UBI: implement atomic LEB change ioctl

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This commit is contained in:
Artem Bityutskiy 2008-01-24 18:48:21 +02:00
Родитель 866136827b
Коммит e653879c26
3 изменённых файлов: 183 добавлений и 28 удалений

Просмотреть файл

@ -132,8 +132,15 @@ static int vol_cdev_release(struct inode *inode, struct file *file)
if (vol->updating) {
ubi_warn("update of volume %d not finished, volume is damaged",
vol->vol_id);
ubi_assert(!vol->changing_leb);
vol->updating = 0;
vfree(vol->upd_buf);
} else if (vol->changing_leb) {
dbg_msg("only %lld of %lld bytes received for atomic LEB change"
" for volume %d:%d, cancel", vol->upd_received,
vol->upd_bytes, vol->ubi->ubi_num, vol->vol_id);
vol->changing_leb = 0;
vfree(vol->upd_buf);
}
ubi_close_volume(desc);
@ -351,24 +358,32 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
struct ubi_volume *vol = desc->vol;
struct ubi_device *ubi = vol->ubi;
if (!vol->updating)
if (!vol->updating && !vol->changing_leb)
return vol_cdev_direct_write(file, buf, count, offp);
err = ubi_more_update_data(ubi, vol, buf, count);
if (vol->updating)
err = ubi_more_update_data(ubi, vol, buf, count);
else
err = ubi_more_leb_change_data(ubi, vol, buf, count);
if (err < 0) {
ubi_err("cannot write %zd bytes of update data, error %d",
ubi_err("cannot accept more %zd bytes of data, error %d",
count, err);
return err;
}
if (err) {
/*
* Update is finished, @err contains number of actually written
* bytes now.
* The operation is finished, @err contains number of actually
* written bytes.
*/
count = err;
vol->updating = 0;
if (vol->changing_leb) {
revoke_exclusive(desc, UBI_READWRITE);
return count;
}
err = ubi_check_volume(ubi, vol->vol_id);
if (err < 0)
return err;
@ -433,6 +448,43 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
break;
}
/* Atomic logical eraseblock change command */
case UBI_IOCEBCH:
{
struct ubi_leb_change_req req;
err = copy_from_user(&req, argp,
sizeof(struct ubi_leb_change_req));
if (err) {
err = -EFAULT;
break;
}
if (desc->mode == UBI_READONLY ||
vol->vol_type == UBI_STATIC_VOLUME) {
err = -EROFS;
break;
}
/* Validate the request */
err = -EINVAL;
if (req.lnum < 0 || req.lnum >= vol->reserved_pebs ||
req.bytes < 0 || req.lnum >= vol->usable_leb_size)
break;
if (req.dtype != UBI_LONGTERM && req.dtype != UBI_SHORTTERM &&
req.dtype != UBI_UNKNOWN)
break;
err = get_exclusive(desc);
if (err < 0)
break;
err = ubi_start_leb_change(ubi, vol, &req);
if (req.bytes == 0)
revoke_exclusive(desc, UBI_READWRITE);
break;
}
#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
/* Logical eraseblock erasure command */
case UBI_IOCEBER:
@ -445,7 +497,8 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
break;
}
if (desc->mode == UBI_READONLY) {
if (desc->mode == UBI_READONLY ||
vol->vol_type == UBI_STATIC_VOLUME) {
err = -EROFS;
break;
}
@ -455,11 +508,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file,
break;
}
if (vol->vol_type != UBI_DYNAMIC_VOLUME) {
err = -EROFS;
break;
}
dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
err = ubi_eba_unmap_leb(ubi, vol, lnum);
if (err)

Просмотреть файл

@ -158,15 +158,23 @@ struct ubi_volume_desc;
* @name: volume name
*
* @upd_ebs: how many eraseblocks are expected to be updated
* @upd_bytes: how many bytes are expected to be received
* @upd_received: how many update bytes were already received
* @upd_buf: update buffer which is used to collect update data
* @ch_lnum: LEB number which is being changing by the atomic LEB change
* operation
* @ch_dtype: data persistency type which is being changing by the atomic LEB
* change operation
* @upd_bytes: how many bytes are expected to be received for volume update or
* atomic LEB change
* @upd_received: how many bytes were already received for volume update or
* atomic LEB change
* @upd_buf: update buffer which is used to collect update data or data for
* atomic LEB change
*
* @eba_tbl: EBA table of this volume (LEB->PEB mapping)
* @checked: %1 if this static volume was checked
* @corrupted: %1 if the volume is corrupted (static volumes only)
* @upd_marker: %1 if the update marker is set for this volume
* @updating: %1 if the volume is being updated
* @changing_leb: %1 if the atomic LEB change ioctl command is in progress
*
* @gluebi_desc: gluebi UBI volume descriptor
* @gluebi_refcount: reference count of the gluebi MTD device
@ -202,6 +210,8 @@ struct ubi_volume {
char name[UBI_VOL_NAME_MAX+1];
int upd_ebs;
int ch_lnum;
int ch_dtype;
long long upd_bytes;
long long upd_received;
void *upd_buf;
@ -211,9 +221,14 @@ struct ubi_volume {
int corrupted:1;
int upd_marker:1;
int updating:1;
int changing_leb:1;
#ifdef CONFIG_MTD_UBI_GLUEBI
/* Gluebi-related stuff may be compiled out */
/*
* Gluebi-related stuff may be compiled out.
* TODO: this should not be built into UBI but should be a separate
* ubimtd driver which works on top of UBI and emulates MTD devices.
*/
struct ubi_volume_desc *gluebi_desc;
int gluebi_refcount;
struct mtd_info gluebi_mtd;
@ -427,6 +442,10 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
long long bytes);
int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count);
int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
const struct ubi_leb_change_req *req);
int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count);
/* misc.c */
int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length);

Просмотреть файл

@ -22,7 +22,8 @@
*/
/*
* This file contains implementation of the volume update functionality.
* This file contains implementation of the volume update and atomic LEB change
* functionality.
*
* The update operation is based on the per-volume update marker which is
* stored in the volume table. The update marker is set before the update
@ -133,6 +134,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
uint64_t tmp;
dbg_msg("start update of volume %d, %llu bytes", vol->vol_id, bytes);
ubi_assert(!vol->updating && !vol->changing_leb);
vol->updating = 1;
err = set_update_marker(ubi, vol);
@ -167,6 +169,39 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
return 0;
}
/**
* ubi_start_leb_change - start atomic LEB change.
* @ubi: UBI device description object
* @vol: volume description object
* @req: operation request
*
* This function starts atomic LEB change operation. Returns zero in case of
* success and a negative error code in case of failure.
*/
int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
const struct ubi_leb_change_req *req)
{
ubi_assert(!vol->updating && !vol->changing_leb);
dbg_msg("start changing LEB %d:%d, %u bytes",
vol->vol_id, req->lnum, req->bytes);
if (req->bytes == 0)
return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
req->dtype);
vol->upd_bytes = req->bytes;
vol->upd_received = 0;
vol->changing_leb = 1;
vol->ch_lnum = req->lnum;
vol->ch_dtype = req->dtype;
vol->upd_buf = vmalloc(req->bytes);
if (!vol->upd_buf)
return -ENOMEM;
return 0;
}
/**
* write_leb - write update data.
* @ubi: UBI device description object
@ -199,21 +234,19 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
void *buf, int len, int used_ebs)
{
int err, l;
int err;
if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
l = ALIGN(len, ubi->min_io_size);
memset(buf + len, 0xFF, l - len);
len = ALIGN(len, ubi->min_io_size);
memset(buf + len, 0xFF, len - len);
l = ubi_calc_data_len(ubi, buf, l);
if (l == 0) {
len = ubi_calc_data_len(ubi, buf, len);
if (len == 0) {
dbg_msg("all %d bytes contain 0xFF - skip", len);
return 0;
}
if (len != l)
dbg_msg("skip last %d bytes (0xFF)", len - l);
err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, l, UBI_UNKNOWN);
err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len, UBI_UNKNOWN);
} else {
/*
* When writing static volume, and this is the last logical
@ -239,9 +272,9 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
* @count: how much bytes to write
*
* This function writes more data to the volume which is being updated. It may
* be called arbitrary number of times until all of the update data arrive.
* This function returns %0 in case of success, number of bytes written during
* the last call if the whole volume update was successfully finished, and a
* be called arbitrary number of times until all the update data arriveis. This
* function returns %0 in case of success, number of bytes written during the
* last call if the whole volume update has been successfully finished, and a
* negative error code in case of failure.
*/
int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
@ -340,6 +373,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
return err;
err = ubi_wl_flush(ubi);
if (err == 0) {
vol->updating = 0;
err = to_write;
vfree(vol->upd_buf);
}
@ -347,3 +381,57 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
return err;
}
/**
* ubi_more_leb_change_data - accept more data for atomic LEB change.
* @vol: volume description object
* @buf: write data (user-space memory buffer)
* @count: how much bytes to write
*
* This function accepts more data to the volume which is being under the
* "atomic LEB change" operation. It may be called arbitrary number of times
* until all data arrives. This function returns %0 in case of success, number
* of bytes written during the last call if the whole "atomic LEB change"
* operation has been successfully finished, and a negative error code in case
* of failure.
*/
int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
const void __user *buf, int count)
{
int err;
dbg_msg("write %d of %lld bytes, %lld already passed",
count, vol->upd_bytes, vol->upd_received);
if (ubi->ro_mode)
return -EROFS;
if (vol->upd_received + count > vol->upd_bytes)
count = vol->upd_bytes - vol->upd_received;
err = copy_from_user(vol->upd_buf + vol->upd_received, buf, count);
if (err)
return -EFAULT;
vol->upd_received += count;
if (vol->upd_received == vol->upd_bytes) {
int len = ALIGN((int)vol->upd_bytes, ubi->min_io_size);
memset(vol->upd_buf + vol->upd_bytes, 0xFF, len - vol->upd_bytes);
len = ubi_calc_data_len(ubi, vol->upd_buf, len);
err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
vol->upd_buf, len, UBI_UNKNOWN);
if (err)
return err;
}
ubi_assert(vol->upd_received <= vol->upd_bytes);
if (vol->upd_received == vol->upd_bytes) {
vol->changing_leb = 0;
err = count;
vfree(vol->upd_buf);
}
return err;
}