microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

gianfar: Factor out enabling/disabling of hw interrupts 

Throughout the code there are places where the controller's
hw interrupt sources need to get disabled/enabled (masked/
un-masked) all at once.  The recommendation for disabling
the interrupts is to clear the ievent first then the imask
register (not the other way around).
Use the gfar_ints_enable/disable() helpers to make these
operations consistent.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Claudiu Manoil 2014-02-17 12:53:17 +02:00 коммит произвёл David S. Miller
Родитель 532c37bcb7
Коммит efeddce7ea
1 изменённых файлов: 30 добавлений и 30 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

60
drivers/net/ethernet/freescale/gianfar.c
Просмотреть файл

@ -448,6 +448,29 @@ static const struct net_device_ops gfar_netdev_ops = {
#endif
};
static void gfar_ints_disable(struct gfar_private *priv)
{
int i;
for (i = 0; i < priv->num_grps; i++) {
struct gfar __iomem *regs = priv->gfargrp[i].regs;
/* Clear IEVENT */
gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
/* Initialize IMASK */
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
}
}
static void gfar_ints_enable(struct gfar_private *priv)
{
int i;
for (i = 0; i < priv->num_grps; i++) {
struct gfar __iomem *regs = priv->gfargrp[i].regs;
/* Unmask the interrupts we look for */
gfar_write(&regs->imask, IMASK_DEFAULT);
}
}
void lock_rx_qs(struct gfar_private *priv)
{
int i;
@ -1548,19 +1571,10 @@ static void gfar_configure_serdes(struct net_device *dev)
static void init_registers(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar __iomem *regs = NULL;
int i;
struct gfar __iomem *regs = priv->gfargrp[0].regs;
for (i = 0; i < priv->num_grps; i++) {
regs = priv->gfargrp[i].regs;
/* Clear IEVENT */
gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
gfar_ints_disable(priv);
/* Initialize IMASK */
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
}
regs = priv->gfargrp[0].regs;
/* Init hash registers to zero */
gfar_write(&regs->igaddr0, 0);
gfar_write(&regs->igaddr1, 0);
@ -1622,20 +1636,11 @@ static int __gfar_is_rx_idle(struct gfar_private *priv)
static void gfar_halt_nodisable(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar __iomem *regs = NULL;
struct gfar __iomem *regs = priv->gfargrp[0].regs;
u32 tempval;
int i;
for (i = 0; i < priv->num_grps; i++) {
regs = priv->gfargrp[i].regs;
/* Mask all interrupts */
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
gfar_ints_disable(priv);
/* Clear all interrupts */
gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
}
regs = priv->gfargrp[0].regs;
/* Stop the DMA, and wait for it to stop */
tempval = gfar_read(&regs->dmactrl);
if ((tempval & (DMACTRL_GRS | DMACTRL_GTS)) !=
@ -1823,10 +1828,10 @@ void gfar_start(struct net_device *dev)
/* Clear THLT/RHLT, so that the DMA starts polling now */
gfar_write(&regs->tstat, priv->gfargrp[i].tstat);
gfar_write(&regs->rstat, priv->gfargrp[i].rstat);
/* Unmask the interrupts we look for */
gfar_write(&regs->imask, IMASK_DEFAULT);
}
gfar_ints_enable(priv);
dev->trans_start = jiffies; /* prevent tx timeout */
}
@ -1931,15 +1936,10 @@ err_irq_fail:
int startup_gfar(struct net_device *ndev)
{
struct gfar_private *priv = netdev_priv(ndev);
struct gfar __iomem *regs = NULL;
int err, i, j;
for (i = 0; i < priv->num_grps; i++) {
regs= priv->gfargrp[i].regs;
gfar_write(&regs->imask, IMASK_INIT_CLEAR);
}
gfar_ints_disable(priv);
regs= priv->gfargrp[0].regs;
err = gfar_alloc_skb_resources(ndev);
if (err)
return err;