ARM: S5P6440: Move CPU specific code in plat-s5p to machine directory

The s5p6440-clock.c and s5p6440-init.c code in the plat-s5p is specific to
s5p6440 SoC based systems. So these files are being moved to the machine
directory of s5p6440. And these files are renamed in the machine directory.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s5p6440/Kconfig

@@ -9,8 +9,6 @@ if ARCH_S5P6440
 
 config CPU_S5P6440
 	bool
-	select CPU_S5P6440_INIT
-	select CPU_S5P6440_CLOCK
 	help
 	  Enable S5P6440 CPU support
 

arch/arm/mach-s5p6440/Makefile

@@ -12,7 +12,7 @@ obj-				:=
 
 # Core support for S5P6440 system
 
-obj-$(CONFIG_CPU_S5P6440)	+= cpu.o s5p6440-gpio.o
+obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o
 
 # machine support
 

arch/arm/mach-s5p6440/clock.c

@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/s5p6440-clock.c
+/* linux/arch/arm/mach-s5p6440/clock.c
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/

arch/arm/mach-s5p6440/gpio.c

@@ -1,4 +1,4 @@
-/* arch/arm/mach-s5p6440/s5p6440-gpio.c
+/* arch/arm/mach-s5p6440/gpio.c
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  * 		http://www.samsung.com/

arch/arm/mach-s5p6440/init.c

@@ -1,8 +1,10 @@
-/* linux/arch/arm/plat-s5p/s5p6440-init.c
+/* linux/arch/arm/mach-s5p6440/init.c
  *
  * Copyright (c) 2009 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
+ * S5P6440 - Init support
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.

arch/arm/plat-s5p/Kconfig

@@ -24,19 +24,3 @@ config PLAT_S5P
 	select SAMSUNG_IRQ_UART
 	help
 	  Base platform code for Samsung's S5P series SoC.
-
-if (PLAT_S5P && ARCH_S5P6440)
-
-# Configuration options shared by all S5P64XX implementations
-
-config CPU_S5P6440_INIT
-	bool
-	help
-	 Initialisation code for the S5P6440.
-
-config CPU_S5P6440_CLOCK
-	bool
-	help
-	  Clock support code for the S5P6440.
-
-endif

arch/arm/plat-s5p/Makefile

@@ -17,8 +17,3 @@ obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
 obj-y				+= setup-i2c0.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5P6440_INIT)	+= s5p6440-init.o
-obj-$(CONFIG_CPU_S5P6440_CLOCK)	+= s5p6440-clock.o