[media] em28xx: add support for PCTV DVB-S2 Stick (461e) [2013:0258]

Device has following chips: Empia EM28178, Montage M88DS3103,
Montage M88TS2022, Allegro A8293.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/usb/em28xx/Kconfig

@@ -49,6 +49,8 @@ config VIDEO_EM28XX_DVB
 	select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
 	---help---
 	  This adds support for DVB cards based on the
 	  Empiatech em28xx chips.

drivers/media/usb/em28xx/em28xx-cards.c

@@ -356,6 +356,28 @@ static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
 	{	-1,			-1,	-1,	-1},
 };
 
+/*
+ * 2013:0258 PCTV DVB-S2 Stick (461e)
+ * GPIO 0 = POWER_ON
+ * GPIO 1 = BOOST
+ * GPIO 2 = VUV_LNB (red LED)
+ * GPIO 3 = #EXT_12V
+ * GPIO 4 = INT_DEM
+ * GPIO 5 = INT_LNB
+ * GPIO 6 = #RESET_DEM
+ * GPIO 7 = P07_LED (green LED)
+ */
+static struct em28xx_reg_seq pctv_461e[] = {
+	{EM2874_R80_GPIO_P0_CTRL,      0x7f, 0xff,    0},
+	{0x0d,                 0xff, 0xff,    0},
+	{EM2874_R80_GPIO_P0_CTRL,      0x3f, 0xff,  100}, /* reset demod */
+	{EM2874_R80_GPIO_P0_CTRL,      0x7f, 0xff,  200}, /* reset demod */
+	{0x0d,                 0x42, 0xff,    0},
+	{EM2874_R80_GPIO_P0_CTRL,      0xeb, 0xff,    0},
+	{EM2874_R5F_TS_ENABLE, 0x84, 0x84,    0}, /* parallel? | null discard */
+	{                  -1,   -1,   -1,   -1},
+};
+
 #if 0
 static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
 	{EM2874_R80_GPIO_P0_CTRL,	0x6f,	0xff,	10},
@@ -2125,6 +2147,17 @@ struct em28xx_board em28xx_boards[] = {
 		.buttons = speedlink_vad_laplace_buttons,
 		.leds = speedlink_vad_laplace_leds,
 	},
+	/* 2013:0258 PCTV DVB-S2 Stick (461e)
+	 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */
+	[EM28178_BOARD_PCTV_461E] = {
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+		.name          = "PCTV DVB-S2 Stick (461e)",
+		.tuner_type    = TUNER_ABSENT,
+		.tuner_gpio    = pctv_461e,
+		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -2294,6 +2327,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
 	{ USB_DEVICE(0x1ae7, 0x9004),
 			.driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
+	{ USB_DEVICE(0x2013, 0x0258),
+			.driver_info = EM28178_BOARD_PCTV_461E },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, em28xx_id_table);

drivers/media/usb/em28xx/em28xx-dvb.c

@@ -51,6 +51,8 @@
 #include "a8293.h"
 #include "qt1010.h"
 #include "mb86a20s.h"
+#include "m88ds3103.h"
+#include "m88ts2022.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -808,6 +810,19 @@ static struct tda18271_config c3tech_duo_tda18271_config = {
 	.small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
 };
 
+static const struct m88ds3103_config pctv_461e_m88ds3103_config = {
+	.i2c_addr = 0x68,
+	.clock = 27000000,
+	.i2c_wr_max = 33,
+	.clock_out = 0,
+	.ts_mode = M88DS3103_TS_PARALLEL_16,
+	.agc = 0x99,
+};
+
+static const struct m88ts2022_config em28xx_m88ts2022_config = {
+	.i2c_addr = 0x60,
+	.clock = 27000000,
+};
 
 /* ------------------------------------------------------------------ */
 
@@ -1330,6 +1345,44 @@ static int em28xx_dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM28178_BOARD_PCTV_461E:
+		{
+			/* demod I2C adapter */
+			struct i2c_adapter *i2c_adapter;
+
+			/* attach demod */
+			dvb->fe[0] = dvb_attach(m88ds3103_attach,
+					&pctv_461e_m88ds3103_config,
+					&dev->i2c_adap[dev->def_i2c_bus],
+					&i2c_adapter);
+			if (dvb->fe[0] == NULL) {
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			/* attach tuner */
+			if (!dvb_attach(m88ts2022_attach, dvb->fe[0],
+					i2c_adapter,
+					&em28xx_m88ts2022_config)) {
+				dvb_frontend_detach(dvb->fe[0]);
+				result = -ENODEV;
+				goto out_free;
+			}
+
+			/* delegate signal strength measurement to tuner */
+			dvb->fe[0]->ops.read_signal_strength =
+					dvb->fe[0]->ops.tuner_ops.get_rf_strength;
+
+			/* attach SEC */
+			if (!dvb_attach(a8293_attach, dvb->fe[0],
+					&dev->i2c_adap[dev->def_i2c_bus],
+					&em28xx_a8293_config)) {
+				dvb_frontend_detach(dvb->fe[0]);
+				result = -ENODEV;
+				goto out_free;
+			}
+		}
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");

drivers/media/usb/em28xx/em28xx.h

@@ -133,6 +133,7 @@
 #define EM2874_BOARD_DELOCK_61959		  89
 #define EM2874_BOARD_KWORLD_UB435Q_V2		  90
 #define EM2765_BOARD_SPEEDLINK_VAD_LAPLACE	  91
+#define EM28178_BOARD_PCTV_461E                   92
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4