ARM: dts: Add STM32F746 MCU and STM32746g-EVAL board
The STMicrolectornics's STM32F746 MCU has the following main features: - Cortex-M7 core running up to @216MHz - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM) - FMC controller to connect SDRAM, NOR and NAND memories - Dual mode QSPI - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller - HDMI-CEC - SPDIFRX Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This commit is contained in:
Alexandre TORGUE
Родитель
f6dbbff4f0
Коммит
ec2f9b10f3
|
|
@ -721,7 +721,8 @@ dtb-$(CONFIG_ARCH_STI) += \
|
|||
dtb-$(CONFIG_ARCH_STM32)+= \
|
||||
stm32f429-disco.dtb \
|
||||
stm32f469-disco.dtb \
|
||||
stm32429i-eval.dtb
|
||||
stm32429i-eval.dtb \
|
||||
stm32746g-eval.dtb
|
||||
dtb-$(CONFIG_MACH_SUN4I) += \
|
||||
sun4i-a10-a1000.dtb \
|
||||
sun4i-a10-ba10-tvbox.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,96 @@
|
|||
/*
|
||||
* Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "stm32f746.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32746g-EVAL board";
|
||||
compatible = "st,stm32746g-eval", "st,stm32f746";
|
||||
|
||||
chosen {
|
||||
bootargs = "root=/dev/ram";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0xc0000000 0x2000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &usart1;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
green {
|
||||
gpios = <&gpiof 10 1>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
red {
|
||||
gpios = <&gpiob 7 1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
button@0 {
|
||||
label = "Wake up";
|
||||
linux,code = <KEY_WAKEUP>;
|
||||
gpios = <&gpioc 13 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&clk_hse {
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
pinctrl-0 = <&usart1_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,304 @@
|
|||
/*
|
||||
* Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
#include "armv7-m.dtsi"
|
||||
#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
|
||||
|
||||
/ {
|
||||
clocks {
|
||||
clk_hse: clk-hse {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
timer2: timer@40000000 {
|
||||
compatible = "st,stm32-timer";
|
||||
reg = <0x40000000 0x400>;
|
||||
interrupts = <28>;
|
||||
clocks = <&rcc 0 128>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer3: timer@40000400 {
|
||||
compatible = "st,stm32-timer";
|
||||
reg = <0x40000400 0x400>;
|
||||
interrupts = <29>;
|
||||
clocks = <&rcc 0 129>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer4: timer@40000800 {
|
||||
compatible = "st,stm32-timer";
|
||||
reg = <0x40000800 0x400>;
|
||||
interrupts = <30>;
|
||||
clocks = <&rcc 0 130>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer5: timer@40000c00 {
|
||||
compatible = "st,stm32-timer";
|
||||
reg = <0x40000c00 0x400>;
|
||||
interrupts = <50>;
|
||||
clocks = <&rcc 0 131>;
|
||||
};
|
||||
|
||||
timer6: timer@40001000 {
|
||||
compatible = "st,stm32-timer";
|
||||
reg = <0x40001000 0x400>;
|
||||
interrupts = <54>;
|
||||
clocks = <&rcc 0 132>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer7: timer@40001400 {
|
||||
compatible = "st,stm32-timer";
|
||||
reg = <0x40001400 0x400>;
|
||||
interrupts = <55>;
|
||||
clocks = <&rcc 0 133>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart2: serial@40004400 {
|
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
|
||||
reg = <0x40004400 0x400>;
|
||||
interrupts = <38>;
|
||||
clocks = <&rcc 0 145>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart3: serial@40004800 {
|
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
|
||||
reg = <0x40004800 0x400>;
|
||||
interrupts = <39>;
|
||||
clocks = <&rcc 0 146>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart4: serial@40004c00 {
|
||||
compatible = "st,stm32f7-uart";
|
||||
reg = <0x40004c00 0x400>;
|
||||
interrupts = <52>;
|
||||
clocks = <&rcc 0 147>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart5: serial@40005000 {
|
||||
compatible = "st,stm32f7-uart";
|
||||
reg = <0x40005000 0x400>;
|
||||
interrupts = <53>;
|
||||
clocks = <&rcc 0 148>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart7: serial@40007800 {
|
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
|
||||
reg = <0x40007800 0x400>;
|
||||
interrupts = <82>;
|
||||
clocks = <&rcc 0 158>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart8: serial@40007c00 {
|
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
|
||||
reg = <0x40007c00 0x400>;
|
||||
interrupts = <83>;
|
||||
clocks = <&rcc 0 159>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart1: serial@40011000 {
|
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
|
||||
reg = <0x40011000 0x400>;
|
||||
interrupts = <37>;
|
||||
clocks = <&rcc 0 164>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart6: serial@40011400 {
|
||||
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
|
||||
reg = <0x40011400 0x400>;
|
||||
interrupts = <71>;
|
||||
clocks = <&rcc 0 165>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
syscfg: system-config@40013800 {
|
||||
compatible = "syscon";
|
||||
reg = <0x40013800 0x400>;
|
||||
};
|
||||
|
||||
exti: interrupt-controller@40013c00 {
|
||||
compatible = "st,stm32-exti";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x40013C00 0x400>;
|
||||
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
|
||||
};
|
||||
|
||||
pin-controller {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stm32f746-pinctrl";
|
||||
ranges = <0 0x40020000 0x3000>;
|
||||
interrupt-parent = <&exti>;
|
||||
st,syscfg = <&syscfg 0x8>;
|
||||
pins-are-numbered;
|
||||
|
||||
gpioa: gpio@40020000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x0 0x400>;
|
||||
clocks = <&rcc 0 256>;
|
||||
st,bank-name = "GPIOA";
|
||||
};
|
||||
|
||||
gpiob: gpio@40020400 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x400 0x400>;
|
||||
clocks = <&rcc 0 257>;
|
||||
st,bank-name = "GPIOB";
|
||||
};
|
||||
|
||||
gpioc: gpio@40020800 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x800 0x400>;
|
||||
clocks = <&rcc 0 258>;
|
||||
st,bank-name = "GPIOC";
|
||||
};
|
||||
|
||||
gpiod: gpio@40020c00 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0xc00 0x400>;
|
||||
clocks = <&rcc 0 259>;
|
||||
st,bank-name = "GPIOD";
|
||||
};
|
||||
|
||||
gpioe: gpio@40021000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x1000 0x400>;
|
||||
clocks = <&rcc 0 260>;
|
||||
st,bank-name = "GPIOE";
|
||||
};
|
||||
|
||||
gpiof: gpio@40021400 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x1400 0x400>;
|
||||
clocks = <&rcc 0 261>;
|
||||
st,bank-name = "GPIOF";
|
||||
};
|
||||
|
||||
gpiog: gpio@40021800 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x1800 0x400>;
|
||||
clocks = <&rcc 0 262>;
|
||||
st,bank-name = "GPIOG";
|
||||
};
|
||||
|
||||
gpioh: gpio@40021c00 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x1c00 0x400>;
|
||||
clocks = <&rcc 0 263>;
|
||||
st,bank-name = "GPIOH";
|
||||
};
|
||||
|
||||
gpioi: gpio@40022000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x2000 0x400>;
|
||||
clocks = <&rcc 0 264>;
|
||||
st,bank-name = "GPIOI";
|
||||
};
|
||||
|
||||
gpioj: gpio@40022400 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x2400 0x400>;
|
||||
clocks = <&rcc 0 265>;
|
||||
st,bank-name = "GPIOJ";
|
||||
};
|
||||
|
||||
gpiok: gpio@40022800 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x2800 0x400>;
|
||||
clocks = <&rcc 0 266>;
|
||||
st,bank-name = "GPIOK";
|
||||
};
|
||||
|
||||
usart1_pins_a: usart1@0 {
|
||||
pins1 {
|
||||
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rcc: rcc@40023800 {
|
||||
#clock-cells = <2>;
|
||||
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
|
||||
reg = <0x40023800 0x400>;
|
||||
clocks = <&clk_hse>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&systick {
|
||||
clocks = <&rcc 1 0>;
|
||||
status = "okay";
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче