ASoC: rsnd: Fix possible NULL pointer dereference

25165f79ad
("ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz")
supports both 44.1kHz/48kHz clock-frequency settings for ADG
which will be used for AUDIO_OLKOUTn.
But some board doesn't need it, thus, it is not mandatory.

But, above patch didn't care about the case of "clock-frequency" DT
property was not present.
This patch ignores ADG settings if AUDIO_OLKOUTn was not used.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
[Kuninori: tidyup not to break non AUDIO_OLKOUTn case]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Marek Vasut 2017-04-21 00:41:20 +00:00 коммит произвёл Mark Brown
Родитель 75f9e4adb5
Коммит e8dffe6c20
1 изменённых файлов: 11 добавлений и 7 удалений

Просмотреть файл

@ -453,13 +453,18 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
[CLKI] = 0x2,
};
of_property_read_u32(np, "#clock-cells", &count);
ckr = 0;
rbga = 2; /* default 1/6 */
rbgb = 2; /* default 1/6 */
/*
* ADG supports BRRA/BRRB output only
* this means all clkout0/1/2/3 will be same rate
*/
prop = of_find_property(np, "clock-frequency", NULL);
if (!prop)
goto rsnd_adg_get_clkout_end;
req_size = prop->length / sizeof(u32);
of_property_read_u32_array(np, "clock-frequency", req_rate, req_size);
@ -472,6 +477,9 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
req_48kHz_rate = req_rate[i];
}
if (req_rate[0] % 48000 == 0)
adg->flags = AUDIO_OUT_48;
/*
* This driver is assuming that AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC
* have 44.1kHz or 48kHz base clocks for now.
@ -481,9 +489,6 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
* rsnd_adg_ssi_clk_try_start()
* rsnd_ssi_master_clk_start()
*/
ckr = 0;
rbga = 2; /* default 1/6 */
rbgb = 2; /* default 1/6 */
adg->rbga_rate_for_441khz = 0;
adg->rbgb_rate_for_48khz = 0;
for_each_rsnd_clk(clk, adg, i) {
@ -528,6 +533,7 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
* this means all clkout0/1/2/3 will be * same rate
*/
of_property_read_u32(np, "#clock-cells", &count);
/*
* for clkout
*/
@ -557,13 +563,11 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
&adg->onecell);
}
rsnd_adg_get_clkout_end:
adg->ckr = ckr;
adg->rbga = rbga;
adg->rbgb = rbgb;
if (req_rate[0] % 48000 == 0)
adg->flags = AUDIO_OUT_48;
for_each_rsnd_clkout(clk, adg, i)
dev_dbg(dev, "clkout %d : %p : %ld\n", i, clk, clk_get_rate(clk));
dev_dbg(dev, "BRGCKR = 0x%08x, BRRA/BRRB = 0x%x/0x%x\n",