PCI: Replace HAVE_ARCH_PCI_MWI with PCI_DISABLE_MWI

pSeries is the only architecture left using HAVE_ARCH_PCI_MWI and it's
really inappropriate for its needs.  It really wants to disable MWI
altogether.  So here are a pair of stub implementations for pci_set_mwi
and pci_clear_mwi.

Also rename pci_generic_prep_mwi to pci_set_cacheline_size since that
better reflects what it does.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Matthew Wilcox 2006-10-10 08:01:21 -06:00 коммит произвёл Greg Kroah-Hartman
Родитель ebf5a24829
Коммит edb2d97eb5
2 изменённых файлов: 25 добавлений и 26 удалений

Просмотреть файл

@ -875,7 +875,17 @@ pci_set_master(struct pci_dev *dev)
pcibios_set_master(dev);
}
#ifndef HAVE_ARCH_PCI_MWI
#ifdef PCI_DISABLE_MWI
int pci_set_mwi(struct pci_dev *dev)
{
return 0;
}
void pci_clear_mwi(struct pci_dev *dev)
{
}
#else
#ifndef PCI_CACHE_LINE_BYTES
#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
@ -886,17 +896,17 @@ pci_set_master(struct pci_dev *dev)
u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
/**
* pci_generic_prep_mwi - helper function for pci_set_mwi
* @dev: the PCI device for which MWI is enabled
* pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
* @dev: the PCI device for which MWI is to be enabled
*
* Helper function for generic implementation of pcibios_prep_mwi
* function. Originally copied from drivers/net/acenic.c.
* Helper function for pci_set_mwi.
* Originally copied from drivers/net/acenic.c.
* Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
pci_generic_prep_mwi(struct pci_dev *dev)
pci_set_cacheline_size(struct pci_dev *dev)
{
u8 cacheline_size;
@ -922,7 +932,6 @@ pci_generic_prep_mwi(struct pci_dev *dev)
return -EINVAL;
}
#endif /* !HAVE_ARCH_PCI_MWI */
/**
* pci_set_mwi - enables memory-write-invalidate PCI transaction
@ -940,12 +949,7 @@ pci_set_mwi(struct pci_dev *dev)
int rc;
u16 cmd;
#ifdef HAVE_ARCH_PCI_MWI
rc = pcibios_prep_mwi(dev);
#else
rc = pci_generic_prep_mwi(dev);
#endif
rc = pci_set_cacheline_size(dev);
if (rc)
return rc;
@ -976,6 +980,7 @@ pci_clear_mwi(struct pci_dev *dev)
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
}
#endif /* ! PCI_DISABLE_MWI */
/**
* pci_intx - enables/disables PCI INTx for device dev

Просмотреть файл

@ -62,19 +62,13 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
}
#ifdef CONFIG_PPC64
#define HAVE_ARCH_PCI_MWI 1
static inline int pcibios_prep_mwi(struct pci_dev *dev)
{
/*
* We would like to avoid touching the cacheline size or MWI bit
* but we cant do that with the current pcibios_prep_mwi
* interface. pSeries firmware sets the cacheline size (which is not
* the cpu cacheline size in all cases) and hardware treats MWI
* the same as memory write. So we dont touch the cacheline size
* here and allow the generic code to set the MWI bit.
*/
return 0;
}
/*
* We want to avoid touching the cacheline size or MWI bit.
* pSeries firmware sets the cacheline size (which is not the cpu cacheline
* size in all cases) and hardware treats MWI the same as memory write.
*/
#define PCI_DISABLE_MWI
extern struct dma_mapping_ops pci_dma_ops;