From ebf5e87791a97a7b71d5bd52e0382321a56bb12b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 14 Feb 2014 10:45:37 +0100 Subject: [PATCH] hwmon: Sort Kconfig entries alphabetically Entries have been added at more or less random positions over time, so it becomes difficult to find what you are looking for or figure out where to insert new entries. Signed-off-by: Jean Delvare Signed-off-by: Guenter Roeck --- drivers/hwmon/Kconfig | 628 +++++++++++++++++++++--------------------- 1 file changed, 314 insertions(+), 314 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7ed3aa62425c..8087ed5f5cc5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -111,22 +111,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADCXX - tristate "National Semiconductor ADCxxxSxxx" - depends on SPI_MASTER - help - If you say yes here you get support for the National Semiconductor - ADCS chip family, where - * bb is the resolution in number of bits (8, 10, 12) - * c is the number of channels (1, 2, 4, 8) - * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 - kSPS and 101 for 1 MSPS) - - Examples : ADC081S101, ADC124S501, ... - - This driver can also be built as a module. If so, the module - will be called adcxx. - config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C @@ -312,6 +296,31 @@ config SENSORS_FAM15H_POWER This driver can also be built as a module. If so, the module will be called fam15h_power. +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + select INPUT_POLLDEV + default n + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C @@ -435,6 +444,12 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. +config SENSORS_MC13783_ADC + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. + config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C @@ -451,26 +466,6 @@ config SENSORS_FSCHMD This driver can also be built as a module. If so, the module will be called fschmd. -config SENSORS_G760A - tristate "GMT G760A" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G760A fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g760a. - -config SENSORS_G762 - tristate "GMT G762 and G763" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G762 and G763 fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g762. - config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -492,6 +487,26 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g760a. + +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + config SENSORS_GPIO_FAN tristate "GPIO fan" depends on GPIOLIB @@ -511,24 +526,6 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. -config SENSORS_HTU21 - tristate "Measurement Specialties HTU21D humidity/temperature sensors" - depends on I2C - help - If you say yes here you get support for the Measurement Specialties - HTU21D humidity and temperature sensors. - - This driver can also be built as a module. If so, the module - will be called htu21. - -config SENSORS_CORETEMP - tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 - help - If you say yes here you get support for the temperature - sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. - config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -566,6 +563,14 @@ config SENSORS_IIO_HWMON for those channels specified in the map. This map can be provided either via platform data or the device tree bindings. +config SENSORS_CORETEMP + tristate "Intel Core/Core2/Atom temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check Documentation/hwmon/coretemp for details. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on !PPC @@ -614,6 +619,219 @@ config SENSORS_LINEAGE This driver can also be built as a module. If so, the module will be called lineage-pem. +config SENSORS_LTC2945 + tristate "Linear Technology LTC2945" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC2945 + I2C System Monitor. + + This driver can also be built as a module. If so, the module will + be called ltc2945. + +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4222 + tristate "Linear Technology LTC4222" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4222 + Dual Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4222. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LTC4260 + tristate "Linear Technology LTC4260" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4260 + Positive Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4260. + +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 + ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + +config SENSORS_MAX16065 + tristate "Maxim MAX16065 System Manager and compatibles" + depends on I2C + help + If you say yes here you get support for hardware monitoring + capabilities of the following Maxim System Manager chips. + MAX16065 + MAX16066 + MAX16067 + MAX16068 + MAX16070 + MAX16071 + + This driver can also be built as a module. If so, the module + will be called max16065. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_MAX1668 + tristate "Maxim MAX1668 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX1668, MAX1989 and + MAX1805 chips. + + This driver can also be built as a module. If so, the module + will be called max1668. + +config SENSORS_MAX197 + tristate "Maxim MAX197 and compatibles" + help + Support for the Maxim MAX197 A/D converter. + Support will include, but not be limited to, MAX197, and MAX199. + + This driver can also be built as a module. If so, the module + will be called max197. + +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + +config SENSORS_MAX6697 + tristate "Maxim MAX6697 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX6581, MAX6602, MAX6622, + MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6697. + +config SENSORS_HTU21 + tristate "Measurement Specialties HTU21D humidity/temperature sensors" + depends on I2C + help + If you say yes here you get support for the Measurement Specialties + HTU21D humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu21. + +config SENSORS_MCP3021 + tristate "Microchip MCP3021 and compatibles" + depends on I2C + help + If you say yes here you get support for MCP3021 and MCP3221. + The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 + with 12-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER + help + If you say yes here you get support for the National Semiconductor + ADCS chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_LM63 tristate "National Semiconductor LM63 and compatibles" depends on I2C @@ -776,86 +994,6 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. -config SENSORS_LTC2945 - tristate "Linear Technology LTC2945" - depends on I2C - select REGMAP_I2C - default n - help - If you say yes here you get support for Linear Technology LTC2945 - I2C System Monitor. - - This driver can also be built as a module. If so, the module will - be called ltc2945. - -config SENSORS_LTC4151 - tristate "Linear Technology LTC4151" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4151 - High Voltage I2C Current and Voltage Monitor interface. - - This driver can also be built as a module. If so, the module will - be called ltc4151. - -config SENSORS_LTC4215 - tristate "Linear Technology LTC4215" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4215 - Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4215. - -config SENSORS_LTC4222 - tristate "Linear Technology LTC4222" - depends on I2C - select REGMAP_I2C - default n - help - If you say yes here you get support for Linear Technology LTC4222 - Dual Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4222. - -config SENSORS_LTC4245 - tristate "Linear Technology LTC4245" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4245 - Multiple Supply Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4245. - -config SENSORS_LTC4260 - tristate "Linear Technology LTC4260" - depends on I2C - select REGMAP_I2C - default n - help - If you say yes here you get support for Linear Technology LTC4260 - Positive Voltage Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4260. - -config SENSORS_LTC4261 - tristate "Linear Technology LTC4261" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4261 - Negative Voltage Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4261. - config SENSORS_LM95234 tristate "National Semiconductor LM95234" depends on I2C @@ -885,140 +1023,6 @@ config SENSORS_LM95245 This driver can also be built as a module. If so, the module will be called lm95245. -config SENSORS_MAX1111 - tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" - depends on SPI_MASTER - help - Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 - ADC chips. - - This driver can also be built as a module. If so, the module - will be called max1111. - -config SENSORS_MAX16065 - tristate "Maxim MAX16065 System Manager and compatibles" - depends on I2C - help - If you say yes here you get support for hardware monitoring - capabilities of the following Maxim System Manager chips. - MAX16065 - MAX16066 - MAX16067 - MAX16068 - MAX16070 - MAX16071 - - This driver can also be built as a module. If so, the module - will be called max16065. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_MAX1668 - tristate "Maxim MAX1668 and compatibles" - depends on I2C - help - If you say yes here you get support for MAX1668, MAX1989 and - MAX1805 chips. - - This driver can also be built as a module. If so, the module - will be called max1668. - -config SENSORS_MAX197 - tristate "Maxim MAX197 and compatibles" - help - Support for the Maxim MAX197 A/D converter. - Support will include, but not be limited to, MAX197, and MAX199. - - This driver can also be built as a module. If so, the module - will be called max197. - -config SENSORS_MAX6639 - tristate "Maxim MAX6639 sensor chip" - depends on I2C - help - If you say yes here you get support for the MAX6639 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6639. - -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - -config SENSORS_MAX6650 - tristate "Maxim MAX6650 sensor chip" - depends on I2C - help - If you say yes here you get support for the MAX6650 / MAX6651 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6650. - -config SENSORS_MAX6697 - tristate "Maxim MAX6697 and compatibles" - depends on I2C - help - If you say yes here you get support for MAX6581, MAX6602, MAX6622, - MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 - temperature sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6697. - -config SENSORS_MCP3021 - tristate "Microchip MCP3021 and compatibles" - depends on I2C - help - If you say yes here you get support for MCP3021 and MCP3221. - The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 - with 12-bit resolution. - - This driver can also be built as a module. If so, the module - will be called mcp3021. - -config SENSORS_NCT6775 - tristate "Nuvoton NCT6775F and compatibles" - depends on !PPC - select HWMON_VID - help - If you say yes here you get support for the hardware monitoring - functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D - and compatible Super-I/O chips. This driver replaces the - w83627ehf driver for NCT6775F and NCT6776F. - - This driver can also be built as a module. If so, the module - will be called nct6775. - -config SENSORS_NTC_THERMISTOR - tristate "NTC thermistor support" - depends on (!OF && !IIO) || (OF && IIO) - help - This driver supports NTC thermistors sensor reading and its - interpretation. The driver can also monitor the temperature and - send notifications about the temperature. - - Currently, this driver supports - NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. - - This driver can also be built as a module. If so, the module - will be called ntc-thermistor. - config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" depends on !PPC @@ -1047,6 +1051,33 @@ config SENSORS_PC87427 This driver can also be built as a module. If so, the module will be called pc87427. +config SENSORS_NTC_THERMISTOR + tristate "NTC thermistor support" + depends on (!OF && !IIO) || (OF && IIO) + help + This driver supports NTC thermistors sensor reading and its + interpretation. The driver can also monitor the temperature and + send notifications about the temperature. + + Currently, this driver supports + NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. + + This driver can also be built as a module. If so, the module + will be called ntc-thermistor. + +config SENSORS_NCT6775 + tristate "Nuvoton NCT6775F and compatibles" + depends on !PPC + select HWMON_VID + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D + and compatible Super-I/O chips. This driver replaces the + w83627ehf driver for NCT6775F and NCT6776F. + + This driver can also be built as a module. If so, the module + will be called nct6775. + config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" depends on I2C @@ -1110,21 +1141,6 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" - depends on I2C - default n - help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. - - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. - - This driver can also be built as a module. If so, the module will - be called smm665. - config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && !PPC @@ -1246,6 +1262,21 @@ config SENSORS_SCH5636 This driver can also be built as a module. If so, the module will be called sch5636. +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + config SENSORS_ADS1015 tristate "Texas Instruments ADS1015" depends on I2C @@ -1561,37 +1592,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_APPLESMC - tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" - depends on INPUT && X86 - select NEW_LEDS - select LEDS_CLASS - select INPUT_POLLDEV - default n - help - This driver provides support for the Apple System Management - Controller, which provides an accelerometer (Apple Sudden Motion - Sensor), light sensors, temperature sensors, keyboard backlight - control and fan control. - - Only Intel-based Apple's computers are supported (MacBook Pro, - MacBook, MacMini). - - Data from the different sensors, keyboard backlight control and fan - control are accessible via sysfs. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of applesmc. - -config SENSORS_MC13783_ADC - tristate "Freescale MC13783/MC13892 ADC" - depends on MFD_MC13XXX - help - Support for the A/D converter on MC13783 and MC13892 PMIC. - if ACPI comment "ACPI drivers"