pci root complex: support for tile architecture
This change enables PCI root complex support for TILEPro. Unlike TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI support consists of hypervisor upcalls for PIO, DMA, etc. However, the performance is fine for the devices we have tested with so far (1Gb Ethernet, SATA, etc.). The <asm/io.h> header was tweaked to be a little bit more aggressive about disabling attempts to map/unmap IO port space. The hacky <asm/pci-bridge.h> header was rolled into the <asm/pci.h> header and the result was simplified. Both of the latter two headers were preliminary versions not meant for release before now - oh well. There is one quirk for our TILEmpower platform, which accidentally negotiates up to 5GT and needs to be kicked down to 2.5GT. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This commit is contained in:
Chris Metcalf
Родитель
e5a0693973
Коммит
f02cbbe657
|
|
@ -329,6 +329,18 @@ endmenu # Tilera-specific configuration
|
||||||
|
|
||||||
menu "Bus options"
|
menu "Bus options"
|
||||||
|
|
||||||
|
config PCI
|
||||||
|
bool "PCI support"
|
||||||
|
default y
|
||||||
|
select PCI_DOMAINS
|
||||||
|
---help---
|
||||||
|
Enable PCI root complex support, so PCIe endpoint devices can
|
||||||
|
be attached to the Tile chip. Many, but not all, PCI devices
|
||||||
|
are supported under Tilera's root complex driver.
|
||||||
|
|
||||||
|
config PCI_DOMAINS
|
||||||
|
bool
|
||||||
|
|
||||||
config NO_IOMEM
|
config NO_IOMEM
|
||||||
def_bool !PCI
|
def_bool !PCI
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
|
||||||
#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
|
#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
|
||||||
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
|
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
|
||||||
|
|
||||||
void __iomem *ioport_map(unsigned long port, unsigned int len);
|
|
||||||
extern inline void ioport_unmap(void __iomem *addr) {}
|
|
||||||
|
|
||||||
#define mmiowb()
|
#define mmiowb()
|
||||||
|
|
||||||
/* Conversion between virtual and physical mappings. */
|
/* Conversion between virtual and physical mappings. */
|
||||||
|
|
@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
|
||||||
* we never run, uses them unconditionally.
|
* we never run, uses them unconditionally.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
static inline int ioport_panic(void)
|
static inline long ioport_panic(void)
|
||||||
{
|
{
|
||||||
panic("inb/outb and friends do not exist on tile");
|
panic("inb/outb and friends do not exist on tile");
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
|
||||||
|
{
|
||||||
|
return (void __iomem *) ioport_panic();
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void ioport_unmap(void __iomem *addr)
|
||||||
|
{
|
||||||
|
ioport_panic();
|
||||||
|
}
|
||||||
|
|
||||||
static inline u8 inb(unsigned long addr)
|
static inline u8 inb(unsigned long addr)
|
||||||
{
|
{
|
||||||
return ioport_panic();
|
return ioport_panic();
|
||||||
|
|
|
||||||
|
|
@ -1,117 +0,0 @@
|
||||||
/*
|
|
||||||
* Copyright 2010 Tilera Corporation. All Rights Reserved.
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License
|
|
||||||
* as published by the Free Software Foundation, version 2.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful, but
|
|
||||||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
||||||
* NON INFRINGEMENT. See the GNU General Public License for
|
|
||||||
* more details.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef _ASM_TILE_PCI_BRIDGE_H
|
|
||||||
#define _ASM_TILE_PCI_BRIDGE_H
|
|
||||||
|
|
||||||
#include <linux/ioport.h>
|
|
||||||
#include <linux/pci.h>
|
|
||||||
|
|
||||||
struct device_node;
|
|
||||||
struct pci_controller;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* pci_io_base returns the memory address at which you can access
|
|
||||||
* the I/O space for PCI bus number `bus' (or NULL on error).
|
|
||||||
*/
|
|
||||||
extern void __iomem *pci_bus_io_base(unsigned int bus);
|
|
||||||
extern unsigned long pci_bus_io_base_phys(unsigned int bus);
|
|
||||||
extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
|
|
||||||
|
|
||||||
/* Allocate a new PCI host bridge structure */
|
|
||||||
extern struct pci_controller *pcibios_alloc_controller(void);
|
|
||||||
|
|
||||||
/* Helper function for setting up resources */
|
|
||||||
extern void pci_init_resource(struct resource *res, unsigned long start,
|
|
||||||
unsigned long end, int flags, char *name);
|
|
||||||
|
|
||||||
/* Get the PCI host controller for a bus */
|
|
||||||
extern struct pci_controller *pci_bus_to_hose(int bus);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Structure of a PCI controller (host bridge)
|
|
||||||
*/
|
|
||||||
struct pci_controller {
|
|
||||||
int index; /* PCI domain number */
|
|
||||||
struct pci_bus *root_bus;
|
|
||||||
|
|
||||||
int first_busno;
|
|
||||||
int last_busno;
|
|
||||||
|
|
||||||
int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
|
|
||||||
int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
|
|
||||||
|
|
||||||
struct pci_ops *ops;
|
|
||||||
|
|
||||||
int irq_base; /* Base IRQ from the Hypervisor */
|
|
||||||
int plx_gen1; /* flag for PLX Gen 1 configuration */
|
|
||||||
|
|
||||||
/* Address ranges that are routed to this controller/bridge. */
|
|
||||||
struct resource mem_resources[3];
|
|
||||||
};
|
|
||||||
|
|
||||||
static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
|
|
||||||
{
|
|
||||||
return bus->sysdata;
|
|
||||||
}
|
|
||||||
|
|
||||||
extern void setup_indirect_pci_nomap(struct pci_controller *hose,
|
|
||||||
void __iomem *cfg_addr, void __iomem *cfg_data);
|
|
||||||
extern void setup_indirect_pci(struct pci_controller *hose,
|
|
||||||
u32 cfg_addr, u32 cfg_data);
|
|
||||||
extern void setup_grackle(struct pci_controller *hose);
|
|
||||||
|
|
||||||
extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* The following code swizzles for exactly one bridge. The routine
|
|
||||||
* common_swizzle below handles multiple bridges. But there are a
|
|
||||||
* some boards that don't follow the PCI spec's suggestion so we
|
|
||||||
* break this piece out separately.
|
|
||||||
*/
|
|
||||||
static inline unsigned char bridge_swizzle(unsigned char pin,
|
|
||||||
unsigned char idsel)
|
|
||||||
{
|
|
||||||
return (((pin-1) + idsel) % 4) + 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* The following macro is used to lookup irqs in a standard table
|
|
||||||
* format for those PPC systems that do not already have PCI
|
|
||||||
* interrupts properly routed.
|
|
||||||
*/
|
|
||||||
/* FIXME - double check this */
|
|
||||||
#define PCI_IRQ_TABLE_LOOKUP ({ \
|
|
||||||
long _ctl_ = -1; \
|
|
||||||
if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
|
|
||||||
_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
|
|
||||||
_ctl_; \
|
|
||||||
})
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Scan the buses below a given PCI host bridge and assign suitable
|
|
||||||
* resources to all devices found.
|
|
||||||
*/
|
|
||||||
extern int pciauto_bus_scan(struct pci_controller *, int);
|
|
||||||
|
|
||||||
#ifdef CONFIG_PCI
|
|
||||||
extern unsigned long pci_address_to_pio(phys_addr_t address);
|
|
||||||
#else
|
|
||||||
static inline unsigned long pci_address_to_pio(phys_addr_t address)
|
|
||||||
{
|
|
||||||
return (unsigned long)-1;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* _ASM_TILE_PCI_BRIDGE_H */
|
|
||||||
|
|
@ -15,7 +15,29 @@
|
||||||
#ifndef _ASM_TILE_PCI_H
|
#ifndef _ASM_TILE_PCI_H
|
||||||
#define _ASM_TILE_PCI_H
|
#define _ASM_TILE_PCI_H
|
||||||
|
|
||||||
#include <asm/pci-bridge.h>
|
#include <linux/pci.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Structure of a PCI controller (host bridge)
|
||||||
|
*/
|
||||||
|
struct pci_controller {
|
||||||
|
int index; /* PCI domain number */
|
||||||
|
struct pci_bus *root_bus;
|
||||||
|
|
||||||
|
int first_busno;
|
||||||
|
int last_busno;
|
||||||
|
|
||||||
|
int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
|
||||||
|
int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
|
||||||
|
|
||||||
|
struct pci_ops *ops;
|
||||||
|
|
||||||
|
int irq_base; /* Base IRQ from the Hypervisor */
|
||||||
|
int plx_gen1; /* flag for PLX Gen 1 configuration */
|
||||||
|
|
||||||
|
/* Address ranges that are routed to this controller/bridge. */
|
||||||
|
struct resource mem_resources[3];
|
||||||
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* The hypervisor maps the entirety of CPA-space as bus addresses, so
|
* The hypervisor maps the entirety of CPA-space as bus addresses, so
|
||||||
|
|
@ -24,57 +46,13 @@
|
||||||
*/
|
*/
|
||||||
#define PCI_DMA_BUS_IS_PHYS 1
|
#define PCI_DMA_BUS_IS_PHYS 1
|
||||||
|
|
||||||
struct pci_controller *pci_bus_to_hose(int bus);
|
|
||||||
unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
|
|
||||||
int __init tile_pci_init(void);
|
int __init tile_pci_init(void);
|
||||||
void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
|
|
||||||
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
|
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
|
||||||
|
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
|
||||||
|
|
||||||
void __devinit pcibios_fixup_bus(struct pci_bus *bus);
|
void __devinit pcibios_fixup_bus(struct pci_bus *bus);
|
||||||
|
|
||||||
int __devinit _tile_cfg_read(struct pci_controller *hose,
|
|
||||||
int bus,
|
|
||||||
int slot,
|
|
||||||
int function,
|
|
||||||
int offset,
|
|
||||||
int size,
|
|
||||||
u32 *val);
|
|
||||||
int __devinit _tile_cfg_write(struct pci_controller *hose,
|
|
||||||
int bus,
|
|
||||||
int slot,
|
|
||||||
int function,
|
|
||||||
int offset,
|
|
||||||
int size,
|
|
||||||
u32 val);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* These are used to to config reads and writes in the early stages of
|
|
||||||
* setup before the driver infrastructure has been set up enough to be
|
|
||||||
* able to do config reads and writes.
|
|
||||||
*/
|
|
||||||
#define early_cfg_read(where, size, value) \
|
|
||||||
_tile_cfg_read(controller, \
|
|
||||||
current_bus, \
|
|
||||||
pci_slot, \
|
|
||||||
pci_fn, \
|
|
||||||
where, \
|
|
||||||
size, \
|
|
||||||
value)
|
|
||||||
|
|
||||||
#define early_cfg_write(where, size, value) \
|
|
||||||
_tile_cfg_write(controller, \
|
|
||||||
current_bus, \
|
|
||||||
pci_slot, \
|
|
||||||
pci_fn, \
|
|
||||||
where, \
|
|
||||||
size, \
|
|
||||||
value)
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#define PCICFG_BYTE 1
|
|
||||||
#define PCICFG_WORD 2
|
|
||||||
#define PCICFG_DWORD 4
|
|
||||||
|
|
||||||
#define TILE_NUM_PCIE 2
|
#define TILE_NUM_PCIE 2
|
||||||
|
|
||||||
#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
|
#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
|
||||||
|
|
@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
|
||||||
}
|
}
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* I/O space is currently not supported.
|
* pcibios_assign_all_busses() tells whether or not the bus numbers
|
||||||
|
* should be reassigned, in case the BIOS didn't do it correctly, or
|
||||||
|
* in case we don't have a BIOS and we want to let Linux do it.
|
||||||
*/
|
*/
|
||||||
|
static inline int pcibios_assign_all_busses(void)
|
||||||
|
{
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
#define TILE_PCIE_LOWER_IO 0x0
|
/*
|
||||||
#define TILE_PCIE_UPPER_IO 0x10000
|
* No special bus mastering setup handling.
|
||||||
#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
|
*/
|
||||||
|
|
||||||
#define _PAGE_NO_CACHE 0
|
|
||||||
#define _PAGE_GUARDED 0
|
|
||||||
|
|
||||||
|
|
||||||
#define pcibios_assign_all_busses() pci_assign_all_buses
|
|
||||||
extern int pci_assign_all_buses;
|
|
||||||
|
|
||||||
static inline void pcibios_set_master(struct pci_dev *dev)
|
static inline void pcibios_set_master(struct pci_dev *dev)
|
||||||
{
|
{
|
||||||
/* No special bus mastering setup handling */
|
|
||||||
}
|
}
|
||||||
|
|
||||||
#define PCIBIOS_MIN_MEM 0
|
#define PCIBIOS_MIN_MEM 0
|
||||||
#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
|
#define PCIBIOS_MIN_IO 0
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* This flag tells if the platform is TILEmpower that needs
|
* This flag tells if the platform is TILEmpower that needs
|
||||||
* special configuration for the PLX switch chip.
|
* special configuration for the PLX switch chip.
|
||||||
*/
|
*/
|
||||||
extern int blade_pci;
|
extern int tile_plx_gen1;
|
||||||
|
|
||||||
|
/* Use any cpu for PCI. */
|
||||||
|
#define cpumask_of_pcibus(bus) cpu_online_mask
|
||||||
|
|
||||||
/* implement the pci_ DMA API in terms of the generic device dma_ one */
|
/* implement the pci_ DMA API in terms of the generic device dma_ one */
|
||||||
#include <asm-generic/pci-dma-compat.h>
|
#include <asm-generic/pci-dma-compat.h>
|
||||||
|
|
@ -122,7 +100,4 @@ extern int blade_pci;
|
||||||
/* generic pci stuff */
|
/* generic pci stuff */
|
||||||
#include <asm-generic/pci.h>
|
#include <asm-generic/pci.h>
|
||||||
|
|
||||||
/* Use any cpu for PCI. */
|
|
||||||
#define cpumask_of_pcibus(bus) cpu_online_mask
|
|
||||||
|
|
||||||
#endif /* _ASM_TILE_PCI_H */
|
#endif /* _ASM_TILE_PCI_H */
|
||||||
|
|
|
||||||
|
|
@ -15,3 +15,4 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
|
||||||
obj-$(CONFIG_MODULES) += module.o
|
obj-$(CONFIG_MODULES) += module.o
|
||||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||||
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
|
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
|
||||||
|
obj-$(CONFIG_PCI) += pci.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,621 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2010 Tilera Corporation. All Rights Reserved.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License
|
||||||
|
* as published by the Free Software Foundation, version 2.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful, but
|
||||||
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
||||||
|
* NON INFRINGEMENT. See the GNU General Public License for
|
||||||
|
* more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/pci.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/string.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/capability.h>
|
||||||
|
#include <linux/sched.h>
|
||||||
|
#include <linux/errno.h>
|
||||||
|
#include <linux/bootmem.h>
|
||||||
|
#include <linux/irq.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
#include <linux/uaccess.h>
|
||||||
|
|
||||||
|
#include <asm/processor.h>
|
||||||
|
#include <asm/sections.h>
|
||||||
|
#include <asm/byteorder.h>
|
||||||
|
#include <asm/hv_driver.h>
|
||||||
|
#include <hv/drv_pcie_rc_intf.h>
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Initialization flow and process
|
||||||
|
* -------------------------------
|
||||||
|
*
|
||||||
|
* This files containes the routines to search for PCI buses,
|
||||||
|
* enumerate the buses, and configure any attached devices.
|
||||||
|
*
|
||||||
|
* There are two entry points here:
|
||||||
|
* 1) tile_pci_init
|
||||||
|
* This sets up the pci_controller structs, and opens the
|
||||||
|
* FDs to the hypervisor. This is called from setup_arch() early
|
||||||
|
* in the boot process.
|
||||||
|
* 2) pcibios_init
|
||||||
|
* This probes the PCI bus(es) for any attached hardware. It's
|
||||||
|
* called by subsys_initcall. All of the real work is done by the
|
||||||
|
* generic Linux PCI layer.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This flag tells if the platform is TILEmpower that needs
|
||||||
|
* special configuration for the PLX switch chip.
|
||||||
|
*/
|
||||||
|
int __write_once tile_plx_gen1;
|
||||||
|
|
||||||
|
static struct pci_controller controllers[TILE_NUM_PCIE];
|
||||||
|
static int num_controllers;
|
||||||
|
|
||||||
|
static struct pci_ops tile_cfg_ops;
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* We don't need to worry about the alignment of resources.
|
||||||
|
*/
|
||||||
|
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
|
||||||
|
resource_size_t size, resource_size_t align)
|
||||||
|
{
|
||||||
|
return res->start;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(pcibios_align_resource);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Open a FD to the hypervisor PCI device.
|
||||||
|
*
|
||||||
|
* controller_id is the controller number, config type is 0 or 1 for
|
||||||
|
* config0 or config1 operations.
|
||||||
|
*/
|
||||||
|
static int __init tile_pcie_open(int controller_id, int config_type)
|
||||||
|
{
|
||||||
|
char filename[32];
|
||||||
|
int fd;
|
||||||
|
|
||||||
|
sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
|
||||||
|
|
||||||
|
fd = hv_dev_open((HV_VirtAddr)filename, 0);
|
||||||
|
|
||||||
|
return fd;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Get the IRQ numbers from the HV and set up the handlers for them.
|
||||||
|
*/
|
||||||
|
static int __init tile_init_irqs(int controller_id,
|
||||||
|
struct pci_controller *controller)
|
||||||
|
{
|
||||||
|
char filename[32];
|
||||||
|
int fd;
|
||||||
|
int ret;
|
||||||
|
int x;
|
||||||
|
struct pcie_rc_config rc_config;
|
||||||
|
|
||||||
|
sprintf(filename, "pcie/%d/ctl", controller_id);
|
||||||
|
fd = hv_dev_open((HV_VirtAddr)filename, 0);
|
||||||
|
if (fd < 0) {
|
||||||
|
pr_err("PCI: hv_dev_open(%s) failed\n", filename);
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
|
||||||
|
sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
|
||||||
|
hv_dev_close(fd);
|
||||||
|
if (ret != sizeof(rc_config)) {
|
||||||
|
pr_err("PCI: wanted %zd bytes, got %d\n",
|
||||||
|
sizeof(rc_config), ret);
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
/* Record irq_base so that we can map INTx to IRQ # later. */
|
||||||
|
controller->irq_base = rc_config.intr;
|
||||||
|
|
||||||
|
for (x = 0; x < 4; x++)
|
||||||
|
tile_irq_activate(rc_config.intr + x,
|
||||||
|
TILE_IRQ_HW_CLEAR);
|
||||||
|
|
||||||
|
if (rc_config.plx_gen1)
|
||||||
|
controller->plx_gen1 = 1;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* First initialization entry point, called from setup_arch().
|
||||||
|
*
|
||||||
|
* Find valid controllers and fill in pci_controller structs for each
|
||||||
|
* of them.
|
||||||
|
*
|
||||||
|
* Returns the number of controllers discovered.
|
||||||
|
*/
|
||||||
|
int __init tile_pci_init(void)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
pr_info("PCI: Searching for controllers...\n");
|
||||||
|
|
||||||
|
/* Do any configuration we need before using the PCIe */
|
||||||
|
|
||||||
|
for (i = 0; i < TILE_NUM_PCIE; i++) {
|
||||||
|
int hv_cfg_fd0 = -1;
|
||||||
|
int hv_cfg_fd1 = -1;
|
||||||
|
int hv_mem_fd = -1;
|
||||||
|
char name[32];
|
||||||
|
struct pci_controller *controller;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Open the fd to the HV. If it fails then this
|
||||||
|
* device doesn't exist.
|
||||||
|
*/
|
||||||
|
hv_cfg_fd0 = tile_pcie_open(i, 0);
|
||||||
|
if (hv_cfg_fd0 < 0)
|
||||||
|
continue;
|
||||||
|
hv_cfg_fd1 = tile_pcie_open(i, 1);
|
||||||
|
if (hv_cfg_fd1 < 0) {
|
||||||
|
pr_err("PCI: Couldn't open config fd to HV "
|
||||||
|
"for controller %d\n", i);
|
||||||
|
goto err_cont;
|
||||||
|
}
|
||||||
|
|
||||||
|
sprintf(name, "pcie/%d/mem", i);
|
||||||
|
hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
|
||||||
|
if (hv_mem_fd < 0) {
|
||||||
|
pr_err("PCI: Could not open mem fd to HV!\n");
|
||||||
|
goto err_cont;
|
||||||
|
}
|
||||||
|
|
||||||
|
pr_info("PCI: Found PCI controller #%d\n", i);
|
||||||
|
|
||||||
|
controller = &controllers[num_controllers];
|
||||||
|
|
||||||
|
if (tile_init_irqs(i, controller)) {
|
||||||
|
pr_err("PCI: Could not initialize "
|
||||||
|
"IRQs, aborting.\n");
|
||||||
|
goto err_cont;
|
||||||
|
}
|
||||||
|
|
||||||
|
controller->index = num_controllers;
|
||||||
|
controller->hv_cfg_fd[0] = hv_cfg_fd0;
|
||||||
|
controller->hv_cfg_fd[1] = hv_cfg_fd1;
|
||||||
|
controller->hv_mem_fd = hv_mem_fd;
|
||||||
|
controller->first_busno = 0;
|
||||||
|
controller->last_busno = 0xff;
|
||||||
|
controller->ops = &tile_cfg_ops;
|
||||||
|
|
||||||
|
num_controllers++;
|
||||||
|
continue;
|
||||||
|
|
||||||
|
err_cont:
|
||||||
|
if (hv_cfg_fd0 >= 0)
|
||||||
|
hv_dev_close(hv_cfg_fd0);
|
||||||
|
if (hv_cfg_fd1 >= 0)
|
||||||
|
hv_dev_close(hv_cfg_fd1);
|
||||||
|
if (hv_mem_fd >= 0)
|
||||||
|
hv_dev_close(hv_mem_fd);
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Before using the PCIe, see if we need to do any platform-specific
|
||||||
|
* configuration, such as the PLX switch Gen 1 issue on TILEmpower.
|
||||||
|
*/
|
||||||
|
for (i = 0; i < num_controllers; i++) {
|
||||||
|
struct pci_controller *controller = &controllers[i];
|
||||||
|
|
||||||
|
if (controller->plx_gen1)
|
||||||
|
tile_plx_gen1 = 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
return num_controllers;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* (pin - 1) converts from the PCI standard's [1:4] convention to
|
||||||
|
* a normal [0:3] range.
|
||||||
|
*/
|
||||||
|
static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||||
|
{
|
||||||
|
struct pci_controller *controller =
|
||||||
|
(struct pci_controller *)dev->sysdata;
|
||||||
|
return (pin - 1) + controller->irq_base;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static void __init fixup_read_and_payload_sizes(void)
|
||||||
|
{
|
||||||
|
struct pci_dev *dev = NULL;
|
||||||
|
int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
|
||||||
|
int max_read_size = 0x2; /* Limit to 512 byte reads. */
|
||||||
|
u16 new_values;
|
||||||
|
|
||||||
|
/* Scan for the smallest maximum payload size. */
|
||||||
|
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
|
||||||
|
int pcie_caps_offset;
|
||||||
|
u32 devcap;
|
||||||
|
int max_payload;
|
||||||
|
|
||||||
|
pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
||||||
|
if (pcie_caps_offset == 0)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
|
||||||
|
&devcap);
|
||||||
|
max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
|
||||||
|
if (max_payload < smallest_max_payload)
|
||||||
|
smallest_max_payload = max_payload;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Now, set the max_payload_size for all devices to that value. */
|
||||||
|
new_values = (max_read_size << 12) | (smallest_max_payload << 5);
|
||||||
|
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
|
||||||
|
int pcie_caps_offset;
|
||||||
|
u16 devctl;
|
||||||
|
|
||||||
|
pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
||||||
|
if (pcie_caps_offset == 0)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
|
||||||
|
&devctl);
|
||||||
|
devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
|
||||||
|
devctl |= new_values;
|
||||||
|
pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
|
||||||
|
devctl);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Second PCI initialization entry point, called by subsys_initcall.
|
||||||
|
*
|
||||||
|
* The controllers have been set up by the time we get here, by a call to
|
||||||
|
* tile_pci_init.
|
||||||
|
*/
|
||||||
|
static int __init pcibios_init(void)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
pr_info("PCI: Probing PCI hardware\n");
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Delay a bit in case devices aren't ready. Some devices are
|
||||||
|
* known to require at least 20ms here, but we use a more
|
||||||
|
* conservative value.
|
||||||
|
*/
|
||||||
|
mdelay(250);
|
||||||
|
|
||||||
|
/* Scan all of the recorded PCI controllers. */
|
||||||
|
for (i = 0; i < num_controllers; i++) {
|
||||||
|
struct pci_controller *controller = &controllers[i];
|
||||||
|
struct pci_bus *bus;
|
||||||
|
|
||||||
|
pr_info("PCI: initializing controller #%d\n", i);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This comes from the generic Linux PCI driver.
|
||||||
|
*
|
||||||
|
* It reads the PCI tree for this bus into the Linux
|
||||||
|
* data structures.
|
||||||
|
*
|
||||||
|
* This is inlined in linux/pci.h and calls into
|
||||||
|
* pci_scan_bus_parented() in probe.c.
|
||||||
|
*/
|
||||||
|
bus = pci_scan_bus(0, controller->ops, controller);
|
||||||
|
controller->root_bus = bus;
|
||||||
|
controller->last_busno = bus->subordinate;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Do machine dependent PCI interrupt routing */
|
||||||
|
pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This comes from the generic Linux PCI driver.
|
||||||
|
*
|
||||||
|
* It allocates all of the resources (I/O memory, etc)
|
||||||
|
* associated with the devices read in above.
|
||||||
|
*/
|
||||||
|
|
||||||
|
pci_assign_unassigned_resources();
|
||||||
|
|
||||||
|
/* Configure the max_read_size and max_payload_size values. */
|
||||||
|
fixup_read_and_payload_sizes();
|
||||||
|
|
||||||
|
/* Record the I/O resources in the PCI controller structure. */
|
||||||
|
for (i = 0; i < num_controllers; i++) {
|
||||||
|
struct pci_bus *root_bus = controllers[i].root_bus;
|
||||||
|
struct pci_bus *next_bus;
|
||||||
|
struct pci_dev *dev;
|
||||||
|
|
||||||
|
list_for_each_entry(dev, &root_bus->devices, bus_list) {
|
||||||
|
/* Find the PCI host controller, ie. the 1st bridge. */
|
||||||
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
|
||||||
|
(PCI_SLOT(dev->devfn) == 0)) {
|
||||||
|
next_bus = dev->subordinate;
|
||||||
|
controllers[i].mem_resources[0] =
|
||||||
|
*next_bus->resource[0];
|
||||||
|
controllers[i].mem_resources[1] =
|
||||||
|
*next_bus->resource[1];
|
||||||
|
controllers[i].mem_resources[2] =
|
||||||
|
*next_bus->resource[2];
|
||||||
|
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
subsys_initcall(pcibios_init);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* No bus fixups needed.
|
||||||
|
*/
|
||||||
|
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
|
||||||
|
{
|
||||||
|
/* Nothing needs to be done. */
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This can be called from the generic PCI layer, but doesn't need to
|
||||||
|
* do anything.
|
||||||
|
*/
|
||||||
|
char __devinit *pcibios_setup(char *str)
|
||||||
|
{
|
||||||
|
/* Nothing needs to be done. */
|
||||||
|
return str;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This is called from the generic Linux layer.
|
||||||
|
*/
|
||||||
|
void __init pcibios_update_irq(struct pci_dev *dev, int irq)
|
||||||
|
{
|
||||||
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Enable memory and/or address decoding, as appropriate, for the
|
||||||
|
* device described by the 'dev' struct.
|
||||||
|
*
|
||||||
|
* This is called from the generic PCI layer, and can be called
|
||||||
|
* for bridges or endpoints.
|
||||||
|
*/
|
||||||
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
||||||
|
{
|
||||||
|
u16 cmd, old_cmd;
|
||||||
|
u8 header_type;
|
||||||
|
int i;
|
||||||
|
struct resource *r;
|
||||||
|
|
||||||
|
pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
|
||||||
|
|
||||||
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
||||||
|
old_cmd = cmd;
|
||||||
|
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
|
||||||
|
/*
|
||||||
|
* For bridges, we enable both memory and I/O decoding
|
||||||
|
* in call cases.
|
||||||
|
*/
|
||||||
|
cmd |= PCI_COMMAND_IO;
|
||||||
|
cmd |= PCI_COMMAND_MEMORY;
|
||||||
|
} else {
|
||||||
|
/*
|
||||||
|
* For endpoints, we enable memory and/or I/O decoding
|
||||||
|
* only if they have a memory resource of that type.
|
||||||
|
*/
|
||||||
|
for (i = 0; i < 6; i++) {
|
||||||
|
r = &dev->resource[i];
|
||||||
|
if (r->flags & IORESOURCE_UNSET) {
|
||||||
|
pr_err("PCI: Device %s not available "
|
||||||
|
"because of resource collisions\n",
|
||||||
|
pci_name(dev));
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
if (r->flags & IORESOURCE_IO)
|
||||||
|
cmd |= PCI_COMMAND_IO;
|
||||||
|
if (r->flags & IORESOURCE_MEM)
|
||||||
|
cmd |= PCI_COMMAND_MEMORY;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* We only write the command if it changed.
|
||||||
|
*/
|
||||||
|
if (cmd != old_cmd)
|
||||||
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
|
||||||
|
{
|
||||||
|
unsigned long start = pci_resource_start(dev, bar);
|
||||||
|
unsigned long len = pci_resource_len(dev, bar);
|
||||||
|
unsigned long flags = pci_resource_flags(dev, bar);
|
||||||
|
|
||||||
|
if (!len)
|
||||||
|
return NULL;
|
||||||
|
if (max && len > max)
|
||||||
|
len = max;
|
||||||
|
|
||||||
|
if (!(flags & IORESOURCE_MEM)) {
|
||||||
|
pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
|
||||||
|
start = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
return (void __iomem *)start;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL(pci_iomap);
|
||||||
|
|
||||||
|
|
||||||
|
/****************************************************************
|
||||||
|
*
|
||||||
|
* Tile PCI config space read/write routines
|
||||||
|
*
|
||||||
|
****************************************************************/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* These are the normal read and write ops
|
||||||
|
* These are expanded with macros from pci_bus_read_config_byte() etc.
|
||||||
|
*
|
||||||
|
* devfn is the combined PCI slot & function.
|
||||||
|
*
|
||||||
|
* offset is in bytes, from the start of config space for the
|
||||||
|
* specified bus & slot.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int __devinit tile_cfg_read(struct pci_bus *bus,
|
||||||
|
unsigned int devfn,
|
||||||
|
int offset,
|
||||||
|
int size,
|
||||||
|
u32 *val)
|
||||||
|
{
|
||||||
|
struct pci_controller *controller = bus->sysdata;
|
||||||
|
int busnum = bus->number & 0xff;
|
||||||
|
int slot = (devfn >> 3) & 0x1f;
|
||||||
|
int function = devfn & 0x7;
|
||||||
|
u32 addr;
|
||||||
|
int config_mode = 1;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* There is no bridge between the Tile and bus 0, so we
|
||||||
|
* use config0 to talk to bus 0.
|
||||||
|
*
|
||||||
|
* If we're talking to a bus other than zero then we
|
||||||
|
* must have found a bridge.
|
||||||
|
*/
|
||||||
|
if (busnum == 0) {
|
||||||
|
/*
|
||||||
|
* We fake an empty slot for (busnum == 0) && (slot > 0),
|
||||||
|
* since there is only one slot on bus 0.
|
||||||
|
*/
|
||||||
|
if (slot) {
|
||||||
|
*val = 0xFFFFFFFF;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
config_mode = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
addr = busnum << 20; /* Bus in 27:20 */
|
||||||
|
addr |= slot << 15; /* Slot (device) in 19:15 */
|
||||||
|
addr |= function << 12; /* Function is in 14:12 */
|
||||||
|
addr |= (offset & 0xFFF); /* byte address in 0:11 */
|
||||||
|
|
||||||
|
return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
|
||||||
|
(HV_VirtAddr)(val), size, addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* See tile_cfg_read() for relevent comments.
|
||||||
|
* Note that "val" is the value to write, not a pointer to that value.
|
||||||
|
*/
|
||||||
|
static int __devinit tile_cfg_write(struct pci_bus *bus,
|
||||||
|
unsigned int devfn,
|
||||||
|
int offset,
|
||||||
|
int size,
|
||||||
|
u32 val)
|
||||||
|
{
|
||||||
|
struct pci_controller *controller = bus->sysdata;
|
||||||
|
int busnum = bus->number & 0xff;
|
||||||
|
int slot = (devfn >> 3) & 0x1f;
|
||||||
|
int function = devfn & 0x7;
|
||||||
|
u32 addr;
|
||||||
|
int config_mode = 1;
|
||||||
|
HV_VirtAddr valp = (HV_VirtAddr)&val;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For bus 0 slot 0 we use config 0 accesses.
|
||||||
|
*/
|
||||||
|
if (busnum == 0) {
|
||||||
|
/*
|
||||||
|
* We fake an empty slot for (busnum == 0) && (slot > 0),
|
||||||
|
* since there is only one slot on bus 0.
|
||||||
|
*/
|
||||||
|
if (slot)
|
||||||
|
return 0;
|
||||||
|
config_mode = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
addr = busnum << 20; /* Bus in 27:20 */
|
||||||
|
addr |= slot << 15; /* Slot (device) in 19:15 */
|
||||||
|
addr |= function << 12; /* Function is in 14:12 */
|
||||||
|
addr |= (offset & 0xFFF); /* byte address in 0:11 */
|
||||||
|
|
||||||
|
#ifdef __BIG_ENDIAN
|
||||||
|
/* Point to the correct part of the 32-bit "val". */
|
||||||
|
valp += 4 - size;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
|
||||||
|
valp, size, addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static struct pci_ops tile_cfg_ops = {
|
||||||
|
.read = tile_cfg_read,
|
||||||
|
.write = tile_cfg_write,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* In the following, each PCI controller's mem_resources[1]
|
||||||
|
* represents its (non-prefetchable) PCI memory resource.
|
||||||
|
* mem_resources[0] and mem_resources[2] refer to its PCI I/O and
|
||||||
|
* prefetchable PCI memory resources, respectively.
|
||||||
|
* For more details, see pci_setup_bridge() in setup-bus.c.
|
||||||
|
* By comparing the target PCI memory address against the
|
||||||
|
* end address of controller 0, we can determine the controller
|
||||||
|
* that should accept the PCI memory access.
|
||||||
|
*/
|
||||||
|
#define TILE_READ(size, type) \
|
||||||
|
type _tile_read##size(unsigned long addr) \
|
||||||
|
{ \
|
||||||
|
type val; \
|
||||||
|
int idx = 0; \
|
||||||
|
if (addr > controllers[0].mem_resources[1].end && \
|
||||||
|
addr > controllers[0].mem_resources[2].end) \
|
||||||
|
idx = 1; \
|
||||||
|
if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \
|
||||||
|
(HV_VirtAddr)(&val), sizeof(type), addr)) \
|
||||||
|
pr_err("PCI: read %zd bytes at 0x%lX failed\n", \
|
||||||
|
sizeof(type), addr); \
|
||||||
|
return val; \
|
||||||
|
} \
|
||||||
|
EXPORT_SYMBOL(_tile_read##size)
|
||||||
|
|
||||||
|
TILE_READ(b, u8);
|
||||||
|
TILE_READ(w, u16);
|
||||||
|
TILE_READ(l, u32);
|
||||||
|
TILE_READ(q, u64);
|
||||||
|
|
||||||
|
#define TILE_WRITE(size, type) \
|
||||||
|
void _tile_write##size(type val, unsigned long addr) \
|
||||||
|
{ \
|
||||||
|
int idx = 0; \
|
||||||
|
if (addr > controllers[0].mem_resources[1].end && \
|
||||||
|
addr > controllers[0].mem_resources[2].end) \
|
||||||
|
idx = 1; \
|
||||||
|
if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \
|
||||||
|
(HV_VirtAddr)(&val), sizeof(type), addr)) \
|
||||||
|
pr_err("PCI: write %zd bytes at 0x%lX failed\n", \
|
||||||
|
sizeof(type), addr); \
|
||||||
|
} \
|
||||||
|
EXPORT_SYMBOL(_tile_write##size)
|
||||||
|
|
||||||
|
TILE_WRITE(b, u8);
|
||||||
|
TILE_WRITE(w, u16);
|
||||||
|
TILE_WRITE(l, u32);
|
||||||
|
TILE_WRITE(q, u64);
|
||||||
|
|
@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
|
||||||
obj-$(CONFIG_X86_VISWS) += setup-irq.o
|
obj-$(CONFIG_X86_VISWS) += setup-irq.o
|
||||||
obj-$(CONFIG_MN10300) += setup-bus.o
|
obj-$(CONFIG_MN10300) += setup-bus.o
|
||||||
obj-$(CONFIG_MICROBLAZE) += setup-bus.o
|
obj-$(CONFIG_MICROBLAZE) += setup-bus.o
|
||||||
|
obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
|
||||||
|
|
||||||
#
|
#
|
||||||
# ACPI Related PCI FW Functions
|
# ACPI Related PCI FW Functions
|
||||||
|
|
|
||||||
|
|
@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
|
||||||
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
|
||||||
quirk_unhide_mch_dev6);
|
quirk_unhide_mch_dev6);
|
||||||
|
|
||||||
|
#ifdef CONFIG_TILE
|
||||||
|
/*
|
||||||
|
* The Tilera TILEmpower platform needs to set the link speed
|
||||||
|
* to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
|
||||||
|
* setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
|
||||||
|
* capability register of the PEX8624 PCIe switch. The switch
|
||||||
|
* supports link speed auto negotiation, but falsely sets
|
||||||
|
* the link speed to 5GT/s.
|
||||||
|
*/
|
||||||
|
static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
|
||||||
|
{
|
||||||
|
if (tile_plx_gen1) {
|
||||||
|
pci_write_config_dword(dev, 0x98, 0x1);
|
||||||
|
mdelay(50);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
|
||||||
|
#endif /* CONFIG_TILE */
|
||||||
|
|
||||||
#ifdef CONFIG_PCI_MSI
|
#ifdef CONFIG_PCI_MSI
|
||||||
/* Some chipsets do not support MSI. We cannot easily rely on setting
|
/* Some chipsets do not support MSI. We cannot easily rely on setting
|
||||||
|
|
|
||||||
Загрузка…
Ссылка в новой задаче