ARM: OMAP2+: Remove legacy mux code
All the boards booting with device tree use drivers/pinctrl-single.c instead. Note that mach-omap1 is still using the legacy mux, so let's move the related Kconfig options from plat-omap to mach-omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren
Родитель
b42814557f
Коммит
e9f5f1e456
|
|
@ -31,6 +31,32 @@ config ARCH_OMAP16XX
|
|||
select ARCH_OMAP_OTG
|
||||
select CPU_ARM926T
|
||||
|
||||
config OMAP_MUX
|
||||
bool "OMAP multiplexing support"
|
||||
depends on ARCH_OMAP
|
||||
default y
|
||||
help
|
||||
Pin multiplexing support for OMAP boards. If your bootloader
|
||||
sets the multiplexing correctly, say N. Otherwise, or if unsure,
|
||||
say Y.
|
||||
|
||||
config OMAP_MUX_DEBUG
|
||||
bool "Multiplexing debug output"
|
||||
depends on OMAP_MUX
|
||||
help
|
||||
Makes the multiplexing functions print out a lot of debug info.
|
||||
This is useful if you want to find out the correct values of the
|
||||
multiplexing registers.
|
||||
|
||||
config OMAP_MUX_WARNINGS
|
||||
bool "Warn about pins the bootloader didn't set up"
|
||||
depends on OMAP_MUX
|
||||
default y
|
||||
help
|
||||
Choose Y here to warn whenever driver initialization logic needs
|
||||
to change the pin multiplexing setup. When there are no warnings
|
||||
printed, it's safe to deselect OMAP_MUX for your product.
|
||||
|
||||
comment "OMAP Board Type"
|
||||
depends on ARCH_OMAP1
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
|
|||
-I$(srctree)/arch/arm/plat-omap/include
|
||||
|
||||
# Common support
|
||||
obj-y := id.o io.o control.o mux.o devices.o fb.o timer.o pm.o \
|
||||
obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
|
||||
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
|
||||
omap_device.o omap-headsmp.o sram.o drm.o
|
||||
|
||||
|
|
@ -63,9 +63,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap4-restart.o
|
|||
obj-$(CONFIG_SOC_OMAP5) += omap4-restart.o
|
||||
obj-$(CONFIG_SOC_DRA7XX) += omap4-restart.o
|
||||
|
||||
# Pin multiplexing
|
||||
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
||||
|
||||
# SMS/SDRC
|
||||
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
||||
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
||||
|
|
|
|||
|
|
@ -77,15 +77,6 @@ static inline int omap4_pm_init_early(void)
|
|||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
int omap_mux_late_init(void);
|
||||
#else
|
||||
static inline int omap_mux_late_init(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
extern void omap2_init_common_infrastructure(void);
|
||||
|
||||
extern void omap_init_time(void);
|
||||
|
|
|
|||
|
|
@ -32,6 +32,5 @@
|
|||
|
||||
#include "soc.h"
|
||||
#include "dss-common.h"
|
||||
#include "mux.h"
|
||||
#include "display.h"
|
||||
|
||||
|
|
|
|||
|
|
@ -22,7 +22,6 @@
|
|||
#include "omap_device.h"
|
||||
#include "omap-pm.h"
|
||||
|
||||
#include "mux.h"
|
||||
#include "hsmmc.h"
|
||||
#include "control.h"
|
||||
|
||||
|
|
@ -147,91 +146,6 @@ static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
|
||||
*mmc_controller, int controller_nr)
|
||||
{
|
||||
if (gpio_is_valid(mmc_controller->gpio_cd) &&
|
||||
(mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES))
|
||||
omap_mux_init_gpio(mmc_controller->gpio_cd,
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
if (gpio_is_valid(mmc_controller->gpio_cod) &&
|
||||
(mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES))
|
||||
omap_mux_init_gpio(mmc_controller->gpio_cod,
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
if (gpio_is_valid(mmc_controller->gpio_wp) &&
|
||||
(mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
|
||||
omap_mux_init_gpio(mmc_controller->gpio_wp,
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
if (cpu_is_omap34xx()) {
|
||||
if (controller_nr == 0) {
|
||||
omap_mux_init_signal("sdmmc1_clk",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_cmd",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_dat0",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
if (mmc_controller->caps &
|
||||
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
|
||||
omap_mux_init_signal("sdmmc1_dat1",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_dat2",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_dat3",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
}
|
||||
if (mmc_controller->caps &
|
||||
MMC_CAP_8_BIT_DATA) {
|
||||
omap_mux_init_signal("sdmmc1_dat4",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_dat5",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_dat6",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc1_dat7",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
}
|
||||
}
|
||||
if (controller_nr == 1) {
|
||||
/* MMC2 */
|
||||
omap_mux_init_signal("sdmmc2_clk",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_cmd",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_dat0",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
|
||||
/*
|
||||
* For 8 wire configurations, Lines DAT4, 5, 6 and 7
|
||||
* need to be muxed in the board-*.c files
|
||||
*/
|
||||
if (mmc_controller->caps &
|
||||
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
|
||||
omap_mux_init_signal("sdmmc2_dat1",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_dat2",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_dat3",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
}
|
||||
if (mmc_controller->caps &
|
||||
MMC_CAP_8_BIT_DATA) {
|
||||
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
|
||||
OMAP_PIN_INPUT_PULLUP);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* For MMC3 the pins need to be muxed in the board-*.c files
|
||||
*/
|
||||
}
|
||||
}
|
||||
|
||||
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
|
||||
struct omap_hsmmc_platform_data *mmc)
|
||||
{
|
||||
|
|
@ -410,8 +324,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
|
|||
if (res < 0)
|
||||
goto free_mmc;
|
||||
|
||||
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
|
||||
|
||||
name = "omap_hsmmc";
|
||||
res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
|
||||
"mmc%d", ctrl_nr);
|
||||
|
|
|
|||
|
|
@ -427,7 +427,6 @@ static void __init omap_hwmod_init_postsetup(void)
|
|||
|
||||
static void __init __maybe_unused omap_common_late_init(void)
|
||||
{
|
||||
omap_mux_late_init();
|
||||
omap2_common_pm_late_init();
|
||||
omap_soc_device_init();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -30,7 +30,6 @@
|
|||
#include "control.h"
|
||||
#include "omap_hwmod.h"
|
||||
#include "omap_device.h"
|
||||
#include "mux.h"
|
||||
#include "mmc.h"
|
||||
|
||||
/*
|
||||
|
|
|
|||
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
|
@ -1,352 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2009 Nokia
|
||||
* Copyright (C) 2009-2010 Texas Instruments
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "mux34xx.h"
|
||||
|
||||
#define OMAP_MUX_TERMINATOR 0xffff
|
||||
|
||||
/* 34xx mux mode options for each pin. See TRM for options */
|
||||
#define OMAP_MUX_MODE0 0
|
||||
#define OMAP_MUX_MODE1 1
|
||||
#define OMAP_MUX_MODE2 2
|
||||
#define OMAP_MUX_MODE3 3
|
||||
#define OMAP_MUX_MODE4 4
|
||||
#define OMAP_MUX_MODE5 5
|
||||
#define OMAP_MUX_MODE6 6
|
||||
#define OMAP_MUX_MODE7 7
|
||||
|
||||
/* 24xx/34xx mux bit defines */
|
||||
#define OMAP_PULL_ENA (1 << 3)
|
||||
#define OMAP_PULL_UP (1 << 4)
|
||||
#define OMAP_ALTELECTRICALSEL (1 << 5)
|
||||
|
||||
/* omap3/4/5 specific mux bit defines */
|
||||
#define OMAP_INPUT_EN (1 << 8)
|
||||
#define OMAP_OFF_EN (1 << 9)
|
||||
#define OMAP_OFFOUT_EN (1 << 10)
|
||||
#define OMAP_OFFOUT_VAL (1 << 11)
|
||||
#define OMAP_OFF_PULL_EN (1 << 12)
|
||||
#define OMAP_OFF_PULL_UP (1 << 13)
|
||||
#define OMAP_WAKEUP_EN (1 << 14)
|
||||
#define OMAP_WAKEUP_EVENT (1 << 15)
|
||||
|
||||
/* Active pin states */
|
||||
#define OMAP_PIN_OUTPUT 0
|
||||
#define OMAP_PIN_INPUT OMAP_INPUT_EN
|
||||
#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \
|
||||
| OMAP_PULL_UP)
|
||||
#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN)
|
||||
|
||||
/* Off mode states */
|
||||
#define OMAP_PIN_OFF_NONE 0
|
||||
#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \
|
||||
| OMAP_OFFOUT_VAL)
|
||||
#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN)
|
||||
#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
|
||||
| OMAP_OFF_PULL_UP)
|
||||
#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
|
||||
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
|
||||
|
||||
#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \
|
||||
partition->gpio)
|
||||
#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
|
||||
|
||||
/* Flags for omapX_mux_init */
|
||||
#define OMAP_PACKAGE_MASK 0xffff
|
||||
#define OMAP_PACKAGE_CBP 6 /* 515-pin 0.40 0.50 */
|
||||
#define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */
|
||||
#define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */
|
||||
#define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */
|
||||
|
||||
#define OMAP_MUX_NR_MODES 8 /* Available modes */
|
||||
#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */
|
||||
|
||||
/*
|
||||
* omap_mux_init flags definition:
|
||||
*
|
||||
* OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
|
||||
* register which includes values from 0-7.
|
||||
* OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
|
||||
* The default value is 16 bits.
|
||||
*/
|
||||
#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0
|
||||
#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1
|
||||
#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2
|
||||
#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3
|
||||
#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4
|
||||
#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5
|
||||
#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6
|
||||
#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7
|
||||
#define OMAP_MUX_REG_8BIT (1 << 3)
|
||||
|
||||
/**
|
||||
* struct omap_board_data - board specific device data
|
||||
* @id: instance id
|
||||
* @flags: additional flags for platform init code
|
||||
* @pads: array of device specific pads
|
||||
* @pads_cnt: ARRAY_SIZE() of pads
|
||||
*/
|
||||
struct omap_board_data {
|
||||
int id;
|
||||
u32 flags;
|
||||
struct omap_device_pad *pads;
|
||||
int pads_cnt;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct mux_partition - contain partition related information
|
||||
* @name: name of the current partition
|
||||
* @flags: flags specific to this partition
|
||||
* @gpio: gpio mux mode
|
||||
* @phys: physical address
|
||||
* @size: partition size
|
||||
* @base: virtual address after ioremap
|
||||
* @muxmodes: list of nodes that belong to a partition
|
||||
* @node: list node for the partitions linked list
|
||||
*/
|
||||
struct omap_mux_partition {
|
||||
const char *name;
|
||||
u32 flags;
|
||||
u32 gpio;
|
||||
u32 phys;
|
||||
u32 size;
|
||||
void __iomem *base;
|
||||
struct list_head muxmodes;
|
||||
struct list_head node;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct omap_mux - data for omap mux register offset and it's value
|
||||
* @reg_offset: mux register offset from the mux base
|
||||
* @gpio: GPIO number
|
||||
* @muxnames: available signal modes for a ball
|
||||
* @balls: available balls on the package
|
||||
*/
|
||||
struct omap_mux {
|
||||
u16 reg_offset;
|
||||
u16 gpio;
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
char *muxnames[OMAP_MUX_NR_MODES];
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
char *balls[OMAP_MUX_NR_SIDES];
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
/**
|
||||
* struct omap_ball - data for balls on omap package
|
||||
* @reg_offset: mux register offset from the mux base
|
||||
* @balls: available balls on the package
|
||||
*/
|
||||
struct omap_ball {
|
||||
u16 reg_offset;
|
||||
char *balls[OMAP_MUX_NR_SIDES];
|
||||
};
|
||||
|
||||
/**
|
||||
* struct omap_board_mux - data for initializing mux registers
|
||||
* @reg_offset: mux register offset from the mux base
|
||||
* @mux_value: desired mux value to set
|
||||
*/
|
||||
struct omap_board_mux {
|
||||
u16 reg_offset;
|
||||
u16 value;
|
||||
};
|
||||
|
||||
#define OMAP_DEVICE_PAD_REMUX BIT(1) /* Dynamically remux a pad,
|
||||
needs enable, idle and off
|
||||
values */
|
||||
#define OMAP_DEVICE_PAD_WAKEUP BIT(0) /* Pad is wake-up capable */
|
||||
|
||||
/**
|
||||
* struct omap_device_pad - device specific pad configuration
|
||||
* @name: signal name
|
||||
* @flags: pad specific runtime flags
|
||||
* @enable: runtime value for a pad
|
||||
* @idle: idle value for a pad
|
||||
* @off: off value for a pad, defaults to safe mode
|
||||
* @partition: mux partition
|
||||
* @mux: mux register
|
||||
*/
|
||||
struct omap_device_pad {
|
||||
char *name;
|
||||
u8 flags;
|
||||
u16 enable;
|
||||
u16 idle;
|
||||
u16 off;
|
||||
struct omap_mux_partition *partition;
|
||||
struct omap_mux *mux;
|
||||
};
|
||||
|
||||
struct omap_hwmod_mux_info;
|
||||
|
||||
#define OMAP_MUX_STATIC(signal, mode) \
|
||||
{ \
|
||||
.name = (signal), \
|
||||
.enable = (mode), \
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OMAP_MUX)
|
||||
|
||||
/**
|
||||
* omap_mux_init_gpio - initialize a signal based on the GPIO number
|
||||
* @gpio: GPIO number
|
||||
* @val: Options for the mux register value
|
||||
*/
|
||||
int omap_mux_init_gpio(int gpio, int val);
|
||||
|
||||
/**
|
||||
* omap_mux_init_signal - initialize a signal based on the signal name
|
||||
* @muxname: Mux name in mode0_name.signal_name format
|
||||
* @val: Options for the mux register value
|
||||
*/
|
||||
int omap_mux_init_signal(const char *muxname, int val);
|
||||
|
||||
/**
|
||||
* omap_hwmod_mux_init - initialize hwmod specific mux data
|
||||
* @bpads: Board specific device signal names
|
||||
* @nr_pads: Number of signal names for the device
|
||||
*/
|
||||
extern struct omap_hwmod_mux_info *
|
||||
omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
|
||||
|
||||
/**
|
||||
* omap_hwmod_mux - omap hwmod specific pin muxing
|
||||
* @hmux: Pads for a hwmod
|
||||
* @state: Desired _HWMOD_STATE
|
||||
*
|
||||
* Called only from omap_hwmod.c, do not use.
|
||||
*/
|
||||
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
|
||||
|
||||
int omap_mux_get_by_name(const char *muxname,
|
||||
struct omap_mux_partition **found_partition,
|
||||
struct omap_mux **found_mux);
|
||||
#else
|
||||
|
||||
static inline int omap_mux_get_by_name(const char *muxname,
|
||||
struct omap_mux_partition **found_partition,
|
||||
struct omap_mux **found_mux)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int omap_mux_init_gpio(int gpio, int val)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline int omap_mux_init_signal(char *muxname, int val)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline struct omap_hwmod_mux_info *
|
||||
omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
|
||||
{
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
|
||||
{
|
||||
}
|
||||
|
||||
static struct omap_board_mux *board_mux __maybe_unused;
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* omap_mux_get_gpio() - get mux register value based on GPIO number
|
||||
* @gpio: GPIO number
|
||||
*
|
||||
*/
|
||||
u16 omap_mux_get_gpio(int gpio);
|
||||
|
||||
/**
|
||||
* omap_mux_set_gpio() - set mux register value based on GPIO number
|
||||
* @val: New mux register value
|
||||
* @gpio: GPIO number
|
||||
*
|
||||
*/
|
||||
void omap_mux_set_gpio(u16 val, int gpio);
|
||||
|
||||
/**
|
||||
* omap_mux_get() - get a mux partition by name
|
||||
* @name: Name of the mux partition
|
||||
*
|
||||
*/
|
||||
struct omap_mux_partition *omap_mux_get(const char *name);
|
||||
|
||||
/**
|
||||
* omap_mux_read() - read mux register
|
||||
* @partition: Mux partition
|
||||
* @mux_offset: Offset of the mux register
|
||||
*
|
||||
*/
|
||||
u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset);
|
||||
|
||||
/**
|
||||
* omap_mux_write() - write mux register
|
||||
* @partition: Mux partition
|
||||
* @val: New mux register value
|
||||
* @mux_offset: Offset of the mux register
|
||||
*
|
||||
* This should be only needed for dynamic remuxing of non-gpio signals.
|
||||
*/
|
||||
void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset);
|
||||
|
||||
/**
|
||||
* omap_mux_write_array() - write an array of mux registers
|
||||
* @partition: Mux partition
|
||||
* @board_mux: Array of mux registers terminated by MAP_MUX_TERMINATOR
|
||||
*
|
||||
* This should be only needed for dynamic remuxing of non-gpio signals.
|
||||
*/
|
||||
void omap_mux_write_array(struct omap_mux_partition *p,
|
||||
struct omap_board_mux *board_mux);
|
||||
|
||||
/**
|
||||
* omap2420_mux_init() - initialize mux system with board specific set
|
||||
* @board_mux: Board specific mux table
|
||||
* @flags: OMAP package type used for the board
|
||||
*/
|
||||
int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
|
||||
|
||||
/**
|
||||
* omap2430_mux_init() - initialize mux system with board specific set
|
||||
* @board_mux: Board specific mux table
|
||||
* @flags: OMAP package type used for the board
|
||||
*/
|
||||
int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
|
||||
|
||||
/**
|
||||
* omap3_mux_init() - initialize mux system with board specific set
|
||||
* @board_mux: Board specific mux table
|
||||
* @flags: OMAP package type used for the board
|
||||
*/
|
||||
int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
|
||||
|
||||
/**
|
||||
* omap4_mux_init() - initialize mux system with board specific set
|
||||
* @board_subset: Board specific mux table
|
||||
* @board_wkup_subset: Board specific mux table for wakeup instance
|
||||
* @flags: OMAP package type used for the board
|
||||
*/
|
||||
int omap4_mux_init(struct omap_board_mux *board_subset,
|
||||
struct omap_board_mux *board_wkup_subset, int flags);
|
||||
|
||||
/**
|
||||
* omap_mux_init - private mux init function, do not call
|
||||
*/
|
||||
int omap_mux_init(const char *name, u32 flags,
|
||||
u32 mux_pbase, u32 mux_size,
|
||||
struct omap_mux *superset,
|
||||
struct omap_mux *package_subset,
|
||||
struct omap_board_mux *board_mux,
|
||||
struct omap_ball *package_balls);
|
||||
|
||||
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
|
@ -1,402 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2009 Nokia
|
||||
* Copyright (C) 2009 Texas Instruments
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU
|
||||
|
||||
#define OMAP3_MUX(mode0, mux_value) \
|
||||
{ \
|
||||
.reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \
|
||||
.value = (mux_value), \
|
||||
}
|
||||
|
||||
/*
|
||||
* OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
|
||||
*
|
||||
* Extracted from the TRM. Add 0x48002030 to these values to get the
|
||||
* absolute addresses. The name in the macro is the mode-0 name of
|
||||
* the pin. NOTE: These registers are 16-bits wide.
|
||||
*
|
||||
* Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
|
||||
* of CHASSIS for some registers. For the defines, we follow the
|
||||
* 36XX naming, and use SDMMC and CHASSIS.
|
||||
*/
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8
|
||||
#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100
|
||||
#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102
|
||||
#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104
|
||||
#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106
|
||||
#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108
|
||||
#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e
|
||||
|
||||
/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126
|
||||
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138
|
||||
#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142
|
||||
#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144
|
||||
#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146
|
||||
#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148
|
||||
#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a
|
||||
#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c
|
||||
#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e
|
||||
#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150
|
||||
#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166
|
||||
#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168
|
||||
#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a
|
||||
#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c
|
||||
#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e
|
||||
#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186
|
||||
#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188
|
||||
#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a
|
||||
#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c
|
||||
#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e
|
||||
#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190
|
||||
#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192
|
||||
#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194
|
||||
#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac
|
||||
#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc
|
||||
|
||||
/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222
|
||||
#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224
|
||||
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234
|
||||
|
||||
/* 36xx only */
|
||||
#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2
|
||||
#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4
|
||||
|
||||
/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
|
||||
#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120
|
||||
#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122
|
||||
#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124
|
||||
#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126
|
||||
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8
|
||||
#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca
|
||||
#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0
|
||||
#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8
|
||||
#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6
|
||||
#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e
|
||||
#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20
|
||||
#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24
|
||||
#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26
|
||||
#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28
|
||||
#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a
|
||||
|
||||
#define OMAP3_CONTROL_PADCONF_MUX_SIZE \
|
||||
(OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2)
|
||||
|
|
@ -63,32 +63,6 @@ config OMAP_RESET_CLOCKS
|
|||
probably do not want this option enabled until your
|
||||
device drivers work properly.
|
||||
|
||||
config OMAP_MUX
|
||||
bool "OMAP multiplexing support"
|
||||
depends on ARCH_OMAP
|
||||
default y
|
||||
help
|
||||
Pin multiplexing support for OMAP boards. If your bootloader
|
||||
sets the multiplexing correctly, say N. Otherwise, or if unsure,
|
||||
say Y.
|
||||
|
||||
config OMAP_MUX_DEBUG
|
||||
bool "Multiplexing debug output"
|
||||
depends on OMAP_MUX
|
||||
help
|
||||
Makes the multiplexing functions print out a lot of debug info.
|
||||
This is useful if you want to find out the correct values of the
|
||||
multiplexing registers.
|
||||
|
||||
config OMAP_MUX_WARNINGS
|
||||
bool "Warn about pins the bootloader didn't set up"
|
||||
depends on OMAP_MUX
|
||||
default y
|
||||
help
|
||||
Choose Y here to warn whenever driver initialization logic needs
|
||||
to change the pin multiplexing setup. When there are no warnings
|
||||
printed, it's safe to deselect OMAP_MUX for your product.
|
||||
|
||||
config OMAP_MPU_TIMER
|
||||
bool "Use mpu timer"
|
||||
depends on ARCH_OMAP1
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче