USB patches for 3.14-rc1

Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people.) USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEABECAAYFAlLdjwIACgkQMUfUDdst+ylBIQCgkRoR8lJc0L5lZ3fugIJL4IzZ j6AAn0nBLP6VI0cvUEi3TcrPTzv4MEuL =Yb+I -----END PGP SIGNATURE----- Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include <linux/init.h> usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...
2014-01-20 16:13:02 -08:00 · 2014-01-20 16:13:02 -08:00 · ec513b16c4
--- a/Documentation/ABI/testing/configfs-usb-gadget-ffs
+++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs
@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/ffs.name
+Date:		Nov 2013
+KenelVersion:	3.13
+Description:	The purpose of this directory is to create and remove it.
+
+		A corresponding USB function instance is created/removed.
+		There are no attributes here.
+
+		All parameters are set through FunctionFS.
--- a/Documentation/ABI/testing/configfs-usb-gadget-loopback
+++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback
@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/Loopback.name
+Date:		Nov 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		qlen		- depth of loopback queue
+		bulk_buflen	- buffer length
--- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
+++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@ -0,0 +1,12 @@
+What:		/config/usb-gadget/gadget/functions/SourceSink.name
+Date:		Nov 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		pattern		- 0 (all zeros), 1 (mod63), 2 (none)
+		isoc_interval	- 1..16
+		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
+		isoc_mult	- 0..2 (hs/ss only)
+		isoc_maxburst	- 0..15 (ss only)
+		qlen		- buffer length
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@ -50,13 +50,19 @@ Description:
 		This may allow the driver to support more hardware than
 		was included in the driver's static device ID support
 		table at compile time. The format for the device ID is:
-		idVendor idProduct bInterfaceClass.
+		idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
 		The vendor ID and device ID fields are required, the
-		interface class is optional.
+		rest is optional. The Ref* tuple can be used to tell the
+		driver to use the same driver_data for the new device as
+		it is used for the reference device.
 		Upon successfully adding an ID, the driver will probe
 		for the device and attempt to bind to it.  For example:
 		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id

+		Here add a new device (0458:7045) using driver_data from
+		an already supported device (0458:704c):
+		# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
+
 		Reading from this file will list all dynamically added
 		device IDs in the same format, with one entry per
 		line. For example:
--- a/Documentation/ABI/testing/sysfs-platform-tahvo-usb
+++ b/Documentation/ABI/testing/sysfs-platform-tahvo-usb
@ -0,0 +1,16 @@
+What:		/sys/bus/platform/devices/tahvo-usb/otg_mode
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Set or read the current OTG mode. Valid values are "host" and
+		"peripheral".
+
+		Reading: returns the current mode.
+
+What:		/sys/bus/platform/devices/tahvo-usb/vbus
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Read the current VBUS state.
+
+		Reading: returns "on" or "off".
--- a/Documentation/devicetree/bindings/phy/bcm-phy.txt
+++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt
@ -0,0 +1,15 @@
+BROADCOM KONA USB2 PHY
+
+Required properties:
+ - compatible: brcm,kona-usb2-phy
+ - reg: offset and length of the PHY registers
+ - #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+	};
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@ -7,6 +7,14 @@ Required properties:
  - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
+- clocks: clock provider specifier
+- clock-names: shall be "otg"
+Refer to clk/clock-bindings.txt for generic clock consumer properties
+
+Optional properties:
+- phys: phy provider specifier
+- phy-names: shall be "device"
+Refer to phy/phy-bindings.txt for generic phy consumer properties

 Example:

@ -14,4 +22,8 @@ Example:
                compatible = "ralink,rt3050-usb, snps,dwc2";
                reg = <0x101c0000 40000>;
                interrupts = <18>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
        };
--- a/Documentation/devicetree/bindings/usb/gr-udc.txt
+++ b/Documentation/devicetree/bindings/usb/gr-udc.txt
@ -0,0 +1,28 @@
+USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
+
+The GRUSBDC USB Device Controller core is available in the GRLIB VHDL
+IP core library.
+
+Note: In the ordinary environment for the core, a Leon SPARC system,
+these properties are built from information in the AMBA plug&play.
+
+Required properties:
+
+- name : Should be "GAISLER_USBDC" or "01_021"
+
+- reg : Address and length of the register set for the device
+
+- interrupts : Interrupt numbers for this device
+
+Optional properties:
+
+- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is
+	not present, or for endpoints outside of the array, 1024 is assumed by
+	the driver.
+
+- epibufsizes : An array of buffer sizes for IN endpoints. If the property is
+	not present, or for endpoints outside of the array, 1024 is assumed by
+	the driver.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@ -87,6 +87,8 @@ Required properties:
 			e.g. USB3 PHY and SATA PHY on OMAP5.
 "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
 			DRA7 platform.
+ "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
+			AM437 platform.
 - reg : Address and length of the register set for the device. It contains
   the address of "otghs_control" for control-phy-otghs or "power" register
   for other types.
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@ -8,43 +8,7 @@
 #define	is_usb0_device(config)	0
 #endif

-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-
-	struct platform_device *udc_device;
-	struct platform_device *ohci_device;
-	struct platform_device *otg_device;
-
-	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
-	u32 (*usb1_init)(unsigned nwires);
-	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
-	int (*ocpi_enable)(void);
-};
+#include <linux/platform_data/usb-omap1.h>

 void omap_otg_init(struct omap_usb_config *config);

--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@ -57,4 +57,10 @@ config PHY_EXYNOS_DP_VIDEO
 	help
 	  Support for Display Port PHY found on Samsung EXYNOS SoCs.

+config BCM_KONA_USB2_PHY
+	tristate "Broadcom Kona USB2 PHY Driver"
+	depends on GENERIC_PHY
+	help
+	  Enable this to support the Broadcom Kona USB 2.0 PHY.
+
 endmenu
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@ -3,6 +3,7 @@
 #

 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
--- a/drivers/phy/phy-bcm-kona-usb2.c
+++ b/drivers/phy/phy-bcm-kona-usb2.c
@ -0,0 +1,158 @@
+/*
+ * phy-bcm-kona-usb2.c - Broadcom Kona USB2 Phy Driver
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Matt Porter <mporter@linaro.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define OTGCTL			(0)
+#define OTGCTL_OTGSTAT2		BIT(31)
+#define OTGCTL_OTGSTAT1		BIT(30)
+#define OTGCTL_PRST_N_SW	BIT(11)
+#define OTGCTL_HRESET_N		BIT(10)
+#define OTGCTL_UTMI_LINE_STATE1	BIT(9)
+#define OTGCTL_UTMI_LINE_STATE0	BIT(8)
+
+#define P1CTL			(8)
+#define P1CTL_SOFT_RESET	BIT(1)
+#define P1CTL_NON_DRIVING	BIT(0)
+
+struct bcm_kona_usb {
+	void __iomem *regs;
+};
+
+static void bcm_kona_usb_phy_power(struct bcm_kona_usb *phy, int on)
+{
+	u32 val;
+
+	val = readl(phy->regs + OTGCTL);
+	if (on) {
+		/* Configure and power PHY */
+		val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
+			 OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
+		val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
+	} else {
+		val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
+	}
+	writel(val, phy->regs + OTGCTL);
+}
+
+static int bcm_kona_usb_phy_init(struct phy *gphy)
+{
+	struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+	u32 val;
+
+	/* Soft reset PHY */
+	val = readl(phy->regs + P1CTL);
+	val &= ~P1CTL_NON_DRIVING;
+	val |= P1CTL_SOFT_RESET;
+	writel(val, phy->regs + P1CTL);
+	writel(val & ~P1CTL_SOFT_RESET, phy->regs + P1CTL);
+	/* Reset needs to be asserted for 2ms */
+	mdelay(2);
+	writel(val | P1CTL_SOFT_RESET, phy->regs + P1CTL);
+
+	return 0;
+}
+
+static int bcm_kona_usb_phy_power_on(struct phy *gphy)
+{
+	struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+
+	bcm_kona_usb_phy_power(phy, 1);
+
+	return 0;
+}
+
+static int bcm_kona_usb_phy_power_off(struct phy *gphy)
+{
+	struct bcm_kona_usb *phy = phy_get_drvdata(gphy);
+
+	bcm_kona_usb_phy_power(phy, 0);
+
+	return 0;
+}
+
+static struct phy_ops ops = {
+	.init		= bcm_kona_usb_phy_init,
+	.power_on	= bcm_kona_usb_phy_power_on,
+	.power_off	= bcm_kona_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int bcm_kona_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm_kona_usb *phy;
+	struct resource *res;
+	struct phy *gphy;
+	struct phy_provider *phy_provider;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(phy->regs))
+		return PTR_ERR(phy->regs);
+
+	platform_set_drvdata(pdev, phy);
+
+	gphy = devm_phy_create(dev, &ops, NULL);
+	if (IS_ERR(gphy))
+		return PTR_ERR(gphy);
+
+	/* The Kona PHY supports an 8-bit wide UTMI interface */
+	phy_set_bus_width(gphy, 8);
+
+	phy_set_drvdata(gphy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+			of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_usb2_dt_ids[] = {
+	{ .compatible = "brcm,kona-usb2-phy" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, bcm_kona_usb2_dt_ids);
+
+static struct platform_driver bcm_kona_usb2_driver = {
+	.probe		= bcm_kona_usb2_probe,
+	.driver		= {
+		.name	= "bcm-kona-usb2",
+		.owner	= THIS_MODULE,
+		.of_match_table = bcm_kona_usb2_dt_ids,
+	},
+};
+
+module_platform_driver(bcm_kona_usb2_driver);
+
+MODULE_ALIAS("platform:bcm-kona-usb2");
+MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
+MODULE_DESCRIPTION("BCM Kona USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@ -3498,6 +3498,7 @@ static int octeon_usb_driver_probe(struct device *dev)
 		kfree(hcd);
 		return -1;
 	}
+	device_wakeup_enable(hcd->self.controller);

 	dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);

--- a/drivers/staging/ozwpan/ozhcd.c
+++ b/drivers/staging/ozwpan/ozhcd.c
@ -2270,6 +2270,8 @@ static int oz_plat_probe(struct platform_device *dev)
 		usb_put_hcd(hcd);
 		return -1;
 	}
+	device_wakeup_enable(hcd->self.controller);
+
 	spin_lock_bh(&g_hcdlock);
 	g_ozhcd = ozhcd;
 	spin_unlock_bh(&g_hcdlock);
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@ -94,8 +94,6 @@ source "drivers/usb/wusbcore/Kconfig"

 source "drivers/usb/host/Kconfig"

-source "drivers/usb/musb/Kconfig"
-
 source "drivers/usb/renesas_usbhs/Kconfig"

 source "drivers/usb/class/Kconfig"
@ -106,6 +104,8 @@ source "drivers/usb/image/Kconfig"

 endif

+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/dwc3/Kconfig"

 source "drivers/usb/dwc2/Kconfig"
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@ -35,7 +35,6 @@
 #include <linux/timer.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@ -27,7 +27,6 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/firmware.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@ -57,7 +57,6 @@

 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/usb.h>
 #include <linux/firmware.h>
--- a/drivers/usb/c67x00/Makefile
+++ b/drivers/usb/c67x00/Makefile
@ -2,8 +2,6 @@
 # Makefile for Cypress C67X00 USB Controller
 #

-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00.o

 c67x00-y := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@ -384,6 +384,8 @@ int c67x00_hcd_probe(struct c67x00_sie *sie)
 		goto err2;
 	}

+	device_wakeup_enable(hcd->self.controller);
+
 	spin_lock_irqsave(&sie->lock, flags);
 	sie->private_data = c67x00;
 	sie->irq = c67x00_hcd_irq;
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@ -45,7 +45,7 @@
 /*
 * The current implementation switches between _STD (default) and _ISO (when
 * isochronous transfers are scheduled), in order to optimize the throughput
- * in normal cicrumstances, but also provide good isochronous behaviour.
+ * in normal circumstances, but also provide good isochronous behaviour.
 *
 * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
 * frames; there are 12000 bit times per frame.
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@ -22,6 +22,7 @@
 */

 #include <asm/byteorder.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/usb/c67x00.h>
@ -63,7 +64,7 @@ struct c67x00_lcp_int_data {
 *
 * The c67x00 chip also support control via SPI or HSS serial
 * interfaces. However, this driver assumes that register access can
- * be performed from IRQ context.  While this is a safe assuption with
+ * be performed from IRQ context. While this is a safe assumption with
 * the HPI interface, it is not true for the serial interfaces.
 */

@ -73,13 +74,22 @@ struct c67x00_lcp_int_data {
 #define HPI_ADDR	2
 #define HPI_STATUS	3

+/*
+ * According to CY7C67300 specification (tables 140 and 141) HPI read and
+ * write cycle duration Tcyc must be at least 6T long, where T is 1/48MHz,
+ * which is 125ns.
+ */
+#define HPI_T_CYC_NS	125
+
 static inline u16 hpi_read_reg(struct c67x00_device *dev, int reg)
 {
+	ndelay(HPI_T_CYC_NS);
 	return __raw_readw(dev->hpi.base + reg * dev->hpi.regstep);
 }

 static inline void hpi_write_reg(struct c67x00_device *dev, int reg, u16 value)
 {
+	ndelay(HPI_T_CYC_NS);
 	__raw_writew(value, dev->hpi.base + reg * dev->hpi.regstep);
 }

--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@ -144,8 +144,6 @@ struct c67x00_urb_priv {

 /* -------------------------------------------------------------------------- */

-#ifdef DEBUG
-
 /**
 * dbg_td - Dump the contents of the TD
 */
@ -166,16 +164,8 @@ static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
 	dev_dbg(dev, "retry_cnt:      0x%02x\n", td->retry_cnt);
 	dev_dbg(dev, "residue:        0x%02x\n", td->residue);
 	dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
-	dev_dbg(dev, "data:");
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
-		       td->data, td_length(td), 1);
+	dev_dbg(dev, "data: %*ph\n", td_length(td), td->data);
 }
-#else				/* DEBUG */
-
-static inline void
-dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg) { }
-
-#endif				/* DEBUG */

 /* -------------------------------------------------------------------------- */
 /* Helper functions */
@ -372,6 +362,13 @@ int c67x00_urb_enqueue(struct usb_hcd *hcd,
 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
 	int port = get_root_port(urb->dev)-1;

+	/* Allocate and initialize urb private data */
+	urbp = kzalloc(sizeof(*urbp), mem_flags);
+	if (!urbp) {
+		ret = -ENOMEM;
+		goto err_urbp;
+	}
+
 	spin_lock_irqsave(&c67x00->lock, flags);

 	/* Make sure host controller is running */
@ -384,13 +381,6 @@ int c67x00_urb_enqueue(struct usb_hcd *hcd,
 	if (ret)
 		goto err_not_linked;

-	/* Allocate and initialize urb private data */
-	urbp = kzalloc(sizeof(*urbp), mem_flags);
-	if (!urbp) {
-		ret = -ENOMEM;
-		goto err_urbp;
-	}
-
 	INIT_LIST_HEAD(&urbp->hep_node);
 	urbp->urb = urb;
 	urbp->port = port;
@ -453,11 +443,11 @@ int c67x00_urb_enqueue(struct usb_hcd *hcd,
 	return 0;

 err_epdata:
-	kfree(urbp);
-err_urbp:
 	usb_hcd_unlink_urb_from_ep(hcd, urb);
 err_not_linked:
 	spin_unlock_irqrestore(&c67x00->lock, flags);
+	kfree(urbp);
+err_urbp:

 	return ret;
 }
@ -780,7 +770,8 @@ static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
 				       urbp->cnt);
 		if (ret) {
-			printk(KERN_DEBUG "create failed: %d\n", ret);
+			dev_dbg(c67x00_hcd_dev(c67x00), "create failed: %d\n",
+				ret);
 			urb->iso_frame_desc[urbp->cnt].actual_length = 0;
 			urb->iso_frame_desc[urbp->cnt].status = ret;
 			if (urbp->cnt + 1 == urb->number_of_packets)
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@ -17,5 +17,5 @@ ifneq ($(CONFIG_PCI),)
 endif

 ifneq ($(CONFIG_OF),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_imx.o usbmisc_imx.o
+	obj-$(CONFIG_USB_CHIPIDEA)	+= usbmisc_imx.o ci_hdrc_imx.o
 endif
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@ -25,6 +25,35 @@
 #define CI_HDRC_PAGE_SIZE  4096ul /* page size for TD's */
 #define ENDPT_MAX          32

+/******************************************************************************
+ * REGISTERS
+ *****************************************************************************/
+/* register indices */
+enum ci_hw_regs {
+	CAP_CAPLENGTH,
+	CAP_HCCPARAMS,
+	CAP_DCCPARAMS,
+	CAP_TESTMODE,
+	CAP_LAST = CAP_TESTMODE,
+	OP_USBCMD,
+	OP_USBSTS,
+	OP_USBINTR,
+	OP_DEVICEADDR,
+	OP_ENDPTLISTADDR,
+	OP_PORTSC,
+	OP_DEVLC,
+	OP_OTGSC,
+	OP_USBMODE,
+	OP_ENDPTSETUPSTAT,
+	OP_ENDPTPRIME,
+	OP_ENDPTFLUSH,
+	OP_ENDPTSTAT,
+	OP_ENDPTCOMPLETE,
+	OP_ENDPTCTRL,
+	/* endptctrl1..15 follow */
+	OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2,
+};
+
 /******************************************************************************
 * STRUCTURES
 *****************************************************************************/
@ -98,7 +127,7 @@ struct hw_bank {
 	void __iomem	*cap;
 	void __iomem	*op;
 	size_t		size;
-	void __iomem	**regmap;
+	void __iomem	*regmap[OP_LAST + 1];
 };

 /**
@ -135,6 +164,7 @@ struct hw_bank {
 * @id_event: indicates there is an id event, and handled at ci_otg_work
 * @b_sess_valid_event: indicates there is a vbus event, and handled
 * at ci_otg_work
+ * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
 */
 struct ci_hdrc {
 	struct device			*dev;
@ -173,6 +203,7 @@ struct ci_hdrc {
 	struct dentry			*debugfs;
 	bool				id_event;
 	bool				b_sess_valid_event;
+	bool				imx28_write_fix;
 };

 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
@ -209,38 +240,6 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 	ci->roles[role]->stop(ci);
 }

-/******************************************************************************
- * REGISTERS
- *****************************************************************************/
-/* register size */
-#define REG_BITS   (32)
-
-/* register indices */
-enum ci_hw_regs {
-	CAP_CAPLENGTH,
-	CAP_HCCPARAMS,
-	CAP_DCCPARAMS,
-	CAP_TESTMODE,
-	CAP_LAST = CAP_TESTMODE,
-	OP_USBCMD,
-	OP_USBSTS,
-	OP_USBINTR,
-	OP_DEVICEADDR,
-	OP_ENDPTLISTADDR,
-	OP_PORTSC,
-	OP_DEVLC,
-	OP_OTGSC,
-	OP_USBMODE,
-	OP_ENDPTSETUPSTAT,
-	OP_ENDPTPRIME,
-	OP_ENDPTFLUSH,
-	OP_ENDPTSTAT,
-	OP_ENDPTCOMPLETE,
-	OP_ENDPTCTRL,
-	/* endptctrl1..15 follow */
-	OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2,
-};
-
 /**
 * hw_read: reads from a hw register
 * @reg:  register index
@ -253,6 +252,26 @@ static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
 	return ioread32(ci->hw_bank.regmap[reg]) & mask;
 }

+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+	__asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+}
+#endif
+
+static inline void __hw_write(struct ci_hdrc *ci, u32 val,
+		void __iomem *addr)
+{
+	if (ci->imx28_write_fix)
+		imx28_ci_writel(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
 /**
 * hw_write: writes to a hw register
 * @reg:  register index
@ -266,7 +285,7 @@ static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
 		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
 			| (data & mask);

-	iowrite32(data, ci->hw_bank.regmap[reg]);
+	__hw_write(ci, data, ci->hw_bank.regmap[reg]);
 }

 /**
@ -281,7 +300,7 @@ static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
 {
 	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;

-	iowrite32(val, ci->hw_bank.regmap[reg]);
+	__hw_write(ci, val, ci->hw_bank.regmap[reg]);
 	return val;
 }

--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@ -23,6 +23,26 @@
 #include "ci.h"
 #include "ci_hdrc_imx.h"

+#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0)
+
+struct ci_hdrc_imx_platform_flag {
+	unsigned int flags;
+};
+
+static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
+};
+
+static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
+	.flags = CI_HDRC_IMX_IMX28_WRITE_FIX,
+};
+
+static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
+	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
+
 struct ci_hdrc_imx_data {
 	struct usb_phy *phy;
 	struct platform_device *ci_pdev;
@ -82,6 +102,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 				  CI_HDRC_DISABLE_STREAMING,
 	};
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
+	const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;

 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
@ -115,6 +138,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)

 	pdata.phy = data->phy;

+	if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
+		pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;
+
 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
 		goto err_clk;
@ -173,12 +199,6 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 	return 0;
 }

-static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
-	{ .compatible = "fsl,imx27-usb", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
-
 static struct platform_driver ci_hdrc_imx_driver = {
 	.probe = ci_hdrc_imx_probe,
 	.remove = ci_hdrc_imx_remove,
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@ -9,6 +9,9 @@
 * http://www.gnu.org/copyleft/gpl.html
 */

+#ifndef __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
+#define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
+
 struct imx_usbmisc_data {
 	int index;

@ -18,3 +21,5 @@ struct imx_usbmisc_data {

 int imx_usbmisc_init(struct imx_usbmisc_data *);
 int imx_usbmisc_init_post(struct imx_usbmisc_data *);
+
+#endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
--- a/drivers/usb/chipidea/ci_hdrc_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@ -112,7 +112,7 @@ static void ci_hdrc_pci_remove(struct pci_dev *pdev)
 *
 * Check "pci.h" for details
 */
-static DEFINE_PCI_DEVICE_TABLE(ci_hdrc_pci_id_table) = {
+static const struct pci_device_id ci_hdrc_pci_id_table[] = {
 	{
 		PCI_DEVICE(0x153F, 0x1004),
 		.driver_data = (kernel_ulong_t)&pci_platdata,
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@ -75,61 +75,54 @@
 #include "otg.h"

 /* Controller register map */
-static uintptr_t ci_regs_nolpm[] = {
-	[CAP_CAPLENGTH]		= 0x000UL,
-	[CAP_HCCPARAMS]		= 0x008UL,
-	[CAP_DCCPARAMS]		= 0x024UL,
-	[CAP_TESTMODE]		= 0x038UL,
-	[OP_USBCMD]		= 0x000UL,
-	[OP_USBSTS]		= 0x004UL,
-	[OP_USBINTR]		= 0x008UL,
-	[OP_DEVICEADDR]		= 0x014UL,
-	[OP_ENDPTLISTADDR]	= 0x018UL,
-	[OP_PORTSC]		= 0x044UL,
-	[OP_DEVLC]		= 0x084UL,
-	[OP_OTGSC]		= 0x064UL,
-	[OP_USBMODE]		= 0x068UL,
-	[OP_ENDPTSETUPSTAT]	= 0x06CUL,
-	[OP_ENDPTPRIME]		= 0x070UL,
-	[OP_ENDPTFLUSH]		= 0x074UL,
-	[OP_ENDPTSTAT]		= 0x078UL,
-	[OP_ENDPTCOMPLETE]	= 0x07CUL,
-	[OP_ENDPTCTRL]		= 0x080UL,
+static const u8 ci_regs_nolpm[] = {
+	[CAP_CAPLENGTH]		= 0x00U,
+	[CAP_HCCPARAMS]		= 0x08U,
+	[CAP_DCCPARAMS]		= 0x24U,
+	[CAP_TESTMODE]		= 0x38U,
+	[OP_USBCMD]		= 0x00U,
+	[OP_USBSTS]		= 0x04U,
+	[OP_USBINTR]		= 0x08U,
+	[OP_DEVICEADDR]		= 0x14U,
+	[OP_ENDPTLISTADDR]	= 0x18U,
+	[OP_PORTSC]		= 0x44U,
+	[OP_DEVLC]		= 0x84U,
+	[OP_OTGSC]		= 0x64U,
+	[OP_USBMODE]		= 0x68U,
+	[OP_ENDPTSETUPSTAT]	= 0x6CU,
+	[OP_ENDPTPRIME]		= 0x70U,
+	[OP_ENDPTFLUSH]		= 0x74U,
+	[OP_ENDPTSTAT]		= 0x78U,
+	[OP_ENDPTCOMPLETE]	= 0x7CU,
+	[OP_ENDPTCTRL]		= 0x80U,
 };

-static uintptr_t ci_regs_lpm[] = {
-	[CAP_CAPLENGTH]		= 0x000UL,
-	[CAP_HCCPARAMS]		= 0x008UL,
-	[CAP_DCCPARAMS]		= 0x024UL,
-	[CAP_TESTMODE]		= 0x0FCUL,
-	[OP_USBCMD]		= 0x000UL,
-	[OP_USBSTS]		= 0x004UL,
-	[OP_USBINTR]		= 0x008UL,
-	[OP_DEVICEADDR]		= 0x014UL,
-	[OP_ENDPTLISTADDR]	= 0x018UL,
-	[OP_PORTSC]		= 0x044UL,
-	[OP_DEVLC]		= 0x084UL,
-	[OP_OTGSC]		= 0x0C4UL,
-	[OP_USBMODE]		= 0x0C8UL,
-	[OP_ENDPTSETUPSTAT]	= 0x0D8UL,
-	[OP_ENDPTPRIME]		= 0x0DCUL,
-	[OP_ENDPTFLUSH]		= 0x0E0UL,
-	[OP_ENDPTSTAT]		= 0x0E4UL,
-	[OP_ENDPTCOMPLETE]	= 0x0E8UL,
-	[OP_ENDPTCTRL]		= 0x0ECUL,
+static const u8 ci_regs_lpm[] = {
+	[CAP_CAPLENGTH]		= 0x00U,
+	[CAP_HCCPARAMS]		= 0x08U,
+	[CAP_DCCPARAMS]		= 0x24U,
+	[CAP_TESTMODE]		= 0xFCU,
+	[OP_USBCMD]		= 0x00U,
+	[OP_USBSTS]		= 0x04U,
+	[OP_USBINTR]		= 0x08U,
+	[OP_DEVICEADDR]		= 0x14U,
+	[OP_ENDPTLISTADDR]	= 0x18U,
+	[OP_PORTSC]		= 0x44U,
+	[OP_DEVLC]		= 0x84U,
+	[OP_OTGSC]		= 0xC4U,
+	[OP_USBMODE]		= 0xC8U,
+	[OP_ENDPTSETUPSTAT]	= 0xD8U,
+	[OP_ENDPTPRIME]		= 0xDCU,
+	[OP_ENDPTFLUSH]		= 0xE0U,
+	[OP_ENDPTSTAT]		= 0xE4U,
+	[OP_ENDPTCOMPLETE]	= 0xE8U,
+	[OP_ENDPTCTRL]		= 0xECU,
 };

 static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 {
 	int i;

-	kfree(ci->hw_bank.regmap);
-
-	ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *),
-				     GFP_KERNEL);
-	if (!ci->hw_bank.regmap)
-		return -ENOMEM;
-
 	for (i = 0; i < OP_ENDPTCTRL; i++)
 		ci->hw_bank.regmap[i] =
 			(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
@ -208,6 +201,7 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 	reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
 		__ffs(HCCPARAMS_LEN);
 	ci->hw_bank.lpm  = reg;
+	if (reg)
 		hw_alloc_regmap(ci, !!reg);
 	ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
 	ci->hw_bank.size += OP_LAST;
@ -242,7 +236,7 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)

 static void hw_phymode_configure(struct ci_hdrc *ci)
 {
-	u32 portsc, lpm, sts;
+	u32 portsc, lpm, sts = 0;

 	switch (ci->platdata->phy_mode) {
 	case USBPHY_INTERFACE_MODE_UTMI:
@ -272,10 +266,12 @@ static void hw_phymode_configure(struct ci_hdrc *ci)

 	if (ci->hw_bank.lpm) {
 		hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
-		hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
+		if (sts)
+			hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
 	} else {
 		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
-		hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
+		if (sts)
+			hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
 	}
 }

@ -554,6 +550,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)

 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	ci->imx28_write_fix = !!(ci->platdata->flags &
+		CI_HDRC_IMX28_WRITE_FIX);

 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@ -561,6 +559,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}

+	hw_phymode_configure(ci);
+
 	ret = ci_usb_phy_init(ci);
 	if (ret) {
 		dev_err(dev, "unable to init phy: %d\n", ret);
@ -578,8 +578,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)

 	ci_get_otg_capable(ci);

-	hw_phymode_configure(ci);
-
 	dr_mode = ci->platdata->dr_mode;
 	/* initialize role(s) before the interrupt is requested */
 	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
@ -680,7 +678,6 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
 	ci_usb_phy_destroy(ci);
-	kfree(ci->hw_bank.regmap);

 	return 0;
 }
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@ -65,6 +65,7 @@ static int host_start(struct ci_hdrc *ci)
 	ehci->caps = ci->hw_bank.cap;
 	ehci->has_hostpc = ci->hw_bank.lpm;
 	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
+	ehci->imx28_write_fix = ci->imx28_write_fix;

 	if (ci->platdata->reg_vbus) {
 		ret = regulator_enable(ci->platdata->reg_vbus);
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
 *
 * Author: Peter Chen
 *
@ -19,12 +19,12 @@ static inline void ci_clear_otg_interrupt(struct ci_hdrc *ci, u32 bits)

 static inline void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
 {
-	hw_write(ci, OP_OTGSC, bits, bits);
+	hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, bits);
 }

 static inline void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
 {
-	hw_write(ci, OP_OTGSC, bits, 0);
+	hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, 0);
 }

 int ci_hdrc_otg_init(struct ci_hdrc *ci);
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@ -393,6 +393,14 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 	node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
 	node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
 	node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
+		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+		if (hwreq->req.length == 0
+				|| hwreq->req.length % hwep->ep.maxpacket)
+			mul++;
+		node->ptr->token |= mul << __ffs(TD_MULTO);
+	}

 	temp = (u32) (hwreq->req.dma + hwreq->req.actual);
 	if (length) {
@ -515,10 +523,11 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 	hwep->qh.ptr->td.token &=
 		cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));

-	if (hwep->type == USB_ENDPOINT_XFER_ISOC) {
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
 		u32 mul = hwreq->req.length / hwep->ep.maxpacket;

-		if (hwreq->req.length % hwep->ep.maxpacket)
+		if (hwreq->req.length == 0
+				|| hwreq->req.length % hwep->ep.maxpacket)
 			mul++;
 		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
 	}
@ -1173,6 +1182,12 @@ static int ep_enable(struct usb_ep *ep,
 	if (hwep->num)
 		cap |= QH_ZLT;
 	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+	/*
+	 * For ISO-TX, we set mult at QH as the largest value, and use
+	 * MultO at TD as real mult value.
+	 */
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
+		cap |= 3 << __ffs(QH_MULT);

 	hwep->qh.ptr->cap = cpu_to_le32(cap);

@ -1566,7 +1581,7 @@ static int init_eps(struct ci_hdrc *ci)
 			 * eps, maxP is set by epautoconfig() called
 			 * by gadget layer
 			 */
-			hwep->ep.maxpacket = (unsigned short)~0;
+			usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);

 			INIT_LIST_HEAD(&hwep->qh.queue);
 			hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
@ -1586,7 +1601,7 @@ static int init_eps(struct ci_hdrc *ci)
 				else
 					ci->ep0in = hwep;

-				hwep->ep.maxpacket = CTRL_PAYLOAD_MAX;
+				usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
 				continue;
 			}

--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@ -21,6 +21,10 @@
 #define MX25_USB_PHY_CTRL_OFFSET	0x08
 #define MX25_BM_EXTERNAL_VBUS_DIVIDER	BIT(23)

+#define MX27_H1_PM_BIT			BIT(8)
+#define MX27_H2_PM_BIT			BIT(16)
+#define MX27_OTG_PM_BIT			BIT(24)
+
 #define MX53_USB_OTG_PHY_CTRL_0_OFFSET	0x08
 #define MX53_USB_UH2_CTRL_OFFSET	0x14
 #define MX53_USB_UH3_CTRL_OFFSET	0x18
@ -68,6 +72,36 @@ static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
 	return 0;
 }

+static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
+{
+	unsigned long flags;
+	u32 val;
+
+	switch (data->index) {
+	case 0:
+		val = MX27_OTG_PM_BIT;
+		break;
+	case 1:
+		val = MX27_H1_PM_BIT;
+		break;
+	case 2:
+		val = MX27_H2_PM_BIT;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	if (data->disable_oc)
+		val = readl(usbmisc->base) | val;
+	else
+		val = readl(usbmisc->base) & ~val;
+	writel(val, usbmisc->base);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
 static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 {
 	void __iomem *reg = NULL;
@ -128,6 +162,10 @@ static const struct usbmisc_ops imx25_usbmisc_ops = {
 	.post = usbmisc_imx25_post,
 };

+static const struct usbmisc_ops imx27_usbmisc_ops = {
+	.init = usbmisc_imx27_init,
+};
+
 static const struct usbmisc_ops imx53_usbmisc_ops = {
 	.init = usbmisc_imx53_init,
 };
@ -161,6 +199,14 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,imx25-usbmisc",
 		.data = &imx25_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,imx27-usbmisc",
+		.data = &imx27_usbmisc_ops,
+	},
+	{
+		.compatible = "fsl,imx51-usbmisc",
+		.data = &imx53_usbmisc_ops,
+	},
 	{
 		.compatible = "fsl,imx53-usbmisc",
 		.data = &imx53_usbmisc_ops,
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@ -262,6 +262,7 @@ static void acm_ctrl_irq(struct urb *urb)
 	struct usb_cdc_notification *dr = urb->transfer_buffer;
 	unsigned char *data;
 	int newctrl;
+	int difference;
 	int retval;
 	int status = urb->status;

@ -302,19 +303,30 @@ static void acm_ctrl_irq(struct urb *urb)
 			tty_port_tty_hangup(&acm->port, false);
 		}

+		difference = acm->ctrlin ^ newctrl;
+		spin_lock(&acm->read_lock);
 		acm->ctrlin = newctrl;
+		acm->oldcount = acm->iocount;
+
+		if (difference & ACM_CTRL_DSR)
+			acm->iocount.dsr++;
+		if (difference & ACM_CTRL_BRK)
+			acm->iocount.brk++;
+		if (difference & ACM_CTRL_RI)
+			acm->iocount.rng++;
+		if (difference & ACM_CTRL_DCD)
+			acm->iocount.dcd++;
+		if (difference & ACM_CTRL_FRAMING)
+			acm->iocount.frame++;
+		if (difference & ACM_CTRL_PARITY)
+			acm->iocount.parity++;
+		if (difference & ACM_CTRL_OVERRUN)
+			acm->iocount.overrun++;
+		spin_unlock(&acm->read_lock);
+
+		if (difference)
+			wake_up_all(&acm->wioctl);

-		dev_dbg(&acm->control->dev,
-			"%s - input control lines: dcd%c dsr%c break%c "
-			"ring%c framing%c parity%c overrun%c\n",
-			__func__,
-			acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',
-			acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
-			acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',
-			acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
-			acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',
-			acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
-			acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
 		break;

 	default:
@ -796,6 +808,72 @@ static int set_serial_info(struct acm *acm,
 	return retval;
 }

+static int wait_serial_change(struct acm *acm, unsigned long arg)
+{
+	int rv = 0;
+	DECLARE_WAITQUEUE(wait, current);
+	struct async_icount old, new;
+
+	if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD ))
+		return -EINVAL;
+	do {
+		spin_lock_irq(&acm->read_lock);
+		old = acm->oldcount;
+		new = acm->iocount;
+		acm->oldcount = new;
+		spin_unlock_irq(&acm->read_lock);
+
+		if ((arg & TIOCM_DSR) &&
+			old.dsr != new.dsr)
+			break;
+		if ((arg & TIOCM_CD)  &&
+			old.dcd != new.dcd)
+			break;
+		if ((arg & TIOCM_RI) &&
+			old.rng != new.rng)
+			break;
+
+		add_wait_queue(&acm->wioctl, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
+		remove_wait_queue(&acm->wioctl, &wait);
+		if (acm->disconnected) {
+			if (arg & TIOCM_CD)
+				break;
+			else
+				rv = -ENODEV;
+		} else {
+			if (signal_pending(current))
+				rv = -ERESTARTSYS;
+		}
+	} while (!rv);
+
+	
+
+	return rv;
+}
+
+static int get_serial_usage(struct acm *acm,
+			    struct serial_icounter_struct __user *count)
+{
+	struct serial_icounter_struct icount;
+	int rv = 0;
+
+	memset(&icount, 0, sizeof(icount));
+	icount.dsr = acm->iocount.dsr;
+	icount.rng = acm->iocount.rng;
+	icount.dcd = acm->iocount.dcd;
+	icount.frame = acm->iocount.frame;
+	icount.overrun = acm->iocount.overrun;
+	icount.parity = acm->iocount.parity;
+	icount.brk = acm->iocount.brk;
+
+	if (copy_to_user(count, &icount, sizeof(icount)) > 0)
+		rv = -EFAULT;
+
+	return rv;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
@ -809,6 +887,18 @@ static int acm_tty_ioctl(struct tty_struct *tty,
 	case TIOCSSERIAL:
 		rv = set_serial_info(acm, (struct serial_struct __user *) arg);
 		break;
+	case TIOCMIWAIT:
+		rv = usb_autopm_get_interface(acm->control);
+		if (rv < 0) {
+			rv = -EIO;
+			break;
+		}
+		rv = wait_serial_change(acm, arg);
+		usb_autopm_put_interface(acm->control);
+		break;
+	case TIOCGICOUNT:
+		rv = get_serial_usage(acm, (struct serial_icounter_struct __user *) arg);
+		break;
 	}

 	return rv;
@ -1167,6 +1257,7 @@ made_compressed_probe:
 	acm->readsize = readsize;
 	acm->rx_buflimit = num_rx_buf;
 	INIT_WORK(&acm->work, acm_softint);
+	init_waitqueue_head(&acm->wioctl);
 	spin_lock_init(&acm->write_lock);
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
@ -1383,6 +1474,7 @@ static void acm_disconnect(struct usb_interface *intf)
 		device_remove_file(&acm->control->dev,
 				&dev_attr_iCountryCodeRelDate);
 	}
+	wake_up_all(&acm->wioctl);
 	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
 	usb_set_intfdata(acm->control, NULL);
 	usb_set_intfdata(acm->data, NULL);
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@ -106,6 +106,9 @@ struct acm {
 	struct work_struct work;			/* work queue entry for line discipline waking up */
 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
+	struct async_icount iocount;			/* counters for control line changes */
+	struct async_icount oldcount;			/* for comparison of counter */
+	wait_queue_head_t wioctl;			/* for ioctl */
 	unsigned int writesize;				/* max packet size for the output bulk endpoint */
 	unsigned int readsize,ctrlsize;			/* buffer sizes for freeing */
 	unsigned int minor;				/* acm minor number */
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@ -432,6 +432,38 @@ outnl:
 	return rv < 0 ? rv : count;
 }

+/*
+ * clear WDM_READ flag and possibly submit the read urb if resp_count
+ * is non-zero.
+ *
+ * Called with desc->iuspin locked
+ */
+static int clear_wdm_read_flag(struct wdm_device *desc)
+{
+	int rv = 0;
+
+	clear_bit(WDM_READ, &desc->flags);
+
+	/* submit read urb only if the device is waiting for it */
+	if (!desc->resp_count || !--desc->resp_count)
+		goto out;
+
+	set_bit(WDM_RESPONDING, &desc->flags);
+	spin_unlock_irq(&desc->iuspin);
+	rv = usb_submit_urb(desc->response, GFP_KERNEL);
+	spin_lock_irq(&desc->iuspin);
+	if (rv) {
+		dev_err(&desc->intf->dev,
+			"usb_submit_urb failed with result %d\n", rv);
+
+		/* make sure the next notification trigger a submit */
+		clear_bit(WDM_RESPONDING, &desc->flags);
+		desc->resp_count = 0;
+	}
+out:
+	return rv;
+}
+
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
@ -503,8 +535,10 @@ retry:

 		if (!desc->reslength) { /* zero length read */
 			dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
-			clear_bit(WDM_READ, &desc->flags);
+			rv = clear_wdm_read_flag(desc);
 			spin_unlock_irq(&desc->iuspin);
+			if (rv < 0)
+				goto err;
 			goto retry;
 		}
 		cntr = desc->length;
@ -526,37 +560,9 @@ retry:

 	desc->length -= cntr;
 	/* in case we had outstanding data */
-	if (!desc->length) {
-		clear_bit(WDM_READ, &desc->flags);
-
-		if (--desc->resp_count) {
-			set_bit(WDM_RESPONDING, &desc->flags);
+	if (!desc->length)
+		clear_wdm_read_flag(desc);
 	spin_unlock_irq(&desc->iuspin);
-
-			rv = usb_submit_urb(desc->response, GFP_KERNEL);
-			if (rv) {
-				dev_err(&desc->intf->dev,
-					"%s: usb_submit_urb failed with result %d\n",
-					__func__, rv);
-				spin_lock_irq(&desc->iuspin);
-				clear_bit(WDM_RESPONDING, &desc->flags);
-				spin_unlock_irq(&desc->iuspin);
-
-				if (rv == -ENOMEM) {
-					rv = schedule_work(&desc->rxwork);
-					if (rv)
-						dev_err(&desc->intf->dev, "Cannot schedule work\n");
-				} else {
-					spin_lock_irq(&desc->iuspin);
-					desc->resp_count = 0;
-					spin_unlock_irq(&desc->iuspin);
-				}
-			}
-		} else
-			spin_unlock_irq(&desc->iuspin);
-	} else
-		spin_unlock_irq(&desc->iuspin);
-
 	rv = cntr;

 err:
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@ -52,7 +52,6 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/poll.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/lp.h>
 #include <linux/mutex.h>
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@ -21,7 +21,6 @@

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

-#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@ -2,8 +2,6 @@
 # Makefile for USB Core files and filesystem
 #

-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
-
 usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
 usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
 usbcore-y += devio.o notify.o generic.o quirks.o devices.o
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@ -2,7 +2,7 @@
 * DMA memory management for framework level HCD code (hc_driver)
 *
 * This implementation plugs in through generic "usb_bus" level methods,
- * and should work with all USB controllers, regardles of bus type.
+ * and should work with all USB controllers, regardless of bus type.
 */

 #include <linux/module.h>
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@ -3,7 +3,6 @@
 #include <linux/usb/hcd.h>
 #include <linux/usb/quirks.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <asm/byteorder.h>
@ -651,10 +650,6 @@ void usb_destroy_configuration(struct usb_device *dev)
 *
 * hub-only!! ... and only in reset path, or usb_new_device()
 * (used by real hubs and virtual root hubs)
- *
- * NOTE: if this is a WUSB device and is not authorized, we skip the
- *       whole thing. A non-authorized USB device has no
- *       configurations.
 */
 int usb_get_configuration(struct usb_device *dev)
 {
@ -666,8 +661,6 @@ int usb_get_configuration(struct usb_device *dev)
 	struct usb_config_descriptor *desc;

 	cfgno = 0;
-	if (dev->authorized == 0)	/* Not really an error */
-		goto out_not_authorized;
 	result = -ENOMEM;
 	if (ncfg > USB_MAXCONFIG) {
 		dev_warn(ddev, "too many configurations: %d, "
@ -751,7 +744,6 @@ int usb_get_configuration(struct usb_device *dev)

 err:
 	kfree(desc);
-out_not_authorized:
 	dev->descriptor.bNumConfigurations = cfgno;
 err2:
 	if (result == -ENOMEM)
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@ -118,7 +118,7 @@ module_param(usbfs_memory_mb, uint, 0644);
 MODULE_PARM_DESC(usbfs_memory_mb,
 		"maximum MB allowed for usbfs buffers (0 = no limit)");

-/* Hard limit, necessary to avoid aithmetic overflow */
+/* Hard limit, necessary to avoid arithmetic overflow */
 #define USBFS_XFER_MAX		(UINT_MAX / 2 - 1000000)

 static atomic_t usbfs_memory_usage;	/* Total memory currently allocated */
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@ -37,6 +37,7 @@
 * and cause the driver to probe for all devices again.
 */
 ssize_t usb_store_new_id(struct usb_dynids *dynids,
+			 const struct usb_device_id *id_table,
 			 struct device_driver *driver,
 			 const char *buf, size_t count)
 {
@ -44,11 +45,12 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
 	u32 idVendor = 0;
 	u32 idProduct = 0;
 	unsigned int bInterfaceClass = 0;
+	u32 refVendor, refProduct;
 	int fields = 0;
 	int retval = 0;

-	fields = sscanf(buf, "%x %x %x", &idVendor, &idProduct,
-					&bInterfaceClass);
+	fields = sscanf(buf, "%x %x %x %x %x", &idVendor, &idProduct,
+			&bInterfaceClass, &refVendor, &refProduct);
 	if (fields < 2)
 		return -EINVAL;

@ -60,11 +62,30 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
 	dynid->id.idVendor = idVendor;
 	dynid->id.idProduct = idProduct;
 	dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
-	if (fields == 3) {
+	if (fields > 2 && bInterfaceClass) {
+		if (bInterfaceClass > 255)
+			return -EINVAL;
+
 		dynid->id.bInterfaceClass = (u8)bInterfaceClass;
 		dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
 	}

+	if (fields > 4) {
+		const struct usb_device_id *id = id_table;
+
+		if (!id)
+			return -ENODEV;
+
+		for (; id->match_flags; id++)
+			if (id->idVendor == refVendor && id->idProduct == refProduct)
+				break;
+
+		if (id->match_flags)
+			dynid->id.driver_info = id->driver_info;
+		else
+			return -ENODEV;
+	}
+
 	spin_lock(&dynids->lock);
 	list_add_tail(&dynid->node, &dynids->list);
 	spin_unlock(&dynids->lock);
@ -106,7 +127,7 @@ static ssize_t new_id_store(struct device_driver *driver,
 {
 	struct usb_driver *usb_drv = to_usb_driver(driver);

-	return usb_store_new_id(&usb_drv->dynids, driver, buf, count);
+	return usb_store_new_id(&usb_drv->dynids, usb_drv->id_table, driver, buf, count);
 }
 static DRIVER_ATTR_RW(new_id);

@ -839,7 +860,7 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver,
 		return -ENODEV;

 	new_udriver->drvwrap.for_devices = 1;
-	new_udriver->drvwrap.driver.name = (char *) new_udriver->name;
+	new_udriver->drvwrap.driver.name = new_udriver->name;
 	new_udriver->drvwrap.driver.bus = &usb_bus_type;
 	new_udriver->drvwrap.driver.probe = usb_probe_device;
 	new_udriver->drvwrap.driver.remove = usb_unbind_device;
@ -900,7 +921,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
 		return -ENODEV;

 	new_driver->drvwrap.for_devices = 0;
-	new_driver->drvwrap.driver.name = (char *) new_driver->name;
+	new_driver->drvwrap.driver.name = new_driver->name;
 	new_driver->drvwrap.driver.bus = &usb_bus_type;
 	new_driver->drvwrap.driver.probe = usb_probe_interface;
 	new_driver->drvwrap.driver.remove = usb_unbind_interface;
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@ -282,6 +282,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)

 	if (retval != 0)
 		goto unmap_registers;
+	device_wakeup_enable(hcd->self.controller);

 	if (pci_dev_run_wake(dev))
 		pm_runtime_put_noidle(&dev->dev);
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@ -44,6 +44,7 @@

 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>

 #include "usb.h"

@ -1297,7 +1298,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
 *   DMA framework is dma_declare_coherent_memory()
 *
 * - So we use that, even though the primary requirement
- *   is that the memory be "local" (hence addressible
+ *   is that the memory be "local" (hence addressable
 *   by that device), not "coherent".
 *
 */
@ -2588,6 +2589,24 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	int retval;
 	struct usb_device *rhdev;

+	if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->phy) {
+		struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
+
+		if (IS_ERR(phy)) {
+			retval = PTR_ERR(phy);
+			if (retval == -EPROBE_DEFER)
+				return retval;
+		} else {
+			retval = usb_phy_init(phy);
+			if (retval) {
+				usb_put_phy(phy);
+				return retval;
+			}
+			hcd->phy = phy;
+			hcd->remove_phy = 1;
+		}
+	}
+
 	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);

 	/* Keep old behaviour if authorized_default is not in [0, 1]. */
@ -2603,7 +2622,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	 */
 	if ((retval = hcd_buffer_create(hcd)) != 0) {
 		dev_dbg(hcd->self.controller, "pool alloc failed\n");
-		return retval;
+		goto err_remove_phy;
 	}

 	if ((retval = usb_register_bus(&hcd->self)) < 0)
@ -2693,12 +2712,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
 		usb_hcd_poll_rh_status(hcd);

-	/*
-	 * Host controllers don't generate their own wakeup requests;
-	 * they only forward requests from the root hub.  Therefore
-	 * controllers should always be enabled for remote wakeup.
-	 */
-	device_wakeup_enable(hcd->self.controller);
 	return retval;

 error_create_attr_group:
@ -2734,6 +2747,12 @@ err_allocate_root_hub:
 	usb_deregister_bus(&hcd->self);
 err_register_bus:
 	hcd_buffer_destroy(hcd);
+err_remove_phy:
+	if (hcd->remove_phy && hcd->phy) {
+		usb_phy_shutdown(hcd->phy);
+		usb_put_phy(hcd->phy);
+		hcd->phy = NULL;
+	}
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_add_hcd);
@ -2806,6 +2825,11 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	usb_put_dev(hcd->self.root_hub);
 	usb_deregister_bus(&hcd->self);
 	hcd_buffer_destroy(hcd);
+	if (hcd->remove_phy && hcd->phy) {
+		usb_phy_shutdown(hcd->phy);
+		usb_put_phy(hcd->phy);
+		hcd->phy = NULL;
+	}
 }
 EXPORT_SYMBOL_GPL(usb_remove_hcd);

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@ -33,13 +33,6 @@

 #include "hub.h"

-/* if we are in debug mode, always announce new devices */
-#ifdef DEBUG
-#ifndef CONFIG_USB_ANNOUNCE_NEW_DEVICES
-#define CONFIG_USB_ANNOUNCE_NEW_DEVICES
-#endif
-#endif
-
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01

@ -1154,7 +1147,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			/* Tell khubd to disconnect the device or
 			 * check for a new connection
 			 */
-			if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+			    (portstatus & USB_PORT_STAT_OVERCURRENT))
 				set_bit(port1, hub->change_bits);

 		} else if (portstatus & USB_PORT_STAT_ENABLE) {
@ -1607,7 +1601,7 @@ static void hub_disconnect(struct usb_interface *intf)
 {
 	struct usb_hub *hub = usb_get_intfdata(intf);
 	struct usb_device *hdev = interface_to_usbdev(intf);
-	int i;
+	int port1;

 	/* Take the hub off the event list and don't let it be added again */
 	spin_lock_irq(&hub_event_lock);
@ -1622,11 +1616,15 @@ static void hub_disconnect(struct usb_interface *intf)
 	hub->error = 0;
 	hub_quiesce(hub, HUB_DISCONNECT);

+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	port1 = hdev->maxchild;
+	hdev->maxchild = 0;
 	usb_set_intfdata(intf, NULL);
+	spin_unlock_irq(&device_state_lock);

-	for (i = 0; i < hdev->maxchild; i++)
-		usb_hub_remove_port_device(hub, i + 1);
-	hub->hdev->maxchild = 0;
+	for (; port1 > 0; --port1)
+		usb_hub_remove_port_device(hub, port1);

 	if (hub->hdev->speed == USB_SPEED_HIGH)
 		highspeed_hubs--;
@ -2235,17 +2233,13 @@ static int usb_enumerate_device(struct usb_device *udev)
 			return err;
 		}
 	}
-	if (udev->wusb == 1 && udev->authorized == 0) {
-		udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-		udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-		udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	} else {
+
 	/* read the standard strings and cache them if present */
 	udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
 	udev->manufacturer = usb_cache_string(udev,
 					      udev->descriptor.iManufacturer);
 	udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
-	}
+
 	err = usb_enumerate_device_otg(udev);
 	if (err < 0)
 		return err;
@ -2427,16 +2421,6 @@ int usb_deauthorize_device(struct usb_device *usb_dev)
 	usb_dev->authorized = 0;
 	usb_set_configuration(usb_dev, -1);

-	kfree(usb_dev->product);
-	usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->serial);
-	usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-
-	usb_destroy_configuration(usb_dev);
-	usb_dev->descriptor.bNumConfigurations = 0;
-
 out_unauthorized:
 	usb_unlock_device(usb_dev);
 	return 0;
@ -2464,17 +2448,7 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		goto error_device_descriptor;
 	}

-	kfree(usb_dev->product);
-	usb_dev->product = NULL;
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = NULL;
-	kfree(usb_dev->serial);
-	usb_dev->serial = NULL;
-
 	usb_dev->authorized = 1;
-	result = usb_enumerate_device(usb_dev);
-	if (result < 0)
-		goto error_enumerate;
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
@ -2490,7 +2464,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
 	}
 	dev_info(&usb_dev->dev, "authorized to connect\n");

-error_enumerate:
 error_device_descriptor:
 	usb_autosuspend_device(usb_dev);
 error_autoresume:
@ -2523,10 +2496,25 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 #define HUB_LONG_RESET_TIME	200
 #define HUB_RESET_TIMEOUT	800

+/*
+ * "New scheme" enumeration causes an extra state transition to be
+ * exposed to an xhci host and causes USB3 devices to receive control
+ * commands in the default state.  This has been seen to cause
+ * enumeration failures, so disable this enumeration scheme for USB3
+ * devices.
+ */
+static bool use_new_scheme(struct usb_device *udev, int retry)
+{
+	if (udev->speed == USB_SPEED_SUPER)
+		return false;
+
+	return USE_NEW_SCHEME(retry);
+}
+
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm);

-/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
 * Port worm reset is required to recover
 */
 static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
@ -3334,7 +3322,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)

 		udev = hub->ports[port1 - 1]->child;
 		if (udev && udev->can_submit) {
-			dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
+			dev_warn(&intf->dev, "port %d not suspended yet\n",
+					port1);
 			if (PMSG_IS_AUTO(msg))
 				return -EBUSY;
 		}
@ -3981,6 +3970,20 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
 	}
 }

+static int hub_enable_device(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd->driver->enable_device)
+		return 0;
+	if (udev->state == USB_STATE_ADDRESS)
+		return 0;
+	if (udev->state != USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	return hcd->driver->enable_device(hcd, udev);
+}
+
 /* Reset device, (re)assign address, get device descriptor.
 * Device connection must be stable, no more debouncing needed.
 * Returns device in USB_STATE_ADDRESS, except on error.
@ -4093,7 +4096,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * this area, and this is how Linux has done it for ages.
 	 * Change it cautiously.
 	 *
-	 * NOTE:  If USE_NEW_SCHEME() is true we will start by issuing
+	 * NOTE:  If use_new_scheme() is true we will start by issuing
 	 * a 64-byte GET_DESCRIPTOR request.  This is what Windows does,
 	 * so it may help with some non-standards-compliant devices.
 	 * Otherwise we start with SET_ADDRESS and then try to read the
@ -4101,10 +4104,17 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * value.
 	 */
 	for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
-		if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
+		bool did_new_scheme = false;
+
+		if (use_new_scheme(udev, retry_counter)) {
 			struct usb_device_descriptor *buf;
 			int r = 0;

+			did_new_scheme = true;
+			retval = hub_enable_device(udev);
+			if (retval < 0)
+				goto fail;
+
 #define GET_DESCRIPTOR_BUFSIZE	64
 			buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
 			if (!buf) {
@ -4193,7 +4203,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 			 *  - read ep0 maxpacket even for high and low speed,
 			 */
 			msleep(10);
-			if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
+			/* use_new_scheme() checks the speed which may have
+			 * changed since the initial look so we cache the result
+			 * in did_new_scheme
+			 */
+			if (did_new_scheme)
 				break;
 		}

@ -4900,7 +4914,7 @@ static void hub_events(void)

 static int hub_thread(void *__unused)
 {
-	/* khubd needs to be freezable to avoid intefering with USB-PERSIST
+	/* khubd needs to be freezable to avoid interfering with USB-PERSIST
 	 * port handover.  Otherwise it might see that a full-speed device
 	 * was gone before the EHCI controller had handed its port over to
 	 * the companion full-speed controller.
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@ -78,7 +78,7 @@ struct usb_hub {

 /**
 * struct usb port - kernel's representation of a usb port
- * @child: usb device attatched to the port
+ * @child: usb device attached to the port
 * @dev: generic device interface
 * @port_owner: port's owner
 * @connect_type: port's connect type
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@ -6,7 +6,6 @@
 #include <linux/usb.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/timer.h>
 #include <linux/ctype.h>
@ -218,7 +217,7 @@ EXPORT_SYMBOL_GPL(usb_interrupt_msg);
 *
 * Return:
 * If successful, 0. Otherwise a negative error number. The number of actual
- * bytes transferred will be stored in the @actual_length paramater.
+ * bytes transferred will be stored in the @actual_length parameter.
 *
 */
 int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
@ -518,7 +517,7 @@ void usb_sg_wait(struct usb_sg_request *io)
 		io->urbs[i]->dev = io->dev;
 		retval = usb_submit_urb(io->urbs[i], GFP_ATOMIC);

-		/* after we submit, let completions or cancelations fire;
+		/* after we submit, let completions or cancellations fire;
 		 * we handshake using io->status.
 		 */
 		spin_unlock_irq(&io->lock);
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@ -98,9 +98,6 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Alcor Micro Corp. Hub */
 	{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },

-	/* MicroTouch Systems touchscreen */
-	{ USB_DEVICE(0x0596, 0x051e), .driver_info = USB_QUIRK_RESET_RESUME },
-
 	/* appletouch */
 	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },

--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@ -837,7 +837,7 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev)
 	device_remove_bin_file(dev, &dev_bin_attr_descriptors);
 }

-/* Interface Accociation Descriptor fields */
+/* Interface Association Descriptor fields */
 #define usb_intf_assoc_attr(field, format_string)			\
 static ssize_t								\
 iad_##field##_show(struct device *dev, struct device_attribute *attr,	\
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@ -2,7 +2,6 @@
 #include <linux/string.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
-#include <linux/init.h>
 #include <linux/log2.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
@ -53,7 +52,7 @@ EXPORT_SYMBOL_GPL(usb_init_urb);
 *	valid options for this.
 *
 * Creates an urb for the USB driver to use, initializes a few internal
- * structures, incrementes the usage counter, and returns a pointer to it.
+ * structures, increments the usage counter, and returns a pointer to it.
 *
 * If the driver want to use this urb for interrupt, control, or bulk
 * endpoints, pass '0' as the number of iso packets.
@ -281,7 +280,7 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
 *
 * Device drivers must explicitly request that repetition, by ensuring that
 * some URB is always on the endpoint's queue (except possibly for short
- * periods during completion callacks).  When there is no longer an urb
+ * periods during completion callbacks).  When there is no longer an urb
 * queued, the endpoint's bandwidth reservation is canceled.  This means
 * drivers can use their completion handlers to ensure they keep bandwidth
 * they need, by reinitializing and resubmitting the just-completed urb
@ -325,10 +324,14 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
 */
 int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 {
+	static int			pipetypes[4] = {
+		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+	};
 	int				xfertype, max;
 	struct usb_device		*dev;
 	struct usb_host_endpoint	*ep;
 	int				is_out;
+	unsigned int			allowed;

 	if (!urb || !urb->complete)
 		return -EINVAL;
@ -436,15 +439,10 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	if (urb->transfer_buffer_length > INT_MAX)
 		return -EMSGSIZE;

-#ifdef DEBUG
-	/* stuff that drivers shouldn't do, but which shouldn't
+	/*
+	 * stuff that drivers shouldn't do, but which shouldn't
 	 * cause problems in HCDs if they get it wrong.
 	 */
-	{
-	unsigned int	allowed;
-	static int pipetypes[4] = {
-		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
-	};

 	/* Check that the pipe's type matches the endpoint's type */
 	if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
@ -476,8 +474,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	if (allowed != urb->transfer_flags)
 		dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n",
 			urb->transfer_flags, allowed);
-	}
-#endif
+
 	/*
 	 * Force periodic transfer intervals to be legal values that are
 	 * a power of two (so HCDs don't need to).
@ -492,9 +489,9 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 		/* too small? */
 		switch (dev->speed) {
 		case USB_SPEED_WIRELESS:
-			if (urb->interval < 6)
+			if ((urb->interval < 6)
+				&& (xfertype == USB_ENDPOINT_XFER_INT))
 				return -EINVAL;
-			break;
 		default:
 			if (urb->interval <= 0)
 				return -EINVAL;
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@ -92,7 +92,7 @@ static int usb_acpi_check_port_connect_type(struct usb_device *hdev,
 	int ret = 0;

 	/*
-	 * Accoding to ACPI Spec 9.13. PLD indicates whether usb port is
+	 * According to ACPI Spec 9.13. PLD indicates whether usb port is
 	 * user visible and _UPC indicates whether it is connectable. If
 	 * the port was visible and connectable, it could be freely connected
 	 * and disconnected with USB devices. If no visible and connectable,
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@ -2935,6 +2935,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 	if (retval < 0)
 		goto error3;

+	device_wakeup_enable(hcd->self.controller);
+
 	dwc2_hcd_dump_state(hsotg);

 	dwc2_enable_global_interrupts(hsotg);
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@ -70,6 +70,13 @@ config USB_DWC3_PCI
 	  One such PCIe-based platform is Synopsys' PCIe HAPS model of
 	  this IP.

+config USB_DWC3_KEYSTONE
+	tristate "Texas Instruments Keystone2 Platforms"
+	default USB_DWC3
+	help
+	  Support of USB2/3 functionality in TI Keystone2 platforms.
+	  Say 'Y' or 'M' here if you have one such device
+
 comment "Debugging features"

 config USB_DWC3_DEBUG
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@ -32,3 +32,4 @@ endif
 obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
 obj-$(CONFIG_USB_DWC3_EXYNOS)		+= dwc3-exynos.o
 obj-$(CONFIG_USB_DWC3_PCI)		+= dwc3-pci.o
+obj-$(CONFIG_USB_DWC3_KEYSTONE)		+= dwc3-keystone.o
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@ -50,6 +50,7 @@ static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos)

 	exynos->usb2_phy = pdev;
 	pdata.type = USB_PHY_TYPE_USB2;
+	pdata.gpio_reset = -1;

 	ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata));
 	if (ret)
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@ -0,0 +1,202 @@
+/**
+ * dwc3-keystone.c - Keystone Specific Glue layer
+ *
+ * Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: WingMan Kwok <w-kwok2@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+/* USBSS register offsets */
+#define USBSS_REVISION		0x0000
+#define USBSS_SYSCONFIG		0x0010
+#define USBSS_IRQ_EOI		0x0018
+#define USBSS_IRQSTATUS_RAW_0	0x0020
+#define USBSS_IRQSTATUS_0	0x0024
+#define USBSS_IRQENABLE_SET_0	0x0028
+#define USBSS_IRQENABLE_CLR_0	0x002c
+
+/* IRQ register bits */
+#define USBSS_IRQ_EOI_LINE(n)	BIT(n)
+#define USBSS_IRQ_EVENT_ST	BIT(0)
+#define USBSS_IRQ_COREIRQ_EN	BIT(0)
+#define USBSS_IRQ_COREIRQ_CLR	BIT(0)
+
+static u64 kdwc3_dma_mask;
+
+struct dwc3_keystone {
+	struct device			*dev;
+	struct clk			*clk;
+	void __iomem			*usbss;
+};
+
+static inline u32 kdwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void kdwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+static void kdwc3_enable_irqs(struct dwc3_keystone *kdwc)
+{
+	u32 val;
+
+	val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0);
+	val |= USBSS_IRQ_COREIRQ_EN;
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val);
+}
+
+static void kdwc3_disable_irqs(struct dwc3_keystone *kdwc)
+{
+	u32 val;
+
+	val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0);
+	val &= ~USBSS_IRQ_COREIRQ_EN;
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val);
+}
+
+static irqreturn_t dwc3_keystone_interrupt(int irq, void *_kdwc)
+{
+	struct dwc3_keystone	*kdwc = _kdwc;
+
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_CLR_0, USBSS_IRQ_COREIRQ_CLR);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQSTATUS_0, USBSS_IRQ_EVENT_ST);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, USBSS_IRQ_COREIRQ_EN);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQ_EOI, USBSS_IRQ_EOI_LINE(0));
+
+	return IRQ_HANDLED;
+}
+
+static int kdwc3_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct device_node	*node = pdev->dev.of_node;
+	struct dwc3_keystone	*kdwc;
+	struct resource		*res;
+	int			error, irq;
+
+	kdwc = devm_kzalloc(dev, sizeof(*kdwc), GFP_KERNEL);
+	if (!kdwc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, kdwc);
+
+	kdwc->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "missing usbss resource\n");
+		return -EINVAL;
+	}
+
+	kdwc->usbss = devm_ioremap_resource(dev, res);
+	if (IS_ERR(kdwc->usbss))
+		return PTR_ERR(kdwc->usbss);
+
+	kdwc3_dma_mask = dma_get_mask(dev);
+	dev->dma_mask = &kdwc3_dma_mask;
+
+	kdwc->clk = devm_clk_get(kdwc->dev, "usb");
+
+	error = clk_prepare_enable(kdwc->clk);
+	if (error < 0) {
+		dev_dbg(kdwc->dev, "unable to enable usb clock, err %d\n",
+			error);
+		return error;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing irq\n");
+		goto err_irq;
+	}
+
+	error = devm_request_irq(dev, irq, dwc3_keystone_interrupt, IRQF_SHARED,
+			dev_name(dev), kdwc);
+	if (error) {
+		dev_err(dev, "failed to request IRQ #%d --> %d\n",
+				irq, error);
+		goto err_irq;
+	}
+
+	kdwc3_enable_irqs(kdwc);
+
+	error = of_platform_populate(node, NULL, NULL, dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		goto err_core;
+	}
+
+	return 0;
+
+err_core:
+	kdwc3_disable_irqs(kdwc);
+err_irq:
+	clk_disable_unprepare(kdwc->clk);
+
+	return error;
+}
+
+static int kdwc3_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int kdwc3_remove(struct platform_device *pdev)
+{
+	struct dwc3_keystone *kdwc = platform_get_drvdata(pdev);
+
+	kdwc3_disable_irqs(kdwc);
+	device_for_each_child(&pdev->dev, NULL, kdwc3_remove_core);
+	clk_disable_unprepare(kdwc->clk);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id kdwc3_of_match[] = {
+	{ .compatible = "ti,keystone-dwc3", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, kdwc3_of_match);
+
+static struct platform_driver kdwc3_driver = {
+	.probe		= kdwc3_probe,
+	.remove		= kdwc3_remove,
+	.driver		= {
+		.name	= "keystone-dwc3",
+		.owner	        = THIS_MODULE,
+		.of_match_table	= kdwc3_of_match,
+	},
+};
+
+module_platform_driver(kdwc3_driver);
+
+MODULE_ALIAS("platform:keystone-dwc3");
+MODULE_AUTHOR("WingMan Kwok <w-kwok2@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 KEYSTONE Glue Layer");
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
 #include <linux/pm_runtime.h>
@ -120,9 +119,6 @@
 #define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	(1 << 1)

 struct dwc3_omap {
-	/* device lock */
-	spinlock_t		lock;
-
 	struct device		*dev;

 	int			irq;
@ -280,8 +276,6 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	struct dwc3_omap	*omap = _omap;
 	u32			reg;

-	spin_lock(&omap->lock);
-
 	reg = dwc3_omap_read_irqmisc_status(omap);

 	if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) {
@ -322,8 +316,6 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)

 	dwc3_omap_write_irq0_status(omap, reg);

-	spin_unlock(&omap->lock);
-
 	return IRQ_HANDLED;
 }

@ -449,8 +441,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		}
 	}

-	spin_lock_init(&omap->lock);
-
 	omap->dev	= dev;
 	omap->irq	= irq;
 	omap->base	= base;
@ -535,7 +525,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		edev = of_extcon_get_extcon_dev(dev, 0);
 		if (IS_ERR(edev)) {
 			dev_vdbg(dev, "couldn't get extcon device\n");
-			ret = PTR_ERR(edev);
+			ret = -EPROBE_DEFER;
 			goto err2;
 		}

--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@ -52,6 +52,7 @@ static int dwc3_pci_register_phys(struct dwc3_pci *glue)

 	glue->usb2_phy = pdev;
 	pdata.type = USB_PHY_TYPE_USB2;
+	pdata.gpio_reset = -1;

 	ret = platform_device_add_data(glue->usb2_phy, &pdata, sizeof(pdata));
 	if (ret)
@ -182,7 +183,7 @@ static void dwc3_pci_remove(struct pci_dev *pci)
 	pci_disable_device(pci);
 }

-static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
+static const struct pci_device_id dwc3_pci_id_table[] = {
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
 				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@ -1650,7 +1650,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 		dev_vdbg(dwc->dev, "initializing %s\n", dep->name);

 		if (epnum == 0 || epnum == 1) {
-			dep->endpoint.maxpacket = 512;
+			usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
 			dep->endpoint.maxburst = 1;
 			dep->endpoint.ops = &dwc3_gadget_ep0_ops;
 			if (!epnum)
@ -1658,7 +1658,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 		} else {
 			int		ret;

-			dep->endpoint.maxpacket = 1024;
+			usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
 			dep->endpoint.max_streams = 15;
 			dep->endpoint.ops = &dwc3_gadget_ep_ops;
 			list_add_tail(&dep->endpoint.ep_list,
@ -2596,6 +2596,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	dwc->gadget.sg_supported	= true;
 	dwc->gadget.name		= "dwc3-gadget";

+	/*
+	 * Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
+	 * on ep out.
+	 */
+	dwc->gadget.quirk_ep_out_aligned_size = true;
+
 	/*
 	 * REVISIT: Here we should clear all pending IRQs to be
 	 * sure we're starting from a well known location.
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@ -216,6 +216,13 @@ config USB_FOTG210_UDC
 	   Say "y" to link the driver statically, or "m" to build a
 	   dynamically linked module called "fotg210_udc".

+config USB_GR_UDC
+       tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
+       depends on HAS_DMA
+       help
+          Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+	  VHDL IP core library.
+
 config USB_OMAP
 	tristate "OMAP USB Device Controller"
 	depends on ARCH_OMAP1
@ -294,11 +301,11 @@ config USB_PXA27X
 	   gadget drivers to also be dynamically linked.

 config USB_S3C_HSOTG
-	tristate "S3C HS/OtG USB Device controller"
-	depends on S3C_DEV_USB_HSOTG
+	depends on ARM
+	tristate "Designware/S3C HS/OtG USB Device controller"
 	help
-	  The Samsung S3C64XX USB2.0 high-speed gadget controller
-	  integrated into the S3C64XX series SoC.
+	  The Designware USB2.0 high-speed gadget controller
+	  integrated into many SoCs.

 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
@ -512,9 +519,6 @@ config USB_U_SERIAL
 config USB_U_ETHER
 	tristate

-config USB_U_RNDIS
-	tristate
-
 config USB_F_SERIAL
 	tristate

@ -542,6 +546,9 @@ config USB_F_RNDIS
 config USB_F_MASS_STORAGE
 	tristate

+config USB_F_FS
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@ -642,7 +649,6 @@ config USB_CONFIGFS_RNDIS
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
-	select USB_U_RNDIS
 	select USB_F_RNDIS
 	help
 	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
@ -690,6 +696,31 @@ config USB_CONFIGFS_MASS_STORAGE
 	  device (in much the same way as the "loop" device driver),
 	  specified as a module parameter or sysfs option.

+config USB_CONFIGFS_F_LB_SS
+	boolean "Loopback and sourcesink function (for testing)"
+	depends on USB_CONFIGFS
+	select USB_F_SS_LB
+	help
+	  Loopback function loops back a configurable number of transfers.
+	  Sourcesink function either sinks and sources bulk data.
+	  It also implements control requests, for "chapter 9" conformance.
+	  Make this be the first driver you try using on top of any new
+	  USB peripheral controller driver.  Then you can use host-side
+	  test software, like the "usbtest" driver, to put your hardware
+	  and its driver through a basic set of functional tests.
+
+config USB_CONFIGFS_F_FS
+	boolean "Function filesystem (FunctionFS)"
+	depends on USB_CONFIGFS
+	select USB_F_FS
+	help
+	  The Function Filesystem (FunctionFS) lets one create USB
+	  composite functions in user space in the same way GadgetFS
+	  lets one create USB gadgets in user space.  This allows creation
+	  of composite gadgets such that some of the functions are
+	  implemented in kernel space (for instance Ethernet, serial or
+	  mass storage) and other are implemented in user space.
+
 config USB_ZERO
 	tristate "Gadget Zero (DEVELOPMENT)"
 	select USB_LIBCOMPOSITE
@ -760,7 +791,6 @@ config USB_ETH
 	depends on NET
 	select USB_LIBCOMPOSITE
 	select USB_U_ETHER
-	select USB_U_RNDIS
 	select USB_F_ECM
 	select USB_F_SUBSET
 	select CRC32
@ -864,6 +894,7 @@ config USB_GADGETFS
 config USB_FUNCTIONFS
 	tristate "Function Filesystem"
 	select USB_LIBCOMPOSITE
+	select USB_F_FS
 	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
 	help
 	  The Function Filesystem (FunctionFS) lets one create USB
@ -883,6 +914,8 @@ config USB_FUNCTIONFS_ETH
 	bool "Include configuration with CDC ECM (Ethernet)"
 	depends on USB_FUNCTIONFS && NET
 	select USB_U_ETHER
+	select USB_F_ECM
+	select USB_F_SUBSET
 	help
 	  Include a configuration with CDC ECM function (Ethernet) and the
 	  Function Filesystem.
@ -891,7 +924,7 @@ config USB_FUNCTIONFS_RNDIS
 	bool "Include configuration with RNDIS (Ethernet)"
 	depends on USB_FUNCTIONFS && NET
 	select USB_U_ETHER
-	select USB_U_RNDIS
+	select USB_F_RNDIS
 	help
 	  Include a configuration with RNDIS function (Ethernet) and the Filesystem.

@ -1065,7 +1098,6 @@ config USB_G_MULTI
 config USB_G_MULTI_RNDIS
 	bool "RNDIS + CDC Serial + Storage configuration"
 	depends on USB_G_MULTI
-	select USB_U_RNDIS
 	select USB_F_RNDIS
 	default y
 	help
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@ -7,7 +7,7 @@ ccflags-$(CONFIG_USB_GADGET_VERBOSE)	+= -DVERBOSE_DEBUG
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
 libcomposite-y			:= usbstring.o config.o epautoconf.o
-libcomposite-y			+= composite.o functions.o configfs.o
+libcomposite-y			+= composite.o functions.o configfs.o u_f.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
@ -35,6 +35,7 @@ mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 obj-$(CONFIG_USB_FOTG210_UDC)	+= fotg210-udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
+obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o

 # USB Functions
 usb_f_acm-y			:= f_acm.o
@ -47,8 +48,6 @@ obj-$(CONFIG_USB_F_SERIAL)	+= usb_f_serial.o
 usb_f_obex-y			:= f_obex.o
 obj-$(CONFIG_USB_F_OBEX)	+= usb_f_obex.o
 obj-$(CONFIG_USB_U_ETHER)	+= u_ether.o
-u_rndis-y			:= rndis.o
-obj-$(CONFIG_USB_U_RNDIS)	+= u_rndis.o
 usb_f_ncm-y			:= f_ncm.o
 obj-$(CONFIG_USB_F_NCM)		+= usb_f_ncm.o
 usb_f_ecm-y			:= f_ecm.o
@ -59,10 +58,12 @@ usb_f_eem-y			:= f_eem.o
 obj-$(CONFIG_USB_F_EEM)		+= usb_f_eem.o
 usb_f_ecm_subset-y		:= f_subset.o
 obj-$(CONFIG_USB_F_SUBSET)	+= usb_f_ecm_subset.o
-usb_f_rndis-y			:= f_rndis.o
+usb_f_rndis-y			:= f_rndis.o rndis.o
 obj-$(CONFIG_USB_F_RNDIS)	+= usb_f_rndis.o
 usb_f_mass_storage-y		:= f_mass_storage.o storage_common.o
 obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o
+usb_f_fs-y			:= f_fs.o
+obj-$(CONFIG_USB_F_FS)		+= usb_f_fs.o

 #
 # USB gadget drivers
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@ -107,7 +107,7 @@ static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
 */
 #define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS

-#endif /* CONFIG_USB_DEBUG */
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */

 FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);

--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@ -40,7 +40,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
@ -446,7 +445,7 @@ static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep)
 	ep->ep.ops = &udc_ep_ops;
 	INIT_LIST_HEAD(&ep->queue);

-	ep->ep.maxpacket = (u16) ~0;
+	usb_ep_set_maxpacket_limit(&ep->ep,(u16) ~0);
 	/* set NAK */
 	tmp = readl(&ep->regs->ctl);
 	tmp |= AMD_BIT(UDC_EPCTL_SNAK);
@ -1564,12 +1563,15 @@ static void udc_setup_endpoints(struct udc *dev)
 	}
 	/* EP0 max packet */
 	if (dev->gadget.speed == USB_SPEED_FULL) {
-		dev->ep[UDC_EP0IN_IX].ep.maxpacket = UDC_FS_EP0IN_MAX_PKT_SIZE;
-		dev->ep[UDC_EP0OUT_IX].ep.maxpacket =
-						UDC_FS_EP0OUT_MAX_PKT_SIZE;
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
+					   UDC_FS_EP0IN_MAX_PKT_SIZE);
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
+					   UDC_FS_EP0OUT_MAX_PKT_SIZE);
 	} else if (dev->gadget.speed == USB_SPEED_HIGH) {
-		dev->ep[UDC_EP0IN_IX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
-		dev->ep[UDC_EP0OUT_IX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
+					   UDC_EP0IN_MAX_PKT_SIZE);
+		usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
+					   UDC_EP0OUT_MAX_PKT_SIZE);
 	}

 	/*
@ -3338,7 +3340,7 @@ static int udc_remote_wakeup(struct udc *dev)
 }

 /* PCI device parameters */
-static DEFINE_PCI_DEVICE_TABLE(pci_id) = {
+static const struct pci_device_id pci_id[] = {
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
 		.class =	(PCI_CLASS_SERIAL_USB << 8) | 0xfe,
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@ -21,7 +21,6 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/proc_fs.h>
@ -834,7 +833,7 @@ static void udc_reinit(struct at91_udc *udc)
 		ep->ep.desc = NULL;
 		ep->stopped = 0;
 		ep->fifo_bank = 0;
-		ep->ep.maxpacket = ep->maxpacket;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket);
 		ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
 		/* initialize one queue per endpoint */
 		INIT_LIST_HEAD(&ep->queue);
@ -1759,15 +1758,15 @@ static int at91udc_probe(struct platform_device *pdev)

 	/* newer chips have more FIFO memory than rm9200 */
 	if (cpu_is_at91sam9260() || cpu_is_at91sam9g20()) {
-		udc->ep[0].maxpacket = 64;
-		udc->ep[3].maxpacket = 64;
-		udc->ep[4].maxpacket = 512;
-		udc->ep[5].maxpacket = 512;
+		usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64);
+		usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64);
+		usb_ep_set_maxpacket_limit(&udc->ep[4].ep, 512);
+		usb_ep_set_maxpacket_limit(&udc->ep[5].ep, 512);
 	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
-		udc->ep[3].maxpacket = 64;
+		usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64);
 	} else if (cpu_is_at91sam9263()) {
-		udc->ep[0].maxpacket = 64;
-		udc->ep[3].maxpacket = 64;
+		usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64);
+		usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64);
 	}

 	udc->udp_baseaddr = ioremap(res->start, resource_size(res));
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@ -1012,7 +1012,7 @@ static void nop_release(struct device *dev)

 }

-struct usb_gadget usba_gadget_template = {
+static struct usb_gadget usba_gadget_template = {
 	.ops		= &usba_udc_ops,
 	.max_speed	= USB_SPEED_HIGH,
 	.name		= "atmel_usba_udc",
@ -1904,7 +1904,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
 		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
 		ep->ep.ops = &usba_ep_ops;
-		ep->ep.maxpacket = ep->fifo_size;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size);
 		ep->udc = udc;
 		INIT_LIST_HEAD(&ep->queue);

@ -1957,7 +1957,8 @@ static struct usba_ep * usba_udc_pdata(struct platform_device *pdev,
 		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
 		ep->ep.ops = &usba_ep_ops;
 		ep->ep.name = pdata->ep[i].name;
-		ep->fifo_size = ep->ep.maxpacket = pdata->ep[i].fifo_size;
+		ep->fifo_size = pdata->ep[i].fifo_size;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->fifo_size);
 		ep->udc = udc;
 		INIT_LIST_HEAD(&ep->queue);
 		ep->nr_banks = pdata->ep[i].nr_banks;
@ -1995,14 +1996,12 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;

-	pclk = clk_get(&pdev->dev, "pclk");
+	pclk = devm_clk_get(&pdev->dev, "pclk");
 	if (IS_ERR(pclk))
 		return PTR_ERR(pclk);
-	hclk = clk_get(&pdev->dev, "hclk");
-	if (IS_ERR(hclk)) {
-		ret = PTR_ERR(hclk);
-		goto err_get_hclk;
-	}
+	hclk = devm_clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(hclk))
+		return PTR_ERR(hclk);

 	spin_lock_init(&udc->lock);
 	udc->pdev = pdev;
@ -2011,17 +2010,17 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	udc->vbus_pin = -ENODEV;

 	ret = -ENOMEM;
-	udc->regs = ioremap(regs->start, resource_size(regs));
+	udc->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
 	if (!udc->regs) {
 		dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
-		goto err_map_regs;
+		return ret;
 	}
 	dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
 		 (unsigned long)regs->start, udc->regs);
-	udc->fifo = ioremap(fifo->start, resource_size(fifo));
+	udc->fifo = devm_ioremap(&pdev->dev, fifo->start, resource_size(fifo));
 	if (!udc->fifo) {
 		dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
-		goto err_map_fifo;
+		return ret;
 	}
 	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
 		 (unsigned long)fifo->start, udc->fifo);
@ -2032,7 +2031,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(pclk);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to enable pclk, aborting.\n");
-		goto err_clk_enable;
+		return ret;
 	}
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
@ -2043,22 +2042,22 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	else
 		udc->usba_ep = usba_udc_pdata(pdev, udc);

-	if (IS_ERR(udc->usba_ep)) {
-		ret = PTR_ERR(udc->usba_ep);
-		goto err_alloc_ep;
-	}
+	if (IS_ERR(udc->usba_ep))
+		return PTR_ERR(udc->usba_ep);

-	ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
+	ret = devm_request_irq(&pdev->dev, irq, usba_udc_irq, 0,
+				"atmel_usba_udc", udc);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
 			irq, ret);
-		goto err_request_irq;
+		return ret;
 	}
 	udc->irq = irq;

 	if (gpio_is_valid(udc->vbus_pin)) {
 		if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
-			ret = request_irq(gpio_to_irq(udc->vbus_pin),
+			ret = devm_request_irq(&pdev->dev,
+					gpio_to_irq(udc->vbus_pin),
 					usba_vbus_irq, 0,
 					"atmel_usba_udc", udc);
 			if (ret) {
@ -2077,31 +2076,13 @@ static int __init usba_udc_probe(struct platform_device *pdev)

 	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (ret)
-		goto err_add_udc;
+		return ret;

 	usba_init_debugfs(udc);
 	for (i = 1; i < udc->num_ep; i++)
 		usba_ep_init_debugfs(udc, &udc->usba_ep[i]);

 	return 0;
-
-err_add_udc:
-	if (gpio_is_valid(udc->vbus_pin))
-		free_irq(gpio_to_irq(udc->vbus_pin), udc);
-
-	free_irq(irq, udc);
-err_request_irq:
-err_alloc_ep:
-err_clk_enable:
-	iounmap(udc->fifo);
-err_map_fifo:
-	iounmap(udc->regs);
-err_map_regs:
-	clk_put(hclk);
-err_get_hclk:
-	clk_put(pclk);
-
-	return ret;
 }

 static int __exit usba_udc_remove(struct platform_device *pdev)
@ -2117,16 +2098,6 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 		usba_ep_cleanup_debugfs(&udc->usba_ep[i]);
 	usba_cleanup_debugfs(udc);

-	if (gpio_is_valid(udc->vbus_pin)) {
-		free_irq(gpio_to_irq(udc->vbus_pin), udc);
-	}
-
-	free_irq(udc->irq, udc);
-	iounmap(udc->fifo);
-	iounmap(udc->regs);
-	clk_put(udc->hclk);
-	clk_put(udc->pclk);
-
 	return 0;
 }

--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@ -19,7 +19,6 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/kconfig.h>
@ -549,7 +548,7 @@ static void bcm63xx_ep_setup(struct bcm63xx_udc *udc)

 		if (idx < 0)
 			continue;
-		udc->bep[idx].ep.maxpacket = max_pkt;
+		usb_ep_set_maxpacket_limit(&udc->bep[idx].ep, max_pkt);

 		val = (idx << USBD_CSR_EP_LOG_SHIFT) |
 		      (cfg->dir << USBD_CSR_EP_DIR_SHIFT) |
@ -943,7 +942,7 @@ static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
 		bep->ep.ops = &bcm63xx_udc_ep_ops;
 		list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
 		bep->halted = 0;
-		bep->ep.maxpacket = BCM63XX_MAX_CTRL_PKT;
+		usb_ep_set_maxpacket_limit(&bep->ep, BCM63XX_MAX_CTRL_PKT);
 		bep->udc = udc;
 		bep->ep.desc = NULL;
 		INIT_LIST_HEAD(&bep->queue);
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@ -1452,8 +1452,22 @@ unknown:
 			struct usb_configuration	*c;

 			c = cdev->config;
-			if (c && c->setup)
+			if (!c)
+				goto done;
+
+			/* try current config's setup */
+			if (c->setup) {
 				value = c->setup(c, ctrl);
+				goto done;
+			}
+
+			/* try the only function in the current config */
+			if (!list_is_singular(&c->functions))
+				goto done;
+			f = list_first_entry(&c->functions, struct usb_function,
+					     list);
+			if (f->setup)
+				value = f->setup(f, ctrl);
 		}

 		goto done;
@ -1714,7 +1728,7 @@ composite_resume(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_function		*f;
-	u8				maxpower;
+	u16				maxpower;

 	/* REVISIT:  should we have config level
 	 * suspend/resume callbacks?
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@ -4,6 +4,7 @@
 #include <linux/device.h>
 #include <linux/usb/composite.h>
 #include <linux/usb/gadget_configfs.h>
+#include "configfs.h"

 int check_user_usb_string(const char *name,
 		struct usb_gadget_strings *stringtab_dev)
@ -564,6 +565,13 @@ static struct config_group *function_make(
 		usb_put_function_instance(fi);
 		return ERR_PTR(ret);
 	}
+	if (fi->set_inst_name) {
+		ret = fi->set_inst_name(fi, instance_name);
+		if (ret) {
+			usb_put_function_instance(fi);
+			return ERR_PTR(ret);
+		}
+	}

 	gi = container_of(group, struct gadget_info, functions_group);

--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@ -951,7 +951,7 @@ static void init_dummy_udc_hw(struct dummy *dum)
 		list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
 		ep->halted = ep->wedged = ep->already_seen =
 				ep->setup_stage = 0;
-		ep->ep.maxpacket = ~0;
+		usb_ep_set_maxpacket_limit(&ep->ep, ~0);
 		ep->ep.max_streams = 16;
 		ep->last_io = jiffies;
 		ep->gadget = &dum->gadget;
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@ -11,7 +11,6 @@

 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/device.h>

@ -58,7 +57,7 @@ ep_matches (
 		return 0;

 	/* only support ep0 for portable CONTROL traffic */
-	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	type = usb_endpoint_type(desc);
 	if (USB_ENDPOINT_XFER_CONTROL == type)
 		return 0;

@ -129,7 +128,7 @@ ep_matches (
 	 * and wants to know the maximum possible, provide the info.
 	 */
 	if (desc->wMaxPacketSize == 0)
-		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket);
+		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);

 	/* endpoint maxpacket size is an input parameter, except for bulk
 	 * where it's an output parameter representing the full speed limit.
@ -145,7 +144,7 @@ ep_matches (

 	case USB_ENDPOINT_XFER_ISOC:
 		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
-		if (ep->maxpacket < max)
+		if (ep->maxpacket_limit < max)
 			return 0;
 		if (!gadget_is_dualspeed(gadget) && max > 1023)
 			return 0;
@ -178,7 +177,7 @@ ep_matches (

 	/* report (variable) full speed bulk maxpacket */
 	if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
-		int size = ep->maxpacket;
+		int size = ep->maxpacket_limit;

 		/* min() doesn't work on bitfields with gcc-3.5 */
 		if (size > 64)
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@ -691,7 +691,6 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	int			status;
 	struct usb_ep		*ep;

-#ifndef USBF_ECM_INCLUDED
 	struct f_ecm_opts	*ecm_opts;

 	if (!can_support_ecm(cdev->gadget))
@ -715,7 +714,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 			return status;
 		ecm_opts->bound = true;
 	}
-#endif
+
 	us = usb_gstrings_attach(cdev, ecm_strings,
 				 ARRAY_SIZE(ecm_string_defs));
 	if (IS_ERR(us))
@ -834,74 +833,6 @@ fail:
 	return status;
 }

-#ifdef USBF_ECM_INCLUDED
-
-static void
-ecm_old_unbind(struct usb_configuration *c, struct usb_function *f)
-{
-	struct f_ecm		*ecm = func_to_ecm(f);
-
-	DBG(c->cdev, "ecm unbind\n");
-
-	usb_free_all_descriptors(f);
-
-	kfree(ecm->notify_req->buf);
-	usb_ep_free_request(ecm->notify, ecm->notify_req);
-	kfree(ecm);
-}
-
-/**
- * ecm_bind_config - add CDC Ethernet network link to a configuration
- * @c: the configuration to support the network link
- * @ethaddr: a buffer in which the ethernet address of the host side
- *	side of the link was recorded
- * @dev: eth_dev structure
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gether_setup().  Caller is also responsible
- * for calling @gether_cleanup() before module unload.
- */
-int
-ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-		struct eth_dev *dev)
-{
-	struct f_ecm	*ecm;
-	int		status;
-
-	if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
-		return -EINVAL;
-
-	/* allocate and initialize one new instance */
-	ecm = kzalloc(sizeof *ecm, GFP_KERNEL);
-	if (!ecm)
-		return -ENOMEM;
-
-	/* export host's Ethernet address in CDC format */
-	snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr);
-	ecm_string_defs[1].s = ecm->ethaddr;
-
-	ecm->port.ioport = dev;
-	ecm->port.cdc_filter = DEFAULT_FILTER;
-
-	ecm->port.func.name = "cdc_ethernet";
-	/* descriptors are per-instance copies */
-	ecm->port.func.bind = ecm_bind;
-	ecm->port.func.unbind = ecm_old_unbind;
-	ecm->port.func.set_alt = ecm_set_alt;
-	ecm->port.func.get_alt = ecm_get_alt;
-	ecm->port.func.setup = ecm_setup;
-	ecm->port.func.disable = ecm_disable;
-
-	status = usb_add_function(c, &ecm->port.func);
-	if (status)
-		kfree(ecm);
-	return status;
-}
-
-#else
-
 static inline struct f_ecm_opts *to_f_ecm_opts(struct config_item *item)
 {
 	return container_of(to_config_group(item), struct f_ecm_opts,
@ -1040,5 +971,3 @@ static struct usb_function *ecm_alloc(struct usb_function_instance *fi)
 DECLARE_USB_FUNCTION_INIT(ecm, ecm_alloc_inst, ecm_alloc);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Brownell");
-
-#endif
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@ -20,6 +20,8 @@
 #include <linux/sched.h>
 #include <linux/usb/g_hid.h>

+#include "u_f.h"
+
 static int major, minors;
 static struct class *hidg_class;

@ -334,20 +336,10 @@ static int f_hidg_open(struct inode *inode, struct file *fd)
 /*-------------------------------------------------------------------------*/
 /*                                usb_function                             */

-static struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length)
+static inline struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep,
+						    unsigned length)
 {
-	struct usb_request *req;
-
-	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
-	if (req) {
-		req->length = length;
-		req->buf = kmalloc(length, GFP_ATOMIC);
-		if (!req->buf) {
-			usb_ep_free_request(ep, req);
-			req = NULL;
-		}
-	}
-	return req;
+	return alloc_ep_req(ep, length, length);
 }

 static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@ -20,6 +20,7 @@
 #include <linux/usb/composite.h>

 #include "g_zero.h"
+#include "u_f.h"

 /*
 * LOOPBACK FUNCTION ... a testing vehicle for USB peripherals,
@ -119,7 +120,7 @@ static struct usb_endpoint_descriptor ss_loop_source_desc = {
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };

-struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 	.bMaxBurst =		0,
@ -135,7 +136,7 @@ static struct usb_endpoint_descriptor ss_loop_sink_desc = {
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };

-struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
 	.bMaxBurst =		0,
@ -230,6 +231,14 @@ autoconf_fail:

 static void lb_free_func(struct usb_function *f)
 {
+	struct f_lb_opts *opts;
+
+	opts = container_of(f->fi, struct f_lb_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+
 	usb_free_all_descriptors(f);
 	kfree(func_to_loop(f));
 }
@ -293,6 +302,11 @@ static void disable_loopback(struct f_loopback *loop)
 	VDBG(cdev, "%s disabled\n", loop->function.name);
 }

+static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len)
+{
+	return alloc_ep_req(ep, len, buflen);
+}
+
 static int
 enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
 {
@ -332,7 +346,7 @@ fail0:
 	 * than 'buflen' bytes each.
 	 */
 	for (i = 0; i < qlen && result == 0; i++) {
-		req = alloc_ep_req(ep, 0);
+		req = lb_alloc_ep_req(ep, 0);
 		if (req) {
 			req->complete = loopback_complete;
 			result = usb_ep_queue(ep, req, GFP_ATOMIC);
@ -380,6 +394,11 @@ static struct usb_function *loopback_alloc(struct usb_function_instance *fi)
 		return ERR_PTR(-ENOMEM);

 	lb_opts = container_of(fi, struct f_lb_opts, func_inst);
+
+	mutex_lock(&lb_opts->lock);
+	lb_opts->refcnt++;
+	mutex_unlock(&lb_opts->lock);
+
 	buflen = lb_opts->bulk_buflen;
 	qlen = lb_opts->qlen;
 	if (!qlen)
@ -396,6 +415,118 @@ static struct usb_function *loopback_alloc(struct usb_function_instance *fi)
 	return &loop->function;
 }

+static inline struct f_lb_opts *to_f_lb_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_lb_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_lb_opts);
+CONFIGFS_ATTR_OPS(f_lb_opts);
+
+static void lb_attr_release(struct config_item *item)
+{
+	struct f_lb_opts *lb_opts = to_f_lb_opts(item);
+
+	usb_put_function_instance(&lb_opts->func_inst);
+}
+
+static struct configfs_item_operations lb_item_ops = {
+	.release		= lb_attr_release,
+	.show_attribute		= f_lb_opts_attr_show,
+	.store_attribute	= f_lb_opts_attr_store,
+};
+
+static ssize_t f_lb_opts_qlen_show(struct f_lb_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->qlen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_lb_opts_qlen_store(struct f_lb_opts *opts,
+				    const char *page, size_t len)
+{
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->qlen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_lb_opts_attribute f_lb_opts_qlen =
+	__CONFIGFS_ATTR(qlen, S_IRUGO | S_IWUSR,
+			f_lb_opts_qlen_show,
+			f_lb_opts_qlen_store);
+
+static ssize_t f_lb_opts_bulk_buflen_show(struct f_lb_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->bulk_buflen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_lb_opts_bulk_buflen_store(struct f_lb_opts *opts,
+				    const char *page, size_t len)
+{
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->bulk_buflen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_lb_opts_attribute f_lb_opts_bulk_buflen =
+	__CONFIGFS_ATTR(buflen, S_IRUGO | S_IWUSR,
+			f_lb_opts_bulk_buflen_show,
+			f_lb_opts_bulk_buflen_store);
+
+static struct configfs_attribute *lb_attrs[] = {
+	&f_lb_opts_qlen.attr,
+	&f_lb_opts_bulk_buflen.attr,
+	NULL,
+};
+
+static struct config_item_type lb_func_type = {
+	.ct_item_ops    = &lb_item_ops,
+	.ct_attrs	= lb_attrs,
+	.ct_owner       = THIS_MODULE,
+};
+
 static void lb_free_instance(struct usb_function_instance *fi)
 {
 	struct f_lb_opts *lb_opts;
@ -411,7 +542,14 @@ static struct usb_function_instance *loopback_alloc_instance(void)
 	lb_opts = kzalloc(sizeof(*lb_opts), GFP_KERNEL);
 	if (!lb_opts)
 		return ERR_PTR(-ENOMEM);
+	mutex_init(&lb_opts->lock);
 	lb_opts->func_inst.free_func_inst = lb_free_instance;
+	lb_opts->bulk_buflen = GZERO_BULK_BUFLEN;
+	lb_opts->qlen = GZERO_QLEN;
+
+	config_group_init_type_name(&lb_opts->func_inst.group, "",
+				    &lb_func_type);
+
 	return  &lb_opts->func_inst;
 }
 DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc);
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@ -32,6 +32,8 @@
 #include <linux/usb/audio.h>
 #include <linux/usb/midi.h>

+#include "u_f.h"
+
 MODULE_AUTHOR("Ben Williamson");
 MODULE_LICENSE("GPL v2");

@ -191,20 +193,10 @@ static struct usb_gadget_strings *midi_strings[] = {
 	NULL,
 };

-static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
+static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep,
+						    unsigned length)
 {
-	struct usb_request *req;
-
-	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
-	if (req) {
-		req->length = length;
-		req->buf = kmalloc(length, GFP_ATOMIC);
-		if (!req->buf) {
-			usb_ep_free_request(ep, req);
-			req = NULL;
-		}
-	}
-	return req;
+	return alloc_ep_req(ep, length, length);
 }

 static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
@ -365,7 +357,7 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	/* allocate a bunch of read buffers and queue them all at once. */
 	for (i = 0; i < midi->qlen && err == 0; i++) {
 		struct usb_request *req =
-			alloc_ep_req(midi->out_ep, midi->buflen);
+			midi_alloc_ep_req(midi->out_ep, midi->buflen);
 		if (req == NULL)
 			return -ENOMEM;

@ -546,7 +538,7 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req)
 		return;

 	if (!req)
-		req = alloc_ep_req(ep, midi->buflen);
+		req = midi_alloc_ep_req(ep, midi->buflen);

 	if (!req) {
 		ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n");
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@ -1386,7 +1386,7 @@ static void ncm_unbind(struct usb_configuration *c, struct usb_function *f)
 	usb_ep_free_request(ncm->notify, ncm->notify_req);
 }

-struct usb_function *ncm_alloc(struct usb_function_instance *fi)
+static struct usb_function *ncm_alloc(struct usb_function_instance *fi)
 {
 	struct f_ncm		*ncm;
 	struct f_ncm_opts	*opts;
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@ -499,7 +499,7 @@ static void obex_unbind(struct usb_configuration *c, struct usb_function *f)
 	usb_free_all_descriptors(f);
 }

-struct usb_function *obex_alloc(struct usb_function_instance *fi)
+static struct usb_function *obex_alloc(struct usb_function_instance *fi)
 {
 	struct f_obex	*obex;
 	struct f_serial_opts *opts;
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@ -689,7 +689,7 @@ static void pn_unbind(struct usb_configuration *c, struct usb_function *f)
 	usb_free_all_descriptors(f);
 }

-struct usb_function *phonet_alloc(struct usb_function_instance *fi)
+static struct usb_function *phonet_alloc(struct usb_function_instance *fi)
 {
 	struct f_phonet *fp;
 	struct f_phonet_opts *opts;
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@ -675,7 +675,6 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 	int			status;
 	struct usb_ep		*ep;

-#ifndef USB_FRNDIS_INCLUDED
 	struct f_rndis_opts *rndis_opts;

 	if (!can_support_rndis(c))
@ -697,7 +696,7 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 			return status;
 		rndis_opts->bound = true;
 	}
-#endif
+
 	us = usb_gstrings_attach(cdev, rndis_strings,
 				 ARRAY_SIZE(rndis_string_defs));
 	if (IS_ERR(us))
@ -782,13 +781,6 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 	rndis->port.open = rndis_open;
 	rndis->port.close = rndis_close;

-#ifdef USB_FRNDIS_INCLUDED
-	status = rndis_register(rndis_response_available, rndis);
-	if (status < 0)
-		goto fail;
-	rndis->config = status;
-#endif
-
 	rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0);
 	rndis_set_host_mac(rndis->config, rndis->ethaddr);

@ -830,66 +822,6 @@ fail:
 	return status;
 }

-#ifdef USB_FRNDIS_INCLUDED
-
-static void
-rndis_old_unbind(struct usb_configuration *c, struct usb_function *f)
-{
-	struct f_rndis		*rndis = func_to_rndis(f);
-
-	rndis_deregister(rndis->config);
-
-	usb_free_all_descriptors(f);
-
-	kfree(rndis->notify_req->buf);
-	usb_ep_free_request(rndis->notify, rndis->notify_req);
-
-	kfree(rndis);
-}
-
-int
-rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-		u32 vendorID, const char *manufacturer, struct eth_dev *dev)
-{
-	struct f_rndis	*rndis;
-	int		status;
-
-	/* allocate and initialize one new instance */
-	status = -ENOMEM;
-	rndis = kzalloc(sizeof *rndis, GFP_KERNEL);
-	if (!rndis)
-		goto fail;
-
-	memcpy(rndis->ethaddr, ethaddr, ETH_ALEN);
-	rndis->vendorID = vendorID;
-	rndis->manufacturer = manufacturer;
-
-	rndis->port.ioport = dev;
-	/* RNDIS activates when the host changes this filter */
-	rndis->port.cdc_filter = 0;
-
-	/* RNDIS has special (and complex) framing */
-	rndis->port.header_len = sizeof(struct rndis_packet_msg_type);
-	rndis->port.wrap = rndis_add_header;
-	rndis->port.unwrap = rndis_rm_hdr;
-
-	rndis->port.func.name = "rndis";
-	/* descriptors are per-instance copies */
-	rndis->port.func.bind = rndis_bind;
-	rndis->port.func.unbind = rndis_old_unbind;
-	rndis->port.func.set_alt = rndis_set_alt;
-	rndis->port.func.setup = rndis_setup;
-	rndis->port.func.disable = rndis_disable;
-
-	status = usb_add_function(c, &rndis->port.func);
-	if (status)
-		kfree(rndis);
-fail:
-	return status;
-}
-
-#else
-
 void rndis_borrow_net(struct usb_function_instance *f, struct net_device *net)
 {
 	struct f_rndis_opts *opts;
@ -1047,8 +979,26 @@ static struct usb_function *rndis_alloc(struct usb_function_instance *fi)
 	return &rndis->port.func;
 }

-DECLARE_USB_FUNCTION_INIT(rndis, rndis_alloc_inst, rndis_alloc);
+DECLARE_USB_FUNCTION(rndis, rndis_alloc_inst, rndis_alloc);
+
+static int __init rndis_mod_init(void)
+{
+	int ret;
+
+	ret = rndis_init();
+	if (ret)
+		return ret;
+
+	return usb_function_register(&rndisusb_func);
+}
+module_init(rndis_mod_init);
+
+static void __exit rndis_mod_exit(void)
+{
+	usb_function_unregister(&rndisusb_func);
+	rndis_exit();
+}
+module_exit(rndis_mod_exit);
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Brownell");
-
-#endif
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@ -354,7 +354,7 @@ static void gser_unbind(struct usb_configuration *c, struct usb_function *f)
 	usb_free_all_descriptors(f);
 }

-struct usb_function *gser_alloc(struct usb_function_instance *fi)
+static struct usb_function *gser_alloc(struct usb_function_instance *fi)
 {
 	struct f_gser	*gser;
 	struct f_serial_opts *opts;
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@ -21,6 +21,7 @@

 #include "g_zero.h"
 #include "gadget_chips.h"
+#include "u_f.h"

 /*
 * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
@ -201,7 +202,7 @@ static struct usb_endpoint_descriptor ss_source_desc = {
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };

-struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,

@ -218,7 +219,7 @@ static struct usb_endpoint_descriptor ss_sink_desc = {
 	.wMaxPacketSize =	cpu_to_le16(1024),
 };

-struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,

@ -236,7 +237,7 @@ static struct usb_endpoint_descriptor ss_iso_source_desc = {
 	.bInterval =		4,
 };

-struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,

@ -254,7 +255,7 @@ static struct usb_endpoint_descriptor ss_iso_sink_desc = {
 	.bInterval =		4,
 };

-struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = {
+static struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,

@ -301,23 +302,9 @@ static struct usb_gadget_strings *sourcesink_strings[] = {

 /*-------------------------------------------------------------------------*/

-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len)
+static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len)
 {
-	struct usb_request      *req;
-
-	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
-	if (req) {
-		if (len)
-			req->length = len;
-		else
-			req->length = buflen;
-		req->buf = kmalloc(req->length, GFP_ATOMIC);
-		if (!req->buf) {
-			usb_ep_free_request(ep, req);
-			req = NULL;
-		}
-	}
-	return req;
+	return alloc_ep_req(ep, len, buflen);
 }

 void free_ep_req(struct usb_ep *ep, struct usb_request *req)
@ -490,6 +477,14 @@ no_iso:
 static void
 sourcesink_free_func(struct usb_function *f)
 {
+	struct f_ss_opts *opts;
+
+	opts = container_of(f->fi, struct f_ss_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	opts->refcnt--;
+	mutex_unlock(&opts->lock);
+
 	usb_free_all_descriptors(f);
 	kfree(func_to_ss(f));
 }
@ -628,10 +623,10 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
 				break;
 			}
 			ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
-			req = alloc_ep_req(ep, size);
+			req = ss_alloc_ep_req(ep, size);
 		} else {
 			ep = is_in ? ss->in_ep : ss->out_ep;
-			req = alloc_ep_req(ep, 0);
+			req = ss_alloc_ep_req(ep, 0);
 		}

 		if (!req)
@ -878,6 +873,11 @@ static struct usb_function *source_sink_alloc_func(
 		return NULL;

 	ss_opts =  container_of(fi, struct f_ss_opts, func_inst);
+
+	mutex_lock(&ss_opts->lock);
+	ss_opts->refcnt++;
+	mutex_unlock(&ss_opts->lock);
+
 	pattern = ss_opts->pattern;
 	isoc_interval = ss_opts->isoc_interval;
 	isoc_maxpacket = ss_opts->isoc_maxpacket;
@ -898,6 +898,303 @@ static struct usb_function *source_sink_alloc_func(
 	return &ss->function;
 }

+static inline struct f_ss_opts *to_f_ss_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_ss_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_ss_opts);
+CONFIGFS_ATTR_OPS(f_ss_opts);
+
+static void ss_attr_release(struct config_item *item)
+{
+	struct f_ss_opts *ss_opts = to_f_ss_opts(item);
+
+	usb_put_function_instance(&ss_opts->func_inst);
+}
+
+static struct configfs_item_operations ss_item_ops = {
+	.release		= ss_attr_release,
+	.show_attribute		= f_ss_opts_attr_show,
+	.store_attribute	= f_ss_opts_attr_store,
+};
+
+static ssize_t f_ss_opts_pattern_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->pattern);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_pattern_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num != 0 && num != 1 && num != 2) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->pattern = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_pattern =
+	__CONFIGFS_ATTR(pattern, S_IRUGO | S_IWUSR,
+			f_ss_opts_pattern_show,
+			f_ss_opts_pattern_store);
+
+static ssize_t f_ss_opts_isoc_interval_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->isoc_interval);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_interval_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 16) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_interval = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_isoc_interval =
+	__CONFIGFS_ATTR(isoc_interval, S_IRUGO | S_IWUSR,
+			f_ss_opts_isoc_interval_show,
+			f_ss_opts_isoc_interval_store);
+
+static ssize_t f_ss_opts_isoc_maxpacket_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->isoc_maxpacket);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_maxpacket_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u16 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou16(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 1024) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_maxpacket = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_isoc_maxpacket =
+	__CONFIGFS_ATTR(isoc_maxpacket, S_IRUGO | S_IWUSR,
+			f_ss_opts_isoc_maxpacket_show,
+			f_ss_opts_isoc_maxpacket_store);
+
+static ssize_t f_ss_opts_isoc_mult_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->isoc_mult);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_mult_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 2) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_mult = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_isoc_mult =
+	__CONFIGFS_ATTR(isoc_mult, S_IRUGO | S_IWUSR,
+			f_ss_opts_isoc_mult_show,
+			f_ss_opts_isoc_mult_store);
+
+static ssize_t f_ss_opts_isoc_maxburst_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->isoc_maxburst);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_isoc_maxburst_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 15) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->isoc_maxburst = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_isoc_maxburst =
+	__CONFIGFS_ATTR(isoc_maxburst, S_IRUGO | S_IWUSR,
+			f_ss_opts_isoc_maxburst_show,
+			f_ss_opts_isoc_maxburst_store);
+
+static ssize_t f_ss_opts_bulk_buflen_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->bulk_buflen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_bulk_buflen_store(struct f_ss_opts *opts,
+					   const char *page, size_t len)
+{
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->bulk_buflen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_bulk_buflen =
+	__CONFIGFS_ATTR(buflen, S_IRUGO | S_IWUSR,
+			f_ss_opts_bulk_buflen_show,
+			f_ss_opts_bulk_buflen_store);
+
+static struct configfs_attribute *ss_attrs[] = {
+	&f_ss_opts_pattern.attr,
+	&f_ss_opts_isoc_interval.attr,
+	&f_ss_opts_isoc_maxpacket.attr,
+	&f_ss_opts_isoc_mult.attr,
+	&f_ss_opts_isoc_maxburst.attr,
+	&f_ss_opts_bulk_buflen.attr,
+	NULL,
+};
+
+static struct config_item_type ss_func_type = {
+	.ct_item_ops    = &ss_item_ops,
+	.ct_attrs	= ss_attrs,
+	.ct_owner       = THIS_MODULE,
+};
+
 static void source_sink_free_instance(struct usb_function_instance *fi)
 {
 	struct f_ss_opts *ss_opts;
@ -913,7 +1210,15 @@ static struct usb_function_instance *source_sink_alloc_inst(void)
 	ss_opts = kzalloc(sizeof(*ss_opts), GFP_KERNEL);
 	if (!ss_opts)
 		return ERR_PTR(-ENOMEM);
+	mutex_init(&ss_opts->lock);
 	ss_opts->func_inst.free_func_inst = source_sink_free_instance;
+	ss_opts->isoc_interval = GZERO_ISOC_INTERVAL;
+	ss_opts->isoc_maxpacket = GZERO_ISOC_MAXPACKET;
+	ss_opts->bulk_buflen = GZERO_BULK_BUFLEN;
+
+	config_group_init_type_name(&ss_opts->func_inst.group, "",
+				    &ss_func_type);
+
 	return &ss_opts->func_inst;
 }
 DECLARE_USB_FUNCTION(SourceSink, source_sink_alloc_inst,
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@ -301,7 +301,6 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 	int			status;
 	struct usb_ep		*ep;

-#ifndef USB_FSUBSET_INCLUDED
 	struct f_gether_opts	*gether_opts;

 	gether_opts = container_of(f->fi, struct f_gether_opts, func_inst);
@ -322,7 +321,7 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 			return status;
 		gether_opts->bound = true;
 	}
-#endif
+
 	us = usb_gstrings_attach(cdev, geth_strings,
 				 ARRAY_SIZE(geth_string_defs));
 	if (IS_ERR(us))
@ -393,61 +392,6 @@ fail:
 	return status;
 }

-#ifdef USB_FSUBSET_INCLUDED
-
-static void
-geth_old_unbind(struct usb_configuration *c, struct usb_function *f)
-{
-	geth_string_defs[0].id = 0;
-	usb_free_all_descriptors(f);
-	kfree(func_to_geth(f));
-}
-
-/**
- * geth_bind_config - add CDC Subset network link to a configuration
- * @c: the configuration to support the network link
- * @ethaddr: a buffer in which the ethernet address of the host side
- *	side of the link was recorded
- * @dev: eth_dev structure
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gether_setup().  Caller is also responsible
- * for calling @gether_cleanup() before module unload.
- */
-int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-		struct eth_dev *dev)
-{
-	struct f_gether	*geth;
-	int		status;
-
-	/* allocate and initialize one new instance */
-	geth = kzalloc(sizeof *geth, GFP_KERNEL);
-	if (!geth)
-		return -ENOMEM;
-
-	/* export host's Ethernet address in CDC format */
-	snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr);
-	geth_string_defs[1].s = geth->ethaddr;
-
-	geth->port.ioport = dev;
-	geth->port.cdc_filter = DEFAULT_FILTER;
-
-	geth->port.func.name = "cdc_subset";
-	geth->port.func.bind = geth_bind;
-	geth->port.func.unbind = geth_old_unbind;
-	geth->port.func.set_alt = geth_set_alt;
-	geth->port.func.disable = geth_disable;
-
-	status = usb_add_function(c, &geth->port.func);
-	if (status)
-		kfree(geth);
-	return status;
-}
-
-#else
-
 static inline struct f_gether_opts *to_f_gether_opts(struct config_item *item)
 {
 	return container_of(to_config_group(item), struct f_gether_opts,
@ -573,5 +517,3 @@ static struct usb_function *geth_alloc(struct usb_function_instance *fi)
 DECLARE_USB_FUNCTION_INIT(geth, geth_alloc_inst, geth_alloc);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Brownell");
-
-#endif
--- a/drivers/usb/gadget/fotg210-udc.c
+++ b/drivers/usb/gadget/fotg210-udc.c
@ -1157,8 +1157,9 @@ static int fotg210_udc_probe(struct platform_device *pdev)
 		INIT_LIST_HEAD(&ep->queue);
 		ep->ep.name = fotg210_ep_name[i];
 		ep->ep.ops = &fotg210_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
 	}
-	fotg210->ep[0]->ep.maxpacket = 0x40;
+	usb_ep_set_maxpacket_limit(&fotg210->ep[0]->ep, 0x40);
 	fotg210->gadget.ep0 = &fotg210->ep[0]->ep;
 	INIT_LIST_HEAD(&fotg210->gadget.ep0->ep_list);

--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@ -22,7 +22,6 @@

 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@ -2429,7 +2428,7 @@ static int qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)

 	ep->ep.ops = &qe_ep_ops;
 	ep->stopped = 1;
-	ep->ep.maxpacket = (unsigned short) ~0;
+	usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
 	ep->ep.desc = NULL;
 	ep->dir = 0xff;
 	ep->epnum = (u8)pipe_num;
@ -2717,7 +2716,7 @@ MODULE_DEVICE_TABLE(of, qe_udc_match);

 static struct platform_driver udc_driver = {
 	.driver = {
-		.name = (char *)driver_name,
+		.name = driver_name,
 		.owner = THIS_MODULE,
 		.of_match_table = qe_udc_match,
 	},
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@ -2311,7 +2311,7 @@ static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
 	/* for ep0: maxP defined in desc
 	 * for other eps, maxP is set by epautoconfig() called by gadget layer
 	 */
-	ep->ep.maxpacket = (unsigned short) ~0;
+	usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);

 	/* the queue lists any req for this ep */
 	INIT_LIST_HEAD(&ep->queue);
@ -2469,7 +2469,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	 * for other eps, gadget layer called ep_enable with defined desc
 	 */
 	udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
-	udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
+	usb_ep_set_maxpacket_limit(&udc_controller->eps[0].ep,
+				   USB_MAX_CTRL_PAYLOAD);

 	/* setup the udc->eps[] for non-control endpoints and link
 	 * to gadget.ep_list */
@ -2666,7 +2667,7 @@ static struct platform_driver udc_driver = {
 	.suspend	= fsl_udc_suspend,
 	.resume		= fsl_udc_resume,
 	.driver		= {
-			.name = (char *)driver_name,
+			.name = driver_name,
 			.owner = THIS_MODULE,
 			/* udc suspend/resume called from OTG driver */
 			.suspend = fsl_udc_otg_suspend,
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@ -1452,9 +1452,9 @@ static int __init fusb300_probe(struct platform_device *pdev)
 		INIT_LIST_HEAD(&ep->queue);
 		ep->ep.name = fusb300_ep_name[i];
 		ep->ep.ops = &fusb300_ep_ops;
-		ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE;
+		usb_ep_set_maxpacket_limit(&ep->ep, HS_BULK_MAX_PACKET_SIZE);
 	}
-	fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE;
+	usb_ep_set_maxpacket_limit(&fusb300->ep[0]->ep, HS_CTL_MAX_PACKET_SIZE);
 	fusb300->ep[0]->epnum = 0;
 	fusb300->gadget.ep0 = &fusb300->ep[0]->ep;
 	INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list);
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@ -13,14 +13,10 @@
 #define pr_fmt(fmt) "g_ffs: " fmt

 #include <linux/module.h>
-/*
- * kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
+
 #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+#include <linux/netdevice.h>
+
 #  if defined USB_ETH_RNDIS
 #    undef USB_ETH_RNDIS
 #  endif
@ -28,31 +24,31 @@
 #    define USB_ETH_RNDIS y
 #  endif

-#define USBF_ECM_INCLUDED
-#  include "f_ecm.c"
-#define USB_FSUBSET_INCLUDED
-#  include "f_subset.c"
+#  include "u_ecm.h"
+#  include "u_gether.h"
 #  ifdef USB_ETH_RNDIS
-#    define USB_FRNDIS_INCLUDED
-#    include "f_rndis.c"
+#    include "u_rndis.h"
 #    include "rndis.h"
 #  endif
 #  include "u_ether.h"

-static u8 gfs_host_mac[ETH_ALEN];
-static struct eth_dev *the_dev;
+USB_ETHERNET_MODULE_PARAMETERS();
+
 #  ifdef CONFIG_USB_FUNCTIONFS_ETH
-static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-		struct eth_dev *dev);
+static int eth_bind_config(struct usb_configuration *c);
+static struct usb_function_instance *fi_ecm;
+static struct usb_function *f_ecm;
+static struct usb_function_instance *fi_geth;
+static struct usb_function *f_geth;
+#  endif
+#  ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+static int bind_rndis_config(struct usb_configuration *c);
+static struct usb_function_instance *fi_rndis;
+static struct usb_function *f_rndis;
 #  endif
-#else
-#  define the_dev	NULL
-#  define gether_cleanup(dev) do { } while (0)
-#  define gfs_host_mac NULL
-struct eth_dev;
 #endif

-#include "f_fs.c"
+#include "u_fs.h"

 #define DRIVER_NAME	"g_ffs"
 #define DRIVER_DESC	"USB Function Filesystem"
@ -67,19 +63,8 @@ MODULE_LICENSE("GPL");

 #define GFS_MAX_DEVS	10

-struct gfs_ffs_obj {
-	const char *name;
-	bool mounted;
-	bool desc_ready;
-	struct ffs_data *ffs_data;
-};
-
 USB_GADGET_COMPOSITE_OPTIONS();

-#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
-USB_ETHERNET_MODULE_PARAMETERS();
-#endif
-
 static struct usb_device_descriptor gfs_dev_desc = {
 	.bLength		= sizeof gfs_dev_desc,
 	.bDescriptorType	= USB_DT_DEVICE,
@ -146,12 +131,12 @@ static struct usb_gadget_strings *gfs_dev_strings[] = {

 struct gfs_configuration {
 	struct usb_configuration c;
-	int (*eth)(struct usb_configuration *c, u8 *ethaddr,
-			struct eth_dev *dev);
+	int (*eth)(struct usb_configuration *c);
+	int num;
 } gfs_configurations[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{
-		.eth		= rndis_bind_config,
+		.eth		= bind_rndis_config,
 	},
 #endif

@ -167,10 +152,15 @@ struct gfs_configuration {
 #endif
 };

+static void *functionfs_acquire_dev(struct ffs_dev *dev);
+static void functionfs_release_dev(struct ffs_dev *dev);
+static int functionfs_ready_callback(struct ffs_data *ffs);
+static void functionfs_closed_callback(struct ffs_data *ffs);
 static int gfs_bind(struct usb_composite_dev *cdev);
 static int gfs_unbind(struct usb_composite_dev *cdev);
 static int gfs_do_config(struct usb_configuration *c);

+
 static __refdata struct usb_composite_driver gfs_driver = {
 	.name		= DRIVER_NAME,
 	.dev		= &gfs_dev_desc,
@ -180,206 +170,244 @@ static __refdata struct usb_composite_driver gfs_driver = {
 	.unbind		= gfs_unbind,
 };

-static DEFINE_MUTEX(gfs_lock);
 static unsigned int missing_funcs;
-static bool gfs_ether_setup;
 static bool gfs_registered;
 static bool gfs_single_func;
-static struct gfs_ffs_obj *ffs_tab;
+static struct usb_function_instance **fi_ffs;
+static struct usb_function **f_ffs[] = {
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	NULL,
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	NULL,
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	NULL,
+#endif
+};
+
+#define N_CONF ARRAY_SIZE(f_ffs)

 static int __init gfs_init(void)
 {
+	struct f_fs_opts *opts;
 	int i;
+	int ret = 0;

 	ENTER();

-	if (!func_num) {
+	if (func_num < 2) {
 		gfs_single_func = true;
 		func_num = 1;
 	}

-	ffs_tab = kcalloc(func_num, sizeof *ffs_tab, GFP_KERNEL);
-	if (!ffs_tab)
-		return -ENOMEM;
+	/*
+	 * Allocate in one chunk for easier maintenance
+	 */
+	f_ffs[0] = kcalloc(func_num * N_CONF, sizeof(*f_ffs), GFP_KERNEL);
+	if (!f_ffs[0]) {
+		ret = -ENOMEM;
+		goto no_func;
+	}
+	for (i = 1; i < N_CONF; ++i)
+		f_ffs[i] = f_ffs[0] + i * func_num;

-	if (!gfs_single_func)
-		for (i = 0; i < func_num; i++)
-			ffs_tab[i].name = func_names[i];
+	fi_ffs = kcalloc(func_num, sizeof(*fi_ffs), GFP_KERNEL);
+	if (!fi_ffs) {
+		ret = -ENOMEM;
+		goto no_func;
+	}
+
+	for (i = 0; i < func_num; i++) {
+		fi_ffs[i] = usb_get_function_instance("ffs");
+		if (IS_ERR(fi_ffs[i])) {
+			ret = PTR_ERR(fi_ffs[i]);
+			--i;
+			goto no_dev;
+		}
+		opts = to_f_fs_opts(fi_ffs[i]);
+		if (gfs_single_func)
+			ret = ffs_single_dev(opts->dev);
+		else
+			ret = ffs_name_dev(opts->dev, func_names[i]);
+		if (ret)
+			goto no_dev;
+		opts->dev->ffs_ready_callback = functionfs_ready_callback;
+		opts->dev->ffs_closed_callback = functionfs_closed_callback;
+		opts->dev->ffs_acquire_dev_callback = functionfs_acquire_dev;
+		opts->dev->ffs_release_dev_callback = functionfs_release_dev;
+		opts->no_configfs = true;
+	}

 	missing_funcs = func_num;

-	return functionfs_init();
+	return 0;
+no_dev:
+	while (i >= 0)
+		usb_put_function_instance(fi_ffs[i--]);
+	kfree(fi_ffs);
+no_func:
+	kfree(f_ffs[0]);
+	return ret;
 }
 module_init(gfs_init);

 static void __exit gfs_exit(void)
 {
+	int i;
+
 	ENTER();
-	mutex_lock(&gfs_lock);

 	if (gfs_registered)
 		usb_composite_unregister(&gfs_driver);
 	gfs_registered = false;

-	functionfs_cleanup();
+	kfree(f_ffs[0]);

-	mutex_unlock(&gfs_lock);
-	kfree(ffs_tab);
+	for (i = 0; i < func_num; i++)
+		usb_put_function_instance(fi_ffs[i]);
+
+	kfree(fi_ffs);
 }
 module_exit(gfs_exit);

-static struct gfs_ffs_obj *gfs_find_dev(const char *dev_name)
+static void *functionfs_acquire_dev(struct ffs_dev *dev)
 {
-	int i;
+	if (!try_module_get(THIS_MODULE))
+		return ERR_PTR(-ENODEV);
 	
-	ENTER();
-
-	if (gfs_single_func)
-		return &ffs_tab[0];
-
-	for (i = 0; i < func_num; i++)
-		if (strcmp(ffs_tab[i].name, dev_name) == 0)
-			return &ffs_tab[i];
-
-	return NULL;
+	return 0;
 }

+static void functionfs_release_dev(struct ffs_dev *dev)
+{
+	module_put(THIS_MODULE);
+}
+
+/*
+ * The caller of this function takes ffs_lock 
+ */
 static int functionfs_ready_callback(struct ffs_data *ffs)
 {
-	struct gfs_ffs_obj *ffs_obj;
-	int ret;
+	int ret = 0;

-	ENTER();
-	mutex_lock(&gfs_lock);
+	if (--missing_funcs)
+		return 0;

-	ffs_obj = ffs->private_data;
-	if (!ffs_obj) {
-		ret = -EINVAL;
-		goto done;
-	}
+	if (gfs_registered)
+		return -EBUSY;

-	if (WARN_ON(ffs_obj->desc_ready)) {
-		ret = -EBUSY;
-		goto done;
-	}
-	ffs_obj->desc_ready = true;
-	ffs_obj->ffs_data = ffs;
-
-	if (--missing_funcs) {
-		ret = 0;
-		goto done;
-	}
-
-	if (gfs_registered) {
-		ret = -EBUSY;
-		goto done;
-	}
 	gfs_registered = true;

 	ret = usb_composite_probe(&gfs_driver);
 	if (unlikely(ret < 0))
 		gfs_registered = false;
 	
-done:
-	mutex_unlock(&gfs_lock);
 	return ret;
 }

+/*
+ * The caller of this function takes ffs_lock 
+ */
 static void functionfs_closed_callback(struct ffs_data *ffs)
 {
-	struct gfs_ffs_obj *ffs_obj;
-
-	ENTER();
-	mutex_lock(&gfs_lock);
-
-	ffs_obj = ffs->private_data;
-	if (!ffs_obj)
-		goto done;
-
-	ffs_obj->desc_ready = false;
 	missing_funcs++;

 	if (gfs_registered)
 		usb_composite_unregister(&gfs_driver);
 	gfs_registered = false;
-
-done:
-	mutex_unlock(&gfs_lock);
-}
-
-static void *functionfs_acquire_dev_callback(const char *dev_name)
-{
-	struct gfs_ffs_obj *ffs_dev;
-
-	ENTER();
-	mutex_lock(&gfs_lock);
-
-	ffs_dev = gfs_find_dev(dev_name);
-	if (!ffs_dev) {
-		ffs_dev = ERR_PTR(-ENODEV);
-		goto done;
-	}
-
-	if (ffs_dev->mounted) {
-		ffs_dev = ERR_PTR(-EBUSY);
-		goto done;
-	}
-	ffs_dev->mounted = true;
-
-done:
-	mutex_unlock(&gfs_lock);
-	return ffs_dev;
-}
-
-static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
-{
-	struct gfs_ffs_obj *ffs_dev;
-
-	ENTER();
-	mutex_lock(&gfs_lock);
-
-	ffs_dev = ffs_data->private_data;
-	if (ffs_dev)
-		ffs_dev->mounted = false;
-
-	mutex_unlock(&gfs_lock);
 }

 /*
- * It is assumed that gfs_bind is called from a context where gfs_lock is held
+ * It is assumed that gfs_bind is called from a context where ffs_lock is held
 */
 static int gfs_bind(struct usb_composite_dev *cdev)
 {
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+	struct net_device *net;
+#endif
 	int ret, i;

 	ENTER();

 	if (missing_funcs)
 		return -ENODEV;
-#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
-	the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, gfs_host_mac,
-			       qmult);
-#endif
-	if (IS_ERR(the_dev)) {
-		ret = PTR_ERR(the_dev);
-		goto error_quick;
-	}
-	gfs_ether_setup = true;
+#if defined CONFIG_USB_FUNCTIONFS_ETH
+	if (can_support_ecm(cdev->gadget)) {
+		struct f_ecm_opts *ecm_opts;

+		fi_ecm = usb_get_function_instance("ecm");
+		if (IS_ERR(fi_ecm))
+			return PTR_ERR(fi_ecm);
+		ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+		net = ecm_opts->net;
+	} else {
+		struct f_gether_opts *geth_opts;
+
+		fi_geth = usb_get_function_instance("geth");
+		if (IS_ERR(fi_geth))
+			return PTR_ERR(fi_geth);
+		geth_opts = container_of(fi_geth, struct f_gether_opts,
+					 func_inst);
+		net = geth_opts->net;
+	}
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	{
+		struct f_rndis_opts *rndis_opts;
+
+		fi_rndis = usb_get_function_instance("rndis");
+		if (IS_ERR(fi_rndis)) {
+			ret = PTR_ERR(fi_rndis);
+			goto error;
+		}
+		rndis_opts = container_of(fi_rndis, struct f_rndis_opts,
+					  func_inst);
+#ifndef CONFIG_USB_FUNCTIONFS_ETH
+		net = rndis_opts->net;
+#endif
+	}
+#endif
+
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+	gether_set_qmult(net, qmult);
+	if (!gether_set_host_addr(net, host_addr))
+		pr_info("using host ethernet address: %s", host_addr);
+	if (!gether_set_dev_addr(net, dev_addr))
+		pr_info("using self ethernet address: %s", dev_addr);
+#endif
+
+#if defined CONFIG_USB_FUNCTIONFS_RNDIS && defined CONFIG_USB_FUNCTIONFS_ETH
+	gether_set_gadget(net, cdev->gadget);
+	ret = gether_register_netdev(net);
+	if (ret)
+		goto error_rndis;
+
+	if (can_support_ecm(cdev->gadget)) {
+		struct f_ecm_opts *ecm_opts;
+
+		ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
+		ecm_opts->bound = true;
+	} else {
+		struct f_gether_opts *geth_opts;
+
+		geth_opts = container_of(fi_geth, struct f_gether_opts,
+					 func_inst);
+		geth_opts->bound = true;
+	}
+
+	rndis_borrow_net(fi_rndis, net);
+#endif
+
+	/* TODO: gstrings_attach? */
 	ret = usb_string_ids_tab(cdev, gfs_strings);
 	if (unlikely(ret < 0))
-		goto error;
+		goto error_rndis;
 	gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;

-	for (i = func_num; i--; ) {
-		ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
-		if (unlikely(ret < 0)) {
-			while (++i < func_num)
-				functionfs_unbind(ffs_tab[i].ffs_data);
-			goto error;
-		}
-	}
-
 	for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
 		struct gfs_configuration *c = gfs_configurations + i;
 		int sid = USB_GADGET_FIRST_AVAIL_IDX + i;
@ -389,6 +417,8 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 		c->c.bConfigurationValue	= 1 + i;
 		c->c.bmAttributes		= USB_CONFIG_ATT_SELFPOWER;

+		c->num = i;
+
 		ret = usb_add_config(cdev, &c->c, gfs_do_config);
 		if (unlikely(ret < 0))
 			goto error_unbind;
@ -396,18 +426,24 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	return 0;

+/* TODO */
 error_unbind:
-	for (i = 0; i < func_num; i++)
-		functionfs_unbind(ffs_tab[i].ffs_data);
+error_rndis:
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	usb_put_function_instance(fi_rndis);
 error:
-	gether_cleanup(the_dev);
-error_quick:
-	gfs_ether_setup = false;
+#endif
+#if defined CONFIG_USB_FUNCTIONFS_ETH
+	if (can_support_ecm(cdev->gadget))
+		usb_put_function_instance(fi_ecm);
+	else
+		usb_put_function_instance(fi_geth);
+#endif
 	return ret;
 }

 /*
- * It is assumed that gfs_unbind is called from a context where gfs_lock is held
+ * It is assumed that gfs_unbind is called from a context where ffs_lock is held
 */
 static int gfs_unbind(struct usb_composite_dev *cdev)
 {
@ -415,28 +451,30 @@ static int gfs_unbind(struct usb_composite_dev *cdev)

 	ENTER();

-	/*
-	 * We may have been called in an error recovery from
-	 * composite_bind() after gfs_unbind() failure so we need to
-	 * check if gfs_ffs_data is not NULL since gfs_bind() handles
-	 * all error recovery itself.  I'd rather we werent called
-	 * from composite on orror recovery, but what you're gonna
-	 * do...?
-	 */
-	if (gfs_ether_setup)
-		gether_cleanup(the_dev);
-	gfs_ether_setup = false;

-	for (i = func_num; i--; )
-		if (ffs_tab[i].ffs_data)
-			functionfs_unbind(ffs_tab[i].ffs_data);
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	usb_put_function(f_rndis);
+	usb_put_function_instance(fi_rndis);
+#endif
+
+#if defined CONFIG_USB_FUNCTIONFS_ETH
+	if (can_support_ecm(cdev->gadget)) {
+		usb_put_function(f_ecm);
+		usb_put_function_instance(fi_ecm);
+	} else {
+		usb_put_function(f_geth);
+		usb_put_function_instance(fi_geth);
+	}
+#endif
+	for (i = 0; i < N_CONF * func_num; ++i)
+		usb_put_function(*(f_ffs[0] + i));

 	return 0;
 }

 /*
 * It is assumed that gfs_do_config is called from a context where
- * gfs_lock is held
+ * ffs_lock is held
 */
 static int gfs_do_config(struct usb_configuration *c)
 {
@ -454,15 +492,22 @@ static int gfs_do_config(struct usb_configuration *c)
 	}

 	if (gc->eth) {
-		ret = gc->eth(c, gfs_host_mac, the_dev);
+		ret = gc->eth(c);
 		if (unlikely(ret < 0))
 			return ret;
 	}

 	for (i = 0; i < func_num; i++) {
-		ret = functionfs_bind_config(c->cdev, c, ffs_tab[i].ffs_data);
-		if (unlikely(ret < 0))
-			return ret;
+		f_ffs[gc->num][i] = usb_get_function(fi_ffs[i]);
+		if (IS_ERR(f_ffs[gc->num][i])) {
+			ret = PTR_ERR(f_ffs[gc->num][i]);
+			goto error;
+		}
+		ret = usb_add_function(c, f_ffs[gc->num][i]);
+		if (ret < 0) {
+			usb_put_function(f_ffs[gc->num][i]);
+			goto error;
+		}
 	}

 	/*
@ -479,16 +524,59 @@ static int gfs_do_config(struct usb_configuration *c)
 		c->interface[c->next_interface_id] = NULL;

 	return 0;
+error:
+	while (--i >= 0) {
+		if (!IS_ERR(f_ffs[gc->num][i]))
+			usb_remove_function(c, f_ffs[gc->num][i]);
+		usb_put_function(f_ffs[gc->num][i]);
+	}
+	return ret;
 }

 #ifdef CONFIG_USB_FUNCTIONFS_ETH

-static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
-		struct eth_dev *dev)
+static int eth_bind_config(struct usb_configuration *c)
 {
-	return can_support_ecm(c->cdev->gadget)
-		? ecm_bind_config(c, ethaddr, dev)
-		: geth_bind_config(c, ethaddr, dev);
+	int status = 0;
+
+	if (can_support_ecm(c->cdev->gadget)) {
+		f_ecm = usb_get_function(fi_ecm);
+		if (IS_ERR(f_ecm))
+			return PTR_ERR(f_ecm);
+
+		status = usb_add_function(c, f_ecm);
+		if (status < 0)
+			usb_put_function(f_ecm);
+
+	} else {
+		f_geth = usb_get_function(fi_geth);
+		if (IS_ERR(f_geth))
+			return PTR_ERR(f_geth);
+
+		status = usb_add_function(c, f_geth);
+		if (status < 0)
+			usb_put_function(f_geth);
+	}
+	return status;
+}
+
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+
+static int bind_rndis_config(struct usb_configuration *c)
+{
+	int status = 0;
+
+	f_rndis = usb_get_function(fi_rndis);
+	if (IS_ERR(f_rndis))
+		return PTR_ERR(f_rndis);
+
+	status = usb_add_function(c, f_rndis);
+	if (status < 0)
+		usb_put_function(f_rndis);
+
+	return status;
 }

 #endif
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@ -6,6 +6,11 @@
 #ifndef __G_ZERO_H
 #define __G_ZERO_H

+#define GZERO_BULK_BUFLEN	4096
+#define GZERO_QLEN		32
+#define GZERO_ISOC_INTERVAL	4
+#define GZERO_ISOC_MAXPACKET	1024
+
 struct usb_zero_options {
 	unsigned pattern;
 	unsigned isoc_interval;
@ -24,19 +29,36 @@ struct f_ss_opts {
 	unsigned isoc_mult;
 	unsigned isoc_maxburst;
 	unsigned bulk_buflen;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
 };

 struct f_lb_opts {
 	struct usb_function_instance func_inst;
 	unsigned bulk_buflen;
 	unsigned qlen;
+
+	/*
+	 * Read/write access to configfs attributes is handled by configfs.
+	 *
+	 * This is to protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink.
+	 */
+	struct mutex			lock;
+	int				refcnt;
 };

 void lb_modexit(void);
 int lb_modinit(void);

 /* common utilities */
-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len);
 void free_ep_req(struct usb_ep *ep, struct usb_request *req);
 void disable_endpoints(struct usb_composite_dev *cdev,
 		struct usb_ep *in, struct usb_ep *out,
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@ -30,7 +30,6 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
@ -231,7 +230,7 @@ static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
 		}
 	}

-	ep->ep.maxpacket = MAX_FIFO_SIZE;
+	usb_ep_set_maxpacket_limit(&ep->ep, MAX_FIFO_SIZE);
 	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	ep->irqs = 0;
@ -1251,7 +1250,7 @@ static void udc_reinit (struct goku_udc *dev)
 	}

 	dev->ep[0].reg_mode = NULL;
-	dev->ep[0].ep.maxpacket = MAX_EP0_SIZE;
+	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, MAX_EP0_SIZE);
 	list_del_init (&dev->ep[0].ep.ep_list);
 }

@ -1350,16 +1349,12 @@ static int goku_udc_start(struct usb_gadget *g,
 	return 0;
 }

-static void
-stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
+static void stop_activity(struct goku_udc *dev)
 {
 	unsigned	i;

 	DBG (dev, "%s\n", __func__);

-	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
-
 	/* disconnect gadget driver after quiesceing hw and the driver */
 	udc_reset (dev);
 	for (i = 0; i < 4; i++)
@ -1377,7 +1372,7 @@ static int goku_udc_stop(struct usb_gadget *g,

 	spin_lock_irqsave(&dev->lock, flags);
 	dev->driver = NULL;
-	stop_activity(dev, driver);
+	stop_activity(dev);
 	spin_unlock_irqrestore(&dev->lock, flags);

 	return 0;
@ -1521,7 +1516,7 @@ rescan:
 	if (unlikely(stat & INT_DEVWIDE)) {
 		if (stat & INT_SYSERROR) {
 			ERROR(dev, "system error\n");
-			stop_activity(dev, dev->driver);
+			stop_activity(dev);
 			stat = 0;
 			handled = 1;
 			// FIXME have a neater way to prevent re-enumeration
@ -1536,7 +1531,7 @@ rescan:
 			} else {
 				DBG(dev, "disconnect\n");
 				if (dev->gadget.speed == USB_SPEED_FULL)
-					stop_activity(dev, dev->driver);
+					stop_activity(dev);
 				dev->ep0state = EP0_DISCONNECT;
 				dev->int_enable = INT_DEVWIDE;
 				writel(dev->int_enable, &dev->regs->int_enable);
--- a/drivers/usb/gadget/gr_udc.c
+++ b/drivers/usb/gadget/gr_udc.c
--- a/drivers/usb/gadget/gr_udc.h
+++ b/drivers/usb/gadget/gr_udc.h
@ -0,0 +1,220 @@
+/*
+ * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
+ *
+ * 2013 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports GRUSBDC USB Device Controller cores available in the
+ * GRLIB VHDL IP core library.
+ *
+ * Full documentation of the GRUSBDC core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Contributors:
+ * - Andreas Larsson <andreas@gaisler.com>
+ * - Marko Isomaki
+ */
+
+/* Control registers on the AMBA bus */
+
+#define GR_MAXEP	16	/* Max # endpoints for *each* direction */
+
+struct gr_epregs {
+	u32 epctrl;
+	union {
+		struct { /* Slave mode*/
+			u32 slvctrl;
+			u32 slvdata;
+		};
+		struct { /* DMA mode*/
+			u32 dmactrl;
+			u32 dmaaddr;
+		};
+	};
+	u32 epstat;
+};
+
+struct gr_regs {
+	struct gr_epregs	epo[GR_MAXEP];	/* 0x000 - 0x0fc */
+	struct gr_epregs	epi[GR_MAXEP];	/* 0x100 - 0x1fc */
+	u32			control;	/* 0x200 */
+	u32			status;		/* 0x204 */
+};
+
+#define GR_EPCTRL_BUFSZ_SCALER	8
+#define GR_EPCTRL_BUFSZ_MASK	0xffe00000
+#define GR_EPCTRL_BUFSZ_POS	21
+#define GR_EPCTRL_PI		BIT(20)
+#define GR_EPCTRL_CB		BIT(19)
+#define GR_EPCTRL_CS		BIT(18)
+#define GR_EPCTRL_MAXPL_MASK	0x0003ff80
+#define GR_EPCTRL_MAXPL_POS	7
+#define GR_EPCTRL_NT_MASK	0x00000060
+#define GR_EPCTRL_NT_POS	5
+#define GR_EPCTRL_TT_MASK	0x00000018
+#define GR_EPCTRL_TT_POS	3
+#define GR_EPCTRL_EH		BIT(2)
+#define GR_EPCTRL_ED		BIT(1)
+#define GR_EPCTRL_EV		BIT(0)
+
+#define GR_DMACTRL_AE		BIT(10)
+#define GR_DMACTRL_AD		BIT(3)
+#define GR_DMACTRL_AI		BIT(2)
+#define GR_DMACTRL_IE		BIT(1)
+#define GR_DMACTRL_DA		BIT(0)
+
+#define GR_EPSTAT_PT		BIT(29)
+#define GR_EPSTAT_PR		BIT(29)
+#define GR_EPSTAT_B1CNT_MASK	0x1fff0000
+#define GR_EPSTAT_B1CNT_POS	16
+#define GR_EPSTAT_B0CNT_MASK	0x0000fff8
+#define GR_EPSTAT_B0CNT_POS	3
+#define GR_EPSTAT_B1		BIT(2)
+#define GR_EPSTAT_B0		BIT(1)
+#define GR_EPSTAT_BS		BIT(0)
+
+#define GR_CONTROL_SI		BIT(31)
+#define GR_CONTROL_UI		BIT(30)
+#define GR_CONTROL_VI		BIT(29)
+#define GR_CONTROL_SP		BIT(28)
+#define GR_CONTROL_FI		BIT(27)
+#define GR_CONTROL_EP		BIT(14)
+#define GR_CONTROL_DH		BIT(13)
+#define GR_CONTROL_RW		BIT(12)
+#define GR_CONTROL_TS_MASK	0x00000e00
+#define GR_CONTROL_TS_POS	9
+#define GR_CONTROL_TM		BIT(8)
+#define GR_CONTROL_UA_MASK	0x000000fe
+#define GR_CONTROL_UA_POS	1
+#define GR_CONTROL_SU		BIT(0)
+
+#define GR_STATUS_NEPI_MASK	0xf0000000
+#define GR_STATUS_NEPI_POS	28
+#define GR_STATUS_NEPO_MASK	0x0f000000
+#define GR_STATUS_NEPO_POS	24
+#define GR_STATUS_DM		BIT(23)
+#define GR_STATUS_SU		BIT(17)
+#define GR_STATUS_UR		BIT(16)
+#define GR_STATUS_VB		BIT(15)
+#define GR_STATUS_SP		BIT(14)
+#define GR_STATUS_AF_MASK	0x00003800
+#define GR_STATUS_AF_POS	11
+#define GR_STATUS_FN_MASK	0x000007ff
+#define GR_STATUS_FN_POS	0
+
+
+#define MAX_CTRL_PL_SIZE 64 /* As per USB standard for full and high speed */
+
+/*-------------------------------------------------------------------------*/
+
+/* Driver data structures and utilities */
+
+struct gr_dma_desc {
+	u32 ctrl;
+	u32 data;
+	u32 next;
+
+	/* These must be last because hw uses the previous three */
+	u32 paddr;
+	struct gr_dma_desc *next_desc;
+};
+
+#define GR_DESC_OUT_CTRL_SE		BIT(17)
+#define GR_DESC_OUT_CTRL_IE		BIT(15)
+#define GR_DESC_OUT_CTRL_NX		BIT(14)
+#define GR_DESC_OUT_CTRL_EN		BIT(13)
+#define GR_DESC_OUT_CTRL_LEN_MASK	0x00001fff
+
+#define GR_DESC_IN_CTRL_MO		BIT(18)
+#define GR_DESC_IN_CTRL_PI		BIT(17)
+#define GR_DESC_IN_CTRL_ML		BIT(16)
+#define GR_DESC_IN_CTRL_IE		BIT(15)
+#define GR_DESC_IN_CTRL_NX		BIT(14)
+#define GR_DESC_IN_CTRL_EN		BIT(13)
+#define GR_DESC_IN_CTRL_LEN_MASK	0x00001fff
+
+#define GR_DESC_DMAADDR_MASK		0xfffffffc
+
+struct gr_ep {
+	struct usb_ep ep;
+	struct gr_udc *dev;
+	u16 bytes_per_buffer;
+	unsigned int dma_start;
+	struct gr_epregs __iomem *regs;
+
+	unsigned num:8;
+	unsigned is_in:1;
+	unsigned stopped:1;
+	unsigned wedged:1;
+	unsigned callback:1;
+
+	/* analogous to a host-side qh */
+	struct list_head queue;
+
+	struct list_head ep_list;
+};
+
+struct gr_request {
+	struct usb_request req;
+	struct list_head queue;
+
+	/* Chain of dma descriptors */
+	struct gr_dma_desc *first_desc; /* First in the chain */
+	struct gr_dma_desc *curr_desc; /* Current descriptor */
+	struct gr_dma_desc *last_desc; /* Last in the chain */
+
+	u8 setup; /* Setup packet */
+};
+
+enum gr_ep0state {
+	GR_EP0_DISCONNECT = 0,	/* No host */
+	GR_EP0_SETUP,		/* Between STATUS ack and SETUP report */
+	GR_EP0_IDATA,		/* IN data stage */
+	GR_EP0_ODATA,		/* OUT data stage */
+	GR_EP0_ISTATUS,		/* Status stage after IN data stage */
+	GR_EP0_OSTATUS,		/* Status stage after OUT data stage */
+	GR_EP0_STALL,		/* Data or status stages */
+	GR_EP0_SUSPEND,		/* USB suspend */
+};
+
+struct gr_udc {
+	struct usb_gadget gadget;
+	struct gr_ep epi[GR_MAXEP];
+	struct gr_ep epo[GR_MAXEP];
+	struct usb_gadget_driver *driver;
+	struct dma_pool *desc_pool;
+	struct device *dev;
+
+	enum gr_ep0state ep0state;
+	struct gr_request *ep0reqo;
+	struct gr_request *ep0reqi;
+
+	struct gr_regs __iomem *regs;
+	int irq;
+	int irqi;
+	int irqo;
+
+	unsigned added:1;
+	unsigned irq_enabled:1;
+	unsigned remote_wakeup:1;
+
+	u8 test_mode;
+
+	enum usb_device_state suspended_from;
+
+	unsigned int nepi;
+	unsigned int nepo;
+
+	struct list_head ep_list;
+
+	spinlock_t lock; /* General lock, a.k.a. "dev->lock" in comments */
+
+	struct dentry *dfs_root;
+	struct dentry *dfs_state;
+};
+
+#define to_gr_udc(gadget)	(container_of((gadget), struct gr_udc, gadget))
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@ -1449,7 +1449,7 @@ static void udc_reinit(struct lpc32xx_udc *udc)

 		if (i != 0)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-		ep->ep.maxpacket = ep->maxpacket;
+		usb_ep_set_maxpacket_limit(&ep->ep, ep->maxpacket);
 		INIT_LIST_HEAD(&ep->queue);
 		ep->req_pending = 0;
 	}
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@ -1647,9 +1647,9 @@ static int __init m66592_probe(struct platform_device *pdev)
 		INIT_LIST_HEAD(&ep->queue);
 		ep->ep.name = m66592_ep_name[i];
 		ep->ep.ops = &m66592_ep_ops;
-		ep->ep.maxpacket = 512;
+		usb_ep_set_maxpacket_limit(&ep->ep, 512);
 	}
-	m66592->ep[0].ep.maxpacket = 64;
+	usb_ep_set_maxpacket_limit(&m66592->ep[0].ep, 64);
 	m66592->ep[0].pipenum = 0;
 	m66592->ep[0].fifoaddr = M66592_CFIFO;
 	m66592->ep[0].fifosel = M66592_CFIFOSEL;
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@ -134,7 +134,7 @@ static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
 */
 #define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS

-#endif /* CONFIG_USB_DEBUG */
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */

 FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);

--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@ -15,7 +15,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/notifier.h>
@ -1336,7 +1335,7 @@ static int mv_u3d_eps_init(struct mv_u3d *u3d)
 	ep->ep.name = ep->name;
 	ep->ep.ops = &mv_u3d_ep_ops;
 	ep->wedge = 0;
-	ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE;
+	usb_ep_set_maxpacket_limit(&ep->ep, MV_U3D_EP0_MAX_PKT_SIZE);
 	ep->ep_num = 0;
 	ep->ep.desc = &mv_u3d_ep0_desc;
 	INIT_LIST_HEAD(&ep->queue);
@ -1361,7 +1360,7 @@ static int mv_u3d_eps_init(struct mv_u3d *u3d)
 		ep->ep.name = ep->name;

 		ep->ep.ops = &mv_u3d_ep_ops;
-		ep->ep.maxpacket = (unsigned short) ~0;
+		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
 		ep->ep_num = i / 2;

 		INIT_LIST_HEAD(&ep->queue);
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@ -20,7 +20,6 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
@ -1261,7 +1260,7 @@ static int eps_init(struct mv_udc *udc)
 	ep->ep.ops = &mv_ep_ops;
 	ep->wedge = 0;
 	ep->stopped = 0;
-	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
+	usb_ep_set_maxpacket_limit(&ep->ep, EP0_MAX_PKT_SIZE);
 	ep->ep_num = 0;
 	ep->ep.desc = &mv_ep0_desc;
 	INIT_LIST_HEAD(&ep->queue);
@ -1284,7 +1283,7 @@ static int eps_init(struct mv_udc *udc)

 		ep->ep.ops = &mv_ep_ops;
 		ep->stopped = 0;
-		ep->ep.maxpacket = (unsigned short) ~0;
+		usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
 		ep->ep_num = i / 2;

 		INIT_LIST_HEAD(&ep->queue);
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@ -266,7 +266,7 @@ static void net2272_ep_reset(struct net2272_ep *ep)
 	ep->desc = NULL;
 	INIT_LIST_HEAD(&ep->queue);

-	ep->ep.maxpacket = ~0;
+	usb_ep_set_maxpacket_limit(&ep->ep, ~0);
 	ep->ep.ops = &net2272_ep_ops;

 	/* disable irqs, endpoint */
@ -1409,7 +1409,7 @@ net2272_usb_reinit(struct net2272 *dev)
 			ep->fifo_size = 64;
 		net2272_ep_reset(ep);
 	}
-	dev->ep[0].ep.maxpacket = 64;
+	usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64);

 	dev->gadget.ep0 = &dev->ep[0].ep;
 	dev->ep[0].stopped = 0;
--- a/Показать больше
+++ b/Показать больше