Merge tag 'tegra-for-5.1-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes

ARM: tegra: Core changes for v5.1-rc1

This contains three fixes for resume from LP1 on Tegra30.

* tag 'tegra-for-5.1-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+
  ARM: tegra: Fix DRAM refresh-interval clobbering on resume from LP1 on Tegra30
  ARM: tegra: Fix missed EMC registers latching on resume from LP1 on Tegra30+

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2019-02-15 17:47:17 +01:00
Родитель d0e1f79ad3 1c6279b49d
Коммит e61c92005e
3 изменённых файлов: 32 добавлений и 4 удалений

Просмотреть файл

@ -79,15 +79,24 @@
#define TEGRA_PMC_BASE 0x7000E400
#define TEGRA_PMC_SIZE SZ_256
#define TEGRA_MC_BASE 0x7000F000
#define TEGRA_MC_SIZE SZ_1K
#define TEGRA_EMC_BASE 0x7000F400
#define TEGRA_EMC_SIZE SZ_1K
#define TEGRA114_MC_BASE 0x70019000
#define TEGRA114_MC_SIZE SZ_4K
#define TEGRA_EMC0_BASE 0x7001A000
#define TEGRA_EMC0_SIZE SZ_2K
#define TEGRA_EMC1_BASE 0x7001A800
#define TEGRA_EMC1_SIZE SZ_2K
#define TEGRA124_MC_BASE 0x70019000
#define TEGRA124_MC_SIZE SZ_4K
#define TEGRA124_EMC_BASE 0x7001B000
#define TEGRA124_EMC_SIZE SZ_2K

Просмотреть файл

@ -32,7 +32,6 @@
#define EMC_CFG 0xc
#define EMC_ADR_CFG 0x10
#define EMC_REFRESH 0x70
#define EMC_NOP 0xdc
#define EMC_SELF_REF 0xe0
#define EMC_REQ_CTRL 0x2b0
@ -397,7 +396,6 @@ padload_done:
mov r1, #1
str r1, [r0, #EMC_NOP]
str r1, [r0, #EMC_NOP]
str r1, [r0, #EMC_REFRESH]
emc_device_mask r1, r0

Просмотреть файл

@ -29,7 +29,6 @@
#define EMC_CFG 0xc
#define EMC_ADR_CFG 0x10
#define EMC_TIMING_CONTROL 0x28
#define EMC_REFRESH 0x70
#define EMC_NOP 0xdc
#define EMC_SELF_REF 0xe0
#define EMC_MRW 0xe8
@ -45,6 +44,8 @@
#define EMC_XM2VTTGENPADCTRL 0x310
#define EMC_XM2VTTGENPADCTRL2 0x314
#define MC_EMEM_ARB_CFG 0x90
#define PMC_CTRL 0x0
#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
@ -419,6 +420,22 @@ _pll_m_c_x_done:
movweq r0, #:lower16:TEGRA124_EMC_BASE
movteq r0, #:upper16:TEGRA124_EMC_BASE
cmp r10, #TEGRA30
moveq r2, #0x20
movweq r4, #:lower16:TEGRA_MC_BASE
movteq r4, #:upper16:TEGRA_MC_BASE
cmp r10, #TEGRA114
moveq r2, #0x34
movweq r4, #:lower16:TEGRA114_MC_BASE
movteq r4, #:upper16:TEGRA114_MC_BASE
cmp r10, #TEGRA124
moveq r2, #0x20
movweq r4, #:lower16:TEGRA124_MC_BASE
movteq r4, #:upper16:TEGRA124_MC_BASE
ldr r1, [r5, r2] @ restore MC_EMEM_ARB_CFG
str r1, [r4, #MC_EMEM_ARB_CFG]
exit_self_refresh:
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
@ -459,7 +476,6 @@ emc_wait_auto_cal_onetime:
cmp r10, #TEGRA30
streq r1, [r0, #EMC_NOP]
streq r1, [r0, #EMC_NOP]
streq r1, [r0, #EMC_REFRESH]
emc_device_mask r1, r0
@ -521,6 +537,8 @@ zcal_done:
ldr r1, [r5, #0x0] @ restore EMC_CFG
str r1, [r0, #EMC_CFG]
emc_timing_update r1, r0
/* Tegra114 had dual EMC channel, now config the other one */
cmp r10, #TEGRA114
bne __no_dual_emc_chanl
@ -546,6 +564,7 @@ tegra30_sdram_pad_address:
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
.word TEGRA_MC_BASE + MC_EMEM_ARB_CFG @0x20
tegra30_sdram_pad_address_end:
tegra114_sdram_pad_address:
@ -562,6 +581,7 @@ tegra114_sdram_pad_address:
.word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
.word TEGRA114_MC_BASE + MC_EMEM_ARB_CFG @0x34
tegra114_sdram_pad_adress_end:
tegra124_sdram_pad_address:
@ -573,6 +593,7 @@ tegra124_sdram_pad_address:
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
.word TEGRA124_MC_BASE + MC_EMEM_ARB_CFG @0x20
tegra124_sdram_pad_address_end:
tegra30_sdram_pad_size: