[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver

HighPoint RocketRAID 3220/3320 series 8 channel PCI-X SATA RAID Host
Adapters.

Fixes from original submission:

Merge Andrew Morton's patches:
- Provide locking for global list
- Fix debug printks
- uninline function with multiple callsites
- coding style fixups
- remove unneeded casts of void*
- kfree(NULL) is legal
- Don't "succeed" if register_chrdev() failed - otherwise we'll later
  unregister a not-registered chrdev.
- Don't return from hptiop_do_ioctl() with the spinlock held.
- uninline __hpt_do_ioctl()

Update for Arjan van de Ven's comments:
- put all asm/ includes after the linux/ ones
- replace mdelay with msleep
- add pci posting flush
- do not set pci command reqister in map_pci_bar
- do not try merging sg elements in hptiop_buildsgl()
- remove unused outstandingcommands member from hba structure
- remove unimplemented hptiop_abort() handler
- remove typedef u32 hpt_id_t

Other updates:
- fix endianess

Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
HighPoint Linux Team 2006-05-16 14:38:09 +08:00 коммит произвёл James Bottomley
Родитель cbd5f69b98
Коммит ede1e6f8b4
6 изменённых файлов: 2075 добавлений и 0 удалений

Просмотреть файл

@ -0,0 +1,92 @@
HIGHPOINT ROCKETRAID 3xxx RAID DRIVER (hptiop)
Controller Register Map
-------------------------
The controller IOP is accessed via PCI BAR0.
BAR0 offset Register
0x10 Inbound Message Register 0
0x14 Inbound Message Register 1
0x18 Outbound Message Register 0
0x1C Outbound Message Register 1
0x20 Inbound Doorbell Register
0x24 Inbound Interrupt Status Register
0x28 Inbound Interrupt Mask Register
0x30 Outbound Interrupt Status Register
0x34 Outbound Interrupt Mask Register
0x40 Inbound Queue Port
0x44 Outbound Queue Port
I/O Request Workflow
----------------------
All queued requests are handled via inbound/outbound queue port.
A request packet can be allocated in either IOP or host memory.
To send a request to the controller:
- Get a free request packet by reading the inbound queue port or
allocate a free request in host DMA coherent memory.
The value returned from the inbound queue port is an offset
relative to the IOP BAR0.
Requests allocated in host memory must be aligned on 32-bytes boundary.
- Fill the packet.
- Post the packet to IOP by writing it to inbound queue. For requests
allocated in IOP memory, write the offset to inbound queue port. For
requests allocated in host memory, write (0x80000000|(bus_addr>>5))
to the inbound queue port.
- The IOP process the request. When the request is completed, it
will be put into outbound queue. An outbound interrupt will be
generated.
For requests allocated in IOP memory, the request offset is posted to
outbound queue.
For requests allocated in host memory, (0x80000000|(bus_addr>>5))
is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
flag is set in the request, the low 32-bit context value will be
posted instead.
- The host read the outbound queue and complete the request.
For requests allocated in IOP memory, the host driver free the request
by writing it to the outbound queue.
Non-queued requests (reset/flush etc) can be sent via inbound message
register 0. An outbound message with the same value indicates the completion
of an inbound message.
User-level Interface
---------------------
The driver exposes following sysfs attributes:
NAME R/W Description
driver-version R driver version string
firmware-version R firmware version string
The driver registers char device "hptiop" to communicate with HighPoint RAID
management software. Its ioctl routine acts as a general binary interface
between the IOP firmware and HighPoint RAID management software. New management
functions can be implemented in application/firmware without modification
in driver code.
-----------------------------------------------------------------------------
Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved.
This file is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
linux@highpoint-tech.com
http://www.highpoint-tech.com

Просмотреть файл

@ -1117,6 +1117,12 @@ L: linux-hams@vger.kernel.org
W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/
S: Maintained
HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
P: HighPoint Linux Team
M: linux@highpoint-tech.com
W: http://www.highpoint-tech.com
S: Supported
HIPPI
P: Jes Sorensen
M: jes@trained-monkey.org

Просмотреть файл

@ -530,6 +530,16 @@ config SCSI_PDC_ADMA
If unsure, say N.
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx Controller support"
depends on SCSI && PCI
help
This option enables support for HighPoint RocketRAID 3xxx
controllers.
To compile this driver as a module, choose M here; the module
will be called hptiop. If unsure, say N.
config SCSI_SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on SCSI_SATA && PCI

Просмотреть файл

@ -136,6 +136,7 @@ obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
obj-$(CONFIG_ARM) += arm/

1501
drivers/scsi/hptiop.c Normal file

Разница между файлами не показана из-за своего большого размера Загрузить разницу

465
drivers/scsi/hptiop.h Normal file
Просмотреть файл

@ -0,0 +1,465 @@
/*
* HighPoint RR3xxx controller driver for Linux
* Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Please report bugs/comments/suggestions to linux@highpoint-tech.com
*
* For more information, visit http://www.highpoint-tech.com
*/
#ifndef _HPTIOP_H_
#define _HPTIOP_H_
/*
* logical device type.
* Identify array (logical device) and physical device.
*/
#define LDT_ARRAY 1
#define LDT_DEVICE 2
/*
* Array types
*/
#define AT_UNKNOWN 0
#define AT_RAID0 1
#define AT_RAID1 2
#define AT_RAID5 3
#define AT_RAID6 4
#define AT_JBOD 7
#define MAX_NAME_LENGTH 36
#define MAX_ARRAYNAME_LEN 16
#define MAX_ARRAY_MEMBERS_V1 8
#define MAX_ARRAY_MEMBERS_V2 16
/* keep definition for source code compatiblity */
#define MAX_ARRAY_MEMBERS MAX_ARRAY_MEMBERS_V1
/*
* array flags
*/
#define ARRAY_FLAG_DISABLED 0x00000001 /* The array is disabled */
#define ARRAY_FLAG_NEEDBUILDING 0x00000002 /* need to be rebuilt */
#define ARRAY_FLAG_REBUILDING 0x00000004 /* in rebuilding process */
#define ARRAY_FLAG_BROKEN 0x00000008 /* broken but still working */
#define ARRAY_FLAG_BOOTDISK 0x00000010 /* has a active partition */
#define ARRAY_FLAG_BOOTMARK 0x00000040 /* array has boot mark set */
#define ARRAY_FLAG_NEED_AUTOREBUILD 0x00000080 /* auto-rebuild should start */
#define ARRAY_FLAG_VERIFYING 0x00000100 /* is being verified */
#define ARRAY_FLAG_INITIALIZING 0x00000200 /* is being initialized */
#define ARRAY_FLAG_TRANSFORMING 0x00000400 /* tranform in progress */
#define ARRAY_FLAG_NEEDTRANSFORM 0x00000800 /* array need tranform */
#define ARRAY_FLAG_NEEDINITIALIZING 0x00001000 /* initialization not done */
#define ARRAY_FLAG_BROKEN_REDUNDANT 0x00002000 /* broken but redundant */
/*
* device flags
*/
#define DEVICE_FLAG_DISABLED 0x00000001 /* device is disabled */
#define DEVICE_FLAG_UNINITIALIZED 0x00010000 /* device is not initialized */
#define DEVICE_FLAG_LEGACY 0x00020000 /* lagacy drive */
#define DEVICE_FLAG_IS_SPARE 0x80000000 /* is a spare disk */
/*
* ioctl codes
*/
#define HPT_CTL_CODE(x) (x+0xFF00)
#define HPT_CTL_CODE_LINUX_TO_IOP(x) ((x)-0xff00)
#define HPT_IOCTL_GET_CONTROLLER_INFO HPT_CTL_CODE(2)
#define HPT_IOCTL_GET_CHANNEL_INFO HPT_CTL_CODE(3)
#define HPT_IOCTL_GET_LOGICAL_DEVICES HPT_CTL_CODE(4)
#define HPT_IOCTL_GET_DRIVER_CAPABILITIES HPT_CTL_CODE(19)
#define HPT_IOCTL_GET_DEVICE_INFO_V3 HPT_CTL_CODE(46)
#define HPT_IOCTL_GET_CONTROLLER_INFO_V2 HPT_CTL_CODE(47)
/*
* Controller information.
*/
struct hpt_controller_info {
u8 chip_type; /* chip type */
u8 interrupt_level; /* IRQ level */
u8 num_buses; /* bus count */
u8 chip_flags;
u8 product_id[MAX_NAME_LENGTH];/* product name */
u8 vendor_id[MAX_NAME_LENGTH]; /* vendor name */
}
__attribute__((packed));
/*
* Channel information.
*/
struct hpt_channel_info {
__le32 io_port; /* IDE Base Port Address */
__le32 control_port; /* IDE Control Port Address */
__le32 devices[2]; /* device connected to this channel */
}
__attribute__((packed));
/*
* Array information.
*/
struct hpt_array_info_v3 {
u8 name[MAX_ARRAYNAME_LEN]; /* array name */
u8 description[64]; /* array description */
u8 create_manager[16]; /* who created it */
__le32 create_time; /* when created it */
u8 array_type; /* array type */
u8 block_size_shift; /* stripe size */
u8 ndisk; /* Number of ID in Members[] */
u8 reserved;
__le32 flags; /* working flags, see ARRAY_FLAG_XXX */
__le32 members[MAX_ARRAY_MEMBERS_V2]; /* member array/disks */
__le32 rebuilding_progress;
__le64 rebuilt_sectors; /* rebuilding point (LBA) for single member */
__le32 transform_source;
__le32 transform_target; /* destination device ID */
__le32 transforming_progress;
__le32 signature; /* persistent identification*/
__le16 critical_members; /* bit mask of critical members */
__le16 reserve2;
__le32 reserve;
}
__attribute__((packed));
/*
* physical device information.
*/
#define MAX_PARENTS_PER_DISK 8
struct hpt_device_info_v2 {
u8 ctlr_id; /* controller id */
u8 path_id; /* bus */
u8 target_id; /* id */
u8 device_mode_setting; /* Current Data Transfer mode: 0-4 PIO0-4 */
/* 5-7 MW DMA0-2, 8-13 UDMA0-5 */
u8 device_type; /* device type */
u8 usable_mode; /* highest usable mode */
#ifdef __BIG_ENDIAN_BITFIELD
u8 NCQ_enabled: 1;
u8 NCQ_supported: 1;
u8 TCQ_enabled: 1;
u8 TCQ_supported: 1;
u8 write_cache_enabled: 1;
u8 write_cache_supported: 1;
u8 read_ahead_enabled: 1;
u8 read_ahead_supported: 1;
u8 reserved6: 6;
u8 spin_up_mode: 2;
#else
u8 read_ahead_supported: 1;
u8 read_ahead_enabled: 1;
u8 write_cache_supported: 1;
u8 write_cache_enabled: 1;
u8 TCQ_supported: 1;
u8 TCQ_enabled: 1;
u8 NCQ_supported: 1;
u8 NCQ_enabled: 1;
u8 spin_up_mode: 2;
u8 reserved6: 6;
#endif
__le32 flags; /* working flags, see DEVICE_FLAG_XXX */
u8 ident[150]; /* (partitial) Identify Data of this device */
__le64 total_free;
__le64 max_free;
__le64 bad_sectors;
__le32 parent_arrays[MAX_PARENTS_PER_DISK];
}
__attribute__((packed));
/*
* Logical device information.
*/
#define INVALID_TARGET_ID 0xFF
#define INVALID_BUS_ID 0xFF
struct hpt_logical_device_info_v3 {
u8 type; /* LDT_ARRAY or LDT_DEVICE */
u8 cache_policy; /* refer to CACHE_POLICY_xxx */
u8 vbus_id; /* vbus sequence in vbus_list */
u8 target_id; /* OS target id. 0xFF is invalid */
/* OS name: DISK $VBusId_$TargetId */
__le64 capacity; /* array capacity */
__le32 parent_array; /* don't use this field for physical
device. use ParentArrays field in
hpt_device_info_v2 */
/* reserved statistic fields */
__le32 stat1;
__le32 stat2;
__le32 stat3;
__le32 stat4;
union {
struct hpt_array_info_v3 array;
struct hpt_device_info_v2 device;
} __attribute__((packed)) u;
}
__attribute__((packed));
/*
* ioctl structure
*/
#define HPT_IOCTL_MAGIC 0xA1B2C3D4
struct hpt_ioctl_u {
u32 magic; /* used to check if it's a valid ioctl packet */
u32 ioctl_code; /* operation control code */
void __user *inbuf; /* input data buffer */
u32 inbuf_size; /* size of input data buffer */
void __user *outbuf; /* output data buffer */
u32 outbuf_size; /* size of output data buffer */
void __user *bytes_returned; /* count of bytes returned */
}
__attribute__((packed));
struct hpt_iopmu
{
__le32 resrved0[4];
__le32 inbound_msgaddr0;
__le32 inbound_msgaddr1;
__le32 outbound_msgaddr0;
__le32 outbound_msgaddr1;
__le32 inbound_doorbell;
__le32 inbound_intstatus;
__le32 inbound_intmask;
__le32 outbound_doorbell;
__le32 outbound_intstatus;
__le32 outbound_intmask;
__le32 reserved1[2];
__le32 inbound_queue;
__le32 outbound_queue;
};
#define IOPMU_QUEUE_EMPTY 0xffffffff
#define IOPMU_QUEUE_MASK_HOST_BITS 0xf0000000
#define IOPMU_QUEUE_ADDR_HOST_BIT 0x80000000
#define IOPMU_OUTBOUND_INT_MSG0 1
#define IOPMU_OUTBOUND_INT_MSG1 2
#define IOPMU_OUTBOUND_INT_DOORBELL 4
#define IOPMU_OUTBOUND_INT_POSTQUEUE 8
#define IOPMU_OUTBOUND_INT_PCI 0x10
#define IOPMU_INBOUND_INT_MSG0 1
#define IOPMU_INBOUND_INT_MSG1 2
#define IOPMU_INBOUND_INT_DOORBELL 4
#define IOPMU_INBOUND_INT_ERROR 8
#define IOPMU_INBOUND_INT_POSTQUEUE 0x10
enum hpt_iopmu_message {
/* host-to-iop messages */
IOPMU_INBOUND_MSG0_NOP = 0,
IOPMU_INBOUND_MSG0_RESET,
IOPMU_INBOUND_MSG0_FLUSH,
IOPMU_INBOUND_MSG0_SHUTDOWN,
IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK,
IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK,
IOPMU_INBOUND_MSG0_MAX = 0xff,
/* iop-to-host messages */
IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100,
IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_MAX = 0x1ff,
IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_0 = 0x200,
IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_MAX = 0x2ff,
IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_0 = 0x300,
IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff,
};
struct hpt_iop_request_header
{
__le32 size;
__le32 type;
__le32 flags;
__le32 result;
__le32 context; /* host context */
__le32 context_hi32;
};
#define IOP_REQUEST_FLAG_SYNC_REQUEST 1
#define IOP_REQUEST_FLAG_BIST_REQUEST 2
#define IOP_REQUEST_FLAG_REMAPPED 4
#define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8
enum hpt_iop_request_type {
IOP_REQUEST_TYPE_GET_CONFIG = 0,
IOP_REQUEST_TYPE_SET_CONFIG,
IOP_REQUEST_TYPE_BLOCK_COMMAND,
IOP_REQUEST_TYPE_SCSI_COMMAND,
IOP_REQUEST_TYPE_IOCTL_COMMAND,
IOP_REQUEST_TYPE_MAX
};
enum hpt_iop_result_type {
IOP_RESULT_PENDING = 0,
IOP_RESULT_SUCCESS,
IOP_RESULT_FAIL,
IOP_RESULT_BUSY,
IOP_RESULT_RESET,
IOP_RESULT_INVALID_REQUEST,
IOP_RESULT_BAD_TARGET,
IOP_RESULT_MODE_SENSE_CHECK_CONDITION,
};
struct hpt_iop_request_get_config
{
struct hpt_iop_request_header header;
__le32 interface_version;
__le32 firmware_version;
__le32 max_requests;
__le32 request_size;
__le32 max_sg_count;
__le32 data_transfer_length;
__le32 alignment_mask;
__le32 max_devices;
__le32 sdram_size;
};
struct hpt_iop_request_set_config
{
struct hpt_iop_request_header header;
__le32 iop_id;
__le32 vbus_id;
__le32 reserve[6];
};
struct hpt_iopsg
{
__le32 size;
__le32 eot; /* non-zero: end of table */
__le64 pci_address;
};
struct hpt_iop_request_block_command
{
struct hpt_iop_request_header header;
u8 channel;
u8 target;
u8 lun;
u8 pad1;
__le16 command; /* IOP_BLOCK_COMMAND_{READ,WRITE} */
__le16 sectors;
__le64 lba;
struct hpt_iopsg sg_list[1];
};
#define IOP_BLOCK_COMMAND_READ 1
#define IOP_BLOCK_COMMAND_WRITE 2
#define IOP_BLOCK_COMMAND_VERIFY 3
#define IOP_BLOCK_COMMAND_FLUSH 4
#define IOP_BLOCK_COMMAND_SHUTDOWN 5
struct hpt_iop_request_scsi_command
{
struct hpt_iop_request_header header;
u8 channel;
u8 target;
u8 lun;
u8 pad1;
u8 cdb[16];
__le32 dataxfer_length;
struct hpt_iopsg sg_list[1];
};
struct hpt_iop_request_ioctl_command
{
struct hpt_iop_request_header header;
__le32 ioctl_code;
__le32 inbuf_size;
__le32 outbuf_size;
__le32 bytes_returned;
u8 buf[1];
/* out data should be put at buf[(inbuf_size+3)&~3] */
};
#define HPTIOP_MAX_REQUESTS 256u
struct hptiop_request {
struct hptiop_request * next;
void * req_virt;
u32 req_shifted_phy;
struct scsi_cmnd * scp;
int index;
};
struct hpt_scsi_pointer {
int mapped;
int sgcnt;
dma_addr_t dma_handle;
};
#define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp)
struct hptiop_hba {
struct hpt_iopmu __iomem * iop;
struct Scsi_Host * host;
struct pci_dev * pcidev;
struct list_head link;
/* IOP config info */
u32 firmware_version;
u32 sdram_size;
u32 max_devices;
u32 max_requests;
u32 max_request_size;
u32 max_sg_descriptors;
u32 req_size; /* host-allocated request buffer size */
int initialized;
int msg_done;
struct hptiop_request * req_list;
struct hptiop_request reqs[HPTIOP_MAX_REQUESTS];
/* used to free allocated dma area */
void * dma_coherent;
dma_addr_t dma_coherent_handle;
atomic_t reset_count;
atomic_t resetting;
wait_queue_head_t reset_wq;
wait_queue_head_t ioctl_wq;
};
struct hpt_ioctl_k
{
struct hptiop_hba * hba;
u32 ioctl_code;
u32 inbuf_size;
u32 outbuf_size;
void * inbuf;
void * outbuf;
u32 * bytes_returned;
void (*done)(struct hpt_ioctl_k *);
int result; /* HPT_IOCTL_RESULT_ */
};
#define HPT_IOCTL_RESULT_OK 0
#define HPT_IOCTL_RESULT_FAILED (-1)
#if 0
#define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0)
#else
#define dprintk(fmt, args...)
#endif
#endif