ASoC: doc: ReSTize DAI.txt
A simple conversion from a plain text file with slight reformatting / corrections. The file name was changed to lower letters to align with others. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Родитель
693ba474a3
Коммит
e732d1bcd4
|
@ -1,3 +1,7 @@
|
|||
==================================
|
||||
ASoC Digital Audio Interface (DAI)
|
||||
==================================
|
||||
|
||||
ASoC currently supports the three main Digital Audio Interfaces (DAI) found on
|
||||
SoC controllers and portable audio CODECs today, namely AC97, I2S and PCM.
|
||||
|
||||
|
@ -5,21 +9,21 @@ SoC controllers and portable audio CODECs today, namely AC97, I2S and PCM.
|
|||
AC97
|
||||
====
|
||||
|
||||
AC97 is a five wire interface commonly found on many PC sound cards. It is
|
||||
AC97 is a five wire interface commonly found on many PC sound cards. It is
|
||||
now also popular in many portable devices. This DAI has a reset line and time
|
||||
multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines.
|
||||
The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the
|
||||
frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
|
||||
frame is 21uS long and is divided into 13 time slots.
|
||||
|
||||
The AC97 specification can be found at :-
|
||||
The AC97 specification can be found at :
|
||||
http://www.intel.com/p/en_US/business/design
|
||||
|
||||
|
||||
I2S
|
||||
===
|
||||
|
||||
I2S is a common 4 wire DAI used in HiFi, STB and portable devices. The Tx and
|
||||
I2S is a common 4 wire DAI used in HiFi, STB and portable devices. The Tx and
|
||||
Rx lines are used for audio transmission, whilst the bit clock (BCLK) and
|
||||
left/right clock (LRC) synchronise the link. I2S is flexible in that either the
|
||||
controller or CODEC can drive (master) the BCLK and LRC clock lines. Bit clock
|
||||
|
@ -30,13 +34,15 @@ different sample rates.
|
|||
|
||||
I2S has several different operating modes:-
|
||||
|
||||
o I2S - MSB is transmitted on the falling edge of the first BCLK after LRC
|
||||
transition.
|
||||
I2S
|
||||
MSB is transmitted on the falling edge of the first BCLK after LRC
|
||||
transition.
|
||||
|
||||
o Left Justified - MSB is transmitted on transition of LRC.
|
||||
Left Justified
|
||||
MSB is transmitted on transition of LRC.
|
||||
|
||||
o Right Justified - MSB is transmitted sample size BCLKs before LRC
|
||||
transition.
|
||||
Right Justified
|
||||
MSB is transmitted sample size BCLKs before LRC transition.
|
||||
|
||||
PCM
|
||||
===
|
||||
|
@ -51,6 +57,8 @@ is sometimes referred to as network mode).
|
|||
|
||||
Common PCM operating modes:-
|
||||
|
||||
o Mode A - MSB is transmitted on falling edge of first BCLK after FRAME/SYNC.
|
||||
Mode A
|
||||
MSB is transmitted on falling edge of first BCLK after FRAME/SYNC.
|
||||
|
||||
o Mode B - MSB is transmitted on rising edge of FRAME/SYNC.
|
||||
Mode B
|
||||
MSB is transmitted on rising edge of FRAME/SYNC.
|
|
@ -9,3 +9,4 @@ The documentation is spilt into the following sections:-
|
|||
|
||||
overview
|
||||
codec
|
||||
dai
|
||||
|
|
Загрузка…
Ссылка в новой задаче