[PATCH] ppc32: Add VIA IDE support to MPC8555 CDS platform
Add support for the VIA IDE controller that exists on the MPC8555 CDS system. Updated the config for the system to enable support by default. Signed-off-by: Scott Hall <shall@mvista.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Kumar Gala
Linus Torvalds
Родитель
252fcaed48
Коммит
ed36959621
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.11-rc1
|
||||
# Thu Jan 20 01:25:35 2005
|
||||
# Linux kernel version: 2.6.12-rc4
|
||||
# Tue May 17 11:56:01 2005
|
||||
#
|
||||
CONFIG_MMU=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
|
|
@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y
|
|||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
|
|
@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y
|
|||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
|
|
@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y
|
|||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
|
|
@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0
|
|||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
|
|
@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0
|
|||
CONFIG_E500=y
|
||||
CONFIG_BOOKE=y
|
||||
CONFIG_FSL_BOOKE=y
|
||||
# CONFIG_PHYS_64BIT is not set
|
||||
CONFIG_SPE=y
|
||||
CONFIG_MATH_EMULATION=y
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
CONFIG_PPC_GEN550=y
|
||||
# CONFIG_PM is not set
|
||||
CONFIG_85xx=y
|
||||
CONFIG_PPC_INDIRECT_PCI_BE=y
|
||||
|
||||
|
|
@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y
|
|||
CONFIG_MPC8555_CDS=y
|
||||
# CONFIG_MPC8560_ADS is not set
|
||||
# CONFIG_SBC8560 is not set
|
||||
# CONFIG_STX_GP3 is not set
|
||||
CONFIG_MPC8555=y
|
||||
CONFIG_85xx_PCI2=y
|
||||
|
||||
|
|
@ -90,6 +98,7 @@ CONFIG_CPM2=y
|
|||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
# Bus options
|
||||
|
|
@ -104,10 +113,6 @@ CONFIG_PCI_NAMES=y
|
|||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# PC-card bridges
|
||||
#
|
||||
|
||||
#
|
||||
# Advanced setup
|
||||
#
|
||||
|
|
@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y
|
|||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
CONFIG_IDE=y
|
||||
CONFIG_BLK_DEV_IDE=y
|
||||
|
||||
#
|
||||
# Please see Documentation/ide.txt for help/info on IDE drives
|
||||
#
|
||||
# CONFIG_BLK_DEV_IDE_SATA is not set
|
||||
CONFIG_BLK_DEV_IDEDISK=y
|
||||
# CONFIG_IDEDISK_MULTI_MODE is not set
|
||||
# CONFIG_BLK_DEV_IDECD is not set
|
||||
# CONFIG_BLK_DEV_IDETAPE is not set
|
||||
# CONFIG_BLK_DEV_IDEFLOPPY is not set
|
||||
# CONFIG_IDE_TASK_IOCTL is not set
|
||||
|
||||
#
|
||||
# IDE chipset support/bugfixes
|
||||
#
|
||||
CONFIG_IDE_GENERIC=y
|
||||
CONFIG_BLK_DEV_IDEPCI=y
|
||||
CONFIG_IDEPCI_SHARE_IRQ=y
|
||||
# CONFIG_BLK_DEV_OFFBOARD is not set
|
||||
CONFIG_BLK_DEV_GENERIC=y
|
||||
# CONFIG_BLK_DEV_OPTI621 is not set
|
||||
# CONFIG_BLK_DEV_SL82C105 is not set
|
||||
CONFIG_BLK_DEV_IDEDMA_PCI=y
|
||||
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
|
||||
CONFIG_IDEDMA_PCI_AUTO=y
|
||||
# CONFIG_IDEDMA_ONLYDISK is not set
|
||||
# CONFIG_BLK_DEV_AEC62XX is not set
|
||||
# CONFIG_BLK_DEV_ALI15X3 is not set
|
||||
# CONFIG_BLK_DEV_AMD74XX is not set
|
||||
# CONFIG_BLK_DEV_CMD64X is not set
|
||||
# CONFIG_BLK_DEV_TRIFLEX is not set
|
||||
# CONFIG_BLK_DEV_CY82C693 is not set
|
||||
# CONFIG_BLK_DEV_CS5520 is not set
|
||||
# CONFIG_BLK_DEV_CS5530 is not set
|
||||
# CONFIG_BLK_DEV_HPT34X is not set
|
||||
# CONFIG_BLK_DEV_HPT366 is not set
|
||||
# CONFIG_BLK_DEV_SC1200 is not set
|
||||
# CONFIG_BLK_DEV_PIIX is not set
|
||||
# CONFIG_BLK_DEV_NS87415 is not set
|
||||
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
|
||||
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
|
||||
# CONFIG_BLK_DEV_SVWKS is not set
|
||||
# CONFIG_BLK_DEV_SIIMAGE is not set
|
||||
# CONFIG_BLK_DEV_SLC90E66 is not set
|
||||
# CONFIG_BLK_DEV_TRM290 is not set
|
||||
CONFIG_BLK_DEV_VIA82CXXX=y
|
||||
# CONFIG_IDE_ARM is not set
|
||||
CONFIG_BLK_DEV_IDEDMA=y
|
||||
# CONFIG_IDEDMA_IVB is not set
|
||||
CONFIG_IDEDMA_AUTO=y
|
||||
# CONFIG_BLK_DEV_HD is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
|
|
@ -220,7 +277,6 @@ CONFIG_NET=y
|
|||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
# CONFIG_NETLINK_DEV is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
|
|
@ -369,14 +425,6 @@ CONFIG_INPUT=y
|
|||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input I/O drivers
|
||||
#
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
|
|
@ -386,6 +434,13 @@ CONFIG_SOUND_GAMEPORT=y
|
|||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
|
|
@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
|
|||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_CPM is not set
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
|
@ -433,6 +489,11 @@ CONFIG_GEN_RTC=y
|
|||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
|
|
@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y
|
|||
# CONFIG_I2C_AMD8111 is not set
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
# CONFIG_I2C_ISA is not set
|
||||
CONFIG_I2C_MPC=y
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_SCx200_ACB is not set
|
||||
|
|
@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y
|
|||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM63 is not set
|
||||
# CONFIG_SENSORS_LM75 is not set
|
||||
|
|
@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y
|
|||
# CONFIG_SENSORS_LM85 is not set
|
||||
# CONFIG_SENSORS_LM87 is not set
|
||||
# CONFIG_SENSORS_LM90 is not set
|
||||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_SIS5595 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_VIA686A is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
|
|
@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y
|
|||
#
|
||||
# Other I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_RTC8564 is not set
|
||||
# CONFIG_SENSORS_M41T00 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
|
|
@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y
|
|||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
|
|
@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y
|
|||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB is not set
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
|
|
@ -585,6 +647,10 @@ CONFIG_JBD=y
|
|||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
|
|
@ -646,7 +712,6 @@ CONFIG_NFS_FS=y
|
|||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
# CONFIG_EXPORTFS is not set
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
|
|
@ -698,7 +763,9 @@ CONFIG_CRC32=y
|
|||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_KGDB_CONSOLE is not set
|
||||
# CONFIG_SERIAL_TEXT_DEBUG is not set
|
||||
|
||||
|
|
|
|||
|
|
@ -44,6 +44,7 @@
|
|||
#include <asm/machdep.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/open_pic.h>
|
||||
#include <asm/i8259.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <asm/mpc85xx.h>
|
||||
|
|
@ -181,6 +182,7 @@ void __init
|
|||
mpc85xx_cds_init_IRQ(void)
|
||||
{
|
||||
bd_t *binfo = (bd_t *) __res;
|
||||
int i;
|
||||
|
||||
/* Determine the Physical Address of the OpenPIC regs */
|
||||
phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
|
||||
|
|
@ -198,6 +200,13 @@ mpc85xx_cds_init_IRQ(void)
|
|||
*/
|
||||
openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
|
||||
|
||||
openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
|
||||
|
||||
for (i = 0; i < NUM_8259_INTERRUPTS; i++)
|
||||
irq_desc[i].handler = &i8259_pic;
|
||||
|
||||
i8259_init(0);
|
||||
|
||||
#ifdef CONFIG_CPM2
|
||||
/* Setup CPM2 PIC */
|
||||
cpm2_init_IRQ();
|
||||
|
|
@ -231,7 +240,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|||
* interrupt on slot */
|
||||
{
|
||||
{ 0, 1, 2, 3 }, /* 16 - PMC */
|
||||
{ 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */
|
||||
{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
|
||||
{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
|
||||
{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
|
||||
{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
|
||||
|
|
@ -280,13 +289,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
|
|||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
#endif
|
||||
/* We explicitly do not go past the Tundra 320 Bridge */
|
||||
if (bus == 1)
|
||||
if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
else
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
void __init
|
||||
mpc85xx_cds_enable_via(struct pci_controller *hose)
|
||||
{
|
||||
u32 pci_class;
|
||||
u16 vid, did;
|
||||
|
||||
early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
|
||||
if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
|
||||
return;
|
||||
|
||||
/* Configure P2P so that we can reach bus 1 */
|
||||
early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
|
||||
early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
|
||||
early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
|
||||
|
||||
early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
|
||||
early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
|
||||
|
||||
if ((vid != PCI_VENDOR_ID_VIA) ||
|
||||
(did != PCI_DEVICE_ID_VIA_82C686))
|
||||
return;
|
||||
|
||||
/* Enable USB and IDE functions */
|
||||
early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
|
||||
}
|
||||
|
||||
void __init
|
||||
mpc85xx_cds_fixup_via(struct pci_controller *hose)
|
||||
{
|
||||
u32 pci_class;
|
||||
u16 vid, did;
|
||||
|
||||
early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
|
||||
if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
|
||||
return;
|
||||
|
||||
/*
|
||||
* Force the backplane P2P bridge to have a window
|
||||
* open from 0x00000000-0x00001fff in PCI I/O space.
|
||||
* This allows legacy I/O (i8259, etc) on the VIA
|
||||
* southbridge to be accessed.
|
||||
*/
|
||||
early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
|
||||
early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
|
||||
early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
|
||||
early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
|
||||
|
||||
early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
|
||||
early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
|
||||
if ((vid != PCI_VENDOR_ID_VIA) ||
|
||||
(did != PCI_DEVICE_ID_VIA_82C686))
|
||||
return;
|
||||
|
||||
/*
|
||||
* Since the P2P window was forced to cover the fixed
|
||||
* legacy I/O addresses, it is necessary to manually
|
||||
* place the base addresses for the IDE and USB functions
|
||||
* within this window.
|
||||
*/
|
||||
/* Function 1, IDE */
|
||||
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
|
||||
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
|
||||
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
|
||||
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
|
||||
early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
|
||||
|
||||
/* Function 2, USB ports 0-1 */
|
||||
early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
|
||||
|
||||
/* Function 3, USB ports 2-3 */
|
||||
early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
|
||||
|
||||
/* Function 5, Power Management */
|
||||
early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
|
||||
early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
|
||||
early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
|
||||
|
||||
/* Function 6, AC97 Interface */
|
||||
early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
|
||||
}
|
||||
|
||||
void __init
|
||||
mpc85xx_cds_pcibios_fixup(void)
|
||||
{
|
||||
struct pci_dev *dev = NULL;
|
||||
u_char c;
|
||||
|
||||
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
|
||||
PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
|
||||
/*
|
||||
* U-Boot does not set the enable bits
|
||||
* for the IDE device. Force them on here.
|
||||
*/
|
||||
pci_read_config_byte(dev, 0x40, &c);
|
||||
c |= 0x03; /* IDE: Chip Enable Bits */
|
||||
pci_write_config_byte(dev, 0x40, c);
|
||||
|
||||
/*
|
||||
* Since only primary interface works, force the
|
||||
* IDE function to standard primary IDE interrupt
|
||||
* w/ 8259 offset
|
||||
*/
|
||||
dev->irq = 14;
|
||||
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
||||
}
|
||||
|
||||
/*
|
||||
* Force legacy USB interrupt routing
|
||||
*/
|
||||
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
|
||||
PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
|
||||
dev->irq = 10;
|
||||
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
|
||||
}
|
||||
|
||||
if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
|
||||
PCI_DEVICE_ID_VIA_82C586_2, dev))) {
|
||||
dev->irq = 11;
|
||||
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
|
||||
}
|
||||
}
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
TODC_ALLOC();
|
||||
|
|
@ -308,6 +439,9 @@ mpc85xx_cds_setup_arch(void)
|
|||
|
||||
printk("mpc85xx_cds_setup_arch\n");
|
||||
|
||||
/* VIA IDE configuration */
|
||||
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
|
||||
|
||||
#ifdef CONFIG_CPM2
|
||||
cpm2_reset();
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -77,4 +77,7 @@
|
|||
|
||||
#define MPC85XX_PCI2_IO_SIZE 0x01000000
|
||||
|
||||
#define NR_8259_INTS 16
|
||||
#define CPM_IRQ_OFFSET NR_8259_INTS
|
||||
|
||||
#endif /* __MACH_MPC85XX_CDS_H__ */
|
||||
|
|
|
|||
|
|
@ -97,7 +97,7 @@ obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o
|
|||
obj-$(CONFIG_40x) += dcr.o
|
||||
obj-$(CONFIG_BOOKE) += dcr.o
|
||||
obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
|
||||
ppc_sys.o mpc85xx_sys.o \
|
||||
ppc_sys.o i8259.o mpc85xx_sys.o \
|
||||
mpc85xx_devices.o
|
||||
ifeq ($(CONFIG_85xx),y)
|
||||
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o
|
||||
|
|
|
|||
|
|
@ -132,6 +132,12 @@ mpc85xx_halt(void)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
|
||||
#if defined(CONFIG_MPC8555_CDS)
|
||||
extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
|
||||
extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
|
||||
#endif
|
||||
|
||||
static void __init
|
||||
mpc85xx_setup_pci1(struct pci_controller *hose)
|
||||
{
|
||||
|
|
@ -302,8 +308,18 @@ mpc85xx_setup_hose(void)
|
|||
|
||||
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
|
||||
|
||||
#if defined(CONFIG_MPC8555_CDS)
|
||||
/* Pre pciauto_bus_scan VIA init */
|
||||
mpc85xx_cds_enable_via(hose_a);
|
||||
#endif
|
||||
|
||||
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
|
||||
|
||||
#if defined(CONFIG_MPC8555_CDS)
|
||||
/* Post pciauto_bus_scan VIA fixup */
|
||||
mpc85xx_cds_fixup_via(hose_a);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_85xx_PCI2
|
||||
hose_b = pcibios_alloc_controller();
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче