via dma_map_single(). + */ +struct s3c_hsotg_req { + struct usb_request req; + struct list_head queue; + unsigned char in_progress; + unsigned char mapped; +}; + +#define call_gadget(_hs, _entry) \ +do { \ + if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ + (_hs)->driver && (_hs)->driver->_entry) { \ + spin_unlock(&_hs->lock); \ + (_hs)->driver->_entry(&(_hs)->gadget); \ + spin_lock(&_hs->lock); \ + } \ +} while (0) + struct dwc2_hsotg; struct dwc2_host_chan; diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index a8db29e54320..dc0faee031fb 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -37,175 +37,7 @@ #include #include -#include "hw.h" - -static const char * const s3c_hsotg_supply_names[] = { - "vusb_d", /* digital USB supply, 1.2V */ - "vusb_a", /* analog USB supply, 1.1V */ -}; - -/* - * EP0_MPS_LIMIT - * - * Unfortunately there seems to be a limit of the amount of data that can - * be transferred by IN transactions on EP0. This is either 127 bytes or 3 - * packets (which practically means 1 packet and 63 bytes of data) when the - * MPS is set to 64. - * - * This means if we are wanting to move >127 bytes of data, we need to - * split the transactions up, but just doing one packet at a time does - * not work (this may be an implicit DATA0 PID on first packet of the - * transaction) and doing 2 packets is outside the controller's limits. - * - * If we try to lower the MPS size for EP0, then no transfers work properly - * for EP0, and the system will fail basic enumeration. As no cause for this - * has currently been found, we cannot support any large IN transfers for - * EP0. - */ -#define EP0_MPS_LIMIT 64 - -struct s3c_hsotg; -struct s3c_hsotg_req; - -/** - * struct s3c_hsotg_ep - driver endpoint definition. - * @ep: The gadget layer representation of the endpoint. - * @name: The driver generated name for the endpoint. - * @queue: Queue of requests for this endpoint. - * @parent: Reference back to the parent device structure. - * @req: The current request that the endpoint is processing. This is - * used to indicate an request has been loaded onto the endpoint - * and has yet to be completed (maybe due to data move, or simply - * awaiting an ack from the core all the data has been completed). - * @debugfs: File entry for debugfs file for this endpoint. - * @lock: State lock to protect contents of endpoint. - * @dir_in: Set to true if this endpoint is of the IN direction, which - * means that it is sending data to the Host. - * @index: The index for the endpoint registers. - * @mc: Multi Count - number of transactions per microframe - * @interval - Interval for periodic endpoints - * @name: The name array passed to the USB core. - * @halted: Set if the endpoint has been halted. - * @periodic: Set if this is a periodic ep, such as Interrupt - * @isochronous: Set if this is a isochronous ep - * @sent_zlp: Set if we've sent a zero-length packet. - * @total_data: The total number of data bytes done. - * @fifo_size: The size of the FIFO (for periodic IN endpoints) - * @fifo_load: The amount of data loaded into the FIFO (periodic IN) - * @last_load: The offset of data for the last start of request. - * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN - * - * This is the driver's state for each registered enpoint, allowing it - * to keep track of transactions that need doing. Each endpoint has a - * lock to protect the state, to try and avoid using an overall lock - * for the host controller as much as possible. - * - * For periodic IN endpoints, we have fifo_size and fifo_load to try - * and keep track of the amount of data in the periodic FIFO for each - * of these as we don't have a status register that tells us how much - * is in each of them. (note, this may actually be useless information - * as in shared-fifo mode periodic in acts like a single-frame packet - * buffer than a fifo) - */ -struct s3c_hsotg_ep { - struct usb_ep ep; - struct list_head queue; - struct s3c_hsotg *parent; - struct s3c_hsotg_req *req; - struct dentry *debugfs; - - - unsigned long total_data; - unsigned int size_loaded; - unsigned int last_load; - unsigned int fifo_load; - unsigned short fifo_size; - - unsigned char dir_in; - unsigned char index; - unsigned char mc; - unsigned char interval; - - unsigned int halted:1; - unsigned int periodic:1; - unsigned int isochronous:1; - unsigned int sent_zlp:1; - - char name[10]; -}; - -/** - * struct s3c_hsotg - driver state. - * @dev: The parent device supplied to the probe function - * @driver: USB gadget driver - * @phy: The otg phy transceiver structure for phy control. - * @uphy: The otg phy transceiver structure for old USB phy control. - * @plat: The platform specific configuration data. This can be removed once - * all SoCs support usb transceiver. - * @regs: The memory area mapped for accessing registers. - * @irq: The IRQ number we are using - * @supplies: Definition of USB power supplies - * @phyif: PHY interface width - * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. - * @num_of_eps: Number of available EPs (excluding EP0) - * @debug_root: root directrory for debugfs. - * @debug_file: main status file for debugfs. - * @debug_fifo: FIFO status file for debugfs. - * @ep0_reply: Request used for ep0 reply. - * @ep0_buff: Buffer for EP0 reply data, if needed. - * @ctrl_buff: Buffer for EP0 control requests. - * @ctrl_req: Request for EP0 control packets. - * @setup: NAK management for EP0 SETUP - * @last_rst: Time of last reset - * @eps: The endpoints being supplied to the gadget framework - */ -struct s3c_hsotg { - struct device *dev; - struct usb_gadget_driver *driver; - struct phy *phy; - struct usb_phy *uphy; - struct s3c_hsotg_plat *plat; - - spinlock_t lock; - - void __iomem *regs; - int irq; - struct clk *clk; - - struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; - - u32 phyif; - unsigned int dedicated_fifos:1; - unsigned char num_of_eps; - - struct dentry *debug_root; - struct dentry *debug_file; - struct dentry *debug_fifo; - - struct usb_request *ep0_reply; - struct usb_request *ctrl_req; - u8 ep0_buff[8]; - u8 ctrl_buff[8]; - - struct usb_gadget gadget; - unsigned int setup; - unsigned long last_rst; - struct s3c_hsotg_ep *eps; -}; - -/** - * struct s3c_hsotg_req - data transfer request - * @req: The USB gadget request - * @queue: The list of requests for the endpoint this is queued for. - * @in_progress: Has already had size/packets written to core - * @mapped: DMA buffer for this request has been mapped via dma_map_single(). - */ -struct s3c_hsotg_req { - struct usb_request req; - struct list_head queue; - unsigned char in_progress; - unsigned char mapped; -}; +#include "core.h" /* conversion functions */ static inline struct s3c_hsotg_req *our_req(struct usb_request *req) @@ -2166,16 +1998,6 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, s3c_hsotg_txfifo_flush(hsotg, ep->index); } -#define call_gadget(_hs, _entry) \ -do { \ - if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ - (_hs)->driver && (_hs)->driver->_entry) { \ - spin_unlock(&_hs->lock); \ - (_hs)->driver->_entry(&(_hs)->gadget); \ - spin_lock(&_hs->lock); \ - } \ -} while (0) - /** * s3c_hsotg_disconnect - disconnect service * @hsotg: The device state. From 90ba4f79198e2da11e94d66f6c67cf7cbaf868ac Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 4 Apr 2014 15:16:03 -0700 Subject: [PATCH 053/314] usb: ftdi-elan: Fix format fragments Breaking formats into fragments with a split between % and field types should be coalesced. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index a4a3c7cd4a11..314e5974c723 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -729,8 +729,8 @@ static void ftdi_elan_write_bulk_callback(struct urb *urb) if (status && !(status == -ENOENT || status == -ECONNRESET || status == -ESHUTDOWN)) { - dev_err(&ftdi->udev->dev, "urb=%p write bulk status received: %" - "d\n", urb, status); + dev_err(&ftdi->udev->dev, + "urb=%p write bulk status received: %d\n", urb, status); } usb_free_coherent(urb->dev, urb->transfer_buffer_length, urb->transfer_buffer, urb->transfer_dma); @@ -1181,8 +1181,8 @@ static ssize_t ftdi_elan_write(struct file *file, urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - dev_err(&ftdi->udev->dev, "failed submitting write urb, error %" - "d\n", retval); + dev_err(&ftdi->udev->dev, + "failed submitting write urb, error %d\n", retval); goto error_3; } usb_free_urb(urb); From 8dae693ca9f7337058dc564fb88b13e1e9358e37 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 4 Apr 2014 15:16:04 -0700 Subject: [PATCH 054/314] usb: ftdi-elan: Convert leading spaces to tabs Use tabs for indentation. Use a more normal kernel comment style (align multiline *'s) git diff -w shows no differences Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 4870 +++++++++++++++++----------------- 1 file changed, 2435 insertions(+), 2435 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 314e5974c723..0487f8e1e817 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -1,40 +1,40 @@ /* -* USB FTDI client driver for Elan Digital Systems's Uxxx adapters -* -* Copyright(C) 2006 Elan Digital Systems Limited -* http://www.elandigitalsystems.com -* -* Author and Maintainer - Tony Olech - Elan Digital Systems -* tony.olech@elandigitalsystems.com -* -* This program is free software;you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation, version 2. -* -* -* This driver was written by Tony Olech(tony.olech@elandigitalsystems.com) -* based on various USB client drivers in the 2.6.15 linux kernel -* with constant reference to the 3rd Edition of Linux Device Drivers -* published by O'Reilly -* -* The U132 adapter is a USB to CardBus adapter specifically designed -* for PC cards that contain an OHCI host controller. Typical PC cards -* are the Orange Mobile 3G Option GlobeTrotter Fusion card. -* -* The U132 adapter will *NOT *work with PC cards that do not contain -* an OHCI controller. A simple way to test whether a PC card has an -* OHCI controller as an interface is to insert the PC card directly -* into a laptop(or desktop) with a CardBus slot and if "lspci" shows -* a new USB controller and "lsusb -v" shows a new OHCI Host Controller -* then there is a good chance that the U132 adapter will support the -* PC card.(you also need the specific client driver for the PC card) -* -* Please inform the Author and Maintainer about any PC cards that -* contain OHCI Host Controller and work when directly connected to -* an embedded CardBus slot but do not work when they are connected -* via an ELAN U132 adapter. -* -*/ + * USB FTDI client driver for Elan Digital Systems's Uxxx adapters + * + * Copyright(C) 2006 Elan Digital Systems Limited + * http://www.elandigitalsystems.com + * + * Author and Maintainer - Tony Olech - Elan Digital Systems + * tony.olech@elandigitalsystems.com + * + * This program is free software;you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * + * This driver was written by Tony Olech(tony.olech@elandigitalsystems.com) + * based on various USB client drivers in the 2.6.15 linux kernel + * with constant reference to the 3rd Edition of Linux Device Drivers + * published by O'Reilly + * + * The U132 adapter is a USB to CardBus adapter specifically designed + * for PC cards that contain an OHCI host controller. Typical PC cards + * are the Orange Mobile 3G Option GlobeTrotter Fusion card. + * + * The U132 adapter will *NOT *work with PC cards that do not contain + * an OHCI controller. A simple way to test whether a PC card has an + * OHCI controller as an interface is to insert the PC card directly + * into a laptop(or desktop) with a CardBus slot and if "lspci" shows + * a new USB controller and "lsusb -v" shows a new OHCI Host Controller + * then there is a good chance that the U132 adapter will support the + * PC card.(you also need the specific client driver for the PC card) + * + * Please inform the Author and Maintainer about any PC cards that + * contain OHCI Host Controller and work when directly connected to + * an embedded CardBus slot but do not work when they are connected + * via an ELAN U132 adapter. + * + */ #include #include #include @@ -56,30 +56,30 @@ MODULE_LICENSE("GPL"); static bool distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" - "t setup"); + "t setup"); extern struct platform_driver u132_platform_driver; static struct workqueue_struct *status_queue; static struct workqueue_struct *command_queue; static struct workqueue_struct *respond_queue; /* -* ftdi_module_lock exists to protect access to global variables -* -*/ + * ftdi_module_lock exists to protect access to global variables + * + */ static struct mutex ftdi_module_lock; static int ftdi_instances = 0; static struct list_head ftdi_static_list; /* -* end of the global variables protected by ftdi_module_lock -*/ + * end of the global variables protected by ftdi_module_lock + */ #include "usb_u132.h" #include #include - /* FIXME ohci.h is ONLY for internal use by the OHCI driver. - * If you're going to try stuff like this, you need to split - * out shareable stuff (register declarations?) into its own - * file, maybe name - */ +/* FIXME ohci.h is ONLY for internal use by the OHCI driver. + * If you're going to try stuff like this, you need to split + * out shareable stuff (register declarations?) into its own + * file, maybe name + */ #include "../host/ohci.h" /* Define these values to match your devices*/ @@ -87,140 +87,140 @@ static struct list_head ftdi_static_list; #define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea /* table of devices that work with this driver*/ static const struct usb_device_id ftdi_elan_table[] = { - {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)}, - { /* Terminating entry */ } + {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)}, + { /* Terminating entry */ } }; MODULE_DEVICE_TABLE(usb, ftdi_elan_table); /* only the jtag(firmware upgrade device) interface requires -* a device file and corresponding minor number, but the -* interface is created unconditionally - I suppose it could -* be configured or not according to a module parameter. -* But since we(now) require one interface per device, -* and since it unlikely that a normal installation would -* require more than a couple of elan-ftdi devices, 8 seems -* like a reasonable limit to have here, and if someone -* really requires more than 8 devices, then they can frig the -* code and recompile -*/ + * a device file and corresponding minor number, but the + * interface is created unconditionally - I suppose it could + * be configured or not according to a module parameter. + * But since we(now) require one interface per device, + * and since it unlikely that a normal installation would + * require more than a couple of elan-ftdi devices, 8 seems + * like a reasonable limit to have here, and if someone + * really requires more than 8 devices, then they can frig the + * code and recompile + */ #define USB_FTDI_ELAN_MINOR_BASE 192 #define COMMAND_BITS 5 #define COMMAND_SIZE (1<udev->dev, "FREEING ftdi=%p\n", ftdi); - usb_put_dev(ftdi->udev); - ftdi->disconnected += 1; - mutex_lock(&ftdi_module_lock); - list_del_init(&ftdi->ftdi_list); - ftdi_instances -= 1; - mutex_unlock(&ftdi_module_lock); - kfree(ftdi->bulk_in_buffer); - ftdi->bulk_in_buffer = NULL; + struct usb_ftdi *ftdi = kref_to_usb_ftdi(kref); + dev_warn(&ftdi->udev->dev, "FREEING ftdi=%p\n", ftdi); + usb_put_dev(ftdi->udev); + ftdi->disconnected += 1; + mutex_lock(&ftdi_module_lock); + list_del_init(&ftdi->ftdi_list); + ftdi_instances -= 1; + mutex_unlock(&ftdi_module_lock); + kfree(ftdi->bulk_in_buffer); + ftdi->bulk_in_buffer = NULL; } static void ftdi_elan_put_kref(struct usb_ftdi *ftdi) { - kref_put(&ftdi->kref, ftdi_elan_delete); + kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_elan_get_kref(struct usb_ftdi *ftdi) { - kref_get(&ftdi->kref); + kref_get(&ftdi->kref); } static void ftdi_elan_init_kref(struct usb_ftdi *ftdi) { - kref_init(&ftdi->kref); + kref_init(&ftdi->kref); } static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) @@ -237,8 +237,8 @@ static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta) static void ftdi_status_cancel_work(struct usb_ftdi *ftdi) { - if (cancel_delayed_work(&ftdi->status_work)) - kref_put(&ftdi->kref, ftdi_elan_delete); + if (cancel_delayed_work(&ftdi->status_work)) + kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta) @@ -255,12 +255,12 @@ static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta) static void ftdi_command_cancel_work(struct usb_ftdi *ftdi) { - if (cancel_delayed_work(&ftdi->command_work)) - kref_put(&ftdi->kref, ftdi_elan_delete); + if (cancel_delayed_work(&ftdi->command_work)) + kref_put(&ftdi->kref, ftdi_elan_delete); } static void ftdi_response_requeue_work(struct usb_ftdi *ftdi, - unsigned int delta) + unsigned int delta) { if (!queue_delayed_work(respond_queue, &ftdi->respond_work, delta)) kref_put(&ftdi->kref, ftdi_elan_delete); @@ -274,26 +274,26 @@ static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta) static void ftdi_response_cancel_work(struct usb_ftdi *ftdi) { - if (cancel_delayed_work(&ftdi->respond_work)) - kref_put(&ftdi->kref, ftdi_elan_delete); + if (cancel_delayed_work(&ftdi->respond_work)) + kref_put(&ftdi->kref, ftdi_elan_delete); } void ftdi_elan_gone_away(struct platform_device *pdev) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - ftdi->gone_away += 1; - ftdi_elan_put_kref(ftdi); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + ftdi->gone_away += 1; + ftdi_elan_put_kref(ftdi); } EXPORT_SYMBOL_GPL(ftdi_elan_gone_away); static void ftdi_release_platform_dev(struct device *dev) { - dev->parent = NULL; + dev->parent = NULL; } static void ftdi_elan_do_callback(struct usb_ftdi *ftdi, - struct u132_target *target, u8 *buffer, int length); + struct u132_target *target, u8 *buffer, int length); static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi); static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi); static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi); @@ -305,421 +305,421 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi); static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi); static int ftdi_elan_hcd_init(struct usb_ftdi *ftdi) { - int result; - if (ftdi->platform_dev.dev.parent) - return -EBUSY; - ftdi_elan_get_kref(ftdi); - ftdi->platform_data.potpg = 100; - ftdi->platform_data.reset = NULL; - ftdi->platform_dev.id = ftdi->sequence_num; - ftdi->platform_dev.resource = ftdi->resources; - ftdi->platform_dev.num_resources = ARRAY_SIZE(ftdi->resources); - ftdi->platform_dev.dev.platform_data = &ftdi->platform_data; - ftdi->platform_dev.dev.parent = NULL; - ftdi->platform_dev.dev.release = ftdi_release_platform_dev; - ftdi->platform_dev.dev.dma_mask = NULL; - snprintf(ftdi->device_name, sizeof(ftdi->device_name), "u132_hcd"); - ftdi->platform_dev.name = ftdi->device_name; - dev_info(&ftdi->udev->dev, "requesting module '%s'\n", "u132_hcd"); - request_module("u132_hcd"); - dev_info(&ftdi->udev->dev, "registering '%s'\n", - ftdi->platform_dev.name); - result = platform_device_register(&ftdi->platform_dev); - return result; + int result; + if (ftdi->platform_dev.dev.parent) + return -EBUSY; + ftdi_elan_get_kref(ftdi); + ftdi->platform_data.potpg = 100; + ftdi->platform_data.reset = NULL; + ftdi->platform_dev.id = ftdi->sequence_num; + ftdi->platform_dev.resource = ftdi->resources; + ftdi->platform_dev.num_resources = ARRAY_SIZE(ftdi->resources); + ftdi->platform_dev.dev.platform_data = &ftdi->platform_data; + ftdi->platform_dev.dev.parent = NULL; + ftdi->platform_dev.dev.release = ftdi_release_platform_dev; + ftdi->platform_dev.dev.dma_mask = NULL; + snprintf(ftdi->device_name, sizeof(ftdi->device_name), "u132_hcd"); + ftdi->platform_dev.name = ftdi->device_name; + dev_info(&ftdi->udev->dev, "requesting module '%s'\n", "u132_hcd"); + request_module("u132_hcd"); + dev_info(&ftdi->udev->dev, "registering '%s'\n", + ftdi->platform_dev.name); + result = platform_device_register(&ftdi->platform_dev); + return result; } static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi) { - mutex_lock(&ftdi->u132_lock); - while (ftdi->respond_next > ftdi->respond_head) { - struct u132_respond *respond = &ftdi->respond[RESPOND_MASK & - ftdi->respond_head++]; - *respond->result = -ESHUTDOWN; - *respond->value = 0; - complete(&respond->wait_completion); - } mutex_unlock(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); + while (ftdi->respond_next > ftdi->respond_head) { + struct u132_respond *respond = &ftdi->respond[RESPOND_MASK & + ftdi->respond_head++]; + *respond->result = -ESHUTDOWN; + *respond->value = 0; + complete(&respond->wait_completion); + } mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi) { - int ed_number = 4; - mutex_lock(&ftdi->u132_lock); - while (ed_number-- > 0) { - struct u132_target *target = &ftdi->target[ed_number]; - if (target->active == 1) { - target->condition_code = TD_DEVNOTRESP; - mutex_unlock(&ftdi->u132_lock); - ftdi_elan_do_callback(ftdi, target, NULL, 0); - mutex_lock(&ftdi->u132_lock); - } - } - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - mutex_unlock(&ftdi->u132_lock); + int ed_number = 4; + mutex_lock(&ftdi->u132_lock); + while (ed_number-- > 0) { + struct u132_target *target = &ftdi->target[ed_number]; + if (target->active == 1) { + target->condition_code = TD_DEVNOTRESP; + mutex_unlock(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, NULL, 0); + mutex_lock(&ftdi->u132_lock); + } + } + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi) { - int ed_number = 4; - mutex_lock(&ftdi->u132_lock); - while (ed_number-- > 0) { - struct u132_target *target = &ftdi->target[ed_number]; - target->abandoning = 1; - wait_1:if (target->active == 1) { - int command_size = ftdi->command_next - - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x80 | (ed_number << 5) | 0x4; - command->length = 0x00; - command->address = 0x00; - command->width = 0x00; - command->follows = 0; - command->value = 0; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - mutex_lock(&ftdi->u132_lock); - goto wait_1; - } - } - wait_2:if (target->active == 1) { - int command_size = ftdi->command_next - - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x90 | (ed_number << 5); - command->length = 0x00; - command->address = 0x00; - command->width = 0x00; - command->follows = 0; - command->value = 0; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - mutex_lock(&ftdi->u132_lock); - goto wait_2; - } - } - } - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - mutex_unlock(&ftdi->u132_lock); + int ed_number = 4; + mutex_lock(&ftdi->u132_lock); + while (ed_number-- > 0) { + struct u132_target *target = &ftdi->target[ed_number]; + target->abandoning = 1; + wait_1:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x80 | (ed_number << 5) | 0x4; + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + mutex_lock(&ftdi->u132_lock); + goto wait_1; + } + } + wait_2:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x90 | (ed_number << 5); + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + mutex_lock(&ftdi->u132_lock); + goto wait_2; + } + } + } + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) { - int ed_number = 4; - mutex_lock(&ftdi->u132_lock); - while (ed_number-- > 0) { - struct u132_target *target = &ftdi->target[ed_number]; - target->abandoning = 1; - wait:if (target->active == 1) { - int command_size = ftdi->command_next - - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x80 | (ed_number << 5) | 0x4; - command->length = 0x00; - command->address = 0x00; - command->width = 0x00; - command->follows = 0; - command->value = 0; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - mutex_lock(&ftdi->u132_lock); - goto wait; - } - } - } - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - mutex_unlock(&ftdi->u132_lock); + int ed_number = 4; + mutex_lock(&ftdi->u132_lock); + while (ed_number-- > 0) { + struct u132_target *target = &ftdi->target[ed_number]; + target->abandoning = 1; + wait:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x80 | (ed_number << 5) | 0x4; + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + mutex_lock(&ftdi->u132_lock); + goto wait; + } + } + } + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi) { - ftdi_command_queue_work(ftdi, 0); + ftdi_command_queue_work(ftdi, 0); } static void ftdi_elan_command_work(struct work_struct *work) { - struct usb_ftdi *ftdi = + struct usb_ftdi *ftdi = container_of(work, struct usb_ftdi, command_work.work); - if (ftdi->disconnected > 0) { - ftdi_elan_put_kref(ftdi); - return; - } else { - int retval = ftdi_elan_command_engine(ftdi); - if (retval == -ESHUTDOWN) { - ftdi->disconnected += 1; - } else if (retval == -ENODEV) { - ftdi->disconnected += 1; - } else if (retval) - dev_err(&ftdi->udev->dev, "command error %d\n", retval); - ftdi_command_requeue_work(ftdi, msecs_to_jiffies(10)); - return; - } + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else { + int retval = ftdi_elan_command_engine(ftdi); + if (retval == -ESHUTDOWN) { + ftdi->disconnected += 1; + } else if (retval == -ENODEV) { + ftdi->disconnected += 1; + } else if (retval) + dev_err(&ftdi->udev->dev, "command error %d\n", retval); + ftdi_command_requeue_work(ftdi, msecs_to_jiffies(10)); + return; + } } static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi) { - ftdi_respond_queue_work(ftdi, 0); + ftdi_respond_queue_work(ftdi, 0); } static void ftdi_elan_respond_work(struct work_struct *work) { - struct usb_ftdi *ftdi = + struct usb_ftdi *ftdi = container_of(work, struct usb_ftdi, respond_work.work); - if (ftdi->disconnected > 0) { - ftdi_elan_put_kref(ftdi); - return; - } else { - int retval = ftdi_elan_respond_engine(ftdi); - if (retval == 0) { - } else if (retval == -ESHUTDOWN) { - ftdi->disconnected += 1; - } else if (retval == -ENODEV) { - ftdi->disconnected += 1; - } else if (retval == -EILSEQ) { - ftdi->disconnected += 1; - } else { - ftdi->disconnected += 1; - dev_err(&ftdi->udev->dev, "respond error %d\n", retval); - } - if (ftdi->disconnected > 0) { - ftdi_elan_abandon_completions(ftdi); - ftdi_elan_abandon_targets(ftdi); - } - ftdi_response_requeue_work(ftdi, msecs_to_jiffies(10)); - return; - } + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else { + int retval = ftdi_elan_respond_engine(ftdi); + if (retval == 0) { + } else if (retval == -ESHUTDOWN) { + ftdi->disconnected += 1; + } else if (retval == -ENODEV) { + ftdi->disconnected += 1; + } else if (retval == -EILSEQ) { + ftdi->disconnected += 1; + } else { + ftdi->disconnected += 1; + dev_err(&ftdi->udev->dev, "respond error %d\n", retval); + } + if (ftdi->disconnected > 0) { + ftdi_elan_abandon_completions(ftdi); + ftdi_elan_abandon_targets(ftdi); + } + ftdi_response_requeue_work(ftdi, msecs_to_jiffies(10)); + return; + } } /* -* the sw_lock is initially held and will be freed -* after the FTDI has been synchronized -* -*/ + * the sw_lock is initially held and will be freed + * after the FTDI has been synchronized + * + */ static void ftdi_elan_status_work(struct work_struct *work) { - struct usb_ftdi *ftdi = + struct usb_ftdi *ftdi = container_of(work, struct usb_ftdi, status_work.work); - int work_delay_in_msec = 0; - if (ftdi->disconnected > 0) { - ftdi_elan_put_kref(ftdi); - return; - } else if (ftdi->synchronized == 0) { - down(&ftdi->sw_lock); - if (ftdi_elan_synchronize(ftdi) == 0) { - ftdi->synchronized = 1; - ftdi_command_queue_work(ftdi, 1); - ftdi_respond_queue_work(ftdi, 1); - up(&ftdi->sw_lock); - work_delay_in_msec = 100; - } else { - dev_err(&ftdi->udev->dev, "synchronize failed\n"); - up(&ftdi->sw_lock); - work_delay_in_msec = 10 *1000; - } - } else if (ftdi->stuck_status > 0) { - if (ftdi_elan_stuck_waiting(ftdi) == 0) { - ftdi->stuck_status = 0; - ftdi->synchronized = 0; - } else if ((ftdi->stuck_status++ % 60) == 1) { - dev_err(&ftdi->udev->dev, "WRONG type of card inserted " - "- please remove\n"); - } else - dev_err(&ftdi->udev->dev, "WRONG type of card inserted " - "- checked %d times\n", ftdi->stuck_status); - work_delay_in_msec = 100; - } else if (ftdi->enumerated == 0) { - if (ftdi_elan_enumeratePCI(ftdi) == 0) { - ftdi->enumerated = 1; - work_delay_in_msec = 250; - } else - work_delay_in_msec = 1000; - } else if (ftdi->initialized == 0) { - if (ftdi_elan_setupOHCI(ftdi) == 0) { - ftdi->initialized = 1; - work_delay_in_msec = 500; - } else { - dev_err(&ftdi->udev->dev, "initialized failed - trying " - "again in 10 seconds\n"); - work_delay_in_msec = 1 *1000; - } - } else if (ftdi->registered == 0) { - work_delay_in_msec = 10; - if (ftdi_elan_hcd_init(ftdi) == 0) { - ftdi->registered = 1; - } else - dev_err(&ftdi->udev->dev, "register failed\n"); - work_delay_in_msec = 250; - } else { - if (ftdi_elan_checkingPCI(ftdi) == 0) { - work_delay_in_msec = 250; - } else if (ftdi->controlreg & 0x00400000) { - if (ftdi->gone_away > 0) { - dev_err(&ftdi->udev->dev, "PCI device eject con" - "firmed platform_dev.dev.parent=%p plat" - "form_dev.dev=%p\n", - ftdi->platform_dev.dev.parent, - &ftdi->platform_dev.dev); - platform_device_unregister(&ftdi->platform_dev); - ftdi->platform_dev.dev.parent = NULL; - ftdi->registered = 0; - ftdi->enumerated = 0; - ftdi->card_ejected = 0; - ftdi->initialized = 0; - ftdi->gone_away = 0; - } else - ftdi_elan_flush_targets(ftdi); - work_delay_in_msec = 250; - } else { - dev_err(&ftdi->udev->dev, "PCI device has disappeared\n" - ); - ftdi_elan_cancel_targets(ftdi); - work_delay_in_msec = 500; - ftdi->enumerated = 0; - ftdi->initialized = 0; - } - } - if (ftdi->disconnected > 0) { - ftdi_elan_put_kref(ftdi); - return; - } else { - ftdi_status_requeue_work(ftdi, - msecs_to_jiffies(work_delay_in_msec)); - return; - } + int work_delay_in_msec = 0; + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else if (ftdi->synchronized == 0) { + down(&ftdi->sw_lock); + if (ftdi_elan_synchronize(ftdi) == 0) { + ftdi->synchronized = 1; + ftdi_command_queue_work(ftdi, 1); + ftdi_respond_queue_work(ftdi, 1); + up(&ftdi->sw_lock); + work_delay_in_msec = 100; + } else { + dev_err(&ftdi->udev->dev, "synchronize failed\n"); + up(&ftdi->sw_lock); + work_delay_in_msec = 10 *1000; + } + } else if (ftdi->stuck_status > 0) { + if (ftdi_elan_stuck_waiting(ftdi) == 0) { + ftdi->stuck_status = 0; + ftdi->synchronized = 0; + } else if ((ftdi->stuck_status++ % 60) == 1) { + dev_err(&ftdi->udev->dev, "WRONG type of card inserted " + "- please remove\n"); + } else + dev_err(&ftdi->udev->dev, "WRONG type of card inserted " + "- checked %d times\n", ftdi->stuck_status); + work_delay_in_msec = 100; + } else if (ftdi->enumerated == 0) { + if (ftdi_elan_enumeratePCI(ftdi) == 0) { + ftdi->enumerated = 1; + work_delay_in_msec = 250; + } else + work_delay_in_msec = 1000; + } else if (ftdi->initialized == 0) { + if (ftdi_elan_setupOHCI(ftdi) == 0) { + ftdi->initialized = 1; + work_delay_in_msec = 500; + } else { + dev_err(&ftdi->udev->dev, "initialized failed - trying " + "again in 10 seconds\n"); + work_delay_in_msec = 1 *1000; + } + } else if (ftdi->registered == 0) { + work_delay_in_msec = 10; + if (ftdi_elan_hcd_init(ftdi) == 0) { + ftdi->registered = 1; + } else + dev_err(&ftdi->udev->dev, "register failed\n"); + work_delay_in_msec = 250; + } else { + if (ftdi_elan_checkingPCI(ftdi) == 0) { + work_delay_in_msec = 250; + } else if (ftdi->controlreg & 0x00400000) { + if (ftdi->gone_away > 0) { + dev_err(&ftdi->udev->dev, "PCI device eject con" + "firmed platform_dev.dev.parent=%p plat" + "form_dev.dev=%p\n", + ftdi->platform_dev.dev.parent, + &ftdi->platform_dev.dev); + platform_device_unregister(&ftdi->platform_dev); + ftdi->platform_dev.dev.parent = NULL; + ftdi->registered = 0; + ftdi->enumerated = 0; + ftdi->card_ejected = 0; + ftdi->initialized = 0; + ftdi->gone_away = 0; + } else + ftdi_elan_flush_targets(ftdi); + work_delay_in_msec = 250; + } else { + dev_err(&ftdi->udev->dev, "PCI device has disappeared\n" + ); + ftdi_elan_cancel_targets(ftdi); + work_delay_in_msec = 500; + ftdi->enumerated = 0; + ftdi->initialized = 0; + } + } + if (ftdi->disconnected > 0) { + ftdi_elan_put_kref(ftdi); + return; + } else { + ftdi_status_requeue_work(ftdi, + msecs_to_jiffies(work_delay_in_msec)); + return; + } } /* -* file_operations for the jtag interface -* -* the usage count for the device is incremented on open() -* and decremented on release() -*/ + * file_operations for the jtag interface + * + * the usage count for the device is incremented on open() + * and decremented on release() + */ static int ftdi_elan_open(struct inode *inode, struct file *file) { int subminor; struct usb_interface *interface; - subminor = iminor(inode); - interface = usb_find_interface(&ftdi_elan_driver, subminor); + subminor = iminor(inode); + interface = usb_find_interface(&ftdi_elan_driver, subminor); - if (!interface) { - printk(KERN_ERR "can't find device for minor %d\n", subminor); - return -ENODEV; - } else { - struct usb_ftdi *ftdi = usb_get_intfdata(interface); - if (!ftdi) { - return -ENODEV; - } else { - if (down_interruptible(&ftdi->sw_lock)) { - return -EINTR; - } else { - ftdi_elan_get_kref(ftdi); - file->private_data = ftdi; - return 0; - } - } - } + if (!interface) { + printk(KERN_ERR "can't find device for minor %d\n", subminor); + return -ENODEV; + } else { + struct usb_ftdi *ftdi = usb_get_intfdata(interface); + if (!ftdi) { + return -ENODEV; + } else { + if (down_interruptible(&ftdi->sw_lock)) { + return -EINTR; + } else { + ftdi_elan_get_kref(ftdi); + file->private_data = ftdi; + return 0; + } + } + } } static int ftdi_elan_release(struct inode *inode, struct file *file) { - struct usb_ftdi *ftdi = file->private_data; - if (ftdi == NULL) - return -ENODEV; - up(&ftdi->sw_lock); /* decrement the count on our device */ - ftdi_elan_put_kref(ftdi); - return 0; + struct usb_ftdi *ftdi = file->private_data; + if (ftdi == NULL) + return -ENODEV; + up(&ftdi->sw_lock); /* decrement the count on our device */ + ftdi_elan_put_kref(ftdi); + return 0; } /* -* -* blocking bulk reads are used to get data from the device -* -*/ + * + * blocking bulk reads are used to get data from the device + * + */ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { - char data[30 *3 + 4]; - char *d = data; - int m = (sizeof(data) - 1) / 3; - int bytes_read = 0; - int retry_on_empty = 10; - int retry_on_timeout = 5; - struct usb_ftdi *ftdi = file->private_data; - if (ftdi->disconnected > 0) { - return -ENODEV; - } - data[0] = 0; - have:if (ftdi->bulk_in_left > 0) { - if (count-- > 0) { - char *p = ++ftdi->bulk_in_last + ftdi->bulk_in_buffer; - ftdi->bulk_in_left -= 1; - if (bytes_read < m) { - d += sprintf(d, " %02X", 0x000000FF & *p); - } else if (bytes_read > m) { - } else - d += sprintf(d, " .."); - if (copy_to_user(buffer++, p, 1)) { - return -EFAULT; - } else { - bytes_read += 1; - goto have; - } - } else - return bytes_read; - } - more:if (count > 0) { - int packet_bytes = 0; - int retval = usb_bulk_msg(ftdi->udev, - usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), - ftdi->bulk_in_buffer, ftdi->bulk_in_size, - &packet_bytes, 50); - if (packet_bytes > 2) { - ftdi->bulk_in_left = packet_bytes - 2; - ftdi->bulk_in_last = 1; - goto have; - } else if (retval == -ETIMEDOUT) { - if (retry_on_timeout-- > 0) { - goto more; - } else if (bytes_read > 0) { - return bytes_read; - } else - return retval; - } else if (retval == 0) { - if (retry_on_empty-- > 0) { - goto more; - } else - return bytes_read; - } else - return retval; - } else - return bytes_read; + char data[30 *3 + 4]; + char *d = data; + int m = (sizeof(data) - 1) / 3; + int bytes_read = 0; + int retry_on_empty = 10; + int retry_on_timeout = 5; + struct usb_ftdi *ftdi = file->private_data; + if (ftdi->disconnected > 0) { + return -ENODEV; + } + data[0] = 0; +have:if (ftdi->bulk_in_left > 0) { + if (count-- > 0) { + char *p = ++ftdi->bulk_in_last + ftdi->bulk_in_buffer; + ftdi->bulk_in_left -= 1; + if (bytes_read < m) { + d += sprintf(d, " %02X", 0x000000FF & *p); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + if (copy_to_user(buffer++, p, 1)) { + return -EFAULT; + } else { + bytes_read += 1; + goto have; + } + } else + return bytes_read; + } +more:if (count > 0) { + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, 50); + if (packet_bytes > 2) { + ftdi->bulk_in_left = packet_bytes - 2; + ftdi->bulk_in_last = 1; + goto have; + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto more; + } else if (bytes_read > 0) { + return bytes_read; + } else + return retval; + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto more; + } else + return bytes_read; + } else + return retval; + } else + return bytes_read; } static void ftdi_elan_write_bulk_callback(struct urb *urb) @@ -728,467 +728,467 @@ static void ftdi_elan_write_bulk_callback(struct urb *urb) int status = urb->status; if (status && !(status == -ENOENT || status == -ECONNRESET || - status == -ESHUTDOWN)) { + status == -ESHUTDOWN)) { dev_err(&ftdi->udev->dev, "urb=%p write bulk status received: %d\n", urb, status); - } - usb_free_coherent(urb->dev, urb->transfer_buffer_length, - urb->transfer_buffer, urb->transfer_dma); + } + usb_free_coherent(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); } static int fill_buffer_with_all_queued_commands(struct usb_ftdi *ftdi, - char *buf, int command_size, int total_size) + char *buf, int command_size, int total_size) { - int ed_commands = 0; - int b = 0; - int I = command_size; - int i = ftdi->command_head; - while (I-- > 0) { - struct u132_command *command = &ftdi->command[COMMAND_MASK & - i++]; - int F = command->follows; - u8 *f = command->buffer; - if (command->header & 0x80) { - ed_commands |= 1 << (0x3 & (command->header >> 5)); - } - buf[b++] = command->header; - buf[b++] = (command->length >> 0) & 0x00FF; - buf[b++] = (command->length >> 8) & 0x00FF; - buf[b++] = command->address; - buf[b++] = command->width; - while (F-- > 0) { - buf[b++] = *f++; - } - } - return ed_commands; + int ed_commands = 0; + int b = 0; + int I = command_size; + int i = ftdi->command_head; + while (I-- > 0) { + struct u132_command *command = &ftdi->command[COMMAND_MASK & + i++]; + int F = command->follows; + u8 *f = command->buffer; + if (command->header & 0x80) { + ed_commands |= 1 << (0x3 & (command->header >> 5)); + } + buf[b++] = command->header; + buf[b++] = (command->length >> 0) & 0x00FF; + buf[b++] = (command->length >> 8) & 0x00FF; + buf[b++] = command->address; + buf[b++] = command->width; + while (F-- > 0) { + buf[b++] = *f++; + } + } + return ed_commands; } static int ftdi_elan_total_command_size(struct usb_ftdi *ftdi, int command_size) { - int total_size = 0; - int I = command_size; - int i = ftdi->command_head; - while (I-- > 0) { - struct u132_command *command = &ftdi->command[COMMAND_MASK & - i++]; - total_size += 5 + command->follows; - } return total_size; + int total_size = 0; + int I = command_size; + int i = ftdi->command_head; + while (I-- > 0) { + struct u132_command *command = &ftdi->command[COMMAND_MASK & + i++]; + total_size += 5 + command->follows; + } return total_size; } static int ftdi_elan_command_engine(struct usb_ftdi *ftdi) { - int retval; - char *buf; - int ed_commands; - int total_size; - struct urb *urb; - int command_size = ftdi->command_next - ftdi->command_head; - if (command_size == 0) - return 0; - total_size = ftdi_elan_total_command_size(ftdi, command_size); - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&ftdi->udev->dev, "could not get a urb to write %d comm" - "ands totaling %d bytes to the Uxxx\n", command_size, - total_size); - return -ENOMEM; - } - buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL, - &urb->transfer_dma); - if (!buf) { - dev_err(&ftdi->udev->dev, "could not get a buffer to write %d c" - "ommands totaling %d bytes to the Uxxx\n", command_size, - total_size); - usb_free_urb(urb); - return -ENOMEM; - } - ed_commands = fill_buffer_with_all_queued_commands(ftdi, buf, - command_size, total_size); - usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, - ftdi->bulk_out_endpointAddr), buf, total_size, - ftdi_elan_write_bulk_callback, ftdi); - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - if (ed_commands) { - char diag[40 *3 + 4]; - char *d = diag; - int m = total_size; - u8 *c = buf; - int s = (sizeof(diag) - 1) / 3; - diag[0] = 0; - while (s-- > 0 && m-- > 0) { - if (s > 0 || m == 0) { - d += sprintf(d, " %02X", *c++); - } else - d += sprintf(d, " .."); - } - } - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write " - "%d commands totaling %d bytes to the Uxxx\n", retval, - urb, command_size, total_size); - usb_free_coherent(ftdi->udev, total_size, buf, urb->transfer_dma); - usb_free_urb(urb); - return retval; - } - usb_free_urb(urb); /* release our reference to this urb, - the USB core will eventually free it entirely */ - ftdi->command_head += command_size; - ftdi_elan_kick_respond_queue(ftdi); - return 0; + int retval; + char *buf; + int ed_commands; + int total_size; + struct urb *urb; + int command_size = ftdi->command_next - ftdi->command_head; + if (command_size == 0) + return 0; + total_size = ftdi_elan_total_command_size(ftdi, command_size); + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&ftdi->udev->dev, "could not get a urb to write %d comm" + "ands totaling %d bytes to the Uxxx\n", command_size, + total_size); + return -ENOMEM; + } + buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + dev_err(&ftdi->udev->dev, "could not get a buffer to write %d c" + "ommands totaling %d bytes to the Uxxx\n", command_size, + total_size); + usb_free_urb(urb); + return -ENOMEM; + } + ed_commands = fill_buffer_with_all_queued_commands(ftdi, buf, + command_size, total_size); + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, total_size, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (ed_commands) { + char diag[40 *3 + 4]; + char *d = diag; + int m = total_size; + u8 *c = buf; + int s = (sizeof(diag) - 1) / 3; + diag[0] = 0; + while (s-- > 0 && m-- > 0) { + if (s > 0 || m == 0) { + d += sprintf(d, " %02X", *c++); + } else + d += sprintf(d, " .."); + } + } + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write " + "%d commands totaling %d bytes to the Uxxx\n", retval, + urb, command_size, total_size); + usb_free_coherent(ftdi->udev, total_size, buf, urb->transfer_dma); + usb_free_urb(urb); + return retval; + } + usb_free_urb(urb); /* release our reference to this urb, + the USB core will eventually free it entirely */ + ftdi->command_head += command_size; + ftdi_elan_kick_respond_queue(ftdi); + return 0; } static void ftdi_elan_do_callback(struct usb_ftdi *ftdi, - struct u132_target *target, u8 *buffer, int length) + struct u132_target *target, u8 *buffer, int length) { - struct urb *urb = target->urb; - int halted = target->halted; - int skipped = target->skipped; - int actual = target->actual; - int non_null = target->non_null; - int toggle_bits = target->toggle_bits; - int error_count = target->error_count; - int condition_code = target->condition_code; - int repeat_number = target->repeat_number; - void (*callback) (void *, struct urb *, u8 *, int, int, int, int, int, - int, int, int, int) = target->callback; - target->active -= 1; - target->callback = NULL; - (*callback) (target->endp, urb, buffer, length, toggle_bits, - error_count, condition_code, repeat_number, halted, skipped, - actual, non_null); + struct urb *urb = target->urb; + int halted = target->halted; + int skipped = target->skipped; + int actual = target->actual; + int non_null = target->non_null; + int toggle_bits = target->toggle_bits; + int error_count = target->error_count; + int condition_code = target->condition_code; + int repeat_number = target->repeat_number; + void (*callback) (void *, struct urb *, u8 *, int, int, int, int, int, + int, int, int, int) = target->callback; + target->active -= 1; + target->callback = NULL; + (*callback) (target->endp, urb, buffer, length, toggle_bits, + error_count, condition_code, repeat_number, halted, skipped, + actual, non_null); } static char *have_ed_set_response(struct usb_ftdi *ftdi, - struct u132_target *target, u16 ed_length, int ed_number, int ed_type, - char *b) + struct u132_target *target, u16 ed_length, int ed_number, int ed_type, + char *b) { - int payload = (ed_length >> 0) & 0x07FF; - mutex_lock(&ftdi->u132_lock); - target->actual = 0; - target->non_null = (ed_length >> 15) & 0x0001; - target->repeat_number = (ed_length >> 11) & 0x000F; - if (ed_type == 0x02) { - if (payload == 0 || target->abandoning > 0) { - target->abandoning = 0; - mutex_unlock(&ftdi->u132_lock); - ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, - payload); - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - return ftdi->response; - } else { - ftdi->expected = 4 + payload; - ftdi->ed_found = 1; - mutex_unlock(&ftdi->u132_lock); - return b; - } - } else if (ed_type == 0x03) { - if (payload == 0 || target->abandoning > 0) { - target->abandoning = 0; - mutex_unlock(&ftdi->u132_lock); - ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, - payload); - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - return ftdi->response; - } else { - ftdi->expected = 4 + payload; - ftdi->ed_found = 1; - mutex_unlock(&ftdi->u132_lock); - return b; - } - } else if (ed_type == 0x01) { - target->abandoning = 0; - mutex_unlock(&ftdi->u132_lock); - ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, - payload); - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - return ftdi->response; - } else { - target->abandoning = 0; - mutex_unlock(&ftdi->u132_lock); - ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, - payload); - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - return ftdi->response; - } + int payload = (ed_length >> 0) & 0x07FF; + mutex_lock(&ftdi->u132_lock); + target->actual = 0; + target->non_null = (ed_length >> 15) & 0x0001; + target->repeat_number = (ed_length >> 11) & 0x000F; + if (ed_type == 0x02) { + if (payload == 0 || target->abandoning > 0) { + target->abandoning = 0; + mutex_unlock(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } else { + ftdi->expected = 4 + payload; + ftdi->ed_found = 1; + mutex_unlock(&ftdi->u132_lock); + return b; + } + } else if (ed_type == 0x03) { + if (payload == 0 || target->abandoning > 0) { + target->abandoning = 0; + mutex_unlock(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } else { + ftdi->expected = 4 + payload; + ftdi->ed_found = 1; + mutex_unlock(&ftdi->u132_lock); + return b; + } + } else if (ed_type == 0x01) { + target->abandoning = 0; + mutex_unlock(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } else { + target->abandoning = 0; + mutex_unlock(&ftdi->u132_lock); + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; + } } static char *have_ed_get_response(struct usb_ftdi *ftdi, - struct u132_target *target, u16 ed_length, int ed_number, int ed_type, - char *b) + struct u132_target *target, u16 ed_length, int ed_number, int ed_type, + char *b) { - mutex_lock(&ftdi->u132_lock); - target->condition_code = TD_DEVNOTRESP; - target->actual = (ed_length >> 0) & 0x01FF; - target->non_null = (ed_length >> 15) & 0x0001; - target->repeat_number = (ed_length >> 11) & 0x000F; - mutex_unlock(&ftdi->u132_lock); - if (target->active) - ftdi_elan_do_callback(ftdi, target, NULL, 0); - target->abandoning = 0; - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - return ftdi->response; + mutex_lock(&ftdi->u132_lock); + target->condition_code = TD_DEVNOTRESP; + target->actual = (ed_length >> 0) & 0x01FF; + target->non_null = (ed_length >> 15) & 0x0001; + target->repeat_number = (ed_length >> 11) & 0x000F; + mutex_unlock(&ftdi->u132_lock); + if (target->active) + ftdi_elan_do_callback(ftdi, target, NULL, 0); + target->abandoning = 0; + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + return ftdi->response; } /* -* The engine tries to empty the FTDI fifo -* -* all responses found in the fifo data are dispatched thus -* the response buffer can only ever hold a maximum sized -* response from the Uxxx. -* -*/ + * The engine tries to empty the FTDI fifo + * + * all responses found in the fifo data are dispatched thus + * the response buffer can only ever hold a maximum sized + * response from the Uxxx. + * + */ static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi) { - u8 *b = ftdi->response + ftdi->received; - int bytes_read = 0; - int retry_on_empty = 1; - int retry_on_timeout = 3; - int empty_packets = 0; - read:{ - int packet_bytes = 0; - int retval = usb_bulk_msg(ftdi->udev, - usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), - ftdi->bulk_in_buffer, ftdi->bulk_in_size, - &packet_bytes, 500); - char diag[30 *3 + 4]; - char *d = diag; - int m = packet_bytes; - u8 *c = ftdi->bulk_in_buffer; - int s = (sizeof(diag) - 1) / 3; - diag[0] = 0; - while (s-- > 0 && m-- > 0) { - if (s > 0 || m == 0) { - d += sprintf(d, " %02X", *c++); - } else - d += sprintf(d, " .."); - } - if (packet_bytes > 2) { - ftdi->bulk_in_left = packet_bytes - 2; - ftdi->bulk_in_last = 1; - goto have; - } else if (retval == -ETIMEDOUT) { - if (retry_on_timeout-- > 0) { - dev_err(&ftdi->udev->dev, "TIMED OUT with packe" - "t_bytes = %d with total %d bytes%s\n", - packet_bytes, bytes_read, diag); - goto more; - } else if (bytes_read > 0) { - dev_err(&ftdi->udev->dev, "ONLY %d bytes%s\n", - bytes_read, diag); - return -ENOMEM; - } else { - dev_err(&ftdi->udev->dev, "TIMED OUT with packe" - "t_bytes = %d with total %d bytes%s\n", - packet_bytes, bytes_read, diag); - return -ENOMEM; - } - } else if (retval == -EILSEQ) { - dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" - " = %d with total %d bytes%s\n", retval, - packet_bytes, bytes_read, diag); - return retval; - } else if (retval) { - dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" - " = %d with total %d bytes%s\n", retval, - packet_bytes, bytes_read, diag); - return retval; - } else if (packet_bytes == 2) { - unsigned char s0 = ftdi->bulk_in_buffer[0]; - unsigned char s1 = ftdi->bulk_in_buffer[1]; - empty_packets += 1; - if (s0 == 0x31 && s1 == 0x60) { - if (retry_on_empty-- > 0) { - goto more; - } else - return 0; - } else if (s0 == 0x31 && s1 == 0x00) { - if (retry_on_empty-- > 0) { - goto more; - } else - return 0; - } else { - if (retry_on_empty-- > 0) { - goto more; - } else - return 0; - } - } else if (packet_bytes == 1) { - if (retry_on_empty-- > 0) { - goto more; - } else - return 0; - } else { - if (retry_on_empty-- > 0) { - goto more; - } else - return 0; - } - } - more:{ - goto read; - } - have:if (ftdi->bulk_in_left > 0) { - u8 c = ftdi->bulk_in_buffer[++ftdi->bulk_in_last]; - bytes_read += 1; - ftdi->bulk_in_left -= 1; - if (ftdi->received == 0 && c == 0xFF) { - goto have; - } else - *b++ = c; - if (++ftdi->received < ftdi->expected) { - goto have; - } else if (ftdi->ed_found) { - int ed_number = (ftdi->response[0] >> 5) & 0x03; - u16 ed_length = (ftdi->response[2] << 8) | - ftdi->response[1]; - struct u132_target *target = &ftdi->target[ed_number]; - int payload = (ed_length >> 0) & 0x07FF; - char diag[30 *3 + 4]; - char *d = diag; - int m = payload; - u8 *c = 4 + ftdi->response; - int s = (sizeof(diag) - 1) / 3; - diag[0] = 0; - while (s-- > 0 && m-- > 0) { - if (s > 0 || m == 0) { - d += sprintf(d, " %02X", *c++); - } else - d += sprintf(d, " .."); - } - ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, - payload); - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - b = ftdi->response; - goto have; - } else if (ftdi->expected == 8) { - u8 buscmd; - int respond_head = ftdi->respond_head++; - struct u132_respond *respond = &ftdi->respond[ - RESPOND_MASK & respond_head]; - u32 data = ftdi->response[7]; - data <<= 8; - data |= ftdi->response[6]; - data <<= 8; - data |= ftdi->response[5]; - data <<= 8; - data |= ftdi->response[4]; - *respond->value = data; - *respond->result = 0; - complete(&respond->wait_completion); - ftdi->received = 0; - ftdi->expected = 4; - ftdi->ed_found = 0; - b = ftdi->response; - buscmd = (ftdi->response[0] >> 0) & 0x0F; - if (buscmd == 0x00) { - } else if (buscmd == 0x02) { - } else if (buscmd == 0x06) { - } else if (buscmd == 0x0A) { - } else - dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) va" - "lue = %08X\n", buscmd, data); - goto have; - } else { - if ((ftdi->response[0] & 0x80) == 0x00) { - ftdi->expected = 8; - goto have; - } else { - int ed_number = (ftdi->response[0] >> 5) & 0x03; - int ed_type = (ftdi->response[0] >> 0) & 0x03; - u16 ed_length = (ftdi->response[2] << 8) | - ftdi->response[1]; - struct u132_target *target = &ftdi->target[ - ed_number]; - target->halted = (ftdi->response[0] >> 3) & - 0x01; - target->skipped = (ftdi->response[0] >> 2) & - 0x01; - target->toggle_bits = (ftdi->response[3] >> 6) - & 0x03; - target->error_count = (ftdi->response[3] >> 4) - & 0x03; - target->condition_code = (ftdi->response[ - 3] >> 0) & 0x0F; - if ((ftdi->response[0] & 0x10) == 0x00) { - b = have_ed_set_response(ftdi, target, - ed_length, ed_number, ed_type, - b); - goto have; - } else { - b = have_ed_get_response(ftdi, target, - ed_length, ed_number, ed_type, - b); - goto have; - } - } - } - } else - goto more; + u8 *b = ftdi->response + ftdi->received; + int bytes_read = 0; + int retry_on_empty = 1; + int retry_on_timeout = 3; + int empty_packets = 0; +read:{ + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, 500); + char diag[30 *3 + 4]; + char *d = diag; + int m = packet_bytes; + u8 *c = ftdi->bulk_in_buffer; + int s = (sizeof(diag) - 1) / 3; + diag[0] = 0; + while (s-- > 0 && m-- > 0) { + if (s > 0 || m == 0) { + d += sprintf(d, " %02X", *c++); + } else + d += sprintf(d, " .."); + } + if (packet_bytes > 2) { + ftdi->bulk_in_left = packet_bytes - 2; + ftdi->bulk_in_last = 1; + goto have; + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + dev_err(&ftdi->udev->dev, "TIMED OUT with packe" + "t_bytes = %d with total %d bytes%s\n", + packet_bytes, bytes_read, diag); + goto more; + } else if (bytes_read > 0) { + dev_err(&ftdi->udev->dev, "ONLY %d bytes%s\n", + bytes_read, diag); + return -ENOMEM; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT with packe" + "t_bytes = %d with total %d bytes%s\n", + packet_bytes, bytes_read, diag); + return -ENOMEM; + } + } else if (retval == -EILSEQ) { + dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" + " = %d with total %d bytes%s\n", retval, + packet_bytes, bytes_read, diag); + return retval; + } else if (retval) { + dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" + " = %d with total %d bytes%s\n", retval, + packet_bytes, bytes_read, diag); + return retval; + } else if (packet_bytes == 2) { + unsigned char s0 = ftdi->bulk_in_buffer[0]; + unsigned char s1 = ftdi->bulk_in_buffer[1]; + empty_packets += 1; + if (s0 == 0x31 && s1 == 0x60) { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } else if (s0 == 0x31 && s1 == 0x00) { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } else { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } + } else if (packet_bytes == 1) { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } else { + if (retry_on_empty-- > 0) { + goto more; + } else + return 0; + } + } +more:{ + goto read; + } +have:if (ftdi->bulk_in_left > 0) { + u8 c = ftdi->bulk_in_buffer[++ftdi->bulk_in_last]; + bytes_read += 1; + ftdi->bulk_in_left -= 1; + if (ftdi->received == 0 && c == 0xFF) { + goto have; + } else + *b++ = c; + if (++ftdi->received < ftdi->expected) { + goto have; + } else if (ftdi->ed_found) { + int ed_number = (ftdi->response[0] >> 5) & 0x03; + u16 ed_length = (ftdi->response[2] << 8) | + ftdi->response[1]; + struct u132_target *target = &ftdi->target[ed_number]; + int payload = (ed_length >> 0) & 0x07FF; + char diag[30 *3 + 4]; + char *d = diag; + int m = payload; + u8 *c = 4 + ftdi->response; + int s = (sizeof(diag) - 1) / 3; + diag[0] = 0; + while (s-- > 0 && m-- > 0) { + if (s > 0 || m == 0) { + d += sprintf(d, " %02X", *c++); + } else + d += sprintf(d, " .."); + } + ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, + payload); + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + b = ftdi->response; + goto have; + } else if (ftdi->expected == 8) { + u8 buscmd; + int respond_head = ftdi->respond_head++; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & respond_head]; + u32 data = ftdi->response[7]; + data <<= 8; + data |= ftdi->response[6]; + data <<= 8; + data |= ftdi->response[5]; + data <<= 8; + data |= ftdi->response[4]; + *respond->value = data; + *respond->result = 0; + complete(&respond->wait_completion); + ftdi->received = 0; + ftdi->expected = 4; + ftdi->ed_found = 0; + b = ftdi->response; + buscmd = (ftdi->response[0] >> 0) & 0x0F; + if (buscmd == 0x00) { + } else if (buscmd == 0x02) { + } else if (buscmd == 0x06) { + } else if (buscmd == 0x0A) { + } else + dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) va" + "lue = %08X\n", buscmd, data); + goto have; + } else { + if ((ftdi->response[0] & 0x80) == 0x00) { + ftdi->expected = 8; + goto have; + } else { + int ed_number = (ftdi->response[0] >> 5) & 0x03; + int ed_type = (ftdi->response[0] >> 0) & 0x03; + u16 ed_length = (ftdi->response[2] << 8) | + ftdi->response[1]; + struct u132_target *target = &ftdi->target[ + ed_number]; + target->halted = (ftdi->response[0] >> 3) & + 0x01; + target->skipped = (ftdi->response[0] >> 2) & + 0x01; + target->toggle_bits = (ftdi->response[3] >> 6) + & 0x03; + target->error_count = (ftdi->response[3] >> 4) + & 0x03; + target->condition_code = (ftdi->response[ + 3] >> 0) & 0x0F; + if ((ftdi->response[0] & 0x10) == 0x00) { + b = have_ed_set_response(ftdi, target, + ed_length, ed_number, ed_type, + b); + goto have; + } else { + b = have_ed_get_response(ftdi, target, + ed_length, ed_number, ed_type, + b); + goto have; + } + } + } + } else + goto more; } /* -* create a urb, and a buffer for it, and copy the data to the urb -* -*/ + * create a urb, and a buffer for it, and copy the data to the urb + * + */ static ssize_t ftdi_elan_write(struct file *file, const char __user *user_buffer, size_t count, loff_t *ppos) { - int retval = 0; - struct urb *urb; - char *buf; - struct usb_ftdi *ftdi = file->private_data; + int retval = 0; + struct urb *urb; + char *buf; + struct usb_ftdi *ftdi = file->private_data; - if (ftdi->disconnected > 0) { - return -ENODEV; - } - if (count == 0) { - goto exit; - } - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - retval = -ENOMEM; - goto error_1; - } - buf = usb_alloc_coherent(ftdi->udev, count, GFP_KERNEL, - &urb->transfer_dma); - if (!buf) { - retval = -ENOMEM; - goto error_2; - } - if (copy_from_user(buf, user_buffer, count)) { - retval = -EFAULT; - goto error_3; - } - usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, - ftdi->bulk_out_endpointAddr), buf, count, - ftdi_elan_write_bulk_callback, ftdi); - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { + if (ftdi->disconnected > 0) { + return -ENODEV; + } + if (count == 0) { + goto exit; + } + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + retval = -ENOMEM; + goto error_1; + } + buf = usb_alloc_coherent(ftdi->udev, count, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + retval = -ENOMEM; + goto error_2; + } + if (copy_from_user(buf, user_buffer, count)) { + retval = -EFAULT; + goto error_3; + } + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, count, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { dev_err(&ftdi->udev->dev, "failed submitting write urb, error %d\n", retval); - goto error_3; - } - usb_free_urb(urb); + goto error_3; + } + usb_free_urb(urb); exit: - return count; + return count; error_3: usb_free_coherent(ftdi->udev, count, buf, urb->transfer_dma); error_2: @@ -1198,29 +1198,29 @@ error_1: } static const struct file_operations ftdi_elan_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = ftdi_elan_read, - .write = ftdi_elan_write, - .open = ftdi_elan_open, - .release = ftdi_elan_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = ftdi_elan_read, + .write = ftdi_elan_write, + .open = ftdi_elan_open, + .release = ftdi_elan_release, }; /* -* usb class driver info in order to get a minor number from the usb core, -* and to have the device registered with the driver core -*/ + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with the driver core + */ static struct usb_class_driver ftdi_elan_jtag_class = { - .name = "ftdi-%d-jtag", - .fops = &ftdi_elan_fops, - .minor_base = USB_FTDI_ELAN_MINOR_BASE, + .name = "ftdi-%d-jtag", + .fops = &ftdi_elan_fops, + .minor_base = USB_FTDI_ELAN_MINOR_BASE, }; /* -* the following definitions are for the -* ELAN FPGA state machgine processor that -* lies on the other side of the FTDI chip -*/ + * the following definitions are for the + * ELAN FPGA state machgine processor that + * lies on the other side of the FTDI chip + */ #define cPCIu132rd 0x0 #define cPCIu132wr 0x1 #define cPCIiord 0x2 @@ -1251,1694 +1251,1694 @@ static struct usb_class_driver ftdi_elan_jtag_class = { #define cCCnotaccessed 0xF static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data) { - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x00 | cPCIu132wr; - command->length = 0x04; - command->address = 0x00; - command->width = 0x00; - command->follows = 4; - command->value = data; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x00 | cPCIu132wr; + command->length = 0x04; + command->address = 0x00; + command->width = 0x00; + command->follows = 4; + command->value = data; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset, - u8 width, u32 data) + u8 width, u32 data) { - u8 addressofs = config_offset / 4; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x00 | (cPCIcfgwr & 0x0F); - command->length = 0x04; - command->address = addressofs; - command->width = 0x00 | (width & 0x0F); - command->follows = 4; - command->value = data; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 addressofs = config_offset / 4; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x00 | (cPCIcfgwr & 0x0F); + command->length = 0x04; + command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 4; + command->value = data; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset, - u8 width, u32 data) + u8 width, u32 data) { - u8 addressofs = mem_offset / 4; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x00 | (cPCImemwr & 0x0F); - command->length = 0x04; - command->address = addressofs; - command->width = 0x00 | (width & 0x0F); - command->follows = 4; - command->value = data; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 addressofs = mem_offset / 4; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x00 | (cPCImemwr & 0x0F); + command->length = 0x04; + command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 4; + command->value = data; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset, - u8 width, u32 data) + u8 width, u32 data) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_write_pcimem(ftdi, mem_offset, width, data); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_write_pcimem(ftdi, mem_offset, width, data); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_write_pcimem); static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data) { - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else { - int command_size; - int respond_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - respond_size = ftdi->respond_next - ftdi->respond_head; - if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) - { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - struct u132_respond *respond = &ftdi->respond[ - RESPOND_MASK & ftdi->respond_next]; - int result = -ENODEV; - respond->result = &result; - respond->header = command->header = 0x00 | cPCIu132rd; - command->length = 0x04; - respond->address = command->address = cU132cmd_status; - command->width = 0x00; - command->follows = 0; - command->value = 0; - command->buffer = NULL; - respond->value = data; - init_completion(&respond->wait_completion); - ftdi->command_next += 1; - ftdi->respond_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - wait_for_completion(&respond->wait_completion); - return result; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + int respond_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + respond_size = ftdi->respond_next - ftdi->respond_head; + if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) + { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & ftdi->respond_next]; + int result = -ENODEV; + respond->result = &result; + respond->header = command->header = 0x00 | cPCIu132rd; + command->length = 0x04; + respond->address = command->address = cU132cmd_status; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = NULL; + respond->value = data; + init_completion(&respond->wait_completion); + ftdi->command_next += 1; + ftdi->respond_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + wait_for_completion(&respond->wait_completion); + return result; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset, - u8 width, u32 *data) + u8 width, u32 *data) { - u8 addressofs = config_offset / 4; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else { - int command_size; - int respond_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - respond_size = ftdi->respond_next - ftdi->respond_head; - if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) - { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - struct u132_respond *respond = &ftdi->respond[ - RESPOND_MASK & ftdi->respond_next]; - int result = -ENODEV; - respond->result = &result; - respond->header = command->header = 0x00 | (cPCIcfgrd & - 0x0F); - command->length = 0x04; - respond->address = command->address = addressofs; - command->width = 0x00 | (width & 0x0F); - command->follows = 0; - command->value = 0; - command->buffer = NULL; - respond->value = data; - init_completion(&respond->wait_completion); - ftdi->command_next += 1; - ftdi->respond_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - wait_for_completion(&respond->wait_completion); - return result; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 addressofs = config_offset / 4; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + int respond_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + respond_size = ftdi->respond_next - ftdi->respond_head; + if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) + { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & ftdi->respond_next]; + int result = -ENODEV; + respond->result = &result; + respond->header = command->header = 0x00 | (cPCIcfgrd & + 0x0F); + command->length = 0x04; + respond->address = command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + respond->value = data; + init_completion(&respond->wait_completion); + ftdi->command_next += 1; + ftdi->respond_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + wait_for_completion(&respond->wait_completion); + return result; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset, - u8 width, u32 *data) + u8 width, u32 *data) { - u8 addressofs = mem_offset / 4; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else { - int command_size; - int respond_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - respond_size = ftdi->respond_next - ftdi->respond_head; - if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) - { - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - struct u132_respond *respond = &ftdi->respond[ - RESPOND_MASK & ftdi->respond_next]; - int result = -ENODEV; - respond->result = &result; - respond->header = command->header = 0x00 | (cPCImemrd & - 0x0F); - command->length = 0x04; - respond->address = command->address = addressofs; - command->width = 0x00 | (width & 0x0F); - command->follows = 0; - command->value = 0; - command->buffer = NULL; - respond->value = data; - init_completion(&respond->wait_completion); - ftdi->command_next += 1; - ftdi->respond_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - wait_for_completion(&respond->wait_completion); - return result; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 addressofs = mem_offset / 4; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else { + int command_size; + int respond_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + respond_size = ftdi->respond_next - ftdi->respond_head; + if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) + { + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + struct u132_respond *respond = &ftdi->respond[ + RESPOND_MASK & ftdi->respond_next]; + int result = -ENODEV; + respond->result = &result; + respond->header = command->header = 0x00 | (cPCImemrd & + 0x0F); + command->length = 0x04; + respond->address = command->address = addressofs; + command->width = 0x00 | (width & 0x0F); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + respond->value = data; + init_completion(&respond->wait_completion); + ftdi->command_next += 1; + ftdi->respond_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + wait_for_completion(&respond->wait_completion); + return result; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset, - u8 width, u32 *data) + u8 width, u32 *data) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - if (ftdi->initialized == 0) { - return -ENODEV; - } else - return ftdi_elan_read_pcimem(ftdi, mem_offset, width, data); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + if (ftdi->initialized == 0) { + return -ENODEV; + } else + return ftdi_elan_read_pcimem(ftdi, mem_offset, width, data); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_pcimem); static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - u8 ed = ed_number - 1; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else if (ftdi->initialized == 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_target *target = &ftdi->target[ed]; - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x80 | (ed << 5); - command->length = 0x8007; - command->address = (toggle_bits << 6) | (ep_number << 2) - | (address << 0); - command->width = usb_maxpacket(urb->dev, urb->pipe, - usb_pipeout(urb->pipe)); - command->follows = 8; - command->value = 0; - command->buffer = urb->setup_packet; - target->callback = callback; - target->endp = endp; - target->urb = urb; - target->active = 1; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 ed = ed_number - 1; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x80 | (ed << 5); + command->length = 0x8007; + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 8; + command->value = 0; + command->buffer = urb->setup_packet; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_edset_setup(ftdi, ed_number, endp, urb, address, - ep_number, toggle_bits, callback); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_setup(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_setup); static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - u8 ed = ed_number - 1; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else if (ftdi->initialized == 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_target *target = &ftdi->target[ed]; - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - u32 remaining_length = urb->transfer_buffer_length - - urb->actual_length; - command->header = 0x82 | (ed << 5); - if (remaining_length == 0) { - command->length = 0x0000; - } else if (remaining_length > 1024) { - command->length = 0x8000 | 1023; - } else - command->length = 0x8000 | (remaining_length - - 1); - command->address = (toggle_bits << 6) | (ep_number << 2) - | (address << 0); - command->width = usb_maxpacket(urb->dev, urb->pipe, - usb_pipeout(urb->pipe)); - command->follows = 0; - command->value = 0; - command->buffer = NULL; - target->callback = callback; - target->endp = endp; - target->urb = urb; - target->active = 1; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 ed = ed_number - 1; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + u32 remaining_length = urb->transfer_buffer_length - + urb->actual_length; + command->header = 0x82 | (ed << 5); + if (remaining_length == 0) { + command->length = 0x0000; + } else if (remaining_length > 1024) { + command->length = 0x8000 | 1023; + } else + command->length = 0x8000 | (remaining_length - + 1); + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_edset_input(ftdi, ed_number, endp, urb, address, - ep_number, toggle_bits, callback); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_input(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_input); static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - u8 ed = ed_number - 1; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else if (ftdi->initialized == 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_target *target = &ftdi->target[ed]; - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x81 | (ed << 5); - command->length = 0x0000; - command->address = (toggle_bits << 6) | (ep_number << 2) - | (address << 0); - command->width = usb_maxpacket(urb->dev, urb->pipe, - usb_pipeout(urb->pipe)); - command->follows = 0; - command->value = 0; - command->buffer = NULL; - target->callback = callback; - target->endp = endp; - target->urb = urb; - target->active = 1; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 ed = ed_number - 1; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x81 | (ed << 5); + command->length = 0x0000; + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_edset_empty(ftdi, ed_number, endp, urb, address, - ep_number, toggle_bits, callback); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_empty(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_empty); static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - u8 ed = ed_number - 1; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else if (ftdi->initialized == 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - u8 *b; - u16 urb_size; - int i = 0; - char data[30 *3 + 4]; - char *d = data; - int m = (sizeof(data) - 1) / 3; - int l = 0; - struct u132_target *target = &ftdi->target[ed]; - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x81 | (ed << 5); - command->address = (toggle_bits << 6) | (ep_number << 2) - | (address << 0); - command->width = usb_maxpacket(urb->dev, urb->pipe, - usb_pipeout(urb->pipe)); - command->follows = min_t(u32, 1024, - urb->transfer_buffer_length - - urb->actual_length); - command->value = 0; - command->buffer = urb->transfer_buffer + - urb->actual_length; - command->length = 0x8000 | (command->follows - 1); - b = command->buffer; - urb_size = command->follows; - data[0] = 0; - while (urb_size-- > 0) { - if (i > m) { - } else if (i++ < m) { - int w = sprintf(d, " %02X", *b++); - d += w; - l += w; - } else - d += sprintf(d, " .."); - } - target->callback = callback; - target->endp = endp; - target->urb = urb; - target->active = 1; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 ed = ed_number - 1; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + u8 *b; + u16 urb_size; + int i = 0; + char data[30 *3 + 4]; + char *d = data; + int m = (sizeof(data) - 1) / 3; + int l = 0; + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x81 | (ed << 5); + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = min_t(u32, 1024, + urb->transfer_buffer_length - + urb->actual_length); + command->value = 0; + command->buffer = urb->transfer_buffer + + urb->actual_length; + command->length = 0x8000 | (command->follows - 1); + b = command->buffer; + urb_size = command->follows; + data[0] = 0; + while (urb_size-- > 0) { + if (i > m) { + } else if (i++ < m) { + int w = sprintf(d, " %02X", *b++); + d += w; + l += w; + } else + d += sprintf(d, " .."); + } + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_edset_output(ftdi, ed_number, endp, urb, address, - ep_number, toggle_bits, callback); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_output(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_output); static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - u8 ed = ed_number - 1; - wait:if (ftdi->disconnected > 0) { - return -ENODEV; - } else if (ftdi->initialized == 0) { - return -ENODEV; - } else { - int command_size; - mutex_lock(&ftdi->u132_lock); - command_size = ftdi->command_next - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - u32 remaining_length = urb->transfer_buffer_length - - urb->actual_length; - struct u132_target *target = &ftdi->target[ed]; - struct u132_command *command = &ftdi->command[ - COMMAND_MASK & ftdi->command_next]; - command->header = 0x83 | (ed << 5); - if (remaining_length == 0) { - command->length = 0x0000; - } else if (remaining_length > 1024) { - command->length = 0x8000 | 1023; - } else - command->length = 0x8000 | (remaining_length - - 1); - command->address = (toggle_bits << 6) | (ep_number << 2) - | (address << 0); - command->width = usb_maxpacket(urb->dev, urb->pipe, - usb_pipeout(urb->pipe)); - command->follows = 0; - command->value = 0; - command->buffer = NULL; - target->callback = callback; - target->endp = endp; - target->urb = urb; - target->active = 1; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - goto wait; - } - } + u8 ed = ed_number - 1; +wait:if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + int command_size; + mutex_lock(&ftdi->u132_lock); + command_size = ftdi->command_next - ftdi->command_head; + if (command_size < COMMAND_SIZE) { + u32 remaining_length = urb->transfer_buffer_length - + urb->actual_length; + struct u132_target *target = &ftdi->target[ed]; + struct u132_command *command = &ftdi->command[ + COMMAND_MASK & ftdi->command_next]; + command->header = 0x83 | (ed << 5); + if (remaining_length == 0) { + command->length = 0x0000; + } else if (remaining_length > 1024) { + command->length = 0x8000 | 1023; + } else + command->length = 0x8000 | (remaining_length - + 1); + command->address = (toggle_bits << 6) | (ep_number << 2) + | (address << 0); + command->width = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + command->follows = 0; + command->value = 0; + command->buffer = NULL; + target->callback = callback; + target->endp = endp; + target->urb = urb; + target->active = 1; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + goto wait; + } + } } int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number, - void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, - void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, - int toggle_bits, int error_count, int condition_code, int repeat_number, - int halted, int skipped, int actual, int non_null)) + void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits, + void (*callback) (void *endp, struct urb *urb, u8 *buf, int len, + int toggle_bits, int error_count, int condition_code, int repeat_number, + int halted, int skipped, int actual, int non_null)) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_edset_single(ftdi, ed_number, endp, urb, address, - ep_number, toggle_bits, callback); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_single(ftdi, ed_number, endp, urb, address, + ep_number, toggle_bits, callback); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_single); static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number, - void *endp) + void *endp) { - u8 ed = ed_number - 1; - if (ftdi->disconnected > 0) { - return -ENODEV; - } else if (ftdi->initialized == 0) { - return -ENODEV; - } else { - struct u132_target *target = &ftdi->target[ed]; - mutex_lock(&ftdi->u132_lock); - if (target->abandoning > 0) { - mutex_unlock(&ftdi->u132_lock); - return 0; - } else { - target->abandoning = 1; - wait_1:if (target->active == 1) { - int command_size = ftdi->command_next - - ftdi->command_head; - if (command_size < COMMAND_SIZE) { - struct u132_command *command = - &ftdi->command[COMMAND_MASK & - ftdi->command_next]; - command->header = 0x80 | (ed << 5) | - 0x4; - command->length = 0x00; - command->address = 0x00; - command->width = 0x00; - command->follows = 0; - command->value = 0; - command->buffer = &command->value; - ftdi->command_next += 1; - ftdi_elan_kick_command_queue(ftdi); - } else { - mutex_unlock(&ftdi->u132_lock); - msleep(100); - mutex_lock(&ftdi->u132_lock); - goto wait_1; - } - } - mutex_unlock(&ftdi->u132_lock); - return 0; - } - } + u8 ed = ed_number - 1; + if (ftdi->disconnected > 0) { + return -ENODEV; + } else if (ftdi->initialized == 0) { + return -ENODEV; + } else { + struct u132_target *target = &ftdi->target[ed]; + mutex_lock(&ftdi->u132_lock); + if (target->abandoning > 0) { + mutex_unlock(&ftdi->u132_lock); + return 0; + } else { + target->abandoning = 1; + wait_1:if (target->active == 1) { + int command_size = ftdi->command_next - + ftdi->command_head; + if (command_size < COMMAND_SIZE) { + struct u132_command *command = + &ftdi->command[COMMAND_MASK & + ftdi->command_next]; + command->header = 0x80 | (ed << 5) | + 0x4; + command->length = 0x00; + command->address = 0x00; + command->width = 0x00; + command->follows = 0; + command->value = 0; + command->buffer = &command->value; + ftdi->command_next += 1; + ftdi_elan_kick_command_queue(ftdi); + } else { + mutex_unlock(&ftdi->u132_lock); + msleep(100); + mutex_lock(&ftdi->u132_lock); + goto wait_1; + } + } + mutex_unlock(&ftdi->u132_lock); + return 0; + } + } } int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number, - void *endp) + void *endp) { - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_edset_flush(ftdi, ed_number, endp); + struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); + return ftdi_elan_edset_flush(ftdi, ed_number, endp); } EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_flush); static int ftdi_elan_flush_input_fifo(struct usb_ftdi *ftdi) { - int retry_on_empty = 10; - int retry_on_timeout = 5; - int retry_on_status = 20; - more:{ - int packet_bytes = 0; - int retval = usb_bulk_msg(ftdi->udev, - usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), - ftdi->bulk_in_buffer, ftdi->bulk_in_size, - &packet_bytes, 100); - if (packet_bytes > 2) { - char diag[30 *3 + 4]; - char *d = diag; - int m = (sizeof(diag) - 1) / 3; - char *b = ftdi->bulk_in_buffer; - int bytes_read = 0; - diag[0] = 0; - while (packet_bytes-- > 0) { - char c = *b++; - if (bytes_read < m) { - d += sprintf(d, " %02X", - 0x000000FF & c); - } else if (bytes_read > m) { - } else - d += sprintf(d, " .."); - bytes_read += 1; - continue; - } - goto more; - } else if (packet_bytes > 1) { - char s1 = ftdi->bulk_in_buffer[0]; - char s2 = ftdi->bulk_in_buffer[1]; - if (s1 == 0x31 && s2 == 0x60) { - return 0; - } else if (retry_on_status-- > 0) { - goto more; - } else { - dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" - "imit reached\n"); - return -EFAULT; - } - } else if (packet_bytes > 0) { - char b1 = ftdi->bulk_in_buffer[0]; - dev_err(&ftdi->udev->dev, "only one byte flushed from F" - "TDI = %02X\n", b1); - if (retry_on_status-- > 0) { - goto more; - } else { - dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" - "imit reached\n"); - return -EFAULT; - } - } else if (retval == -ETIMEDOUT) { - if (retry_on_timeout-- > 0) { - goto more; - } else { - dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" - "t reached\n"); - return -ENOMEM; - } - } else if (retval == 0) { - if (retry_on_empty-- > 0) { - goto more; - } else { - dev_err(&ftdi->udev->dev, "empty packet retry l" - "imit reached\n"); - return -ENOMEM; - } - } else { - dev_err(&ftdi->udev->dev, "error = %d\n", retval); - return retval; - } - } - return -1; + int retry_on_empty = 10; + int retry_on_timeout = 5; + int retry_on_status = 20; +more:{ + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, 100); + if (packet_bytes > 2) { + char diag[30 *3 + 4]; + char *d = diag; + int m = (sizeof(diag) - 1) / 3; + char *b = ftdi->bulk_in_buffer; + int bytes_read = 0; + diag[0] = 0; + while (packet_bytes-- > 0) { + char c = *b++; + if (bytes_read < m) { + d += sprintf(d, " %02X", + 0x000000FF & c); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + bytes_read += 1; + continue; + } + goto more; + } else if (packet_bytes > 1) { + char s1 = ftdi->bulk_in_buffer[0]; + char s2 = ftdi->bulk_in_buffer[1]; + if (s1 == 0x31 && s2 == 0x60) { + return 0; + } else if (retry_on_status-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" + "imit reached\n"); + return -EFAULT; + } + } else if (packet_bytes > 0) { + char b1 = ftdi->bulk_in_buffer[0]; + dev_err(&ftdi->udev->dev, "only one byte flushed from F" + "TDI = %02X\n", b1); + if (retry_on_status-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" + "imit reached\n"); + return -EFAULT; + } + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" + "t reached\n"); + return -ENOMEM; + } + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "empty packet retry l" + "imit reached\n"); + return -ENOMEM; + } + } else { + dev_err(&ftdi->udev->dev, "error = %d\n", retval); + return retval; + } + } + return -1; } /* -* send the long flush sequence -* -*/ + * send the long flush sequence + * + */ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi) { - int retval; - struct urb *urb; - char *buf; - int I = 257; - int i = 0; - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequ" - "ence\n"); - return -ENOMEM; - } - buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); - if (!buf) { - dev_err(&ftdi->udev->dev, "could not get a buffer for flush seq" - "uence\n"); - usb_free_urb(urb); - return -ENOMEM; - } - while (I-- > 0) - buf[i++] = 0x55; - usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, - ftdi->bulk_out_endpointAddr), buf, i, - ftdi_elan_write_bulk_callback, ftdi); - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - dev_err(&ftdi->udev->dev, "failed to submit urb containing the " - "flush sequence\n"); - usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma); - usb_free_urb(urb); - return -ENOMEM; - } - usb_free_urb(urb); - return 0; + int retval; + struct urb *urb; + char *buf; + int I = 257; + int i = 0; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequ" + "ence\n"); + return -ENOMEM; + } + buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); + if (!buf) { + dev_err(&ftdi->udev->dev, "could not get a buffer for flush seq" + "uence\n"); + usb_free_urb(urb); + return -ENOMEM; + } + while (I-- > 0) + buf[i++] = 0x55; + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, i, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed to submit urb containing the " + "flush sequence\n"); + usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma); + usb_free_urb(urb); + return -ENOMEM; + } + usb_free_urb(urb); + return 0; } /* -* send the reset sequence -* -*/ + * send the reset sequence + * + */ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi) { - int retval; - struct urb *urb; - char *buf; - int I = 4; - int i = 0; - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&ftdi->udev->dev, "could not get a urb for the reset se" - "quence\n"); - return -ENOMEM; - } - buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); - if (!buf) { - dev_err(&ftdi->udev->dev, "could not get a buffer for the reset" - " sequence\n"); - usb_free_urb(urb); - return -ENOMEM; - } - buf[i++] = 0x55; - buf[i++] = 0xAA; - buf[i++] = 0x5A; - buf[i++] = 0xA5; - usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, - ftdi->bulk_out_endpointAddr), buf, i, - ftdi_elan_write_bulk_callback, ftdi); - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - dev_err(&ftdi->udev->dev, "failed to submit urb containing the " - "reset sequence\n"); - usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma); - usb_free_urb(urb); - return -ENOMEM; - } - usb_free_urb(urb); - return 0; + int retval; + struct urb *urb; + char *buf; + int I = 4; + int i = 0; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(&ftdi->udev->dev, "could not get a urb for the reset se" + "quence\n"); + return -ENOMEM; + } + buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); + if (!buf) { + dev_err(&ftdi->udev->dev, "could not get a buffer for the reset" + " sequence\n"); + usb_free_urb(urb); + return -ENOMEM; + } + buf[i++] = 0x55; + buf[i++] = 0xAA; + buf[i++] = 0x5A; + buf[i++] = 0xA5; + usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev, + ftdi->bulk_out_endpointAddr), buf, i, + ftdi_elan_write_bulk_callback, ftdi); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&ftdi->udev->dev, "failed to submit urb containing the " + "reset sequence\n"); + usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma); + usb_free_urb(urb); + return -ENOMEM; + } + usb_free_urb(urb); + return 0; } static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) { - int retval; - int long_stop = 10; - int retry_on_timeout = 5; - int retry_on_empty = 10; - int err_count = 0; - retval = ftdi_elan_flush_input_fifo(ftdi); - if (retval) - return retval; - ftdi->bulk_in_left = 0; - ftdi->bulk_in_last = -1; - while (long_stop-- > 0) { - int read_stop; - int read_stuck; - retval = ftdi_elan_synchronize_flush(ftdi); - if (retval) - return retval; - retval = ftdi_elan_flush_input_fifo(ftdi); - if (retval) - return retval; - reset:retval = ftdi_elan_synchronize_reset(ftdi); - if (retval) - return retval; - read_stop = 100; - read_stuck = 10; - read:{ - int packet_bytes = 0; - retval = usb_bulk_msg(ftdi->udev, - usb_rcvbulkpipe(ftdi->udev, - ftdi->bulk_in_endpointAddr), - ftdi->bulk_in_buffer, ftdi->bulk_in_size, - &packet_bytes, 500); - if (packet_bytes > 2) { - char diag[30 *3 + 4]; - char *d = diag; - int m = (sizeof(diag) - 1) / 3; - char *b = ftdi->bulk_in_buffer; - int bytes_read = 0; - unsigned char c = 0; - diag[0] = 0; - while (packet_bytes-- > 0) { - c = *b++; - if (bytes_read < m) { - d += sprintf(d, " %02X", c); - } else if (bytes_read > m) { - } else - d += sprintf(d, " .."); - bytes_read += 1; - continue; - } - if (c == 0x7E) { - return 0; - } else { - if (c == 0x55) { - goto read; - } else if (read_stop-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "retr" - "y limit reached\n"); - continue; - } - } - } else if (packet_bytes > 1) { - unsigned char s1 = ftdi->bulk_in_buffer[0]; - unsigned char s2 = ftdi->bulk_in_buffer[1]; - if (s1 == 0x31 && s2 == 0x00) { - if (read_stuck-- > 0) { - goto read; - } else - goto reset; - } else if (s1 == 0x31 && s2 == 0x60) { - if (read_stop-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "retr" - "y limit reached\n"); - continue; - } - } else { - if (read_stop-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "retr" - "y limit reached\n"); - continue; - } - } - } else if (packet_bytes > 0) { - if (read_stop-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "retry limit " - "reached\n"); - continue; - } - } else if (retval == -ETIMEDOUT) { - if (retry_on_timeout-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "TIMED OUT re" - "try limit reached\n"); - continue; - } - } else if (retval == 0) { - if (retry_on_empty-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "empty packet" - " retry limit reached\n"); - continue; - } - } else { - err_count += 1; - dev_err(&ftdi->udev->dev, "error = %d\n", - retval); - if (read_stop-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "retry limit " - "reached\n"); - continue; - } - } - } - } - dev_err(&ftdi->udev->dev, "failed to synchronize\n"); - return -EFAULT; + int retval; + int long_stop = 10; + int retry_on_timeout = 5; + int retry_on_empty = 10; + int err_count = 0; + retval = ftdi_elan_flush_input_fifo(ftdi); + if (retval) + return retval; + ftdi->bulk_in_left = 0; + ftdi->bulk_in_last = -1; + while (long_stop-- > 0) { + int read_stop; + int read_stuck; + retval = ftdi_elan_synchronize_flush(ftdi); + if (retval) + return retval; + retval = ftdi_elan_flush_input_fifo(ftdi); + if (retval) + return retval; + reset:retval = ftdi_elan_synchronize_reset(ftdi); + if (retval) + return retval; + read_stop = 100; + read_stuck = 10; + read:{ + int packet_bytes = 0; + retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, + ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, 500); + if (packet_bytes > 2) { + char diag[30 *3 + 4]; + char *d = diag; + int m = (sizeof(diag) - 1) / 3; + char *b = ftdi->bulk_in_buffer; + int bytes_read = 0; + unsigned char c = 0; + diag[0] = 0; + while (packet_bytes-- > 0) { + c = *b++; + if (bytes_read < m) { + d += sprintf(d, " %02X", c); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + bytes_read += 1; + continue; + } + if (c == 0x7E) { + return 0; + } else { + if (c == 0x55) { + goto read; + } else if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retr" + "y limit reached\n"); + continue; + } + } + } else if (packet_bytes > 1) { + unsigned char s1 = ftdi->bulk_in_buffer[0]; + unsigned char s2 = ftdi->bulk_in_buffer[1]; + if (s1 == 0x31 && s2 == 0x00) { + if (read_stuck-- > 0) { + goto read; + } else + goto reset; + } else if (s1 == 0x31 && s2 == 0x60) { + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retr" + "y limit reached\n"); + continue; + } + } else { + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retr" + "y limit reached\n"); + continue; + } + } + } else if (packet_bytes > 0) { + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retry limit " + "reached\n"); + continue; + } + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT re" + "try limit reached\n"); + continue; + } + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "empty packet" + " retry limit reached\n"); + continue; + } + } else { + err_count += 1; + dev_err(&ftdi->udev->dev, "error = %d\n", + retval); + if (read_stop-- > 0) { + goto read; + } else { + dev_err(&ftdi->udev->dev, "retry limit " + "reached\n"); + continue; + } + } + } + } + dev_err(&ftdi->udev->dev, "failed to synchronize\n"); + return -EFAULT; } static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi) { - int retry_on_empty = 10; - int retry_on_timeout = 5; - int retry_on_status = 50; - more:{ - int packet_bytes = 0; - int retval = usb_bulk_msg(ftdi->udev, - usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), - ftdi->bulk_in_buffer, ftdi->bulk_in_size, - &packet_bytes, 1000); - if (packet_bytes > 2) { - char diag[30 *3 + 4]; - char *d = diag; - int m = (sizeof(diag) - 1) / 3; - char *b = ftdi->bulk_in_buffer; - int bytes_read = 0; - diag[0] = 0; - while (packet_bytes-- > 0) { - char c = *b++; - if (bytes_read < m) { - d += sprintf(d, " %02X", - 0x000000FF & c); - } else if (bytes_read > m) { - } else - d += sprintf(d, " .."); - bytes_read += 1; - continue; - } - goto more; - } else if (packet_bytes > 1) { - char s1 = ftdi->bulk_in_buffer[0]; - char s2 = ftdi->bulk_in_buffer[1]; - if (s1 == 0x31 && s2 == 0x60) { - return 0; - } else if (retry_on_status-- > 0) { - msleep(5); - goto more; - } else - return -EFAULT; - } else if (packet_bytes > 0) { - char b1 = ftdi->bulk_in_buffer[0]; - dev_err(&ftdi->udev->dev, "only one byte flushed from F" - "TDI = %02X\n", b1); - if (retry_on_status-- > 0) { - msleep(5); - goto more; - } else { - dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" - "imit reached\n"); - return -EFAULT; - } - } else if (retval == -ETIMEDOUT) { - if (retry_on_timeout-- > 0) { - goto more; - } else { - dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" - "t reached\n"); - return -ENOMEM; - } - } else if (retval == 0) { - if (retry_on_empty-- > 0) { - goto more; - } else { - dev_err(&ftdi->udev->dev, "empty packet retry l" - "imit reached\n"); - return -ENOMEM; - } - } else { - dev_err(&ftdi->udev->dev, "error = %d\n", retval); - return -ENOMEM; - } - } - return -1; + int retry_on_empty = 10; + int retry_on_timeout = 5; + int retry_on_status = 50; +more:{ + int packet_bytes = 0; + int retval = usb_bulk_msg(ftdi->udev, + usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr), + ftdi->bulk_in_buffer, ftdi->bulk_in_size, + &packet_bytes, 1000); + if (packet_bytes > 2) { + char diag[30 *3 + 4]; + char *d = diag; + int m = (sizeof(diag) - 1) / 3; + char *b = ftdi->bulk_in_buffer; + int bytes_read = 0; + diag[0] = 0; + while (packet_bytes-- > 0) { + char c = *b++; + if (bytes_read < m) { + d += sprintf(d, " %02X", + 0x000000FF & c); + } else if (bytes_read > m) { + } else + d += sprintf(d, " .."); + bytes_read += 1; + continue; + } + goto more; + } else if (packet_bytes > 1) { + char s1 = ftdi->bulk_in_buffer[0]; + char s2 = ftdi->bulk_in_buffer[1]; + if (s1 == 0x31 && s2 == 0x60) { + return 0; + } else if (retry_on_status-- > 0) { + msleep(5); + goto more; + } else + return -EFAULT; + } else if (packet_bytes > 0) { + char b1 = ftdi->bulk_in_buffer[0]; + dev_err(&ftdi->udev->dev, "only one byte flushed from F" + "TDI = %02X\n", b1); + if (retry_on_status-- > 0) { + msleep(5); + goto more; + } else { + dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" + "imit reached\n"); + return -EFAULT; + } + } else if (retval == -ETIMEDOUT) { + if (retry_on_timeout-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" + "t reached\n"); + return -ENOMEM; + } + } else if (retval == 0) { + if (retry_on_empty-- > 0) { + goto more; + } else { + dev_err(&ftdi->udev->dev, "empty packet retry l" + "imit reached\n"); + return -ENOMEM; + } + } else { + dev_err(&ftdi->udev->dev, "error = %d\n", retval); + return -ENOMEM; + } + } + return -1; } static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) { - int UxxxStatus = ftdi_elan_read_reg(ftdi, &ftdi->controlreg); - if (UxxxStatus) - return UxxxStatus; - if (ftdi->controlreg & 0x00400000) { - if (ftdi->card_ejected) { - } else { - ftdi->card_ejected = 1; - dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = " - "%08X\n", ftdi->controlreg); - } - return -ENODEV; - } else { - u8 fn = ftdi->function - 1; - int activePCIfn = fn << 8; - u32 pcidata; - u32 pciVID; - u32 pciPID; - int reg = 0; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - pciVID = pcidata & 0xFFFF; - pciPID = (pcidata >> 16) & 0xFFFF; - if (pciVID == ftdi->platform_data.vendor && pciPID == - ftdi->platform_data.device) { - return 0; - } else { - dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X devi" - "ce=%04X pciPID=%04X\n", - ftdi->platform_data.vendor, pciVID, - ftdi->platform_data.device, pciPID); - return -ENODEV; - } - } + int UxxxStatus = ftdi_elan_read_reg(ftdi, &ftdi->controlreg); + if (UxxxStatus) + return UxxxStatus; + if (ftdi->controlreg & 0x00400000) { + if (ftdi->card_ejected) { + } else { + ftdi->card_ejected = 1; + dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = " + "%08X\n", ftdi->controlreg); + } + return -ENODEV; + } else { + u8 fn = ftdi->function - 1; + int activePCIfn = fn << 8; + u32 pcidata; + u32 pciVID; + u32 pciPID; + int reg = 0; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + pciVID = pcidata & 0xFFFF; + pciPID = (pcidata >> 16) & 0xFFFF; + if (pciVID == ftdi->platform_data.vendor && pciPID == + ftdi->platform_data.device) { + return 0; + } else { + dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X devi" + "ce=%04X pciPID=%04X\n", + ftdi->platform_data.vendor, pciVID, + ftdi->platform_data.device, pciPID); + return -ENODEV; + } + } } #define ftdi_read_pcimem(ftdi, member, data) ftdi_elan_read_pcimem(ftdi, \ - offsetof(struct ohci_regs, member), 0, data); + offsetof(struct ohci_regs, member), 0, data); #define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \ - offsetof(struct ohci_regs, member), 0, data); + offsetof(struct ohci_regs, member), 0, data); #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR -#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ - OHCI_INTR_WDH) +#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ + OHCI_INTR_WDH) static int ftdi_elan_check_controller(struct usb_ftdi *ftdi, int quirk) { - int devices = 0; - int retval; - u32 hc_control; - int num_ports; - u32 control; - u32 rh_a = -1; - u32 status; - u32 fminterval; - u32 hc_fminterval; - u32 periodicstart; - u32 cmdstatus; - u32 roothub_a; - int mask = OHCI_INTR_INIT; - int sleep_time = 0; - int reset_timeout = 30; /* ... allow extra time */ - int temp; - retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, control, &control); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a); - if (retval) - return retval; - num_ports = rh_a & RH_A_NDP; - retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval); - if (retval) - return retval; - hc_fminterval &= 0x3fff; - if (hc_fminterval != FI) { - } - hc_fminterval |= FSMP(hc_fminterval) << 16; - retval = ftdi_read_pcimem(ftdi, control, &hc_control); - if (retval) - return retval; - switch (hc_control & OHCI_CTRL_HCFS) { - case OHCI_USB_OPER: - sleep_time = 0; - break; - case OHCI_USB_SUSPEND: - case OHCI_USB_RESUME: - hc_control &= OHCI_CTRL_RWC; - hc_control |= OHCI_USB_RESUME; - sleep_time = 10; - break; - default: - hc_control &= OHCI_CTRL_RWC; - hc_control |= OHCI_USB_RESET; - sleep_time = 50; - break; - } - retval = ftdi_write_pcimem(ftdi, control, hc_control); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, control, &control); - if (retval) - return retval; - msleep(sleep_time); - retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a); - if (retval) - return retval; - if (!(roothub_a & RH_A_NPS)) { /* power down each port */ - for (temp = 0; temp < num_ports; temp++) { - retval = ftdi_write_pcimem(ftdi, - roothub.portstatus[temp], RH_PS_LSDA); - if (retval) - return retval; - } - } - retval = ftdi_read_pcimem(ftdi, control, &control); - if (retval) - return retval; - retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR); - if (retval) - return retval; - extra:{ - retval = ftdi_read_pcimem(ftdi, cmdstatus, &status); - if (retval) - return retval; - if (0 != (status & OHCI_HCR)) { - if (--reset_timeout == 0) { - dev_err(&ftdi->udev->dev, "USB HC reset timed o" - "ut!\n"); - return -ENODEV; - } else { - msleep(5); - goto extra; - } - } - } - if (quirk & OHCI_QUIRK_INITRESET) { - retval = ftdi_write_pcimem(ftdi, control, hc_control); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, control, &control); - if (retval) - return retval; - } - retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, fminterval, - ((fminterval & FIT) ^ FIT) | hc_fminterval); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, periodicstart, - ((9 *hc_fminterval) / 10) & 0x3fff); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart); - if (retval) - return retval; - if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) { - if (!(quirk & OHCI_QUIRK_INITRESET)) { - quirk |= OHCI_QUIRK_INITRESET; - goto retry; - } else - dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n", - fminterval, periodicstart); - } /* start controller operations */ - hc_control &= OHCI_CTRL_RWC; - hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER; - retval = ftdi_write_pcimem(ftdi, control, hc_control); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, control, &control); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, intrstatus, mask); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, intrdisable, - OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO | - OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH | - OHCI_INTR_SO); - if (retval) - return retval; /* handle root hub init quirks ... */ - retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a); - if (retval) - return retval; - roothub_a &= ~(RH_A_PSM | RH_A_OCPM); - if (quirk & OHCI_QUIRK_SUPERIO) { - roothub_a |= RH_A_NOCP; - roothub_a &= ~(RH_A_POTPGT | RH_A_NPS); - retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a); - if (retval) - return retval; - } else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) { - roothub_a |= RH_A_NPS; - retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a); - if (retval) - return retval; - } - retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC); - if (retval) - return retval; - retval = ftdi_write_pcimem(ftdi, roothub.b, - (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM); - if (retval) - return retval; - retval = ftdi_read_pcimem(ftdi, control, &control); - if (retval) - return retval; - mdelay((roothub_a >> 23) & 0x1fe); - for (temp = 0; temp < num_ports; temp++) { - u32 portstatus; - retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp], - &portstatus); - if (retval) - return retval; - if (1 & portstatus) - devices += 1; - } - return devices; + int devices = 0; + int retval; + u32 hc_control; + int num_ports; + u32 control; + u32 rh_a = -1; + u32 status; + u32 fminterval; + u32 hc_fminterval; + u32 periodicstart; + u32 cmdstatus; + u32 roothub_a; + int mask = OHCI_INTR_INIT; + int sleep_time = 0; + int reset_timeout = 30; /* ... allow extra time */ + int temp; + retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a); + if (retval) + return retval; + num_ports = rh_a & RH_A_NDP; + retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval); + if (retval) + return retval; + hc_fminterval &= 0x3fff; + if (hc_fminterval != FI) { + } + hc_fminterval |= FSMP(hc_fminterval) << 16; + retval = ftdi_read_pcimem(ftdi, control, &hc_control); + if (retval) + return retval; + switch (hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + sleep_time = 0; + break; + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + hc_control &= OHCI_CTRL_RWC; + hc_control |= OHCI_USB_RESUME; + sleep_time = 10; + break; + default: + hc_control &= OHCI_CTRL_RWC; + hc_control |= OHCI_USB_RESET; + sleep_time = 50; + break; + } + retval = ftdi_write_pcimem(ftdi, control, hc_control); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + msleep(sleep_time); + retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a); + if (retval) + return retval; + if (!(roothub_a & RH_A_NPS)) { /* power down each port */ + for (temp = 0; temp < num_ports; temp++) { + retval = ftdi_write_pcimem(ftdi, + roothub.portstatus[temp], RH_PS_LSDA); + if (retval) + return retval; + } + } + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; +retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR); + if (retval) + return retval; +extra:{ + retval = ftdi_read_pcimem(ftdi, cmdstatus, &status); + if (retval) + return retval; + if (0 != (status & OHCI_HCR)) { + if (--reset_timeout == 0) { + dev_err(&ftdi->udev->dev, "USB HC reset timed o" + "ut!\n"); + return -ENODEV; + } else { + msleep(5); + goto extra; + } + } + } + if (quirk & OHCI_QUIRK_INITRESET) { + retval = ftdi_write_pcimem(ftdi, control, hc_control); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + } + retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, fminterval, + ((fminterval & FIT) ^ FIT) | hc_fminterval); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, periodicstart, + ((9 *hc_fminterval) / 10) & 0x3fff); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart); + if (retval) + return retval; + if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) { + if (!(quirk & OHCI_QUIRK_INITRESET)) { + quirk |= OHCI_QUIRK_INITRESET; + goto retry; + } else + dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n", + fminterval, periodicstart); + } /* start controller operations */ + hc_control &= OHCI_CTRL_RWC; + hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER; + retval = ftdi_write_pcimem(ftdi, control, hc_control); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, intrstatus, mask); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, intrdisable, + OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO | + OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH | + OHCI_INTR_SO); + if (retval) + return retval; /* handle root hub init quirks ... */ + retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a); + if (retval) + return retval; + roothub_a &= ~(RH_A_PSM | RH_A_OCPM); + if (quirk & OHCI_QUIRK_SUPERIO) { + roothub_a |= RH_A_NOCP; + roothub_a &= ~(RH_A_POTPGT | RH_A_NPS); + retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a); + if (retval) + return retval; + } else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) { + roothub_a |= RH_A_NPS; + retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a); + if (retval) + return retval; + } + retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, roothub.b, + (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + mdelay((roothub_a >> 23) & 0x1fe); + for (temp = 0; temp < num_ports; temp++) { + u32 portstatus; + retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp], + &portstatus); + if (retval) + return retval; + if (1 & portstatus) + devices += 1; + } + return devices; } static int ftdi_elan_setup_controller(struct usb_ftdi *ftdi, int fn) { - u32 latence_timer; - int UxxxStatus; - u32 pcidata; - int reg = 0; - int activePCIfn = fn << 8; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); - if (UxxxStatus) - return UxxxStatus; - reg = 16; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, - 0xFFFFFFFF); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, - 0xF0000000); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - reg = 12; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &latence_timer); - if (UxxxStatus) - return UxxxStatus; - latence_timer &= 0xFFFF00FF; - latence_timer |= 0x00001600; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, - latence_timer); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - reg = 4; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, - 0x06); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - for (reg = 0; reg <= 0x54; reg += 4) { - UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (UxxxStatus) - return UxxxStatus; - } - return 0; + u32 latence_timer; + int UxxxStatus; + u32 pcidata; + int reg = 0; + int activePCIfn = fn << 8; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); + if (UxxxStatus) + return UxxxStatus; + reg = 16; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xFFFFFFFF); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xF0000000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + reg = 12; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &latence_timer); + if (UxxxStatus) + return UxxxStatus; + latence_timer &= 0xFFFF00FF; + latence_timer |= 0x00001600; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + latence_timer); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + reg = 4; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + 0x06); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + for (reg = 0; reg <= 0x54; reg += 4) { + UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); + if (UxxxStatus) + return UxxxStatus; + } + return 0; } static int ftdi_elan_close_controller(struct usb_ftdi *ftdi, int fn) { - u32 latence_timer; - int UxxxStatus; - u32 pcidata; - int reg = 0; - int activePCIfn = fn << 8; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); - if (UxxxStatus) - return UxxxStatus; - reg = 16; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, - 0xFFFFFFFF); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, - 0x00000000); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - reg = 12; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &latence_timer); - if (UxxxStatus) - return UxxxStatus; - latence_timer &= 0xFFFF00FF; - latence_timer |= 0x00001600; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, - latence_timer); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - reg = 4; - UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, - 0x00); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - return 0; + u32 latence_timer; + int UxxxStatus; + u32 pcidata; + int reg = 0; + int activePCIfn = fn << 8; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); + if (UxxxStatus) + return UxxxStatus; + reg = 16; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xFFFFFFFF); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0x00000000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + reg = 12; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &latence_timer); + if (UxxxStatus) + return UxxxStatus; + latence_timer &= 0xFFFF00FF; + latence_timer |= 0x00001600; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + latence_timer); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + reg = 4; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + 0x00); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + return 0; } static int ftdi_elan_found_controller(struct usb_ftdi *ftdi, int fn, int quirk) { - int result; - int UxxxStatus; - UxxxStatus = ftdi_elan_setup_controller(ftdi, fn); - if (UxxxStatus) - return UxxxStatus; - result = ftdi_elan_check_controller(ftdi, quirk); - UxxxStatus = ftdi_elan_close_controller(ftdi, fn); - if (UxxxStatus) - return UxxxStatus; - return result; + int result; + int UxxxStatus; + UxxxStatus = ftdi_elan_setup_controller(ftdi, fn); + if (UxxxStatus) + return UxxxStatus; + result = ftdi_elan_check_controller(ftdi, quirk); + UxxxStatus = ftdi_elan_close_controller(ftdi, fn); + if (UxxxStatus) + return UxxxStatus; + return result; } static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) { - u32 controlreg; - u8 sensebits; - int UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L); - if (UxxxStatus) - return UxxxStatus; - msleep(750); - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000); - if (UxxxStatus) - return UxxxStatus; - msleep(250); - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); - if (UxxxStatus) - return UxxxStatus; - msleep(1000); - sensebits = (controlreg >> 16) & 0x000F; - if (0x0D == sensebits) - return 0; - else + u32 controlreg; + u8 sensebits; + int UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L); + if (UxxxStatus) + return UxxxStatus; + msleep(750); + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000); + if (UxxxStatus) + return UxxxStatus; + msleep(250); + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + msleep(1000); + sensebits = (controlreg >> 16) & 0x000F; + if (0x0D == sensebits) + return 0; + else return - ENXIO; } static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi) { - int UxxxStatus; - u32 pcidata; - int reg = 0; - u8 fn; - int activePCIfn = 0; - int max_devices = 0; - int controllers = 0; - int unrecognized = 0; - ftdi->function = 0; - for (fn = 0; (fn < 4); fn++) { - u32 pciVID = 0; - u32 pciPID = 0; - int devices = 0; - activePCIfn = fn << 8; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); - if (UxxxStatus) - return UxxxStatus; - pciVID = pcidata & 0xFFFF; - pciPID = (pcidata >> 16) & 0xFFFF; - if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) { - devices = ftdi_elan_found_controller(ftdi, fn, 0); - controllers += 1; - } else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035)) - { - devices = ftdi_elan_found_controller(ftdi, fn, 0); - controllers += 1; - } else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) { - devices = ftdi_elan_found_controller(ftdi, fn, 0); - controllers += 1; - } else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802)) - { - devices = ftdi_elan_found_controller(ftdi, fn, 0); - controllers += 1; - } else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) { - devices = ftdi_elan_found_controller(ftdi, fn, - OHCI_QUIRK_AMD756); - controllers += 1; - } else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) { - devices = ftdi_elan_found_controller(ftdi, fn, - OHCI_QUIRK_ZFMICRO); - controllers += 1; - } else if (0 == pcidata) { - } else - unrecognized += 1; - if (devices > max_devices) { - max_devices = devices; - ftdi->function = fn + 1; - ftdi->platform_data.vendor = pciVID; - ftdi->platform_data.device = pciPID; - } - } - if (ftdi->function > 0) { - UxxxStatus = ftdi_elan_setup_controller(ftdi, - ftdi->function - 1); - if (UxxxStatus) - return UxxxStatus; - return 0; - } else if (controllers > 0) { - return -ENXIO; - } else if (unrecognized > 0) { - return -ENXIO; - } else { - ftdi->enumerated = 0; - return -ENXIO; - } + int UxxxStatus; + u32 pcidata; + int reg = 0; + u8 fn; + int activePCIfn = 0; + int max_devices = 0; + int controllers = 0; + int unrecognized = 0; + ftdi->function = 0; + for (fn = 0; (fn < 4); fn++) { + u32 pciVID = 0; + u32 pciPID = 0; + int devices = 0; + activePCIfn = fn << 8; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + pciVID = pcidata & 0xFFFF; + pciPID = (pcidata >> 16) & 0xFFFF; + if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035)) + { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802)) + { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) { + devices = ftdi_elan_found_controller(ftdi, fn, + OHCI_QUIRK_AMD756); + controllers += 1; + } else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) { + devices = ftdi_elan_found_controller(ftdi, fn, + OHCI_QUIRK_ZFMICRO); + controllers += 1; + } else if (0 == pcidata) { + } else + unrecognized += 1; + if (devices > max_devices) { + max_devices = devices; + ftdi->function = fn + 1; + ftdi->platform_data.vendor = pciVID; + ftdi->platform_data.device = pciPID; + } + } + if (ftdi->function > 0) { + UxxxStatus = ftdi_elan_setup_controller(ftdi, + ftdi->function - 1); + if (UxxxStatus) + return UxxxStatus; + return 0; + } else if (controllers > 0) { + return -ENXIO; + } else if (unrecognized > 0) { + return -ENXIO; + } else { + ftdi->enumerated = 0; + return -ENXIO; + } } /* -* we use only the first bulk-in and bulk-out endpoints -*/ + * we use only the first bulk-in and bulk-out endpoints + */ static int ftdi_elan_probe(struct usb_interface *interface, - const struct usb_device_id *id) + const struct usb_device_id *id) { - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - size_t buffer_size; - int i; - int retval = -ENOMEM; - struct usb_ftdi *ftdi; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + size_t buffer_size; + int i; + int retval = -ENOMEM; + struct usb_ftdi *ftdi; ftdi = kzalloc(sizeof(struct usb_ftdi), GFP_KERNEL); if (!ftdi) { - printk(KERN_ERR "Out of memory\n"); - return -ENOMEM; - } + printk(KERN_ERR "Out of memory\n"); + return -ENOMEM; + } - mutex_lock(&ftdi_module_lock); - list_add_tail(&ftdi->ftdi_list, &ftdi_static_list); - ftdi->sequence_num = ++ftdi_instances; - mutex_unlock(&ftdi_module_lock); - ftdi_elan_init_kref(ftdi); + mutex_lock(&ftdi_module_lock); + list_add_tail(&ftdi->ftdi_list, &ftdi_static_list); + ftdi->sequence_num = ++ftdi_instances; + mutex_unlock(&ftdi_module_lock); + ftdi_elan_init_kref(ftdi); sema_init(&ftdi->sw_lock, 1); - ftdi->udev = usb_get_dev(interface_to_usbdev(interface)); - ftdi->interface = interface; - mutex_init(&ftdi->u132_lock); - ftdi->expected = 4; - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - if (!ftdi->bulk_in_endpointAddr && + ftdi->udev = usb_get_dev(interface_to_usbdev(interface)); + ftdi->interface = interface; + mutex_init(&ftdi->u132_lock); + ftdi->expected = 4; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (!ftdi->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { - buffer_size = usb_endpoint_maxp(endpoint); - ftdi->bulk_in_size = buffer_size; - ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; - ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!ftdi->bulk_in_buffer) { - dev_err(&ftdi->udev->dev, "Could not allocate b" - "ulk_in_buffer\n"); - retval = -ENOMEM; - goto error; - } - } - if (!ftdi->bulk_out_endpointAddr && + buffer_size = usb_endpoint_maxp(endpoint); + ftdi->bulk_in_size = buffer_size; + ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; + ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!ftdi->bulk_in_buffer) { + dev_err(&ftdi->udev->dev, "Could not allocate b" + "ulk_in_buffer\n"); + retval = -ENOMEM; + goto error; + } + } + if (!ftdi->bulk_out_endpointAddr && usb_endpoint_is_bulk_out(endpoint)) { - ftdi->bulk_out_endpointAddr = - endpoint->bEndpointAddress; - } - } - if (!(ftdi->bulk_in_endpointAddr && ftdi->bulk_out_endpointAddr)) { - dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk" - "-out endpoints\n"); - retval = -ENODEV; - goto error; - } - dev_info(&ftdi->udev->dev, "interface %d has I=%02X O=%02X\n", - iface_desc->desc.bInterfaceNumber, ftdi->bulk_in_endpointAddr, - ftdi->bulk_out_endpointAddr); - usb_set_intfdata(interface, ftdi); - if (iface_desc->desc.bInterfaceNumber == 0 && - ftdi->bulk_in_endpointAddr == 0x81 && - ftdi->bulk_out_endpointAddr == 0x02) { - retval = usb_register_dev(interface, &ftdi_elan_jtag_class); - if (retval) { - dev_err(&ftdi->udev->dev, "Not able to get a minor for " - "this device.\n"); - usb_set_intfdata(interface, NULL); - retval = -ENOMEM; - goto error; - } else { - ftdi->class = &ftdi_elan_jtag_class; - dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface " - "%d now attached to ftdi%d\n", ftdi, - iface_desc->desc.bInterfaceNumber, - interface->minor); - return 0; - } - } else if (iface_desc->desc.bInterfaceNumber == 1 && - ftdi->bulk_in_endpointAddr == 0x83 && - ftdi->bulk_out_endpointAddr == 0x04) { - ftdi->class = NULL; - dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now a" - "ctivated\n", ftdi, iface_desc->desc.bInterfaceNumber); - INIT_DELAYED_WORK(&ftdi->status_work, ftdi_elan_status_work); - INIT_DELAYED_WORK(&ftdi->command_work, ftdi_elan_command_work); - INIT_DELAYED_WORK(&ftdi->respond_work, ftdi_elan_respond_work); - ftdi_status_queue_work(ftdi, msecs_to_jiffies(3 *1000)); - return 0; - } else { - dev_err(&ftdi->udev->dev, - "Could not find ELAN's U132 device\n"); - retval = -ENODEV; - goto error; - } - error:if (ftdi) { - ftdi_elan_put_kref(ftdi); - } - return retval; + ftdi->bulk_out_endpointAddr = + endpoint->bEndpointAddress; + } + } + if (!(ftdi->bulk_in_endpointAddr && ftdi->bulk_out_endpointAddr)) { + dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk" + "-out endpoints\n"); + retval = -ENODEV; + goto error; + } + dev_info(&ftdi->udev->dev, "interface %d has I=%02X O=%02X\n", + iface_desc->desc.bInterfaceNumber, ftdi->bulk_in_endpointAddr, + ftdi->bulk_out_endpointAddr); + usb_set_intfdata(interface, ftdi); + if (iface_desc->desc.bInterfaceNumber == 0 && + ftdi->bulk_in_endpointAddr == 0x81 && + ftdi->bulk_out_endpointAddr == 0x02) { + retval = usb_register_dev(interface, &ftdi_elan_jtag_class); + if (retval) { + dev_err(&ftdi->udev->dev, "Not able to get a minor for " + "this device.\n"); + usb_set_intfdata(interface, NULL); + retval = -ENOMEM; + goto error; + } else { + ftdi->class = &ftdi_elan_jtag_class; + dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface " + "%d now attached to ftdi%d\n", ftdi, + iface_desc->desc.bInterfaceNumber, + interface->minor); + return 0; + } + } else if (iface_desc->desc.bInterfaceNumber == 1 && + ftdi->bulk_in_endpointAddr == 0x83 && + ftdi->bulk_out_endpointAddr == 0x04) { + ftdi->class = NULL; + dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now a" + "ctivated\n", ftdi, iface_desc->desc.bInterfaceNumber); + INIT_DELAYED_WORK(&ftdi->status_work, ftdi_elan_status_work); + INIT_DELAYED_WORK(&ftdi->command_work, ftdi_elan_command_work); + INIT_DELAYED_WORK(&ftdi->respond_work, ftdi_elan_respond_work); + ftdi_status_queue_work(ftdi, msecs_to_jiffies(3 *1000)); + return 0; + } else { + dev_err(&ftdi->udev->dev, + "Could not find ELAN's U132 device\n"); + retval = -ENODEV; + goto error; + } +error:if (ftdi) { + ftdi_elan_put_kref(ftdi); + } + return retval; } static void ftdi_elan_disconnect(struct usb_interface *interface) { - struct usb_ftdi *ftdi = usb_get_intfdata(interface); - ftdi->disconnected += 1; - if (ftdi->class) { - int minor = interface->minor; - struct usb_class_driver *class = ftdi->class; - usb_set_intfdata(interface, NULL); - usb_deregister_dev(interface, class); - dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on min" - "or %d now disconnected\n", minor); - } else { - ftdi_status_cancel_work(ftdi); - ftdi_command_cancel_work(ftdi); - ftdi_response_cancel_work(ftdi); - ftdi_elan_abandon_completions(ftdi); - ftdi_elan_abandon_targets(ftdi); - if (ftdi->registered) { - platform_device_unregister(&ftdi->platform_dev); - ftdi->synchronized = 0; - ftdi->enumerated = 0; - ftdi->initialized = 0; - ftdi->registered = 0; - } - flush_workqueue(status_queue); - flush_workqueue(command_queue); - flush_workqueue(respond_queue); - ftdi->disconnected += 1; - usb_set_intfdata(interface, NULL); - dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller inter" - "face now disconnected\n"); - } - ftdi_elan_put_kref(ftdi); + struct usb_ftdi *ftdi = usb_get_intfdata(interface); + ftdi->disconnected += 1; + if (ftdi->class) { + int minor = interface->minor; + struct usb_class_driver *class = ftdi->class; + usb_set_intfdata(interface, NULL); + usb_deregister_dev(interface, class); + dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on min" + "or %d now disconnected\n", minor); + } else { + ftdi_status_cancel_work(ftdi); + ftdi_command_cancel_work(ftdi); + ftdi_response_cancel_work(ftdi); + ftdi_elan_abandon_completions(ftdi); + ftdi_elan_abandon_targets(ftdi); + if (ftdi->registered) { + platform_device_unregister(&ftdi->platform_dev); + ftdi->synchronized = 0; + ftdi->enumerated = 0; + ftdi->initialized = 0; + ftdi->registered = 0; + } + flush_workqueue(status_queue); + flush_workqueue(command_queue); + flush_workqueue(respond_queue); + ftdi->disconnected += 1; + usb_set_intfdata(interface, NULL); + dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller inter" + "face now disconnected\n"); + } + ftdi_elan_put_kref(ftdi); } static struct usb_driver ftdi_elan_driver = { - .name = "ftdi-elan", - .probe = ftdi_elan_probe, - .disconnect = ftdi_elan_disconnect, - .id_table = ftdi_elan_table, + .name = "ftdi-elan", + .probe = ftdi_elan_probe, + .disconnect = ftdi_elan_disconnect, + .id_table = ftdi_elan_table, }; static int __init ftdi_elan_init(void) { - int result; - printk(KERN_INFO "driver %s\n", ftdi_elan_driver.name); - mutex_init(&ftdi_module_lock); - INIT_LIST_HEAD(&ftdi_static_list); - status_queue = create_singlethread_workqueue("ftdi-status-control"); + int result; + printk(KERN_INFO "driver %s\n", ftdi_elan_driver.name); + mutex_init(&ftdi_module_lock); + INIT_LIST_HEAD(&ftdi_static_list); + status_queue = create_singlethread_workqueue("ftdi-status-control"); if (!status_queue) goto err_status_queue; - command_queue = create_singlethread_workqueue("ftdi-command-engine"); + command_queue = create_singlethread_workqueue("ftdi-command-engine"); if (!command_queue) goto err_command_queue; - respond_queue = create_singlethread_workqueue("ftdi-respond-engine"); + respond_queue = create_singlethread_workqueue("ftdi-respond-engine"); if (!respond_queue) goto err_respond_queue; - result = usb_register(&ftdi_elan_driver); - if (result) { + result = usb_register(&ftdi_elan_driver); + if (result) { destroy_workqueue(status_queue); destroy_workqueue(command_queue); destroy_workqueue(respond_queue); - printk(KERN_ERR "usb_register failed. Error number %d\n", + printk(KERN_ERR "usb_register failed. Error number %d\n", result); } - return result; + return result; - err_respond_queue: +err_respond_queue: destroy_workqueue(command_queue); - err_command_queue: +err_command_queue: destroy_workqueue(status_queue); - err_status_queue: +err_status_queue: printk(KERN_ERR "%s couldn't create workqueue\n", ftdi_elan_driver.name); return -ENOMEM; } static void __exit ftdi_elan_exit(void) { - struct usb_ftdi *ftdi; - struct usb_ftdi *temp; - usb_deregister(&ftdi_elan_driver); - printk(KERN_INFO "ftdi_u132 driver deregistered\n"); - list_for_each_entry_safe(ftdi, temp, &ftdi_static_list, ftdi_list) { - ftdi_status_cancel_work(ftdi); - ftdi_command_cancel_work(ftdi); - ftdi_response_cancel_work(ftdi); - } flush_workqueue(status_queue); - destroy_workqueue(status_queue); - status_queue = NULL; - flush_workqueue(command_queue); - destroy_workqueue(command_queue); - command_queue = NULL; - flush_workqueue(respond_queue); - destroy_workqueue(respond_queue); - respond_queue = NULL; + struct usb_ftdi *ftdi; + struct usb_ftdi *temp; + usb_deregister(&ftdi_elan_driver); + printk(KERN_INFO "ftdi_u132 driver deregistered\n"); + list_for_each_entry_safe(ftdi, temp, &ftdi_static_list, ftdi_list) { + ftdi_status_cancel_work(ftdi); + ftdi_command_cancel_work(ftdi); + ftdi_response_cancel_work(ftdi); + } flush_workqueue(status_queue); + destroy_workqueue(status_queue); + status_queue = NULL; + flush_workqueue(command_queue); + destroy_workqueue(command_queue); + command_queue = NULL; + flush_workqueue(respond_queue); + destroy_workqueue(respond_queue); + respond_queue = NULL; } From 5acc6e40713cbd754c8d4162f77d6fd062d22317 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 4 Apr 2014 15:16:05 -0700 Subject: [PATCH 055/314] usb: ftdi-elan: Coalesce formats Make it easier to find formats. Realign arguments around these changes. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 151 +++++++++++++---------------------- 1 file changed, 56 insertions(+), 95 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 0487f8e1e817..8cda8814a3ef 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -545,11 +545,10 @@ static void ftdi_elan_status_work(struct work_struct *work) ftdi->stuck_status = 0; ftdi->synchronized = 0; } else if ((ftdi->stuck_status++ % 60) == 1) { - dev_err(&ftdi->udev->dev, "WRONG type of card inserted " - "- please remove\n"); + dev_err(&ftdi->udev->dev, "WRONG type of card inserted - please remove\n"); } else - dev_err(&ftdi->udev->dev, "WRONG type of card inserted " - "- checked %d times\n", ftdi->stuck_status); + dev_err(&ftdi->udev->dev, "WRONG type of card inserted - checked %d times\n", + ftdi->stuck_status); work_delay_in_msec = 100; } else if (ftdi->enumerated == 0) { if (ftdi_elan_enumeratePCI(ftdi) == 0) { @@ -562,8 +561,7 @@ static void ftdi_elan_status_work(struct work_struct *work) ftdi->initialized = 1; work_delay_in_msec = 500; } else { - dev_err(&ftdi->udev->dev, "initialized failed - trying " - "again in 10 seconds\n"); + dev_err(&ftdi->udev->dev, "initialized failed - trying again in 10 seconds\n"); work_delay_in_msec = 1 *1000; } } else if (ftdi->registered == 0) { @@ -578,9 +576,7 @@ static void ftdi_elan_status_work(struct work_struct *work) work_delay_in_msec = 250; } else if (ftdi->controlreg & 0x00400000) { if (ftdi->gone_away > 0) { - dev_err(&ftdi->udev->dev, "PCI device eject con" - "firmed platform_dev.dev.parent=%p plat" - "form_dev.dev=%p\n", + dev_err(&ftdi->udev->dev, "PCI device eject confirmed platform_dev.dev.parent=%p platform_dev.dev=%p\n", ftdi->platform_dev.dev.parent, &ftdi->platform_dev.dev); platform_device_unregister(&ftdi->platform_dev); @@ -788,17 +784,15 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi) total_size = ftdi_elan_total_command_size(ftdi, command_size); urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - dev_err(&ftdi->udev->dev, "could not get a urb to write %d comm" - "ands totaling %d bytes to the Uxxx\n", command_size, - total_size); + dev_err(&ftdi->udev->dev, "could not get a urb to write %d commands totaling %d bytes to the Uxxx\n", + command_size, total_size); return -ENOMEM; } buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL, &urb->transfer_dma); if (!buf) { - dev_err(&ftdi->udev->dev, "could not get a buffer to write %d c" - "ommands totaling %d bytes to the Uxxx\n", command_size, - total_size); + dev_err(&ftdi->udev->dev, "could not get a buffer to write %d commands totaling %d bytes to the Uxxx\n", + command_size, total_size); usb_free_urb(urb); return -ENOMEM; } @@ -824,9 +818,8 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi) } retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write " - "%d commands totaling %d bytes to the Uxxx\n", retval, - urb, command_size, total_size); + dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write %d commands totaling %d bytes to the Uxxx\n", + retval, urb, command_size, total_size); usb_free_coherent(ftdi->udev, total_size, buf, urb->transfer_dma); usb_free_urb(urb); return retval; @@ -980,8 +973,7 @@ read:{ goto have; } else if (retval == -ETIMEDOUT) { if (retry_on_timeout-- > 0) { - dev_err(&ftdi->udev->dev, "TIMED OUT with packe" - "t_bytes = %d with total %d bytes%s\n", + dev_err(&ftdi->udev->dev, "TIMED OUT with packet_bytes = %d with total %d bytes%s\n", packet_bytes, bytes_read, diag); goto more; } else if (bytes_read > 0) { @@ -989,20 +981,17 @@ read:{ bytes_read, diag); return -ENOMEM; } else { - dev_err(&ftdi->udev->dev, "TIMED OUT with packe" - "t_bytes = %d with total %d bytes%s\n", + dev_err(&ftdi->udev->dev, "TIMED OUT with packet_bytes = %d with total %d bytes%s\n", packet_bytes, bytes_read, diag); return -ENOMEM; } } else if (retval == -EILSEQ) { - dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" - " = %d with total %d bytes%s\n", retval, - packet_bytes, bytes_read, diag); + dev_err(&ftdi->udev->dev, "error = %d with packet_bytes = %d with total %d bytes%s\n", + retval, packet_bytes, bytes_read, diag); return retval; } else if (retval) { - dev_err(&ftdi->udev->dev, "error = %d with packet_bytes" - " = %d with total %d bytes%s\n", retval, - packet_bytes, bytes_read, diag); + dev_err(&ftdi->udev->dev, "error = %d with packet_bytes = %d with total %d bytes%s\n", + retval, packet_bytes, bytes_read, diag); return retval; } else if (packet_bytes == 2) { unsigned char s0 = ftdi->bulk_in_buffer[0]; @@ -1099,8 +1088,8 @@ have:if (ftdi->bulk_in_left > 0) { } else if (buscmd == 0x06) { } else if (buscmd == 0x0A) { } else - dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) va" - "lue = %08X\n", buscmd, data); + dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) value = %08X\n", + buscmd, data); goto have; } else { if ((ftdi->response[0] & 0x80) == 0x00) { @@ -1909,35 +1898,31 @@ more:{ } else if (retry_on_status-- > 0) { goto more; } else { - dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" - "imit reached\n"); + dev_err(&ftdi->udev->dev, "STATUS ERROR retry limit reached\n"); return -EFAULT; } } else if (packet_bytes > 0) { char b1 = ftdi->bulk_in_buffer[0]; - dev_err(&ftdi->udev->dev, "only one byte flushed from F" - "TDI = %02X\n", b1); + dev_err(&ftdi->udev->dev, "only one byte flushed from FTDI = %02X\n", + b1); if (retry_on_status-- > 0) { goto more; } else { - dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" - "imit reached\n"); + dev_err(&ftdi->udev->dev, "STATUS ERROR retry limit reached\n"); return -EFAULT; } } else if (retval == -ETIMEDOUT) { if (retry_on_timeout-- > 0) { goto more; } else { - dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" - "t reached\n"); + dev_err(&ftdi->udev->dev, "TIMED OUT retry limit reached\n"); return -ENOMEM; } } else if (retval == 0) { if (retry_on_empty-- > 0) { goto more; } else { - dev_err(&ftdi->udev->dev, "empty packet retry l" - "imit reached\n"); + dev_err(&ftdi->udev->dev, "empty packet retry limit reached\n"); return -ENOMEM; } } else { @@ -1962,14 +1947,12 @@ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi) int i = 0; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequ" - "ence\n"); + dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequence\n"); return -ENOMEM; } buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); if (!buf) { - dev_err(&ftdi->udev->dev, "could not get a buffer for flush seq" - "uence\n"); + dev_err(&ftdi->udev->dev, "could not get a buffer for flush sequence\n"); usb_free_urb(urb); return -ENOMEM; } @@ -1981,8 +1964,7 @@ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi) urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - dev_err(&ftdi->udev->dev, "failed to submit urb containing the " - "flush sequence\n"); + dev_err(&ftdi->udev->dev, "failed to submit urb containing the flush sequence\n"); usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma); usb_free_urb(urb); return -ENOMEM; @@ -2005,14 +1987,12 @@ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi) int i = 0; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - dev_err(&ftdi->udev->dev, "could not get a urb for the reset se" - "quence\n"); + dev_err(&ftdi->udev->dev, "could not get a urb for the reset sequence\n"); return -ENOMEM; } buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma); if (!buf) { - dev_err(&ftdi->udev->dev, "could not get a buffer for the reset" - " sequence\n"); + dev_err(&ftdi->udev->dev, "could not get a buffer for the reset sequence\n"); usb_free_urb(urb); return -ENOMEM; } @@ -2026,8 +2006,7 @@ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi) urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; retval = usb_submit_urb(urb, GFP_KERNEL); if (retval) { - dev_err(&ftdi->udev->dev, "failed to submit urb containing the " - "reset sequence\n"); + dev_err(&ftdi->udev->dev, "failed to submit urb containing the reset sequence\n"); usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma); usb_free_urb(urb); return -ENOMEM; @@ -2095,8 +2074,7 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) } else if (read_stop-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "retr" - "y limit reached\n"); + dev_err(&ftdi->udev->dev, "retry limit reached\n"); continue; } } @@ -2112,16 +2090,14 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) if (read_stop-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "retr" - "y limit reached\n"); + dev_err(&ftdi->udev->dev, "retry limit reached\n"); continue; } } else { if (read_stop-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "retr" - "y limit reached\n"); + dev_err(&ftdi->udev->dev, "retry limit reached\n"); continue; } } @@ -2129,24 +2105,21 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) if (read_stop-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "retry limit " - "reached\n"); + dev_err(&ftdi->udev->dev, "retry limit reached\n"); continue; } } else if (retval == -ETIMEDOUT) { if (retry_on_timeout-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "TIMED OUT re" - "try limit reached\n"); + dev_err(&ftdi->udev->dev, "TIMED OUT retry limit reached\n"); continue; } } else if (retval == 0) { if (retry_on_empty-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "empty packet" - " retry limit reached\n"); + dev_err(&ftdi->udev->dev, "empty packet retry limit reached\n"); continue; } } else { @@ -2156,8 +2129,7 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) if (read_stop-- > 0) { goto read; } else { - dev_err(&ftdi->udev->dev, "retry limit " - "reached\n"); + dev_err(&ftdi->udev->dev, "retry limit reached\n"); continue; } } @@ -2209,30 +2181,26 @@ more:{ return -EFAULT; } else if (packet_bytes > 0) { char b1 = ftdi->bulk_in_buffer[0]; - dev_err(&ftdi->udev->dev, "only one byte flushed from F" - "TDI = %02X\n", b1); + dev_err(&ftdi->udev->dev, "only one byte flushed from FTDI = %02X\n", b1); if (retry_on_status-- > 0) { msleep(5); goto more; } else { - dev_err(&ftdi->udev->dev, "STATUS ERROR retry l" - "imit reached\n"); + dev_err(&ftdi->udev->dev, "STATUS ERROR retry limit reached\n"); return -EFAULT; } } else if (retval == -ETIMEDOUT) { if (retry_on_timeout-- > 0) { goto more; } else { - dev_err(&ftdi->udev->dev, "TIMED OUT retry limi" - "t reached\n"); + dev_err(&ftdi->udev->dev, "TIMED OUT retry limit reached\n"); return -ENOMEM; } } else if (retval == 0) { if (retry_on_empty-- > 0) { goto more; } else { - dev_err(&ftdi->udev->dev, "empty packet retry l" - "imit reached\n"); + dev_err(&ftdi->udev->dev, "empty packet retry limit reached\n"); return -ENOMEM; } } else { @@ -2252,8 +2220,8 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) if (ftdi->card_ejected) { } else { ftdi->card_ejected = 1; - dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = " - "%08X\n", ftdi->controlreg); + dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = %08X\n", + ftdi->controlreg); } return -ENODEV; } else { @@ -2273,8 +2241,7 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) ftdi->platform_data.device) { return 0; } else { - dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X devi" - "ce=%04X pciPID=%04X\n", + dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X device=%04X pciPID=%04X\n", ftdi->platform_data.vendor, pciVID, ftdi->platform_data.device, pciPID); return -ENODEV; @@ -2378,8 +2345,7 @@ extra:{ return retval; if (0 != (status & OHCI_HCR)) { if (--reset_timeout == 0) { - dev_err(&ftdi->udev->dev, "USB HC reset timed o" - "ut!\n"); + dev_err(&ftdi->udev->dev, "USB HC reset timed out!\n"); return -ENODEV; } else { msleep(5); @@ -2782,8 +2748,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!ftdi->bulk_in_buffer) { - dev_err(&ftdi->udev->dev, "Could not allocate b" - "ulk_in_buffer\n"); + dev_err(&ftdi->udev->dev, "Could not allocate bulk_in_buffer\n"); retval = -ENOMEM; goto error; } @@ -2795,8 +2760,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, } } if (!(ftdi->bulk_in_endpointAddr && ftdi->bulk_out_endpointAddr)) { - dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk" - "-out endpoints\n"); + dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk-out endpoints\n"); retval = -ENODEV; goto error; } @@ -2809,16 +2773,14 @@ static int ftdi_elan_probe(struct usb_interface *interface, ftdi->bulk_out_endpointAddr == 0x02) { retval = usb_register_dev(interface, &ftdi_elan_jtag_class); if (retval) { - dev_err(&ftdi->udev->dev, "Not able to get a minor for " - "this device.\n"); + dev_err(&ftdi->udev->dev, "Not able to get a minor for this device\n"); usb_set_intfdata(interface, NULL); retval = -ENOMEM; goto error; } else { ftdi->class = &ftdi_elan_jtag_class; - dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface " - "%d now attached to ftdi%d\n", ftdi, - iface_desc->desc.bInterfaceNumber, + dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface %d now attached to ftdi%d\n", + ftdi, iface_desc->desc.bInterfaceNumber, interface->minor); return 0; } @@ -2826,8 +2788,8 @@ static int ftdi_elan_probe(struct usb_interface *interface, ftdi->bulk_in_endpointAddr == 0x83 && ftdi->bulk_out_endpointAddr == 0x04) { ftdi->class = NULL; - dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now a" - "ctivated\n", ftdi, iface_desc->desc.bInterfaceNumber); + dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now activated\n", + ftdi, iface_desc->desc.bInterfaceNumber); INIT_DELAYED_WORK(&ftdi->status_work, ftdi_elan_status_work); INIT_DELAYED_WORK(&ftdi->command_work, ftdi_elan_command_work); INIT_DELAYED_WORK(&ftdi->respond_work, ftdi_elan_respond_work); @@ -2854,8 +2816,8 @@ static void ftdi_elan_disconnect(struct usb_interface *interface) struct usb_class_driver *class = ftdi->class; usb_set_intfdata(interface, NULL); usb_deregister_dev(interface, class); - dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on min" - "or %d now disconnected\n", minor); + dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on minor %d now disconnected\n", + minor); } else { ftdi_status_cancel_work(ftdi); ftdi_command_cancel_work(ftdi); @@ -2874,8 +2836,7 @@ static void ftdi_elan_disconnect(struct usb_interface *interface) flush_workqueue(respond_queue); ftdi->disconnected += 1; usb_set_intfdata(interface, NULL); - dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller inter" - "face now disconnected\n"); + dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller interface now disconnected\n"); } ftdi_elan_put_kref(ftdi); } From a92cec2737d16c458ec04836d1271a832b56a2e6 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 4 Apr 2014 15:16:06 -0700 Subject: [PATCH 056/314] usb: ftdi-elan: Coalesce string fragment Make it easier to grep for this. Neaten a trailing statement. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 8cda8814a3ef..10c54b36d26c 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -55,8 +55,8 @@ MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) static bool distrust_firmware = 1; module_param(distrust_firmware, bool, 0); -MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" - "t setup"); +MODULE_PARM_DESC(distrust_firmware, + "true to distrust firmware power/overcurrent setup"); extern struct platform_driver u132_platform_driver; static struct workqueue_struct *status_queue; static struct workqueue_struct *command_queue; @@ -590,8 +590,7 @@ static void ftdi_elan_status_work(struct work_struct *work) ftdi_elan_flush_targets(ftdi); work_delay_in_msec = 250; } else { - dev_err(&ftdi->udev->dev, "PCI device has disappeared\n" - ); + dev_err(&ftdi->udev->dev, "PCI device has disappeared\n"); ftdi_elan_cancel_targets(ftdi); work_delay_in_msec = 500; ftdi->enumerated = 0; From 8355d39cc2128c80fd58309fdca825b1444bf067 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 4 Apr 2014 15:16:07 -0700 Subject: [PATCH 057/314] usb: ftdi-elan: Use pr_ Use a more current logging style. Add pr_fmt to prefix messages appropriately. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 10c54b36d26c..8ab1f8f3c26e 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -35,6 +35,9 @@ * via an ELAN U132 adapter. * */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -623,7 +626,7 @@ static int ftdi_elan_open(struct inode *inode, struct file *file) interface = usb_find_interface(&ftdi_elan_driver, subminor); if (!interface) { - printk(KERN_ERR "can't find device for minor %d\n", subminor); + pr_err("can't find device for minor %d\n", subminor); return -ENODEV; } else { struct usb_ftdi *ftdi = usb_get_intfdata(interface); @@ -2722,10 +2725,8 @@ static int ftdi_elan_probe(struct usb_interface *interface, struct usb_ftdi *ftdi; ftdi = kzalloc(sizeof(struct usb_ftdi), GFP_KERNEL); - if (!ftdi) { - printk(KERN_ERR "Out of memory\n"); + if (!ftdi) return -ENOMEM; - } mutex_lock(&ftdi_module_lock); list_add_tail(&ftdi->ftdi_list, &ftdi_static_list); @@ -2849,7 +2850,7 @@ static struct usb_driver ftdi_elan_driver = { static int __init ftdi_elan_init(void) { int result; - printk(KERN_INFO "driver %s\n", ftdi_elan_driver.name); + pr_info("driver %s\n", ftdi_elan_driver.name); mutex_init(&ftdi_module_lock); INIT_LIST_HEAD(&ftdi_static_list); status_queue = create_singlethread_workqueue("ftdi-status-control"); @@ -2866,8 +2867,7 @@ static int __init ftdi_elan_init(void) destroy_workqueue(status_queue); destroy_workqueue(command_queue); destroy_workqueue(respond_queue); - printk(KERN_ERR "usb_register failed. Error number %d\n", - result); + pr_err("usb_register failed. Error number %d\n", result); } return result; @@ -2876,7 +2876,7 @@ err_respond_queue: err_command_queue: destroy_workqueue(status_queue); err_status_queue: - printk(KERN_ERR "%s couldn't create workqueue\n", ftdi_elan_driver.name); + pr_err("%s couldn't create workqueue\n", ftdi_elan_driver.name); return -ENOMEM; } @@ -2885,7 +2885,7 @@ static void __exit ftdi_elan_exit(void) struct usb_ftdi *ftdi; struct usb_ftdi *temp; usb_deregister(&ftdi_elan_driver); - printk(KERN_INFO "ftdi_u132 driver deregistered\n"); + pr_info("ftdi_u132 driver deregistered\n"); list_for_each_entry_safe(ftdi, temp, &ftdi_static_list, ftdi_list) { ftdi_status_cancel_work(ftdi); ftdi_command_cancel_work(ftdi); From 40cc57c71b27998c558d4ea23556cad2baef8a56 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 25 Apr 2014 14:10:02 -0500 Subject: [PATCH 058/314] usb: dwc3: gadget: print both cmd string and number That way it's easy for humans looking at dmesg and humans(?) looking at Databooks. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index f0dc0ee85ded..f5adf3fd8d89 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -336,9 +336,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, u32 timeout = 500; u32 reg; - dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n", + dev_vdbg(dwc->dev, "%s: cmd '%s' [%d] params %08x %08x %08x\n", dep->name, - dwc3_gadget_ep_cmd_string(cmd), params->param0, + dwc3_gadget_ep_cmd_string(cmd), cmd, params->param0, params->param1, params->param2); dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0); From e57ebc1db6ef796124b69abca044a373b9110a47 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 22 Apr 2014 13:20:12 -0500 Subject: [PATCH 059/314] usb: dwc3: gadget: pretty print link states this makes it slightly easier to read link state change interrupt logs. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 44 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index f5adf3fd8d89..9a8ae39f7fa8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -302,6 +302,42 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd) } } +static const char *dwc3_gadget_link_string(enum dwc3_link_state link_state) +{ + switch (link_state) { + case DWC3_LINK_STATE_U0: + return "U0"; + case DWC3_LINK_STATE_U1: + return "U1"; + case DWC3_LINK_STATE_U2: + return "U2"; + case DWC3_LINK_STATE_U3: + return "U3"; + case DWC3_LINK_STATE_SS_DIS: + return "SS.Disabled"; + case DWC3_LINK_STATE_RX_DET: + return "RX.Detect"; + case DWC3_LINK_STATE_SS_INACT: + return "SS.Inactive"; + case DWC3_LINK_STATE_POLL: + return "Polling"; + case DWC3_LINK_STATE_RECOV: + return "Recovery"; + case DWC3_LINK_STATE_HRESET: + return "Hot Reset"; + case DWC3_LINK_STATE_CMPLY: + return "Compliance"; + case DWC3_LINK_STATE_LPBK: + return "Loopback"; + case DWC3_LINK_STATE_RESET: + return "Reset"; + case DWC3_LINK_STATE_RESUME: + return "Resume"; + default: + return "UNKNOWN link state\n"; + } +} + int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) { u32 timeout = 500; @@ -2449,8 +2485,6 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, } } - dwc->link_state = next; - switch (next) { case DWC3_LINK_STATE_U1: if (dwc->speed == USB_SPEED_SUPER) @@ -2468,7 +2502,11 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, break; } - dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state); + dev_vdbg(dwc->dev, "link change: %s [%d] -> %s [%d]\n", + dwc3_gadget_link_string(dwc->link_state), + dwc->link_state, dwc3_gadget_link_string(next), next); + + dwc->link_state = next; } static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc, From 427c3df684ab97379b529188d505cc99c2a1429d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 25 Apr 2014 14:14:14 -0500 Subject: [PATCH 060/314] usb: dwc3: gadget: pretty print Generic CMDs this makes it slightly easier to read generic CMD logs. It also helps make sure we're sending proper parameters for each command. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9a8ae39f7fa8..e0b791050930 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -302,6 +302,32 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd) } } +static const char *dwc3_gadget_generic_cmd_string(u8 cmd) +{ + switch (cmd) { + case DWC3_DGCMD_SET_LMP: + return "Set LMP"; + case DWC3_DGCMD_SET_PERIODIC_PAR: + return "Set Periodic Parameters"; + case DWC3_DGCMD_XMIT_FUNCTION: + return "Transmit Function Wake Device Notification"; + case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO: + return "Set Scratchpad Buffer Array Address Lo"; + case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI: + return "Set Scratchpad Buffer Array Address Hi"; + case DWC3_DGCMD_SELECTED_FIFO_FLUSH: + return "Selected FIFO Flush"; + case DWC3_DGCMD_ALL_FIFO_FLUSH: + return "All FIFO Flush"; + case DWC3_DGCMD_SET_ENDPOINT_NRDY: + return "Set Endpoint NRDY"; + case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK: + return "Run SoC Bus Loopback Test"; + default: + return "UNKNOWN"; + } +} + static const char *dwc3_gadget_link_string(enum dwc3_link_state link_state) { switch (link_state) { @@ -343,6 +369,9 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) u32 timeout = 500; u32 reg; + dev_vdbg(dwc->dev, "generic cmd '%s' [%d] param %08x\n", + dwc3_gadget_generic_cmd_string(cmd), cmd, param); + dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param); dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT); From d5dbd3f7d82223b59dc2200c0e9f4f95665a21a4 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Fri, 25 Apr 2014 14:18:13 -0700 Subject: [PATCH 061/314] usb: dwc2: fix sparse warning Sparse warns about the __le16 wValue from the USB SetAddress command being used without converting it to CPU endianness. Fix that, and also add a bit of defensive masking of the received wValue before using it. Reported-by: Fengguang Wu Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index dc0faee031fb..2057c380969e 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1094,7 +1094,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, s3c_hsotg_disconnect(hsotg); dcfg = readl(hsotg->regs + DCFG); dcfg &= ~DCFG_DEVADDR_MASK; - dcfg |= ctrl->wValue << DCFG_DEVADDR_SHIFT; + dcfg |= (le16_to_cpu(ctrl->wValue) << + DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK; writel(dcfg, hsotg->regs + DCFG); dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); From 0d092fdb8c7a1b874d5c1b56f14d97b62df13186 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:04 +0300 Subject: [PATCH 062/314] usb: phy: msm: Make driver selectable on ARCH_QCOM Controller could be found on APQ and MSM platforms, make configuration description more generic. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 416e0c8cf6ff..0c668a3f5c37 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -171,11 +171,11 @@ config USB_ISP1301 module will be called phy-isp1301. config USB_MSM_OTG - tristate "OTG support for Qualcomm on-chip USB controller" - depends on (USB || USB_GADGET) && ARCH_MSM + tristate "Qualcomm on-chip USB OTG controller support" + depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM) select USB_PHY help - Enable this to support the USB OTG transceiver on MSM chips. It + Enable this to support the USB OTG transceiver on Qualcomm chips. It handles PHY initialization, clock management, and workarounds required after resetting the hardware and power management. This driver is required even for peripheral only or host only From 37cfdaf782590e277d9352626dba4496734e0375 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:06 +0300 Subject: [PATCH 063/314] usb: phy: msm: Move global regulators variables to driver state Eliminating global variables allows driver to handle multiple device instances. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 82 +++++++++++++++++------------------ include/linux/usb/msm_hsusb.h | 3 ++ 2 files changed, 42 insertions(+), 43 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 5b37b81f2ef6..878f67d29ed5 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -58,47 +58,43 @@ #define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ #define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ -static struct regulator *hsusb_3p3; -static struct regulator *hsusb_1p8; -static struct regulator *hsusb_vddcx; - static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) { int ret = 0; if (init) { - hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX"); - if (IS_ERR(hsusb_vddcx)) { + motg->vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX"); + if (IS_ERR(motg->vddcx)) { dev_err(motg->phy.dev, "unable to get hsusb vddcx\n"); - return PTR_ERR(hsusb_vddcx); + return PTR_ERR(motg->vddcx); } - ret = regulator_set_voltage(hsusb_vddcx, + ret = regulator_set_voltage(motg->vddcx, USB_PHY_VDD_DIG_VOL_MIN, USB_PHY_VDD_DIG_VOL_MAX); if (ret) { dev_err(motg->phy.dev, "unable to set the voltage " "for hsusb vddcx\n"); - regulator_put(hsusb_vddcx); + regulator_put(motg->vddcx); return ret; } - ret = regulator_enable(hsusb_vddcx); + ret = regulator_enable(motg->vddcx); if (ret) { dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); - regulator_put(hsusb_vddcx); + regulator_put(motg->vddcx); } } else { - ret = regulator_set_voltage(hsusb_vddcx, 0, + ret = regulator_set_voltage(motg->vddcx, 0, USB_PHY_VDD_DIG_VOL_MAX); if (ret) dev_err(motg->phy.dev, "unable to set the voltage " "for hsusb vddcx\n"); - ret = regulator_disable(hsusb_vddcx); + ret = regulator_disable(motg->vddcx); if (ret) dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); - regulator_put(hsusb_vddcx); + regulator_put(motg->vddcx); } return ret; @@ -109,38 +105,38 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) int rc = 0; if (init) { - hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3"); - if (IS_ERR(hsusb_3p3)) { + motg->v3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3"); + if (IS_ERR(motg->v3p3)) { dev_err(motg->phy.dev, "unable to get hsusb 3p3\n"); - return PTR_ERR(hsusb_3p3); + return PTR_ERR(motg->v3p3); } - rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN, + rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN, USB_PHY_3P3_VOL_MAX); if (rc) { dev_err(motg->phy.dev, "unable to set voltage level " "for hsusb 3p3\n"); goto put_3p3; } - rc = regulator_enable(hsusb_3p3); + rc = regulator_enable(motg->v3p3); if (rc) { dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n"); goto put_3p3; } - hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8"); - if (IS_ERR(hsusb_1p8)) { + motg->v1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8"); + if (IS_ERR(motg->v1p8)) { dev_err(motg->phy.dev, "unable to get hsusb 1p8\n"); - rc = PTR_ERR(hsusb_1p8); + rc = PTR_ERR(motg->v1p8); goto disable_3p3; } - rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN, + rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN, USB_PHY_1P8_VOL_MAX); if (rc) { dev_err(motg->phy.dev, "unable to set voltage level " "for hsusb 1p8\n"); goto put_1p8; } - rc = regulator_enable(hsusb_1p8); + rc = regulator_enable(motg->v1p8); if (rc) { dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n"); goto put_1p8; @@ -149,54 +145,54 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) return 0; } - regulator_disable(hsusb_1p8); + regulator_disable(motg->v1p8); put_1p8: - regulator_put(hsusb_1p8); + regulator_put(motg->v1p8); disable_3p3: - regulator_disable(hsusb_3p3); + regulator_disable(motg->v3p3); put_3p3: - regulator_put(hsusb_3p3); + regulator_put(motg->v3p3); return rc; } -static int msm_hsusb_ldo_set_mode(int on) +static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) { int ret = 0; - if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) { + if (!motg->v1p8 || IS_ERR(motg->v1p8)) { pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); return -ENODEV; } - if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) { + if (!motg->v3p3 || IS_ERR(motg->v3p3)) { pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); return -ENODEV; } if (on) { - ret = regulator_set_optimum_mode(hsusb_1p8, + ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_HPM_LOAD); if (ret < 0) { pr_err("%s: Unable to set HPM of the regulator " "HSUSB_1p8\n", __func__); return ret; } - ret = regulator_set_optimum_mode(hsusb_3p3, + ret = regulator_set_optimum_mode(motg->v3p3, USB_PHY_3P3_HPM_LOAD); if (ret < 0) { pr_err("%s: Unable to set HPM of the regulator " "HSUSB_3p3\n", __func__); - regulator_set_optimum_mode(hsusb_1p8, + regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_LPM_LOAD); return ret; } } else { - ret = regulator_set_optimum_mode(hsusb_1p8, + ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_LPM_LOAD); if (ret < 0) pr_err("%s: Unable to set LPM of the regulator " "HSUSB_1p8\n", __func__); - ret = regulator_set_optimum_mode(hsusb_3p3, + ret = regulator_set_optimum_mode(motg->v3p3, USB_PHY_3P3_LPM_LOAD); if (ret < 0) pr_err("%s: Unable to set LPM of the regulator " @@ -417,7 +413,7 @@ static int msm_otg_reset(struct usb_phy *phy) #ifdef CONFIG_PM #define USB_PHY_SUSP_DIG_VOL 500000 -static int msm_hsusb_config_vddcx(int high) +static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high) { int max_vol = USB_PHY_VDD_DIG_VOL_MAX; int min_vol; @@ -428,7 +424,7 @@ static int msm_hsusb_config_vddcx(int high) else min_vol = USB_PHY_SUSP_DIG_VOL; - ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol); if (ret) { pr_err("%s: unable to set the voltage for regulator " "HSUSB_VDDCX\n", __func__); @@ -518,8 +514,8 @@ static int msm_otg_suspend(struct msm_otg *motg) if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && motg->pdata->otg_control == OTG_PMIC_CONTROL) { - msm_hsusb_ldo_set_mode(0); - msm_hsusb_config_vddcx(0); + msm_hsusb_ldo_set_mode(motg, 0); + msm_hsusb_config_vddcx(motg, 0); } if (device_may_wakeup(phy->dev)) @@ -555,8 +551,8 @@ static int msm_otg_resume(struct msm_otg *motg) if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && motg->pdata->otg_control == OTG_PMIC_CONTROL) { - msm_hsusb_ldo_set_mode(1); - msm_hsusb_config_vddcx(1); + msm_hsusb_ldo_set_mode(motg, 1); + msm_hsusb_config_vddcx(motg, 1); writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL); } @@ -1521,7 +1517,7 @@ static int __init msm_otg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "hsusb vreg configuration failed\n"); goto vddcx_exit; } - ret = msm_hsusb_ldo_set_mode(1); + ret = msm_hsusb_ldo_set_mode(motg, 1); if (ret) { dev_err(&pdev->dev, "hsusb vreg enable failed\n"); goto ldo_exit; diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 32754835a39b..8705b0164684 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -183,6 +183,9 @@ struct msm_otg { enum usb_chg_state chg_state; enum usb_chg_type chg_type; u8 dcd_retries; + struct regulator *v3p3; + struct regulator *v1p8; + struct regulator *vddcx; }; #endif From 06a6ec445bfa539285a7f6ae3e6e447a536d5a35 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:07 +0300 Subject: [PATCH 064/314] usb: phy: msm: Enable deferred driver probing Using platform_driver_probe() prevent driver from requesting probe deferral. Fix this. While at that, also switch to module_platform_driver() and remove __init annotation from probe(). Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 878f67d29ed5..b7d73f2f4bee 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1402,7 +1402,7 @@ static void msm_otg_debugfs_cleanup(void) debugfs_remove(msm_otg_dbg_root); } -static int __init msm_otg_probe(struct platform_device *pdev) +static int msm_otg_probe(struct platform_device *pdev) { int ret = 0; struct resource *res; @@ -1736,6 +1736,7 @@ static const struct dev_pm_ops msm_otg_dev_pm_ops = { }; static struct platform_driver msm_otg_driver = { + .probe = msm_otg_probe, .remove = msm_otg_remove, .driver = { .name = DRIVER_NAME, @@ -1744,7 +1745,7 @@ static struct platform_driver msm_otg_driver = { }, }; -module_platform_driver_probe(msm_otg_driver, msm_otg_probe); +module_platform_driver(msm_otg_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("MSM USB transceiver driver"); From 6b99c68ec1f979ef6ea956516a87afa9bb5551ca Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:08 +0300 Subject: [PATCH 065/314] usb: phy: msm: Migrate to Managed Device Resource allocation Move memory, regulators, clocks and irq allocation to devm_* variants. Properly check for valid clk handles. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 187 +++++++++++++--------------------- 1 file changed, 68 insertions(+), 119 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index b7d73f2f4bee..67705fcc4b2a 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -63,27 +63,18 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) int ret = 0; if (init) { - motg->vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX"); - if (IS_ERR(motg->vddcx)) { - dev_err(motg->phy.dev, "unable to get hsusb vddcx\n"); - return PTR_ERR(motg->vddcx); - } - ret = regulator_set_voltage(motg->vddcx, USB_PHY_VDD_DIG_VOL_MIN, USB_PHY_VDD_DIG_VOL_MAX); if (ret) { dev_err(motg->phy.dev, "unable to set the voltage " "for hsusb vddcx\n"); - regulator_put(motg->vddcx); return ret; } ret = regulator_enable(motg->vddcx); - if (ret) { + if (ret) dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); - regulator_put(motg->vddcx); - } } else { ret = regulator_set_voltage(motg->vddcx, 0, USB_PHY_VDD_DIG_VOL_MAX); @@ -93,8 +84,6 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) ret = regulator_disable(motg->vddcx); if (ret) dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); - - regulator_put(motg->vddcx); } return ret; @@ -105,53 +94,38 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) int rc = 0; if (init) { - motg->v3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3"); - if (IS_ERR(motg->v3p3)) { - dev_err(motg->phy.dev, "unable to get hsusb 3p3\n"); - return PTR_ERR(motg->v3p3); - } - rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN, USB_PHY_3P3_VOL_MAX); if (rc) { dev_err(motg->phy.dev, "unable to set voltage level " "for hsusb 3p3\n"); - goto put_3p3; + goto exit; } rc = regulator_enable(motg->v3p3); if (rc) { dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n"); - goto put_3p3; - } - motg->v1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8"); - if (IS_ERR(motg->v1p8)) { - dev_err(motg->phy.dev, "unable to get hsusb 1p8\n"); - rc = PTR_ERR(motg->v1p8); - goto disable_3p3; + goto exit; } rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN, USB_PHY_1P8_VOL_MAX); if (rc) { dev_err(motg->phy.dev, "unable to set voltage level " "for hsusb 1p8\n"); - goto put_1p8; + goto disable_3p3; } rc = regulator_enable(motg->v1p8); if (rc) { dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n"); - goto put_1p8; + goto disable_3p3; } return 0; } regulator_disable(motg->v1p8); -put_1p8: - regulator_put(motg->v1p8); disable_3p3: regulator_disable(motg->v3p3); -put_3p3: - regulator_put(motg->v3p3); +exit: return rc; } @@ -506,7 +480,7 @@ static int msm_otg_suspend(struct msm_otg *motg) clk_disable_unprepare(motg->pclk); clk_disable_unprepare(motg->clk); - if (motg->core_clk) + if (!IS_ERR(motg->core_clk)) clk_disable_unprepare(motg->core_clk); if (!IS_ERR(motg->pclk_src)) @@ -546,7 +520,7 @@ static int msm_otg_resume(struct msm_otg *motg) clk_prepare_enable(motg->pclk); clk_prepare_enable(motg->clk); - if (motg->core_clk) + if (!IS_ERR(motg->core_clk)) clk_prepare_enable(motg->core_clk); if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && @@ -1404,6 +1378,7 @@ static void msm_otg_debugfs_cleanup(void) static int msm_otg_probe(struct platform_device *pdev) { + struct regulator_bulk_data regs[3]; int ret = 0; struct resource *res; struct msm_otg *motg; @@ -1415,37 +1390,34 @@ static int msm_otg_probe(struct platform_device *pdev) return -ENODEV; } - motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL); + motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL); if (!motg) { dev_err(&pdev->dev, "unable to allocate msm_otg\n"); return -ENOMEM; } - motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), + GFP_KERNEL); if (!motg->phy.otg) { dev_err(&pdev->dev, "unable to allocate msm_otg\n"); - ret = -ENOMEM; - goto free_motg; + return -ENOMEM; } motg->pdata = dev_get_platdata(&pdev->dev); phy = &motg->phy; phy->dev = &pdev->dev; - motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk"); + motg->phy_reset_clk = devm_clk_get(&pdev->dev, "usb_phy_clk"); if (IS_ERR(motg->phy_reset_clk)) { dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); - ret = PTR_ERR(motg->phy_reset_clk); - goto free_motg; + return PTR_ERR(motg->phy_reset_clk); } - motg->clk = clk_get(&pdev->dev, "usb_hs_clk"); + motg->clk = devm_clk_get(&pdev->dev, "usb_hs_clk"); if (IS_ERR(motg->clk)) { dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); - ret = PTR_ERR(motg->clk); - goto put_phy_reset_clk; + return PTR_ERR(motg->clk); } - clk_set_rate(motg->clk, 60000000); /* * If USB Core is running its protocol engine based on CORE CLK, @@ -1454,22 +1426,18 @@ static int msm_otg_probe(struct platform_device *pdev) * CORE CLK. For such USB cores, vote for maximum clk frequency * on pclk source */ + motg->pclk_src = ERR_PTR(-ENOENT); if (motg->pdata->pclk_src_name) { - motg->pclk_src = clk_get(&pdev->dev, - motg->pdata->pclk_src_name); + motg->pclk_src = devm_clk_get(&pdev->dev, + motg->pdata->pclk_src_name); if (IS_ERR(motg->pclk_src)) - goto put_clk; - clk_set_rate(motg->pclk_src, INT_MAX); - clk_prepare_enable(motg->pclk_src); - } else - motg->pclk_src = ERR_PTR(-ENOENT); + return PTR_ERR(motg->pclk_src); + } - - motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk"); + motg->pclk = devm_clk_get(&pdev->dev, "usb_hs_pclk"); if (IS_ERR(motg->pclk)) { dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); - ret = PTR_ERR(motg->pclk); - goto put_pclk_src; + return PTR_ERR(motg->pclk); } /* @@ -1477,65 +1445,72 @@ static int msm_otg_probe(struct platform_device *pdev) * clock is introduced to remove the dependency on AXI * bus frequency. */ - motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk"); - if (IS_ERR(motg->core_clk)) - motg->core_clk = NULL; + motg->core_clk = devm_clk_get(&pdev->dev, "usb_hs_core_clk"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get platform resource mem\n"); - ret = -ENODEV; - goto put_core_clk; - } + motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (IS_ERR(motg->regs)) + return PTR_ERR(motg->regs); - motg->regs = ioremap(res->start, resource_size(res)); - if (!motg->regs) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto put_core_clk; - } dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); motg->irq = platform_get_irq(pdev, 0); if (!motg->irq) { dev_err(&pdev->dev, "platform_get_irq failed\n"); - ret = -ENODEV; - goto free_regs; + return motg->irq; + } + + regs[0].supply = "HSUSB_VDDCX"; + regs[1].supply = "HSUSB_3p3"; + regs[2].supply = "HSUSB_1p8"; + + ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs); + if (ret) + return ret; + + motg->vddcx = regs[0].consumer; + motg->v3p3 = regs[1].consumer; + motg->v1p8 = regs[2].consumer; + + clk_set_rate(motg->clk, 60000000); + if (!IS_ERR(motg->pclk_src)) { + clk_set_rate(motg->pclk_src, INT_MAX); + clk_prepare_enable(motg->pclk_src); } clk_prepare_enable(motg->clk); clk_prepare_enable(motg->pclk); + if (!IS_ERR(motg->core_clk)) + clk_prepare_enable(motg->core_clk); + ret = msm_hsusb_init_vddcx(motg, 1); if (ret) { dev_err(&pdev->dev, "hsusb vddcx configuration failed\n"); - goto free_regs; + goto disable_clks; } ret = msm_hsusb_ldo_init(motg, 1); if (ret) { dev_err(&pdev->dev, "hsusb vreg configuration failed\n"); - goto vddcx_exit; + goto disable_vddcx; } ret = msm_hsusb_ldo_set_mode(motg, 1); if (ret) { dev_err(&pdev->dev, "hsusb vreg enable failed\n"); - goto ldo_exit; + goto disable_ldo; } - if (motg->core_clk) - clk_prepare_enable(motg->core_clk); - writel(0, USB_USBINTR); writel(0, USB_OTGSC); INIT_WORK(&motg->sm_work, msm_otg_sm_work); INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work); - ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED, + ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED, "msm_otg", motg); if (ret) { dev_err(&pdev->dev, "request irq failed\n"); - goto disable_clks; + goto disable_ldo; } phy->init = msm_otg_reset; @@ -1550,7 +1525,7 @@ static int msm_otg_probe(struct platform_device *pdev) ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); if (ret) { dev_err(&pdev->dev, "usb_add_phy failed\n"); - goto free_irq; + goto disable_ldo; } platform_set_drvdata(pdev, motg); @@ -1568,33 +1543,18 @@ static int msm_otg_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); return 0; -free_irq: - free_irq(motg->irq, motg); + +disable_ldo: + msm_hsusb_ldo_init(motg, 0); +disable_vddcx: + msm_hsusb_init_vddcx(motg, 0); disable_clks: clk_disable_unprepare(motg->pclk); clk_disable_unprepare(motg->clk); -ldo_exit: - msm_hsusb_ldo_init(motg, 0); -vddcx_exit: - msm_hsusb_init_vddcx(motg, 0); -free_regs: - iounmap(motg->regs); -put_core_clk: - if (motg->core_clk) - clk_put(motg->core_clk); - clk_put(motg->pclk); -put_pclk_src: - if (!IS_ERR(motg->pclk_src)) { + if (!IS_ERR(motg->core_clk)) + clk_disable_unprepare(motg->core_clk); + if (!IS_ERR(motg->pclk_src)) clk_disable_unprepare(motg->pclk_src); - clk_put(motg->pclk_src); - } -put_clk: - clk_put(motg->clk); -put_phy_reset_clk: - clk_put(motg->phy_reset_clk); -free_motg: - kfree(motg->phy.otg); - kfree(motg); return ret; } @@ -1617,7 +1577,7 @@ static int msm_otg_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); usb_remove_phy(phy); - free_irq(motg->irq, motg); + disable_irq(motg->irq); /* * Put PHY in low power mode. @@ -1637,26 +1597,15 @@ static int msm_otg_remove(struct platform_device *pdev) clk_disable_unprepare(motg->pclk); clk_disable_unprepare(motg->clk); - if (motg->core_clk) + if (!IS_ERR(motg->core_clk)) clk_disable_unprepare(motg->core_clk); - if (!IS_ERR(motg->pclk_src)) { + if (!IS_ERR(motg->pclk_src)) clk_disable_unprepare(motg->pclk_src); - clk_put(motg->pclk_src); - } + msm_hsusb_ldo_init(motg, 0); - iounmap(motg->regs); pm_runtime_set_suspended(&pdev->dev); - clk_put(motg->phy_reset_clk); - clk_put(motg->pclk); - clk_put(motg->clk); - if (motg->core_clk) - clk_put(motg->core_clk); - - kfree(motg->phy.otg); - kfree(motg); - return 0; } From f7ddad47421669452186678d51c09a3778ab552f Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:09 +0300 Subject: [PATCH 066/314] usb: phy: msm: Remove unnecessarily check for valid regulators. Whether regulators are available or not is checked at driver probe. If they are not available driver will refuse to load, so no need to check them again. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 67705fcc4b2a..d7b83600a7da 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -133,16 +133,6 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) { int ret = 0; - if (!motg->v1p8 || IS_ERR(motg->v1p8)) { - pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); - return -ENODEV; - } - - if (!motg->v3p3 || IS_ERR(motg->v3p3)) { - pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); - return -ENODEV; - } - if (on) { ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_HPM_LOAD); From 3aca0fa95f61918d5b78b683c0fbcbf693579f81 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:10 +0300 Subject: [PATCH 067/314] usb: phy: msm: Fix checkpatch.pl warnings This fixes following: WARNING: quoted string split across lines WARNING: Prefer seq_puts to seq_printf Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 39 +++++++++++++---------------------- 1 file changed, 14 insertions(+), 25 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index d7b83600a7da..874c51a85683 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -67,8 +67,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) USB_PHY_VDD_DIG_VOL_MIN, USB_PHY_VDD_DIG_VOL_MAX); if (ret) { - dev_err(motg->phy.dev, "unable to set the voltage " - "for hsusb vddcx\n"); + dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); return ret; } @@ -79,8 +78,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) ret = regulator_set_voltage(motg->vddcx, 0, USB_PHY_VDD_DIG_VOL_MAX); if (ret) - dev_err(motg->phy.dev, "unable to set the voltage " - "for hsusb vddcx\n"); + dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); ret = regulator_disable(motg->vddcx); if (ret) dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); @@ -97,8 +95,7 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN, USB_PHY_3P3_VOL_MAX); if (rc) { - dev_err(motg->phy.dev, "unable to set voltage level " - "for hsusb 3p3\n"); + dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n"); goto exit; } rc = regulator_enable(motg->v3p3); @@ -109,8 +106,7 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN, USB_PHY_1P8_VOL_MAX); if (rc) { - dev_err(motg->phy.dev, "unable to set voltage level " - "for hsusb 1p8\n"); + dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n"); goto disable_3p3; } rc = regulator_enable(motg->v1p8); @@ -137,15 +133,13 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_HPM_LOAD); if (ret < 0) { - pr_err("%s: Unable to set HPM of the regulator " - "HSUSB_1p8\n", __func__); + pr_err("Could not set HPM for v1p8\n"); return ret; } ret = regulator_set_optimum_mode(motg->v3p3, USB_PHY_3P3_HPM_LOAD); if (ret < 0) { - pr_err("%s: Unable to set HPM of the regulator " - "HSUSB_3p3\n", __func__); + pr_err("Could not set HPM for v3p3\n"); regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_LPM_LOAD); return ret; @@ -154,13 +148,11 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_LPM_LOAD); if (ret < 0) - pr_err("%s: Unable to set LPM of the regulator " - "HSUSB_1p8\n", __func__); + pr_err("Could not set LPM for v1p8\n"); ret = regulator_set_optimum_mode(motg->v3p3, USB_PHY_3P3_LPM_LOAD); if (ret < 0) - pr_err("%s: Unable to set LPM of the regulator " - "HSUSB_3p3\n", __func__); + pr_err("Could not set LPM for v3p3\n"); } pr_debug("reg (%s)\n", on ? "HPM" : "LPM"); @@ -390,8 +382,7 @@ static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high) ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol); if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); + pr_err("Cannot set vddcx voltage\n"); return ret; } @@ -546,8 +537,7 @@ static int msm_otg_resume(struct msm_otg *motg) * PHY. USB state can not be restored. Re-insertion * of USB cable is the only way to get USB working. */ - dev_err(phy->dev, "Unable to resume USB." - "Re-plugin the cable\n"); + dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n"); msm_otg_reset(phy); } @@ -1242,13 +1232,13 @@ static int msm_otg_mode_show(struct seq_file *s, void *unused) switch (otg->phy->state) { case OTG_STATE_A_HOST: - seq_printf(s, "host\n"); + seq_puts(s, "host\n"); break; case OTG_STATE_B_PERIPHERAL: - seq_printf(s, "peripheral\n"); + seq_puts(s, "peripheral\n"); break; default: - seq_printf(s, "none\n"); + seq_puts(s, "none\n"); break; } @@ -1525,8 +1515,7 @@ static int msm_otg_probe(struct platform_device *pdev) motg->pdata->otg_control == OTG_USER_CONTROL) { ret = msm_otg_debugfs_init(motg); if (ret) - dev_dbg(&pdev->dev, "mode debugfs file is" - "not available\n"); + dev_dbg(&pdev->dev, "Can not create mode change file\n"); } pm_runtime_set_active(&pdev->dev); From 971232cf7c7a71ad3cbf433f592eee3ae1a578ac Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:11 +0300 Subject: [PATCH 068/314] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Use enum usb_dr_mode and drop default usb_dr_mode from platform data. USB DT bindings states: dr_mode: "...In case this attribute isn't passed via DT, USB DRD controllers should default to OTG...", so remove redundand field. Signed-off-by: Ivan T. Ivanov Acked-by: David Brown Signed-off-by: Felipe Balbi --- arch/arm/mach-msm/board-msm7x30.c | 2 +- arch/arm/mach-msm/board-qsd8x50.c | 2 +- drivers/usb/phy/phy-msm-usb.c | 41 +++++++++++++------------------ include/linux/usb/msm_hsusb.h | 20 +-------------- 4 files changed, 20 insertions(+), 45 deletions(-) diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 46de789ad3ae..0c4c200e1221 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -95,7 +95,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk) static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_PERIPHERAL, + .mode = USB_DR_MODE_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, .link_clk_reset = hsusb_link_clk_reset, .phy_clk_reset = hsusb_phy_clk_reset, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 9169ec324a43..4c748616ef47 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -116,7 +116,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk) static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_PERIPHERAL, + .mode = USB_DR_MODE_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, .link_clk_reset = hsusb_link_clk_reset, .phy_clk_reset = hsusb_phy_clk_reset, diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 874c51a85683..7eb2abf3f874 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -348,10 +348,10 @@ static int msm_otg_reset(struct usb_phy *phy) if (pdata->otg_control == OTG_PHY_CONTROL) { val = readl(USB_OTGSC); - if (pdata->mode == USB_OTG) { + if (pdata->mode == USB_DR_MODE_OTG) { ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID; val |= OTGSC_IDIE | OTGSC_BSVIE; - } else if (pdata->mode == USB_PERIPHERAL) { + } else if (pdata->mode == USB_DR_MODE_PERIPHERAL) { ulpi_val = ULPI_INT_SESS_VALID; val |= OTGSC_BSVIE; } @@ -637,7 +637,7 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) * Fail host registration if this board can support * only peripheral configuration. */ - if (motg->pdata->mode == USB_PERIPHERAL) { + if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) { dev_info(otg->phy->dev, "Host mode is not supported\n"); return -ENODEV; } @@ -666,7 +666,7 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) * Kick the state machine work, if peripheral is not supported * or peripheral is already registered with us. */ - if (motg->pdata->mode == USB_HOST || otg->gadget) { + if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) { pm_runtime_get_sync(otg->phy->dev); schedule_work(&motg->sm_work); } @@ -710,7 +710,7 @@ static int msm_otg_set_peripheral(struct usb_otg *otg, * Fail peripheral registration if this board can support * only host configuration. */ - if (motg->pdata->mode == USB_HOST) { + if (motg->pdata->mode == USB_DR_MODE_HOST) { dev_info(otg->phy->dev, "Peripheral mode is not supported\n"); return -ENODEV; } @@ -735,7 +735,7 @@ static int msm_otg_set_peripheral(struct usb_otg *otg, * Kick the state machine work, if host is not supported * or host is already registered with us. */ - if (motg->pdata->mode == USB_PERIPHERAL || otg->host) { + if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) { pm_runtime_get_sync(otg->phy->dev); schedule_work(&motg->sm_work); } @@ -1056,7 +1056,7 @@ static void msm_otg_init_sm(struct msm_otg *motg) u32 otgsc = readl(USB_OTGSC); switch (pdata->mode) { - case USB_OTG: + case USB_DR_MODE_OTG: if (pdata->otg_control == OTG_PHY_CONTROL) { if (otgsc & OTGSC_ID) set_bit(ID, &motg->inputs); @@ -1068,21 +1068,14 @@ static void msm_otg_init_sm(struct msm_otg *motg) else clear_bit(B_SESS_VLD, &motg->inputs); } else if (pdata->otg_control == OTG_USER_CONTROL) { - if (pdata->default_mode == USB_HOST) { - clear_bit(ID, &motg->inputs); - } else if (pdata->default_mode == USB_PERIPHERAL) { - set_bit(ID, &motg->inputs); - set_bit(B_SESS_VLD, &motg->inputs); - } else { set_bit(ID, &motg->inputs); clear_bit(B_SESS_VLD, &motg->inputs); - } } break; - case USB_HOST: + case USB_DR_MODE_HOST: clear_bit(ID, &motg->inputs); break; - case USB_PERIPHERAL: + case USB_DR_MODE_PERIPHERAL: set_bit(ID, &motg->inputs); if (otgsc & OTGSC_BSV) set_bit(B_SESS_VLD, &motg->inputs); @@ -1258,7 +1251,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, char buf[16]; struct usb_otg *otg = motg->phy.otg; int status = count; - enum usb_mode_type req_mode; + enum usb_dr_mode req_mode; memset(buf, 0x00, sizeof(buf)); @@ -1268,18 +1261,18 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, } if (!strncmp(buf, "host", 4)) { - req_mode = USB_HOST; + req_mode = USB_DR_MODE_HOST; } else if (!strncmp(buf, "peripheral", 10)) { - req_mode = USB_PERIPHERAL; + req_mode = USB_DR_MODE_PERIPHERAL; } else if (!strncmp(buf, "none", 4)) { - req_mode = USB_NONE; + req_mode = USB_DR_MODE_UNKNOWN; } else { status = -EINVAL; goto out; } switch (req_mode) { - case USB_NONE: + case USB_DR_MODE_UNKNOWN: switch (otg->phy->state) { case OTG_STATE_A_HOST: case OTG_STATE_B_PERIPHERAL: @@ -1290,7 +1283,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, goto out; } break; - case USB_PERIPHERAL: + case USB_DR_MODE_PERIPHERAL: switch (otg->phy->state) { case OTG_STATE_B_IDLE: case OTG_STATE_A_HOST: @@ -1301,7 +1294,7 @@ static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, goto out; } break; - case USB_HOST: + case USB_DR_MODE_HOST: switch (otg->phy->state) { case OTG_STATE_B_IDLE: case OTG_STATE_B_PERIPHERAL: @@ -1511,7 +1504,7 @@ static int msm_otg_probe(struct platform_device *pdev) platform_set_drvdata(pdev, motg); device_init_wakeup(&pdev->dev, 1); - if (motg->pdata->mode == USB_OTG && + if (motg->pdata->mode == USB_DR_MODE_OTG && motg->pdata->otg_control == OTG_USER_CONTROL) { ret = msm_otg_debugfs_init(motg); if (ret) diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 8705b0164684..72c5830455bf 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -22,21 +22,6 @@ #include #include -/** - * Supported USB modes - * - * USB_PERIPHERAL Only peripheral mode is supported. - * USB_HOST Only host mode is supported. - * USB_OTG OTG mode is supported. - * - */ -enum usb_mode_type { - USB_NONE = 0, - USB_PERIPHERAL, - USB_HOST, - USB_OTG, -}; - /** * OTG control * @@ -121,8 +106,6 @@ enum usb_chg_type { * @power_budget: VBUS power budget in mA (0 will be treated as 500mA). * @mode: Supported mode (OTG/peripheral/host). * @otg_control: OTG switch controlled by user/Id pin - * @default_mode: Default operational mode. Applicable only if - * OTG switch is controller by user. * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k * dfab_usb_hs_clk in case of 8660 and 8960. */ @@ -130,9 +113,8 @@ struct msm_otg_platform_data { int *phy_init_seq; void (*vbus_power)(bool on); unsigned power_budget; - enum usb_mode_type mode; + enum usb_dr_mode mode; enum otg_control_type otg_control; - enum usb_mode_type default_mode; enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); char *pclk_src_name; From ff0e4a68c931dc34e43c081d1b6a895a9aaf8a2b Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:12 +0300 Subject: [PATCH 069/314] usb: phy: msm: Remove unused pclk_src_name There are no references to 'pclk_src_name' in plaform code, so it is unused. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 26 +------------------------- include/linux/usb/msm_hsusb.h | 5 ----- 2 files changed, 1 insertion(+), 30 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 7eb2abf3f874..c2361bfd2002 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -464,9 +464,6 @@ static int msm_otg_suspend(struct msm_otg *motg) if (!IS_ERR(motg->core_clk)) clk_disable_unprepare(motg->core_clk); - if (!IS_ERR(motg->pclk_src)) - clk_disable_unprepare(motg->pclk_src); - if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && motg->pdata->otg_control == OTG_PMIC_CONTROL) { msm_hsusb_ldo_set_mode(motg, 0); @@ -496,9 +493,6 @@ static int msm_otg_resume(struct msm_otg *motg) if (!atomic_read(&motg->in_lpm)) return 0; - if (!IS_ERR(motg->pclk_src)) - clk_prepare_enable(motg->pclk_src); - clk_prepare_enable(motg->pclk); clk_prepare_enable(motg->clk); if (!IS_ERR(motg->core_clk)) @@ -1396,17 +1390,8 @@ static int msm_otg_probe(struct platform_device *pdev) * If USB Core is running its protocol engine based on CORE CLK, * CORE CLK must be running at >55Mhz for correct HSUSB * operation and USB core cannot tolerate frequency changes on - * CORE CLK. For such USB cores, vote for maximum clk frequency - * on pclk source + * CORE CLK. */ - motg->pclk_src = ERR_PTR(-ENOENT); - if (motg->pdata->pclk_src_name) { - motg->pclk_src = devm_clk_get(&pdev->dev, - motg->pdata->pclk_src_name); - if (IS_ERR(motg->pclk_src)) - return PTR_ERR(motg->pclk_src); - } - motg->pclk = devm_clk_get(&pdev->dev, "usb_hs_pclk"); if (IS_ERR(motg->pclk)) { dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); @@ -1446,10 +1431,6 @@ static int msm_otg_probe(struct platform_device *pdev) motg->v1p8 = regs[2].consumer; clk_set_rate(motg->clk, 60000000); - if (!IS_ERR(motg->pclk_src)) { - clk_set_rate(motg->pclk_src, INT_MAX); - clk_prepare_enable(motg->pclk_src); - } clk_prepare_enable(motg->clk); clk_prepare_enable(motg->pclk); @@ -1525,8 +1506,6 @@ disable_clks: clk_disable_unprepare(motg->clk); if (!IS_ERR(motg->core_clk)) clk_disable_unprepare(motg->core_clk); - if (!IS_ERR(motg->pclk_src)) - clk_disable_unprepare(motg->pclk_src); return ret; } @@ -1571,9 +1550,6 @@ static int msm_otg_remove(struct platform_device *pdev) clk_disable_unprepare(motg->clk); if (!IS_ERR(motg->core_clk)) clk_disable_unprepare(motg->core_clk); - if (!IS_ERR(motg->pclk_src)) - clk_disable_unprepare(motg->pclk_src); - msm_hsusb_ldo_init(motg, 0); pm_runtime_set_suspended(&pdev->dev); diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 72c5830455bf..262ed80a0b9e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -106,8 +106,6 @@ enum usb_chg_type { * @power_budget: VBUS power budget in mA (0 will be treated as 500mA). * @mode: Supported mode (OTG/peripheral/host). * @otg_control: OTG switch controlled by user/Id pin - * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k - * dfab_usb_hs_clk in case of 8660 and 8960. */ struct msm_otg_platform_data { int *phy_init_seq; @@ -117,7 +115,6 @@ struct msm_otg_platform_data { enum otg_control_type otg_control; enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); - char *pclk_src_name; int (*link_clk_reset)(struct clk *link_clk, bool assert); int (*phy_clk_reset)(struct clk *phy_clk); }; @@ -129,7 +126,6 @@ struct msm_otg_platform_data { * @irq: IRQ number assigned for HSUSB controller. * @clk: clock struct of usb_hs_clk. * @pclk: clock struct of usb_hs_pclk. - * @pclk_src: pclk source for voting. * @phy_reset_clk: clock struct of usb_phy_clk. * @core_clk: clock struct of usb_hs_core_clk. * @regs: ioremapped register base address. @@ -150,7 +146,6 @@ struct msm_otg { int irq; struct clk *clk; struct clk *pclk; - struct clk *pclk_src; struct clk *phy_reset_clk; struct clk *core_clk; void __iomem *regs; From f5ef2372f608df4bb54b4fc7c9e43fb8bbef4795 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:13 +0300 Subject: [PATCH 070/314] usb: phy: msm: Remove HSUSB prefix from regulator names Prefix did not bring any useful information. Currently none of the MSM platforms define these regulators, so it is safe to rename them. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index c2361bfd2002..bd9e286ccd66 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1418,9 +1418,9 @@ static int msm_otg_probe(struct platform_device *pdev) return motg->irq; } - regs[0].supply = "HSUSB_VDDCX"; - regs[1].supply = "HSUSB_3p3"; - regs[2].supply = "HSUSB_1p8"; + regs[0].supply = "vddcx"; + regs[1].supply = "v3p3"; + regs[2].supply = "v1p8"; ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs); if (ret) From f60c114a3ae528dfc6750baad58cf822d0b282a2 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:14 +0300 Subject: [PATCH 071/314] usb: phy: msm: Properly check result from platform_get_irq() Function return negative code on error. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index bd9e286ccd66..7e968aa143ce 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1413,7 +1413,7 @@ static int msm_otg_probe(struct platform_device *pdev) dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); motg->irq = platform_get_irq(pdev, 0); - if (!motg->irq) { + if (motg->irq < 0) { dev_err(&pdev->dev, "platform_get_irq failed\n"); return motg->irq; } From 8364f9af237f47fa128bd4e4f7b45beef890c994 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:15 +0300 Subject: [PATCH 072/314] usb: phy: msm: Add device tree support and binding information Allows controller to be specified via device tree. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/msm-hsusb.txt | 67 +++++++++++ drivers/usb/phy/phy-msm-usb.c | 113 +++++++++++++++--- include/linux/usb/msm_hsusb.h | 6 +- 3 files changed, 165 insertions(+), 21 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 5ea26c631e3a..ee4123de3de4 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -15,3 +15,70 @@ Example EHCI controller device node: usb-phy = <&usb_otg>; }; +USB PHY with optional OTG: + +Required properties: +- compatible: Should contain: + "qcom,usb-otg-ci" for chipsets with ChipIdea 45nm PHY + "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY + +- regs: Offset and length of the register set in the memory map +- interrupts: interrupt-specifier for the OTG interrupt. + +- clocks: A list of phandle + clock-specifier pairs for the + clocks listed in clock-names +- clock-names: Should contain the following: + "phy" USB PHY reference clock + "core" Protocol engine clock + "iface" Interface bus clock + "alt_core" Protocol engine clock for targets with asynchronous + reset methodology. (optional) + +- vdccx-supply: phandle to the regulator for the vdd supply for + digital circuit operation. +- v1p8-supply: phandle to the regulator for the 1.8V supply +- v3p3-supply: phandle to the regulator for the 3.3V supply + +- resets: A list of phandle + reset-specifier pairs for the + resets listed in reset-names +- reset-names: Should contain the following: + "phy" USB PHY controller reset + "link" USB LINK controller reset + +- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of + 1 - PHY control + 2 - PMIC control + +Optional properties: +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" + +- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device + Mode Eye Diagram test. Start address at which these values will be + written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as + "do not overwrite default value at this address". + For example: qcom,phy-init-sequence = < -1 0x63 >; + Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1. + +Example HSUSB OTG controller device node: + + usb@f9a55000 { + compatible = "qcom,usb-otg-snps"; + reg = <0xf9a55000 0x400>; + interrupts = <0 134 0>; + dr_mode = "peripheral"; + + clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB_HS_AHB_CLK>; + + clock-names = "phy", "core", "iface"; + + vddcx-supply = <&pm8841_s2_corner>; + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + + qcom,otg-control = <1>; + qcom,phy-init-sequence = < -1 0x63 >; + }; diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 7e968aa143ce..1bf2d4ee29d2 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -30,9 +30,12 @@ #include #include #include +#include +#include #include #include +#include #include #include #include @@ -217,16 +220,16 @@ static struct usb_phy_io_ops msm_otg_io_ops = { static void ulpi_init(struct msm_otg *motg) { struct msm_otg_platform_data *pdata = motg->pdata; - int *seq = pdata->phy_init_seq; + int *seq = pdata->phy_init_seq, idx; + u32 addr = ULPI_EXT_VENDOR_SPECIFIC; - if (!seq) - return; + for (idx = 0; idx < pdata->phy_init_sz; idx++) { + if (seq[idx] == -1) + continue; - while (seq[0] >= 0) { dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n", - seq[0], seq[1]); - ulpi_write(&motg->phy, seq[0], seq[1]); - seq += 2; + seq[idx], addr + idx); + ulpi_write(&motg->phy, seq[idx], addr + idx); } } @@ -1343,26 +1346,96 @@ static void msm_otg_debugfs_cleanup(void) debugfs_remove(msm_otg_dbg_root); } +static struct of_device_id msm_otg_dt_match[] = { + { + .compatible = "qcom,usb-otg-ci", + .data = (void *) CI_45NM_INTEGRATED_PHY + }, + { + .compatible = "qcom,usb-otg-snps", + .data = (void *) SNPS_28NM_INTEGRATED_PHY + }, + { } +}; +MODULE_DEVICE_TABLE(of, msm_otg_dt_match); + +static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) +{ + struct msm_otg_platform_data *pdata; + const struct of_device_id *id; + struct device_node *node = pdev->dev.of_node; + struct property *prop; + int len, ret, words; + u32 val; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + motg->pdata = pdata; + + id = of_match_device(msm_otg_dt_match, &pdev->dev); + pdata->phy_type = (int) id->data; + + pdata->mode = of_usb_get_dr_mode(node); + if (pdata->mode == USB_DR_MODE_UNKNOWN) + pdata->mode = USB_DR_MODE_OTG; + + pdata->otg_control = OTG_PHY_CONTROL; + if (!of_property_read_u32(node, "qcom,otg-control", &val)) + if (val == OTG_PMIC_CONTROL) + pdata->otg_control = val; + + prop = of_find_property(node, "qcom,phy-init-sequence", &len); + if (!prop || !len) + return 0; + + words = len / sizeof(u32); + + if (words >= ULPI_EXT_VENDOR_SPECIFIC) { + dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words); + return 0; + } + + pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); + if (!pdata->phy_init_seq) { + dev_warn(&pdev->dev, "No space for PHY init sequence\n"); + return 0; + } + + ret = of_property_read_u32_array(node, "qcom,phy-init-sequence", + pdata->phy_init_seq, words); + if (!ret) + pdata->phy_init_sz = words; + + return 0; +} + static int msm_otg_probe(struct platform_device *pdev) { struct regulator_bulk_data regs[3]; int ret = 0; + struct device_node *np = pdev->dev.of_node; + struct msm_otg_platform_data *pdata; struct resource *res; struct msm_otg *motg; struct usb_phy *phy; - dev_info(&pdev->dev, "msm_otg probe\n"); - if (!dev_get_platdata(&pdev->dev)) { - dev_err(&pdev->dev, "No platform data given. Bailing out\n"); - return -ENODEV; - } - motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL); if (!motg) { dev_err(&pdev->dev, "unable to allocate msm_otg\n"); return -ENOMEM; } + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + if (!np) + return -ENXIO; + ret = msm_otg_read_dt(pdev, motg); + if (ret) + return ret; + } + motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), GFP_KERNEL); if (!motg->phy.otg) { @@ -1370,17 +1443,17 @@ static int msm_otg_probe(struct platform_device *pdev) return -ENOMEM; } - motg->pdata = dev_get_platdata(&pdev->dev); phy = &motg->phy; phy->dev = &pdev->dev; - motg->phy_reset_clk = devm_clk_get(&pdev->dev, "usb_phy_clk"); + motg->phy_reset_clk = devm_clk_get(&pdev->dev, + np ? "phy" : "usb_phy_clk"); if (IS_ERR(motg->phy_reset_clk)) { dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); return PTR_ERR(motg->phy_reset_clk); } - motg->clk = devm_clk_get(&pdev->dev, "usb_hs_clk"); + motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk"); if (IS_ERR(motg->clk)) { dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); return PTR_ERR(motg->clk); @@ -1392,7 +1465,7 @@ static int msm_otg_probe(struct platform_device *pdev) * operation and USB core cannot tolerate frequency changes on * CORE CLK. */ - motg->pclk = devm_clk_get(&pdev->dev, "usb_hs_pclk"); + motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk"); if (IS_ERR(motg->pclk)) { dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); return PTR_ERR(motg->pclk); @@ -1403,7 +1476,8 @@ static int msm_otg_probe(struct platform_device *pdev) * clock is introduced to remove the dependency on AXI * bus frequency. */ - motg->core_clk = devm_clk_get(&pdev->dev, "usb_hs_core_clk"); + motg->core_clk = devm_clk_get(&pdev->dev, + np ? "alt_core" : "usb_hs_core_clk"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); @@ -1486,7 +1560,7 @@ static int msm_otg_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); if (motg->pdata->mode == USB_DR_MODE_OTG && - motg->pdata->otg_control == OTG_USER_CONTROL) { + motg->pdata->otg_control == OTG_USER_CONTROL) { ret = msm_otg_debugfs_init(motg); if (ret) dev_dbg(&pdev->dev, "Can not create mode change file\n"); @@ -1639,6 +1713,7 @@ static struct platform_driver msm_otg_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .pm = &msm_otg_dev_pm_ops, + .of_match_table = msm_otg_dt_match, }, }; diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 262ed80a0b9e..bd68299c278e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -100,8 +100,9 @@ enum usb_chg_type { /** * struct msm_otg_platform_data - platform device data * for msm_otg driver. - * @phy_init_seq: PHY configuration sequence. val, reg pairs - * terminated by -1. + * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as + * "do not overwrite default vaule at this address". + * @phy_init_sz: PHY configuration sequence size. * @vbus_power: VBUS power on/off routine. * @power_budget: VBUS power budget in mA (0 will be treated as 500mA). * @mode: Supported mode (OTG/peripheral/host). @@ -109,6 +110,7 @@ enum usb_chg_type { */ struct msm_otg_platform_data { int *phy_init_seq; + int phy_init_sz; void (*vbus_power)(bool on); unsigned power_budget; enum usb_dr_mode mode; From a27345434134080273e0597e1d9721ff9e6ca67f Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:16 +0300 Subject: [PATCH 073/314] usb: phy: msm: Use reset framework for LINK and PHY resets Using reset framework eliminate need of platform specific callbacks and enable reset lines to be specified in DT files. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 29 +++++++++++++++++++++-------- include/linux/usb/msm_hsusb.h | 3 +++ 2 files changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 1bf2d4ee29d2..a6abb1b3a7f0 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -235,12 +236,15 @@ static void ulpi_init(struct msm_otg *motg) static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) { - int ret = 0; + int ret; - if (!motg->pdata->link_clk_reset) - return ret; + if (motg->pdata->link_clk_reset) + ret = motg->pdata->link_clk_reset(motg->clk, assert); + else if (assert) + ret = reset_control_assert(motg->link_rst); + else + ret = reset_control_deassert(motg->link_rst); - ret = motg->pdata->link_clk_reset(motg->clk, assert); if (ret) dev_err(motg->phy.dev, "usb link clk reset %s failed\n", assert ? "assert" : "deassert"); @@ -250,12 +254,13 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) static int msm_otg_phy_clk_reset(struct msm_otg *motg) { - int ret = 0; + int ret; - if (!motg->pdata->phy_clk_reset) - return ret; + if (motg->pdata->phy_clk_reset) + ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk); + else + ret = reset_control_reset(motg->phy_rst); - ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk); if (ret) dev_err(motg->phy.dev, "usb phy clk reset failed\n"); @@ -1377,6 +1382,14 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) id = of_match_device(msm_otg_dt_match, &pdev->dev); pdata->phy_type = (int) id->data; + motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); + if (IS_ERR(motg->link_rst)) + return PTR_ERR(motg->link_rst); + + motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy"); + if (IS_ERR(motg->phy_rst)) + return PTR_ERR(motg->phy_rst); + pdata->mode = of_usb_get_dr_mode(node); if (pdata->mode == USB_DR_MODE_UNKNOWN) pdata->mode = USB_DR_MODE_OTG; diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index bd68299c278e..4e5d9168f52e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -165,6 +165,9 @@ struct msm_otg { struct regulator *v3p3; struct regulator *v1p8; struct regulator *vddcx; + + struct reset_control *phy_rst; + struct reset_control *link_rst; }; #endif From cfa3ff5dfe6a11ac8bc4a080416984ab00b0980c Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:17 +0300 Subject: [PATCH 074/314] usb: phy: msm: Add support for secondary PHY control Allow support to use 2nd HSPHY with USB2 Core. Some platforms may have configuration to allow USB controller work with any of the two HSPHYs present. By default driver configures USB core to use primary HSPHY. Add support to allow user select 2nd HSPHY using DT parameter. Signed-off-by: Ivan T. Ivanov Cc: Manu Gautam Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/msm-hsusb.txt | 6 +++++ drivers/usb/phy/phy-msm-usb.c | 24 +++++++++++++++++-- include/linux/usb/msm_hsusb.h | 1 + include/linux/usb/msm_hsusb_hw.h | 1 + 4 files changed, 30 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index ee4123de3de4..066966706ca1 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -59,6 +59,12 @@ Optional properties: For example: qcom,phy-init-sequence = < -1 0x63 >; Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1. +- qcom,phy-num: Select number of pyco-phy to use, can be one of + 0 - PHY one, default + 1 - Second PHY + Some platforms may have configuration to allow USB + controller work with any of the two HSPHYs present. + Example HSUSB OTG controller device node: usb@f9a55000 { diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index a6abb1b3a7f0..8d57045ac938 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -314,6 +314,9 @@ static int msm_otg_phy_reset(struct msm_otg *motg) if (!retries) return -ETIMEDOUT; + if (motg->phy_number) + writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + dev_info(motg->phy.dev, "phy_reset: success\n"); return 0; } @@ -368,6 +371,9 @@ static int msm_otg_reset(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + if (motg->phy_number) + writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + return 0; } @@ -404,6 +410,7 @@ static int msm_otg_suspend(struct msm_otg *motg) struct usb_phy *phy = &motg->phy; struct usb_bus *bus = phy->otg->host; struct msm_otg_platform_data *pdata = motg->pdata; + void __iomem *addr; int cnt = 0; if (atomic_read(&motg->in_lpm)) @@ -463,9 +470,13 @@ static int msm_otg_suspend(struct msm_otg *motg) */ writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD); + addr = USB_PHY_CTRL; + if (motg->phy_number) + addr = USB_PHY_CTRL2; + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && motg->pdata->otg_control == OTG_PMIC_CONTROL) - writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL); + writel(readl(addr) | PHY_RETEN, addr); clk_disable_unprepare(motg->pclk); clk_disable_unprepare(motg->clk); @@ -495,6 +506,7 @@ static int msm_otg_resume(struct msm_otg *motg) { struct usb_phy *phy = &motg->phy; struct usb_bus *bus = phy->otg->host; + void __iomem *addr; int cnt = 0; unsigned temp; @@ -508,9 +520,14 @@ static int msm_otg_resume(struct msm_otg *motg) if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && motg->pdata->otg_control == OTG_PMIC_CONTROL) { + + addr = USB_PHY_CTRL; + if (motg->phy_number) + addr = USB_PHY_CTRL2; + msm_hsusb_ldo_set_mode(motg, 1); msm_hsusb_config_vddcx(motg, 1); - writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL); + writel(readl(addr) & ~PHY_RETEN, addr); } temp = readl(USB_USBCMD); @@ -1399,6 +1416,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) if (val == OTG_PMIC_CONTROL) pdata->otg_control = val; + if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2) + motg->phy_number = val; + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 4e5d9168f52e..4628f1a4713e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -158,6 +158,7 @@ struct msm_otg { atomic_t in_lpm; int async_int; unsigned cur_power; + int phy_number; struct delayed_work chg_work; enum usb_chg_state chg_state; enum usb_chg_type chg_type; diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index 6e97a2d3d39f..e6d703567155 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -25,6 +25,7 @@ #define USB_OTGSC (MSM_USB_BASE + 0x01A4) #define USB_USBMODE (MSM_USB_BASE + 0x01A8) #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) +#define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) From d69c6f5df376ea40df5886468b155f515fddfbb2 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:18 +0300 Subject: [PATCH 075/314] usb: phy: msm: Correct USB PHY Reset sequence for newer platform On few legacy platforms, USB PHY is having dedicated reset clk. It is used to reset USB PHY after putting USB PHY into low power mode and for calibration of USB PHY. Putting USB PHY into low power mode is causing ulpi read/write timeout as expected. USB PHY reset clk is not available on newer platform. For 28nm PHY, reset USB PHY after resetting USB LINK. Also reset USB PHY using USB_PHY_PON bit with USB_OTG_HS_PHY_CTRL register after programming USB PHY Override registers as suggested with hardware programming guidelines. Signed-off-by: Ivan T. Ivanov Signed-off-by: Tim Bird Cc: Mayank Rana Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 142 +++++++++++++++++++------------ include/linux/usb/msm_hsusb_hw.h | 5 ++ 2 files changed, 94 insertions(+), 53 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8d57045ac938..bb339963f8bb 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -48,6 +48,7 @@ #define DRIVER_NAME "msm_otg" #define ULPI_IO_TIMEOUT_USEC (10 * 1000) +#define LINK_RESET_TIMEOUT_USEC (250 * 1000) #define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ #define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ @@ -267,77 +268,35 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg) return ret; } -static int msm_otg_phy_reset(struct msm_otg *motg) +static int msm_link_reset(struct msm_otg *motg) { u32 val; int ret; - int retries; ret = msm_otg_link_clk_reset(motg, 1); if (ret) return ret; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; + + /* wait for 1ms delay as suggested in HPG. */ + usleep_range(1000, 1200); + ret = msm_otg_link_clk_reset(motg, 0); if (ret) return ret; - val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, - ULPI_CLR(ULPI_FUNC_CTRL)); - if (!ret) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - - /* This reset calibrates the phy, if the above write succeeded */ - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_read(&motg->phy, ULPI_DEBUG); - if (ret != -ETIMEDOUT) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); - dev_info(motg->phy.dev, "phy_reset: success\n"); + val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; + writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + return 0; } -#define LINK_RESET_TIMEOUT_USEC (250 * 1000) static int msm_otg_reset(struct usb_phy *phy) { struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - struct msm_otg_platform_data *pdata = motg->pdata; int cnt = 0; - int ret; - u32 val = 0; - u32 ulpi_val = 0; - - ret = msm_otg_phy_reset(motg); - if (ret) { - dev_err(phy->dev, "phy_reset failed\n"); - return ret; - } - - ulpi_init(motg); writel(USBCMD_RESET, USB_USBCMD); while (cnt < LINK_RESET_TIMEOUT_USEC) { @@ -351,11 +310,86 @@ static int msm_otg_reset(struct usb_phy *phy) /* select ULPI phy */ writel(0x80000000, USB_PORTSC); + writel(0x0, USB_AHBBURST); + writel(0x08, USB_AHBMODE); + + if (motg->phy_number) + writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + return 0; +} + +static void msm_phy_reset(struct msm_otg *motg) +{ + void __iomem *addr; + + if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) { + msm_otg_phy_clk_reset(motg); + return; + } + + addr = USB_PHY_CTRL; + if (motg->phy_number) + addr = USB_PHY_CTRL2; + + /* Assert USB PHY_POR */ + writel(readl(addr) | PHY_POR_ASSERT, addr); + + /* + * wait for minimum 10 microseconds as suggested in HPG. + * Use a slightly larger value since the exact value didn't + * work 100% of the time. + */ + udelay(12); + + /* Deassert USB PHY_POR */ + writel(readl(addr) & ~PHY_POR_ASSERT, addr); +} + +static int msm_usb_reset(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int ret; + + if (!IS_ERR(motg->core_clk)) + clk_prepare_enable(motg->core_clk); + + ret = msm_link_reset(motg); + if (ret) { + dev_err(phy->dev, "phy_reset failed\n"); + return ret; + } + + ret = msm_otg_reset(&motg->phy); + if (ret) { + dev_err(phy->dev, "link reset failed\n"); + return ret; + } msleep(100); - writel(0x0, USB_AHBBURST); - writel(0x00, USB_AHBMODE); + /* Reset USB PHY after performing USB Link RESET */ + msm_phy_reset(motg); + + if (!IS_ERR(motg->core_clk)) + clk_disable_unprepare(motg->core_clk); + + return 0; +} + +static int msm_phy_init(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + u32 val, ulpi_val = 0; + + /* Program USB PHY Override registers. */ + ulpi_init(motg); + + /* + * It is recommended in HPG to reset USB PHY after programming + * USB PHY Override registers. + */ + msm_phy_reset(motg); if (pdata->otg_control == OTG_PHY_CONTROL) { val = readl(USB_OTGSC); @@ -1574,7 +1608,7 @@ static int msm_otg_probe(struct platform_device *pdev) goto disable_ldo; } - phy->init = msm_otg_reset; + phy->init = msm_phy_init; phy->set_power = msm_otg_set_power; phy->io_ops = &msm_otg_io_ops; @@ -1583,6 +1617,8 @@ static int msm_otg_probe(struct platform_device *pdev) phy->otg->set_host = msm_otg_set_host; phy->otg->set_peripheral = msm_otg_set_peripheral; + msm_usb_reset(phy); + ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); if (ret) { dev_err(&pdev->dev, "usb_add_phy failed\n"); diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index e6d703567155..575c74397e52 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -42,9 +42,14 @@ #define ULPI_DATA(n) ((n) & 255) #define ULPI_DATA_READ(n) (((n) >> 8) & 255) +/* synopsys 28nm phy registers */ +#define ULPI_PWR_CLK_MNG_REG 0x88 +#define OTG_COMP_DISABLE BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ +#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */ /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16) From 9f27984b9e098ce0a35b210ec0315c76108494e4 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Mon, 28 Apr 2014 16:34:19 +0300 Subject: [PATCH 076/314] usb: phy: msm: Fix PTS definitions for MSM USB controller Fix the value used for Parallel Transceiver Select (PTS) for the MSM USB controller. This is a standard chipidea PORTSC definition, where a PHY_TYPE of 10b (<<30) is ULPI and 11b (<<30) is SERIAL. Fix the definitions and use them correctly in the driver code. Signed-off-by: Tim Bird Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 8 +++++--- include/linux/usb/msm_hsusb_hw.h | 5 +++-- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index bb339963f8bb..db8d96377620 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -287,8 +287,9 @@ static int msm_link_reset(struct msm_otg *motg) if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + /* put transceiver in serial mode as part of reset */ val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + writel(val | PORTSC_PTS_SERIAL, USB_PORTSC); return 0; } @@ -308,8 +309,9 @@ static int msm_otg_reset(struct usb_phy *phy) if (cnt >= LINK_RESET_TIMEOUT_USEC) return -ETIMEDOUT; - /* select ULPI phy */ - writel(0x80000000, USB_PORTSC); + /* select ULPI phy and clear other status/control bits in PORTSC */ + writel(PORTSC_PTS_ULPI, USB_PORTSC); + writel(0x0, USB_AHBBURST); writel(0x08, USB_AHBMODE); diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index 575c74397e52..98d3dd8976e5 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -31,8 +31,9 @@ #define USB_USBINTR (MSM_USB_BASE + 0x0148) #define PORTSC_PHCD (1 << 23) /* phy suspend mode */ -#define PORTSC_PTS_MASK (3 << 30) -#define PORTSC_PTS_ULPI (3 << 30) +#define PORTSC_PTS_MASK (3 << 30) +#define PORTSC_PTS_ULPI (2 << 30) +#define PORTSC_PTS_SERIAL (3 << 30) #define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170) #define ULPI_RUN (1 << 30) From 30bf8667cef5655ddfaedf043f13d03606844213 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Mon, 28 Apr 2014 16:34:20 +0300 Subject: [PATCH 077/314] usb: phy: msm: Select secondary PHY via TCSR Select the secondary PHY using the TCSR register, if phy-num=1 in the DTS (or phy_number is set in the platform data). The SOC has 2 PHYs which can be used with the OTG port, and this code allows configuring the correct one. Note: This resolves the problem I was seeing where I couldn't get the USB driver working at all on a dragonboard, from cold boot. This patch depends on patch 5/14 from Ivan's msm USB patch set. It does not use DT for the register address, as there's no evidence that this address changes between SoC versions. Signed-off-by: Tim Bird Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 14 ++++++++++++++ include/linux/usb/msm_hsusb_hw.h | 3 +++ 2 files changed, 17 insertions(+) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index db8d96377620..9437bcf8c367 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1489,6 +1489,7 @@ static int msm_otg_probe(struct platform_device *pdev) struct resource *res; struct msm_otg *motg; struct usb_phy *phy; + void __iomem *phy_select; motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL); if (!motg) { @@ -1553,6 +1554,19 @@ static int msm_otg_probe(struct platform_device *pdev) if (IS_ERR(motg->regs)) return PTR_ERR(motg->regs); + /* + * NOTE: The PHYs can be multiplexed between the chipidea controller + * and the dwc3 controller, using a single bit. It is important that + * the dwc3 driver does not set this bit in an incompatible way. + */ + if (motg->phy_number) { + phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4); + if (IS_ERR(phy_select)) + return PTR_ERR(phy_select); + /* Enable second PHY with the OTG port */ + writel_relaxed(0x1, phy_select); + } + dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); motg->irq = platform_get_irq(pdev, 0); diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index 98d3dd8976e5..a29f6030afb1 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -16,6 +16,9 @@ #ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__ #define __LINUX_USB_GADGET_MSM72K_UDC_H__ +/* USB phy selector - in TCSR address range */ +#define USB2_PHY_SEL 0xfd4ab000 + #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ From 349907c262ad5e698c24565658ae489fb69fee53 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:21 +0300 Subject: [PATCH 078/314] usb: phy: msm: Handle disconnect events Put the transceiver in non-driving mode. Otherwise host may not detect soft-disconnection. Signed-off-by: Ivan T. Ivanov Cc: Pavankumar Kondeti Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 9437bcf8c367..366527ecbdd1 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -235,6 +235,23 @@ static void ulpi_init(struct msm_otg *motg) } } +static int msm_phy_notify_disconnect(struct usb_phy *phy, + enum usb_device_speed speed) +{ + int val; + + /* + * Put the transceiver in non-driving mode. Otherwise host + * may not detect soft-disconnection. + */ + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + + return 0; +} + static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) { int ret; @@ -1626,6 +1643,7 @@ static int msm_otg_probe(struct platform_device *pdev) phy->init = msm_phy_init; phy->set_power = msm_otg_set_power; + phy->notify_disconnect = msm_phy_notify_disconnect; phy->io_ops = &msm_otg_io_ops; From 01799b622217ffebdc95e8e0aedbd4cff6a35a50 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:22 +0300 Subject: [PATCH 079/314] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX New platform uses RBCPR hardware feature, with that voting for absolute voltage of VDD CX is not required. Hence vote for corner of VDD CX which uses nominal corner voltage on VDD CX. Signed-off-by: Ivan T. Ivanov Cc: Mayank Rana Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/msm-hsusb.txt | 5 +++ drivers/usb/phy/phy-msm-usb.c | 35 ++++++++++++++----- include/linux/usb/msm_hsusb.h | 1 + 3 files changed, 33 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 066966706ca1..2826f2af503a 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -65,6 +65,10 @@ Optional properties: Some platforms may have configuration to allow USB controller work with any of the two HSPHYs present. +- qcom,vdd-levels: This property must be a list of three integer values + (no, min, max) where each value represents either a voltage + in microvolts or a value corresponding to voltage corner. + Example HSUSB OTG controller device node: usb@f9a55000 { @@ -87,4 +91,5 @@ Example HSUSB OTG controller device node: qcom,otg-control = <1>; qcom,phy-init-sequence = < -1 0x63 >; + qcom,vdd-levels = <1 5 7>; }; diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 366527ecbdd1..8e7956eb8a77 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -62,6 +62,13 @@ #define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ #define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ +#define USB_PHY_SUSP_DIG_VOL 500000 /* uV */ + +enum vdd_levels { + VDD_LEVEL_NONE = 0, + VDD_LEVEL_MIN, + VDD_LEVEL_MAX, +}; static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) { @@ -69,8 +76,8 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) if (init) { ret = regulator_set_voltage(motg->vddcx, - USB_PHY_VDD_DIG_VOL_MIN, - USB_PHY_VDD_DIG_VOL_MAX); + motg->vdd_levels[VDD_LEVEL_MIN], + motg->vdd_levels[VDD_LEVEL_MAX]); if (ret) { dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); return ret; @@ -81,7 +88,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); } else { ret = regulator_set_voltage(motg->vddcx, 0, - USB_PHY_VDD_DIG_VOL_MAX); + motg->vdd_levels[VDD_LEVEL_MAX]); if (ret) dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); ret = regulator_disable(motg->vddcx); @@ -435,17 +442,16 @@ static int msm_phy_init(struct usb_phy *phy) #ifdef CONFIG_PM -#define USB_PHY_SUSP_DIG_VOL 500000 static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high) { - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int max_vol = motg->vdd_levels[VDD_LEVEL_MAX]; int min_vol; int ret; if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; + min_vol = motg->vdd_levels[VDD_LEVEL_MIN]; else - min_vol = USB_PHY_SUSP_DIG_VOL; + min_vol = motg->vdd_levels[VDD_LEVEL_NONE]; ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol); if (ret) { @@ -1441,7 +1447,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) struct device_node *node = pdev->dev.of_node; struct property *prop; int len, ret, words; - u32 val; + u32 val, tmp[3]; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -1472,6 +1478,19 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2) motg->phy_number = val; + motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL; + motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN; + motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX; + + if (of_get_property(node, "qcom,vdd-levels", &len) && + len == sizeof(tmp)) { + of_property_read_u32_array(node, "qcom,vdd-levels", + tmp, len / sizeof(*tmp)); + motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE]; + motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN]; + motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; + } + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 4628f1a4713e..b0a39243295a 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -169,6 +169,7 @@ struct msm_otg { struct reset_control *phy_rst; struct reset_control *link_rst; + int vdd_levels[3]; }; #endif From e695abb3c8b1b758843a1db2a73c98b3d14c173a Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 28 Apr 2014 16:34:23 +0300 Subject: [PATCH 080/314] usb: phy: msm: Use usb_add_phy_dev() to register device There could be more than one USB2.0 PHY's on the platform. This will allow all of them to be registered successfully. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8e7956eb8a77..9dc79180b934 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1663,6 +1663,7 @@ static int msm_otg_probe(struct platform_device *pdev) phy->init = msm_phy_init; phy->set_power = msm_otg_set_power; phy->notify_disconnect = msm_phy_notify_disconnect; + phy->type = USB_PHY_TYPE_USB2; phy->io_ops = &msm_otg_io_ops; @@ -1672,7 +1673,7 @@ static int msm_otg_probe(struct platform_device *pdev) msm_usb_reset(phy); - ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); + ret = usb_add_phy_dev(&motg->phy); if (ret) { dev_err(&pdev->dev, "usb_add_phy failed\n"); goto disable_ldo; From 9f1d8ed227670c592dac606bc5f3bf8dfcfade16 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 5 May 2014 12:54:40 +0300 Subject: [PATCH 081/314] phy: omap-usb2: Use generic clock names "wkupclk" and "refclk" As clocks might be named differently on multiple platforms, use a generic name in the driver and allow device tree node to specify the platform specific clock name. Reviewed-by: Felipe Balbi Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-omap-usb2.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index a2205a841e5e..7007c11fe07d 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -275,18 +275,34 @@ static int omap_usb2_probe(struct platform_device *pdev) if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); + dev_warn(&pdev->dev, "unable to get wkupclk, trying old name\n"); + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } else { + dev_warn(&pdev->dev, + "found usb_phy_cm_clk32k, please fix DTS\n"); + } } clk_prepare(phy->wkupclk); - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) - dev_vdbg(&pdev->dev, "unable to get refclk960m\n"); - else + phy->optclk = devm_clk_get(phy->dev, "refclk"); + if (IS_ERR(phy->optclk)) { + dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n"); + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) { + dev_dbg(&pdev->dev, + "unable to get usb_otg_ss_refclk960m\n"); + } else { + dev_warn(&pdev->dev, + "found usb_otg_ss_refclk960m, please fix DTS\n"); + } + } else { clk_prepare(phy->optclk); + } usb_add_phy_dev(&phy->phy); From 54f4d144eb0ae33b2973d8bf92768af8539bc16f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 5 May 2014 12:54:41 +0300 Subject: [PATCH 082/314] phy: omap-usb2: Add clock names to Documentation binding Add "wkupclk" and "refclk" information to DT binding information. Reviewed-by: Felipe Balbi Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/ti-phy.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 788fb0fa3762..9ce458f32945 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -32,6 +32,11 @@ Required properties: - reg : Address and length of the register set for the device. - #phy-cells: determine the number of cells that should be given in the phandle while referencing this phy. + - clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + - clock-names: should include: + * "wkupclk" - wakeup clock. + * "refclk" - reference clock (optional). Optional properties: - ctrl-module : phandle of the control module used by PHY driver to power on @@ -44,6 +49,8 @@ usb2phy@4a0ad080 { reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb>; #phy-cells = <0>; + clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", "refclk"; }; TI PIPE3 PHY From fe04e4297e6eab014a2cf152319b9f361df07faf Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 15 Mar 2014 10:37:12 +0100 Subject: [PATCH 083/314] PHY: Exynos: fix SATA phy license typo If the license string doesn't match exactly, the module refuses to load. Signed-off-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-exynos5250-sata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c index c9361b731fa6..05689450f93b 100644 --- a/drivers/phy/phy-exynos5250-sata.c +++ b/drivers/phy/phy-exynos5250-sata.c @@ -246,6 +246,6 @@ static struct platform_driver exynos_sata_phy_driver = { module_platform_driver(exynos_sata_phy_driver); MODULE_DESCRIPTION("Samsung SerDes PHY driver"); -MODULE_LICENSE("GPL V2"); +MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Girish K S "); MODULE_AUTHOR("Yuvaraj C D "); From 98c3b32229f2685c13436b652b8959c99dfc5a31 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antoine=20T=C3=A9nart?= Date: Mon, 12 May 2014 14:56:28 +0200 Subject: [PATCH 084/314] phy: exynos-mipi-video: fix check on array index MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The phys array is of size EXYNOS_MIPI_PHYS_NUM. Trying to access the index EXYNOS_MIPI_PHYS_NUM should return an error. Fixes: 069d2e26e9d6 "phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs" Signed-off-by: Antoine Ténart Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-exynos-mipi-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c index 7f139326a642..ff026689358c 100644 --- a/drivers/phy/phy-exynos-mipi-video.c +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -101,7 +101,7 @@ static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, { struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); - if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM)) + if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM)) return ERR_PTR(-ENODEV); return state->phys[args->args[0]].phy; From 3fc03f3d729d0ea2e69074cd5c16513ab59bd849 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 16:46:53 +0200 Subject: [PATCH 085/314] phy: kona2: use 'select GENERIC_PHY' in Kconfig All other phy drivers use 'select', while this one is the only one to use 'depends on'. This is not a bug, just slightly inconsistent, so let's change it to do things the same way as everyone else. We may also want to turn GENERIC_PHY into a silent option that only ever gets turned on if another driver needs it. Signed-off-by: Arnd Bergmann Cc: Kishon Vijay Abraham I Cc: Matt Porter Cc: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 4906c27fa3bd..071b7633bf03 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -89,8 +89,8 @@ config PHY_EXYNOS_DP_VIDEO config BCM_KONA_USB2_PHY tristate "Broadcom Kona USB2 PHY Driver" - depends on GENERIC_PHY depends on HAS_IOMEM + select GENERIC_PHY help Enable this to support the Broadcom Kona USB 2.0 PHY. From b3025e6ada454848b6ae2d3bcd925738384517df Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 30 Apr 2014 11:33:04 -0500 Subject: [PATCH 086/314] usb: phy: msm: cast to enum msm_usb_phy_type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit this solves the following build warning found when running compile tests. drivers/usb/phy/phy-msm-usb.c: In function ‘msm_otg_read_dt’: drivers/usb/phy/phy-msm-usb.c:1459:20: warning: cast from pointer \ to integer of different size [-Wpointer-to-int-cast] pdata->phy_type = (int) id->data; ^ Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 9dc79180b934..591b406fd7f7 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1456,7 +1456,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->pdata = pdata; id = of_match_device(msm_otg_dt_match, &pdev->dev); - pdata->phy_type = (int) id->data; + pdata->phy_type = (enum msm_usb_phy_type) id->data; motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); if (IS_ERR(motg->link_rst)) From 245974908c2ee8cd907856e6964f59fd8807e1e1 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 30 Apr 2014 11:35:22 -0500 Subject: [PATCH 087/314] usb: phy: msm: switch over to writel() Remove that single instance of writel_relaxed() call which is only available on ARM architecture. This will let us build test this driver on all different architectures. Reviewed-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 591b406fd7f7..c522c4ff8084 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1600,7 +1600,7 @@ static int msm_otg_probe(struct platform_device *pdev) if (IS_ERR(phy_select)) return PTR_ERR(phy_select); /* Enable second PHY with the OTG port */ - writel_relaxed(0x1, phy_select); + writel(0x1, phy_select); } dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); From 1f7fc40876934d52278bb1ee0544191a4b4657f1 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 30 Apr 2014 11:36:03 -0500 Subject: [PATCH 088/314] usb: phy: msm: enable build on other architectures By adding COMPILE_TEST to the list of dependencies we can build test this driver on all other architectures which is very valuable for maintainers applying patches and to find silly mistakes during development. Reviewed-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- drivers/usb/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 0c668a3f5c37..fbbced80b68d 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -172,7 +172,7 @@ config USB_ISP1301 config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" - depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM) + depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST) select USB_PHY help Enable this to support the USB OTG transceiver on Qualcomm chips. It From 6027f3173e797bf27fc5053aa74c9f40f85538d8 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 29 Apr 2014 13:26:28 +0800 Subject: [PATCH 089/314] usb: gadget: set gadget state as configured Set gadget device state as configurated after set configuration has finished. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 1 + drivers/usb/gadget/inode.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index fab906429b80..8060de6562cd 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -634,6 +634,7 @@ static int set_config(struct usb_composite_dev *cdev, if (!c) goto done; + usb_gadget_set_state(gadget, USB_STATE_CONFIGURED); cdev->config = c; /* Initialize all interfaces by setting them to altsetting zero. */ diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index b5be6f0308c2..09e21517377c 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1494,6 +1494,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ if (value == 0) { INFO (dev, "configuration #%d\n", dev->current_config); + usb_gadget_set_state(gadget, USB_STATE_CONFIGURED); if (dev->usermode_setup) { dev->setup_can_stall = 0; goto delegate; From b5fb8d0a40eb52039e8df6fadafa95ecdcdc3026 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 29 Apr 2014 13:26:29 +0800 Subject: [PATCH 090/314] usb: udc-core: set gadget state as not attached after unloading module Set gadget state as "not attached" after unloading gadget module, or its state will be unchanged after we unload gadget module. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 27768a7d986a..b0d98172bc07 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -428,6 +428,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) list_for_each_entry(udc, &udc_list, list) if (udc->driver == driver) { usb_gadget_remove_driver(udc); + usb_gadget_set_state(udc->gadget, + USB_STATE_NOTATTACHED); ret = 0; break; } From 60b6dbeffb8c253d1f80527b28611e5e236dec51 Mon Sep 17 00:00:00 2001 From: Apelete Seketeli Date: Mon, 14 Apr 2014 22:12:56 +0200 Subject: [PATCH 091/314] documentation: docbook: document process of writing an musb glue layer Document the process of writing an musb glue layer by taking the Ingenic JZ4740 glue layer as an example, as it seems more simple than most glue layers due to the basic feature set of the JZ4740 USB device controller. Signed-off-by: Apelete Seketeli Signed-off-by: Felipe Balbi --- Documentation/DocBook/Makefile | 3 +- .../DocBook/writing_musb_glue_layer.tmpl | 873 ++++++++++++++++++ 2 files changed, 875 insertions(+), 1 deletion(-) create mode 100644 Documentation/DocBook/writing_musb_glue_layer.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index b444f2e8fe32..bec06659e0eb 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -14,7 +14,8 @@ DOCBOOKS := z8530book.xml device-drivers.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ 80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ - tracepoint.xml drm.xml media_api.xml w1.xml + tracepoint.xml drm.xml media_api.xml w1.xml \ + writing_musb_glue_layer.xml include Documentation/DocBook/media/Makefile diff --git a/Documentation/DocBook/writing_musb_glue_layer.tmpl b/Documentation/DocBook/writing_musb_glue_layer.tmpl new file mode 100644 index 000000000000..837eca77f274 --- /dev/null +++ b/Documentation/DocBook/writing_musb_glue_layer.tmpl @@ -0,0 +1,873 @@ + + + + + + Writing an MUSB Glue Layer + + + + Apelete + Seketeli + +
+ apelete at seketeli.net +
+ + + + + + 2014 + Apelete Seketeli + + + + + This documentation is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + + + This documentation is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public License + along with this documentation; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA + + + + For more details see the file COPYING in the Linux kernel source + tree. + + + + + + + + Introduction + + The Linux MUSB subsystem is part of the larger Linux USB + subsystem. It provides support for embedded USB Device Controllers + (UDC) that do not use Universal Host Controller Interface (UHCI) + or Open Host Controller Interface (OHCI). + + + Instead, these embedded UDC rely on the USB On-the-Go (OTG) + specification which they implement at least partially. The silicon + reference design used in most cases is the Multipoint USB + Highspeed Dual-Role Controller (MUSB HDRC) found in the Mentor + Graphics Inventra™ design. + + + As a self-taught exercise I have written an MUSB glue layer for + the Ingenic JZ4740 SoC, modelled after the many MUSB glue layers + in the kernel source tree. This layer can be found at + drivers/usb/musb/jz4740.c. In this documentation I will walk + through the basics of the jz4740.c glue layer, explaining the + different pieces and what needs to be done in order to write your + own device glue layer. + + + + + Linux MUSB Basics + + To get started on the topic, please read USB On-the-Go Basics (see + Resources) which provides an introduction of USB OTG operation at + the hardware level. A couple of wiki pages by Texas Instruments + and Analog Devices also provide an overview of the Linux kernel + MUSB configuration, albeit focused on some specific devices + provided by these companies. Finally, getting acquainted with the + USB specification at USB home page may come in handy, with + practical instance provided through the Writing USB Device Drivers + documentation (again, see Resources). + + + Linux USB stack is a layered architecture in which the MUSB + controller hardware sits at the lowest. The MUSB controller driver + abstract the MUSB controller hardware to the Linux USB stack. + + + ------------------------ + | | <------- drivers/usb/gadget + | Linux USB Core Stack | <------- drivers/usb/host + | | <------- drivers/usb/core + ------------------------ + ⬍ + -------------------------- + | | <------ drivers/usb/musb/musb_gadget.c + | MUSB Controller driver | <------ drivers/usb/musb/musb_host.c + | | <------ drivers/usb/musb/musb_core.c + -------------------------- + ⬍ + --------------------------------- + | MUSB Platform Specific Driver | + | | <-- drivers/usb/musb/jz4740.c + | aka "Glue Layer" | + --------------------------------- + ⬍ + --------------------------------- + | MUSB Controller Hardware | + --------------------------------- + + + As outlined above, the glue layer is actually the platform + specific code sitting in between the controller driver and the + controller hardware. + + + Just like a Linux USB driver needs to register itself with the + Linux USB subsystem, the MUSB glue layer needs first to register + itself with the MUSB controller driver. This will allow the + controller driver to know about which device the glue layer + supports and which functions to call when a supported device is + detected or released; remember we are talking about an embedded + controller chip here, so no insertion or removal at run-time. + + + All of this information is passed to the MUSB controller driver + through a platform_driver structure defined in the glue layer as: + + +static struct platform_driver jz4740_driver = { + .probe = jz4740_probe, + .remove = jz4740_remove, + .driver = { + .name = "musb-jz4740", + }, +}; + + + The probe and remove function pointers are called when a matching + device is detected and, respectively, released. The name string + describes the device supported by this glue layer. In the current + case it matches a platform_device structure declared in + arch/mips/jz4740/platform.c. Note that we are not using device + tree bindings here. + + + In order to register itself to the controller driver, the glue + layer goes through a few steps, basically allocating the + controller hardware resources and initialising a couple of + circuits. To do so, it needs to keep track of the information used + throughout these steps. This is done by defining a private + jz4740_glue structure: + + +struct jz4740_glue { + struct device *dev; + struct platform_device *musb; + struct clk *clk; +}; + + + The dev and musb members are both device structure variables. The + first one holds generic information about the device, since it's + the basic device structure, and the latter holds information more + closely related to the subsystem the device is registered to. The + clk variable keeps information related to the device clock + operation. + + + Let's go through the steps of the probe function that leads the + glue layer to register itself to the controller driver. + + + N.B.: For the sake of readability each function will be split in + logical parts, each part being shown as if it was independent from + the others. + + +static int jz4740_probe(struct platform_device *pdev) +{ + struct platform_device *musb; + struct jz4740_glue *glue; + struct clk *clk; + int ret; + + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); + if (!musb) { + dev_err(&pdev->dev, "failed to allocate musb device\n"); + return -ENOMEM; + } + + clk = devm_clk_get(&pdev->dev, "udc"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + ret = PTR_ERR(clk); + goto err_platform_device_put; + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto err_platform_device_put; + } + + musb->dev.parent = &pdev->dev; + + glue->dev = &pdev->dev; + glue->musb = musb; + glue->clk = clk; + + return 0; + +err_platform_device_put: + platform_device_put(musb); + return ret; +} + + + The first few lines of the probe function allocate and assign the + glue, musb and clk variables. The GFP_KERNEL flag (line 8) allows + the allocation process to sleep and wait for memory, thus being + usable in a blocking situation. The PLATFORM_DEVID_AUTO flag (line + 12) allows automatic allocation and management of device IDs in + order to avoid device namespace collisions with explicit IDs. With + devm_clk_get() (line 18) the glue layer allocates the clock -- the + devm_ prefix indicates that clk_get() is + managed: it automatically frees the allocated clock resource data + when the device is released -- and enable it. + + + Then comes the registration steps: + + +static int jz4740_probe(struct platform_device *pdev) +{ + struct musb_hdrc_platform_data *pdata = &jz4740_musb_platform_data; + + pdata->platform_ops = &jz4740_musb_ops; + + platform_set_drvdata(pdev, glue); + + ret = platform_device_add_resources(musb, pdev->resource, + pdev->num_resources); + if (ret) { + dev_err(&pdev->dev, "failed to add resources\n"); + goto err_clk_disable; + } + + ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); + if (ret) { + dev_err(&pdev->dev, "failed to add platform_data\n"); + goto err_clk_disable; + } + + return 0; + +err_clk_disable: + clk_disable_unprepare(clk); +err_platform_device_put: + platform_device_put(musb); + return ret; +} + + + The first step is to pass the device data privately held by the + glue layer on to the controller driver through + platform_set_drvdata() (line 7). Next is passing on the device + resources information, also privately held at that point, through + platform_device_add_resources() (line 9). + + + Finally comes passing on the platform specific data to the + controller driver (line 16). Platform data will be discussed in + Chapter 4, but here + we are looking at the platform_ops function pointer (line 5) in + musb_hdrc_platform_data structure (line 3). This function + pointer allows the MUSB controller driver to know which function + to call for device operation: + + +static const struct musb_platform_ops jz4740_musb_ops = { + .init = jz4740_musb_init, + .exit = jz4740_musb_exit, +}; + + + Here we have the minimal case where only init and exit functions + are called by the controller driver when needed. Fact is the + JZ4740 MUSB controller is a basic controller, lacking some + features found in other controllers, otherwise we may also have + pointers to a few other functions like a power management function + or a function to switch between OTG and non-OTG modes, for + instance. + + + At that point of the registration process, the controller driver + actually calls the init function: + + +static int jz4740_musb_init(struct musb *musb) +{ + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (!musb->xceiv) { + pr_err("HS UDC: no transceiver configured\n"); + return -ENODEV; + } + + /* Silicon does not implement ConfigData register. + * Set dyn_fifo to avoid reading EP config from hardware. + */ + musb->dyn_fifo = true; + + musb->isr = jz4740_musb_interrupt; + + return 0; +} + + + The goal of jz4740_musb_init() is to get hold of the transceiver + driver data of the MUSB controller hardware and pass it on to the + MUSB controller driver, as usual. The transceiver is the circuitry + inside the controller hardware responsible for sending/receiving + the USB data. Since it is an implementation of the physical layer + of the OSI model, the transceiver is also referred to as PHY. + + + Getting hold of the MUSB PHY driver data is done with + usb_get_phy() which returns a pointer to the structure + containing the driver instance data. The next couple of + instructions (line 12 and 14) are used as a quirk and to setup + IRQ handling respectively. Quirks and IRQ handling will be + discussed later in Chapter + 5 and Chapter 3. + + +static int jz4740_musb_exit(struct musb *musb) +{ + usb_put_phy(musb->xceiv); + + return 0; +} + + + Acting as the counterpart of init, the exit function releases the + MUSB PHY driver when the controller hardware itself is about to be + released. + + + Again, note that init and exit are fairly simple in this case due + to the basic set of features of the JZ4740 controller hardware. + When writing an musb glue layer for a more complex controller + hardware, you might need to take care of more processing in those + two functions. + + + Returning from the init function, the MUSB controller driver jumps + back into the probe function: + + +static int jz4740_probe(struct platform_device *pdev) +{ + ret = platform_device_add(musb); + if (ret) { + dev_err(&pdev->dev, "failed to register musb device\n"); + goto err_clk_disable; + } + + return 0; + +err_clk_disable: + clk_disable_unprepare(clk); +err_platform_device_put: + platform_device_put(musb); + return ret; +} + + + This is the last part of the device registration process where the + glue layer adds the controller hardware device to Linux kernel + device hierarchy: at this stage, all known information about the + device is passed on to the Linux USB core stack. + + +static int jz4740_remove(struct platform_device *pdev) +{ + struct jz4740_glue *glue = platform_get_drvdata(pdev); + + platform_device_unregister(glue->musb); + clk_disable_unprepare(glue->clk); + + return 0; +} + + + Acting as the counterpart of probe, the remove function unregister + the MUSB controller hardware (line 5) and disable the clock (line + 6), allowing it to be gated. + + + + + Handling IRQs + + Additionally to the MUSB controller hardware basic setup and + registration, the glue layer is also responsible for handling the + IRQs: + + +static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + /* + * The controller is gadget only, the state of the host mode IRQ bits is + * undefined. Mask them to make sure that the musb driver core will + * never see them set + */ + musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME | + MUSB_INTR_RESET | MUSB_INTR_SOF; + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return retval; +} + + + Here the glue layer mostly has to read the relevant hardware + registers and pass their values on to the controller driver which + will handle the actual event that triggered the IRQ. + + + The interrupt handler critical section is protected by the + spin_lock_irqsave() and counterpart spin_unlock_irqrestore() + functions (line 7 and 24 respectively), which prevent the + interrupt handler code to be run by two different threads at the + same time. + + + Then the relevant interrupt registers are read (line 9 to 11): + + + + + MUSB_INTRUSB: indicates which USB interrupts are currently + active, + + + + + MUSB_INTRTX: indicates which of the interrupts for TX + endpoints are currently active, + + + + + MUSB_INTRRX: indicates which of the interrupts for TX + endpoints are currently active. + + + + + Note that musb_readb() is used to read 8-bit registers at most, + while musb_readw() allows us to read at most 16-bit registers. + There are other functions that can be used depending on the size + of your device registers. See musb_io.h for more information. + + + Instruction on line 18 is another quirk specific to the JZ4740 + USB device controller, which will be discussed later in Chapter 5. + + + The glue layer still needs to register the IRQ handler though. + Remember the instruction on line 14 of the init function: + + +static int jz4740_musb_init(struct musb *musb) +{ + musb->isr = jz4740_musb_interrupt; + + return 0; +} + + + This instruction sets a pointer to the glue layer IRQ handler + function, in order for the controller hardware to call the handler + back when an IRQ comes from the controller hardware. The interrupt + handler is now implemented and registered. + + + + + Device Platform Data + + In order to write an MUSB glue layer, you need to have some data + describing the hardware capabilities of your controller hardware, + which is called the platform data. + + + Platform data is specific to your hardware, though it may cover a + broad range of devices, and is generally found somewhere in the + arch/ directory, depending on your device architecture. + + + For instance, platform data for the JZ4740 SoC is found in + arch/mips/jz4740/platform.c. In the platform.c file each device of + the JZ4740 SoC is described through a set of structures. + + + Here is the part of arch/mips/jz4740/platform.c that covers the + USB Device Controller (UDC): + + +/* USB Device Controller */ +struct platform_device jz4740_udc_xceiv_device = { + .name = "usb_phy_gen_xceiv", + .id = 0, +}; + +static struct resource jz4740_udc_resources[] = { + [0] = { + .start = JZ4740_UDC_BASE_ADDR, + .end = JZ4740_UDC_BASE_ADDR + 0x10000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = JZ4740_IRQ_UDC, + .end = JZ4740_IRQ_UDC, + .flags = IORESOURCE_IRQ, + .name = "mc", + }, +}; + +struct platform_device jz4740_udc_device = { + .name = "musb-jz4740", + .id = -1, + .dev = { + .dma_mask = &jz4740_udc_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(jz4740_udc_resources), + .resource = jz4740_udc_resources, +}; + + + The jz4740_udc_xceiv_device platform device structure (line 2) + describes the UDC transceiver with a name and id number. + + + At the time of this writing, note that + "usb_phy_gen_xceiv" is the specific name to be used for + all transceivers that are either built-in with reference USB IP or + autonomous and doesn't require any PHY programming. You will need + to set CONFIG_NOP_USB_XCEIV=y in the kernel configuration to make + use of the corresponding transceiver driver. The id field could be + set to -1 (equivalent to PLATFORM_DEVID_NONE), -2 (equivalent to + PLATFORM_DEVID_AUTO) or start with 0 for the first device of this + kind if we want a specific id number. + + + The jz4740_udc_resources resource structure (line 7) defines the + UDC registers base addresses. + + + The first array (line 9 to 11) defines the UDC registers base + memory addresses: start points to the first register memory + address, end points to the last register memory address and the + flags member defines the type of resource we are dealing with. So + IORESOURCE_MEM is used to define the registers memory addresses. + The second array (line 14 to 17) defines the UDC IRQ registers + addresses. Since there is only one IRQ register available for the + JZ4740 UDC, start and end point at the same address. The + IORESOURCE_IRQ flag tells that we are dealing with IRQ resources, + and the name "mc" is in fact hard-coded in the MUSB core + in order for the controller driver to retrieve this IRQ resource + by querying it by its name. + + + Finally, the jz4740_udc_device platform device structure (line 21) + describes the UDC itself. + + + The "musb-jz4740" name (line 22) defines the MUSB + driver that is used for this device; remember this is in fact + the name that we used in the jz4740_driver platform driver + structure in Chapter + 2. The id field (line 23) is set to -1 (equivalent to + PLATFORM_DEVID_NONE) since we do not need an id for the device: + the MUSB controller driver was already set to allocate an + automatic id in Chapter + 2. In the dev field we care for DMA related information + here. The dma_mask field (line 25) defines the width of the DMA + mask that is going to be used, and coherent_dma_mask (line 26) + has the same purpose but for the alloc_coherent DMA mappings: in + both cases we are using a 32 bits mask. Then the resource field + (line 29) is simply a pointer to the resource structure defined + before, while the num_resources field (line 28) keeps track of + the number of arrays defined in the resource structure (in this + case there were two resource arrays defined before). + + + With this quick overview of the UDC platform data at the arch/ + level now done, let's get back to the MUSB glue layer specific + platform data in drivers/usb/musb/jz4740.c: + + +static struct musb_hdrc_config jz4740_musb_config = { + /* Silicon does not implement USB OTG. */ + .multipoint = 0, + /* Max EPs scanned, driver will decide which EP can be used. */ + .num_eps = 4, + /* RAMbits needed to configure EPs from table */ + .ram_bits = 9, + .fifo_cfg = jz4740_musb_fifo_cfg, + .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg), +}; + +static struct musb_hdrc_platform_data jz4740_musb_platform_data = { + .mode = MUSB_PERIPHERAL, + .config = &jz4740_musb_config, +}; + + + First the glue layer configures some aspects of the controller + driver operation related to the controller hardware specifics. + This is done through the jz4740_musb_config musb_hdrc_config + structure. + + + Defining the OTG capability of the controller hardware, the + multipoint member (line 3) is set to 0 (equivalent to false) + since the JZ4740 UDC is not OTG compatible. Then num_eps (line + 5) defines the number of USB endpoints of the controller + hardware, including endpoint 0: here we have 3 endpoints + + endpoint 0. Next is ram_bits (line 7) which is the width of the + RAM address bus for the MUSB controller hardware. This + information is needed when the controller driver cannot + automatically configure endpoints by reading the relevant + controller hardware registers. This issue will be discussed when + we get to device quirks in Chapter + 5. Last two fields (line 8 and 9) are also about device + quirks: fifo_cfg points to the USB endpoints configuration table + and fifo_cfg_size keeps track of the size of the number of + entries in that configuration table. More on that later in Chapter 5. + + + Then this configuration is embedded inside + jz4740_musb_platform_data musb_hdrc_platform_data structure (line + 11): config is a pointer to the configuration structure itself, + and mode tells the controller driver if the controller hardware + may be used as MUSB_HOST only, MUSB_PERIPHERAL only or MUSB_OTG + which is a dual mode. + + + Remember that jz4740_musb_platform_data is then used to convey + platform data information as we have seen in the probe function + in Chapter 2 + + + + + Device Quirks + + Completing the platform data specific to your device, you may also + need to write some code in the glue layer to work around some + device specific limitations. These quirks may be due to some + hardware bugs, or simply be the result of an incomplete + implementation of the USB On-the-Go specification. + + + The JZ4740 UDC exhibits such quirks, some of which we will discuss + here for the sake of insight even though these might not be found + in the controller hardware you are working on. + + + Let's get back to the init function first: + + +static int jz4740_musb_init(struct musb *musb) +{ + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (!musb->xceiv) { + pr_err("HS UDC: no transceiver configured\n"); + return -ENODEV; + } + + /* Silicon does not implement ConfigData register. + * Set dyn_fifo to avoid reading EP config from hardware. + */ + musb->dyn_fifo = true; + + musb->isr = jz4740_musb_interrupt; + + return 0; +} + + + Instruction on line 12 helps the MUSB controller driver to work + around the fact that the controller hardware is missing registers + that are used for USB endpoints configuration. + + + Without these registers, the controller driver is unable to read + the endpoints configuration from the hardware, so we use line 12 + instruction to bypass reading the configuration from silicon, and + rely on a hard-coded table that describes the endpoints + configuration instead: + + +static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, }, +}; + + + Looking at the configuration table above, we see that each + endpoints is described by three fields: hw_ep_num is the endpoint + number, style is its direction (either FIFO_TX for the controller + driver to send packets in the controller hardware, or FIFO_RX to + receive packets from hardware), and maxpacket defines the maximum + size of each data packet that can be transmitted over that + endpoint. Reading from the table, the controller driver knows that + endpoint 1 can be used to send and receive USB data packets of 512 + bytes at once (this is in fact a bulk in/out endpoint), and + endpoint 2 can be used to send data packets of 64 bytes at once + (this is in fact an interrupt endpoint). + + + Note that there is no information about endpoint 0 here: that one + is implemented by default in every silicon design, with a + predefined configuration according to the USB specification. For + more examples of endpoint configuration tables, see musb_core.c. + + + Let's now get back to the interrupt handler function: + + +static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + /* + * The controller is gadget only, the state of the host mode IRQ bits is + * undefined. Mask them to make sure that the musb driver core will + * never see them set + */ + musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME | + MUSB_INTR_RESET | MUSB_INTR_SOF; + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return retval; +} + + + Instruction on line 18 above is a way for the controller driver to + work around the fact that some interrupt bits used for USB host + mode operation are missing in the MUSB_INTRUSB register, thus left + in an undefined hardware state, since this MUSB controller + hardware is used in peripheral mode only. As a consequence, the + glue layer masks these missing bits out to avoid parasite + interrupts by doing a logical AND operation between the value read + from MUSB_INTRUSB and the bits that are actually implemented in + the register. + + + These are only a couple of the quirks found in the JZ4740 USB + device controller. Some others were directly addressed in the MUSB + core since the fixes were generic enough to provide a better + handling of the issues for others controller hardware eventually. + + + + + Conclusion + + Writing a Linux MUSB glue layer should be a more accessible task, + as this documentation tries to show the ins and outs of this + exercise. + + + The JZ4740 USB device controller being fairly simple, I hope its + glue layer serves as a good example for the curious mind. Used + with the current MUSB glue layers, this documentation should + provide enough guidance to get started; should anything gets out + of hand, the linux-usb mailing list archive is another helpful + resource to browse through. + + + + + Acknowledgements + + Many thanks to Lars-Peter Clausen and Maarten ter Huurne for + answering my questions while I was writing the JZ4740 glue layer + and for helping me out getting the code in good shape. + + + I would also like to thank the Qi-Hardware community at large for + its cheerful guidance and support. + + + + + Resources + + USB Home Page: + http://www.usb.org + + + linux-usb Mailing List Archives: + http://marc.info/?l=linux-usb + + + USB On-the-Go Basics: + http://www.maximintegrated.com/app-notes/index.mvp/id/1822 + + + Writing USB Device Drivers: + https://www.kernel.org/doc/htmldocs/writing_usb_driver/index.html + + + Texas Instruments USB Configuration Wiki Page: + http://processors.wiki.ti.com/index.php/Usbgeneralpage + + + Analog Devices Blackfin MUSB Configuration: + http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:musb + + + + From 9e552a04fd51ef241f8b3a15396487be9effbc2a Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 13 May 2014 15:30:15 +0530 Subject: [PATCH 092/314] Documentation: Document Exynos5 USB 3.0 DRD PHY Add necessary binding documentation for USB 3.0 DRD PHY present on Exynos5 SoC series. Signed-off-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/samsung-phy.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index b422e38946d7..2049261d8c31 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -114,3 +114,50 @@ Example: compatible = "samsung,exynos-sataphy-i2c"; reg = <0x38>; }; + +Samsung Exynos5 SoC series USB DRD PHY controller +-------------------------------------------------- + +Required properties: +- compatible : Should be set to one of the following supported values: + - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC, + - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC. +- reg : Register offset and length of USB DRD PHY register set; +- clocks: Clock IDs array as required by the controller +- clock-names: names of clocks correseponding to IDs in the clock property; + Required clocks: + - phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), + used for register access. + - ref: PHY's reference clock (usually crystal clock), used for + PHY operations, associated by phy name. It is used to + determine bit values for clock settings register. + For Exynos5420 this is given as 'sclk_usbphy30' in CMU. +- samsung,pmu-syscon: phandle for PMU system controller interface, used to + control pmu registers for power isolation. +- #phy-cells : from the generic PHY bindings, must be 1; + +For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy" +compatible PHYs, the second cell in the PHY specifier identifies the +PHY id, which is interpreted as follows: + 0 - UTMI+ type phy, + 1 - PIPE3 type phy, + +Example: + usbdrd_phy: usbphy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock 286>, <&clock 1>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + +- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers, + 'usbdrd_phy' nodes should have numbered alias in the aliases node, + in the form of usbdrdphyN, N = 0, 1... (depending on number of + controllers). +Example: + aliases { + usbdrdphy0 = &usb3_phy0; + usbdrdphy1 = &usb3_phy1; + }; From 59025887fb08a8b913605fb20f8a62eb0bb69b36 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 13 May 2014 15:30:16 +0530 Subject: [PATCH 093/314] phy: Add new Exynos5 USB 3.0 PHY driver Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. The new driver uses the generic PHY framework and will interact with DWC3 controller present on Exynos5 series of SoCs. Also, created a new header file in linux/mfd/syscon/ for Exynos5 SoCs and put the required PMU offset definitions for the basic available PHYs. Signed-off-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/Kconfig | 11 + drivers/phy/Makefile | 1 + drivers/phy/phy-exynos5-usbdrd.c | 644 +++++++++++++++++++++++++ include/linux/mfd/syscon/exynos5-pmu.h | 44 ++ 4 files changed, 700 insertions(+) create mode 100644 drivers/phy/phy-exynos5-usbdrd.c create mode 100644 include/linux/mfd/syscon/exynos5-pmu.h diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 071b7633bf03..16a2f067c242 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -160,6 +160,17 @@ config PHY_EXYNOS5250_USB2 particular SoC is compiled in the driver. In case of Exynos 5250 four phys are available - device, host, HSIC0 and HSIC. +config PHY_EXYNOS5_USBDRD + tristate "Exynos5 SoC series USB DRD PHY driver" + depends on ARCH_EXYNOS5 && OF + depends on HAS_IOMEM + select GENERIC_PHY + select MFD_SYSCON + help + Enable USB DRD PHY support for Exynos 5 SoC series. + This driver provides PHY interface for USB 3.0 DRD controller + present on Exynos5 SoC series. + config PHY_XGENE tristate "APM X-Gene 15Gbps PHY support" depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 7728518572a4..b4f1d5770601 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -18,4 +18,5 @@ phy-exynos-usb2-y += phy-samsung-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c new file mode 100644 index 000000000000..8fcdd9434346 --- /dev/null +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -0,0 +1,644 @@ +/* + * Samsung EXYNOS5 SoC series USB DRD PHY driver + * + * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series + * + * Copyright (C) 2014 Samsung Electronics Co., Ltd. + * Author: Vivek Gautam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Exynos USB PHY registers */ +#define EXYNOS5_FSEL_9MHZ6 0x0 +#define EXYNOS5_FSEL_10MHZ 0x1 +#define EXYNOS5_FSEL_12MHZ 0x2 +#define EXYNOS5_FSEL_19MHZ2 0x3 +#define EXYNOS5_FSEL_20MHZ 0x4 +#define EXYNOS5_FSEL_24MHZ 0x5 +#define EXYNOS5_FSEL_50MHZ 0x7 + +/* EXYNOS5: USB 3.0 DRD PHY registers */ +#define EXYNOS5_DRD_LINKSYSTEM 0x04 + +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) + +#define EXYNOS5_DRD_PHYUTMI 0x08 + +#define PHYUTMI_OTGDISABLE BIT(6) +#define PHYUTMI_FORCESUSPEND BIT(1) +#define PHYUTMI_FORCESLEEP BIT(0) + +#define EXYNOS5_DRD_PHYPIPE 0x0c + +#define EXYNOS5_DRD_PHYCLKRST 0x10 + +#define PHYCLKRST_EN_UTMISUSPEND BIT(31) + +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) + +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) + +#define PHYCLKRST_SSC_EN BIT(20) +#define PHYCLKRST_REF_SSP_EN BIT(19) +#define PHYCLKRST_REF_CLKDIV2 BIT(18) + +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) + +#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) +#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) +#define PHYCLKRST_FSEL(_x) ((_x) << 5) +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) + +#define PHYCLKRST_RETENABLEN BIT(4) + +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) + +#define PHYCLKRST_PORTRESET BIT(1) +#define PHYCLKRST_COMMONONN BIT(0) + +#define EXYNOS5_DRD_PHYREG0 0x14 +#define EXYNOS5_DRD_PHYREG1 0x18 + +#define EXYNOS5_DRD_PHYPARAM0 0x1c + +#define PHYPARAM0_REF_USE_PAD BIT(31) +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) + +#define EXYNOS5_DRD_PHYPARAM1 0x20 + +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH (0x1c) + +#define EXYNOS5_DRD_PHYTERM 0x24 + +#define EXYNOS5_DRD_PHYTEST 0x28 + +#define PHYTEST_POWERDOWN_SSP BIT(3) +#define PHYTEST_POWERDOWN_HSP BIT(2) + +#define EXYNOS5_DRD_PHYADP 0x2c + +#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30 + +#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2) + +#define EXYNOS5_DRD_PHYRESUME 0x34 +#define EXYNOS5_DRD_LINKPORT 0x44 + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +enum exynos5_usbdrd_phy_id { + EXYNOS5_DRDPHY_UTMI, + EXYNOS5_DRDPHY_PIPE3, + EXYNOS5_DRDPHYS_NUM, +}; + +struct phy_usb_instance; +struct exynos5_usbdrd_phy; + +struct exynos5_usbdrd_phy_config { + u32 id; + void (*phy_isol)(struct phy_usb_instance *inst, u32 on); + void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd); + unsigned int (*set_refclk)(struct phy_usb_instance *inst); +}; + +struct exynos5_usbdrd_phy_drvdata { + const struct exynos5_usbdrd_phy_config *phy_cfg; + u32 pmu_offset_usbdrd0_phy; + u32 pmu_offset_usbdrd1_phy; +}; + +/** + * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY + * @dev: pointer to device instance of this platform device + * @reg_phy: usb phy controller register memory base + * @clk: phy clock for register access + * @drv_data: pointer to SoC level driver data structure + * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY + * instances each with its 'phy' and 'phy_cfg'. + * @extrefclk: frequency select settings when using 'separate + * reference clocks' for SS and HS operations + * @ref_clk: reference clock to PHY block from which PHY's + * operational clocks are derived + * @ref_rate: rate of above reference clock + */ +struct exynos5_usbdrd_phy { + struct device *dev; + void __iomem *reg_phy; + struct clk *clk; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy_usb_instance { + struct phy *phy; + u32 index; + struct regmap *reg_pmu; + u32 pmu_offset; + const struct exynos5_usbdrd_phy_config *phy_cfg; + } phys[EXYNOS5_DRDPHYS_NUM]; + u32 extrefclk; + struct clk *ref_clk; +}; + +static inline +struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst) +{ + return container_of((inst), struct exynos5_usbdrd_phy, + phys[(inst)->index]); +} + +/* + * exynos5_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS5_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS5_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS5_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS5_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS5_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS5_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS5_FSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS5_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, + unsigned int on) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = on ? 0 : EXYNOS5_PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS5_PHY_ENABLE, val); +} + +/* + * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets multiplier values and spread spectrum + * clock settings for SuperSpeed operations. + */ +static unsigned int +exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) +{ + static u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Use EXTREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL_MASK; + reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + + /* FSEL settings corresponding to reference clock */ + reg &= ~PHYCLKRST_FSEL_PIPE_MASK | + PHYCLKRST_MPLL_MULTIPLIER_MASK | + PHYCLKRST_SSC_REFCLKSEL_MASK; + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + default: + dev_dbg(phy_drd->dev, "unsupported ref clk\n"); + break; + } + + return reg; +} + +/* + * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets the FSEL values for HighSpeed operations. + */ +static unsigned int +exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) +{ + static u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + reg &= ~PHYCLKRST_REFCLKSEL_MASK; + reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + + reg &= ~PHYCLKRST_FSEL_UTMI_MASK | + PHYCLKRST_MPLL_MULTIPLIER_MASK | + PHYCLKRST_SSC_REFCLKSEL_MASK; + reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); + + return reg; +} + +static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + reg |= PHYPARAM1_PCS_TXDEEMPH; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_SSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Set Loss-of-Signal Detector sensitivity */ + reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK; + reg |= PHYPARAM0_REF_LOSLEVEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + reg |= PHYPARAM1_PCS_TXDEEMPH; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static int exynos5_usbdrd_phy_init(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* Reset USB 3.0 PHY */ + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg = LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Select PHY CLK source */ + reg &= ~PHYPARAM0_REF_USE_PAD; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + /* This bit must be set for both HS and SS operations */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + reg |= PHYUTMICLKSEL_UTMI_CLKSEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + /* reference clock settings */ + reg = inst->phy_cfg->set_refclk(inst); + + /* Digital power supply in normal operating mode */ + reg |= PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN | + /* Reset the port */ + PHYCLKRST_PORTRESET; + + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + udelay(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos5_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + reg = PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Resetting the PHYCLKRST enable bits to reduce leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + reg &= ~(PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Control PHYTEST to remove leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg |= PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos5_usbdrd_phy_power_on(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); + + clk_prepare_enable(phy_drd->ref_clk); + + /* Power-on PHY*/ + inst->phy_cfg->phy_isol(inst, 0); + + return 0; +} + +static int exynos5_usbdrd_phy_power_off(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); + + /* Power-off the PHY */ + inst->phy_cfg->phy_isol(inst, 1); + + clk_disable_unprepare(phy_drd->ref_clk); + + return 0; +} + +static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] > EXYNOS5_DRDPHYS_NUM)) + return ERR_PTR(-ENODEV); + + return phy_drd->phys[args->args[0]].phy; +} + +static struct phy_ops exynos5_usbdrd_phy_ops = { + .init = exynos5_usbdrd_phy_init, + .exit = exynos5_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_utmi_init, + .set_refclk = exynos5_usbdrd_utmi_set_refclk, + }, + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_pipe3_init, + .set_refclk = exynos5_usbdrd_pipe3_set_refclk, + }, +}; + +const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL, +}; + +const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, +}; + +static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-usbdrd-phy", + .data = &exynos5250_usbdrd_phy + }, { + .compatible = "samsung,exynos5420-usbdrd-phy", + .data = &exynos5420_usbdrd_phy + }, + { }, +}; + +static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct exynos5_usbdrd_phy *phy_drd; + struct phy_provider *phy_provider; + struct resource *res; + const struct of_device_id *match; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct regmap *reg_pmu; + u32 pmu_offset; + unsigned long ref_rate; + int i, ret; + int channel; + + phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL); + if (!phy_drd) + return -ENOMEM; + + dev_set_drvdata(dev, phy_drd); + phy_drd->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy_drd->reg_phy = devm_ioremap_resource(dev, res); + if (IS_ERR(phy_drd->reg_phy)) + return PTR_ERR(phy_drd->reg_phy); + + match = of_match_node(exynos5_usbdrd_phy_of_match, pdev->dev.of_node); + + drv_data = match->data; + phy_drd->drv_data = drv_data; + + phy_drd->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(phy_drd->clk)) { + dev_err(dev, "Failed to get clock of phy controller\n"); + return PTR_ERR(phy_drd->clk); + } + + phy_drd->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(phy_drd->ref_clk)) { + dev_err(dev, "Failed to get reference clock of usbdrd phy\n"); + return PTR_ERR(phy_drd->ref_clk); + } + ref_rate = clk_get_rate(phy_drd->ref_clk); + + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) { + dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n", + ref_rate); + return ret; + } + + reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(reg_pmu)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(reg_pmu); + } + + /* + * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with + * each having separate power control registers. + * 'channel' facilitates to set such registers. + */ + channel = of_alias_get_id(node, "usbdrdphy"); + if (channel < 0) + dev_dbg(dev, "Not a multi-controller usbdrd phy\n"); + + switch (channel) { + case 1: + pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy; + break; + case 0: + default: + pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy; + break; + } + + dev_vdbg(dev, "Creating usbdrd_phy phy\n"); + + for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, &exynos5_usbdrd_phy_ops, + NULL); + if (IS_ERR(phy)) { + dev_err(dev, "Failed to create usbdrd_phy phy\n"); + return PTR_ERR(phy); + } + + phy_drd->phys[i].phy = phy; + phy_drd->phys[i].index = i; + phy_drd->phys[i].reg_pmu = reg_pmu; + phy_drd->phys[i].pmu_offset = pmu_offset; + phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; + phy_set_drvdata(phy, &phy_drd->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos5_usbdrd_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(phy_drd->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver exynos5_usb3drd_phy = { + .probe = exynos5_usbdrd_phy_probe, + .driver = { + .of_match_table = exynos5_usbdrd_phy_of_match, + .name = "exynos5_usb3drd_phy", + .owner = THIS_MODULE, + } +}; + +module_platform_driver(exynos5_usb3drd_phy); +MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver"); +MODULE_AUTHOR("Vivek Gautam "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:exynos5_usb3drd_phy"); diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h new file mode 100644 index 000000000000..00ef24bf6ede --- /dev/null +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -0,0 +1,44 @@ +/* + * Exynos5 SoC series Power Management Unit (PMU) register offsets + * and bit definitions. + * + * Copyright (C) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ +#define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ + +/* Exynos5 PMU register definitions */ +#define EXYNOS5_HDMI_PHY_CONTROL (0x700) +#define EXYNOS5_USBDRD_PHY_CONTROL (0x704) + +/* Exynos5250 specific register definitions */ +#define EXYNOS5_USBHOST_PHY_CONTROL (0x708) +#define EXYNOS5_EFNAND_PHY_CONTROL (0x70c) +#define EXYNOS5_MIPI_PHY0_CONTROL (0x710) +#define EXYNOS5_MIPI_PHY1_CONTROL (0x714) +#define EXYNOS5_ADC_PHY_CONTROL (0x718) +#define EXYNOS5_MTCADC_PHY_CONTROL (0x71c) +#define EXYNOS5_DPTX_PHY_CONTROL (0x720) +#define EXYNOS5_SATA_PHY_CONTROL (0x724) + +/* Exynos5420 specific register definitions */ +#define EXYNOS5420_USBDRD1_PHY_CONTROL (0x708) +#define EXYNOS5420_USBHOST_PHY_CONTROL (0x70c) +#define EXYNOS5420_MIPI_PHY0_CONTROL (0x714) +#define EXYNOS5420_MIPI_PHY1_CONTROL (0x718) +#define EXYNOS5420_MIPI_PHY2_CONTROL (0x71c) +#define EXYNOS5420_ADC_PHY_CONTROL (0x720) +#define EXYNOS5420_MTCADC_PHY_CONTROL (0x724) +#define EXYNOS5420_DPTX_PHY_CONTROL (0x728) + +#define EXYNOS5_PHY_ENABLE BIT(0) + +#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) +#define EXYNOS5_MIPI_PHY_M_RESETN BIT(2) + +#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */ From 4fc8a4e65fda3271357bbea933206851736894da Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 13 May 2014 15:30:17 +0530 Subject: [PATCH 094/314] phy: exynos5-usbdrd: Add facility for VBUS supply Adding support to enable/disable VBUS controlled by a regulator, to enable vbus supply on the port. Signed-off-by: Vivek Gautam Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-exynos5-usbdrd.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c index 8fcdd9434346..76d862b2202f 100644 --- a/drivers/phy/phy-exynos5-usbdrd.c +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -24,6 +24,7 @@ #include #include #include +#include /* Exynos USB PHY registers */ #define EXYNOS5_FSEL_9MHZ6 0x0 @@ -170,6 +171,7 @@ struct exynos5_usbdrd_phy { } phys[EXYNOS5_DRDPHYS_NUM]; u32 extrefclk; struct clk *ref_clk; + struct regulator *vbus; }; static inline @@ -438,6 +440,7 @@ static int exynos5_usbdrd_phy_exit(struct phy *phy) static int exynos5_usbdrd_phy_power_on(struct phy *phy) { + int ret; struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); @@ -445,10 +448,24 @@ static int exynos5_usbdrd_phy_power_on(struct phy *phy) clk_prepare_enable(phy_drd->ref_clk); + /* Enable VBUS supply */ + if (phy_drd->vbus) { + ret = regulator_enable(phy_drd->vbus); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable VBUS supply\n"); + goto fail_vbus; + } + } + /* Power-on PHY*/ inst->phy_cfg->phy_isol(inst, 0); return 0; + +fail_vbus: + clk_disable_unprepare(phy_drd->ref_clk); + + return ret; } static int exynos5_usbdrd_phy_power_off(struct phy *phy) @@ -461,6 +478,10 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy) /* Power-off the PHY */ inst->phy_cfg->phy_isol(inst, 1); + /* Disable VBUS supply */ + if (phy_drd->vbus) + regulator_disable(phy_drd->vbus); + clk_disable_unprepare(phy_drd->ref_clk); return 0; @@ -600,6 +621,17 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) break; } + /* Get Vbus regulator */ + phy_drd->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(phy_drd->vbus)) { + ret = PTR_ERR(phy_drd->vbus); + if (ret == -EPROBE_DEFER) + return ret; + + dev_warn(dev, "Failed to get VBUS supply regulator\n"); + phy_drd->vbus = NULL; + } + dev_vdbg(dev, "Creating usbdrd_phy phy\n"); for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { From 2a7f9982d6c188052b85a6488c7008a45c4a062c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 13 May 2014 17:44:17 +0200 Subject: [PATCH 095/314] phy: sunxi: Rework phy initialization Move the phy initialization and variables declaration to the loop itself, since it is where it really belongs. Also remove all the temporary variables, we can use the structure members directly. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 42 ++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 24 deletions(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index e6e6c4ba7145..66a87d50512b 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -224,13 +224,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) struct sun4i_usb_phy_data *data; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; - void __iomem *pmu = NULL; struct phy_provider *phy_provider; - struct reset_control *reset; - struct regulator *vbus; struct resource *res; - struct phy *phy; - char name[16]; int i; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); @@ -262,42 +257,41 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) /* Skip 0, 0 is the phy for otg which is not yet supported. */ for (i = 1; i < data->num_phys; i++) { + struct sun4i_usb_phy *phy = data->phys + i; + char name[16]; + snprintf(name, sizeof(name), "usb%d_vbus", i); - vbus = devm_regulator_get_optional(dev, name); - if (IS_ERR(vbus)) { - if (PTR_ERR(vbus) == -EPROBE_DEFER) + phy->vbus = devm_regulator_get_optional(dev, name); + if (IS_ERR(phy->vbus)) { + if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) return -EPROBE_DEFER; - vbus = NULL; + phy->vbus = NULL; } snprintf(name, sizeof(name), "usb%d_reset", i); - reset = devm_reset_control_get(dev, name); - if (IS_ERR(reset)) { + phy->reset = devm_reset_control_get(dev, name); + if (IS_ERR(phy->reset)) { dev_err(dev, "failed to get reset %s\n", name); - return PTR_ERR(reset); + return PTR_ERR(phy->reset); } if (i) { /* No pmu for usbc0 */ snprintf(name, sizeof(name), "pmu%d", i); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); - pmu = devm_ioremap_resource(dev, res); - if (IS_ERR(pmu)) - return PTR_ERR(pmu); + phy->pmu = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->pmu)) + return PTR_ERR(phy->pmu); } - phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL); - if (IS_ERR(phy)) { + phy->phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL); + if (IS_ERR(phy->phy)) { dev_err(dev, "failed to create PHY %d\n", i); - return PTR_ERR(phy); + return PTR_ERR(phy->phy); } - data->phys[i].phy = phy; - data->phys[i].pmu = pmu; - data->phys[i].vbus = vbus; - data->phys[i].reset = reset; - data->phys[i].index = i; - phy_set_drvdata(phy, &data->phys[i]); + phy->index = i; + phy_set_drvdata(phy->phy, &data->phys[i]); } dev_set_drvdata(dev, data); From fecc2d785ba99ce219f5c10d3b416dc9e74516b1 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 14 May 2014 14:58:57 +0200 Subject: [PATCH 096/314] Documentation: dt: Add new compatible for the A31 USB Phy Document the freshly introduced compatible for the USB phy in use in the Allwinner A31 SoC. Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/sun4i-usb-phy.txt | 23 ++++++++++++++----- 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index a82361b62015..16528b9eb561 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -2,15 +2,26 @@ Allwinner sun4i USB PHY ----------------------- Required properties: -- compatible : should be one of "allwinner,sun4i-a10-usb-phy", - "allwinner,sun5i-a13-usb-phy" or "allwinner,sun7i-a20-usb-phy" +- compatible : should be one of + * allwinner,sun4i-a10-usb-phy + * allwinner,sun5i-a13-usb-phy + * allwinner,sun6i-a31-usb-phy + * allwinner,sun7i-a20-usb-phy - reg : a list of offset + length pairs -- reg-names : "phy_ctrl", "pmu1" and for sun4i or sun7i "pmu2" +- reg-names : + * "phy_ctrl" + * "pmu1" + * "pmu2" for sun4i, sun6i or sun7i - #phy-cells : from the generic phy bindings, must be 1 -- clocks : phandle + clock specifier for the phy clock -- clock-names : "usb_phy" +- clocks : phandle + clock specifier for the phy clocks +- clock-names : + * "usb_phy" for sun4i, sun5i or sun7i + * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i - resets : a list of phandle + reset specifier pairs -- reset-names : "usb0_reset", "usb1_reset" and for sun4i or sun7i "usb2_reset" +- reset-names : + * "usb0_reset" + * "usb1_reset" + * "usb2_reset" for sun4i, sun6i or sun7i Example: usbphy: phy@0x01c13400 { From eadd43123933e8c0a55245c51de68668e620e27f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 13 May 2014 17:44:18 +0200 Subject: [PATCH 097/314] phy: usb: sunxi: Introduce Allwinner A31 USB PHY support The USB phy controller in the A31 differs mostly from the older controllers because it has a clock dedicated for each phy, while the older ones were having a single clock for all the phys. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 33 ++++++++++++++++++++++----------- 1 file changed, 22 insertions(+), 11 deletions(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 66a87d50512b..115d8d5190d5 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -61,7 +61,6 @@ #define MAX_PHYS 3 struct sun4i_usb_phy_data { - struct clk *clk; void __iomem *base; struct mutex mutex; int num_phys; @@ -71,6 +70,7 @@ struct sun4i_usb_phy_data { void __iomem *pmu; struct regulator *vbus; struct reset_control *reset; + struct clk *clk; int index; } phys[MAX_PHYS]; }; @@ -146,13 +146,13 @@ static int sun4i_usb_phy_init(struct phy *_phy) struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); int ret; - ret = clk_prepare_enable(data->clk); + ret = clk_prepare_enable(phy->clk); if (ret) return ret; ret = reset_control_deassert(phy->reset); if (ret) { - clk_disable_unprepare(data->clk); + clk_disable_unprepare(phy->clk); return ret; } @@ -170,11 +170,10 @@ static int sun4i_usb_phy_init(struct phy *_phy) static int sun4i_usb_phy_exit(struct phy *_phy) { struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); - struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); sun4i_usb_phy_passby(phy, 0); reset_control_assert(phy->reset); - clk_disable_unprepare(data->clk); + clk_disable_unprepare(phy->clk); return 0; } @@ -225,6 +224,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct phy_provider *phy_provider; + bool dedicated_clocks; struct resource *res; int i; @@ -244,17 +244,16 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) else data->disc_thresh = 2; + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) + dedicated_clocks = true; + else + dedicated_clocks = false; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); data->base = devm_ioremap_resource(dev, res); if (IS_ERR(data->base)) return PTR_ERR(data->base); - data->clk = devm_clk_get(dev, "usb_phy"); - if (IS_ERR(data->clk)) { - dev_err(dev, "could not get usb_phy clock\n"); - return PTR_ERR(data->clk); - } - /* Skip 0, 0 is the phy for otg which is not yet supported. */ for (i = 1; i < data->num_phys; i++) { struct sun4i_usb_phy *phy = data->phys + i; @@ -268,6 +267,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) phy->vbus = NULL; } + if (dedicated_clocks) + snprintf(name, sizeof(name), "usb%d_phy", i); + else + strlcpy(name, "usb_phy", sizeof(name)); + + phy->clk = devm_clk_get(dev, name); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk); + } + snprintf(name, sizeof(name), "usb%d_reset", i); phy->reset = devm_reset_control_get(dev, name); if (IS_ERR(phy->reset)) { @@ -305,6 +315,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun4i-a10-usb-phy" }, { .compatible = "allwinner,sun5i-a13-usb-phy" }, + { .compatible = "allwinner,sun6i-a31-usb-phy" }, { .compatible = "allwinner,sun7i-a20-usb-phy" }, { }, }; From b34e08d5c7062c19a3f582d23d5f649c79ff3409 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Tue, 11 Feb 2014 11:43:03 +0100 Subject: [PATCH 098/314] tools: usb: aio example applications This patch adds two example applications showing usage of Asynchronous I/O API of FunctionFS. First one (aio_simple) is simple example of bidirectional data transfer. Second one (aio_multibuff) shows multi-buffer data transfer, which may to be used in high performance applications. Both examples contains userspace applications for device and for host. It needs libaio library on the device, and libusb library on host. Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi --- .../multibuff/device_app/aio_multibuff.c | 349 ++++++++++++++++++ .../multibuff/host_app/Makefile | 13 + .../ffs-aio-example/multibuff/host_app/test.c | 146 ++++++++ .../simple/device_app/aio_simple.c | 335 +++++++++++++++++ .../ffs-aio-example/simple/host_app/Makefile | 13 + .../ffs-aio-example/simple/host_app/test.c | 148 ++++++++ 6 files changed, 1004 insertions(+) create mode 100644 tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c create mode 100644 tools/usb/ffs-aio-example/multibuff/host_app/Makefile create mode 100644 tools/usb/ffs-aio-example/multibuff/host_app/test.c create mode 100644 tools/usb/ffs-aio-example/simple/device_app/aio_simple.c create mode 100644 tools/usb/ffs-aio-example/simple/host_app/Makefile create mode 100644 tools/usb/ffs-aio-example/simple/host_app/test.c diff --git a/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c b/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c new file mode 100644 index 000000000000..87216a0c4a8b --- /dev/null +++ b/tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c @@ -0,0 +1,349 @@ +#define _BSD_SOURCE /* for endian.h */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libaio.h" +#define IOCB_FLAG_RESFD (1 << 0) + +#include + +#define BUF_LEN 8192 +#define BUFS_MAX 128 +#define AIO_MAX (BUFS_MAX*2) + +/******************** Descriptors and Strings *******************************/ + +static const struct { + struct usb_functionfs_descs_head header; + struct { + struct usb_interface_descriptor intf; + struct usb_endpoint_descriptor_no_audio bulk_sink; + struct usb_endpoint_descriptor_no_audio bulk_source; + } __attribute__ ((__packed__)) fs_descs, hs_descs; +} __attribute__ ((__packed__)) descriptors = { + .header = { + .magic = htole32(FUNCTIONFS_DESCRIPTORS_MAGIC), + .length = htole32(sizeof(descriptors)), + .fs_count = 3, + .hs_count = 3, + }, + .fs_descs = { + .intf = { + .bLength = sizeof(descriptors.fs_descs.intf), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .iInterface = 1, + }, + .bulk_sink = { + .bLength = sizeof(descriptors.fs_descs.bulk_sink), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 1 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + .bulk_source = { + .bLength = sizeof(descriptors.fs_descs.bulk_source), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 2 | USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + }, + .hs_descs = { + .intf = { + .bLength = sizeof(descriptors.hs_descs.intf), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .iInterface = 1, + }, + .bulk_sink = { + .bLength = sizeof(descriptors.hs_descs.bulk_sink), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 1 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = htole16(512), + }, + .bulk_source = { + .bLength = sizeof(descriptors.hs_descs.bulk_source), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 2 | USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = htole16(512), + }, + }, +}; + +#define STR_INTERFACE "AIO Test" + +static const struct { + struct usb_functionfs_strings_head header; + struct { + __le16 code; + const char str1[sizeof(STR_INTERFACE)]; + } __attribute__ ((__packed__)) lang0; +} __attribute__ ((__packed__)) strings = { + .header = { + .magic = htole32(FUNCTIONFS_STRINGS_MAGIC), + .length = htole32(sizeof(strings)), + .str_count = htole32(1), + .lang_count = htole32(1), + }, + .lang0 = { + htole16(0x0409), /* en-us */ + STR_INTERFACE, + }, +}; + +/********************** Buffer structure *******************************/ + +struct io_buffer { + struct iocb **iocb; + unsigned char **buf; + unsigned cnt; + unsigned len; + unsigned requested; +}; + +/******************** Endpoints handling *******************************/ + +static void display_event(struct usb_functionfs_event *event) +{ + static const char *const names[] = { + [FUNCTIONFS_BIND] = "BIND", + [FUNCTIONFS_UNBIND] = "UNBIND", + [FUNCTIONFS_ENABLE] = "ENABLE", + [FUNCTIONFS_DISABLE] = "DISABLE", + [FUNCTIONFS_SETUP] = "SETUP", + [FUNCTIONFS_SUSPEND] = "SUSPEND", + [FUNCTIONFS_RESUME] = "RESUME", + }; + switch (event->type) { + case FUNCTIONFS_BIND: + case FUNCTIONFS_UNBIND: + case FUNCTIONFS_ENABLE: + case FUNCTIONFS_DISABLE: + case FUNCTIONFS_SETUP: + case FUNCTIONFS_SUSPEND: + case FUNCTIONFS_RESUME: + printf("Event %s\n", names[event->type]); + } +} + +static void handle_ep0(int ep0, bool *ready) +{ + int ret; + struct usb_functionfs_event event; + + ret = read(ep0, &event, sizeof(event)); + if (!ret) { + perror("unable to read event from ep0"); + return; + } + display_event(&event); + switch (event.type) { + case FUNCTIONFS_SETUP: + if (event.u.setup.bRequestType & USB_DIR_IN) + write(ep0, NULL, 0); + else + read(ep0, NULL, 0); + break; + + case FUNCTIONFS_ENABLE: + *ready = true; + break; + + case FUNCTIONFS_DISABLE: + *ready = false; + break; + + default: + break; + } +} + +void init_bufs(struct io_buffer *iobuf, unsigned n, unsigned len) +{ + unsigned i; + iobuf->buf = malloc(n*sizeof(*iobuf->buf)); + iobuf->iocb = malloc(n*sizeof(*iobuf->iocb)); + iobuf->cnt = n; + iobuf->len = len; + iobuf->requested = 0; + for (i = 0; i < n; ++i) { + iobuf->buf[i] = malloc(len*sizeof(**iobuf->buf)); + iobuf->iocb[i] = malloc(sizeof(**iobuf->iocb)); + } + iobuf->cnt = n; +} + +void delete_bufs(struct io_buffer *iobuf) +{ + unsigned i; + for (i = 0; i < iobuf->cnt; ++i) { + free(iobuf->buf[i]); + free(iobuf->iocb[i]); + } + free(iobuf->buf); + free(iobuf->iocb); +} + +int main(int argc, char *argv[]) +{ + int ret; + unsigned i, j; + char *ep_path; + + int ep0, ep1; + + io_context_t ctx; + + int evfd; + fd_set rfds; + + struct io_buffer iobuf[2]; + int actual = 0; + bool ready; + + if (argc != 2) { + printf("ffs directory not specified!\n"); + return 1; + } + + ep_path = malloc(strlen(argv[1]) + 4 /* "/ep#" */ + 1 /* '\0' */); + if (!ep_path) { + perror("malloc"); + return 1; + } + + /* open endpoint files */ + sprintf(ep_path, "%s/ep0", argv[1]); + ep0 = open(ep_path, O_RDWR); + if (ep0 < 0) { + perror("unable to open ep0"); + return 1; + } + if (write(ep0, &descriptors, sizeof(descriptors)) < 0) { + perror("unable do write descriptors"); + return 1; + } + if (write(ep0, &strings, sizeof(strings)) < 0) { + perror("unable to write strings"); + return 1; + } + sprintf(ep_path, "%s/ep1", argv[1]); + ep1 = open(ep_path, O_RDWR); + if (ep1 < 0) { + perror("unable to open ep1"); + return 1; + } + + free(ep_path); + + memset(&ctx, 0, sizeof(ctx)); + /* setup aio context to handle up to AIO_MAX requests */ + if (io_setup(AIO_MAX, &ctx) < 0) { + perror("unable to setup aio"); + return 1; + } + + evfd = eventfd(0, 0); + if (evfd < 0) { + perror("unable to open eventfd"); + return 1; + } + + for (i = 0; i < sizeof(iobuf)/sizeof(*iobuf); ++i) + init_bufs(&iobuf[i], BUFS_MAX, BUF_LEN); + + while (1) { + FD_ZERO(&rfds); + FD_SET(ep0, &rfds); + FD_SET(evfd, &rfds); + + ret = select(((ep0 > evfd) ? ep0 : evfd)+1, + &rfds, NULL, NULL, NULL); + if (ret < 0) { + if (errno == EINTR) + continue; + perror("select"); + break; + } + + if (FD_ISSET(ep0, &rfds)) + handle_ep0(ep0, &ready); + + /* we are waiting for function ENABLE */ + if (!ready) + continue; + + /* + * when we're preparing new data to submit, + * second buffer being transmitted + */ + for (i = 0; i < sizeof(iobuf)/sizeof(*iobuf); ++i) { + if (iobuf[i].requested) + continue; + /* prepare requests */ + for (j = 0; j < iobuf[i].cnt; ++j) { + io_prep_pwrite(iobuf[i].iocb[j], ep1, + iobuf[i].buf[j], + iobuf[i].len, 0); + /* enable eventfd notification */ + iobuf[i].iocb[j]->u.c.flags |= IOCB_FLAG_RESFD; + iobuf[i].iocb[j]->u.c.resfd = evfd; + } + /* submit table of requests */ + ret = io_submit(ctx, iobuf[i].cnt, iobuf[i].iocb); + if (ret >= 0) { + iobuf[i].requested = ret; + printf("submit: %d requests buf: %d\n", ret, i); + } else + perror("unable to submit reqests"); + } + + /* if event is ready to read */ + if (!FD_ISSET(evfd, &rfds)) + continue; + + uint64_t ev_cnt; + ret = read(evfd, &ev_cnt, sizeof(ev_cnt)); + if (ret < 0) { + perror("unable to read eventfd"); + break; + } + + struct io_event e[BUFS_MAX]; + /* we read aio events */ + ret = io_getevents(ctx, 1, BUFS_MAX, e, NULL); + if (ret > 0) /* if we got events */ + iobuf[actual].requested -= ret; + + /* if all req's from iocb completed */ + if (!iobuf[actual].requested) + actual = (actual + 1)%(sizeof(iobuf)/sizeof(*iobuf)); + } + + /* free resources */ + + for (i = 0; i < sizeof(iobuf)/sizeof(*iobuf); ++i) + delete_bufs(&iobuf[i]); + io_destroy(ctx); + + close(ep1); + close(ep0); + + return 0; +} diff --git a/tools/usb/ffs-aio-example/multibuff/host_app/Makefile b/tools/usb/ffs-aio-example/multibuff/host_app/Makefile new file mode 100644 index 000000000000..8c4a6f0aa82d --- /dev/null +++ b/tools/usb/ffs-aio-example/multibuff/host_app/Makefile @@ -0,0 +1,13 @@ +CC = gcc +LIBUSB_CFLAGS = $(shell pkg-config --cflags libusb-1.0) +LIBUSB_LIBS = $(shell pkg-config --libs libusb-1.0) +WARNINGS = -Wall -Wextra +CFLAGS = $(LIBUSB_CFLAGS) $(WARNINGS) +LDFLAGS = $(LIBUSB_LIBS) + +all: test +%: %.c + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) + +clean: + $(RM) test diff --git a/tools/usb/ffs-aio-example/multibuff/host_app/test.c b/tools/usb/ffs-aio-example/multibuff/host_app/test.c new file mode 100644 index 000000000000..b0ad8747d03f --- /dev/null +++ b/tools/usb/ffs-aio-example/multibuff/host_app/test.c @@ -0,0 +1,146 @@ +#include +#include +#include +#include + +#define VENDOR 0x1d6b +#define PRODUCT 0x0105 + +/* endpoints indexes */ + +#define EP_BULK_IN (1 | LIBUSB_ENDPOINT_IN) +#define EP_BULK_OUT (2 | LIBUSB_ENDPOINT_OUT) + +#define BUF_LEN 8192 + +/* + * struct test_state - describes test program state + * @list: list of devices returned by libusb_get_device_list function + * @found: pointer to struct describing tested device + * @ctx: context, set to NULL + * @handle: handle of tested device + * @attached: indicates that device was attached to kernel, and has to be + * reattached at the end of test program + */ + +struct test_state { + libusb_device *found; + libusb_context *ctx; + libusb_device_handle *handle; + int attached; +}; + +/* + * test_init - initialize test program + */ + +int test_init(struct test_state *state) +{ + int i, ret; + ssize_t cnt; + libusb_device **list; + + state->found = NULL; + state->ctx = NULL; + state->handle = NULL; + state->attached = 0; + + ret = libusb_init(&state->ctx); + if (ret) { + printf("cannot init libusb: %s\n", libusb_error_name(ret)); + return 1; + } + + cnt = libusb_get_device_list(state->ctx, &list); + if (cnt <= 0) { + printf("no devices found\n"); + goto error1; + } + + for (i = 0; i < cnt; ++i) { + libusb_device *dev = list[i]; + struct libusb_device_descriptor desc; + ret = libusb_get_device_descriptor(dev, &desc); + if (ret) { + printf("unable to get device descriptor: %s\n", + libusb_error_name(ret)); + goto error2; + } + if (desc.idVendor == VENDOR && desc.idProduct == PRODUCT) { + state->found = dev; + break; + } + } + + if (!state->found) { + printf("no devices found\n"); + goto error2; + } + + ret = libusb_open(state->found, &state->handle); + if (ret) { + printf("cannot open device: %s\n", libusb_error_name(ret)); + goto error2; + } + + if (libusb_claim_interface(state->handle, 0)) { + ret = libusb_detach_kernel_driver(state->handle, 0); + if (ret) { + printf("unable to detach kernel driver: %s\n", + libusb_error_name(ret)); + goto error3; + } + state->attached = 1; + ret = libusb_claim_interface(state->handle, 0); + if (ret) { + printf("cannot claim interface: %s\n", + libusb_error_name(ret)); + goto error4; + } + } + + return 0; + +error4: + if (state->attached == 1) + libusb_attach_kernel_driver(state->handle, 0); + +error3: + libusb_close(state->handle); + +error2: + libusb_free_device_list(list, 1); + +error1: + libusb_exit(state->ctx); + return 1; +} + +/* + * test_exit - cleanup test program + */ + +void test_exit(struct test_state *state) +{ + libusb_release_interface(state->handle, 0); + if (state->attached == 1) + libusb_attach_kernel_driver(state->handle, 0); + libusb_close(state->handle); + libusb_exit(state->ctx); +} + +int main(void) +{ + struct test_state state; + + if (test_init(&state)) + return 1; + + while (1) { + static unsigned char buffer[BUF_LEN]; + int bytes; + libusb_bulk_transfer(state.handle, EP_BULK_IN, buffer, BUF_LEN, + &bytes, 500); + } + test_exit(&state); +} diff --git a/tools/usb/ffs-aio-example/simple/device_app/aio_simple.c b/tools/usb/ffs-aio-example/simple/device_app/aio_simple.c new file mode 100644 index 000000000000..f558664a3317 --- /dev/null +++ b/tools/usb/ffs-aio-example/simple/device_app/aio_simple.c @@ -0,0 +1,335 @@ +#define _BSD_SOURCE /* for endian.h */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libaio.h" +#define IOCB_FLAG_RESFD (1 << 0) + +#include + +#define BUF_LEN 8192 + +/******************** Descriptors and Strings *******************************/ + +static const struct { + struct usb_functionfs_descs_head header; + struct { + struct usb_interface_descriptor intf; + struct usb_endpoint_descriptor_no_audio bulk_sink; + struct usb_endpoint_descriptor_no_audio bulk_source; + } __attribute__ ((__packed__)) fs_descs, hs_descs; +} __attribute__ ((__packed__)) descriptors = { + .header = { + .magic = htole32(FUNCTIONFS_DESCRIPTORS_MAGIC), + .length = htole32(sizeof(descriptors)), + .fs_count = 3, + .hs_count = 3, + }, + .fs_descs = { + .intf = { + .bLength = sizeof(descriptors.fs_descs.intf), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .iInterface = 1, + }, + .bulk_sink = { + .bLength = sizeof(descriptors.fs_descs.bulk_sink), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 1 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + .bulk_source = { + .bLength = sizeof(descriptors.fs_descs.bulk_source), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 2 | USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + }, + .hs_descs = { + .intf = { + .bLength = sizeof(descriptors.hs_descs.intf), + .bDescriptorType = USB_DT_INTERFACE, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .iInterface = 1, + }, + .bulk_sink = { + .bLength = sizeof(descriptors.hs_descs.bulk_sink), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 1 | USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + .bulk_source = { + .bLength = sizeof(descriptors.hs_descs.bulk_source), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 2 | USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + }, + }, +}; + +#define STR_INTERFACE "AIO Test" + +static const struct { + struct usb_functionfs_strings_head header; + struct { + __le16 code; + const char str1[sizeof(STR_INTERFACE)]; + } __attribute__ ((__packed__)) lang0; +} __attribute__ ((__packed__)) strings = { + .header = { + .magic = htole32(FUNCTIONFS_STRINGS_MAGIC), + .length = htole32(sizeof(strings)), + .str_count = htole32(1), + .lang_count = htole32(1), + }, + .lang0 = { + htole16(0x0409), /* en-us */ + STR_INTERFACE, + }, +}; + +/******************** Endpoints handling *******************************/ + +static void display_event(struct usb_functionfs_event *event) +{ + static const char *const names[] = { + [FUNCTIONFS_BIND] = "BIND", + [FUNCTIONFS_UNBIND] = "UNBIND", + [FUNCTIONFS_ENABLE] = "ENABLE", + [FUNCTIONFS_DISABLE] = "DISABLE", + [FUNCTIONFS_SETUP] = "SETUP", + [FUNCTIONFS_SUSPEND] = "SUSPEND", + [FUNCTIONFS_RESUME] = "RESUME", + }; + switch (event->type) { + case FUNCTIONFS_BIND: + case FUNCTIONFS_UNBIND: + case FUNCTIONFS_ENABLE: + case FUNCTIONFS_DISABLE: + case FUNCTIONFS_SETUP: + case FUNCTIONFS_SUSPEND: + case FUNCTIONFS_RESUME: + printf("Event %s\n", names[event->type]); + } +} + +static void handle_ep0(int ep0, bool *ready) +{ + struct usb_functionfs_event event; + int ret; + + struct pollfd pfds[1]; + pfds[0].fd = ep0; + pfds[0].events = POLLIN; + + ret = poll(pfds, 1, 0); + + if (ret && (pfds[0].revents & POLLIN)) { + ret = read(ep0, &event, sizeof(event)); + if (!ret) { + perror("unable to read event from ep0"); + return; + } + display_event(&event); + switch (event.type) { + case FUNCTIONFS_SETUP: + if (event.u.setup.bRequestType & USB_DIR_IN) + write(ep0, NULL, 0); + else + read(ep0, NULL, 0); + break; + + case FUNCTIONFS_ENABLE: + *ready = true; + break; + + case FUNCTIONFS_DISABLE: + *ready = false; + break; + + default: + break; + } + } +} + +int main(int argc, char *argv[]) +{ + int i, ret; + char *ep_path; + + int ep0; + int ep[2]; + + io_context_t ctx; + + int evfd; + fd_set rfds; + + char *buf_in, *buf_out; + struct iocb *iocb_in, *iocb_out; + int req_in = 0, req_out = 0; + bool ready; + + if (argc != 2) { + printf("ffs directory not specified!\n"); + return 1; + } + + ep_path = malloc(strlen(argv[1]) + 4 /* "/ep#" */ + 1 /* '\0' */); + if (!ep_path) { + perror("malloc"); + return 1; + } + + /* open endpoint files */ + sprintf(ep_path, "%s/ep0", argv[1]); + ep0 = open(ep_path, O_RDWR); + if (ep0 < 0) { + perror("unable to open ep0"); + return 1; + } + if (write(ep0, &descriptors, sizeof(descriptors)) < 0) { + perror("unable do write descriptors"); + return 1; + } + if (write(ep0, &strings, sizeof(strings)) < 0) { + perror("unable to write strings"); + return 1; + } + for (i = 0; i < 2; ++i) { + sprintf(ep_path, "%s/ep%d", argv[1], i+1); + ep[i] = open(ep_path, O_RDWR); + if (ep[i] < 0) { + printf("unable to open ep%d: %s\n", i+1, + strerror(errno)); + return 1; + } + } + + free(ep_path); + + memset(&ctx, 0, sizeof(ctx)); + /* setup aio context to handle up to 2 requests */ + if (io_setup(2, &ctx) < 0) { + perror("unable to setup aio"); + return 1; + } + + evfd = eventfd(0, 0); + if (evfd < 0) { + perror("unable to open eventfd"); + return 1; + } + + /* alloc buffers and requests */ + buf_in = malloc(BUF_LEN); + buf_out = malloc(BUF_LEN); + iocb_in = malloc(sizeof(*iocb_in)); + iocb_out = malloc(sizeof(*iocb_out)); + + while (1) { + FD_ZERO(&rfds); + FD_SET(ep0, &rfds); + FD_SET(evfd, &rfds); + + ret = select(((ep0 > evfd) ? ep0 : evfd)+1, + &rfds, NULL, NULL, NULL); + if (ret < 0) { + if (errno == EINTR) + continue; + perror("select"); + break; + } + + if (FD_ISSET(ep0, &rfds)) + handle_ep0(ep0, &ready); + + /* we are waiting for function ENABLE */ + if (!ready) + continue; + + /* if something was submitted we wait for event */ + if (FD_ISSET(evfd, &rfds)) { + uint64_t ev_cnt; + ret = read(evfd, &ev_cnt, sizeof(ev_cnt)); + if (ret < 0) { + perror("unable to read eventfd"); + break; + } + + struct io_event e[2]; + /* we wait for one event */ + ret = io_getevents(ctx, 1, 2, e, NULL); + /* if we got event */ + for (i = 0; i < ret; ++i) { + if (e[i].obj->aio_fildes == ep[0]) { + printf("ev=in; ret=%lu\n", e[i].res); + req_in = 0; + } else if (e[i].obj->aio_fildes == ep[1]) { + printf("ev=out; ret=%lu\n", e[i].res); + req_out = 0; + } + } + } + + if (!req_in) { /* if IN transfer not requested*/ + /* prepare write request */ + io_prep_pwrite(iocb_in, ep[0], buf_in, BUF_LEN, 0); + /* enable eventfd notification */ + iocb_in->u.c.flags |= IOCB_FLAG_RESFD; + iocb_in->u.c.resfd = evfd; + /* submit table of requests */ + ret = io_submit(ctx, 1, &iocb_in); + if (ret >= 0) { /* if ret > 0 request is queued */ + req_in = 1; + printf("submit: in\n"); + } else + perror("unable to submit request"); + } + if (!req_out) { /* if OUT transfer not requested */ + /* prepare read request */ + io_prep_pread(iocb_out, ep[1], buf_out, BUF_LEN, 0); + /* enable eventfs notification */ + iocb_out->u.c.flags |= IOCB_FLAG_RESFD; + iocb_out->u.c.resfd = evfd; + /* submit table of requests */ + ret = io_submit(ctx, 1, &iocb_out); + if (ret >= 0) { /* if ret > 0 request is queued */ + req_out = 1; + printf("submit: out\n"); + } else + perror("unable to submit request"); + } + } + + /* free resources */ + + io_destroy(ctx); + + free(buf_in); + free(buf_out); + free(iocb_in); + free(iocb_out); + + for (i = 0; i < 2; ++i) + close(ep[i]); + close(ep0); + + return 0; +} diff --git a/tools/usb/ffs-aio-example/simple/host_app/Makefile b/tools/usb/ffs-aio-example/simple/host_app/Makefile new file mode 100644 index 000000000000..8c4a6f0aa82d --- /dev/null +++ b/tools/usb/ffs-aio-example/simple/host_app/Makefile @@ -0,0 +1,13 @@ +CC = gcc +LIBUSB_CFLAGS = $(shell pkg-config --cflags libusb-1.0) +LIBUSB_LIBS = $(shell pkg-config --libs libusb-1.0) +WARNINGS = -Wall -Wextra +CFLAGS = $(LIBUSB_CFLAGS) $(WARNINGS) +LDFLAGS = $(LIBUSB_LIBS) + +all: test +%: %.c + $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) + +clean: + $(RM) test diff --git a/tools/usb/ffs-aio-example/simple/host_app/test.c b/tools/usb/ffs-aio-example/simple/host_app/test.c new file mode 100644 index 000000000000..64b6a57d8ca3 --- /dev/null +++ b/tools/usb/ffs-aio-example/simple/host_app/test.c @@ -0,0 +1,148 @@ +#include +#include +#include +#include + +#define VENDOR 0x1d6b +#define PRODUCT 0x0105 + +/* endpoints indexes */ + +#define EP_BULK_IN (1 | LIBUSB_ENDPOINT_IN) +#define EP_BULK_OUT (2 | LIBUSB_ENDPOINT_OUT) + +#define BUF_LEN 8192 + +/* + * struct test_state - describes test program state + * @list: list of devices returned by libusb_get_device_list function + * @found: pointer to struct describing tested device + * @ctx: context, set to NULL + * @handle: handle of tested device + * @attached: indicates that device was attached to kernel, and has to be + * reattached at the end of test program + */ + +struct test_state { + libusb_device *found; + libusb_context *ctx; + libusb_device_handle *handle; + int attached; +}; + +/* + * test_init - initialize test program + */ + +int test_init(struct test_state *state) +{ + int i, ret; + ssize_t cnt; + libusb_device **list; + + state->found = NULL; + state->ctx = NULL; + state->handle = NULL; + state->attached = 0; + + ret = libusb_init(&state->ctx); + if (ret) { + printf("cannot init libusb: %s\n", libusb_error_name(ret)); + return 1; + } + + cnt = libusb_get_device_list(state->ctx, &list); + if (cnt <= 0) { + printf("no devices found\n"); + goto error1; + } + + for (i = 0; i < cnt; ++i) { + libusb_device *dev = list[i]; + struct libusb_device_descriptor desc; + ret = libusb_get_device_descriptor(dev, &desc); + if (ret) { + printf("unable to get device descriptor: %s\n", + libusb_error_name(ret)); + goto error2; + } + if (desc.idVendor == VENDOR && desc.idProduct == PRODUCT) { + state->found = dev; + break; + } + } + + if (!state->found) { + printf("no devices found\n"); + goto error2; + } + + ret = libusb_open(state->found, &state->handle); + if (ret) { + printf("cannot open device: %s\n", libusb_error_name(ret)); + goto error2; + } + + if (libusb_claim_interface(state->handle, 0)) { + ret = libusb_detach_kernel_driver(state->handle, 0); + if (ret) { + printf("unable to detach kernel driver: %s\n", + libusb_error_name(ret)); + goto error3; + } + state->attached = 1; + ret = libusb_claim_interface(state->handle, 0); + if (ret) { + printf("cannot claim interface: %s\n", + libusb_error_name(ret)); + goto error4; + } + } + + return 0; + +error4: + if (state->attached == 1) + libusb_attach_kernel_driver(state->handle, 0); + +error3: + libusb_close(state->handle); + +error2: + libusb_free_device_list(list, 1); + +error1: + libusb_exit(state->ctx); + return 1; +} + +/* + * test_exit - cleanup test program + */ + +void test_exit(struct test_state *state) +{ + libusb_release_interface(state->handle, 0); + if (state->attached == 1) + libusb_attach_kernel_driver(state->handle, 0); + libusb_close(state->handle); + libusb_exit(state->ctx); +} + +int main(void) +{ + struct test_state state; + + if (test_init(&state)) + return 1; + + while (1) { + static unsigned char buffer[BUF_LEN]; + int bytes; + libusb_bulk_transfer(state.handle, EP_BULK_IN, buffer, BUF_LEN, + &bytes, 500); + libusb_bulk_transfer(state.handle, EP_BULK_OUT, buffer, BUF_LEN, + &bytes, 500); + } + test_exit(&state); +} From 411dd19c682dd9c1c29a722bde2d172ee72707de Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 2 May 2014 13:41:00 +0530 Subject: [PATCH 099/314] usb: musb: Kconfig: Select the DMA driver if DMA mode of MUSB is enabled AM335x MUSB supports both PIO and DMA mode. When DMA mode is selected users need to explicitly enable the DMA driver. To avoid the extra configuration select the DMA driver if DMA mode is set for AM335x MUSB. Signed-off-by: George Cherian Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 8b789792f6fa..6b2a4b8b82ca 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -141,6 +141,7 @@ config USB_TI_CPPI_DMA config USB_TI_CPPI41_DMA bool 'TI CPPI 4.1 (AM335x)' depends on ARCH_OMAP + select TI_CPPI41 config USB_TUSB_OMAP_DMA bool 'TUSB 6010' From 22a825079a75560e01fa3307229713ff29cc7aa2 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 4 May 2014 10:57:30 +0200 Subject: [PATCH 100/314] usb: musb: tusb: remove dead code musb_in_tusb() is always set to 0, because CONFIG_USB_TUSB6010 is never set (it should have been CONFIG_USB_MUSB_TUSB6010). But musb_in_tusb() is unused anyway, so remove a few lines of dead code. Signed-off-by: Paul Bolle Signed-off-by: Felipe Balbi --- drivers/usb/musb/tusb6010.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index 35c933a5d991..1864e24ac965 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -14,12 +14,6 @@ extern u8 tusb_get_revision(struct musb *musb); -#ifdef CONFIG_USB_TUSB6010 -#define musb_in_tusb() 1 -#else -#define musb_in_tusb() 0 -#endif - #ifdef CONFIG_USB_TUSB_OMAP_DMA #define tusb_dma_omap() 1 #else From 4d9f872ced245ef0c712f0f04adf446d37813c57 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 5 May 2014 07:39:34 +0800 Subject: [PATCH 101/314] usb: gadget: configfs: fix typo %s/atleast/at least Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index dcead559a61e..b5e965ec8b61 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -793,7 +793,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget, ret = -EINVAL; if (list_empty(&gi->cdev.configs)) { - pr_err("Need atleast one configuration in %s.\n", + pr_err("Need at least one configuration in %s.\n", gi->composite.name); goto err_comp_cleanup; } @@ -804,7 +804,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget, cfg = container_of(c, struct config_usb_cfg, c); if (list_empty(&cfg->func_list)) { - pr_err("Config %s/%d of %s needs atleast one function.\n", + pr_err("Config %s/%d of %s needs at least one function.\n", c->label, c->bConfigurationValue, gi->composite.name); goto err_comp_cleanup; From bcdbc084ebab447f6eb1add7b953f125b0c8174b Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 6 May 2014 17:16:07 +0200 Subject: [PATCH 102/314] usb: gadget: atmel_usba: always test udc->driver Found using smatch: drivers/usb/gadget/atmel_usba_udc.c:1689 usba_udc_irq() error: we previously assumed 'udc->driver' could be null (see line 1636) Always test udc->driver before using its members. Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni Signed-off-by: Felipe Balbi --- drivers/usb/gadget/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9f65324f9ae0..76023ce449a3 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1686,7 +1686,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) reset_all_endpoints(udc); if (udc->gadget.speed != USB_SPEED_UNKNOWN - && udc->driver->disconnect) { + && udc->driver && udc->driver->disconnect) { udc->gadget.speed = USB_SPEED_UNKNOWN; spin_unlock(&udc->lock); udc->driver->disconnect(&udc->gadget); From d48d41f18a762c765df87d14b554485e52c393cd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:41:16 +0900 Subject: [PATCH 103/314] usb: gadget: f_uac2: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_uac2.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index bc23040c7790..c024d27fcce2 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -974,8 +974,6 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL); if (!prm->rbuf) { prm->max_psize = 0; - dev_err(&uac2->pdev.dev, - "%s:%d Error!\n", __func__, __LINE__); goto err; } @@ -984,8 +982,6 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL); if (!prm->rbuf) { prm->max_psize = 0; - dev_err(&uac2->pdev.dev, - "%s:%d Error!\n", __func__, __LINE__); goto err; } @@ -1298,10 +1294,8 @@ static int audio_bind_config(struct usb_configuration *cfg) int res; agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL); - if (agdev_g == NULL) { - printk(KERN_ERR "Unable to allocate audio gadget\n"); + if (agdev_g == NULL) return -ENOMEM; - } res = usb_string_ids_tab(cfg->cdev, strings_fn); if (res) From 0351c329f72a41ca712310587d3f7ca82fd8015f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:42:21 +0900 Subject: [PATCH 104/314] usb: gadget: fotg210-udc: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fotg210-udc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c index 2d0305280e8c..e143d69f6017 100644 --- a/drivers/usb/gadget/fotg210-udc.c +++ b/drivers/usb/gadget/fotg210-udc.c @@ -1112,17 +1112,13 @@ static int fotg210_udc_probe(struct platform_device *pdev) /* initialize udc */ fotg210 = kzalloc(sizeof(struct fotg210_udc), GFP_KERNEL); - if (fotg210 == NULL) { - pr_err("kzalloc error\n"); + if (fotg210 == NULL) goto err_alloc; - } for (i = 0; i < FOTG210_MAX_NUM_EP; i++) { _ep[i] = kzalloc(sizeof(struct fotg210_ep), GFP_KERNEL); - if (_ep[i] == NULL) { - pr_err("_ep kzalloc error\n"); + if (_ep[i] == NULL) goto err_alloc; - } fotg210->ep[i] = _ep[i]; } From 8a67ab7d1d2d267ffad3e22b5e4e4d46230e925a Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:43:57 +0900 Subject: [PATCH 105/314] usb: gadget: fsl_udc_core: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_udc_core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 15960af0f67e..68843f081377 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2252,10 +2252,8 @@ static int __init struct_udc_setup(struct fsl_udc *udc, udc->phy_mode = pdata->phy_mode; udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL); - if (!udc->eps) { - ERR("malloc fsl_ep failed\n"); + if (!udc->eps) return -1; - } /* initialized QHs, take care of alignment */ size = udc->max_ep * sizeof(struct ep_queue_head); @@ -2338,10 +2336,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev) u32 dccparams; udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); - if (udc_controller == NULL) { - ERR("malloc udc failed\n"); + if (udc_controller == NULL) return -ENOMEM; - } pdata = dev_get_platdata(&pdev->dev); udc_controller->pdata = pdata; From 8a24bb403974760b420777a76637b2e9f87ffa3f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:44:59 +0900 Subject: [PATCH 106/314] usb: gadget: fusb300_udc: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fusb300_udc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 6423f1840ed9..3deb4e938071 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -1400,17 +1400,13 @@ static int __init fusb300_probe(struct platform_device *pdev) /* initialize udc */ fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); - if (fusb300 == NULL) { - pr_err("kzalloc error\n"); + if (fusb300 == NULL) goto clean_up; - } for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); - if (_ep[i] == NULL) { - pr_err("_ep kzalloc error\n"); + if (_ep[i] == NULL) goto clean_up; - } fusb300->ep[i] = _ep[i]; } From c797f7fd5c64c8947900be03f0cd229879a708e6 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:46:23 +0900 Subject: [PATCH 107/314] usb: gadget: m66592-udc: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/m66592-udc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 8cae01d88597..0d17174b86f8 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1594,7 +1594,6 @@ static int __init m66592_probe(struct platform_device *pdev) m66592 = kzalloc(sizeof(struct m66592), GFP_KERNEL); if (m66592 == NULL) { ret = -ENOMEM; - pr_err("kzalloc error\n"); goto clean_up; } From f3772c2b4974241a0ee9d2a35b626fff7c2b7b8d Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:48:13 +0900 Subject: [PATCH 108/314] usb: gadget: mv_u3d_core: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/mv_u3d_core.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c index d2ca59e7b477..16248711c152 100644 --- a/drivers/usb/gadget/mv_u3d_core.c +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -297,10 +297,8 @@ static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req, u3d = req->ep->u3d; trb = kzalloc(sizeof(*trb), GFP_ATOMIC); - if (!trb) { - dev_err(u3d->dev, "%s, trb alloc fail\n", __func__); + if (!trb) return NULL; - } /* * Be careful that no _GFP_HIGHMEM is set, @@ -446,17 +444,12 @@ static int mv_u3d_req_to_trb(struct mv_u3d_req *req) trb_num++; trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC); - if (!trb) { - dev_err(u3d->dev, - "%s, trb alloc fail\n", __func__); + if (!trb) return -ENOMEM; - } trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC); if (!trb_hw) { kfree(trb); - dev_err(u3d->dev, - "%s, trb_hw alloc fail\n", __func__); return -ENOMEM; } @@ -1811,7 +1804,6 @@ static int mv_u3d_probe(struct platform_device *dev) u3d = kzalloc(sizeof(*u3d), GFP_KERNEL); if (!u3d) { - dev_err(&dev->dev, "failed to allocate memory for u3d\n"); retval = -ENOMEM; goto err_alloc_private; } @@ -1905,7 +1897,6 @@ static int mv_u3d_probe(struct platform_device *dev) size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2; u3d->eps = kzalloc(size, GFP_KERNEL); if (!u3d->eps) { - dev_err(&dev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; goto err_alloc_eps; } @@ -1913,7 +1904,6 @@ static int mv_u3d_probe(struct platform_device *dev) /* initialize ep0 status request structure */ u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL); if (!u3d->status_req) { - dev_err(&dev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; goto err_alloc_status_req; } From e5f06f909fd3a6901814da79e1ebb8a04887c889 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:49:10 +0900 Subject: [PATCH 109/314] usb: gadget: r8a66597-udc: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/r8a66597-udc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index aff0a6718bc6..b698a490cc7d 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1904,7 +1904,6 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL); if (r8a66597 == NULL) { ret = -ENOMEM; - dev_err(&pdev->dev, "kzalloc error\n"); goto clean_up; } From f06d186dbd294e9d436096747f34918b70b4f8f1 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 7 May 2014 15:50:27 +0900 Subject: [PATCH 110/314] usb: gadget: tcm_usb_gadget: remove unnecessary OOM messages The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han Signed-off-by: Felipe Balbi --- drivers/usb/gadget/tcm_usb_gadget.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index f058c0368d61..49481e0a3382 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -1383,10 +1383,8 @@ static struct se_node_acl *usbg_alloc_fabric_acl(struct se_portal_group *se_tpg) struct usbg_nacl *nacl; nacl = kzalloc(sizeof(struct usbg_nacl), GFP_KERNEL); - if (!nacl) { - printk(KERN_ERR "Unable to allocate struct usbg_nacl\n"); + if (!nacl) return NULL; - } return &nacl->se_node_acl; } @@ -1561,10 +1559,8 @@ static struct se_portal_group *usbg_make_tpg( } tpg = kzalloc(sizeof(struct usbg_tpg), GFP_KERNEL); - if (!tpg) { - printk(KERN_ERR "Unable to allocate struct usbg_tpg"); + if (!tpg) return ERR_PTR(-ENOMEM); - } mutex_init(&tpg->tpg_mutex); atomic_set(&tpg->tpg_port_count, 0); tpg->workqueue = alloc_workqueue("tcm_usb_gadget", 0, 1); @@ -1613,10 +1609,8 @@ static struct se_wwn *usbg_make_tport( return ERR_PTR(-EINVAL); tport = kzalloc(sizeof(struct usbg_tport), GFP_KERNEL); - if (!(tport)) { - printk(KERN_ERR "Unable to allocate struct usbg_tport"); + if (!(tport)) return ERR_PTR(-ENOMEM); - } tport->tport_wwpn = wwpn; snprintf(tport->tport_name, sizeof(tport->tport_name), "%s", wnn_name); return &tport->tport_wwn; @@ -1727,10 +1721,8 @@ static int tcm_usbg_make_nexus(struct usbg_tpg *tpg, char *name) ret = -ENOMEM; tv_nexus = kzalloc(sizeof(*tv_nexus), GFP_KERNEL); - if (!tv_nexus) { - pr_err("Unable to allocate struct tcm_vhost_nexus\n"); + if (!tv_nexus) goto err_unlock; - } tv_nexus->tvn_se_sess = transport_init_session(TARGET_PROT_NORMAL); if (IS_ERR(tv_nexus->tvn_se_sess)) goto err_free; From 966036fde60e6d96708815e0d495692ac352acf9 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 8 May 2014 00:26:52 +0400 Subject: [PATCH 111/314] usb: gadget: gr_udc: unconditionally use GFP_ATOMIC in gr_queue_ext() As far as gr_queue() is called with spinlock held, we have to pass GFP_ATOMIC regardless of gfp argument. Found by Linux Driver Verification project (linuxtesting.org). Acked-by: Andreas Larsson Signed-off-by: Alexey Khoroshilov Signed-off-by: Felipe Balbi --- drivers/usb/gadget/gr_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 4966971d6978..99a37ed03e27 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -1684,7 +1684,7 @@ static int gr_queue_ext(struct usb_ep *_ep, struct usb_request *_req, if (ep->is_in) gr_dbgprint_request("EXTERN", ep, req); - ret = gr_queue(ep, req, gfp_flags); + ret = gr_queue(ep, req, GFP_ATOMIC); spin_unlock(&ep->dev->lock); From 64890edb8536618ee856fbca699fe930fcef1573 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 15:52:14 +0200 Subject: [PATCH 112/314] usb: gadget: s3c2410_udc: don't use pr_debug return value pr_debug() may be defined as "do { } while (0)" in some configurations, which means one cannot rely on the return value to be available. In the dprintk function in this driver, we can work around the resulting build error trivially by returning the length that this function already knows and ignoring the return value of pr_debug. Signed-off-by: Arnd Bergmann Cc: Ben Dooks Cc: Kukjin Kim Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c2410_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index dd9678f85c58..7987aa049fab 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -117,7 +117,8 @@ static int dprintk(int level, const char *fmt, ...) sizeof(printk_buf)-len, fmt, args); va_end(args); - return pr_debug("%s", printk_buf); + pr_debug("%s", printk_buf); + return len; } #else static int dprintk(int level, const char *fmt, ...) From 70c1ff4b3c865a36f00aa2498eab3eadd818e4ab Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 15:52:15 +0200 Subject: [PATCH 113/314] usb: musb: tusb-dma can't be built-in if tusb is not A configuration with CONFIG_USB_MUSB_HDRC=y, CONFIG_USB_TUSB_OMAP_DMA=y and CONFIG_USB_MUSB_TUSB6010=m causes a link failure because of the dependency on the tusb_get_revision symbol: (.text+0x154ce8): undefined reference to `tusb_get_revision' This patch ensures that either MUSB_HDRC and MUSB_TUSB6010 are both modules or both built-in, which are the valid configurations. Signed-off-by: Arnd Bergmann Cc: linux-omap@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 6b2a4b8b82ca..e0fba7591dea 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -145,7 +145,7 @@ config USB_TI_CPPI41_DMA config USB_TUSB_OMAP_DMA bool 'TUSB 6010' - depends on USB_MUSB_TUSB6010 + depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules depends on ARCH_OMAP help Enable DMA transfers on TUSB 6010 when OMAP DMA is available. From a8d191c8bb2f11a8f381e7cb98f978b7288c1401 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 15:52:16 +0200 Subject: [PATCH 114/314] usb: musb: omap2plus bus glue needs USB host support The musb/omap2430.c bus glue driver calls usb_hcd_poll_rh_status, which is only available if CONFIG_USB is also set, i.e. we are building USB host mode and not just endpoint mode. Signed-off-by: Arnd Bergmann Cc: linux-omap@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index e0fba7591dea..06cc5d6ea681 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -76,7 +76,7 @@ config USB_MUSB_TUSB6010 config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS && USB select GENERIC_PHY config USB_MUSB_AM35X From c5ab571f81905568a59dce306df0181f33e00932 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 13 May 2014 21:46:52 +0200 Subject: [PATCH 115/314] usb: phy: msm: reset controller is mandatory now Commit a27345434134 "usb: phy: msm: Use reset framework for LINK and PHY resets" introduced a mandatory call to reset_control_get into the msm usb phy driver, which means we have to add a Kconfig dependency on the API to avoid this build error: phy/phy-msm-usb.c: In function 'msm_otg_read_dt': phy/phy-msm-usb.c:1461:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); ^ Since the usb-ehci-msm driver currently selects the OTG driver, we could still get a broken dependency here. To solve that, this patch also removes the 'select', which turns out to be unnecessary. Reviewed-by: Ivan T. Ivanov Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/host/Kconfig | 1 - drivers/usb/phy/Kconfig | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3d9e54062d62..7a39ae86d5ce 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -170,7 +170,6 @@ config USB_EHCI_MSM tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" depends on ARCH_MSM select USB_EHCI_ROOT_HUB_TT - select USB_MSM_OTG ---help--- Enables support for the USB Host controller present on the Qualcomm chipsets. Root Hub has inbuilt TT. diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index fbbced80b68d..ec531a48d240 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -173,6 +173,7 @@ config USB_ISP1301 config USB_MSM_OTG tristate "Qualcomm on-chip USB OTG controller support" depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST) + depends on RESET_CONTROLLER select USB_PHY help Enable this to support the USB OTG transceiver on Qualcomm chips. It From 10f0577aa5cb03c81cf6ddc2ff7de1b6d6152d0b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 14 May 2014 16:54:47 +0300 Subject: [PATCH 116/314] usb: phy: msm: change devm_ioremap() to devm_ioremap_resource() There are several issues here: 1) platform_get_resource() can return NULL and that wasn't handled. 2) We should request the memory before we remap it, and devm_ioremap_resource() does that. 3) devm_ioremap() returns a NULL but we were checking for IS_ERR(). Fixes: 6b99c68ec1f9 ('usb: phy: msm: Migrate to Managed Device Resource allocation') Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index c522c4ff8084..4f88174aede5 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1586,7 +1586,7 @@ static int msm_otg_probe(struct platform_device *pdev) np ? "alt_core" : "usb_hs_core_clk"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + motg->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(motg->regs)) return PTR_ERR(motg->regs); From 74d484669784836c83f23f80ee21a44e9fbf4d59 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:21 +0200 Subject: [PATCH 117/314] usb: gadget: FunctionFS: share VLA macros with all usb gadget files Variable Length Array macros allow portable (compilable with both gcc and clang) way of allocating a number of structures using a single memory chunk. They can be useful for files other than f_fs.c, so move them to a header file. Signed-off-by: Andrzej Pietrasiewicz Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 27 +-------------------------- drivers/usb/gadget/u_f.h | 26 ++++++++++++++++++++++++++ 2 files changed, 27 insertions(+), 26 deletions(-) diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index a01b3bd8fa00..38641ea820a8 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -33,36 +33,11 @@ #include #include "u_fs.h" +#include "u_f.h" #include "configfs.h" #define FUNCTIONFS_MAGIC 0xa647361 /* Chosen by a honest dice roll ;) */ -/* Variable Length Array Macros **********************************************/ -#define vla_group(groupname) size_t groupname##__next = 0 -#define vla_group_size(groupname) groupname##__next - -#define vla_item(groupname, type, name, n) \ - size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = (n) * sizeof(type); \ - groupname##__next = offset + size; \ - offset; \ - }) - -#define vla_item_with_sz(groupname, type, name, n) \ - size_t groupname##_##name##__sz = (n) * sizeof(type); \ - size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = groupname##_##name##__sz; \ - groupname##__next = offset + size; \ - offset; \ - }) - -#define vla_ptr(ptr, groupname, name) \ - ((void *) ((char *)ptr + groupname##_##name##__offset)) - /* Reference counter handling */ static void ffs_data_get(struct ffs_data *ffs); static void ffs_data_put(struct ffs_data *ffs); diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h index 71034c061fca..1d5f0eb68552 100644 --- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -16,6 +16,32 @@ #ifndef __U_F_H__ #define __U_F_H__ +/* Variable Length Array Macros **********************************************/ +#define vla_group(groupname) size_t groupname##__next = 0 +#define vla_group_size(groupname) groupname##__next + +#define vla_item(groupname, type, name, n) \ + size_t groupname##_##name##__offset = ({ \ + size_t align_mask = __alignof__(type) - 1; \ + size_t offset = (groupname##__next + align_mask) & ~align_mask;\ + size_t size = (n) * sizeof(type); \ + groupname##__next = offset + size; \ + offset; \ + }) + +#define vla_item_with_sz(groupname, type, name, n) \ + size_t groupname##_##name##__sz = (n) * sizeof(type); \ + size_t groupname##_##name##__offset = ({ \ + size_t align_mask = __alignof__(type) - 1; \ + size_t offset = (groupname##__next + align_mask) & ~align_mask;\ + size_t size = groupname##_##name##__sz; \ + groupname##__next = offset + size; \ + offset; \ + }) + +#define vla_ptr(ptr, groupname, name) \ + ((void *) ((char *)ptr + groupname##_##name##__offset)) + struct usb_ep; struct usb_request; From 19824d5eeecedfb46639961da1b7a21ba3179930 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:22 +0200 Subject: [PATCH 118/314] usb: gadget: OS String support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a custom (non-USB IF) extension to the USB standard: http://msdn.microsoft.com/library/windows/hardware/gg463182 They grant permission to use the specification - there is "Microsoft OS Descriptor Specification License Agreement" under the link mentioned above, and its Section 2 "Grant of License", letter (b) reads: "Patent license. Microsoft hereby grants to You a nonexclusive, royalty-free, nontransferable, worldwide license under Microsoft’s patents embodied solely within the Specification and that are owned or licensable by Microsoft to make, use, import, offer to sell, sell and distribute directly or indirectly to Your Licensees Your Implementation. You may sublicense this patent license to Your Licensees under the same terms and conditions." The said extension is maintained by Microsoft for Microsoft. Yet it is fairly common for various devices to use it, and a popular proprietary operating system expects devices to provide "OS descriptors", so Linux-based USB gadgets whishing to be able to talk to a variety of operating systems should be able to provide the "OS descriptors". This patch adds optional support for gadgets whishing to expose the so called "OS String" under index 0xEE of language 0. The contents of the string is generated based on the qw_sign array and b_vendor_code. Interested gadgets need to set the cdev->use_os_string flag, fill cdev->qw_sign with appropriate values and fill cdev->b_vendor_code with a value of their choice. This patch does not however implement responding to any vendor-specific USB requests. Signed-off-by: Andrzej Pietrasiewicz Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 29 +++++++++++++++++++++++++++++ include/linux/usb/composite.h | 11 +++++++++++ 2 files changed, 40 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 8060de6562cd..2f87b1697bf5 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -21,6 +21,22 @@ #include #include +/** + * struct usb_os_string - represents OS String to be reported by a gadget + * @bLength: total length of the entire descritor, always 0x12 + * @bDescriptorType: USB_DT_STRING + * @qwSignature: the OS String proper + * @bMS_VendorCode: code used by the host for subsequent requests + * @bPad: not used, must be zero + */ +struct usb_os_string { + __u8 bLength; + __u8 bDescriptorType; + __u8 qwSignature[OS_STRING_QW_SIGN_LEN]; + __u8 bMS_VendorCode; + __u8 bPad; +} __packed; + /* * The code in this file is utility code, used to build a gadget driver * from one or more "function" drivers, one or more "configuration" @@ -961,6 +977,19 @@ static int get_string(struct usb_composite_dev *cdev, return s->bLength; } + if (cdev->use_os_string && language == 0 && id == OS_STRING_IDX) { + struct usb_os_string *b = buf; + b->bLength = sizeof(*b); + b->bDescriptorType = USB_DT_STRING; + compiletime_assert( + sizeof(b->qwSignature) == sizeof(cdev->qw_sign), + "qwSignature size must be equal to qw_sign"); + memcpy(&b->qwSignature, cdev->qw_sign, sizeof(b->qwSignature)); + b->bMS_VendorCode = cdev->b_vendor_code; + b->bPad = 0; + return sizeof(*b); + } + list_for_each_entry(uc, &cdev->gstrings, list) { struct usb_gadget_strings **sp; diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index d3ca3b53837c..7d29ee9363e8 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -335,11 +335,17 @@ static inline struct usb_composite_driver *to_cdriver( return container_of(gdrv, struct usb_composite_driver, gadget_driver); } +#define OS_STRING_QW_SIGN_LEN 14 +#define OS_STRING_IDX 0xEE + /** * struct usb_composite_device - represents one composite usb gadget * @gadget: read-only, abstracts the gadget's usb peripheral controller * @req: used for control responses; buffer is pre-allocated * @config: the currently active configuration + * @qw_sign: qwSignature part of the OS string + * @b_vendor_code: bMS_VendorCode part of the OS string + * @use_os_string: false by default, interested gadgets set it * * One of these devices is allocated and initialized before the * associated device driver's bind() is called. @@ -372,6 +378,11 @@ struct usb_composite_dev { struct usb_configuration *config; + /* OS String is a custom (yet popular) extension to the USB standard. */ + u8 qw_sign[OS_STRING_QW_SIGN_LEN]; + u8 b_vendor_code; + unsigned int use_os_string:1; + /* private: */ /* internals */ unsigned int suspended:1; From 37a3a533429ef9b3cc9f15a656c19623f0e88df7 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:23 +0200 Subject: [PATCH 119/314] usb: gadget: OS Feature Descriptors support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a custom (non-USB IF) extension to the USB standard: http://msdn.microsoft.com/library/windows/hardware/gg463182 They grant permission to use the specification - there is "Microsoft OS Descriptor Specification License Agreement" under the link mentioned above, and its Section 2 "Grant of License", letter (b) reads: "Patent license. Microsoft hereby grants to You a nonexclusive, royalty-free, nontransferable, worldwide license under Microsoft’s patents embodied solely within the Specification and that are owned or licensable by Microsoft to make, use, import, offer to sell, sell and distribute directly or indirectly to Your Licensees Your Implementation. You may sublicense this patent license to Your Licensees under the same terms and conditions." The said extension is maintained by Microsoft for Microsoft. Yet it is fairly common for various devices to use it, and a popular proprietary operating system expects devices to provide "OS descriptors", so Linux-based USB gadgets whishing to be able to talk to a variety of operating systems should be able to provide the "OS descriptors". This patch adds optional support for gadgets whishing to expose the so called "OS Feature Descriptors", that is "Extended Compatibility ID" and "Extended Properties". Hosts which do request "OS descriptors" from gadgets do so during the enumeration phase and before the configuration is set with SET_CONFIGURATION. What is more, those hosts never ask for configurations at indices other than 0. Therefore, gadgets whishing to provide "OS descriptors" must designate one configuration to be used with this kind of hosts - this is what os_desc_config is added for in struct usb_composite_dev. There is an additional advantage to it: if a gadget provides "OS descriptors" and designates one configuration to be used with such non-USB-compliant hosts it can invoke "usb_add_config" in any order because the designated configuration will be reported to be at index 0 anyway. This patch also adds handling vendor-specific requests addressed at device or interface and related to handling "OS descriptors". Signed-off-by: Andrzej Pietrasiewicz Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 288 ++++++++++++++++++++++++++++++++- drivers/usb/gadget/u_os_desc.h | 90 +++++++++++ include/linux/usb/composite.h | 58 +++++++ 3 files changed, 435 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/gadget/u_os_desc.h diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 2f87b1697bf5..042c66b71df8 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -21,6 +21,8 @@ #include #include +#include "u_os_desc.h" + /** * struct usb_os_string - represents OS String to be reported by a gadget * @bLength: total length of the entire descritor, always 0x12 @@ -438,6 +440,7 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) { struct usb_gadget *gadget = cdev->gadget; struct usb_configuration *c; + struct list_head *pos; u8 type = w_value >> 8; enum usb_device_speed speed = USB_SPEED_UNKNOWN; @@ -456,7 +459,20 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) /* This is a lookup by config *INDEX* */ w_value &= 0xff; - list_for_each_entry(c, &cdev->configs, list) { + + pos = &cdev->configs; + c = cdev->os_desc_config; + if (c) + goto check_config; + + while ((pos = pos->next) != &cdev->configs) { + c = list_entry(pos, typeof(*c), list); + + /* skip OS Descriptors config which is handled separately */ + if (c == cdev->os_desc_config) + continue; + +check_config: /* ignore configs that won't work at this speed */ switch (speed) { case USB_SPEED_SUPER: @@ -1236,6 +1252,158 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) req->status, req->actual, req->length); } +static int count_ext_compat(struct usb_configuration *c) +{ + int i, res; + + res = 0; + for (i = 0; i < c->next_interface_id; ++i) { + struct usb_function *f; + int j; + + f = c->interface[i]; + for (j = 0; j < f->os_desc_n; ++j) { + struct usb_os_desc *d; + + if (i != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d && d->ext_compat_id) + ++res; + } + } + BUG_ON(res > 255); + return res; +} + +static void fill_ext_compat(struct usb_configuration *c, u8 *buf) +{ + int i, count; + + count = 16; + for (i = 0; i < c->next_interface_id; ++i) { + struct usb_function *f; + int j; + + f = c->interface[i]; + for (j = 0; j < f->os_desc_n; ++j) { + struct usb_os_desc *d; + + if (i != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d && d->ext_compat_id) { + *buf++ = i; + *buf++ = 0x01; + memcpy(buf, d->ext_compat_id, 16); + buf += 22; + } else { + ++buf; + *buf = 0x01; + buf += 23; + } + count += 24; + if (count >= 4096) + return; + } + } +} + +static int count_ext_prop(struct usb_configuration *c, int interface) +{ + struct usb_function *f; + int j, res; + + res = 0; + + f = c->interface[interface]; + for (j = 0; j < f->os_desc_n; ++j) { + struct usb_os_desc *d; + + if (interface != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d && d->ext_compat_id) + return d->ext_prop_count; + } + return res; +} + +static int len_ext_prop(struct usb_configuration *c, int interface) +{ + struct usb_function *f; + struct usb_os_desc *d; + int j, res; + + res = 10; /* header length */ + f = c->interface[interface]; + for (j = 0; j < f->os_desc_n; ++j) { + if (interface != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d) + return min(res + d->ext_prop_len, 4096); + } + return res; +} + +static int fill_ext_prop(struct usb_configuration *c, int interface, u8 *buf) +{ + struct usb_function *f; + struct usb_os_desc *d; + struct usb_os_desc_ext_prop *ext_prop; + int j, count, n, ret; + u8 *start = buf; + + f = c->interface[interface]; + for (j = 0; j < f->os_desc_n; ++j) { + if (interface != f->os_desc_table[j].if_id) + continue; + d = f->os_desc_table[j].os_desc; + if (d) + list_for_each_entry(ext_prop, &d->ext_prop, entry) { + /* 4kB minus header length */ + n = buf - start; + if (n >= 4086) + return 0; + + count = ext_prop->data_len + + ext_prop->name_len + 14; + if (count > 4086 - n) + return -EINVAL; + usb_ext_prop_put_size(buf, count); + usb_ext_prop_put_type(buf, ext_prop->type); + ret = usb_ext_prop_put_name(buf, ext_prop->name, + ext_prop->name_len); + if (ret < 0) + return ret; + switch (ext_prop->type) { + case USB_EXT_PROP_UNICODE: + case USB_EXT_PROP_UNICODE_ENV: + case USB_EXT_PROP_UNICODE_LINK: + usb_ext_prop_put_unicode(buf, ret, + ext_prop->data, + ext_prop->data_len); + break; + case USB_EXT_PROP_BINARY: + usb_ext_prop_put_binary(buf, ret, + ext_prop->data, + ext_prop->data_len); + break; + case USB_EXT_PROP_LE32: + /* not implemented */ + case USB_EXT_PROP_BE32: + /* not implemented */ + default: + return -EINVAL; + } + buf += count; + } + } + + return 0; +} + /* * The setup() callback implements all the ep0 functionality that's * not handled lower down, in hardware or the hardware driver(like @@ -1445,6 +1613,91 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) break; default: unknown: + /* + * OS descriptors handling + */ + if (cdev->use_os_string && cdev->os_desc_config && + (ctrl->bRequest & USB_TYPE_VENDOR) && + ctrl->bRequest == cdev->b_vendor_code) { + struct usb_request *req; + struct usb_configuration *os_desc_cfg; + u8 *buf; + int interface; + int count = 0; + + req = cdev->os_desc_req; + req->complete = composite_setup_complete; + buf = req->buf; + os_desc_cfg = cdev->os_desc_config; + memset(buf, 0, w_length); + buf[5] = 0x01; + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + if (w_index != 0x4 || (w_value >> 8)) + break; + buf[6] = w_index; + if (w_length == 0x10) { + /* Number of ext compat interfaces */ + count = count_ext_compat(os_desc_cfg); + buf[8] = count; + count *= 24; /* 24 B/ext compat desc */ + count += 16; /* header */ + put_unaligned_le32(count, buf); + value = w_length; + } else { + /* "extended compatibility ID"s */ + count = count_ext_compat(os_desc_cfg); + buf[8] = count; + count *= 24; /* 24 B/ext compat desc */ + count += 16; /* header */ + put_unaligned_le32(count, buf); + buf += 16; + fill_ext_compat(os_desc_cfg, buf); + value = w_length; + } + break; + case USB_RECIP_INTERFACE: + if (w_index != 0x5 || (w_value >> 8)) + break; + interface = w_value & 0xFF; + buf[6] = w_index; + if (w_length == 0x0A) { + count = count_ext_prop(os_desc_cfg, + interface); + put_unaligned_le16(count, buf + 8); + count = len_ext_prop(os_desc_cfg, + interface); + put_unaligned_le32(count, buf); + + value = w_length; + } else { + count = count_ext_prop(os_desc_cfg, + interface); + put_unaligned_le16(count, buf + 8); + count = len_ext_prop(os_desc_cfg, + interface); + put_unaligned_le32(count, buf); + buf += 10; + value = fill_ext_prop(os_desc_cfg, + interface, buf); + if (value < 0) + return value; + + value = w_length; + } + break; + } + req->length = value; + req->zero = value < w_length; + value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG(cdev, "ep_queue --> %d\n", value); + req->status = 0; + composite_setup_complete(gadget->ep0, req); + } + return value; + } + VDBG(cdev, "non-core control req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, @@ -1668,6 +1921,29 @@ fail: return ret; } +int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, + struct usb_ep *ep0) +{ + int ret = 0; + + cdev->os_desc_req = usb_ep_alloc_request(ep0, GFP_KERNEL); + if (!cdev->os_desc_req) { + ret = PTR_ERR(cdev->os_desc_req); + goto end; + } + + /* OS feature descriptor length <= 4kB */ + cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL); + if (!cdev->os_desc_req->buf) { + ret = PTR_ERR(cdev->os_desc_req->buf); + kfree(cdev->os_desc_req); + goto end; + } + cdev->os_desc_req->complete = composite_setup_complete; +end: + return ret; +} + void composite_dev_cleanup(struct usb_composite_dev *cdev) { struct usb_gadget_string_container *uc, *tmp; @@ -1676,6 +1952,10 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev) list_del(&uc->list); kfree(uc); } + if (cdev->os_desc_req) { + kfree(cdev->os_desc_req->buf); + usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req); + } if (cdev->req) { kfree(cdev->req->buf); usb_ep_free_request(cdev->gadget->ep0, cdev->req); @@ -1713,6 +1993,12 @@ static int composite_bind(struct usb_gadget *gadget, if (status < 0) goto fail; + if (cdev->use_os_string) { + status = composite_os_desc_req_prepare(cdev, gadget->ep0); + if (status) + goto fail; + } + update_unchanged_dev_desc(&cdev->desc, composite->dev); /* has userspace failed to provide a serial number? */ diff --git a/drivers/usb/gadget/u_os_desc.h b/drivers/usb/gadget/u_os_desc.h new file mode 100644 index 000000000000..ea5cf8c2da28 --- /dev/null +++ b/drivers/usb/gadget/u_os_desc.h @@ -0,0 +1,90 @@ +/* + * u_os_desc.h + * + * Utility definitions for "OS Descriptors" support + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Andrzej Pietrasiewicz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __U_OS_DESC_H__ +#define __U_OS_DESC_H__ + +#include +#include + +#define USB_EXT_PROP_DW_SIZE 0 +#define USB_EXT_PROP_DW_PROPERTY_DATA_TYPE 4 +#define USB_EXT_PROP_W_PROPERTY_NAME_LENGTH 8 +#define USB_EXT_PROP_B_PROPERTY_NAME 10 +#define USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH 10 +#define USB_EXT_PROP_B_PROPERTY_DATA 14 + +#define USB_EXT_PROP_RESERVED 0 +#define USB_EXT_PROP_UNICODE 1 +#define USB_EXT_PROP_UNICODE_ENV 2 +#define USB_EXT_PROP_BINARY 3 +#define USB_EXT_PROP_LE32 4 +#define USB_EXT_PROP_BE32 5 +#define USB_EXT_PROP_UNICODE_LINK 6 +#define USB_EXT_PROP_UNICODE_MULTI 7 + +static inline void usb_ext_prop_put_size(u8 *buf, int dw_size) +{ + put_unaligned_le32(dw_size, &buf[USB_EXT_PROP_DW_SIZE]); +} + +static inline void usb_ext_prop_put_type(u8 *buf, int type) +{ + put_unaligned_le32(type, &buf[USB_EXT_PROP_DW_PROPERTY_DATA_TYPE]); +} + +static inline int usb_ext_prop_put_name(u8 *buf, const char *name, int pnl) +{ + int result; + + put_unaligned_le16(pnl, &buf[USB_EXT_PROP_W_PROPERTY_NAME_LENGTH]); + result = utf8s_to_utf16s(name, strlen(name), UTF16_LITTLE_ENDIAN, + (wchar_t *) &buf[USB_EXT_PROP_B_PROPERTY_NAME], pnl - 2); + if (result < 0) + return result; + + put_unaligned_le16(0, &buf[USB_EXT_PROP_B_PROPERTY_NAME + pnl]); + + return pnl; +} + +static inline void usb_ext_prop_put_binary(u8 *buf, int pnl, const u8 *data, + int data_len) +{ + put_unaligned_le32(data_len, + &buf[USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH + pnl]); + memcpy(&buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl], data, data_len); +} + +static inline int usb_ext_prop_put_unicode(u8 *buf, int pnl, const char *string, + int data_len) +{ + int result; + put_unaligned_le32(data_len, + &buf[USB_EXT_PROP_DW_PROPERTY_DATA_LENGTH + pnl]); + + result = utf8s_to_utf16s(string, data_len >> 1, UTF16_LITTLE_ENDIAN, + (wchar_t *) &buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl], + data_len - 2); + if (result < 0) + return result; + + put_unaligned_le16(0, + &buf[USB_EXT_PROP_B_PROPERTY_DATA + pnl + data_len]); + + return data_len; +} + +#endif /* __U_OS_DESC_H__ */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 7d29ee9363e8..549f5382b01a 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -56,6 +56,53 @@ #define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1) struct usb_configuration; +/** + * struct usb_os_desc_ext_prop - describes one "Extended Property" + * @entry: used to keep a list of extended properties + * @type: Extended Property type + * @name_len: Extended Property unicode name length, including terminating '\0' + * @name: Extended Property name + * @data_len: Length of Extended Property blob (for unicode store double len) + * @data: Extended Property blob + */ +struct usb_os_desc_ext_prop { + struct list_head entry; + u8 type; + int name_len; + char *name; + int data_len; + char *data; +}; + +/** + * struct usb_os_desc - describes OS descriptors associated with one interface + * @ext_compat_id: 16 bytes of "Compatible ID" and "Subcompatible ID" + * @ext_prop: Extended Properties list + * @ext_prop_len: Total length of Extended Properties blobs + * @ext_prop_count: Number of Extended Properties + */ +struct usb_os_desc { + char *ext_compat_id; + struct list_head ext_prop; + int ext_prop_len; + int ext_prop_count; +}; + +/** + * struct usb_os_desc_table - describes OS descriptors associated with one + * interface of a usb_function + * @if_id: Interface id + * @os_desc: "Extended Compatibility ID" and "Extended Properties" of the + * interface + * + * Each interface can have at most one "Extended Compatibility ID" and a + * number of "Extended Properties". + */ +struct usb_os_desc_table { + int if_id; + struct usb_os_desc *os_desc; +}; + /** * struct usb_function - describes one function of a configuration * @name: For diagnostics, identifies the function. @@ -73,6 +120,10 @@ struct usb_configuration; * be available at super speed. * @config: assigned when @usb_add_function() is called; this is the * configuration with which this function is associated. + * @os_desc_table: Table of (interface id, os descriptors) pairs. The function + * can expose more than one interface. If an interface is a member of + * an IAD, only the first interface of IAD has its entry in the table. + * @os_desc_n: Number of entries in os_desc_table * @bind: Before the gadget can register, all of its functions bind() to the * available resources including string and interface identifiers used * in interface or class descriptors; endpoints; I/O buffers; and so on. @@ -129,6 +180,9 @@ struct usb_function { struct usb_configuration *config; + struct usb_os_desc_table *os_desc_table; + unsigned os_desc_n; + /* REVISIT: bind() functions can be marked __init, which * makes trouble for section mismatch analysis. See if * we can't restructure things to avoid mismatching. @@ -342,10 +396,12 @@ static inline struct usb_composite_driver *to_cdriver( * struct usb_composite_device - represents one composite usb gadget * @gadget: read-only, abstracts the gadget's usb peripheral controller * @req: used for control responses; buffer is pre-allocated + * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated * @config: the currently active configuration * @qw_sign: qwSignature part of the OS string * @b_vendor_code: bMS_VendorCode part of the OS string * @use_os_string: false by default, interested gadgets set it + * @os_desc_config: the configuration to be used with OS descriptors * * One of these devices is allocated and initialized before the * associated device driver's bind() is called. @@ -375,12 +431,14 @@ static inline struct usb_composite_driver *to_cdriver( struct usb_composite_dev { struct usb_gadget *gadget; struct usb_request *req; + struct usb_request *os_desc_req; struct usb_configuration *config; /* OS String is a custom (yet popular) extension to the USB standard. */ u8 qw_sign[OS_STRING_QW_SIGN_LEN]; u8 b_vendor_code; + struct usb_configuration *os_desc_config; unsigned int use_os_string:1; /* private: */ From de7a8d2d534fb3c35c29762b8a7d14e5b1937d6f Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:24 +0200 Subject: [PATCH 120/314] usb: gadget: f_rndis: OS descriptors support In order for usb functions to expose OS descriptors they need to be made aware of OS descriptors. This involves extending the "options" structure and setting up appropriate associations. Signed-off-by: Andrzej Pietrasiewicz Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_rndis.c | 24 +++++++++++++++++++++--- drivers/usb/gadget/u_rndis.h | 3 +++ 2 files changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 139bc9c6f7e0..28d1891f11fa 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -682,6 +682,15 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) rndis_opts = container_of(f->fi, struct f_rndis_opts, func_inst); + if (cdev->use_os_string) { + f->os_desc_table = kzalloc(sizeof(*f->os_desc_table), + GFP_KERNEL); + if (!f->os_desc_table) + return PTR_ERR(f->os_desc_table); + f->os_desc_n = 1; + f->os_desc_table[0].os_desc = &rndis_opts->rndis_os_desc; + } + /* * in drivers/usb/gadget/configfs.c:configfs_composite_bind() * configurations are bound in sequence with list_for_each_entry, @@ -693,14 +702,16 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) gether_set_gadget(rndis_opts->net, cdev->gadget); status = gether_register_netdev(rndis_opts->net); if (status) - return status; + goto fail; rndis_opts->bound = true; } us = usb_gstrings_attach(cdev, rndis_strings, ARRAY_SIZE(rndis_string_defs)); - if (IS_ERR(us)) - return PTR_ERR(us); + if (IS_ERR(us)) { + status = PTR_ERR(us); + goto fail; + } rndis_control_intf.iInterface = us[0].id; rndis_data_intf.iInterface = us[1].id; rndis_iad_descriptor.iFunction = us[2].id; @@ -802,6 +813,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) return 0; fail: + kfree(f->os_desc_table); + f->os_desc_n = 0; usb_free_all_descriptors(f); if (rndis->notify_req) { @@ -892,6 +905,8 @@ static struct usb_function_instance *rndis_alloc_inst(void) opts = kzalloc(sizeof(*opts), GFP_KERNEL); if (!opts) return ERR_PTR(-ENOMEM); + opts->rndis_os_desc.ext_compat_id = opts->rndis_ext_compat_id; + mutex_init(&opts->lock); opts->func_inst.free_func_inst = rndis_free_inst; opts->net = gether_setup_default(); @@ -900,6 +915,7 @@ static struct usb_function_instance *rndis_alloc_inst(void) kfree(opts); return ERR_CAST(net); } + INIT_LIST_HEAD(&opts->rndis_os_desc.ext_prop); config_group_init_type_name(&opts->func_inst.group, "", &rndis_func_type); @@ -925,6 +941,8 @@ static void rndis_unbind(struct usb_configuration *c, struct usb_function *f) { struct f_rndis *rndis = func_to_rndis(f); + kfree(f->os_desc_table); + f->os_desc_n = 0; usb_free_all_descriptors(f); kfree(rndis->notify_req->buf); diff --git a/drivers/usb/gadget/u_rndis.h b/drivers/usb/gadget/u_rndis.h index 7291b15c9dce..e902aa42a297 100644 --- a/drivers/usb/gadget/u_rndis.h +++ b/drivers/usb/gadget/u_rndis.h @@ -26,6 +26,9 @@ struct f_rndis_opts { bool bound; bool borrowed_net; + struct usb_os_desc rndis_os_desc; + char rndis_ext_compat_id[16]; + /* * Read/write access to configfs attributes is handled by configfs. * From 87213d388e927aaa88b21d5ff7e1f75ca2288da1 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:25 +0200 Subject: [PATCH 121/314] usb: gadget: configfs: OS String support Add handling of OS String extension from the configfs interface. A directory "os_desc" is added at the top level of a gadget's directories hierarchy. In the "os_desc" directory there are three attributes: "use", "b_vendor_code" and "qw_sign". If "use" contains "0" the OS string is not reported to the host. "b_vendor_code" contains a one-byte value which is used for custom per-device and per-interface requests. "qw_sign" contains an identifier to be reported as the "OS String" proper. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- Documentation/ABI/testing/configfs-usb-gadget | 11 ++ drivers/usb/gadget/configfs.c | 159 +++++++++++++++++- 2 files changed, 169 insertions(+), 1 deletion(-) diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget index 37559a06393b..0e7b786f24ac 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget +++ b/Documentation/ABI/testing/configfs-usb-gadget @@ -79,3 +79,14 @@ Description: product - gadget's product description manufacturer - gadget's manufacturer description +What: /config/usb-gadget/gadget/os_desc +Date: May 2014 +KernelVersion: 3.16 +Description: + This group contains "OS String" extension handling attributes. + + use - flag turning "OS Desctiptors" support on/off + b_vendor_code - one-byte value used for custom per-device and + per-interface requests + qw_sign - an identifier to be reported as "OS String" + proper diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index b5e965ec8b61..8b9e038ac22b 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -2,6 +2,7 @@ #include #include #include +#include #include #include #include "configfs.h" @@ -43,7 +44,8 @@ struct gadget_info { struct config_group functions_group; struct config_group configs_group; struct config_group strings_group; - struct config_group *default_groups[4]; + struct config_group os_desc_group; + struct config_group *default_groups[5]; struct mutex lock; struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1]; @@ -56,6 +58,9 @@ struct gadget_info { #endif struct usb_composite_driver composite; struct usb_composite_dev cdev; + bool use_os_desc; + char b_vendor_code; + char qw_sign[OS_STRING_QW_SIGN_LEN]; }; struct config_usb_cfg { @@ -79,6 +84,10 @@ struct gadget_strings { struct list_head list; }; +struct os_desc { + struct config_group group; +}; + struct gadget_config_name { struct usb_gadget_strings stringtab_dev; struct usb_string strings; @@ -736,6 +745,145 @@ static void gadget_strings_attr_release(struct config_item *item) USB_CONFIG_STRING_RW_OPS(gadget_strings); USB_CONFIG_STRINGS_LANG(gadget_strings, gadget_info); +static inline struct os_desc *to_os_desc(struct config_item *item) +{ + return container_of(to_config_group(item), struct os_desc, group); +} + +CONFIGFS_ATTR_STRUCT(os_desc); +CONFIGFS_ATTR_OPS(os_desc); + +static ssize_t os_desc_use_show(struct os_desc *os_desc, char *page) +{ + struct gadget_info *gi; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + return sprintf(page, "%d", gi->use_os_desc); +} + +static ssize_t os_desc_use_store(struct os_desc *os_desc, const char *page, + size_t len) +{ + struct gadget_info *gi; + int ret; + bool use; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + mutex_lock(&gi->lock); + ret = strtobool(page, &use); + if (!ret) { + gi->use_os_desc = use; + ret = len; + } + mutex_unlock(&gi->lock); + + return ret; +} + +static struct os_desc_attribute os_desc_use = + __CONFIGFS_ATTR(use, S_IRUGO | S_IWUSR, + os_desc_use_show, + os_desc_use_store); + +static ssize_t os_desc_b_vendor_code_show(struct os_desc *os_desc, char *page) +{ + struct gadget_info *gi; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + return sprintf(page, "%d", gi->b_vendor_code); +} + +static ssize_t os_desc_b_vendor_code_store(struct os_desc *os_desc, + const char *page, size_t len) +{ + struct gadget_info *gi; + int ret; + u8 b_vendor_code; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + mutex_lock(&gi->lock); + ret = kstrtou8(page, 0, &b_vendor_code); + if (!ret) { + gi->b_vendor_code = b_vendor_code; + ret = len; + } + mutex_unlock(&gi->lock); + + return ret; +} + +static struct os_desc_attribute os_desc_b_vendor_code = + __CONFIGFS_ATTR(b_vendor_code, S_IRUGO | S_IWUSR, + os_desc_b_vendor_code_show, + os_desc_b_vendor_code_store); + +static ssize_t os_desc_qw_sign_show(struct os_desc *os_desc, char *page) +{ + struct gadget_info *gi; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + + memcpy(page, gi->qw_sign, OS_STRING_QW_SIGN_LEN); + + return OS_STRING_QW_SIGN_LEN; +} + +static ssize_t os_desc_qw_sign_store(struct os_desc *os_desc, const char *page, + size_t len) +{ + struct gadget_info *gi; + int res, l; + + gi = to_gadget_info(os_desc->group.cg_item.ci_parent); + l = min((int)len, OS_STRING_QW_SIGN_LEN >> 1); + if (page[l - 1] == '\n') + --l; + + mutex_lock(&gi->lock); + res = utf8s_to_utf16s(page, l, + UTF16_LITTLE_ENDIAN, (wchar_t *) gi->qw_sign, + OS_STRING_QW_SIGN_LEN); + if (res > 0) + res = len; + mutex_unlock(&gi->lock); + + return res; +} + +static struct os_desc_attribute os_desc_qw_sign = + __CONFIGFS_ATTR(qw_sign, S_IRUGO | S_IWUSR, + os_desc_qw_sign_show, + os_desc_qw_sign_store); + +static struct configfs_attribute *os_desc_attrs[] = { + &os_desc_use.attr, + &os_desc_b_vendor_code.attr, + &os_desc_qw_sign.attr, + NULL, +}; + +static void os_desc_attr_release(struct config_item *item) +{ + struct os_desc *os_desc = to_os_desc(item); + kfree(os_desc); +} + +static struct configfs_item_operations os_desc_ops = { + .release = os_desc_attr_release, + .show_attribute = os_desc_attr_show, + .store_attribute = os_desc_attr_store, +}; + +static struct config_item_type os_desc_type = { + .ct_item_ops = &os_desc_ops, + .ct_attrs = os_desc_attrs, + .ct_owner = THIS_MODULE, +}; + static int configfs_do_nothing(struct usb_composite_dev *cdev) { WARN_ON(1); @@ -839,6 +987,12 @@ static int configfs_composite_bind(struct usb_gadget *gadget, gi->cdev.desc.iSerialNumber = s[USB_GADGET_SERIAL_IDX].id; } + if (gi->use_os_desc) { + cdev->use_os_string = true; + cdev->b_vendor_code = gi->b_vendor_code; + memcpy(cdev->qw_sign, gi->qw_sign, OS_STRING_QW_SIGN_LEN); + } + /* Go through all configs, attach all functions */ list_for_each_entry(c, &gi->cdev.configs, list) { struct config_usb_cfg *cfg; @@ -929,6 +1083,7 @@ static struct config_group *gadgets_make( gi->group.default_groups[0] = &gi->functions_group; gi->group.default_groups[1] = &gi->configs_group; gi->group.default_groups[2] = &gi->strings_group; + gi->group.default_groups[3] = &gi->os_desc_group; config_group_init_type_name(&gi->functions_group, "functions", &functions_type); @@ -936,6 +1091,8 @@ static struct config_group *gadgets_make( &config_desc_type); config_group_init_type_name(&gi->strings_group, "strings", &gadget_strings_strings_type); + config_group_init_type_name(&gi->os_desc_group, "os_desc", + &os_desc_type); gi->composite.bind = configfs_do_nothing; gi->composite.unbind = configfs_do_nothing; From da4243145fb197622425d4c2feff5d6422f2391e Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:26 +0200 Subject: [PATCH 122/314] usb: gadget: configfs: OS Extended Compatibility descriptors support Add handling of OS Extended Compatibility descriptors from configfs interface. Hosts which expect the "OS Descriptors" ask only for configurations @ index 0, but linux-based USB devices can provide more than one configuration. This patch adds marking one of gadget's configurations the configuration to be reported at index 0, regardless of the actual sequence of usb_add_config invocations used for adding the configurations. The configuration is selected by creating a symbolic link pointing to it from the "os_desc" directory located at the top of a gadget's directory hierarchy. One kind of "OS Descriptors" are "Extended Compatibility Descriptors", which need to be specified per interface. This patch adds interface. directory in function's configfs directory to represent each interface defined by the function. Each interface's directory contains two attributes: "compatible_id" and "sub_compatible_id", which represent 8-byte strings to be reported to the host as the "Compatible ID" and "Sub Compatible ID". Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- Documentation/ABI/testing/configfs-usb-gadget | 13 ++ drivers/usb/gadget/configfs.c | 190 ++++++++++++++++++ drivers/usb/gadget/configfs.h | 12 ++ include/linux/usb/composite.h | 6 + 4 files changed, 221 insertions(+) diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget index 0e7b786f24ac..5c0b3e6eb981 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget +++ b/Documentation/ABI/testing/configfs-usb-gadget @@ -62,6 +62,19 @@ KernelVersion: 3.11 Description: This group contains functions available to this USB gadget. +What: /config/usb-gadget/gadget/functions/./interface. +Date: May 2014 +KernelVersion: 3.16 +Description: + This group contains "Feature Descriptors" specific for one + gadget's USB interface or one interface group described + by an IAD. + + The attributes: + + compatible_id - 8-byte string for "Compatible ID" + sub_compatible_id - 8-byte string for "Sub Compatible ID" + What: /config/usb-gadget/gadget/strings Date: Jun 2013 KernelVersion: 3.11 diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 8b9e038ac22b..fa6cb06cca09 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -6,6 +6,7 @@ #include #include #include "configfs.h" +#include "u_f.h" int check_user_usb_string(const char *name, struct usb_gadget_strings *stringtab_dev) @@ -872,10 +873,63 @@ static void os_desc_attr_release(struct config_item *item) kfree(os_desc); } +static int os_desc_link(struct config_item *os_desc_ci, + struct config_item *usb_cfg_ci) +{ + struct gadget_info *gi = container_of(to_config_group(os_desc_ci), + struct gadget_info, os_desc_group); + struct usb_composite_dev *cdev = &gi->cdev; + struct config_usb_cfg *c_target = + container_of(to_config_group(usb_cfg_ci), + struct config_usb_cfg, group); + struct usb_configuration *c; + int ret; + + mutex_lock(&gi->lock); + list_for_each_entry(c, &cdev->configs, list) { + if (c == &c_target->c) + break; + } + if (c != &c_target->c) { + ret = -EINVAL; + goto out; + } + + if (cdev->os_desc_config) { + ret = -EBUSY; + goto out; + } + + cdev->os_desc_config = &c_target->c; + ret = 0; + +out: + mutex_unlock(&gi->lock); + return ret; +} + +static int os_desc_unlink(struct config_item *os_desc_ci, + struct config_item *usb_cfg_ci) +{ + struct gadget_info *gi = container_of(to_config_group(os_desc_ci), + struct gadget_info, os_desc_group); + struct usb_composite_dev *cdev = &gi->cdev; + + mutex_lock(&gi->lock); + if (gi->udc_name) + unregister_gadget(gi); + cdev->os_desc_config = NULL; + WARN_ON(gi->udc_name); + mutex_unlock(&gi->lock); + return 0; +} + static struct configfs_item_operations os_desc_ops = { .release = os_desc_attr_release, .show_attribute = os_desc_attr_show, .store_attribute = os_desc_attr_store, + .allow_link = os_desc_link, + .drop_link = os_desc_unlink, }; static struct config_item_type os_desc_type = { @@ -884,6 +938,133 @@ static struct config_item_type os_desc_type = { .ct_owner = THIS_MODULE, }; +CONFIGFS_ATTR_STRUCT(usb_os_desc); +CONFIGFS_ATTR_OPS(usb_os_desc); + +static struct configfs_item_operations interf_item_ops = { + .show_attribute = usb_os_desc_attr_show, + .store_attribute = usb_os_desc_attr_store, +}; + +static ssize_t rndis_grp_compatible_id_show(struct usb_os_desc *desc, + char *page) +{ + memcpy(page, desc->ext_compat_id, 8); + return 8; +} + +static ssize_t rndis_grp_compatible_id_store(struct usb_os_desc *desc, + const char *page, size_t len) +{ + int l; + + l = min_t(int, 8, len); + if (page[l - 1] == '\n') + --l; + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + memcpy(desc->ext_compat_id, page, l); + desc->ext_compat_id[l] = '\0'; + + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + + return len; +} + +static struct usb_os_desc_attribute rndis_grp_attr_compatible_id = + __CONFIGFS_ATTR(compatible_id, S_IRUGO | S_IWUSR, + rndis_grp_compatible_id_show, + rndis_grp_compatible_id_store); + +static ssize_t rndis_grp_sub_compatible_id_show(struct usb_os_desc *desc, + char *page) +{ + memcpy(page, desc->ext_compat_id + 8, 8); + return 8; +} + +static ssize_t rndis_grp_sub_compatible_id_store(struct usb_os_desc *desc, + const char *page, size_t len) +{ + int l; + + l = min_t(int, 8, len); + if (page[l - 1] == '\n') + --l; + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + memcpy(desc->ext_compat_id + 8, page, l); + desc->ext_compat_id[l + 8] = '\0'; + + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + + return len; +} + +static struct usb_os_desc_attribute rndis_grp_attr_sub_compatible_id = + __CONFIGFS_ATTR(sub_compatible_id, S_IRUGO | S_IWUSR, + rndis_grp_sub_compatible_id_show, + rndis_grp_sub_compatible_id_store); + +static struct configfs_attribute *interf_grp_attrs[] = { + &rndis_grp_attr_compatible_id.attr, + &rndis_grp_attr_sub_compatible_id.attr, + NULL +}; + +int usb_os_desc_prepare_interf_dir(struct config_group *parent, + int n_interf, + struct usb_os_desc **desc, + struct module *owner) +{ + struct config_group **f_default_groups, *os_desc_group, + **interface_groups; + struct config_item_type *os_desc_type, *interface_type; + + vla_group(data_chunk); + vla_item(data_chunk, struct config_group *, f_default_groups, 2); + vla_item(data_chunk, struct config_group, os_desc_group, 1); + vla_item(data_chunk, struct config_group *, interface_groups, + n_interf + 1); + vla_item(data_chunk, struct config_item_type, os_desc_type, 1); + vla_item(data_chunk, struct config_item_type, interface_type, 1); + + char *vlabuf = kzalloc(vla_group_size(data_chunk), GFP_KERNEL); + if (!vlabuf) + return -ENOMEM; + + f_default_groups = vla_ptr(vlabuf, data_chunk, f_default_groups); + os_desc_group = vla_ptr(vlabuf, data_chunk, os_desc_group); + os_desc_type = vla_ptr(vlabuf, data_chunk, os_desc_type); + interface_groups = vla_ptr(vlabuf, data_chunk, interface_groups); + interface_type = vla_ptr(vlabuf, data_chunk, interface_type); + + parent->default_groups = f_default_groups; + os_desc_type->ct_owner = owner; + config_group_init_type_name(os_desc_group, "os_desc", os_desc_type); + f_default_groups[0] = os_desc_group; + + os_desc_group->default_groups = interface_groups; + interface_type->ct_item_ops = &interf_item_ops; + interface_type->ct_attrs = interf_grp_attrs; + interface_type->ct_owner = owner; + + while (n_interf--) { + struct usb_os_desc *d; + + d = desc[n_interf]; + config_group_init_type_name(&d->group, "", interface_type); + config_item_set_name(&d->group.cg_item, "interface.%d", + n_interf); + interface_groups[n_interf] = &d->group; + } + + return 0; +} +EXPORT_SYMBOL(usb_os_desc_prepare_interf_dir); + static int configfs_do_nothing(struct usb_composite_dev *cdev) { WARN_ON(1); @@ -893,6 +1074,9 @@ static int configfs_do_nothing(struct usb_composite_dev *cdev) int composite_dev_prepare(struct usb_composite_driver *composite, struct usb_composite_dev *dev); +int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, + struct usb_ep *ep0); + static void purge_configs_funcs(struct gadget_info *gi) { struct usb_configuration *c; @@ -1028,6 +1212,12 @@ static int configfs_composite_bind(struct usb_gadget *gadget, } usb_ep_autoconfig_reset(cdev->gadget); } + if (cdev->use_os_string) { + ret = composite_os_desc_req_prepare(cdev, gadget->ep0); + if (ret) + goto err_purge_funcs; + } + usb_ep_autoconfig_reset(cdev->gadget); return 0; diff --git a/drivers/usb/gadget/configfs.h b/drivers/usb/gadget/configfs.h index a7b564a913d1..a14ac792c698 100644 --- a/drivers/usb/gadget/configfs.h +++ b/drivers/usb/gadget/configfs.h @@ -1,6 +1,18 @@ #ifndef USB__GADGET__CONFIGFS__H #define USB__GADGET__CONFIGFS__H +#include + void unregister_gadget_item(struct config_item *item); +int usb_os_desc_prepare_interf_dir(struct config_group *parent, + int n_interf, + struct usb_os_desc **desc, + struct module *owner); + +static inline struct usb_os_desc *to_usb_os_desc(struct config_item *item) +{ + return container_of(to_config_group(item), struct usb_os_desc, group); +} + #endif /* USB__GADGET__CONFIGFS__H */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 549f5382b01a..9c3903d76781 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -80,12 +80,16 @@ struct usb_os_desc_ext_prop { * @ext_prop: Extended Properties list * @ext_prop_len: Total length of Extended Properties blobs * @ext_prop_count: Number of Extended Properties + * @opts_mutex: Optional mutex protecting config data of a usb_function_instance + * @group: Represents OS descriptors associated with an interface in configfs */ struct usb_os_desc { char *ext_compat_id; struct list_head ext_prop; int ext_prop_len; int ext_prop_count; + struct mutex *opts_mutex; + struct config_group group; }; /** @@ -381,6 +385,8 @@ extern void usb_composite_unregister(struct usb_composite_driver *driver); extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); extern int composite_dev_prepare(struct usb_composite_driver *composite, struct usb_composite_dev *cdev); +extern int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, + struct usb_ep *ep0); void composite_dev_cleanup(struct usb_composite_dev *cdev); static inline struct usb_composite_driver *to_cdriver( From a747b0958b5ead2d4ba46dc1f77d46e693a06efa Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:27 +0200 Subject: [PATCH 123/314] usb: gadget: f_rndis: OS Descriptors configfs support Added handling of OS Descriptors support for f_rndis. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_rndis.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 28d1891f11fa..f1bf5763eac4 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -27,6 +27,7 @@ #include "u_ether_configfs.h" #include "u_rndis.h" #include "rndis.h" +#include "configfs.h" /* * This function is an RNDIS Ethernet port -- a Microsoft protocol that's @@ -895,12 +896,15 @@ static void rndis_free_inst(struct usb_function_instance *f) else free_netdev(opts->net); } + + kfree(opts->rndis_os_desc.group.default_groups); /* single VLA chunk */ kfree(opts); } static struct usb_function_instance *rndis_alloc_inst(void) { struct f_rndis_opts *opts; + struct usb_os_desc *descs[1]; opts = kzalloc(sizeof(*opts), GFP_KERNEL); if (!opts) @@ -917,6 +921,9 @@ static struct usb_function_instance *rndis_alloc_inst(void) } INIT_LIST_HEAD(&opts->rndis_os_desc.ext_prop); + descs[0] = &opts->rndis_os_desc; + usb_os_desc_prepare_interf_dir(&opts->func_inst.group, 1, descs, + THIS_MODULE); config_group_init_type_name(&opts->func_inst.group, "", &rndis_func_type); From 7419485f197c436d41535df78ddea1085042d271 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 8 May 2014 14:06:28 +0200 Subject: [PATCH 124/314] usb: gadget: configfs: OS Extended Properties descriptors support Add handling of OS Extended Properties descriptors from configfs interface. One kind of "OS Descriptors" are "Extended Properties" descriptors, which need to be specified per interface or per group of interfaces described by an IAD. This patch adds support for creating subdirectories in interface. directory located in the function's directory. Names of subdirectories created become names of properties. Each property contains two attributes: "type" and "data". The type can be a numeric value 1..7 while data is a blob interpreted depending on the type specified. The types are: 1 - unicode string 2 - unicode string with environment variables 3 - binary 4 - little-endian 32-bit 5 - big-endian 32-bit 6 - unicode string with a symbolic link 7 - multiple unicode strings Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- Documentation/ABI/testing/configfs-usb-gadget | 21 ++ drivers/usb/gadget/configfs.c | 201 ++++++++++++++++++ include/linux/usb/composite.h | 4 + 3 files changed, 226 insertions(+) diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget index 5c0b3e6eb981..95a36589a66b 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget +++ b/Documentation/ABI/testing/configfs-usb-gadget @@ -75,6 +75,27 @@ Description: compatible_id - 8-byte string for "Compatible ID" sub_compatible_id - 8-byte string for "Sub Compatible ID" +What: /config/usb-gadget/gadget/functions/./interface./ +Date: May 2014 +KernelVersion: 3.16 +Description: + This group contains "Extended Property Descriptors" specific for one + gadget's USB interface or one interface group described + by an IAD. + + The attributes: + + type - value 1..7 for interpreting the data + 1: unicode string + 2: unicode string with environment variable + 3: binary + 4: little-endian 32-bit + 5: big-endian 32-bit + 6: unicode string with a symbolic link + 7: multiple unicode strings + data - blob of data to be interpreted depending on + type + What: /config/usb-gadget/gadget/strings Date: Jun 2013 KernelVersion: 3.11 diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index fa6cb06cca09..2ddcd635ca2a 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -7,6 +7,7 @@ #include #include "configfs.h" #include "u_f.h" +#include "u_os_desc.h" int check_user_usb_string(const char *name, struct usb_gadget_strings *stringtab_dev) @@ -941,6 +942,204 @@ static struct config_item_type os_desc_type = { CONFIGFS_ATTR_STRUCT(usb_os_desc); CONFIGFS_ATTR_OPS(usb_os_desc); + +static inline struct usb_os_desc_ext_prop +*to_usb_os_desc_ext_prop(struct config_item *item) +{ + return container_of(item, struct usb_os_desc_ext_prop, item); +} + +CONFIGFS_ATTR_STRUCT(usb_os_desc_ext_prop); +CONFIGFS_ATTR_OPS(usb_os_desc_ext_prop); + +static ssize_t ext_prop_type_show(struct usb_os_desc_ext_prop *ext_prop, + char *page) +{ + return sprintf(page, "%d", ext_prop->type); +} + +static ssize_t ext_prop_type_store(struct usb_os_desc_ext_prop *ext_prop, + const char *page, size_t len) +{ + struct usb_os_desc *desc = to_usb_os_desc(ext_prop->item.ci_parent); + u8 type; + int ret; + + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + ret = kstrtou8(page, 0, &type); + if (ret) + goto end; + if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) { + ret = -EINVAL; + goto end; + } + + if ((ext_prop->type == USB_EXT_PROP_BINARY || + ext_prop->type == USB_EXT_PROP_LE32 || + ext_prop->type == USB_EXT_PROP_BE32) && + (type == USB_EXT_PROP_UNICODE || + type == USB_EXT_PROP_UNICODE_ENV || + type == USB_EXT_PROP_UNICODE_LINK)) + ext_prop->data_len <<= 1; + else if ((ext_prop->type == USB_EXT_PROP_UNICODE || + ext_prop->type == USB_EXT_PROP_UNICODE_ENV || + ext_prop->type == USB_EXT_PROP_UNICODE_LINK) && + (type == USB_EXT_PROP_BINARY || + type == USB_EXT_PROP_LE32 || + type == USB_EXT_PROP_BE32)) + ext_prop->data_len >>= 1; + ext_prop->type = type; + ret = len; + +end: + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + return ret; +} + +static ssize_t ext_prop_data_show(struct usb_os_desc_ext_prop *ext_prop, + char *page) +{ + int len = ext_prop->data_len; + + if (ext_prop->type == USB_EXT_PROP_UNICODE || + ext_prop->type == USB_EXT_PROP_UNICODE_ENV || + ext_prop->type == USB_EXT_PROP_UNICODE_LINK) + len >>= 1; + memcpy(page, ext_prop->data, len); + + return len; +} + +static ssize_t ext_prop_data_store(struct usb_os_desc_ext_prop *ext_prop, + const char *page, size_t len) +{ + struct usb_os_desc *desc = to_usb_os_desc(ext_prop->item.ci_parent); + char *new_data; + size_t ret_len = len; + + if (page[len - 1] == '\n' || page[len - 1] == '\0') + --len; + new_data = kzalloc(len, GFP_KERNEL); + if (!new_data) + return -ENOMEM; + + memcpy(new_data, page, len); + + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + kfree(ext_prop->data); + ext_prop->data = new_data; + desc->ext_prop_len -= ext_prop->data_len; + ext_prop->data_len = len; + desc->ext_prop_len += ext_prop->data_len; + if (ext_prop->type == USB_EXT_PROP_UNICODE || + ext_prop->type == USB_EXT_PROP_UNICODE_ENV || + ext_prop->type == USB_EXT_PROP_UNICODE_LINK) { + desc->ext_prop_len -= ext_prop->data_len; + ext_prop->data_len <<= 1; + ext_prop->data_len += 2; + desc->ext_prop_len += ext_prop->data_len; + } + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + return ret_len; +} + +static struct usb_os_desc_ext_prop_attribute ext_prop_type = + __CONFIGFS_ATTR(type, S_IRUGO | S_IWUSR, + ext_prop_type_show, ext_prop_type_store); + +static struct usb_os_desc_ext_prop_attribute ext_prop_data = + __CONFIGFS_ATTR(data, S_IRUGO | S_IWUSR, + ext_prop_data_show, ext_prop_data_store); + +static struct configfs_attribute *ext_prop_attrs[] = { + &ext_prop_type.attr, + &ext_prop_data.attr, + NULL, +}; + +static void usb_os_desc_ext_prop_release(struct config_item *item) +{ + struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item); + + kfree(ext_prop); /* frees a whole chunk */ +} + +static struct configfs_item_operations ext_prop_ops = { + .release = usb_os_desc_ext_prop_release, + .show_attribute = usb_os_desc_ext_prop_attr_show, + .store_attribute = usb_os_desc_ext_prop_attr_store, +}; + +static struct config_item *ext_prop_make( + struct config_group *group, + const char *name) +{ + struct usb_os_desc_ext_prop *ext_prop; + struct config_item_type *ext_prop_type; + struct usb_os_desc *desc; + char *vlabuf; + + vla_group(data_chunk); + vla_item(data_chunk, struct usb_os_desc_ext_prop, ext_prop, 1); + vla_item(data_chunk, struct config_item_type, ext_prop_type, 1); + + vlabuf = kzalloc(vla_group_size(data_chunk), GFP_KERNEL); + if (!vlabuf) + return ERR_PTR(-ENOMEM); + + ext_prop = vla_ptr(vlabuf, data_chunk, ext_prop); + ext_prop_type = vla_ptr(vlabuf, data_chunk, ext_prop_type); + + desc = container_of(group, struct usb_os_desc, group); + ext_prop_type->ct_item_ops = &ext_prop_ops; + ext_prop_type->ct_attrs = ext_prop_attrs; + ext_prop_type->ct_owner = desc->owner; + + config_item_init_type_name(&ext_prop->item, name, ext_prop_type); + + ext_prop->name = kstrdup(name, GFP_KERNEL); + if (!ext_prop->name) { + kfree(vlabuf); + return ERR_PTR(-ENOMEM); + } + desc->ext_prop_len += 14; + ext_prop->name_len = 2 * strlen(ext_prop->name) + 2; + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + desc->ext_prop_len += ext_prop->name_len; + list_add_tail(&ext_prop->entry, &desc->ext_prop); + ++desc->ext_prop_count; + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + + return &ext_prop->item; +} + +static void ext_prop_drop(struct config_group *group, struct config_item *item) +{ + struct usb_os_desc_ext_prop *ext_prop = to_usb_os_desc_ext_prop(item); + struct usb_os_desc *desc = to_usb_os_desc(&group->cg_item); + + if (desc->opts_mutex) + mutex_lock(desc->opts_mutex); + list_del(&ext_prop->entry); + --desc->ext_prop_count; + kfree(ext_prop->name); + desc->ext_prop_len -= (ext_prop->name_len + ext_prop->data_len + 14); + if (desc->opts_mutex) + mutex_unlock(desc->opts_mutex); + config_item_put(item); +} + +static struct configfs_group_operations interf_grp_ops = { + .make_item = &ext_prop_make, + .drop_item = &ext_prop_drop, +}; + static struct configfs_item_operations interf_item_ops = { .show_attribute = usb_os_desc_attr_show, .store_attribute = usb_os_desc_attr_store, @@ -1048,6 +1247,7 @@ int usb_os_desc_prepare_interf_dir(struct config_group *parent, os_desc_group->default_groups = interface_groups; interface_type->ct_item_ops = &interf_item_ops; + interface_type->ct_group_ops = &interf_grp_ops; interface_type->ct_attrs = interf_grp_attrs; interface_type->ct_owner = owner; @@ -1055,6 +1255,7 @@ int usb_os_desc_prepare_interf_dir(struct config_group *parent, struct usb_os_desc *d; d = desc[n_interf]; + d->owner = owner; config_group_init_type_name(&d->group, "", interface_type); config_item_set_name(&d->group.cg_item, "interface.%d", n_interf); diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 9c3903d76781..7373203140e7 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -64,6 +64,7 @@ struct usb_configuration; * @name: Extended Property name * @data_len: Length of Extended Property blob (for unicode store double len) * @data: Extended Property blob + * @item: Represents this Extended Property in configfs */ struct usb_os_desc_ext_prop { struct list_head entry; @@ -72,6 +73,7 @@ struct usb_os_desc_ext_prop { char *name; int data_len; char *data; + struct config_item item; }; /** @@ -82,6 +84,7 @@ struct usb_os_desc_ext_prop { * @ext_prop_count: Number of Extended Properties * @opts_mutex: Optional mutex protecting config data of a usb_function_instance * @group: Represents OS descriptors associated with an interface in configfs + * @owner: Module associated with this OS descriptor */ struct usb_os_desc { char *ext_compat_id; @@ -90,6 +93,7 @@ struct usb_os_desc { int ext_prop_count; struct mutex *opts_mutex; struct config_group group; + struct module *owner; }; /** From b09e99ee7c2b7ee80cca128b93b07fb830e6ecad Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 15 May 2014 15:53:32 +0300 Subject: [PATCH 125/314] usb: dwc3: no need to initialize ret variable First usage of ret variable will re-write initial value. Thus, there is no need to initialize it. Signed-off-by: Andy Shevchenko Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 2 +- drivers/usb/dwc3/dwc3-exynos.c | 12 +++++------- drivers/usb/dwc3/dwc3-omap.c | 2 +- drivers/usb/dwc3/dwc3-pci.c | 2 +- drivers/usb/dwc3/gadget.c | 2 +- 5 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index af8c8f6e67b3..3f59c1247825 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -626,7 +626,7 @@ static int dwc3_probe(struct platform_device *pdev) struct resource *res; struct dwc3 *dwc; - int ret = -ENOMEM; + int ret; void __iomem *regs; void *mem; diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 0ed85834bfec..f9fb8adb785b 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -110,12 +110,12 @@ static int dwc3_exynos_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; - int ret = -ENOMEM; + int ret; exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL); if (!exynos) { dev_err(dev, "not enough memory\n"); - goto err1; + return -ENOMEM; } /* @@ -125,21 +125,20 @@ static int dwc3_exynos_probe(struct platform_device *pdev) */ ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); if (ret) - goto err1; + return ret; platform_set_drvdata(pdev, exynos); ret = dwc3_exynos_register_phys(exynos); if (ret) { dev_err(dev, "couldn't register PHYs\n"); - goto err1; + return ret; } clk = devm_clk_get(dev, "usbdrd30"); if (IS_ERR(clk)) { dev_err(dev, "couldn't get clock\n"); - ret = -EINVAL; - goto err1; + return -EINVAL; } exynos->dev = dev; @@ -189,7 +188,6 @@ err3: regulator_disable(exynos->vdd33); err2: clk_disable_unprepare(clk); -err1: return ret; } diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 1160ff41bed4..4af4c3567656 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -393,7 +393,7 @@ static int dwc3_omap_probe(struct platform_device *pdev) struct extcon_dev *edev; struct regulator *vbus_reg = NULL; - int ret = -ENOMEM; + int ret; int irq; int utmi_mode = 0; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 1ed95e0386eb..e76d1ca5531c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -99,7 +99,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, struct resource res[2]; struct platform_device *dwc3; struct dwc3_pci *glue; - int ret = -ENOMEM; + int ret; struct device *dev = &pci->dev; glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index e0b791050930..696b472274ef 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -584,7 +584,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, { struct dwc3 *dwc = dep->dwc; u32 reg; - int ret = -ENOMEM; + int ret; dev_vdbg(dwc->dev, "Enabling %s\n", dep->name); From f1c7e7108109bfa12ad4544dce5cdcbf3c6f0a0a Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 15 May 2014 15:53:33 +0300 Subject: [PATCH 126/314] usb: dwc3: convert to pcim_enable_device() This fixes a bug when dwc3_pci_register_phys() fails and leaves device enabled. Signed-off-by: Andy Shevchenko Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index e76d1ca5531c..a60bab7dfa0a 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -110,7 +110,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, glue->dev = dev; - ret = pci_enable_device(pci); + ret = pcim_enable_device(pci); if (ret) { dev_err(dev, "failed to enable pci device\n"); return -ENODEV; @@ -127,8 +127,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); if (!dwc3) { dev_err(dev, "couldn't allocate dwc3 device\n"); - ret = -ENOMEM; - goto err1; + return -ENOMEM; } memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); @@ -145,7 +144,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); if (ret) { dev_err(dev, "couldn't add resources to dwc3 device\n"); - goto err1; + return ret; } pci_set_drvdata(pci, glue); @@ -167,9 +166,6 @@ static int dwc3_pci_probe(struct pci_dev *pci, err3: platform_device_put(dwc3); -err1: - pci_disable_device(pci); - return ret; } @@ -180,7 +176,6 @@ static void dwc3_pci_remove(struct pci_dev *pci) platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - pci_disable_device(pci); } static const struct pci_device_id dwc3_pci_id_table[] = { From 1ade5d7e179170e3cf4780ba578ebb8cc7aa15ef Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Thu, 15 May 2014 13:43:50 +0200 Subject: [PATCH 127/314] usb: gadget: f_uac2: don't queue new requests when shutting down In some circumstances when g_audio is being unloaded there happens an endless loop in udc driver. It has happend on a board with s3c-hsotg. If there are requests in endpoint's queue, they are completed in a loop. But completing them might cause appending new requests to the queue. This patch causes agdev_iso_complete() to return immediately if request's status is -ESHUTDOWN. If it does not return immediately, then although the current request is removed from the queue, a new one is appended to the queue, so the above mentioned loop cannot end. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_uac2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c index c024d27fcce2..6261db4a9910 100644 --- a/drivers/usb/gadget/f_uac2.c +++ b/drivers/usb/gadget/f_uac2.c @@ -196,7 +196,7 @@ agdev_iso_complete(struct usb_ep *ep, struct usb_request *req) struct snd_uac2_chip *uac2 = prm->uac2; /* i/f shutting down */ - if (!prm->ep_enabled) + if (!prm->ep_enabled || req->status == -ESHUTDOWN) return; /* From 79cb5b533aa9dbb05123b3b7d170e686da558a35 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Wed, 14 May 2014 21:32:39 +0100 Subject: [PATCH 128/314] usb: phy: Add SMSC USB334x PHY ID adding new device id for SMSC USB334x devices. Signed-off-by: Liviu Dudau Signed-off-by: Ryan Harkin Signed-off-by: Mark Brown Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-ulpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c index 17ea3f271bd8..4e3877c329f2 100644 --- a/drivers/usb/phy/phy-ulpi.c +++ b/drivers/usb/phy/phy-ulpi.c @@ -48,6 +48,7 @@ static struct ulpi_info ulpi_ids[] = { ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"), + ULPI_INFO(ULPI_ID(0x0424, 0x0009), "SMSC USB334x"), ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"), }; From 16bf900f50ec7fd2f45dc3a297d7936075cdae55 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 23 Mar 2014 16:25:09 +0100 Subject: [PATCH 129/314] usb: gadget: uvc: Switch to monotonic clock for buffer timestamps The wall time clock isn't useful for applications as it can jump around due to time adjustement. Switch to the monotonic clock. Signed-off-by: Laurent Pinchart Reviewed-by: Hans Verkuil Acked-by: Felipe Balbi Signed-off-by: Felipe Balbi --- drivers/usb/gadget/uvc_queue.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 0bb5d50075de..9ac4ffe19014 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -20,6 +20,7 @@ #include #include +#include #include #include "uvc.h" @@ -379,14 +380,8 @@ static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, else nextbuf = NULL; - /* - * FIXME: with videobuf2, the sequence number or timestamp fields - * are valid only for video capture devices and the UVC gadget usually - * is a video output device. Keeping these until the specs are clear on - * this aspect. - */ buf->buf.v4l2_buf.sequence = queue->sequence++; - do_gettimeofday(&buf->buf.v4l2_buf.timestamp); + v4l2_get_timestamp(&buf->buf.v4l2_buf.timestamp); vb2_set_plane_payload(&buf->buf, 0, buf->bytesused); vb2_buffer_done(&buf->buf, VB2_BUF_STATE_DONE); From f17388cc29090a94268256f1a17445e715bc5d94 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 23 Mar 2014 16:25:09 +0100 Subject: [PATCH 130/314] usb: gadget: uvc: Set the V4L2 buffer field to V4L2_FIELD_NONE The UVC gadget driver doesn't support interlaced video but left the buffer field uninitialized. Set it to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart Reviewed-by: Hans Verkuil Acked-by: Felipe Balbi Signed-off-by: Felipe Balbi --- drivers/usb/gadget/uvc_queue.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 9ac4ffe19014..305eb491c919 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -380,6 +380,7 @@ static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, else nextbuf = NULL; + buf->buf.v4l2_buf.field = V4L2_FIELD_NONE; buf->buf.v4l2_buf.sequence = queue->sequence++; v4l2_get_timestamp(&buf->buf.v4l2_buf.timestamp); From c9e44b5354000386ef1324d200bf99b597756594 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 23 Mar 2014 16:19:50 +0100 Subject: [PATCH 131/314] usb: gadget: uvc: Set the vb2 queue timestamp flags The vb2 queue timestamp_flags field must be set by drivers, as enforced by a WARN_ON in vb2_queue_init. The UVC gadget driver failed to do so. This resulted in the following warning. [ 2.104371] g_webcam gadget: uvc_function_bind [ 2.105567] ------------[ cut here ]------------ [ 2.105567] ------------[ cut here ]------------ [ 2.106779] WARNING: CPU: 0 PID: 1 at drivers/media/v4l2-core/videobuf2-core.c:2207 vb2_queue_init+0xa3/0x113() Fix it. Reported-by: Fengguang Wu Signed-off-by: Laurent Pinchart Reviewed-by: Hans Verkuil Acked-by: Felipe Balbi Signed-off-by: Felipe Balbi --- drivers/usb/gadget/uvc_queue.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 305eb491c919..1c29bc954db9 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -137,6 +137,8 @@ static int uvc_queue_init(struct uvc_video_queue *queue, queue->queue.buf_struct_size = sizeof(struct uvc_buffer); queue->queue.ops = &uvc_queue_qops; queue->queue.mem_ops = &vb2_vmalloc_memops; + queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC + | V4L2_BUF_FLAG_TSTAMP_SRC_EOF; ret = vb2_queue_init(&queue->queue); if (ret) return ret; From 84237bfb0b112a18a7c5d4d35a0663c97bdd14c6 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Thu, 15 May 2014 14:28:45 +0200 Subject: [PATCH 132/314] usb: gadget: net2280: Fix NULL pointer dereference When DEBUG is enabled driver->driver.name is accessed, but driver can be NULL [ 174.411689] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 174.429043] RIP: 0010:[] [] net2280_stop+0xa3/0x100 [net2280] [ 174.457910] Call Trace: [ 174.459503] [] usb_gadget_remove_driver+0x5a/0xb0 [udc_core] [ 174.462693] [] usb_del_gadget_udc+0xb4/0x110 [udc_core] [ 174.464316] [] net2280_remove+0x2f/0x1c0 [net2280] Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Felipe Balbi --- drivers/usb/gadget/net2280.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 43e5e2f9888f..300b3a71383b 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1972,7 +1972,9 @@ static int net2280_stop(struct usb_gadget *_gadget, device_remove_file (&dev->pdev->dev, &dev_attr_function); device_remove_file (&dev->pdev->dev, &dev_attr_queues); - DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name); + DEBUG(dev, "unregistered driver '%s'\n", + driver ? driver->driver.name : ""); + return 0; } From 8c240dc17d900cc6453b48bdd513f4243a9ec97d Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Fri, 16 May 2014 18:19:54 +0400 Subject: [PATCH 133/314] usb: musb: tusb6010: Add tusb_revision to struct musb to store the revision. Add field to store tusb6010 revision value. Read the revision at the startup and store to the variable. Signed-off-by: Matwey V. Kornilov Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 1 + drivers/usb/musb/tusb6010.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 47e88747e3a7..d155a156f240 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -339,6 +339,7 @@ struct musb { dma_addr_t async; dma_addr_t sync; void __iomem *sync_va; + u8 tusb_revision; #endif /* passed down from chip/board specific irq handlers */ diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index f38a8dbd6075..8a746421a325 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1012,6 +1012,7 @@ static int tusb_musb_start(struct musb *musb) goto err; } + musb->tusb_revision = tusb_get_revision(musb); ret = tusb_print_revision(musb); if (ret < 2) { printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n", From 7751b6fb05869bcb318e74420148c06577adf894 Mon Sep 17 00:00:00 2001 From: "Matwey V. Kornilov" Date: Fri, 16 May 2014 18:20:52 +0400 Subject: [PATCH 134/314] usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call. The value of the revision is stored in musb->tusb_revision, so don't re-read it every time. Exporting tusb_get_revision is not needed anymore, so the dependency loop between tusb6010 and tusb6010_omap is resolved. Signed-off-by: Matwey V. Kornilov Signed-off-by: Felipe Balbi --- drivers/usb/musb/tusb6010.c | 19 ++++++++----------- drivers/usb/musb/tusb6010.h | 2 -- drivers/usb/musb/tusb6010_omap.c | 2 +- 3 files changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 8a746421a325..159ef4be1ef2 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -43,7 +43,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on); * Checks the revision. We need to use the DMA register as 3.0 does not * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV. */ -u8 tusb_get_revision(struct musb *musb) +static u8 tusb_get_revision(struct musb *musb) { void __iomem *tbase = musb->ctrl_base; u32 die_id; @@ -59,14 +59,13 @@ u8 tusb_get_revision(struct musb *musb) return rev; } -EXPORT_SYMBOL_GPL(tusb_get_revision); -static int tusb_print_revision(struct musb *musb) +static void tusb_print_revision(struct musb *musb) { void __iomem *tbase = musb->ctrl_base; u8 rev; - rev = tusb_get_revision(musb); + rev = musb->tusb_revision; pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n", "prcm", @@ -85,8 +84,6 @@ static int tusb_print_revision(struct musb *musb) TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)), "rev", TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev)); - - return tusb_get_revision(musb); } #define WBUS_QUIRK_MASK (TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \ @@ -350,7 +347,7 @@ static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables) u32 reg; if ((wakeup_enables & TUSB_PRCM_WBUS) - && (tusb_get_revision(musb) == TUSB_REV_30)) + && (musb->tusb_revision == TUSB_REV_30)) tusb_wbus_quirk(musb, 1); tusb_set_clock_source(musb, 0); @@ -798,7 +795,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci) u32 reg; u32 i; - if (tusb_get_revision(musb) == TUSB_REV_30) + if (musb->tusb_revision == TUSB_REV_30) tusb_wbus_quirk(musb, 0); /* there are issues re-locking the PLL on wakeup ... */ @@ -1013,10 +1010,10 @@ static int tusb_musb_start(struct musb *musb) } musb->tusb_revision = tusb_get_revision(musb); - ret = tusb_print_revision(musb); - if (ret < 2) { + tusb_print_revision(musb); + if (musb->tusb_revision < 2) { printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n", - ret); + musb->tusb_revision); goto err; } diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index 1864e24ac965..aec86c86ce32 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -12,8 +12,6 @@ #ifndef __TUSB6010_H__ #define __TUSB6010_H__ -extern u8 tusb_get_revision(struct musb *musb); - #ifdef CONFIG_USB_TUSB_OMAP_DMA #define tusb_dma_omap() 1 #else diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index e33b6b2c44c2..3ce152c0408e 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -677,7 +677,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba tusb_dma->controller.channel_program = tusb_omap_dma_program; tusb_dma->controller.channel_abort = tusb_omap_dma_abort; - if (tusb_get_revision(musb) >= TUSB_REV_30) + if (musb->tusb_revision >= TUSB_REV_30) tusb_dma->multichannel = 1; for (i = 0; i < MAX_DMAREQ; i++) { From 654a55d34f880bb56b3cebab53771a09a404a1f8 Mon Sep 17 00:00:00 2001 From: Lin Wang Date: Thu, 8 May 2014 19:25:54 +0300 Subject: [PATCH 135/314] xhci: fix wrong port number reported when setting USB2.0 hardware LPM. This patch fix wrong port number reported when trying to enable/disable USB2.0 hardware LPM. Signed-off-by: Lin Wang Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 300836972faa..708cb29ef3f8 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4092,7 +4092,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", - enable ? "enable" : "disable", port_num); + enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ From 29d2fef8be1165a26984a94fbcf81d68c1442fc5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 8 May 2014 19:25:56 +0300 Subject: [PATCH 136/314] usb: catch attempts to submit urbs with a vmalloc'd transfer buffer Save someone else the debug cycles of figuring out why a driver's transfer request is failing or causing undefined system behavior. Buffers submitted for dma must come from GFP allocated / DMA-able memory. Return -EAGAIN matching the return value for dma_mapping_error() cases. Acked-by: Alan Stern Cc: Sarah Sharp Cc: Mathias Nyman Signed-off-by: Dan Williams Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9c4e2922b04d..adddc66c9e8d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1502,6 +1502,9 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, ret = -EAGAIN; else urb->transfer_flags |= URB_DMA_MAP_PAGE; + } else if (is_vmalloc_addr(urb->transfer_buffer)) { + WARN_ONCE(1, "transfer buffer not dma capable\n"); + ret = -EAGAIN; } else { urb->transfer_dma = dma_map_single( hcd->self.controller, From 961b3d0a990f8b1214f5425c4acbebbd0b777e36 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 8 May 2014 19:25:57 +0300 Subject: [PATCH 137/314] usb: xhci: Use IS_ENABLED() macro Using the IS_ENABLED() macro can make the code shorter and easier to read. Signed-off-by: Fabio Estevam Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 4746816aed3e..cc67c7686706 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1738,8 +1738,7 @@ static inline int xhci_register_pci(void) { return 0; } static inline void xhci_unregister_pci(void) {} #endif -#if defined(CONFIG_USB_XHCI_PLATFORM) \ - || defined(CONFIG_USB_XHCI_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_USB_XHCI_PLATFORM) int xhci_register_plat(void); void xhci_unregister_plat(void); #else From a62445aead1484ea753496682ef8648a921479be Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 8 May 2014 19:25:58 +0300 Subject: [PATCH 138/314] xhci: Use pci_enable_msix_exact() instead of pci_enable_msix() As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev Cc: Sarah Sharp Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 708cb29ef3f8..88ec076d929d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -291,7 +291,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) xhci->msix_entries[i].vector = 0; } - ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count); + ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count); if (ret) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Failed to enable MSI-X"); From be9820383b10984d77abe1abc26e2b7029e78e21 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 8 May 2014 19:25:59 +0300 Subject: [PATCH 139/314] xhci: Report max device limit when Enable Slot command fails. xHCI host controllers may only support a limited number of device slot IDs, which is usually far less than the theoretical maximum number of devices (255) that the USB specifications advertise. This is frustrating to consumers that expect to be able to plug in a large number of devices. Add a print statement when the Enable Slot command fails to show how many devices the host supports. We can't change hardware manufacturer's design decisions, but hopefully we can save customers a little bit of time trying to debug why their host mysteriously fails when too many devices are plugged in. Signed-off-by: Sarah Sharp Reported-by: Amund Hov Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 88ec076d929d..92e1dda7246b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3696,6 +3696,9 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) if (!xhci->slot_id) { xhci_err(xhci, "Error while assigning device slot ID\n"); + xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", + HCS_MAX_SLOTS( + readl(&xhci->cap_regs->hcs_params1))); return 0; } From ddba5cd0aeff5bbed92ebdf4b1223300b0541e78 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 8 May 2014 19:26:00 +0300 Subject: [PATCH 140/314] xhci: Use command structures when queuing commands on the command ring To create a global command queue we require that each command put on the command ring is submitted with a command structure. Functions that queue commands and wait for completion need to allocate a command before submitting it, and free it once completed. The following command queuing functions need to be modified. xhci_configure_endpoint() xhci_address_device() xhci_queue_slot_control() xhci_queue_stop_endpoint() xhci_queue_new_dequeue_state() xhci_queue_reset_ep() xhci_configure_endpoint() xhci_configure_endpoint() could already be called with a command structure, and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These are changed and a command structure is now required. This change also simplifies the configure endpoint command completion handling and the "goto bandwidth_change" handling code can be removed. In some cases the command queuing function is called in interrupt context. These commands needs to be allocated atomically, and they can't wait for completion. These commands will in this patch be freed directly after queuing, but freeing will be moved to the command completion event handler in a later patch once we get the global command queue up.(Just so that we won't leak memory in the middle of the patch set) Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 21 +++- drivers/usb/host/xhci-ring.c | 107 ++++++++++--------- drivers/usb/host/xhci.c | 194 +++++++++++++++++++++++------------ drivers/usb/host/xhci.h | 31 +++--- 4 files changed, 216 insertions(+), 137 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 1ad6bc1951c7..3ce9c0ac2614 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -20,7 +20,8 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include + +#include #include #include "xhci.h" @@ -284,12 +285,22 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) spin_lock_irqsave(&xhci->lock, flags); for (i = LAST_EP_INDEX; i > 0; i--) { - if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) - xhci_queue_stop_endpoint(xhci, slot_id, i, suspend); + if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, + GFP_NOIO); + if (!command) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cmd); + return -ENOMEM; + + } + xhci_queue_stop_endpoint(xhci, command, slot_id, i, + suspend); + } } - cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); - xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend); + xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7a0e3c720c00..b172a7dee6ac 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -123,16 +123,6 @@ static int enqueue_is_link_trb(struct xhci_ring *ring) return TRB_TYPE_LINK_LE32(link->control); } -union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring) -{ - /* Enqueue pointer can be left pointing to the link TRB, - * we must handle that - */ - if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control)) - return ring->enq_seg->next->trbs; - return ring->enqueue; -} - /* Updates trb to point to the next TRB in the ring, and updates seg if the next * TRB is in a new segment. This does not skip over link TRBs, and it does not * effect the ring dequeue or enqueue pointers. @@ -684,12 +674,14 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, } } -static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, +static int queue_set_tr_deq(struct xhci_hcd *xhci, + struct xhci_command *cmd, int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_segment *deq_seg, union xhci_trb *deq_ptr, u32 cycle_state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, + struct xhci_command *cmd, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_dequeue_state *deq_state) @@ -704,7 +696,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, deq_state->new_deq_ptr, (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr), deq_state->new_cycle_state); - queue_set_tr_deq(xhci, slot_id, ep_index, stream_id, + queue_set_tr_deq(xhci, cmd, slot_id, ep_index, stream_id, deq_state->new_deq_seg, deq_state->new_deq_ptr, (u32) deq_state->new_cycle_state); @@ -858,7 +850,9 @@ remove_finished_td: /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { - xhci_queue_new_dequeue_state(xhci, + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + xhci_queue_new_dequeue_state(xhci, command, slot_id, ep_index, ep->stopped_td->urb->stream_id, &deq_state); @@ -1206,9 +1200,11 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, * because the HW can't handle two commands being queued in a row. */ if (xhci->quirks & XHCI_RESET_EP_QUIRK) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Queueing configure endpoint command"); - xhci_queue_configure_endpoint(xhci, + xhci_queue_configure_endpoint(xhci, command, xhci->devs[slot_id]->in_ctx->dma, slot_id, false); xhci_ring_cmd_db(xhci); @@ -1465,7 +1461,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, add_flags - SLOT_FLAG == drop_flags) { ep_state = virt_dev->eps[ep_index].ep_state; if (!(ep_state & EP_HALTED)) - goto bandwidth_change; + return; xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Completed config ep cmd - " "last ep index = %d, state = %d", @@ -1475,11 +1471,6 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, ring_doorbell_for_active_rings(xhci, slot_id, ep_index); return; } -bandwidth_change: - xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, - "Completed config ep cmd"); - virt_dev->cmd_status = cmd_comp_code; - complete(&virt_dev->cmd_completion); return; } @@ -1938,11 +1929,16 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, struct xhci_td *td, union xhci_trb *event_trb) { struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + if (!command) + return; + ep->ep_state |= EP_HALTED; ep->stopped_td = td; ep->stopped_stream = stream_id; - xhci_queue_reset_ep(xhci, slot_id, ep_index); + xhci_queue_reset_ep(xhci, command, slot_id, ep_index); xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index); ep->stopped_td = NULL; @@ -2654,7 +2650,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, * successful event after a short transfer. * Ignore it. */ - if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && + if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && ep_ring->last_td_was_short) { ep_ring->last_td_was_short = false; ret = 0; @@ -3996,8 +3992,9 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB * because the command event handler may want to resubmit a failed command. */ -static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, - u32 field3, u32 field4, bool command_must_succeed) +static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 field1, u32 field2, + u32 field3, u32 field4, bool command_must_succeed) { int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; @@ -4014,57 +4011,65 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, "unfailable commands failed.\n"); return ret; } + if (cmd->completion) + cmd->command_trb = xhci->cmd_ring->enqueue; + else + kfree(cmd); + queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); return 0; } /* Queue a slot enable or disable request on the command ring */ -int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) +int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 trb_type, u32 slot_id) { - return queue_command(xhci, 0, 0, 0, + return queue_command(xhci, cmd, 0, 0, 0, TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false); } /* Queue an address device command TRB */ -int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, enum xhci_setup_dev setup) +int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup) { - return queue_command(xhci, lower_32_bits(in_ctx_ptr), + return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id) | (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false); } -int xhci_queue_vendor_command(struct xhci_hcd *xhci, +int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd, u32 field1, u32 field2, u32 field3, u32 field4) { - return queue_command(xhci, field1, field2, field3, field4, false); + return queue_command(xhci, cmd, field1, field2, field3, field4, false); } /* Queue a reset device command TRB */ -int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id) +int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 slot_id) { - return queue_command(xhci, 0, 0, 0, + return queue_command(xhci, cmd, 0, 0, 0, TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id), false); } /* Queue a configure endpoint command TRB */ -int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, +int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, + struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed) { - return queue_command(xhci, lower_32_bits(in_ctx_ptr), + return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id), command_must_succeed); } /* Queue an evaluate context command TRB */ -int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, bool command_must_succeed) +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed) { - return queue_command(xhci, lower_32_bits(in_ctx_ptr), + return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), command_must_succeed); @@ -4074,25 +4079,26 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop * activity on an endpoint that is about to be suspended. */ -int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index, int suspend) +int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index, int suspend) { u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 type = TRB_TYPE(TRB_STOP_RING); u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend); - return queue_command(xhci, 0, 0, 0, + return queue_command(xhci, cmd, 0, 0, 0, trb_slot_id | trb_ep_index | type | trb_suspend, false); } /* Set Transfer Ring Dequeue Pointer command. * This should not be used for endpoints that have streams enabled. */ -static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index, unsigned int stream_id, - struct xhci_segment *deq_seg, - union xhci_trb *deq_ptr, u32 cycle_state) +static int queue_set_tr_deq(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, + unsigned int ep_index, unsigned int stream_id, + struct xhci_segment *deq_seg, + union xhci_trb *deq_ptr, u32 cycle_state) { dma_addr_t addr; u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); @@ -4119,18 +4125,19 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, ep->queued_deq_ptr = deq_ptr; if (stream_id) trb_sct = SCT_FOR_TRB(SCT_PRI_TR); - return queue_command(xhci, lower_32_bits(addr) | trb_sct | cycle_state, + return queue_command(xhci, cmd, + lower_32_bits(addr) | trb_sct | cycle_state, upper_32_bits(addr), trb_stream_id, trb_slot_id | trb_ep_index | type, false); } -int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index) +int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index) { u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 type = TRB_TYPE(TRB_RESET_EP); - return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type, - false); + return queue_command(xhci, cmd, 0, 0, 0, + trb_slot_id | trb_ep_index | type, false); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 92e1dda7246b..9a4c6dfa26dc 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -641,10 +641,14 @@ int xhci_run(struct usb_hcd *hcd) writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); xhci_print_ir_set(xhci, 0); - if (xhci->quirks & XHCI_NEC_HOST) - xhci_queue_vendor_command(xhci, 0, 0, 0, + if (xhci->quirks & XHCI_NEC_HOST) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return -ENOMEM; + xhci_queue_vendor_command(xhci, command, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); - + } xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); return 0; @@ -1187,10 +1191,10 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct urb *urb) { - struct xhci_container_ctx *in_ctx; struct xhci_container_ctx *out_ctx; struct xhci_input_control_ctx *ctrl_ctx; struct xhci_ep_ctx *ep_ctx; + struct xhci_command *command; int max_packet_size; int hw_max_packet_size; int ret = 0; @@ -1215,18 +1219,24 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, /* FIXME: This won't work if a non-default control endpoint * changes max packet sizes. */ - in_ctx = xhci->devs[slot_id]->in_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + + command = xhci_alloc_command(xhci, false, true, GFP_KERNEL); + if (!command) + return -ENOMEM; + + command->in_ctx = xhci->devs[slot_id]->in_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto command_cleanup; } /* Set up the modified control endpoint 0 */ xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, xhci->devs[slot_id]->out_ctx, ep_index); - ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size)); @@ -1234,17 +1244,20 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, ctrl_ctx->drop_flags = 0; xhci_dbg(xhci, "Slot %d input context\n", slot_id); - xhci_dbg_ctx(xhci, in_ctx, ep_index); + xhci_dbg_ctx(xhci, command->in_ctx, ep_index); xhci_dbg(xhci, "Slot %d output context\n", slot_id); xhci_dbg_ctx(xhci, out_ctx, ep_index); - ret = xhci_configure_endpoint(xhci, urb->dev, NULL, + ret = xhci_configure_endpoint(xhci, urb->dev, command, true, false); /* Clean up the input context for later use by bandwidth * functions. */ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); +command_cleanup: + kfree(command->completion); + kfree(command); } return ret; } @@ -1465,6 +1478,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) unsigned int ep_index; struct xhci_ring *ep_ring; struct xhci_virt_ep *ep; + struct xhci_command *command; xhci = hcd_to_xhci(hcd); spin_lock_irqsave(&xhci->lock, flags); @@ -1534,12 +1548,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) * the first cancellation to be handled. */ if (!(ep->ep_state & EP_HALT_PENDING)) { + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); ep->ep_state |= EP_HALT_PENDING; ep->stop_cmds_pending++; ep->stop_cmd_timer.expires = jiffies + XHCI_STOP_EP_CMD_TIMEOUT * HZ; add_timer(&ep->stop_cmd_timer); - xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index, 0); + xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id, + ep_index, 0); xhci_ring_cmd_db(xhci); } done: @@ -2576,21 +2592,16 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, int ret; int timeleft; unsigned long flags; - struct xhci_container_ctx *in_ctx; struct xhci_input_control_ctx *ctrl_ctx; - struct completion *cmd_completion; - u32 *cmd_status; struct xhci_virt_device *virt_dev; - union xhci_trb *cmd_trb; + + if (!command) + return -EINVAL; spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; - if (command) - in_ctx = command->in_ctx; - else - in_ctx = virt_dev->in_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); if (!ctrl_ctx) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -2607,7 +2618,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return -ENOMEM; } if ((xhci->quirks & XHCI_SW_BW_CHECKING) && - xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) { + xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) { if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); spin_unlock_irqrestore(&xhci->lock, flags); @@ -2615,27 +2626,18 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return -ENOMEM; } - if (command) { - cmd_completion = command->completion; - cmd_status = &command->status; - command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); - list_add_tail(&command->cmd_list, &virt_dev->cmd_list); - } else { - cmd_completion = &virt_dev->cmd_completion; - cmd_status = &virt_dev->cmd_status; - } - init_completion(cmd_completion); + list_add_tail(&command->cmd_list, &virt_dev->cmd_list); - cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); if (!ctx_change) - ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, + ret = xhci_queue_configure_endpoint(xhci, command, + command->in_ctx->dma, udev->slot_id, must_succeed); else - ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, + ret = xhci_queue_evaluate_context(xhci, command, + command->in_ctx->dma, udev->slot_id, must_succeed); if (ret < 0) { - if (command) - list_del(&command->cmd_list); + list_del(&command->cmd_list); if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); spin_unlock_irqrestore(&xhci->lock, flags); @@ -2648,7 +2650,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, /* Wait for the configure endpoint command to complete */ timeleft = wait_for_completion_interruptible_timeout( - cmd_completion, + command->completion, XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for %s command\n", @@ -2657,16 +2659,18 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, "configure endpoint" : "evaluate context"); /* cancel the configure endpoint command */ - ret = xhci_cancel_cmd(xhci, command, cmd_trb); + ret = xhci_cancel_cmd(xhci, command, command->command_trb); if (ret < 0) return ret; return -ETIME; } if (!ctx_change) - ret = xhci_configure_endpoint_result(xhci, udev, cmd_status); + ret = xhci_configure_endpoint_result(xhci, udev, + &command->status); else - ret = xhci_evaluate_context_result(xhci, udev, cmd_status); + ret = xhci_evaluate_context_result(xhci, udev, + &command->status); if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { spin_lock_irqsave(&xhci->lock, flags); @@ -2714,6 +2718,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_virt_device *virt_dev; struct xhci_input_control_ctx *ctrl_ctx; struct xhci_slot_ctx *slot_ctx; + struct xhci_command *command; ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); if (ret <= 0) @@ -2725,12 +2730,19 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); virt_dev = xhci->devs[udev->slot_id]; + command = xhci_alloc_command(xhci, false, true, GFP_KERNEL); + if (!command) + return -ENOMEM; + + command->in_ctx = virt_dev->in_ctx; + /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto command_cleanup; } ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG); @@ -2738,20 +2750,20 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Don't issue the command if there's no endpoints to update. */ if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && - ctrl_ctx->drop_flags == 0) - return 0; - + ctrl_ctx->drop_flags == 0) { + ret = 0; + goto command_cleanup; + } xhci_dbg(xhci, "New Input Control Context:\n"); slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); xhci_dbg_ctx(xhci, virt_dev->in_ctx, LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); - ret = xhci_configure_endpoint(xhci, udev, NULL, + ret = xhci_configure_endpoint(xhci, udev, command, false, false); - if (ret) { + if (ret) /* Callee should call reset_bandwidth() */ - return ret; - } + goto command_cleanup; xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); xhci_dbg_ctx(xhci, virt_dev->out_ctx, @@ -2783,6 +2795,9 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; virt_dev->eps[i].new_ring = NULL; } +command_cleanup: + kfree(command->completion); + kfree(command); return ret; } @@ -2884,9 +2899,14 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, * issue a configure endpoint command later. */ if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { + struct xhci_command *command; + /* Can't sleep if we're called from cleanup_halted_endpoint() */ + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + if (!command) + return; xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, "Queueing new dequeue state"); - xhci_queue_new_dequeue_state(xhci, udev->slot_id, + xhci_queue_new_dequeue_state(xhci, command, udev->slot_id, ep_index, ep->stopped_stream, &deq_state); } else { /* Better hope no one uses the input context between now and the @@ -2917,6 +2937,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, unsigned long flags; int ret; struct xhci_virt_ep *virt_ep; + struct xhci_command *command; xhci = hcd_to_xhci(hcd); udev = (struct usb_device *) ep->hcpriv; @@ -2939,10 +2960,14 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, return; } + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + if (!command) + return; + xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, "Queueing reset endpoint command"); spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index); + ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); /* * Can't change the ring dequeue pointer until it's transitioned to the * stopped state, which is only upon a successful reset endpoint @@ -3473,10 +3498,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); - reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); - ret = xhci_queue_reset_device(xhci, slot_id); + ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id); if (ret) { xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); list_del(&reset_device_cmd->cmd_list); @@ -3589,6 +3613,11 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; u32 state; int i, ret; + struct xhci_command *command; + + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return; #ifndef CONFIG_USB_DEFAULT_PERSIST /* @@ -3604,8 +3633,10 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) /* If the host is halted due to driver unload, we still need to free the * device. */ - if (ret <= 0 && ret != -ENODEV) + if (ret <= 0 && ret != -ENODEV) { + kfree(command); return; + } virt_dev = xhci->devs[udev->slot_id]; @@ -3622,16 +3653,19 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_free_virt_device(xhci, udev->slot_id); spin_unlock_irqrestore(&xhci->lock, flags); + kfree(command); return; } - if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) { + if (xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, + udev->slot_id)) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); return; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); + /* * Event command completion handler will free any data structures * associated with the slot. XXX Can free sleep? @@ -3671,27 +3705,35 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; int timeleft; int ret; - union xhci_trb *cmd_trb; + struct xhci_command *command; + + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return 0; spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); - ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); + command->completion = &xhci->addr_dev; + ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + kfree(command); return 0; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); /* XXX: how much time for xHC slot assignment? */ - timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, + timeleft = wait_for_completion_interruptible_timeout( + command->completion, XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for a slot\n", timeleft == 0 ? "Timeout" : "Signal"); /* cancel the enable slot request */ - return xhci_cancel_cmd(xhci, NULL, cmd_trb); + ret = xhci_cancel_cmd(xhci, NULL, command->command_trb); + kfree(command); + return ret; } if (!xhci->slot_id) { @@ -3699,6 +3741,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", HCS_MAX_SLOTS( readl(&xhci->cap_regs->hcs_params1))); + kfree(command); return 0; } @@ -3733,6 +3776,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) pm_runtime_get_noresume(hcd->self.controller); #endif + + kfree(command); /* Is this a LS or FS device under a HS hub? */ /* Hub or peripherial? */ return 1; @@ -3740,7 +3785,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) disable_slot: /* Disable slot, if we can do it without mem alloc */ spin_lock_irqsave(&xhci->lock, flags); - if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) + command->completion = NULL; + command->status = 0; + if (!xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, + udev->slot_id)) xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); return 0; @@ -3764,7 +3812,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; - union xhci_trb *cmd_trb; + struct xhci_command *command; if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, @@ -3785,11 +3833,19 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, return -EINVAL; } + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return -ENOMEM; + + command->in_ctx = virt_dev->in_ctx; + command->completion = &xhci->addr_dev; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); + kfree(command); return -EINVAL; } /* @@ -3811,21 +3867,21 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, le32_to_cpu(slot_ctx->dev_info) >> 27); spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); - ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, + ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma, udev->slot_id, setup); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "FIXME: allocate a command ring segment"); + kfree(command); return ret; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ - timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - XHCI_CMD_DEFAULT_TIMEOUT); + timeleft = wait_for_completion_interruptible_timeout( + command->completion, XHCI_CMD_DEFAULT_TIMEOUT); /* FIXME: From section 4.3.4: "Software shall be responsible for timing * the SetAddress() "recovery interval" required by USB and aborting the * command on a timeout. @@ -3834,7 +3890,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, xhci_warn(xhci, "%s while waiting for setup %s command\n", timeleft == 0 ? "Timeout" : "Signal", act); /* cancel the address device command */ - ret = xhci_cancel_cmd(xhci, NULL, cmd_trb); + ret = xhci_cancel_cmd(xhci, NULL, command->command_trb); + kfree(command); if (ret < 0) return ret; return -ETIME; @@ -3871,6 +3928,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, break; } if (ret) { + kfree(command); return ret; } temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); @@ -3905,7 +3963,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Internal device address = %d", le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); - + kfree(command); return 0; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index cc67c7686706..c0fdb4984b0d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1807,13 +1807,14 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, dma_addr_t suspect_dma); int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); -int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); -int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, enum xhci_setup_dev); -int xhci_queue_vendor_command(struct xhci_hcd *xhci, +int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 trb_type, u32 slot_id); +int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev); +int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd, u32 field1, u32 field2, u32 field3, u32 field4); -int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index, int suspend); +int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index, int suspend); int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, @@ -1822,18 +1823,21 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); -int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, bool command_must_succeed); -int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, bool command_must_succeed); -int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index); -int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); +int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, + struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id, + bool command_must_succeed); +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); +int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index); +int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 slot_id); void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_td *cur_td, struct xhci_dequeue_state *state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, + struct xhci_command *cmd, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_dequeue_state *deq_state); @@ -1847,7 +1851,6 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, union xhci_trb *cmd_trb); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); -union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring); /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, From c9aa1a2de4cbf7d0db6012fbf86b6ee0c3719470 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 8 May 2014 19:26:01 +0300 Subject: [PATCH 141/314] xhci: Add a global command queue Create a list to store command structures, add a structure to it every time a command is submitted, and remove it from the list once we get a command completion event matching the command. Callers that wait for completion will free their command structures themselves. The other command structures are freed in the command completion event handler. Also add a check that prevents queuing commands if host is dying Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 ++ drivers/usb/host/xhci-ring.c | 34 ++++++++++++++++++++++++++++++---- drivers/usb/host/xhci.c | 2 -- drivers/usb/host/xhci.h | 2 ++ 4 files changed, 34 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index c089668308ad..b070a17bf53f 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1821,6 +1821,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) list_del(&cur_cd->cancel_cmd_list); kfree(cur_cd); } + xhci_cleanup_command_queue(xhci); for (i = 1; i < MAX_HC_SLOTS; ++i) xhci_free_virt_device(xhci, i); @@ -2324,6 +2325,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) int i; INIT_LIST_HEAD(&xhci->cancel_cmd_list); + INIT_LIST_HEAD(&xhci->cmd_list); page_size = readl(&xhci->op_regs->page_size); xhci_dbg_trace(xhci, trace_xhci_dbg_init, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b172a7dee6ac..89b874567548 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1520,6 +1520,20 @@ static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci, NEC_FW_MINOR(le32_to_cpu(event->status))); } +static void xhci_del_and_free_cmd(struct xhci_command *cmd) +{ + list_del(&cmd->cmd_list); + if (!cmd->completion) + kfree(cmd); +} + +void xhci_cleanup_command_queue(struct xhci_hcd *xhci) +{ + struct xhci_command *cur_cmd, *tmp_cmd; + list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list) + xhci_del_and_free_cmd(cur_cmd); +} + static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { @@ -1528,6 +1542,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, dma_addr_t cmd_dequeue_dma; u32 cmd_comp_code; union xhci_trb *cmd_trb; + struct xhci_command *cmd; u32 cmd_type; cmd_dma = le64_to_cpu(event->cmd_trb); @@ -1545,6 +1560,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, return; } + cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list); + + if (cmd->command_trb != xhci->cmd_ring->dequeue) { + xhci_err(xhci, + "Command completion event does not match command\n"); + return; + } trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); @@ -1614,6 +1636,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci->error_bitmask |= 1 << 6; break; } + + xhci_del_and_free_cmd(cmd); + inc_deq(xhci, xhci->cmd_ring); } @@ -3998,6 +4023,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, { int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ESHUTDOWN; if (!command_must_succeed) reserved_trbs++; @@ -4011,10 +4038,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, "unfailable commands failed.\n"); return ret; } - if (cmd->completion) - cmd->command_trb = xhci->cmd_ring->enqueue; - else - kfree(cmd); + + cmd->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&cmd->cmd_list, &xhci->cmd_list); queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9a4c6dfa26dc..8dbc41032177 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3732,7 +3732,6 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) timeleft == 0 ? "Timeout" : "Signal"); /* cancel the enable slot request */ ret = xhci_cancel_cmd(xhci, NULL, command->command_trb); - kfree(command); return ret; } @@ -3891,7 +3890,6 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, timeleft == 0 ? "Timeout" : "Signal", act); /* cancel the address device command */ ret = xhci_cancel_cmd(xhci, NULL, command->command_trb); - kfree(command); if (ret < 0) return ret; return -ETIME; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c0fdb4984b0d..d33cd3750a15 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1484,6 +1484,7 @@ struct xhci_hcd { #define CMD_RING_STATE_ABORTED (1 << 1) #define CMD_RING_STATE_STOPPED (1 << 2) struct list_head cancel_cmd_list; + struct list_head cmd_list; unsigned int cmd_ring_reserved_trbs; struct xhci_ring *event_ring; struct xhci_erst erst; @@ -1851,6 +1852,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, union xhci_trb *cmd_trb); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); +void xhci_cleanup_command_queue(struct xhci_hcd *xhci); /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, From 9ea1833e4c210ac5580f63495be15502f275c578 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 8 May 2014 19:26:02 +0300 Subject: [PATCH 142/314] xhci: Use completion and status in global command queue Remove the per-device command list and handle_cmd_in_cmd_wait_list() and use the completion and status variables found in the command structure in the global command list. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 11 ----- drivers/usb/host/xhci-mem.c | 1 - drivers/usb/host/xhci-ring.c | 84 +++++++----------------------------- drivers/usb/host/xhci.c | 16 +------ drivers/usb/host/xhci.h | 3 -- 5 files changed, 17 insertions(+), 98 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 3ce9c0ac2614..12871b5d4a2e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -299,7 +299,6 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) suspend); } } - list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -311,18 +310,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for stop endpoint command\n", timeleft == 0 ? "Timeout" : "Signal"); - spin_lock_irqsave(&xhci->lock, flags); - /* The timeout might have raced with the event ring handler, so - * only delete from the list if the item isn't poisoned. - */ - if (cmd->cmd_list.next != LIST_POISON1) - list_del(&cmd->cmd_list); - spin_unlock_irqrestore(&xhci->lock, flags); ret = -ETIME; - goto command_cleanup; } - -command_cleanup: xhci_free_command(xhci, cmd); return ret; } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index b070a17bf53f..38dc721bc8bb 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1020,7 +1020,6 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, dev->num_rings_cached = 0; init_completion(&dev->cmd_completion); - INIT_LIST_HEAD(&dev->cmd_list); dev->udev = udev; /* Point to output device context in dcbaa. */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 89b874567548..3d60865a3d8f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -69,10 +69,6 @@ #include "xhci.h" #include "xhci-trace.h" -static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, - struct xhci_virt_device *virt_dev, - struct xhci_event_cmd *event); - /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA * address of the TRB. @@ -765,7 +761,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, union xhci_trb *trb, struct xhci_event_cmd *event) { unsigned int ep_index; - struct xhci_virt_device *virt_dev; struct xhci_ring *ep_ring; struct xhci_virt_ep *ep; struct list_head *entry; @@ -775,11 +770,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, struct xhci_dequeue_state deq_state; if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) { - virt_dev = xhci->devs[slot_id]; - if (virt_dev) - handle_cmd_in_cmd_wait_list(xhci, virt_dev, - event); - else + if (!xhci->devs[slot_id]) xhci_warn(xhci, "Stop endpoint command " "completion for disabled slot %u\n", slot_id); @@ -1229,29 +1220,6 @@ static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, } -/* Check to see if a command in the device's command queue matches this one. - * Signal the completion or free the command, and return 1. Return 0 if the - * completed command isn't at the head of the command list. - */ -static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, - struct xhci_virt_device *virt_dev, - struct xhci_event_cmd *event) -{ - struct xhci_command *command; - - if (list_empty(&virt_dev->cmd_list)) - return 0; - - command = list_entry(virt_dev->cmd_list.next, - struct xhci_command, cmd_list); - if (xhci->cmd_ring->dequeue != command->command_trb) - return 0; - - xhci_complete_cmd_in_cmd_wait_list(xhci, command, - GET_COMP_CODE(le32_to_cpu(event->status))); - return 1; -} - /* * Finding the command trb need to be cancelled and modifying it to * NO OP command. And if the command is in device's command wait @@ -1403,7 +1371,6 @@ static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id, xhci->slot_id = slot_id; else xhci->slot_id = 0; - complete(&xhci->addr_dev); } static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id) @@ -1428,9 +1395,6 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_state; u32 add_flags, drop_flags; - virt_dev = xhci->devs[slot_id]; - if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) - return; /* * Configure endpoint commands can come from the USB core * configuration or alt setting changes, or because the HW @@ -1439,6 +1403,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, * If the command was for a halted endpoint, the xHCI driver * is not waiting on the configure endpoint command. */ + virt_dev = xhci->devs[slot_id]; ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "Could not get input context, bad type.\n"); @@ -1474,35 +1439,11 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, return; } -static void xhci_handle_cmd_eval_ctx(struct xhci_hcd *xhci, int slot_id, - struct xhci_event_cmd *event, u32 cmd_comp_code) -{ - struct xhci_virt_device *virt_dev; - - virt_dev = xhci->devs[slot_id]; - if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) - return; - virt_dev->cmd_status = cmd_comp_code; - complete(&virt_dev->cmd_completion); -} - -static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id, - u32 cmd_comp_code) -{ - xhci->devs[slot_id]->cmd_status = cmd_comp_code; - complete(&xhci->addr_dev); -} - static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id, struct xhci_event_cmd *event) { - struct xhci_virt_device *virt_dev; - xhci_dbg(xhci, "Completed reset device command.\n"); - virt_dev = xhci->devs[slot_id]; - if (virt_dev) - handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); - else + if (!xhci->devs[slot_id]) xhci_warn(xhci, "Reset device command completion " "for disabled slot %u\n", slot_id); } @@ -1520,18 +1461,23 @@ static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci, NEC_FW_MINOR(le32_to_cpu(event->status))); } -static void xhci_del_and_free_cmd(struct xhci_command *cmd) +static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status) { list_del(&cmd->cmd_list); - if (!cmd->completion) + + if (cmd->completion) { + cmd->status = status; + complete(cmd->completion); + } else { kfree(cmd); + } } void xhci_cleanup_command_queue(struct xhci_hcd *xhci) { struct xhci_command *cur_cmd, *tmp_cmd; list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list) - xhci_del_and_free_cmd(cur_cmd); + xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT); } static void handle_cmd_completion(struct xhci_hcd *xhci, @@ -1598,13 +1544,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_disable_slot(xhci, slot_id); break; case TRB_CONFIG_EP: - xhci_handle_cmd_config_ep(xhci, slot_id, event, cmd_comp_code); + if (!cmd->completion) + xhci_handle_cmd_config_ep(xhci, slot_id, event, + cmd_comp_code); break; case TRB_EVAL_CONTEXT: - xhci_handle_cmd_eval_ctx(xhci, slot_id, event, cmd_comp_code); break; case TRB_ADDR_DEV: - xhci_handle_cmd_addr_dev(xhci, slot_id, cmd_comp_code); break; case TRB_STOP_RING: WARN_ON(slot_id != TRB_TO_SLOT_ID( @@ -1637,7 +1583,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, break; } - xhci_del_and_free_cmd(cmd); + xhci_complete_del_and_free_cmd(cmd, cmd_comp_code); inc_deq(xhci, xhci->cmd_ring); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8dbc41032177..64c1ba353856 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2626,8 +2626,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return -ENOMEM; } - list_add_tail(&command->cmd_list, &virt_dev->cmd_list); - if (!ctx_change) ret = xhci_queue_configure_endpoint(xhci, command, command->in_ctx->dma, @@ -2637,7 +2635,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, command->in_ctx->dma, udev->slot_id, must_succeed); if (ret < 0) { - list_del(&command->cmd_list); if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); spin_unlock_irqrestore(&xhci->lock, flags); @@ -3499,11 +3496,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); - list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id); if (ret) { xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); - list_del(&reset_device_cmd->cmd_list); spin_unlock_irqrestore(&xhci->lock, flags); goto command_cleanup; } @@ -3517,13 +3512,6 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for reset device command\n", timeleft == 0 ? "Timeout" : "Signal"); - spin_lock_irqsave(&xhci->lock, flags); - /* The timeout might have raced with the event ring handler, so - * only delete from the list if the item isn't poisoned. - */ - if (reset_device_cmd->cmd_list.next != LIST_POISON1) - list_del(&reset_device_cmd->cmd_list); - spin_unlock_irqrestore(&xhci->lock, flags); ret = -ETIME; goto command_cleanup; } @@ -3895,7 +3883,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, return -ETIME; } - switch (virt_dev->cmd_status) { + switch (command->status) { case COMP_CTX_STATE: case COMP_EBADSLT: xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n", @@ -3918,7 +3906,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, default: xhci_err(xhci, "ERROR: unexpected setup %s command completion code 0x%x.\n", - act, virt_dev->cmd_status); + act, command->status); xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d33cd3750a15..fde57b09a9bd 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -937,9 +937,6 @@ struct xhci_virt_device { #define XHCI_MAX_RINGS_CACHED 31 struct xhci_virt_ep eps[31]; struct completion cmd_completion; - /* Status of the last command issued for this device */ - u32 cmd_status; - struct list_head cmd_list; u8 fake_port; u8 real_port; struct xhci_interval_bw_table *bw_table; From c311e391a7efd101250c0e123286709b7e736249 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 8 May 2014 19:26:03 +0300 Subject: [PATCH 143/314] xhci: rework command timeout and cancellation, Use one timer to control command timeout. start/kick the timer every time a command is completed and a new command is waiting, or a new command is added to a empty list. If the timer runs out, then tag the current command as "aborted", and start the xhci command abortion process. Previously each function that submitted a command had its own timer. If that command timed out, a new command structure for the command was created and it was put on a cancel_cmd_list list, then a pci write to abort the command ring was issued. when the ring was aborted, it checked if the current command was the one to be canceled, later when the ring was stopped the driver got ownership of the TRBs in the command ring, compared then to the TRBs in the cancel_cmd_list, and turned them into No-ops. Now, instead, at timeout we tag the status of the command in the command queue to be aborted, and start the ring abortion. Ring abortion stops the command ring and gives control of the commands to us. All the aborted commands are now turned into No-ops. If the ring is already stopped when the command times outs its not possible to start the ring abortion, in this case the command is turnd to No-op right away. All these changes allows us to remove the entire cancel_cmd_list code. The functions waiting for a command to finish no longer have their own timeouts. They will wait either until the command completes normally, or until the whole command abortion is done. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 11 +- drivers/usb/host/xhci-mem.c | 14 +- drivers/usb/host/xhci-ring.c | 378 ++++++++++++----------------------- drivers/usb/host/xhci.c | 78 +++----- drivers/usb/host/xhci.h | 8 +- 5 files changed, 169 insertions(+), 320 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 12871b5d4a2e..6231ce6aa0c3 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -271,7 +271,6 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) struct xhci_virt_device *virt_dev; struct xhci_command *cmd; unsigned long flags; - int timeleft; int ret; int i; @@ -304,12 +303,10 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) spin_unlock_irqrestore(&xhci->lock, flags); /* Wait for last stop endpoint command to finish */ - timeleft = wait_for_completion_interruptible_timeout( - cmd->completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for stop endpoint command\n", - timeleft == 0 ? "Timeout" : "Signal"); + wait_for_completion(cmd->completion); + + if (cmd->status == COMP_CMD_ABORT || cmd->status == COMP_CMD_STOP) { + xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; } xhci_free_command(xhci, cmd); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 38dc721bc8bb..6a57e81c2a76 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1793,10 +1793,11 @@ void xhci_free_command(struct xhci_hcd *xhci, void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct device *dev = xhci_to_hcd(xhci)->self.controller; - struct xhci_cd *cur_cd, *next_cd; int size; int i, j, num_ports; + del_timer_sync(&xhci->cmd_timer); + /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) @@ -1815,11 +1816,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed command ring"); - list_for_each_entry_safe(cur_cd, next_cd, - &xhci->cancel_cmd_list, cancel_cmd_list) { - list_del(&cur_cd->cancel_cmd_list); - kfree(cur_cd); - } xhci_cleanup_command_queue(xhci); for (i = 1; i < MAX_HC_SLOTS; ++i) @@ -2323,7 +2319,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); INIT_LIST_HEAD(&xhci->cmd_list); page_size = readl(&xhci->op_regs->page_size); @@ -2510,6 +2505,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) "Wrote ERST address to ir_set 0."); xhci_print_ir_set(xhci, 0); + /* init command timeout timer */ + init_timer(&xhci->cmd_timer); + xhci->cmd_timer.data = (unsigned long) xhci; + xhci->cmd_timer.function = xhci_handle_command_timeout; + /* * XXX: Might need to set the Interrupter Moderation Register to * something other than the default (~1ms minimum between interrupts). diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3d60865a3d8f..d67ff71209f5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -287,17 +287,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) xhci_dbg(xhci, "Abort command ring\n"); - if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) { - xhci_dbg(xhci, "The command ring isn't running, " - "Have the command ring been stopped?\n"); - return 0; - } - temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - if (!(temp_64 & CMD_RING_RUNNING)) { - xhci_dbg(xhci, "Command ring had been stopped\n"); - return 0; - } xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -323,71 +313,6 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) return 0; } -static int xhci_queue_cd(struct xhci_hcd *xhci, - struct xhci_command *command, - union xhci_trb *cmd_trb) -{ - struct xhci_cd *cd; - cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC); - if (!cd) - return -ENOMEM; - INIT_LIST_HEAD(&cd->cancel_cmd_list); - - cd->command = command; - cd->cmd_trb = cmd_trb; - list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list); - - return 0; -} - -/* - * Cancel the command which has issue. - * - * Some commands may hang due to waiting for acknowledgement from - * usb device. It is outside of the xHC's ability to control and - * will cause the command ring is blocked. When it occurs software - * should intervene to recover the command ring. - * See Section 4.6.1.1 and 4.6.1.2 - */ -int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, - union xhci_trb *cmd_trb) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&xhci->lock, flags); - - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_warn(xhci, "Abort the command ring," - " but the xHCI is dead.\n"); - retval = -ESHUTDOWN; - goto fail; - } - - /* queue the cmd desriptor to cancel_cmd_list */ - retval = xhci_queue_cd(xhci, command, cmd_trb); - if (retval) { - xhci_warn(xhci, "Queuing command descriptor failed.\n"); - goto fail; - } - - /* abort command ring */ - retval = xhci_abort_cmd_ring(xhci); - if (retval) { - xhci_err(xhci, "Abort command ring failed\n"); - if (unlikely(retval == -ESHUTDOWN)) { - spin_unlock_irqrestore(&xhci->lock, flags); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); - xhci_dbg(xhci, "xHCI host controller is dead.\n"); - return retval; - } - } - -fail: - spin_unlock_irqrestore(&xhci->lock, flags); - return retval; -} - void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, @@ -1206,164 +1131,6 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, } } -/* Complete the command and detele it from the devcie's command queue. - */ -static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, - struct xhci_command *command, u32 status) -{ - command->status = status; - list_del(&command->cmd_list); - if (command->completion) - complete(command->completion); - else - xhci_free_command(xhci, command); -} - - -/* - * Finding the command trb need to be cancelled and modifying it to - * NO OP command. And if the command is in device's command wait - * list, finishing and freeing it. - * - * If we can't find the command trb, we think it had already been - * executed. - */ -static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) -{ - struct xhci_segment *cur_seg; - union xhci_trb *cmd_trb; - u32 cycle_state; - - if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) - return; - - /* find the current segment of command ring */ - cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, - xhci->cmd_ring->dequeue, &cycle_state); - - if (!cur_seg) { - xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n", - xhci->cmd_ring->dequeue, - (unsigned long long) - xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, - xhci->cmd_ring->dequeue)); - xhci_debug_ring(xhci, xhci->cmd_ring); - xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); - return; - } - - /* find the command trb matched by cd from command ring */ - for (cmd_trb = xhci->cmd_ring->dequeue; - cmd_trb != xhci->cmd_ring->enqueue; - next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) { - /* If the trb is link trb, continue */ - if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3])) - continue; - - if (cur_cd->cmd_trb == cmd_trb) { - - /* If the command in device's command list, we should - * finish it and free the command structure. - */ - if (cur_cd->command) - xhci_complete_cmd_in_cmd_wait_list(xhci, - cur_cd->command, COMP_CMD_STOP); - - /* get cycle state from the origin command trb */ - cycle_state = le32_to_cpu(cmd_trb->generic.field[3]) - & TRB_CYCLE; - - /* modify the command trb to NO OP command */ - cmd_trb->generic.field[0] = 0; - cmd_trb->generic.field[1] = 0; - cmd_trb->generic.field[2] = 0; - cmd_trb->generic.field[3] = cpu_to_le32( - TRB_TYPE(TRB_CMD_NOOP) | cycle_state); - break; - } - } -} - -static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci) -{ - struct xhci_cd *cur_cd, *next_cd; - - if (list_empty(&xhci->cancel_cmd_list)) - return; - - list_for_each_entry_safe(cur_cd, next_cd, - &xhci->cancel_cmd_list, cancel_cmd_list) { - xhci_cmd_to_noop(xhci, cur_cd); - list_del(&cur_cd->cancel_cmd_list); - kfree(cur_cd); - } -} - -/* - * traversing the cancel_cmd_list. If the command descriptor according - * to cmd_trb is found, the function free it and return 1, otherwise - * return 0. - */ -static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci, - union xhci_trb *cmd_trb) -{ - struct xhci_cd *cur_cd, *next_cd; - - if (list_empty(&xhci->cancel_cmd_list)) - return 0; - - list_for_each_entry_safe(cur_cd, next_cd, - &xhci->cancel_cmd_list, cancel_cmd_list) { - if (cur_cd->cmd_trb == cmd_trb) { - if (cur_cd->command) - xhci_complete_cmd_in_cmd_wait_list(xhci, - cur_cd->command, COMP_CMD_STOP); - list_del(&cur_cd->cancel_cmd_list); - kfree(cur_cd); - return 1; - } - } - - return 0; -} - -/* - * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the - * trb pointed by the command ring dequeue pointer is the trb we want to - * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will - * traverse the cancel_cmd_list to trun the all of the commands according - * to command descriptor to NO-OP trb. - */ -static int handle_stopped_cmd_ring(struct xhci_hcd *xhci, - int cmd_trb_comp_code) -{ - int cur_trb_is_good = 0; - - /* Searching the cmd trb pointed by the command ring dequeue - * pointer in command descriptor list. If it is found, free it. - */ - cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci, - xhci->cmd_ring->dequeue); - - if (cmd_trb_comp_code == COMP_CMD_ABORT) - xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - else if (cmd_trb_comp_code == COMP_CMD_STOP) { - /* traversing the cancel_cmd_list and canceling - * the command according to command descriptor - */ - xhci_cancel_cmd_in_cd_list(xhci); - - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - /* - * ring command ring doorbell again to restart the - * command ring - */ - if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) - xhci_ring_cmd_db(xhci); - } - return cur_trb_is_good; -} - static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id, u32 cmd_comp_code) { @@ -1480,6 +1247,97 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci) xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT); } +/* + * Turn all commands on command ring with status set to "aborted" to no-op trbs. + * If there are other commands waiting then restart the ring and kick the timer. + * This must be called with command ring stopped and xhci->lock held. + */ +static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, + struct xhci_command *cur_cmd) +{ + struct xhci_command *i_cmd, *tmp_cmd; + u32 cycle_state; + + /* Turn all aborted commands in list to no-ops, then restart */ + list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list, + cmd_list) { + + if (i_cmd->status != COMP_CMD_ABORT) + continue; + + i_cmd->status = COMP_CMD_STOP; + + xhci_dbg(xhci, "Turn aborted command %p to no-op\n", + i_cmd->command_trb); + /* get cycle state from the original cmd trb */ + cycle_state = le32_to_cpu( + i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; + /* modify the command trb to no-op command */ + i_cmd->command_trb->generic.field[0] = 0; + i_cmd->command_trb->generic.field[1] = 0; + i_cmd->command_trb->generic.field[2] = 0; + i_cmd->command_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + + /* + * caller waiting for completion is called when command + * completion event is received for these no-op commands + */ + } + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + + /* ring command ring doorbell to restart the command ring */ + if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && + !(xhci->xhc_state & XHCI_STATE_DYING)) { + xhci->current_cmd = cur_cmd; + mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_ring_cmd_db(xhci); + } + return; +} + + +void xhci_handle_command_timeout(unsigned long data) +{ + struct xhci_hcd *xhci; + int ret; + unsigned long flags; + u64 hw_ring_state; + struct xhci_command *cur_cmd = NULL; + xhci = (struct xhci_hcd *) data; + + /* mark this command to be cancelled */ + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->current_cmd) { + cur_cmd = xhci->current_cmd; + cur_cmd->status = COMP_CMD_ABORT; + } + + + /* Make sure command ring is running before aborting it */ + hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && + (hw_ring_state & CMD_RING_RUNNING)) { + + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Command timeout\n"); + ret = xhci_abort_cmd_ring(xhci); + if (unlikely(ret == -ESHUTDOWN)) { + xhci_err(xhci, "Abort command ring failed\n"); + xhci_cleanup_command_queue(xhci); + usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + xhci_dbg(xhci, "xHCI host controller is dead.\n"); + } + return; + } + /* command timeout on stopped ring, ring can't be aborted */ + xhci_dbg(xhci, "Command timeout on stopped ring\n"); + xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); + spin_unlock_irqrestore(&xhci->lock, flags); + return; +} + static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { @@ -1513,26 +1371,28 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, "Command completion event does not match command\n"); return; } + + del_timer(&xhci->cmd_timer); + trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); - if (cmd_comp_code == COMP_CMD_ABORT || cmd_comp_code == COMP_CMD_STOP) { - /* If the return value is 0, we think the trb pointed by - * command ring dequeue pointer is a good trb. The good - * trb means we don't want to cancel the trb, but it have - * been stopped by host. So we should handle it normally. - * Otherwise, driver should invoke inc_deq() and return. - */ - if (handle_stopped_cmd_ring(xhci, cmd_comp_code)) { - inc_deq(xhci, xhci->cmd_ring); - return; - } - /* There is no command to handle if we get a stop event when the - * command ring is empty, event->cmd_trb points to the next - * unset command - */ - if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) - return; + + /* If CMD ring stopped we own the trbs between enqueue and dequeue */ + if (cmd_comp_code == COMP_CMD_STOP) { + xhci_handle_stopped_cmd_ring(xhci, cmd); + return; + } + /* + * Host aborted the command ring, check if the current command was + * supposed to be aborted, otherwise continue normally. + * The command ring is stopped now, but the xHC will issue a Command + * Ring Stopped event which will cause us to restart it. + */ + if (cmd_comp_code == COMP_CMD_ABORT) { + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + if (cmd->status == COMP_CMD_ABORT) + goto event_handled; } cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); @@ -1563,6 +1423,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code); break; case TRB_CMD_NOOP: + /* Is this an aborted command turned to NO-OP? */ + if (cmd->status == COMP_CMD_STOP) + cmd_comp_code = COMP_CMD_STOP; break; case TRB_RESET_EP: WARN_ON(slot_id != TRB_TO_SLOT_ID( @@ -1583,6 +1446,14 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, break; } + /* restart timer if this wasn't the last command */ + if (cmd->cmd_list.next != &xhci->cmd_list) { + xhci->current_cmd = list_entry(cmd->cmd_list.next, + struct xhci_command, cmd_list); + mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + } + +event_handled: xhci_complete_del_and_free_cmd(cmd, cmd_comp_code); inc_deq(xhci, xhci->cmd_ring); @@ -3988,6 +3859,13 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, cmd->command_trb = xhci->cmd_ring->enqueue; list_add_tail(&cmd->cmd_list, &xhci->cmd_list); + /* if there are no other commands queued we start the timeout timer */ + if (xhci->cmd_list.next == &cmd->cmd_list && + !timer_pending(&xhci->cmd_timer)) { + xhci->current_cmd = cmd; + mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + } + queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); return 0; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 64c1ba353856..2b8d9a24af09 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1820,6 +1820,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, int ret; switch (*cmd_status) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n"); + ret = -ETIME; + break; case COMP_ENOMEM: dev_warn(&udev->dev, "Not enough host controller resources " "for new device state.\n"); @@ -1866,6 +1871,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; switch (*cmd_status) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout while waiting for evaluate context command\n"); + ret = -ETIME; + break; case COMP_EINVAL: dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate " "context command.\n"); @@ -2590,7 +2600,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, bool ctx_change, bool must_succeed) { int ret; - int timeleft; unsigned long flags; struct xhci_input_control_ctx *ctrl_ctx; struct xhci_virt_device *virt_dev; @@ -2646,21 +2655,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, spin_unlock_irqrestore(&xhci->lock, flags); /* Wait for the configure endpoint command to complete */ - timeleft = wait_for_completion_interruptible_timeout( - command->completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for %s command\n", - timeleft == 0 ? "Timeout" : "Signal", - ctx_change == 0 ? - "configure endpoint" : - "evaluate context"); - /* cancel the configure endpoint command */ - ret = xhci_cancel_cmd(xhci, command, command->command_trb); - if (ret < 0) - return ret; - return -ETIME; - } + wait_for_completion(command->completion); if (!ctx_change) ret = xhci_configure_endpoint_result(xhci, udev, @@ -3438,7 +3433,6 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) unsigned int slot_id; struct xhci_virt_device *virt_dev; struct xhci_command *reset_device_cmd; - int timeleft; int last_freed_endpoint; struct xhci_slot_ctx *slot_ctx; int old_active_eps = 0; @@ -3506,15 +3500,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) spin_unlock_irqrestore(&xhci->lock, flags); /* Wait for the Reset Device command to finish */ - timeleft = wait_for_completion_interruptible_timeout( - reset_device_cmd->completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for reset device command\n", - timeleft == 0 ? "Timeout" : "Signal"); - ret = -ETIME; - goto command_cleanup; - } + wait_for_completion(reset_device_cmd->completion); /* The Reset Device command can't fail, according to the 0.95/0.96 spec, * unless we tried to reset a slot ID that wasn't enabled, @@ -3522,6 +3508,11 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) */ ret = reset_device_cmd->status; switch (ret) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout waiting for reset device command\n"); + ret = -ETIME; + goto command_cleanup; case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ case COMP_CTX_STATE: /* 0.96 completion code for same thing */ xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n", @@ -3691,7 +3682,6 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); unsigned long flags; - int timeleft; int ret; struct xhci_command *command; @@ -3711,19 +3701,9 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); - /* XXX: how much time for xHC slot assignment? */ - timeleft = wait_for_completion_interruptible_timeout( - command->completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for a slot\n", - timeleft == 0 ? "Timeout" : "Signal"); - /* cancel the enable slot request */ - ret = xhci_cancel_cmd(xhci, NULL, command->command_trb); - return ret; - } + wait_for_completion(command->completion); - if (!xhci->slot_id) { + if (!xhci->slot_id || command->status != COMP_SUCCESS) { xhci_err(xhci, "Error while assigning device slot ID\n"); xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", HCS_MAX_SLOTS( @@ -3792,7 +3772,6 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, { const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address"; unsigned long flags; - int timeleft; struct xhci_virt_device *virt_dev; int ret = 0; struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -3867,23 +3846,18 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, spin_unlock_irqrestore(&xhci->lock, flags); /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ - timeleft = wait_for_completion_interruptible_timeout( - command->completion, XHCI_CMD_DEFAULT_TIMEOUT); + wait_for_completion(command->completion); + /* FIXME: From section 4.3.4: "Software shall be responsible for timing * the SetAddress() "recovery interval" required by USB and aborting the * command on a timeout. */ - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for setup %s command\n", - timeleft == 0 ? "Timeout" : "Signal", act); - /* cancel the address device command */ - ret = xhci_cancel_cmd(xhci, NULL, command->command_trb); - if (ret < 0) - return ret; - return -ETIME; - } - switch (command->status) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout while waiting for setup device command\n"); + ret = -ETIME; + break; case COMP_CTX_STATE: case COMP_EBADSLT: xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n", diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index fde57b09a9bd..2774526449a6 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1295,7 +1295,6 @@ struct xhci_td { /* command descriptor */ struct xhci_cd { - struct list_head cancel_cmd_list; struct xhci_command *command; union xhci_trb *cmd_trb; }; @@ -1480,9 +1479,10 @@ struct xhci_hcd { #define CMD_RING_STATE_RUNNING (1 << 0) #define CMD_RING_STATE_ABORTED (1 << 1) #define CMD_RING_STATE_STOPPED (1 << 2) - struct list_head cancel_cmd_list; struct list_head cmd_list; unsigned int cmd_ring_reserved_trbs; + struct timer_list cmd_timer; + struct xhci_command *current_cmd; struct xhci_ring *event_ring; struct xhci_erst erst; /* Scratchpad */ @@ -1845,8 +1845,8 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); -int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, - union xhci_trb *cmd_trb); +void xhci_handle_command_timeout(unsigned long data); + void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); void xhci_cleanup_command_queue(struct xhci_hcd *xhci); From 58ce8499d3a3690c8b547a0b21ca9304083cfb67 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 23 May 2014 08:12:47 +0800 Subject: [PATCH 144/314] usb: chipidea: update TODO list Update TODO list Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 128b92ba58a8..95b4dd731772 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -23,7 +23,7 @@ * - BUS: bus glue code, bus abstraction layer * * Compile Options - * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities + * - CONFIG_USB_CHIPIDEA_DEBUG: enable debug facilities * - STALL_IN: non-empty bulk-in pipes cannot be halted * if defined mass storage compliance succeeds but with warnings * => case 4: Hi > Dn @@ -42,9 +42,6 @@ * - Not Supported: 15 & 16 (ISO) * * TODO List - * - Interrupt Traffic - * - GET_STATUS(device) - always reports 0 - * - Gadget API (majority of optional features) * - Suspend & Remote Wakeup */ #include From 2dbd633f3a5ec60cec1bb33b86513d768730681b Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 23 May 2014 08:12:48 +0800 Subject: [PATCH 145/314] usb: chipidea: udc: delete useless code Delete useless code Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 150592f10b3d..d8ab4c190aa5 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -823,7 +823,6 @@ __acquires(hwep->lock) if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { /* Assume that device is bus powered for now. */ *(u16 *)req->buf = ci->remote_wakeup << 1; - retval = 0; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? From be6b0c1bd0be7a4f4d75ab40965abf1bd2d9a591 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 23 May 2014 08:12:49 +0800 Subject: [PATCH 146/314] usb: chipidea: using one inline function to cover queue work operations The otg queue work include operations: one is disable interrupt, another one is call kernel queue work API. Many codes do this operation, using one inline function to instead of them. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 6 +-- drivers/usb/chipidea/otg.h | 5 +++ drivers/usb/chipidea/otg_fsm.c | 69 ++++++++++++---------------------- 3 files changed, 30 insertions(+), 50 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 95b4dd731772..619d13e29995 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -425,8 +425,7 @@ static irqreturn_t ci_irq(int irq, void *data) ci->id_event = true; /* Clear ID change irq status */ hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); return IRQ_HANDLED; } @@ -438,8 +437,7 @@ static irqreturn_t ci_irq(int irq, void *data) ci->b_sess_valid_event = true; /* Clear BSV irq */ hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); return IRQ_HANDLED; } diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h index 734926754113..9ecb598e48f0 100644 --- a/drivers/usb/chipidea/otg.h +++ b/drivers/usb/chipidea/otg.h @@ -17,5 +17,10 @@ int ci_hdrc_otg_init(struct ci_hdrc *ci); void ci_hdrc_otg_destroy(struct ci_hdrc *ci); enum ci_role ci_otg_role(struct ci_hdrc *ci); void ci_handle_vbus_change(struct ci_hdrc *ci); +static inline void ci_otg_queue_work(struct ci_hdrc *ci) +{ + disable_irq_nosync(ci->irq); + queue_work(ci->wq, &ci->work); +} #endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */ diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 8d4c33dea12e..caaabc58021e 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -84,8 +84,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr, ci->fsm.a_bus_req = 1; } - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); mutex_unlock(&ci->fsm.lock); return count; @@ -125,8 +124,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr, ci->fsm.a_bus_req = 0; } - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); mutex_unlock(&ci->fsm.lock); return count; @@ -165,8 +163,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr, else if (buf[0] == '1') ci->fsm.b_bus_req = 1; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); mutex_unlock(&ci->fsm.lock); return count; @@ -186,8 +183,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr, if (buf[0] == '1') ci->fsm.a_clr_err = 1; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); mutex_unlock(&ci->fsm.lock); return count; @@ -297,8 +293,7 @@ static void set_tmout_and_fsm(void *ptr, unsigned long indicator) set_tmout(ci, indicator); - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator) @@ -312,8 +307,7 @@ static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator) hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS); /* Enable data pulse irq */ hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE); - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator) @@ -324,8 +318,7 @@ static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator) if (!hw_read_otgsc(ci, OTGSC_BSV)) ci->fsm.b_sess_vld = 0; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator) @@ -335,10 +328,8 @@ static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator) set_tmout(ci, indicator); /* only vbus fall below B_sess_vld in b_idle state */ - if (ci->transceiver->state == OTG_STATE_B_IDLE) { - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); - } + if (ci->transceiver->state == OTG_STATE_B_IDLE) + ci_otg_queue_work(ci); } static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator) @@ -349,8 +340,7 @@ static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator) if (!(hw_read_otgsc(ci, OTGSC_BSV))) { ci->fsm.b_sess_vld = 0; ci_otg_add_timer(ci, B_SSEND_SRP); - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } } @@ -365,8 +355,7 @@ static void b_data_pulse_end(void *ptr, unsigned long indicator) hw_write_otgsc(ci, OTGSC_HABA, 0); - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } /* Initialize timers */ @@ -607,10 +596,8 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) * a_idle to a_wait_vrise when power up */ if ((ci->fsm.id) || (ci->id_event) || - (ci->fsm.power_up)) { - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); - } + (ci->fsm.power_up)) + ci_otg_queue_work(ci); if (ci->id_event) ci->id_event = false; } else if (ci->transceiver->state == OTG_STATE_B_IDLE) { @@ -620,8 +607,7 @@ int ci_otg_fsm_work(struct ci_hdrc *ci) * Further transite to b_periphearl state * when register gadget driver with vbus on */ - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } } } @@ -646,22 +632,19 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci) if (port_conn) { fsm->b_conn = 1; fsm->a_bus_req = 1; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } break; case OTG_STATE_B_IDLE: if (otg_bsess_vld && (intr_sts & USBi_PCI) && port_conn) { fsm->b_sess_vld = 1; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } break; case OTG_STATE_B_PERIPHERAL: if ((intr_sts & USBi_SLI) && port_conn && otg_bsess_vld) { fsm->a_bus_suspend = 1; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } else if (intr_sts & USBi_PCI) { if (fsm->a_bus_suspend == 1) fsm->a_bus_suspend = 0; @@ -671,8 +654,7 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci) if ((intr_sts & USBi_PCI) && !port_conn) { fsm->a_conn = 0; fsm->b_bus_req = 0; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); ci_otg_add_timer(ci, B_SESS_VLD); } break; @@ -706,22 +688,19 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci) /* A device to be peripheral mode */ ci->gadget.is_a_peripheral = 1; } - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } break; case OTG_STATE_A_HOST: if ((intr_sts & USBi_PCI) && !port_conn) { fsm->b_conn = 0; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } break; case OTG_STATE_B_WAIT_ACON: if ((intr_sts & USBi_PCI) && port_conn) { fsm->a_conn = 1; - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } break; default: @@ -782,8 +761,7 @@ irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci) fsm->b_conn = 0; } } - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); return IRQ_HANDLED; } @@ -794,8 +772,7 @@ irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci) void ci_hdrc_otg_fsm_start(struct ci_hdrc *ci) { - disable_irq_nosync(ci->irq); - queue_work(ci->wq, &ci->work); + ci_otg_queue_work(ci); } int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) From 33f92a8a926761bfe23d740851d218c0c4eb6463 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 4 May 2014 09:24:39 +0800 Subject: [PATCH 147/314] chipidea: usbmisc_imx: Allow USB OTG to work on mx51 The field PLLDIVVALUE of register PHY_CTRL_1 selects the reference clock source for the PHY: 00 = sysclock uses 19.2 MHz 01 = sysclock uses 24 MHz 10 = sysclock uses 26 MHz 11 = sysclock uses 27 MHz The reset value for this field is 10 according to the reference manual, and even though this reset value works for mx53, it does not work for mx51. So instead of relying on the reset value for the PLLDIVVALUE field, explicitly set it to 01 so that a 24MHz clock can be selected for the PHY and allowing both mx51 and mx53 to have USB OTG port functional. Succesfully tested 'g_ether' on a imx51-babbage and on a imx53-qsb boards. Signed-off-by: Peter Chen Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/usbmisc_imx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index 419b8959d150..85293b8b1df9 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -46,11 +46,14 @@ #define MX27_OTG_PM_BIT BIT(24) #define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 +#define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c #define MX53_USB_UH2_CTRL_OFFSET 0x14 #define MX53_USB_UH3_CTRL_OFFSET 0x18 #define MX53_BM_OVER_CUR_DIS_H1 BIT(5) #define MX53_BM_OVER_CUR_DIS_OTG BIT(8) #define MX53_BM_OVER_CUR_DIS_UHx BIT(30) +#define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX53_USB_PLL_DIV_24_MHZ 0x01 #define MX6_BM_OVER_CUR_DIS BIT(7) @@ -164,6 +167,13 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) if (data->index > 3) return -EINVAL; + /* Select a 24 MHz reference clock for the PHY */ + reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET; + val = readl(reg); + val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK; + val |= MX53_USB_PLL_DIV_24_MHZ; + writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); + if (data->disable_oc) { spin_lock_irqsave(&usbmisc->lock, flags); switch (data->index) { From a33d8ce729f670e1618eb3faa76246b61128008e Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Sun, 4 May 2014 09:24:40 +0800 Subject: [PATCH 148/314] usb: chipidea: msm: Add device tree binding information Document device tree binding information as required by the Qualcomm USB controller. Signed-off-by: Peter Chen Signed-off-by: Ivan T. Ivanov Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt new file mode 100644 index 000000000000..f2899b550939 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt @@ -0,0 +1,17 @@ +Qualcomm CI13xxx (Chipidea) USB controllers + +Required properties: +- compatible: should contain "qcom,ci-hdrc" +- reg: offset and length of the register set in the memory map +- interrupts: interrupt-specifier for the controller interrupt. +- usb-phy: phandle for the PHY device +- dr_mode: Should be "peripheral" + +Examples: + gadget@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x400>; + dr_mode = "peripheral"; + interrupts = <0 134 0>; + usb-phy = <&usbphy0>; + }; From 2629b10167d5f641126487fef84cd036ab9cd72f Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Sun, 4 May 2014 09:24:41 +0800 Subject: [PATCH 149/314] usb: chipidea: msm: Add device tree support Allows controller to be specified via device tree. Pass PHY phandle specified in DT to core driver. Signed-off-by: Peter Chen Signed-off-by: Ivan T. Ivanov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index 2d51d852b474..736aeb2a53d6 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -57,9 +57,21 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = { static int ci_hdrc_msm_probe(struct platform_device *pdev) { struct platform_device *plat_ci; + struct usb_phy *phy; dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n"); + /* + * OTG(PHY) driver takes care of PHY initialization, clock management, + * powering up VBUS, mapping of registers address space and power + * management. + */ + phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + ci_hdrc_msm_platdata.phy = phy; + plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource, pdev->num_resources, &ci_hdrc_msm_platdata); @@ -86,10 +98,19 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id msm_ci_dt_match[] = { + { .compatible = "qcom,ci-hdrc", }, + { } +}; +MODULE_DEVICE_TABLE(of, msm_ci_dt_match); + static struct platform_driver ci_hdrc_msm_driver = { .probe = ci_hdrc_msm_probe, .remove = ci_hdrc_msm_remove, - .driver = { .name = "msm_hsusb", }, + .driver = { + .name = "msm_hsusb", + .of_match_table = msm_ci_dt_match, + }, }; module_platform_driver(ci_hdrc_msm_driver); From 3c6d98266d2028565510f0febe0592504b884f17 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Sun, 4 May 2014 09:24:42 +0800 Subject: [PATCH 150/314] usb: chipidea: msm: Initialize offset of the capability registers Since commit 62bb84e (usb: gadget: ci13xxx: convert to platform device) start address of the capability registers is not passed correctly to udc_probe(). Fix this. Signed-off-by: Peter Chen Signed-off-by: Ivan T. Ivanov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_msm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index 736aeb2a53d6..d72b9d2de2c5 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -47,6 +47,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event) static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = { .name = "ci_hdrc_msm", + .capoffset = DEF_CAPOFFSET, .flags = CI_HDRC_REGS_SHARED | CI_HDRC_REQUIRE_TRANSCEIVER | CI_HDRC_DISABLE_STREAMING, From ec447ab138e033ad96a8c6649bce51ecdcc0abe0 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Sun, 4 May 2014 09:24:43 +0800 Subject: [PATCH 151/314] Doc: usb: chipidea: need to build both kernel Image and modules When tried to enable OTG FSM, we need to rebuild both kernel Image and modules, since there are some codes at gadget modules which are controlled by related configurations. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/chipidea.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 4c0e2eaa5b29..995c8bca40e2 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -5,7 +5,7 @@ with 2 Freescale i.MX6Q sabre SD boards. 1.1 How to enable OTG FSM in menuconfig --------------------------------------- -Select CONFIG_USB_OTG_FSM. +Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. If you want to check some internal variables for otg fsm, select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which can show otg fsm variables and some controller registers value: From 10775eb17bee1ccc02ac22bb85e50699e0576a84 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Sun, 4 May 2014 09:24:44 +0800 Subject: [PATCH 152/314] usb: chipidea: udc: update gadget states according to ch9 Update device states according to ch9 in USB 2.0 specification Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index d8ab4c190aa5..69425b3cb6b7 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -709,6 +709,8 @@ __acquires(ci->lock) if (ci->status == NULL) retval = -ENOMEM; + usb_gadget_set_state(&ci->gadget, USB_STATE_DEFAULT); + done: spin_lock(&ci->lock); @@ -864,6 +866,8 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) if (ci->setaddr) { hw_usb_set_address(ci, ci->address); ci->setaddr = false; + if (ci->address) + usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS); } spin_lock_irqsave(&ci->lock, flags); @@ -1466,7 +1470,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) pm_runtime_get_sync(&_gadget->dev); hw_device_reset(ci, USBMODE_CM_DC); hw_device_state(ci, ci->ep0out->qh.dma); - dev_dbg(ci->dev, "Connected to host\n"); + usb_gadget_set_state(_gadget, USB_STATE_POWERED); } else { if (ci->driver) ci->driver->disconnect(&ci->gadget); @@ -1476,7 +1480,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) CI_HDRC_CONTROLLER_STOPPED_EVENT); _gadget_stop_activity(&ci->gadget); pm_runtime_put_sync(&_gadget->dev); - dev_dbg(ci->dev, "Disconnected from host\n"); + usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED); } } @@ -1749,6 +1753,8 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci) ci->suspended = 1; spin_unlock(&ci->lock); ci->driver->suspend(&ci->gadget); + usb_gadget_set_state(&ci->gadget, + USB_STATE_SUSPENDED); spin_lock(&ci->lock); } } From 2ea7b1487f975eb409a7a2df4081d838069cab05 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 19 May 2014 23:35:19 +0300 Subject: [PATCH 153/314] usb: phy: msm: fix bug in probe() My previous patch introduced a bug which prevented this driver from loading. devm_ioremap_resource() has a call to devm_request_mem_region() which will fail because the address space is shared between this PHY driver and CI device controller driver. Fixes: 10f0577aa5cb ('usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()') Reported-by:"Ivan T. Ivanov" Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy-msm-usb.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 4f88174aede5..ced34f39bdd4 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1586,9 +1586,11 @@ static int msm_otg_probe(struct platform_device *pdev) np ? "alt_core" : "usb_hs_core_clk"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - motg->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(motg->regs)) - return PTR_ERR(motg->regs); + if (!res) + return -EINVAL; + motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!motg->regs) + return -ENOMEM; /* * NOTE: The PHYs can be multiplexed between the chipidea controller From efccd24adae9821c908bbe2cdc7e632c91902ce3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 23 May 2014 10:36:22 +0200 Subject: [PATCH 154/314] usb: phy: add run-time dependencies to R-Car driver The Renesas R-Car USB PHY driver only supports the R8A7778 and R8A7779, it isn't useful on other systems unless build testing. Signed-off-by: Jean Delvare Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index adccdeb996d9..4c35d6176735 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -201,6 +201,7 @@ config USB_MXS_PHY config USB_RCAR_PHY tristate "Renesas R-Car USB PHY support" depends on USB || USB_GADGET + depends on ARCH_R8A7778 || ARCH_R8A7779 || COMPILE_TEST select USB_PHY help Say Y here to add support for the Renesas R-Car USB common PHY driver. From 54969ed6c4d0b9eb7fa68a909be231f383f0c406 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Mon, 5 May 2014 10:33:42 +0530 Subject: [PATCH 155/314] usb: ohci-exynos: Use struct device instead of platform_device Change to use struct device instead of struct platform_device for some static functions. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Acked-by: Jingoo Han Acked-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-exynos.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 9cf80cb7c051..05f00e3098fc 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -39,18 +39,18 @@ struct exynos_ohci_hcd { struct usb_otg *otg; }; -static void exynos_ohci_phy_enable(struct platform_device *pdev) +static void exynos_ohci_phy_enable(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); if (exynos_ohci->phy) usb_phy_init(exynos_ohci->phy); } -static void exynos_ohci_phy_disable(struct platform_device *pdev) +static void exynos_ohci_phy_disable(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); if (exynos_ohci->phy) @@ -139,7 +139,7 @@ skip_phy: platform_set_drvdata(pdev, hcd); - exynos_ohci_phy_enable(pdev); + exynos_ohci_phy_enable(&pdev->dev); err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { @@ -150,7 +150,7 @@ skip_phy: return 0; fail_add_hcd: - exynos_ohci_phy_disable(pdev); + exynos_ohci_phy_disable(&pdev->dev); fail_io: clk_disable_unprepare(exynos_ohci->clk); fail_clk: @@ -168,7 +168,7 @@ static int exynos_ohci_remove(struct platform_device *pdev) if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_disable(pdev); + exynos_ohci_phy_disable(&pdev->dev); clk_disable_unprepare(exynos_ohci->clk); @@ -190,7 +190,6 @@ static int exynos_ohci_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); - struct platform_device *pdev = to_platform_device(dev); bool do_wakeup = device_may_wakeup(dev); int rc = ohci_suspend(hcd, do_wakeup); @@ -200,7 +199,7 @@ static int exynos_ohci_suspend(struct device *dev) if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_disable(pdev); + exynos_ohci_phy_disable(dev); clk_disable_unprepare(exynos_ohci->clk); @@ -211,14 +210,13 @@ static int exynos_ohci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); - struct platform_device *pdev = to_platform_device(dev); clk_prepare_enable(exynos_ohci->clk); if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_enable(pdev); + exynos_ohci_phy_enable(dev); ohci_resume(hcd, false); From 91a9677a4ae611eb468b02c531ee3d673988d648 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Mon, 5 May 2014 10:34:25 +0530 Subject: [PATCH 156/314] usb: ehci-exynos: Use struct device instead of platform_device Change to use struct device instead of struct platform_device for some static functions. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Acked-by: Jingoo Han Acked-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-exynos.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 7f425acd9be5..4d763dc91f70 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -50,9 +50,8 @@ struct exynos_ehci_hcd { #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) -static void exynos_setup_vbus_gpio(struct platform_device *pdev) +static void exynos_setup_vbus_gpio(struct device *dev) { - struct device *dev = &pdev->dev; int err; int gpio; @@ -88,7 +87,7 @@ static int exynos_ehci_probe(struct platform_device *pdev) if (err) return err; - exynos_setup_vbus_gpio(pdev); + exynos_setup_vbus_gpio(&pdev->dev); hcd = usb_create_hcd(&exynos_ehci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); From 7d28e54b8d8dee31323433f5563534fc273bcda8 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Mon, 5 May 2014 10:32:57 +0530 Subject: [PATCH 157/314] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework Add support to consume phy provided by Generic phy framework. Keeping the support for older usb-phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ohci-exynos. Once we move to new phy in the device nodes for ohci, we can remove the support for older phys. Signed-off-by: Vivek Gautam Cc: Jingoo Han Acked-by: Alan Stern Acked-by: Kukjin Kim Reviewed-by: Tomasz Figa Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/exynos-usb.txt | 16 +++ drivers/usb/host/ohci-exynos.c | 118 +++++++++++++++--- 2 files changed, 118 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index d967ba16de60..49a9c6f2589f 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -38,6 +38,13 @@ Required properties: - interrupts: interrupt number to the cpu. - clocks: from common clock binding: handle to usb clock. - clock-names: from common clock binding: Shall be "usbhost". + - port: if in the SoC there are OHCI phys, they should be listed here. + One phy per port. Each port should have following entries: + - reg: port number on OHCI controller, e.g + On Exynos5250, port 0 is USB2.0 otg phy + port 1 is HSIC phy0 + port 2 is HSIC phy1 + - phys: from the *Generic PHY* bindings, specifying phy used by port. Example: usb@12120000 { @@ -47,6 +54,15 @@ Example: clocks = <&clock 285>; clock-names = "usbhost"; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2phy 1>; + status = "disabled"; + }; + }; DWC3 diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 05f00e3098fc..32f2ff1e93ce 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -33,28 +34,110 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver; #define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) +#define PHY_NUMBER 3 + struct exynos_ohci_hcd { struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; + struct phy *phy_g[PHY_NUMBER]; }; -static void exynos_ohci_phy_enable(struct device *dev) +static int exynos_ohci_get_phy(struct device *dev, + struct exynos_ohci_hcd *exynos_ohci) +{ + struct device_node *child; + struct phy *phy; + int phy_number; + int ret = 0; + + exynos_ohci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(exynos_ohci->phy)) { + ret = PTR_ERR(exynos_ohci->phy); + if (ret != -ENXIO && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } else { + exynos_ohci->otg = exynos_ohci->phy->otg; + } + + /* + * Getting generic phy: + * We are keeping both types of phys as a part of transiting OHCI + * to generic phy framework, so as to maintain backward compatibilty + * with old DTB. + * If there are existing devices using DTB files built from them, + * to remove the support for old bindings in this driver, + * we need to make sure that such devices have their DTBs + * updated to ones built from new DTS. + */ + for_each_available_child_of_node(dev->of_node, child) { + ret = of_property_read_u32(child, "reg", &phy_number); + if (ret) { + dev_err(dev, "Failed to parse device tree\n"); + of_node_put(child); + return ret; + } + + if (phy_number >= PHY_NUMBER) { + dev_err(dev, "Invalid number of PHYs\n"); + of_node_put(child); + return -EINVAL; + } + + phy = devm_of_phy_get(dev, child, 0); + of_node_put(child); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -ENOSYS && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } + exynos_ohci->phy_g[phy_number] = phy; + } + + return ret; +} + +static int exynos_ohci_phy_enable(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int i; + int ret = 0; - if (exynos_ohci->phy) - usb_phy_init(exynos_ohci->phy); + if (!IS_ERR(exynos_ohci->phy)) + return usb_phy_init(exynos_ohci->phy); + + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ohci->phy_g[i])) + ret = phy_power_on(exynos_ohci->phy_g[i]); + if (ret) + for (i--; i >= 0; i--) + if (!IS_ERR(exynos_ohci->phy_g[i])) + phy_power_off(exynos_ohci->phy_g[i]); + + return ret; } static void exynos_ohci_phy_disable(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int i; - if (exynos_ohci->phy) + if (!IS_ERR(exynos_ohci->phy)) { usb_phy_shutdown(exynos_ohci->phy); + return; + } + + for (i = 0; i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ohci->phy_g[i])) + phy_power_off(exynos_ohci->phy_g[i]); } static int exynos_ohci_probe(struct platform_device *pdev) @@ -62,7 +145,6 @@ static int exynos_ohci_probe(struct platform_device *pdev) struct exynos_ohci_hcd *exynos_ohci; struct usb_hcd *hcd; struct resource *res; - struct usb_phy *phy; int irq; int err; @@ -88,15 +170,9 @@ static int exynos_ohci_probe(struct platform_device *pdev) "samsung,exynos5440-ohci")) goto skip_phy; - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR(phy)) { - usb_put_hcd(hcd); - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - exynos_ohci->phy = phy; - exynos_ohci->otg = phy->otg; - } + err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci); + if (err) + goto fail_clk; skip_phy: exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); @@ -139,7 +215,11 @@ skip_phy: platform_set_drvdata(pdev, hcd); - exynos_ohci_phy_enable(&pdev->dev); + err = exynos_ohci_phy_enable(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "Failed to enable USB phy\n"); + goto fail_io; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { @@ -210,13 +290,19 @@ static int exynos_ohci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int ret; clk_prepare_enable(exynos_ohci->clk); if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_enable(dev); + ret = exynos_ohci_phy_enable(dev); + if (ret) { + dev_err(dev, "Failed to enable USB phy\n"); + clk_disable_unprepare(exynos_ohci->clk); + return ret; + } ohci_resume(hcd, false); From 1c17675d6c733232f10afceec0bcd016ad3849f0 Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Mon, 5 May 2014 10:32:28 +0530 Subject: [PATCH 158/314] usb: ehci-exynos: Change to use phy provided by the generic phy framework Add the phy provider, supplied by new Exynos-usb2phy using Generic phy framework. Keeping the support for older USB phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ehci-exynos. Once we move to new phy in the device nodes for ehci, we can remove the support for older phys. Signed-off-by: Kamil Debski [gautam.vivek@samsung.com: Addressed review comments from mailing list] [gautam.vivek@samsung.com: Kept the code for old usb-phy, and just added support for new exynos5-usb2phy in generic phy framework] [gautam.vivek@samsung.com: Edited the commit message] Signed-off-by: Vivek Gautam Cc: Jingoo Han Acked-by: Alan Stern Acked-by: Kukjin Kim Reviewed-by: Tomasz Figa Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/exynos-usb.txt | 15 ++ drivers/usb/host/ehci-exynos.c | 129 +++++++++++++++--- 2 files changed, 124 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 49a9c6f2589f..a3b5990d0f2c 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -12,6 +12,13 @@ Required properties: - interrupts: interrupt number to the cpu. - clocks: from common clock binding: handle to usb clock. - clock-names: from common clock binding: Shall be "usbhost". + - port: if in the SoC there are EHCI phys, they should be listed here. + One phy per port. Each port should have following entries: + - reg: port number on EHCI controller, e.g + On Exynos5250, port 0 is USB2.0 otg phy + port 1 is HSIC phy0 + port 2 is HSIC phy1 + - phys: from the *Generic PHY* bindings; specifying phy used by port. Optional properties: - samsung,vbus-gpio: if present, specifies the GPIO that @@ -27,6 +34,14 @@ Example: clocks = <&clock 285>; clock-names = "usbhost"; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2phy 1>; + status = "disabled"; + }; }; OHCI diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 4d763dc91f70..c7081c75de8a 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -42,14 +43,104 @@ static const char hcd_name[] = "ehci-exynos"; static struct hc_driver __read_mostly exynos_ehci_hc_driver; +#define PHY_NUMBER 3 + struct exynos_ehci_hcd { struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; + struct phy *phy_g[PHY_NUMBER]; }; #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) +static int exynos_ehci_get_phy(struct device *dev, + struct exynos_ehci_hcd *exynos_ehci) +{ + struct device_node *child; + struct phy *phy; + int phy_number; + int ret = 0; + + exynos_ehci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(exynos_ehci->phy)) { + ret = PTR_ERR(exynos_ehci->phy); + if (ret != -ENXIO && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } else { + exynos_ehci->otg = exynos_ehci->phy->otg; + } + + for_each_available_child_of_node(dev->of_node, child) { + ret = of_property_read_u32(child, "reg", &phy_number); + if (ret) { + dev_err(dev, "Failed to parse device tree\n"); + of_node_put(child); + return ret; + } + + if (phy_number >= PHY_NUMBER) { + dev_err(dev, "Invalid number of PHYs\n"); + of_node_put(child); + return -EINVAL; + } + + phy = devm_of_phy_get(dev, child, 0); + of_node_put(child); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -ENOSYS && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } + exynos_ehci->phy_g[phy_number] = phy; + } + + return ret; +} + +static int exynos_ehci_phy_enable(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + int i; + int ret = 0; + + if (!IS_ERR(exynos_ehci->phy)) + return usb_phy_init(exynos_ehci->phy); + + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ehci->phy_g[i])) + ret = phy_power_on(exynos_ehci->phy_g[i]); + if (ret) + for (i--; i >= 0; i--) + if (!IS_ERR(exynos_ehci->phy_g[i])) + phy_power_off(exynos_ehci->phy_g[i]); + + return ret; +} + +static void exynos_ehci_phy_disable(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + int i; + + if (!IS_ERR(exynos_ehci->phy)) { + usb_phy_shutdown(exynos_ehci->phy); + return; + } + + for (i = 0; i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ehci->phy_g[i])) + phy_power_off(exynos_ehci->phy_g[i]); +} + static void exynos_setup_vbus_gpio(struct device *dev) { int err; @@ -74,7 +165,6 @@ static int exynos_ehci_probe(struct platform_device *pdev) struct usb_hcd *hcd; struct ehci_hcd *ehci; struct resource *res; - struct usb_phy *phy; int irq; int err; @@ -101,15 +191,9 @@ static int exynos_ehci_probe(struct platform_device *pdev) "samsung,exynos5440-ehci")) goto skip_phy; - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR(phy)) { - usb_put_hcd(hcd); - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - exynos_ehci->phy = phy; - exynos_ehci->otg = phy->otg; - } + err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci); + if (err) + goto fail_clk; skip_phy: @@ -151,8 +235,11 @@ skip_phy: if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_init(exynos_ehci->phy); + err = exynos_ehci_phy_enable(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "Failed to enable USB phy\n"); + goto fail_io; + } ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -172,8 +259,7 @@ skip_phy: return 0; fail_add_hcd: - if (exynos_ehci->phy) - usb_phy_shutdown(exynos_ehci->phy); + exynos_ehci_phy_disable(&pdev->dev); fail_io: clk_disable_unprepare(exynos_ehci->clk); fail_clk: @@ -191,8 +277,7 @@ static int exynos_ehci_remove(struct platform_device *pdev) if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_shutdown(exynos_ehci->phy); + exynos_ehci_phy_disable(&pdev->dev); clk_disable_unprepare(exynos_ehci->clk); @@ -217,8 +302,7 @@ static int exynos_ehci_suspend(struct device *dev) if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_shutdown(exynos_ehci->phy); + exynos_ehci_phy_disable(dev); clk_disable_unprepare(exynos_ehci->clk); @@ -229,14 +313,19 @@ static int exynos_ehci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + int ret; clk_prepare_enable(exynos_ehci->clk); if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_init(exynos_ehci->phy); + ret = exynos_ehci_phy_enable(dev); + if (ret) { + dev_err(dev, "Failed to enable USB phy\n"); + clk_disable_unprepare(exynos_ehci->clk); + return ret; + } /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); From 4e24bde33fd26af51b2f0c69ec5a5d847f6f26a5 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 10 May 2014 17:30:05 +0530 Subject: [PATCH 159/314] usb: host: ehci-exynos: Use devm_ioremap_resource instead of devm_ioremap Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-exynos.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index c7081c75de8a..d1c76216350f 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -218,10 +218,9 @@ skip_phy: hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to remap I/O memory\n"); - err = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto fail_io; } From 70843f623b58f9ab630e97400cb7d4f610b11c9b Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 10 May 2014 17:30:06 +0530 Subject: [PATCH 160/314] usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-msm.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index f341651d6f6c..982c09bebe0f 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -96,10 +96,9 @@ static int ehci_msm_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto put_hcd; } From 40a5ec988c3403106f5fb68ca3a328beff3c11bf Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 10 May 2014 17:30:07 +0530 Subject: [PATCH 161/314] usb: host: ehci-mv: Use devm_ioremap_resource instead of devm_ioremap Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mv.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index bd61612a7251..08147c35f836 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -176,11 +176,9 @@ static int mv_ehci_probe(struct platform_device *pdev) goto err_put_hcd; } - ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start, - resource_size(r)); - if (!ehci_mv->phy_regs) { - dev_err(&pdev->dev, "failed to map phy I/O memory\n"); - retval = -EFAULT; + ehci_mv->phy_regs = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(ehci_mv->phy_regs)) { + retval = PTR_ERR(ehci_mv->phy_regs); goto err_put_hcd; } @@ -191,11 +189,9 @@ static int mv_ehci_probe(struct platform_device *pdev) goto err_put_hcd; } - ehci_mv->cap_regs = devm_ioremap(&pdev->dev, r->start, - resource_size(r)); - if (ehci_mv->cap_regs == NULL) { - dev_err(&pdev->dev, "failed to map I/O memory\n"); - retval = -EFAULT; + ehci_mv->cap_regs = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(ehci_mv->cap_regs)) { + retval = PTR_ERR(ehci_mv->cap_regs); goto err_put_hcd; } From e0f77a91ee30ed785c107ed48fb2171d063df42b Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 10 May 2014 17:30:08 +0530 Subject: [PATCH 162/314] usb: host: ehci-spear: Use devm_ioremap_resource instead of devm_ioremap Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-spear.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 8bd915b2ae8c..1d59958ad0ce 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -106,16 +106,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - retval = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - retval = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); goto err_put_hcd; } From 6ba96dcebf3b4c4a8befaa37dca0c590b0deceac Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 10 May 2014 17:30:09 +0530 Subject: [PATCH 163/314] usb: host: ehci-tegra: Use devm_ioremap_resource instead of devm_ioremap Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 572634cd95d6..6fdcb8ad2296 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -411,10 +411,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to remap I/O memory\n"); - err = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto cleanup_clk_en; } ehci->caps = hcd->regs + 0x100; From bae00c1ac3b3f32a0f7f1964054f6c3f33559607 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 10 May 2014 17:30:10 +0530 Subject: [PATCH 164/314] usb: host: ohci-exynos: Use devm_ioremap_resource instead of devm_ioremap Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-exynos.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 32f2ff1e93ce..060a6a414750 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -196,10 +196,9 @@ skip_phy: hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to remap I/O memory\n"); - err = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto fail_io; } From 90ec00d54e28f4b038e66905ea5b9478bcdc3f37 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Fri, 25 Apr 2014 10:30:32 -0500 Subject: [PATCH 165/314] uwb: fix channel change failure Make the transition to the UWB_RSV_STATE_NONE state synchronous so that there is not a race between uwb_rsv_terminate and uwb_rsv_establish. uwb_rsv_terminate would set the rsv->state to UWB_RSV_STATE_NONE but did not release the stream resource until a 320ms timeout had expired. If a user called uwb_rsv_establish during that time, it could fail to establish the reservation because no stream resources were available. This patch removes the timer from the uwb_rsv_terminate process since it is not needed when transitioning to UWB_RSV_STATE_NONE. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/rsv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index 3fe611941046..4026f1adff01 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -249,7 +249,9 @@ static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv) * super frame and should not be terminated if no response is * received. */ - if (rsv->is_multicast) { + if (rsv->state == UWB_RSV_STATE_NONE) { + sframes = 0; + } else if (rsv->is_multicast) { if (rsv->state == UWB_RSV_STATE_O_INITIATED || rsv->state == UWB_RSV_STATE_O_MOVE_EXPANDING || rsv->state == UWB_RSV_STATE_O_MOVE_COMBINING @@ -322,6 +324,7 @@ void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state) switch (new_state) { case UWB_RSV_STATE_NONE: uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE); + uwb_rsv_remove(rsv); uwb_rsv_callback(rsv); break; case UWB_RSV_STATE_O_INITIATED: @@ -442,6 +445,8 @@ static void uwb_rsv_handle_timeout_work(struct work_struct *work) uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED); uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas); goto unlock; + case UWB_RSV_STATE_NONE: + goto unlock; default: break; } From 7b360ee09a8bec5783cbecdcb17cd8d70edadf56 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Fri, 25 Apr 2014 10:30:33 -0500 Subject: [PATCH 166/314] uwb: add error messages when reservation establish fails Add better error messages during the channel change/reservation establish process. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/beacon.c | 4 +++- drivers/uwb/rsv.c | 14 ++++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c index 57b5ff61020c..b476187adf55 100644 --- a/drivers/uwb/beacon.c +++ b/drivers/uwb/beacon.c @@ -125,8 +125,10 @@ int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset) else { /* channel >= 0...dah */ result = uwb_rc_start_beacon(rc, bpst_offset, channel); - if (result < 0) + if (result < 0) { + dev_err(dev, "Cannot start beaconing: %d\n", result); return result; + } if (le16_to_cpu(rc->ies->wIELength) > 0) { result = uwb_rc_set_ie(rc, rc->ies); if (result < 0) { diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index 4026f1adff01..0887ae982783 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -163,8 +163,10 @@ static int uwb_rsv_get_stream(struct uwb_rsv *rsv) } stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS); - if (stream >= UWB_NUM_STREAMS) + if (stream >= UWB_NUM_STREAMS) { + dev_err(dev, "%s: no available stream found\n", __func__); return -EBUSY; + } rsv->stream = stream; set_bit(stream, streams_bm); @@ -555,12 +557,16 @@ int uwb_rsv_establish(struct uwb_rsv *rsv) { struct uwb_rc *rc = rsv->rc; struct uwb_mas_bm available; + struct device *dev = &rc->uwb_dev.dev; int ret; mutex_lock(&rc->rsvs_mutex); ret = uwb_rsv_get_stream(rsv); - if (ret) + if (ret) { + dev_err(dev, "%s: uwb_rsv_get_stream failed: %d\n", + __func__, ret); goto out; + } rsv->tiebreaker = prandom_u32() & 1; /* get available mas bitmap */ @@ -570,12 +576,16 @@ int uwb_rsv_establish(struct uwb_rsv *rsv) if (ret == UWB_RSV_ALLOC_NOT_FOUND) { ret = -EBUSY; uwb_rsv_put_stream(rsv); + dev_err(dev, "%s: uwb_rsv_find_best_allocation failed: %d\n", + __func__, ret); goto out; } ret = uwb_drp_avail_reserve_pending(rc, &rsv->mas); if (ret != 0) { uwb_rsv_put_stream(rsv); + dev_err(dev, "%s: uwb_drp_avail_reserve_pending failed: %d\n", + __func__, ret); goto out; } From ce1b066136a30079c4e6e81e015ad9bc2180d46f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 27 Apr 2014 16:47:43 +0200 Subject: [PATCH 167/314] usb: qcserial: fix multiline comment coding style MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use a consistent style for all multiline comments. Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 6c0a542e8ec1..e282155dd4a1 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -225,12 +225,14 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) /* default to enabling interface */ altsetting = 0; - /* Composite mode; don't bind to the QMI/net interface as that + /* + * Composite mode; don't bind to the QMI/net interface as that * gets handled by other drivers. */ if (is_gobi1k) { - /* Gobi 1K USB layout: + /* + * Gobi 1K USB layout: * 0: DM/DIAG (use libqcdm from ModemManager for communication) * 1: serial port (doesn't respond) * 2: AT-capable modem port @@ -244,7 +246,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) else altsetting = -1; } else { - /* Gobi 2K+ USB layout: + /* + * Gobi 2K+ USB layout: * 0: QMI/net * 1: DM/DIAG (use libqcdm from ModemManager for communication) * 2: AT-capable modem port From d712ca91db6d5463ca5a9b06eb6ba937c59a15fa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 27 Apr 2014 16:47:44 +0200 Subject: [PATCH 168/314] usb: qcserial: refactor device layout selection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e282155dd4a1..217e29ccde52 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,8 +22,14 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" +/* standard device layouts supported by this driver */ +enum qcserial_layouts { + QCSERIAL_G2K = 0, /* Gobi 2000 */ + QCSERIAL_G1K = 1, /* Gobi 1000 */ +}; + #define DEVICE_G1K(v, p) \ - USB_DEVICE(v, p), .driver_info = 1 + USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K static const struct usb_device_id id_table[] = { /* Gobi 1000 devices */ @@ -178,11 +184,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) int retval = -ENODEV; __u8 nintf; __u8 ifnum; - bool is_gobi1k = id->driver_info ? true : false; int altsetting = -1; - dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k); - nintf = serial->dev->actconfig->desc.bNumInterfaces; dev_dbg(dev, "Num Interfaces = %d\n", nintf); ifnum = intf->desc.bInterfaceNumber; @@ -230,7 +233,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) * gets handled by other drivers. */ - if (is_gobi1k) { + switch (id->driver_info) { + case QCSERIAL_G1K: /* * Gobi 1K USB layout: * 0: DM/DIAG (use libqcdm from ModemManager for communication) @@ -245,7 +249,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) dev_dbg(dev, "Modem port found\n"); else altsetting = -1; - } else { + break; + case QCSERIAL_G2K: /* * Gobi 2K+ USB layout: * 0: QMI/net @@ -273,6 +278,11 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); break; } + break; + default: + dev_err(dev, "unsupported device layout type: %lu\n", + id->driver_info); + break; } done: From 8bc7a069402e1a443ded8088a8be0dc8aa1c2c9b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 27 Apr 2014 16:47:45 +0200 Subject: [PATCH 169/314] usb: qcserial: define and use Sierra Wireless layout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 98 +++++++++++++++++++---------------- 1 file changed, 53 insertions(+), 45 deletions(-) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 217e29ccde52..91e7bb515398 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -26,10 +26,13 @@ enum qcserial_layouts { QCSERIAL_G2K = 0, /* Gobi 2000 */ QCSERIAL_G1K = 1, /* Gobi 1000 */ + QCSERIAL_SWI = 2, /* Sierra Wireless */ }; #define DEVICE_G1K(v, p) \ USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K +#define DEVICE_SWI(v, p) \ + USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI static const struct usb_device_id id_table[] = { /* Gobi 1000 devices */ @@ -132,46 +135,20 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ - /* non Gobi Qualcomm serial devices */ - {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 2)}, /* Sierra Wireless MC7700 NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 3)}, /* Sierra Wireless MC7700 Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 0)}, /* Sierra Wireless MC7750 Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 2)}, /* Sierra Wireless MC7750 NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x114f, 0x68a2, 3)}, /* Sierra Wireless MC7750 Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)}, /* Sierra Wireless MC7710 Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)}, /* Sierra Wireless MC7710 NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)}, /* Sierra Wireless MC7710 Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 0)}, /* Sierra Wireless MC73xx Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 2)}, /* Sierra Wireless MC73xx NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 3)}, /* Sierra Wireless MC73xx Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)}, /* Sierra Wireless EM7355 Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)}, /* Sierra Wireless EM7355 NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)}, /* Sierra Wireless EM7355 Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 0)}, /* Sierra Wireless MC7305/MC7355 Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 2)}, /* Sierra Wireless MC7305/MC7355 NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 3)}, /* Sierra Wireless MC7305/MC7355 Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 0)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a2, 3)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 0)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 2)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a3, 3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 0)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 2)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a4, 3)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 0)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 2)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a8, 3)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card Modem */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 0)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card Device Management */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 2)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card NMEA */ - {USB_DEVICE_INTERFACE_NUMBER(0x413c, 0x81a9, 3)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card Modem */ + /* non-Gobi Sierra Wireless devices */ + {DEVICE_SWI(0x0f3d, 0x68a2)}, /* Sierra Wireless MC7700 */ + {DEVICE_SWI(0x114f, 0x68a2)}, /* Sierra Wireless MC7750 */ + {DEVICE_SWI(0x1199, 0x68a2)}, /* Sierra Wireless MC7710 */ + {DEVICE_SWI(0x1199, 0x68c0)}, /* Sierra Wireless MC73xx */ + {DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */ + {DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */ + {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */ + {DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */ + {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ { } /* Terminating entry */ }; @@ -220,11 +197,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) goto done; } - if (nintf < 3 || nintf > 4) { - dev_err(dev, "unknown number of interfaces: %d\n", nintf); - goto done; - } - /* default to enabling interface */ altsetting = 0; @@ -242,6 +214,12 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) * 2: AT-capable modem port * 3: QMI/net */ + if (nintf < 3 || nintf > 4) { + dev_err(dev, "unknown number of interfaces: %d\n", nintf); + altsetting = -1; + goto done; + } + if (ifnum == 0) { dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n"); altsetting = 1; @@ -258,6 +236,12 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) * 2: AT-capable modem port * 3: NMEA */ + if (nintf < 3 || nintf > 4) { + dev_err(dev, "unknown number of interfaces: %d\n", nintf); + altsetting = -1; + goto done; + } + switch (ifnum) { case 0: /* Don't claim the QMI/net interface */ @@ -279,6 +263,30 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) break; } break; + case QCSERIAL_SWI: + /* + * Sierra Wireless layout: + * 0: DM/DIAG (use libqcdm from ModemManager for communication) + * 2: NMEA + * 3: AT-capable modem port + * 8: QMI/net + */ + switch (ifnum) { + case 0: + dev_dbg(dev, "DM/DIAG interface found\n"); + break; + case 2: + dev_dbg(dev, "NMEA GPS interface found\n"); + break; + case 3: + dev_dbg(dev, "Modem port found\n"); + break; + default: + /* don't claim any unsupported interface */ + altsetting = -1; + break; + } + break; default: dev_err(dev, "unsupported device layout type: %lu\n", id->driver_info); From 48292d8b0726412646086821656193dbc289ce4c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 27 Apr 2014 16:47:46 +0200 Subject: [PATCH 170/314] usb: qcserial: remove interface number matching MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Matching on interface numbers was not such a good idea for multi-function serial devices after all. It is much better do create well defined device layouts, allowing a single match entry per device. Remove this now unused code. Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 91e7bb515398..ca7b43092439 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -190,13 +190,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) } - /* allow any number of interfaces when doing direct interface match */ - if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER) { - dev_dbg(dev, "Generic Qualcomm serial interface found\n"); - altsetting = 0; - goto done; - } - /* default to enabling interface */ altsetting = 0; From e2b86c1d39d03f566514160d2e8b63e4645095d0 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 24 Apr 2014 18:51:02 -0700 Subject: [PATCH 171/314] USB: appledisplay: Convert /n to \n Use a newline character appropriately. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index ba6a5d6e618e..f37c78d1bdf4 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -110,7 +110,7 @@ static void appledisplay_complete(struct urb *urb) __func__, status); return; default: - dev_dbg(dev, "%s - nonzero urb status received: %d/n", + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } From 549e83500b801dbd274bceec04afe02a0e989fe2 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 20 May 2014 13:09:33 -0700 Subject: [PATCH 172/314] USB: iowarrior: Convert local dbg macro to dev_dbg Use a more standard logging style. Add terminating newlines to formats. Remove __func__ as that can be added via dynamic debug. Remove now unnecessary debug module parameter. Remove the dbg macro too. Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/iowarrior.c | 38 ++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 20bcfdd7eace..c6bfd13f6c92 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -51,19 +51,12 @@ */ #define MAX_WRITES_IN_FLIGHT 4 -/* Use our own dbg macro */ -#undef dbg -#define dbg( format, arg... ) do { if( debug ) printk( KERN_DEBUG __FILE__ ": " format "\n" , ## arg ); } while ( 0 ) - MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* Module parameters */ static DEFINE_MUTEX(iowarrior_mutex); -static bool debug = 0; -module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); static struct usb_driver iowarrior_driver; static DEFINE_MUTEX(iowarrior_open_disc_lock); @@ -235,8 +228,8 @@ static void iowarrior_write_callback(struct urb *urb) if (status && !(status == -ENOENT || status == -ECONNRESET || status == -ESHUTDOWN)) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); + dev_dbg(&dev->interface->dev, + "nonzero write bulk status received: %d\n", status); } /* free up our allocated buffer */ usb_free_coherent(urb->dev, urb->transfer_buffer_length, @@ -251,7 +244,7 @@ static void iowarrior_write_callback(struct urb *urb) */ static inline void iowarrior_delete(struct iowarrior *dev) { - dbg("%s - minor %d", __func__, dev->minor); + dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor); kfree(dev->int_in_buffer); usb_free_urb(dev->int_in_urb); kfree(dev->read_queue); @@ -288,7 +281,8 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer, if (dev == NULL || !dev->present) return -ENODEV; - dbg("%s - minor %d, count = %zd", __func__, dev->minor, count); + dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n", + dev->minor, count); /* read count must be packet size (+ time stamp) */ if ((count != dev->report_size) @@ -356,7 +350,8 @@ static ssize_t iowarrior_write(struct file *file, retval = -ENODEV; goto exit; } - dbg("%s - minor %d, count = %zd", __func__, dev->minor, count); + dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n", + dev->minor, count); /* if count is 0 we're already done */ if (count == 0) { retval = 0; @@ -418,14 +413,16 @@ static ssize_t iowarrior_write(struct file *file, int_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!int_out_urb) { retval = -ENOMEM; - dbg("%s Unable to allocate urb ", __func__); + dev_dbg(&dev->interface->dev, + "Unable to allocate urb\n"); goto error_no_urb; } buf = usb_alloc_coherent(dev->udev, dev->report_size, GFP_KERNEL, &int_out_urb->transfer_dma); if (!buf) { retval = -ENOMEM; - dbg("%s Unable to allocate buffer ", __func__); + dev_dbg(&dev->interface->dev, + "Unable to allocate buffer\n"); goto error_no_buffer; } usb_fill_int_urb(int_out_urb, dev->udev, @@ -441,8 +438,9 @@ static ssize_t iowarrior_write(struct file *file, } retval = usb_submit_urb(int_out_urb, GFP_KERNEL); if (retval) { - dbg("%s submit error %d for urb nr.%d", __func__, - retval, atomic_read(&dev->write_busy)); + dev_dbg(&dev->interface->dev, + "submit error %d for urb nr.%d\n", + retval, atomic_read(&dev->write_busy)); goto error; } /* submit was ok */ @@ -502,8 +500,8 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, goto error_out; } - dbg("%s - minor %d, cmd 0x%.4x, arg %ld", __func__, dev->minor, cmd, - arg); + dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n", + dev->minor, cmd, arg); retval = 0; io_res = 0; @@ -601,8 +599,6 @@ static int iowarrior_open(struct inode *inode, struct file *file) int subminor; int retval = 0; - dbg("%s", __func__); - mutex_lock(&iowarrior_mutex); subminor = iminor(inode); @@ -662,7 +658,7 @@ static int iowarrior_release(struct inode *inode, struct file *file) return -ENODEV; } - dbg("%s - minor %d", __func__, dev->minor); + dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor); /* lock our device */ mutex_lock(&dev->mutex); From 353fe198602e8b4d1c7bdcceb8e60955087201b1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:50 +0200 Subject: [PATCH 173/314] USB: sierra: fix AA deadlock in open error path Fix AA deadlock in open error path that would call close() and try to grab the already held disc_mutex. Fixes: b9a44bc19f48 ("sierra: driver urb handling improvements") Cc: # v2.6.31 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 6b192e602ce0..07cbd985ed65 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -816,14 +816,9 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); err = sierra_submit_rx_urbs(port, GFP_KERNEL); - if (err) { - /* get rid of everything as in close */ - sierra_close(port); - /* restore balance for autopm */ - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - return err; - } + if (err) + goto err_submit; + sierra_send_setup(port); serial->interface->needs_remote_wakeup = 1; @@ -833,6 +828,16 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) usb_autopm_put_interface(serial->interface); return 0; + +err_submit: + sierra_stop_rx_urbs(port); + + for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } + + return err; } From 8452727de70f6ad850cd6d0aaa18b5d9050aa63b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:51 +0200 Subject: [PATCH 174/314] USB: sierra: fix use after free at suspend/resume Fix use after free or NULL-pointer dereference during suspend and resume. The port data may never have been allocated (port probe failed) or may already have been released by port_remove (e.g. driver is unloaded) when suspend and resume are called. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 07cbd985ed65..2c5c5a9330e2 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -933,6 +933,7 @@ static int sierra_port_remove(struct usb_serial_port *port) struct sierra_port_private *portdata; portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); kfree(portdata); return 0; @@ -949,6 +950,8 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; sierra_stop_rx_urbs(port); usb_kill_anchored_urbs(&portdata->active); } @@ -991,6 +994,9 @@ static int sierra_resume(struct usb_serial *serial) port = serial->port[i]; portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { usb_anchor_urb(urb, &portdata->active); intfdata->in_flight++; From 7fdd26a01eb7b6cb6855ff8f69ef4a720720dfcb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:52 +0200 Subject: [PATCH 175/314] USB: sierra: fix urb and memory leak in resume error path Neither the transfer buffer or the urb itself were released in the resume error path for delayed writes. Also on errors, the remainder of the queue was not even processed, which leads to further urb and buffer leaks. The same error path also failed to balance the outstanding-urb counter, something which results in degraded throughput or completely blocked writes. Fix this by releasing urb and buffer and balancing counters on errors, and by always processing the whole queue even when submission of one urb fails. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 2c5c5a9330e2..dd9820d3fa03 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1004,8 +1004,12 @@ static int sierra_resume(struct usb_serial *serial) if (err < 0) { intfdata->in_flight--; usb_unanchor_urb(urb); - usb_scuttle_anchored_urbs(&portdata->delayed); - break; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + spin_lock(&portdata->lock); + portdata->outstanding_urbs--; + spin_unlock(&portdata->lock); + continue; } } From 014333f77c0b71123d6ef7d31a9724e0699c9548 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:53 +0200 Subject: [PATCH 176/314] USB: sierra: fix urb and memory leak on disconnect The delayed-write queue was never emptied on disconnect, something which would lead to leaked urbs and transfer buffers if the device is disconnected before being runtime resumed due to a write. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index dd9820d3fa03..1a42649253a5 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -759,6 +759,7 @@ static void sierra_close(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; struct sierra_intf_private *intfdata = port->serial->private; + struct urb *urb; portdata = usb_get_serial_port_data(port); @@ -780,6 +781,18 @@ static void sierra_close(struct usb_serial_port *port) portdata->opened = 0; spin_unlock_irq(&intfdata->susp_lock); + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + usb_autopm_put_interface_async(serial->interface); + spin_lock(&portdata->lock); + portdata->outstanding_urbs--; + spin_unlock(&portdata->lock); + } + sierra_stop_rx_urbs(port); for (i = 0; i < portdata->num_in_urbs; i++) { sierra_release_urb(portdata->in_urbs[i]); From 80cc0fcbdaeaf10d04ba27779a2d7ceb73d2717a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:54 +0200 Subject: [PATCH 177/314] USB: sierra: fix remote wakeup Make sure that needs_remote_wake up is always set when there are open ports. Currently close() would unconditionally set needs_remote_wakeup to 0 even though there might still be open ports. This could lead to blocked input and possibly dropped data on devices that do not support remote wakeup (and which must therefore not be runtime suspended while open). Add an open_ports counter (protected by the susp_lock) and only clear needs_remote_wakeup when the last port is closed. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 1a42649253a5..37480348e39b 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -58,6 +58,7 @@ struct sierra_intf_private { spinlock_t susp_lock; unsigned int suspended:1; int in_flight; + unsigned int open_ports; }; static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) @@ -768,7 +769,6 @@ static void sierra_close(struct usb_serial_port *port) mutex_lock(&serial->disc_mutex); if (!serial->disconnected) { - serial->interface->needs_remote_wakeup = 0; /* odd error handling due to pm counters */ if (!usb_autopm_get_interface(serial->interface)) sierra_send_setup(port); @@ -779,6 +779,8 @@ static void sierra_close(struct usb_serial_port *port) mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; + if (--intfdata->open_ports == 0) + serial->interface->needs_remote_wakeup = 0; spin_unlock_irq(&intfdata->susp_lock); for (;;) { @@ -834,9 +836,10 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) sierra_send_setup(port); - serial->interface->needs_remote_wakeup = 1; spin_lock_irq(&intfdata->susp_lock); portdata->opened = 1; + if (++intfdata->open_ports == 1) + serial->interface->needs_remote_wakeup = 1; spin_unlock_irq(&intfdata->susp_lock); usb_autopm_put_interface(serial->interface); From 93670599fc52217dcf8a69832faf66171cdb9581 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:55 +0200 Subject: [PATCH 178/314] USB: sierra: fix characters being dropped at close Fix characters potentially being dropped at close due to missing chars_in_buffer implementation. Note that currently the write urbs are not even killed at close (will be fixed separately), but this could still lead to dropped data since we have lowered DTR/RTS. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 37480348e39b..ed43b18ace78 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -675,6 +675,23 @@ static int sierra_write_room(struct tty_struct *tty) return 2048; } +static int sierra_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + unsigned long flags; + int chars; + + /* NOTE: This overcounts somewhat. */ + spin_lock_irqsave(&portdata->lock, flags); + chars = portdata->outstanding_urbs * MAX_TRANSFER; + spin_unlock_irqrestore(&portdata->lock, flags); + + dev_dbg(&port->dev, "%s - %d\n", __func__, chars); + + return chars; +} + static void sierra_stop_rx_urbs(struct usb_serial_port *port) { int i; @@ -1060,6 +1077,7 @@ static struct usb_serial_driver sierra_device = { .dtr_rts = sierra_dtr_rts, .write = sierra_write, .write_room = sierra_write_room, + .chars_in_buffer = sierra_chars_in_buffer, .set_termios = sierra_set_termios, .tiocmget = sierra_tiocmget, .tiocmset = sierra_tiocmset, From c9d838a898fe232dd51eb924a17cee346bcb697c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:56 +0200 Subject: [PATCH 179/314] USB: sierra: fix urbs not being killed on shutdown Make sure to stop all I/O, including any active write urbs, at shutdown. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ed43b18ace78..96ad379a0681 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -813,6 +813,8 @@ static void sierra_close(struct usb_serial_port *port) } sierra_stop_rx_urbs(port); + usb_kill_anchored_urbs(&portdata->active); + for (i = 0; i < portdata->num_in_urbs; i++) { sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; From f4a2d499e7f0ea9089c8e537ddad12260f7aab69 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:57 +0200 Subject: [PATCH 180/314] USB: sierra: fix resume error reporting Add error message to resume error path and make sure to also return an error when failing to submit a cached write. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 96ad379a0681..0254f6d6bc5d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1037,6 +1037,10 @@ static int sierra_resume(struct usb_serial *serial) intfdata->in_flight++; err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { + dev_err(&port->dev, + "%s - submit urb failed: %d", + __func__, err); + ec++; intfdata->in_flight--; usb_unanchor_urb(urb); kfree(urb->transfer_buffer); From d304889888af2ef65c94dfb52441cfecb05853e8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:58 +0200 Subject: [PATCH 181/314] USB: sierra: fix line-control pipe direction The sierra line-control request has been using the wrong pipe direction, while relying on USB core to fix it up. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 0254f6d6bc5d..4cb11b710b48 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -365,7 +365,7 @@ static int sierra_send_setup(struct usb_serial_port *port) if (retval < 0) return retval; - retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); usb_autopm_put_interface(serial->interface); From 21aa1c41dbe820ec7d2271f3e675eb1be2320245 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:22:59 +0200 Subject: [PATCH 182/314] USB: sierra: remove bogus endpoint test Remove bogus endpoint-address test which is never true. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 4cb11b710b48..169899f5f2e6 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -747,9 +747,6 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, struct urb *urb; u8 *buf; - if (endpoint == -1) - return NULL; - urb = usb_alloc_urb(0, mem_flags); if (!urb) return NULL; From bc03cfe84d833a49a0a0a6d5e45fc84169f48e30 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:00 +0200 Subject: [PATCH 183/314] USB: sierra: remove unused variable Remove unused variable from sierra_release_urb. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 169899f5f2e6..fa0b78ad42d7 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -419,9 +419,7 @@ static int sierra_tiocmset(struct tty_struct *tty, static void sierra_release_urb(struct urb *urb) { - struct usb_serial_port *port; if (urb) { - port = urb->context; kfree(urb->transfer_buffer); usb_free_urb(urb); } From e825aaa0624ef5cc0aa06e3102ddfc9ed95c2e2c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:01 +0200 Subject: [PATCH 184/314] USB: sierra: remove unimplemented set_termios The driver does not implement set_termios so the operation can be left unset (tty will do the tty_termios_copy_hw for us). Note that the send_setup call is bogus as it really only sets DTR/RTS to their current values. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index fa0b78ad42d7..854ac61581ba 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -372,13 +372,6 @@ static int sierra_send_setup(struct usb_serial_port *port) return retval; } -static void sierra_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) -{ - tty_termios_copy_hw(&tty->termios, old_termios); - sierra_send_setup(port); -} - static int sierra_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -1079,7 +1072,6 @@ static struct usb_serial_driver sierra_device = { .write = sierra_write, .write_room = sierra_write_room, .chars_in_buffer = sierra_chars_in_buffer, - .set_termios = sierra_set_termios, .tiocmget = sierra_tiocmget, .tiocmset = sierra_tiocmset, .attach = sierra_startup, From 40d88983cee801cb9aef00e514b3ebf3a51f6c7e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:02 +0200 Subject: [PATCH 185/314] USB: sierra: remove disconnected test from close Remove no longer needed disconnected test from close, which is never called post disconnect (and drivers must handle failed I/O during disconnect anyway). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 854ac61581ba..74b417c91e30 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -772,16 +772,12 @@ static void sierra_close(struct usb_serial_port *port) portdata->rts_state = 0; portdata->dtr_state = 0; - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) { - /* odd error handling due to pm counters */ - if (!usb_autopm_get_interface(serial->interface)) - sierra_send_setup(port); - else - usb_autopm_get_interface_no_resume(serial->interface); + /* odd error handling due to pm counters */ + if (!usb_autopm_get_interface(serial->interface)) + sierra_send_setup(port); + else + usb_autopm_get_interface_no_resume(serial->interface); - } - mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; if (--intfdata->open_ports == 0) From a283d080a49a5014f525bf722e5a6a07835e45ef Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:03 +0200 Subject: [PATCH 186/314] USB: sierra: do not resume I/O on closed ports Do not resume any I/O, including the delayed write queue, on closed ports. Note that this currently has no functional impact due to the usb_autopm_get_interface() in close(), but that call is about to be removed by a follow-up patch. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 74b417c91e30..ac5e20d9bd24 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -1013,7 +1013,7 @@ static int sierra_resume(struct usb_serial *serial) port = serial->port[i]; portdata = usb_get_serial_port_data(port); - if (!portdata) + if (!portdata || !portdata->opened) continue; while ((urb = usb_get_from_anchor(&portdata->delayed))) { @@ -1036,11 +1036,9 @@ static int sierra_resume(struct usb_serial *serial) } } - if (portdata->opened) { - err = sierra_submit_rx_urbs(port, GFP_ATOMIC); - if (err) - ec++; - } + err = sierra_submit_rx_urbs(port, GFP_ATOMIC); + if (err) + ec++; } intfdata->suspended = 0; spin_unlock_irq(&intfdata->susp_lock); From 7cdc3355a75584f35eab89ea324375594a61e81f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:04 +0200 Subject: [PATCH 187/314] USB: sierra: remove redundant modem-control requests The tty-port implementation has already made sure that DTR/RTS have been raised and lowered by calling dtr_rts so remove the redundant calls from open and close. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ac5e20d9bd24..3a2f5b80d875 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -769,14 +769,7 @@ static void sierra_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - portdata->rts_state = 0; - portdata->dtr_state = 0; - - /* odd error handling due to pm counters */ - if (!usb_autopm_get_interface(serial->interface)) - sierra_send_setup(port); - else - usb_autopm_get_interface_no_resume(serial->interface); + usb_autopm_get_interface_no_resume(serial->interface); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; @@ -817,11 +810,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; - - endpoint = port->bulk_in_endpointAddress; for (i = 0; i < portdata->num_in_urbs; i++) { urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, @@ -837,8 +825,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) if (err) goto err_submit; - sierra_send_setup(port); - spin_lock_irq(&intfdata->susp_lock); portdata->opened = 1; if (++intfdata->open_ports == 1) From 7c80782ebf803b71009f2a3d97f722d12fc20b05 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:05 +0200 Subject: [PATCH 188/314] USB: sierra: use interface-data accessors Use usb_get_serial_data() rather than accessing the private pointer directly. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 3a2f5b80d875..4b6d0ff07ddd 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -425,7 +425,7 @@ static void sierra_outdat_callback(struct urb *urb) struct sierra_intf_private *intfdata; int status = urb->status; - intfdata = port->serial->private; + intfdata = usb_get_serial_data(port->serial); /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree(urb->transfer_buffer); @@ -462,7 +462,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; portdata = usb_get_serial_port_data(port); - intfdata = serial->private; + intfdata = usb_get_serial_data(serial); dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); spin_lock_irqsave(&portdata->lock, flags); @@ -764,7 +764,7 @@ static void sierra_close(struct usb_serial_port *port) int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - struct sierra_intf_private *intfdata = port->serial->private; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); struct urb *urb; portdata = usb_get_serial_port_data(port); @@ -802,7 +802,7 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) { struct sierra_port_private *portdata; struct usb_serial *serial = port->serial; - struct sierra_intf_private *intfdata = serial->private; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); int i; int err; int endpoint; @@ -968,7 +968,7 @@ static int sierra_suspend(struct usb_serial *serial, pm_message_t message) int b; if (PMSG_IS_AUTO(message)) { - intfdata = serial->private; + intfdata = usb_get_serial_data(serial); spin_lock_irq(&intfdata->susp_lock); b = intfdata->in_flight; @@ -988,7 +988,7 @@ static int sierra_suspend(struct usb_serial *serial, pm_message_t message) static int sierra_resume(struct usb_serial *serial) { struct usb_serial_port *port; - struct sierra_intf_private *intfdata = serial->private; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); struct sierra_port_private *portdata; struct urb *urb; int ec = 0; From 7d8825bed46a28688f97cc934ecb326cc4ce2d2e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:06 +0200 Subject: [PATCH 189/314] USB: sierra: clean up suspend Clean up suspend() somewhat and make sure to always set the suspended flag (although it's only used for runtime PM) in order to match resume(). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 4b6d0ff07ddd..1d42e8305b8e 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -964,22 +964,18 @@ static void stop_read_write_urbs(struct usb_serial *serial) static int sierra_suspend(struct usb_serial *serial, pm_message_t message) { - struct sierra_intf_private *intfdata; - int b; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); + spin_lock_irq(&intfdata->susp_lock); if (PMSG_IS_AUTO(message)) { - intfdata = usb_get_serial_data(serial); - spin_lock_irq(&intfdata->susp_lock); - b = intfdata->in_flight; - - if (b) { + if (intfdata->in_flight) { spin_unlock_irq(&intfdata->susp_lock); return -EBUSY; - } else { - intfdata->suspended = 1; - spin_unlock_irq(&intfdata->susp_lock); } } + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); + stop_read_write_urbs(serial); return 0; From 71c149b901e367db5dae1ec83bb82d14d01ad4cb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:07 +0200 Subject: [PATCH 190/314] USB: sierra: refactor delayed-urb submission Refactor and clean up delayed-urb submission at resume. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 63 +++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 20 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 1d42e8305b8e..967331964f36 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -981,12 +981,51 @@ static int sierra_suspend(struct usb_serial *serial, pm_message_t message) return 0; } +/* Caller must hold susp_lock. */ +static int sierra_submit_delayed_urbs(struct usb_serial_port *port) +{ + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; + struct urb *urb; + int ec = 0; + int err; + + intfdata = usb_get_serial_data(port->serial); + + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + dev_err(&port->dev, "%s - submit urb failed: %d", + __func__, err); + ec++; + intfdata->in_flight--; + usb_unanchor_urb(urb); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + + spin_lock(&portdata->lock); + portdata->outstanding_urbs--; + spin_unlock(&portdata->lock); + } + } + + if (ec) + return -EIO; + + return 0; +} + static int sierra_resume(struct usb_serial *serial) { struct usb_serial_port *port; struct sierra_intf_private *intfdata = usb_get_serial_data(serial); struct sierra_port_private *portdata; - struct urb *urb; int ec = 0; int i, err; @@ -998,25 +1037,9 @@ static int sierra_resume(struct usb_serial *serial) if (!portdata || !portdata->opened) continue; - while ((urb = usb_get_from_anchor(&portdata->delayed))) { - usb_anchor_urb(urb, &portdata->active); - intfdata->in_flight++; - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err < 0) { - dev_err(&port->dev, - "%s - submit urb failed: %d", - __func__, err); - ec++; - intfdata->in_flight--; - usb_unanchor_urb(urb); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - spin_lock(&portdata->lock); - portdata->outstanding_urbs--; - spin_unlock(&portdata->lock); - continue; - } - } + err = sierra_submit_delayed_urbs(port); + if (err) + ec++; err = sierra_submit_rx_urbs(port, GFP_ATOMIC); if (err) From 0287d5c5cda82ebe87e79e5a298f40f0ca05e5ef Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:08 +0200 Subject: [PATCH 191/314] USB: sierra: minimise no-suspend window during close Move usb_autopm_get_interface_no_resume to the end of close(). This makes the window during which suspend is prevented before the final put in USB serial core slightly smaller. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 967331964f36..be4a759b3aed 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -769,8 +769,6 @@ static void sierra_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - usb_autopm_get_interface_no_resume(serial->interface); - spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; if (--intfdata->open_ports == 0) @@ -796,6 +794,8 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } + + usb_autopm_get_interface_no_resume(serial->interface); } static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) From c2e45d704723723e5691c7b4bcd0ff4aeb813522 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:09 +0200 Subject: [PATCH 192/314] USB: sierra: do not resume I/O on closing ports Use tty-port initialised flag rather than private flag to determine when port is closing down. Since the tty-port flag is set prior to dropping DTR/RTS (when HUPCL is set) this avoid submitting the read urbs when resuming the interface in dtr_rts() only to immediately kill them again in shutdown(). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index be4a759b3aed..6f7f01eb556a 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -316,7 +316,6 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; - unsigned int opened:1; }; static int sierra_send_setup(struct usb_serial_port *port) @@ -769,8 +768,11 @@ static void sierra_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); + /* + * Need to take susp_lock to make sure port is not already being + * resumed, but no need to hold it due to ASYNC_INITIALIZED. + */ spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; if (--intfdata->open_ports == 0) serial->interface->needs_remote_wakeup = 0; spin_unlock_irq(&intfdata->susp_lock); @@ -826,7 +828,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) goto err_submit; spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 1; if (++intfdata->open_ports == 1) serial->interface->needs_remote_wakeup = 1; spin_unlock_irq(&intfdata->susp_lock); @@ -1025,16 +1026,14 @@ static int sierra_resume(struct usb_serial *serial) { struct usb_serial_port *port; struct sierra_intf_private *intfdata = usb_get_serial_data(serial); - struct sierra_port_private *portdata; int ec = 0; int i, err; spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - if (!portdata || !portdata->opened) + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) continue; err = sierra_submit_delayed_urbs(port); From acf47d4f9c39b1cba467aa9442fc2efe0b1da741 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:10 +0200 Subject: [PATCH 193/314] USB: option: fix runtime PM handling Fix potential I/O while runtime suspended due to missing PM operations in send_setup. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f213ee978516..802c0693e5c9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1923,6 +1923,7 @@ static int option_send_setup(struct usb_serial_port *port) struct option_private *priv = intfdata->private; struct usb_wwan_port_private *portdata; int val = 0; + int res; portdata = usb_get_serial_port_data(port); @@ -1931,9 +1932,17 @@ static int option_send_setup(struct usb_serial_port *port) if (portdata->rts_state) val |= 0x02; - return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_autopm_get_interface(serial->interface); + if (res) + return res; + + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, priv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); + + usb_autopm_put_interface(serial->interface); + + return res; } MODULE_AUTHOR(DRIVER_AUTHOR); From dd246f2c8c6be36fac10fc42157797429c6fdbb7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:11 +0200 Subject: [PATCH 194/314] USB: option: fix line-control pipe direction The option line-control request has been using the wrong pipe direction, while relying on USB core to fix it up. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 802c0693e5c9..2003a66c4807 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1936,7 +1936,7 @@ static int option_send_setup(struct usb_serial_port *port) if (res) return res; - res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, val, priv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); From 496969c64a618579f085a87310bc904eb190a71d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:12 +0200 Subject: [PATCH 195/314] USB: option: add missing usb_mark_last_busy We should call usb_mark_last_busy in all input paths, including the interrupt completion handler. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2003a66c4807..df91ea9243df 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1904,6 +1904,7 @@ static void option_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving IRQ data */ if (status != -ESHUTDOWN && status != -ENOENT) { + usb_mark_last_busy(port->serial->dev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_dbg(dev, "%s: resubmit intr urb failed. (%d)\n", From db0904737947d509844e171c9863ecc5b4534005 Mon Sep 17 00:00:00 2001 From: xiao jin Date: Mon, 26 May 2014 19:23:13 +0200 Subject: [PATCH 196/314] USB: usb_wwan: fix urb leak in write error path When enable usb serial for modem data, sometimes the tty is blocked in tty_wait_until_sent because portdata->out_busy always is set and have no chance to be cleared. We find a bug in write error path. usb_wwan_write set portdata->out_busy firstly, then try autopm async with error. No out urb submit and no usb_wwan_outdat_callback to this write, portdata->out_busy can't be cleared. This patch clear portdata->out_busy if usb_wwan_write try autopm async with error. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: xiao jin Signed-off-by: Zhang, Qi1 Reviewed-by: David Cohen Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b078440e822f..47ad7550c5a6 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -228,8 +228,10 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, usb_pipeendpoint(this_urb->pipe), i); err = usb_autopm_get_interface_async(port->serial->interface); - if (err < 0) + if (err < 0) { + clear_bit(i, &portdata->out_busy); break; + } /* send the data */ memcpy(this_urb->transfer_buffer, buf, todo); From d9e93c08d8d985e5ef89436ebc9f4aad7e31559f Mon Sep 17 00:00:00 2001 From: xiao jin Date: Mon, 26 May 2014 19:23:14 +0200 Subject: [PATCH 197/314] USB: usb_wwan: fix race between write and resume We find a race between write and resume. usb_wwan_resume run play_delayed() and spin_unlock, but intfdata->suspended still is not set to zero. At this time usb_wwan_write is called and anchor the urb to delay list. Then resume keep running but the delayed urb have no chance to be commit until next resume. If the time of next resume is far away, tty will be blocked in tty_wait_until_sent during time. The race also can lead to writes being reordered. This patch put play_Delayed and intfdata->suspended together in the spinlock, it's to avoid the write race during resume. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Signed-off-by: xiao jin Signed-off-by: Zhang, Qi1 Reviewed-by: David Cohen Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 47ad7550c5a6..112693a4100b 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -660,17 +660,15 @@ int usb_wwan_resume(struct usb_serial *serial) } } + spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { /* walk all ports */ port = serial->port[i]; portdata = usb_get_serial_port_data(port); /* skip closed ports */ - spin_lock_irq(&intfdata->susp_lock); - if (!portdata || !portdata->opened) { - spin_unlock_irq(&intfdata->susp_lock); + if (!portdata || !portdata->opened) continue; - } for (j = 0; j < N_IN_URB; j++) { urb = portdata->in_urbs[j]; @@ -683,9 +681,7 @@ int usb_wwan_resume(struct usb_serial *serial) } } play_delayed(port); - spin_unlock_irq(&intfdata->susp_lock); } - spin_lock_irq(&intfdata->susp_lock); intfdata->suspended = 0; spin_unlock_irq(&intfdata->susp_lock); err_out: From 170fad9e22df0063eba0701adb966786d7a4ec5a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:15 +0200 Subject: [PATCH 198/314] USB: usb_wwan: fix write and suspend race Fix race between write() and suspend() which could lead to writes being dropped (or I/O while suspended) if the device is runtime suspended while a write request is being processed. Specifically, suspend() releases the susp_lock after determining the device is idle but before setting the suspended flag, thus leaving a window where a concurrent write() can submit an urb. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 112693a4100b..2b8f02696c00 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -579,20 +579,17 @@ static void stop_read_write_urbs(struct usb_serial *serial) int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) { struct usb_wwan_intf_private *intfdata = serial->private; - int b; - - if (PMSG_IS_AUTO(message)) { - spin_lock_irq(&intfdata->susp_lock); - b = intfdata->in_flight; - spin_unlock_irq(&intfdata->susp_lock); - - if (b) - return -EBUSY; - } spin_lock_irq(&intfdata->susp_lock); + if (PMSG_IS_AUTO(message)) { + if (intfdata->in_flight) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; + } + } intfdata->suspended = 1; spin_unlock_irq(&intfdata->susp_lock); + stop_read_write_urbs(serial); return 0; From 79eed03e77d481b55d85d1cfe5a1636a0d3897fd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:16 +0200 Subject: [PATCH 199/314] USB: usb_wwan: fix urb leak at shutdown The delayed-write queue was never emptied at shutdown (close), something which could lead to leaked urbs if the port is closed before being runtime resumed due to a write. When this happens the output buffer would not drain on close (closing_wait timeout), and after consecutive opens, writes could be corrupted with previously buffered data, transfered with reduced throughput or completely blocked. Note that unbusy_queued_urb() was simply moved out of CONFIG_PM. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 2b8f02696c00..2ab478b55759 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -414,12 +414,26 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) } EXPORT_SYMBOL(usb_wwan_open); +static void unbusy_queued_urb(struct urb *urb, + struct usb_wwan_port_private *portdata) +{ + int i; + + for (i = 0; i < N_OUT_URB; i++) { + if (urb == portdata->out_urbs[i]) { + clear_bit(i, &portdata->out_busy); + break; + } + } +} + void usb_wwan_close(struct usb_serial_port *port) { int i; struct usb_serial *serial = port->serial; struct usb_wwan_port_private *portdata; struct usb_wwan_intf_private *intfdata = port->serial->private; + struct urb *urb; portdata = usb_get_serial_port_data(port); @@ -428,6 +442,14 @@ void usb_wwan_close(struct usb_serial_port *port) portdata->opened = 0; spin_unlock_irq(&intfdata->susp_lock); + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + unbusy_queued_urb(urb, portdata); + usb_autopm_put_interface_async(serial->interface); + } + for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) @@ -596,18 +618,6 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) } EXPORT_SYMBOL(usb_wwan_suspend); -static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata) -{ - int i; - - for (i = 0; i < N_OUT_URB; i++) { - if (urb == portdata->out_urbs[i]) { - clear_bit(i, &portdata->out_busy); - break; - } - } -} - static void play_delayed(struct usb_serial_port *port) { struct usb_wwan_intf_private *data; From 9096f1fbba916c2e052651e9de82fcfb98d4bea7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:17 +0200 Subject: [PATCH 200/314] USB: usb_wwan: fix potential NULL-deref at resume The interrupt urb was submitted unconditionally at resume, something which could lead to a NULL-pointer dereference in the urb completion handler as resume may be called after the port and port data is gone. Fix this by making sure the interrupt urb is only submitted and active when the port is open. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Cc: # v2.6.32: 032129cb03df Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 43 ++++++++++++++++------------------- 1 file changed, 19 insertions(+), 24 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 2ab478b55759..c5b9deb2e04e 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -388,6 +388,14 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); intfdata = serial->private; + if (port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) { + dev_dbg(&port->dev, "%s: submit int urb failed: %d\n", + __func__, err); + } + } + /* Start reading from the IN endpoint */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; @@ -454,6 +462,7 @@ void usb_wwan_close(struct usb_serial_port *port) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); + usb_kill_urb(port->interrupt_in_urb); /* balancing - important as an error cannot be handled*/ usb_autopm_get_interface_no_resume(serial->interface); @@ -487,7 +496,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port) struct usb_wwan_port_private *portdata; struct urb *urb; u8 *buffer; - int err; int i; if (!port->bulk_in_size || !port->bulk_out_size) @@ -527,13 +535,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, portdata); - if (port->interrupt_in_urb) { - err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (err) - dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n", - __func__, err); - } - return 0; bail_out_error2: @@ -651,22 +652,6 @@ int usb_wwan_resume(struct usb_serial *serial) struct urb *urb; int err = 0; - /* get the interrupt URBs resubmitted unconditionally */ - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - if (!port->interrupt_in_urb) { - dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__); - continue; - } - err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); - dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err); - if (err < 0) { - dev_err(&port->dev, "%s: Error %d for interrupt URB\n", - __func__, err); - goto err_out; - } - } - spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { /* walk all ports */ @@ -677,6 +662,16 @@ int usb_wwan_resume(struct usb_serial *serial) if (!portdata || !portdata->opened) continue; + if (port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, + GFP_ATOMIC); + if (err) { + dev_err(&port->dev, + "%s: submit int urb failed: %d\n", + __func__, err); + } + } + for (j = 0; j < N_IN_URB; j++) { urb = portdata->in_urbs[j]; err = usb_submit_urb(urb, GFP_ATOMIC); From fb7ad4f93d9f0f7d49beda32f5e7becb94b29a4d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:18 +0200 Subject: [PATCH 201/314] USB: usb_wwan: fix potential blocked I/O after resume Keep trying to submit urbs rather than bail out on first read-urb submission error, which would also prevent I/O for any further ports from being resumed. Instead keep an error count, for all types of failed submissions, and let USB core know that something went wrong. Also make sure to always clear the suspended flag. Currently a failed read-urb submission would prevent cached writes as well as any subsequent writes from being submitted until next suspend-resume cycle, something which may not even necessarily happen. Note that USB core currently only logs an error if an interface resume failed. Fixes: 383cedc3bb43 ("USB: serial: full autosuspend support for the option driver") Cc: # v2.6.32 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index c5b9deb2e04e..d91a9883e869 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -619,12 +619,12 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) } EXPORT_SYMBOL(usb_wwan_suspend); -static void play_delayed(struct usb_serial_port *port) +static int play_delayed(struct usb_serial_port *port) { struct usb_wwan_intf_private *data; struct usb_wwan_port_private *portdata; struct urb *urb; - int err; + int err = 0; portdata = usb_get_serial_port_data(port); data = port->serial->private; @@ -641,6 +641,8 @@ static void play_delayed(struct usb_serial_port *port) break; } } + + return err; } int usb_wwan_resume(struct usb_serial *serial) @@ -650,7 +652,8 @@ int usb_wwan_resume(struct usb_serial *serial) struct usb_wwan_intf_private *intfdata = serial->private; struct usb_wwan_port_private *portdata; struct urb *urb; - int err = 0; + int err; + int err_count = 0; spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { @@ -669,25 +672,31 @@ int usb_wwan_resume(struct usb_serial *serial) dev_err(&port->dev, "%s: submit int urb failed: %d\n", __func__, err); + err_count++; } } + err = play_delayed(port); + if (err) + err_count++; + for (j = 0; j < N_IN_URB; j++) { urb = portdata->in_urbs[j]; err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { dev_err(&port->dev, "%s: Error %d for bulk URB %d\n", __func__, err, i); - spin_unlock_irq(&intfdata->susp_lock); - goto err_out; + err_count++; } } - play_delayed(port); } intfdata->suspended = 0; spin_unlock_irq(&intfdata->susp_lock); -err_out: - return err; + + if (err_count) + return -EIO; + + return 0; } EXPORT_SYMBOL(usb_wwan_resume); #endif From 7436f41283ef2a45f8320ad482edd0aba1bd5843 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:19 +0200 Subject: [PATCH 202/314] USB: usb_wwan: fix discarded writes on resume errors There's no reason not to try sending off any further delayed write urbs, should one urb-submission fail. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index d91a9883e869..ab8c17536534 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -621,28 +621,33 @@ EXPORT_SYMBOL(usb_wwan_suspend); static int play_delayed(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct usb_wwan_intf_private *data; struct usb_wwan_port_private *portdata; struct urb *urb; - int err = 0; + int err_count = 0; + int err; portdata = usb_get_serial_port_data(port); data = port->serial->private; while ((urb = usb_get_from_anchor(&portdata->delayed))) { err = usb_submit_urb(urb, GFP_ATOMIC); - if (!err) { - data->in_flight++; - } else { - /* we have to throw away the rest */ - do { - unbusy_queued_urb(urb, portdata); - usb_autopm_put_interface_no_suspend(port->serial->interface); - } while ((urb = usb_get_from_anchor(&portdata->delayed))); - break; + if (err) { + dev_err(&port->dev, + "%s: submit write urb failed: %d\n", + __func__, err); + err_count++; + unbusy_queued_urb(urb, portdata); + usb_autopm_put_interface_async(serial->interface); + continue; } + data->in_flight++; } - return err; + if (err_count) + return -EIO; + + return 0; } int usb_wwan_resume(struct usb_serial *serial) From c1c0180340aa73e747744abd7e06239f261d4ade Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:20 +0200 Subject: [PATCH 203/314] USB: usb_wwan: fix remote wakeup Make sure that needs_remote_wake up is always set when there are open ports. Currently close() would unconditionally set needs_remote_wakeup to 0 even though there might still be open ports. This could lead to blocked input and possibly dropped data on devices that do not support remote wakeup (and which must therefore not be runtime suspended while open). Add an open_ports counter (protected by the susp_lock) and only clear needs_remote_wakeup when the last port is closed. Note that there are currently no multi-port drivers using the usb_wwan implementation. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-wwan.h | 1 + drivers/usb/serial/usb_wwan.c | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 684739b8efd0..aca45efbd674 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -39,6 +39,7 @@ struct usb_wwan_intf_private { spinlock_t susp_lock; unsigned int suspended:1; int in_flight; + unsigned int open_ports; int (*send_setup) (struct usb_serial_port *port); void *private; }; diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index ab8c17536534..daaa5d795946 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -411,9 +411,10 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) if (intfdata->send_setup) intfdata->send_setup(port); - serial->interface->needs_remote_wakeup = 1; spin_lock_irq(&intfdata->susp_lock); portdata->opened = 1; + if (++intfdata->open_ports == 1) + serial->interface->needs_remote_wakeup = 1; spin_unlock_irq(&intfdata->susp_lock); /* this balances a get in the generic USB serial code */ usb_autopm_put_interface(serial->interface); @@ -448,6 +449,8 @@ void usb_wwan_close(struct usb_serial_port *port) /* Stop reading/writing urbs */ spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; + if (--intfdata->open_ports == 0) + serial->interface->needs_remote_wakeup = 0; spin_unlock_irq(&intfdata->susp_lock); for (;;) { @@ -466,7 +469,6 @@ void usb_wwan_close(struct usb_serial_port *port) /* balancing - important as an error cannot be handled*/ usb_autopm_get_interface_no_resume(serial->interface); - serial->interface->needs_remote_wakeup = 0; } EXPORT_SYMBOL(usb_wwan_close); From 02803542b713060e6e05fcb88fa9258fd46985ca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:21 +0200 Subject: [PATCH 204/314] USB: usb_wwan: remove redundant modem-control request The tty-port implementation has already made sure that DTR/RTS have been raised by calling dtr_rts so remove the redundant call from open. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index daaa5d795946..9aeaccfd4f74 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -408,9 +408,6 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) } } - if (intfdata->send_setup) - intfdata->send_setup(port); - spin_lock_irq(&intfdata->susp_lock); portdata->opened = 1; if (++intfdata->open_ports == 1) From a427c179deb0fa3fa61126e137adb69c35273f24 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:22 +0200 Subject: [PATCH 205/314] USB: usb_wwan: remove unimplemented set_termios The driver does not implement set_termios so the operation can be left unset (tty will do the tty_termios_copy_hw for us). Note that the send_setup call is bogus as it really only sets DTR/RTS to their current values. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 - drivers/usb/serial/usb-wwan.h | 3 --- drivers/usb/serial/usb_wwan.c | 14 -------------- 3 files changed, 18 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index df91ea9243df..51e30740b2fe 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1729,7 +1729,6 @@ static struct usb_serial_driver option_1port_device = { .write = usb_wwan_write, .write_room = usb_wwan_write_room, .chars_in_buffer = usb_wwan_chars_in_buffer, - .set_termios = usb_wwan_set_termios, .tiocmget = usb_wwan_tiocmget, .tiocmset = usb_wwan_tiocmset, .ioctl = usb_wwan_ioctl, diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index aca45efbd674..dc379603c4b8 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -11,9 +11,6 @@ extern void usb_wwan_close(struct usb_serial_port *port); extern int usb_wwan_port_probe(struct usb_serial_port *port); extern int usb_wwan_port_remove(struct usb_serial_port *port); extern int usb_wwan_write_room(struct tty_struct *tty); -extern void usb_wwan_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old); extern int usb_wwan_tiocmget(struct tty_struct *tty); extern int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 9aeaccfd4f74..aa45985520f7 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -55,20 +55,6 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) } EXPORT_SYMBOL(usb_wwan_dtr_rts); -void usb_wwan_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) -{ - struct usb_wwan_intf_private *intfdata = port->serial->private; - - /* Doesn't support option setting */ - tty_termios_copy_hw(&tty->termios, old_termios); - - if (intfdata->send_setup) - intfdata->send_setup(port); -} -EXPORT_SYMBOL(usb_wwan_set_termios); - int usb_wwan_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; From 2b4aceabb1bde8fb205f4e947f2db4b1b7a0c2f9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:23 +0200 Subject: [PATCH 206/314] USB: usb_wwan: remove redundant urb kill from port remove Remove redundant usb_kill_urb from port remove, which is called post-shutdown (close). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index aa45985520f7..c4a815c1da5b 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -546,20 +546,17 @@ int usb_wwan_port_remove(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); usb_set_serial_port_data(port, NULL); - /* Stop reading/writing urbs and free them */ for (i = 0; i < N_IN_URB; i++) { - usb_kill_urb(portdata->in_urbs[i]); usb_free_urb(portdata->in_urbs[i]); free_page((unsigned long)portdata->in_buffer[i]); } for (i = 0; i < N_OUT_URB; i++) { - usb_kill_urb(portdata->out_urbs[i]); usb_free_urb(portdata->out_urbs[i]); kfree(portdata->out_buffer[i]); } - /* Now free port private data */ kfree(portdata); + return 0; } EXPORT_SYMBOL(usb_wwan_port_remove); From ae75c940181c3d4044f7b1adf07ada877ad9cb83 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:24 +0200 Subject: [PATCH 207/314] USB: usb_wwan: kill interrupt urb explicitly at suspend As the port interrupt URB is submitted by the subdriver at open, we should also kill it explicitly at suspend (even though this will be taken care of by USB serial core otherwise). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index c4a815c1da5b..b671d59e356e 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -562,7 +562,7 @@ int usb_wwan_port_remove(struct usb_serial_port *port) EXPORT_SYMBOL(usb_wwan_port_remove); #ifdef CONFIG_PM -static void stop_read_write_urbs(struct usb_serial *serial) +static void stop_urbs(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; @@ -578,6 +578,7 @@ static void stop_read_write_urbs(struct usb_serial *serial) usb_kill_urb(portdata->in_urbs[j]); for (j = 0; j < N_OUT_URB; j++) usb_kill_urb(portdata->out_urbs[j]); + usb_kill_urb(port->interrupt_in_urb); } } @@ -595,7 +596,7 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) intfdata->suspended = 1; spin_unlock_irq(&intfdata->susp_lock); - stop_read_write_urbs(serial); + stop_urbs(serial); return 0; } From b0f9d0030df8120713705c350fba8676f3556709 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:25 +0200 Subject: [PATCH 208/314] USB: usb_wwan: make resume error messages uniform Make resume error messages uniform. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b671d59e356e..3737006930c0 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -672,8 +672,9 @@ int usb_wwan_resume(struct usb_serial *serial) urb = portdata->in_urbs[j]; err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - dev_err(&port->dev, "%s: Error %d for bulk URB %d\n", - __func__, err, i); + dev_err(&port->dev, + "%s: submit read urb %d failed: %d\n", + __func__, i, err); err_count++; } } From 37357ca5a435258e6195051b8c336309ead5ea5e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:26 +0200 Subject: [PATCH 209/314] USB: usb_wwan: use interface-data accessors Use usb_get_serial_data() rather than accessing the private pointer directly. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 3737006930c0..b83aa60bbbdb 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -41,7 +41,7 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) struct usb_wwan_port_private *portdata; struct usb_wwan_intf_private *intfdata; - intfdata = port->serial->private; + intfdata = usb_get_serial_data(port->serial); if (!intfdata->send_setup) return; @@ -82,7 +82,7 @@ int usb_wwan_tiocmset(struct tty_struct *tty, struct usb_wwan_intf_private *intfdata; portdata = usb_get_serial_port_data(port); - intfdata = port->serial->private; + intfdata = usb_get_serial_data(port->serial); if (!intfdata->send_setup) return -EINVAL; @@ -191,7 +191,7 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, unsigned long flags; portdata = usb_get_serial_port_data(port); - intfdata = port->serial->private; + intfdata = usb_get_serial_data(port->serial); dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); @@ -302,7 +302,7 @@ static void usb_wwan_outdat_callback(struct urb *urb) int i; port = urb->context; - intfdata = port->serial->private; + intfdata = usb_get_serial_data(port->serial); usb_serial_port_softint(port); usb_autopm_put_interface_async(port->serial->interface); @@ -372,7 +372,7 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) struct urb *urb; portdata = usb_get_serial_port_data(port); - intfdata = serial->private; + intfdata = usb_get_serial_data(serial); if (port->interrupt_in_urb) { err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); @@ -424,7 +424,7 @@ void usb_wwan_close(struct usb_serial_port *port) int i; struct usb_serial *serial = port->serial; struct usb_wwan_port_private *portdata; - struct usb_wwan_intf_private *intfdata = port->serial->private; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct urb *urb; portdata = usb_get_serial_port_data(port); @@ -584,7 +584,7 @@ static void stop_urbs(struct usb_serial *serial) int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) { - struct usb_wwan_intf_private *intfdata = serial->private; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); spin_lock_irq(&intfdata->susp_lock); if (PMSG_IS_AUTO(message)) { @@ -605,14 +605,14 @@ EXPORT_SYMBOL(usb_wwan_suspend); static int play_delayed(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct usb_wwan_intf_private *data; + struct usb_wwan_intf_private *data = usb_get_serial_data(serial); struct usb_wwan_port_private *portdata; struct urb *urb; int err_count = 0; int err; portdata = usb_get_serial_port_data(port); - data = port->serial->private; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) { @@ -637,7 +637,7 @@ int usb_wwan_resume(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; - struct usb_wwan_intf_private *intfdata = serial->private; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); struct usb_wwan_port_private *portdata; struct urb *urb; int err; From 3362c91c7841f2e4ab5b1f018a5da0ecbc924894 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:27 +0200 Subject: [PATCH 210/314] USB: usb_wwan: clean up delayed-urb submission Clean up and rename delay-urb submission function using a more descriptive name. Also add comment on locking assumptions. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b83aa60bbbdb..45bc11b2d0ec 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -602,7 +602,8 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) } EXPORT_SYMBOL(usb_wwan_suspend); -static int play_delayed(struct usb_serial_port *port) +/* Caller must hold susp_lock. */ +static int usb_wwan_submit_delayed_urbs(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct usb_wwan_intf_private *data = usb_get_serial_data(serial); @@ -613,11 +614,14 @@ static int play_delayed(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - while ((urb = usb_get_from_anchor(&portdata->delayed))) { + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + err = usb_submit_urb(urb, GFP_ATOMIC); if (err) { - dev_err(&port->dev, - "%s: submit write urb failed: %d\n", + dev_err(&port->dev, "%s: submit urb failed: %d\n", __func__, err); err_count++; unbusy_queued_urb(urb, portdata); @@ -664,7 +668,7 @@ int usb_wwan_resume(struct usb_serial *serial) } } - err = play_delayed(port); + err = usb_wwan_submit_delayed_urbs(port); if (err) err_count++; From 9fdf7063ec9e239f309e79b65fc62fd8bfa9da5c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:28 +0200 Subject: [PATCH 211/314] USB: usb_wwan: remove comment from close Remove superfluous and cryptic comment from close. It should be obvious that we're balancing the autopm_put in open (and that operation already mentions the autopm_get done in the USB serial core). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 45bc11b2d0ec..5042faa5d588 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -450,7 +450,6 @@ void usb_wwan_close(struct usb_serial_port *port) usb_kill_urb(portdata->out_urbs[i]); usb_kill_urb(port->interrupt_in_urb); - /* balancing - important as an error cannot be handled*/ usb_autopm_get_interface_no_resume(serial->interface); } EXPORT_SYMBOL(usb_wwan_close); From 7d5dddda088ed054f1519d03f997346c03bfc778 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:29 +0200 Subject: [PATCH 212/314] USB: usb_wwan: remove some superfluous comments Remove some more outdated or superfluous comments. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 5042faa5d588..c951f75891c9 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -178,7 +178,6 @@ int usb_wwan_ioctl(struct tty_struct *tty, } EXPORT_SYMBOL(usb_wwan_ioctl); -/* Write */ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { @@ -429,7 +428,6 @@ void usb_wwan_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - /* Stop reading/writing urbs */ spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; if (--intfdata->open_ports == 0) @@ -454,7 +452,6 @@ void usb_wwan_close(struct usb_serial_port *port) } EXPORT_SYMBOL(usb_wwan_close); -/* Helper functions used by usb_wwan_setup_urbs */ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, int endpoint, int dir, void *ctx, char *buf, int len, @@ -467,7 +464,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, if (!urb) return NULL; - /* Fill URB using supplied data. */ usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, endpoint) | dir, buf, len, callback, ctx); @@ -567,7 +563,6 @@ static void stop_urbs(struct usb_serial *serial) struct usb_serial_port *port; struct usb_wwan_port_private *portdata; - /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); @@ -648,11 +643,9 @@ int usb_wwan_resume(struct usb_serial *serial) spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { - /* walk all ports */ port = serial->port[i]; portdata = usb_get_serial_port_data(port); - /* skip closed ports */ if (!portdata || !portdata->opened) continue; From 89da4a49b91c21616222437eec0cc010c60f4429 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:30 +0200 Subject: [PATCH 213/314] USB: usb_wwan: remove bogus function prototype The usb_wwan_send_setup() function has never existed. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-wwan.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index dc379603c4b8..8502f9add334 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -16,7 +16,6 @@ extern int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); extern int usb_wwan_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -extern int usb_wwan_send_setup(struct usb_serial_port *port); extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); extern int usb_wwan_chars_in_buffer(struct tty_struct *tty); From 8bb7ec65d600fd513aa94b50078a6329df612daa Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:31 +0200 Subject: [PATCH 214/314] USB: usb_wwan: report failed submissions as errors Promote failed-submission messages in open() and write() to error log level. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index c951f75891c9..bbcbdaa16c17 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -231,9 +231,9 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, spin_unlock_irqrestore(&intfdata->susp_lock, flags); err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err) { - dev_dbg(&port->dev, - "usb_submit_urb %p (write bulk) failed (%d)\n", - this_urb, err); + dev_err(&port->dev, + "%s: submit urb %d failed: %d\n", + __func__, i, err); clear_bit(i, &portdata->out_busy); spin_lock_irqsave(&intfdata->susp_lock, flags); intfdata->in_flight--; @@ -376,7 +376,7 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) if (port->interrupt_in_urb) { err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) { - dev_dbg(&port->dev, "%s: submit int urb failed: %d\n", + dev_err(&port->dev, "%s: submit int urb failed: %d\n", __func__, err); } } @@ -388,8 +388,9 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) continue; err = usb_submit_urb(urb, GFP_KERNEL); if (err) { - dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n", - __func__, i, err, urb->transfer_buffer_length); + dev_err(&port->dev, + "%s: submit read urb %d failed: %d\n", + __func__, i, err); } } From b0a9aa6da8088b722326a858ab572a13b5b6f9cb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:32 +0200 Subject: [PATCH 215/314] USB: usb_wwan: do not resume I/O on closing ports Use tty-port initialised flag rather than private flag to determine when port is closing down. Since the tty-port flag is set prior to dropping DTR/RTS (when HUPCL is set) this avoid submitting the read urbs when resuming the interface in dtr_rts() only to immediately kill them again in shutdown(). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-wwan.h | 1 - drivers/usb/serial/usb_wwan.c | 11 +++++++---- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 8502f9add334..f22dff58b587 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -48,7 +48,6 @@ struct usb_wwan_port_private { struct urb *out_urbs[N_OUT_URB]; u8 *out_buffer[N_OUT_URB]; unsigned long out_busy; /* Bit vector of URBs in use */ - int opened; struct usb_anchor delayed; /* Settings for the port */ diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index bbcbdaa16c17..2932d9cfb166 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -395,7 +395,6 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) } spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 1; if (++intfdata->open_ports == 1) serial->interface->needs_remote_wakeup = 1; spin_unlock_irq(&intfdata->susp_lock); @@ -429,8 +428,11 @@ void usb_wwan_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); + /* + * Need to take susp_lock to make sure port is not already being + * resumed, but no need to hold it due to ASYNC_INITIALIZED. + */ spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; if (--intfdata->open_ports == 0) serial->interface->needs_remote_wakeup = 0; spin_unlock_irq(&intfdata->susp_lock); @@ -645,11 +647,12 @@ int usb_wwan_resume(struct usb_serial *serial) spin_lock_irq(&intfdata->susp_lock); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - portdata = usb_get_serial_port_data(port); - if (!portdata || !portdata->opened) + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) continue; + portdata = usb_get_serial_port_data(port); + if (port->interrupt_in_urb) { err = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); From c14829fad88dbeda57253590695b85ba51270621 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:33 +0200 Subject: [PATCH 216/314] USB: serial: fix potential runtime pm imbalance at device remove Only call usb_autopm_put_interface() if the corresponding usb_autopm_get_interface() was successful. This prevents a potential runtime PM counter imbalance should usb_autopm_get_interface() fail. Note that the USB PM usage counter is reset when the interface is unbound, but that the runtime PM counter may be left unbalanced. Also add comment on why we don't need to worry about racing resume/suspend on autopm_get failures. Fixes: d5fd650cfc7f ("usb: serial: prevent suspend/resume from racing against probe/remove") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 35a2373cde67..9374bd2aba20 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -97,13 +97,19 @@ static int usb_serial_device_remove(struct device *dev) struct usb_serial_port *port; int retval = 0; int minor; + int autopm_err; port = to_usb_serial_port(dev); if (!port) return -ENODEV; - /* make sure suspend/resume doesn't race against port_remove */ - usb_autopm_get_interface(port->serial->interface); + /* + * Make sure suspend/resume doesn't race against port_remove. + * + * Note that no further runtime PM callbacks will be made if + * autopm_get fails. + */ + autopm_err = usb_autopm_get_interface(port->serial->interface); minor = port->minor; tty_unregister_device(usb_serial_tty_driver, minor); @@ -117,7 +123,9 @@ static int usb_serial_device_remove(struct device *dev) dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); - usb_autopm_put_interface(port->serial->interface); + if (!autopm_err) + usb_autopm_put_interface(port->serial->interface); + return retval; } From 3fff3b4343f45963c087976c772348f3051a40ee Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:34 +0200 Subject: [PATCH 217/314] USB: serial: remove overly defensive port tests The only way a port pointer may be NULL is if probe() failed, and in that case neither disconnect(), resume(), or reset_resume() will be called. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 38 ++++++++++++--------------------- 1 file changed, 14 insertions(+), 24 deletions(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 6d40d56378d7..02de3110fe94 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1060,6 +1060,7 @@ static void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial *serial = usb_get_intfdata(interface); struct device *dev = &interface->dev; struct usb_serial_port *port; + struct tty_struct *tty; usb_serial_console_disconnect(serial); @@ -1070,18 +1071,16 @@ static void usb_serial_disconnect(struct usb_interface *interface) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; - if (port) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } - usb_serial_port_poison_urbs(port); - wake_up_interruptible(&port->port.delta_msr_wait); - cancel_work_sync(&port->work); - if (device_is_registered(&port->dev)) - device_del(&port->dev); + tty = tty_port_tty_get(&port->port); + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); } + usb_serial_port_poison_urbs(port); + wake_up_interruptible(&port->port.delta_msr_wait); + cancel_work_sync(&port->work); + if (device_is_registered(&port->dev)) + device_del(&port->dev); } if (serial->type->disconnect) serial->type->disconnect(serial); @@ -1094,7 +1093,6 @@ static void usb_serial_disconnect(struct usb_interface *interface) int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) { struct usb_serial *serial = usb_get_intfdata(intf); - struct usb_serial_port *port; int i, r = 0; serial->suspending = 1; @@ -1112,12 +1110,8 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) } } - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - if (port) - usb_serial_port_poison_urbs(port); - } - + for (i = 0; i < serial->num_ports; ++i) + usb_serial_port_poison_urbs(serial->port[i]); err_out: return r; } @@ -1125,14 +1119,10 @@ EXPORT_SYMBOL(usb_serial_suspend); static void usb_serial_unpoison_port_urbs(struct usb_serial *serial) { - struct usb_serial_port *port; int i; - for (i = 0; i < serial->num_ports; ++i) { - port = serial->port[i]; - if (port) - usb_serial_port_unpoison_urbs(port); - } + for (i = 0; i < serial->num_ports; ++i) + usb_serial_port_unpoison_urbs(serial->port[i]); } int usb_serial_resume(struct usb_interface *intf) From 90419cfcb5d9c889b10dc51363c56a4d394d670e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:35 +0200 Subject: [PATCH 218/314] USB: kobil_sct: fix control requests without data stage Fix incorrect pipe directions and remove bogus data buffer arguments from control requests without data stage. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kobil_sct.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fee242387f55..078f9ed419c8 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -215,13 +215,13 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { /* Setting Baudrate, Parity and Stopbits */ result = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), + usb_sndctrlpipe(port->serial->dev, 0), SUSBCRequest_SetBaudRateParityAndStopBits, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity | SUSBCR_SPASB_1StopBit, 0, - transfer_buffer, + NULL, 0, KOBIL_TIMEOUT ); @@ -229,12 +229,12 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) /* reset all queues */ result = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), + usb_sndctrlpipe(port->serial->dev, 0), SUSBCRequest_Misc, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, SUSBCR_MSC_ResetAllQueues, 0, - transfer_buffer, + NULL, 0, KOBIL_TIMEOUT ); @@ -445,12 +445,12 @@ static int kobil_tiocmset(struct tty_struct *tty, else dev_dbg(dev, "%s - Clearing DTR\n", __func__); result = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), + usb_sndctrlpipe(port->serial->dev, 0), SUSBCRequest_SetStatusLinesOrQueues, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR), 0, - transfer_buffer, + NULL, 0, KOBIL_TIMEOUT); } else { @@ -459,12 +459,12 @@ static int kobil_tiocmset(struct tty_struct *tty, else dev_dbg(dev, "%s - Clearing RTS\n", __func__); result = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), + usb_sndctrlpipe(port->serial->dev, 0), SUSBCRequest_SetStatusLinesOrQueues, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, ((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS), 0, - transfer_buffer, + NULL, 0, KOBIL_TIMEOUT); } @@ -514,7 +514,7 @@ static void kobil_set_termios(struct tty_struct *tty, tty_encode_baud_rate(tty, speed, speed); result = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), + usb_sndctrlpipe(port->serial->dev, 0), SUSBCRequest_SetBaudRateParityAndStopBits, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, urb_val, @@ -546,12 +546,12 @@ static int kobil_ioctl(struct tty_struct *tty, return -ENOBUFS; result = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), + usb_sndctrlpipe(port->serial->dev, 0), SUSBCRequest_Misc, USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, SUSBCR_MSC_ResetAllQueues, 0, - NULL, /* transfer_buffer, */ + NULL, 0, KOBIL_TIMEOUT ); From 5a345c20c17d87099224a4be12e69e5bd7023dca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:36 +0200 Subject: [PATCH 219/314] USB: cdc-acm: fix write and suspend race Fix race between write() and suspend() which could lead to writes being dropped (or I/O while suspended) if the device is runtime suspended while a write request is being processed. Specifically, suspend() releases the write_lock after determining the device is idle but before incrementing the susp_count, thus leaving a window where a concurrent write() can submit an urb. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: # v2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 904efb6035b0..3bd4226c13dc 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1514,18 +1514,15 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) struct acm *acm = usb_get_intfdata(intf); int cnt; - if (PMSG_IS_AUTO(message)) { - int b; - - spin_lock_irq(&acm->write_lock); - b = acm->transmitting; - spin_unlock_irq(&acm->write_lock); - if (b) - return -EBUSY; - } - spin_lock_irq(&acm->read_lock); spin_lock(&acm->write_lock); + if (PMSG_IS_AUTO(message)) { + if (acm->transmitting) { + spin_unlock(&acm->write_lock); + spin_unlock_irq(&acm->read_lock); + return -EBUSY; + } + } cnt = acm->susp_count++; spin_unlock(&acm->write_lock); spin_unlock_irq(&acm->read_lock); From e144ed28bed10684f9aaec6325ed974d53f76110 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:37 +0200 Subject: [PATCH 220/314] USB: cdc-acm: fix write and resume race Fix race between write() and resume() due to improper locking that could lead to writes being reordered. Resume must be done atomically and susp_count be protected by the write_lock in order to prevent racing with write(). This could otherwise lead to writes being reordered if write() grabs the write_lock after susp_count is decremented, but before the delayed urb is submitted. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: # v2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 3bd4226c13dc..e72a657a6177 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1541,27 +1541,20 @@ static int acm_resume(struct usb_interface *intf) struct acm *acm = usb_get_intfdata(intf); struct acm_wb *wb; int rv = 0; - int cnt; spin_lock_irq(&acm->read_lock); - acm->susp_count -= 1; - cnt = acm->susp_count; - spin_unlock_irq(&acm->read_lock); + spin_lock(&acm->write_lock); - if (cnt) - return 0; + if (--acm->susp_count) + goto out; if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) { - rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); + rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC); - spin_lock_irq(&acm->write_lock); if (acm->delayed_wb) { wb = acm->delayed_wb; acm->delayed_wb = NULL; - spin_unlock_irq(&acm->write_lock); acm_start_wb(acm, wb); - } else { - spin_unlock_irq(&acm->write_lock); } /* @@ -1569,12 +1562,14 @@ static int acm_resume(struct usb_interface *intf) * do the write path at all cost */ if (rv < 0) - goto err_out; + goto out; - rv = acm_submit_read_urbs(acm, GFP_NOIO); + rv = acm_submit_read_urbs(acm, GFP_ATOMIC); } +out: + spin_unlock(&acm->write_lock); + spin_unlock_irq(&acm->read_lock); -err_out: return rv; } From 140cb81ac8c625942a1d695875932c615767a526 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:38 +0200 Subject: [PATCH 221/314] USB: cdc-acm: fix broken runtime suspend The current ACM runtime-suspend implementation is broken in several ways: Firstly, it buffers only the first write request being made while suspended -- any further writes are silently dropped. Secondly, writes being dropped also leak write urbs, which are never reclaimed (until the device is unbound). Thirdly, even the single buffered write is not cleared at shutdown (which may happen before the device is resumed), something which can lead to another urb leak as well as a PM usage-counter leak. Fix this by implementing a delayed-write queue using urb anchors and making sure to discard the queue properly at shutdown. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Reported-by: Xiao Jin Cc: # v2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 32 ++++++++++++++++++++++---------- drivers/usb/class/cdc-acm.h | 2 +- 2 files changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e72a657a6177..56419254ef75 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -573,6 +573,8 @@ static void acm_port_destruct(struct tty_port *port) static void acm_port_shutdown(struct tty_port *port) { struct acm *acm = container_of(port, struct acm, port); + struct urb *urb; + struct acm_wb *wb; int i; dev_dbg(&acm->control->dev, "%s\n", __func__); @@ -581,6 +583,16 @@ static void acm_port_shutdown(struct tty_port *port) if (!acm->disconnected) { usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); + + for (;;) { + urb = usb_get_from_anchor(&acm->delayed); + if (!urb) + break; + wb = urb->context; + wb->use = 0; + usb_autopm_put_interface_async(acm->control); + } + usb_kill_urb(acm->ctrlurb); for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); @@ -648,12 +660,9 @@ static int acm_tty_write(struct tty_struct *tty, usb_autopm_get_interface_async(acm->control); if (acm->susp_count) { - if (!acm->delayed_wb) - acm->delayed_wb = wb; - else - usb_autopm_put_interface_async(acm->control); + usb_anchor_urb(wb->urb, &acm->delayed); spin_unlock_irqrestore(&acm->write_lock, flags); - return count; /* A white lie */ + return count; } usb_mark_last_busy(acm->dev); @@ -1269,6 +1278,7 @@ made_compressed_probe: acm->bInterval = epread->bInterval; tty_port_init(&acm->port); acm->port.ops = &acm_port_ops; + init_usb_anchor(&acm->delayed); buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -1539,7 +1549,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) static int acm_resume(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); - struct acm_wb *wb; + struct urb *urb; int rv = 0; spin_lock_irq(&acm->read_lock); @@ -1551,10 +1561,12 @@ static int acm_resume(struct usb_interface *intf) if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) { rv = usb_submit_urb(acm->ctrlurb, GFP_ATOMIC); - if (acm->delayed_wb) { - wb = acm->delayed_wb; - acm->delayed_wb = NULL; - acm_start_wb(acm, wb); + for (;;) { + urb = usb_get_from_anchor(&acm->delayed); + if (!urb) + break; + + acm_start_wb(acm, urb->context); } /* diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index e38dc785808f..80826f843e04 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -120,7 +120,7 @@ struct acm { unsigned int throttled:1; /* actually throttled */ unsigned int throttle_req:1; /* throttle requested */ u8 bInterval; - struct acm_wb *delayed_wb; /* write queued for a device about to be woken */ + struct usb_anchor delayed; /* writes queued for a device about to be woken */ }; #define CDC_DATA_INTERFACE_TYPE 0x0a From bae3f4c53585e9a170da9436e0f06919874bda9a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:39 +0200 Subject: [PATCH 222/314] USB: cdc-acm: fix runtime PM for control messages Fix runtime PM handling of control messages by adding the required PM counter operations. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: # v2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 56419254ef75..2258827df084 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -122,13 +122,23 @@ static void acm_release_minor(struct acm *acm) static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len) { - int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), + int retval; + + retval = usb_autopm_get_interface(acm->control); + if (retval) + return retval; + + retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), request, USB_RT_ACM, value, acm->control->altsetting[0].desc.bInterfaceNumber, buf, len, 5000); + dev_dbg(&acm->control->dev, "%s - rq 0x%02x, val %#x, len %#x, result %d\n", __func__, request, value, len, retval); + + usb_autopm_put_interface(acm->control); + return retval < 0 ? retval : 0; } From ed797074031a37bb9bf4a70952fffc606b77274d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:40 +0200 Subject: [PATCH 223/314] USB: cdc-acm: fix shutdown and suspend race We should stop I/O unconditionally at suspend rather than rely on the tty-port initialised flag (which is set prior to stopping I/O during shutdown) in order to prevent suspend returning with URBs still active. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: # v2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 2258827df084..1ac6c5dda9f7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1550,8 +1550,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) if (cnt) return 0; - if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) - stop_data_traffic(acm); + stop_data_traffic(acm); return 0; } From 183a45087d126d126e8dd1d9b2602fc129dff9ad Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:41 +0200 Subject: [PATCH 224/314] USB: cdc-acm: fix potential urb leak and PM imbalance in write Make sure to check return value of autopm get in write() in order to avoid urb leak and PM counter imbalance on errors. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: # v2.6.27 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 1ac6c5dda9f7..c255e77282ad 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -668,7 +668,13 @@ static int acm_tty_write(struct tty_struct *tty, memcpy(wb->buf, buf, count); wb->len = count; - usb_autopm_get_interface_async(acm->control); + stat = usb_autopm_get_interface_async(acm->control); + if (stat) { + wb->use = 0; + spin_unlock_irqrestore(&acm->write_lock, flags); + return stat; + } + if (acm->susp_count) { usb_anchor_urb(wb->urb, &acm->delayed); spin_unlock_irqrestore(&acm->write_lock, flags); From 703df3297fb1950b0aa53e656108eb936d3f21d9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:42 +0200 Subject: [PATCH 225/314] USB: cdc-acm: fix open and suspend race We must not do the usb_autopm_put_interface() before submitting the read urbs or we might end up doing I/O to a suspended device. Fixes: 088c64f81284 ("USB: cdc-acm: re-write read processing") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c255e77282ad..74df311c8505 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -528,19 +528,15 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) { dev_err(&acm->control->dev, "%s - usb_submit_urb(ctrl irq) failed\n", __func__); - usb_autopm_put_interface(acm->control); goto error_submit_urb; } acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS; if (acm_set_control(acm, acm->ctrlout) < 0 && (acm->ctrl_caps & USB_CDC_CAP_LINE)) { - usb_autopm_put_interface(acm->control); goto error_set_control; } - usb_autopm_put_interface(acm->control); - /* * Unthrottle device in case the TTY was closed while throttled. */ @@ -552,6 +548,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) if (acm_submit_read_urbs(acm, GFP_KERNEL)) goto error_submit_read_urbs; + usb_autopm_put_interface(acm->control); + mutex_unlock(&acm->mutex); return 0; @@ -562,6 +560,7 @@ error_submit_read_urbs: error_set_control: usb_kill_urb(acm->ctrlurb); error_submit_urb: + usb_autopm_put_interface(acm->control); error_get_interface: disconnected: mutex_unlock(&acm->mutex); From 8727bf689a77a79816065e23a7a58a474ad544f9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:43 +0200 Subject: [PATCH 226/314] USB: cdc-acm: fix failed open not being detected Fix errors during open not being returned to userspace. Specifically, failed control-line manipulations or control or read urb submissions would not be detected. Fixes: 7fb57a019f94 ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 74df311c8505..6c6928a154bd 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -525,17 +525,17 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) acm->control->needs_remote_wakeup = 1; acm->ctrlurb->dev = acm->dev; - if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) { + retval = usb_submit_urb(acm->ctrlurb, GFP_KERNEL); + if (retval) { dev_err(&acm->control->dev, "%s - usb_submit_urb(ctrl irq) failed\n", __func__); goto error_submit_urb; } acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS; - if (acm_set_control(acm, acm->ctrlout) < 0 && - (acm->ctrl_caps & USB_CDC_CAP_LINE)) { + retval = acm_set_control(acm, acm->ctrlout); + if (retval < 0 && (acm->ctrl_caps & USB_CDC_CAP_LINE)) goto error_set_control; - } /* * Unthrottle device in case the TTY was closed while throttled. @@ -545,7 +545,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) acm->throttle_req = 0; spin_unlock_irq(&acm->read_lock); - if (acm_submit_read_urbs(acm, GFP_KERNEL)) + retval = acm_submit_read_urbs(acm, GFP_KERNEL); + if (retval) goto error_submit_read_urbs; usb_autopm_put_interface(acm->control); @@ -564,7 +565,8 @@ error_submit_urb: error_get_interface: disconnected: mutex_unlock(&acm->mutex); - return retval; + + return usb_translate_errors(retval); } static void acm_port_destruct(struct tty_port *port) From e4c36076c2a6195ec62c35b03c3fde84d0087dc8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:44 +0200 Subject: [PATCH 227/314] USB: cdc-acm: fix I/O after failed open Make sure to kill any already submitted read urbs on read-urb submission failures in open in order to prevent doing I/O for a closed port. Fixes: 088c64f81284 ("USB: cdc-acm: re-write read processing") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6c6928a154bd..eddeba61a88c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -506,6 +506,7 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) { struct acm *acm = container_of(port, struct acm, port); int retval = -ENODEV; + int i; dev_dbg(&acm->control->dev, "%s\n", __func__); @@ -556,6 +557,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) return 0; error_submit_read_urbs: + for (i = 0; i < acm->rx_buflimit; i++) + usb_kill_urb(acm->read_urbs[i]); acm->ctrlout = 0; acm_set_control(acm, acm->ctrlout); error_set_control: From 5292afa657d0e790b7479ad8eef9450c1e040b3d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:45 +0200 Subject: [PATCH 228/314] USB: cdc-acm: fix runtime PM imbalance at shutdown Make sure only to decrement the PM counters if they were actually incremented. Note that the USB PM counter, but not necessarily the driver core PM counter, is reset when the interface is unbound. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index eddeba61a88c..6bbd203f1861 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -590,12 +590,13 @@ static void acm_port_shutdown(struct tty_port *port) struct urb *urb; struct acm_wb *wb; int i; + int pm_err; dev_dbg(&acm->control->dev, "%s\n", __func__); mutex_lock(&acm->mutex); if (!acm->disconnected) { - usb_autopm_get_interface(acm->control); + pm_err = usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); for (;;) { @@ -613,7 +614,8 @@ static void acm_port_shutdown(struct tty_port *port) for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->read_urbs[i]); acm->control->needs_remote_wakeup = 0; - usb_autopm_put_interface(acm->control); + if (!pm_err) + usb_autopm_put_interface(acm->control); } mutex_unlock(&acm->mutex); } From bbf0cb3e93a1b6ef8bf22a67f35d7c98ef378f2b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:46 +0200 Subject: [PATCH 229/314] USB: cdc-acm: simplify runtime PM locking We can simply the runtime PM locking as there's no need to check the susp_count in the read path (at least not since killing the rx tasklet). Specifically, the read urbs will never be resubmitted by the completion handler when killed during suspend. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6bbd203f1861..bc7a2a6fc4ac 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -428,7 +428,7 @@ static void acm_read_bulk_callback(struct urb *urb) /* throttle device if requested by tty */ spin_lock_irqsave(&acm->read_lock, flags); acm->throttled = acm->throttle_req; - if (!acm->throttled && !acm->susp_count) { + if (!acm->throttled) { spin_unlock_irqrestore(&acm->read_lock, flags); acm_submit_read_urb(acm, rb->index, GFP_ATOMIC); } else { @@ -1546,18 +1546,15 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) struct acm *acm = usb_get_intfdata(intf); int cnt; - spin_lock_irq(&acm->read_lock); - spin_lock(&acm->write_lock); + spin_lock_irq(&acm->write_lock); if (PMSG_IS_AUTO(message)) { if (acm->transmitting) { - spin_unlock(&acm->write_lock); - spin_unlock_irq(&acm->read_lock); + spin_unlock_irq(&acm->write_lock); return -EBUSY; } } cnt = acm->susp_count++; - spin_unlock(&acm->write_lock); - spin_unlock_irq(&acm->read_lock); + spin_unlock_irq(&acm->write_lock); if (cnt) return 0; @@ -1573,8 +1570,7 @@ static int acm_resume(struct usb_interface *intf) struct urb *urb; int rv = 0; - spin_lock_irq(&acm->read_lock); - spin_lock(&acm->write_lock); + spin_lock_irq(&acm->write_lock); if (--acm->susp_count) goto out; @@ -1600,8 +1596,7 @@ static int acm_resume(struct usb_interface *intf) rv = acm_submit_read_urbs(acm, GFP_ATOMIC); } out: - spin_unlock(&acm->write_lock); - spin_unlock_irq(&acm->read_lock); + spin_unlock_irq(&acm->write_lock); return rv; } From 89e54e4468338df5a4ab7627c5b8b10786ee43e8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:47 +0200 Subject: [PATCH 230/314] USB: cdc-acm: remove redundant disconnected test from shutdown Remove redundant disconnect test from shutdown(), which is never called post disconnect() where we do synchronous hangup. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 41 +++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index bc7a2a6fc4ac..91fdc293196f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -594,30 +594,27 @@ static void acm_port_shutdown(struct tty_port *port) dev_dbg(&acm->control->dev, "%s\n", __func__); - mutex_lock(&acm->mutex); - if (!acm->disconnected) { - pm_err = usb_autopm_get_interface(acm->control); - acm_set_control(acm, acm->ctrlout = 0); + pm_err = usb_autopm_get_interface(acm->control); + acm_set_control(acm, acm->ctrlout = 0); - for (;;) { - urb = usb_get_from_anchor(&acm->delayed); - if (!urb) - break; - wb = urb->context; - wb->use = 0; - usb_autopm_put_interface_async(acm->control); - } - - usb_kill_urb(acm->ctrlurb); - for (i = 0; i < ACM_NW; i++) - usb_kill_urb(acm->wb[i].urb); - for (i = 0; i < acm->rx_buflimit; i++) - usb_kill_urb(acm->read_urbs[i]); - acm->control->needs_remote_wakeup = 0; - if (!pm_err) - usb_autopm_put_interface(acm->control); + for (;;) { + urb = usb_get_from_anchor(&acm->delayed); + if (!urb) + break; + wb = urb->context; + wb->use = 0; + usb_autopm_put_interface_async(acm->control); } - mutex_unlock(&acm->mutex); + + usb_kill_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_kill_urb(acm->wb[i].urb); + for (i = 0; i < acm->rx_buflimit; i++) + usb_kill_urb(acm->read_urbs[i]); + + acm->control->needs_remote_wakeup = 0; + if (!pm_err) + usb_autopm_put_interface(acm->control); } static void acm_tty_cleanup(struct tty_struct *tty) From b1d42efc217fdc1a6a704b344fd902ae52a012c8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:48 +0200 Subject: [PATCH 231/314] USB: cdc-acm: minimise no-suspend window during shutdown Now that acm_set_control() handles runtime PM properly, the only remaining reason for the PM operations in shutdown is to clear the needs_remote_wakeup flag before the final put. Note that this also means that we now need to grab the write_lock to prevent racing with resume. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 91fdc293196f..f038f390db97 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -590,13 +590,22 @@ static void acm_port_shutdown(struct tty_port *port) struct urb *urb; struct acm_wb *wb; int i; - int pm_err; dev_dbg(&acm->control->dev, "%s\n", __func__); - pm_err = usb_autopm_get_interface(acm->control); acm_set_control(acm, acm->ctrlout = 0); + /* + * Need to grab write_lock to prevent race with resume, but no need to + * hold it due to the tty-port initialised flag. + */ + spin_lock_irq(&acm->write_lock); + spin_unlock_irq(&acm->write_lock); + + usb_autopm_get_interface_no_resume(acm->control); + acm->control->needs_remote_wakeup = 0; + usb_autopm_put_interface(acm->control); + for (;;) { urb = usb_get_from_anchor(&acm->delayed); if (!urb) @@ -611,10 +620,6 @@ static void acm_port_shutdown(struct tty_port *port) usb_kill_urb(acm->wb[i].urb); for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->read_urbs[i]); - - acm->control->needs_remote_wakeup = 0; - if (!pm_err) - usb_autopm_put_interface(acm->control); } static void acm_tty_cleanup(struct tty_struct *tty) From 4a8ee5059a241114c644350b6cb564c729a340fa Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:49 +0200 Subject: [PATCH 232/314] USB: cdc-acm: do not update PM busy on read errors There's no need to update the runtime PM last_busy field on read urb errors (e.g. when the urb is being killed on shutdown). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f038f390db97..3c7cfac48e30 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -416,13 +416,15 @@ static void acm_read_bulk_callback(struct urb *urb) dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__); return; } - usb_mark_last_busy(acm->dev); if (urb->status) { dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n", __func__, urb->status); return; } + + usb_mark_last_busy(acm->dev); + acm_process_read_urb(acm, urb); /* throttle device if requested by tty */ From 308fee18e0f06215b47b54a2b254bfaf55527bdd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:50 +0200 Subject: [PATCH 233/314] USB: cdc-acm: remove redundant usb_mark_last_busy There's no need to call usb_mark_last_busy after having increased the PM counter in write(). The device will be marked busy by USB core when the PM counter is balanced in the completion handler. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 3c7cfac48e30..8f654ce52570 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -690,7 +690,6 @@ static int acm_tty_write(struct tty_struct *tty, spin_unlock_irqrestore(&acm->write_lock, flags); return count; } - usb_mark_last_busy(acm->dev); stat = acm_start_wb(acm, wb); spin_unlock_irqrestore(&acm->write_lock, flags); From 0943d8ead30e9474034cc5e92225ab0fd29fd0d4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:51 +0200 Subject: [PATCH 234/314] USB: cdc-acm: use tty-port dtr_rts Add dtr_rts tty-port operation which implements proper DTR/RTS handling (e.g. only lower DTR/RTS during shutdown if HUPCL is set). Note that modem-control locking still needs to be added throughout the driver. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 8f654ce52570..e934e19f49f5 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -504,6 +504,25 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) return tty_port_open(&acm->port, tty, filp); } +static void acm_port_dtr_rts(struct tty_port *port, int raise) +{ + struct acm *acm = container_of(port, struct acm, port); + int val; + int res; + + if (raise) + val = ACM_CTRL_DTR | ACM_CTRL_RTS; + else + val = 0; + + /* FIXME: add missing ctrlout locking throughout driver */ + acm->ctrlout = val; + + res = acm_set_control(acm, val); + if (res && (acm->ctrl_caps & USB_CDC_CAP_LINE)) + dev_err(&acm->control->dev, "failed to set dtr/rts\n"); +} + static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) { struct acm *acm = container_of(port, struct acm, port); @@ -535,11 +554,6 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) goto error_submit_urb; } - acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS; - retval = acm_set_control(acm, acm->ctrlout); - if (retval < 0 && (acm->ctrl_caps & USB_CDC_CAP_LINE)) - goto error_set_control; - /* * Unthrottle device in case the TTY was closed while throttled. */ @@ -561,9 +575,6 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) error_submit_read_urbs: for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->read_urbs[i]); - acm->ctrlout = 0; - acm_set_control(acm, acm->ctrlout); -error_set_control: usb_kill_urb(acm->ctrlurb); error_submit_urb: usb_autopm_put_interface(acm->control); @@ -595,8 +606,6 @@ static void acm_port_shutdown(struct tty_port *port) dev_dbg(&acm->control->dev, "%s\n", __func__); - acm_set_control(acm, acm->ctrlout = 0); - /* * Need to grab write_lock to prevent race with resume, but no need to * hold it due to the tty-port initialised flag. @@ -992,6 +1001,7 @@ static void acm_tty_set_termios(struct tty_struct *tty, } static const struct tty_port_operations acm_port_ops = { + .dtr_rts = acm_port_dtr_rts, .shutdown = acm_port_shutdown, .activate = acm_port_activate, .destruct = acm_port_destruct, @@ -1429,8 +1439,6 @@ skip_countries: dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); - acm_set_control(acm, acm->ctrlout); - acm->line.dwDTERate = cpu_to_le32(9600); acm->line.bDataBits = 8; acm_set_line(acm, &acm->line); From df3ce23a56654bbf08e0c36ab1690cd8316a53c4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 26 May 2014 19:23:52 +0200 Subject: [PATCH 235/314] USB: wusbcore: fix control-pipe directions Fix incorrect pipe directions in control requests (which has been silently fixed up by USB core). Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/wusbcore/wa-rpipe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c index 6d6da127f6de..a80c5d284b59 100644 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -524,7 +524,7 @@ void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep) u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), USB_REQ_RPIPE_ABORT, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT); @@ -545,7 +545,7 @@ void rpipe_clear_feature_stalled(struct wahc *wa, struct usb_host_endpoint *ep) u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), USB_REQ_CLEAR_FEATURE, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, RPIPE_STALL, index, NULL, 0, USB_CTRL_SET_TIMEOUT); From d5afce82e131eb5a171afeba0bc5fefbe2417ad9 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Fri, 16 May 2014 17:39:13 +0200 Subject: [PATCH 236/314] USB: keyspan: fix potential null pointer dereference Move control-urb dereference to after NULL-check. There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. [Johan: modify commit message somewhat ] [gkh: remove stable tag as it's not a real problem that anyone has ever hit] Signed-off-by: Rickard Strandqvist Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index d3acaead5a81..93cb7cebda62 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1535,14 +1535,14 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, this_urb = p_priv->outcont_urb; - dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); - /* Make sure we have an urb then send the message */ if (this_urb == NULL) { dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); return -1; } + dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); + /* Save reset port val for resend. Don't overwrite resend for open/close condition. */ if ((reset_port + 1) > p_priv->resend_cont) From febf2f63c1d8b4e622730f52202b9d0374a6c058 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Mon, 28 Apr 2014 19:35:09 +0800 Subject: [PATCH 237/314] usb: remove redundant D0 power state set Pci_enable_device() will set device power state to D0, so it's no need to do it again after call pci_enable_device(). Signed-off-by: Yijing Wang Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 1f02e65fe305..82044b5d6113 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -192,7 +192,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (pci_enable_device(dev) < 0) return -ENODEV; - dev->current_state = PCI_D0; /* * The xHCI driver has its own irq management From a838ec7b0293ba0cdcda9b75cf428c93beea927c Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 28 Apr 2014 14:12:38 +0800 Subject: [PATCH 238/314] usb: core: remove the Kconfig entry for USB_DEBUG Since we have already removed the usage of CONFIG_USB_DEBUG, it is meaningless that there is still a configuration entry for CONFIG_USB_DEBUG. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/Kconfig | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index cb8e99156f5a..9519878587f6 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -1,13 +1,6 @@ # # USB Core configuration # -config USB_DEBUG - bool "USB verbose debug messages" - help - Say Y here if you want the USB core & hub drivers to produce a bunch - of debug messages to the system log. Select this if you are having a - problem with USB support and want to see more of what is going on. - config USB_ANNOUNCE_NEW_DEVICES bool "USB announce new devices" help From d339a1f2ff9b51bc195c6233978b1eb32164bbca Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Mon, 28 Apr 2014 14:53:25 -0500 Subject: [PATCH 239/314] uwb: whitespace and line length cleanups Fix whitespace and line length issues reported by checkpatch. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/drp.c | 294 ++++++++++++++++++++++++++-------------------- 1 file changed, 166 insertions(+), 128 deletions(-) diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c index 468c89fb6a16..05b7bd762254 100644 --- a/drivers/uwb/drp.c +++ b/drivers/uwb/drp.c @@ -29,19 +29,19 @@ enum uwb_drp_conflict_action { /* Reservation is maintained, no action needed */ UWB_DRP_CONFLICT_MANTAIN = 0, - + /* the device shall not transmit frames in conflicting MASs in * the following superframe. If the device is the reservation * target, it shall also set the Reason Code in its DRP IE to * Conflict in its beacon in the following superframe. */ UWB_DRP_CONFLICT_ACT1, - + /* the device shall not set the Reservation Status bit to ONE * and shall not transmit frames in conflicting MASs. If the * device is the reservation target, it shall also set the * Reason Code in its DRP IE to Conflict. - */ + */ UWB_DRP_CONFLICT_ACT2, /* the device shall not transmit frames in conflicting MASs in @@ -115,7 +115,8 @@ int uwb_rc_send_all_drp_ie(struct uwb_rc *rc) if (uwb_rsv_has_two_drp_ies(rsv) && (rsv->mv.companion_drp_ie != NULL)) { mv = &rsv->mv; - num_bytes += mv->companion_drp_ie->hdr.length + 2; + num_bytes += + mv->companion_drp_ie->hdr.length + 2; } } } @@ -139,21 +140,23 @@ int uwb_rc_send_all_drp_ie(struct uwb_rc *rc) memcpy(IEDataptr, rsv->drp_ie, rsv->drp_ie->hdr.length + 2); IEDataptr += rsv->drp_ie->hdr.length + 2; - + if (uwb_rsv_has_two_drp_ies(rsv) && (rsv->mv.companion_drp_ie != NULL)) { mv = &rsv->mv; memcpy(IEDataptr, mv->companion_drp_ie, mv->companion_drp_ie->hdr.length + 2); - IEDataptr += mv->companion_drp_ie->hdr.length + 2; + IEDataptr += + mv->companion_drp_ie->hdr.length + 2; } } } - result = uwb_rc_cmd_async(rc, "SET-DRP-IE", &cmd->rccb, sizeof(*cmd) + num_bytes, - UWB_RC_CET_GENERAL, UWB_RC_CMD_SET_DRP_IE, - uwb_rc_set_drp_cmd_done, NULL); - + result = uwb_rc_cmd_async(rc, "SET-DRP-IE", + &cmd->rccb, sizeof(*cmd) + num_bytes, + UWB_RC_CET_GENERAL, UWB_RC_CMD_SET_DRP_IE, + uwb_rc_set_drp_cmd_done, NULL); + rc->set_drp_ie_pending = 1; kfree(cmd); @@ -176,8 +179,8 @@ static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beaco int ext_tie_breaker = uwb_ie_drp_tiebreaker(ext_drp_ie); int ext_status = uwb_ie_drp_status(ext_drp_ie); int ext_type = uwb_ie_drp_type(ext_drp_ie); - - + + /* [ECMA-368 2nd Edition] 17.4.6 */ if (ext_type == UWB_DRP_TYPE_PCA && our_type == UWB_DRP_TYPE_PCA) { return UWB_DRP_CONFLICT_MANTAIN; @@ -187,7 +190,7 @@ static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beaco if (our_type == UWB_DRP_TYPE_ALIEN_BP) { return UWB_DRP_CONFLICT_MANTAIN; } - + /* [ECMA-368 2nd Edition] 17.4.6-2 */ if (ext_type == UWB_DRP_TYPE_ALIEN_BP) { /* here we know our_type != UWB_DRP_TYPE_ALIEN_BP */ @@ -215,7 +218,7 @@ static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beaco our_beacon_slot > ext_beacon_slot) { return UWB_DRP_CONFLICT_MANTAIN; } - + if (our_status == 0) { if (our_tie_breaker == ext_tie_breaker) { /* [ECMA-368 2nd Edition] 17.4.6-6a */ @@ -244,9 +247,9 @@ static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beaco return UWB_DRP_CONFLICT_MANTAIN; } -static void handle_conflict_normal(struct uwb_ie_drp *drp_ie, - int ext_beacon_slot, - struct uwb_rsv *rsv, +static void handle_conflict_normal(struct uwb_ie_drp *drp_ie, + int ext_beacon_slot, + struct uwb_rsv *rsv, struct uwb_mas_bm *conflicting_mas) { struct uwb_rc *rc = rsv->rc; @@ -263,7 +266,7 @@ static void handle_conflict_normal(struct uwb_ie_drp *drp_ie, uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_TO_BE_MOVED); if (bow->can_reserve_extra_mases == false) uwb_rsv_backoff_win_increment(rc); - + break; case UWB_DRP_CONFLICT_ACT3: uwb_rsv_backoff_win_increment(rc); @@ -278,13 +281,13 @@ static void handle_conflict_normal(struct uwb_ie_drp *drp_ie, switch(action) { case UWB_DRP_CONFLICT_ACT2: case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); + uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); default: break; } } - + } static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_slot, @@ -295,7 +298,7 @@ static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_ struct uwb_drp_backoff_win *bow = &rc->bow; struct uwb_rsv_move *mv = &rsv->mv; int action; - + if (companion_only) { /* status of companion is 0 at this point */ action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, 0); @@ -303,21 +306,24 @@ static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_ switch(action) { case UWB_DRP_CONFLICT_ACT2: case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + uwb_rsv_set_state(rsv, + UWB_RSV_STATE_O_ESTABLISHED); rsv->needs_release_companion_mas = false; if (bow->can_reserve_extra_mases == false) uwb_rsv_backoff_win_increment(rc); - uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas); + uwb_drp_avail_release(rsv->rc, + &rsv->mv.companion_mas); } - } else { /* rsv is target */ + } else { /* rsv is target */ switch(action) { case UWB_DRP_CONFLICT_ACT2: case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_EXPANDING_CONFLICT); + uwb_rsv_set_state(rsv, + UWB_RSV_STATE_T_EXPANDING_CONFLICT); /* send_drp_avail_ie = true; */ } } - } else { /* also base part of the reservation is conflicting */ + } else { /* also base part of the reservation is conflicting */ if (uwb_rsv_is_owner(rsv)) { uwb_rsv_backoff_win_increment(rc); /* remove companion part */ @@ -326,7 +332,8 @@ static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_ /* drop some mases with reason modified */ /* put in the companion the mases to be dropped */ - bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS); + bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, + conflicting_mas->bm, UWB_NUM_MAS); uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED); } else { /* it is a target rsv */ uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); @@ -336,7 +343,7 @@ static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_ } static void uwb_drp_handle_conflict_rsv(struct uwb_rc *rc, struct uwb_rsv *rsv, - struct uwb_rc_evt_drp *drp_evt, + struct uwb_rc_evt_drp *drp_evt, struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *conflicting_mas) { @@ -345,83 +352,107 @@ static void uwb_drp_handle_conflict_rsv(struct uwb_rc *rc, struct uwb_rsv *rsv, /* check if the conflicting reservation has two drp_ies */ if (uwb_rsv_has_two_drp_ies(rsv)) { mv = &rsv->mv; - if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS)) { - handle_conflict_expanding(drp_ie, drp_evt->beacon_slot_number, - rsv, false, conflicting_mas); + if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm, + UWB_NUM_MAS)) { + handle_conflict_expanding(drp_ie, + drp_evt->beacon_slot_number, + rsv, false, conflicting_mas); } else { - if (bitmap_intersects(mv->companion_mas.bm, conflicting_mas->bm, UWB_NUM_MAS)) { - handle_conflict_expanding(drp_ie, drp_evt->beacon_slot_number, - rsv, true, conflicting_mas); + if (bitmap_intersects(mv->companion_mas.bm, + conflicting_mas->bm, UWB_NUM_MAS)) { + handle_conflict_expanding( + drp_ie, drp_evt->beacon_slot_number, + rsv, true, conflicting_mas); } } - } else if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS)) { - handle_conflict_normal(drp_ie, drp_evt->beacon_slot_number, rsv, conflicting_mas); + } else if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm, + UWB_NUM_MAS)) { + handle_conflict_normal(drp_ie, drp_evt->beacon_slot_number, + rsv, conflicting_mas); } } static void uwb_drp_handle_all_conflict_rsv(struct uwb_rc *rc, - struct uwb_rc_evt_drp *drp_evt, + struct uwb_rc_evt_drp *drp_evt, struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *conflicting_mas) { struct uwb_rsv *rsv; - + list_for_each_entry(rsv, &rc->reservations, rc_node) { - uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, conflicting_mas); + uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, + conflicting_mas); } } - + +static void uwb_drp_process_target_accepted(struct uwb_rc *rc, + struct uwb_rsv *rsv, struct uwb_rc_evt_drp *drp_evt, + struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *mas) +{ + struct uwb_rsv_move *mv = &rsv->mv; + int status; + + status = uwb_ie_drp_status(drp_ie); + + if (rsv->state == UWB_RSV_STATE_T_CONFLICT) { + uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); + return; + } + + if (rsv->state == UWB_RSV_STATE_T_EXPANDING_ACCEPTED) { + /* drp_ie is companion */ + if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) { + /* stroke companion */ + uwb_rsv_set_state(rsv, + UWB_RSV_STATE_T_EXPANDING_ACCEPTED); + } + } else { + if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) { + if (uwb_drp_avail_reserve_pending(rc, mas) == -EBUSY) { + /* FIXME: there is a conflict, find + * the conflicting reservations and + * take a sensible action. Consider + * that in drp_ie there is the + * "neighbour" */ + uwb_drp_handle_all_conflict_rsv(rc, drp_evt, + drp_ie, mas); + } else { + /* accept the extra reservation */ + bitmap_copy(mv->companion_mas.bm, mas->bm, + UWB_NUM_MAS); + uwb_rsv_set_state(rsv, + UWB_RSV_STATE_T_EXPANDING_ACCEPTED); + } + } else { + if (status) { + uwb_rsv_set_state(rsv, + UWB_RSV_STATE_T_ACCEPTED); + } + } + + } +} + /* * Based on the DRP IE, transition a target reservation to a new * state. */ static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv, - struct uwb_ie_drp *drp_ie, struct uwb_rc_evt_drp *drp_evt) + struct uwb_ie_drp *drp_ie, struct uwb_rc_evt_drp *drp_evt) { struct device *dev = &rc->uwb_dev.dev; struct uwb_rsv_move *mv = &rsv->mv; int status; enum uwb_drp_reason reason_code; struct uwb_mas_bm mas; - + status = uwb_ie_drp_status(drp_ie); reason_code = uwb_ie_drp_reason_code(drp_ie); uwb_drp_ie_to_bm(&mas, drp_ie); switch (reason_code) { case UWB_DRP_REASON_ACCEPTED: - - if (rsv->state == UWB_RSV_STATE_T_CONFLICT) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); - break; - } - - if (rsv->state == UWB_RSV_STATE_T_EXPANDING_ACCEPTED) { - /* drp_ie is companion */ - if (!bitmap_equal(rsv->mas.bm, mas.bm, UWB_NUM_MAS)) - /* stroke companion */ - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_EXPANDING_ACCEPTED); - } else { - if (!bitmap_equal(rsv->mas.bm, mas.bm, UWB_NUM_MAS)) { - if (uwb_drp_avail_reserve_pending(rc, &mas) == -EBUSY) { - /* FIXME: there is a conflict, find - * the conflicting reservations and - * take a sensible action. Consider - * that in drp_ie there is the - * "neighbour" */ - uwb_drp_handle_all_conflict_rsv(rc, drp_evt, drp_ie, &mas); - } else { - /* accept the extra reservation */ - bitmap_copy(mv->companion_mas.bm, mas.bm, UWB_NUM_MAS); - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_EXPANDING_ACCEPTED); - } - } else { - if (status) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED); - } - } - - } + uwb_drp_process_target_accepted(rc, rsv, drp_evt, drp_ie, &mas); break; case UWB_DRP_REASON_MODIFIED: @@ -434,7 +465,8 @@ static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv, /* find if the owner wants to expand or reduce */ if (bitmap_subset(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) { /* owner is reducing */ - bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mas.bm, UWB_NUM_MAS); + bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mas.bm, + UWB_NUM_MAS); uwb_drp_avail_release(rsv->rc, &mv->companion_mas); } @@ -447,6 +479,48 @@ static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv, } } +static void uwb_drp_process_owner_accepted(struct uwb_rsv *rsv, + struct uwb_mas_bm *mas) +{ + struct uwb_rsv_move *mv = &rsv->mv; + + switch (rsv->state) { + case UWB_RSV_STATE_O_PENDING: + case UWB_RSV_STATE_O_INITIATED: + case UWB_RSV_STATE_O_ESTABLISHED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + break; + case UWB_RSV_STATE_O_MODIFIED: + if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS)) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + else + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED); + break; + + case UWB_RSV_STATE_O_MOVE_REDUCING: /* shouldn' t be a problem */ + if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS)) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + else + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); + break; + case UWB_RSV_STATE_O_MOVE_EXPANDING: + if (bitmap_equal(mas->bm, mv->companion_mas.bm, UWB_NUM_MAS)) { + /* Companion reservation accepted */ + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); + } else { + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING); + } + break; + case UWB_RSV_STATE_O_MOVE_COMBINING: + if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS)) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); + else + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); + break; + default: + break; + } +} /* * Based on the DRP IE, transition an owner reservation to a new * state. @@ -456,7 +530,6 @@ static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv, struct uwb_rc_evt_drp *drp_evt) { struct device *dev = &rc->uwb_dev.dev; - struct uwb_rsv_move *mv = &rsv->mv; int status; enum uwb_drp_reason reason_code; struct uwb_mas_bm mas; @@ -468,44 +541,7 @@ static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv, if (status) { switch (reason_code) { case UWB_DRP_REASON_ACCEPTED: - switch (rsv->state) { - case UWB_RSV_STATE_O_PENDING: - case UWB_RSV_STATE_O_INITIATED: - case UWB_RSV_STATE_O_ESTABLISHED: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - break; - case UWB_RSV_STATE_O_MODIFIED: - if (bitmap_equal(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - } else { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED); - } - break; - - case UWB_RSV_STATE_O_MOVE_REDUCING: /* shouldn' t be a problem */ - if (bitmap_equal(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - } else { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); - } - break; - case UWB_RSV_STATE_O_MOVE_EXPANDING: - if (bitmap_equal(mas.bm, mv->companion_mas.bm, UWB_NUM_MAS)) { - /* Companion reservation accepted */ - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); - } else { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING); - } - break; - case UWB_RSV_STATE_O_MOVE_COMBINING: - if (bitmap_equal(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); - else - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); - break; - default: - break; - } + uwb_drp_process_owner_accepted(rsv, &mas); break; default: dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", @@ -545,9 +581,9 @@ static void uwb_cnflt_update_work(struct work_struct *work) cnflt_update_work); struct uwb_cnflt_alien *c; struct uwb_rc *rc = cnflt->rc; - + unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE; - + mutex_lock(&rc->rsvs_mutex); list_del(&cnflt->rc_node); @@ -556,10 +592,12 @@ static void uwb_cnflt_update_work(struct work_struct *work) bitmap_zero(rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS); list_for_each_entry(c, &rc->cnflt_alien_list, rc_node) { - bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, c->mas.bm, UWB_NUM_MAS); + bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, + c->mas.bm, UWB_NUM_MAS); } - - queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, usecs_to_jiffies(delay_us)); + + queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, + usecs_to_jiffies(delay_us)); kfree(cnflt); mutex_unlock(&rc->rsvs_mutex); @@ -583,10 +621,10 @@ static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_i struct uwb_cnflt_alien *cnflt; char buf[72]; unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE; - + uwb_drp_ie_to_bm(&mas, drp_ie); bitmap_scnprintf(buf, sizeof(buf), mas.bm, UWB_NUM_MAS); - + list_for_each_entry(cnflt, &rc->cnflt_alien_list, rc_node) { if (bitmap_equal(cnflt->mas.bm, mas.bm, UWB_NUM_MAS)) { /* Existing alien BP reservation conflicting @@ -612,7 +650,7 @@ static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_i cnflt->rc = rc; INIT_WORK(&cnflt->cnflt_update_work, uwb_cnflt_update_work); - + bitmap_copy(cnflt->mas.bm, mas.bm, UWB_NUM_MAS); list_add_tail(&cnflt->rc_node, &rc->cnflt_alien_list); @@ -621,17 +659,17 @@ static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_i bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, mas.bm, UWB_NUM_MAS); queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, usecs_to_jiffies(delay_us)); - + /* start the timer */ uwb_cnflt_alien_stroke_timer(cnflt); } static void uwb_drp_process_not_involved(struct uwb_rc *rc, - struct uwb_rc_evt_drp *drp_evt, + struct uwb_rc_evt_drp *drp_evt, struct uwb_ie_drp *drp_ie) { struct uwb_mas_bm mas; - + uwb_drp_ie_to_bm(&mas, drp_ie); uwb_drp_handle_all_conflict_rsv(rc, drp_evt, drp_ie, &mas); } @@ -651,7 +689,7 @@ static void uwb_drp_process_involved(struct uwb_rc *rc, struct uwb_dev *src, */ return; } - + /* * Do nothing with DRP IEs for reservations that have been * terminated. @@ -660,12 +698,12 @@ static void uwb_drp_process_involved(struct uwb_rc *rc, struct uwb_dev *src, uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); return; } - + if (uwb_ie_drp_owner(drp_ie)) uwb_drp_process_target(rc, rsv, drp_ie, drp_evt); else uwb_drp_process_owner(rc, rsv, src, drp_ie, drp_evt); - + } From 992801645bd9458d9317a552e194bf27f4d53151 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Mon, 28 Apr 2014 14:53:26 -0500 Subject: [PATCH 240/314] uwb: comment typo fix Comment typo fix. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/radio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/uwb/radio.c b/drivers/uwb/radio.c index fd23d985ea71..2427e944883d 100644 --- a/drivers/uwb/radio.c +++ b/drivers/uwb/radio.c @@ -115,7 +115,7 @@ int uwb_radio_start(struct uwb_pal *pal) EXPORT_SYMBOL_GPL(uwb_radio_start); /** - * uwb_radio_stop - request tha the radio be stopped. + * uwb_radio_stop - request that the radio be stopped. * @pal: the PAL making the request. * * Stops the radio if no other PAL is making use of it. From c6a64de08e52235b570fedbe927cc5f3127ca47e Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Mon, 28 Apr 2014 14:53:27 -0500 Subject: [PATCH 241/314] uwb: fix variable set but not used warnings Fix variable set but not used warnings in UWB. Signed-off-by: Thomas Pugliese Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/beacon.c | 3 --- drivers/uwb/est.c | 2 -- drivers/uwb/ie-rcv.c | 2 -- 3 files changed, 7 deletions(-) diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c index b476187adf55..f40745fcbd34 100644 --- a/drivers/uwb/beacon.c +++ b/drivers/uwb/beacon.c @@ -397,7 +397,6 @@ int uwbd_evt_handle_rc_beacon(struct uwb_event *evt) struct uwb_rc_evt_beacon *be; struct uwb_beacon_frame *bf; struct uwb_beca_e *bce; - unsigned long last_ts; rc = evt->rc; be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb); @@ -441,8 +440,6 @@ int uwbd_evt_handle_rc_beacon(struct uwb_event *evt) /* purge old beacon data */ kfree(bce->be); - last_ts = bce->ts_jiffies; - /* Update commonly used fields */ bce->ts_jiffies = evt->ts_jiffies; bce->be = be; diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c index 457f31d99bf4..f3e232584284 100644 --- a/drivers/uwb/est.c +++ b/drivers/uwb/est.c @@ -258,7 +258,6 @@ int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product, { unsigned long flags; unsigned itr; - u16 type_event_high; int result = 0; write_lock_irqsave(&uwb_est_lock, flags); @@ -268,7 +267,6 @@ int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product, goto out; } /* Find the right spot to insert it in */ - type_event_high = type << 8 | event_high; for (itr = 0; itr < uwb_est_used; itr++) if (uwb_est[itr].type_event_high < type && uwb_est[itr].vendor < vendor diff --git a/drivers/uwb/ie-rcv.c b/drivers/uwb/ie-rcv.c index 917e6d78a798..5fac5744a699 100644 --- a/drivers/uwb/ie-rcv.c +++ b/drivers/uwb/ie-rcv.c @@ -31,7 +31,6 @@ int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *evt) int result = -EINVAL; struct device *dev = &evt->rc->uwb_dev.dev; struct uwb_rc_evt_ie_rcv *iercv; - size_t iesize; /* Is there enough data to decode it? */ if (evt->notif.size < sizeof(*iercv)) { @@ -41,7 +40,6 @@ int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *evt) goto error; } iercv = container_of(evt->notif.rceb, struct uwb_rc_evt_ie_rcv, rceb); - iesize = le16_to_cpu(iercv->wIELength); dev_dbg(dev, "IE received, element ID=%d\n", iercv->IEData[0]); From 2d53139f31626bad6f8983d8e519ddde2cbba921 Mon Sep 17 00:00:00 2001 From: David Mosberger Date: Mon, 28 Apr 2014 22:14:07 -0600 Subject: [PATCH 242/314] Add support for using a MAX3421E chip as a host driver. Signed-off-by: David Mosberger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 + drivers/usb/host/Kconfig | 11 + drivers/usb/host/Makefile | 1 + drivers/usb/host/max3421-hcd.c | 1937 +++++++++++++++++++++ include/linux/platform_data/max3421-hcd.h | 23 + 5 files changed, 1973 insertions(+) create mode 100644 drivers/usb/host/max3421-hcd.c create mode 100644 include/linux/platform_data/max3421-hcd.h diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 1ae2bf39d84b..9bb672199703 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_USB_IMX21_HCD) += host/ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += host/ obj-$(CONFIG_USB_FUSBH200_HCD) += host/ obj-$(CONFIG_USB_FOTG210_HCD) += host/ +obj-$(CONFIG_USB_MAX3421_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 7a39ae86d5ce..52144c720a1d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -342,6 +342,17 @@ config USB_FOTG210_HCD To compile this driver as a module, choose M here: the module will be called fotg210-hcd. +config USB_MAX3421_HCD + tristate "MAX3421 HCD (USB-over-SPI) support" + depends on USB && SPI + ---help--- + The Maxim MAX3421E chip supports standard USB 2.0-compliant + full-speed devices either in host or peripheral mode. This + driver supports the host-mode of the MAX3421E only. + + To compile this driver as a module, choose M here: the module will + be called max3421-hcd. + config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 7530468c9a4f..ea2bec52a4fb 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -70,3 +70,4 @@ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o +obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c new file mode 100644 index 000000000000..dfc74d6738db --- /dev/null +++ b/drivers/usb/host/max3421-hcd.c @@ -0,0 +1,1937 @@ +/* + * MAX3421 Host Controller driver for USB. + * + * Author: David Mosberger-Tang + * + * (C) Copyright 2014 David Mosberger-Tang + * + * MAX3421 is a chip implementing a USB 2.0 Full-/Low-Speed host + * controller on a SPI bus. + * + * Based on: + * o MAX3421E datasheet + * http://datasheets.maximintegrated.com/en/ds/MAX3421E.pdf + * o MAX3421E Programming Guide + * http://www.hdl.co.jp/ftpdata/utl-001/AN3785.pdf + * o gadget/dummy_hcd.c + * For USB HCD implementation. + * o Arduino MAX3421 driver + * https://github.com/felis/USB_Host_Shield_2.0/blob/master/Usb.cpp + * + * This file is licenced under the GPL v2. + * + * Important note on worst-case (full-speed) packet size constraints + * (See USB 2.0 Section 5.6.3 and following): + * + * - control: 64 bytes + * - isochronous: 1023 bytes + * - interrupt: 64 bytes + * - bulk: 64 bytes + * + * Since the MAX3421 FIFO size is 64 bytes, we do not have to work about + * multi-FIFO writes/reads for a single USB packet *except* for isochronous + * transfers. We don't support isochronous transfers at this time, so we + * just assume that a USB packet always fits into a single FIFO buffer. + * + * NOTE: The June 2006 version of "MAX3421E Programming Guide" + * (AN3785) has conflicting info for the RCVDAVIRQ bit: + * + * The description of RCVDAVIRQ says "The CPU *must* clear + * this IRQ bit (by writing a 1 to it) before reading the + * RCVFIFO data. + * + * However, the earlier section on "Programming BULK-IN + * Transfers" says * that: + * + * After the CPU retrieves the data, it clears the + * RCVDAVIRQ bit. + * + * The December 2006 version has been corrected and it consistently + * states the second behavior is the correct one. + * + * Synchronous SPI transactions sleep so we can't perform any such + * transactions while holding a spin-lock (and/or while interrupts are + * masked). To achieve this, all SPI transactions are issued from a + * single thread (max3421_spi_thread). + */ + +#include +#include +#include +#include + +#include + +#define DRIVER_DESC "MAX3421 USB Host-Controller Driver" +#define DRIVER_VERSION "1.0" + +/* 11-bit counter that wraps around (USB 2.0 Section 8.3.3): */ +#define USB_MAX_FRAME_NUMBER 0x7ff +#define USB_MAX_RETRIES 3 /* # of retries before error is reported */ + +/* + * Max. # of times we're willing to retransmit a request immediately in + * resposne to a NAK. Afterwards, we fall back on trying once a frame. + */ +#define NAK_MAX_FAST_RETRANSMITS 2 + +#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ + +/* Port-change mask: */ +#define PORT_C_MASK ((USB_PORT_STAT_C_CONNECTION | \ + USB_PORT_STAT_C_ENABLE | \ + USB_PORT_STAT_C_SUSPEND | \ + USB_PORT_STAT_C_OVERCURRENT | \ + USB_PORT_STAT_C_RESET) << 16) + +enum max3421_rh_state { + MAX3421_RH_RESET, + MAX3421_RH_SUSPENDED, + MAX3421_RH_RUNNING +}; + +enum pkt_state { + PKT_STATE_SETUP, /* waiting to send setup packet to ctrl pipe */ + PKT_STATE_TRANSFER, /* waiting to xfer transfer_buffer */ + PKT_STATE_TERMINATE /* waiting to terminate control transfer */ +}; + +enum scheduling_pass { + SCHED_PASS_PERIODIC, + SCHED_PASS_NON_PERIODIC, + SCHED_PASS_DONE +}; + +struct max3421_hcd { + spinlock_t lock; + + struct task_struct *spi_thread; + + struct max3421_hcd *next; + + enum max3421_rh_state rh_state; + /* lower 16 bits contain port status, upper 16 bits the change mask: */ + u32 port_status; + + unsigned active:1; + + struct list_head ep_list; /* list of EP's with work */ + + /* + * The following are owned by spi_thread (may be accessed by + * SPI-thread without acquiring the HCD lock: + */ + u8 rev; /* chip revision */ + u16 frame_number; + /* + * URB we're currently processing. Must not be reset to NULL + * unless MAX3421E chip is idle: + */ + struct urb *curr_urb; + enum scheduling_pass sched_pass; + struct usb_device *loaded_dev; /* dev that's loaded into the chip */ + int loaded_epnum; /* epnum whose toggles are loaded */ + int urb_done; /* > 0 -> no errors, < 0: errno */ + size_t curr_len; + u8 hien; + u8 mode; + u8 iopins[2]; + unsigned int do_enable_irq:1; + unsigned int do_reset_hcd:1; + unsigned int do_reset_port:1; + unsigned int do_check_unlink:1; + unsigned int do_iopin_update:1; +#ifdef DEBUG + unsigned long err_stat[16]; +#endif +}; + +struct max3421_ep { + struct usb_host_endpoint *ep; + struct list_head ep_list; + u32 naks; + u16 last_active; /* frame # this ep was last active */ + enum pkt_state pkt_state; + u8 retries; + u8 retransmit; /* packet needs retransmission */ +}; + +static struct max3421_hcd *max3421_hcd_list; + +#define MAX3421_FIFO_SIZE 64 + +#define MAX3421_SPI_DIR_RD 0 /* read register from MAX3421 */ +#define MAX3421_SPI_DIR_WR 1 /* write register to MAX3421 */ + +/* SPI commands: */ +#define MAX3421_SPI_DIR_SHIFT 1 +#define MAX3421_SPI_REG_SHIFT 3 + +#define MAX3421_REG_RCVFIFO 1 +#define MAX3421_REG_SNDFIFO 2 +#define MAX3421_REG_SUDFIFO 4 +#define MAX3421_REG_RCVBC 6 +#define MAX3421_REG_SNDBC 7 +#define MAX3421_REG_USBIRQ 13 +#define MAX3421_REG_USBIEN 14 +#define MAX3421_REG_USBCTL 15 +#define MAX3421_REG_CPUCTL 16 +#define MAX3421_REG_PINCTL 17 +#define MAX3421_REG_REVISION 18 +#define MAX3421_REG_IOPINS1 20 +#define MAX3421_REG_IOPINS2 21 +#define MAX3421_REG_GPINIRQ 22 +#define MAX3421_REG_GPINIEN 23 +#define MAX3421_REG_GPINPOL 24 +#define MAX3421_REG_HIRQ 25 +#define MAX3421_REG_HIEN 26 +#define MAX3421_REG_MODE 27 +#define MAX3421_REG_PERADDR 28 +#define MAX3421_REG_HCTL 29 +#define MAX3421_REG_HXFR 30 +#define MAX3421_REG_HRSL 31 + +enum { + MAX3421_USBIRQ_OSCOKIRQ_BIT = 0, + MAX3421_USBIRQ_NOVBUSIRQ_BIT = 5, + MAX3421_USBIRQ_VBUSIRQ_BIT +}; + +enum { + MAX3421_CPUCTL_IE_BIT = 0, + MAX3421_CPUCTL_PULSEWID0_BIT = 6, + MAX3421_CPUCTL_PULSEWID1_BIT +}; + +enum { + MAX3421_USBCTL_PWRDOWN_BIT = 4, + MAX3421_USBCTL_CHIPRES_BIT +}; + +enum { + MAX3421_PINCTL_GPXA_BIT = 0, + MAX3421_PINCTL_GPXB_BIT, + MAX3421_PINCTL_POSINT_BIT, + MAX3421_PINCTL_INTLEVEL_BIT, + MAX3421_PINCTL_FDUPSPI_BIT, + MAX3421_PINCTL_EP0INAK_BIT, + MAX3421_PINCTL_EP2INAK_BIT, + MAX3421_PINCTL_EP3INAK_BIT, +}; + +enum { + MAX3421_HI_BUSEVENT_BIT = 0, /* bus-reset/-resume */ + MAX3421_HI_RWU_BIT, /* remote wakeup */ + MAX3421_HI_RCVDAV_BIT, /* receive FIFO data available */ + MAX3421_HI_SNDBAV_BIT, /* send buffer available */ + MAX3421_HI_SUSDN_BIT, /* suspend operation done */ + MAX3421_HI_CONDET_BIT, /* peripheral connect/disconnect */ + MAX3421_HI_FRAME_BIT, /* frame generator */ + MAX3421_HI_HXFRDN_BIT, /* host transfer done */ +}; + +enum { + MAX3421_HCTL_BUSRST_BIT = 0, + MAX3421_HCTL_FRMRST_BIT, + MAX3421_HCTL_SAMPLEBUS_BIT, + MAX3421_HCTL_SIGRSM_BIT, + MAX3421_HCTL_RCVTOG0_BIT, + MAX3421_HCTL_RCVTOG1_BIT, + MAX3421_HCTL_SNDTOG0_BIT, + MAX3421_HCTL_SNDTOG1_BIT +}; + +enum { + MAX3421_MODE_HOST_BIT = 0, + MAX3421_MODE_LOWSPEED_BIT, + MAX3421_MODE_HUBPRE_BIT, + MAX3421_MODE_SOFKAENAB_BIT, + MAX3421_MODE_SEPIRQ_BIT, + MAX3421_MODE_DELAYISO_BIT, + MAX3421_MODE_DMPULLDN_BIT, + MAX3421_MODE_DPPULLDN_BIT +}; + +enum { + MAX3421_HRSL_OK = 0, + MAX3421_HRSL_BUSY, + MAX3421_HRSL_BADREQ, + MAX3421_HRSL_UNDEF, + MAX3421_HRSL_NAK, + MAX3421_HRSL_STALL, + MAX3421_HRSL_TOGERR, + MAX3421_HRSL_WRONGPID, + MAX3421_HRSL_BADBC, + MAX3421_HRSL_PIDERR, + MAX3421_HRSL_PKTERR, + MAX3421_HRSL_CRCERR, + MAX3421_HRSL_KERR, + MAX3421_HRSL_JERR, + MAX3421_HRSL_TIMEOUT, + MAX3421_HRSL_BABBLE, + MAX3421_HRSL_RESULT_MASK = 0xf, + MAX3421_HRSL_RCVTOGRD_BIT = 4, + MAX3421_HRSL_SNDTOGRD_BIT, + MAX3421_HRSL_KSTATUS_BIT, + MAX3421_HRSL_JSTATUS_BIT +}; + +/* Return same error-codes as ohci.h:cc_to_error: */ +static const int hrsl_to_error[] = { + [MAX3421_HRSL_OK] = 0, + [MAX3421_HRSL_BUSY] = -EINVAL, + [MAX3421_HRSL_BADREQ] = -EINVAL, + [MAX3421_HRSL_UNDEF] = -EINVAL, + [MAX3421_HRSL_NAK] = -EAGAIN, + [MAX3421_HRSL_STALL] = -EPIPE, + [MAX3421_HRSL_TOGERR] = -EILSEQ, + [MAX3421_HRSL_WRONGPID] = -EPROTO, + [MAX3421_HRSL_BADBC] = -EREMOTEIO, + [MAX3421_HRSL_PIDERR] = -EPROTO, + [MAX3421_HRSL_PKTERR] = -EPROTO, + [MAX3421_HRSL_CRCERR] = -EILSEQ, + [MAX3421_HRSL_KERR] = -EIO, + [MAX3421_HRSL_JERR] = -EIO, + [MAX3421_HRSL_TIMEOUT] = -ETIME, + [MAX3421_HRSL_BABBLE] = -EOVERFLOW +}; + +/* + * See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a + * reasonable overview of how control transfers use the the IN/OUT + * tokens. + */ +#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */ +#define MAX3421_HXFR_SETUP 0x10 +#define MAX3421_HXFR_BULK_OUT(ep) (0x20 | (ep)) /* bulk or interrupt */ +#define MAX3421_HXFR_ISO_IN(ep) (0x40 | (ep)) +#define MAX3421_HXFR_ISO_OUT(ep) (0x60 | (ep)) +#define MAX3421_HXFR_HS_IN 0x80 /* handshake in */ +#define MAX3421_HXFR_HS_OUT 0xa0 /* handshake out */ + +#define field(val, bit) ((val) << (bit)) + +static inline s16 +frame_diff(u16 left, u16 right) +{ + return ((unsigned) (left - right)) % (USB_MAX_FRAME_NUMBER + 1); +} + +static inline struct max3421_hcd * +hcd_to_max3421(struct usb_hcd *hcd) +{ + return (struct max3421_hcd *) hcd->hcd_priv; +} + +static inline struct usb_hcd * +max3421_to_hcd(struct max3421_hcd *max3421_hcd) +{ + return container_of((void *) max3421_hcd, struct usb_hcd, hcd_priv); +} + +static u8 +spi_rd8(struct usb_hcd *hcd, unsigned int reg) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct spi_transfer transfer; + u8 tx_data[1]; + /* + * RX data must be in its own cache-line so it stays flushed + * from the cache until the transfer is complete. Otherwise, + * we get stale data from the cache. + */ + u8 rx_data[SMP_CACHE_BYTES] ____cacheline_aligned; + struct spi_message msg; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + tx_data[0] = (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); + + transfer.tx_buf = tx_data; + transfer.rx_buf = rx_data; + transfer.len = 2; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); + + return rx_data[1]; +} + +static void +spi_wr8(struct usb_hcd *hcd, unsigned int reg, u8 val) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct spi_transfer transfer; + struct spi_message msg; + u8 tx_data[2]; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + tx_data[0] = (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); + tx_data[1] = val; + + transfer.tx_buf = tx_data; + transfer.len = 2; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); +} + +static void +spi_rd_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct spi_transfer transfer[2]; + struct spi_message msg; + u8 cmd; + + memset(transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + cmd = (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); + + transfer[0].tx_buf = &cmd; + transfer[0].len = 1; + + transfer[1].rx_buf = buf; + transfer[1].len = len; + + spi_message_add_tail(&transfer[0], &msg); + spi_message_add_tail(&transfer[1], &msg); + spi_sync(spi, &msg); +} + +static void +spi_wr_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct spi_transfer transfer[2]; + struct spi_message msg; + u8 cmd; + + memset(transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + cmd = (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); + + transfer[0].tx_buf = &cmd; + transfer[0].len = 1; + + transfer[1].tx_buf = buf; + transfer[1].len = len; + + spi_message_add_tail(&transfer[0], &msg); + spi_message_add_tail(&transfer[1], &msg); + spi_sync(spi, &msg); +} + +/* + * Figure out the correct setting for the LOWSPEED and HUBPRE mode + * bits. The HUBPRE bit needs to be set when MAX3421E operates at + * full speed, but it's talking to a low-speed device (i.e., through a + * hub). Setting that bit ensures that every low-speed packet is + * preceded by a full-speed PRE PID. Possible configurations: + * + * Hub speed: Device speed: => LOWSPEED bit: HUBPRE bit: + * FULL FULL => 0 0 + * FULL LOW => 1 1 + * LOW LOW => 1 0 + * LOW FULL => 1 0 + */ +static void +max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u8 mode_lowspeed, mode_hubpre, mode = max3421_hcd->mode; + + mode_lowspeed = BIT(MAX3421_MODE_LOWSPEED_BIT); + mode_hubpre = BIT(MAX3421_MODE_HUBPRE_BIT); + if (max3421_hcd->port_status & USB_PORT_STAT_LOW_SPEED) { + mode |= mode_lowspeed; + mode &= ~mode_hubpre; + } else if (dev->speed == USB_SPEED_LOW) { + mode |= mode_lowspeed | mode_hubpre; + } else { + mode &= ~(mode_lowspeed | mode_hubpre); + } + if (mode != max3421_hcd->mode) { + max3421_hcd->mode = mode; + spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode); + } + +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, + int force_toggles) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int old_epnum, same_ep, rcvtog, sndtog; + struct usb_device *old_dev; + u8 hctl; + + old_dev = max3421_hcd->loaded_dev; + old_epnum = max3421_hcd->loaded_epnum; + + same_ep = (dev == old_dev && epnum == old_epnum); + if (same_ep && !force_toggles) + return; + + if (old_dev && !same_ep) { + /* save the old end-points toggles: */ + u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + + rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; + sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + + /* no locking: HCD (i.e., we) own toggles, don't we? */ + usb_settoggle(old_dev, old_epnum, 0, rcvtog); + usb_settoggle(old_dev, old_epnum, 1, sndtog); + } + /* setup new endpoint's toggle bits: */ + rcvtog = usb_gettoggle(dev, epnum, 0); + sndtog = usb_gettoggle(dev, epnum, 1); + hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) | + BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); + + max3421_hcd->loaded_epnum = epnum; + spi_wr8(hcd, MAX3421_REG_HCTL, hctl); + + /* + * Note: devnum for one and the same device can change during + * address-assignment so it's best to just always load the + * address whenever the end-point changed/was forced. + */ + max3421_hcd->loaded_dev = dev; + spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum); +} + +static int +max3421_ctrl_setup(struct usb_hcd *hcd, struct urb *urb) +{ + spi_wr_buf(hcd, MAX3421_REG_SUDFIFO, urb->setup_packet, 8); + return MAX3421_HXFR_SETUP; +} + +static int +max3421_transfer_in(struct usb_hcd *hcd, struct urb *urb) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int epnum = usb_pipeendpoint(urb->pipe); + + max3421_hcd->curr_len = 0; + max3421_hcd->hien |= BIT(MAX3421_HI_RCVDAV_BIT); + return MAX3421_HXFR_BULK_IN(epnum); +} + +static int +max3421_transfer_out(struct usb_hcd *hcd, struct urb *urb, int fast_retransmit) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int epnum = usb_pipeendpoint(urb->pipe); + u32 max_packet; + void *src; + + src = urb->transfer_buffer + urb->actual_length; + + if (fast_retransmit) { + if (max3421_hcd->rev == 0x12) { + /* work around rev 0x12 bug: */ + spi_wr8(hcd, MAX3421_REG_SNDBC, 0); + spi_wr8(hcd, MAX3421_REG_SNDFIFO, ((u8 *) src)[0]); + spi_wr8(hcd, MAX3421_REG_SNDBC, max3421_hcd->curr_len); + } + return MAX3421_HXFR_BULK_OUT(epnum); + } + + max_packet = usb_maxpacket(urb->dev, urb->pipe, 1); + + if (max_packet > MAX3421_FIFO_SIZE) { + /* + * We do not support isochronous transfers at this + * time. + */ + dev_err(&spi->dev, + "%s: packet-size of %u too big (limit is %u bytes)", + __func__, max_packet, MAX3421_FIFO_SIZE); + max3421_hcd->urb_done = -EMSGSIZE; + return -EMSGSIZE; + } + max3421_hcd->curr_len = min((urb->transfer_buffer_length - + urb->actual_length), max_packet); + + spi_wr_buf(hcd, MAX3421_REG_SNDFIFO, src, max3421_hcd->curr_len); + spi_wr8(hcd, MAX3421_REG_SNDBC, max3421_hcd->curr_len); + return MAX3421_HXFR_BULK_OUT(epnum); +} + +/* + * Issue the next host-transfer command. + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_next_transfer(struct usb_hcd *hcd, int fast_retransmit) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep = urb->ep->hcpriv; + int cmd = -EINVAL; + + if (!urb) + return; /* nothing to do */ + + switch (max3421_ep->pkt_state) { + case PKT_STATE_SETUP: + cmd = max3421_ctrl_setup(hcd, urb); + break; + + case PKT_STATE_TRANSFER: + if (usb_urb_dir_in(urb)) + cmd = max3421_transfer_in(hcd, urb); + else + cmd = max3421_transfer_out(hcd, urb, fast_retransmit); + break; + + case PKT_STATE_TERMINATE: + /* + * IN transfers are terminated with HS_OUT token, + * OUT transfers with HS_IN: + */ + if (usb_urb_dir_in(urb)) + cmd = MAX3421_HXFR_HS_OUT; + else + cmd = MAX3421_HXFR_HS_IN; + break; + } + + if (cmd < 0) + return; + + /* issue the command and wait for host-xfer-done interrupt: */ + + spi_wr8(hcd, MAX3421_REG_HXFR, cmd); + max3421_hcd->hien |= BIT(MAX3421_HI_HXFRDN_BIT); +} + +/* + * Find the next URB to process and start its execution. + * + * At this time, we do not anticipate ever connecting a USB hub to the + * MAX3421 chip, so at most USB device can be connected and we can use + * a simplistic scheduler: at the start of a frame, schedule all + * periodic transfers. Once that is done, use the remainder of the + * frame to process non-periodic (bulk & control) transfers. + * + * Preconditions: + * o Caller must NOT hold HCD spinlock. + * o max3421_hcd->curr_urb MUST BE NULL. + * o MAX3421E chip must be idle. + */ +static int +max3421_select_and_start_urb(struct usb_hcd *hcd) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb, *curr_urb = NULL; + struct max3421_ep *max3421_ep; + int epnum, force_toggles = 0; + struct usb_host_endpoint *ep; + struct list_head *pos; + unsigned long flags; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + for (; + max3421_hcd->sched_pass < SCHED_PASS_DONE; + ++max3421_hcd->sched_pass) + list_for_each(pos, &max3421_hcd->ep_list) { + urb = NULL; + max3421_ep = container_of(pos, struct max3421_ep, + ep_list); + ep = max3421_ep->ep; + + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: + if (max3421_hcd->sched_pass != + SCHED_PASS_PERIODIC) + continue; + break; + + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + if (max3421_hcd->sched_pass != + SCHED_PASS_NON_PERIODIC) + continue; + break; + } + + if (list_empty(&ep->urb_list)) + continue; /* nothing to do */ + urb = list_first_entry(&ep->urb_list, struct urb, + urb_list); + if (urb->unlinked) { + dev_dbg(&spi->dev, "%s: URB %p unlinked=%d", + __func__, urb, urb->unlinked); + max3421_hcd->curr_urb = urb; + max3421_hcd->urb_done = 1; + spin_unlock_irqrestore(&max3421_hcd->lock, + flags); + return 1; + } + + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + /* + * Allow one control transaction per + * frame per endpoint: + */ + if (frame_diff(max3421_ep->last_active, + max3421_hcd->frame_number) == 0) + continue; + break; + + case USB_ENDPOINT_XFER_BULK: + if (max3421_ep->retransmit + && (frame_diff(max3421_ep->last_active, + max3421_hcd->frame_number) + == 0)) + /* + * We already tried this EP + * during this frame and got a + * NAK or error; wait for next frame + */ + continue; + break; + + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: + if (frame_diff(max3421_hcd->frame_number, + max3421_ep->last_active) + < urb->interval) + /* + * We already processed this + * end-point in the current + * frame + */ + continue; + break; + } + + /* move current ep to tail: */ + list_move_tail(pos, &max3421_hcd->ep_list); + curr_urb = urb; + goto done; + } +done: + if (!curr_urb) { + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return 0; + } + + urb = max3421_hcd->curr_urb = curr_urb; + epnum = usb_endpoint_num(&urb->ep->desc); + if (max3421_ep->retransmit) + /* restart (part of) a USB transaction: */ + max3421_ep->retransmit = 0; + else { + /* start USB transaction: */ + if (usb_endpoint_xfer_control(&ep->desc)) { + /* + * See USB 2.0 spec section 8.6.1 + * Initialization via SETUP Token: + */ + usb_settoggle(urb->dev, epnum, 0, 1); + usb_settoggle(urb->dev, epnum, 1, 1); + max3421_ep->pkt_state = PKT_STATE_SETUP; + force_toggles = 1; + } else + max3421_ep->pkt_state = PKT_STATE_TRANSFER; + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + + max3421_ep->last_active = max3421_hcd->frame_number; + max3421_set_address(hcd, urb->dev, epnum, force_toggles); + max3421_set_speed(hcd, urb->dev); + max3421_next_transfer(hcd, 0); + return 1; +} + +/* + * Check all endpoints for URBs that got unlinked. + * + * Caller must NOT hold HCD spinlock. + */ +static int +max3421_check_unlink(struct usb_hcd *hcd) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct list_head *pos, *upos, *next_upos; + struct max3421_ep *max3421_ep; + struct usb_host_endpoint *ep; + struct urb *urb; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + list_for_each(pos, &max3421_hcd->ep_list) { + max3421_ep = container_of(pos, struct max3421_ep, ep_list); + ep = max3421_ep->ep; + list_for_each_safe(upos, next_upos, &ep->urb_list) { + urb = container_of(upos, struct urb, urb_list); + if (urb->unlinked) { + retval = 1; + dev_dbg(&spi->dev, "%s: URB %p unlinked=%d", + __func__, urb, urb->unlinked); + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&max3421_hcd->lock, + flags); + usb_hcd_giveback_urb(hcd, urb, 0); + spin_lock_irqsave(&max3421_hcd->lock, flags); + } + } + } + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_slow_retransmit(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep; + + max3421_ep = urb->ep->hcpriv; + max3421_ep->retransmit = 1; + max3421_hcd->curr_urb = NULL; +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_recv_data_available(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + size_t remaining, transfer_size; + u8 rcvbc; + + rcvbc = spi_rd8(hcd, MAX3421_REG_RCVBC); + + if (rcvbc > MAX3421_FIFO_SIZE) + rcvbc = MAX3421_FIFO_SIZE; + if (urb->actual_length >= urb->transfer_buffer_length) + remaining = 0; + else + remaining = urb->transfer_buffer_length - urb->actual_length; + transfer_size = rcvbc; + if (transfer_size > remaining) + transfer_size = remaining; + if (transfer_size > 0) { + void *dst = urb->transfer_buffer + urb->actual_length; + + spi_rd_buf(hcd, MAX3421_REG_RCVFIFO, dst, transfer_size); + urb->actual_length += transfer_size; + max3421_hcd->curr_len = transfer_size; + } + + /* ack the RCVDAV irq now that the FIFO has been read: */ + spi_wr8(hcd, MAX3421_REG_HIRQ, BIT(MAX3421_HI_RCVDAV_BIT)); +} + +static void +max3421_handle_error(struct usb_hcd *hcd, u8 hrsl) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u8 result_code = hrsl & MAX3421_HRSL_RESULT_MASK; + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep = urb->ep->hcpriv; + int switch_sndfifo; + + /* + * If an OUT command results in any response other than OK + * (i.e., error or NAK), we have to perform a dummy-write to + * SNDBC so the FIFO gets switched back to us. Otherwise, we + * get out of sync with the SNDFIFO double buffer. + */ + switch_sndfifo = (max3421_ep->pkt_state == PKT_STATE_TRANSFER && + usb_urb_dir_out(urb)); + + switch (result_code) { + case MAX3421_HRSL_OK: + return; /* this shouldn't happen */ + + case MAX3421_HRSL_WRONGPID: /* received wrong PID */ + case MAX3421_HRSL_BUSY: /* SIE busy */ + case MAX3421_HRSL_BADREQ: /* bad val in HXFR */ + case MAX3421_HRSL_UNDEF: /* reserved */ + case MAX3421_HRSL_KERR: /* K-state instead of response */ + case MAX3421_HRSL_JERR: /* J-state instead of response */ + /* + * packet experienced an error that we cannot recover + * from; report error + */ + max3421_hcd->urb_done = hrsl_to_error[result_code]; + dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x", + __func__, hrsl); + break; + + case MAX3421_HRSL_TOGERR: + if (usb_urb_dir_in(urb)) + ; /* don't do anything (device will switch toggle) */ + else { + /* flip the send toggle bit: */ + int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + + sndtog ^= 1; + spi_wr8(hcd, MAX3421_REG_HCTL, + BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); + } + /* FALL THROUGH */ + case MAX3421_HRSL_BADBC: /* bad byte count */ + case MAX3421_HRSL_PIDERR: /* received PID is corrupted */ + case MAX3421_HRSL_PKTERR: /* packet error (stuff, EOP) */ + case MAX3421_HRSL_CRCERR: /* CRC error */ + case MAX3421_HRSL_BABBLE: /* device talked too long */ + case MAX3421_HRSL_TIMEOUT: + if (max3421_ep->retries++ < USB_MAX_RETRIES) + /* retry the packet again in the next frame */ + max3421_slow_retransmit(hcd); + else { + /* Based on ohci.h cc_to_err[]: */ + max3421_hcd->urb_done = hrsl_to_error[result_code]; + dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x", + __func__, hrsl); + } + break; + + case MAX3421_HRSL_STALL: + dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x", + __func__, hrsl); + max3421_hcd->urb_done = hrsl_to_error[result_code]; + break; + + case MAX3421_HRSL_NAK: + /* + * Device wasn't ready for data or has no data + * available: retry the packet again. + */ + if (max3421_ep->naks++ < NAK_MAX_FAST_RETRANSMITS) { + max3421_next_transfer(hcd, 1); + switch_sndfifo = 0; + } else + max3421_slow_retransmit(hcd); + break; + } + if (switch_sndfifo) + spi_wr8(hcd, MAX3421_REG_SNDBC, 0); +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static int +max3421_transfer_in_done(struct usb_hcd *hcd, struct urb *urb) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u32 max_packet; + + if (urb->actual_length >= urb->transfer_buffer_length) + return 1; /* read is complete, so we're done */ + + /* + * USB 2.0 Section 5.3.2 Pipes: packets must be full size + * except for last one. + */ + max_packet = usb_maxpacket(urb->dev, urb->pipe, 0); + if (max_packet > MAX3421_FIFO_SIZE) { + /* + * We do not support isochronous transfers at this + * time... + */ + dev_err(&spi->dev, + "%s: packet-size of %u too big (limit is %u bytes)", + __func__, max_packet, MAX3421_FIFO_SIZE); + return -EINVAL; + } + + if (max3421_hcd->curr_len < max_packet) { + if (urb->transfer_flags & URB_SHORT_NOT_OK) { + /* + * remaining > 0 and received an + * unexpected partial packet -> + * error + */ + return -EREMOTEIO; + } else + /* short read, but it's OK */ + return 1; + } + return 0; /* not done */ +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static int +max3421_transfer_out_done(struct usb_hcd *hcd, struct urb *urb) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + urb->actual_length += max3421_hcd->curr_len; + if (urb->actual_length < urb->transfer_buffer_length) + return 0; + if (urb->transfer_flags & URB_ZERO_PACKET) { + /* + * Some hardware needs a zero-size packet at the end + * of a bulk-out transfer if the last transfer was a + * full-sized packet (i.e., such hardware use < + * max_packet as an indicator that the end of the + * packet has been reached). + */ + u32 max_packet = usb_maxpacket(urb->dev, urb->pipe, 1); + + if (max3421_hcd->curr_len == max_packet) + return 0; + } + return 1; +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_host_transfer_done(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep; + u8 result_code, hrsl; + int urb_done = 0; + + max3421_hcd->hien &= ~(BIT(MAX3421_HI_HXFRDN_BIT) | + BIT(MAX3421_HI_RCVDAV_BIT)); + + hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + result_code = hrsl & MAX3421_HRSL_RESULT_MASK; + +#ifdef DEBUG + ++max3421_hcd->err_stat[result_code]; +#endif + + max3421_ep = urb->ep->hcpriv; + + if (unlikely(result_code != MAX3421_HRSL_OK)) { + max3421_handle_error(hcd, hrsl); + return; + } + + max3421_ep->naks = 0; + max3421_ep->retries = 0; + switch (max3421_ep->pkt_state) { + + case PKT_STATE_SETUP: + if (urb->transfer_buffer_length > 0) + max3421_ep->pkt_state = PKT_STATE_TRANSFER; + else + max3421_ep->pkt_state = PKT_STATE_TERMINATE; + break; + + case PKT_STATE_TRANSFER: + if (usb_urb_dir_in(urb)) + urb_done = max3421_transfer_in_done(hcd, urb); + else + urb_done = max3421_transfer_out_done(hcd, urb); + if (urb_done > 0 && usb_pipetype(urb->pipe) == PIPE_CONTROL) { + /* + * We aren't really done - we still need to + * terminate the control transfer: + */ + max3421_hcd->urb_done = urb_done = 0; + max3421_ep->pkt_state = PKT_STATE_TERMINATE; + } + break; + + case PKT_STATE_TERMINATE: + urb_done = 1; + break; + } + + if (urb_done) + max3421_hcd->urb_done = urb_done; + else + max3421_next_transfer(hcd, 0); +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_detect_conn(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned int jk, have_conn = 0; + u32 old_port_status, chg; + unsigned long flags; + u8 hrsl, mode; + + hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + + jk = ((((hrsl >> MAX3421_HRSL_JSTATUS_BIT) & 1) << 0) | + (((hrsl >> MAX3421_HRSL_KSTATUS_BIT) & 1) << 1)); + + mode = max3421_hcd->mode; + + switch (jk) { + case 0x0: /* SE0: disconnect */ + /* + * Turn off SOFKAENAB bit to avoid getting interrupt + * every milli-second: + */ + mode &= ~BIT(MAX3421_MODE_SOFKAENAB_BIT); + break; + + case 0x1: /* J=0,K=1: low-speed (in full-speed or vice versa) */ + case 0x2: /* J=1,K=0: full-speed (in full-speed or vice versa) */ + if (jk == 0x2) + /* need to switch to the other speed: */ + mode ^= BIT(MAX3421_MODE_LOWSPEED_BIT); + /* turn on SOFKAENAB bit: */ + mode |= BIT(MAX3421_MODE_SOFKAENAB_BIT); + have_conn = 1; + break; + + case 0x3: /* illegal */ + break; + } + + max3421_hcd->mode = mode; + spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode); + + spin_lock_irqsave(&max3421_hcd->lock, flags); + old_port_status = max3421_hcd->port_status; + if (have_conn) + max3421_hcd->port_status |= USB_PORT_STAT_CONNECTION; + else + max3421_hcd->port_status &= ~USB_PORT_STAT_CONNECTION; + if (mode & BIT(MAX3421_MODE_LOWSPEED_BIT)) + max3421_hcd->port_status |= USB_PORT_STAT_LOW_SPEED; + else + max3421_hcd->port_status &= ~USB_PORT_STAT_LOW_SPEED; + chg = (old_port_status ^ max3421_hcd->port_status); + max3421_hcd->port_status |= chg << 16; + spin_unlock_irqrestore(&max3421_hcd->lock, flags); +} + +static irqreturn_t +max3421_irq_handler(int irq, void *dev_id) +{ + struct usb_hcd *hcd = dev_id; + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + if (max3421_hcd->spi_thread && + max3421_hcd->spi_thread->state != TASK_RUNNING) + wake_up_process(max3421_hcd->spi_thread); + if (!max3421_hcd->do_enable_irq) { + max3421_hcd->do_enable_irq = 1; + disable_irq_nosync(spi->irq); + } + return IRQ_HANDLED; +} + +#ifdef DEBUG + +static void +dump_eps(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct max3421_ep *max3421_ep; + struct usb_host_endpoint *ep; + struct list_head *pos, *upos; + char ubuf[512], *dp, *end; + unsigned long flags; + struct urb *urb; + int epnum, ret; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + list_for_each(pos, &max3421_hcd->ep_list) { + max3421_ep = container_of(pos, struct max3421_ep, ep_list); + ep = max3421_ep->ep; + + dp = ubuf; + end = dp + sizeof(ubuf); + *dp = '\0'; + list_for_each(upos, &ep->urb_list) { + urb = container_of(upos, struct urb, urb_list); + ret = snprintf(dp, end - dp, " %p(%d.%s %d/%d)", urb, + usb_pipetype(urb->pipe), + usb_urb_dir_in(urb) ? "IN" : "OUT", + urb->actual_length, + urb->transfer_buffer_length); + if (ret < 0 || ret >= end - dp) + break; /* error or buffer full */ + dp += ret; + } + + epnum = usb_endpoint_num(&ep->desc); + pr_info("EP%0u %u lst %04u rtr %u nak %6u rxmt %u: %s\n", + epnum, max3421_ep->pkt_state, max3421_ep->last_active, + max3421_ep->retries, max3421_ep->naks, + max3421_ep->retransmit, ubuf); + } + spin_unlock_irqrestore(&max3421_hcd->lock, flags); +} + +#endif /* DEBUG */ + +/* Return zero if no work was performed, 1 otherwise. */ +static int +max3421_handle_irqs(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u32 chg, old_port_status; + unsigned long flags; + u8 hirq; + + /* + * Read and ack pending interrupts (CPU must never + * clear SNDBAV directly and RCVDAV must be cleared by + * max3421_recv_data_available()!): + */ + hirq = spi_rd8(hcd, MAX3421_REG_HIRQ); + hirq &= max3421_hcd->hien; + if (!hirq) + return 0; + + spi_wr8(hcd, MAX3421_REG_HIRQ, + hirq & ~(BIT(MAX3421_HI_SNDBAV_BIT) | + BIT(MAX3421_HI_RCVDAV_BIT))); + + if (hirq & BIT(MAX3421_HI_FRAME_BIT)) { + max3421_hcd->frame_number = ((max3421_hcd->frame_number + 1) + & USB_MAX_FRAME_NUMBER); + max3421_hcd->sched_pass = SCHED_PASS_PERIODIC; + } + + if (hirq & BIT(MAX3421_HI_RCVDAV_BIT)) + max3421_recv_data_available(hcd); + + if (hirq & BIT(MAX3421_HI_HXFRDN_BIT)) + max3421_host_transfer_done(hcd); + + if (hirq & BIT(MAX3421_HI_CONDET_BIT)) + max3421_detect_conn(hcd); + + /* + * Now process interrupts that may affect HCD state + * other than the end-points: + */ + spin_lock_irqsave(&max3421_hcd->lock, flags); + + old_port_status = max3421_hcd->port_status; + if (hirq & BIT(MAX3421_HI_BUSEVENT_BIT)) { + if (max3421_hcd->port_status & USB_PORT_STAT_RESET) { + /* BUSEVENT due to completion of Bus Reset */ + max3421_hcd->port_status &= ~USB_PORT_STAT_RESET; + max3421_hcd->port_status |= USB_PORT_STAT_ENABLE; + } else { + /* BUSEVENT due to completion of Bus Resume */ + pr_info("%s: BUSEVENT Bus Resume Done\n", __func__); + } + } + if (hirq & BIT(MAX3421_HI_RWU_BIT)) + pr_info("%s: RWU\n", __func__); + if (hirq & BIT(MAX3421_HI_SUSDN_BIT)) + pr_info("%s: SUSDN\n", __func__); + + chg = (old_port_status ^ max3421_hcd->port_status); + max3421_hcd->port_status |= chg << 16; + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + +#ifdef DEBUG + { + static unsigned long last_time; + char sbuf[16 * 16], *dp, *end; + int i; + + if (jiffies - last_time > 5*HZ) { + dp = sbuf; + end = sbuf + sizeof(sbuf); + *dp = '\0'; + for (i = 0; i < 16; ++i) { + int ret = snprintf(dp, end - dp, " %lu", + max3421_hcd->err_stat[i]); + if (ret < 0 || ret >= end - dp) + break; /* error or buffer full */ + dp += ret; + } + pr_info("%s: hrsl_stats %s\n", __func__, sbuf); + memset(max3421_hcd->err_stat, 0, + sizeof(max3421_hcd->err_stat)); + last_time = jiffies; + + dump_eps(hcd); + } + } +#endif + return 1; +} + +static int +max3421_reset_hcd(struct usb_hcd *hcd) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int timeout; + + /* perform a chip reset and wait for OSCIRQ signal to appear: */ + spi_wr8(hcd, MAX3421_REG_USBCTL, BIT(MAX3421_USBCTL_CHIPRES_BIT)); + /* clear reset: */ + spi_wr8(hcd, MAX3421_REG_USBCTL, 0); + timeout = 1000; + while (1) { + if (spi_rd8(hcd, MAX3421_REG_USBIRQ) + & BIT(MAX3421_USBIRQ_OSCOKIRQ_BIT)) + break; + if (--timeout < 0) { + dev_err(&spi->dev, + "timed out waiting for oscillator OK signal"); + return 1; + } + cond_resched(); + } + + /* + * Turn on host mode, automatic generation of SOF packets, and + * enable pull-down registers on DM/DP: + */ + max3421_hcd->mode = (BIT(MAX3421_MODE_HOST_BIT) | + BIT(MAX3421_MODE_SOFKAENAB_BIT) | + BIT(MAX3421_MODE_DMPULLDN_BIT) | + BIT(MAX3421_MODE_DPPULLDN_BIT)); + spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode); + + /* reset frame-number: */ + max3421_hcd->frame_number = USB_MAX_FRAME_NUMBER; + spi_wr8(hcd, MAX3421_REG_HCTL, BIT(MAX3421_HCTL_FRMRST_BIT)); + + /* sample the state of the D+ and D- lines */ + spi_wr8(hcd, MAX3421_REG_HCTL, BIT(MAX3421_HCTL_SAMPLEBUS_BIT)); + max3421_detect_conn(hcd); + + /* enable frame, connection-detected, and bus-event interrupts: */ + max3421_hcd->hien = (BIT(MAX3421_HI_FRAME_BIT) | + BIT(MAX3421_HI_CONDET_BIT) | + BIT(MAX3421_HI_BUSEVENT_BIT)); + spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien); + + /* enable interrupts: */ + spi_wr8(hcd, MAX3421_REG_CPUCTL, BIT(MAX3421_CPUCTL_IE_BIT)); + return 1; +} + +static int +max3421_urb_done(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + struct urb *urb; + int status; + + status = max3421_hcd->urb_done; + max3421_hcd->urb_done = 0; + if (status > 0) + status = 0; + urb = max3421_hcd->curr_urb; + if (urb) { + max3421_hcd->curr_urb = NULL; + spin_lock_irqsave(&max3421_hcd->lock, flags); + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + + /* must be called without the HCD spinlock: */ + usb_hcd_giveback_urb(hcd, urb, status); + } + return 1; +} + +static int +max3421_spi_thread(void *dev_id) +{ + struct usb_hcd *hcd = dev_id; + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int i, i_worked = 1; + + /* set full-duplex SPI mode, low-active interrupt pin: */ + spi_wr8(hcd, MAX3421_REG_PINCTL, + (BIT(MAX3421_PINCTL_FDUPSPI_BIT) | /* full-duplex */ + BIT(MAX3421_PINCTL_INTLEVEL_BIT))); /* low-active irq */ + + while (!kthread_should_stop()) { + max3421_hcd->rev = spi_rd8(hcd, MAX3421_REG_REVISION); + if (max3421_hcd->rev == 0x12 || max3421_hcd->rev == 0x13) + break; + dev_err(&spi->dev, "bad rev 0x%02x", max3421_hcd->rev); + msleep(10000); + } + dev_info(&spi->dev, "rev 0x%x, SPI clk %dHz, bpw %u, irq %d\n", + max3421_hcd->rev, spi->max_speed_hz, spi->bits_per_word, + spi->irq); + + while (!kthread_should_stop()) { + if (!i_worked) { + /* + * We'll be waiting for wakeups from the hard + * interrupt handler, so now is a good time to + * sync our hien with the chip: + */ + spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien); + + set_current_state(TASK_INTERRUPTIBLE); + if (max3421_hcd->do_enable_irq) { + max3421_hcd->do_enable_irq = 0; + enable_irq(spi->irq); + } + schedule(); + __set_current_state(TASK_RUNNING); + } + + i_worked = 0; + + if (max3421_hcd->urb_done) + i_worked |= max3421_urb_done(hcd); + else if (max3421_handle_irqs(hcd)) + i_worked = 1; + else if (!max3421_hcd->curr_urb) + i_worked |= max3421_select_and_start_urb(hcd); + + if (max3421_hcd->do_reset_hcd) { + /* reset the HCD: */ + max3421_hcd->do_reset_hcd = 0; + i_worked |= max3421_reset_hcd(hcd); + } + if (max3421_hcd->do_reset_port) { + /* perform a USB bus reset: */ + max3421_hcd->do_reset_port = 0; + spi_wr8(hcd, MAX3421_REG_HCTL, + BIT(MAX3421_HCTL_BUSRST_BIT)); + i_worked = 1; + } + if (max3421_hcd->do_check_unlink) { + max3421_hcd->do_check_unlink = 0; + i_worked |= max3421_check_unlink(hcd); + } + if (max3421_hcd->do_iopin_update) { + /* + * IOPINS1/IOPINS2 do not auto-increment, so we can't + * use spi_wr_buf(). + */ + for (i = 0; i < ARRAY_SIZE(max3421_hcd->iopins); ++i) { + u8 val = spi_rd8(hcd, MAX3421_REG_IOPINS1); + + val = ((val & 0xf0) | + (max3421_hcd->iopins[i] & 0x0f)); + spi_wr8(hcd, MAX3421_REG_IOPINS1 + i, val); + max3421_hcd->iopins[i] = val; + } + max3421_hcd->do_iopin_update = 0; + i_worked = 1; + } + } + set_current_state(TASK_RUNNING); + dev_info(&spi->dev, "SPI thread exiting"); + return 0; +} + +static int +max3421_reset_port(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + max3421_hcd->port_status &= ~(USB_PORT_STAT_ENABLE | + USB_PORT_STAT_LOW_SPEED); + max3421_hcd->do_reset_port = 1; + wake_up_process(max3421_hcd->spi_thread); + return 0; +} + +static int +max3421_reset(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + hcd->self.sg_tablesize = 0; + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_FULL; + max3421_hcd->do_reset_hcd = 1; + wake_up_process(max3421_hcd->spi_thread); + return 0; +} + +static int +max3421_start(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + spin_lock_init(&max3421_hcd->lock); + max3421_hcd->rh_state = MAX3421_RH_RUNNING; + + INIT_LIST_HEAD(&max3421_hcd->ep_list); + + hcd->power_budget = POWER_BUDGET; + hcd->state = HC_STATE_RUNNING; + hcd->uses_new_polling = 1; + return 0; +} + +static void +max3421_stop(struct usb_hcd *hcd) +{ +} + +static int +max3421_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct max3421_ep *max3421_ep; + unsigned long flags; + int retval; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + case PIPE_ISOCHRONOUS: + if (urb->interval < 0) { + dev_err(&spi->dev, + "%s: interval=%d for intr-/iso-pipe; expected > 0\n", + __func__, urb->interval); + return -EINVAL; + } + default: + break; + } + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + max3421_ep = urb->ep->hcpriv; + if (!max3421_ep) { + /* gets freed in max3421_endpoint_disable: */ + max3421_ep = kzalloc(sizeof(struct max3421_ep), mem_flags); + if (!max3421_ep) + return -ENOMEM; + max3421_ep->ep = urb->ep; + max3421_ep->last_active = max3421_hcd->frame_number; + urb->ep->hcpriv = max3421_ep; + + list_add_tail(&max3421_ep->ep_list, &max3421_hcd->ep_list); + } + + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval == 0) { + /* Since we added to the queue, restart scheduling: */ + max3421_hcd->sched_pass = SCHED_PASS_PERIODIC; + wake_up_process(max3421_hcd->spi_thread); + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static int +max3421_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + int retval; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + /* + * This will set urb->unlinked which in turn causes the entry + * to be dropped at the next opportunity. + */ + retval = usb_hcd_check_unlink_urb(hcd, urb, status); + if (retval == 0) { + max3421_hcd->do_check_unlink = 1; + wake_up_process(max3421_hcd->spi_thread); + } + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static void +max3421_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + if (ep->hcpriv) { + struct max3421_ep *max3421_ep = ep->hcpriv; + + /* remove myself from the ep_list: */ + if (!list_empty(&max3421_ep->ep_list)) + list_del(&max3421_ep->ep_list); + kfree(max3421_ep); + ep->hcpriv = NULL; + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); +} + +static int +max3421_get_frame_number(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + return max3421_hcd->frame_number; +} + +/* + * Should return a non-zero value when any port is undergoing a resume + * transition while the root hub is suspended. + */ +static int +max3421_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) + goto done; + + *buf = 0; + if ((max3421_hcd->port_status & PORT_C_MASK) != 0) { + *buf = (1 << 1); /* a hub over-current condition exists */ + dev_dbg(hcd->self.controller, + "port status 0x%08x has changes\n", + max3421_hcd->port_status); + retval = 1; + if (max3421_hcd->rh_state == MAX3421_RH_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + } +done: + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static inline void +hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof(*desc)); + /* + * See Table 11-13: Hub Descriptor in USB 2.0 spec. + */ + desc->bDescriptorType = 0x29; /* hub descriptor */ + desc->bDescLength = 9; + desc->wHubCharacteristics = cpu_to_le16(0x0001); + desc->bNbrPorts = 1; +} + +/* + * Set the MAX3421E general-purpose output with number PIN_NUMBER to + * VALUE (0 or 1). PIN_NUMBER may be in the range from 1-8. For + * any other value, this function acts as a no-op. + */ +static void +max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u8 mask, idx; + + --pin_number; + if (pin_number > 7) + return; + + mask = 1u << pin_number; + idx = pin_number / 4; + + if (value) + max3421_hcd->iopins[idx] |= mask; + else + max3421_hcd->iopins[idx] &= ~mask; + max3421_hcd->do_iopin_update = 1; + wake_up_process(max3421_hcd->spi_thread); +} + +static int +max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index, + char *buf, u16 length) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct max3421_hcd_platform_data *pdata; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + pdata = spi->dev.platform_data; + + switch (type_req) { + case ClearHubFeature: + break; + case ClearPortFeature: + switch (value) { + case USB_PORT_FEAT_SUSPEND: + break; + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, "power-off\n"); + max3421_gpout_set_value(hcd, pdata->vbus_gpout, 0); + /* FALLS THROUGH */ + default: + max3421_hcd->port_status &= ~(1 << value); + } + break; + case GetHubDescriptor: + hub_descriptor((struct usb_hub_descriptor *) buf); + break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + case GetPortErrorCount: + case SetHubDepth: + /* USB3 only */ + goto error; + + case GetHubStatus: + *(__le32 *) buf = cpu_to_le32(0); + break; + + case GetPortStatus: + if (index != 1) { + retval = -EPIPE; + goto error; + } + ((__le16 *) buf)[0] = cpu_to_le16(max3421_hcd->port_status); + ((__le16 *) buf)[1] = + cpu_to_le16(max3421_hcd->port_status >> 16); + break; + + case SetHubFeature: + retval = -EPIPE; + break; + + case SetPortFeature: + switch (value) { + case USB_PORT_FEAT_LINK_STATE: + case USB_PORT_FEAT_U1_TIMEOUT: + case USB_PORT_FEAT_U2_TIMEOUT: + case USB_PORT_FEAT_BH_PORT_RESET: + goto error; + case USB_PORT_FEAT_SUSPEND: + if (max3421_hcd->active) + max3421_hcd->port_status |= + USB_PORT_STAT_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, "power-on\n"); + max3421_hcd->port_status |= USB_PORT_STAT_POWER; + max3421_gpout_set_value(hcd, pdata->vbus_gpout, 1); + break; + case USB_PORT_FEAT_RESET: + max3421_reset_port(hcd); + /* FALLS THROUGH */ + default: + if ((max3421_hcd->port_status & USB_PORT_STAT_POWER) + != 0) + max3421_hcd->port_status |= (1 << value); + } + break; + + default: + dev_dbg(hcd->self.controller, + "hub control req%04x v%04x i%04x l%d\n", + type_req, value, index, length); +error: /* "protocol stall" on error */ + retval = -EPIPE; + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static int +max3421_bus_suspend(struct usb_hcd *hcd) +{ + return -1; +} + +static int +max3421_bus_resume(struct usb_hcd *hcd) +{ + return -1; +} + +/* + * The SPI driver already takes care of DMA-mapping/unmapping, so no + * reason to do it twice. + */ +static int +max3421_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) +{ + return 0; +} + +static void +max3421_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ +} + +static struct hc_driver max3421_hcd_desc = { + .description = "max3421", + .product_desc = DRIVER_DESC, + .hcd_priv_size = sizeof(struct max3421_hcd), + .flags = HCD_USB11, + .reset = max3421_reset, + .start = max3421_start, + .stop = max3421_stop, + .get_frame_number = max3421_get_frame_number, + .urb_enqueue = max3421_urb_enqueue, + .urb_dequeue = max3421_urb_dequeue, + .map_urb_for_dma = max3421_map_urb_for_dma, + .unmap_urb_for_dma = max3421_unmap_urb_for_dma, + .endpoint_disable = max3421_endpoint_disable, + .hub_status_data = max3421_hub_status_data, + .hub_control = max3421_hub_control, + .bus_suspend = max3421_bus_suspend, + .bus_resume = max3421_bus_resume, +}; + +static int +max3421_probe(struct spi_device *spi) +{ + struct max3421_hcd *max3421_hcd; + struct usb_hcd *hcd; + int retval; + + if (spi_setup(spi) < 0) { + dev_err(&spi->dev, "Unable to setup SPI bus"); + return -EFAULT; + } + + hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev, + dev_name(&spi->dev)); + if (!hcd) { + dev_err(&spi->dev, "failed to create HCD structure\n"); + return -ENOMEM; + } + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + max3421_hcd = hcd_to_max3421(hcd); + max3421_hcd->next = max3421_hcd_list; + max3421_hcd_list = max3421_hcd; + INIT_LIST_HEAD(&max3421_hcd->ep_list); + + max3421_hcd->spi_thread = kthread_run(max3421_spi_thread, hcd, + "max3421_spi_thread"); + if (max3421_hcd->spi_thread == ERR_PTR(-ENOMEM)) { + dev_err(&spi->dev, + "failed to create SPI thread (out of memory)\n"); + return -ENOMEM; + } + + retval = usb_add_hcd(hcd, 0, 0); + if (retval) { + dev_err(&spi->dev, "failed to add HCD\n"); + usb_put_hcd(hcd); + return retval; + } + + retval = request_irq(spi->irq, max3421_irq_handler, + IRQF_TRIGGER_LOW, "max3421", hcd); + if (retval < 0) { + usb_put_hcd(hcd); + dev_err(&spi->dev, "failed to request irq %d\n", spi->irq); + return retval; + } + return 0; +} + +static int +max3421_remove(struct spi_device *spi) +{ + struct max3421_hcd *max3421_hcd = NULL, **prev; + struct usb_hcd *hcd = NULL; + unsigned long flags; + + for (prev = &max3421_hcd_list; *prev; prev = &(*prev)->next) { + max3421_hcd = *prev; + hcd = max3421_to_hcd(max3421_hcd); + if (hcd->self.controller == &spi->dev) + break; + } + if (!max3421_hcd) { + dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n", + spi); + return -ENODEV; + } + + usb_remove_hcd(hcd); + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + kthread_stop(max3421_hcd->spi_thread); + *prev = max3421_hcd->next; + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + + free_irq(spi->irq, hcd); + + usb_put_hcd(hcd); + return 0; +} + +static struct spi_driver max3421_driver = { + .probe = max3421_probe, + .remove = max3421_remove, + .driver = { + .name = "max3421-hcd", + .owner = THIS_MODULE, + }, +}; + +static int __init +max3421_mod_init(void) +{ + return spi_register_driver(&max3421_driver); +} + +static void __exit +max3421_mod_exit(void) +{ + spi_unregister_driver(&max3421_driver); +} + +module_init(max3421_mod_init); +module_exit(max3421_mod_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Mosberger "); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/max3421-hcd.h b/include/linux/platform_data/max3421-hcd.h new file mode 100644 index 000000000000..4ad459605d87 --- /dev/null +++ b/include/linux/platform_data/max3421-hcd.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2014 eGauge Systems LLC + * Contributed by David Mosberger-Tang + * + * Platform-data structure for MAX3421 USB HCD driver. + * + */ +#ifndef MAX3421_HCD_PLAT_H_INCLUDED +#define MAX3421_HCD_PLAT_H_INCLUDED + +/* + * This structure defines the mapping of certain auxiliary functions to the + * MAX3421E GPIO pins. The chip has eight GP inputs and eight GP outputs. + * A value of 0 indicates that the pin is not used/wired to anything. + * + * At this point, the only control the max3421-hcd driver cares about is + * to control Vbus (5V to the peripheral). + */ +struct max3421_hcd_platform_data { + u8 vbus_gpout; /* pin controlling Vbus */ +}; + +#endif /* MAX3421_HCD_PLAT_H_INCLUDED */ From 0cc4cf6f3049fe174b6698016e046a233a2a6045 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 29 Apr 2014 00:49:42 -0300 Subject: [PATCH 243/314] usb: dwc2: Remove '0x' notation when using %pad format %pad notation automatically prints in hexadecimal format (with '0x'), so remove the unneeded '0x' to avoid a '0x0x' string. Signed-off-by: Fabio Estevam Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2057c380969e..f3c56a2fed5b 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -551,7 +551,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, ureq->length, ureq->actual); if (0) dev_dbg(hsotg->dev, - "REQ buf %p len %d dma 0x%pad noi=%d zp=%d snok=%d\n", + "REQ buf %p len %d dma %pad noi=%d zp=%d snok=%d\n", ureq->buf, length, &ureq->dma, ureq->no_interrupt, ureq->zero, ureq->short_not_ok); @@ -620,7 +620,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); - dev_dbg(hsotg->dev, "%s: 0x%pad => 0x%08x\n", + dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n", __func__, &ureq->dma, dma_reg); } From f4cbd33fd5f0587910fa9db403a1b42f1cabf820 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 29 Apr 2014 08:35:58 +0800 Subject: [PATCH 244/314] usb: move usb/usb-common.c to usb/common/usb-common.c Since we will have more usb-common things, and it will let usb-common.c be larger and larger, we create a folder named usb/common for all usb common things. Cc: Felipe Balbi Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 2 +- drivers/usb/common/Makefile | 5 +++++ drivers/usb/{ => common}/usb-common.c | 0 3 files changed, 6 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/common/Makefile rename drivers/usb/{ => common}/usb-common.c (100%) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 9bb672199703..3cba892b83a2 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -59,4 +59,4 @@ obj-$(CONFIG_USB_CHIPIDEA) += chipidea/ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/ obj-$(CONFIG_USB_GADGET) += gadget/ -obj-$(CONFIG_USB_COMMON) += usb-common.o +obj-$(CONFIG_USB_COMMON) += common/ diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile new file mode 100644 index 000000000000..9b320d1a11fd --- /dev/null +++ b/drivers/usb/common/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the usb common parts. +# + +obj-$(CONFIG_USB_COMMON) += usb-common.o diff --git a/drivers/usb/usb-common.c b/drivers/usb/common/usb-common.c similarity index 100% rename from drivers/usb/usb-common.c rename to drivers/usb/common/usb-common.c From 1dfa91aa5ba9650acf59b6310d8e78a162d56410 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 29 Apr 2014 08:35:59 +0800 Subject: [PATCH 245/314] usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c Since usb otg fsm implementation is not related to usb phy. We move it from usb/phy/ to usb/common/, and rename it to reflect its real meaning. Cc: Felipe Balbi Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/common/Makefile | 1 + drivers/usb/{phy/phy-fsm-usb.c => common/usb-otg-fsm.c} | 0 drivers/usb/core/Kconfig | 9 +++++++++ drivers/usb/phy/Kconfig | 9 --------- drivers/usb/phy/Makefile | 1 - 5 files changed, 10 insertions(+), 10 deletions(-) rename drivers/usb/{phy/phy-fsm-usb.c => common/usb-otg-fsm.c} (100%) diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index 9b320d1a11fd..752646167e1e 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_USB_COMMON) += usb-common.o +obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/common/usb-otg-fsm.c similarity index 100% rename from drivers/usb/phy/phy-fsm-usb.c rename to drivers/usb/common/usb-otg-fsm.c diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 9519878587f6..1060657ca1b0 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -81,3 +81,12 @@ config USB_OTG_BLACKLIST_HUB and software costs by not supporting external hubs. So are "Embedded Hosts" that don't offer OTG support. +config USB_OTG_FSM + tristate "USB 2.0 OTG FSM implementation" + depends on USB + select USB_OTG + select USB_PHY + help + Implements OTG Finite State Machine as specified in On-The-Go + and Embedded Host Supplement to the USB Revision 2.0 Specification. + diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 4c35d6176735..c9950becb7e0 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -6,15 +6,6 @@ menu "USB Physical Layer drivers" config USB_PHY def_bool n -config USB_OTG_FSM - tristate "USB 2.0 OTG FSM implementation" - depends on USB - select USB_OTG - select USB_PHY - help - Implements OTG Final State Machine as specified in On-The-Go - and Embedded Host Supplement to the USB Revision 2.0 Specification. - # # USB Transceiver Drivers # diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index a2d05690d925..24a91332d4ad 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -3,7 +3,6 @@ # obj-$(CONFIG_USB_PHY) += phy.o obj-$(CONFIG_OF) += of.o -obj-$(CONFIG_USB_OTG_FSM) += phy-fsm-usb.o # transceiver drivers, keep the list sorted From 88bf6b3f2542bbe20168e84b1196792c2fab08c9 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 15 May 2014 12:17:26 +0200 Subject: [PATCH 246/314] usb: ehci-orion: use platform_get_irq() for DT probing Commit 77dae54ab385033e488d8b07045bc7f8d931740f ('ARM: Kirkwood: ehci-orion: Add device tree binding') added the Device Tree binding for the ehci-orion driver. To achieve that with the irq, it used the irq_of_parse_and_map() function when probed in DT-mode, and platform_get_irq() when probed in non-DT mode. This is not necessary: platform_get_irq() works just as fine in DT-mode, since the conversion from DT information to 'struct resource' is done by the generic layers of the kernel. Therefore, this commit switches back to use just platform_get_irq(). Signed-off-by: Thomas Petazzoni Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-orion.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 30d35e5e503a..7728e83007a7 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -154,10 +154,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) pr_debug("Initializing Orion-SoC USB Host Controller\n"); - if (pdev->dev.of_node) - irq = irq_of_parse_and_map(pdev->dev.of_node, 0); - else - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", From d8ea69e28d72f85caa5dcce0db5b62ae468f2c5a Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 15 May 2014 12:17:27 +0200 Subject: [PATCH 247/314] usb: ehci-orion: rename error goto labels in ehci_orion_drv_probe() In preparation to the introduction of additional initialization steps in ehci_orion_drv_probe(), we rename the error goto labels from err1, err2 and err3 names to some more meaningful names. Signed-off-by: Thomas Petazzoni Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-orion.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 7728e83007a7..9298be7c0f9b 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -160,7 +160,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) "Found HC with no IRQ. Check %s setup!\n", dev_name(&pdev->dev)); err = -ENODEV; - goto err1; + goto err; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -169,7 +169,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) "Found HC with no register addr. Check %s setup!\n", dev_name(&pdev->dev)); err = -ENODEV; - goto err1; + goto err; } /* @@ -179,12 +179,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) */ err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) - goto err1; + goto err; regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(regs)) { err = PTR_ERR(regs); - goto err1; + goto err; } /* Not all platforms can gate the clock, so it is not @@ -197,7 +197,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { err = -ENOMEM; - goto err2; + goto err_create_hcd; } hcd->rsrc_start = res->start; @@ -237,17 +237,17 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err3; + goto err_add_hcd; device_wakeup_enable(hcd->self.controller); return 0; -err3: +err_add_hcd: usb_put_hcd(hcd); -err2: +err_create_hcd: if (!IS_ERR(clk)) clk_disable_unprepare(clk); -err1: +err: dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), err); From ac0696629d73d87e51c2fb75426cebad4399bac4 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 15 May 2014 12:17:28 +0200 Subject: [PATCH 248/314] usb: ehci-orion: fix clock reference leaking In order to disable the clock in the ->remove() function, a call to devm_clk_get() is being made, which further increases the reference count of the clock. In order to clean this up, a private structure holding a pointer to the clock is added using the override mechanism provided by the ehci framework. This makes the driver clock handling much more logical. The bug was introduced in v3.6, however the ehci framework allowing to use the override mechanism has only been introduced in v3.8, so this patch won't apply before it. [Thomas: reword commit log, fix goto label names.] Fixes: 8c869edaee07c623066266827371235fb9c12e01 ('ARM: Orion: EHCI: Add support for enabling clocks') Cc: # v3.8+ Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-orion.c | 45 ++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9298be7c0f9b..9c98bac0a5bc 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -42,6 +42,12 @@ #define DRIVER_DESC "EHCI orion driver" +#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv) + +struct orion_ehci_hcd { + struct clk *clk; +}; + static const char hcd_name[] = "ehci-orion"; static struct hc_driver __read_mostly ehci_orion_hc_driver; @@ -137,6 +143,10 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } +static const struct ehci_driver_overrides orion_overrides __initconst = { + .extra_priv_size = sizeof(struct orion_ehci_hcd), +}; + static int ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev); @@ -144,10 +154,10 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; struct ehci_hcd *ehci; - struct clk *clk; void __iomem *regs; int irq, err; enum orion_ehci_phy_ver phy_version; + struct orion_ehci_hcd *priv; if (usb_disabled()) return -ENODEV; @@ -187,17 +197,11 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) goto err; } - /* Not all platforms can gate the clock, so it is not - an error if the clock does not exists. */ - clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - hcd = usb_create_hcd(&ehci_orion_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { err = -ENOMEM; - goto err_create_hcd; + goto err; } hcd->rsrc_start = res->start; @@ -208,6 +212,15 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) ehci->caps = hcd->regs + 0x100; hcd->has_tt = 1; + priv = hcd_to_orion_priv(hcd); + /* + * Not all platforms can gate the clock, so it is not an error if + * the clock does not exists. + */ + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(priv->clk)) + clk_prepare_enable(priv->clk); + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -243,10 +256,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) return 0; err_add_hcd: + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); usb_put_hcd(hcd); -err_create_hcd: - if (!IS_ERR(clk)) - clk_disable_unprepare(clk); err: dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), err); @@ -257,14 +269,15 @@ err: static int ehci_orion_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct clk *clk; + struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd); usb_remove_hcd(hcd); + + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); + usb_put_hcd(hcd); - clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) - clk_disable_unprepare(clk); return 0; } @@ -292,7 +305,7 @@ static int __init ehci_orion_init(void) pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_orion_hc_driver, NULL); + ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides); return platform_driver_register(&ehci_orion_driver); } module_init(ehci_orion_init); From d445913ce0ab7f8e96dfb471ea7ab5c5f648f518 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 15 May 2014 12:17:29 +0200 Subject: [PATCH 249/314] usb: ehci-orion: add optional PHY support This commit extends the ehci-orion so that it can optionally be passed a reference to a PHY through the Device Tree. It will be useful for the Armada 375 SoCs. If no PHY is provided then the behavior of the driver is unchanged. [Thomas: use devm_phy_optional_get() so that we handle -EPROBE_DEFER properly. Also call phy_power_off() when needed, and rename goto labels.] Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-orion.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9c98bac0a5bc..22e15cab8ea5 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -46,6 +47,7 @@ struct orion_ehci_hcd { struct clk *clk; + struct phy *phy; }; static const char hcd_name[] = "ehci-orion"; @@ -221,6 +223,20 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) if (!IS_ERR(priv->clk)) clk_prepare_enable(priv->clk); + priv->phy = devm_phy_optional_get(&pdev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + goto err_phy_get; + } else { + err = phy_init(priv->phy); + if (err) + goto err_phy_init; + + err = phy_power_on(priv->phy); + if (err) + goto err_phy_power_on; + } + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -256,6 +272,13 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) return 0; err_add_hcd: + if (!IS_ERR(priv->phy)) + phy_power_off(priv->phy); +err_phy_power_on: + if (!IS_ERR(priv->phy)) + phy_exit(priv->phy); +err_phy_init: +err_phy_get: if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); usb_put_hcd(hcd); @@ -273,6 +296,11 @@ static int ehci_orion_drv_remove(struct platform_device *pdev) usb_remove_hcd(hcd); + if (!IS_ERR(priv->phy)) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); From 03398cfbfc4c2d473e03b0fb9438b3d84f31e713 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 15 May 2014 12:17:30 +0200 Subject: [PATCH 250/314] Documentation: dt-bindings: update ehci-orion binding documentation This commit updates the Device Tree binding documentation of ehci-orion to take into account the fact that we can now optionally pass a clock and a PHY reference. Signed-off-by: Thomas Petazzoni Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/ehci-orion.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt index 6bc09ec14c4d..17c3bc858b86 100644 --- a/Documentation/devicetree/bindings/usb/ehci-orion.txt +++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt @@ -6,6 +6,11 @@ Required properties: region. - interrupts: The EHCI interrupt +Optional properties: +- clocks: reference to the clock +- phys: reference to the USB PHY +- phy-names: name of the USB PHY, should be "usb" + Example: ehci@50000 { From 48157bb97f074d21372bd3ae87e5988ed23c8972 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 15 May 2014 12:17:31 +0200 Subject: [PATCH 251/314] usb: host: xhci-plat: sort the headers in alphabetic order Sorting the headers in alphabetic order will help to reduce the conflict when adding new headers later. Signed-off-by: Gregory CLEMENT Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 151901ce1ba9..f5351af4b2c5 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -11,11 +11,11 @@ * version 2 as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include +#include +#include +#include #include "xhci.h" From 4718c177405112386a977fd9f1cba5fd6aa82315 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 15 May 2014 12:17:32 +0200 Subject: [PATCH 252/314] usb: host: xhci-plat: add clock support Some platforms (such as the Armada 38x ones) can gate the clock of their USB controller. This patch adds the support for one clock in xhci-plat, by enabling it during probe and disabling it on remove. To achieve this, it adds a 'struct clk *' member in xhci_hcd. While only used for now in xhci-plat, it might be used by other drivers in the future. Moreover, the xhci_hcd structure already holds other members such as msix_count and msix_entries, which are MSI-X specific, and therefore only used by xhci-pci. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Acked-by: Felipe Balbi Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 24 +++++++++++++++++++++++- drivers/usb/host/xhci.h | 2 ++ 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index f5351af4b2c5..8108e58c9e02 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -11,6 +11,7 @@ * version 2 as published by the Free Software Foundation. */ +#include #include #include #include @@ -91,6 +92,7 @@ static int xhci_plat_probe(struct platform_device *pdev) struct xhci_hcd *xhci; struct resource *res; struct usb_hcd *hcd; + struct clk *clk; int ret; int irq; @@ -137,14 +139,27 @@ static int xhci_plat_probe(struct platform_device *pdev) goto release_mem_region; } + /* + * Not all platforms have a clk so it is not an error if the + * clock does not exists. + */ + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) + goto unmap_registers; + } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) - goto unmap_registers; + goto disable_clk; + device_wakeup_enable(hcd->self.controller); /* USB 2.0 roothub is stored in the platform_device now. */ hcd = platform_get_drvdata(pdev); xhci = hcd_to_xhci(hcd); + xhci->clk = clk; xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, dev_name(&pdev->dev), hcd); if (!xhci->shared_hcd) { @@ -173,6 +188,10 @@ put_usb3_hcd: dealloc_usb2_hcd: usb_remove_hcd(hcd); +disable_clk: + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); + unmap_registers: iounmap(hcd->regs); @@ -189,11 +208,14 @@ static int xhci_plat_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct clk *clk = xhci->clk; usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); usb_remove_hcd(hcd); + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 2774526449a6..9ffecd56600d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1472,6 +1472,8 @@ struct xhci_hcd { /* msi-x vectors */ int msix_count; struct msix_entry *msix_entries; + /* optional clock */ + struct clk *clk; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; From 973747928514bb636e3fe6a13b7ec6d6d73100f0 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 15 May 2014 12:17:33 +0200 Subject: [PATCH 253/314] usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers The Armada 375 and 38x SoCs come with an XHCI controller that requires some specific initialization related to the MBus windows configuration. This patch adds the support for this special configuration as an XHCI quirk executed during probe. Two new compatible strings are added to identify the Armada 375 and Armada 38x XHCI controllers, and therefore enable the relevant quirk. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 8 ++++ drivers/usb/host/Makefile | 3 ++ drivers/usb/host/xhci-mvebu.c | 72 +++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci-mvebu.h | 21 ++++++++++ drivers/usb/host/xhci-plat.c | 12 ++++++ 5 files changed, 116 insertions(+) create mode 100644 drivers/usb/host/xhci-mvebu.c create mode 100644 drivers/usb/host/xhci-mvebu.h diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 52144c720a1d..22b50624f0f9 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -29,6 +29,14 @@ if USB_XHCI_HCD config USB_XHCI_PLATFORM tristate +config USB_XHCI_MVEBU + tristate "xHCI support for Marvell Armada 375/38x" + select USB_XHCI_PLATFORM + depends on ARCH_MVEBU || COMPILE_TEST + ---help--- + Say 'Y' to enable the support for the xHCI host controller + found in Marvell Armada 375/38x ARM SOCs. + endif # USB_XHCI_HCD config USB_EHCI_HCD diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index ea2bec52a4fb..af89a903d97e 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -19,6 +19,9 @@ xhci-hcd-$(CONFIG_PCI) += xhci-pci.o ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) xhci-hcd-y += xhci-plat.o +ifneq ($(CONFIG_USB_XHCI_MVEBU), ) + xhci-hcd-y += xhci-mvebu.o +endif endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c new file mode 100644 index 000000000000..1eefc988192d --- /dev/null +++ b/drivers/usb/host/xhci-mvebu.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2014 Marvell + * Author: Gregory CLEMENT + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include "xhci-mvebu.h" + +#define USB3_MAX_WINDOWS 4 +#define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) +#define USB3_WIN_BASE(w) (0x4 + ((w) * 8)) + +static void xhci_mvebu_mbus_config(void __iomem *base, + const struct mbus_dram_target_info *dram) +{ + int win; + + /* Clear all existing windows */ + for (win = 0; win < USB3_MAX_WINDOWS; win++) { + writel(0, base + USB3_WIN_CTRL(win)); + writel(0, base + USB3_WIN_BASE(win)); + } + + /* Program each DRAM CS in a seperate window */ + for (win = 0; win < dram->num_cs; win++) { + const struct mbus_dram_window *cs = dram->cs + win; + + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + base + USB3_WIN_CTRL(win)); + + writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win)); + } +} + +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + const struct mbus_dram_target_info *dram; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + return -ENODEV; + + /* + * We don't use devm_ioremap() because this mapping should + * only exists for the duration of this probe function. + */ + base = ioremap(res->start, resource_size(res)); + if (!base) + return -ENODEV; + + dram = mv_mbus_dram_info(); + xhci_mvebu_mbus_config(base, dram); + + /* + * This memory area was only needed to configure the MBus + * windows, and is therefore no longer useful. + */ + iounmap(base); + + return 0; +} diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h new file mode 100644 index 000000000000..7ede92aa41f6 --- /dev/null +++ b/drivers/usb/host/xhci-mvebu.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Marvell + * + * Gregory Clement + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LINUX_XHCI_MVEBU_H +#define __LINUX_XHCI_MVEBU_H +#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev); +#else +static inline int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev) +{ + return 0; +} +#endif +#endif /* __LINUX_XHCI_MVEBU_H */ diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 8108e58c9e02..0f5f4c8f5bf6 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -19,6 +19,7 @@ #include #include "xhci.h" +#include "xhci-mvebu.h" static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { @@ -109,6 +110,15 @@ static int xhci_plat_probe(struct platform_device *pdev) if (!res) return -ENODEV; + if (of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-375-xhci") || + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-380-xhci")) { + ret = xhci_mvebu_mbus_init_quirk(pdev); + if (ret) + return ret; + } + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret) @@ -253,6 +263,8 @@ static const struct dev_pm_ops xhci_plat_pm_ops = { static const struct of_device_id usb_xhci_of_match[] = { { .compatible = "generic-xhci" }, { .compatible = "xhci-platform" }, + { .compatible = "marvell,armada-375-xhci"}, + { .compatible = "marvell,armada-380-xhci"}, { }, }; MODULE_DEVICE_TABLE(of, usb_xhci_of_match); From 023bfe83e278dca17abc491f8e1182211edb0559 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 15 May 2014 12:17:34 +0200 Subject: [PATCH 254/314] Documentation: dt-bindings: update xhci-platform DT binding This commit extends the compatible string list of the xhci-platform binding with the new "armada-375-xhci" and "armada-380-xhci" compatible strings. It is used to describe the XHCI controller which is available in the Armada 375 and 38x SoCs. It also indicates that an optional 'clocks' property is now supported. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 90f8f607d125..999be5ca901c 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -1,11 +1,16 @@ USB xHCI controllers Required properties: - - compatible: should be "generic-xhci" (deprecated: "xhci-platform"). + - compatible: should be one of "generic-xhci", + "marvell,armada-375-xhci", "marvell,armada-380-xhci" (deprecated: + "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. +Optional property: + - clocks: reference to a clock + Example: usb@f0931000 { compatible = "generic-xhci"; From 8b3e233e8121d241a93f27a093c1440673d3a7ff Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 7 May 2014 08:30:33 -0500 Subject: [PATCH 255/314] usb: dwc2: Disable descriptor dma mode by default Even though the IP supports Descriptor DMA mode, it does not support SPLIT transactions in this mode. So the driver, in its currently form, will not support LS/FS devices when connected to a HS Hub if Descriptor DMA mode is enabled. So we should just default to disable descriptor dma mode. Signed-off-by: Dinh Nguyen Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/platform.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index eaba547ce26b..a10e7a353576 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -134,6 +134,12 @@ static int dwc2_driver_probe(struct platform_device *dev) /* Default all params to autodetect */ dwc2_set_all_params(&defparams, -1); params = &defparams; + + /* + * Disable descriptor dma mode by default as the HW can support + * it, but does not support it for SPLIT transactions. + */ + defparams.dma_desc_enable = 0; } hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); From 112fe8e290d9b1c8651de6c7d010041f0ff44b6d Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 7 May 2014 08:31:29 -0500 Subject: [PATCH 256/314] usb: dwc2: Add function to calculate correct FIFO sizes The dwc2 IP on the SOCFPGA cannot use the default HW configured FIFO sizes. The total FIFO depth as read from GHWCFG3 reports 0x1f80 or 8064 32-bit words. But the GRXFSIZ, GNPTXFSIZ, and HPTXFSIZ register defaults to 0x2000 or 8192 32-bit words. So the driver cannot just use the fifo sizes as read from those registers. For platforms that face the same issue, this commits sets the RX, periodic TX, and non-periodic TX fifo size to those that are recommended v2.93a spec for the DWC2 IP. Implements Method #2 from the Synopsys v2.93a spec for the DWC2. Signed-off-by: Dinh Nguyen Acked-by: Paul Zimmerman Reviewed-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/core.c | 68 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 1d129884cc39..27d2c9b8a034 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -507,6 +507,72 @@ void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) writel(intmsk, hsotg->regs + GINTMSK); } +/* + * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size + * For system that have a total fifo depth that is smaller than the default + * RX + TX fifo size. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *params = hsotg->core_params; + struct dwc2_hw_params *hw = &hsotg->hw_params; + u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; + + total_fifo_size = hw->total_fifo_size; + rxfsiz = params->host_rx_fifo_size; + nptxfsiz = params->host_nperio_tx_fifo_size; + ptxfsiz = params->host_perio_tx_fifo_size; + + /* + * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth + * allocation with support for high bandwidth endpoints. Synopsys + * defines MPS(Max Packet size) for a periodic EP=1024, and for + * non-periodic as 512. + */ + if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { + /* + * For Buffer DMA mode/Scatter Gather DMA mode + * 2 * ((Largest Packet size / 4) + 1 + 1) + n + * with n = number of host channel. + * 2 * ((1024/4) + 2) = 516 + */ + rxfsiz = 516 + hw->host_channels; + + /* + * min non-periodic tx fifo depth + * 2 * (largest non-periodic USB packet used / 4) + * 2 * (512/4) = 256 + */ + nptxfsiz = 256; + + /* + * min periodic tx fifo depth + * (largest packet size*MC)/4 + * (1024 * 3)/4 = 768 + */ + ptxfsiz = 768; + + params->host_rx_fifo_size = rxfsiz; + params->host_nperio_tx_fifo_size = nptxfsiz; + params->host_perio_tx_fifo_size = ptxfsiz; + } + + /* + * If the summation of RX, NPTX and PTX fifo sizes is still + * bigger than the total_fifo_size, then we have a problem. + * + * We won't be able to allocate as many endpoints. Right now, + * we're just printing an error message, but ideally this FIFO + * allocation algorithm would be improved in the future. + * + * FIXME improve this FIFO allocation algorithm. + */ + if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) + dev_err(hsotg->dev, "invalid fifo sizes\n"); +} + static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *params = hsotg->core_params; @@ -515,6 +581,8 @@ static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) if (!params->enable_dynamic_fifo) return; + dwc2_calculate_dynamic_fifo(hsotg); + /* Rx FIFO */ grxfsiz = readl(hsotg->regs + GRXFSIZ); dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); From 274f6afa298791df97fd37b7bc9d8327f5cf6ee9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 15:52:19 +0200 Subject: [PATCH 257/314] usb: xhci: avoid warning for !PM_SLEEP If we build a kernel with PM_SUSPEND set and no PM_SLEEP, we get a build warning in the xhci-plat driver about unused functions. To fix this, use "#ifdef CONFIG_PM_SLEEP", like we do in most other drivers nowadays. Signed-off-by: Arnd Bergmann Cc: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 0f5f4c8f5bf6..39c367393eed 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -234,7 +234,7 @@ static int xhci_plat_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int xhci_plat_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); From 068413e9b7beb0843704ebaee3fb20f31c9a4cdf Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 15:52:21 +0200 Subject: [PATCH 258/314] usb: ohci-da8xx can only be built-in The PHY setup code of the TI DaVinci DA8xx OHCI controller uses ad-hoc register access using a pointer that is meant to be used only by the DaVinci platform implementation and that is intentionally not exported to loadable modules. This results in a link error on configurations that use a modular OHCI code on this platform. While the proper solution for this problem would be to implement a real PHY driver shared by ohci-da8xx and musb-da8xx, this patch for now just works around the build error by only allowing the ohci-da8xx code to be built-in. Signed-off-by: Arnd Bergmann Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 10 ++++++++++ drivers/usb/host/ohci-hcd.c | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 22b50624f0f9..363fc212c618 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -435,6 +435,16 @@ config USB_OHCI_HCD_OMAP3 Enables support for the on-chip OHCI controller on OMAP3 and later chips. +config USB_OHCI_HCD_DAVINCI + bool "OHCI support for TI DaVinci DA8xx" + depends on ARCH_DAVINCI_DA8XX + depends on USB_OHCI_HCD=y + default y + help + Enables support for the DaVinci DA8xx integrated OHCI + controller. This driver cannot currently be a loadable + module because it lacks a proper PHY abstraction. + config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" depends on (SOC_AR71XX || SOC_AR724X) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 3586460fb2a1..f98d03f3144c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1178,7 +1178,7 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#ifdef CONFIG_ARCH_DAVINCI_DA8XX +#ifdef CONFIG_USB_OHCI_HCD_DAVINCI #include "ohci-da8xx.c" #define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif From 38e0c109404506266e33c29c77c2da39630954a4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 8 May 2014 15:52:20 +0200 Subject: [PATCH 259/314] usb: ohci: sort out dependencies for lpc32xx and omap The dependency on the isp1301 driver is not something that should be in the main OHCI driver but rather the SoC specific part of it. This moves the dependency for LPC32xx into USB_OHCI_HCD_LPC32XX, and changes the 'select ISP1301_OMAP' to a similar 'depends on'. Since the same dependency exists for the client driver, do the same change there. Signed-off-by: Arnd Bergmann Cc: linux-omap@vger.kernel.org Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 4 ++-- drivers/usb/host/Kconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7fca52bfe5b1..ba18e9c110cc 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -157,7 +157,7 @@ config USB_AT91 config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX && I2C select USB_ISP1301 help This option selects the USB device controller in the LPC32xx SoC. @@ -226,7 +226,7 @@ config USB_GR_UDC config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 363fc212c618..61b7817bd66b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -363,8 +363,6 @@ config USB_MAX3421_HCD config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -383,6 +381,7 @@ if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. @@ -406,6 +405,7 @@ config USB_OHCI_HCD_S3C2410 config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_ISP1301 default y ---help--- Enables support for the on-chip OHCI controller on From 4615f3bd089fc4c549ed90e14982b360779feb50 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 13 May 2014 17:44:20 +0200 Subject: [PATCH 260/314] usb: ohci-platform: Enable optional use of reset controller The OHCI controllers used in the Allwinner A31 are asserted in reset using a global reset controller. Add optional support for such a controller in the OHCI platform driver. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/usb-ohci.txt | 1 + drivers/usb/host/ohci-platform.c | 27 ++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index 45f67d91e888..b968a1aea995 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -12,6 +12,7 @@ Optional properties: - clocks : a list of phandle + clock specifier pairs - phys : phandle + phy specifier pair - phy-names : "usb" +- resets : phandle + reset specifier pair Example: diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index b6002c951c5c..4369299064c7 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -36,6 +37,7 @@ struct ohci_platform_priv { struct clk *clks[OHCI_MAX_CLKS]; + struct reset_control *rst; struct phy *phy; }; @@ -191,6 +193,19 @@ static int ohci_platform_probe(struct platform_device *dev) break; } } + + } + + priv->rst = devm_reset_control_get_optional(&dev->dev, NULL); + if (IS_ERR(priv->rst)) { + err = PTR_ERR(priv->rst); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->rst = NULL; + } else { + err = reset_control_deassert(priv->rst); + if (err) + goto err_put_clks; } if (pdata->big_endian_desc) @@ -203,7 +218,7 @@ static int ohci_platform_probe(struct platform_device *dev) dev_err(&dev->dev, "Error: CONFIG_USB_OHCI_BIG_ENDIAN_MMIO not set\n"); err = -EINVAL; - goto err_put_clks; + goto err_reset; } #endif #ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC @@ -211,14 +226,14 @@ static int ohci_platform_probe(struct platform_device *dev) dev_err(&dev->dev, "Error: CONFIG_USB_OHCI_BIG_ENDIAN_DESC not set\n"); err = -EINVAL; - goto err_put_clks; + goto err_reset; } #endif if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - goto err_put_clks; + goto err_reset; } hcd->rsrc_start = res_mem->start; @@ -242,6 +257,9 @@ static int ohci_platform_probe(struct platform_device *dev) err_power: if (pdata->power_off) pdata->power_off(dev); +err_reset: + if (priv->rst) + reset_control_assert(priv->rst); err_put_clks: while (--clk >= 0) clk_put(priv->clks[clk]); @@ -266,6 +284,9 @@ static int ohci_platform_remove(struct platform_device *dev) if (pdata->power_off) pdata->power_off(dev); + if (priv->rst) + reset_control_assert(priv->rst); + for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) clk_put(priv->clks[clk]); From 2d87bbd634b0fe5aa2285fd2a095867158fb2cc3 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Tue, 13 May 2014 17:44:19 +0200 Subject: [PATCH 261/314] usb: ehci-platform: add optional reset controller retrieval On the Allwinner's A31 SoC the reset line connected to the EHCI IP has to be deasserted for the EHCI block to be usable. Add support for an optional reset controller that will be deasserted on power off and asserted on power on. Signed-off-by: Boris BREZILLON Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/usb-ehci.txt | 1 + drivers/usb/host/ehci-platform.c | 26 ++++++++++++++++--- 2 files changed, 24 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index ff151ec084c4..43c1a4e06767 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -15,6 +15,7 @@ Optional properties: - clocks : a list of phandle + clock specifier pairs - phys : phandle + phy specifier pair - phy-names : "usb" + - resets : phandle + reset specifier pair Example (Sequoia 440EPx): ehci@e0000300 { diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index c7dd93aad20c..2f5b9ce3e042 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -41,6 +42,7 @@ struct ehci_platform_priv { struct clk *clks[EHCI_MAX_CLKS]; + struct reset_control *rst; struct phy *phy; }; @@ -208,6 +210,18 @@ static int ehci_platform_probe(struct platform_device *dev) } } + priv->rst = devm_reset_control_get_optional(&dev->dev, NULL); + if (IS_ERR(priv->rst)) { + err = PTR_ERR(priv->rst); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->rst = NULL; + } else { + err = reset_control_deassert(priv->rst); + if (err) + goto err_put_clks; + } + if (pdata->big_endian_desc) ehci->big_endian_desc = 1; if (pdata->big_endian_mmio) @@ -218,7 +232,7 @@ static int ehci_platform_probe(struct platform_device *dev) dev_err(&dev->dev, "Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n"); err = -EINVAL; - goto err_put_clks; + goto err_reset; } #endif #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC @@ -226,14 +240,14 @@ static int ehci_platform_probe(struct platform_device *dev) dev_err(&dev->dev, "Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n"); err = -EINVAL; - goto err_put_clks; + goto err_reset; } #endif if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - goto err_put_clks; + goto err_reset; } hcd->rsrc_start = res_mem->start; @@ -256,6 +270,9 @@ static int ehci_platform_probe(struct platform_device *dev) err_power: if (pdata->power_off) pdata->power_off(dev); +err_reset: + if (priv->rst) + reset_control_assert(priv->rst); err_put_clks: while (--clk >= 0) clk_put(priv->clks[clk]); @@ -280,6 +297,9 @@ static int ehci_platform_remove(struct platform_device *dev) if (pdata->power_off) pdata->power_off(dev); + if (priv->rst) + reset_control_assert(priv->rst); + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) clk_put(priv->clks[clk]); From 85f4e45b11e5d351789e09c259620d037246f6d8 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 14 May 2014 14:00:23 +0200 Subject: [PATCH 262/314] xhci: unified loggig of RESET_ON_RESUME Either we log for all chips we set the quirk for or for none. This patch reports it for all chips. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 35d447780707..ffd119eb3e29 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -140,8 +140,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; - xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, - "QUIRK: Resetting on resume"); xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && @@ -149,6 +147,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; + + if (xhci->quirks & XHCI_RESET_ON_RESUME) + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Resetting on resume"); } /* called during probe() after chip reset completes */ From 113229b881b866f3f53ad52cb88f3812ba0fe922 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Wed, 14 May 2014 20:17:30 +0100 Subject: [PATCH 263/314] phy: Enable USB PHY support for arm64 Signed-off-by: Liviu Dudau Signed-off-by: Ryan Harkin Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index c9950becb7e0..e253fa05be68 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -217,7 +217,7 @@ config USB_RCAR_GEN2_PHY config USB_ULPI bool "Generic ULPI Transceiver Driver" - depends on ARM + depends on ARM || ARM64 help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. From 849b1333153c989b3618e05981fd23f61fcfdee4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 19 May 2014 06:31:07 +0200 Subject: [PATCH 264/314] usb: gadget: make return of 0 explicit Delete unnecessary local variable whose value is always 0 and that hides the fact that the result is always 0. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ local idexpression ret; expression e; position p; @@ -ret = 0; ... when != ret = e return - ret + 0 ; // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 6 ++---- drivers/usb/gadget/dummy_hcd.c | 4 +--- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 042c66b71df8..f80151932053 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1312,9 +1312,7 @@ static void fill_ext_compat(struct usb_configuration *c, u8 *buf) static int count_ext_prop(struct usb_configuration *c, int interface) { struct usb_function *f; - int j, res; - - res = 0; + int j; f = c->interface[interface]; for (j = 0; j < f->os_desc_n; ++j) { @@ -1326,7 +1324,7 @@ static int count_ext_prop(struct usb_configuration *c, int interface) if (d && d->ext_compat_id) return d->ext_prop_count; } - return res; + return 0; } static int len_ext_prop(struct usb_configuration *c, int interface) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 8c06430dcc47..2b54955d3166 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -561,7 +561,6 @@ static int dummy_disable(struct usb_ep *_ep) struct dummy_ep *ep; struct dummy *dum; unsigned long flags; - int retval; ep = usb_ep_to_dummy_ep(_ep); if (!_ep || !ep->desc || _ep->name == ep0name) @@ -571,12 +570,11 @@ static int dummy_disable(struct usb_ep *_ep) spin_lock_irqsave(&dum->lock, flags); ep->desc = NULL; ep->stream_en = 0; - retval = 0; nuke(dum, ep); spin_unlock_irqrestore(&dum->lock, flags); dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name); - return retval; + return 0; } static struct usb_request *dummy_alloc_request(struct usb_ep *_ep, From c4128cac3557ddd5fa972cb6511c426cd94a7ccd Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Thu, 15 May 2014 14:28:46 +0200 Subject: [PATCH 265/314] usb: gadget: net2280: Add support for PLX USB338X This patch adds support for the PLX USB3380 and USB3382. This driver is based on the driver from the manufacturer. Since USB338X is register compatible with NET2280, I thought that it would be better to include this hardware into net2280 driver. Manufacturer's driver only supported the USB33X, did not follow the Kernel Style and contain some trivial errors. This patch has tried to address this issues. This patch has only been tested on USB338x hardware, but the merge has been done trying to not affect the behaviour of NET2280. Signed-off-by: Ricardo Ribalda Delgado Tested-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 10 +- drivers/usb/gadget/net2280.c | 1113 +++++++++++++++++++++++++++++++--- drivers/usb/gadget/net2280.h | 97 ++- include/linux/usb/usb338x.h | 199 ++++++ 4 files changed, 1329 insertions(+), 90 deletions(-) create mode 100644 include/linux/usb/usb338x.h diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index ba18e9c110cc..49e434ec527d 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -409,7 +409,7 @@ config USB_NET2272_DMA If unsure, say "N" here. The driver works fine in PIO mode. config USB_NET2280 - tristate "NetChip 228x" + tristate "NetChip 228x / PLX USB338x" depends on PCI help NetChip 2280 / 2282 is a PCI based USB peripheral controller which @@ -419,6 +419,14 @@ config USB_NET2280 (for control transfers) and several endpoints with dedicated functions. + PLX 3380 / 3382 is a PCIe based USB peripheral controller which + supports full, high speed USB 2.0 and super speed USB 3.0 + data transfers. + + It has eight configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + Say "y" to link the driver statically, or "m" to build a dynamically linked module called "net2280" and force all gadget drivers to also be dynamically linked. diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 300b3a71383b..87789c9bf7fe 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -18,6 +18,9 @@ * hint to completely eliminate some IRQs, if a later IRQ is guaranteed * and DMA chaining is enabled. * + * MSI is enabled by default. The legacy IRQ is used if MSI couldn't + * be enabled. + * * Note that almost all the errata workarounds here are only needed for * rev1 chips. Rev1a silicon (0110) fixes almost all of them. */ @@ -25,10 +28,14 @@ /* * Copyright (C) 2003 David Brownell * Copyright (C) 2003-2005 PLX Technology, Inc. + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS * * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility * with 2282 chip * + * Modified Ricardo Ribalda Qtechnology AS to provide compatibility + * with usb 338x chip. Based on PLX driver + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -61,9 +68,8 @@ #include #include - -#define DRIVER_DESC "PLX NET228x USB Peripheral Controller" -#define DRIVER_VERSION "2005 Sept 27" +#define DRIVER_DESC "PLX NET228x/USB338x USB Peripheral Controller" +#define DRIVER_VERSION "2005 Sept 27/v3.0" #define EP_DONTUSE 13 /* nonzero */ @@ -73,11 +79,12 @@ static const char driver_name [] = "net2280"; static const char driver_desc [] = DRIVER_DESC; +static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 }; static const char ep0name [] = "ep0"; static const char *const ep_name [] = { ep0name, "ep-a", "ep-b", "ep-c", "ep-d", - "ep-e", "ep-f", + "ep-e", "ep-f", "ep-g", "ep-h", }; /* use_dma -- general goodness, fewer interrupts, less cpu load (vs PIO) @@ -90,11 +97,12 @@ static const char *const ep_name [] = { */ static bool use_dma = 1; static bool use_dma_chaining = 0; +static bool use_msi = 1; /* "modprobe net2280 use_dma=n" etc */ module_param (use_dma, bool, S_IRUGO); module_param (use_dma_chaining, bool, S_IRUGO); - +module_param(use_msi, bool, S_IRUGO); /* mode 0 == ep-{a,b,c,d} 1K fifo each * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable @@ -148,6 +156,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) struct net2280_ep *ep; u32 max, tmp; unsigned long flags; + static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 }; + static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, + 0x50, 0x20, 0x70, 0x40, 0x90 }; ep = container_of (_ep, struct net2280_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name @@ -161,11 +172,20 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) return -EDOM; + if (dev->pdev->vendor == 0x10b5) { + if ((desc->bEndpointAddress & 0x0f) >= 0x0c) + return -EDOM; + ep->is_in = !!usb_endpoint_dir_in(desc); + if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) + return -EINVAL; + } + /* sanity check ep-e/ep-f since their fifos are small */ max = usb_endpoint_maxp (desc) & 0x1fff; - if (ep->num > 4 && max > 64) + if (ep->num > 4 && max > 64 && (dev->pdev->vendor == 0x17cc)) return -ERANGE; + spin_lock_irqsave (&dev->lock, flags); _ep->maxpacket = max & 0x7ff; ep->desc = desc; @@ -176,7 +196,8 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ep->out_overflow = 0; /* set speed-dependent max packet; may kick in high bandwidth */ - set_idx_reg (dev->regs, REG_EP_MAXPKT (dev, ep->num), max); + set_idx_reg(dev->regs, (dev->enhanced_mode) ? ep_enhanced[ep->num] + : REG_EP_MAXPKT(dev, ep->num), max); /* FIFO lines can't go to different packets. PIO is ok, so * use it instead of troublesome (non-bulk) multi-packet DMA. @@ -199,23 +220,43 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) &ep->regs->ep_rsp); } else if (tmp == USB_ENDPOINT_XFER_BULK) { /* catch some particularly blatant driver bugs */ - if ((dev->gadget.speed == USB_SPEED_HIGH - && max != 512) - || (dev->gadget.speed == USB_SPEED_FULL - && max > 64)) { - spin_unlock_irqrestore (&dev->lock, flags); + if ((dev->gadget.speed == USB_SPEED_SUPER && max != 1024) || + (dev->gadget.speed == USB_SPEED_HIGH && max != 512) || + (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { + spin_unlock_irqrestore(&dev->lock, flags); return -ERANGE; } } ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0; - tmp <<= ENDPOINT_TYPE; - tmp |= desc->bEndpointAddress; - tmp |= (4 << ENDPOINT_BYTE_COUNT); /* default full fifo lines */ - tmp |= 1 << ENDPOINT_ENABLE; - wmb (); + /* Enable this endpoint */ + if (dev->pdev->vendor == 0x17cc) { + tmp <<= ENDPOINT_TYPE; + tmp |= desc->bEndpointAddress; + /* default full fifo lines */ + tmp |= (4 << ENDPOINT_BYTE_COUNT); + tmp |= 1 << ENDPOINT_ENABLE; + ep->is_in = (tmp & USB_DIR_IN) != 0; + } else { + /* In Legacy mode, only OUT endpoints are used */ + if (dev->enhanced_mode && ep->is_in) { + tmp <<= IN_ENDPOINT_TYPE; + tmp |= (1 << IN_ENDPOINT_ENABLE); + /* Not applicable to Legacy */ + tmp |= (1 << ENDPOINT_DIRECTION); + } else { + tmp <<= OUT_ENDPOINT_TYPE; + tmp |= (1 << OUT_ENDPOINT_ENABLE); + tmp |= (ep->is_in << ENDPOINT_DIRECTION); + } + + tmp |= usb_endpoint_num(desc); + tmp |= (ep->ep.maxburst << MAX_BURST_SIZE); + } + + /* Make sure all the registers are written before ep_rsp*/ + wmb(); /* for OUT transfers, block the rx fifo until a read is posted */ - ep->is_in = (tmp & USB_DIR_IN) != 0; if (!ep->is_in) writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); else if (dev->pdev->device != 0x2280) { @@ -226,11 +267,13 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); } - writel (tmp, &ep->regs->ep_cfg); + writel(tmp, &ep->cfg->ep_cfg); /* enable irqs */ if (!ep->dma) { /* pio, per-packet */ - tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); + tmp = (dev->pdev->vendor == 0x17cc)?(1 << ep->num) + : (1 << ep_bit[ep->num]); + tmp |= readl(&dev->regs->pciirqenb0); writel (tmp, &dev->regs->pciirqenb0); tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) @@ -251,8 +294,10 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) tmp = (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE); writel (tmp, &ep->regs->ep_irqenb); - tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); - writel (tmp, &dev->regs->pciirqenb0); + tmp = (dev->pdev->vendor == 0x17cc)?(1 << ep->num) + : (1 << ep_bit[ep->num]); + tmp |= readl(&dev->regs->pciirqenb0); + writel(tmp, &dev->regs->pciirqenb0); } } @@ -286,7 +331,8 @@ static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) static const struct usb_ep_ops net2280_ep_ops; -static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) +static void ep_reset_228x(struct net2280_regs __iomem *regs, + struct net2280_ep *ep) { u32 tmp; @@ -361,6 +407,55 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) /* fifo size is handled separately */ } +static void ep_reset_338x(struct net2280_regs __iomem *regs, + struct net2280_ep *ep) +{ + u32 tmp, dmastat; + + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.ops = &net2280_ep_ops; + + /* disable the dma, irqs, endpoint... */ + if (ep->dma) { + writel(0, &ep->dma->dmactl); + writel((1 << DMA_ABORT_DONE_INTERRUPT) | + (1 << DMA_PAUSE_DONE_INTERRUPT) | + (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) | + (1 << DMA_TRANSACTION_DONE_INTERRUPT) + /* | (1 << DMA_ABORT) */ + , &ep->dma->dmastat); + + dmastat = readl(&ep->dma->dmastat); + if (dmastat == 0x5002) { + WARNING(ep->dev, "The dmastat return = %x!!\n", + dmastat); + writel(0x5a, &ep->dma->dmastat); + } + + tmp = readl(®s->pciirqenb0); + tmp &= ~(1 << ep_bit[ep->num]); + writel(tmp, ®s->pciirqenb0); + } else { + if (ep->num < 5) { + tmp = readl(®s->pciirqenb1); + tmp &= ~(1 << (8 + ep->num)); /* completion */ + writel(tmp, ®s->pciirqenb1); + } + } + writel(0, &ep->regs->ep_irqenb); + + writel((1 << SHORT_PACKET_OUT_DONE_INTERRUPT) | + (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | + (1 << FIFO_OVERFLOW) | + (1 << DATA_PACKET_RECEIVED_INTERRUPT) | + (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) | + (1 << DATA_OUT_PING_TOKEN_INTERRUPT) | + (1 << DATA_IN_TOKEN_INTERRUPT), &ep->regs->ep_stat); +} + static void nuke (struct net2280_ep *); static int net2280_disable (struct usb_ep *_ep) @@ -374,13 +469,17 @@ static int net2280_disable (struct usb_ep *_ep) spin_lock_irqsave (&ep->dev->lock, flags); nuke (ep); - ep_reset (ep->dev->regs, ep); + + if (ep->dev->pdev->vendor == 0x10b5) + ep_reset_338x(ep->dev->regs, ep); + else + ep_reset_228x(ep->dev->regs, ep); VDEBUG (ep->dev, "disabled %s %s\n", ep->dma ? "dma" : "pio", _ep->name); /* synch memory views with the device */ - (void) readl (&ep->regs->ep_cfg); + (void)readl(&ep->cfg->ep_cfg); if (use_dma && !ep->dma && ep->num >= 1 && ep->num <= 4) ep->dma = &ep->dev->dma [ep->num - 1]; @@ -698,6 +797,8 @@ static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma) writel (readl (&dma->dmastat), &dma->dmastat); writel (td_dma, &dma->dmadesc); + if (ep->dev->pdev->vendor == 0x10b5) + dmactl |= (0x01 << DMA_REQUEST_OUTSTANDING); writel (dmactl, &dma->dmactl); /* erratum 0116 workaround part 3: pci arbiter away from net2280 */ @@ -772,6 +873,21 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) start_queue (ep, tmp, req->td_dma); } +static inline void resume_dma(struct net2280_ep *ep) +{ + writel(readl(&ep->dma->dmactl) | (1 << DMA_ENABLE), &ep->dma->dmactl); + + ep->dma_started = true; +} + +static inline void ep_stop_dma(struct net2280_ep *ep) +{ + writel(readl(&ep->dma->dmactl) & ~(1 << DMA_ENABLE), &ep->dma->dmactl); + spin_stop_dma(ep->dma); + + ep->dma_started = false; +} + static inline void queue_dma (struct net2280_ep *ep, struct net2280_request *req, int valid) { @@ -874,8 +990,23 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* kickstart this i/o queue? */ if (list_empty (&ep->queue) && !ep->stopped) { + /* DMA request while EP halted */ + if (ep->dma && + (readl(&ep->regs->ep_rsp) & (1 << CLEAR_ENDPOINT_HALT)) && + (dev->pdev->vendor == 0x10b5)) { + int valid = 1; + if (ep->is_in) { + int expect; + expect = likely(req->req.zero || + ((req->req.length % + ep->ep.maxpacket) != 0)); + if (expect != ep->in_fifo_validate) + valid = 0; + } + queue_dma(ep, req, valid); + } /* use DMA if the endpoint supports it, else pio */ - if (ep->dma) + else if (ep->dma) start_dma (ep, req); else { /* maybe there's no control data, just status ack */ @@ -993,6 +1124,8 @@ static void scan_dma_completions (struct net2280_ep *ep) } else if (!ep->is_in && (req->req.length % ep->ep.maxpacket) != 0) { tmp = readl (&ep->regs->ep_stat); + if (ep->dev->pdev->vendor == 0x10b5) + return dma_done(ep, req, tmp, 0); /* AVOID TROUBLE HERE by not issuing short reads from * your gadget driver. That helps avoids errata 0121, @@ -1079,7 +1212,7 @@ static void restart_dma (struct net2280_ep *ep) start_queue (ep, dmactl, req->td_dma); } -static void abort_dma (struct net2280_ep *ep) +static void abort_dma_228x(struct net2280_ep *ep) { /* abort the current transfer */ if (likely (!list_empty (&ep->queue))) { @@ -1091,6 +1224,19 @@ static void abort_dma (struct net2280_ep *ep) scan_dma_completions (ep); } +static void abort_dma_338x(struct net2280_ep *ep) +{ + writel((1 << DMA_ABORT), &ep->dma->dmastat); + spin_stop_dma(ep->dma); +} + +static void abort_dma(struct net2280_ep *ep) +{ + if (ep->dev->pdev->vendor == 0x17cc) + return abort_dma_228x(ep); + return abort_dma_338x(ep); +} + /* dequeue ALL requests */ static void nuke (struct net2280_ep *ep) { @@ -1244,6 +1390,9 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) ep->wedged = 1; } else { clear_halt (ep); + if (ep->dev->pdev->vendor == 0x10b5 && + !list_empty(&ep->queue) && ep->td_dma) + restart_dma(ep); ep->wedged = 0; } (void) readl (&ep->regs->ep_rsp); @@ -1367,10 +1516,13 @@ static int net2280_set_selfpowered (struct usb_gadget *_gadget, int value) spin_lock_irqsave (&dev->lock, flags); tmp = readl (&dev->usb->usbctl); - if (value) + if (value) { tmp |= (1 << SELF_POWERED_STATUS); - else + dev->selfpowered = 1; + } else { tmp &= ~(1 << SELF_POWERED_STATUS); + dev->selfpowered = 0; + } writel (tmp, &dev->usb->usbctl); spin_unlock_irqrestore (&dev->lock, flags); @@ -1504,14 +1656,14 @@ static ssize_t registers_show(struct device *_dev, /* DMA Control Registers */ /* Configurable EP Control Registers */ - for (i = 0; i < 7; i++) { + for (i = 0; i < dev->n_ep; i++) { struct net2280_ep *ep; ep = &dev->ep [i]; if (i && !ep->desc) continue; - t1 = readl (&ep->regs->ep_cfg); + t1 = readl(&ep->cfg->ep_cfg); t2 = readl (&ep->regs->ep_rsp) & 0xff; t = scnprintf (next, size, "\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s" @@ -1571,7 +1723,7 @@ static ssize_t registers_show(struct device *_dev, t = scnprintf (next, size, "\nirqs: "); size -= t; next += t; - for (i = 0; i < 7; i++) { + for (i = 0; i < dev->n_ep; i++) { struct net2280_ep *ep; ep = &dev->ep [i]; @@ -1606,7 +1758,7 @@ static ssize_t queues_show(struct device *_dev, struct device_attribute *attr, size = PAGE_SIZE; spin_lock_irqsave (&dev->lock, flags); - for (i = 0; i < 7; i++) { + for (i = 0; i < dev->n_ep; i++) { struct net2280_ep *ep = &dev->ep [i]; struct net2280_request *req; int t; @@ -1735,6 +1887,121 @@ static void set_fifo_mode (struct net2280 *dev, int mode) list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list); } +static void defect7374_disable_data_eps(struct net2280 *dev) +{ + /* + * For Defect 7374, disable data EPs (and more): + * - This phase undoes the earlier phase of the Defect 7374 workaround, + * returing ep regs back to normal. + */ + struct net2280_ep *ep; + int i; + unsigned char ep_sel; + u32 tmp_reg; + + for (i = 1; i < 5; i++) { + ep = &dev->ep[i]; + writel(0, &ep->cfg->ep_cfg); + } + + /* CSROUT, CSRIN, PCIOUT, PCIIN, STATIN, RCIN */ + for (i = 0; i < 6; i++) + writel(0, &dev->dep[i].dep_cfg); + + for (ep_sel = 0; ep_sel <= 21; ep_sel++) { + /* Select an endpoint for subsequent operations: */ + tmp_reg = readl(&dev->plregs->pl_ep_ctrl); + writel(((tmp_reg & ~0x1f) | ep_sel), &dev->plregs->pl_ep_ctrl); + + if (ep_sel < 2 || (ep_sel > 9 && ep_sel < 14) || + ep_sel == 18 || ep_sel == 20) + continue; + + /* Change settings on some selected endpoints */ + tmp_reg = readl(&dev->plregs->pl_ep_cfg_4); + tmp_reg &= ~(1 << NON_CTRL_IN_TOLERATE_BAD_DIR); + writel(tmp_reg, &dev->plregs->pl_ep_cfg_4); + tmp_reg = readl(&dev->plregs->pl_ep_ctrl); + tmp_reg |= (1 << EP_INITIALIZED); + writel(tmp_reg, &dev->plregs->pl_ep_ctrl); + } +} + +static void defect7374_enable_data_eps_zero(struct net2280 *dev) +{ + u32 tmp = 0, tmp_reg; + u32 fsmvalue, scratch; + int i; + unsigned char ep_sel; + + scratch = get_idx_reg(dev->regs, SCRATCH); + fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD); + scratch &= ~(0xf << DEFECT7374_FSM_FIELD); + + /*See if firmware needs to set up for workaround*/ + if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) { + WARNING(dev, "Operate Defect 7374 workaround soft this time"); + WARNING(dev, "It will operate on cold-reboot and SS connect"); + + /*GPEPs:*/ + tmp = ((0 << ENDPOINT_NUMBER) | (1 << ENDPOINT_DIRECTION) | + (2 << OUT_ENDPOINT_TYPE) | (2 << IN_ENDPOINT_TYPE) | + ((dev->enhanced_mode) ? + 1 << OUT_ENDPOINT_ENABLE : 1 << ENDPOINT_ENABLE) | + (1 << IN_ENDPOINT_ENABLE)); + + for (i = 1; i < 5; i++) + writel(tmp, &dev->ep[i].cfg->ep_cfg); + + /* CSRIN, PCIIN, STATIN, RCIN*/ + tmp = ((0 << ENDPOINT_NUMBER) | (1 << ENDPOINT_ENABLE)); + writel(tmp, &dev->dep[1].dep_cfg); + writel(tmp, &dev->dep[3].dep_cfg); + writel(tmp, &dev->dep[4].dep_cfg); + writel(tmp, &dev->dep[5].dep_cfg); + + /*Implemented for development and debug. + * Can be refined/tuned later.*/ + for (ep_sel = 0; ep_sel <= 21; ep_sel++) { + /* Select an endpoint for subsequent operations: */ + tmp_reg = readl(&dev->plregs->pl_ep_ctrl); + writel(((tmp_reg & ~0x1f) | ep_sel), + &dev->plregs->pl_ep_ctrl); + + if (ep_sel == 1) { + tmp = + (readl(&dev->plregs->pl_ep_ctrl) | + (1 << CLEAR_ACK_ERROR_CODE) | 0); + writel(tmp, &dev->plregs->pl_ep_ctrl); + continue; + } + + if (ep_sel == 0 || (ep_sel > 9 && ep_sel < 14) || + ep_sel == 18 || ep_sel == 20) + continue; + + tmp = (readl(&dev->plregs->pl_ep_cfg_4) | + (1 << NON_CTRL_IN_TOLERATE_BAD_DIR) | 0); + writel(tmp, &dev->plregs->pl_ep_cfg_4); + + tmp = readl(&dev->plregs->pl_ep_ctrl) & + ~(1 << EP_INITIALIZED); + writel(tmp, &dev->plregs->pl_ep_ctrl); + + } + + /* Set FSM to focus on the first Control Read: + * - Tip: Connection speed is known upon the first + * setup request.*/ + scratch |= DEFECT7374_FSM_WAITING_FOR_CONTROL_READ; + set_idx_reg(dev->regs, SCRATCH, scratch); + + } else{ + WARNING(dev, "Defect 7374 workaround soft will NOT operate"); + WARNING(dev, "It will operate on cold-reboot and SS connect"); + } +} + /* keeping it simple: * - one bus driver, initted first; * - one function driver, initted second @@ -1744,7 +2011,7 @@ static void set_fifo_mode (struct net2280 *dev, int mode) * perhaps to bind specific drivers to specific devices. */ -static void usb_reset (struct net2280 *dev) +static void usb_reset_228x(struct net2280 *dev) { u32 tmp; @@ -1760,11 +2027,11 @@ static void usb_reset (struct net2280 *dev) /* clear old dma and irq state */ for (tmp = 0; tmp < 4; tmp++) { - struct net2280_ep *ep = &dev->ep [tmp + 1]; - + struct net2280_ep *ep = &dev->ep[tmp + 1]; if (ep->dma) - abort_dma (ep); + abort_dma(ep); } + writel (~0, &dev->regs->irqstat0), writel (~(1 << SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1), @@ -1780,7 +2047,67 @@ static void usb_reset (struct net2280 *dev) set_fifo_mode (dev, (fifo_mode <= 2) ? fifo_mode : 0); } -static void usb_reinit (struct net2280 *dev) +static void usb_reset_338x(struct net2280 *dev) +{ + u32 tmp; + u32 fsmvalue; + + dev->gadget.speed = USB_SPEED_UNKNOWN; + (void)readl(&dev->usb->usbctl); + + net2280_led_init(dev); + + fsmvalue = get_idx_reg(dev->regs, SCRATCH) & + (0xf << DEFECT7374_FSM_FIELD); + + /* See if firmware needs to set up for workaround: */ + if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) { + INFO(dev, "%s: Defect 7374 FsmValue 0x%08X\n", __func__, + fsmvalue); + } else { + /* disable automatic responses, and irqs */ + writel(0, &dev->usb->stdrsp); + writel(0, &dev->regs->pciirqenb0); + writel(0, &dev->regs->pciirqenb1); + } + + /* clear old dma and irq state */ + for (tmp = 0; tmp < 4; tmp++) { + struct net2280_ep *ep = &dev->ep[tmp + 1]; + + if (ep->dma) + abort_dma(ep); + } + + writel(~0, &dev->regs->irqstat0), writel(~0, &dev->regs->irqstat1); + + if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) { + /* reset, and enable pci */ + tmp = readl(&dev->regs->devinit) | + (1 << PCI_ENABLE) | + (1 << FIFO_SOFT_RESET) | + (1 << USB_SOFT_RESET) | + (1 << M8051_RESET); + + writel(tmp, &dev->regs->devinit); + } + + /* always ep-{1,2,3,4} ... maybe not ep-3 or ep-4 */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + + for (tmp = 1; tmp < dev->n_ep; tmp++) + list_add_tail(&dev->ep[tmp].ep.ep_list, &dev->gadget.ep_list); + +} + +static void usb_reset(struct net2280 *dev) +{ + if (dev->pdev->vendor == 0x17cc) + return usb_reset_228x(dev); + return usb_reset_338x(dev); +} + +static void usb_reinit_228x(struct net2280 *dev) { u32 tmp; int init_dma; @@ -1803,7 +2130,8 @@ static void usb_reinit (struct net2280 *dev) } else ep->fifo_size = 64; ep->regs = &dev->epregs [tmp]; - ep_reset (dev->regs, ep); + ep->cfg = &dev->epregs[tmp]; + ep_reset_228x(dev->regs, ep); } usb_ep_set_maxpacket_limit(&dev->ep [0].ep, 64); usb_ep_set_maxpacket_limit(&dev->ep [5].ep, 64); @@ -1820,7 +2148,122 @@ static void usb_reinit (struct net2280 *dev) writel (EP_DONTUSE, &dev->dep [tmp].dep_cfg); } -static void ep0_start (struct net2280 *dev) +static void usb_reinit_338x(struct net2280 *dev) +{ + int init_dma; + int i; + u32 tmp, val; + u32 fsmvalue; + static const u32 ne[9] = { 0, 1, 2, 3, 4, 1, 2, 3, 4 }; + static const u32 ep_reg_addr[9] = { 0x00, 0xC0, 0x00, 0xC0, 0x00, + 0x00, 0xC0, 0x00, 0xC0 }; + + /* use_dma changes are ignored till next device re-init */ + init_dma = use_dma; + + /* basic endpoint init */ + for (i = 0; i < dev->n_ep; i++) { + struct net2280_ep *ep = &dev->ep[i]; + + ep->ep.name = ep_name[i]; + ep->dev = dev; + ep->num = i; + + if (i > 0 && i <= 4 && init_dma) + ep->dma = &dev->dma[i - 1]; + + if (dev->enhanced_mode) { + ep->cfg = &dev->epregs[ne[i]]; + ep->regs = (struct net2280_ep_regs __iomem *) + (((void *)&dev->epregs[ne[i]]) + + ep_reg_addr[i]); + ep->fiforegs = &dev->fiforegs[i]; + } else { + ep->cfg = &dev->epregs[i]; + ep->regs = &dev->epregs[i]; + ep->fiforegs = &dev->fiforegs[i]; + } + + ep->fifo_size = (i != 0) ? 2048 : 512; + + ep_reset_338x(dev->regs, ep); + } + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 512); + + dev->gadget.ep0 = &dev->ep[0].ep; + dev->ep[0].stopped = 0; + + /* Link layer set up */ + fsmvalue = get_idx_reg(dev->regs, SCRATCH) & + (0xf << DEFECT7374_FSM_FIELD); + + /* See if driver needs to set up for workaround: */ + if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) + INFO(dev, "%s: Defect 7374 FsmValue %08x\n", + __func__, fsmvalue); + else { + tmp = readl(&dev->usb_ext->usbctl2) & + ~((1 << U1_ENABLE) | (1 << U2_ENABLE) | (1 << LTM_ENABLE)); + writel(tmp, &dev->usb_ext->usbctl2); + } + + /* Hardware Defect and Workaround */ + val = readl(&dev->ll_lfps_regs->ll_lfps_5); + val &= ~(0xf << TIMER_LFPS_6US); + val |= 0x5 << TIMER_LFPS_6US; + writel(val, &dev->ll_lfps_regs->ll_lfps_5); + + val = readl(&dev->ll_lfps_regs->ll_lfps_6); + val &= ~(0xffff << TIMER_LFPS_80US); + val |= 0x0100 << TIMER_LFPS_80US; + writel(val, &dev->ll_lfps_regs->ll_lfps_6); + + /* + * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB + * Hot Reset Exit Handshake may Fail in Specific Case using + * Default Register Settings. Workaround for Enumeration test. + */ + val = readl(&dev->ll_tsn_regs->ll_tsn_counters_2); + val &= ~(0x1f << HOT_TX_NORESET_TS2); + val |= 0x10 << HOT_TX_NORESET_TS2; + writel(val, &dev->ll_tsn_regs->ll_tsn_counters_2); + + val = readl(&dev->ll_tsn_regs->ll_tsn_counters_3); + val &= ~(0x1f << HOT_RX_RESET_TS2); + val |= 0x3 << HOT_RX_RESET_TS2; + writel(val, &dev->ll_tsn_regs->ll_tsn_counters_3); + + /* + * Set Recovery Idle to Recover bit: + * - On SS connections, setting Recovery Idle to Recover Fmw improves + * link robustness with various hosts and hubs. + * - It is safe to set for all connection speeds; all chip revisions. + * - R-M-W to leave other bits undisturbed. + * - Reference PLX TT-7372 + */ + val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit); + val |= (1 << RECOVERY_IDLE_TO_RECOVER_FMW); + writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit); + + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + + /* disable dedicated endpoints */ + writel(0x0D, &dev->dep[0].dep_cfg); + writel(0x0D, &dev->dep[1].dep_cfg); + writel(0x0E, &dev->dep[2].dep_cfg); + writel(0x0E, &dev->dep[3].dep_cfg); + writel(0x0F, &dev->dep[4].dep_cfg); + writel(0x0C, &dev->dep[5].dep_cfg); +} + +static void usb_reinit(struct net2280 *dev) +{ + if (dev->pdev->vendor == 0x17cc) + return usb_reinit_228x(dev); + return usb_reinit_338x(dev); +} + +static void ep0_start_228x(struct net2280 *dev) { writel ( (1 << CLEAR_EP_HIDE_STATUS_PHASE) | (1 << CLEAR_NAK_OUT_PACKETS) @@ -1863,6 +2306,61 @@ static void ep0_start (struct net2280 *dev) (void) readl (&dev->usb->usbctl); } +static void ep0_start_338x(struct net2280 *dev) +{ + u32 fsmvalue; + + fsmvalue = get_idx_reg(dev->regs, SCRATCH) & + (0xf << DEFECT7374_FSM_FIELD); + + if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) + INFO(dev, "%s: Defect 7374 FsmValue %08x\n", __func__, + fsmvalue); + else + writel((1 << CLEAR_NAK_OUT_PACKETS_MODE) | + (1 << SET_EP_HIDE_STATUS_PHASE), + &dev->epregs[0].ep_rsp); + + /* + * hardware optionally handles a bunch of standard requests + * that the API hides from drivers anyway. have it do so. + * endpoint status/features are handled in software, to + * help pass tests for some dubious behavior. + */ + writel((1 << SET_ISOCHRONOUS_DELAY) | + (1 << SET_SEL) | + (1 << SET_TEST_MODE) | + (1 << SET_ADDRESS) | + (1 << GET_INTERFACE_STATUS) | + (1 << GET_DEVICE_STATUS), + &dev->usb->stdrsp); + dev->wakeup_enable = 1; + writel((1 << USB_ROOT_PORT_WAKEUP_ENABLE) | + (dev->softconnect << USB_DETECT_ENABLE) | + (1 << DEVICE_REMOTE_WAKEUP_ENABLE), + &dev->usb->usbctl); + + /* enable irqs so we can see ep0 and general operation */ + writel((1 << SETUP_PACKET_INTERRUPT_ENABLE) | + (1 << ENDPOINT_0_INTERRUPT_ENABLE) + , &dev->regs->pciirqenb0); + writel((1 << PCI_INTERRUPT_ENABLE) | + (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) | + (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) | + (1 << VBUS_INTERRUPT_ENABLE), + &dev->regs->pciirqenb1); + + /* don't leave any writes posted */ + (void)readl(&dev->usb->usbctl); +} + +static void ep0_start(struct net2280 *dev) +{ + if (dev->pdev->vendor == 0x17cc) + return ep0_start_228x(dev); + return ep0_start_338x(dev); +} + /* when a driver is successfully registered, it will receive * control requests including set_configuration(), which enables * non-control requests. then usb traffic follows until a @@ -1886,7 +2384,7 @@ static int net2280_start(struct usb_gadget *_gadget, dev = container_of (_gadget, struct net2280, gadget); - for (i = 0; i < 7; i++) + for (i = 0; i < dev->n_ep; i++) dev->ep [i].irqs = 0; /* hook up the driver ... */ @@ -1900,13 +2398,17 @@ static int net2280_start(struct usb_gadget *_gadget, if (retval) goto err_func; /* Enable force-full-speed testing mode, if desired */ - if (full_speed) + if (full_speed && dev->pdev->vendor == 0x17cc) writel(1 << FORCE_FULL_SPEED_MODE, &dev->usb->xcvrdiag); /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. */ net2280_led_active (dev, 1); + + if (dev->pdev->vendor == 0x10b5) + defect7374_enable_data_eps_zero(dev); + ep0_start (dev); DEBUG (dev, "%s ready, usbctl %08x stdrsp %08x\n", @@ -1937,7 +2439,7 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) * and kill any outstanding requests. */ usb_reset (dev); - for (i = 0; i < 7; i++) + for (i = 0; i < dev->n_ep; i++) nuke (&dev->ep [i]); /* report disconnect; the driver is already quiesced */ @@ -1967,7 +2469,8 @@ static int net2280_stop(struct usb_gadget *_gadget, net2280_led_active (dev, 0); /* Disable full-speed test mode */ - writel(0, &dev->usb->xcvrdiag); + if (dev->pdev->vendor == 0x17cc) + writel(0, &dev->usb->xcvrdiag); device_remove_file (&dev->pdev->dev, &dev_attr_function); device_remove_file (&dev->pdev->dev, &dev_attr_queues); @@ -2219,6 +2722,350 @@ get_ep_by_addr (struct net2280 *dev, u16 wIndex) return NULL; } +static void defect7374_workaround(struct net2280 *dev, struct usb_ctrlrequest r) +{ + u32 scratch, fsmvalue; + u32 ack_wait_timeout, state; + + /* Workaround for Defect 7374 (U1/U2 erroneously rejected): */ + scratch = get_idx_reg(dev->regs, SCRATCH); + fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD); + scratch &= ~(0xf << DEFECT7374_FSM_FIELD); + + if (!((fsmvalue == DEFECT7374_FSM_WAITING_FOR_CONTROL_READ) && + (r.bRequestType & USB_DIR_IN))) + return; + + /* This is the first Control Read for this connection: */ + if (!(readl(&dev->usb->usbstat) & (1 << SUPER_SPEED_MODE))) { + /* + * Connection is NOT SS: + * - Connection must be FS or HS. + * - This FSM state should allow workaround software to + * run after the next USB connection. + */ + scratch |= DEFECT7374_FSM_NON_SS_CONTROL_READ; + goto restore_data_eps; + } + + /* Connection is SS: */ + for (ack_wait_timeout = 0; + ack_wait_timeout < DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS; + ack_wait_timeout++) { + + state = readl(&dev->plregs->pl_ep_status_1) + & (0xff << STATE); + if ((state >= (ACK_GOOD_NORMAL << STATE)) && + (state <= (ACK_GOOD_MORE_ACKS_TO_COME << STATE))) { + scratch |= DEFECT7374_FSM_SS_CONTROL_READ; + break; + } + + /* + * We have not yet received host's Data Phase ACK + * - Wait and try again. + */ + udelay(DEFECT_7374_PROCESSOR_WAIT_TIME); + + continue; + } + + + if (ack_wait_timeout >= DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS) { + ERROR(dev, "FAIL: Defect 7374 workaround waited but failed"); + ERROR(dev, "to detect SS host's data phase ACK."); + ERROR(dev, "PL_EP_STATUS_1(23:16):.Expected from 0x11 to 0x16"); + ERROR(dev, "got 0x%2.2x.\n", state >> STATE); + } else { + WARNING(dev, "INFO: Defect 7374 workaround waited about\n"); + WARNING(dev, "%duSec for Control Read Data Phase ACK\n", + DEFECT_7374_PROCESSOR_WAIT_TIME * ack_wait_timeout); + } + +restore_data_eps: + /* + * Restore data EPs to their pre-workaround settings (disabled, + * initialized, and other details). + */ + defect7374_disable_data_eps(dev); + + set_idx_reg(dev->regs, SCRATCH, scratch); + + return; +} + +static void ep_stall(struct net2280_ep *ep, int stall) +{ + struct net2280 *dev = ep->dev; + u32 val; + static const u32 ep_pl[9] = { 0, 3, 4, 7, 8, 2, 5, 6, 9 }; + + if (stall) { + writel((1 << SET_ENDPOINT_HALT) | + /* (1 << SET_NAK_PACKETS) | */ + (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), + &ep->regs->ep_rsp); + ep->is_halt = 1; + } else { + if (dev->gadget.speed == USB_SPEED_SUPER) { + /* + * Workaround for SS SeqNum not cleared via + * Endpoint Halt (Clear) bit. select endpoint + */ + val = readl(&dev->plregs->pl_ep_ctrl); + val = (val & ~0x1f) | ep_pl[ep->num]; + writel(val, &dev->plregs->pl_ep_ctrl); + + val |= (1 << SEQUENCE_NUMBER_RESET); + writel(val, &dev->plregs->pl_ep_ctrl); + } + val = readl(&ep->regs->ep_rsp); + val |= (1 << CLEAR_ENDPOINT_HALT) | + (1 << CLEAR_ENDPOINT_TOGGLE); + writel(val + /* | (1 << CLEAR_NAK_PACKETS)*/ + , &ep->regs->ep_rsp); + ep->is_halt = 0; + val = readl(&ep->regs->ep_rsp); + } +} + +static void ep_stdrsp(struct net2280_ep *ep, int value, int wedged) +{ + /* set/clear, then synch memory views with the device */ + if (value) { + ep->stopped = 1; + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else { + if (ep->dma) + ep_stop_dma(ep); + ep_stall(ep, true); + } + + if (wedged) + ep->wedged = 1; + } else { + ep->stopped = 0; + ep->wedged = 0; + + ep_stall(ep, false); + + /* Flush the queue */ + if (!list_empty(&ep->queue)) { + struct net2280_request *req = + list_entry(ep->queue.next, struct net2280_request, + queue); + if (ep->dma) + resume_dma(ep); + else { + if (ep->is_in) + write_fifo(ep, &req->req); + else { + if (read_fifo(ep, req)) + done(ep, req, 0); + } + } + } + } +} + +static void handle_stat0_irqs_superspeed(struct net2280 *dev, + struct net2280_ep *ep, struct usb_ctrlrequest r) +{ + int tmp = 0; + +#define w_value le16_to_cpu(r.wValue) +#define w_index le16_to_cpu(r.wIndex) +#define w_length le16_to_cpu(r.wLength) + + switch (r.bRequest) { + struct net2280_ep *e; + u16 status; + + case USB_REQ_SET_CONFIGURATION: + dev->addressed_state = !w_value; + goto usb3_delegate; + + case USB_REQ_GET_STATUS: + switch (r.bRequestType) { + case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE): + status = dev->wakeup_enable ? 0x02 : 0x00; + if (dev->selfpowered) + status |= 1 << 0; + status |= (dev->u1_enable << 2 | dev->u2_enable << 3 | + dev->ltm_enable << 4); + writel(0, &dev->epregs[0].ep_irqenb); + set_fifo_bytecount(ep, sizeof(status)); + writel((__force u32) status, &dev->epregs[0].ep_data); + allow_status_338x(ep); + break; + + case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + e = get_ep_by_addr(dev, w_index); + if (!e) + goto do_stall3; + status = readl(&e->regs->ep_rsp) & + (1 << CLEAR_ENDPOINT_HALT); + writel(0, &dev->epregs[0].ep_irqenb); + set_fifo_bytecount(ep, sizeof(status)); + writel((__force u32) status, &dev->epregs[0].ep_data); + allow_status_338x(ep); + break; + + default: + goto usb3_delegate; + } + break; + + case USB_REQ_CLEAR_FEATURE: + switch (r.bRequestType) { + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (!dev->addressed_state) { + switch (w_value) { + case USB_DEVICE_U1_ENABLE: + dev->u1_enable = 0; + writel(readl(&dev->usb_ext->usbctl2) & + ~(1 << U1_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_U2_ENABLE: + dev->u2_enable = 0; + writel(readl(&dev->usb_ext->usbctl2) & + ~(1 << U2_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_LTM_ENABLE: + dev->ltm_enable = 0; + writel(readl(&dev->usb_ext->usbctl2) & + ~(1 << LTM_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + default: + break; + } + } + if (w_value == USB_DEVICE_REMOTE_WAKEUP) { + dev->wakeup_enable = 0; + writel(readl(&dev->usb->usbctl) & + ~(1 << DEVICE_REMOTE_WAKEUP_ENABLE), + &dev->usb->usbctl); + allow_status_338x(ep); + break; + } + goto usb3_delegate; + + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + e = get_ep_by_addr(dev, w_index); + if (!e) + goto do_stall3; + if (w_value != USB_ENDPOINT_HALT) + goto do_stall3; + VDEBUG(dev, "%s clear halt\n", e->ep.name); + ep_stall(e, false); + if (!list_empty(&e->queue) && e->td_dma) + restart_dma(e); + allow_status(ep); + ep->stopped = 1; + break; + + default: + goto usb3_delegate; + } + break; + case USB_REQ_SET_FEATURE: + switch (r.bRequestType) { + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE): + if (!dev->addressed_state) { + switch (w_value) { + case USB_DEVICE_U1_ENABLE: + dev->u1_enable = 1; + writel(readl(&dev->usb_ext->usbctl2) | + (1 << U1_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_U2_ENABLE: + dev->u2_enable = 1; + writel(readl(&dev->usb_ext->usbctl2) | + (1 << U2_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + + case USB_DEVICE_LTM_ENABLE: + dev->ltm_enable = 1; + writel(readl(&dev->usb_ext->usbctl2) | + (1 << LTM_ENABLE), + &dev->usb_ext->usbctl2); + allow_status_338x(ep); + goto next_endpoints3; + default: + break; + } + } + + if (w_value == USB_DEVICE_REMOTE_WAKEUP) { + dev->wakeup_enable = 1; + writel(readl(&dev->usb->usbctl) | + (1 << DEVICE_REMOTE_WAKEUP_ENABLE), + &dev->usb->usbctl); + allow_status_338x(ep); + break; + } + goto usb3_delegate; + + case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): + e = get_ep_by_addr(dev, w_index); + if (!e || (w_value != USB_ENDPOINT_HALT)) + goto do_stall3; + ep_stdrsp(e, true, false); + allow_status_338x(ep); + break; + + default: + goto usb3_delegate; + } + + break; + default: + +usb3_delegate: + VDEBUG(dev, "setup %02x.%02x v%04x i%04x l%04x ep_cfg %08x\n", + r.bRequestType, r.bRequest, + w_value, w_index, w_length, + readl(&ep->cfg->ep_cfg)); + + ep->responded = 0; + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &r); + spin_lock(&dev->lock); + } +do_stall3: + if (tmp < 0) { + VDEBUG(dev, "req %02x.%02x protocol STALL; stat %d\n", + r.bRequestType, r.bRequest, tmp); + dev->protocol_stall = 1; + /* TD 9.9 Halt Endpoint test. TD 9.22 Set feature test */ + ep_stall(ep, true); + } + +next_endpoints3: + +#undef w_value +#undef w_index +#undef w_length + + return; +} + static void handle_stat0_irqs (struct net2280 *dev, u32 stat) { struct net2280_ep *ep; @@ -2240,10 +3087,20 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) struct net2280_request *req; if (dev->gadget.speed == USB_SPEED_UNKNOWN) { - if (readl (&dev->usb->usbstat) & (1 << HIGH_SPEED)) + u32 val = readl(&dev->usb->usbstat); + if (val & (1 << SUPER_SPEED)) { + dev->gadget.speed = USB_SPEED_SUPER; + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, + EP0_SS_MAX_PACKET_SIZE); + } else if (val & (1 << HIGH_SPEED)) { dev->gadget.speed = USB_SPEED_HIGH; - else + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, + EP0_HS_MAX_PACKET_SIZE); + } else { dev->gadget.speed = USB_SPEED_FULL; + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, + EP0_HS_MAX_PACKET_SIZE); + } net2280_led_speed (dev, dev->gadget.speed); DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed)); } @@ -2261,32 +3118,38 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) } ep->stopped = 0; dev->protocol_stall = 0; + if (dev->pdev->vendor == 0x10b5) + ep->is_halt = 0; + else{ + if (ep->dev->pdev->device == 0x2280) + tmp = (1 << FIFO_OVERFLOW) | + (1 << FIFO_UNDERFLOW); + else + tmp = 0; - if (ep->dev->pdev->device == 0x2280) - tmp = (1 << FIFO_OVERFLOW) - | (1 << FIFO_UNDERFLOW); - else - tmp = 0; - - writel (tmp | (1 << TIMEOUT) - | (1 << USB_STALL_SENT) - | (1 << USB_IN_NAK_SENT) - | (1 << USB_IN_ACK_RCVD) - | (1 << USB_OUT_PING_NAK_SENT) - | (1 << USB_OUT_ACK_SENT) - | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) - | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) - | (1 << DATA_PACKET_RECEIVED_INTERRUPT) - | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) - | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) - | (1 << DATA_IN_TOKEN_INTERRUPT) - , &ep->regs->ep_stat); - u.raw [0] = readl (&dev->usb->setup0123); - u.raw [1] = readl (&dev->usb->setup4567); + writel(tmp | (1 << TIMEOUT) | + (1 << USB_STALL_SENT) | + (1 << USB_IN_NAK_SENT) | + (1 << USB_IN_ACK_RCVD) | + (1 << USB_OUT_PING_NAK_SENT) | + (1 << USB_OUT_ACK_SENT) | + (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) | + (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | + (1 << DATA_PACKET_RECEIVED_INTERRUPT) | + (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) | + (1 << DATA_OUT_PING_TOKEN_INTERRUPT) | + (1 << DATA_IN_TOKEN_INTERRUPT) + , &ep->regs->ep_stat); + } + u.raw[0] = readl(&dev->usb->setup0123); + u.raw[1] = readl(&dev->usb->setup4567); cpu_to_le32s (&u.raw [0]); cpu_to_le32s (&u.raw [1]); + if (dev->pdev->vendor == 0x10b5) + defect7374_workaround(dev, u.r); + tmp = 0; #define w_value le16_to_cpu(u.r.wValue) @@ -2318,6 +3181,12 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) * everything else goes uplevel to the gadget code. */ ep->responded = 1; + + if (dev->gadget.speed == USB_SPEED_SUPER) { + handle_stat0_irqs_superspeed(dev, ep, u.r); + goto next_endpoints; + } + switch (u.r.bRequest) { case USB_REQ_GET_STATUS: { struct net2280_ep *e; @@ -2360,8 +3229,11 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) VDEBUG(dev, "%s wedged, halt not cleared\n", ep->ep.name); } else { - VDEBUG(dev, "%s clear halt\n", ep->ep.name); + VDEBUG(dev, "%s clear halt\n", e->ep.name); clear_halt(e); + if (ep->dev->pdev->vendor == 0x10b5 && + !list_empty(&e->queue) && e->td_dma) + restart_dma(e); } allow_status (ep); goto next_endpoints; @@ -2381,6 +3253,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (e->ep.name == ep0name) goto do_stall; set_halt (e); + if (dev->pdev->vendor == 0x10b5 && e->dma) + abort_dma(e); allow_status (ep); VDEBUG (dev, "%s set halt\n", ep->ep.name); goto next_endpoints; @@ -2392,7 +3266,7 @@ delegate: "ep_cfg %08x\n", u.r.bRequestType, u.r.bRequest, w_value, w_index, w_length, - readl (&ep->regs->ep_cfg)); + readl(&ep->cfg->ep_cfg)); ep->responded = 0; spin_unlock (&dev->lock); tmp = dev->driver->setup (&dev->gadget, &u.r); @@ -2455,7 +3329,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) /* after disconnect there's nothing else to do! */ tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); - mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); + mask = (1 << SUPER_SPEED) | (1 << HIGH_SPEED) | (1 << FULL_SPEED); /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and @@ -2546,12 +3420,19 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) tmp = readl (&dma->dmastat); writel (tmp, &dma->dmastat); + /* dma sync*/ + if (dev->pdev->vendor == 0x10b5) { + u32 r_dmacount = readl(&dma->dmacount); + if (!ep->is_in && (r_dmacount & 0x00FFFFFF) && + (tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))) + continue; + } + /* chaining should stop on abort, short OUT from fifo, * or (stat0 codepath) short OUT transfer. */ if (!use_dma_chaining) { - if ((tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT)) - == 0) { + if (!(tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))) { DEBUG (ep->dev, "%s no xact done? %08x\n", ep->ep.name, tmp); continue; @@ -2625,7 +3506,8 @@ static irqreturn_t net2280_irq (int irq, void *_dev) struct net2280 *dev = _dev; /* shared interrupt, not ours */ - if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED))) + if (dev->pdev->vendor == 0x17cc && + (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))) return IRQ_NONE; spin_lock (&dev->lock); @@ -2636,6 +3518,13 @@ static irqreturn_t net2280_irq (int irq, void *_dev) /* control requests and PIO */ handle_stat0_irqs (dev, readl (&dev->regs->irqstat0)); + if (dev->pdev->vendor == 0x10b5) { + /* re-enable interrupt to trigger any possible new interrupt */ + u32 pciirqenb1 = readl(&dev->regs->pciirqenb1); + writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1); + writel(pciirqenb1, &dev->regs->pciirqenb1); + } + spin_unlock (&dev->lock); return IRQ_HANDLED; @@ -2674,6 +3563,8 @@ static void net2280_remove (struct pci_dev *pdev) } if (dev->got_irq) free_irq (pdev->irq, dev); + if (use_msi && dev->pdev->vendor == 0x10b5) + pci_disable_msi(pdev); if (dev->regs) iounmap (dev->regs); if (dev->region) @@ -2708,7 +3599,8 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init (&dev->lock); dev->pdev = pdev; dev->gadget.ops = &net2280_ops; - dev->gadget.max_speed = USB_SPEED_HIGH; + dev->gadget.max_speed = (dev->pdev->vendor == 0x10b5) ? + USB_SPEED_SUPER : USB_SPEED_HIGH; /* the "gadget" abstracts/virtualizes the controller */ dev->gadget.name = driver_name; @@ -2750,8 +3642,39 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200); dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300); - /* put into initial config, link up all endpoints */ - writel (0, &dev->usb->usbctl); + if (dev->pdev->vendor == 0x10b5) { + u32 fsmvalue; + u32 usbstat; + dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *) + (base + 0x00b4); + dev->fiforegs = (struct usb338x_fifo_regs __iomem *) + (base + 0x0500); + dev->llregs = (struct usb338x_ll_regs __iomem *) + (base + 0x0700); + dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *) + (base + 0x0748); + dev->ll_tsn_regs = (struct usb338x_ll_tsn_regs __iomem *) + (base + 0x077c); + dev->ll_chicken_reg = (struct usb338x_ll_chi_regs __iomem *) + (base + 0x079c); + dev->plregs = (struct usb338x_pl_regs __iomem *) + (base + 0x0800); + usbstat = readl(&dev->usb->usbstat); + dev->enhanced_mode = (usbstat & (1 << 11)) ? 1 : 0; + dev->n_ep = (dev->enhanced_mode) ? 9 : 5; + /* put into initial config, link up all endpoints */ + fsmvalue = get_idx_reg(dev->regs, SCRATCH) & + (0xf << DEFECT7374_FSM_FIELD); + /* See if firmware needs to set up for workaround: */ + if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) + writel(0, &dev->usb->usbctl); + } else{ + dev->enhanced_mode = 0; + dev->n_ep = 7; + /* put into initial config, link up all endpoints */ + writel(0, &dev->usb->usbctl); + } + usb_reset (dev); usb_reinit (dev); @@ -2762,6 +3685,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) goto done; } + if (use_msi && dev->pdev->vendor == 0x10b5) + if (pci_enable_msi(pdev)) + ERROR(dev, "Failed to enable MSI mode\n"); + if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev) != 0) { ERROR (dev, "request interrupt %d failed\n", pdev->irq); @@ -2797,7 +3724,8 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) } /* enable lower-overhead pci memory bursts during DMA */ - writel ( (1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) + if (dev->pdev->vendor == 0x17cc) + writel((1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) // 256 write retries may not be enough... // | (1 << PCI_RETRY_ABORT_ENABLE) | (1 << DMA_READ_MULTIPLE_ENABLE) @@ -2814,10 +3742,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) INFO (dev, "%s\n", driver_desc); INFO (dev, "irq %d, pci mem %p, chip rev %04x\n", pdev->irq, base, dev->chiprev); - INFO (dev, "version: " DRIVER_VERSION "; dma %s\n", - use_dma - ? (use_dma_chaining ? "chaining" : "enabled") - : "disabled"); + INFO(dev, "version: " DRIVER_VERSION "; dma %s %s\n", + use_dma ? (use_dma_chaining ? "chaining" : "enabled") + : "disabled", + dev->enhanced_mode ? "enhanced mode" : "legacy mode"); retval = device_create_file (&pdev->dev, &dev_attr_registers); if (retval) goto done; @@ -2849,7 +3777,8 @@ static void net2280_shutdown (struct pci_dev *pdev) writel (0, &dev->usb->usbctl); /* Disable full-speed test mode */ - writel(0, &dev->usb->xcvrdiag); + if (dev->pdev->vendor == 0x17cc) + writel(0, &dev->usb->xcvrdiag); } @@ -2869,8 +3798,24 @@ static const struct pci_device_id pci_ids [] = { { .device = 0x2282, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - -}, { /* end: all zeroes */ } +}, + { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x10b5, + .device = 0x3380, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x10b5, + .device = 0x3382, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, +{ /* end: all zeroes */ } }; MODULE_DEVICE_TABLE (pci, pci_ids); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index a844be0d683a..f32c2746b6ae 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -6,6 +6,7 @@ /* * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) * Copyright (C) 2003 David Brownell + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,6 +15,7 @@ */ #include +#include /*-------------------------------------------------------------------------*/ @@ -59,6 +61,13 @@ set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) #define CHIPREV_1 0x0100 #define CHIPREV_1A 0x0110 +/* DEFECT 7374 */ +#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200 +#define DEFECT_7374_PROCESSOR_WAIT_TIME 10 + +/* ep0 max packet size */ +#define EP0_SS_MAX_PACKET_SIZE 0x200 +#define EP0_HS_MAX_PACKET_SIZE 0x40 #ifdef __KERNEL__ /* ep a-f highspeed and fullspeed maxpacket, addresses @@ -85,12 +94,15 @@ struct net2280_dma { struct net2280_ep { struct usb_ep ep; + struct net2280_ep_regs __iomem *cfg; struct net2280_ep_regs __iomem *regs; struct net2280_dma_regs __iomem *dma; struct net2280_dma *dummy; + struct usb338x_fifo_regs __iomem *fiforegs; dma_addr_t td_dma; /* of dummy */ struct net2280 *dev; unsigned long irqs; + unsigned is_halt:1, dma_started:1; /* analogous to a host-side qh */ struct list_head queue; @@ -116,10 +128,19 @@ static inline void allow_status (struct net2280_ep *ep) ep->stopped = 1; } -/* count (<= 4) bytes in the next fifo write will be valid */ -static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) +static void allow_status_338x(struct net2280_ep *ep) { - writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); + /* + * Control Status Phase Handshake was set by the chip when the setup + * packet arrived. While set, the chip automatically NAKs the host's + * Status Phase tokens. + */ + writel(1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE, &ep->regs->ep_rsp); + + ep->stopped = 1; + + /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */ + ep->responded = 0; } struct net2280_request { @@ -135,23 +156,38 @@ struct net2280 { /* each pci device provides one gadget, several endpoints */ struct usb_gadget gadget; spinlock_t lock; - struct net2280_ep ep [7]; + struct net2280_ep ep[9]; struct usb_gadget_driver *driver; unsigned enabled : 1, protocol_stall : 1, softconnect : 1, got_irq : 1, - region : 1; + region:1, + u1_enable:1, + u2_enable:1, + ltm_enable:1, + wakeup_enable:1, + selfpowered:1, + addressed_state:1; u16 chiprev; + int enhanced_mode; + int n_ep; /* pci state used to access those endpoints */ struct pci_dev *pdev; struct net2280_regs __iomem *regs; struct net2280_usb_regs __iomem *usb; + struct usb338x_usb_ext_regs __iomem *usb_ext; struct net2280_pci_regs __iomem *pci; struct net2280_dma_regs __iomem *dma; struct net2280_dep_regs __iomem *dep; struct net2280_ep_regs __iomem *epregs; + struct usb338x_fifo_regs __iomem *fiforegs; + struct usb338x_ll_regs __iomem *llregs; + struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; + struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; + struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; + struct usb338x_pl_regs __iomem *plregs; struct pci_pool *requests; // statistics... @@ -179,6 +215,43 @@ static inline void clear_halt (struct net2280_ep *ep) , &ep->regs->ep_rsp); } +/* + * FSM value for Defect 7374 (U1U2 Test) is managed in + * chip's SCRATCH register: + */ +#define DEFECT7374_FSM_FIELD 28 + +/* Waiting for Control Read: + * - A transition to this state indicates a fresh USB connection, + * before the first Setup Packet. The connection speed is not + * known. Firmware is waiting for the first Control Read. + * - Starting state: This state can be thought of as the FSM's typical + * starting state. + * - Tip: Upon the first SS Control Read the FSM never + * returns to this state. + */ +#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ (1 << DEFECT7374_FSM_FIELD) + +/* Non-SS Control Read: + * - A transition to this state indicates detection of the first HS + * or FS Control Read. + * - Tip: Upon the first SS Control Read the FSM never + * returns to this state. + */ +#define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD) + +/* SS Control Read: + * - A transition to this state indicates detection of the + * first SS Control Read. + * - This state indicates workaround completion. Workarounds no longer + * need to be applied (as long as the chip remains powered up). + * - Tip: Once in this state the FSM state does not change (until + * the chip's power is lost and restored). + * - This can be thought of as the final state of the FSM; + * the FSM 'locks-up' in this state until the chip loses power. + */ +#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD) + #ifdef USE_RDK_LEDS static inline void net2280_led_init (struct net2280 *dev) @@ -198,6 +271,9 @@ void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) { u32 val = readl (&dev->regs->gpioctl); switch (speed) { + case USB_SPEED_SUPER: /* green + red */ + val |= (1 << GPIO0_DATA) | (1 << GPIO1_DATA); + break; case USB_SPEED_HIGH: /* green */ val &= ~(1 << GPIO0_DATA); val |= (1 << GPIO1_DATA); @@ -271,6 +347,17 @@ static inline void net2280_led_shutdown (struct net2280 *dev) /*-------------------------------------------------------------------------*/ +static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count) +{ + if (ep->dev->pdev->vendor == 0x17cc) + writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); + else{ + u32 tmp = readl(&ep->cfg->ep_cfg) & + (~(0x07 << EP_FIFO_BYTE_COUNT)); + writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg); + } +} + static inline void start_out_naking (struct net2280_ep *ep) { /* NOTE: hardware races lurk here, and PING protocol issues */ diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h new file mode 100644 index 000000000000..f92eb635b9d3 --- /dev/null +++ b/include/linux/usb/usb338x.h @@ -0,0 +1,199 @@ +/* + * USB 338x super/high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + * + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_USB_USB338X_H +#define __LINUX_USB_USB338X_H + +#include + +/* + * Extra defined bits for net2280 registers + */ +#define SCRATCH 0x0b + +#define DEFECT7374_FSM_FIELD 28 +#define SUPER_SPEED 8 +#define DMA_REQUEST_OUTSTANDING 5 +#define DMA_PAUSE_DONE_INTERRUPT 26 +#define SET_ISOCHRONOUS_DELAY 24 +#define SET_SEL 22 +#define SUPER_SPEED_MODE 8 + +/*ep_cfg*/ +#define MAX_BURST_SIZE 24 +#define EP_FIFO_BYTE_COUNT 16 +#define IN_ENDPOINT_ENABLE 14 +#define IN_ENDPOINT_TYPE 12 +#define OUT_ENDPOINT_ENABLE 10 +#define OUT_ENDPOINT_TYPE 8 + +struct usb338x_usb_ext_regs { + u32 usbclass; +#define DEVICE_PROTOCOL 16 +#define DEVICE_SUB_CLASS 8 +#define DEVICE_CLASS 0 + u32 ss_sel; +#define U2_SYSTEM_EXIT_LATENCY 8 +#define U1_SYSTEM_EXIT_LATENCY 0 + u32 ss_del; +#define U2_DEVICE_EXIT_LATENCY 8 +#define U1_DEVICE_EXIT_LATENCY 0 + u32 usb2lpm; +#define USB_L1_LPM_HIRD 2 +#define USB_L1_LPM_REMOTE_WAKE 1 +#define USB_L1_LPM_SUPPORT 0 + u32 usb3belt; +#define BELT_MULTIPLIER 10 +#define BEST_EFFORT_LATENCY_TOLERANCE 0 + u32 usbctl2; +#define LTM_ENABLE 7 +#define U2_ENABLE 6 +#define U1_ENABLE 5 +#define FUNCTION_SUSPEND 4 +#define USB3_CORE_ENABLE 3 +#define USB2_CORE_ENABLE 2 +#define SERIAL_NUMBER_STRING_ENABLE 0 + u32 in_timeout; +#define GPEP3_TIMEOUT 19 +#define GPEP2_TIMEOUT 18 +#define GPEP1_TIMEOUT 17 +#define GPEP0_TIMEOUT 16 +#define GPEP3_TIMEOUT_VALUE 13 +#define GPEP3_TIMEOUT_ENABLE 12 +#define GPEP2_TIMEOUT_VALUE 9 +#define GPEP2_TIMEOUT_ENABLE 8 +#define GPEP1_TIMEOUT_VALUE 5 +#define GPEP1_TIMEOUT_ENABLE 4 +#define GPEP0_TIMEOUT_VALUE 1 +#define GPEP0_TIMEOUT_ENABLE 0 + u32 isodelay; +#define ISOCHRONOUS_DELAY 0 +} __packed; + +struct usb338x_fifo_regs { + /* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */ + u32 ep_fifo_size_base; +#define IN_FIFO_BASE_ADDRESS 22 +#define IN_FIFO_SIZE 16 +#define OUT_FIFO_BASE_ADDRESS 6 +#define OUT_FIFO_SIZE 0 + u32 ep_fifo_out_wrptr; + u32 ep_fifo_out_rdptr; + u32 ep_fifo_in_wrptr; + u32 ep_fifo_in_rdptr; + u32 unused[3]; +} __packed; + + +/* Link layer */ +struct usb338x_ll_regs { + /* offset 0x700 */ + u32 ll_ltssm_ctrl1; + u32 ll_ltssm_ctrl2; + u32 ll_ltssm_ctrl3; + u32 unused[2]; + u32 ll_general_ctrl0; + u32 ll_general_ctrl1; +#define PM_U3_AUTO_EXIT 29 +#define PM_U2_AUTO_EXIT 28 +#define PM_U1_AUTO_EXIT 27 +#define PM_FORCE_U2_ENTRY 26 +#define PM_FORCE_U1_ENTRY 25 +#define PM_LGO_COLLISION_SEND_LAU 24 +#define PM_DIR_LINK_REJECT 23 +#define PM_FORCE_LINK_ACCEPT 22 +#define PM_DIR_ENTRY_U3 20 +#define PM_DIR_ENTRY_U2 19 +#define PM_DIR_ENTRY_U1 18 +#define PM_U2_ENABLE 17 +#define PM_U1_ENABLE 16 +#define SKP_THRESHOLD_ADJUST_FMW 8 +#define RESEND_DPP_ON_LRTY_FMW 7 +#define DL_BIT_VALUE_FMW 6 +#define FORCE_DL_BIT 5 + u32 ll_general_ctrl2; +#define SELECT_INVERT_LANE_POLARITY 7 +#define FORCE_INVERT_LANE_POLARITY 6 + u32 ll_general_ctrl3; + u32 ll_general_ctrl4; + u32 ll_error_gen; +} __packed; + +struct usb338x_ll_lfps_regs { + /* offset 0x748 */ + u32 ll_lfps_5; +#define TIMER_LFPS_6US 16 + u32 ll_lfps_6; +#define TIMER_LFPS_80US 0 +} __packed; + +struct usb338x_ll_tsn_regs { + /* offset 0x77C */ + u32 ll_tsn_counters_2; +#define HOT_TX_NORESET_TS2 24 + u32 ll_tsn_counters_3; +#define HOT_RX_RESET_TS2 0 +} __packed; + +struct usb338x_ll_chi_regs { + /* offset 0x79C */ + u32 ll_tsn_chicken_bit; +#define RECOVERY_IDLE_TO_RECOVER_FMW 3 +} __packed; + +/* protocol layer */ +struct usb338x_pl_regs { + /* offset 0x800 */ + u32 pl_reg_1; + u32 pl_reg_2; + u32 pl_reg_3; + u32 pl_reg_4; + u32 pl_ep_ctrl; + /* Protocol Layer Endpoint Control*/ +#define PL_EP_CTRL 0x810 +#define ENDPOINT_SELECT 0 + /* [4:0] */ +#define EP_INITIALIZED 16 +#define SEQUENCE_NUMBER_RESET 17 +#define CLEAR_ACK_ERROR_CODE 20 + u32 pl_reg_6; + u32 pl_reg_7; + u32 pl_reg_8; + u32 pl_ep_status_1; + /* Protocol Layer Endpoint Status 1*/ +#define PL_EP_STATUS_1 0x820 +#define STATE 16 +#define ACK_GOOD_NORMAL 0x11 +#define ACK_GOOD_MORE_ACKS_TO_COME 0x16 + u32 pl_ep_status_2; + u32 pl_ep_status_3; + /* Protocol Layer Endpoint Status 3*/ +#define PL_EP_STATUS_3 0x828 +#define SEQUENCE_NUMBER 0 + u32 pl_ep_status_4; + /* Protocol Layer Endpoint Status 4*/ +#define PL_EP_STATUS_4 0x82c + u32 pl_ep_cfg_4; + /* Protocol Layer Endpoint Configuration 4*/ +#define PL_EP_CFG_4 0x830 +#define NON_CTRL_IN_TOLERATE_BAD_DIR 6 +} __packed; + +#endif /* __LINUX_USB_USB338X_H */ From d1b781002b31247d38a2892c51b88348d6a8f201 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 19 May 2014 13:55:25 +0200 Subject: [PATCH 266/314] USB: cdc-acm: use BIT macro Converting the header to BIT for readability. No functional change. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 80826f843e04..fc75651afe1c 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -126,9 +126,9 @@ struct acm { #define CDC_DATA_INTERFACE_TYPE 0x0a /* constants describing various quirks and errors */ -#define NO_UNION_NORMAL 1 -#define SINGLE_RX_URB 2 -#define NO_CAP_LINE 4 -#define NOT_A_MODEM 8 -#define NO_DATA_INTERFACE 16 -#define IGNORE_DEVICE 32 +#define NO_UNION_NORMAL BIT(0) +#define SINGLE_RX_URB BIT(1) +#define NO_CAP_LINE BIT(2) +#define NOT_A_MODEM BIT(3) +#define NO_DATA_INTERFACE BIT(4) +#define IGNORE_DEVICE BIT(5) From d846b7650db3fcca7901b6e23f6416c3601a3dfe Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 19 May 2014 13:54:57 +0200 Subject: [PATCH 267/314] USB: usbtmc: fix DMA on stack send_request_dev_dep_msg_in() use a buffer allocated on the stack. Fix by kmalloc()ing the buffer. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index cfbec9c7e09e..103a6e9ee49d 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -383,9 +383,12 @@ exit: static int send_request_dev_dep_msg_in(struct usbtmc_device_data *data, size_t transfer_size) { int retval; - u8 buffer[USBTMC_HEADER_SIZE]; + u8 *buffer; int actual; + buffer = kmalloc(USBTMC_HEADER_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; /* Setup IO buffer for REQUEST_DEV_DEP_MSG_IN message * Refer to class specs for details */ @@ -417,6 +420,7 @@ static int send_request_dev_dep_msg_in(struct usbtmc_device_data *data, size_t t if (!data->bTag) data->bTag++; + kfree(buffer); if (retval < 0) { dev_err(&data->intf->dev, "usb_bulk_msg in send_request_dev_dep_msg_in() returned %d\n", retval); return retval; From 552e1f2679b7b766b8b8de3dc6d83d9cd28f28b2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 19 May 2014 13:53:55 +0200 Subject: [PATCH 268/314] USB: appledisplay: fix race between reading and writing from the device The workqueue handler may call appledisplay_bl_get_brightness() while user space calls appledisplay_bl_update_status(). As they share a buffer that must not happen. Use a mutex for mutual exclusion. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index f37c78d1bdf4..b3d245ef46ef 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -81,6 +81,7 @@ struct appledisplay { struct delayed_work work; int button_pressed; spinlock_t lock; + struct mutex sysfslock; /* concurrent read and write */ }; static atomic_t count_displays = ATOMIC_INIT(0); @@ -144,6 +145,7 @@ static int appledisplay_bl_update_status(struct backlight_device *bd) struct appledisplay *pdata = bl_get_data(bd); int retval; + mutex_lock(&pdata->sysfslock); pdata->msgdata[0] = 0x10; pdata->msgdata[1] = bd->props.brightness; @@ -156,15 +158,17 @@ static int appledisplay_bl_update_status(struct backlight_device *bd) 0, pdata->msgdata, 2, ACD_USB_TIMEOUT); - + mutex_unlock(&pdata->sysfslock); + return retval; } static int appledisplay_bl_get_brightness(struct backlight_device *bd) { struct appledisplay *pdata = bl_get_data(bd); - int retval; + int retval, brightness; + mutex_lock(&pdata->sysfslock); retval = usb_control_msg( pdata->udev, usb_rcvctrlpipe(pdata->udev, 0), @@ -174,11 +178,13 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) 0, pdata->msgdata, 2, ACD_USB_TIMEOUT); + brightness = pdata->msgdata[1]; + mutex_unlock(&pdata->sysfslock); if (retval < 0) return retval; else - return pdata->msgdata[1]; + return brightness; } static const struct backlight_ops appledisplay_bl_data = { @@ -241,6 +247,7 @@ static int appledisplay_probe(struct usb_interface *iface, spin_lock_init(&pdata->lock); INIT_DELAYED_WORK(&pdata->work, appledisplay_work); + mutex_init(&pdata->sysfslock); /* Allocate buffer for control messages */ pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL); From c78d1ecfd7e639f21c7a809f4df6de1a644a91f0 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 19 May 2014 13:52:20 +0200 Subject: [PATCH 269/314] USB: yurex: fix race between probe() and read() There's a window during which read() would return 0 instead of a correct error for no data yet. Reorder initialization to fix the race. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/yurex.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 24278208bf74..1472805083de 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -296,6 +296,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); + dev->bbu = -1; /* we can register the device now, as it is ready */ retval = usb_register_dev(interface, &yurex_class); @@ -306,8 +307,6 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ goto error; } - dev->bbu = -1; - dev_info(&interface->dev, "USB YUREX device now attached to Yurex #%d\n", interface->minor); From 737583f07e6267c60847e6c9a75e651277c08828 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 19 May 2014 13:50:22 +0200 Subject: [PATCH 270/314] USB: udl: proper error reporting Parsing device descriptors can fail due to a failed memory allocation. The error needs to be properly propagated to the upper layers. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/udl/udl_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index f5ae57406f34..afdf383f630a 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -283,7 +283,7 @@ int udl_submit_urb(struct drm_device *dev, struct urb *urb, size_t len) int udl_driver_load(struct drm_device *dev, unsigned long flags) { struct udl_device *udl; - int ret; + int ret = -ENOMEM; DRM_DEBUG("\n"); udl = kzalloc(sizeof(struct udl_device), GFP_KERNEL); @@ -299,7 +299,6 @@ int udl_driver_load(struct drm_device *dev, unsigned long flags) } if (!udl_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) { - ret = -ENOMEM; DRM_ERROR("udl_alloc_urb_list failed\n"); goto err; } From 3a0d89d3f80df15fee3802e030d51f1848269a01 Mon Sep 17 00:00:00 2001 From: Naoki MATSUMOTO Date: Thu, 15 May 2014 20:17:44 +0900 Subject: [PATCH 271/314] USB: delete CONFIG_USB_DEVICEFS from defconfig It no longer occurs in Kconfig. USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig. Signed-off-by: Naoki MATSUMOTO Signed-off-by: Greg Kroah-Hartman --- arch/arm/configs/badge4_defconfig | 1 - arch/arm/configs/cm_x2xx_defconfig | 1 - arch/arm/configs/cm_x300_defconfig | 1 - arch/arm/configs/colibri_pxa270_defconfig | 1 - arch/arm/configs/colibri_pxa300_defconfig | 1 - arch/arm/configs/corgi_defconfig | 1 - arch/arm/configs/davinci_all_defconfig | 1 - arch/arm/configs/em_x270_defconfig | 1 - arch/arm/configs/footbridge_defconfig | 1 - arch/arm/configs/ixp4xx_defconfig | 1 - arch/arm/configs/kzm9g_defconfig | 1 - arch/arm/configs/mini2440_defconfig | 1 - arch/arm/configs/mv78xx0_defconfig | 1 - arch/arm/configs/neponset_defconfig | 1 - arch/arm/configs/omap1_defconfig | 1 - arch/arm/configs/pcm027_defconfig | 1 - arch/arm/configs/s3c2410_defconfig | 1 - arch/arm/configs/s3c6400_defconfig | 1 - arch/arm/configs/spitz_defconfig | 1 - arch/arm/configs/trizeps4_defconfig | 1 - arch/arm/configs/viper_defconfig | 1 - arch/arm/configs/zeus_defconfig | 1 - arch/avr32/configs/hammerhead_defconfig | 1 - arch/blackfin/configs/BF526-EZBRD_defconfig | 1 - arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 1 - arch/blackfin/configs/BF527-EZKIT_defconfig | 1 - arch/blackfin/configs/BF548-EZKIT_defconfig | 1 - arch/blackfin/configs/CM-BF527_defconfig | 1 - arch/blackfin/configs/CM-BF548_defconfig | 1 - arch/blackfin/configs/IP0X_defconfig | 1 - arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/generic_defconfig | 1 - arch/ia64/configs/gensparse_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/mips/configs/fuloong2e_defconfig | 1 - arch/mips/configs/lemote2f_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - arch/mips/configs/sb1250_swarm_defconfig | 1 - arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/parisc/configs/c3000_defconfig | 1 - arch/parisc/configs/default_defconfig | 1 - arch/powerpc/configs/40x/ep405_defconfig | 1 - arch/powerpc/configs/44x/canyonlands_defconfig | 1 - arch/powerpc/configs/44x/sam440ep_defconfig | 1 - arch/powerpc/configs/52xx/cm5200_defconfig | 1 - arch/powerpc/configs/52xx/pcm030_defconfig | 1 - arch/powerpc/configs/52xx/tqm5200_defconfig | 1 - arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 1 - arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 1 - arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 1 - arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 1 - arch/powerpc/configs/83xx/sbc834x_defconfig | 1 - arch/powerpc/configs/85xx/ge_imp3a_defconfig | 1 - arch/powerpc/configs/85xx/socrates_defconfig | 1 - arch/powerpc/configs/85xx/xes_mpc85xx_defconfig | 1 - arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 1 - arch/powerpc/configs/amigaone_defconfig | 1 - arch/powerpc/configs/c2k_defconfig | 1 - arch/powerpc/configs/cell_defconfig | 1 - arch/powerpc/configs/celleb_defconfig | 1 - arch/powerpc/configs/chrp32_defconfig | 1 - arch/powerpc/configs/g5_defconfig | 1 - arch/powerpc/configs/linkstation_defconfig | 1 - arch/powerpc/configs/maple_defconfig | 1 - arch/powerpc/configs/mpc5200_defconfig | 1 - arch/powerpc/configs/mpc86xx_defconfig | 1 - arch/powerpc/configs/pmac32_defconfig | 1 - arch/powerpc/configs/ppc6xx_defconfig | 1 - arch/powerpc/configs/storcenter_defconfig | 1 - arch/sh/configs/ecovec24_defconfig | 1 - arch/sh/configs/landisk_defconfig | 1 - arch/sh/configs/rsk7203_defconfig | 1 - arch/sh/configs/sdk7780_defconfig | 1 - arch/sh/configs/se7343_defconfig | 1 - arch/sh/configs/se7780_defconfig | 1 - arch/sh/configs/sh2007_defconfig | 1 - arch/sh/configs/sh7785lcr_defconfig | 1 - arch/sh/configs/titan_defconfig | 1 - arch/sh/configs/urquell_defconfig | 1 - arch/unicore32/configs/unicore32_defconfig | 1 - 84 files changed, 84 deletions(-) diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5b54abbeb0b3..60b0b9368b1b 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -74,7 +74,6 @@ CONFIG_SOUND=y CONFIG_SOUND_PRIME=y CONFIG_USB=y CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index a93ff8da5bab..dc01c049a520 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index f4b767256f95..7df040e91c1c 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -129,7 +129,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 2ef2c5e8aaec..18c311ae1113 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -124,7 +124,6 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_SERIAL=m CONFIG_USB_GADGET=m diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index b985334e42dd..2641dd6ed2f5 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -49,7 +49,6 @@ CONFIG_LOGO=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 1fd1d1de3220..c1470a00f55a 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -172,7 +172,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 2a282c051cfd..5089ced52c9c 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,7 +157,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_PERIPHERAL=y diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 60a21e01eb70..4560c9ca6636 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 038518ab39a8..17bb3f7b5802 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -101,7 +101,6 @@ CONFIG_SOUND=m # CONFIG_USB_HID is not set CONFIG_USB=m CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_PRINTER=m CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 063e2ab2c8f1..1af665e847d1 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -169,7 +169,6 @@ CONFIG_SENSORS_W83781D=y CONFIG_WATCHDOG=y CONFIG_IXP4XX_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 12bd1f63c399..bd097d455f87 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -106,7 +106,6 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index a07948a87caa..9c93f5655248 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -217,7 +217,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 1f08219c1b3c..0dae1c1f007a 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -80,7 +80,6 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index d7dc9922cfff..63aa319b44bb 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -69,7 +69,6 @@ CONFIG_SOUND_PRIME=y # CONFIG_USB_HID is not set CONFIG_USB=m CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index d74edbad18fc..0f258d555fbc 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -198,7 +198,6 @@ CONFIG_SND_OMAP_SOC=y CONFIG_USB=y CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 2f136c30a989..0a847d04ddc1 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -76,7 +76,6 @@ CONFIG_SND_PCM_OSS=y CONFIG_SND_PXA2XX_AC97=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 193448f31284..eb4d204bff47 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -324,7 +324,6 @@ CONFIG_SND_USB_CAIAQ=m CONFIG_SND_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 3a186d653dac..e2f9fa5bb54b 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -56,7 +56,6 @@ CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 2e0419d1b964..a1ede1966baf 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -166,7 +166,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_SL811_HCD=m diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 3162173fa75a..932ee4e4a13a 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -165,7 +165,6 @@ CONFIG_SND_PXA2XX_AC97=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index d36e0d3c86ec..0d717a5eff29 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -127,7 +127,6 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PXA2XX_AC97=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_ISP116X_HCD=m CONFIG_USB_SL811_HCD=m CONFIG_USB_R8A66597_HCD=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 731d4f985310..cd11da8b5123 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -132,7 +132,6 @@ CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=m diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 18db853386c8..4912f0aadaa1 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -117,7 +117,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_ISP116X_HCD=m diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 2f2c6acf210c..1759fad54017 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -123,7 +123,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index 91535c38e7f2..357729682c00 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -147,7 +147,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index af2738c7441b..2e73a5d33da8 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -141,7 +141,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index e716fdfd2cf2..f0a2ddf5de46 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -159,7 +159,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index f59c80ee78e3..05108b85ab12 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -95,7 +95,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=m diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index b9af4fa69984..9ff79df6825c 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -94,7 +94,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 629516578760..5adf0da58499 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -73,7 +73,6 @@ CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_ISP1362_HCD=y diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index cf5993f05d4f..4c4ac163c600 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -75,7 +75,6 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_CS4281=m CONFIG_USB_HIDDEV=y CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_UHCI_HCD=m CONFIG_USB_ACM=m diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index b4efaf2bc13e..e8ed3ae70aae 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -143,7 +143,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index f64980dd20c3..d663efd1e4db 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -126,7 +126,6 @@ CONFIG_SND_CS46XX=m CONFIG_SND_EMU10K1=m CONFIG_SND_FM801=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 0fed9ae5a42a..c8a3f40e77f6 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -102,7 +102,6 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=y diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index e5b73de08fc5..002680648dcb 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -188,7 +188,6 @@ CONFIG_USB_KBD=y CONFIG_USB_MOUSE=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_WUSB_CBAF=m diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 343bebc4b63b..227a9de32246 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -297,7 +297,6 @@ CONFIG_HID_WACOM=m CONFIG_HID_ZEROPLUS=m CONFIG_ZEROPLUS_FF=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OTG_WHITELIST=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index c16de9812920..7a346605c498 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -47,7 +47,6 @@ CONFIG_GPIO_VR41XX=y # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_VR41XX=y diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index d1142e9cd9a1..201edfb2637d 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -67,7 +67,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_PMCMSP=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 593946afc483..d269a5326a30 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -575,7 +575,6 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 59d9d2fdcd48..73e7bf49461c 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -301,7 +301,6 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig index 5b0463ef9389..51bab13ef6f8 100644 --- a/arch/mips/configs/sb1250_swarm_defconfig +++ b/arch/mips/configs/sb1250_swarm_defconfig @@ -72,7 +72,6 @@ CONFIG_SERIO_RAW=m # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_EXT2_FS=y diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 30036b4cbeb1..11f51505d562 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -72,7 +72,6 @@ CONFIG_GPIO_TB0219=y # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 81bfa1d4d8e3..d99b1905a1ba 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -69,7 +69,6 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_OHCI_HCD=y diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index acacd348df89..b2c3905682d9 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -128,7 +128,6 @@ CONFIG_SND_AD1889=y CONFIG_USB_HIDDEV=y CONFIG_USB=y CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig index ba61495e1fa4..4d8127e8428a 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/default_defconfig @@ -145,7 +145,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index cf06d42f2c03..e9d84b5d0ab6 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -57,7 +57,6 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_THERMAL=y CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 7b8abd1b88b0..9919a91add12 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -71,7 +71,6 @@ CONFIG_I2C_IBM_IIC=y CONFIG_SENSORS_AD7414=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index ca088cd581af..9622eb2a3e37 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -83,7 +83,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 4f84a0b2fbf3..0dc99e141035 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -64,7 +64,6 @@ CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 2401e2554329..1d03c35540c7 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -76,7 +76,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_SOC is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 21c841e0f482..ca83ec88b114 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -75,7 +75,6 @@ CONFIG_FB_FOREIGN_ENDIAN=y CONFIG_FB_SM501=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 0b73b7f9d112..4b4a2a9133a5 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -74,7 +74,6 @@ CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 97ac3b993cb6..5871395573c5 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -71,7 +71,6 @@ CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index b4da1a7e6449..5adc4cea42d3 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -61,7 +61,6 @@ CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 291f8221d5a6..82b6b6c88d6a 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -71,7 +71,6 @@ CONFIG_SPI_BITBANG=y CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index a3bcda67d2d9..4ae385894c64 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -70,7 +70,6 @@ CONFIG_I2C_MPC=y CONFIG_WATCHDOG=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig index c9765b54dd1a..dc939de9b5b0 100644 --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -158,7 +158,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index e5147488c000..435fd408eef1 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -86,7 +86,6 @@ CONFIG_FONTS=y CONFIG_FONT_8x16=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 07bb81df27e0..72df8ab8449e 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -125,7 +125,6 @@ CONFIG_SENSORS_LM90=y CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_ISP1760_HCD=y diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index f51c7ebc181e..76f43df3dec7 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -123,7 +123,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig index b6d49da9c82c..8c66b13e59fc 100644 --- a/arch/powerpc/configs/amigaone_defconfig +++ b/arch/powerpc/configs/amigaone_defconfig @@ -108,7 +108,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index c69f61620908..5e2aa43562b5 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -261,7 +261,6 @@ CONFIG_USBPCWATCHDOG=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 22a403d78d34..4bee1a6d41d0 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -179,7 +179,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HID=m # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig index 895449ed971e..6d7b22f41b50 100644 --- a/arch/powerpc/configs/celleb_defconfig +++ b/arch/powerpc/configs/celleb_defconfig @@ -87,7 +87,6 @@ CONFIG_WATCHDOG=y # CONFIG_VGA_CONSOLE is not set CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index b20554efddcc..db5b30857e1c 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -111,7 +111,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 1ea22fc24ea8..3c72fa615bd9 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -175,7 +175,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 353435256f4c..b5e684640fdf 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -111,7 +111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HID=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 2a5afac29861..95e545d9f25c 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -79,7 +79,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 8b682d1cf4d6..530601e8ccfe 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -113,7 +113,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index a1cc8179e9fd..35595ea74ff4 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -126,7 +126,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index a73626b09051..553e66278010 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -279,7 +279,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 175a8b99c196..b21156372b24 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -966,7 +966,6 @@ CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index ba39c785445d..60ad2c08caa6 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -72,7 +72,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index c6c2becdc8ab..0b364e3b0ff8 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -107,7 +107,6 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y CONFIG_SND_FSI_DA7210=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 3670e937f2b7..6783f31315c7 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -80,7 +80,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index 47236573db83..3c4f6f4d52b0 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -100,7 +100,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_R8A66597_HCD=y CONFIG_NEW_LEDS=y diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index ae1115849dda..fa37e897399b 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -101,7 +101,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index be9c474197b3..af3fe7352471 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -94,7 +94,6 @@ CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_ISP116X_HCD=y CONFIG_UIO=y CONFIG_EXT2_FS=y diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index c8c5e7f7a68d..b0ef63ce525a 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -94,7 +94,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig index 0d2f41472a19..0c08d9244c97 100644 --- a/arch/sh/configs/sh2007_defconfig +++ b/arch/sh/configs/sh2007_defconfig @@ -97,7 +97,6 @@ CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_NEW_LEDS=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 51561f5677d8..d29da4a0f6c2 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -88,7 +88,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index e2cbd92d520b..a77b778c745b 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -215,7 +215,6 @@ CONFIG_WATCHDOG=y CONFIG_SH_WDT=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index d7f89be9f474..1e843dbed5f0 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -117,7 +117,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/unicore32/configs/unicore32_defconfig b/arch/unicore32/configs/unicore32_defconfig index c9dd3198b6f7..45f47f88d86a 100644 --- a/arch/unicore32/configs/unicore32_defconfig +++ b/arch/unicore32/configs/unicore32_defconfig @@ -149,7 +149,6 @@ CONFIG_SND_PCM_OSS=m # USB support CONFIG_USB_ARCH_HAS_HCD=n CONFIG_USB=n -CONFIG_USB_DEVICEFS=n CONFIG_USB_PRINTER=n CONFIG_USB_STORAGE=n # Inventra Highspeed Dual Role Controller From 0a939993bff117d3657108ca13b011fc0378aedb Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Tue, 20 May 2014 14:00:42 +0300 Subject: [PATCH 272/314] xhci: Switch only Intel Lynx Point-LP ports to EHCI on shutdown. Patch "xhci: Switch Intel Lynx Point ports to EHCI on shutdown." commit c09ec25d3684cad74d851c0f028a495999591279 is not fully correct It switches both Lynx Point and Lynx Point-LP ports to EHCI on shutdown. On some Lynx Point machines it causes spurious interrupt, which wake the system: bugzilla.kernel.org/show_bug.cgi?id=76291 On Lynx Point-LP on the contrary switching ports to EHCI seems to be necessary to fix these spurious interrupts. Signed-off-by: Denis Turischev Reported-by: Wulf Richartz Cc: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ffd119eb3e29..e20520f42753 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -134,7 +134,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) xhci->quirks |= XHCI_SPURIOUS_WAKEUP; - + } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && From 6fecd4f2a58c60028b1a75deefcf111516d3f836 Mon Sep 17 00:00:00 2001 From: Todd E Brandt Date: Mon, 19 May 2014 10:55:32 -0700 Subject: [PATCH 273/314] USB: separate usb_address0 mutexes for each bus This patch creates a separate instance of the usb_address0 mutex for each USB bus, and attaches it to the usb_bus device struct. This allows devices on separate buses to be enumerated in parallel; saving time. In the current code, there is a single, global instance of the usb_address0 mutex which is used for all devices on all buses. This isn't completely necessary, as this mutex is only needed to prevent address0 collisions for devices on the *same* bus (usb 2.0 spec, sec 4.6.1). This superfluous coverage can cause additional delay in system resume on systems with multiple hosts (up to several seconds depending on what devices are attached). Signed-off-by: Todd Brandt Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 1 + drivers/usb/core/hub.c | 6 ++---- include/linux/usb.h | 2 ++ 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index adddc66c9e8d..174eb857a6b4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -918,6 +918,7 @@ static void usb_bus_init (struct usb_bus *bus) bus->bandwidth_allocated = 0; bus->bandwidth_int_reqs = 0; bus->bandwidth_isoc_reqs = 0; + mutex_init(&bus->usb_address0_mutex); INIT_LIST_HEAD (&bus->bus_list); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 090469ebfcff..726fa072c3fe 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4016,8 +4016,6 @@ static int hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, int retry_counter) { - static DEFINE_MUTEX(usb_address0_mutex); - struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); int i, j, retval; @@ -4040,7 +4038,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (oldspeed == USB_SPEED_LOW) delay = HUB_LONG_RESET_TIME; - mutex_lock(&usb_address0_mutex); + mutex_lock(&hdev->bus->usb_address0_mutex); /* Reset the device; full speed may morph to high speed */ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ @@ -4317,7 +4315,7 @@ fail: hub_port_disable(hub, port1, 0); update_devnum(udev, devnum); /* for disconnect processing */ } - mutex_unlock(&usb_address0_mutex); + mutex_unlock(&hdev->bus->usb_address0_mutex); return retval; } diff --git a/include/linux/usb.h b/include/linux/usb.h index 6b7ec376fb4d..d2465bc0e73c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -352,6 +352,8 @@ struct usb_bus { struct usb_bus *hs_companion; /* Companion EHCI bus, if any */ struct list_head bus_list; /* list of busses */ + struct mutex usb_address0_mutex; /* unaddressed device mutex */ + int bandwidth_allocated; /* on this bus: how much of the time * reserved for periodic (intr/iso) * requests is used, on average? From 657d898a9320a7cdb9b94565d75ecf75c25cbf0a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 22 May 2014 13:21:38 +0200 Subject: [PATCH 274/314] usb: usb5303: add support for reference clock specified in device tree USB3503 chip supports 8 values of reference clock. The value is specified by REF_SEL[1:0] pins and INT_N line. This patch add support for getting 'refclk' clock, enabling it and setting INT_N line according to the value of the gathered clock. If no clock has been specified, driver defaults to the old behaviour (assuming that clock has been specified by REF_SEL pins from primary reference clock frequencies table). Signed-off-by: Marek Szyprowski Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/usb3503.txt | 8 +++ drivers/usb/misc/usb3503.c | 59 ++++++++++++++++++- 2 files changed, 65 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index a018da4a7ad7..221ac0dbc678 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -15,6 +15,14 @@ Optional properties: - reset-gpios: Should specify GPIO for reset. - initial-mode: Should specify initial mode. (1 for HUB mode, 2 for STANDBY mode) +- refclk: Clock used for driving REFCLK signal (optional, if not provided + the driver assumes that clock signal is always available, its + rate is specified by REF_SEL pins and a value from the primary + reference clock frequencies table is used) +- refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL + pins (optional, if not provided, driver will not set rate of the + REFCLK signal and assume that a value from the primary reference + clock frequencies table is used) Examples: usb3503@08 { diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index a31641e18d19..f43c61989cef 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -18,6 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -57,10 +58,12 @@ struct usb3503 { enum usb3503_mode mode; struct regmap *regmap; struct device *dev; + struct clk *clk; u8 port_off_mask; int gpio_intn; int gpio_reset; int gpio_connect; + bool secondary_ref_clk; }; static int usb3503_reset(struct usb3503 *hub, int state) @@ -184,8 +187,58 @@ static int usb3503_probe(struct usb3503 *hub) hub->gpio_reset = pdata->gpio_reset; hub->mode = pdata->initial_mode; } else if (np) { + struct clk *clk; hub->port_off_mask = 0; + clk = devm_clk_get(dev, "refclk"); + if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) { + dev_err(dev, "unable to request refclk (%d)\n", err); + return PTR_ERR(clk); + } + + if (!IS_ERR(clk)) { + u32 rate = 0; + hub->clk = clk; + + if (!of_property_read_u32(np, "refclk-frequency", + &rate)) { + + switch (rate) { + case 38400000: + case 26000000: + case 19200000: + case 12000000: + hub->secondary_ref_clk = 0; + break; + case 24000000: + case 27000000: + case 25000000: + case 50000000: + hub->secondary_ref_clk = 1; + break; + default: + dev_err(dev, + "unsupported reference clock rate (%d)\n", + (int) rate); + return -EINVAL; + } + err = clk_set_rate(hub->clk, rate); + if (err) { + dev_err(dev, + "unable to set reference clock rate to %d\n", + (int) rate); + return err; + } + } + + err = clk_prepare_enable(hub->clk); + if (err) { + dev_err(dev, + "unable to enable reference clock\n"); + return err; + } + } + property = of_get_property(np, "disabled-ports", &len); if (property && (len / sizeof(u32)) > 0) { int i; @@ -213,8 +266,10 @@ static int usb3503_probe(struct usb3503 *hub) dev_err(dev, "Ports disabled with no control interface\n"); if (gpio_is_valid(hub->gpio_intn)) { - err = devm_gpio_request_one(dev, hub->gpio_intn, - GPIOF_OUT_INIT_HIGH, "usb3503 intn"); + int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW : + GPIOF_OUT_INIT_HIGH; + err = devm_gpio_request_one(dev, hub->gpio_intn, val, + "usb3503 intn"); if (err) { dev_err(dev, "unable to request GPIO %d as connect pin (%d)\n", From e4d58f5dcb7d7be45df8def31881ebfae99c75da Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Mon, 26 May 2014 10:55:36 +0800 Subject: [PATCH 275/314] usb: usbtest: fix unlink write error with pattern 1 TEST 12 and TEST 24 unlinks the URB write request for N times. When host and gadget both initialize pattern 1 (mod 63) data series to transfer, the gadget side will complain the wrong data which is not expected. Because in host side, usbtest doesn't fill the data buffer as mod 63 and this patch fixed it. [20285.488974] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.489181] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.489423] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb50800 length 512 last [20285.489727] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.490055] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.490281] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.490492] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Active [20285.490713] dwc3 dwc3.0.auto: ep1out-bulk: endpoint busy [20285.490909] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Complete [20285.491117] dwc3 dwc3.0.auto: request ffff8800aa6cb480 from ep1out-bulk completed 512/512 ===> 0 [20285.491431] zero gadget: bad OUT byte, buf[1] = 0 [20285.491605] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Set Stall' params 00000000 00000000 00000000 [20285.491915] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.492099] dwc3 dwc3.0.auto: queing request ffff8800aa6cb480 to ep1out-bulk length 512 [20285.492387] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.492595] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.492830] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb51000 length 512 last [20285.493135] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.493465] dwc3 dwc3.0.auto: Command Complete --> 0 Cc: Signed-off-by: Huang Rui Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index f6568b5e9b06..4ed457edde23 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1320,6 +1320,11 @@ static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async) urb->context = &completion; urb->complete = unlink1_callback; + if (usb_pipeout(urb->pipe)) { + simple_fill_buf(urb); + urb->transfer_flags |= URB_ZERO_PACKET; + } + /* keep the endpoint busy. there are lots of hc/hcd-internal * states, and testing should get to all of them over time. * @@ -1450,6 +1455,11 @@ static int unlink_queued(struct usbtest_dev *dev, int pipe, unsigned num, unlink_queued_callback, &ctx); ctx.urbs[i]->transfer_dma = buf_dma; ctx.urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + + if (usb_pipeout(ctx.urbs[i]->pipe)) { + simple_fill_buf(ctx.urbs[i]); + ctx.urbs[i]->transfer_flags |= URB_ZERO_PACKET; + } } /* Submit all the URBs and then unlink URBs num - 4 and num - 2. */ From a7683eb3af6df30e3a3f3666d834e9abba8f5c22 Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Thu, 22 May 2014 18:06:14 +0800 Subject: [PATCH 276/314] usb: usbtest: add pattern check on pipe in phase of unlink read TEST 11 unlinks the URB read request for N times. When host and gadget both initialize pattern 1 (mod 63) data series to do IN transfer, the host side function should check the data buffer if it is as mod 63 series, because the data packet which host receivced will follow pattern 1. So this patch adds this checking action. Signed-off-by: Huang Rui Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 4ed457edde23..51a6da256772 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1345,6 +1345,9 @@ static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async) while (!completion_done(&completion)) { retval = usb_unlink_urb(urb); + if (retval == 0 && usb_pipein(urb->pipe)) + retval = simple_check_buf(dev, urb); + switch (retval) { case -EBUSY: case -EIDRM: From a328512d3cb9e7b5d998eeb2675216edf4407f77 Mon Sep 17 00:00:00 2001 From: Benoit Taine Date: Mon, 26 May 2014 17:21:10 +0200 Subject: [PATCH 277/314] USB: storage: ene_ub6250: Use kmemdup instead of kmalloc + memcpy This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by: Benoit Taine Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/ene_ub6250.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 1bfc9a6cab5f..ef6efb55dc31 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1928,11 +1928,10 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) usb_stor_dbg(us, "load firmware %s failed\n", fw_name); goto nofw; } - buf = kmalloc(sd_fw->size, GFP_KERNEL); + buf = kmemdup(sd_fw->data, sd_fw->size, GFP_KERNEL); if (buf == NULL) goto nofw; - memcpy(buf, sd_fw->data, sd_fw->size); memset(bcb, 0, sizeof(struct bulk_cb_wrap)); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); bcb->DataTransferLength = sd_fw->size; From d30f2065d6da377cc76771aca5a9850cfca8723b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 26 May 2014 23:37:09 +0200 Subject: [PATCH 278/314] usb: gadget: rename CONFIG_USB_GADGET_PXA25X Commit 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built") basically renamed the Kconfig symbol USB_GADGET_PXA25X to USB_PXA25X. It did not rename the related macros in use at that time. Commit c0a39151a405 ("ARM: pxa: fix inconsistent CONFIG_USB_PXA27X") did so for all but one macro. Rename that last macro too now. Fixes: 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built") Signed-off-by: Paul Bolle Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 5b840fb0cce5..ee6c16416c30 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1502,7 +1502,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) } break; -#ifndef CONFIG_USB_GADGET_PXA25X +#ifndef CONFIG_USB_PXA25X /* PXA automagically handles this request too */ case USB_REQ_GET_CONFIGURATION: if (ctrl->bRequestType != 0x80) From 342a74934197386e065e8ef00014e6f0cb5effe6 Mon Sep 17 00:00:00 2001 From: Konrad Zapalowicz Date: Tue, 27 May 2014 23:09:14 +0200 Subject: [PATCH 279/314] usb: pci_quirks: fix sparse 'symbol not declared' warning This commit fixes the following sparse warning: drivers/usb/host/pci-quirks.c: - 252: warning: symbol 'usb_hcd_amd_remote_wakeup_quirk' was not declared. Should it be static? This function is exported so the fix was to add it's declaration to the header file. Signed-off-by: Konrad Zapalowicz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 638e88f7a28b..c622ddf21c94 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -5,6 +5,7 @@ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); int usb_amd_find_chipset_info(void); +int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); bool usb_amd_hang_symptom_quirk(void); bool usb_amd_prefetch_quirk(void); void usb_amd_dev_put(void); From 600856c231ccb0cbf8afcf09066a8ab2a93ab03d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2014 18:08:07 -0700 Subject: [PATCH 280/314] USB: mutual exclusion for resetting a hub and power-managing a port The USB core doesn't properly handle mutual exclusion between resetting a hub and changing the power states of the hub's ports. We need to avoid sending port-power requests to the hub while it is being reset, because such requests cannot succeed. This patch fixes the problem by keeping track of when a reset is in progress. At such times, attempts to suspend (power-off) a port will fail immediately with -EBUSY, and calls to usb_port_runtime_resume() will update the power_is_on flag and return immediately. When the reset is complete, hub_activate() will automatically restore each port to the proper power state. Signed-off-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 12 ++++++++++++ drivers/usb/core/hub.h | 1 + drivers/usb/core/port.c | 6 ++++++ 3 files changed, 19 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 726fa072c3fe..5f43c22ba787 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1276,12 +1276,22 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) flush_work(&hub->tt.clear_work); } +static void hub_pm_barrier_for_all_ports(struct usb_hub *hub) +{ + int i; + + for (i = 0; i < hub->hdev->maxchild; ++i) + pm_runtime_barrier(&hub->ports[i]->dev); +} + /* caller has locked the hub device */ static int hub_pre_reset(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata(intf); hub_quiesce(hub, HUB_PRE_RESET); + hub->in_reset = 1; + hub_pm_barrier_for_all_ports(hub); return 0; } @@ -1290,6 +1300,8 @@ static int hub_post_reset(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata(intf); + hub->in_reset = 0; + hub_pm_barrier_for_all_ports(hub); hub_activate(hub, HUB_POST_RESET); return 0; } diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 33bcb2c6f90a..f9b521e60128 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -66,6 +66,7 @@ struct usb_hub { unsigned limited_power:1; unsigned quiescing:1; unsigned disconnected:1; + unsigned in_reset:1; unsigned quirk_check_port_auto_suspend:1; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 51542f852393..37647e080599 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -81,6 +81,10 @@ static int usb_port_runtime_resume(struct device *dev) if (!hub) return -EINVAL; + if (hub->in_reset) { + port_dev->power_is_on = 1; + return 0; + } usb_autopm_get_interface(intf); set_bit(port1, hub->busy_bits); @@ -117,6 +121,8 @@ static int usb_port_runtime_suspend(struct device *dev) if (!hub) return -EINVAL; + if (hub->in_reset) + return -EBUSY; if (dev_pm_qos_flags(&port_dev->dev, PM_QOS_FLAG_NO_POWER_OFF) == PM_QOS_FLAGS_ALL) From 9262c19d14c433a6a1ba25c3ff897cb89e412309 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:12 -0700 Subject: [PATCH 281/314] usb: disable port power control if not supported in wHubCharacteristics A hub indicates whether it supports per-port power control via the wHubCharacteristics field in its descriptor. If it is not supported a hub will still emulate ClearPortPower(PORT_POWER) requests by stopping the link state machine. However, since this does not save power do not bother suspending. This also consolidates support checks into a hub_is_port_power_switchable() helper. Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 ++------ drivers/usb/core/hub.h | 10 ++++++++++ drivers/usb/core/port.c | 13 ++++++++----- 3 files changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5f43c22ba787..77b91888abef 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -818,8 +818,6 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay) int port1; unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; unsigned delay; - u16 wHubCharacteristics = - le16_to_cpu(hub->descriptor->wHubCharacteristics); /* Enable power on each port. Some hubs have reserved values * of LPSM (> 2) in their descriptors, even though they are @@ -827,7 +825,7 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay) * but only emulate it. In all cases, the ports won't work * unless we send these messages to the hub. */ - if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) + if (hub_is_port_power_switchable(hub)) dev_dbg(hub->intfdev, "enabling power on all ports\n"); else dev_dbg(hub->intfdev, "trying to enable port power on " @@ -4417,8 +4415,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, struct usb_device *hdev = hub->hdev; struct device *hub_dev = hub->intfdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - unsigned wHubCharacteristics = - le16_to_cpu(hub->descriptor->wHubCharacteristics); struct usb_device *udev; int status, i; unsigned unit_load; @@ -4503,7 +4499,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, test_bit(port1, hub->removed_bits)) { /* maybe switch power back on (e.g. root hub was reset) */ - if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 + if (hub_is_port_power_switchable(hub) && !port_is_power_on(hub, portstatus)) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index f9b521e60128..4bd72dd303d5 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -112,6 +112,16 @@ extern int hub_port_debounce(struct usb_hub *hub, int port1, extern int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature); +static inline bool hub_is_port_power_switchable(struct usb_hub *hub) +{ + __le16 hcs; + + if (!hub) + return false; + hcs = hub->descriptor->wHubCharacteristics; + return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM; +} + static inline int hub_port_debounce_be_connected(struct usb_hub *hub, int port1) { diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 37647e080599..168fa6ee3348 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -177,12 +177,15 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) pm_runtime_set_active(&port_dev->dev); - /* It would be dangerous if user space couldn't - * prevent usb device from being powered off. So don't - * enable port runtime pm if failed to expose port's pm qos. + /* + * Do not enable port runtime pm if the hub does not support + * power switching. Also, userspace must have final say of + * whether a port is permitted to power-off. Do not enable + * runtime pm if we fail to expose pm_qos_no_power_off. */ - if (!dev_pm_qos_expose_flags(&port_dev->dev, - PM_QOS_FLAG_NO_POWER_OFF)) + if (hub_is_port_power_switchable(hub) + && dev_pm_qos_expose_flags(&port_dev->dev, + PM_QOS_FLAG_NO_POWER_OFF) == 0) pm_runtime_enable(&port_dev->dev); device_enable_async_suspend(&port_dev->dev); From d99f6b41308779244662109a9c2bad09a82e8ac6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:17 -0700 Subject: [PATCH 282/314] usb: rename usb_port device objects The current port name "portX" is ambiguous. Before adding more port messages rename ports to "-portX" This is an ABI change, but the suspicion is that it will go unnoticed as the port power control implementation has been broken since its introduction. If however, someone was relying on the old name we can add sysfs links from the old name to the new name. Additionally, it unifies/simplifies port dev_printk messages and modifies instances of: dev_XXX(hub->intfdev, ..."port %d"... dev_XXX(&hdev->dev, ..."port%d"... into: dev_XXX(&port_dev->dev, ... Now that the names are unique usb_port devices it would be nice if they could be included in /sys/bus/usb. However, it turns out that this breaks 'lsusb -t'. For now, create a dummy port driver so that print messages are prefixed "usb 1-1-port3" rather than the subsystem-ambiguous " 1-1-port3". Finally, it corrects an odd usage of sscanf("port%d") in usb-acpi.c. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 273 +++++++++++++++--------------------- drivers/usb/core/port.c | 10 +- drivers/usb/core/usb-acpi.c | 60 ++++---- drivers/usb/core/usb.h | 4 - 4 files changed, 158 insertions(+), 189 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 77b91888abef..653f80c52486 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -412,30 +412,35 @@ static int set_port_feature(struct usb_device *hdev, int port1, int feature) NULL, 0, 1000); } +static char *to_led_name(int selector) +{ + switch (selector) { + case HUB_LED_AMBER: + return "amber"; + case HUB_LED_GREEN: + return "green"; + case HUB_LED_OFF: + return "off"; + case HUB_LED_AUTO: + return "auto"; + default: + return "??"; + } +} + /* * USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7 * for info about using port indicators */ -static void set_port_led( - struct usb_hub *hub, - int port1, - int selector -) +static void set_port_led(struct usb_hub *hub, int port1, int selector) { - int status = set_port_feature(hub->hdev, (selector << 8) | port1, + struct usb_port *port_dev = hub->ports[port1 - 1]; + int status; + + status = set_port_feature(hub->hdev, (selector << 8) | port1, USB_PORT_FEAT_INDICATOR); - if (status < 0) - dev_dbg (hub->intfdev, - "port %d indicator %s status %d\n", - port1, - ({ char *s; switch (selector) { - case HUB_LED_AMBER: s = "amber"; break; - case HUB_LED_GREEN: s = "green"; break; - case HUB_LED_OFF: s = "off"; break; - case HUB_LED_AUTO: s = "auto"; break; - default: s = "??"; break; - } s; }), - status); + dev_dbg(&port_dev->dev, "indicator %s status %d\n", + to_led_name(selector), status); } #define LED_CYCLE_PERIOD ((2*HZ)/3) @@ -909,20 +914,20 @@ static int hub_usb3_port_disable(struct usb_hub *hub, int port1) msleep(HUB_DEBOUNCE_STEP); } if (total_time >= HUB_DEBOUNCE_TIMEOUT) - dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n", - port1, total_time); + dev_warn(&hub->ports[port1 - 1]->dev, + "Could not disable after %d ms\n", total_time); return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); } static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) { + struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *hdev = hub->hdev; int ret = 0; - if (hub->ports[port1 - 1]->child && set_state) - usb_set_device_state(hub->ports[port1 - 1]->child, - USB_STATE_NOTATTACHED); + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); if (!hub->error) { if (hub_is_superspeed(hub->hdev)) ret = hub_usb3_port_disable(hub, port1); @@ -931,8 +936,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) USB_PORT_FEAT_ENABLE); } if (ret && ret != -ENODEV) - dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", - port1, ret); + dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); return ret; } @@ -943,7 +947,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) */ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) { - dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1); + dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n"); hub_port_disable(hub, port1, 1); /* FIXME let caller ask to power down the port: @@ -1081,21 +1085,23 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) } init2: - /* Check each port and set hub->change_bits to let khubd know + /* + * Check each port and set hub->change_bits to let khubd know * which ports need attention. */ for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - struct usb_device *udev = hub->ports[port1 - 1]->child; + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; u16 portstatus, portchange; portstatus = portchange = 0; status = hub_port_status(hub, port1, &portstatus, &portchange); if (udev || (portstatus & USB_PORT_STAT_CONNECTION)) - dev_dbg(hub->intfdev, - "port %d: status %04x change %04x\n", - port1, portstatus, portchange); + dev_dbg(&port_dev->dev, "status %04x change %04x\n", + portstatus, portchange); - /* After anything other than HUB_RESUME (i.e., initialization + /* + * After anything other than HUB_RESUME (i.e., initialization * or any sort of reset), every port should be disabled. * Unconnected ports should likewise be disabled (paranoia), * and so should ports for which we have no usb_device. @@ -2571,9 +2577,9 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (delay_time >= 2 * HUB_SHORT_RESET_TIME) delay = HUB_LONG_RESET_TIME; - dev_dbg (hub->intfdev, - "port %d not %sreset yet, waiting %dms\n", - port1, warm ? "warm " : "", delay); + dev_dbg(&hub->ports[port1 - 1]->dev, + "not %sreset yet, waiting %dms\n", + warm ? "warm " : "", delay); } if ((portstatus & USB_PORT_STAT_RESET)) @@ -2657,6 +2663,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, { int i, status; u16 portchange, portstatus; + struct usb_port *port_dev = hub->ports[port1 - 1]; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2690,9 +2697,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, if (status == -ENODEV) { ; /* The hub is gone */ } else if (status) { - dev_err(hub->intfdev, - "cannot %sreset port %d (err = %d)\n", - warm ? "warm " : "", port1, status); + dev_err(&port_dev->dev, + "cannot %sreset (err = %d)\n", + warm ? "warm " : "", status); } else { status = hub_port_wait_reset(hub, port1, udev, delay, warm); @@ -2725,21 +2732,19 @@ static int hub_port_reset(struct usb_hub *hub, int port1, * hot or warm reset failed. Try another warm reset. */ if (!warm) { - dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n", - port1); + dev_dbg(&port_dev->dev, + "hot reset failed, warm reset\n"); warm = true; } } - dev_dbg (hub->intfdev, - "port %d not enabled, trying %sreset again...\n", - port1, warm ? "warm " : ""); + dev_dbg(&port_dev->dev, + "not enabled, trying %sreset again...\n", + warm ? "warm " : ""); delay = HUB_LONG_RESET_TIME; } - dev_err (hub->intfdev, - "Cannot enable port %i. Maybe the USB cable is bad?\n", - port1); + dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n"); done: if (!hub_is_superspeed(hub->hdev)) @@ -2790,6 +2795,8 @@ static int check_port_resume_type(struct usb_device *udev, struct usb_hub *hub, int port1, int status, unsigned portchange, unsigned portstatus) { + struct usb_port *port_dev = hub->ports[port1 - 1]; + /* Is the device still present? */ if (status || port_is_suspended(hub, portstatus) || !port_is_power_on(hub, portstatus) || @@ -2809,9 +2816,8 @@ static int check_port_resume_type(struct usb_device *udev, } if (status) { - dev_dbg(hub->intfdev, - "port %d status %04x.%04x after resume, %d\n", - port1, portchange, portstatus, status); + dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n", + portchange, portstatus, status); } else if (udev->reset_resume) { /* Late port handoff can set status-change bits */ @@ -3042,8 +3048,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) status = 0; } if (status) { - dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", - port1, status); + dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status); /* Try to enable USB3 LPM and LTM again */ usb_unlocked_enable_lpm(udev); @@ -3234,8 +3239,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) if (status == 0 && !port_is_suspended(hub, portstatus)) goto SuspendCleared; - /* dev_dbg(hub->intfdev, "resume port %d\n", port1); */ - set_bit(port1, hub->busy_bits); /* see 7.1.7.7; affects power usage, but not budgeting */ @@ -3245,8 +3248,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) status = usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); if (status) { - dev_dbg(hub->intfdev, "can't resume port %d, status %d\n", - port1, status); + dev_dbg(&port_dev->dev, "can't resume, status %d\n", status); } else { /* drive resume for at least 20 msec */ dev_dbg(&udev->dev, "usb %sresume\n", @@ -3347,12 +3349,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) */ hub->wakeup_enabled_descendants = 0; for (port1 = 1; port1 <= hdev->maxchild; port1++) { - struct usb_device *udev; + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; - udev = hub->ports[port1 - 1]->child; if (udev && udev->can_submit) { - dev_warn(&intf->dev, "port %d not suspended yet\n", - port1); + dev_warn(&port_dev->dev, "not suspended yet\n"); if (PMSG_IS_AUTO(msg)) return -EBUSY; } @@ -3892,9 +3893,10 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm); int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected) { int ret; - int total_time, stable_time = 0; u16 portchange, portstatus; unsigned connection = 0xffff; + int total_time, stable_time = 0; + struct usb_port *port_dev = hub->ports[port1 - 1]; for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { ret = hub_port_status(hub, port1, &portstatus, &portchange); @@ -3923,9 +3925,8 @@ int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected) msleep(HUB_DEBOUNCE_STEP); } - dev_dbg (hub->intfdev, - "debounce: port %d: total %dms stable %dms status 0x%x\n", - port1, total_time, stable_time, portstatus); + dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n", + total_time, stable_time, portstatus); if (stable_time < HUB_DEBOUNCE_STABLE) return -ETIMEDOUT; @@ -3984,13 +3985,14 @@ static int hub_set_address(struct usb_device *udev, int devnum) */ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev) { - int connect_type; + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; if (!udev->usb2_hw_lpm_capable) return; - connect_type = usb_get_hub_port_connect_type(udev->parent, - udev->portnum); + if (hub) + connect_type = hub->ports[udev->portnum - 1]->connect_type; if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) || connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { @@ -4366,9 +4368,10 @@ hub_power_remaining (struct usb_hub *hub) remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent; for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - struct usb_device *udev = hub->ports[port1 - 1]->child; - int delta; - unsigned unit_load; + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + unsigned unit_load; + int delta; if (!udev) continue; @@ -4388,9 +4391,8 @@ hub_power_remaining (struct usb_hub *hub) else delta = 8; if (delta > hub->mA_per_port) - dev_warn(&udev->dev, - "%dmA is over %umA budget for port %d!\n", - delta, hub->mA_per_port, port1); + dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n", + delta, hub->mA_per_port); remaining -= delta; } if (remaining < 0) { @@ -4413,15 +4415,14 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, u16 portstatus, u16 portchange) { struct usb_device *hdev = hub->hdev; - struct device *hub_dev = hub->intfdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *udev; int status, i; unsigned unit_load; - dev_dbg (hub_dev, - "port %d, status %04x, change %04x, %s\n", - port1, portstatus, portchange, portspeed(hub, portstatus)); + dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", + portstatus, portchange, portspeed(hub, portstatus)); if (hub->has_indicators) { set_port_led(hub, port1, HUB_LED_AUTO); @@ -4436,7 +4437,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif /* Try to resuscitate an existing device */ - udev = hub->ports[port1 - 1]->child; + udev = port_dev->child; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { usb_lock_device(udev); @@ -4468,7 +4469,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (hcd->phy && !hdev->parent && !(portstatus & USB_PORT_STAT_CONNECTION)) usb_phy_notify_disconnect(hcd->phy, udev->speed); - usb_disconnect(&hub->ports[port1 - 1]->child); + usb_disconnect(&port_dev->child); } clear_bit(port1, hub->change_bits); @@ -4484,8 +4485,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = hub_port_debounce_be_stable(hub, port1); if (status < 0) { if (status != -ENODEV && printk_ratelimit()) - dev_err(hub_dev, "connect-debounce failed, " - "port %d disabled\n", port1); + dev_err(&port_dev->dev, + "connect-debounce failed\n"); portstatus &= ~USB_PORT_STAT_CONNECTION; } else { portstatus = status; @@ -4520,9 +4521,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, */ udev = usb_alloc_dev(hdev, hdev->bus, port1); if (!udev) { - dev_err (hub_dev, - "couldn't allocate port %d usb_device\n", - port1); + dev_err(&port_dev->dev, + "couldn't allocate usb_device\n"); goto done; } @@ -4604,7 +4604,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (hdev->state == USB_STATE_NOTATTACHED) status = -ENOTCONN; else - hub->ports[port1 - 1]->child = udev; + port_dev->child = udev; spin_unlock_irq(&device_state_lock); /* Run it through the hoops (find a driver, etc) */ @@ -4612,7 +4612,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = usb_new_device(udev); if (status) { spin_lock_irq(&device_state_lock); - hub->ports[port1 - 1]->child = NULL; + port_dev->child = NULL; spin_unlock_irq(&device_state_lock); } } @@ -4622,7 +4622,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = hub_power_remaining(hub); if (status) - dev_dbg(hub_dev, "%dmA power budget left\n", status); + dev_dbg(hub->intfdev, "%dmA power budget left\n", status); return; @@ -4640,8 +4640,8 @@ loop: !hcd->driver->port_handed_over || !(hcd->driver->port_handed_over)(hcd, port1)) { if (status != -ENOTCONN && status != -ENODEV) - dev_err(hub_dev, "unable to enumerate USB device on port %d\n", - port1); + dev_err(&port_dev->dev, + "unable to enumerate USB device\n"); } done: @@ -4654,13 +4654,14 @@ done: static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, u16 portstatus, u16 portchange) { + struct usb_port *port_dev = hub->ports[port - 1]; struct usb_device *hdev; struct usb_device *udev; int connect_change = 0; int ret; hdev = hub->hdev; - udev = hub->ports[port - 1]->child; + udev = port_dev->child; if (!hub_is_superspeed(hdev)) { if (!(portchange & USB_PORT_STAT_C_SUSPEND)) return 0; @@ -4685,8 +4686,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, ret = -ENODEV; hub_port_disable(hub, port, 1); } - dev_dbg(hub->intfdev, "resume on port %d, status %d\n", - port, ret); + dev_dbg(&port_dev->dev, "resume, status %d\n", ret); return connect_change; } @@ -4776,7 +4776,8 @@ static void hub_events(void) /* deal with port status changes */ for (i = 1; i <= hdev->maxchild; i++) { - struct usb_device *udev = hub->ports[i - 1]->child; + struct usb_port *port_dev = hub->ports[i - 1]; + struct usb_device *udev = port_dev->child; if (test_bit(i, hub->busy_bits)) continue; @@ -4799,10 +4800,9 @@ static void hub_events(void) if (portchange & USB_PORT_STAT_C_ENABLE) { if (!connect_change) - dev_dbg (hub_dev, - "port %d enable change, " - "status %08x\n", - i, portstatus); + dev_dbg(&port_dev->dev, + "enable change, status %08x\n", + portstatus); usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_ENABLE); @@ -4813,13 +4813,9 @@ static void hub_events(void) * Works at least with mouse driver. */ if (!(portstatus & USB_PORT_STAT_ENABLE) - && !connect_change - && hub->ports[i - 1]->child) { - dev_err (hub_dev, - "port %i " - "disabled by hub (EMI?), " - "re-enabling...\n", - i); + && !connect_change && udev) { + dev_err(&port_dev->dev, + "disabled by hub (EMI?), re-enabling...\n"); connect_change = 1; } } @@ -4832,30 +4828,25 @@ static void hub_events(void) u16 status = 0; u16 unused; - dev_dbg(hub_dev, "over-current change on port " - "%d\n", i); + dev_dbg(&port_dev->dev, "over-current change\n"); usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_OVER_CURRENT); msleep(100); /* Cool down */ hub_power_on(hub, true); hub_port_status(hub, i, &status, &unused); if (status & USB_PORT_STAT_OVERCURRENT) - dev_err(hub_dev, "over-current " - "condition on port %d\n", i); + dev_err(&port_dev->dev, + "over-current condition\n"); } if (portchange & USB_PORT_STAT_C_RESET) { - dev_dbg (hub_dev, - "reset change on port %d\n", - i); + dev_dbg(&port_dev->dev, "reset change\n"); usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_RESET); } if ((portchange & USB_PORT_STAT_C_BH_RESET) && hub_is_superspeed(hub->hdev)) { - dev_dbg(hub_dev, - "warm reset change on port %d\n", - i); + dev_dbg(&port_dev->dev, "warm reset change\n"); usb_clear_port_feature(hdev, i, USB_PORT_FEAT_C_BH_PORT_RESET); } @@ -4864,9 +4855,7 @@ static void hub_events(void) USB_PORT_FEAT_C_PORT_LINK_STATE); } if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) { - dev_warn(hub_dev, - "config error on port %d\n", - i); + dev_warn(&port_dev->dev, "config error\n"); usb_clear_port_feature(hub->hdev, i, USB_PORT_FEAT_C_PORT_CONFIG_ERROR); } @@ -4877,7 +4866,7 @@ static void hub_events(void) if (hub_port_warm_reset_required(hub, portstatus)) { int status; - dev_dbg(hub_dev, "warm reset port %d\n", i); + dev_dbg(&port_dev->dev, "warm reset\n"); if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) || udev->state == USB_STATE_NOTATTACHED) { @@ -5478,56 +5467,26 @@ struct usb_device *usb_hub_find_child(struct usb_device *hdev, } EXPORT_SYMBOL_GPL(usb_hub_find_child); -/** - * usb_set_hub_port_connect_type - set hub port connect type. - * @hdev: USB device belonging to the usb hub - * @port1: port num of the port - * @type: connect type of the port - */ -void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, - enum usb_port_connect_type type) -{ - struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - - if (hub) - hub->ports[port1 - 1]->connect_type = type; -} - -/** - * usb_get_hub_port_connect_type - Get the port's connect type - * @hdev: USB device belonging to the usb hub - * @port1: port num of the port - * - * Return: The connect type of the port if successful. Or - * USB_PORT_CONNECT_TYPE_UNKNOWN if input params are invalid. - */ -enum usb_port_connect_type -usb_get_hub_port_connect_type(struct usb_device *hdev, int port1) -{ - struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - - if (!hub) - return USB_PORT_CONNECT_TYPE_UNKNOWN; - - return hub->ports[port1 - 1]->connect_type; -} - void usb_hub_adjust_deviceremovable(struct usb_device *hdev, struct usb_hub_descriptor *desc) { + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); enum usb_port_connect_type connect_type; int i; + if (!hub) + return; + if (!hub_is_superspeed(hdev)) { for (i = 1; i <= hdev->maxchild; i++) { - connect_type = usb_get_hub_port_connect_type(hdev, i); + struct usb_port *port_dev = hub->ports[i - 1]; + connect_type = port_dev->connect_type; if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { u8 mask = 1 << (i%8); if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) { - dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n", - i); + dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n"); desc->u.hs.DeviceRemovable[i/8] |= mask; } } @@ -5536,14 +5495,14 @@ void usb_hub_adjust_deviceremovable(struct usb_device *hdev, u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable); for (i = 1; i <= hdev->maxchild; i++) { - connect_type = usb_get_hub_port_connect_type(hdev, i); + struct usb_port *port_dev = hub->ports[i - 1]; + connect_type = port_dev->connect_type; if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { u16 mask = 1 << i; if (!(port_removable & mask)) { - dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n", - i); + dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n"); port_removable |= mask; } } diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 168fa6ee3348..6a8999728cbf 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -152,6 +152,11 @@ struct device_type usb_port_device_type = { .pm = &usb_port_pm_ops, }; +static struct device_driver usb_port_driver = { + .name = "usb", + .owner = THIS_MODULE, +}; + int usb_hub_create_port_device(struct usb_hub *hub, int port1) { struct usb_port *port_dev = NULL; @@ -169,8 +174,9 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) port_dev->dev.parent = hub->intfdev; port_dev->dev.groups = port_dev_group; port_dev->dev.type = &usb_port_device_type; - dev_set_name(&port_dev->dev, "port%d", port1); - + port_dev->dev.driver = &usb_port_driver; + dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev), + port1); retval = device_register(&port_dev->dev); if (retval) goto error_register; diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index 5ca4070b1f38..f91ef0220066 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -17,7 +17,7 @@ #include #include -#include "usb.h" +#include "hub.h" /** * usb_acpi_power_manageable - check whether usb port has @@ -55,13 +55,18 @@ EXPORT_SYMBOL_GPL(usb_acpi_power_manageable); */ int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) { + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_port *port_dev; acpi_handle port_handle; unsigned char state; int port1 = index + 1; int error = -EINVAL; - port_handle = (acpi_handle)usb_get_hub_port_acpi_handle(hdev, - port1); + if (!hub) + return -ENODEV; + port_dev = hub->ports[port1 - 1]; + + port_handle = (acpi_handle) usb_get_hub_port_acpi_handle(hdev, port1); if (!port_handle) return error; @@ -72,10 +77,9 @@ int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) error = acpi_bus_set_power(port_handle, state); if (!error) - dev_dbg(&hdev->dev, "The power of hub port %d was set to %d\n", - port1, enable); + dev_dbg(&port_dev->dev, "acpi: power was set to %d\n", enable); else - dev_dbg(&hdev->dev, "The power of hub port failed to be set\n"); + dev_dbg(&port_dev->dev, "acpi: power failed to be set\n"); return error; } @@ -84,12 +88,17 @@ EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); static int usb_acpi_check_port_connect_type(struct usb_device *hdev, acpi_handle handle, int port1) { - acpi_status status; + enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *upc; + struct usb_hub *hub = usb_hub_to_struct_hub(hdev); struct acpi_pld_info *pld; + union acpi_object *upc; + acpi_status status; int ret = 0; + if (!hub) + return 0; + /* * According to ACPI Spec 9.13. PLD indicates whether usb port is * user visible and _UPC indicates whether it is connectable. If @@ -112,13 +121,12 @@ static int usb_acpi_check_port_connect_type(struct usb_device *hdev, if (upc->package.elements[0].integer.value) if (pld->user_visible) - usb_set_hub_port_connect_type(hdev, port1, - USB_PORT_CONNECT_TYPE_HOT_PLUG); + connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG; else - usb_set_hub_port_connect_type(hdev, port1, - USB_PORT_CONNECT_TYPE_HARD_WIRED); + connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; else if (!pld->user_visible) - usb_set_hub_port_connect_type(hdev, port1, USB_PORT_NOT_USED); + connect_type = USB_PORT_NOT_USED; + hub->ports[port1 - 1]->connect_type = connect_type; out: ACPI_FREE(pld); @@ -128,9 +136,9 @@ out: static struct acpi_device *usb_acpi_find_companion(struct device *dev) { + int port1; struct usb_device *udev; acpi_handle *parent_handle; - int port_num; /* * In the ACPI DSDT table, only usb root hub and usb ports are @@ -147,16 +155,16 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) */ if (is_usb_device(dev)) { udev = to_usb_device(dev); + port1 = udev->portnum; if (udev->parent) { - enum usb_port_connect_type type; + struct usb_hub *hub; + hub = usb_hub_to_struct_hub(udev->parent); /* * According usb port's connect type to set usb device's * removability. */ - type = usb_get_hub_port_connect_type(udev->parent, - udev->portnum); - switch (type) { + switch (hub->ports[port1 - 1]->connect_type) { case USB_PORT_CONNECT_TYPE_HOT_PLUG: udev->removable = USB_DEVICE_REMOVABLE; break; @@ -173,13 +181,14 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) /* root hub's parent is the usb hcd. */ return acpi_find_child_device(ACPI_COMPANION(dev->parent), - udev->portnum, false); + port1, false); } else if (is_usb_port(dev)) { + struct usb_port *port_dev = to_usb_port(dev); struct acpi_device *adev = NULL; - sscanf(dev_name(dev), "port%d", &port_num); /* Get the struct usb_device point of port's hub */ udev = to_usb_device(dev->parent->parent); + port1 = port_dev->portnum; /* * The root hub ports' parent is the root hub. The non-root-hub @@ -188,12 +197,11 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) */ if (!udev->parent) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); - int raw_port_num; + int raw; - raw_port_num = usb_hcd_find_raw_port_number(hcd, - port_num); + raw = usb_hcd_find_raw_port_number(hcd, port1); adev = acpi_find_child_device(ACPI_COMPANION(&udev->dev), - raw_port_num, false); + raw, false); if (!adev) return NULL; } else { @@ -204,11 +212,11 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) return NULL; acpi_bus_get_device(parent_handle, &adev); - adev = acpi_find_child_device(adev, port_num, false); + adev = acpi_find_child_device(adev, port1, false); if (!adev) return NULL; } - usb_acpi_check_port_connect_type(udev, adev->handle, port_num); + usb_acpi_check_port_connect_type(udev, adev->handle, port1); return adev; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 75bf649da82d..69bfc253a7b8 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -175,10 +175,6 @@ extern void usb_notify_add_device(struct usb_device *udev); extern void usb_notify_remove_device(struct usb_device *udev); extern void usb_notify_add_bus(struct usb_bus *ubus); extern void usb_notify_remove_bus(struct usb_bus *ubus); -extern enum usb_port_connect_type - usb_get_hub_port_connect_type(struct usb_device *hdev, int port1); -extern void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1, - enum usb_port_connect_type type); extern void usb_hub_adjust_deviceremovable(struct usb_device *hdev, struct usb_hub_descriptor *desc); From a4204ff0bd576fc114357eed70e7c4e776ddf396 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:22 -0700 Subject: [PATCH 283/314] usb: cleanup setting udev->removable from port_dev->connect_type Once usb-acpi has set the port's connect type the usb_device's ->removable attribute can be set in the standard location set_usb_port_removable(). This also changes behavior in the case where the firmware says that the port connect type is unknown. In that case just use the default setting determined from the hub descriptor. Note, we no longer pass udev->portnum to acpi_find_child_device() in the root hub case since: 1/ the usb-core sets this to zero 2/ acpi always expects zero ...just pass zero. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 22 +++++++++++++++++----- drivers/usb/core/usb-acpi.c | 34 ++++++---------------------------- 2 files changed, 23 insertions(+), 33 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 653f80c52486..291292508774 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2305,6 +2305,22 @@ static void set_usb_port_removable(struct usb_device *udev) udev->removable = USB_DEVICE_REMOVABLE; else udev->removable = USB_DEVICE_FIXED; + + /* + * Platform firmware may have populated an alternative value for + * removable. If the parent port has a known connect_type use + * that instead. + */ + switch (hub->ports[udev->portnum - 1]->connect_type) { + case USB_PORT_CONNECT_TYPE_HOT_PLUG: + udev->removable = USB_DEVICE_REMOVABLE; + break; + case USB_PORT_CONNECT_TYPE_HARD_WIRED: + udev->removable = USB_DEVICE_FIXED; + break; + default: /* use what was set above */ + break; + } } /** @@ -2374,11 +2390,7 @@ int usb_new_device(struct usb_device *udev) device_enable_async_suspend(&udev->dev); - /* - * check whether the hub marks this port as non-removable. Do it - * now so that platform-specific data can override it in - * device_add() - */ + /* check whether the hub or firmware marks this port as non-removable */ if (udev->parent) set_usb_port_removable(udev); diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index f91ef0220066..d3e7e1b4125e 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -136,8 +136,8 @@ out: static struct acpi_device *usb_acpi_find_companion(struct device *dev) { - int port1; struct usb_device *udev; + struct acpi_device *adev; acpi_handle *parent_handle; /* @@ -155,40 +155,18 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) */ if (is_usb_device(dev)) { udev = to_usb_device(dev); - port1 = udev->portnum; - if (udev->parent) { - struct usb_hub *hub; - - hub = usb_hub_to_struct_hub(udev->parent); - /* - * According usb port's connect type to set usb device's - * removability. - */ - switch (hub->ports[port1 - 1]->connect_type) { - case USB_PORT_CONNECT_TYPE_HOT_PLUG: - udev->removable = USB_DEVICE_REMOVABLE; - break; - case USB_PORT_CONNECT_TYPE_HARD_WIRED: - udev->removable = USB_DEVICE_FIXED; - break; - default: - udev->removable = USB_DEVICE_REMOVABLE_UNKNOWN; - break; - } - + if (udev->parent) return NULL; - } - /* root hub's parent is the usb hcd. */ - return acpi_find_child_device(ACPI_COMPANION(dev->parent), - port1, false); + /* root hub is only child (_ADR=0) under its parent, the HC */ + adev = ACPI_COMPANION(dev->parent); + return acpi_find_child_device(adev, 0, false); } else if (is_usb_port(dev)) { struct usb_port *port_dev = to_usb_port(dev); - struct acpi_device *adev = NULL; + int port1 = port_dev->portnum; /* Get the struct usb_device point of port's hub */ udev = to_usb_device(dev->parent->parent); - port1 = port_dev->portnum; /* * The root hub ports' parent is the root hub. The non-root-hub From d8521afe35862f4fbe3ccd6ca37897c0a304edf3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:28 -0700 Subject: [PATCH 284/314] usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 43 +++++++++++++++++++----- drivers/usb/core/hub.c | 42 ++++++++++++++++-------- drivers/usb/core/hub.h | 2 ++ drivers/usb/core/port.c | 73 ++++++++++++++++++++++++++++++++++++++--- drivers/usb/core/usb.h | 1 + 5 files changed, 134 insertions(+), 27 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 174eb857a6b4..b81407518fdf 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2458,11 +2458,13 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, mutex_init(hcd->bandwidth_mutex); dev_set_drvdata(dev, hcd); } else { + mutex_lock(&usb_port_peer_mutex); hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex; hcd->primary_hcd = primary_hcd; primary_hcd->primary_hcd = primary_hcd; hcd->shared_hcd = primary_hcd; primary_hcd->shared_hcd = hcd; + mutex_unlock(&usb_port_peer_mutex); } kref_init(&hcd->kref); @@ -2514,18 +2516,25 @@ EXPORT_SYMBOL_GPL(usb_create_hcd); * deallocated. * * Make sure to only deallocate the bandwidth_mutex when the primary HCD is - * freed. When hcd_release() is called for the non-primary HCD, set the - * primary_hcd's shared_hcd pointer to null (since the non-primary HCD will be - * freed shortly). + * freed. When hcd_release() is called for either hcd in a peer set + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to + * block new peering attempts */ -static void hcd_release (struct kref *kref) +static void hcd_release(struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); + mutex_lock(&usb_port_peer_mutex); if (usb_hcd_is_primary_hcd(hcd)) kfree(hcd->bandwidth_mutex); - else - hcd->shared_hcd->shared_hcd = NULL; + if (hcd->shared_hcd) { + struct usb_hcd *peer = hcd->shared_hcd; + + peer->shared_hcd = NULL; + if (peer->primary_hcd == hcd) + peer->primary_hcd = NULL; + } + mutex_unlock(&usb_port_peer_mutex); kfree(hcd); } @@ -2593,6 +2602,21 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, return 0; } +/* + * Before we free this root hub, flush in-flight peering attempts + * and disable peer lookups + */ +static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) +{ + struct usb_device *rhdev; + + mutex_lock(&usb_port_peer_mutex); + rhdev = hcd->self.root_hub; + hcd->self.root_hub = NULL; + mutex_unlock(&usb_port_peer_mutex); + usb_put_dev(rhdev); +} + /** * usb_add_hcd - finish generic HCD structure initialization and register * @hcd: the usb_hcd structure to initialize @@ -2653,7 +2677,9 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = -ENOMEM; goto err_allocate_root_hub; } + mutex_lock(&usb_port_peer_mutex); hcd->self.root_hub = rhdev; + mutex_unlock(&usb_port_peer_mutex); switch (hcd->speed) { case HCD_USB11: @@ -2762,7 +2788,7 @@ err_hcd_driver_start: err_request_irq: err_hcd_driver_setup: err_set_rh_speed: - usb_put_dev(hcd->self.root_hub); + usb_put_invalidate_rhdev(hcd); err_allocate_root_hub: usb_deregister_bus(&hcd->self); err_register_bus: @@ -2842,7 +2868,6 @@ void usb_remove_hcd(struct usb_hcd *hcd) free_irq(hcd->irq, hcd); } - usb_put_dev(hcd->self.root_hub); usb_deregister_bus(&hcd->self); hcd_buffer_destroy(hcd); if (hcd->remove_phy && hcd->phy) { @@ -2850,6 +2875,8 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_put_phy(hcd->phy); hcd->phy = NULL; } + + usb_put_invalidate_rhdev(hcd); } EXPORT_SYMBOL_GPL(usb_remove_hcd); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 291292508774..5a909ba6fb67 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -55,6 +55,9 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; +/* synchronize hub-port add/remove and peering operations */ +DEFINE_MUTEX(usb_port_peer_mutex); + /* cycle leds on hubs that aren't blinking for attention */ static bool blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); @@ -1323,6 +1326,7 @@ static int hub_configure(struct usb_hub *hub, char *message = "out of memory"; unsigned unit_load; unsigned full_load; + unsigned maxchild; hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); if (!hub->buffer) { @@ -1361,12 +1365,11 @@ static int hub_configure(struct usb_hub *hub, goto fail; } - hdev->maxchild = hub->descriptor->bNbrPorts; - dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, - (hdev->maxchild == 1) ? "" : "s"); + maxchild = hub->descriptor->bNbrPorts; + dev_info(hub_dev, "%d port%s detected\n", maxchild, + (maxchild == 1) ? "" : "s"); - hub->ports = kzalloc(hdev->maxchild * sizeof(struct usb_port *), - GFP_KERNEL); + hub->ports = kzalloc(maxchild * sizeof(struct usb_port *), GFP_KERNEL); if (!hub->ports) { ret = -ENOMEM; goto fail; @@ -1387,11 +1390,11 @@ static int hub_configure(struct usb_hub *hub, int i; char portstr[USB_MAXCHILDREN + 1]; - for (i = 0; i < hdev->maxchild; i++) + for (i = 0; i < maxchild; i++) portstr[i] = hub->descriptor->u.hs.DeviceRemovable [((i + 1) / 8)] & (1 << ((i + 1) % 8)) ? 'F' : 'R'; - portstr[hdev->maxchild] = 0; + portstr[maxchild] = 0; dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr); } else dev_dbg(hub_dev, "standalone hub\n"); @@ -1503,7 +1506,7 @@ static int hub_configure(struct usb_hub *hub, if (hcd->power_budget > 0) hdev->bus_mA = hcd->power_budget; else - hdev->bus_mA = full_load * hdev->maxchild; + hdev->bus_mA = full_load * maxchild; if (hdev->bus_mA >= full_load) hub->mA_per_port = full_load; else { @@ -1518,7 +1521,7 @@ static int hub_configure(struct usb_hub *hub, hub->descriptor->bHubContrCurrent); hub->limited_power = 1; - if (remaining < hdev->maxchild * unit_load) + if (remaining < maxchild * unit_load) dev_warn(hub_dev, "insufficient power available " "to use all downstream ports\n"); @@ -1586,15 +1589,19 @@ static int hub_configure(struct usb_hub *hub, if (hub->has_indicators && blinkenlights) hub->indicator[0] = INDICATOR_CYCLE; - for (i = 0; i < hdev->maxchild; i++) { + mutex_lock(&usb_port_peer_mutex); + for (i = 0; i < maxchild; i++) { ret = usb_hub_create_port_device(hub, i + 1); if (ret < 0) { dev_err(hub->intfdev, "couldn't create port%d device.\n", i + 1); - hdev->maxchild = i; - goto fail_keep_maxchild; + break; } } + hdev->maxchild = i; + mutex_unlock(&usb_port_peer_mutex); + if (ret < 0) + goto fail; usb_hub_adjust_deviceremovable(hdev, hub->descriptor); @@ -1602,8 +1609,6 @@ static int hub_configure(struct usb_hub *hub, return 0; fail: - hdev->maxchild = 0; -fail_keep_maxchild: dev_err (hub_dev, "config failed, %s (err %d)\n", message, ret); /* hub_disconnect() frees urb and descriptor */ @@ -1639,6 +1644,8 @@ static void hub_disconnect(struct usb_interface *intf) hub->error = 0; hub_quiesce(hub, HUB_DISCONNECT); + mutex_lock(&usb_port_peer_mutex); + /* Avoid races with recursively_mark_NOTATTACHED() */ spin_lock_irq(&device_state_lock); port1 = hdev->maxchild; @@ -1649,6 +1656,8 @@ static void hub_disconnect(struct usb_interface *intf) for (; port1 > 0; --port1) usb_hub_remove_port_device(hub, port1); + mutex_unlock(&usb_port_peer_mutex); + if (hub->hdev->speed == USB_SPEED_HIGH) highspeed_hubs--; @@ -4608,6 +4617,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, */ status = 0; + mutex_lock(&usb_port_peer_mutex); + /* We mustn't add new devices if the parent hub has * been disconnected; we would race with the * recursively_mark_NOTATTACHED() routine. @@ -4618,14 +4629,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, else port_dev->child = udev; spin_unlock_irq(&device_state_lock); + mutex_unlock(&usb_port_peer_mutex); /* Run it through the hoops (find a driver, etc) */ if (!status) { status = usb_new_device(udev); if (status) { + mutex_lock(&usb_port_peer_mutex); spin_lock_irq(&device_state_lock); port_dev->child = NULL; spin_unlock_irq(&device_state_lock); + mutex_unlock(&usb_port_peer_mutex); } } diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 4bd72dd303d5..fcad5f9d12f0 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -82,6 +82,7 @@ struct usb_hub { * @child: usb device attached to the port * @dev: generic device interface * @port_owner: port's owner + * @peer: related usb2 and usb3 ports (share the same connector) * @connect_type: port's connect type * @portnum: port index num based one * @power_is_on: port's power state @@ -91,6 +92,7 @@ struct usb_port { struct usb_device *child; struct device dev; struct usb_dev_state *port_owner; + struct usb_port *peer; enum usb_port_connect_type connect_type; u8 portnum; unsigned power_is_on:1; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 6a8999728cbf..5ecdbf31dfcb 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -157,9 +157,66 @@ static struct device_driver usb_port_driver = { .owner = THIS_MODULE, }; +static void link_peers(struct usb_port *left, struct usb_port *right) +{ + if (left->peer == right && right->peer == left) + return; + + if (left->peer || right->peer) { + struct usb_port *lpeer = left->peer; + struct usb_port *rpeer = right->peer; + + WARN(1, "failed to peer %s and %s (%s -> %p) (%s -> %p)\n", + dev_name(&left->dev), dev_name(&right->dev), + dev_name(&left->dev), lpeer, + dev_name(&right->dev), rpeer); + return; + } + + left->peer = right; + right->peer = left; +} + +static void unlink_peers(struct usb_port *left, struct usb_port *right) +{ + WARN(right->peer != left || left->peer != right, + "%s and %s are not peers?\n", + dev_name(&left->dev), dev_name(&right->dev)); + + right->peer = NULL; + left->peer = NULL; +} + +/* set the default peer port for root hubs */ +static void find_and_link_peer(struct usb_hub *hub, int port1) +{ + struct usb_port *port_dev = hub->ports[port1 - 1], *peer; + struct usb_device *hdev = hub->hdev; + + if (!hdev->parent) { + struct usb_hub *peer_hub; + struct usb_device *peer_hdev; + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_hcd *peer_hcd = hcd->shared_hcd; + + if (!peer_hcd) + return; + + peer_hdev = peer_hcd->self.root_hub; + peer_hub = usb_hub_to_struct_hub(peer_hdev); + if (!peer_hub || port1 > peer_hdev->maxchild) + return; + + peer = peer_hub->ports[port1 - 1]; + + if (peer) + link_peers(port_dev, peer); + } +} + int usb_hub_create_port_device(struct usb_hub *hub, int port1) { - struct usb_port *port_dev = NULL; + struct usb_port *port_dev; int retval; port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); @@ -181,6 +238,8 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) if (retval) goto error_register; + find_and_link_peer(hub, port1); + pm_runtime_set_active(&port_dev->dev); /* @@ -203,9 +262,13 @@ exit: return retval; } -void usb_hub_remove_port_device(struct usb_hub *hub, - int port1) +void usb_hub_remove_port_device(struct usb_hub *hub, int port1) { - device_unregister(&hub->ports[port1 - 1]->dev); -} + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_port *peer; + peer = port_dev->peer; + if (peer) + unlink_peers(port_dev, peer); + device_unregister(&port_dev->dev); +} diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 69bfc253a7b8..6afa738b5ba4 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -119,6 +119,7 @@ static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) #endif extern struct bus_type usb_bus_type; +extern struct mutex usb_port_peer_mutex; extern struct device_type usb_device_type; extern struct device_type usb_if_device_type; extern struct device_type usb_ep_device_type; From 8b1ba80c59fb3e77f9e1761480617d5ea9ee159c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:33 -0700 Subject: [PATCH 285/314] usb: assign usb3 external hub port peers Given that root hub port peers are already established, external hub peer ports can be determined by traversing the device topology: 1/ ascend to the parent hub and find the upstream port_dev 2/ walk ->peer to find the peer port 3/ descend to the peer hub via ->child 4/ find the port with the matching port id Note that this assumes the port labeling scheme required by the specification [1]. [1]: usb3 3.1 section 10.3.3 Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 5ecdbf31dfcb..9b7496b52f2a 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -187,15 +187,18 @@ static void unlink_peers(struct usb_port *left, struct usb_port *right) left->peer = NULL; } -/* set the default peer port for root hubs */ +/* + * Set the default peer port for root hubs, or via the upstream peer + * relationship for all other hubs + */ static void find_and_link_peer(struct usb_hub *hub, int port1) { struct usb_port *port_dev = hub->ports[port1 - 1], *peer; struct usb_device *hdev = hub->hdev; + struct usb_device *peer_hdev; + struct usb_hub *peer_hub; if (!hdev->parent) { - struct usb_hub *peer_hub; - struct usb_device *peer_hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); struct usb_hcd *peer_hcd = hcd->shared_hcd; @@ -203,15 +206,28 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) return; peer_hdev = peer_hcd->self.root_hub; - peer_hub = usb_hub_to_struct_hub(peer_hdev); - if (!peer_hub || port1 > peer_hdev->maxchild) + } else { + struct usb_port *upstream; + struct usb_device *parent = hdev->parent; + struct usb_hub *parent_hub = usb_hub_to_struct_hub(parent); + + if (!parent_hub) return; - peer = peer_hub->ports[port1 - 1]; + upstream = parent_hub->ports[hdev->portnum - 1]; + if (!upstream || !upstream->peer) + return; - if (peer) - link_peers(port_dev, peer); + peer_hdev = upstream->peer->child; } + + peer_hub = usb_hub_to_struct_hub(peer_hdev); + if (!peer_hub || port1 > peer_hdev->maxchild) + return; + + peer = peer_hub->ports[port1 - 1]; + if (peer) + link_peers(port_dev, peer); } int usb_hub_create_port_device(struct usb_hub *hub, int port1) From 3bfd659baec822f54e4acb0734669e671d853a35 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:40 -0700 Subject: [PATCH 286/314] usb: find internal hub tier mismatch via acpi ACPI identifies peer ports by setting their 'group_token' and 'group_position' _PLD data to the same value. If a platform has tier mismatch [1] , ACPI can override the default (USB3 defined) peer port association for internal hubs. External hubs follow the default peer association scheme. Location data is cached as an opaque cookie in usb_port_location data. Note that we only consider the group_token and group_position attributes from the _PLD data as ACPI specifies that group_token is a unique identifier. When we find port location data for a port then we assume that the firmware will also describe its peer port. This allows the implementation to only ever set the peer once. This leads to a question about what happens when a pm runtime event occurs while the peer associations are still resolving. Since we only ever set the peer information once, a USB3 port needs to be prevented from suspending while its ->peer pointer is NULL (implemented in a subsequent patch). There is always the possibility that firmware mis-identifies the ports, but there is not much the kernel can do in that case. [1]: xhci 1.1 appendix D figure 131 [2]: acpi 5 section 6.1.8 [alan]: don't do default peering when acpi data present Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.h | 2 ++ drivers/usb/core/port.c | 56 ++++++++++++++++++++++++++++++++++--- drivers/usb/core/usb-acpi.c | 41 +++++++++++++++------------ drivers/usb/core/usb.h | 6 ++++ 4 files changed, 83 insertions(+), 22 deletions(-) diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index fcad5f9d12f0..048c797f394c 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -84,6 +84,7 @@ struct usb_hub { * @port_owner: port's owner * @peer: related usb2 and usb3 ports (share the same connector) * @connect_type: port's connect type + * @location: opaque representation of platform connector location * @portnum: port index num based one * @power_is_on: port's power state * @did_runtime_put: port has done pm_runtime_put(). @@ -94,6 +95,7 @@ struct usb_port { struct usb_dev_state *port_owner; struct usb_port *peer; enum usb_port_connect_type connect_type; + usb_port_location_t location; u8 portnum; unsigned power_is_on:1; unsigned did_runtime_put:1; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 9b7496b52f2a..aea54e8dfe47 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -188,8 +188,42 @@ static void unlink_peers(struct usb_port *left, struct usb_port *right) } /* - * Set the default peer port for root hubs, or via the upstream peer - * relationship for all other hubs + * For each usb hub device in the system check to see if it is in the + * peer domain of the given port_dev, and if it is check to see if it + * has a port that matches the given port by location + */ +static int match_location(struct usb_device *peer_hdev, void *p) +{ + int port1; + struct usb_hcd *hcd, *peer_hcd; + struct usb_port *port_dev = p, *peer; + struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); + struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent); + + if (!peer_hub) + return 0; + + hcd = bus_to_hcd(hdev->bus); + peer_hcd = bus_to_hcd(peer_hdev->bus); + /* peer_hcd is provisional until we verify it against the known peer */ + if (peer_hcd != hcd->shared_hcd) + return 0; + + for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { + peer = peer_hub->ports[port1 - 1]; + if (peer && peer->location == port_dev->location) { + link_peers(port_dev, peer); + return 1; /* done */ + } + } + + return 0; +} + +/* + * Find the peer port either via explicit platform firmware "location" + * data, the peer hcd for root hubs, or the upstream peer relationship + * for all other hubs. */ static void find_and_link_peer(struct usb_hub *hub, int port1) { @@ -198,7 +232,17 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) struct usb_device *peer_hdev; struct usb_hub *peer_hub; - if (!hdev->parent) { + /* + * If location data is available then we can only peer this port + * by a location match, not the default peer (lest we create a + * situation where we need to go back and undo a default peering + * when the port is later peered by location data) + */ + if (port_dev->location) { + /* we link the peer in match_location() if found */ + usb_for_each_dev(port_dev, match_location); + return; + } else if (!hdev->parent) { struct usb_hcd *hcd = bus_to_hcd(hdev->bus); struct usb_hcd *peer_hcd = hcd->shared_hcd; @@ -225,8 +269,12 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) if (!peer_hub || port1 > peer_hdev->maxchild) return; + /* + * we found a valid default peer, last check is to make sure it + * does not have location data + */ peer = peer_hub->ports[port1 - 1]; - if (peer) + if (peer && peer->location == 0) link_peers(port_dev, peer); } diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index d3e7e1b4125e..2776cfe64c09 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -85,19 +85,13 @@ int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) } EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); -static int usb_acpi_check_port_connect_type(struct usb_device *hdev, - acpi_handle handle, int port1) +static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, + struct acpi_pld_info *pld) { enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - struct acpi_pld_info *pld; union acpi_object *upc; acpi_status status; - int ret = 0; - - if (!hub) - return 0; /* * According to ACPI Spec 9.13. PLD indicates whether usb port is @@ -107,15 +101,10 @@ static int usb_acpi_check_port_connect_type(struct usb_device *hdev, * a usb device is directly hard-wired to the port. If no visible and * no connectable, the port would be not used. */ - status = acpi_get_physical_device_location(handle, &pld); - if (ACPI_FAILURE(status)) - return -ENODEV; - status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); upc = buffer.pointer; if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4) { - ret = -EINVAL; goto out; } @@ -126,14 +115,18 @@ static int usb_acpi_check_port_connect_type(struct usb_device *hdev, connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; else if (!pld->user_visible) connect_type = USB_PORT_NOT_USED; - hub->ports[port1 - 1]->connect_type = connect_type; - out: - ACPI_FREE(pld); kfree(upc); - return ret; + return connect_type; } + +/* + * Private to usb-acpi, all the core needs to know is that + * port_dev->location is non-zero when it has been set by the firmware. + */ +#define USB_ACPI_LOCATION_VALID (1 << 31) + static struct acpi_device *usb_acpi_find_companion(struct device *dev) { struct usb_device *udev; @@ -164,6 +157,9 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) } else if (is_usb_port(dev)) { struct usb_port *port_dev = to_usb_port(dev); int port1 = port_dev->portnum; + struct acpi_pld_info *pld; + acpi_handle *handle; + acpi_status status; /* Get the struct usb_device point of port's hub */ udev = to_usb_device(dev->parent->parent); @@ -194,7 +190,16 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev) if (!adev) return NULL; } - usb_acpi_check_port_connect_type(udev, adev->handle, port1); + handle = adev->handle; + status = acpi_get_physical_device_location(handle, &pld); + if (ACPI_FAILURE(status) || !pld) + return adev; + + port_dev->location = USB_ACPI_LOCATION_VALID + | pld->group_token << 8 | pld->group_position; + port_dev->connect_type = usb_acpi_get_connect_type(handle, pld); + ACPI_FREE(pld); + return adev; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 6afa738b5ba4..98dc08e13448 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -171,6 +171,12 @@ extern void usbfs_conn_disc_event(void); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); +/* + * Firmware specific cookie identifying a port's location. '0' == no location + * data available + */ +typedef u32 usb_port_location_t; + /* internal notify stuff */ extern void usb_notify_add_device(struct usb_device *udev); extern void usb_notify_remove_device(struct usb_device *udev); From b7e38eac88265c4cb779edc72a5906116fc6c000 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:45 -0700 Subject: [PATCH 287/314] usb: sysfs link peer ports The usb topology after this change will have symlinks between usb3 ports and their usb2 peers, for example: usb2/2-1/2-1:1.0/2-1-port1/peer => ../../../../usb3/3-1/3-1:1.0/3-1-port1 usb2/2-1/2-1:1.0/2-1-port2/peer => ../../../../usb3/3-1/3-1:1.0/3-1-port2 usb2/2-1/2-1:1.0/2-1-port3/peer => ../../../../usb3/3-1/3-1:1.0/3-1-port3 usb2/2-1/2-1:1.0/2-1-port4/peer => ../../../../usb3/3-1/3-1:1.0/3-1-port4 usb2/2-0:1.0/usb2-port1/peer => ../../../usb3/3-0:1.0/usb3-port1 usb2/2-0:1.0/usb2-port2/peer => ../../../usb3/3-0:1.0/usb3-port2 usb2/2-0:1.0/usb2-port3/peer => ../../../usb3/3-0:1.0/usb3-port3 usb2/2-0:1.0/usb2-port4/peer => ../../../usb3/3-0:1.0/usb3-port4 usb3/3-1/3-1:1.0/usb3-1-port1/peer => ../../../../usb2/2-1/2-1:1.0/2-1-port1 usb3/3-1/3-1:1.0/usb3-1-port2/peer => ../../../../usb2/2-1/2-1:1.0/2-1-port2 usb3/3-1/3-1:1.0/usb3-1-port3/peer => ../../../../usb2/2-1/2-1:1.0/2-1-port3 usb3/3-1/3-1:1.0/usb3-1-port4/peer => ../../../../usb2/2-1/2-1:1.0/2-1-port4 usb3/3-0:1.0/usb3-port1/peer => ../../../usb2/2-0:1.0/usb2-port1 usb3/3-0:1.0/usb3-port2/peer => ../../../usb2/2-0:1.0/usb2-port2 usb3/3-0:1.0/usb3-port3/peer => ../../../usb2/2-0:1.0/usb2-port3 usb3/3-0:1.0/usb3-port4/peer => ../../../usb2/2-0:1.0/usb2-port4 Introduce link_peers_report() to notify on all link_peers() failure cases. Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 39 ++++++++++++++++++++++++++++++++++----- 1 file changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index aea54e8dfe47..40c3ac173e9e 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -157,10 +157,12 @@ static struct device_driver usb_port_driver = { .owner = THIS_MODULE, }; -static void link_peers(struct usb_port *left, struct usb_port *right) +static int link_peers(struct usb_port *left, struct usb_port *right) { + int rc; + if (left->peer == right && right->peer == left) - return; + return 0; if (left->peer || right->peer) { struct usb_port *lpeer = left->peer; @@ -170,11 +172,36 @@ static void link_peers(struct usb_port *left, struct usb_port *right) dev_name(&left->dev), dev_name(&right->dev), dev_name(&left->dev), lpeer, dev_name(&right->dev), rpeer); - return; + return -EBUSY; + } + + rc = sysfs_create_link(&left->dev.kobj, &right->dev.kobj, "peer"); + if (rc) + return rc; + rc = sysfs_create_link(&right->dev.kobj, &left->dev.kobj, "peer"); + if (rc) { + sysfs_remove_link(&left->dev.kobj, "peer"); + return rc; } left->peer = right; right->peer = left; + + return 0; +} + +static void link_peers_report(struct usb_port *left, struct usb_port *right) +{ + int rc; + + rc = link_peers(left, right); + if (rc == 0) { + dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev)); + } else { + dev_warn(&left->dev, "failed to peer to %s (%d)\n", + dev_name(&right->dev), rc); + pr_warn_once("usb: port power management may be unreliable\n"); + } } static void unlink_peers(struct usb_port *left, struct usb_port *right) @@ -183,7 +210,9 @@ static void unlink_peers(struct usb_port *left, struct usb_port *right) "%s and %s are not peers?\n", dev_name(&left->dev), dev_name(&right->dev)); + sysfs_remove_link(&left->dev.kobj, "peer"); right->peer = NULL; + sysfs_remove_link(&right->dev.kobj, "peer"); left->peer = NULL; } @@ -212,7 +241,7 @@ static int match_location(struct usb_device *peer_hdev, void *p) for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { peer = peer_hub->ports[port1 - 1]; if (peer && peer->location == port_dev->location) { - link_peers(port_dev, peer); + link_peers_report(port_dev, peer); return 1; /* done */ } } @@ -275,7 +304,7 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) */ peer = peer_hub->ports[port1 - 1]; if (peer && peer->location == 0) - link_peers(port_dev, peer); + link_peers_report(port_dev, peer); } int usb_hub_create_port_device(struct usb_hub *hub, int port1) From d5c3834e4af3acc4d7fc52faba2711c666655632 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:52 -0700 Subject: [PATCH 288/314] usb: make usb_port flags atomic, rename did_runtime_put to child_usage We want to manipulate ->did_runtime_put in usb_port_runtime_resume(), but we don't want that to collide with other updates. Move usb_port flags to new port-bitmap fields in usb_hub. "did_runtime_put" is renamed "child_usage_bits" to reflect that it is strictly standing in for the fact that usb_devices are not the device_model children of their parent port. Signed-off-by: Dan Williams Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 39 ++++++++++++++++++++------------------- drivers/usb/core/hub.h | 7 +++---- drivers/usb/core/port.c | 4 ++-- 3 files changed, 25 insertions(+), 25 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5a909ba6fb67..31a492a4a881 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -751,16 +751,20 @@ int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub, int port1, bool set) { int ret; - struct usb_port *port_dev = hub->ports[port1 - 1]; if (set) ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); else ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER); - if (!ret) - port_dev->power_is_on = set; - return ret; + if (ret) + return ret; + + if (set) + set_bit(port1, hub->power_bits); + else + clear_bit(port1, hub->power_bits); + return 0; } /** @@ -839,7 +843,7 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay) dev_dbg(hub->intfdev, "trying to enable port power on " "non-switchable hub\n"); for (port1 = 1; port1 <= hub->hdev->maxchild; port1++) - if (hub->ports[port1 - 1]->power_is_on) + if (test_bit(port1, hub->power_bits)) set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER); else usb_clear_port_feature(hub->hdev, port1, @@ -1180,15 +1184,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) set_bit(port1, hub->change_bits); } else if (udev->persist_enabled) { - struct usb_port *port_dev = hub->ports[port1 - 1]; - #ifdef CONFIG_PM udev->reset_resume = 1; #endif /* Don't set the change_bits when the device * was powered off. */ - if (port_dev->power_is_on) + if (test_bit(port1, hub->power_bits)) set_bit(port1, hub->change_bits); } else { @@ -2096,16 +2098,15 @@ void usb_disconnect(struct usb_device **pdev) usb_hcd_synchronize_unlinks(udev); if (udev->parent) { + int port1 = udev->portnum; struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); - struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + struct usb_port *port_dev = hub->ports[port1 - 1]; sysfs_remove_link(&udev->dev.kobj, "port"); sysfs_remove_link(&port_dev->dev.kobj, "device"); - if (!port_dev->did_runtime_put) + if (test_and_clear_bit(port1, hub->child_usage_bits)) pm_runtime_put(&port_dev->dev); - else - port_dev->did_runtime_put = false; } usb_remove_ep_devs(&udev->ep0); @@ -2416,7 +2417,8 @@ int usb_new_device(struct usb_device *udev) /* Create link files between child device and usb port device. */ if (udev->parent) { struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); - struct usb_port *port_dev = hub->ports[udev->portnum - 1]; + int port1 = udev->portnum; + struct usb_port *port_dev = hub->ports[port1 - 1]; err = sysfs_create_link(&udev->dev.kobj, &port_dev->dev.kobj, "port"); @@ -2430,7 +2432,8 @@ int usb_new_device(struct usb_device *udev) goto fail; } - pm_runtime_get_sync(&port_dev->dev); + if (!test_and_set_bit(port1, hub->child_usage_bits)) + pm_runtime_get_sync(&port_dev->dev); } (void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev); @@ -3100,10 +3103,9 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) usb_set_device_state(udev, USB_STATE_SUSPENDED); } - if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled) { + if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled + && test_and_clear_bit(port1, hub->child_usage_bits)) pm_runtime_put_sync(&port_dev->dev); - port_dev->did_runtime_put = true; - } usb_mark_last_busy(hub->hdev); return status; @@ -3245,9 +3247,8 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) int status; u16 portchange, portstatus; - if (port_dev->did_runtime_put) { + if (!test_and_set_bit(port1, hub->child_usage_bits)) { status = pm_runtime_get_sync(&port_dev->dev); - port_dev->did_runtime_put = false; if (status < 0) { dev_dbg(&udev->dev, "can't resume usb port, status %d\n", status); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 048c797f394c..3ef1c2e435cc 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -51,6 +51,9 @@ struct usb_hub { device present */ unsigned long wakeup_bits[1]; /* ports that have signaled remote wakeup */ + unsigned long power_bits[1]; /* ports that are powered */ + unsigned long child_usage_bits[1]; /* ports powered on for + children */ #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ #error event_bits[] is too short! #endif @@ -86,8 +89,6 @@ struct usb_hub { * @connect_type: port's connect type * @location: opaque representation of platform connector location * @portnum: port index num based one - * @power_is_on: port's power state - * @did_runtime_put: port has done pm_runtime_put(). */ struct usb_port { struct usb_device *child; @@ -97,8 +98,6 @@ struct usb_port { enum usb_port_connect_type connect_type; usb_port_location_t location; u8 portnum; - unsigned power_is_on:1; - unsigned did_runtime_put:1; }; #define to_usb_port(_dev) \ diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 40c3ac173e9e..795778c71e31 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -82,7 +82,7 @@ static int usb_port_runtime_resume(struct device *dev) if (!hub) return -EINVAL; if (hub->in_reset) { - port_dev->power_is_on = 1; + set_bit(port1, hub->power_bits); return 0; } @@ -320,7 +320,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) hub->ports[port1 - 1] = port_dev; port_dev->portnum = port1; - port_dev->power_is_on = true; + set_bit(port1, hub->power_bits); port_dev->dev.parent = hub->intfdev; port_dev->dev.groups = port_dev_group; port_dev->dev.type = &usb_port_device_type; From 7ad3c47088f9faec463f5226e5e968a5c3b0e593 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:08:57 -0700 Subject: [PATCH 289/314] usb: block suspension of superspeed port while hispeed peer is active ClearPortFeature(PORT_POWER) on a usb3 port places the port in either a DSPORT.Powered-off-detect / DSPORT.Powered-off-reset loop, or the DSPORT.Powered-off state. There is no way to ensure that RX terminations will persist in this state, so it is possible a device will degrade to its usb2 connection. Prevent this by blocking power-off of a usb3 port while its usb2 peer is active, and powering on a usb3 port before its usb2 peer. By default the latency between peer power-on events is 0. In order for the device to not see usb2 active while usb3 is still powering up inject the hub recommended power_on_good delay. In support of satisfying the power_on_good delay outside of hub_power_on() refactor the places where the delay is consumed to call a new hub_power_on_good_delay() helper. Finally, because this introduces several new checks for whether a port is_superspeed, cache that disctinction at port creation so that we don't need to keep looking up the parent hub device. Acked-by: Alan Stern [alan]: add a 'superspeed' flag to the port Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 22 +++---------- drivers/usb/core/hub.h | 15 +++++++++ drivers/usb/core/port.c | 73 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 31a492a4a881..e492bca74425 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -36,11 +36,6 @@ #define USB_VENDOR_GENESYS_LOGIC 0x05e3 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 -static inline int hub_is_superspeed(struct usb_device *hdev) -{ - return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS); -} - /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ @@ -822,14 +817,9 @@ int usb_hub_clear_tt_buffer(struct urb *urb) } EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer); -/* If do_delay is false, return the number of milliseconds the caller - * needs to delay. - */ -static unsigned hub_power_on(struct usb_hub *hub, bool do_delay) +static void hub_power_on(struct usb_hub *hub, bool do_delay) { int port1; - unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; - unsigned delay; /* Enable power on each port. Some hubs have reserved values * of LPSM (> 2) in their descriptors, even though they are @@ -848,12 +838,8 @@ static unsigned hub_power_on(struct usb_hub *hub, bool do_delay) else usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER); - - /* Wait at least 100 msec for power to become stable */ - delay = max(pgood_delay, (unsigned) 100); if (do_delay) - msleep(delay); - return delay; + msleep(hub_power_on_good_delay(hub)); } static int hub_hub_status(struct usb_hub *hub, @@ -1057,7 +1043,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) * for HUB_POST_RESET, but it's easier not to. */ if (type == HUB_INIT) { - delay = hub_power_on(hub, false); + unsigned delay = hub_power_on_good_delay(hub); + + hub_power_on(hub, false); INIT_DELAYED_WORK(&hub->init_work, hub_init_func2); queue_delayed_work(system_power_efficient_wq, &hub->init_work, diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 3ef1c2e435cc..906c355e0631 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -89,6 +89,7 @@ struct usb_hub { * @connect_type: port's connect type * @location: opaque representation of platform connector location * @portnum: port index num based one + * @is_superspeed cache super-speed status */ struct usb_port { struct usb_device *child; @@ -98,6 +99,7 @@ struct usb_port { enum usb_port_connect_type connect_type; usb_port_location_t location; u8 portnum; + unsigned int is_superspeed:1; }; #define to_usb_port(_dev) \ @@ -125,6 +127,19 @@ static inline bool hub_is_port_power_switchable(struct usb_hub *hub) return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM; } +static inline int hub_is_superspeed(struct usb_device *hdev) +{ + return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS; +} + +static inline unsigned hub_power_on_good_delay(struct usb_hub *hub) +{ + unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2; + + /* Wait at least 100 msec for power to become stable */ + return max(delay, 100U); +} + static inline int hub_port_debounce_be_connected(struct usb_hub *hub, int port1) { diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 795778c71e31..827b0d38f73d 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -76,6 +76,7 @@ static int usb_port_runtime_resume(struct device *dev) struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_interface *intf = to_usb_interface(dev->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_port *peer = port_dev->peer; int port1 = port_dev->portnum; int retval; @@ -86,10 +87,18 @@ static int usb_port_runtime_resume(struct device *dev) return 0; } + /* + * Power on our usb3 peer before this usb2 port to prevent a usb3 + * device from degrading to its usb2 connection + */ + if (!port_dev->is_superspeed && peer) + pm_runtime_get_sync(&peer->dev); + usb_autopm_get_interface(intf); set_bit(port1, hub->busy_bits); retval = usb_hub_set_port_power(hdev, hub, port1, true); + msleep(hub_power_on_good_delay(hub)); if (port_dev->child && !retval) { /* * Attempt to wait for usb hub port to be reconnected in order @@ -107,6 +116,7 @@ static int usb_port_runtime_resume(struct device *dev) clear_bit(port1, hub->busy_bits); usb_autopm_put_interface(intf); + return retval; } @@ -116,6 +126,7 @@ static int usb_port_runtime_suspend(struct device *dev) struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_interface *intf = to_usb_interface(dev->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_port *peer = port_dev->peer; int port1 = port_dev->portnum; int retval; @@ -135,6 +146,15 @@ static int usb_port_runtime_suspend(struct device *dev) usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); clear_bit(port1, hub->busy_bits); usb_autopm_put_interface(intf); + + /* + * Our peer usb3 port may now be able to suspend, so + * asynchronously queue a suspend request to observe that this + * usb2 port is now off. + */ + if (!port_dev->is_superspeed && peer) + pm_runtime_put(&peer->dev); + return retval; } #endif @@ -159,6 +179,7 @@ static struct device_driver usb_port_driver = { static int link_peers(struct usb_port *left, struct usb_port *right) { + struct usb_port *ss_port, *hs_port; int rc; if (left->peer == right && right->peer == left) @@ -184,9 +205,36 @@ static int link_peers(struct usb_port *left, struct usb_port *right) return rc; } + /* + * We need to wake the HiSpeed port to make sure we don't race + * setting ->peer with usb_port_runtime_suspend(). Otherwise we + * may miss a suspend event for the SuperSpeed port. + */ + if (left->is_superspeed) { + ss_port = left; + WARN_ON(right->is_superspeed); + hs_port = right; + } else { + ss_port = right; + WARN_ON(!right->is_superspeed); + hs_port = left; + } + pm_runtime_get_sync(&hs_port->dev); + left->peer = right; right->peer = left; + /* + * The SuperSpeed reference is dropped when the HiSpeed port in + * this relationship suspends, i.e. when it is safe to allow a + * SuperSpeed connection to drop since there is no risk of a + * device degrading to its powered-off HiSpeed connection. + * + * Also, drop the HiSpeed ref taken above. + */ + pm_runtime_get_sync(&ss_port->dev); + pm_runtime_put(&hs_port->dev); + return 0; } @@ -206,14 +254,37 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right) static void unlink_peers(struct usb_port *left, struct usb_port *right) { + struct usb_port *ss_port, *hs_port; + WARN(right->peer != left || left->peer != right, "%s and %s are not peers?\n", dev_name(&left->dev), dev_name(&right->dev)); + /* + * We wake the HiSpeed port to make sure we don't race its + * usb_port_runtime_resume() event which takes a SuperSpeed ref + * when ->peer is !NULL. + */ + if (left->is_superspeed) { + ss_port = left; + hs_port = right; + } else { + ss_port = right; + hs_port = left; + } + + pm_runtime_get_sync(&hs_port->dev); + sysfs_remove_link(&left->dev.kobj, "peer"); right->peer = NULL; sysfs_remove_link(&right->dev.kobj, "peer"); left->peer = NULL; + + /* Drop the SuperSpeed ref held on behalf of the active HiSpeed port */ + pm_runtime_put(&ss_port->dev); + + /* Drop the ref taken above */ + pm_runtime_put(&hs_port->dev); } /* @@ -325,6 +396,8 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) port_dev->dev.groups = port_dev_group; port_dev->dev.type = &usb_port_device_type; port_dev->dev.driver = &usb_port_driver; + if (hub_is_superspeed(hub->hdev)) + port_dev->is_superspeed = 1; dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev), port1); retval = device_register(&port_dev->dev); From 7c604079bdf729e7b8c4b0e67c688b5081d1863d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:03 -0700 Subject: [PATCH 290/314] usb: don't clear FEAT_C_ENABLE on usb_port_runtime_resume failure Three reasons: 1/ It's an invalid operation on usb3 ports 2/ There's no guarantee of when / if a usb2 port has entered an error state relative to PORT_POWER request 3/ The port is active / powered at this point, so khubd will clear it as a matter of course Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 827b0d38f73d..f41f0512307e 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -110,7 +110,6 @@ static int usb_port_runtime_resume(struct device *dev) if (retval < 0) dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n", retval); - usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); retval = 0; } From 6908058469e3253637894d1cb3e2581870c77e1d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:10 -0700 Subject: [PATCH 291/314] usb: usb3 ports do not support FEAT_C_ENABLE The port pm_runtime implementation unconditionally clears FEAT_C_ENABLE after clearing PORT_POWER, but the bit is reserved on usb3 hub ports. We expect khubd to be prevented from running because the port state is not RPM_ACTIVE, so we need to clear any errors for usb2 ports. Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index f41f0512307e..fb83c2c13920 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -142,7 +142,8 @@ static int usb_port_runtime_suspend(struct device *dev) set_bit(port1, hub->busy_bits); retval = usb_hub_set_port_power(hdev, hub, port1, false); usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); - usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + if (!port_dev->is_superspeed) + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); clear_bit(port1, hub->busy_bits); usb_autopm_put_interface(intf); From af376a461cf075de6358255579c8d42bb1246e18 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:15 -0700 Subject: [PATCH 292/314] usb: refactor port handling in hub_events() In preparation for synchronizing port handling with pm_runtime transitions refactor port handling into its own subroutine. We expect that clearing some status flags will be required regardless of the port state, so handle those first and group all non-trivial actions at the bottom of the routine. This also splits off the bottom half of hub_port_connect_change() into hub_port_reconnect() in prepartion for introducing a port->status_lock. hub_port_reconnect() will expect the port lock to not be held while hub_port_connect_change() expects to enter with it held. Other cleanups include: 1/ reflowing to 80 columns 2/ replacing redundant usages of 'hub->hdev' with 'hdev' 3/ consolidate clearing of ->change_bits() in hub_port_connect_change 4/ consolidate calls to usb_reset_device Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 374 ++++++++++++++++++++--------------------- 1 file changed, 185 insertions(+), 189 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e492bca74425..782ce2e31c7f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4413,66 +4413,15 @@ hub_power_remaining (struct usb_hub *hub) return remaining; } -/* Handle physical or logical connection change events. - * This routine is called when: - * a port connection-change occurs; - * a port enable-change occurs (often caused by EMI); - * usb_reset_and_verify_device() encounters changed descriptors (as from - * a firmware download) - * caller already locked the hub - */ -static void hub_port_connect_change(struct usb_hub *hub, int port1, - u16 portstatus, u16 portchange) +static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, + u16 portchange) { + int status, i; + unsigned unit_load; struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); struct usb_port *port_dev = hub->ports[port1 - 1]; - struct usb_device *udev; - int status, i; - unsigned unit_load; - - dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", - portstatus, portchange, portspeed(hub, portstatus)); - - if (hub->has_indicators) { - set_port_led(hub, port1, HUB_LED_AUTO); - hub->indicator[port1-1] = INDICATOR_AUTO; - } - -#ifdef CONFIG_USB_OTG - /* during HNP, don't repeat the debounce */ - if (hdev->bus->is_b_host) - portchange &= ~(USB_PORT_STAT_C_CONNECTION | - USB_PORT_STAT_C_ENABLE); -#endif - - /* Try to resuscitate an existing device */ - udev = port_dev->child; - if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && - udev->state != USB_STATE_NOTATTACHED) { - usb_lock_device(udev); - if (portstatus & USB_PORT_STAT_ENABLE) { - status = 0; /* Nothing to do */ - -#ifdef CONFIG_PM_RUNTIME - } else if (udev->state == USB_STATE_SUSPENDED && - udev->persist_enabled) { - /* For a suspended device, treat this as a - * remote wakeup event. - */ - status = usb_remote_wakeup(udev); -#endif - - } else { - status = -ENODEV; /* Don't resuscitate */ - } - usb_unlock_device(udev); - - if (status == 0) { - clear_bit(port1, hub->change_bits); - return; - } - } + struct usb_device *udev = port_dev->child; /* Disconnect any existing devices under this port */ if (udev) { @@ -4481,7 +4430,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_phy_notify_disconnect(hcd->phy, udev->speed); usb_disconnect(&port_dev->child); } - clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical * disconnect or the connect status changes. @@ -4663,6 +4611,65 @@ done: hub_port_disable(hub, port1, 1); if (hcd->driver->relinquish_port && !hub->hdev->parent) hcd->driver->relinquish_port(hcd, port1); + +} + +/* Handle physical or logical connection change events. + * This routine is called when: + * a port connection-change occurs; + * a port enable-change occurs (often caused by EMI); + * usb_reset_and_verify_device() encounters changed descriptors (as from + * a firmware download) + * caller already locked the hub + */ +static void hub_port_connect_change(struct usb_hub *hub, int port1, + u16 portstatus, u16 portchange) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + int status = -ENODEV; + + dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus, + portchange, portspeed(hub, portstatus)); + + if (hub->has_indicators) { + set_port_led(hub, port1, HUB_LED_AUTO); + hub->indicator[port1-1] = INDICATOR_AUTO; + } + +#ifdef CONFIG_USB_OTG + /* during HNP, don't repeat the debounce */ + if (hub->hdev->bus->is_b_host) + portchange &= ~(USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE); +#endif + + /* Try to resuscitate an existing device */ + if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && + udev->state != USB_STATE_NOTATTACHED) { + if (portstatus & USB_PORT_STAT_ENABLE) { + status = 0; /* Nothing to do */ +#ifdef CONFIG_PM_RUNTIME + } else if (udev->state == USB_STATE_SUSPENDED && + udev->persist_enabled) { + /* For a suspended device, treat this as a + * remote wakeup event. + */ + usb_lock_device(udev); + status = usb_remote_wakeup(udev); + usb_unlock_device(udev); +#endif + } else { + /* Don't resuscitate */; + } + + } + clear_bit(port1, hub->change_bits); + + if (status == 0) + return; + + hub_port_connect(hub, port1, portstatus, portchange); } /* Returns 1 if there was a remote wakeup and a connect status change. */ @@ -4705,6 +4712,121 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, return connect_change; } +static void port_event(struct usb_hub *hub, int port1) +{ + int connect_change, reset_device = 0; + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *udev = port_dev->child; + struct usb_device *hdev = hub->hdev; + u16 portstatus, portchange; + + connect_change = test_bit(port1, hub->change_bits); + clear_bit(port1, hub->event_bits); + clear_bit(port1, hub->wakeup_bits); + + if (hub_port_status(hub, port1, &portstatus, &portchange) < 0) + return; + + if (portchange & USB_PORT_STAT_C_CONNECTION) { + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); + connect_change = 1; + } + + if (portchange & USB_PORT_STAT_C_ENABLE) { + if (!connect_change) + dev_dbg(&port_dev->dev, "enable change, status %08x\n", + portstatus); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); + + /* + * EM interference sometimes causes badly shielded USB devices + * to be shutdown by the hub, this hack enables them again. + * Works at least with mouse driver. + */ + if (!(portstatus & USB_PORT_STAT_ENABLE) + && !connect_change && udev) { + dev_err(&port_dev->dev, "disabled by hub (EMI?), re-enabling...\n"); + connect_change = 1; + } + } + + if (portchange & USB_PORT_STAT_C_OVERCURRENT) { + u16 status = 0, unused; + + dev_dbg(&port_dev->dev, "over-current change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_OVER_CURRENT); + msleep(100); /* Cool down */ + hub_power_on(hub, true); + hub_port_status(hub, port1, &status, &unused); + if (status & USB_PORT_STAT_OVERCURRENT) + dev_err(&port_dev->dev, "over-current condition\n"); + } + + if (portchange & USB_PORT_STAT_C_RESET) { + dev_dbg(&port_dev->dev, "reset change\n"); + usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_RESET); + } + if ((portchange & USB_PORT_STAT_C_BH_RESET) + && hub_is_superspeed(hdev)) { + dev_dbg(&port_dev->dev, "warm reset change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } + if (portchange & USB_PORT_STAT_C_LINK_STATE) { + dev_dbg(&port_dev->dev, "link state change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + } + if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) { + dev_warn(&port_dev->dev, "config error\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_PORT_CONFIG_ERROR); + } + + if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange)) + connect_change = 1; + + /* + * Warm reset a USB3 protocol port if it's in + * SS.Inactive state. + */ + if (hub_port_warm_reset_required(hub, portstatus)) { + dev_dbg(&port_dev->dev, "do warm reset\n"); + if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) + || udev->state == USB_STATE_NOTATTACHED) { + if (hub_port_reset(hub, port1, NULL, + HUB_BH_RESET_TIME, true) < 0) + hub_port_disable(hub, port1, 1); + } else + reset_device = 1; + } + + /* + * On disconnect USB3 protocol ports transit from U0 to + * SS.Inactive to Rx.Detect. If this happens a warm- + * reset is not needed, but a (re)connect may happen + * before khubd runs and sees the disconnect, and the + * device may be an unknown state. + * + * If the port went through SS.Inactive without khubd + * seeing it the C_LINK_STATE change flag will be set, + * and we reset the dev to put it in a known state. + */ + if (reset_device || (udev && hub_is_superspeed(hub->hdev) + && (portchange & USB_PORT_STAT_C_LINK_STATE) + && (portstatus & USB_PORT_STAT_CONNECTION))) { + usb_lock_device(udev); + usb_reset_device(udev); + usb_unlock_device(udev); + connect_change = 0; + } + + if (connect_change) + hub_port_connect_change(hub, port1, portstatus, portchange); +} + + static void hub_events(void) { struct list_head *tmp; @@ -4714,10 +4836,7 @@ static void hub_events(void) struct device *hub_dev; u16 hubstatus; u16 hubchange; - u16 portstatus; - u16 portchange; int i, ret; - int connect_change, wakeup_change; /* * We restart the list every time to avoid a deadlock with @@ -4791,135 +4910,12 @@ static void hub_events(void) /* deal with port status changes */ for (i = 1; i <= hdev->maxchild; i++) { - struct usb_port *port_dev = hub->ports[i - 1]; - struct usb_device *udev = port_dev->child; - - if (test_bit(i, hub->busy_bits)) - continue; - connect_change = test_bit(i, hub->change_bits); - wakeup_change = test_and_clear_bit(i, hub->wakeup_bits); - if (!test_and_clear_bit(i, hub->event_bits) && - !connect_change && !wakeup_change) - continue; - - ret = hub_port_status(hub, i, - &portstatus, &portchange); - if (ret < 0) - continue; - - if (portchange & USB_PORT_STAT_C_CONNECTION) { - usb_clear_port_feature(hdev, i, - USB_PORT_FEAT_C_CONNECTION); - connect_change = 1; - } - - if (portchange & USB_PORT_STAT_C_ENABLE) { - if (!connect_change) - dev_dbg(&port_dev->dev, - "enable change, status %08x\n", - portstatus); - usb_clear_port_feature(hdev, i, - USB_PORT_FEAT_C_ENABLE); - - /* - * EM interference sometimes causes badly - * shielded USB devices to be shutdown by - * the hub, this hack enables them again. - * Works at least with mouse driver. - */ - if (!(portstatus & USB_PORT_STAT_ENABLE) - && !connect_change && udev) { - dev_err(&port_dev->dev, - "disabled by hub (EMI?), re-enabling...\n"); - connect_change = 1; - } - } - - if (hub_handle_remote_wakeup(hub, i, - portstatus, portchange)) - connect_change = 1; - - if (portchange & USB_PORT_STAT_C_OVERCURRENT) { - u16 status = 0; - u16 unused; - - dev_dbg(&port_dev->dev, "over-current change\n"); - usb_clear_port_feature(hdev, i, - USB_PORT_FEAT_C_OVER_CURRENT); - msleep(100); /* Cool down */ - hub_power_on(hub, true); - hub_port_status(hub, i, &status, &unused); - if (status & USB_PORT_STAT_OVERCURRENT) - dev_err(&port_dev->dev, - "over-current condition\n"); - } - - if (portchange & USB_PORT_STAT_C_RESET) { - dev_dbg(&port_dev->dev, "reset change\n"); - usb_clear_port_feature(hdev, i, - USB_PORT_FEAT_C_RESET); - } - if ((portchange & USB_PORT_STAT_C_BH_RESET) && - hub_is_superspeed(hub->hdev)) { - dev_dbg(&port_dev->dev, "warm reset change\n"); - usb_clear_port_feature(hdev, i, - USB_PORT_FEAT_C_BH_PORT_RESET); - } - if (portchange & USB_PORT_STAT_C_LINK_STATE) { - usb_clear_port_feature(hub->hdev, i, - USB_PORT_FEAT_C_PORT_LINK_STATE); - } - if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) { - dev_warn(&port_dev->dev, "config error\n"); - usb_clear_port_feature(hub->hdev, i, - USB_PORT_FEAT_C_PORT_CONFIG_ERROR); - } - - /* Warm reset a USB3 protocol port if it's in - * SS.Inactive state. - */ - if (hub_port_warm_reset_required(hub, portstatus)) { - int status; - - dev_dbg(&port_dev->dev, "warm reset\n"); - if (!udev || - !(portstatus & USB_PORT_STAT_CONNECTION) || - udev->state == USB_STATE_NOTATTACHED) { - status = hub_port_reset(hub, i, - NULL, HUB_BH_RESET_TIME, - true); - if (status < 0) - hub_port_disable(hub, i, 1); - } else { - usb_lock_device(udev); - status = usb_reset_device(udev); - usb_unlock_device(udev); - connect_change = 0; - } - /* - * On disconnect USB3 protocol ports transit from U0 to - * SS.Inactive to Rx.Detect. If this happens a warm- - * reset is not needed, but a (re)connect may happen - * before khubd runs and sees the disconnect, and the - * device may be an unknown state. - * - * If the port went through SS.Inactive without khubd - * seeing it the C_LINK_STATE change flag will be set, - * and we reset the dev to put it in a known state. - */ - } else if (udev && hub_is_superspeed(hub->hdev) && - (portchange & USB_PORT_STAT_C_LINK_STATE) && - (portstatus & USB_PORT_STAT_CONNECTION)) { - usb_lock_device(udev); - usb_reset_device(udev); - usb_unlock_device(udev); - connect_change = 0; - } - - if (connect_change) - hub_port_connect_change(hub, i, - portstatus, portchange); - } /* end for i */ + if (!test_bit(i, hub->busy_bits) + && (test_bit(i, hub->event_bits) + || test_bit(i, hub->change_bits) + || test_bit(i, hub->wakeup_bits))) + port_event(hub, i); + } /* deal with hub status changes */ if (test_and_clear_bit(0, hub->event_bits) == 0) From 097a155f05e88dc71184ceb93ad1aab1a13d1e41 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:20 -0700 Subject: [PATCH 293/314] usb: synchronize port poweroff and khubd If a port is powered-off, or in the process of being powered-off, prevent khubd from operating on it. Otherwise, the following sequence of events leading to an unintended disconnect may occur: Events: (0) (1) hub 2-2:1.0: hub_resume (2) hub 2-2:1.0: port 1: status 0301 change 0000 (3) hub 2-2:1.0: state 7 ports 4 chg 0002 evt 0000 (4) hub 2-2:1.0: port 1, power off status 0000, change 0000, 12 Mb/s (5) usb 2-2.1: USB disconnect, device number 5 Description: (1) hub is resumed before sending a ClearPortFeature request (2) hub_activate() notices the port is connected and sets hub->change_bits for the port (3) hub_events() starts, but at the same time the port suspends (4) hub_connect_change() sees the disabled port and triggers disconnect Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 782ce2e31c7f..988f227e796f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4784,6 +4784,10 @@ static void port_event(struct usb_hub *hub, int port1) USB_PORT_FEAT_C_PORT_CONFIG_ERROR); } + /* skip port actions that require the port to be powered on */ + if (!pm_runtime_active(&port_dev->dev)) + return; + if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange)) connect_change = 1; @@ -4910,11 +4914,26 @@ static void hub_events(void) /* deal with port status changes */ for (i = 1; i <= hdev->maxchild; i++) { + struct usb_port *port_dev = hub->ports[i - 1]; + if (!test_bit(i, hub->busy_bits) && (test_bit(i, hub->event_bits) || test_bit(i, hub->change_bits) - || test_bit(i, hub->wakeup_bits))) + || test_bit(i, hub->wakeup_bits))) { + /* + * The get_noresume and barrier ensure that if + * the port was in the process of resuming, we + * flush that work and keep the port active for + * the duration of the port_event(). However, + * if the port is runtime pm suspended + * (powered-off), we leave it in that state, run + * an abbreviated port_event(), and move on. + */ + pm_runtime_get_noresume(&port_dev->dev); + pm_runtime_barrier(&port_dev->dev); port_event(hub, i); + pm_runtime_put_sync(&port_dev->dev); + } } /* deal with hub status changes */ From 5c79a1e303363d46082408fd306cdea6d33013fc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:26 -0700 Subject: [PATCH 294/314] usb: introduce port status lock In general we do not want khubd to act on port status changes that are the result of in progress resets or USB runtime PM operations. Specifically port power control testing has been able to trigger an unintended disconnect in hub_port_connect_change(), paraphrasing: if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { if (portstatus & USB_PORT_STAT_ENABLE) { /* Nothing to do */ } else if (udev->state == USB_STATE_SUSPENDED && udev->persist_enabled) { ... } else { /* Don't resuscitate */; } } ...by falling to the "Don't resuscitate" path or missing USB_PORT_STAT_CONNECTION because usb_port_resume() was in the middle of modifying the port status. So, we want a new lock to hold off khubd for a given port while the child device is being suspended, resumed, or reset. The lock ordering rules are now usb_lock_device() => usb_lock_port(). This is mandated by the device core which may hold the device_lock on the usb_device before invoking usb_port_{suspend|resume} which in turn take the status_lock on the usb_port. We attempt to hold the status_lock for the duration of a port_event() run, and drop/re-acquire it when needing to take the device_lock. The lock is also dropped/re-acquired during hub_port_reconnect(). This patch also deletes hub->busy_bits as all use cases are now covered by port PM runtime synchronization or the port->status_lock and it pushes down usb_device_lock() into usb_remote_wakeup(). Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 - drivers/usb/core/hub.c | 97 +++++++++++++++++++++++++++++------------ drivers/usb/core/hub.h | 4 +- drivers/usb/core/port.c | 6 +-- 4 files changed, 72 insertions(+), 37 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b81407518fdf..bec31e2efb88 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2267,9 +2267,7 @@ static void hcd_resume_work(struct work_struct *work) struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work); struct usb_device *udev = hcd->self.root_hub; - usb_lock_device(udev); usb_remote_wakeup(udev); - usb_unlock_device(udev); } /** diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 988f227e796f..d43054e8e257 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2781,6 +2781,20 @@ static int port_is_power_on(struct usb_hub *hub, unsigned portstatus) return ret; } +static void usb_lock_port(struct usb_port *port_dev) + __acquires(&port_dev->status_lock) +{ + mutex_lock(&port_dev->status_lock); + __acquire(&port_dev->status_lock); +} + +static void usb_unlock_port(struct usb_port *port_dev) + __releases(&port_dev->status_lock) +{ + mutex_unlock(&port_dev->status_lock); + __release(&port_dev->status_lock); +} + #ifdef CONFIG_PM /* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */ @@ -3003,6 +3017,8 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) int status; bool really_suspend = true; + usb_lock_port(port_dev); + /* enable remote wakeup when appropriate; this lets the device * wake up the upstream hub (including maybe the root hub). * @@ -3096,6 +3112,8 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) pm_runtime_put_sync(&port_dev->dev); usb_mark_last_busy(hub->hdev); + + usb_unlock_port(port_dev); return status; } @@ -3244,13 +3262,13 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } } + usb_lock_port(port_dev); + /* Skip the initial Clear-Suspend step for a remote wakeup */ status = hub_port_status(hub, port1, &portstatus, &portchange); if (status == 0 && !port_is_suspended(hub, portstatus)) goto SuspendCleared; - set_bit(port1, hub->busy_bits); - /* see 7.1.7.7; affects power usage, but not budgeting */ if (hub_is_superspeed(hub->hdev)) status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0); @@ -3289,8 +3307,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } } - clear_bit(port1, hub->busy_bits); - status = check_port_resume_type(udev, hub, port1, status, portchange, portstatus); if (status == 0) @@ -3308,16 +3324,18 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) usb_unlocked_enable_lpm(udev); } + usb_unlock_port(port_dev); + return status; } #ifdef CONFIG_PM_RUNTIME -/* caller has locked udev */ int usb_remote_wakeup(struct usb_device *udev) { int status = 0; + usb_lock_device(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); status = usb_autoresume_device(udev); @@ -3326,6 +3344,7 @@ int usb_remote_wakeup(struct usb_device *udev) usb_autosuspend_device(udev); } } + usb_unlock_device(udev); return status; } @@ -4030,9 +4049,10 @@ static int hub_enable_device(struct usb_device *udev) * Returns device in USB_STATE_ADDRESS, except on error. * * If this is called for an already-existing device (as part of - * usb_reset_and_verify_device), the caller must own the device lock. For a - * newly detected device that is not accessible through any global - * pointers, it's not necessary to lock the device. + * usb_reset_and_verify_device), the caller must own the device lock and + * the port lock. For a newly detected device that is not accessible + * through any global pointers, it's not necessary to lock the device, + * but it is still necessary to lock the port. */ static int hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, @@ -4502,7 +4522,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, } /* reset (non-USB 3.0 devices) and get descriptor */ + usb_lock_port(port_dev); status = hub_port_init(hub, udev, port1, i); + usb_unlock_port(port_dev); if (status < 0) goto loop; @@ -4624,6 +4646,7 @@ done: */ static void hub_port_connect_change(struct usb_hub *hub, int port1, u16 portstatus, u16 portchange) + __must_hold(&port_dev->status_lock) { struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *udev = port_dev->child; @@ -4655,26 +4678,29 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* For a suspended device, treat this as a * remote wakeup event. */ - usb_lock_device(udev); + usb_unlock_port(port_dev); status = usb_remote_wakeup(udev); - usb_unlock_device(udev); + usb_lock_port(port_dev); #endif } else { /* Don't resuscitate */; } - } clear_bit(port1, hub->change_bits); + /* successfully revalidated the connection */ if (status == 0) return; + usb_unlock_port(port_dev); hub_port_connect(hub, port1, portstatus, portchange); + usb_lock_port(port_dev); } /* Returns 1 if there was a remote wakeup and a connect status change. */ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, u16 portstatus, u16 portchange) + __must_hold(&port_dev->status_lock) { struct usb_port *port_dev = hub->ports[port - 1]; struct usb_device *hdev; @@ -4699,9 +4725,9 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, /* TRSMRCY = 10 msec */ msleep(10); - usb_lock_device(udev); + usb_unlock_port(port_dev); ret = usb_remote_wakeup(udev); - usb_unlock_device(udev); + usb_lock_port(port_dev); if (ret < 0) connect_change = 1; } else { @@ -4713,6 +4739,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, } static void port_event(struct usb_hub *hub, int port1) + __must_hold(&port_dev->status_lock) { int connect_change, reset_device = 0; struct usb_port *port_dev = hub->ports[port1 - 1]; @@ -4820,9 +4847,11 @@ static void port_event(struct usb_hub *hub, int port1) if (reset_device || (udev && hub_is_superspeed(hub->hdev) && (portchange & USB_PORT_STAT_C_LINK_STATE) && (portstatus & USB_PORT_STAT_CONNECTION))) { + usb_unlock_port(port_dev); usb_lock_device(udev); usb_reset_device(udev); usb_unlock_device(udev); + usb_lock_port(port_dev); connect_change = 0; } @@ -4916,10 +4945,9 @@ static void hub_events(void) for (i = 1; i <= hdev->maxchild; i++) { struct usb_port *port_dev = hub->ports[i - 1]; - if (!test_bit(i, hub->busy_bits) - && (test_bit(i, hub->event_bits) - || test_bit(i, hub->change_bits) - || test_bit(i, hub->wakeup_bits))) { + if (test_bit(i, hub->event_bits) + || test_bit(i, hub->change_bits) + || test_bit(i, hub->wakeup_bits)) { /* * The get_noresume and barrier ensure that if * the port was in the process of resuming, we @@ -4931,7 +4959,9 @@ static void hub_events(void) */ pm_runtime_get_noresume(&port_dev->dev); pm_runtime_barrier(&port_dev->dev); + usb_lock_port(port_dev); port_event(hub, i); + usb_unlock_port(port_dev); pm_runtime_put_sync(&port_dev->dev); } } @@ -5169,15 +5199,18 @@ static int descriptors_changed(struct usb_device *udev, * if the reset wasn't even attempted. * * Note: - * The caller must own the device lock. For example, it's safe to use - * this from a driver probe() routine after downloading new firmware. - * For calls that might not occur during probe(), drivers should lock - * the device using usb_lock_device_for_reset(). + * The caller must own the device lock and the port lock, the latter is + * taken by usb_reset_device(). For example, it's safe to use + * usb_reset_device() from a driver probe() routine after downloading + * new firmware. For calls that might not occur during probe(), drivers + * should lock the device using usb_lock_device_for_reset(). * * Locking exception: This routine may also be called from within an * autoresume handler. Such usage won't conflict with other tasks * holding the device lock because these tasks should always call - * usb_autopm_resume_device(), thereby preventing any unwanted autoresume. + * usb_autopm_resume_device(), thereby preventing any unwanted + * autoresume. The autoresume handler is expected to have already + * acquired the port lock before calling this routine. */ static int usb_reset_and_verify_device(struct usb_device *udev) { @@ -5196,11 +5229,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) return -EINVAL; } - if (!parent_hdev) { - /* this requires hcd-specific logic; see ohci_restart() */ - dev_dbg(&udev->dev, "%s for root hub!\n", __func__); + if (!parent_hdev) return -EISDIR; - } + parent_hub = usb_hub_to_struct_hub(parent_hdev); /* Disable USB2 hardware LPM. @@ -5229,7 +5260,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) goto re_enumerate; } - set_bit(port1, parent_hub->busy_bits); for (i = 0; i < SET_CONFIG_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. @@ -5239,7 +5269,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV) break; } - clear_bit(port1, parent_hub->busy_bits); if (ret < 0) goto re_enumerate; @@ -5360,7 +5389,9 @@ int usb_reset_device(struct usb_device *udev) int ret; int i; unsigned int noio_flag; + struct usb_port *port_dev; struct usb_host_config *config = udev->actconfig; + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); if (udev->state == USB_STATE_NOTATTACHED || udev->state == USB_STATE_SUSPENDED) { @@ -5369,6 +5400,14 @@ int usb_reset_device(struct usb_device *udev) return -EINVAL; } + if (!udev->parent) { + /* this requires hcd-specific logic; see ohci_restart() */ + dev_dbg(&udev->dev, "%s for root hub!\n", __func__); + return -EISDIR; + } + + port_dev = hub->ports[udev->portnum - 1]; + /* * Don't allocate memory with GFP_KERNEL in current * context to avoid possible deadlock if usb mass @@ -5402,7 +5441,9 @@ int usb_reset_device(struct usb_device *udev) } } + usb_lock_port(port_dev); ret = usb_reset_and_verify_device(udev); + usb_unlock_port(port_dev); if (config) { for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) { diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 906c355e0631..0a7cdc0ef0a9 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -45,8 +45,6 @@ struct usb_hub { unsigned long event_bits[1]; /* status change bitmask */ unsigned long change_bits[1]; /* ports with logical connect status change */ - unsigned long busy_bits[1]; /* ports being reset or - resumed */ unsigned long removed_bits[1]; /* ports with a "removed" device present */ unsigned long wakeup_bits[1]; /* ports that have signaled @@ -88,6 +86,7 @@ struct usb_hub { * @peer: related usb2 and usb3 ports (share the same connector) * @connect_type: port's connect type * @location: opaque representation of platform connector location + * @status_lock: synchronize port_event() vs usb_port_{suspend|resume} * @portnum: port index num based one * @is_superspeed cache super-speed status */ @@ -98,6 +97,7 @@ struct usb_port { struct usb_port *peer; enum usb_port_connect_type connect_type; usb_port_location_t location; + struct mutex status_lock; u8 portnum; unsigned int is_superspeed:1; }; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index fb83c2c13920..8b1655700104 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -95,8 +95,6 @@ static int usb_port_runtime_resume(struct device *dev) pm_runtime_get_sync(&peer->dev); usb_autopm_get_interface(intf); - set_bit(port1, hub->busy_bits); - retval = usb_hub_set_port_power(hdev, hub, port1, true); msleep(hub_power_on_good_delay(hub)); if (port_dev->child && !retval) { @@ -113,7 +111,6 @@ static int usb_port_runtime_resume(struct device *dev) retval = 0; } - clear_bit(port1, hub->busy_bits); usb_autopm_put_interface(intf); return retval; @@ -139,12 +136,10 @@ static int usb_port_runtime_suspend(struct device *dev) return -EAGAIN; usb_autopm_get_interface(intf); - set_bit(port1, hub->busy_bits); retval = usb_hub_set_port_power(hdev, hub, port1, false); usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION); if (!port_dev->is_superspeed) usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); - clear_bit(port1, hub->busy_bits); usb_autopm_put_interface(intf); /* @@ -400,6 +395,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) port_dev->is_superspeed = 1; dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev), port1); + mutex_init(&port_dev->status_lock); retval = device_register(&port_dev->dev); if (retval) goto error_register; From 7e73be227b1510a2ba1391185be7cc357e2226ef Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:31 -0700 Subject: [PATCH 295/314] usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y Per Alan: "You mean from within hub_handle_remote_wakeup()? That routine will never get called if CONFIG_PM_RUNTIME isn't enabled, because khubd never sees wakeup requests if they arise during system suspend. In fact, that routine ought to go inside the "#ifdef CONFIG_PM_RUNTIME" portion of hub.c, along with the other suspend/resume code." Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 90 +++++++++++++++++++++++------------------- drivers/usb/core/usb.h | 5 --- 2 files changed, 49 insertions(+), 46 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d43054e8e257..28f5bbae35e0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3348,6 +3348,55 @@ int usb_remote_wakeup(struct usb_device *udev) return status; } +/* Returns 1 if there was a remote wakeup and a connect status change. */ +static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, + u16 portstatus, u16 portchange) + __must_hold(&port_dev->status_lock) +{ + struct usb_port *port_dev = hub->ports[port - 1]; + struct usb_device *hdev; + struct usb_device *udev; + int connect_change = 0; + int ret; + + hdev = hub->hdev; + udev = port_dev->child; + if (!hub_is_superspeed(hdev)) { + if (!(portchange & USB_PORT_STAT_C_SUSPEND)) + return 0; + usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); + } else { + if (!udev || udev->state != USB_STATE_SUSPENDED || + (portstatus & USB_PORT_STAT_LINK_STATE) != + USB_SS_PORT_LS_U0) + return 0; + } + + if (udev) { + /* TRSMRCY = 10 msec */ + msleep(10); + + usb_unlock_port(port_dev); + ret = usb_remote_wakeup(udev); + usb_lock_port(port_dev); + if (ret < 0) + connect_change = 1; + } else { + ret = -ENODEV; + hub_port_disable(hub, port, 1); + } + dev_dbg(&port_dev->dev, "resume, status %d\n", ret); + return connect_change; +} + +#else + +static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, + u16 portstatus, u16 portchange) +{ + return 0; +} + #endif static int check_ports_changed(struct usb_hub *hub) @@ -4697,47 +4746,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_lock_port(port_dev); } -/* Returns 1 if there was a remote wakeup and a connect status change. */ -static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, - u16 portstatus, u16 portchange) - __must_hold(&port_dev->status_lock) -{ - struct usb_port *port_dev = hub->ports[port - 1]; - struct usb_device *hdev; - struct usb_device *udev; - int connect_change = 0; - int ret; - - hdev = hub->hdev; - udev = port_dev->child; - if (!hub_is_superspeed(hdev)) { - if (!(portchange & USB_PORT_STAT_C_SUSPEND)) - return 0; - usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); - } else { - if (!udev || udev->state != USB_STATE_SUSPENDED || - (portstatus & USB_PORT_STAT_LINK_STATE) != - USB_SS_PORT_LS_U0) - return 0; - } - - if (udev) { - /* TRSMRCY = 10 msec */ - msleep(10); - - usb_unlock_port(port_dev); - ret = usb_remote_wakeup(udev); - usb_lock_port(port_dev); - if (ret < 0) - connect_change = 1; - } else { - ret = -ENODEV; - hub_port_disable(hub, port, 1); - } - dev_dbg(&port_dev->dev, "resume, status %d\n", ret); - return connect_change; -} - static void port_event(struct usb_hub *hub, int port1) __must_hold(&port_dev->status_lock) { diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 98dc08e13448..d9d08720c386 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -107,11 +107,6 @@ static inline int usb_autoresume_device(struct usb_device *udev) return 0; } -static inline int usb_remote_wakeup(struct usb_device *udev) -{ - return 0; -} - static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) { return 0; From 7027df36e41836b11f01b0d30eee40c55df7d013 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 May 2014 18:09:36 -0700 Subject: [PATCH 296/314] usb: resume child device when port is powered on Unconditionally wake up the child device when the power session is recovered. This addresses the following scenarios: 1/ The device may need a reset on power-session loss, without this change port power-on recovery exposes khubd to scenarios that usb_port_resume() is set to handle. Prior to port power control the only time a power session would be lost is during dpm_suspend of the hub. In that scenario usb_port_resume() is guaranteed to be called prior to khubd running for that port. With this change we wakeup the child device as soon as possible (prior to khubd running again for this port). Although khubd has facilities to wake a child device it will only do so if the portstatus / portchange indicates a suspend state. In the case of port power control we are not coming from a hub-port-suspend state. This implementation simply uses pm_request_resume() to wake the device and relies on the port_dev->status_lock to prevent any collisions between khubd and usb_port_resume(). 2/ This mechanism rate limits port power toggling. The minimum port power on/off period is now gated by the child device suspend/resume latency. Empirically this mitigates devices downgrading their connection on perceived instability of the host connection. This ratelimiting is really only relevant to port power control testing, but it is a nice side effect of closing the above race. Namely, the race of khubd for the given port running while a usb_port_resume() event is pending. 3/ Going forward we are finding that power-session recovery requires warm-resets (http://marc.info/?t=138659232900003&r=1&w=2). This mechanism allows for warm-resets to be requested at the same point in the resume path for hub dpm_suspend power session losses, or port rpm_suspend power session losses. 4/ If the device *was* disconnected the only time we'll know for sure is after a failed resume, so it's necessary for usb_port_runtime_resume() to expedite a usb_port_resume() to clean up the removed device. The reasoning for this is "least surprise" for the user. Turning on a port means that hotplug detection is again enabled for the port, it is surprising that devices that were removed while the port was off are not disconnected until they are attempted to be used. As a user "why would I try to use a device I removed from the system?" 1, 2, and 4 are not a problem in the system dpm_resume() case because, although the power-session is lost, khubd is frozen until after device resume. For the rpm_resume() case pm_request_resume() is used to request re-validation of the device, and if it happens to collide with a khubd run we rely on the port_dev->status_lock to synchronize those operations. Besides testing, the primary scenario where this mechanism is expected to be triggered is when the user changes the port power policy (control/pm_qos_no_poweroff, or power/control). Each time power is enabled want to revalidate the child device, where the revalidation is handled by usb_port_resume(). Given that this arranges for port_dev->child to be de-referenced in usb_port_runtime_resume() we need to make sure not to collide with usb_disconnect() that frees the usb_device. To this end we hold the port active with the "child_usage" reference across the disconnect event. Subsequently, the need to access hub->child_usage_bits lead to the creation of hub_disconnect_children() to remove any ambiguity of which "hub" is being acted on in usb_disconnect() (prompted-by sharp eyes from Alan). Cc: Rafael J. Wysocki Acked-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 42 ++++++++++++++++++++++++++++------------- drivers/usb/core/port.c | 9 ++++++++- 2 files changed, 37 insertions(+), 14 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 28f5bbae35e0..6346fb2acbd7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2039,6 +2039,18 @@ static void hub_free_dev(struct usb_device *udev) hcd->driver->free_dev(hcd, udev); } +static void hub_disconnect_children(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + int i; + + /* Free up all the children before we remove this device */ + for (i = 0; i < udev->maxchild; i++) { + if (hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } +} + /** * usb_disconnect - disconnect a device (usbcore-internal) * @pdev: pointer to device being disconnected @@ -2057,9 +2069,10 @@ static void hub_free_dev(struct usb_device *udev) */ void usb_disconnect(struct usb_device **pdev) { - struct usb_device *udev = *pdev; - struct usb_hub *hub = usb_hub_to_struct_hub(udev); - int i; + struct usb_port *port_dev = NULL; + struct usb_device *udev = *pdev; + struct usb_hub *hub; + int port1; /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. @@ -2071,11 +2084,7 @@ void usb_disconnect(struct usb_device **pdev) usb_lock_device(udev); - /* Free up all the children before we remove this device */ - for (i = 0; i < udev->maxchild; i++) { - if (hub->ports[i]->child) - usb_disconnect(&hub->ports[i]->child); - } + hub_disconnect_children(udev); /* deallocate hcd/hardware state ... nuking all pending urbs and * cleaning up all state associated with the current configuration @@ -2086,15 +2095,19 @@ void usb_disconnect(struct usb_device **pdev) usb_hcd_synchronize_unlinks(udev); if (udev->parent) { - int port1 = udev->portnum; - struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); - struct usb_port *port_dev = hub->ports[port1 - 1]; + port1 = udev->portnum; + hub = usb_hub_to_struct_hub(udev->parent); + port_dev = hub->ports[port1 - 1]; sysfs_remove_link(&udev->dev.kobj, "port"); sysfs_remove_link(&port_dev->dev.kobj, "device"); - if (test_and_clear_bit(port1, hub->child_usage_bits)) - pm_runtime_put(&port_dev->dev); + /* + * As usb_port_runtime_resume() de-references udev, make + * sure no resumes occur during removal + */ + if (!test_and_set_bit(port1, hub->child_usage_bits)) + pm_runtime_get_sync(&port_dev->dev); } usb_remove_ep_devs(&udev->ep0); @@ -2116,6 +2129,9 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); + if (port_dev && test_and_clear_bit(port1, hub->child_usage_bits)) + pm_runtime_put(&port_dev->dev); + hub_free_dev(udev); put_device(&udev->dev); diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 8b1655700104..62036faf56c0 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -76,6 +76,7 @@ static int usb_port_runtime_resume(struct device *dev) struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_interface *intf = to_usb_interface(dev->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); + struct usb_device *udev = port_dev->child; struct usb_port *peer = port_dev->peer; int port1 = port_dev->portnum; int retval; @@ -97,7 +98,7 @@ static int usb_port_runtime_resume(struct device *dev) usb_autopm_get_interface(intf); retval = usb_hub_set_port_power(hdev, hub, port1, true); msleep(hub_power_on_good_delay(hub)); - if (port_dev->child && !retval) { + if (udev && !retval) { /* * Attempt to wait for usb hub port to be reconnected in order * to make the resume procedure successful. The device may have @@ -109,6 +110,12 @@ static int usb_port_runtime_resume(struct device *dev) dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n", retval); retval = 0; + + /* Force the child awake to revalidate after the power loss. */ + if (!test_and_set_bit(port1, hub->child_usage_bits)) { + pm_runtime_get_noresume(&port_dev->dev); + pm_request_resume(&udev->dev); + } } usb_autopm_put_interface(intf); From 7ca22cfa0f04917c6dc22b9587f6a6448a7b67d3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 09:40:45 -0700 Subject: [PATCH 297/314] USB: remove CONFIG_USB_DEBUG from defconfig files Now that CONFIG_USB_DEBUG is gone, remove it from a number of defconfig files that were enabling it. Signed-off-by: Greg Kroah-Hartman --- arch/arm/configs/badge4_defconfig | 1 - arch/arm/configs/colibri_pxa300_defconfig | 1 - arch/arm/configs/ep93xx_defconfig | 1 - arch/arm/configs/footbridge_defconfig | 1 - arch/arm/configs/keystone_defconfig | 1 - arch/arm/configs/neponset_defconfig | 1 - arch/arm/configs/omap1_defconfig | 1 - arch/arm/configs/omap2plus_defconfig | 1 - arch/arm/configs/raumfeld_defconfig | 1 - arch/arm/configs/tct_hammer_defconfig | 1 - arch/parisc/configs/c3000_defconfig | 1 - arch/parisc/configs/generic-64bit_defconfig | 1 - arch/powerpc/configs/44x/currituck_defconfig | 1 - arch/powerpc/configs/ppc6xx_defconfig | 1 - arch/sh/configs/apsh4ad0a_defconfig | 1 - arch/sh/configs/rsk7264_defconfig | 1 - arch/sh/configs/rsk7269_defconfig | 1 - arch/sh/configs/sdk7780_defconfig | 1 - arch/sh/configs/se7343_defconfig | 1 - arch/x86/configs/i386_defconfig | 1 - arch/x86/configs/x86_64_defconfig | 1 - 21 files changed, 21 deletions(-) diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 60b0b9368b1b..0494c8f229a2 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -73,7 +73,6 @@ CONFIG_SA1100_WATCHDOG=m CONFIG_SOUND=y CONFIG_SOUND_PRIME=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_MON=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index 2641dd6ed2f5..be02fe2b14cb 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -47,7 +47,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 6ac5ea73bd0a..1b650c85bdd0 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -80,7 +80,6 @@ CONFIG_I2C_DEBUG_BUS=y CONFIG_WATCHDOG=y CONFIG_EP93XX_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 17bb3f7b5802..87e020f303ab 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -100,7 +100,6 @@ CONFIG_FB_CYBER2000=y CONFIG_SOUND=m # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y CONFIG_USB_MON=m CONFIG_USB_PRINTER=m CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index ec9a41d50680..095bb52671f6 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -135,7 +135,6 @@ CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_DAVINCI_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 63aa319b44bb..460dca4a4f98 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -68,7 +68,6 @@ CONFIG_SOUND=y CONFIG_SOUND_PRIME=y # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 0f258d555fbc..ce541bb3c2de 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -197,7 +197,6 @@ CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_PHY=y -CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a4e8d017f25b..b793a5362cf2 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -217,7 +217,6 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_WDM=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig index f7caa909b40d..3d833aea545a 100644 --- a/arch/arm/configs/raumfeld_defconfig +++ b/arch/arm/configs/raumfeld_defconfig @@ -122,7 +122,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 71277a1591ba..7209a2caefcf 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -47,7 +47,6 @@ CONFIG_BLK_DEV_RAM_SIZE=10240 # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index b2c3905682d9..fb92b8920785 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -127,7 +127,6 @@ CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_AD1889=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig index 28c1b5de044e..dc0d7ce71ea7 100644 --- a/arch/parisc/configs/generic-64bit_defconfig +++ b/arch/parisc/configs/generic-64bit_defconfig @@ -219,7 +219,6 @@ CONFIG_HIDRAW=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_MON=m diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig index 4192322f8a7f..47de68261443 100644 --- a/arch/powerpc/configs/44x/currituck_defconfig +++ b/arch/powerpc/configs/44x/currituck_defconfig @@ -71,7 +71,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_RTC_CLASS=y diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index b21156372b24..c91066944842 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -964,7 +964,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig index 95ae23fcfdd6..ec70475da890 100644 --- a/arch/sh/configs/apsh4ad0a_defconfig +++ b/arch/sh/configs/apsh4ad0a_defconfig @@ -93,7 +93,6 @@ CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig index 1600426224c2..eecdf65bb789 100644 --- a/arch/sh/configs/rsk7264_defconfig +++ b/arch/sh/configs/rsk7264_defconfig @@ -60,7 +60,6 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_R8A66597_HCD=y diff --git a/arch/sh/configs/rsk7269_defconfig b/arch/sh/configs/rsk7269_defconfig index 9f062b5837d7..8370b10df357 100644 --- a/arch/sh/configs/rsk7269_defconfig +++ b/arch/sh/configs/rsk7269_defconfig @@ -43,7 +43,6 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_R8A66597_HCD=y diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index fa37e897399b..6a96b9a2f7a5 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -100,7 +100,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index af3fe7352471..201acb4652f7 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -92,7 +92,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_ISP116X_HCD=y CONFIG_UIO=y diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 619e7f7426c6..32d2e7056c87 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -244,7 +244,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 6181c69b786b..a481dd4755d5 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -239,7 +239,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y From c624fa5e0ec09c99bff0ab7759fea55bb00d36c6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 09:42:10 -0700 Subject: [PATCH 298/314] USB: usbip: remove CONFIG_USB_DEBUG reference As the config option is gone, it's a bit hard to enable it so remove the reference to it. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/userspace/README | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/usbip/userspace/README b/drivers/staging/usbip/userspace/README index f528ba462b5f..831f49fea3ce 100644 --- a/drivers/staging/usbip/userspace/README +++ b/drivers/staging/usbip/userspace/README @@ -195,7 +195,6 @@ Detach the imported device: - Shutdown firewall. - usbip now uses TCP port 3240. - Disable SELinux. - - If possible, compile your kernel with CONFIG_USB_DEBUG flag and try again. - Check the kernel and daemon messages. From 357d596ea7bea5abf1479cc72ae5888c738717dd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 11:35:41 -0700 Subject: [PATCH 299/314] Revert "usb: gadget: net2280: Add support for PLX USB338X" This reverts commit c4128cac3557ddd5fa972cb6511c426cd94a7ccd. This should come through Felipe's tree first, and there was a bunch of other patches that are needed after this one as well that I didn't have. Cc: Ricardo Ribalda Delgado Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 10 +- drivers/usb/gadget/net2280.c | 1115 +++------------------------------- drivers/usb/gadget/net2280.h | 97 +-- include/linux/usb/usb338x.h | 199 ------ 4 files changed, 91 insertions(+), 1330 deletions(-) delete mode 100644 include/linux/usb/usb338x.h diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 49e434ec527d..ba18e9c110cc 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -409,7 +409,7 @@ config USB_NET2272_DMA If unsure, say "N" here. The driver works fine in PIO mode. config USB_NET2280 - tristate "NetChip 228x / PLX USB338x" + tristate "NetChip 228x" depends on PCI help NetChip 2280 / 2282 is a PCI based USB peripheral controller which @@ -419,14 +419,6 @@ config USB_NET2280 (for control transfers) and several endpoints with dedicated functions. - PLX 3380 / 3382 is a PCIe based USB peripheral controller which - supports full, high speed USB 2.0 and super speed USB 3.0 - data transfers. - - It has eight configurable endpoints, as well as endpoint zero - (for control transfers) and several endpoints with dedicated - functions. - Say "y" to link the driver statically, or "m" to build a dynamically linked module called "net2280" and force all gadget drivers to also be dynamically linked. diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 87789c9bf7fe..300b3a71383b 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -18,9 +18,6 @@ * hint to completely eliminate some IRQs, if a later IRQ is guaranteed * and DMA chaining is enabled. * - * MSI is enabled by default. The legacy IRQ is used if MSI couldn't - * be enabled. - * * Note that almost all the errata workarounds here are only needed for * rev1 chips. Rev1a silicon (0110) fixes almost all of them. */ @@ -28,14 +25,10 @@ /* * Copyright (C) 2003 David Brownell * Copyright (C) 2003-2005 PLX Technology, Inc. - * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS * * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility * with 2282 chip * - * Modified Ricardo Ribalda Qtechnology AS to provide compatibility - * with usb 338x chip. Based on PLX driver - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -68,8 +61,9 @@ #include #include -#define DRIVER_DESC "PLX NET228x/USB338x USB Peripheral Controller" -#define DRIVER_VERSION "2005 Sept 27/v3.0" + +#define DRIVER_DESC "PLX NET228x USB Peripheral Controller" +#define DRIVER_VERSION "2005 Sept 27" #define EP_DONTUSE 13 /* nonzero */ @@ -79,12 +73,11 @@ static const char driver_name [] = "net2280"; static const char driver_desc [] = DRIVER_DESC; -static const u32 ep_bit[9] = { 0, 17, 2, 19, 4, 1, 18, 3, 20 }; static const char ep0name [] = "ep0"; static const char *const ep_name [] = { ep0name, "ep-a", "ep-b", "ep-c", "ep-d", - "ep-e", "ep-f", "ep-g", "ep-h", + "ep-e", "ep-f", }; /* use_dma -- general goodness, fewer interrupts, less cpu load (vs PIO) @@ -97,12 +90,11 @@ static const char *const ep_name [] = { */ static bool use_dma = 1; static bool use_dma_chaining = 0; -static bool use_msi = 1; /* "modprobe net2280 use_dma=n" etc */ module_param (use_dma, bool, S_IRUGO); module_param (use_dma_chaining, bool, S_IRUGO); -module_param(use_msi, bool, S_IRUGO); + /* mode 0 == ep-{a,b,c,d} 1K fifo each * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable @@ -156,9 +148,6 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) struct net2280_ep *ep; u32 max, tmp; unsigned long flags; - static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 }; - static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, - 0x50, 0x20, 0x70, 0x40, 0x90 }; ep = container_of (_ep, struct net2280_ep, ep); if (!_ep || !desc || ep->desc || _ep->name == ep0name @@ -172,20 +161,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) return -EDOM; - if (dev->pdev->vendor == 0x10b5) { - if ((desc->bEndpointAddress & 0x0f) >= 0x0c) - return -EDOM; - ep->is_in = !!usb_endpoint_dir_in(desc); - if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) - return -EINVAL; - } - /* sanity check ep-e/ep-f since their fifos are small */ max = usb_endpoint_maxp (desc) & 0x1fff; - if (ep->num > 4 && max > 64 && (dev->pdev->vendor == 0x17cc)) + if (ep->num > 4 && max > 64) return -ERANGE; - spin_lock_irqsave (&dev->lock, flags); _ep->maxpacket = max & 0x7ff; ep->desc = desc; @@ -196,8 +176,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ep->out_overflow = 0; /* set speed-dependent max packet; may kick in high bandwidth */ - set_idx_reg(dev->regs, (dev->enhanced_mode) ? ep_enhanced[ep->num] - : REG_EP_MAXPKT(dev, ep->num), max); + set_idx_reg (dev->regs, REG_EP_MAXPKT (dev, ep->num), max); /* FIFO lines can't go to different packets. PIO is ok, so * use it instead of troublesome (non-bulk) multi-packet DMA. @@ -220,43 +199,23 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) &ep->regs->ep_rsp); } else if (tmp == USB_ENDPOINT_XFER_BULK) { /* catch some particularly blatant driver bugs */ - if ((dev->gadget.speed == USB_SPEED_SUPER && max != 1024) || - (dev->gadget.speed == USB_SPEED_HIGH && max != 512) || - (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { - spin_unlock_irqrestore(&dev->lock, flags); + if ((dev->gadget.speed == USB_SPEED_HIGH + && max != 512) + || (dev->gadget.speed == USB_SPEED_FULL + && max > 64)) { + spin_unlock_irqrestore (&dev->lock, flags); return -ERANGE; } } ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0; - /* Enable this endpoint */ - if (dev->pdev->vendor == 0x17cc) { - tmp <<= ENDPOINT_TYPE; - tmp |= desc->bEndpointAddress; - /* default full fifo lines */ - tmp |= (4 << ENDPOINT_BYTE_COUNT); - tmp |= 1 << ENDPOINT_ENABLE; - ep->is_in = (tmp & USB_DIR_IN) != 0; - } else { - /* In Legacy mode, only OUT endpoints are used */ - if (dev->enhanced_mode && ep->is_in) { - tmp <<= IN_ENDPOINT_TYPE; - tmp |= (1 << IN_ENDPOINT_ENABLE); - /* Not applicable to Legacy */ - tmp |= (1 << ENDPOINT_DIRECTION); - } else { - tmp <<= OUT_ENDPOINT_TYPE; - tmp |= (1 << OUT_ENDPOINT_ENABLE); - tmp |= (ep->is_in << ENDPOINT_DIRECTION); - } - - tmp |= usb_endpoint_num(desc); - tmp |= (ep->ep.maxburst << MAX_BURST_SIZE); - } - - /* Make sure all the registers are written before ep_rsp*/ - wmb(); + tmp <<= ENDPOINT_TYPE; + tmp |= desc->bEndpointAddress; + tmp |= (4 << ENDPOINT_BYTE_COUNT); /* default full fifo lines */ + tmp |= 1 << ENDPOINT_ENABLE; + wmb (); /* for OUT transfers, block the rx fifo until a read is posted */ + ep->is_in = (tmp & USB_DIR_IN) != 0; if (!ep->is_in) writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); else if (dev->pdev->device != 0x2280) { @@ -267,13 +226,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); } - writel(tmp, &ep->cfg->ep_cfg); + writel (tmp, &ep->regs->ep_cfg); /* enable irqs */ if (!ep->dma) { /* pio, per-packet */ - tmp = (dev->pdev->vendor == 0x17cc)?(1 << ep->num) - : (1 << ep_bit[ep->num]); - tmp |= readl(&dev->regs->pciirqenb0); + tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); writel (tmp, &dev->regs->pciirqenb0); tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) @@ -294,10 +251,8 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) tmp = (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE); writel (tmp, &ep->regs->ep_irqenb); - tmp = (dev->pdev->vendor == 0x17cc)?(1 << ep->num) - : (1 << ep_bit[ep->num]); - tmp |= readl(&dev->regs->pciirqenb0); - writel(tmp, &dev->regs->pciirqenb0); + tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0); + writel (tmp, &dev->regs->pciirqenb0); } } @@ -331,8 +286,7 @@ static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) static const struct usb_ep_ops net2280_ep_ops; -static void ep_reset_228x(struct net2280_regs __iomem *regs, - struct net2280_ep *ep) +static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) { u32 tmp; @@ -407,55 +361,6 @@ static void ep_reset_228x(struct net2280_regs __iomem *regs, /* fifo size is handled separately */ } -static void ep_reset_338x(struct net2280_regs __iomem *regs, - struct net2280_ep *ep) -{ - u32 tmp, dmastat; - - ep->desc = NULL; - INIT_LIST_HEAD(&ep->queue); - - usb_ep_set_maxpacket_limit(&ep->ep, ~0); - ep->ep.ops = &net2280_ep_ops; - - /* disable the dma, irqs, endpoint... */ - if (ep->dma) { - writel(0, &ep->dma->dmactl); - writel((1 << DMA_ABORT_DONE_INTERRUPT) | - (1 << DMA_PAUSE_DONE_INTERRUPT) | - (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT) | - (1 << DMA_TRANSACTION_DONE_INTERRUPT) - /* | (1 << DMA_ABORT) */ - , &ep->dma->dmastat); - - dmastat = readl(&ep->dma->dmastat); - if (dmastat == 0x5002) { - WARNING(ep->dev, "The dmastat return = %x!!\n", - dmastat); - writel(0x5a, &ep->dma->dmastat); - } - - tmp = readl(®s->pciirqenb0); - tmp &= ~(1 << ep_bit[ep->num]); - writel(tmp, ®s->pciirqenb0); - } else { - if (ep->num < 5) { - tmp = readl(®s->pciirqenb1); - tmp &= ~(1 << (8 + ep->num)); /* completion */ - writel(tmp, ®s->pciirqenb1); - } - } - writel(0, &ep->regs->ep_irqenb); - - writel((1 << SHORT_PACKET_OUT_DONE_INTERRUPT) | - (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | - (1 << FIFO_OVERFLOW) | - (1 << DATA_PACKET_RECEIVED_INTERRUPT) | - (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) | - (1 << DATA_OUT_PING_TOKEN_INTERRUPT) | - (1 << DATA_IN_TOKEN_INTERRUPT), &ep->regs->ep_stat); -} - static void nuke (struct net2280_ep *); static int net2280_disable (struct usb_ep *_ep) @@ -469,17 +374,13 @@ static int net2280_disable (struct usb_ep *_ep) spin_lock_irqsave (&ep->dev->lock, flags); nuke (ep); - - if (ep->dev->pdev->vendor == 0x10b5) - ep_reset_338x(ep->dev->regs, ep); - else - ep_reset_228x(ep->dev->regs, ep); + ep_reset (ep->dev->regs, ep); VDEBUG (ep->dev, "disabled %s %s\n", ep->dma ? "dma" : "pio", _ep->name); /* synch memory views with the device */ - (void)readl(&ep->cfg->ep_cfg); + (void) readl (&ep->regs->ep_cfg); if (use_dma && !ep->dma && ep->num >= 1 && ep->num <= 4) ep->dma = &ep->dev->dma [ep->num - 1]; @@ -797,8 +698,6 @@ static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma) writel (readl (&dma->dmastat), &dma->dmastat); writel (td_dma, &dma->dmadesc); - if (ep->dev->pdev->vendor == 0x10b5) - dmactl |= (0x01 << DMA_REQUEST_OUTSTANDING); writel (dmactl, &dma->dmactl); /* erratum 0116 workaround part 3: pci arbiter away from net2280 */ @@ -873,21 +772,6 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) start_queue (ep, tmp, req->td_dma); } -static inline void resume_dma(struct net2280_ep *ep) -{ - writel(readl(&ep->dma->dmactl) | (1 << DMA_ENABLE), &ep->dma->dmactl); - - ep->dma_started = true; -} - -static inline void ep_stop_dma(struct net2280_ep *ep) -{ - writel(readl(&ep->dma->dmactl) & ~(1 << DMA_ENABLE), &ep->dma->dmactl); - spin_stop_dma(ep->dma); - - ep->dma_started = false; -} - static inline void queue_dma (struct net2280_ep *ep, struct net2280_request *req, int valid) { @@ -990,23 +874,8 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* kickstart this i/o queue? */ if (list_empty (&ep->queue) && !ep->stopped) { - /* DMA request while EP halted */ - if (ep->dma && - (readl(&ep->regs->ep_rsp) & (1 << CLEAR_ENDPOINT_HALT)) && - (dev->pdev->vendor == 0x10b5)) { - int valid = 1; - if (ep->is_in) { - int expect; - expect = likely(req->req.zero || - ((req->req.length % - ep->ep.maxpacket) != 0)); - if (expect != ep->in_fifo_validate) - valid = 0; - } - queue_dma(ep, req, valid); - } /* use DMA if the endpoint supports it, else pio */ - else if (ep->dma) + if (ep->dma) start_dma (ep, req); else { /* maybe there's no control data, just status ack */ @@ -1124,8 +993,6 @@ static void scan_dma_completions (struct net2280_ep *ep) } else if (!ep->is_in && (req->req.length % ep->ep.maxpacket) != 0) { tmp = readl (&ep->regs->ep_stat); - if (ep->dev->pdev->vendor == 0x10b5) - return dma_done(ep, req, tmp, 0); /* AVOID TROUBLE HERE by not issuing short reads from * your gadget driver. That helps avoids errata 0121, @@ -1212,7 +1079,7 @@ static void restart_dma (struct net2280_ep *ep) start_queue (ep, dmactl, req->td_dma); } -static void abort_dma_228x(struct net2280_ep *ep) +static void abort_dma (struct net2280_ep *ep) { /* abort the current transfer */ if (likely (!list_empty (&ep->queue))) { @@ -1224,19 +1091,6 @@ static void abort_dma_228x(struct net2280_ep *ep) scan_dma_completions (ep); } -static void abort_dma_338x(struct net2280_ep *ep) -{ - writel((1 << DMA_ABORT), &ep->dma->dmastat); - spin_stop_dma(ep->dma); -} - -static void abort_dma(struct net2280_ep *ep) -{ - if (ep->dev->pdev->vendor == 0x17cc) - return abort_dma_228x(ep); - return abort_dma_338x(ep); -} - /* dequeue ALL requests */ static void nuke (struct net2280_ep *ep) { @@ -1390,9 +1244,6 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) ep->wedged = 1; } else { clear_halt (ep); - if (ep->dev->pdev->vendor == 0x10b5 && - !list_empty(&ep->queue) && ep->td_dma) - restart_dma(ep); ep->wedged = 0; } (void) readl (&ep->regs->ep_rsp); @@ -1516,13 +1367,10 @@ static int net2280_set_selfpowered (struct usb_gadget *_gadget, int value) spin_lock_irqsave (&dev->lock, flags); tmp = readl (&dev->usb->usbctl); - if (value) { + if (value) tmp |= (1 << SELF_POWERED_STATUS); - dev->selfpowered = 1; - } else { + else tmp &= ~(1 << SELF_POWERED_STATUS); - dev->selfpowered = 0; - } writel (tmp, &dev->usb->usbctl); spin_unlock_irqrestore (&dev->lock, flags); @@ -1656,14 +1504,14 @@ static ssize_t registers_show(struct device *_dev, /* DMA Control Registers */ /* Configurable EP Control Registers */ - for (i = 0; i < dev->n_ep; i++) { + for (i = 0; i < 7; i++) { struct net2280_ep *ep; ep = &dev->ep [i]; if (i && !ep->desc) continue; - t1 = readl(&ep->cfg->ep_cfg); + t1 = readl (&ep->regs->ep_cfg); t2 = readl (&ep->regs->ep_rsp) & 0xff; t = scnprintf (next, size, "\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s" @@ -1723,7 +1571,7 @@ static ssize_t registers_show(struct device *_dev, t = scnprintf (next, size, "\nirqs: "); size -= t; next += t; - for (i = 0; i < dev->n_ep; i++) { + for (i = 0; i < 7; i++) { struct net2280_ep *ep; ep = &dev->ep [i]; @@ -1758,7 +1606,7 @@ static ssize_t queues_show(struct device *_dev, struct device_attribute *attr, size = PAGE_SIZE; spin_lock_irqsave (&dev->lock, flags); - for (i = 0; i < dev->n_ep; i++) { + for (i = 0; i < 7; i++) { struct net2280_ep *ep = &dev->ep [i]; struct net2280_request *req; int t; @@ -1887,121 +1735,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode) list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list); } -static void defect7374_disable_data_eps(struct net2280 *dev) -{ - /* - * For Defect 7374, disable data EPs (and more): - * - This phase undoes the earlier phase of the Defect 7374 workaround, - * returing ep regs back to normal. - */ - struct net2280_ep *ep; - int i; - unsigned char ep_sel; - u32 tmp_reg; - - for (i = 1; i < 5; i++) { - ep = &dev->ep[i]; - writel(0, &ep->cfg->ep_cfg); - } - - /* CSROUT, CSRIN, PCIOUT, PCIIN, STATIN, RCIN */ - for (i = 0; i < 6; i++) - writel(0, &dev->dep[i].dep_cfg); - - for (ep_sel = 0; ep_sel <= 21; ep_sel++) { - /* Select an endpoint for subsequent operations: */ - tmp_reg = readl(&dev->plregs->pl_ep_ctrl); - writel(((tmp_reg & ~0x1f) | ep_sel), &dev->plregs->pl_ep_ctrl); - - if (ep_sel < 2 || (ep_sel > 9 && ep_sel < 14) || - ep_sel == 18 || ep_sel == 20) - continue; - - /* Change settings on some selected endpoints */ - tmp_reg = readl(&dev->plregs->pl_ep_cfg_4); - tmp_reg &= ~(1 << NON_CTRL_IN_TOLERATE_BAD_DIR); - writel(tmp_reg, &dev->plregs->pl_ep_cfg_4); - tmp_reg = readl(&dev->plregs->pl_ep_ctrl); - tmp_reg |= (1 << EP_INITIALIZED); - writel(tmp_reg, &dev->plregs->pl_ep_ctrl); - } -} - -static void defect7374_enable_data_eps_zero(struct net2280 *dev) -{ - u32 tmp = 0, tmp_reg; - u32 fsmvalue, scratch; - int i; - unsigned char ep_sel; - - scratch = get_idx_reg(dev->regs, SCRATCH); - fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD); - scratch &= ~(0xf << DEFECT7374_FSM_FIELD); - - /*See if firmware needs to set up for workaround*/ - if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) { - WARNING(dev, "Operate Defect 7374 workaround soft this time"); - WARNING(dev, "It will operate on cold-reboot and SS connect"); - - /*GPEPs:*/ - tmp = ((0 << ENDPOINT_NUMBER) | (1 << ENDPOINT_DIRECTION) | - (2 << OUT_ENDPOINT_TYPE) | (2 << IN_ENDPOINT_TYPE) | - ((dev->enhanced_mode) ? - 1 << OUT_ENDPOINT_ENABLE : 1 << ENDPOINT_ENABLE) | - (1 << IN_ENDPOINT_ENABLE)); - - for (i = 1; i < 5; i++) - writel(tmp, &dev->ep[i].cfg->ep_cfg); - - /* CSRIN, PCIIN, STATIN, RCIN*/ - tmp = ((0 << ENDPOINT_NUMBER) | (1 << ENDPOINT_ENABLE)); - writel(tmp, &dev->dep[1].dep_cfg); - writel(tmp, &dev->dep[3].dep_cfg); - writel(tmp, &dev->dep[4].dep_cfg); - writel(tmp, &dev->dep[5].dep_cfg); - - /*Implemented for development and debug. - * Can be refined/tuned later.*/ - for (ep_sel = 0; ep_sel <= 21; ep_sel++) { - /* Select an endpoint for subsequent operations: */ - tmp_reg = readl(&dev->plregs->pl_ep_ctrl); - writel(((tmp_reg & ~0x1f) | ep_sel), - &dev->plregs->pl_ep_ctrl); - - if (ep_sel == 1) { - tmp = - (readl(&dev->plregs->pl_ep_ctrl) | - (1 << CLEAR_ACK_ERROR_CODE) | 0); - writel(tmp, &dev->plregs->pl_ep_ctrl); - continue; - } - - if (ep_sel == 0 || (ep_sel > 9 && ep_sel < 14) || - ep_sel == 18 || ep_sel == 20) - continue; - - tmp = (readl(&dev->plregs->pl_ep_cfg_4) | - (1 << NON_CTRL_IN_TOLERATE_BAD_DIR) | 0); - writel(tmp, &dev->plregs->pl_ep_cfg_4); - - tmp = readl(&dev->plregs->pl_ep_ctrl) & - ~(1 << EP_INITIALIZED); - writel(tmp, &dev->plregs->pl_ep_ctrl); - - } - - /* Set FSM to focus on the first Control Read: - * - Tip: Connection speed is known upon the first - * setup request.*/ - scratch |= DEFECT7374_FSM_WAITING_FOR_CONTROL_READ; - set_idx_reg(dev->regs, SCRATCH, scratch); - - } else{ - WARNING(dev, "Defect 7374 workaround soft will NOT operate"); - WARNING(dev, "It will operate on cold-reboot and SS connect"); - } -} - /* keeping it simple: * - one bus driver, initted first; * - one function driver, initted second @@ -2011,7 +1744,7 @@ static void defect7374_enable_data_eps_zero(struct net2280 *dev) * perhaps to bind specific drivers to specific devices. */ -static void usb_reset_228x(struct net2280 *dev) +static void usb_reset (struct net2280 *dev) { u32 tmp; @@ -2027,11 +1760,11 @@ static void usb_reset_228x(struct net2280 *dev) /* clear old dma and irq state */ for (tmp = 0; tmp < 4; tmp++) { - struct net2280_ep *ep = &dev->ep[tmp + 1]; - if (ep->dma) - abort_dma(ep); - } + struct net2280_ep *ep = &dev->ep [tmp + 1]; + if (ep->dma) + abort_dma (ep); + } writel (~0, &dev->regs->irqstat0), writel (~(1 << SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1), @@ -2047,67 +1780,7 @@ static void usb_reset_228x(struct net2280 *dev) set_fifo_mode (dev, (fifo_mode <= 2) ? fifo_mode : 0); } -static void usb_reset_338x(struct net2280 *dev) -{ - u32 tmp; - u32 fsmvalue; - - dev->gadget.speed = USB_SPEED_UNKNOWN; - (void)readl(&dev->usb->usbctl); - - net2280_led_init(dev); - - fsmvalue = get_idx_reg(dev->regs, SCRATCH) & - (0xf << DEFECT7374_FSM_FIELD); - - /* See if firmware needs to set up for workaround: */ - if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) { - INFO(dev, "%s: Defect 7374 FsmValue 0x%08X\n", __func__, - fsmvalue); - } else { - /* disable automatic responses, and irqs */ - writel(0, &dev->usb->stdrsp); - writel(0, &dev->regs->pciirqenb0); - writel(0, &dev->regs->pciirqenb1); - } - - /* clear old dma and irq state */ - for (tmp = 0; tmp < 4; tmp++) { - struct net2280_ep *ep = &dev->ep[tmp + 1]; - - if (ep->dma) - abort_dma(ep); - } - - writel(~0, &dev->regs->irqstat0), writel(~0, &dev->regs->irqstat1); - - if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) { - /* reset, and enable pci */ - tmp = readl(&dev->regs->devinit) | - (1 << PCI_ENABLE) | - (1 << FIFO_SOFT_RESET) | - (1 << USB_SOFT_RESET) | - (1 << M8051_RESET); - - writel(tmp, &dev->regs->devinit); - } - - /* always ep-{1,2,3,4} ... maybe not ep-3 or ep-4 */ - INIT_LIST_HEAD(&dev->gadget.ep_list); - - for (tmp = 1; tmp < dev->n_ep; tmp++) - list_add_tail(&dev->ep[tmp].ep.ep_list, &dev->gadget.ep_list); - -} - -static void usb_reset(struct net2280 *dev) -{ - if (dev->pdev->vendor == 0x17cc) - return usb_reset_228x(dev); - return usb_reset_338x(dev); -} - -static void usb_reinit_228x(struct net2280 *dev) +static void usb_reinit (struct net2280 *dev) { u32 tmp; int init_dma; @@ -2130,8 +1803,7 @@ static void usb_reinit_228x(struct net2280 *dev) } else ep->fifo_size = 64; ep->regs = &dev->epregs [tmp]; - ep->cfg = &dev->epregs[tmp]; - ep_reset_228x(dev->regs, ep); + ep_reset (dev->regs, ep); } usb_ep_set_maxpacket_limit(&dev->ep [0].ep, 64); usb_ep_set_maxpacket_limit(&dev->ep [5].ep, 64); @@ -2148,122 +1820,7 @@ static void usb_reinit_228x(struct net2280 *dev) writel (EP_DONTUSE, &dev->dep [tmp].dep_cfg); } -static void usb_reinit_338x(struct net2280 *dev) -{ - int init_dma; - int i; - u32 tmp, val; - u32 fsmvalue; - static const u32 ne[9] = { 0, 1, 2, 3, 4, 1, 2, 3, 4 }; - static const u32 ep_reg_addr[9] = { 0x00, 0xC0, 0x00, 0xC0, 0x00, - 0x00, 0xC0, 0x00, 0xC0 }; - - /* use_dma changes are ignored till next device re-init */ - init_dma = use_dma; - - /* basic endpoint init */ - for (i = 0; i < dev->n_ep; i++) { - struct net2280_ep *ep = &dev->ep[i]; - - ep->ep.name = ep_name[i]; - ep->dev = dev; - ep->num = i; - - if (i > 0 && i <= 4 && init_dma) - ep->dma = &dev->dma[i - 1]; - - if (dev->enhanced_mode) { - ep->cfg = &dev->epregs[ne[i]]; - ep->regs = (struct net2280_ep_regs __iomem *) - (((void *)&dev->epregs[ne[i]]) + - ep_reg_addr[i]); - ep->fiforegs = &dev->fiforegs[i]; - } else { - ep->cfg = &dev->epregs[i]; - ep->regs = &dev->epregs[i]; - ep->fiforegs = &dev->fiforegs[i]; - } - - ep->fifo_size = (i != 0) ? 2048 : 512; - - ep_reset_338x(dev->regs, ep); - } - usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 512); - - dev->gadget.ep0 = &dev->ep[0].ep; - dev->ep[0].stopped = 0; - - /* Link layer set up */ - fsmvalue = get_idx_reg(dev->regs, SCRATCH) & - (0xf << DEFECT7374_FSM_FIELD); - - /* See if driver needs to set up for workaround: */ - if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) - INFO(dev, "%s: Defect 7374 FsmValue %08x\n", - __func__, fsmvalue); - else { - tmp = readl(&dev->usb_ext->usbctl2) & - ~((1 << U1_ENABLE) | (1 << U2_ENABLE) | (1 << LTM_ENABLE)); - writel(tmp, &dev->usb_ext->usbctl2); - } - - /* Hardware Defect and Workaround */ - val = readl(&dev->ll_lfps_regs->ll_lfps_5); - val &= ~(0xf << TIMER_LFPS_6US); - val |= 0x5 << TIMER_LFPS_6US; - writel(val, &dev->ll_lfps_regs->ll_lfps_5); - - val = readl(&dev->ll_lfps_regs->ll_lfps_6); - val &= ~(0xffff << TIMER_LFPS_80US); - val |= 0x0100 << TIMER_LFPS_80US; - writel(val, &dev->ll_lfps_regs->ll_lfps_6); - - /* - * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB - * Hot Reset Exit Handshake may Fail in Specific Case using - * Default Register Settings. Workaround for Enumeration test. - */ - val = readl(&dev->ll_tsn_regs->ll_tsn_counters_2); - val &= ~(0x1f << HOT_TX_NORESET_TS2); - val |= 0x10 << HOT_TX_NORESET_TS2; - writel(val, &dev->ll_tsn_regs->ll_tsn_counters_2); - - val = readl(&dev->ll_tsn_regs->ll_tsn_counters_3); - val &= ~(0x1f << HOT_RX_RESET_TS2); - val |= 0x3 << HOT_RX_RESET_TS2; - writel(val, &dev->ll_tsn_regs->ll_tsn_counters_3); - - /* - * Set Recovery Idle to Recover bit: - * - On SS connections, setting Recovery Idle to Recover Fmw improves - * link robustness with various hosts and hubs. - * - It is safe to set for all connection speeds; all chip revisions. - * - R-M-W to leave other bits undisturbed. - * - Reference PLX TT-7372 - */ - val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit); - val |= (1 << RECOVERY_IDLE_TO_RECOVER_FMW); - writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit); - - INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); - - /* disable dedicated endpoints */ - writel(0x0D, &dev->dep[0].dep_cfg); - writel(0x0D, &dev->dep[1].dep_cfg); - writel(0x0E, &dev->dep[2].dep_cfg); - writel(0x0E, &dev->dep[3].dep_cfg); - writel(0x0F, &dev->dep[4].dep_cfg); - writel(0x0C, &dev->dep[5].dep_cfg); -} - -static void usb_reinit(struct net2280 *dev) -{ - if (dev->pdev->vendor == 0x17cc) - return usb_reinit_228x(dev); - return usb_reinit_338x(dev); -} - -static void ep0_start_228x(struct net2280 *dev) +static void ep0_start (struct net2280 *dev) { writel ( (1 << CLEAR_EP_HIDE_STATUS_PHASE) | (1 << CLEAR_NAK_OUT_PACKETS) @@ -2306,61 +1863,6 @@ static void ep0_start_228x(struct net2280 *dev) (void) readl (&dev->usb->usbctl); } -static void ep0_start_338x(struct net2280 *dev) -{ - u32 fsmvalue; - - fsmvalue = get_idx_reg(dev->regs, SCRATCH) & - (0xf << DEFECT7374_FSM_FIELD); - - if (fsmvalue != DEFECT7374_FSM_SS_CONTROL_READ) - INFO(dev, "%s: Defect 7374 FsmValue %08x\n", __func__, - fsmvalue); - else - writel((1 << CLEAR_NAK_OUT_PACKETS_MODE) | - (1 << SET_EP_HIDE_STATUS_PHASE), - &dev->epregs[0].ep_rsp); - - /* - * hardware optionally handles a bunch of standard requests - * that the API hides from drivers anyway. have it do so. - * endpoint status/features are handled in software, to - * help pass tests for some dubious behavior. - */ - writel((1 << SET_ISOCHRONOUS_DELAY) | - (1 << SET_SEL) | - (1 << SET_TEST_MODE) | - (1 << SET_ADDRESS) | - (1 << GET_INTERFACE_STATUS) | - (1 << GET_DEVICE_STATUS), - &dev->usb->stdrsp); - dev->wakeup_enable = 1; - writel((1 << USB_ROOT_PORT_WAKEUP_ENABLE) | - (dev->softconnect << USB_DETECT_ENABLE) | - (1 << DEVICE_REMOTE_WAKEUP_ENABLE), - &dev->usb->usbctl); - - /* enable irqs so we can see ep0 and general operation */ - writel((1 << SETUP_PACKET_INTERRUPT_ENABLE) | - (1 << ENDPOINT_0_INTERRUPT_ENABLE) - , &dev->regs->pciirqenb0); - writel((1 << PCI_INTERRUPT_ENABLE) | - (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) | - (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) | - (1 << VBUS_INTERRUPT_ENABLE), - &dev->regs->pciirqenb1); - - /* don't leave any writes posted */ - (void)readl(&dev->usb->usbctl); -} - -static void ep0_start(struct net2280 *dev) -{ - if (dev->pdev->vendor == 0x17cc) - return ep0_start_228x(dev); - return ep0_start_338x(dev); -} - /* when a driver is successfully registered, it will receive * control requests including set_configuration(), which enables * non-control requests. then usb traffic follows until a @@ -2384,7 +1886,7 @@ static int net2280_start(struct usb_gadget *_gadget, dev = container_of (_gadget, struct net2280, gadget); - for (i = 0; i < dev->n_ep; i++) + for (i = 0; i < 7; i++) dev->ep [i].irqs = 0; /* hook up the driver ... */ @@ -2398,17 +1900,13 @@ static int net2280_start(struct usb_gadget *_gadget, if (retval) goto err_func; /* Enable force-full-speed testing mode, if desired */ - if (full_speed && dev->pdev->vendor == 0x17cc) + if (full_speed) writel(1 << FORCE_FULL_SPEED_MODE, &dev->usb->xcvrdiag); /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. */ net2280_led_active (dev, 1); - - if (dev->pdev->vendor == 0x10b5) - defect7374_enable_data_eps_zero(dev); - ep0_start (dev); DEBUG (dev, "%s ready, usbctl %08x stdrsp %08x\n", @@ -2439,7 +1937,7 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) * and kill any outstanding requests. */ usb_reset (dev); - for (i = 0; i < dev->n_ep; i++) + for (i = 0; i < 7; i++) nuke (&dev->ep [i]); /* report disconnect; the driver is already quiesced */ @@ -2469,8 +1967,7 @@ static int net2280_stop(struct usb_gadget *_gadget, net2280_led_active (dev, 0); /* Disable full-speed test mode */ - if (dev->pdev->vendor == 0x17cc) - writel(0, &dev->usb->xcvrdiag); + writel(0, &dev->usb->xcvrdiag); device_remove_file (&dev->pdev->dev, &dev_attr_function); device_remove_file (&dev->pdev->dev, &dev_attr_queues); @@ -2722,350 +2219,6 @@ get_ep_by_addr (struct net2280 *dev, u16 wIndex) return NULL; } -static void defect7374_workaround(struct net2280 *dev, struct usb_ctrlrequest r) -{ - u32 scratch, fsmvalue; - u32 ack_wait_timeout, state; - - /* Workaround for Defect 7374 (U1/U2 erroneously rejected): */ - scratch = get_idx_reg(dev->regs, SCRATCH); - fsmvalue = scratch & (0xf << DEFECT7374_FSM_FIELD); - scratch &= ~(0xf << DEFECT7374_FSM_FIELD); - - if (!((fsmvalue == DEFECT7374_FSM_WAITING_FOR_CONTROL_READ) && - (r.bRequestType & USB_DIR_IN))) - return; - - /* This is the first Control Read for this connection: */ - if (!(readl(&dev->usb->usbstat) & (1 << SUPER_SPEED_MODE))) { - /* - * Connection is NOT SS: - * - Connection must be FS or HS. - * - This FSM state should allow workaround software to - * run after the next USB connection. - */ - scratch |= DEFECT7374_FSM_NON_SS_CONTROL_READ; - goto restore_data_eps; - } - - /* Connection is SS: */ - for (ack_wait_timeout = 0; - ack_wait_timeout < DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS; - ack_wait_timeout++) { - - state = readl(&dev->plregs->pl_ep_status_1) - & (0xff << STATE); - if ((state >= (ACK_GOOD_NORMAL << STATE)) && - (state <= (ACK_GOOD_MORE_ACKS_TO_COME << STATE))) { - scratch |= DEFECT7374_FSM_SS_CONTROL_READ; - break; - } - - /* - * We have not yet received host's Data Phase ACK - * - Wait and try again. - */ - udelay(DEFECT_7374_PROCESSOR_WAIT_TIME); - - continue; - } - - - if (ack_wait_timeout >= DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS) { - ERROR(dev, "FAIL: Defect 7374 workaround waited but failed"); - ERROR(dev, "to detect SS host's data phase ACK."); - ERROR(dev, "PL_EP_STATUS_1(23:16):.Expected from 0x11 to 0x16"); - ERROR(dev, "got 0x%2.2x.\n", state >> STATE); - } else { - WARNING(dev, "INFO: Defect 7374 workaround waited about\n"); - WARNING(dev, "%duSec for Control Read Data Phase ACK\n", - DEFECT_7374_PROCESSOR_WAIT_TIME * ack_wait_timeout); - } - -restore_data_eps: - /* - * Restore data EPs to their pre-workaround settings (disabled, - * initialized, and other details). - */ - defect7374_disable_data_eps(dev); - - set_idx_reg(dev->regs, SCRATCH, scratch); - - return; -} - -static void ep_stall(struct net2280_ep *ep, int stall) -{ - struct net2280 *dev = ep->dev; - u32 val; - static const u32 ep_pl[9] = { 0, 3, 4, 7, 8, 2, 5, 6, 9 }; - - if (stall) { - writel((1 << SET_ENDPOINT_HALT) | - /* (1 << SET_NAK_PACKETS) | */ - (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), - &ep->regs->ep_rsp); - ep->is_halt = 1; - } else { - if (dev->gadget.speed == USB_SPEED_SUPER) { - /* - * Workaround for SS SeqNum not cleared via - * Endpoint Halt (Clear) bit. select endpoint - */ - val = readl(&dev->plregs->pl_ep_ctrl); - val = (val & ~0x1f) | ep_pl[ep->num]; - writel(val, &dev->plregs->pl_ep_ctrl); - - val |= (1 << SEQUENCE_NUMBER_RESET); - writel(val, &dev->plregs->pl_ep_ctrl); - } - val = readl(&ep->regs->ep_rsp); - val |= (1 << CLEAR_ENDPOINT_HALT) | - (1 << CLEAR_ENDPOINT_TOGGLE); - writel(val - /* | (1 << CLEAR_NAK_PACKETS)*/ - , &ep->regs->ep_rsp); - ep->is_halt = 0; - val = readl(&ep->regs->ep_rsp); - } -} - -static void ep_stdrsp(struct net2280_ep *ep, int value, int wedged) -{ - /* set/clear, then synch memory views with the device */ - if (value) { - ep->stopped = 1; - if (ep->num == 0) - ep->dev->protocol_stall = 1; - else { - if (ep->dma) - ep_stop_dma(ep); - ep_stall(ep, true); - } - - if (wedged) - ep->wedged = 1; - } else { - ep->stopped = 0; - ep->wedged = 0; - - ep_stall(ep, false); - - /* Flush the queue */ - if (!list_empty(&ep->queue)) { - struct net2280_request *req = - list_entry(ep->queue.next, struct net2280_request, - queue); - if (ep->dma) - resume_dma(ep); - else { - if (ep->is_in) - write_fifo(ep, &req->req); - else { - if (read_fifo(ep, req)) - done(ep, req, 0); - } - } - } - } -} - -static void handle_stat0_irqs_superspeed(struct net2280 *dev, - struct net2280_ep *ep, struct usb_ctrlrequest r) -{ - int tmp = 0; - -#define w_value le16_to_cpu(r.wValue) -#define w_index le16_to_cpu(r.wIndex) -#define w_length le16_to_cpu(r.wLength) - - switch (r.bRequest) { - struct net2280_ep *e; - u16 status; - - case USB_REQ_SET_CONFIGURATION: - dev->addressed_state = !w_value; - goto usb3_delegate; - - case USB_REQ_GET_STATUS: - switch (r.bRequestType) { - case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE): - status = dev->wakeup_enable ? 0x02 : 0x00; - if (dev->selfpowered) - status |= 1 << 0; - status |= (dev->u1_enable << 2 | dev->u2_enable << 3 | - dev->ltm_enable << 4); - writel(0, &dev->epregs[0].ep_irqenb); - set_fifo_bytecount(ep, sizeof(status)); - writel((__force u32) status, &dev->epregs[0].ep_data); - allow_status_338x(ep); - break; - - case (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): - e = get_ep_by_addr(dev, w_index); - if (!e) - goto do_stall3; - status = readl(&e->regs->ep_rsp) & - (1 << CLEAR_ENDPOINT_HALT); - writel(0, &dev->epregs[0].ep_irqenb); - set_fifo_bytecount(ep, sizeof(status)); - writel((__force u32) status, &dev->epregs[0].ep_data); - allow_status_338x(ep); - break; - - default: - goto usb3_delegate; - } - break; - - case USB_REQ_CLEAR_FEATURE: - switch (r.bRequestType) { - case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE): - if (!dev->addressed_state) { - switch (w_value) { - case USB_DEVICE_U1_ENABLE: - dev->u1_enable = 0; - writel(readl(&dev->usb_ext->usbctl2) & - ~(1 << U1_ENABLE), - &dev->usb_ext->usbctl2); - allow_status_338x(ep); - goto next_endpoints3; - - case USB_DEVICE_U2_ENABLE: - dev->u2_enable = 0; - writel(readl(&dev->usb_ext->usbctl2) & - ~(1 << U2_ENABLE), - &dev->usb_ext->usbctl2); - allow_status_338x(ep); - goto next_endpoints3; - - case USB_DEVICE_LTM_ENABLE: - dev->ltm_enable = 0; - writel(readl(&dev->usb_ext->usbctl2) & - ~(1 << LTM_ENABLE), - &dev->usb_ext->usbctl2); - allow_status_338x(ep); - goto next_endpoints3; - - default: - break; - } - } - if (w_value == USB_DEVICE_REMOTE_WAKEUP) { - dev->wakeup_enable = 0; - writel(readl(&dev->usb->usbctl) & - ~(1 << DEVICE_REMOTE_WAKEUP_ENABLE), - &dev->usb->usbctl); - allow_status_338x(ep); - break; - } - goto usb3_delegate; - - case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): - e = get_ep_by_addr(dev, w_index); - if (!e) - goto do_stall3; - if (w_value != USB_ENDPOINT_HALT) - goto do_stall3; - VDEBUG(dev, "%s clear halt\n", e->ep.name); - ep_stall(e, false); - if (!list_empty(&e->queue) && e->td_dma) - restart_dma(e); - allow_status(ep); - ep->stopped = 1; - break; - - default: - goto usb3_delegate; - } - break; - case USB_REQ_SET_FEATURE: - switch (r.bRequestType) { - case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE): - if (!dev->addressed_state) { - switch (w_value) { - case USB_DEVICE_U1_ENABLE: - dev->u1_enable = 1; - writel(readl(&dev->usb_ext->usbctl2) | - (1 << U1_ENABLE), - &dev->usb_ext->usbctl2); - allow_status_338x(ep); - goto next_endpoints3; - - case USB_DEVICE_U2_ENABLE: - dev->u2_enable = 1; - writel(readl(&dev->usb_ext->usbctl2) | - (1 << U2_ENABLE), - &dev->usb_ext->usbctl2); - allow_status_338x(ep); - goto next_endpoints3; - - case USB_DEVICE_LTM_ENABLE: - dev->ltm_enable = 1; - writel(readl(&dev->usb_ext->usbctl2) | - (1 << LTM_ENABLE), - &dev->usb_ext->usbctl2); - allow_status_338x(ep); - goto next_endpoints3; - default: - break; - } - } - - if (w_value == USB_DEVICE_REMOTE_WAKEUP) { - dev->wakeup_enable = 1; - writel(readl(&dev->usb->usbctl) | - (1 << DEVICE_REMOTE_WAKEUP_ENABLE), - &dev->usb->usbctl); - allow_status_338x(ep); - break; - } - goto usb3_delegate; - - case (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_ENDPOINT): - e = get_ep_by_addr(dev, w_index); - if (!e || (w_value != USB_ENDPOINT_HALT)) - goto do_stall3; - ep_stdrsp(e, true, false); - allow_status_338x(ep); - break; - - default: - goto usb3_delegate; - } - - break; - default: - -usb3_delegate: - VDEBUG(dev, "setup %02x.%02x v%04x i%04x l%04x ep_cfg %08x\n", - r.bRequestType, r.bRequest, - w_value, w_index, w_length, - readl(&ep->cfg->ep_cfg)); - - ep->responded = 0; - spin_unlock(&dev->lock); - tmp = dev->driver->setup(&dev->gadget, &r); - spin_lock(&dev->lock); - } -do_stall3: - if (tmp < 0) { - VDEBUG(dev, "req %02x.%02x protocol STALL; stat %d\n", - r.bRequestType, r.bRequest, tmp); - dev->protocol_stall = 1; - /* TD 9.9 Halt Endpoint test. TD 9.22 Set feature test */ - ep_stall(ep, true); - } - -next_endpoints3: - -#undef w_value -#undef w_index -#undef w_length - - return; -} - static void handle_stat0_irqs (struct net2280 *dev, u32 stat) { struct net2280_ep *ep; @@ -3087,20 +2240,10 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) struct net2280_request *req; if (dev->gadget.speed == USB_SPEED_UNKNOWN) { - u32 val = readl(&dev->usb->usbstat); - if (val & (1 << SUPER_SPEED)) { - dev->gadget.speed = USB_SPEED_SUPER; - usb_ep_set_maxpacket_limit(&dev->ep[0].ep, - EP0_SS_MAX_PACKET_SIZE); - } else if (val & (1 << HIGH_SPEED)) { + if (readl (&dev->usb->usbstat) & (1 << HIGH_SPEED)) dev->gadget.speed = USB_SPEED_HIGH; - usb_ep_set_maxpacket_limit(&dev->ep[0].ep, - EP0_HS_MAX_PACKET_SIZE); - } else { + else dev->gadget.speed = USB_SPEED_FULL; - usb_ep_set_maxpacket_limit(&dev->ep[0].ep, - EP0_HS_MAX_PACKET_SIZE); - } net2280_led_speed (dev, dev->gadget.speed); DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed)); } @@ -3118,38 +2261,32 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) } ep->stopped = 0; dev->protocol_stall = 0; - if (dev->pdev->vendor == 0x10b5) - ep->is_halt = 0; - else{ - if (ep->dev->pdev->device == 0x2280) - tmp = (1 << FIFO_OVERFLOW) | - (1 << FIFO_UNDERFLOW); - else - tmp = 0; - writel(tmp | (1 << TIMEOUT) | - (1 << USB_STALL_SENT) | - (1 << USB_IN_NAK_SENT) | - (1 << USB_IN_ACK_RCVD) | - (1 << USB_OUT_PING_NAK_SENT) | - (1 << USB_OUT_ACK_SENT) | - (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) | - (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | - (1 << DATA_PACKET_RECEIVED_INTERRUPT) | - (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) | - (1 << DATA_OUT_PING_TOKEN_INTERRUPT) | - (1 << DATA_IN_TOKEN_INTERRUPT) - , &ep->regs->ep_stat); - } - u.raw[0] = readl(&dev->usb->setup0123); - u.raw[1] = readl(&dev->usb->setup4567); + if (ep->dev->pdev->device == 0x2280) + tmp = (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW); + else + tmp = 0; + + writel (tmp | (1 << TIMEOUT) + | (1 << USB_STALL_SENT) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_OUT_PING_NAK_SENT) + | (1 << USB_OUT_ACK_SENT) + | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_OUT_PING_TOKEN_INTERRUPT) + | (1 << DATA_IN_TOKEN_INTERRUPT) + , &ep->regs->ep_stat); + u.raw [0] = readl (&dev->usb->setup0123); + u.raw [1] = readl (&dev->usb->setup4567); cpu_to_le32s (&u.raw [0]); cpu_to_le32s (&u.raw [1]); - if (dev->pdev->vendor == 0x10b5) - defect7374_workaround(dev, u.r); - tmp = 0; #define w_value le16_to_cpu(u.r.wValue) @@ -3181,12 +2318,6 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) * everything else goes uplevel to the gadget code. */ ep->responded = 1; - - if (dev->gadget.speed == USB_SPEED_SUPER) { - handle_stat0_irqs_superspeed(dev, ep, u.r); - goto next_endpoints; - } - switch (u.r.bRequest) { case USB_REQ_GET_STATUS: { struct net2280_ep *e; @@ -3229,11 +2360,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) VDEBUG(dev, "%s wedged, halt not cleared\n", ep->ep.name); } else { - VDEBUG(dev, "%s clear halt\n", e->ep.name); + VDEBUG(dev, "%s clear halt\n", ep->ep.name); clear_halt(e); - if (ep->dev->pdev->vendor == 0x10b5 && - !list_empty(&e->queue) && e->td_dma) - restart_dma(e); } allow_status (ep); goto next_endpoints; @@ -3253,8 +2381,6 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (e->ep.name == ep0name) goto do_stall; set_halt (e); - if (dev->pdev->vendor == 0x10b5 && e->dma) - abort_dma(e); allow_status (ep); VDEBUG (dev, "%s set halt\n", ep->ep.name); goto next_endpoints; @@ -3266,7 +2392,7 @@ delegate: "ep_cfg %08x\n", u.r.bRequestType, u.r.bRequest, w_value, w_index, w_length, - readl(&ep->cfg->ep_cfg)); + readl (&ep->regs->ep_cfg)); ep->responded = 0; spin_unlock (&dev->lock); tmp = dev->driver->setup (&dev->gadget, &u.r); @@ -3329,7 +2455,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) /* after disconnect there's nothing else to do! */ tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); - mask = (1 << SUPER_SPEED) | (1 << HIGH_SPEED) | (1 << FULL_SPEED); + mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and @@ -3420,19 +2546,12 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) tmp = readl (&dma->dmastat); writel (tmp, &dma->dmastat); - /* dma sync*/ - if (dev->pdev->vendor == 0x10b5) { - u32 r_dmacount = readl(&dma->dmacount); - if (!ep->is_in && (r_dmacount & 0x00FFFFFF) && - (tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))) - continue; - } - /* chaining should stop on abort, short OUT from fifo, * or (stat0 codepath) short OUT transfer. */ if (!use_dma_chaining) { - if (!(tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))) { + if ((tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT)) + == 0) { DEBUG (ep->dev, "%s no xact done? %08x\n", ep->ep.name, tmp); continue; @@ -3506,8 +2625,7 @@ static irqreturn_t net2280_irq (int irq, void *_dev) struct net2280 *dev = _dev; /* shared interrupt, not ours */ - if (dev->pdev->vendor == 0x17cc && - (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))) + if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED))) return IRQ_NONE; spin_lock (&dev->lock); @@ -3518,13 +2636,6 @@ static irqreturn_t net2280_irq (int irq, void *_dev) /* control requests and PIO */ handle_stat0_irqs (dev, readl (&dev->regs->irqstat0)); - if (dev->pdev->vendor == 0x10b5) { - /* re-enable interrupt to trigger any possible new interrupt */ - u32 pciirqenb1 = readl(&dev->regs->pciirqenb1); - writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1); - writel(pciirqenb1, &dev->regs->pciirqenb1); - } - spin_unlock (&dev->lock); return IRQ_HANDLED; @@ -3563,8 +2674,6 @@ static void net2280_remove (struct pci_dev *pdev) } if (dev->got_irq) free_irq (pdev->irq, dev); - if (use_msi && dev->pdev->vendor == 0x10b5) - pci_disable_msi(pdev); if (dev->regs) iounmap (dev->regs); if (dev->region) @@ -3599,8 +2708,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init (&dev->lock); dev->pdev = pdev; dev->gadget.ops = &net2280_ops; - dev->gadget.max_speed = (dev->pdev->vendor == 0x10b5) ? - USB_SPEED_SUPER : USB_SPEED_HIGH; + dev->gadget.max_speed = USB_SPEED_HIGH; /* the "gadget" abstracts/virtualizes the controller */ dev->gadget.name = driver_name; @@ -3642,39 +2750,8 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200); dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300); - if (dev->pdev->vendor == 0x10b5) { - u32 fsmvalue; - u32 usbstat; - dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *) - (base + 0x00b4); - dev->fiforegs = (struct usb338x_fifo_regs __iomem *) - (base + 0x0500); - dev->llregs = (struct usb338x_ll_regs __iomem *) - (base + 0x0700); - dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *) - (base + 0x0748); - dev->ll_tsn_regs = (struct usb338x_ll_tsn_regs __iomem *) - (base + 0x077c); - dev->ll_chicken_reg = (struct usb338x_ll_chi_regs __iomem *) - (base + 0x079c); - dev->plregs = (struct usb338x_pl_regs __iomem *) - (base + 0x0800); - usbstat = readl(&dev->usb->usbstat); - dev->enhanced_mode = (usbstat & (1 << 11)) ? 1 : 0; - dev->n_ep = (dev->enhanced_mode) ? 9 : 5; - /* put into initial config, link up all endpoints */ - fsmvalue = get_idx_reg(dev->regs, SCRATCH) & - (0xf << DEFECT7374_FSM_FIELD); - /* See if firmware needs to set up for workaround: */ - if (fsmvalue == DEFECT7374_FSM_SS_CONTROL_READ) - writel(0, &dev->usb->usbctl); - } else{ - dev->enhanced_mode = 0; - dev->n_ep = 7; - /* put into initial config, link up all endpoints */ - writel(0, &dev->usb->usbctl); - } - + /* put into initial config, link up all endpoints */ + writel (0, &dev->usb->usbctl); usb_reset (dev); usb_reinit (dev); @@ -3685,10 +2762,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) goto done; } - if (use_msi && dev->pdev->vendor == 0x10b5) - if (pci_enable_msi(pdev)) - ERROR(dev, "Failed to enable MSI mode\n"); - if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev) != 0) { ERROR (dev, "request interrupt %d failed\n", pdev->irq); @@ -3724,8 +2797,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) } /* enable lower-overhead pci memory bursts during DMA */ - if (dev->pdev->vendor == 0x17cc) - writel((1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) + writel ( (1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE) // 256 write retries may not be enough... // | (1 << PCI_RETRY_ABORT_ENABLE) | (1 << DMA_READ_MULTIPLE_ENABLE) @@ -3742,10 +2814,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) INFO (dev, "%s\n", driver_desc); INFO (dev, "irq %d, pci mem %p, chip rev %04x\n", pdev->irq, base, dev->chiprev); - INFO(dev, "version: " DRIVER_VERSION "; dma %s %s\n", - use_dma ? (use_dma_chaining ? "chaining" : "enabled") - : "disabled", - dev->enhanced_mode ? "enhanced mode" : "legacy mode"); + INFO (dev, "version: " DRIVER_VERSION "; dma %s\n", + use_dma + ? (use_dma_chaining ? "chaining" : "enabled") + : "disabled"); retval = device_create_file (&pdev->dev, &dev_attr_registers); if (retval) goto done; @@ -3777,8 +2849,7 @@ static void net2280_shutdown (struct pci_dev *pdev) writel (0, &dev->usb->usbctl); /* Disable full-speed test mode */ - if (dev->pdev->vendor == 0x17cc) - writel(0, &dev->usb->xcvrdiag); + writel(0, &dev->usb->xcvrdiag); } @@ -3798,24 +2869,8 @@ static const struct pci_device_id pci_ids [] = { { .device = 0x2282, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, -}, - { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x10b5, - .device = 0x3380, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, - { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x10b5, - .device = 0x3382, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - }, -{ /* end: all zeroes */ } + +}, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE (pci, pci_ids); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index f32c2746b6ae..a844be0d683a 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -6,7 +6,6 @@ /* * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) * Copyright (C) 2003 David Brownell - * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,7 +14,6 @@ */ #include -#include /*-------------------------------------------------------------------------*/ @@ -61,13 +59,6 @@ set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) #define CHIPREV_1 0x0100 #define CHIPREV_1A 0x0110 -/* DEFECT 7374 */ -#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS 200 -#define DEFECT_7374_PROCESSOR_WAIT_TIME 10 - -/* ep0 max packet size */ -#define EP0_SS_MAX_PACKET_SIZE 0x200 -#define EP0_HS_MAX_PACKET_SIZE 0x40 #ifdef __KERNEL__ /* ep a-f highspeed and fullspeed maxpacket, addresses @@ -94,15 +85,12 @@ struct net2280_dma { struct net2280_ep { struct usb_ep ep; - struct net2280_ep_regs __iomem *cfg; struct net2280_ep_regs __iomem *regs; struct net2280_dma_regs __iomem *dma; struct net2280_dma *dummy; - struct usb338x_fifo_regs __iomem *fiforegs; dma_addr_t td_dma; /* of dummy */ struct net2280 *dev; unsigned long irqs; - unsigned is_halt:1, dma_started:1; /* analogous to a host-side qh */ struct list_head queue; @@ -128,19 +116,10 @@ static inline void allow_status (struct net2280_ep *ep) ep->stopped = 1; } -static void allow_status_338x(struct net2280_ep *ep) +/* count (<= 4) bytes in the next fifo write will be valid */ +static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) { - /* - * Control Status Phase Handshake was set by the chip when the setup - * packet arrived. While set, the chip automatically NAKs the host's - * Status Phase tokens. - */ - writel(1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE, &ep->regs->ep_rsp); - - ep->stopped = 1; - - /* TD 9.9 Halt Endpoint test. TD 9.22 set feature test. */ - ep->responded = 0; + writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); } struct net2280_request { @@ -156,38 +135,23 @@ struct net2280 { /* each pci device provides one gadget, several endpoints */ struct usb_gadget gadget; spinlock_t lock; - struct net2280_ep ep[9]; + struct net2280_ep ep [7]; struct usb_gadget_driver *driver; unsigned enabled : 1, protocol_stall : 1, softconnect : 1, got_irq : 1, - region:1, - u1_enable:1, - u2_enable:1, - ltm_enable:1, - wakeup_enable:1, - selfpowered:1, - addressed_state:1; + region : 1; u16 chiprev; - int enhanced_mode; - int n_ep; /* pci state used to access those endpoints */ struct pci_dev *pdev; struct net2280_regs __iomem *regs; struct net2280_usb_regs __iomem *usb; - struct usb338x_usb_ext_regs __iomem *usb_ext; struct net2280_pci_regs __iomem *pci; struct net2280_dma_regs __iomem *dma; struct net2280_dep_regs __iomem *dep; struct net2280_ep_regs __iomem *epregs; - struct usb338x_fifo_regs __iomem *fiforegs; - struct usb338x_ll_regs __iomem *llregs; - struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; - struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; - struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; - struct usb338x_pl_regs __iomem *plregs; struct pci_pool *requests; // statistics... @@ -215,43 +179,6 @@ static inline void clear_halt (struct net2280_ep *ep) , &ep->regs->ep_rsp); } -/* - * FSM value for Defect 7374 (U1U2 Test) is managed in - * chip's SCRATCH register: - */ -#define DEFECT7374_FSM_FIELD 28 - -/* Waiting for Control Read: - * - A transition to this state indicates a fresh USB connection, - * before the first Setup Packet. The connection speed is not - * known. Firmware is waiting for the first Control Read. - * - Starting state: This state can be thought of as the FSM's typical - * starting state. - * - Tip: Upon the first SS Control Read the FSM never - * returns to this state. - */ -#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ (1 << DEFECT7374_FSM_FIELD) - -/* Non-SS Control Read: - * - A transition to this state indicates detection of the first HS - * or FS Control Read. - * - Tip: Upon the first SS Control Read the FSM never - * returns to this state. - */ -#define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD) - -/* SS Control Read: - * - A transition to this state indicates detection of the - * first SS Control Read. - * - This state indicates workaround completion. Workarounds no longer - * need to be applied (as long as the chip remains powered up). - * - Tip: Once in this state the FSM state does not change (until - * the chip's power is lost and restored). - * - This can be thought of as the final state of the FSM; - * the FSM 'locks-up' in this state until the chip loses power. - */ -#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD) - #ifdef USE_RDK_LEDS static inline void net2280_led_init (struct net2280 *dev) @@ -271,9 +198,6 @@ void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) { u32 val = readl (&dev->regs->gpioctl); switch (speed) { - case USB_SPEED_SUPER: /* green + red */ - val |= (1 << GPIO0_DATA) | (1 << GPIO1_DATA); - break; case USB_SPEED_HIGH: /* green */ val &= ~(1 << GPIO0_DATA); val |= (1 << GPIO1_DATA); @@ -347,17 +271,6 @@ static inline void net2280_led_shutdown (struct net2280 *dev) /*-------------------------------------------------------------------------*/ -static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count) -{ - if (ep->dev->pdev->vendor == 0x17cc) - writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); - else{ - u32 tmp = readl(&ep->cfg->ep_cfg) & - (~(0x07 << EP_FIFO_BYTE_COUNT)); - writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg); - } -} - static inline void start_out_naking (struct net2280_ep *ep) { /* NOTE: hardware races lurk here, and PING protocol issues */ diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h deleted file mode 100644 index f92eb635b9d3..000000000000 --- a/include/linux/usb/usb338x.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * USB 338x super/high/full speed USB device controller. - * Unlike many such controllers, this one talks PCI. - * - * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) - * Copyright (C) 2003 David Brownell - * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __LINUX_USB_USB338X_H -#define __LINUX_USB_USB338X_H - -#include - -/* - * Extra defined bits for net2280 registers - */ -#define SCRATCH 0x0b - -#define DEFECT7374_FSM_FIELD 28 -#define SUPER_SPEED 8 -#define DMA_REQUEST_OUTSTANDING 5 -#define DMA_PAUSE_DONE_INTERRUPT 26 -#define SET_ISOCHRONOUS_DELAY 24 -#define SET_SEL 22 -#define SUPER_SPEED_MODE 8 - -/*ep_cfg*/ -#define MAX_BURST_SIZE 24 -#define EP_FIFO_BYTE_COUNT 16 -#define IN_ENDPOINT_ENABLE 14 -#define IN_ENDPOINT_TYPE 12 -#define OUT_ENDPOINT_ENABLE 10 -#define OUT_ENDPOINT_TYPE 8 - -struct usb338x_usb_ext_regs { - u32 usbclass; -#define DEVICE_PROTOCOL 16 -#define DEVICE_SUB_CLASS 8 -#define DEVICE_CLASS 0 - u32 ss_sel; -#define U2_SYSTEM_EXIT_LATENCY 8 -#define U1_SYSTEM_EXIT_LATENCY 0 - u32 ss_del; -#define U2_DEVICE_EXIT_LATENCY 8 -#define U1_DEVICE_EXIT_LATENCY 0 - u32 usb2lpm; -#define USB_L1_LPM_HIRD 2 -#define USB_L1_LPM_REMOTE_WAKE 1 -#define USB_L1_LPM_SUPPORT 0 - u32 usb3belt; -#define BELT_MULTIPLIER 10 -#define BEST_EFFORT_LATENCY_TOLERANCE 0 - u32 usbctl2; -#define LTM_ENABLE 7 -#define U2_ENABLE 6 -#define U1_ENABLE 5 -#define FUNCTION_SUSPEND 4 -#define USB3_CORE_ENABLE 3 -#define USB2_CORE_ENABLE 2 -#define SERIAL_NUMBER_STRING_ENABLE 0 - u32 in_timeout; -#define GPEP3_TIMEOUT 19 -#define GPEP2_TIMEOUT 18 -#define GPEP1_TIMEOUT 17 -#define GPEP0_TIMEOUT 16 -#define GPEP3_TIMEOUT_VALUE 13 -#define GPEP3_TIMEOUT_ENABLE 12 -#define GPEP2_TIMEOUT_VALUE 9 -#define GPEP2_TIMEOUT_ENABLE 8 -#define GPEP1_TIMEOUT_VALUE 5 -#define GPEP1_TIMEOUT_ENABLE 4 -#define GPEP0_TIMEOUT_VALUE 1 -#define GPEP0_TIMEOUT_ENABLE 0 - u32 isodelay; -#define ISOCHRONOUS_DELAY 0 -} __packed; - -struct usb338x_fifo_regs { - /* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */ - u32 ep_fifo_size_base; -#define IN_FIFO_BASE_ADDRESS 22 -#define IN_FIFO_SIZE 16 -#define OUT_FIFO_BASE_ADDRESS 6 -#define OUT_FIFO_SIZE 0 - u32 ep_fifo_out_wrptr; - u32 ep_fifo_out_rdptr; - u32 ep_fifo_in_wrptr; - u32 ep_fifo_in_rdptr; - u32 unused[3]; -} __packed; - - -/* Link layer */ -struct usb338x_ll_regs { - /* offset 0x700 */ - u32 ll_ltssm_ctrl1; - u32 ll_ltssm_ctrl2; - u32 ll_ltssm_ctrl3; - u32 unused[2]; - u32 ll_general_ctrl0; - u32 ll_general_ctrl1; -#define PM_U3_AUTO_EXIT 29 -#define PM_U2_AUTO_EXIT 28 -#define PM_U1_AUTO_EXIT 27 -#define PM_FORCE_U2_ENTRY 26 -#define PM_FORCE_U1_ENTRY 25 -#define PM_LGO_COLLISION_SEND_LAU 24 -#define PM_DIR_LINK_REJECT 23 -#define PM_FORCE_LINK_ACCEPT 22 -#define PM_DIR_ENTRY_U3 20 -#define PM_DIR_ENTRY_U2 19 -#define PM_DIR_ENTRY_U1 18 -#define PM_U2_ENABLE 17 -#define PM_U1_ENABLE 16 -#define SKP_THRESHOLD_ADJUST_FMW 8 -#define RESEND_DPP_ON_LRTY_FMW 7 -#define DL_BIT_VALUE_FMW 6 -#define FORCE_DL_BIT 5 - u32 ll_general_ctrl2; -#define SELECT_INVERT_LANE_POLARITY 7 -#define FORCE_INVERT_LANE_POLARITY 6 - u32 ll_general_ctrl3; - u32 ll_general_ctrl4; - u32 ll_error_gen; -} __packed; - -struct usb338x_ll_lfps_regs { - /* offset 0x748 */ - u32 ll_lfps_5; -#define TIMER_LFPS_6US 16 - u32 ll_lfps_6; -#define TIMER_LFPS_80US 0 -} __packed; - -struct usb338x_ll_tsn_regs { - /* offset 0x77C */ - u32 ll_tsn_counters_2; -#define HOT_TX_NORESET_TS2 24 - u32 ll_tsn_counters_3; -#define HOT_RX_RESET_TS2 0 -} __packed; - -struct usb338x_ll_chi_regs { - /* offset 0x79C */ - u32 ll_tsn_chicken_bit; -#define RECOVERY_IDLE_TO_RECOVER_FMW 3 -} __packed; - -/* protocol layer */ -struct usb338x_pl_regs { - /* offset 0x800 */ - u32 pl_reg_1; - u32 pl_reg_2; - u32 pl_reg_3; - u32 pl_reg_4; - u32 pl_ep_ctrl; - /* Protocol Layer Endpoint Control*/ -#define PL_EP_CTRL 0x810 -#define ENDPOINT_SELECT 0 - /* [4:0] */ -#define EP_INITIALIZED 16 -#define SEQUENCE_NUMBER_RESET 17 -#define CLEAR_ACK_ERROR_CODE 20 - u32 pl_reg_6; - u32 pl_reg_7; - u32 pl_reg_8; - u32 pl_ep_status_1; - /* Protocol Layer Endpoint Status 1*/ -#define PL_EP_STATUS_1 0x820 -#define STATE 16 -#define ACK_GOOD_NORMAL 0x11 -#define ACK_GOOD_MORE_ACKS_TO_COME 0x16 - u32 pl_ep_status_2; - u32 pl_ep_status_3; - /* Protocol Layer Endpoint Status 3*/ -#define PL_EP_STATUS_3 0x828 -#define SEQUENCE_NUMBER 0 - u32 pl_ep_status_4; - /* Protocol Layer Endpoint Status 4*/ -#define PL_EP_STATUS_4 0x82c - u32 pl_ep_cfg_4; - /* Protocol Layer Endpoint Configuration 4*/ -#define PL_EP_CFG_4 0x830 -#define NON_CTRL_IN_TOLERATE_BAD_DIR 6 -} __packed; - -#endif /* __LINUX_USB_USB338X_H */ From f9da25c798ae7d89a25918cc897c17abb1490e13 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Wed, 28 May 2014 10:06:24 -0600 Subject: [PATCH 300/314] usb: host: max3421-hcd: Fix potential NULL urb dereference Reported-by: Dan Carpenter Signed-off-by: David Mosberger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index dfc74d6738db..28abda14c5e2 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -588,12 +588,14 @@ max3421_next_transfer(struct usb_hcd *hcd, int fast_retransmit) { struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct urb *urb = max3421_hcd->curr_urb; - struct max3421_ep *max3421_ep = urb->ep->hcpriv; + struct max3421_ep *max3421_ep; int cmd = -EINVAL; if (!urb) return; /* nothing to do */ + max3421_ep = urb->ep->hcpriv; + switch (max3421_ep->pkt_state) { case PKT_STATE_SETUP: cmd = max3421_ctrl_setup(hcd, urb); From 94adcdce0d340e06eb9187cad70555d2e8a201f3 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 28 May 2014 20:22:58 +0900 Subject: [PATCH 301/314] usb: host: xhci-plat: add xhci_plat_start() Some platforms (such as the Renesas R-Car) need to initialize some specific registers after xhci driver calls usb_add_hcd() and before the driver calls xhci_run(). So, this patch adds the xhci_plat_start() function. Acked-by: Geert Uytterhoeven Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 39c367393eed..29d8adb5c8d1 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -37,6 +37,11 @@ static int xhci_plat_setup(struct usb_hcd *hcd) return xhci_gen_setup(hcd, xhci_plat_quirks); } +static int xhci_plat_start(struct usb_hcd *hcd) +{ + return xhci_run(hcd); +} + static const struct hc_driver xhci_plat_xhci_driver = { .description = "xhci-hcd", .product_desc = "xHCI Host Controller", @@ -52,7 +57,7 @@ static const struct hc_driver xhci_plat_xhci_driver = { * basic lifecycle operations */ .reset = xhci_plat_setup, - .start = xhci_run, + .start = xhci_plat_start, .stop = xhci_stop, .shutdown = xhci_shutdown, From c7c1ce8061c0dc5b848e5df0ba459dbbf78057d7 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 28 May 2014 20:23:26 +0900 Subject: [PATCH 302/314] Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2 This commit extends the compatible string list of the xhci-platform binding with the new "renesas,xhci-r8a7790" and "renesas,xhci-r8a7791" compatible strings. It is used to describe the xHCI controller which is available in the R-Car H2 and M2 SoCs. Acked-by: Geert Uytterhoeven Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 999be5ca901c..5a79377c6a96 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -2,7 +2,8 @@ USB xHCI controllers Required properties: - compatible: should be one of "generic-xhci", - "marvell,armada-375-xhci", "marvell,armada-380-xhci" (deprecated: + "marvell,armada-375-xhci", "marvell,armada-380-xhci", + "renesas,xhci-r8a7790", "renesas,xhci-r8a7791" (deprecated: "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. From ff1fcd50bc2459744e6f948310bc18eb7d6e8c72 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Wed, 28 May 2014 21:13:51 +0200 Subject: [PATCH 303/314] usb: qcserial: add Netgear AirCard 341U Signed-off-by: Aleksander Morgado Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index ca7b43092439..9c8b6ee1d21d 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -144,6 +144,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */ {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */ {DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */ + {DEVICE_SWI(0x1199, 0x9055)}, /* Netgear AirCard 341U */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ From 00c5aa178a5ba217a4143f8a5f70630550a87600 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Wed, 28 May 2014 16:09:16 -0600 Subject: [PATCH 304/314] usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue() Reported-by: Dan Carpenter Signed-off-by: David Mosberger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index 28abda14c5e2..714f99faa14a 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1545,8 +1545,10 @@ max3421_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (!max3421_ep) { /* gets freed in max3421_endpoint_disable: */ max3421_ep = kzalloc(sizeof(struct max3421_ep), mem_flags); - if (!max3421_ep) - return -ENOMEM; + if (!max3421_ep) { + retval = -ENOMEM; + goto out; + } max3421_ep->ep = urb->ep; max3421_ep->last_active = max3421_hcd->frame_number; urb->ep->hcpriv = max3421_ep; @@ -1561,6 +1563,7 @@ max3421_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) wake_up_process(max3421_hcd->spi_thread); } +out: spin_unlock_irqrestore(&max3421_hcd->lock, flags); return retval; } From 05dfa5c9bc37933181b619e42ec0eeb41ef31362 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Wed, 28 May 2014 22:40:00 -0600 Subject: [PATCH 305/314] usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning kmalloc the SPI rx and tx data buffers. This appears to be the only portable way to guarantee that the buffers are DMA-safe (e.g., in separate DMA cache-lines). This patch makes the spi_rdX()/spi_wrX() non-reentrant, but that's OK because calls to them are guaranteed to be serialized by the per-HCD SPI-thread. Reported-by: kbuild test robot Signed-off-by: David Mosberger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 94 ++++++++++++++++++++++------------ 1 file changed, 60 insertions(+), 34 deletions(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index 714f99faa14a..ccb1bc42b4d2 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -102,6 +102,10 @@ enum scheduling_pass { SCHED_PASS_DONE }; +struct max3421_dma_buf { + u8 data[2]; +}; + struct max3421_hcd { spinlock_t lock; @@ -123,6 +127,12 @@ struct max3421_hcd { */ u8 rev; /* chip revision */ u16 frame_number; + /* + * kmalloc'd buffers guaranteed to be in separate (DMA) + * cache-lines: + */ + struct max3421_dma_buf *tx; + struct max3421_dma_buf *rx; /* * URB we're currently processing. Must not be reset to NULL * unless MAX3421E chip is idle: @@ -332,51 +342,47 @@ max3421_to_hcd(struct max3421_hcd *max3421_hcd) static u8 spi_rd8(struct usb_hcd *hcd, unsigned int reg) { + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct spi_device *spi = to_spi_device(hcd->self.controller); struct spi_transfer transfer; - u8 tx_data[1]; - /* - * RX data must be in its own cache-line so it stays flushed - * from the cache until the transfer is complete. Otherwise, - * we get stale data from the cache. - */ - u8 rx_data[SMP_CACHE_BYTES] ____cacheline_aligned; struct spi_message msg; memset(&transfer, 0, sizeof(transfer)); spi_message_init(&msg); - tx_data[0] = (field(reg, MAX3421_SPI_REG_SHIFT) | - field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); - transfer.tx_buf = tx_data; - transfer.rx_buf = rx_data; + transfer.tx_buf = max3421_hcd->tx->data; + transfer.rx_buf = max3421_hcd->rx->data; transfer.len = 2; spi_message_add_tail(&transfer, &msg); spi_sync(spi, &msg); - return rx_data[1]; + return max3421_hcd->rx->data[1]; } static void spi_wr8(struct usb_hcd *hcd, unsigned int reg, u8 val) { struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct spi_transfer transfer; struct spi_message msg; - u8 tx_data[2]; memset(&transfer, 0, sizeof(transfer)); spi_message_init(&msg); - tx_data[0] = (field(reg, MAX3421_SPI_REG_SHIFT) | - field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); - tx_data[1] = val; + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); + max3421_hcd->tx->data[1] = val; - transfer.tx_buf = tx_data; + transfer.tx_buf = max3421_hcd->tx->data; transfer.len = 2; spi_message_add_tail(&transfer, &msg); @@ -387,18 +393,18 @@ static void spi_rd_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len) { struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct spi_transfer transfer[2]; struct spi_message msg; - u8 cmd; memset(transfer, 0, sizeof(transfer)); spi_message_init(&msg); - cmd = (field(reg, MAX3421_SPI_REG_SHIFT) | - field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); - - transfer[0].tx_buf = &cmd; + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); + transfer[0].tx_buf = max3421_hcd->tx->data; transfer[0].len = 1; transfer[1].rx_buf = buf; @@ -413,18 +419,19 @@ static void spi_wr_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len) { struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct spi_transfer transfer[2]; struct spi_message msg; - u8 cmd; memset(transfer, 0, sizeof(transfer)); spi_message_init(&msg); - cmd = (field(reg, MAX3421_SPI_REG_SHIFT) | - field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); - transfer[0].tx_buf = &cmd; + transfer[0].tx_buf = max3421_hcd->tx->data; transfer[0].len = 1; transfer[1].tx_buf = buf; @@ -1834,8 +1841,8 @@ static int max3421_probe(struct spi_device *spi) { struct max3421_hcd *max3421_hcd; - struct usb_hcd *hcd; - int retval; + struct usb_hcd *hcd = NULL; + int retval = -ENOMEM; if (spi_setup(spi) < 0) { dev_err(&spi->dev, "Unable to setup SPI bus"); @@ -1846,7 +1853,7 @@ max3421_probe(struct spi_device *spi) dev_name(&spi->dev)); if (!hcd) { dev_err(&spi->dev, "failed to create HCD structure\n"); - return -ENOMEM; + goto error; } set_bit(HCD_FLAG_POLL_RH, &hcd->flags); max3421_hcd = hcd_to_max3421(hcd); @@ -1854,29 +1861,48 @@ max3421_probe(struct spi_device *spi) max3421_hcd_list = max3421_hcd; INIT_LIST_HEAD(&max3421_hcd->ep_list); + max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL); + if (!max3421_hcd->tx) { + dev_err(&spi->dev, "failed to kmalloc tx buffer\n"); + goto error; + } + max3421_hcd->rx = kmalloc(sizeof(*max3421_hcd->rx), GFP_KERNEL); + if (!max3421_hcd->rx) { + dev_err(&spi->dev, "failed to kmalloc rx buffer\n"); + goto error; + } + max3421_hcd->spi_thread = kthread_run(max3421_spi_thread, hcd, "max3421_spi_thread"); if (max3421_hcd->spi_thread == ERR_PTR(-ENOMEM)) { dev_err(&spi->dev, "failed to create SPI thread (out of memory)\n"); - return -ENOMEM; + goto error; } retval = usb_add_hcd(hcd, 0, 0); if (retval) { dev_err(&spi->dev, "failed to add HCD\n"); - usb_put_hcd(hcd); - return retval; + goto error; } retval = request_irq(spi->irq, max3421_irq_handler, IRQF_TRIGGER_LOW, "max3421", hcd); if (retval < 0) { - usb_put_hcd(hcd); dev_err(&spi->dev, "failed to request irq %d\n", spi->irq); - return retval; + goto error; } return 0; + +error: + if (hcd) { + kfree(max3421_hcd->tx); + kfree(max3421_hcd->rx); + if (max3421_hcd->spi_thread) + kthread_stop(max3421_hcd->spi_thread); + usb_put_hcd(hcd); + } + return retval; } static int From 4055e5e54ecea4a41edec42f6bd4ee274892e872 Mon Sep 17 00:00:00 2001 From: David Mosberger-Tang Date: Thu, 29 May 2014 10:23:55 -0600 Subject: [PATCH 306/314] usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity Signed-off-by: Davidm Mosberger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 6 ++++-- include/linux/platform_data/max3421-hcd.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index ccb1bc42b4d2..fd3ed994fa4d 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1717,7 +1717,8 @@ max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index, break; case USB_PORT_FEAT_POWER: dev_dbg(hcd->self.controller, "power-off\n"); - max3421_gpout_set_value(hcd, pdata->vbus_gpout, 0); + max3421_gpout_set_value(hcd, pdata->vbus_gpout, + !pdata->vbus_active_level); /* FALLS THROUGH */ default: max3421_hcd->port_status &= ~(1 << value); @@ -1766,7 +1767,8 @@ max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index, case USB_PORT_FEAT_POWER: dev_dbg(hcd->self.controller, "power-on\n"); max3421_hcd->port_status |= USB_PORT_STAT_POWER; - max3421_gpout_set_value(hcd, pdata->vbus_gpout, 1); + max3421_gpout_set_value(hcd, pdata->vbus_gpout, + pdata->vbus_active_level); break; case USB_PORT_FEAT_RESET: max3421_reset_port(hcd); diff --git a/include/linux/platform_data/max3421-hcd.h b/include/linux/platform_data/max3421-hcd.h index 4ad459605d87..0303d1970084 100644 --- a/include/linux/platform_data/max3421-hcd.h +++ b/include/linux/platform_data/max3421-hcd.h @@ -18,6 +18,7 @@ */ struct max3421_hcd_platform_data { u8 vbus_gpout; /* pin controlling Vbus */ + u8 vbus_active_level; /* level that turns on power */ }; #endif /* MAX3421_HCD_PLAT_H_INCLUDED */ From 7df45d5fc2c951ad89c90d7b201b08eb006c11d9 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 29 May 2014 17:21:01 +0530 Subject: [PATCH 307/314] usb: host: max3421-hcd: Use module_spi_driver module_spi_driver simplifies the code by eliminating boilerplate code. Signed-off-by: Sachin Kamat Acked-by: David Mosberger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index fd3ed994fa4d..858efcfda50b 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1950,20 +1950,7 @@ static struct spi_driver max3421_driver = { }, }; -static int __init -max3421_mod_init(void) -{ - return spi_register_driver(&max3421_driver); -} - -static void __exit -max3421_mod_exit(void) -{ - spi_unregister_driver(&max3421_driver); -} - -module_init(max3421_mod_init); -module_exit(max3421_mod_exit); +module_spi_driver(max3421_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("David Mosberger "); From 0ce5fb58564fd85aa8fd2d24209900e2e845317b Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Thu, 29 May 2014 13:33:27 +0200 Subject: [PATCH 308/314] usb: qcserial: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2 Cc: # backport in link above Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 9c8b6ee1d21d..b2aa003bf411 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -142,9 +142,15 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x1199, 0x68c0)}, /* Sierra Wireless MC73xx */ {DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */ {DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */ + {DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */ {DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */ + {DEVICE_SWI(0x1199, 0x9053)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9054)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x1199, 0x9055)}, /* Netgear AirCard 341U */ + {DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ From a36d5b618e7de03a3e34ae46603095fc00bdbc4e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 11:34:00 -0700 Subject: [PATCH 309/314] USB: media: redrat3: remove unneeded tracing macro The rr3_ftr function duplicates the in-kernel tracing logic, so remove it. This is step 1 of of removing the CONFIG_USB_DEBUG depandancy in this driver. Cc: Mauro Carvalho Chehab Cc: Sean Young Cc: Hans Verkuil Cc: Jonathan McCrohan Cc: James Hogan Signed-off-by: Greg Kroah-Hartman --- drivers/media/rc/redrat3.c | 39 ++------------------------------------ 1 file changed, 2 insertions(+), 37 deletions(-) diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 47cd373e2295..610c15ef4ae6 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -76,12 +76,6 @@ static int debug; dev_info(dev, fmt, ## __VA_ARGS__); \ } while (0) -#define rr3_ftr(dev, fmt, ...) \ - do { \ - if (debug & RR3_DEBUG_FUNCTION_TRACE) \ - dev_info(dev, fmt, ## __VA_ARGS__); \ - } while (0) - /* bulk data transfer types */ #define RR3_ERROR 0x01 #define RR3_MOD_SIGNAL_IN 0x20 @@ -237,8 +231,6 @@ static void redrat3_issue_async(struct redrat3_dev *rr3) { int res; - rr3_ftr(rr3->dev, "Entering %s\n", __func__); - res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC); if (res) rr3_dbg(rr3->dev, "%s: receive request FAILED! " @@ -377,8 +369,6 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) return; } - rr3_ftr(rr3->dev, "Entered %s\n", __func__); - dev = rr3->dev; /* Make sure we reset the IR kfifo after a bit of inactivity */ @@ -464,8 +454,6 @@ static int redrat3_enable_detector(struct redrat3_dev *rr3) struct device *dev = rr3->dev; u8 ret; - rr3_ftr(dev, "Entering %s\n", __func__); - ret = redrat3_send_cmd(RR3_RC_DET_ENABLE, rr3); if (ret != 0) dev_dbg(dev, "%s: unexpected ret of %d\n", @@ -486,7 +474,6 @@ static int redrat3_enable_detector(struct redrat3_dev *rr3) static inline void redrat3_delete(struct redrat3_dev *rr3, struct usb_device *udev) { - rr3_ftr(rr3->dev, "%s cleaning up\n", __func__); usb_kill_urb(rr3->read_urb); usb_kill_urb(rr3->flash_urb); usb_free_urb(rr3->read_urb); @@ -535,8 +522,6 @@ static void redrat3_reset(struct redrat3_dev *rr3) u8 *val; int len = sizeof(u8); - rr3_ftr(dev, "Entering %s\n", __func__); - rxpipe = usb_rcvctrlpipe(udev, 0); txpipe = usb_sndctrlpipe(udev, 0); @@ -572,8 +557,6 @@ static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) int rc = 0; char *buffer; - rr3_ftr(rr3->dev, "Entering %s\n", __func__); - buffer = kzalloc(sizeof(char) * (RR3_FW_VERSION_LEN + 1), GFP_KERNEL); if (!buffer) { dev_err(rr3->dev, "Memory allocation failure\n"); @@ -591,7 +574,6 @@ static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) dev_err(rr3->dev, "Problem fetching firmware ID\n"); kfree(buffer); - rr3_ftr(rr3->dev, "Exiting %s\n", __func__); } static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len) @@ -599,8 +581,6 @@ static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len) struct redrat3_header *header = rr3->bulk_in_buf; unsigned pktlen, pkttype; - rr3_ftr(rr3->dev, "Entering %s\n", __func__); - /* grab the Length and type of transfer */ pktlen = be16_to_cpu(header->length); pkttype = be16_to_cpu(header->transfer_type); @@ -637,8 +617,6 @@ static void redrat3_read_packet_continue(struct redrat3_dev *rr3, unsigned len) { void *irdata = &rr3->irdata; - rr3_ftr(rr3->dev, "Entering %s\n", __func__); - if (len + rr3->bytes_read > sizeof(rr3->irdata)) { dev_warn(rr3->dev, "too much data for packet\n"); rr3->bytes_read = 0; @@ -659,8 +637,6 @@ static int redrat3_get_ir_data(struct redrat3_dev *rr3, unsigned len) unsigned pkttype; int ret = 0; - rr3_ftr(dev, "Entering %s\n", __func__); - if (rr3->bytes_read == 0 && len >= sizeof(struct redrat3_header)) { redrat3_read_packet_start(rr3, len); } else if (rr3->bytes_read != 0) { @@ -705,8 +681,6 @@ static void redrat3_handle_async(struct urb *urb) return; } - rr3_ftr(rr3->dev, "Entering %s\n", __func__); - switch (urb->status) { case 0: ret = redrat3_get_ir_data(rr3, urb->actual_length); @@ -764,8 +738,6 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, u8 curlencheck = 0; unsigned i, sendbuf_len; - rr3_ftr(dev, "Entering %s\n", __func__); - if (rr3->transmitting) { dev_warn(dev, "%s: transmitter already in use\n", __func__); return -EAGAIN; @@ -957,8 +929,6 @@ static int redrat3_dev_probe(struct usb_interface *intf, int pipe, i; int retval = -ENOMEM; - rr3_ftr(dev, "%s called\n", __func__); - uhi = intf->cur_altsetting; /* find our bulk-in and bulk-out endpoints */ @@ -1074,7 +1044,6 @@ static int redrat3_dev_probe(struct usb_interface *intf, /* we can register the device now, as it is ready */ usb_set_intfdata(intf, rr3); - rr3_ftr(dev, "Exiting %s\n", __func__); return 0; led_free_error: @@ -1093,8 +1062,6 @@ static void redrat3_dev_disconnect(struct usb_interface *intf) struct usb_device *udev = interface_to_usbdev(intf); struct redrat3_dev *rr3 = usb_get_intfdata(intf); - rr3_ftr(&intf->dev, "Entering %s\n", __func__); - if (!rr3) return; @@ -1103,14 +1070,12 @@ static void redrat3_dev_disconnect(struct usb_interface *intf) led_classdev_unregister(&rr3->led); del_timer_sync(&rr3->rx_timeout); redrat3_delete(rr3, udev); - - rr3_ftr(&intf->dev, "RedRat3 IR Transceiver now disconnected\n"); } static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t message) { struct redrat3_dev *rr3 = usb_get_intfdata(intf); - rr3_ftr(rr3->dev, "suspend\n"); + led_classdev_suspend(&rr3->led); usb_kill_urb(rr3->read_urb); usb_kill_urb(rr3->flash_urb); @@ -1120,7 +1085,7 @@ static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t message) static int redrat3_dev_resume(struct usb_interface *intf) { struct redrat3_dev *rr3 = usb_get_intfdata(intf); - rr3_ftr(rr3->dev, "resume\n"); + if (usb_submit_urb(rr3->read_urb, GFP_ATOMIC)) return -EIO; led_classdev_resume(&rr3->led); From 3228bf81e08f2794d9448e391a0ab6ce2c5b2380 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 11:34:01 -0700 Subject: [PATCH 310/314] USB: media: redrat3: remove CONFIG_USB_DEBUG usage Use the dev_dbg dynamic infrastructure instead of rolling our own custom debug logic. This is needed as CONFIG_USB_DEBUG is now gone. Cc: Mauro Carvalho Chehab Cc: Sean Young Cc: Hans Verkuil Cc: Jonathan McCrohan Cc: James Hogan Signed-off-by: Greg Kroah-Hartman --- drivers/media/rc/redrat3.c | 63 +++++++++++++------------------------- 1 file changed, 21 insertions(+), 42 deletions(-) diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 610c15ef4ae6..79abbc8d9600 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -60,22 +60,6 @@ #define DRIVER_DESC "RedRat3 USB IR Transceiver Driver" #define DRIVER_NAME "redrat3" -/* module parameters */ -#ifdef CONFIG_USB_DEBUG -static int debug = 1; -#else -static int debug; -#endif - -#define RR3_DEBUG_STANDARD 0x1 -#define RR3_DEBUG_FUNCTION_TRACE 0x2 - -#define rr3_dbg(dev, fmt, ...) \ - do { \ - if (debug & RR3_DEBUG_STANDARD) \ - dev_info(dev, fmt, ## __VA_ARGS__); \ - } while (0) - /* bulk data transfer types */ #define RR3_ERROR 0x01 #define RR3_MOD_SIGNAL_IN 0x20 @@ -233,9 +217,9 @@ static void redrat3_issue_async(struct redrat3_dev *rr3) res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC); if (res) - rr3_dbg(rr3->dev, "%s: receive request FAILED! " - "(res %d, len %d)\n", __func__, res, - rr3->read_urb->transfer_buffer_length); + dev_dbg(rr3->dev, + "%s: receive request FAILED! (res %d, len %d)\n", + __func__, res, rr3->read_urb->transfer_buffer_length); } static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) @@ -351,7 +335,7 @@ static void redrat3_rx_timeout(unsigned long data) { struct redrat3_dev *rr3 = (struct redrat3_dev *)data; - rr3_dbg(rr3->dev, "calling ir_raw_event_reset\n"); + dev_dbg(rr3->dev, "calling ir_raw_event_reset\n"); ir_raw_event_reset(rr3->rc); } @@ -376,7 +360,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) mod_timer(&rr3->rx_timeout, jiffies + delay); mod_freq = redrat3_val_to_mod_freq(&rr3->irdata); - rr3_dbg(dev, "Got mod_freq of %u\n", mod_freq); + dev_dbg(dev, "Got mod_freq of %u\n", mod_freq); /* process each rr3 encoded byte into an int */ sig_size = be16_to_cpu(rr3->irdata.sig_size); @@ -398,7 +382,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) /* cap the value to IR_MAX_DURATION */ rawir.duration &= IR_MAX_DURATION; - rr3_dbg(dev, "storing %s with duration %d (i: %d)\n", + dev_dbg(dev, "storing %s with duration %d (i: %d)\n", rawir.pulse ? "pulse" : "space", rawir.duration, i); ir_raw_event_store_with_filter(rr3->rc, &rawir); } @@ -411,12 +395,12 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) rawir.duration = US_TO_NS(2800); else rawir.duration = trailer; - rr3_dbg(dev, "storing trailing space with duration %d\n", + dev_dbg(dev, "storing trailing space with duration %d\n", rawir.duration); ir_raw_event_store_with_filter(rr3->rc, &rawir); } - rr3_dbg(dev, "calling ir_raw_event_handle\n"); + dev_dbg(dev, "calling ir_raw_event_handle\n"); ir_raw_event_handle(rr3->rc); } @@ -506,7 +490,7 @@ static u32 redrat3_get_timeout(struct redrat3_dev *rr3) else { timeout = redrat3_len_to_us(be32_to_cpup(tmp)); - rr3_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000); + dev_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000); } kfree(tmp); @@ -535,19 +519,19 @@ static void redrat3_reset(struct redrat3_dev *rr3) rc = usb_control_msg(udev, rxpipe, RR3_RESET, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); - rr3_dbg(dev, "reset returned 0x%02x\n", rc); + dev_dbg(dev, "reset returned 0x%02x\n", rc); *val = 5; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); - rr3_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); + dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); *val = RR3_DRIVER_MAXLENS; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); - rr3_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); + dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); kfree(val); } @@ -602,12 +586,12 @@ static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len) case RR3_MOD_SIGNAL_IN: memcpy(&rr3->irdata, rr3->bulk_in_buf, len); rr3->bytes_read = len; - rr3_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", + dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read, pktlen); break; default: - rr3_dbg(rr3->dev, "ignoring packet with type 0x%02x, len of %d, 0x%02x\n", + dev_dbg(rr3->dev, "ignoring packet with type 0x%02x, len of %d, 0x%02x\n", pkttype, len, pktlen); break; } @@ -626,7 +610,7 @@ static void redrat3_read_packet_continue(struct redrat3_dev *rr3, unsigned len) memcpy(irdata + rr3->bytes_read, rr3->bulk_in_buf, len); rr3->bytes_read += len; - rr3_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read, + dev_dbg(rr3->dev, "bytes_read %d, pktlen %d\n", rr3->bytes_read, be16_to_cpu(rr3->irdata.header.length)); } @@ -657,7 +641,7 @@ static int redrat3_get_ir_data(struct redrat3_dev *rr3, unsigned len) if (pkttype == RR3_MOD_SIGNAL_IN) redrat3_process_ir_data(rr3); else - rr3_dbg(dev, "discarding non-signal data packet (type 0x%02x)\n", + dev_dbg(dev, "discarding non-signal data packet (type 0x%02x)\n", pkttype); out: @@ -717,7 +701,7 @@ static int redrat3_set_tx_carrier(struct rc_dev *rcdev, u32 carrier) struct redrat3_dev *rr3 = rcdev->priv; struct device *dev = rr3->dev; - rr3_dbg(dev, "Setting modulation frequency to %u", carrier); + dev_dbg(dev, "Setting modulation frequency to %u", carrier); if (carrier == 0) return -EINVAL; @@ -773,7 +757,7 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, break; } if (lencheck == curlencheck) { - rr3_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n", + dev_dbg(dev, "txbuf[%d]=%u, pos %d, enc %u\n", i, txbuf[i], curlencheck, cur_sample_len); if (curlencheck < RR3_DRIVER_MAXLENS) { /* now convert the value to a proper @@ -807,7 +791,7 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); ret = usb_bulk_msg(rr3->udev, pipe, irdata, sendbuf_len, &ret_len, 10 * HZ); - rr3_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret); + dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret); /* now tell the hardware to transmit what we sent it */ pipe = usb_rcvctrlpipe(rr3->udev, 0); @@ -941,7 +925,7 @@ static int redrat3_dev_probe(struct usb_interface *intf, ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && ((attrs & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) { - rr3_dbg(dev, "found bulk-in endpoint at 0x%02x\n", + dev_dbg(dev, "found bulk-in endpoint at 0x%02x\n", ep->bEndpointAddress); /* data comes in on 0x82, 0x81 is for other data... */ if (ep->bEndpointAddress == RR3_BULK_IN_EP_ADDR) @@ -952,7 +936,7 @@ static int redrat3_dev_probe(struct usb_interface *intf, ((addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && ((attrs & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) { - rr3_dbg(dev, "found bulk-out endpoint at 0x%02x\n", + dev_dbg(dev, "found bulk-out endpoint at 0x%02x\n", ep->bEndpointAddress); ep_out = ep; } @@ -1109,8 +1093,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_AUTHOR(DRIVER_AUTHOR2); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(usb, redrat3_dev_table); - -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable module debug spew. 0 = no debugging (default) " - "0x1 = standard debug messages, 0x2 = function tracing debug. " - "Flag bits are addative (i.e., 0x3 for both debug types)."); From 834b4d5136a8171066537b3c73c79863a50155cb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 11:34:02 -0700 Subject: [PATCH 311/314] USB: media: streamzap: remove CONFIG_USB_DEBUG MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It wasn't even being used for anything, so remove the test for the config option (as the config option isn't present anymore), and remove the unused module parameter "debug" so as to not confuse anyone. Cc: Mauro Carvalho Chehab Cc: James Hogan Cc: "Antti Seppälä" Signed-off-by: Greg Kroah-Hartman --- drivers/media/rc/streamzap.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index f4e0bc3d382c..bd5e4ff9e0ba 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -42,12 +42,6 @@ #define DRIVER_NAME "streamzap" #define DRIVER_DESC "Streamzap Remote Control driver" -#ifdef CONFIG_USB_DEBUG -static bool debug = 1; -#else -static bool debug; -#endif - #define USB_STREAMZAP_VENDOR_ID 0x0e9c #define USB_STREAMZAP_PRODUCT_ID 0x0000 @@ -528,6 +522,3 @@ module_usb_driver(streamzap_driver); MODULE_AUTHOR("Jarod Wilson "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debugging messages"); From cf24df6061b02063af19aba130d0fc4546959520 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 11:34:03 -0700 Subject: [PATCH 312/314] USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support The config option is gone, so port the driver over to using the dynamic debug infrastructure instead, like all other USB drivers. Cc: Jarod Wilson Cc: Mauro Carvalho Chehab Cc: Dan Carpenter Cc: Andy Shevchenko Cc: Andreea-Cristina Bernat Cc: Matina Maria Trompouki Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/lirc/lirc_igorplugusb.c | 30 +++++-------------- 1 file changed, 7 insertions(+), 23 deletions(-) diff --git a/drivers/staging/media/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c index f508a1372ad8..44b0d0766084 100644 --- a/drivers/staging/media/lirc/lirc_igorplugusb.c +++ b/drivers/staging/media/lirc/lirc_igorplugusb.c @@ -60,19 +60,6 @@ #define DRIVER_DESC "Igorplug USB remote driver for LIRC" #define DRIVER_NAME "lirc_igorplugusb" -/* debugging support */ -#ifdef CONFIG_USB_DEBUG -static bool debug = true; -#else -static bool debug; -#endif - -#define dprintk(fmt, args...) \ - do { \ - if (debug) \ - printk(KERN_DEBUG fmt, ## args); \ - } while (0) - /* One mode2 pulse/space has 4 bytes. */ #define CODE_LENGTH sizeof(int) @@ -237,7 +224,7 @@ static int unregister_from_lirc(struct igorplug *ir) return -EINVAL; } - dprintk(DRIVER_NAME "[%d]: calling lirc_unregister_driver\n", devnum); + dev_dbg(&ir->usbdev->dev, "calling lirc_unregister_driver\n"); lirc_unregister_driver(d->minor); return devnum; @@ -252,7 +239,7 @@ static int set_use_inc(void *data) return -EIO; } - dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum); + dev_dbg(&ir->usbdev->dev, "set use inc\n"); if (!ir->usbdev) return -ENODEV; @@ -269,7 +256,7 @@ static void set_use_dec(void *data) return; } - dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum); + dev_dbg(&ir->usbdev->dev, "set use dec\n"); } static void send_fragment(struct igorplug *ir, struct lirc_buffer *buf, @@ -321,7 +308,7 @@ static int igorplugusb_remote_poll(void *data, struct lirc_buffer *buf) if (ret < DEVICE_HEADERLEN) return -ENODATA; - dprintk(DRIVER_NAME ": Got %d bytes. Header: %*ph\n", + dev_dbg(&ir->usbdev->dev, "Got %d bytes. Header: %*ph\n", ret, 3, ir->buf_in); do_gettimeofday(&now); @@ -385,7 +372,7 @@ static int igorplugusb_remote_probe(struct usb_interface *intf, char buf[63], name[128] = ""; int ret; - dprintk(DRIVER_NAME ": usb probe called.\n"); + dev_dbg(&intf->dev, "%s: usb probe called.\n", __func__); dev = interface_to_usbdev(intf); @@ -405,8 +392,8 @@ static int igorplugusb_remote_probe(struct usb_interface *intf, devnum = dev->devnum; maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - dprintk(DRIVER_NAME "[%d]: bytes_in_key=%zu maxp=%d\n", - devnum, CODE_LENGTH, maxp); + dev_dbg(&intf->dev, "%s: bytes_in_key=%zu maxp=%d\n", + __func__, CODE_LENGTH, maxp); ir = devm_kzalloc(&intf->dev, sizeof(*ir), GFP_KERNEL); if (!ir) @@ -525,6 +512,3 @@ MODULE_DEVICE_TABLE(usb, igorplugusb_remote_id_table); module_param(sample_rate, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); From 70d2f61fc7559df3d5be32a9d01efdb9ee1b11d8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 May 2014 11:34:04 -0700 Subject: [PATCH 313/314] USB: orinoco_usb: remove CONFIG_USB_DEBUG support Now that the config option is gone, the driver needs to be converted over to using the dynamic_debug infrastructure, like all other USB drivers have been already. Cc: Christian Lamparter Cc: Larry Finger Cc: Gertjan van Wingerde Cc: Alexey Khoroshilov Cc: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman Acked-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco_usb.c | 50 ++++++++-------------- 1 file changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index f9805c9353d2..3ac71339d040 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -100,25 +100,11 @@ static struct ez_usb_fw firmware = { .code = NULL, }; -#ifdef CONFIG_USB_DEBUG -static int debug = 1; -#else -static int debug; -#endif - /* Debugging macros */ -#undef dbg -#define dbg(format, arg...) \ - do { if (debug) printk(KERN_DEBUG PFX "%s: " format "\n", \ - __func__ , ## arg); } while (0) #undef err #define err(format, arg...) \ do { printk(KERN_ERR PFX format "\n", ## arg); } while (0) -/* Module paramaters */ -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug enabled or not"); - MODULE_FIRMWARE("orinoco_ezusb_fw"); /* @@ -341,7 +327,7 @@ static void ezusb_request_timerfn(u_long _ctx) ctx->state = EZUSB_CTX_REQ_TIMEOUT; } else { ctx->state = EZUSB_CTX_RESP_TIMEOUT; - dbg("couldn't unlink"); + dev_dbg(&ctx->outurb->dev->dev, "couldn't unlink\n"); atomic_inc(&ctx->refcount); ctx->killed = 1; ezusb_ctx_complete(ctx); @@ -634,9 +620,9 @@ static void ezusb_request_in_callback(struct ezusb_priv *upriv, ctx = c; break; } - dbg("Skipped (0x%x/0x%x) (%d/%d)", - le16_to_cpu(ans->hermes_rid), - c->in_rid, ans->ans_reply_count, reply_count); + netdev_dbg(upriv->dev, "Skipped (0x%x/0x%x) (%d/%d)\n", + le16_to_cpu(ans->hermes_rid), c->in_rid, + ans->ans_reply_count, reply_count); } } @@ -768,7 +754,7 @@ static int ezusb_submit_in_urb(struct ezusb_priv *upriv) void *cur_buf = upriv->read_urb->transfer_buffer; if (upriv->read_urb->status == -EINPROGRESS) { - dbg("urb busy, not resubmiting"); + netdev_dbg(upriv->dev, "urb busy, not resubmiting\n"); retval = -EBUSY; goto exit; } @@ -838,8 +824,9 @@ static int ezusb_firmware_download(struct ezusb_priv *upriv, memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE); if (variant_offset >= addr && variant_offset < addr + FW_BUF_SIZE) { - dbg("Patching card_variant byte at 0x%04X", - variant_offset); + netdev_dbg(upriv->dev, + "Patching card_variant byte at 0x%04X\n", + variant_offset); fw_buffer[variant_offset - addr] = FW_VAR_VALUE; } retval = usb_control_msg(upriv->udev, @@ -879,7 +866,6 @@ static int ezusb_access_ltv(struct ezusb_priv *upriv, BUG_ON(in_irq()); if (!upriv->udev) { - dbg("Device disconnected"); retval = -ENODEV; goto exit; } @@ -1023,8 +1009,9 @@ static int ezusb_doicmd_wait(struct hermes *hw, u16 cmd, u16 parm0, u16 parm1, cpu_to_le16(parm1), cpu_to_le16(parm2), }; - dbg("0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X", - cmd, parm0, parm1, parm2); + netdev_dbg(upriv->dev, + "0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X\n", cmd, + parm0, parm1, parm2); ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); if (!ctx) return -ENOMEM; @@ -1045,7 +1032,7 @@ static int ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0, 0, 0, }; - dbg("0x%04X, parm0 0x%04X", cmd, parm0); + netdev_dbg(upriv->dev, "0x%04X, parm0 0x%04X\n", cmd, parm0); ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); if (!ctx) return -ENOMEM; @@ -1332,7 +1319,7 @@ static int ezusb_hard_reset(struct orinoco_private *priv) return retval; } - dbg("sending control message"); + netdev_dbg(upriv->dev, "sending control message\n"); retval = usb_control_msg(upriv->udev, usb_sndctrlpipe(upriv->udev, 0), EZUSB_REQUEST_TRIGER, @@ -1401,10 +1388,8 @@ static void ezusb_bulk_in_callback(struct urb *urb) u16 crc; u16 hermes_rid; - if (upriv->udev == NULL) { - dbg("disconnected"); + if (upriv->udev == NULL) return; - } if (urb->status == -ETIMEDOUT) { /* When a device gets unplugged we get this every time @@ -1421,12 +1406,13 @@ static void ezusb_bulk_in_callback(struct urb *urb) if ((urb->status == -EILSEQ) || (urb->status == -ENOENT) || (urb->status == -ECONNRESET)) { - dbg("status %d, not resubmiting", urb->status); + netdev_dbg(upriv->dev, "status %d, not resubmiting\n", + urb->status); return; } if (urb->status) - dbg("status: %d length: %d", - urb->status, urb->actual_length); + netdev_dbg(upriv->dev, "status: %d length: %d\n", + urb->status, urb->actual_length); if (urb->actual_length < sizeof(*ans)) { err("%s: short read, ignoring", __func__); goto resubmit; From 4a95b1fce97756d0333f8232eb7ed6974e93b054 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 29 May 2014 18:55:06 +1000 Subject: [PATCH 314/314] usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y Signed-off-by: Stephen Rothwell Acked-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6346fb2acbd7..db6287025c06 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3966,6 +3966,12 @@ EXPORT_SYMBOL_GPL(usb_disable_ltm); void usb_enable_ltm(struct usb_device *udev) { } EXPORT_SYMBOL_GPL(usb_enable_ltm); +static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, + u16 portstatus, u16 portchange) +{ + return 0; +} + #endif /* CONFIG_PM */