From 4169c45f179e285feac6bcf25f4bd0db6b109bab Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 14 Nov 2007 19:38:40 -0500 Subject: [PATCH 001/112] ACPI: add control method tracing support Add debug tracing support during certain AML method execution. Four more module parameters are created under /sys/module/acpi/parameters/: trace_method_name: the AML method name that user wants to trace trace_debug_layer: the temporary debug_layer used when tracing the method. Using 0xffffffff by default if it is 0. trace_debug_level: the temporary debug_level used when tracing the method. Using 0x00ffffff by default if it is 0. trace_state: The status of the tracing feature. "enabled" means this feature is enabled and the AML method is traced every time it's executed. "1" means this feature is enabled and the AML method will only be traced during the next execution. "disabled" means this feature is disabled. Users can enable/disable this debug tracing feature by "echo string > /sys/module/acpi/parameters/trace_state". "string" should be one of "enable", "disable" and "1". http://bugzilla.kernel.org/show_bug.cgi?id=6629 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/debug.c | 57 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c index bf513e07b773..6df564f4ca6e 100644 --- a/drivers/acpi/debug.c +++ b/drivers/acpi/debug.c @@ -130,6 +130,63 @@ static int param_get_debug_level(char *buffer, struct kernel_param *kp) { module_param_call(debug_layer, param_set_uint, param_get_debug_layer, &acpi_dbg_layer, 0644); module_param_call(debug_level, param_set_uint, param_get_debug_level, &acpi_dbg_level, 0644); +static char trace_method_name[6]; +module_param_string(trace_method_name, trace_method_name, 6, 0644); +static unsigned int trace_debug_layer; +module_param(trace_debug_layer, uint, 0644); +static unsigned int trace_debug_level; +module_param(trace_debug_level, uint, 0644); + +static int param_set_trace_state(const char *val, struct kernel_param *kp) +{ + int result = 0; + + if (!strncmp(val, "enable", strlen("enable") - 1)) { + result = acpi_debug_trace(trace_method_name, trace_debug_level, + trace_debug_layer, 0); + if (result) + result = -EBUSY; + goto exit; + } + + if (!strncmp(val, "disable", strlen("disable") - 1)) { + int name = 0; + result = acpi_debug_trace((char *)&name, trace_debug_level, + trace_debug_layer, 0); + if (result) + result = -EBUSY; + goto exit; + } + + if (!strncmp(val, "1", 1)) { + result = acpi_debug_trace(trace_method_name, trace_debug_level, + trace_debug_layer, 1); + if (result) + result = -EBUSY; + goto exit; + } + + result = -EINVAL; +exit: + return result; +} + +static int param_get_trace_state(char *buffer, struct kernel_param *kp) +{ + if (!acpi_gbl_trace_method_name) + return sprintf(buffer, "disable"); + else { + if (acpi_gbl_trace_flags & 1) + return sprintf(buffer, "1"); + else + return sprintf(buffer, "enable"); + } + return 0; +} + +module_param_call(trace_state, param_set_trace_state, param_get_trace_state, + NULL, 0644); + /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ From b4d2730a0dda91a43c81a02f5225f5d536cabb09 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 14 Nov 2007 19:53:21 -0500 Subject: [PATCH 002/112] ACPI: document method tracing hooks Signed-off-by: Len Brown --- Documentation/00-INDEX | 3 +++ Documentation/acpi/method-tracing.txt | 26 ++++++++++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 Documentation/acpi/method-tracing.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 299615d821ac..161edbcf905e 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -14,6 +14,7 @@ Following translations are available on the WWW: - this file. ABI/ - info on kernel <-> userspace ABI and relative interface stability. + BUG-HUNTING - brute force method of doing binary search of patches to find bug. Changes @@ -66,6 +67,8 @@ VGA-softcursor.txt - how to change your VGA cursor from a blinking underscore. accounting/ - documentation on accounting and taskstats. +acpi/ + - info on ACPI-specific hooks in the kernel. aoe/ - description of AoE (ATA over Ethernet) along with config examples. applying-patches.txt diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt new file mode 100644 index 000000000000..f6efb1ea559a --- /dev/null +++ b/Documentation/acpi/method-tracing.txt @@ -0,0 +1,26 @@ +/sys/module/acpi/parameters/: + +trace_method_name + The AML method name that the user wants to trace + +trace_debug_layer + The temporary debug_layer used when tracing the method. + Using 0xffffffff by default if it is 0. + +trace_debug_level + The temporary debug_level used when tracing the method. + Using 0x00ffffff by default if it is 0. + +trace_state + The status of the tracing feature. + + "enabled" means this feature is enabled + and the AML method is traced every time it's executed. + + "1" means this feature is enabled and the AML method + will only be traced during the next execution. + + "disabled" means this feature is disabled. + Users can enable/disable this debug tracing feature by + "echo string > /sys/module/acpi/parameters/trace_state". + "string" should be one of "enable", "disable" and "1". From 60555e371d56a1e410d9fb6fc68f4e953f8f4109 Mon Sep 17 00:00:00 2001 From: "len.brown@intel.com" Date: Mon, 19 Nov 2007 22:22:37 -0500 Subject: [PATCH 003/112] ACPI: CONFIG_CPU_IDLE=ACPI by default In Linux-2.6.24, CPU_IDLE went upstream, default =n. For Linux-2.6.25, enable it by default on ACPI systems. For Linux-2.6.26, we plan to enable it always on ACPI systems. Signed-off-by: Len Brown --- drivers/cpuidle/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 3bed4127d4ad..7dbc4a83c45c 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -1,13 +1,13 @@ config CPU_IDLE bool "CPU idle PM support" + default ACPI help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform governors that can be swapped during runtime. - If you're using a mobile platform that supports CPU idle PM (e.g. - an ACPI-capable notebook), you should say Y here. + If you're using an ACPI-enabled platform, you should say Y here. config CPU_IDLE_GOV_LADDER bool From a7f9b1f24974da287771e2d70b30d9ca7bd66684 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 20 Nov 2007 13:38:59 -0500 Subject: [PATCH 004/112] ACPI: disable stray GPE, prevent ACPI interrupt storm GPEs are disabled depending on their type -- WAKE, WAKE_RUN, and RUNTIME. An error is returned if we are asked to disable a GPE that has no type. But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized. In this case, when an external CRT is plugged in, the GPE fires, we attempt to disable the GPE, but instead just return an error. So the GPE stays asserted and an ACPI interrupt storm follows. The fix is to disable a firing GPE, even if it comes from outer space. http://bugzilla.kernel.org/show_bug.cgi?id=6217 Signed-off-by: Zhang Rui Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/events/evgpe.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index e22f4a973c0f..056b78844829 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -270,18 +270,18 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) case ACPI_GPE_TYPE_WAKE_RUN: ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED); - /*lint -fallthrough */ + /* fallthrough */ case ACPI_GPE_TYPE_RUNTIME: /* Disable the requested runtime GPE */ ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED); - status = acpi_hw_write_gpe_enable_reg(gpe_event_info); - break; + + /* fallthrough */ default: - return_ACPI_STATUS(AE_BAD_PARAMETER); + acpi_hw_write_gpe_enable_reg(gpe_event_info); } return_ACPI_STATUS(AE_OK); From ed9cbcd40004904dbe61ccc16d6106a7de38c998 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 20 Nov 2007 14:20:21 -0500 Subject: [PATCH 005/112] Revert "speedstep-lib.c: fix frequency multiplier for Pentium4 models 0&1" For P4 model < 2, The MSR_FBC_REGISTER_ID ratio is undefined. Revert the commit that was added to handle that case, as it results in random MHz displayed. Something else will have to be done to properly handle model < 2. //commit 3e4159ab35c88aef5e063ba78796b277b762a30a //Author: matthias.christian //Date: Sat Feb 5 23:09:38 2005 +0000 // // [PATCH] speedstep-lib.c: fix frequency multiplier for Pentium4 models 0&1 // // The Pentium4 models 0&1 have a longer MSR_EBC_FREQUENCY_ID register as the // models 2&3, so the bit shift must be bigger. // // Signed-off-by: Matthias-Christian Ott // Signed-off-by: Dominik Brodowski // Signed-off-by: Andrew Morton // Signed-off-by: Linus Torvalds // // BKrev: 42055232eWM-NgjhZVir44mp5GXktQ http://bugzilla.kernel.org/show_bug.cgi?id=7186 Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/speedstep-lib.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index 76c3ab0da468..98d4fdb7dc04 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -189,10 +189,7 @@ static unsigned int pentium4_get_frequency(void) printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to \n"); /* Multiplier. */ - if (c->x86_model < 2) - mult = msr_lo >> 27; - else - mult = msr_lo >> 24; + mult = msr_lo >> 24; dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult)); From 17bc54eef91df29f0a22e8a1562a404cf7a68e74 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 13 Nov 2007 13:05:45 +0300 Subject: [PATCH 006/112] ACPI: Defer enabling of level GPE until all pending notifies done Level GPE should not be enabled until all work caused by it is done, e.g. all Notify() methods are completed. This can be accomplished by appending enable_gpe function to the end of notify queue. Signed-off-by: Alexey Starikovskiy Acked-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/events/evgpe.c | 17 +++++++++++---- drivers/acpi/osl.c | 42 +++++++------------------------------ 2 files changed, 21 insertions(+), 38 deletions(-) diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index e22f4a973c0f..b4509f93ff81 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -501,6 +501,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) * an interrupt handler. * ******************************************************************************/ +static void acpi_ev_asynch_enable_gpe(void *context); static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) { @@ -576,22 +577,30 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) method_node))); } } + /* Defer enabling of GPE until all notify handlers are done */ + acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_asynch_enable_gpe, + gpe_event_info); + return_VOID; +} - if ((local_gpe_event_info.flags & ACPI_GPE_XRUPT_TYPE_MASK) == +static void acpi_ev_asynch_enable_gpe(void *context) +{ + struct acpi_gpe_event_info *gpe_event_info = context; + acpi_status status; + if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) { /* * GPE is level-triggered, we clear the GPE status bit after * handling the event. */ - status = acpi_hw_clear_gpe(&local_gpe_event_info); + status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { return_VOID; } } /* Enable this GPE */ - - (void)acpi_hw_write_gpe_enable_reg(&local_gpe_event_info); + (void)acpi_hw_write_gpe_enable_reg(gpe_event_info); return_VOID; } diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e3a673a00845..21d34595dbae 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -618,25 +618,6 @@ static void acpi_os_execute_deferred(struct work_struct *work) dpc->function(dpc->context); kfree(dpc); - /* Yield cpu to notify thread */ - cond_resched(); - - return; -} - -static void acpi_os_execute_notify(struct work_struct *work) -{ - struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work); - - if (!dpc) { - printk(KERN_ERR PREFIX "Invalid (NULL) context\n"); - return; - } - - dpc->function(dpc->context); - - kfree(dpc); - return; } @@ -660,7 +641,7 @@ acpi_status acpi_os_execute(acpi_execute_type type, { acpi_status status = AE_OK; struct acpi_os_dpc *dpc; - + struct workqueue_struct *queue; ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Scheduling function [%p(%p)] for deferred execution.\n", function, context)); @@ -684,20 +665,13 @@ acpi_status acpi_os_execute(acpi_execute_type type, dpc->function = function; dpc->context = context; - if (type == OSL_NOTIFY_HANDLER) { - INIT_WORK(&dpc->work, acpi_os_execute_notify); - if (!queue_work(kacpi_notify_wq, &dpc->work)) { - status = AE_ERROR; - kfree(dpc); - } - } else { - INIT_WORK(&dpc->work, acpi_os_execute_deferred); - if (!queue_work(kacpid_wq, &dpc->work)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Call to queue_work() failed.\n")); - status = AE_ERROR; - kfree(dpc); - } + INIT_WORK(&dpc->work, acpi_os_execute_deferred); + queue = (type == OSL_NOTIFY_HANDLER) ? kacpi_notify_wq : kacpid_wq; + if (!queue_work(queue, &dpc->work)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Call to queue_work() failed.\n")); + status = AE_ERROR; + kfree(dpc); } return_ACPI_STATUS(status); } From 223630fe3dc564b94e51ff4eb839828c9083f2f6 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 6 Dec 2007 23:36:35 -0500 Subject: [PATCH 007/112] export thermal notification to userspace when nocrt is set module parameter is used to prevent the thermal_zone action upon critical trip points. But exporting this notification to userspace is still useful. By setting nocrt with this patch applied, ACPI will take no action but exporting the events to userspace upon critical/hot trip points. http://bugzilla.kernel.org/show_bug.cgi?id=9139 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 5f79b4451212..3a0af9a8cd27 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -492,7 +492,7 @@ static int acpi_thermal_get_devices(struct acpi_thermal *tz) static int acpi_thermal_critical(struct acpi_thermal *tz) { - if (!tz || !tz->trips.critical.flags.valid || nocrt) + if (!tz || !tz->trips.critical.flags.valid) return -EINVAL; if (tz->temperature >= tz->trips.critical.temperature) { @@ -501,9 +501,6 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) } else if (tz->trips.critical.flags.enabled) tz->trips.critical.flags.enabled = 0; - printk(KERN_EMERG - "Critical temperature reached (%ld C), shutting down.\n", - KELVIN_TO_CELSIUS(tz->temperature)); acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, @@ -511,14 +508,20 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); - orderly_poweroff(true); + /* take no action if nocrt is set */ + if(!nocrt) { + printk(KERN_EMERG + "Critical temperature reached (%ld C), shutting down.\n", + KELVIN_TO_CELSIUS(tz->temperature)); + orderly_poweroff(true); + } return 0; } static int acpi_thermal_hot(struct acpi_thermal *tz) { - if (!tz || !tz->trips.hot.flags.valid || nocrt) + if (!tz || !tz->trips.hot.flags.valid) return -EINVAL; if (tz->temperature >= tz->trips.hot.temperature) { @@ -534,7 +537,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); - /* TBD: Call user-mode "sleep(S4)" function */ + /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */ return 0; } From 3620f2f2f39e7870cf1a4fb2e34063a142f28716 Mon Sep 17 00:00:00 2001 From: Frank Seidel Date: Fri, 7 Dec 2007 13:20:34 +0100 Subject: [PATCH 008/112] ACPI: Fix autloading of dock, video, bay and all linux specific HID drivers References: https://bugzilla.novell.com/show_bug.cgi?id=302482 Due to the new autloading of acpi drivers, the dock driver wasn't loaded anymore as there is no HID to identify it with (dock is needed if ACPI has a _DCK method). This patch is a workaround for this, original by Thomas Renninger, revised first by Kay Sievers and last by Frank Seidel. V2 of this patch fixed problems on systems without a defined _CID for the docking devices. Signed-off-by: Thomas Renninger Signed-off-by: Kay Sievers Signed-off-by: Frank Seidel Signed-off-by: Len Brown --- drivers/acpi/scan.c | 100 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 85 insertions(+), 15 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5b4d462117cf..bf079265ce7e 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -941,6 +941,15 @@ static int acpi_bay_match(struct acpi_device *device){ return -ENODEV; } +/* + * acpi_dock_match - see if a device has a _DCK method + */ +static int acpi_dock_match(struct acpi_device *device) +{ + acpi_handle tmp; + return acpi_get_handle(device->handle, "_DCK", &tmp); +} + static void acpi_device_set_id(struct acpi_device *device, struct acpi_device *parent, acpi_handle handle, int type) @@ -950,6 +959,7 @@ static void acpi_device_set_id(struct acpi_device *device, char *hid = NULL; char *uid = NULL; struct acpi_compatible_id_list *cid_list = NULL; + const char *cid_add = NULL; acpi_status status; switch (type) { @@ -972,15 +982,18 @@ static void acpi_device_set_id(struct acpi_device *device, device->flags.bus_address = 1; } - if(!(info->valid & (ACPI_VALID_HID | ACPI_VALID_CID))){ - status = acpi_video_bus_match(device); - if(ACPI_SUCCESS(status)) - hid = ACPI_VIDEO_HID; + /* If we have a video/bay/dock device, add our selfdefined + HID to the CID list. Like that the video/bay/dock drivers + will get autoloaded and the device might still match + against another driver. + */ + if (ACPI_SUCCESS(acpi_video_bus_match(device))) + cid_add = ACPI_VIDEO_HID; + else if (ACPI_SUCCESS(acpi_bay_match(device))) + cid_add = ACPI_BAY_HID; + else if (ACPI_SUCCESS(acpi_dock_match(device))) + cid_add = ACPI_DOCK_HID; - status = acpi_bay_match(device); - if (ACPI_SUCCESS(status)) - hid = ACPI_BAY_HID; - } break; case ACPI_BUS_TYPE_POWER: hid = ACPI_POWER_HID; @@ -1021,11 +1034,44 @@ static void acpi_device_set_id(struct acpi_device *device, strcpy(device->pnp.unique_id, uid); device->flags.unique_id = 1; } - if (cid_list) { - device->pnp.cid_list = kmalloc(cid_list->size, GFP_KERNEL); - if (device->pnp.cid_list) - memcpy(device->pnp.cid_list, cid_list, cid_list->size); - else + if (cid_list || cid_add) { + struct acpi_compatible_id_list *list; + int size = 0; + int count = 0; + + if (cid_list) { + size = cid_list->size; + } else if (cid_add) { + size = sizeof(struct acpi_compatible_id_list); + cid_list = ACPI_ALLOCATE_ZEROED((acpi_size) size); + if (!cid_list) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(buffer.pointer); + return; + } else { + cid_list->count = 0; + cid_list->size = size; + } + } + if (cid_add) + size += sizeof(struct acpi_compatible_id); + list = kmalloc(size, GFP_KERNEL); + + if (list) { + if (cid_list) { + memcpy(list, cid_list, cid_list->size); + count = cid_list->count; + } + if (cid_add) { + strncpy(list->id[count].value, cid_add, + ACPI_MAX_CID_LENGTH); + count++; + device->flags.compatible_ids = 1; + } + list->size = size; + list->count = count; + device->pnp.cid_list = list; + } else printk(KERN_ERR "Memory allocation error\n"); } @@ -1080,6 +1126,20 @@ static int acpi_bus_remove(struct acpi_device *dev, int rmdevice) return 0; } +static int +acpi_is_child_device(struct acpi_device *device, + int (*matcher)(struct acpi_device *)) +{ + int result = -ENODEV; + + do { + if (ACPI_SUCCESS(matcher(device))) + return AE_OK; + } while ((device = device->parent)); + + return result; +} + static int acpi_add_single_object(struct acpi_device **child, struct acpi_device *parent, acpi_handle handle, int type, @@ -1131,10 +1191,20 @@ acpi_add_single_object(struct acpi_device **child, case ACPI_BUS_TYPE_PROCESSOR: case ACPI_BUS_TYPE_DEVICE: result = acpi_bus_get_status(device); - if (ACPI_FAILURE(result) || !device->status.present) { - result = -ENOENT; + if (ACPI_FAILURE(result)) { + result = -ENODEV; goto end; } + if (!device->status.present) { + /* Bay and dock should be handled even if absent */ + if (!ACPI_SUCCESS( + acpi_is_child_device(device, acpi_bay_match)) && + !ACPI_SUCCESS( + acpi_is_child_device(device, acpi_dock_match))) { + result = -ENODEV; + goto end; + } + } break; default: STRUCT_TO_INT(device->status) = From a340af14b4c08a53c5f7d821d8bd910e17403384 Mon Sep 17 00:00:00 2001 From: Frank Seidel Date: Fri, 7 Dec 2007 13:20:42 +0100 Subject: [PATCH 009/112] ACPI: Add autoload info to dock driver References: https://bugzilla.novell.com/show_bug.cgi?id=302482 Signed-off-by: Thomas Renninger Signed-off-by: Kay Sievers Signed-off-by: Frank Seidel Signed-off-by: Len Brown --- drivers/acpi/dock.c | 6 ++++++ include/acpi/acpi_drivers.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 1dabdf4c07b3..b3dec2101e2e 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -51,6 +51,12 @@ static struct atomic_notifier_head dock_notifier_list; static struct platform_device *dock_device; static char dock_device_name[] = "dock"; +static const struct acpi_device_id dock_device_ids[] = { + {"LNXDOCK", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, dock_device_ids); + struct dock_station { acpi_handle handle; unsigned long last_dock_time; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index f85f77a538aa..581daa451ffc 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -48,6 +48,7 @@ #define ACPI_BUTTON_HID_SLEEPF "LNXSLPBN" #define ACPI_VIDEO_HID "LNXVIDEO" #define ACPI_BAY_HID "LNXIOBAY" +#define ACPI_DOCK_HID "LNXDOCK" /* -------------------------------------------------------------------------- PCI From 17196d6e533a5c09ca57bf398099ffa3c13248b1 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 7 Dec 2007 13:20:43 +0100 Subject: [PATCH 010/112] ACPI: Also autoload the bay driver, was forgotten... Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/acpi/bay.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index 6daf6088ac88..477711435b24 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -46,6 +46,12 @@ MODULE_LICENSE("GPL"); printk(KERN_DEBUG PREFIX "%s: %s\n", prefix, s); } static void bay_notify(acpi_handle handle, u32 event, void *data); +static const struct acpi_device_id bay_device_ids[] = { + {"LNXIOBAY", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, bay_device_ids); + struct bay { acpi_handle handle; char *name; From 2fdf07417e57136cf6baedf9508e2169a059ebea Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 13 Dec 2007 08:33:59 +0000 Subject: [PATCH 011/112] acpi: make __acpi_map_table() and __init function .. as it it used only during early boot. Signed-off-by: Jan Beulich arch/ia64/kernel/acpi.c | 2 +- arch/x86/kernel/acpi/boot.c | 4 ++-- drivers/acpi/osl.c | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-) Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 2 +- arch/x86/kernel/acpi/boot.c | 4 ++-- drivers/acpi/osl.c | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 00b5d08f6da8..f932c486836a 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -152,7 +152,7 @@ int acpi_request_vector(u32 int_type) return vector; } -char *__acpi_map_table(unsigned long phys_addr, unsigned long size) +char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) { return __va(phys_addr); } diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0ca27c7b0e8d..b595522dd799 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -106,7 +106,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; #ifdef CONFIG_X86_64 /* rely on all ACPI tables being in the direct mapping */ -char *__acpi_map_table(unsigned long phys_addr, unsigned long size) +char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) return NULL; @@ -131,7 +131,7 @@ char *__acpi_map_table(unsigned long phys_addr, unsigned long size) * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and * count idx down while incrementing the phys address. */ -char *__acpi_map_table(unsigned long phys, unsigned long size) +char *__init __acpi_map_table(unsigned long phys, unsigned long size) { unsigned long base, offset, mapped_size; int idx; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e3a673a00845..82525d9cccb0 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -211,7 +211,8 @@ acpi_physical_address __init acpi_os_get_root_pointer(void) return acpi_find_rsdp(); } -void __iomem *acpi_os_map_memory(acpi_physical_address phys, acpi_size size) +void __iomem *__init_refok +acpi_os_map_memory(acpi_physical_address phys, acpi_size size) { if (phys > ULONG_MAX) { printk(KERN_ERR PREFIX "Cannot map memory that high\n"); From 4963f62045b64f93c45fbcb6f8f0baf1e3e7a127 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 13 Dec 2007 23:50:45 -0500 Subject: [PATCH 012/112] cpuidle: create processor.latency_factor tunable Start with default value of 6, so by default, there is no functional change in this patch. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f996d0e37689..26ade1f3f5cd 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -94,6 +94,9 @@ module_param(bm_history, uint, 0644); static int acpi_processor_set_power_policy(struct acpi_processor *pr); +#else /* CONFIG_CPU_IDLE */ +static unsigned int latency_factor __read_mostly = 6; +module_param(latency_factor, uint, 0644); #endif /* @@ -1576,7 +1579,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); state->exit_latency = cx->latency; - state->target_residency = cx->latency * 6; + state->target_residency = cx->latency * latency_factor; state->power_usage = cx->power; state->flags = 0; From 25de5718356e264820625600a9edca1df5ff26f8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 14 Dec 2007 00:24:15 -0500 Subject: [PATCH 013/112] cpuidle: default processor.latency_factor=2 More aggressively request deep C-states. Note that the job of the OS is to minimize latency impact to expected break events such as interrupts. It is not the job of the OS to try to calculate if the C-state will reach energy break-even. The platform doesn't give the OS enough information for it to make that calculation. Thus, it is up to the platform to decide if it is worth it to go as deep as the OS requested it to, or if it should internally demote to a more shallow C-state. But the converse is not true. The platform can not promote into a deeper C-state than the OS requested else it may violate latency constraints. So it is important that the OS be aggressive in giving the platform permission to enter deep C-states. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 26ade1f3f5cd..bc99b7b9094f 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -95,7 +95,7 @@ module_param(bm_history, uint, 0644); static int acpi_processor_set_power_policy(struct acpi_processor *pr); #else /* CONFIG_CPU_IDLE */ -static unsigned int latency_factor __read_mostly = 6; +static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); #endif From 239665a3bb0a2234980f918913add31bc536cfd1 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 23 Nov 2007 20:08:02 -0500 Subject: [PATCH 014/112] ACPI: tables: complete searching upon RSDP w/ bad checksum. ACPI tables follow a tree structure in memory. The root of the tree is the RSDP (Root System Description Pointer). To find the RSDP, the OS searches for the signature "RSD PTR " in well known physical memory locations. Then the OS computes a table checksum to verify that the signature is really part of a valid table header. Some systems have a proper signature but an invalid checksum; followed elsewhere by a proper signature with valid checksum. http://bugzilla.kernel.org/show_bug.cgi?id=9444 The Linux RSDP scanning code bailed out on those systems and as a result they booted with ACPI disabled. Fix this by deleting the Linux RSDP scanning code and plugging in the ACPICA RSDP scanning code. Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 26 ++++++++++++---------- arch/x86/kernel/acpi/boot.c | 40 ---------------------------------- arch/x86/kernel/srat_32.c | 2 +- drivers/acpi/osl.c | 8 +++++-- drivers/acpi/tables/Makefile | 2 +- drivers/acpi/tables/tbxfroot.c | 4 +--- include/linux/acpi.h | 1 - 7 files changed, 23 insertions(+), 60 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 897e2083a3b1..63d6dcdc2e2a 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -69,6 +69,20 @@ unsigned int acpi_cpei_phys_cpuid; unsigned long acpi_wakeup_address = 0; +#ifdef CONFIG_IA64_GENERIC +static unsigned long __init acpi_find_rsdp(void) +{ + unsigned long rsdp_phys = 0; + + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + rsdp_phys = efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) + printk(KERN_WARNING PREFIX + "v1.0/r0.71 tables no longer supported\n"); + return rsdp_phys; +} +#endif + const char __init * acpi_get_sysname(void) { @@ -631,18 +645,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) return 0; } -unsigned long __init acpi_find_rsdp(void) -{ - unsigned long rsdp_phys = 0; - - if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) - rsdp_phys = efi.acpi20; - else if (efi.acpi != EFI_INVALID_TABLE_ADDR) - printk(KERN_WARNING PREFIX - "v1.0/r0.71 tables no longer supported\n"); - return rsdp_phys; -} - int __init acpi_boot_init(void) { diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0ca27c7b0e8d..719c74b0141a 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -581,25 +581,6 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) EXPORT_SYMBOL(acpi_unregister_ioapic); -static unsigned long __init -acpi_scan_rsdp(unsigned long start, unsigned long length) -{ - unsigned long offset = 0; - unsigned long sig_len = sizeof("RSD PTR ") - 1; - - /* - * Scan all 16-byte boundaries of the physical memory region for the - * RSDP signature. - */ - for (offset = 0; offset < length; offset += 16) { - if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len)) - continue; - return (start + offset); - } - - return 0; -} - static int __init acpi_parse_sbf(struct acpi_table_header *table) { struct acpi_table_boot *sb; @@ -742,27 +723,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) return 0; } -unsigned long __init acpi_find_rsdp(void) -{ - unsigned long rsdp_phys = 0; - - if (efi_enabled) { - if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) - return efi.acpi20; - else if (efi.acpi != EFI_INVALID_TABLE_ADDR) - return efi.acpi; - } - /* - * Scan memory looking for the RSDP signature. First search EBDA (low - * memory) paragraphs and then search upper memory (E0000-FFFFF). - */ - rsdp_phys = acpi_scan_rsdp(0, 0x400); - if (!rsdp_phys) - rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000); - - return rsdp_phys; -} - #ifdef CONFIG_X86_LOCAL_APIC /* * Parse LAPIC entries in MADT diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c index 2a8713ec0f9a..b3b2c95f19d3 100644 --- a/arch/x86/kernel/srat_32.c +++ b/arch/x86/kernel/srat_32.c @@ -276,7 +276,7 @@ int __init get_memcfg_from_srat(void) int tables = 0; int i = 0; - rsdp_address = acpi_find_rsdp(); + rsdp_address = acpi_os_get_root_pointer(); if (!rsdp_address) { printk("%s: System description tables not found\n", __FUNCTION__); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index aabc6ca4a81c..101691ef66cb 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -207,8 +207,12 @@ acpi_physical_address __init acpi_os_get_root_pointer(void) "System description tables not found\n"); return 0; } - } else - return acpi_find_rsdp(); + } else { + acpi_physical_address pa = 0; + + acpi_find_root_pointer(&pa); + return pa; + } } void __iomem *acpi_os_map_memory(acpi_physical_address phys, acpi_size size) diff --git a/drivers/acpi/tables/Makefile b/drivers/acpi/tables/Makefile index 0a7d7afac255..7385efa61622 100644 --- a/drivers/acpi/tables/Makefile +++ b/drivers/acpi/tables/Makefile @@ -2,6 +2,6 @@ # Makefile for all Linux ACPI interpreter subdirectories # -obj-y := tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o +obj-y := tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o EXTRA_CFLAGS += $(ACPI_CFLAGS) diff --git a/drivers/acpi/tables/tbxfroot.c b/drivers/acpi/tables/tbxfroot.c index cf8fa514189f..9ecb4b6c1e7d 100644 --- a/drivers/acpi/tables/tbxfroot.c +++ b/drivers/acpi/tables/tbxfroot.c @@ -100,7 +100,7 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp) /******************************************************************************* * - * FUNCTION: acpi_tb_find_rsdp + * FUNCTION: acpi_find_root_pointer * * PARAMETERS: table_address - Where the table pointer is returned * @@ -219,8 +219,6 @@ acpi_status acpi_find_root_pointer(acpi_native_uint * table_address) return_ACPI_STATUS(AE_NOT_FOUND); } -ACPI_EXPORT_SYMBOL(acpi_find_root_pointer) - /******************************************************************************* * * FUNCTION: acpi_tb_scan_memory_for_rsdp diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 8ccedf7a0a5a..8deb61171558 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -79,7 +79,6 @@ typedef int (*acpi_table_handler) (struct acpi_table_header *table); typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); char * __acpi_map_table (unsigned long phys_addr, unsigned long size); -unsigned long acpi_find_rsdp (void); int acpi_boot_init (void); int acpi_boot_table_init (void); int acpi_numa_init (void); From 087980295082ccaa816330bc69c29a2ff53a244c Mon Sep 17 00:00:00 2001 From: Yi Yang Date: Thu, 27 Dec 2007 22:04:26 -0500 Subject: [PATCH 015/112] ACPI: /proc/acpi/alarm parsing: handle large numbers properly In function acpi_system_write_alarm in file drivers/acpi/sleep/proc.c, big sec, min, hr, mo, day and yr are counted twice to get reasonable values, that is very superfluous, we can do that only once. In additon, /proc/acpi/alarm can set a related value which can be specified as YYYY years MM months DD days HH hours MM minutes SS senconds, it isn't a date, so you can specify as +0000-00-00 96:00:00 , that means 3 days later, current code can't handle such a case. This patch removes unnecessary code and does with the aforementioned situation. Before applying this patch: [root@localhost /]# cat /proc/acpi/alarm 2007-12-00 00:00:00 [root@localhost /]# echo "0000-00-00 96:180:180" > /proc/acpi/alarm [root@localhost /]# cat /proc/acpi/alarm 0007-12-02 **:**:** [root@localhost /]# After applying this patch: [root@localhost ~]# echo "2007-12-00 00:00:00" > /proc/acpi/alarm [root@localhost ~]# cat /proc/acpi/alarm 2007-12-00 00:00:00 [root@localhost ~]# echo "0000-00-00 96:180:180" > /proc/acpi/alarm [root@localhost ~]# cat /proc/acpi/alarm 0007-12-04 03:03:00 [root@localhost ~]# Signed-off-by: Yi Yang Signed-off-by: Len Brown --- drivers/acpi/sleep/proc.c | 41 ++++++++++----------------------------- 1 file changed, 10 insertions(+), 31 deletions(-) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 1538355c266b..e19eb0c25e62 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -251,27 +251,6 @@ acpi_system_write_alarm(struct file *file, if ((result = get_date_field(&p, &sec))) goto end; - if (sec > 59) { - min += 1; - sec -= 60; - } - if (min > 59) { - hr += 1; - min -= 60; - } - if (hr > 23) { - day += 1; - hr -= 24; - } - if (day > 31) { - mo += 1; - day -= 31; - } - if (mo > 12) { - yr += 1; - mo -= 12; - } - spin_lock_irq(&rtc_lock); rtc_control = CMOS_READ(RTC_CONTROL); @@ -288,24 +267,24 @@ acpi_system_write_alarm(struct file *file, spin_unlock_irq(&rtc_lock); if (sec > 59) { - min++; - sec -= 60; + min += sec/60; + sec = sec%60; } if (min > 59) { - hr++; - min -= 60; + hr += min/60; + min = min%60; } if (hr > 23) { - day++; - hr -= 24; + day += hr/24; + hr = hr%24; } if (day > 31) { - mo++; - day -= 31; + mo += day/32; + day = day%32; } if (mo > 12) { - yr++; - mo -= 12; + yr += mo/13; + mo = mo%13; } spin_lock_irq(&rtc_lock); From 975c30257e75c3d067d4858f60963b80fc6bd0e4 Mon Sep 17 00:00:00 2001 From: Signed-off by Yi Yang Date: Thu, 27 Dec 2007 21:50:42 -0500 Subject: [PATCH 016/112] ACPI: detect invalid argument written to /proc/acpi/alarm /proc/acpi/alarm can't be set correctly, here is a sample: [root@localhost /]# echo "2006 09" > /proc/acpi/alarm [root@localhost /]# cat /proc/acpi/alarm 2007-12-09 09:09:09 [root@localhost /]# echo "2006 04" > /proc/acpi/alarm [root@localhost /]# cat /proc/acpi/alarm 2007-12-04 04:04:04 [root@localhost /]# Obviously, it is wrong, it should consider it as an invalid input. after this patch: [root@localhost /]# echo "2008 09" > /proc/acpi/alarm -bash: echo: write error: Invalid argument [root@localhost /]# Signed-off-by: Yi Yang Signed-off-by: Len Brown --- drivers/acpi/sleep/proc.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 1538355c266b..fce78fbf5f64 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -178,6 +178,9 @@ static int get_date_field(char **p, u32 * value) * Try to find delimeter, only to insert null. The end of the * string won't have one, but is still valid. */ + if (*p == NULL) + return result; + next = strpbrk(*p, "- :"); if (next) *next++ = '\0'; @@ -190,6 +193,8 @@ static int get_date_field(char **p, u32 * value) if (next) *p = next; + else + *p = NULL; return result; } From 623b78c39c4525731f852072edd742cc4fba6786 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 18 May 2007 21:59:28 -0500 Subject: [PATCH 017/112] ACPI: add "processor.ignore_ppc" hook to workaround BIOS _PPC weirdness There have been fixes using _PPC, which seem to unhide a problem on HP nx6125 (double cpufreq switch freezes the machine for several seconds). This one should provide a workaround for the nx6125 and for possible other machines that show any weird _PPC behaviour. Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/acpi/processor_perflib.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 463b0247cbc5..f32010bee4d5 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -60,6 +60,11 @@ static DEFINE_MUTEX(performance_mutex); * policy is adjusted accordingly. */ +static unsigned int ignore_ppc = 0; +module_param(ignore_ppc, uint, 0644); +MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ + "limited by BIOS, this should help"); + #define PPC_REGISTERED 1 #define PPC_IN_USE 2 @@ -72,6 +77,9 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb, struct acpi_processor *pr; unsigned int ppc = 0; + if (ignore_ppc) + return 0; + mutex_lock(&performance_mutex); if (event != CPUFREQ_INCOMPATIBLE) @@ -130,7 +138,13 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) int acpi_processor_ppc_has_changed(struct acpi_processor *pr) { - int ret = acpi_processor_get_platform_limit(pr); + int ret; + + if (ignore_ppc) + return 0; + + ret = acpi_processor_get_platform_limit(pr); + if (ret < 0) return (ret); else From cfaf3747ff3d431fba33f75083b7f50f58ae22ff Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 9 Jan 2008 02:17:47 -0500 Subject: [PATCH 018/112] ACPI: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] According to the ACPI spec 6.3.7, "If a device object (including the processor object) does not have an _STA object, then OSPM assumes that all of the above bits are set, (in other words, the device is present, enabled, shown in the UI and funtioning)". is_processor_present shoud return 1 if the processor device object exists while it doesn't have an _STA object. http://bugzilla.kernel.org/show_bug.cgi?id=8570 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e48ee4f8749f..c53113e18004 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -812,11 +812,18 @@ static int is_processor_present(acpi_handle handle) status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) { - ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present")); - return 0; - } - return 1; + /* + * if a processor object does not have an _STA object, + * OSPM assumes that the processor is present. + */ + if (status == AE_NOT_FOUND) + return 1; + + if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) + return 1; + + ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present")); + return 0; } static From 3e71a87d03055de0b8c8e42aba758ee6494af083 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 11 Jan 2008 02:42:51 +0300 Subject: [PATCH 019/112] ACPI: EC: Do the byte access with a fast path Specification allows only byte access for EC region, so make it separate from bug-compatible multi-byte access. Also do not allow return of garbage in supplied *value. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9341 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index d411017f8c06..63862dfe347b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -563,7 +563,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, void *handler_context, void *region_context) { struct acpi_ec *ec = handler_context; - int result = 0, i = 0; + int result = 0, i; u8 temp = 0; if ((address > 0xFF) || !value || !handler_context) @@ -575,7 +575,16 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (bits != 8 && acpi_strict) return AE_BAD_PARAMETER; - while (bits - i > 0) { + if (function == ACPI_READ) { + result = acpi_ec_read(ec, address, &temp); + *value = temp; + } else { + temp = 0xff & (*value); + result = acpi_ec_write(ec, address, temp); + } + + for (i = 8; unlikely(bits - i > 0); i += 8) { + ++address; if (function == ACPI_READ) { result = acpi_ec_read(ec, address, &temp); (*value) |= ((acpi_integer)temp) << i; @@ -583,8 +592,6 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, temp = 0xff & ((*value) >> i); result = acpi_ec_write(ec, address, temp); } - i += 8; - ++address; } switch (result) { From b3b233c7d948a5f55185fb5a1b248157b948a1e5 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 11 Jan 2008 02:42:57 +0300 Subject: [PATCH 020/112] ACPI: EC: Some hardware requires burst mode to operate properly Burst mode temporary (50 ms) locks EC to do only transactions with driver, without it some hardware returns abstract garbage. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=9341 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 63862dfe347b..445ecbabbe76 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -575,6 +575,8 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (bits != 8 && acpi_strict) return AE_BAD_PARAMETER; + acpi_ec_burst_enable(ec); + if (function == ACPI_READ) { result = acpi_ec_read(ec, address, &temp); *value = temp; @@ -594,6 +596,8 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, } } + acpi_ec_burst_disable(ec); + switch (result) { case -EINVAL: return AE_BAD_PARAMETER; From ad3399c378993152f12c23304ee56d7f9108e758 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 11 Jan 2008 00:10:38 +0100 Subject: [PATCH 021/112] ACPI: Fix acpi_pm_device_sleep_state() Fix acpi_pm_device_sleep_state() to return the value returned by _SxD if the device is supposed to wake up the system from given sleep state and the evaluation of _SxW fails (e.g. _SxW is not present). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 2c0b6630f8ba..99181c8f023e 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -386,11 +386,20 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) if (acpi_target_sleep_state == ACPI_STATE_S0 || (wake && adev->wakeup.state.enabled && adev->wakeup.sleep_state <= acpi_target_sleep_state)) { + acpi_status status; + acpi_method[3] = 'W'; - acpi_evaluate_integer(handle, acpi_method, NULL, &d_max); - /* Sanity check */ - if (d_max < d_min) + status = acpi_evaluate_integer(handle, acpi_method, NULL, + &d_max); + if (ACPI_FAILURE(status)) { + d_max = d_min; + } else if (d_max < d_min) { + /* Warn the user of the broken DSDT */ + printk(KERN_WARNING "ACPI: Wrong value from %s\n", + acpi_method); + /* Sanitize it */ d_min = d_max; + } } if (d_min_p) From 37748ebf8888aef6a252016d7c3cdc84514df051 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 6 Jun 2007 03:34:07 -0400 Subject: [PATCH 022/112] ACPI: remove P2B-S from blacklist. According to http://bugzilla.kernel.org/show_bug.cgi?id=6933 The latest BIOS for the P2B-S works fine. Remove it from the blacklist. Signed-off-by: Dave Jones Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 3ec110ce00c8..7c24a8dafde6 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -67,8 +67,6 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = { /* IBM 600E - _ADR should return 7, but it returns 1 */ {"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal, "Incorrect _ADR", 1}, - {"ASUS\0\0", "P2B-S ", 0, ACPI_SIG_DSDT, all_versions, - "Bogus PCI routing", 1}, {""} }; From 856608ee5e1ea37b8976ce01ddbd19a45da88921 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sat, 12 Jan 2008 19:37:49 -0500 Subject: [PATCH 023/112] pnp: Failed to activate device 00:0a - Samsung P35 XVM 1600 III PNP_WRITE requires protocol supports .set. If ACPI doesn't support _SRS, .set ismeanless, so PNP_WRITE. Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index dada89906314..662b4c279cfc 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -183,7 +183,7 @@ static int __init pnpacpi_add_device(struct acpi_device *device) if (ACPI_SUCCESS(status)) dev->capabilities |= PNP_CONFIGURABLE; dev->capabilities |= PNP_READ; - if (device->flags.dynamic_status) + if (device->flags.dynamic_status && (dev->capabilities & PNP_CONFIGURABLE)) dev->capabilities |= PNP_WRITE; if (device->flags.removable) dev->capabilities |= PNP_REMOVABLE; From 02f8a8586574350a1f3c2cee79cbc0faf630961d Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Tue, 22 Jan 2008 17:18:22 -0700 Subject: [PATCH 024/112] ACPI: Check for any matching CID when walking namespace. The callback function acpi_ns_get_device_callback called from acpi_get_devices() will check CID's if the HID does not match. This code has a bug where it requires that all CIDs match the HID. Changed the code so that any CID match will do. Signed-off-by: Andrew Patterson Signed-off-by: Len Brown --- drivers/acpi/namespace/nsxfeval.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c index f39fbc6b9237..b92133faf5b7 100644 --- a/drivers/acpi/namespace/nsxfeval.c +++ b/drivers/acpi/namespace/nsxfeval.c @@ -443,6 +443,7 @@ acpi_ns_get_device_callback(acpi_handle obj_handle, struct acpica_device_id hid; struct acpi_compatible_id_list *cid; acpi_native_uint i; + int found; status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { @@ -496,16 +497,19 @@ acpi_ns_get_device_callback(acpi_handle obj_handle, /* Walk the CID list */ + found = 0; for (i = 0; i < cid->count; i++) { if (ACPI_STRNCMP(cid->id[i].value, info->hid, sizeof(struct - acpi_compatible_id)) != + acpi_compatible_id)) == 0) { - ACPI_FREE(cid); - return (AE_OK); + found = 1; + break; } } ACPI_FREE(cid); + if (!found) + return (AE_OK); } } From 75a1f9ce8f422fd32774a0674ed4386d07628d5e Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Mon, 14 Jan 2008 18:05:41 +0900 Subject: [PATCH 025/112] sony-laptop: printk more info in sony_pic_call[123] Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index b0f68031b49d..0435b3d64163 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1451,7 +1451,7 @@ static u8 sony_pic_call1(u8 dev) outb(dev, spic_dev.cur_ioport->io1.minimum + 4); v1 = inb_p(spic_dev.cur_ioport->io1.minimum + 4); v2 = inb_p(spic_dev.cur_ioport->io1.minimum); - dprintk("sony_pic_call1: 0x%.4x\n", (v2 << 8) | v1); + dprintk("sony_pic_call1(0x%.2x): 0x%.4x\n", dev, (v2 << 8) | v1); return v2; } @@ -1466,7 +1466,7 @@ static u8 sony_pic_call2(u8 dev, u8 fn) ITERATIONS_LONG); outb(fn, spic_dev.cur_ioport->io1.minimum); v1 = inb_p(spic_dev.cur_ioport->io1.minimum); - dprintk("sony_pic_call2: 0x%.4x\n", v1); + dprintk("sony_pic_call2(0x%.2x - 0x%.2x): 0x%.4x\n", dev, fn, v1); return v1; } @@ -1481,7 +1481,8 @@ static u8 sony_pic_call3(u8 dev, u8 fn, u8 v) wait_on_command(inb_p(spic_dev.cur_ioport->io1.minimum + 4) & 2, ITERATIONS_LONG); outb(v, spic_dev.cur_ioport->io1.minimum); v1 = inb_p(spic_dev.cur_ioport->io1.minimum); - dprintk("sony_pic_call3: 0x%.4x\n", v1); + dprintk("sony_pic_call3(0x%.2x - 0x%.2x - 0x%.2x): 0x%.4x\n", + dev, fn, v, v1); return v1; } From 88877c2a2ebd0e554496efb23e7dc8ade661d289 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Mon, 14 Jan 2008 18:05:42 +0900 Subject: [PATCH 026/112] sony-laptop: Add Vaio N series to the special init sequence to enable Fn keys Also the recent Vaio N series need some more calls into the DSDT to enable reporting of FN key events to be delivered to the SNC device. Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 0435b3d64163..7a32b355869b 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -875,6 +875,15 @@ static const struct dmi_system_id sony_nc_ids[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VGN-C"), }, }, + { + .ident = "Sony Vaio N Series", + .callback = sony_nc_C_enable, + .driver_data = sony_C_events, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-N"), + }, + }, { } }; From de9204300112dea10ca3d3cc76858cee61043e47 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Mon, 14 Jan 2008 18:05:43 +0900 Subject: [PATCH 027/112] sony-laptop: refactor model types Create mini drivers and allow callbacks for each model to be specified. Following patches will make use of this feature to handle specific cases instead of just executing code and hope not to break other models. Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 186 +++++++++++++++++++++---------------- 1 file changed, 104 insertions(+), 82 deletions(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 7a32b355869b..a650f25d76c5 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1194,18 +1194,33 @@ struct sony_pic_irq { struct list_head list; }; +struct sonypi_eventtypes { + u8 data; + unsigned long mask; + struct sonypi_event *events; +}; + +struct device_ctrl { + int model; + int (*handle_irq)(void); + u16 evport_offset; + u8 has_camera; + u8 has_bluetooth; + u8 has_wwan; + struct sonypi_eventtypes *event_types; +}; + struct sony_pic_dev { - int model; - u16 evport_offset; - u8 camera_power; - u8 bluetooth_power; - u8 wwan_power; + struct device_ctrl *control; struct acpi_device *acpi_dev; struct sony_pic_irq *cur_irq; struct sony_pic_ioport *cur_ioport; struct list_head interrupts; struct list_head ioports; struct mutex lock; + u8 camera_power; + u8 bluetooth_power; + u8 wwan_power; }; static struct sony_pic_dev spic_dev = { @@ -1370,74 +1385,92 @@ static struct sonypi_event sonypi_batteryev[] = { { 0, 0 } }; -static struct sonypi_eventtypes { - int model; - u8 data; - unsigned long mask; - struct sonypi_event * events; -} sony_pic_eventtypes[] = { - { SONYPI_DEVICE_TYPE1, 0, 0xffffffff, sonypi_releaseev }, - { SONYPI_DEVICE_TYPE1, 0x70, SONYPI_MEYE_MASK, sonypi_meyeev }, - { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_LID_MASK, sonypi_lidev }, - { SONYPI_DEVICE_TYPE1, 0x60, SONYPI_CAPTURE_MASK, sonypi_captureev }, - { SONYPI_DEVICE_TYPE1, 0x10, SONYPI_JOGGER_MASK, sonypi_joggerev }, - { SONYPI_DEVICE_TYPE1, 0x20, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, - { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_BLUETOOTH_MASK, sonypi_blueev }, - { SONYPI_DEVICE_TYPE1, 0x40, SONYPI_PKEY_MASK, sonypi_pkeyev }, - { SONYPI_DEVICE_TYPE1, 0x30, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, - { SONYPI_DEVICE_TYPE1, 0x40, SONYPI_BATTERY_MASK, sonypi_batteryev }, - - { SONYPI_DEVICE_TYPE2, 0, 0xffffffff, sonypi_releaseev }, - { SONYPI_DEVICE_TYPE2, 0x38, SONYPI_LID_MASK, sonypi_lidev }, - { SONYPI_DEVICE_TYPE2, 0x11, SONYPI_JOGGER_MASK, sonypi_joggerev }, - { SONYPI_DEVICE_TYPE2, 0x61, SONYPI_CAPTURE_MASK, sonypi_captureev }, - { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, - { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_BLUETOOTH_MASK, sonypi_blueev }, - { SONYPI_DEVICE_TYPE2, 0x08, SONYPI_PKEY_MASK, sonypi_pkeyev }, - { SONYPI_DEVICE_TYPE2, 0x11, SONYPI_BACK_MASK, sonypi_backev }, - { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_HELP_MASK, sonypi_helpev }, - { SONYPI_DEVICE_TYPE2, 0x21, SONYPI_ZOOM_MASK, sonypi_zoomev }, - { SONYPI_DEVICE_TYPE2, 0x20, SONYPI_THUMBPHRASE_MASK, sonypi_thumbphraseev }, - { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, - { SONYPI_DEVICE_TYPE2, 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev }, - { SONYPI_DEVICE_TYPE2, 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev }, - - { SONYPI_DEVICE_TYPE3, 0, 0xffffffff, sonypi_releaseev }, - { SONYPI_DEVICE_TYPE3, 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, - { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_WIRELESS_MASK, sonypi_wlessev }, - { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, - { SONYPI_DEVICE_TYPE3, 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev }, - { SONYPI_DEVICE_TYPE3, 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev }, - { 0 } +static struct sonypi_eventtypes type1_events[] = { + { 0, 0xffffffff, sonypi_releaseev }, + { 0x70, SONYPI_MEYE_MASK, sonypi_meyeev }, + { 0x30, SONYPI_LID_MASK, sonypi_lidev }, + { 0x60, SONYPI_CAPTURE_MASK, sonypi_captureev }, + { 0x10, SONYPI_JOGGER_MASK, sonypi_joggerev }, + { 0x20, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, + { 0x30, SONYPI_BLUETOOTH_MASK, sonypi_blueev }, + { 0x40, SONYPI_PKEY_MASK, sonypi_pkeyev }, + { 0x30, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, + { 0x40, SONYPI_BATTERY_MASK, sonypi_batteryev }, + { 0 }, +}; +static struct sonypi_eventtypes type2_events[] = { + { 0, 0xffffffff, sonypi_releaseev }, + { 0x38, SONYPI_LID_MASK, sonypi_lidev }, + { 0x11, SONYPI_JOGGER_MASK, sonypi_joggerev }, + { 0x61, SONYPI_CAPTURE_MASK, sonypi_captureev }, + { 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, + { 0x31, SONYPI_BLUETOOTH_MASK, sonypi_blueev }, + { 0x08, SONYPI_PKEY_MASK, sonypi_pkeyev }, + { 0x11, SONYPI_BACK_MASK, sonypi_backev }, + { 0x21, SONYPI_HELP_MASK, sonypi_helpev }, + { 0x21, SONYPI_ZOOM_MASK, sonypi_zoomev }, + { 0x20, SONYPI_THUMBPHRASE_MASK, sonypi_thumbphraseev }, + { 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, + { 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev }, + { 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev }, + { 0 }, +}; +static struct sonypi_eventtypes type3_events[] = { + { 0, 0xffffffff, sonypi_releaseev }, + { 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, + { 0x31, SONYPI_WIRELESS_MASK, sonypi_wlessev }, + { 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, + { 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev }, + { 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev }, + { 0 }, }; -static int sony_pic_detect_device_type(void) +static struct device_ctrl spic_types[] = { + { + .model = SONYPI_DEVICE_TYPE1, + .handle_irq = NULL, + .evport_offset = SONYPI_TYPE1_OFFSET, + .event_types = type1_events, + }, + { + .model = SONYPI_DEVICE_TYPE2, + .handle_irq = NULL, + .evport_offset = SONYPI_TYPE2_OFFSET, + .event_types = type2_events, + }, + { + .model = SONYPI_DEVICE_TYPE3, + .handle_irq = NULL, + .evport_offset = SONYPI_TYPE3_OFFSET, + .event_types = type3_events, + }, +}; + +static void sony_pic_detect_device_type(struct sony_pic_dev *dev) { struct pci_dev *pcidev; - int model = 0; if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, NULL))) - model = SONYPI_DEVICE_TYPE1; + dev->control = &spic_types[0]; else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, NULL))) - model = SONYPI_DEVICE_TYPE3; + dev->control = &spic_types[2]; else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, NULL))) - model = SONYPI_DEVICE_TYPE3; + dev->control = &spic_types[2]; else - model = SONYPI_DEVICE_TYPE2; + dev->control = &spic_types[1]; if (pcidev) pci_dev_put(pcidev); printk(KERN_INFO DRV_PFX "detected Type%d model\n", - model == SONYPI_DEVICE_TYPE1 ? 1 : - model == SONYPI_DEVICE_TYPE2 ? 2 : 3); - return model; + dev->control->model == SONYPI_DEVICE_TYPE1 ? 1 : + dev->control->model == SONYPI_DEVICE_TYPE2 ? 2 : 3); } #define ITERATIONS_LONG 10000 @@ -2263,7 +2296,7 @@ static int sony_pic_enable(struct acpi_device *device, buffer.pointer = resource; /* setup Type 1 resources */ - if (spic_dev.model == SONYPI_DEVICE_TYPE1) { + if (spic_dev.control->model == SONYPI_DEVICE_TYPE1) { /* setup io resources */ resource->res1.type = ACPI_RESOURCE_TYPE_IO; @@ -2345,39 +2378,42 @@ static irqreturn_t sony_pic_irq(int irq, void *dev_id) if (dev->cur_ioport->io2.minimum) data_mask = inb_p(dev->cur_ioport->io2.minimum); else - data_mask = inb_p(dev->cur_ioport->io1.minimum + dev->evport_offset); + data_mask = inb_p(dev->cur_ioport->io1.minimum + + dev->control->evport_offset); dprintk("event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n", - ev, data_mask, dev->cur_ioport->io1.minimum, dev->evport_offset); + ev, data_mask, dev->cur_ioport->io1.minimum, + dev->control->evport_offset); if (ev == 0x00 || ev == 0xff) return IRQ_HANDLED; - for (i = 0; sony_pic_eventtypes[i].model; i++) { + for (i = 0; dev->control->event_types[i].mask; i++) { - if (spic_dev.model != sony_pic_eventtypes[i].model) + if ((data_mask & dev->control->event_types[i].data) != + dev->control->event_types[i].data) continue; - if ((data_mask & sony_pic_eventtypes[i].data) != - sony_pic_eventtypes[i].data) + if (!(mask & dev->control->event_types[i].mask)) continue; - if (!(mask & sony_pic_eventtypes[i].mask)) - continue; - - for (j = 0; sony_pic_eventtypes[i].events[j].event; j++) { - if (ev == sony_pic_eventtypes[i].events[j].data) { + for (j = 0; dev->control->event_types[i].events[j].event; j++) { + if (ev == dev->control->event_types[i].events[j].data) { device_event = - sony_pic_eventtypes[i].events[j].event; + dev->control-> + event_types[i].events[j].event; goto found; } } } + dprintk("unknown event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n", + ev, data_mask, dev->cur_ioport->io1.minimum, + dev->control->evport_offset); return IRQ_HANDLED; found: sony_laptop_report_input_event(device_event); - acpi_bus_generate_proc_event(spic_dev.acpi_dev, 1, device_event); + acpi_bus_generate_proc_event(dev->acpi_dev, 1, device_event); sonypi_compat_report_event(device_event); return IRQ_HANDLED; @@ -2439,23 +2475,9 @@ static int sony_pic_add(struct acpi_device *device) spic_dev.acpi_dev = device; strcpy(acpi_device_class(device), "sony/hotkey"); - spic_dev.model = sony_pic_detect_device_type(); + sony_pic_detect_device_type(&spic_dev); mutex_init(&spic_dev.lock); - /* model specific characteristics */ - switch(spic_dev.model) { - case SONYPI_DEVICE_TYPE1: - spic_dev.evport_offset = SONYPI_TYPE1_OFFSET; - break; - case SONYPI_DEVICE_TYPE3: - spic_dev.evport_offset = SONYPI_TYPE3_OFFSET; - break; - case SONYPI_DEVICE_TYPE2: - default: - spic_dev.evport_offset = SONYPI_TYPE2_OFFSET; - break; - } - /* read _PRS resources */ result = sony_pic_possible_resources(device); if (result) { From 425ef5d75de25c53b6dc79008fe3678d2fe7e8ed Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Mon, 14 Jan 2008 18:05:44 +0900 Subject: [PATCH 028/112] sony-laptop: bump version to 0.6 Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index a650f25d76c5..98692862fbc3 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -73,7 +73,7 @@ if (debug) printk(KERN_WARNING DRV_PFX msg); \ } while (0) -#define SONY_LAPTOP_DRIVER_VERSION "0.5" +#define SONY_LAPTOP_DRIVER_VERSION "0.6" #define SONY_NC_CLASS "sony-nc" #define SONY_NC_HID "SNY5001" From 3eb8749a37990b505ab94466038c067444bbd7eb Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Mon, 14 Jan 2008 18:05:45 +0900 Subject: [PATCH 029/112] sony-laptop: add Type4 model Recent Vaio models (UX, SZ and presumably TZ and others) add more events and a slightly different handling of Fn key events for additional hotkeys (s1, s2, zoom-in/out, etc.). Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 295 +++++++++++++++++++++++-------------- include/linux/sonypi.h | 2 + 2 files changed, 186 insertions(+), 111 deletions(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 98692862fbc3..70d5cc5969aa 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -146,68 +146,70 @@ struct sony_laptop_keypress { * and input layer indexes in the keymap */ static int sony_laptop_input_index[] = { - -1, /* no event */ - -1, /* SONYPI_EVENT_JOGDIAL_DOWN */ - -1, /* SONYPI_EVENT_JOGDIAL_UP */ - -1, /* SONYPI_EVENT_JOGDIAL_DOWN_PRESSED */ - -1, /* SONYPI_EVENT_JOGDIAL_UP_PRESSED */ - -1, /* SONYPI_EVENT_JOGDIAL_PRESSED */ - -1, /* SONYPI_EVENT_JOGDIAL_RELEASED */ - 0, /* SONYPI_EVENT_CAPTURE_PRESSED */ - 1, /* SONYPI_EVENT_CAPTURE_RELEASED */ - 2, /* SONYPI_EVENT_CAPTURE_PARTIALPRESSED */ - 3, /* SONYPI_EVENT_CAPTURE_PARTIALRELEASED */ - 4, /* SONYPI_EVENT_FNKEY_ESC */ - 5, /* SONYPI_EVENT_FNKEY_F1 */ - 6, /* SONYPI_EVENT_FNKEY_F2 */ - 7, /* SONYPI_EVENT_FNKEY_F3 */ - 8, /* SONYPI_EVENT_FNKEY_F4 */ - 9, /* SONYPI_EVENT_FNKEY_F5 */ - 10, /* SONYPI_EVENT_FNKEY_F6 */ - 11, /* SONYPI_EVENT_FNKEY_F7 */ - 12, /* SONYPI_EVENT_FNKEY_F8 */ - 13, /* SONYPI_EVENT_FNKEY_F9 */ - 14, /* SONYPI_EVENT_FNKEY_F10 */ - 15, /* SONYPI_EVENT_FNKEY_F11 */ - 16, /* SONYPI_EVENT_FNKEY_F12 */ - 17, /* SONYPI_EVENT_FNKEY_1 */ - 18, /* SONYPI_EVENT_FNKEY_2 */ - 19, /* SONYPI_EVENT_FNKEY_D */ - 20, /* SONYPI_EVENT_FNKEY_E */ - 21, /* SONYPI_EVENT_FNKEY_F */ - 22, /* SONYPI_EVENT_FNKEY_S */ - 23, /* SONYPI_EVENT_FNKEY_B */ - 24, /* SONYPI_EVENT_BLUETOOTH_PRESSED */ - 25, /* SONYPI_EVENT_PKEY_P1 */ - 26, /* SONYPI_EVENT_PKEY_P2 */ - 27, /* SONYPI_EVENT_PKEY_P3 */ - 28, /* SONYPI_EVENT_BACK_PRESSED */ - -1, /* SONYPI_EVENT_LID_CLOSED */ - -1, /* SONYPI_EVENT_LID_OPENED */ - 29, /* SONYPI_EVENT_BLUETOOTH_ON */ - 30, /* SONYPI_EVENT_BLUETOOTH_OFF */ - 31, /* SONYPI_EVENT_HELP_PRESSED */ - 32, /* SONYPI_EVENT_FNKEY_ONLY */ - 33, /* SONYPI_EVENT_JOGDIAL_FAST_DOWN */ - 34, /* SONYPI_EVENT_JOGDIAL_FAST_UP */ - 35, /* SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED */ - 36, /* SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED */ - 37, /* SONYPI_EVENT_JOGDIAL_VFAST_DOWN */ - 38, /* SONYPI_EVENT_JOGDIAL_VFAST_UP */ - 39, /* SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED */ - 40, /* SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED */ - 41, /* SONYPI_EVENT_ZOOM_PRESSED */ - 42, /* SONYPI_EVENT_THUMBPHRASE_PRESSED */ - 43, /* SONYPI_EVENT_MEYE_FACE */ - 44, /* SONYPI_EVENT_MEYE_OPPOSITE */ - 45, /* SONYPI_EVENT_MEMORYSTICK_INSERT */ - 46, /* SONYPI_EVENT_MEMORYSTICK_EJECT */ - -1, /* SONYPI_EVENT_ANYBUTTON_RELEASED */ - -1, /* SONYPI_EVENT_BATTERY_INSERT */ - -1, /* SONYPI_EVENT_BATTERY_REMOVE */ - -1, /* SONYPI_EVENT_FNKEY_RELEASED */ - 47, /* SONYPI_EVENT_WIRELESS_ON */ - 48, /* SONYPI_EVENT_WIRELESS_OFF */ + -1, /* 0 no event */ + -1, /* 1 SONYPI_EVENT_JOGDIAL_DOWN */ + -1, /* 2 SONYPI_EVENT_JOGDIAL_UP */ + -1, /* 3 SONYPI_EVENT_JOGDIAL_DOWN_PRESSED */ + -1, /* 4 SONYPI_EVENT_JOGDIAL_UP_PRESSED */ + -1, /* 5 SONYPI_EVENT_JOGDIAL_PRESSED */ + -1, /* 6 SONYPI_EVENT_JOGDIAL_RELEASED */ + 0, /* 7 SONYPI_EVENT_CAPTURE_PRESSED */ + 1, /* 8 SONYPI_EVENT_CAPTURE_RELEASED */ + 2, /* 9 SONYPI_EVENT_CAPTURE_PARTIALPRESSED */ + 3, /* 10 SONYPI_EVENT_CAPTURE_PARTIALRELEASED */ + 4, /* 11 SONYPI_EVENT_FNKEY_ESC */ + 5, /* 12 SONYPI_EVENT_FNKEY_F1 */ + 6, /* 13 SONYPI_EVENT_FNKEY_F2 */ + 7, /* 14 SONYPI_EVENT_FNKEY_F3 */ + 8, /* 15 SONYPI_EVENT_FNKEY_F4 */ + 9, /* 16 SONYPI_EVENT_FNKEY_F5 */ + 10, /* 17 SONYPI_EVENT_FNKEY_F6 */ + 11, /* 18 SONYPI_EVENT_FNKEY_F7 */ + 12, /* 19 SONYPI_EVENT_FNKEY_F8 */ + 13, /* 20 SONYPI_EVENT_FNKEY_F9 */ + 14, /* 21 SONYPI_EVENT_FNKEY_F10 */ + 15, /* 22 SONYPI_EVENT_FNKEY_F11 */ + 16, /* 23 SONYPI_EVENT_FNKEY_F12 */ + 17, /* 24 SONYPI_EVENT_FNKEY_1 */ + 18, /* 25 SONYPI_EVENT_FNKEY_2 */ + 19, /* 26 SONYPI_EVENT_FNKEY_D */ + 20, /* 27 SONYPI_EVENT_FNKEY_E */ + 21, /* 28 SONYPI_EVENT_FNKEY_F */ + 22, /* 29 SONYPI_EVENT_FNKEY_S */ + 23, /* 30 SONYPI_EVENT_FNKEY_B */ + 24, /* 31 SONYPI_EVENT_BLUETOOTH_PRESSED */ + 25, /* 32 SONYPI_EVENT_PKEY_P1 */ + 26, /* 33 SONYPI_EVENT_PKEY_P2 */ + 27, /* 34 SONYPI_EVENT_PKEY_P3 */ + 28, /* 35 SONYPI_EVENT_BACK_PRESSED */ + -1, /* 36 SONYPI_EVENT_LID_CLOSED */ + -1, /* 37 SONYPI_EVENT_LID_OPENED */ + 29, /* 38 SONYPI_EVENT_BLUETOOTH_ON */ + 30, /* 39 SONYPI_EVENT_BLUETOOTH_OFF */ + 31, /* 40 SONYPI_EVENT_HELP_PRESSED */ + 32, /* 41 SONYPI_EVENT_FNKEY_ONLY */ + 33, /* 42 SONYPI_EVENT_JOGDIAL_FAST_DOWN */ + 34, /* 43 SONYPI_EVENT_JOGDIAL_FAST_UP */ + 35, /* 44 SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED */ + 36, /* 45 SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED */ + 37, /* 46 SONYPI_EVENT_JOGDIAL_VFAST_DOWN */ + 38, /* 47 SONYPI_EVENT_JOGDIAL_VFAST_UP */ + 39, /* 48 SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED */ + 40, /* 49 SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED */ + 41, /* 50 SONYPI_EVENT_ZOOM_PRESSED */ + 42, /* 51 SONYPI_EVENT_THUMBPHRASE_PRESSED */ + 43, /* 52 SONYPI_EVENT_MEYE_FACE */ + 44, /* 53 SONYPI_EVENT_MEYE_OPPOSITE */ + 45, /* 54 SONYPI_EVENT_MEMORYSTICK_INSERT */ + 46, /* 55 SONYPI_EVENT_MEMORYSTICK_EJECT */ + -1, /* 56 SONYPI_EVENT_ANYBUTTON_RELEASED */ + -1, /* 57 SONYPI_EVENT_BATTERY_INSERT */ + -1, /* 58 SONYPI_EVENT_BATTERY_REMOVE */ + -1, /* 59 SONYPI_EVENT_FNKEY_RELEASED */ + 47, /* 60 SONYPI_EVENT_WIRELESS_ON */ + 48, /* 61 SONYPI_EVENT_WIRELESS_OFF */ + 49, /* 62 SONYPI_EVENT_ZOOM_IN_PRESSED */ + 50, /* 63 SONYPI_EVENT_ZOOM_OUT_PRESSED */ }; static int sony_laptop_input_keycode_map[] = { @@ -260,6 +262,8 @@ static int sony_laptop_input_keycode_map[] = { KEY_RESERVED, /* 46 SONYPI_EVENT_MEMORYSTICK_EJECT */ KEY_WLAN, /* 47 SONYPI_EVENT_WIRELESS_ON */ KEY_WLAN, /* 48 SONYPI_EVENT_WIRELESS_OFF */ + KEY_ZOOMIN, /* 49 SONYPI_EVENT_ZOOM_IN_PRESSED */ + KEY_ZOOMOUT /* 50 SONYPI_EVENT_ZOOM_OUT_PRESSED */ }; /* release buttons after a short delay if pressed */ @@ -1178,10 +1182,12 @@ static struct acpi_driver sony_nc_driver = { #define SONYPI_DEVICE_TYPE1 0x00000001 #define SONYPI_DEVICE_TYPE2 0x00000002 #define SONYPI_DEVICE_TYPE3 0x00000004 +#define SONYPI_DEVICE_TYPE4 0x00000008 #define SONYPI_TYPE1_OFFSET 0x04 #define SONYPI_TYPE2_OFFSET 0x12 #define SONYPI_TYPE3_OFFSET 0x12 +#define SONYPI_TYPE4_OFFSET 0x12 struct sony_pic_ioport { struct acpi_resource_io io1; @@ -1202,7 +1208,7 @@ struct sonypi_eventtypes { struct device_ctrl { int model; - int (*handle_irq)(void); + int (*handle_irq)(const u8, const u8); u16 evport_offset; u8 has_camera; u8 has_bluetooth; @@ -1277,6 +1283,7 @@ static struct sonypi_event sonypi_joggerev[] = { static struct sonypi_event sonypi_captureev[] = { { 0x05, SONYPI_EVENT_CAPTURE_PARTIALPRESSED }, { 0x07, SONYPI_EVENT_CAPTURE_PRESSED }, + { 0x40, SONYPI_EVENT_CAPTURE_PRESSED }, { 0x01, SONYPI_EVENT_CAPTURE_PARTIALRELEASED }, { 0, 0 } }; @@ -1313,7 +1320,6 @@ static struct sonypi_event sonypi_pkeyev[] = { { 0x01, SONYPI_EVENT_PKEY_P1 }, { 0x02, SONYPI_EVENT_PKEY_P2 }, { 0x04, SONYPI_EVENT_PKEY_P3 }, - { 0x5c, SONYPI_EVENT_PKEY_P1 }, { 0, 0 } }; @@ -1355,6 +1361,8 @@ static struct sonypi_event sonypi_lidev[] = { /* The set of possible zoom events */ static struct sonypi_event sonypi_zoomev[] = { { 0x39, SONYPI_EVENT_ZOOM_PRESSED }, + { 0x10, SONYPI_EVENT_ZOOM_IN_PRESSED }, + { 0x20, SONYPI_EVENT_ZOOM_OUT_PRESSED }, { 0, 0 } }; @@ -1424,55 +1432,19 @@ static struct sonypi_eventtypes type3_events[] = { { 0x31, SONYPI_PKEY_MASK, sonypi_pkeyev }, { 0 }, }; - -static struct device_ctrl spic_types[] = { - { - .model = SONYPI_DEVICE_TYPE1, - .handle_irq = NULL, - .evport_offset = SONYPI_TYPE1_OFFSET, - .event_types = type1_events, - }, - { - .model = SONYPI_DEVICE_TYPE2, - .handle_irq = NULL, - .evport_offset = SONYPI_TYPE2_OFFSET, - .event_types = type2_events, - }, - { - .model = SONYPI_DEVICE_TYPE3, - .handle_irq = NULL, - .evport_offset = SONYPI_TYPE3_OFFSET, - .event_types = type3_events, - }, +static struct sonypi_eventtypes type4_events[] = { + { 0, 0xffffffff, sonypi_releaseev }, + { 0x21, SONYPI_FNKEY_MASK, sonypi_fnkeyev }, + { 0x31, SONYPI_WIRELESS_MASK, sonypi_wlessev }, + { 0x31, SONYPI_MEMORYSTICK_MASK, sonypi_memorystickev }, + { 0x41, SONYPI_BATTERY_MASK, sonypi_batteryev }, + { 0x05, SONYPI_PKEY_MASK, sonypi_pkeyev }, + { 0x05, SONYPI_ZOOM_MASK, sonypi_zoomev }, + { 0x05, SONYPI_CAPTURE_MASK, sonypi_captureev }, + { 0 }, }; -static void sony_pic_detect_device_type(struct sony_pic_dev *dev) -{ - struct pci_dev *pcidev; - - if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, NULL))) - dev->control = &spic_types[0]; - - else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_ICH6_1, NULL))) - dev->control = &spic_types[2]; - - else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_ICH7_1, NULL))) - dev->control = &spic_types[2]; - - else - dev->control = &spic_types[1]; - - if (pcidev) - pci_dev_put(pcidev); - - printk(KERN_INFO DRV_PFX "detected Type%d model\n", - dev->control->model == SONYPI_DEVICE_TYPE1 ? 1 : - dev->control->model == SONYPI_DEVICE_TYPE2 ? 2 : 3); -} - +/* low level spic calls */ #define ITERATIONS_LONG 10000 #define ITERATIONS_SHORT 10 #define wait_on_command(command, iterations) { \ @@ -1528,6 +1500,100 @@ static u8 sony_pic_call3(u8 dev, u8 fn, u8 v) return v1; } +/* + * minidrivers for SPIC models + */ +static int type4_handle_irq(const u8 data_mask, const u8 ev) +{ + /* + * 0x31 could mean we have to take some extra action and wait for + * the next irq for some Type4 models, it will generate a new + * irq and we can read new data from the device: + * - 0x5c and 0x5f requires 0xA0 + * - 0x61 requires 0xB3 + */ + if (data_mask == 0x31) { + if (ev == 0x5c || ev == 0x5f) + sony_pic_call1(0xA0); + else if (ev == 0x61) + sony_pic_call1(0xB3); + return 0; + } + return 1; +} + +static struct device_ctrl spic_types[] = { + { + .model = SONYPI_DEVICE_TYPE1, + .handle_irq = NULL, + .evport_offset = SONYPI_TYPE1_OFFSET, + .event_types = type1_events, + }, + { + .model = SONYPI_DEVICE_TYPE2, + .handle_irq = NULL, + .evport_offset = SONYPI_TYPE2_OFFSET, + .event_types = type2_events, + }, + { + .model = SONYPI_DEVICE_TYPE3, + .handle_irq = NULL, + .evport_offset = SONYPI_TYPE3_OFFSET, + .event_types = type3_events, + }, + { + .model = SONYPI_DEVICE_TYPE4, + .handle_irq = type4_handle_irq, + .evport_offset = SONYPI_TYPE4_OFFSET, + .event_types = type4_events, + }, +}; + +static void sony_pic_detect_device_type(struct sony_pic_dev *dev) +{ + struct pci_dev *pcidev; + + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_3, NULL); + if (pcidev) { + dev->control = &spic_types[0]; + goto out; + } + + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_ICH6_1, NULL); + if (pcidev) { + dev->control = &spic_types[2]; + goto out; + } + + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_ICH7_1, NULL); + if (pcidev) { + dev->control = &spic_types[3]; + goto out; + } + + pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_ICH8_4, NULL); + if (pcidev) { + dev->control = &spic_types[3]; + goto out; + } + + /* default */ + dev->control = &spic_types[1]; + +out: + if (pcidev) + pci_dev_put(pcidev); + + printk(KERN_INFO DRV_PFX "detected Type%d model\n", + dev->control->model == SONYPI_DEVICE_TYPE1 ? 1 : + dev->control->model == SONYPI_DEVICE_TYPE2 ? 2 : + dev->control->model == SONYPI_DEVICE_TYPE3 ? 3 : 4); +} + /* camera tests and poweron/poweroff */ #define SONYPI_CAMERA_PICTURE 5 #define SONYPI_CAMERA_CONTROL 0x10 @@ -2406,6 +2472,13 @@ static irqreturn_t sony_pic_irq(int irq, void *dev_id) } } } + /* Still not able to decode the event try to pass + * it over to the minidriver + */ + if (dev->control->handle_irq && + dev->control->handle_irq(data_mask, ev) == 0) + return IRQ_HANDLED; + dprintk("unknown event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n", ev, data_mask, dev->cur_ioport->io1.minimum, dev->control->evport_offset); diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index 40c7b5d993b9..f41ffd7c2dd9 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -101,6 +101,8 @@ #define SONYPI_EVENT_FNKEY_RELEASED 59 #define SONYPI_EVENT_WIRELESS_ON 60 #define SONYPI_EVENT_WIRELESS_OFF 61 +#define SONYPI_EVENT_ZOOM_IN_PRESSED 62 +#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63 /* get/set brightness */ #define SONYPI_IOCGBRT _IOR('v', 0, __u8) From fccd5d00ba68455425a35f905fd92538429c310d Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Mon, 14 Jan 2008 18:05:46 +0900 Subject: [PATCH 030/112] sony-laptop: fix scancode decode compare against the sony_laptop specific event list index to decode the input scancode to send. Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 70d5cc5969aa..899e3f75f288 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -315,7 +315,7 @@ static void sony_laptop_report_input_event(u8 event) break; default: - if (event > ARRAY_SIZE (sony_laptop_input_keycode_map)) { + if (event > ARRAY_SIZE(sony_laptop_input_index)) { dprintk("sony_laptop_report_input_event, event not known: %d\n", event); break; } From f757397097d0713c949af76dccabb65a2785782e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 31 Jan 2008 17:28:18 -0800 Subject: [PATCH 031/112] cpuidle: build fix for non-x86 Convert cpu_idle_wait() to cpuidle_kick_cpus() macro which is SMP-only, and gives error on non supported CPU. Signed-off-by: Kevin Hilman Acked-by: Venkatesh Pallipadi Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- arch/x86/Kconfig | 3 +++ drivers/cpuidle/cpuidle.c | 2 +- include/linux/cpuidle.h | 13 +++++++++++++ 3 files changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 368864dfe6eb..37d1297e6787 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -105,6 +105,9 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n +config ARCH_HAS_CPU_IDLE_WAIT + def_bool y + config GENERIC_CALIBRATE_DELAY def_bool y diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index d2fabe7863a9..794962d9f48b 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -82,7 +82,7 @@ void cpuidle_uninstall_idle_handler(void) { if (enabled_devices && (pm_idle != pm_idle_old)) { pm_idle = pm_idle_old; - cpu_idle_wait(); + cpuidle_kick_cpus(); } } diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 16a51546db44..cb95f5a9075a 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -72,6 +72,19 @@ cpuidle_set_statedata(struct cpuidle_state *state, void *data) state->driver_data = data; } +#ifdef CONFIG_SMP +#ifdef CONFIG_ARCH_HAS_CPU_IDLE_WAIT +static inline void cpuidle_kick_cpus(void) +{ + cpu_idle_wait(); +} +#else /* !CONFIG_ARCH_HAS_CPU_IDLE_WAIT */ +#error "Arch needs cpu_idle_wait() equivalent here" +#endif /* !CONFIG_ARCH_HAS_CPU_IDLE_WAIT */ +#else /* !CONFIG_SMP */ +static inline void cpuidle_kick_cpus(void) {} +#endif /* !CONFIG_SMP */ + struct cpuidle_state_kobj { struct cpuidle_state *state; struct completion kobj_unregister; From 0f089147e620e083f58a0e641f701bd4244b455b Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:38 -0200 Subject: [PATCH 032/112] ACPI: thinkpad-acpi: document keymap gotcha's (v2) Publish the requirements for keymap changes. This is a documentation change, only. Currently, people look at the thinkpad-acpi default keymaps, and think: "modifying this is a trivial thing, it can't break systems, and there are keys defined for foo and bar, but the driver has them as KEY_RESERVED. Must have been an oversight, let me change it." And since they never get to see the bug reports, because they are not really a part of the Linux ThinkPad users community (linux-thinkpad mailinglist, thinkwiki wiki, thinkpad forums) and laptop users are slow to complain to distros about any breakages... Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 68 +++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 5 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index cf56647a6ca4..7b1080f5843c 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -954,26 +954,67 @@ static struct attribute *hotkey_mask_attributes[] __initdata = { static int __init hotkey_init(struct ibm_init_struct *iibm) { - + /* Requirements for changing the default keymaps: + * + * 1. Many of the keys are mapped to KEY_RESERVED for very + * good reasons. Do not change them unless you have deep + * knowledge on the IBM and Lenovo ThinkPad firmware for + * the various ThinkPad models. The driver behaves + * differently for KEY_RESERVED: such keys have their + * hot key mask *unset* in mask_recommended, and also + * in the initial hot key mask programmed into the + * firmware at driver load time, which means the firm- + * ware may react very differently if you change them to + * something else; + * + * 2. You must be subscribed to the linux-thinkpad and + * ibm-acpi-devel mailing lists, and you should read the + * list archives since 2007 if you want to change the + * keymaps. This requirement exists so that you will + * know the past history of problems with the thinkpad- + * acpi driver keymaps, and also that you will be + * listening to any bug reports; + * + * 3. Do not send thinkpad-acpi specific patches directly to + * for merging, *ever*. Send them to the linux-acpi + * mailinglist for comments. Merging is to be done only + * through acpi-test and the ACPI maintainer. + * + * If the above is too much to ask, don't change the keymap. + * Ask the thinkpad-acpi maintainer to do it, instead. + */ static u16 ibm_keycode_map[] __initdata = { /* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */ KEY_FN_F1, KEY_FN_F2, KEY_COFFEE, KEY_SLEEP, KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8, KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND, - /* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */ + + /* Scan codes 0x0C to 0x1F: Other ACPI HKEY hot keys */ KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ + + /* brightness: firmware always reacts to them, unless + * X.org did some tricks in the radeon BIOS scratch + * registers of *some* models */ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ - /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ KEY_RESERVED, /* 0x10: FN+END (brightness down) */ + + /* Thinklight: firmware always react to it */ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ + KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ + + /* Volume: firmware always react to it and reprograms + * the built-in *extra* mixer. Never map it to control + * another mixer by default. */ KEY_RESERVED, /* 0x14: VOLUME UP */ KEY_RESERVED, /* 0x15: VOLUME DOWN */ KEY_RESERVED, /* 0x16: MUTE */ + KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ + /* (assignments unknown, please report if found) */ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, @@ -983,20 +1024,37 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_FN_F1, KEY_COFFEE, KEY_BATTERY, KEY_SLEEP, KEY_WLAN, KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8, KEY_FN_F9, KEY_FN_F10, KEY_FN_F11, KEY_SUSPEND, - /* Scan codes 0x0C to 0x0F: Other ACPI HKEY hot keys */ + + /* Scan codes 0x0C to 0x1F: Other ACPI HKEY hot keys */ KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ + KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ - /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ KEY_RESERVED, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ + KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ + + /* Volume: z60/z61, T60 (BIOS version?): firmware always + * react to it and reprograms the built-in *extra* mixer. + * Never map it to control another mixer by default. + * + * T60?, T61, R60?, R61: firmware and EC tries to send + * these over the regular keyboard, so these are no-ops, + * but there are still weird bugs re. MUTE, so do not + * change unless you get test reports from all Lenovo + * models. May cause the BIOS to interfere with the + * HDA mixer. + */ KEY_RESERVED, /* 0x14: VOLUME UP */ KEY_RESERVED, /* 0x15: VOLUME DOWN */ KEY_RESERVED, /* 0x16: MUTE */ + KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ + /* (assignments unknown, please report if found) */ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, From b2c985e7eba858a1765db6d56bdd4df775f53633 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:39 -0200 Subject: [PATCH 033/112] ACPI: thinkpad-acpi: refactor hotkey_get and hotkey_set (v2) Refactor and organize the code a bit for the NVRAM polling support: 1. Split hotkey_get/set into hotkey_status_get/set and hotkey_mask_get/set; 2. Cache the status of hot key mask for later driver use; 3. Make sure the cache of hot key mask is refreshed when needed; 4. log a printk notice when the firmware doesn't set the hot key mask to exactly what we asked it to; 5. Add proper locking to the data structures. Only (4) should be user-noticeable, but there is a chance (5) fixes some unknown/unreported race conditions. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 184 +++++++++++++++++++++-------------- drivers/misc/thinkpad_acpi.h | 2 - 2 files changed, 109 insertions(+), 77 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 7b1080f5843c..49d4f4af759e 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -777,6 +777,7 @@ static int hotkey_orig_status; static u32 hotkey_orig_mask; static u32 hotkey_all_mask; static u32 hotkey_reserved_mask; +static u32 hotkey_mask; static u16 *hotkey_keycode_map; @@ -789,15 +790,76 @@ static int hotkey_get_wlsw(int *status) return 0; } +/* + * Call with hotkey_mutex held + */ +static int hotkey_mask_get(void) +{ + if (tp_features.hotkey_mask) { + if (!acpi_evalf(hkey_handle, &hotkey_mask, "DHKN", "d")) + return -EIO; + } + + return 0; +} + +/* + * Call with hotkey_mutex held + */ +static int hotkey_mask_set(u32 mask) +{ + int i; + int rc = 0; + + if (tp_features.hotkey_mask) { + for (i = 0; i < 32; i++) { + u32 m = 1 << i; + if (!acpi_evalf(hkey_handle, + NULL, "MHKM", "vdd", i + 1, + !!(mask & m))) { + rc = -EIO; + break; + } else { + hotkey_mask = (hotkey_mask & ~m) | (mask & m); + } + } + + /* hotkey_mask_get must be called unconditionally below */ + if (!hotkey_mask_get() && !rc && hotkey_mask != mask) { + printk(IBM_NOTICE + "requested hot key mask 0x%08x, but " + "firmware forced it to 0x%08x\n", + mask, hotkey_mask); + } + } + + return rc; +} + +static int hotkey_status_get(int *status) +{ + if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) + return -EIO; + + return 0; +} + +static int hotkey_status_set(int status) +{ + if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status)) + return -EIO; + + return 0; +} + /* sysfs hotkey enable ------------------------------------------------- */ static ssize_t hotkey_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { int res, status; - u32 mask; - res = hotkey_get(&status, &mask); + res = hotkey_status_get(&status); if (res) return res; @@ -809,15 +871,12 @@ static ssize_t hotkey_enable_store(struct device *dev, const char *buf, size_t count) { unsigned long t; - int res, status; - u32 mask; + int res; if (parse_strtoul(buf, 1, &t)) return -EINVAL; - res = hotkey_get(&status, &mask); - if (!res) - res = hotkey_set(t, mask); + res = hotkey_status_set(t); return (res) ? res : count; } @@ -831,14 +890,15 @@ static ssize_t hotkey_mask_show(struct device *dev, struct device_attribute *attr, char *buf) { - int res, status; - u32 mask; + int res; - res = hotkey_get(&status, &mask); - if (res) - return res; + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; + res = hotkey_mask_get(); + mutex_unlock(&hotkey_mutex); - return snprintf(buf, PAGE_SIZE, "0x%08x\n", mask); + return (res)? + res : snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_mask); } static ssize_t hotkey_mask_store(struct device *dev, @@ -846,15 +906,16 @@ static ssize_t hotkey_mask_store(struct device *dev, const char *buf, size_t count) { unsigned long t; - int res, status; - u32 mask; + int res; if (parse_strtoul(buf, 0xffffffffUL, &t)) return -EINVAL; - res = hotkey_get(&status, &mask); - if (!res) - hotkey_set(status, t); + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; + + res = hotkey_mask_set(t); + mutex_unlock(&hotkey_mutex); return (res) ? res : count; } @@ -1123,11 +1184,16 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) } } - res = hotkey_get(&hotkey_orig_status, &hotkey_orig_mask); + res = hotkey_status_get(&hotkey_orig_status); if (!res && tp_features.hotkey_mask) { - res = add_many_to_attr_set(hotkey_dev_attributes, - hotkey_mask_attributes, - ARRAY_SIZE(hotkey_mask_attributes)); + res = hotkey_mask_get(); + hotkey_orig_mask = hotkey_mask; + if (!res) { + res = add_many_to_attr_set( + hotkey_dev_attributes, + hotkey_mask_attributes, + ARRAY_SIZE(hotkey_mask_attributes)); + } } /* Not all thinkpads have a hardware radio switch */ @@ -1191,7 +1257,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); - res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask) + res = hotkey_status_set(1); + if (res) + return res; + res = hotkey_mask_set((hotkey_all_mask & ~hotkey_reserved_mask) | hotkey_orig_mask); if (res) return res; @@ -1207,13 +1276,12 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) static void hotkey_exit(void) { - int res; - if (tp_features.hotkey) { - dbg_printk(TPACPI_DBG_EXIT, "restoring original hotkey mask\n"); - res = hotkey_set(hotkey_orig_status, hotkey_orig_mask); - if (res) - printk(IBM_ERR "failed to restore hotkey to BIOS defaults\n"); + dbg_printk(TPACPI_DBG_EXIT, "restoring original hot key mask\n"); + /* no short-circuit boolean operator below! */ + if ((hotkey_mask_set(hotkey_orig_mask) | + hotkey_status_set(hotkey_orig_status)) != 0) + printk(IBM_ERR "failed to restore hot key mask to BIOS defaults\n"); } if (hotkey_dev_attributes) { @@ -1349,50 +1417,15 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) static void hotkey_resume(void) { + if (hotkey_mask_get()) + printk(IBM_ERR "error while trying to read hot key mask from firmware\n"); tpacpi_input_send_radiosw(); } -/* - * Call with hotkey_mutex held - */ -static int hotkey_get(int *status, u32 *mask) -{ - if (!acpi_evalf(hkey_handle, status, "DHKC", "d")) - return -EIO; - - if (tp_features.hotkey_mask) - if (!acpi_evalf(hkey_handle, mask, "DHKN", "d")) - return -EIO; - - return 0; -} - -/* - * Call with hotkey_mutex held - */ -static int hotkey_set(int status, u32 mask) -{ - int i; - - if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status)) - return -EIO; - - if (tp_features.hotkey_mask) - for (i = 0; i < 32; i++) { - int bit = ((1 << i) & mask) != 0; - if (!acpi_evalf(hkey_handle, - NULL, "MHKM", "vdd", i + 1, bit)) - return -EIO; - } - - return 0; -} - /* procfs -------------------------------------------------------------- */ static int hotkey_read(char *p) { int res, status; - u32 mask; int len = 0; if (!tp_features.hotkey) { @@ -1402,14 +1435,16 @@ static int hotkey_read(char *p) if (mutex_lock_interruptible(&hotkey_mutex)) return -ERESTARTSYS; - res = hotkey_get(&status, &mask); + res = hotkey_status_get(&status); + if (!res) + res = hotkey_mask_get(); mutex_unlock(&hotkey_mutex); if (res) return res; len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0)); if (tp_features.hotkey_mask) { - len += sprintf(p + len, "mask:\t\t0x%08x\n", mask); + len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_mask); len += sprintf(p + len, "commands:\tenable, disable, reset, \n"); } else { @@ -1425,7 +1460,6 @@ static int hotkey_write(char *buf) int res, status; u32 mask; char *cmd; - int do_cmd = 0; if (!tp_features.hotkey) return -ENODEV; @@ -1433,9 +1467,8 @@ static int hotkey_write(char *buf) if (mutex_lock_interruptible(&hotkey_mutex)) return -ERESTARTSYS; - res = hotkey_get(&status, &mask); - if (res) - goto errexit; + status = -1; + mask = hotkey_mask; res = 0; while ((cmd = next_cmd(&buf))) { @@ -1454,11 +1487,12 @@ static int hotkey_write(char *buf) res = -EINVAL; goto errexit; } - do_cmd = 1; } + if (status != -1) + res = hotkey_status_set(status); - if (do_cmd) - res = hotkey_set(status, mask); + if (!res && mask != hotkey_mask) + res = hotkey_mask_set(mask); errexit: mutex_unlock(&hotkey_mutex); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index 8fba2bbe345e..3b0313443138 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -461,8 +461,6 @@ static struct mutex hotkey_mutex; static int hotkey_init(struct ibm_init_struct *iibm); static void hotkey_exit(void); -static int hotkey_get(int *status, u32 *mask); -static int hotkey_set(int status, u32 mask); static void hotkey_notify(struct ibm_struct *ibm, u32 event); static int hotkey_read(char *p); static int hotkey_write(char *buf); From b7c8c200bfbf523ea0a72fd8a5e39089c74da371 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:40 -0200 Subject: [PATCH 034/112] ACPI: thinkpad-acpi: prepare for NVRAM polling support Make some small internal thinkpad-acpi changes to the hotkey subdriver code that will make it easier to add NVRAM polling support. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 82 ++++++++++++++++++------------------ 1 file changed, 42 insertions(+), 40 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 49d4f4af759e..e7ac1c8a5541 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -852,6 +852,46 @@ static int hotkey_status_set(int status) return 0; } +static void tpacpi_input_send_radiosw(void) +{ + int wlsw; + + mutex_lock(&tpacpi_inputdev_send_mutex); + + if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) { + input_report_switch(tpacpi_inputdev, + SW_RADIO, !!wlsw); + input_sync(tpacpi_inputdev); + } + + mutex_unlock(&tpacpi_inputdev_send_mutex); +} + +static void tpacpi_input_send_key(unsigned int scancode) +{ + unsigned int keycode; + + keycode = hotkey_keycode_map[scancode]; + + if (keycode != KEY_RESERVED) { + mutex_lock(&tpacpi_inputdev_send_mutex); + + input_report_key(tpacpi_inputdev, keycode, 1); + if (keycode == KEY_UNKNOWN) + input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, + scancode); + input_sync(tpacpi_inputdev); + + input_report_key(tpacpi_inputdev, keycode, 0); + if (keycode == KEY_UNKNOWN) + input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, + scancode); + input_sync(tpacpi_inputdev); + + mutex_unlock(&tpacpi_inputdev_send_mutex); + } +} + /* sysfs hotkey enable ------------------------------------------------- */ static ssize_t hotkey_enable_show(struct device *dev, struct device_attribute *attr, @@ -1290,47 +1330,10 @@ static void hotkey_exit(void) } } -static void tpacpi_input_send_key(unsigned int scancode, - unsigned int keycode) -{ - if (keycode != KEY_RESERVED) { - mutex_lock(&tpacpi_inputdev_send_mutex); - - input_report_key(tpacpi_inputdev, keycode, 1); - if (keycode == KEY_UNKNOWN) - input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, - scancode); - input_sync(tpacpi_inputdev); - - input_report_key(tpacpi_inputdev, keycode, 0); - if (keycode == KEY_UNKNOWN) - input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, - scancode); - input_sync(tpacpi_inputdev); - - mutex_unlock(&tpacpi_inputdev_send_mutex); - } -} - -static void tpacpi_input_send_radiosw(void) -{ - int wlsw; - - mutex_lock(&tpacpi_inputdev_send_mutex); - - if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) { - input_report_switch(tpacpi_inputdev, - SW_RADIO, !!wlsw); - input_sync(tpacpi_inputdev); - } - - mutex_unlock(&tpacpi_inputdev_send_mutex); -} - static void hotkey_notify(struct ibm_struct *ibm, u32 event) { u32 hkey; - unsigned int keycode, scancode; + unsigned int scancode; int send_acpi_ev; int ignore_acpi_ev; @@ -1363,8 +1366,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) scancode = hkey & 0xfff; if (scancode > 0 && scancode < 0x21) { scancode--; - keycode = hotkey_keycode_map[scancode]; - tpacpi_input_send_key(scancode, keycode); + tpacpi_input_send_key(scancode); } else { printk(IBM_ERR "hotkey 0x%04x out of range for keyboard map\n", From 01e88f25985d8ea5866c9a73d56b3a9a9145066f Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:41 -0200 Subject: [PATCH 035/112] ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9) Older ThinkPad models do not export some of the hot keys over the event-based ACPI hot key interface. For these models, one has to poll the CMOS NVRAM to check the key state at a rate faster than the expected rate at which the user might repeatedly press the same hot key. This patch implements this functionality for many of the hotkeys in a transparent way: hot keys will now Just Work, and the driver knows the best approach (events or NVRAM polling) to employ, based on the HKEY.MHKA ACPI method. Also, the driver can turn off the polling when there are no users for the hot keys that need such polling. The NVRAM-based hot keys of the A3x series that have never been implemented by later models are not supported, to avoid changes in the keymap of the input devices that could cause headaches in the future. There is a Kconfig option to avoid compiling the NVRAM polling code, as it is not very small, and unlikely to be useful on any ThinkPad newer than a T40, X31 or R52. This feature is based on a previous effort by Richard Hughes. Signed-off-by: Henrique de Moraes Holschuh Cc: Richard Hughes Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 71 ++++- drivers/misc/Kconfig | 19 ++ drivers/misc/thinkpad_acpi.c | 505 +++++++++++++++++++++++++++++++- drivers/misc/thinkpad_acpi.h | 60 +++- 4 files changed, 632 insertions(+), 23 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 10c041ca13c7..70d91a52e0ff 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -215,6 +215,11 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file: ... any other 8-hex-digit mask ... echo reset > /proc/acpi/ibm/hotkey -- restore the original mask +The procfs interface does not support NVRAM polling control. So as to +maintain maximum bug-to-bug compatibility, it does not report any masks, +nor does it allow one to manipulate the hot key mask when the firmware +does not support masks at all, even if NVRAM polling is in use. + sysfs notes: hotkey_bios_enabled: @@ -231,17 +236,26 @@ sysfs notes: to this value. hotkey_enable: - Enables/disables the hot keys feature, and reports - current status of the hot keys feature. + Enables/disables the hot keys feature in the ACPI + firmware, and reports current status of the hot keys + feature. Has no effect on the NVRAM hot key polling + functionality. 0: disables the hot keys feature / feature disabled 1: enables the hot keys feature / feature enabled hotkey_mask: - bit mask to enable driver-handling and ACPI event - generation for each hot key (see above). Returns the - current status of the hot keys mask, and allows one to - modify it. + bit mask to enable driver-handling (and depending on + the firmware, ACPI event generation) for each hot key + (see above). Returns the current status of the hot keys + mask, and allows one to modify it. + + Note: when NVRAM polling is active, the firmware mask + will be different from the value returned by + hotkey_mask. The driver will retain enabled bits for + hotkeys that are under NVRAM polling even if the + firmware refuses them, and will not set these bits on + the firmware hot key mask. hotkey_all_mask: bit mask that should enable event reporting for all @@ -257,6 +271,40 @@ sysfs notes: handled by the firmware anyway. Echo it to hotkey_mask above, to use. + hotkey_source_mask: + bit mask that selects which hot keys will the driver + poll the NVRAM for. This is auto-detected by the driver + based on the capabilities reported by the ACPI firmware, + but it can be overridden at runtime. + + Hot keys whose bits are set in both hotkey_source_mask + and also on hotkey_mask are polled for in NVRAM. Only a + few hot keys are available through CMOS NVRAM polling. + + Warning: when in NVRAM mode, the volume up/down/mute + keys are synthesized according to changes in the mixer, + so you have to use volume up or volume down to unmute, + as per the ThinkPad volume mixer user interface. When + in ACPI event mode, volume up/down/mute are reported as + separate events, but this behaviour may be corrected in + future releases of this driver, in which case the + ThinkPad volume mixer user interface semanthics will be + enforced. + + hotkey_poll_freq: + frequency in Hz for hot key polling. It must be between + 0 and 25 Hz. Polling is only carried out when strictly + needed. + + Setting hotkey_poll_freq to zero disables polling, and + will cause hot key presses that require NVRAM polling + to never be reported. + + Setting hotkey_poll_freq too low will cause repeated + pressings of the same hot key to be misreported as a + single key press, or to not even be detected at all. + The recommended polling frequency is 10Hz. + hotkey_radio_sw: if the ThinkPad has a hardware radio switch, this attribute will read 0 if the switch is in the "radios @@ -1263,3 +1311,14 @@ Sysfs interface changelog: and the hwmon class for libsensors4 (lm-sensors 3) compatibility. Moved all hwmon attributes to this new platform device. + +0x020100: Marker for thinkpad-acpi with hot key NVRAM polling + support. If you must, use it to know you should not + start an userspace NVRAM poller (allows to detect when + NVRAM is compiled out by the user because it is + unneeded/undesired in the first place). +0x020101: Marker for thinkpad-acpi with hot key NVRAM polling + and proper hotkey_mask semanthics (version 8 of the + NVRAM polling patch). Some development snapshots of + 0.18 had an earlier version that did strange things + to hotkey_mask. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b5e67c0ff433..b1f9a405c822 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -219,6 +219,25 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. +config THINKPAD_ACPI_HOTKEY_POLL + bool "Suport NVRAM polling for hot keys" + depends on THINKPAD_ACPI + default y + ---help--- + Some thinkpad models benefit from NVRAM polling to detect a few of + the hot key press events. If you know your ThinkPad model does not + need to do NVRAM polling to support any of the hot keys you use, + unselecting this option will save about 1kB of memory. + + ThinkPads T40 and newer, R52 and newer, and X31 and newer are + unlikely to need NVRAM polling in their latest BIOS versions. + + NVRAM polling can detect at most the following keys: ThinkPad/Access + IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, + Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). + + If you are not sure, say Y here. The driver enables polling only if + it is strictly necessary to do so. config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index e7ac1c8a5541..9ff9142ce063 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -22,7 +22,7 @@ */ #define IBM_VERSION "0.17" -#define TPACPI_SYSFS_VERSION 0x020000 +#define TPACPI_SYSFS_VERSION 0x020101 /* * Changelog: @@ -773,6 +773,67 @@ static struct ibm_struct thinkpad_acpi_driver_data = { * Hotkey subdriver */ +enum { /* Keys available through NVRAM polling */ + TPACPI_HKEY_NVRAM_KNOWN_MASK = 0x00fb88c0U, + TPACPI_HKEY_NVRAM_GOOD_MASK = 0x00fb8000U, +}; + +enum { /* Positions of some of the keys in hotkey masks */ + TP_ACPI_HKEY_DISPSWTCH_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNF7, + TP_ACPI_HKEY_DISPXPAND_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNF8, + TP_ACPI_HKEY_HIBERNATE_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNF12, + TP_ACPI_HKEY_BRGHTUP_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNHOME, + TP_ACPI_HKEY_BRGHTDWN_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNEND, + TP_ACPI_HKEY_THNKLGHT_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNPAGEUP, + TP_ACPI_HKEY_ZOOM_MASK = 1 << TP_ACPI_HOTKEYSCAN_FNSPACE, + TP_ACPI_HKEY_VOLUP_MASK = 1 << TP_ACPI_HOTKEYSCAN_VOLUMEUP, + TP_ACPI_HKEY_VOLDWN_MASK = 1 << TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, + TP_ACPI_HKEY_MUTE_MASK = 1 << TP_ACPI_HOTKEYSCAN_MUTE, + TP_ACPI_HKEY_THINKPAD_MASK = 1 << TP_ACPI_HOTKEYSCAN_THINKPAD, +}; + +enum { /* NVRAM to ACPI HKEY group map */ + TP_NVRAM_HKEY_GROUP_HK2 = TP_ACPI_HKEY_THINKPAD_MASK | + TP_ACPI_HKEY_ZOOM_MASK | + TP_ACPI_HKEY_DISPSWTCH_MASK | + TP_ACPI_HKEY_HIBERNATE_MASK, + TP_NVRAM_HKEY_GROUP_BRIGHTNESS = TP_ACPI_HKEY_BRGHTUP_MASK | + TP_ACPI_HKEY_BRGHTDWN_MASK, + TP_NVRAM_HKEY_GROUP_VOLUME = TP_ACPI_HKEY_VOLUP_MASK | + TP_ACPI_HKEY_VOLDWN_MASK | + TP_ACPI_HKEY_MUTE_MASK, +}; + +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL +struct tp_nvram_state { + u16 thinkpad_toggle:1; + u16 zoom_toggle:1; + u16 display_toggle:1; + u16 thinklight_toggle:1; + u16 hibernate_toggle:1; + u16 displayexp_toggle:1; + u16 display_state:1; + u16 brightness_toggle:1; + u16 volume_toggle:1; + u16 mute:1; + + u8 brightness_level; + u8 volume_level; +}; + +static struct task_struct *tpacpi_hotkey_task; +static u32 hotkey_source_mask; /* bit mask 0=ACPI,1=NVRAM */ +static int hotkey_poll_freq = 10; /* Hz */ +static struct mutex hotkey_thread_mutex; +static struct mutex hotkey_thread_data_mutex; +static unsigned int hotkey_config_change; + +#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + +#define hotkey_source_mask 0U + +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + static int hotkey_orig_status; static u32 hotkey_orig_mask; static u32 hotkey_all_mask; @@ -783,6 +844,17 @@ static u16 *hotkey_keycode_map; static struct attribute_set *hotkey_dev_attributes; +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL +#define HOTKEY_CONFIG_CRITICAL_START \ + mutex_lock(&hotkey_thread_data_mutex); \ + hotkey_config_change++; +#define HOTKEY_CONFIG_CRITICAL_END \ + mutex_unlock(&hotkey_thread_data_mutex); +#else +#define HOTKEY_CONFIG_CRITICAL_START +#define HOTKEY_CONFIG_CRITICAL_END +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + static int hotkey_get_wlsw(int *status) { if (!acpi_evalf(hkey_handle, status, "WLSW", "d")) @@ -795,10 +867,13 @@ static int hotkey_get_wlsw(int *status) */ static int hotkey_mask_get(void) { + u32 m = 0; + if (tp_features.hotkey_mask) { - if (!acpi_evalf(hkey_handle, &hotkey_mask, "DHKN", "d")) + if (!acpi_evalf(hkey_handle, &m, "DHKN", "d")) return -EIO; } + hotkey_mask = m | (hotkey_source_mask & hotkey_mask); return 0; } @@ -812,25 +887,50 @@ static int hotkey_mask_set(u32 mask) int rc = 0; if (tp_features.hotkey_mask) { + HOTKEY_CONFIG_CRITICAL_START for (i = 0; i < 32; i++) { u32 m = 1 << i; + /* enable in firmware mask only keys not in NVRAM + * mode, but enable the key in the cached hotkey_mask + * regardless of mode, or the key will end up + * disabled by hotkey_mask_get() */ if (!acpi_evalf(hkey_handle, NULL, "MHKM", "vdd", i + 1, - !!(mask & m))) { + !!((mask & ~hotkey_source_mask) & m))) { rc = -EIO; break; } else { hotkey_mask = (hotkey_mask & ~m) | (mask & m); } } + HOTKEY_CONFIG_CRITICAL_END /* hotkey_mask_get must be called unconditionally below */ - if (!hotkey_mask_get() && !rc && hotkey_mask != mask) { + if (!hotkey_mask_get() && !rc && + (hotkey_mask & ~hotkey_source_mask) != + (mask & ~hotkey_source_mask)) { printk(IBM_NOTICE "requested hot key mask 0x%08x, but " "firmware forced it to 0x%08x\n", mask, hotkey_mask); } + } else { +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + HOTKEY_CONFIG_CRITICAL_START + hotkey_mask = mask & hotkey_source_mask; + HOTKEY_CONFIG_CRITICAL_END + hotkey_mask_get(); + if (hotkey_mask != mask) { + printk(IBM_NOTICE + "requested hot key mask 0x%08x, " + "forced to 0x%08x (NVRAM poll mask is " + "0x%08x): no firmware mask support\n", + mask, hotkey_mask, hotkey_source_mask); + } +#else + hotkey_mask_get(); + rc = -ENXIO; +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ } return rc; @@ -892,6 +992,256 @@ static void tpacpi_input_send_key(unsigned int scancode) } } +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL +static struct tp_acpi_drv_struct ibm_hotkey_acpidriver; + +static void tpacpi_hotkey_send_key(unsigned int scancode) +{ + tpacpi_input_send_key(scancode); + if (hotkey_report_mode < 2) { + acpi_bus_generate_proc_event(ibm_hotkey_acpidriver.device, + 0x80, 0x1001 + scancode); + } +} + +static void hotkey_read_nvram(struct tp_nvram_state *n, u32 m) +{ + u8 d; + + if (m & TP_NVRAM_HKEY_GROUP_HK2) { + d = nvram_read_byte(TP_NVRAM_ADDR_HK2); + n->thinkpad_toggle = !!(d & TP_NVRAM_MASK_HKT_THINKPAD); + n->zoom_toggle = !!(d & TP_NVRAM_MASK_HKT_ZOOM); + n->display_toggle = !!(d & TP_NVRAM_MASK_HKT_DISPLAY); + n->hibernate_toggle = !!(d & TP_NVRAM_MASK_HKT_HIBERNATE); + } + if (m & TP_ACPI_HKEY_THNKLGHT_MASK) { + d = nvram_read_byte(TP_NVRAM_ADDR_THINKLIGHT); + n->thinklight_toggle = !!(d & TP_NVRAM_MASK_THINKLIGHT); + } + if (m & TP_ACPI_HKEY_DISPXPAND_MASK) { + d = nvram_read_byte(TP_NVRAM_ADDR_VIDEO); + n->displayexp_toggle = + !!(d & TP_NVRAM_MASK_HKT_DISPEXPND); + } + if (m & TP_NVRAM_HKEY_GROUP_BRIGHTNESS) { + d = nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS); + n->brightness_level = (d & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) + >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; + n->brightness_toggle = + !!(d & TP_NVRAM_MASK_HKT_BRIGHTNESS); + } + if (m & TP_NVRAM_HKEY_GROUP_VOLUME) { + d = nvram_read_byte(TP_NVRAM_ADDR_MIXER); + n->volume_level = (d & TP_NVRAM_MASK_LEVEL_VOLUME) + >> TP_NVRAM_POS_LEVEL_VOLUME; + n->mute = !!(d & TP_NVRAM_MASK_MUTE); + n->volume_toggle = !!(d & TP_NVRAM_MASK_HKT_VOLUME); + } +} + +#define TPACPI_COMPARE_KEY(__scancode, __member) \ + do { if ((mask & (1 << __scancode)) && oldn->__member != newn->__member) \ + tpacpi_hotkey_send_key(__scancode); } while (0) + +#define TPACPI_MAY_SEND_KEY(__scancode) \ + do { if (mask & (1 << __scancode)) \ + tpacpi_hotkey_send_key(__scancode); } while (0) + +static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn, + struct tp_nvram_state *newn, + u32 mask) +{ + TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle); + TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNSPACE, zoom_toggle); + TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF7, display_toggle); + TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF12, hibernate_toggle); + + TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNPAGEUP, thinklight_toggle); + + TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF8, displayexp_toggle); + + /* handle volume */ + if (oldn->volume_toggle != newn->volume_toggle) { + if (oldn->mute != newn->mute) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_MUTE); + } + if (oldn->volume_level > newn->volume_level) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEDOWN); + } else if (oldn->volume_level < newn->volume_level) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEUP); + } else if (oldn->mute == newn->mute) { + /* repeated key presses that didn't change state */ + if (newn->mute) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_MUTE); + } else if (newn->volume_level != 0) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEUP); + } else { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEDOWN); + } + } + } + + /* handle brightness */ + if (oldn->brightness_toggle != newn->brightness_toggle) { + if (oldn->brightness_level < newn->brightness_level) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNHOME); + } else if (oldn->brightness_level > newn->brightness_level) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNEND); + } else { + /* repeated key presses that didn't change state */ + if (newn->brightness_level != 0) { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNHOME); + } else { + TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNEND); + } + } + } +} + +#undef TPACPI_COMPARE_KEY +#undef TPACPI_MAY_SEND_KEY + +static int hotkey_kthread(void *data) +{ + struct tp_nvram_state s[2]; + u32 mask; + unsigned int si, so; + unsigned long t; + unsigned int change_detector, must_reset; + + mutex_lock(&hotkey_thread_mutex); + + if (tpacpi_lifecycle == TPACPI_LIFE_EXITING) + goto exit; + + set_freezable(); + + so = 0; + si = 1; + t = 0; + + /* Initial state for compares */ + mutex_lock(&hotkey_thread_data_mutex); + change_detector = hotkey_config_change; + mask = hotkey_source_mask & hotkey_mask; + mutex_unlock(&hotkey_thread_data_mutex); + hotkey_read_nvram(&s[so], mask); + + while (!kthread_should_stop() && hotkey_poll_freq) { + if (t == 0) + t = 1000/hotkey_poll_freq; + t = msleep_interruptible(t); + if (unlikely(kthread_should_stop())) + break; + must_reset = try_to_freeze(); + if (t > 0 && !must_reset) + continue; + + mutex_lock(&hotkey_thread_data_mutex); + if (must_reset || hotkey_config_change != change_detector) { + /* forget old state on thaw or config change */ + si = so; + t = 0; + change_detector = hotkey_config_change; + } + mask = hotkey_source_mask & hotkey_mask; + mutex_unlock(&hotkey_thread_data_mutex); + + if (likely(mask)) { + hotkey_read_nvram(&s[si], mask); + if (likely(si != so)) { + hotkey_compare_and_issue_event(&s[so], &s[si], + mask); + } + } + + so = si; + si ^= 1; + } + +exit: + mutex_unlock(&hotkey_thread_mutex); + return 0; +} + +static void hotkey_poll_stop_sync(void) +{ + if (tpacpi_hotkey_task) { + if (frozen(tpacpi_hotkey_task) || + freezing(tpacpi_hotkey_task)) + thaw_process(tpacpi_hotkey_task); + + kthread_stop(tpacpi_hotkey_task); + tpacpi_hotkey_task = NULL; + mutex_lock(&hotkey_thread_mutex); + /* at this point, the thread did exit */ + mutex_unlock(&hotkey_thread_mutex); + } +} + +/* call with hotkey_mutex held */ +static void hotkey_poll_setup(int may_warn) +{ + if ((hotkey_source_mask & hotkey_mask) != 0 && + hotkey_poll_freq > 0 && + (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) { + if (!tpacpi_hotkey_task) { + tpacpi_hotkey_task = kthread_run(hotkey_kthread, + NULL, IBM_FILE "d"); + if (IS_ERR(tpacpi_hotkey_task)) { + tpacpi_hotkey_task = NULL; + printk(IBM_ERR "could not create kernel thread " + "for hotkey polling\n"); + } + } + } else { + hotkey_poll_stop_sync(); + if (may_warn && + hotkey_source_mask != 0 && hotkey_poll_freq == 0) { + printk(IBM_NOTICE "hot keys 0x%08x require polling, " + "which is currently disabled\n", + hotkey_source_mask); + } + } +} + +static void hotkey_poll_setup_safe(int may_warn) +{ + mutex_lock(&hotkey_mutex); + hotkey_poll_setup(may_warn); + mutex_unlock(&hotkey_mutex); +} + +static int hotkey_inputdev_open(struct input_dev *dev) +{ + switch (tpacpi_lifecycle) { + case TPACPI_LIFE_INIT: + /* + * hotkey_init will call hotkey_poll_setup_safe + * at the appropriate moment + */ + return 0; + case TPACPI_LIFE_EXITING: + return -EBUSY; + case TPACPI_LIFE_RUNNING: + hotkey_poll_setup_safe(0); + return 0; + } + + /* Should only happen if tpacpi_lifecycle is corrupt */ + BUG(); + return -EBUSY; +} + +static void hotkey_inputdev_close(struct input_dev *dev) +{ + /* disable hotkey polling when possible */ + if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING) + hotkey_poll_setup_safe(0); +} +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + /* sysfs hotkey enable ------------------------------------------------- */ static ssize_t hotkey_enable_show(struct device *dev, struct device_attribute *attr, @@ -955,6 +1305,11 @@ static ssize_t hotkey_mask_store(struct device *dev, return -ERESTARTSYS; res = hotkey_mask_set(t); + +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + hotkey_poll_setup(1); +#endif + mutex_unlock(&hotkey_mutex); return (res) ? res : count; @@ -991,7 +1346,8 @@ static ssize_t hotkey_all_mask_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_all_mask); + return snprintf(buf, PAGE_SIZE, "0x%08x\n", + hotkey_all_mask | hotkey_source_mask); } static struct device_attribute dev_attr_hotkey_all_mask = @@ -1003,13 +1359,86 @@ static ssize_t hotkey_recommended_mask_show(struct device *dev, char *buf) { return snprintf(buf, PAGE_SIZE, "0x%08x\n", - hotkey_all_mask & ~hotkey_reserved_mask); + (hotkey_all_mask | hotkey_source_mask) + & ~hotkey_reserved_mask); } static struct device_attribute dev_attr_hotkey_recommended_mask = __ATTR(hotkey_recommended_mask, S_IRUGO, hotkey_recommended_mask_show, NULL); +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + +/* sysfs hotkey hotkey_source_mask ------------------------------------- */ +static ssize_t hotkey_source_mask_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_source_mask); +} + +static ssize_t hotkey_source_mask_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long t; + + if (parse_strtoul(buf, 0xffffffffUL, &t) || + ((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0)) + return -EINVAL; + + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; + + HOTKEY_CONFIG_CRITICAL_START + hotkey_source_mask = t; + HOTKEY_CONFIG_CRITICAL_END + + hotkey_poll_setup(1); + + mutex_unlock(&hotkey_mutex); + + return count; +} + +static struct device_attribute dev_attr_hotkey_source_mask = + __ATTR(hotkey_source_mask, S_IWUSR | S_IRUGO, + hotkey_source_mask_show, hotkey_source_mask_store); + +/* sysfs hotkey hotkey_poll_freq --------------------------------------- */ +static ssize_t hotkey_poll_freq_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_poll_freq); +} + +static ssize_t hotkey_poll_freq_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long t; + + if (parse_strtoul(buf, 25, &t)) + return -EINVAL; + + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; + + hotkey_poll_freq = t; + + hotkey_poll_setup(1); + mutex_unlock(&hotkey_mutex); + + return count; +} + +static struct device_attribute dev_attr_hotkey_poll_freq = + __ATTR(hotkey_poll_freq, S_IWUSR | S_IRUGO, + hotkey_poll_freq_show, hotkey_poll_freq_store); + +#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ + /* sysfs hotkey radio_sw ----------------------------------------------- */ static ssize_t hotkey_radio_sw_show(struct device *dev, struct device_attribute *attr, @@ -1042,15 +1471,24 @@ static struct device_attribute dev_attr_hotkey_report_mode = static struct attribute *hotkey_attributes[] __initdata = { &dev_attr_hotkey_enable.attr, + &dev_attr_hotkey_bios_enabled.attr, &dev_attr_hotkey_report_mode.attr, +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + &dev_attr_hotkey_mask.attr, + &dev_attr_hotkey_all_mask.attr, + &dev_attr_hotkey_recommended_mask.attr, + &dev_attr_hotkey_source_mask.attr, + &dev_attr_hotkey_poll_freq.attr, +#endif }; static struct attribute *hotkey_mask_attributes[] __initdata = { - &dev_attr_hotkey_mask.attr, - &dev_attr_hotkey_bios_enabled.attr, &dev_attr_hotkey_bios_mask.attr, +#ifndef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + &dev_attr_hotkey_mask.attr, &dev_attr_hotkey_all_mask.attr, &dev_attr_hotkey_recommended_mask.attr, +#endif }; static int __init hotkey_init(struct ibm_init_struct *iibm) @@ -1172,10 +1610,17 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "initializing hotkey subdriver\n"); BUG_ON(!tpacpi_inputdev); + BUG_ON(tpacpi_inputdev->open != NULL || + tpacpi_inputdev->close != NULL); IBM_ACPIHANDLE_INIT(hkey); mutex_init(&hotkey_mutex); +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + mutex_init(&hotkey_thread_mutex); + mutex_init(&hotkey_thread_data_mutex); +#endif + /* hotkey not supported on 570 */ tp_features.hotkey = hkey_handle != NULL; @@ -1183,7 +1628,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(8, NULL); + hotkey_dev_attributes = create_attr_set(10, NULL); if (!hotkey_dev_attributes) return -ENOMEM; res = add_many_to_attr_set(hotkey_dev_attributes, @@ -1205,7 +1650,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* * MHKV 0x100 in A31, R40, R40e, * T4x, X31, and later - * */ + */ tp_features.hotkey_mask = 1; } } @@ -1224,6 +1669,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) } } + /* hotkey_source_mask *must* be zero for + * the first hotkey_mask_get */ res = hotkey_status_get(&hotkey_orig_status); if (!res && tp_features.hotkey_mask) { res = hotkey_mask_get(); @@ -1236,6 +1683,19 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) } } +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + if (tp_features.hotkey_mask) { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK + & ~hotkey_all_mask; + } else { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; + } + + vdbg_printk(TPACPI_DBG_INIT, + "hotkey source mask 0x%08x, polling freq %d\n", + hotkey_source_mask, hotkey_poll_freq); +#endif + /* Not all thinkpads have a hardware radio switch */ if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { tp_features.hotkey_wlsw = 1; @@ -1300,15 +1760,23 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) res = hotkey_status_set(1); if (res) return res; - res = hotkey_mask_set((hotkey_all_mask & ~hotkey_reserved_mask) + res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) + & ~hotkey_reserved_mask) | hotkey_orig_mask); - if (res) + if (res < 0 && res != -ENXIO) return res; dbg_printk(TPACPI_DBG_INIT, "legacy hot key reporting over procfs %s\n", (hotkey_report_mode < 2) ? "enabled" : "disabled"); + +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + tpacpi_inputdev->open = &hotkey_inputdev_open; + tpacpi_inputdev->close = &hotkey_inputdev_close; + + hotkey_poll_setup_safe(1); +#endif } return (tp_features.hotkey)? 0 : 1; @@ -1316,6 +1784,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) static void hotkey_exit(void) { +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + hotkey_poll_stop_sync(); +#endif + if (tp_features.hotkey) { dbg_printk(TPACPI_DBG_EXIT, "restoring original hot key mask\n"); /* no short-circuit boolean operator below! */ @@ -1366,7 +1838,11 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) scancode = hkey & 0xfff; if (scancode > 0 && scancode < 0x21) { scancode--; - tpacpi_input_send_key(scancode); + if (!(hotkey_source_mask & (1 << scancode))) { + tpacpi_input_send_key(scancode); + } else { + ignore_acpi_ev = 1; + } } else { printk(IBM_ERR "hotkey 0x%04x out of range for keyboard map\n", @@ -1422,6 +1898,9 @@ static void hotkey_resume(void) if (hotkey_mask_get()) printk(IBM_ERR "error while trying to read hot key mask from firmware\n"); tpacpi_input_send_radiosw(); +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + hotkey_poll_setup_safe(0); +#endif } /* procfs -------------------------------------------------------------- */ diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index 3b0313443138..582184dc4543 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -31,6 +31,9 @@ #include #include #include +#include +#include +#include #include #include @@ -82,10 +85,31 @@ #define TP_CMOS_BRIGHTNESS_UP 4 #define TP_CMOS_BRIGHTNESS_DOWN 5 -/* ThinkPad CMOS NVRAM constants */ -#define TP_NVRAM_ADDR_BRIGHTNESS 0x5e -#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x0f -#define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0 +/* NVRAM Addresses */ +enum tp_nvram_addr { + TP_NVRAM_ADDR_HK2 = 0x57, + TP_NVRAM_ADDR_THINKLIGHT = 0x58, + TP_NVRAM_ADDR_VIDEO = 0x59, + TP_NVRAM_ADDR_BRIGHTNESS = 0x5e, + TP_NVRAM_ADDR_MIXER = 0x60, +}; + +/* NVRAM bit masks */ +enum { + TP_NVRAM_MASK_HKT_THINKPAD = 0x08, + TP_NVRAM_MASK_HKT_ZOOM = 0x20, + TP_NVRAM_MASK_HKT_DISPLAY = 0x40, + TP_NVRAM_MASK_HKT_HIBERNATE = 0x80, + TP_NVRAM_MASK_THINKLIGHT = 0x10, + TP_NVRAM_MASK_HKT_DISPEXPND = 0x30, + TP_NVRAM_MASK_HKT_BRIGHTNESS = 0x20, + TP_NVRAM_MASK_LEVEL_BRIGHTNESS = 0x0f, + TP_NVRAM_POS_LEVEL_BRIGHTNESS = 0, + TP_NVRAM_MASK_MUTE = 0x40, + TP_NVRAM_MASK_HKT_VOLUME = 0x80, + TP_NVRAM_MASK_LEVEL_VOLUME = 0x0f, + TP_NVRAM_POS_LEVEL_VOLUME = 0, +}; #define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") @@ -255,6 +279,7 @@ static struct { u32 sensors_pdrv_registered:1; u32 sensors_pdrv_attrs_registered:1; u32 sensors_pdev_attrs_registered:1; + u32 hotkey_poll_active:1; } tp_features; struct thinkpad_id_data { @@ -454,6 +479,33 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc); * Hotkey subdriver */ +enum { /* hot key scan codes (derived from ACPI DSDT) */ + TP_ACPI_HOTKEYSCAN_FNF1 = 0, + TP_ACPI_HOTKEYSCAN_FNF2, + TP_ACPI_HOTKEYSCAN_FNF3, + TP_ACPI_HOTKEYSCAN_FNF4, + TP_ACPI_HOTKEYSCAN_FNF5, + TP_ACPI_HOTKEYSCAN_FNF6, + TP_ACPI_HOTKEYSCAN_FNF7, + TP_ACPI_HOTKEYSCAN_FNF8, + TP_ACPI_HOTKEYSCAN_FNF9, + TP_ACPI_HOTKEYSCAN_FNF10, + TP_ACPI_HOTKEYSCAN_FNF11, + TP_ACPI_HOTKEYSCAN_FNF12, + TP_ACPI_HOTKEYSCAN_FNBACKSPACE, + TP_ACPI_HOTKEYSCAN_FNINSERT, + TP_ACPI_HOTKEYSCAN_FNDELETE, + TP_ACPI_HOTKEYSCAN_FNHOME, + TP_ACPI_HOTKEYSCAN_FNEND, + TP_ACPI_HOTKEYSCAN_FNPAGEUP, + TP_ACPI_HOTKEYSCAN_FNPAGEDOWN, + TP_ACPI_HOTKEYSCAN_FNSPACE, + TP_ACPI_HOTKEYSCAN_VOLUMEUP, + TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, + TP_ACPI_HOTKEYSCAN_MUTE, + TP_ACPI_HOTKEYSCAN_THINKPAD, +}; + static int hotkey_orig_status; static u32 hotkey_orig_mask; From 50efd8310f4f532231b15c6bcb9007c99ac05466 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:42 -0200 Subject: [PATCH 036/112] ACPI: thinkpad-acpi: bump up version to 0.18 The NVRAM polling support for hot keys is reason enough to bump up the version string. Do it. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 4 ++-- drivers/misc/thinkpad_acpi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 70d91a52e0ff..7c7bd4720cfc 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.17 - October 04th, 2007 + Version 0.18 + October 08th, 2007 Borislav Deianov Henrique de Moraes Holschuh diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 9ff9142ce063..11ee444261bc 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.17" +#define IBM_VERSION "0.18" #define TPACPI_SYSFS_VERSION 0x020101 /* From 0c78039fcdb0806fafcc40400ace7fb7e81c65a5 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:43 -0200 Subject: [PATCH 037/112] ACPI: thinkpad-acpi: spring cleanup part 1 Remove the header file. Private header files used by a single .c file are in bad taste, and I know better now. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 632 ++++++++++++++++++++++++++++++++- drivers/misc/thinkpad_acpi.h | 656 ----------------------------------- 2 files changed, 631 insertions(+), 657 deletions(-) delete mode 100644 drivers/misc/thinkpad_acpi.h diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 11ee444261bc..59b127cff1ec 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -82,7 +82,637 @@ * 2004-08-09 0.1 initial release, support for X series */ -#include "thinkpad_acpi.h" +/* ==================================================== BEGIN HEADER */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +/**************************************************************************** + * Main driver + */ + +#define IBM_NAME "thinkpad" +#define IBM_DESC "ThinkPad ACPI Extras" +#define IBM_FILE IBM_NAME "_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" +#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net" + +#define IBM_PROC_DIR "ibm" +#define IBM_ACPI_EVENT_PREFIX "ibm" +#define IBM_DRVR_NAME IBM_FILE +#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon" + +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + +#define IBM_MAX_ACPI_ARGS 3 + +/* ThinkPad CMOS commands */ +#define TP_CMOS_VOLUME_DOWN 0 +#define TP_CMOS_VOLUME_UP 1 +#define TP_CMOS_VOLUME_MUTE 2 +#define TP_CMOS_BRIGHTNESS_UP 4 +#define TP_CMOS_BRIGHTNESS_DOWN 5 + +/* NVRAM Addresses */ +enum tp_nvram_addr { + TP_NVRAM_ADDR_HK2 = 0x57, + TP_NVRAM_ADDR_THINKLIGHT = 0x58, + TP_NVRAM_ADDR_VIDEO = 0x59, + TP_NVRAM_ADDR_BRIGHTNESS = 0x5e, + TP_NVRAM_ADDR_MIXER = 0x60, +}; + +/* NVRAM bit masks */ +enum { + TP_NVRAM_MASK_HKT_THINKPAD = 0x08, + TP_NVRAM_MASK_HKT_ZOOM = 0x20, + TP_NVRAM_MASK_HKT_DISPLAY = 0x40, + TP_NVRAM_MASK_HKT_HIBERNATE = 0x80, + TP_NVRAM_MASK_THINKLIGHT = 0x10, + TP_NVRAM_MASK_HKT_DISPEXPND = 0x30, + TP_NVRAM_MASK_HKT_BRIGHTNESS = 0x20, + TP_NVRAM_MASK_LEVEL_BRIGHTNESS = 0x0f, + TP_NVRAM_POS_LEVEL_BRIGHTNESS = 0, + TP_NVRAM_MASK_MUTE = 0x40, + TP_NVRAM_MASK_HKT_VOLUME = 0x80, + TP_NVRAM_MASK_LEVEL_VOLUME = 0x0f, + TP_NVRAM_POS_LEVEL_VOLUME = 0, +}; + +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) + +/* Debugging */ +#define TPACPI_DBG_ALL 0xffff +#define TPACPI_DBG_ALL 0xffff +#define TPACPI_DBG_INIT 0x0001 +#define TPACPI_DBG_EXIT 0x0002 +#define dbg_printk(a_dbg_level, format, arg...) \ + do { if (dbg_level & a_dbg_level) \ + printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0) +#ifdef CONFIG_THINKPAD_ACPI_DEBUG +#define vdbg_printk(a_dbg_level, format, arg...) \ + dbg_printk(a_dbg_level, format, ## arg) +static const char *str_supported(int is_supported); +#else +#define vdbg_printk(a_dbg_level, format, arg...) +#endif + +/* Input IDs */ +#define TPACPI_HKEY_INPUT_VENDOR PCI_VENDOR_ID_IBM +#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */ +#define TPACPI_HKEY_INPUT_VERSION 0x4101 + +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" + +/* ACPI helpers */ +static int __must_check acpi_evalf(acpi_handle handle, + void *res, char *method, char *fmt, ...); +static int __must_check acpi_ec_read(int i, u8 * p); +static int __must_check acpi_ec_write(int i, u8 v); +static int __must_check _sta(acpi_handle handle); + +/* ACPI handles */ +static acpi_handle root_handle; /* root namespace */ +static acpi_handle ec_handle; /* EC */ +static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ +static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ + +static void drv_acpi_handle_init(char *name, + acpi_handle *handle, acpi_handle parent, + char **paths, int num_paths, char **path); +#define IBM_ACPIHANDLE_INIT(object) \ + drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + +/* ThinkPad ACPI helpers */ +static int issue_thinkpad_cmos_command(int cmos_cmd); + +/* procfs support */ +static struct proc_dir_entry *proc_dir; + +/* procfs helpers */ +static int dispatch_procfs_read(char *page, char **start, off_t off, + int count, int *eof, void *data); +static int dispatch_procfs_write(struct file *file, + const char __user * userbuf, + unsigned long count, void *data); +static char *next_cmd(char **cmds); + +/* sysfs support */ +struct attribute_set { + unsigned int members, max_members; + struct attribute_group group; +}; + +static struct attribute_set *create_attr_set(unsigned int max_members, + const char* name); +#define destroy_attr_set(_set) \ + kfree(_set); +static int add_to_attr_set(struct attribute_set* s, struct attribute *attr); +static int add_many_to_attr_set(struct attribute_set* s, + struct attribute **attr, + unsigned int count); +#define register_attr_set_with_sysfs(_attr_set, _kobj) \ + sysfs_create_group(_kobj, &_attr_set->group) +static void delete_attr_set(struct attribute_set* s, struct kobject *kobj); + +static int parse_strtoul(const char *buf, unsigned long max, + unsigned long *value); + +/* Device model */ +static struct platform_device *tpacpi_pdev; +static struct platform_device *tpacpi_sensors_pdev; +static struct device *tpacpi_hwmon; +static struct platform_driver tpacpi_pdriver; +static struct input_dev *tpacpi_inputdev; +static int tpacpi_create_driver_attributes(struct device_driver *drv); +static void tpacpi_remove_driver_attributes(struct device_driver *drv); + +/* Module */ +static int experimental; +static u32 dbg_level; +static int force_load; +static unsigned int hotkey_report_mode; + +static int thinkpad_acpi_module_init(void); +static void thinkpad_acpi_module_exit(void); + + +/**************************************************************************** + * Subdrivers + */ + +struct ibm_struct; + +struct tp_acpi_drv_struct { + const struct acpi_device_id *hid; + struct acpi_driver *driver; + + void (*notify) (struct ibm_struct *, u32); + acpi_handle *handle; + u32 type; + struct acpi_device *device; +}; + +struct ibm_struct { + char *name; + + int (*read) (char *); + int (*write) (char *); + void (*exit) (void); + void (*resume) (void); + + struct list_head all_drivers; + + struct tp_acpi_drv_struct *acpi; + + struct { + u8 acpi_driver_registered:1; + u8 acpi_notify_installed:1; + u8 proc_created:1; + u8 init_called:1; + u8 experimental:1; + } flags; +}; + +struct ibm_init_struct { + char param[32]; + + int (*init) (struct ibm_init_struct *); + struct ibm_struct *data; +}; + +static struct { +#ifdef CONFIG_THINKPAD_ACPI_BAY + u32 bay_status:1; + u32 bay_eject:1; + u32 bay_status2:1; + u32 bay_eject2:1; +#endif + u32 bluetooth:1; + u32 hotkey:1; + u32 hotkey_mask:1; + u32 hotkey_wlsw:1; + u32 light:1; + u32 light_status:1; + u32 bright_16levels:1; + u32 wan:1; + u32 fan_ctrl_status_undef:1; + u32 input_device_registered:1; + u32 platform_drv_registered:1; + u32 platform_drv_attrs_registered:1; + u32 sensors_pdrv_registered:1; + u32 sensors_pdrv_attrs_registered:1; + u32 sensors_pdev_attrs_registered:1; + u32 hotkey_poll_active:1; +} tp_features; + +struct thinkpad_id_data { + unsigned int vendor; /* ThinkPad vendor: + * PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */ + + char *bios_version_str; /* Something like 1ZET51WW (1.03z) */ + char *ec_version_str; /* Something like 1ZHT51WW-1.04a */ + + u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */ + u16 ec_model; + + char *model_str; +}; + +static struct thinkpad_id_data thinkpad_id; + +static struct list_head tpacpi_all_drivers; + +static struct ibm_init_struct ibms_init[]; +static int set_ibm_param(const char *val, struct kernel_param *kp); +static int ibm_init(struct ibm_init_struct *iibm); +static void ibm_exit(struct ibm_struct *ibm); + + +/* + * procfs master subdriver + */ +static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm); +static int thinkpad_acpi_driver_read(char *p); + + +/* + * Bay subdriver + */ + +#ifdef CONFIG_THINKPAD_ACPI_BAY +static acpi_handle bay_handle, bay_ej_handle; +static acpi_handle bay2_handle, bay2_ej_handle; + +static int bay_init(struct ibm_init_struct *iibm); +static void bay_notify(struct ibm_struct *ibm, u32 event); +static int bay_read(char *p); +static int bay_write(char *buf); +#endif /* CONFIG_THINKPAD_ACPI_BAY */ + + +/* + * Beep subdriver + */ + +static acpi_handle beep_handle; + +static int beep_read(char *p); +static int beep_write(char *buf); + + +/* + * Bluetooth subdriver + */ + +enum { + /* ACPI GBDC/SBDC bits */ + TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */ + TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */ + TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */ +}; + +static int bluetooth_init(struct ibm_init_struct *iibm); +static int bluetooth_get_radiosw(void); +static int bluetooth_set_radiosw(int radio_on); +static int bluetooth_read(char *p); +static int bluetooth_write(char *buf); + + +/* + * Brightness (backlight) subdriver + */ + +#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen" + +static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; +static int brightness_mode; +static unsigned int brightness_enable; /* 0 = no, 1 = yes, 2 = auto */ + +static int brightness_init(struct ibm_init_struct *iibm); +static void brightness_exit(void); +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); +static int brightness_read(char *p); +static int brightness_write(char *buf); + + +/* + * CMOS subdriver + */ + +static int cmos_read(char *p); +static int cmos_write(char *buf); + + +/* + * Dock subdriver + */ + +#ifdef CONFIG_THINKPAD_ACPI_DOCK +static acpi_handle pci_handle; +static acpi_handle dock_handle; + +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); +#endif /* CONFIG_THINKPAD_ACPI_DOCK */ + + +/* + * EC dump subdriver + */ + +static int ecdump_read(char *p) ; +static int ecdump_write(char *buf); + + +/* + * Fan subdriver + */ + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ + TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ + + TPACPI_FAN_LAST_LEVEL = 0x100, /* Use cached last-seen fan level */ +}; + +enum fan_status_access_mode { + TPACPI_FAN_NONE = 0, /* No fan status or control */ + TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + TPACPI_FAN_WR_NONE = 0, /* No fan control */ + TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + TPACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + TPACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + TPACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static int fan_control_allowed; + +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; +static u8 fan_control_initial_status; +static u8 fan_control_desired_level; +static int fan_watchdog_maxinterval; + +static struct mutex fan_mutex; + +static acpi_handle fans_handle, gfan_handle, sfan_handle; + +static int fan_init(struct ibm_init_struct *iibm); +static void fan_exit(void); +static int fan_get_status(u8 *status); +static int fan_get_status_safe(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_update_desired_level(u8 status); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_level_safe(int level); +static int fan_set_enable(void); +static int fan_set_disable(void); +static int fan_set_speed(int speed); +static int fan_read(char *p); +static int fan_write(char *buf); +static int fan_write_cmd_level(const char *cmd, int *rc); +static int fan_write_cmd_enable(const char *cmd, int *rc); +static int fan_write_cmd_disable(const char *cmd, int *rc); +static int fan_write_cmd_speed(const char *cmd, int *rc); +static int fan_write_cmd_watchdog(const char *cmd, int *rc); + + +/* + * Hotkey subdriver + */ + +enum { /* hot key scan codes (derived from ACPI DSDT) */ + TP_ACPI_HOTKEYSCAN_FNF1 = 0, + TP_ACPI_HOTKEYSCAN_FNF2, + TP_ACPI_HOTKEYSCAN_FNF3, + TP_ACPI_HOTKEYSCAN_FNF4, + TP_ACPI_HOTKEYSCAN_FNF5, + TP_ACPI_HOTKEYSCAN_FNF6, + TP_ACPI_HOTKEYSCAN_FNF7, + TP_ACPI_HOTKEYSCAN_FNF8, + TP_ACPI_HOTKEYSCAN_FNF9, + TP_ACPI_HOTKEYSCAN_FNF10, + TP_ACPI_HOTKEYSCAN_FNF11, + TP_ACPI_HOTKEYSCAN_FNF12, + TP_ACPI_HOTKEYSCAN_FNBACKSPACE, + TP_ACPI_HOTKEYSCAN_FNINSERT, + TP_ACPI_HOTKEYSCAN_FNDELETE, + TP_ACPI_HOTKEYSCAN_FNHOME, + TP_ACPI_HOTKEYSCAN_FNEND, + TP_ACPI_HOTKEYSCAN_FNPAGEUP, + TP_ACPI_HOTKEYSCAN_FNPAGEDOWN, + TP_ACPI_HOTKEYSCAN_FNSPACE, + TP_ACPI_HOTKEYSCAN_VOLUMEUP, + TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, + TP_ACPI_HOTKEYSCAN_MUTE, + TP_ACPI_HOTKEYSCAN_THINKPAD, +}; + +static int hotkey_orig_status; +static u32 hotkey_orig_mask; + +static struct mutex hotkey_mutex; + +static int hotkey_init(struct ibm_init_struct *iibm); +static void hotkey_exit(void); +static void hotkey_notify(struct ibm_struct *ibm, u32 event); +static int hotkey_read(char *p); +static int hotkey_write(char *buf); + + +/* + * LED subdriver + */ + +enum led_access_mode { + TPACPI_LED_NONE = 0, + TPACPI_LED_570, /* 570 */ + TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + TPACPI_LED_NEW, /* all others */ +}; + +enum { /* For TPACPI_LED_OLD */ + TPACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + TPACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + +static enum led_access_mode led_supported; +static acpi_handle led_handle; + +static int led_init(struct ibm_init_struct *iibm); +static int led_read(char *p); +static int led_write(char *buf); + +/* + * Light (thinklight) subdriver + */ + +static acpi_handle lght_handle, ledb_handle; + +static int light_init(struct ibm_init_struct *iibm); +static int light_read(char *p); +static int light_write(char *buf); + + +/* + * Thermal subdriver + */ + +enum thermal_access_mode { + TPACPI_THERMAL_NONE = 0, /* No thermal support */ + TPACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + TPACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + TPACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + TPACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +enum { /* TPACPI_THERMAL_TPEC_* */ + TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */ + TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */ + TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */ +}; + +#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[TPACPI_MAX_THERMAL_SENSORS]; +}; + +static enum thermal_access_mode thermal_read_mode; + +static int thermal_init(struct ibm_init_struct *iibm); +static int thermal_get_sensor(int idx, s32 *value); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +static int thermal_read(char *p); + + +/* + * Video subdriver + */ + +enum video_access_mode { + TPACPI_VIDEO_NONE = 0, + TPACPI_VIDEO_570, /* 570 */ + TPACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + TPACPI_VIDEO_NEW, /* all others */ +}; + +enum { /* video status flags, based on VIDEO_570 */ + TP_ACPI_VIDEO_S_LCD = 0x01, /* LCD output enabled */ + TP_ACPI_VIDEO_S_CRT = 0x02, /* CRT output enabled */ + TP_ACPI_VIDEO_S_DVI = 0x08, /* DVI output enabled */ +}; + +enum { /* TPACPI_VIDEO_570 constants */ + TP_ACPI_VIDEO_570_PHSCMD = 0x87, /* unknown magic constant :( */ + TP_ACPI_VIDEO_570_PHSMASK = 0x03, /* PHS bits that map to + * video_status_flags */ + TP_ACPI_VIDEO_570_PHS2CMD = 0x8b, /* unknown magic constant :( */ + TP_ACPI_VIDEO_570_PHS2SET = 0x80, /* unknown magic constant :( */ +}; + +static enum video_access_mode video_supported; +static int video_orig_autosw; +static acpi_handle vid_handle, vid2_handle; + +static int video_init(struct ibm_init_struct *iibm); +static void video_exit(void); +static int video_outputsw_get(void); +static int video_outputsw_set(int status); +static int video_autosw_get(void); +static int video_autosw_set(int enable); +static int video_outputsw_cycle(void); +static int video_expand_toggle(void); +static int video_read(char *p); +static int video_write(char *buf); + + +/* + * Volume subdriver + */ + +static int volume_offset = 0x30; + +static int volume_read(char *p); +static int volume_write(char *buf); + + +/* + * Wan subdriver + */ + +enum { + /* ACPI GWAN/SWAN bits */ + TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */ + TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */ + TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */ +}; + +static int wan_init(struct ibm_init_struct *iibm); +static int wan_get_radiosw(void); +static int wan_set_radiosw(int radio_on); +static int wan_read(char *p); +static int wan_write(char *buf); + +/* ==================================================== END HEADER */ MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h deleted file mode 100644 index 582184dc4543..000000000000 --- a/drivers/misc/thinkpad_acpi.h +++ /dev/null @@ -1,656 +0,0 @@ -/* - * thinkpad_acpi.h - ThinkPad ACPI Extras - * - * - * Copyright (C) 2004-2005 Borislav Deianov - * Copyright (C) 2006-2007 Henrique de Moraes Holschuh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __THINKPAD_ACPI_H__ -#define __THINKPAD_ACPI_H__ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -/**************************************************************************** - * Main driver - */ - -#define IBM_NAME "thinkpad" -#define IBM_DESC "ThinkPad ACPI Extras" -#define IBM_FILE IBM_NAME "_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" -#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net" - -#define IBM_PROC_DIR "ibm" -#define IBM_ACPI_EVENT_PREFIX "ibm" -#define IBM_DRVR_NAME IBM_FILE -#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon" - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 - -/* ThinkPad CMOS commands */ -#define TP_CMOS_VOLUME_DOWN 0 -#define TP_CMOS_VOLUME_UP 1 -#define TP_CMOS_VOLUME_MUTE 2 -#define TP_CMOS_BRIGHTNESS_UP 4 -#define TP_CMOS_BRIGHTNESS_DOWN 5 - -/* NVRAM Addresses */ -enum tp_nvram_addr { - TP_NVRAM_ADDR_HK2 = 0x57, - TP_NVRAM_ADDR_THINKLIGHT = 0x58, - TP_NVRAM_ADDR_VIDEO = 0x59, - TP_NVRAM_ADDR_BRIGHTNESS = 0x5e, - TP_NVRAM_ADDR_MIXER = 0x60, -}; - -/* NVRAM bit masks */ -enum { - TP_NVRAM_MASK_HKT_THINKPAD = 0x08, - TP_NVRAM_MASK_HKT_ZOOM = 0x20, - TP_NVRAM_MASK_HKT_DISPLAY = 0x40, - TP_NVRAM_MASK_HKT_HIBERNATE = 0x80, - TP_NVRAM_MASK_THINKLIGHT = 0x10, - TP_NVRAM_MASK_HKT_DISPEXPND = 0x30, - TP_NVRAM_MASK_HKT_BRIGHTNESS = 0x20, - TP_NVRAM_MASK_LEVEL_BRIGHTNESS = 0x0f, - TP_NVRAM_POS_LEVEL_BRIGHTNESS = 0, - TP_NVRAM_MASK_MUTE = 0x40, - TP_NVRAM_MASK_HKT_VOLUME = 0x80, - TP_NVRAM_MASK_LEVEL_VOLUME = 0x0f, - TP_NVRAM_POS_LEVEL_VOLUME = 0, -}; - -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) - -/* Debugging */ -#define TPACPI_DBG_ALL 0xffff -#define TPACPI_DBG_ALL 0xffff -#define TPACPI_DBG_INIT 0x0001 -#define TPACPI_DBG_EXIT 0x0002 -#define dbg_printk(a_dbg_level, format, arg...) \ - do { if (dbg_level & a_dbg_level) \ - printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0) -#ifdef CONFIG_THINKPAD_ACPI_DEBUG -#define vdbg_printk(a_dbg_level, format, arg...) \ - dbg_printk(a_dbg_level, format, ## arg) -static const char *str_supported(int is_supported); -#else -#define vdbg_printk(a_dbg_level, format, arg...) -#endif - -/* Input IDs */ -#define TPACPI_HKEY_INPUT_VENDOR PCI_VENDOR_ID_IBM -#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */ -#define TPACPI_HKEY_INPUT_VERSION 0x4101 - -/* ACPI HIDs */ -#define IBM_HKEY_HID "IBM0068" - -/* ACPI helpers */ -static int __must_check acpi_evalf(acpi_handle handle, - void *res, char *method, char *fmt, ...); -static int __must_check acpi_ec_read(int i, u8 * p); -static int __must_check acpi_ec_write(int i, u8 v); -static int __must_check _sta(acpi_handle handle); - -/* ACPI handles */ -static acpi_handle root_handle; /* root namespace */ -static acpi_handle ec_handle; /* EC */ -static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ -static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ - -static void drv_acpi_handle_init(char *name, - acpi_handle *handle, acpi_handle parent, - char **paths, int num_paths, char **path); -#define IBM_ACPIHANDLE_INIT(object) \ - drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) - -/* ThinkPad ACPI helpers */ -static int issue_thinkpad_cmos_command(int cmos_cmd); - -/* procfs support */ -static struct proc_dir_entry *proc_dir; - -/* procfs helpers */ -static int dispatch_procfs_read(char *page, char **start, off_t off, - int count, int *eof, void *data); -static int dispatch_procfs_write(struct file *file, - const char __user * userbuf, - unsigned long count, void *data); -static char *next_cmd(char **cmds); - -/* sysfs support */ -struct attribute_set { - unsigned int members, max_members; - struct attribute_group group; -}; - -static struct attribute_set *create_attr_set(unsigned int max_members, - const char* name); -#define destroy_attr_set(_set) \ - kfree(_set); -static int add_to_attr_set(struct attribute_set* s, struct attribute *attr); -static int add_many_to_attr_set(struct attribute_set* s, - struct attribute **attr, - unsigned int count); -#define register_attr_set_with_sysfs(_attr_set, _kobj) \ - sysfs_create_group(_kobj, &_attr_set->group) -static void delete_attr_set(struct attribute_set* s, struct kobject *kobj); - -static int parse_strtoul(const char *buf, unsigned long max, - unsigned long *value); - -/* Device model */ -static struct platform_device *tpacpi_pdev; -static struct platform_device *tpacpi_sensors_pdev; -static struct device *tpacpi_hwmon; -static struct platform_driver tpacpi_pdriver; -static struct input_dev *tpacpi_inputdev; -static int tpacpi_create_driver_attributes(struct device_driver *drv); -static void tpacpi_remove_driver_attributes(struct device_driver *drv); - -/* Module */ -static int experimental; -static u32 dbg_level; -static int force_load; -static unsigned int hotkey_report_mode; - -static int thinkpad_acpi_module_init(void); -static void thinkpad_acpi_module_exit(void); - - -/**************************************************************************** - * Subdrivers - */ - -struct ibm_struct; - -struct tp_acpi_drv_struct { - const struct acpi_device_id *hid; - struct acpi_driver *driver; - - void (*notify) (struct ibm_struct *, u32); - acpi_handle *handle; - u32 type; - struct acpi_device *device; -}; - -struct ibm_struct { - char *name; - - int (*read) (char *); - int (*write) (char *); - void (*exit) (void); - void (*resume) (void); - - struct list_head all_drivers; - - struct tp_acpi_drv_struct *acpi; - - struct { - u8 acpi_driver_registered:1; - u8 acpi_notify_installed:1; - u8 proc_created:1; - u8 init_called:1; - u8 experimental:1; - } flags; -}; - -struct ibm_init_struct { - char param[32]; - - int (*init) (struct ibm_init_struct *); - struct ibm_struct *data; -}; - -static struct { -#ifdef CONFIG_THINKPAD_ACPI_BAY - u32 bay_status:1; - u32 bay_eject:1; - u32 bay_status2:1; - u32 bay_eject2:1; -#endif - u32 bluetooth:1; - u32 hotkey:1; - u32 hotkey_mask:1; - u32 hotkey_wlsw:1; - u32 light:1; - u32 light_status:1; - u32 bright_16levels:1; - u32 wan:1; - u32 fan_ctrl_status_undef:1; - u32 input_device_registered:1; - u32 platform_drv_registered:1; - u32 platform_drv_attrs_registered:1; - u32 sensors_pdrv_registered:1; - u32 sensors_pdrv_attrs_registered:1; - u32 sensors_pdev_attrs_registered:1; - u32 hotkey_poll_active:1; -} tp_features; - -struct thinkpad_id_data { - unsigned int vendor; /* ThinkPad vendor: - * PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */ - - char *bios_version_str; /* Something like 1ZET51WW (1.03z) */ - char *ec_version_str; /* Something like 1ZHT51WW-1.04a */ - - u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */ - u16 ec_model; - - char *model_str; -}; - -static struct thinkpad_id_data thinkpad_id; - -static struct list_head tpacpi_all_drivers; - -static struct ibm_init_struct ibms_init[]; -static int set_ibm_param(const char *val, struct kernel_param *kp); -static int ibm_init(struct ibm_init_struct *iibm); -static void ibm_exit(struct ibm_struct *ibm); - - -/* - * procfs master subdriver - */ -static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm); -static int thinkpad_acpi_driver_read(char *p); - - -/* - * Bay subdriver - */ - -#ifdef CONFIG_THINKPAD_ACPI_BAY -static acpi_handle bay_handle, bay_ej_handle; -static acpi_handle bay2_handle, bay2_ej_handle; - -static int bay_init(struct ibm_init_struct *iibm); -static void bay_notify(struct ibm_struct *ibm, u32 event); -static int bay_read(char *p); -static int bay_write(char *buf); -#endif /* CONFIG_THINKPAD_ACPI_BAY */ - - -/* - * Beep subdriver - */ - -static acpi_handle beep_handle; - -static int beep_read(char *p); -static int beep_write(char *buf); - - -/* - * Bluetooth subdriver - */ - -enum { - /* ACPI GBDC/SBDC bits */ - TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */ - TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */ - TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */ -}; - -static int bluetooth_init(struct ibm_init_struct *iibm); -static int bluetooth_get_radiosw(void); -static int bluetooth_set_radiosw(int radio_on); -static int bluetooth_read(char *p); -static int bluetooth_write(char *buf); - - -/* - * Brightness (backlight) subdriver - */ - -#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen" - -static struct backlight_device *ibm_backlight_device; -static int brightness_offset = 0x31; -static int brightness_mode; -static unsigned int brightness_enable; /* 0 = no, 1 = yes, 2 = auto */ - -static int brightness_init(struct ibm_init_struct *iibm); -static void brightness_exit(void); -static int brightness_get(struct backlight_device *bd); -static int brightness_set(int value); -static int brightness_update_status(struct backlight_device *bd); -static int brightness_read(char *p); -static int brightness_write(char *buf); - - -/* - * CMOS subdriver - */ - -static int cmos_read(char *p); -static int cmos_write(char *buf); - - -/* - * Dock subdriver - */ - -#ifdef CONFIG_THINKPAD_ACPI_DOCK -static acpi_handle pci_handle; -static acpi_handle dock_handle; - -static void dock_notify(struct ibm_struct *ibm, u32 event); -static int dock_read(char *p); -static int dock_write(char *buf); -#endif /* CONFIG_THINKPAD_ACPI_DOCK */ - - -/* - * EC dump subdriver - */ - -static int ecdump_read(char *p) ; -static int ecdump_write(char *buf); - - -/* - * Fan subdriver - */ - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ - TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ - - TPACPI_FAN_LAST_LEVEL = 0x100, /* Use cached last-seen fan level */ -}; - -enum fan_status_access_mode { - TPACPI_FAN_NONE = 0, /* No fan status or control */ - TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - TPACPI_FAN_WR_NONE = 0, /* No fan control */ - TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - TPACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - TPACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - TPACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -static int fan_control_allowed; - -static enum fan_status_access_mode fan_status_access_mode; -static enum fan_control_access_mode fan_control_access_mode; -static enum fan_control_commands fan_control_commands; -static u8 fan_control_initial_status; -static u8 fan_control_desired_level; -static int fan_watchdog_maxinterval; - -static struct mutex fan_mutex; - -static acpi_handle fans_handle, gfan_handle, sfan_handle; - -static int fan_init(struct ibm_init_struct *iibm); -static void fan_exit(void); -static int fan_get_status(u8 *status); -static int fan_get_status_safe(u8 *status); -static int fan_get_speed(unsigned int *speed); -static void fan_update_desired_level(u8 status); -static void fan_watchdog_fire(struct work_struct *ignored); -static void fan_watchdog_reset(void); -static int fan_set_level(int level); -static int fan_set_level_safe(int level); -static int fan_set_enable(void); -static int fan_set_disable(void); -static int fan_set_speed(int speed); -static int fan_read(char *p); -static int fan_write(char *buf); -static int fan_write_cmd_level(const char *cmd, int *rc); -static int fan_write_cmd_enable(const char *cmd, int *rc); -static int fan_write_cmd_disable(const char *cmd, int *rc); -static int fan_write_cmd_speed(const char *cmd, int *rc); -static int fan_write_cmd_watchdog(const char *cmd, int *rc); - - -/* - * Hotkey subdriver - */ - -enum { /* hot key scan codes (derived from ACPI DSDT) */ - TP_ACPI_HOTKEYSCAN_FNF1 = 0, - TP_ACPI_HOTKEYSCAN_FNF2, - TP_ACPI_HOTKEYSCAN_FNF3, - TP_ACPI_HOTKEYSCAN_FNF4, - TP_ACPI_HOTKEYSCAN_FNF5, - TP_ACPI_HOTKEYSCAN_FNF6, - TP_ACPI_HOTKEYSCAN_FNF7, - TP_ACPI_HOTKEYSCAN_FNF8, - TP_ACPI_HOTKEYSCAN_FNF9, - TP_ACPI_HOTKEYSCAN_FNF10, - TP_ACPI_HOTKEYSCAN_FNF11, - TP_ACPI_HOTKEYSCAN_FNF12, - TP_ACPI_HOTKEYSCAN_FNBACKSPACE, - TP_ACPI_HOTKEYSCAN_FNINSERT, - TP_ACPI_HOTKEYSCAN_FNDELETE, - TP_ACPI_HOTKEYSCAN_FNHOME, - TP_ACPI_HOTKEYSCAN_FNEND, - TP_ACPI_HOTKEYSCAN_FNPAGEUP, - TP_ACPI_HOTKEYSCAN_FNPAGEDOWN, - TP_ACPI_HOTKEYSCAN_FNSPACE, - TP_ACPI_HOTKEYSCAN_VOLUMEUP, - TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, - TP_ACPI_HOTKEYSCAN_MUTE, - TP_ACPI_HOTKEYSCAN_THINKPAD, -}; - -static int hotkey_orig_status; -static u32 hotkey_orig_mask; - -static struct mutex hotkey_mutex; - -static int hotkey_init(struct ibm_init_struct *iibm); -static void hotkey_exit(void); -static void hotkey_notify(struct ibm_struct *ibm, u32 event); -static int hotkey_read(char *p); -static int hotkey_write(char *buf); - - -/* - * LED subdriver - */ - -enum led_access_mode { - TPACPI_LED_NONE = 0, - TPACPI_LED_570, /* 570 */ - TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - TPACPI_LED_NEW, /* all others */ -}; - -enum { /* For TPACPI_LED_OLD */ - TPACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ - TPACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ - TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ -}; - -static enum led_access_mode led_supported; -static acpi_handle led_handle; - -static int led_init(struct ibm_init_struct *iibm); -static int led_read(char *p); -static int led_write(char *buf); - -/* - * Light (thinklight) subdriver - */ - -static acpi_handle lght_handle, ledb_handle; - -static int light_init(struct ibm_init_struct *iibm); -static int light_read(char *p); -static int light_write(char *buf); - - -/* - * Thermal subdriver - */ - -enum thermal_access_mode { - TPACPI_THERMAL_NONE = 0, /* No thermal support */ - TPACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - TPACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - TPACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - TPACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -enum { /* TPACPI_THERMAL_TPEC_* */ - TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */ - TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */ - TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */ -}; - -#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[TPACPI_MAX_THERMAL_SENSORS]; -}; - -static enum thermal_access_mode thermal_read_mode; - -static int thermal_init(struct ibm_init_struct *iibm); -static int thermal_get_sensor(int idx, s32 *value); -static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); -static int thermal_read(char *p); - - -/* - * Video subdriver - */ - -enum video_access_mode { - TPACPI_VIDEO_NONE = 0, - TPACPI_VIDEO_570, /* 570 */ - TPACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - TPACPI_VIDEO_NEW, /* all others */ -}; - -enum { /* video status flags, based on VIDEO_570 */ - TP_ACPI_VIDEO_S_LCD = 0x01, /* LCD output enabled */ - TP_ACPI_VIDEO_S_CRT = 0x02, /* CRT output enabled */ - TP_ACPI_VIDEO_S_DVI = 0x08, /* DVI output enabled */ -}; - -enum { /* TPACPI_VIDEO_570 constants */ - TP_ACPI_VIDEO_570_PHSCMD = 0x87, /* unknown magic constant :( */ - TP_ACPI_VIDEO_570_PHSMASK = 0x03, /* PHS bits that map to - * video_status_flags */ - TP_ACPI_VIDEO_570_PHS2CMD = 0x8b, /* unknown magic constant :( */ - TP_ACPI_VIDEO_570_PHS2SET = 0x80, /* unknown magic constant :( */ -}; - -static enum video_access_mode video_supported; -static int video_orig_autosw; -static acpi_handle vid_handle, vid2_handle; - -static int video_init(struct ibm_init_struct *iibm); -static void video_exit(void); -static int video_outputsw_get(void); -static int video_outputsw_set(int status); -static int video_autosw_get(void); -static int video_autosw_set(int enable); -static int video_outputsw_cycle(void); -static int video_expand_toggle(void); -static int video_read(char *p); -static int video_write(char *buf); - - -/* - * Volume subdriver - */ - -static int volume_offset = 0x30; - -static int volume_read(char *p); -static int volume_write(char *buf); - - -/* - * Wan subdriver - */ - -enum { - /* ACPI GWAN/SWAN bits */ - TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */ - TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */ - TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */ -}; - -static int wan_init(struct ibm_init_struct *iibm); -static int wan_get_radiosw(void); -static int wan_set_radiosw(int radio_on); -static int wan_read(char *p); -static int wan_write(char *buf); - - -#endif /* __THINKPAD_ACPI_H */ From f74a27d4bda42ee779940adaa34c5c196dda5d32 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:44 -0200 Subject: [PATCH 038/112] ACPI: thinkpad-acpi: spring cleanup part 2 Move most subdriver-related stuff imported from the header file closer to their subdriver code. Also, delete unneeded forward declarations. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 615 +++++++++++------------------------ 1 file changed, 186 insertions(+), 429 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 59b127cff1ec..e435b554a004 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -82,8 +82,6 @@ * 2004-08-09 0.1 initial release, support for X series */ -/* ==================================================== BEGIN HEADER */ - #include #include #include @@ -199,79 +197,22 @@ static const char *str_supported(int is_supported); /* ACPI HIDs */ #define IBM_HKEY_HID "IBM0068" -/* ACPI helpers */ -static int __must_check acpi_evalf(acpi_handle handle, - void *res, char *method, char *fmt, ...); -static int __must_check acpi_ec_read(int i, u8 * p); -static int __must_check acpi_ec_write(int i, u8 v); -static int __must_check _sta(acpi_handle handle); - -/* ACPI handles */ -static acpi_handle root_handle; /* root namespace */ -static acpi_handle ec_handle; /* EC */ -static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */ -static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */ - -static void drv_acpi_handle_init(char *name, - acpi_handle *handle, acpi_handle parent, - char **paths, int num_paths, char **path); -#define IBM_ACPIHANDLE_INIT(object) \ - drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ - object##_paths, ARRAY_SIZE(object##_paths), &object##_path) - -/* ThinkPad ACPI helpers */ -static int issue_thinkpad_cmos_command(int cmos_cmd); - -/* procfs support */ -static struct proc_dir_entry *proc_dir; - -/* procfs helpers */ -static int dispatch_procfs_read(char *page, char **start, off_t off, - int count, int *eof, void *data); -static int dispatch_procfs_write(struct file *file, - const char __user * userbuf, - unsigned long count, void *data); -static char *next_cmd(char **cmds); - /* sysfs support */ struct attribute_set { unsigned int members, max_members; struct attribute_group group; }; -static struct attribute_set *create_attr_set(unsigned int max_members, - const char* name); -#define destroy_attr_set(_set) \ - kfree(_set); -static int add_to_attr_set(struct attribute_set* s, struct attribute *attr); -static int add_many_to_attr_set(struct attribute_set* s, - struct attribute **attr, - unsigned int count); -#define register_attr_set_with_sysfs(_attr_set, _kobj) \ - sysfs_create_group(_kobj, &_attr_set->group) -static void delete_attr_set(struct attribute_set* s, struct kobject *kobj); - +/* Helpers */ static int parse_strtoul(const char *buf, unsigned long max, unsigned long *value); -/* Device model */ -static struct platform_device *tpacpi_pdev; -static struct platform_device *tpacpi_sensors_pdev; -static struct device *tpacpi_hwmon; -static struct platform_driver tpacpi_pdriver; -static struct input_dev *tpacpi_inputdev; -static int tpacpi_create_driver_attributes(struct device_driver *drv); -static void tpacpi_remove_driver_attributes(struct device_driver *drv); - /* Module */ static int experimental; static u32 dbg_level; static int force_load; static unsigned int hotkey_report_mode; -static int thinkpad_acpi_module_init(void); -static void thinkpad_acpi_module_exit(void); - /**************************************************************************** * Subdrivers @@ -354,365 +295,9 @@ struct thinkpad_id_data { char *model_str; }; - static struct thinkpad_id_data thinkpad_id; -static struct list_head tpacpi_all_drivers; - -static struct ibm_init_struct ibms_init[]; -static int set_ibm_param(const char *val, struct kernel_param *kp); -static int ibm_init(struct ibm_init_struct *iibm); -static void ibm_exit(struct ibm_struct *ibm); - - -/* - * procfs master subdriver - */ -static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm); -static int thinkpad_acpi_driver_read(char *p); - - -/* - * Bay subdriver - */ - -#ifdef CONFIG_THINKPAD_ACPI_BAY -static acpi_handle bay_handle, bay_ej_handle; -static acpi_handle bay2_handle, bay2_ej_handle; - -static int bay_init(struct ibm_init_struct *iibm); -static void bay_notify(struct ibm_struct *ibm, u32 event); -static int bay_read(char *p); -static int bay_write(char *buf); -#endif /* CONFIG_THINKPAD_ACPI_BAY */ - - -/* - * Beep subdriver - */ - -static acpi_handle beep_handle; - -static int beep_read(char *p); -static int beep_write(char *buf); - - -/* - * Bluetooth subdriver - */ - -enum { - /* ACPI GBDC/SBDC bits */ - TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */ - TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */ - TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */ -}; - -static int bluetooth_init(struct ibm_init_struct *iibm); -static int bluetooth_get_radiosw(void); -static int bluetooth_set_radiosw(int radio_on); -static int bluetooth_read(char *p); -static int bluetooth_write(char *buf); - - -/* - * Brightness (backlight) subdriver - */ - -#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen" - -static struct backlight_device *ibm_backlight_device; -static int brightness_offset = 0x31; -static int brightness_mode; -static unsigned int brightness_enable; /* 0 = no, 1 = yes, 2 = auto */ - -static int brightness_init(struct ibm_init_struct *iibm); -static void brightness_exit(void); -static int brightness_get(struct backlight_device *bd); -static int brightness_set(int value); -static int brightness_update_status(struct backlight_device *bd); -static int brightness_read(char *p); -static int brightness_write(char *buf); - - -/* - * CMOS subdriver - */ - -static int cmos_read(char *p); -static int cmos_write(char *buf); - - -/* - * Dock subdriver - */ - -#ifdef CONFIG_THINKPAD_ACPI_DOCK -static acpi_handle pci_handle; -static acpi_handle dock_handle; - -static void dock_notify(struct ibm_struct *ibm, u32 event); -static int dock_read(char *p); -static int dock_write(char *buf); -#endif /* CONFIG_THINKPAD_ACPI_DOCK */ - - -/* - * EC dump subdriver - */ - -static int ecdump_read(char *p) ; -static int ecdump_write(char *buf); - - -/* - * Fan subdriver - */ - -enum { /* Fan control constants */ - fan_status_offset = 0x2f, /* EC register 0x2f */ - fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) - * 0x84 must be read before 0x85 */ - - TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ - TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ - - TPACPI_FAN_LAST_LEVEL = 0x100, /* Use cached last-seen fan level */ -}; - -enum fan_status_access_mode { - TPACPI_FAN_NONE = 0, /* No fan status or control */ - TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ - TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ -}; - -enum fan_control_access_mode { - TPACPI_FAN_WR_NONE = 0, /* No fan control */ - TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ - TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ - TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ -}; - -enum fan_control_commands { - TPACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ - TPACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ - TPACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, - * and also watchdog cmd */ -}; - -static int fan_control_allowed; - -static enum fan_status_access_mode fan_status_access_mode; -static enum fan_control_access_mode fan_control_access_mode; -static enum fan_control_commands fan_control_commands; -static u8 fan_control_initial_status; -static u8 fan_control_desired_level; -static int fan_watchdog_maxinterval; - -static struct mutex fan_mutex; - -static acpi_handle fans_handle, gfan_handle, sfan_handle; - -static int fan_init(struct ibm_init_struct *iibm); -static void fan_exit(void); -static int fan_get_status(u8 *status); -static int fan_get_status_safe(u8 *status); -static int fan_get_speed(unsigned int *speed); -static void fan_update_desired_level(u8 status); -static void fan_watchdog_fire(struct work_struct *ignored); -static void fan_watchdog_reset(void); -static int fan_set_level(int level); -static int fan_set_level_safe(int level); -static int fan_set_enable(void); -static int fan_set_disable(void); -static int fan_set_speed(int speed); -static int fan_read(char *p); -static int fan_write(char *buf); -static int fan_write_cmd_level(const char *cmd, int *rc); -static int fan_write_cmd_enable(const char *cmd, int *rc); -static int fan_write_cmd_disable(const char *cmd, int *rc); -static int fan_write_cmd_speed(const char *cmd, int *rc); -static int fan_write_cmd_watchdog(const char *cmd, int *rc); - - -/* - * Hotkey subdriver - */ - -enum { /* hot key scan codes (derived from ACPI DSDT) */ - TP_ACPI_HOTKEYSCAN_FNF1 = 0, - TP_ACPI_HOTKEYSCAN_FNF2, - TP_ACPI_HOTKEYSCAN_FNF3, - TP_ACPI_HOTKEYSCAN_FNF4, - TP_ACPI_HOTKEYSCAN_FNF5, - TP_ACPI_HOTKEYSCAN_FNF6, - TP_ACPI_HOTKEYSCAN_FNF7, - TP_ACPI_HOTKEYSCAN_FNF8, - TP_ACPI_HOTKEYSCAN_FNF9, - TP_ACPI_HOTKEYSCAN_FNF10, - TP_ACPI_HOTKEYSCAN_FNF11, - TP_ACPI_HOTKEYSCAN_FNF12, - TP_ACPI_HOTKEYSCAN_FNBACKSPACE, - TP_ACPI_HOTKEYSCAN_FNINSERT, - TP_ACPI_HOTKEYSCAN_FNDELETE, - TP_ACPI_HOTKEYSCAN_FNHOME, - TP_ACPI_HOTKEYSCAN_FNEND, - TP_ACPI_HOTKEYSCAN_FNPAGEUP, - TP_ACPI_HOTKEYSCAN_FNPAGEDOWN, - TP_ACPI_HOTKEYSCAN_FNSPACE, - TP_ACPI_HOTKEYSCAN_VOLUMEUP, - TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, - TP_ACPI_HOTKEYSCAN_MUTE, - TP_ACPI_HOTKEYSCAN_THINKPAD, -}; - -static int hotkey_orig_status; -static u32 hotkey_orig_mask; - -static struct mutex hotkey_mutex; - -static int hotkey_init(struct ibm_init_struct *iibm); -static void hotkey_exit(void); -static void hotkey_notify(struct ibm_struct *ibm, u32 event); -static int hotkey_read(char *p); -static int hotkey_write(char *buf); - - -/* - * LED subdriver - */ - -enum led_access_mode { - TPACPI_LED_NONE = 0, - TPACPI_LED_570, /* 570 */ - TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - TPACPI_LED_NEW, /* all others */ -}; - -enum { /* For TPACPI_LED_OLD */ - TPACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ - TPACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ - TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ -}; - -static enum led_access_mode led_supported; -static acpi_handle led_handle; - -static int led_init(struct ibm_init_struct *iibm); -static int led_read(char *p); -static int led_write(char *buf); - -/* - * Light (thinklight) subdriver - */ - -static acpi_handle lght_handle, ledb_handle; - -static int light_init(struct ibm_init_struct *iibm); -static int light_read(char *p); -static int light_write(char *buf); - - -/* - * Thermal subdriver - */ - -enum thermal_access_mode { - TPACPI_THERMAL_NONE = 0, /* No thermal support */ - TPACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ - TPACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ - TPACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ - TPACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ -}; - -enum { /* TPACPI_THERMAL_TPEC_* */ - TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */ - TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */ - TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */ -}; - -#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ -struct ibm_thermal_sensors_struct { - s32 temp[TPACPI_MAX_THERMAL_SENSORS]; -}; - -static enum thermal_access_mode thermal_read_mode; - -static int thermal_init(struct ibm_init_struct *iibm); -static int thermal_get_sensor(int idx, s32 *value); -static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); -static int thermal_read(char *p); - - -/* - * Video subdriver - */ - -enum video_access_mode { - TPACPI_VIDEO_NONE = 0, - TPACPI_VIDEO_570, /* 570 */ - TPACPI_VIDEO_770, /* 600e/x, 770e, 770x */ - TPACPI_VIDEO_NEW, /* all others */ -}; - -enum { /* video status flags, based on VIDEO_570 */ - TP_ACPI_VIDEO_S_LCD = 0x01, /* LCD output enabled */ - TP_ACPI_VIDEO_S_CRT = 0x02, /* CRT output enabled */ - TP_ACPI_VIDEO_S_DVI = 0x08, /* DVI output enabled */ -}; - -enum { /* TPACPI_VIDEO_570 constants */ - TP_ACPI_VIDEO_570_PHSCMD = 0x87, /* unknown magic constant :( */ - TP_ACPI_VIDEO_570_PHSMASK = 0x03, /* PHS bits that map to - * video_status_flags */ - TP_ACPI_VIDEO_570_PHS2CMD = 0x8b, /* unknown magic constant :( */ - TP_ACPI_VIDEO_570_PHS2SET = 0x80, /* unknown magic constant :( */ -}; - -static enum video_access_mode video_supported; -static int video_orig_autosw; -static acpi_handle vid_handle, vid2_handle; - -static int video_init(struct ibm_init_struct *iibm); -static void video_exit(void); -static int video_outputsw_get(void); -static int video_outputsw_set(int status); -static int video_autosw_get(void); -static int video_autosw_set(int enable); -static int video_outputsw_cycle(void); -static int video_expand_toggle(void); -static int video_read(char *p); -static int video_write(char *buf); - - -/* - * Volume subdriver - */ - -static int volume_offset = 0x30; - -static int volume_read(char *p); -static int volume_write(char *buf); - - -/* - * Wan subdriver - */ - -enum { - /* ACPI GWAN/SWAN bits */ - TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */ - TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */ - TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */ -}; - -static int wan_init(struct ibm_init_struct *iibm); -static int wan_get_radiosw(void); -static int wan_set_radiosw(int radio_on); -static int wan_read(char *p); -static int wan_write(char *buf); - -/* ==================================================== END HEADER */ +static LIST_HEAD(tpacpi_all_drivers); MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); @@ -948,6 +533,10 @@ static int issue_thinkpad_cmos_command(int cmos_cmd) * ACPI device model */ +#define IBM_ACPIHANDLE_INIT(object) \ + drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ + object##_paths, ARRAY_SIZE(object##_paths), &object##_path) + static void drv_acpi_handle_init(char *name, acpi_handle *handle, acpi_handle parent, char **paths, int num_paths, char **path) @@ -1298,6 +887,9 @@ static struct attribute_set *create_attr_set(unsigned int max_members, return &sobj->s; } +#define destroy_attr_set(_set) \ + kfree(_set); + /* not multi-threaded safe, use it in a single thread per set */ static int add_to_attr_set(struct attribute_set* s, struct attribute *attr) { @@ -1334,6 +926,9 @@ static void delete_attr_set(struct attribute_set* s, struct kobject *kobj) destroy_attr_set(s); } +#define register_attr_set_with_sysfs(_attr_set, _kobj) \ + sysfs_create_group(_kobj, &_attr_set->group) + static int parse_strtoul(const char *buf, unsigned long max, unsigned long *value) { @@ -1403,6 +998,33 @@ static struct ibm_struct thinkpad_acpi_driver_data = { * Hotkey subdriver */ +enum { /* hot key scan codes (derived from ACPI DSDT) */ + TP_ACPI_HOTKEYSCAN_FNF1 = 0, + TP_ACPI_HOTKEYSCAN_FNF2, + TP_ACPI_HOTKEYSCAN_FNF3, + TP_ACPI_HOTKEYSCAN_FNF4, + TP_ACPI_HOTKEYSCAN_FNF5, + TP_ACPI_HOTKEYSCAN_FNF6, + TP_ACPI_HOTKEYSCAN_FNF7, + TP_ACPI_HOTKEYSCAN_FNF8, + TP_ACPI_HOTKEYSCAN_FNF9, + TP_ACPI_HOTKEYSCAN_FNF10, + TP_ACPI_HOTKEYSCAN_FNF11, + TP_ACPI_HOTKEYSCAN_FNF12, + TP_ACPI_HOTKEYSCAN_FNBACKSPACE, + TP_ACPI_HOTKEYSCAN_FNINSERT, + TP_ACPI_HOTKEYSCAN_FNDELETE, + TP_ACPI_HOTKEYSCAN_FNHOME, + TP_ACPI_HOTKEYSCAN_FNEND, + TP_ACPI_HOTKEYSCAN_FNPAGEUP, + TP_ACPI_HOTKEYSCAN_FNPAGEDOWN, + TP_ACPI_HOTKEYSCAN_FNSPACE, + TP_ACPI_HOTKEYSCAN_VOLUMEUP, + TP_ACPI_HOTKEYSCAN_VOLUMEDOWN, + TP_ACPI_HOTKEYSCAN_MUTE, + TP_ACPI_HOTKEYSCAN_THINKPAD, +}; + enum { /* Keys available through NVRAM polling */ TPACPI_HKEY_NVRAM_KNOWN_MASK = 0x00fb88c0U, TPACPI_HKEY_NVRAM_GOOD_MASK = 0x00fb8000U, @@ -1464,6 +1086,8 @@ static unsigned int hotkey_config_change; #endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ +static struct mutex hotkey_mutex; + static int hotkey_orig_status; static u32 hotkey_orig_mask; static u32 hotkey_all_mask; @@ -2635,6 +2259,16 @@ static struct ibm_struct hotkey_driver_data = { * Bluetooth subdriver */ +enum { + /* ACPI GBDC/SBDC bits */ + TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */ + TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */ + TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */ +}; + +static int bluetooth_get_radiosw(void); +static int bluetooth_set_radiosw(int radio_on); + /* sysfs bluetooth enable ---------------------------------------------- */ static ssize_t bluetooth_enable_show(struct device *dev, struct device_attribute *attr, @@ -2799,6 +2433,16 @@ static struct ibm_struct bluetooth_driver_data = { * Wan subdriver */ +enum { + /* ACPI GWAN/SWAN bits */ + TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */ + TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */ + TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */ +}; + +static int wan_get_radiosw(void); +static int wan_set_radiosw(int radio_on); + /* sysfs wan enable ---------------------------------------------------- */ static ssize_t wan_enable_show(struct device *dev, struct device_attribute *attr, @@ -2962,9 +2606,33 @@ static struct ibm_struct wan_driver_data = { * Video subdriver */ +enum video_access_mode { + TPACPI_VIDEO_NONE = 0, + TPACPI_VIDEO_570, /* 570 */ + TPACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + TPACPI_VIDEO_NEW, /* all others */ +}; + +enum { /* video status flags, based on VIDEO_570 */ + TP_ACPI_VIDEO_S_LCD = 0x01, /* LCD output enabled */ + TP_ACPI_VIDEO_S_CRT = 0x02, /* CRT output enabled */ + TP_ACPI_VIDEO_S_DVI = 0x08, /* DVI output enabled */ +}; + +enum { /* TPACPI_VIDEO_570 constants */ + TP_ACPI_VIDEO_570_PHSCMD = 0x87, /* unknown magic constant :( */ + TP_ACPI_VIDEO_570_PHSMASK = 0x03, /* PHS bits that map to + * video_status_flags */ + TP_ACPI_VIDEO_570_PHS2CMD = 0x8b, /* unknown magic constant :( */ + TP_ACPI_VIDEO_570_PHS2SET = 0x80, /* unknown magic constant :( */ +}; + static enum video_access_mode video_supported; static int video_orig_autosw; +static int video_autosw_get(void); +static int video_autosw_set(int enable); + IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ "\\_SB.PCI0.VID0", /* 770e */ @@ -3370,6 +3038,10 @@ static struct ibm_struct light_driver_data = { #ifdef CONFIG_THINKPAD_ACPI_DOCK +static void dock_notify(struct ibm_struct *ibm, u32 event); +static int dock_read(char *p); +static int dock_write(char *buf); + IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ "\\_SB.PCI0.PCI1.DOCK", /* all others */ @@ -3524,6 +3196,7 @@ static int dock_write(char *buf) */ #ifdef CONFIG_THINKPAD_ACPI_BAY + IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ @@ -3741,6 +3414,19 @@ static struct ibm_struct cmos_driver_data = { * LED subdriver */ +enum led_access_mode { + TPACPI_LED_NONE = 0, + TPACPI_LED_570, /* 570 */ + TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + TPACPI_LED_NEW, /* all others */ +}; + +enum { /* For TPACPI_LED_OLD */ + TPACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */ + TPACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */ + TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ +}; + static enum led_access_mode led_supported; IBM_HANDLE(led, ec, "SLED", /* 570 */ @@ -3930,8 +3616,30 @@ static struct ibm_struct beep_driver_data = { * Thermal subdriver */ +enum thermal_access_mode { + TPACPI_THERMAL_NONE = 0, /* No thermal support */ + TPACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + TPACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + TPACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + TPACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +enum { /* TPACPI_THERMAL_TPEC_* */ + TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */ + TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */ + TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */ +}; + +#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[TPACPI_MAX_THERMAL_SENSORS]; +}; + static enum thermal_access_mode thermal_read_mode; +static int thermal_get_sensor(int idx, s32 *value); +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); + /* sysfs temp##_input -------------------------------------------------- */ static ssize_t thermal_temp_input_show(struct device *dev, @@ -4306,7 +4014,16 @@ static struct ibm_struct ecdump_driver_data = { * Backlight/brightness subdriver */ +#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen" + static struct backlight_device *ibm_backlight_device; +static int brightness_offset = 0x31; +static int brightness_mode; +static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ + +static int brightness_get(struct backlight_device *bd); +static int brightness_set(int value); +static int brightness_update_status(struct backlight_device *bd); static struct backlight_ops ibm_backlight_data = { .get_brightness = brightness_get, @@ -4628,6 +4345,8 @@ static struct ibm_struct brightness_driver_data = { * Volume subdriver */ +static int volume_offset = 0x30; + static int volume_read(char *p) { int len = 0; @@ -4819,15 +4538,59 @@ static struct ibm_struct volume_driver_data = { * but the ACPI tables just mention level 7. */ +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ + TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ + + TPACPI_FAN_LAST_LEVEL = 0x100, /* Use cached last-seen fan level */ +}; + +enum fan_status_access_mode { + TPACPI_FAN_NONE = 0, /* No fan status or control */ + TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + TPACPI_FAN_WR_NONE = 0, /* No fan control */ + TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + TPACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + TPACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + TPACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +static int fan_control_allowed; + static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; static enum fan_control_commands fan_control_commands; static u8 fan_control_initial_status; static u8 fan_control_desired_level; - -static void fan_watchdog_fire(struct work_struct *ignored); static int fan_watchdog_maxinterval; + +static struct mutex fan_mutex; + +static int fan_get_status(u8 *status); +static int fan_get_status_safe(u8 *status); +static int fan_get_speed(unsigned int *speed); +static void fan_update_desired_level(u8 status); +static void fan_watchdog_fire(struct work_struct *ignored); +static void fan_watchdog_reset(void); +static int fan_set_level(int level); +static int fan_set_level_safe(int level); +static int fan_set_enable(void); + static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ @@ -5710,9 +5473,6 @@ static struct device_attribute dev_attr_thinkpad_acpi_pdev_name = /* /proc support */ static struct proc_dir_entry *proc_dir; -/* Subdriver registry */ -static LIST_HEAD(tpacpi_all_drivers); - /* * Module and infrastructure proble, init and exit handling @@ -5727,6 +5487,8 @@ static const char * __init str_supported(int is_supported) } #endif /* CONFIG_THINKPAD_ACPI_DEBUG */ +static void ibm_exit(struct ibm_struct *ibm); + static int __init ibm_init(struct ibm_init_struct *iibm) { int ret; @@ -6042,25 +5804,18 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) return -EINVAL; } -static int experimental; module_param(experimental, int, 0); -static u32 dbg_level; module_param_named(debug, dbg_level, uint, 0); -static int force_load; module_param(force_load, bool, 0); -static int fan_control_allowed; module_param_named(fan_control, fan_control_allowed, bool, 0); -static int brightness_mode; module_param_named(brightness_mode, brightness_mode, int, 0); -static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ module_param(brightness_enable, uint, 0); -static unsigned int hotkey_report_mode; module_param(hotkey_report_mode, uint, 0); #define IBM_PARAM(feature) \ @@ -6084,6 +5839,8 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); +static void thinkpad_acpi_module_exit(void); + static int __init thinkpad_acpi_module_init(void) { int ret, i; From b21a15f6d065e837076cf417720afe1c3d6ed10d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:45 -0200 Subject: [PATCH 039/112] ACPI: thinkpad-acpi: spring cleanup part 3 Reorder code in the file to get rid of more of the forward declarations, and to make things cleaner and more organized. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 1495 +++++++++++++++++----------------- 1 file changed, 735 insertions(+), 760 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index e435b554a004..b6293a40132e 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -113,28 +113,6 @@ #include -/**************************************************************************** - * Main driver - */ - -#define IBM_NAME "thinkpad" -#define IBM_DESC "ThinkPad ACPI Extras" -#define IBM_FILE IBM_NAME "_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" -#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net" - -#define IBM_PROC_DIR "ibm" -#define IBM_ACPI_EVENT_PREFIX "ibm" -#define IBM_DRVR_NAME IBM_FILE -#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon" - -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG - -#define IBM_MAX_ACPI_ARGS 3 /* ThinkPad CMOS commands */ #define TP_CMOS_VOLUME_DOWN 0 @@ -169,11 +147,70 @@ enum { TP_NVRAM_POS_LEVEL_VOLUME = 0, }; -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) +/* ACPI HIDs */ +#define IBM_HKEY_HID "IBM0068" + +/* Input IDs */ +#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */ +#define TPACPI_HKEY_INPUT_VERSION 0x4101 + + +/**************************************************************************** + * Main driver + */ + +/* Module */ +#define IBM_NAME "thinkpad" +#define IBM_DESC "ThinkPad ACPI Extras" +#define IBM_FILE IBM_NAME "_acpi" +#define IBM_URL "http://ibm-acpi.sf.net/" +#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net" + +#define IBM_PROC_DIR "ibm" +#define IBM_ACPI_EVENT_PREFIX "ibm" +#define IBM_DRVR_NAME IBM_FILE +#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon" + +#define IBM_MAX_ACPI_ARGS 3 + +MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); +MODULE_DESCRIPTION(IBM_DESC); +MODULE_VERSION(IBM_VERSION); +MODULE_LICENSE("GPL"); + +/* Please remove this in year 2009 */ +MODULE_ALIAS("ibm_acpi"); + +/* + * DMI matching for module autoloading + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads + * + * Only models listed in thinkwiki will be supported, so add yours + * if it is not there yet. + */ +#define IBM_BIOS_MODULE_ALIAS(__type) \ + MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") + +/* Non-ancient thinkpads */ +MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); +MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); + +/* Ancient thinkpad BIOSes have to be identified by + * BIOS type or model number, and there are far less + * BIOS types than model numbers... */ +IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]"); +IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); +IBM_BIOS_MODULE_ALIAS("K[U,X-Z]"); /* Debugging */ +#define IBM_LOG IBM_FILE ": " +#define IBM_ERR KERN_ERR IBM_LOG +#define IBM_NOTICE KERN_NOTICE IBM_LOG +#define IBM_INFO KERN_INFO IBM_LOG +#define IBM_DEBUG KERN_DEBUG IBM_LOG + #define TPACPI_DBG_ALL 0xffff #define TPACPI_DBG_ALL 0xffff #define TPACPI_DBG_INIT 0x0001 @@ -189,33 +226,13 @@ static const char *str_supported(int is_supported); #define vdbg_printk(a_dbg_level, format, arg...) #endif -/* Input IDs */ -#define TPACPI_HKEY_INPUT_VENDOR PCI_VENDOR_ID_IBM -#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */ -#define TPACPI_HKEY_INPUT_VERSION 0x4101 - -/* ACPI HIDs */ -#define IBM_HKEY_HID "IBM0068" - -/* sysfs support */ -struct attribute_set { - unsigned int members, max_members; - struct attribute_group group; -}; - -/* Helpers */ -static int parse_strtoul(const char *buf, unsigned long max, - unsigned long *value); - -/* Module */ -static int experimental; -static u32 dbg_level; -static int force_load; -static unsigned int hotkey_report_mode; +#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) /**************************************************************************** - * Subdrivers + * Driver-wide structs and misc. variables */ struct ibm_struct; @@ -297,39 +314,6 @@ struct thinkpad_id_data { }; static struct thinkpad_id_data thinkpad_id; -static LIST_HEAD(tpacpi_all_drivers); - -MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); -MODULE_DESCRIPTION(IBM_DESC); -MODULE_VERSION(IBM_VERSION); -MODULE_LICENSE("GPL"); - -/* Please remove this in year 2009 */ -MODULE_ALIAS("ibm_acpi"); - -/* - * DMI matching for module autoloading - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads - * - * Only models listed in thinkwiki will be supported, so add yours - * if it is not there yet. - */ -#define IBM_BIOS_MODULE_ALIAS(__type) \ - MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") - -/* Non-ancient thinkpads */ -MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); -MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); - -/* Ancient thinkpad BIOSes have to be identified by - * BIOS type or model number, and there are far less - * BIOS types than model numbers... */ -IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]"); -IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); -IBM_BIOS_MODULE_ALIAS("K[U,X-Z]"); - #define __unused __attribute__ ((unused)) static enum { @@ -338,6 +322,9 @@ static enum { TPACPI_LIFE_EXITING, } tpacpi_lifecycle; +static int experimental; +static u32 dbg_level; + /**************************************************************************** **************************************************************************** * @@ -370,11 +357,6 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ - -/************************************************************************* - * Misc ACPI handles - */ - IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ @@ -749,7 +731,7 @@ static struct platform_device *tpacpi_sensors_pdev; static struct device *tpacpi_hwmon; static struct input_dev *tpacpi_inputdev; static struct mutex tpacpi_inputdev_send_mutex; - +static LIST_HEAD(tpacpi_all_drivers); static int tpacpi_resume_handler(struct platform_device *pdev) { @@ -780,87 +762,15 @@ static struct platform_driver tpacpi_hwmon_pdriver = { }, }; -/************************************************************************* - * thinkpad-acpi driver attributes - */ - -/* interface_version --------------------------------------------------- */ -static ssize_t tpacpi_driver_interface_version_show( - struct device_driver *drv, - char *buf) -{ - return snprintf(buf, PAGE_SIZE, "0x%08x\n", TPACPI_SYSFS_VERSION); -} - -static DRIVER_ATTR(interface_version, S_IRUGO, - tpacpi_driver_interface_version_show, NULL); - -/* debug_level --------------------------------------------------------- */ -static ssize_t tpacpi_driver_debug_show(struct device_driver *drv, - char *buf) -{ - return snprintf(buf, PAGE_SIZE, "0x%04x\n", dbg_level); -} - -static ssize_t tpacpi_driver_debug_store(struct device_driver *drv, - const char *buf, size_t count) -{ - unsigned long t; - - if (parse_strtoul(buf, 0xffff, &t)) - return -EINVAL; - - dbg_level = t; - - return count; -} - -static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, - tpacpi_driver_debug_show, tpacpi_driver_debug_store); - -/* version ------------------------------------------------------------- */ -static ssize_t tpacpi_driver_version_show(struct device_driver *drv, - char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%s v%s\n", IBM_DESC, IBM_VERSION); -} - -static DRIVER_ATTR(version, S_IRUGO, - tpacpi_driver_version_show, NULL); - -/* --------------------------------------------------------------------- */ - -static struct driver_attribute* tpacpi_driver_attributes[] = { - &driver_attr_debug_level, &driver_attr_version, - &driver_attr_interface_version, -}; - -static int __init tpacpi_create_driver_attributes(struct device_driver *drv) -{ - int i, res; - - i = 0; - res = 0; - while (!res && i < ARRAY_SIZE(tpacpi_driver_attributes)) { - res = driver_create_file(drv, tpacpi_driver_attributes[i]); - i++; - } - - return res; -} - -static void tpacpi_remove_driver_attributes(struct device_driver *drv) -{ - int i; - - for(i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++) - driver_remove_file(drv, tpacpi_driver_attributes[i]); -} - /************************************************************************* * sysfs support helpers */ +struct attribute_set { + unsigned int members, max_members; + struct attribute_group group; +}; + struct attribute_set_obj { struct attribute_set s; struct attribute *a; @@ -945,6 +855,83 @@ static int parse_strtoul(const char *buf, return 0; } +/************************************************************************* + * thinkpad-acpi driver attributes + */ + +/* interface_version --------------------------------------------------- */ +static ssize_t tpacpi_driver_interface_version_show( + struct device_driver *drv, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "0x%08x\n", TPACPI_SYSFS_VERSION); +} + +static DRIVER_ATTR(interface_version, S_IRUGO, + tpacpi_driver_interface_version_show, NULL); + +/* debug_level --------------------------------------------------------- */ +static ssize_t tpacpi_driver_debug_show(struct device_driver *drv, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "0x%04x\n", dbg_level); +} + +static ssize_t tpacpi_driver_debug_store(struct device_driver *drv, + const char *buf, size_t count) +{ + unsigned long t; + + if (parse_strtoul(buf, 0xffff, &t)) + return -EINVAL; + + dbg_level = t; + + return count; +} + +static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, + tpacpi_driver_debug_show, tpacpi_driver_debug_store); + +/* version ------------------------------------------------------------- */ +static ssize_t tpacpi_driver_version_show(struct device_driver *drv, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s v%s\n", IBM_DESC, IBM_VERSION); +} + +static DRIVER_ATTR(version, S_IRUGO, + tpacpi_driver_version_show, NULL); + +/* --------------------------------------------------------------------- */ + +static struct driver_attribute* tpacpi_driver_attributes[] = { + &driver_attr_debug_level, &driver_attr_version, + &driver_attr_interface_version, +}; + +static int __init tpacpi_create_driver_attributes(struct device_driver *drv) +{ + int i, res; + + i = 0; + res = 0; + while (!res && i < ARRAY_SIZE(tpacpi_driver_attributes)) { + res = driver_create_file(drv, tpacpi_driver_attributes[i]); + i++; + } + + return res; +} + +static void tpacpi_remove_driver_attributes(struct device_driver *drv) +{ + int i; + + for(i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++) + driver_remove_file(drv, tpacpi_driver_attributes[i]); +} + /**************************************************************************** **************************************************************************** * @@ -1094,6 +1081,8 @@ static u32 hotkey_all_mask; static u32 hotkey_reserved_mask; static u32 hotkey_mask; +static unsigned int hotkey_report_mode; + static u16 *hotkey_keycode_map; static struct attribute_set *hotkey_dev_attributes; @@ -3637,8 +3626,87 @@ struct ibm_thermal_sensors_struct { static enum thermal_access_mode thermal_read_mode; -static int thermal_get_sensor(int idx, s32 *value); -static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s); +/* idx is zero-based */ +static int thermal_get_sensor(int idx, s32 *value) +{ + int t; + s8 tmp; + char tmpi[5]; + + t = TP_EC_THERMAL_TMP0; + + switch (thermal_read_mode) { +#if TPACPI_MAX_THERMAL_SENSORS >= 16 + case TPACPI_THERMAL_TPEC_16: + if (idx >= 8 && idx <= 15) { + t = TP_EC_THERMAL_TMP8; + idx -= 8; + } + /* fallthrough */ +#endif + case TPACPI_THERMAL_TPEC_8: + if (idx <= 7) { + if (!acpi_ec_read(t + idx, &tmp)) + return -EIO; + *value = tmp * 1000; + return 0; + } + break; + + case TPACPI_THERMAL_ACPI_UPDT: + if (idx <= 7) { + snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx); + if (!acpi_evalf(ec_handle, NULL, "UPDT", "v")) + return -EIO; + if (!acpi_evalf(ec_handle, &t, tmpi, "d")) + return -EIO; + *value = (t - 2732) * 100; + return 0; + } + break; + + case TPACPI_THERMAL_ACPI_TMP07: + if (idx <= 7) { + snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx); + if (!acpi_evalf(ec_handle, &t, tmpi, "d")) + return -EIO; + if (t > 127 || t < -127) + t = TP_EC_THERMAL_TMP_NA; + *value = t * 1000; + return 0; + } + break; + + case TPACPI_THERMAL_NONE: + default: + return -ENOSYS; + } + + return -EINVAL; +} + +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s) +{ + int res, i; + int n; + + n = 8; + i = 0; + + if (!s) + return -EINVAL; + + if (thermal_read_mode == TPACPI_THERMAL_TPEC_16) + n = 16; + + for(i = 0 ; i < n; i++) { + res = thermal_get_sensor(i, &s->temp[i]); + if (res) + return res; + } + + return n; +} /* sysfs temp##_input -------------------------------------------------- */ @@ -3830,88 +3898,6 @@ static void thermal_exit(void) } } -/* idx is zero-based */ -static int thermal_get_sensor(int idx, s32 *value) -{ - int t; - s8 tmp; - char tmpi[5]; - - t = TP_EC_THERMAL_TMP0; - - switch (thermal_read_mode) { -#if TPACPI_MAX_THERMAL_SENSORS >= 16 - case TPACPI_THERMAL_TPEC_16: - if (idx >= 8 && idx <= 15) { - t = TP_EC_THERMAL_TMP8; - idx -= 8; - } - /* fallthrough */ -#endif - case TPACPI_THERMAL_TPEC_8: - if (idx <= 7) { - if (!acpi_ec_read(t + idx, &tmp)) - return -EIO; - *value = tmp * 1000; - return 0; - } - break; - - case TPACPI_THERMAL_ACPI_UPDT: - if (idx <= 7) { - snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx); - if (!acpi_evalf(ec_handle, NULL, "UPDT", "v")) - return -EIO; - if (!acpi_evalf(ec_handle, &t, tmpi, "d")) - return -EIO; - *value = (t - 2732) * 100; - return 0; - } - break; - - case TPACPI_THERMAL_ACPI_TMP07: - if (idx <= 7) { - snprintf(tmpi, sizeof(tmpi), "TMP%c", '0' + idx); - if (!acpi_evalf(ec_handle, &t, tmpi, "d")) - return -EIO; - if (t > 127 || t < -127) - t = TP_EC_THERMAL_TMP_NA; - *value = t * 1000; - return 0; - } - break; - - case TPACPI_THERMAL_NONE: - default: - return -ENOSYS; - } - - return -EINVAL; -} - -static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s) -{ - int res, i; - int n; - - n = 8; - i = 0; - - if (!s) - return -EINVAL; - - if (thermal_read_mode == TPACPI_THERMAL_TPEC_16) - n = 16; - - for(i = 0 ; i < n; i++) { - res = thermal_get_sensor(i, &s->temp[i]); - if (res) - return res; - } - - return n; -} - static int thermal_read(char *p) { int len = 0; @@ -4021,16 +4007,103 @@ static int brightness_offset = 0x31; static int brightness_mode; static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ -static int brightness_get(struct backlight_device *bd); -static int brightness_set(int value); -static int brightness_update_status(struct backlight_device *bd); +static struct mutex brightness_mutex; + +/* + * ThinkPads can read brightness from two places: EC 0x31, or + * CMOS NVRAM byte 0x5E, bits 0-3. + */ +static int brightness_get(struct backlight_device *bd) +{ + u8 lec = 0, lcmos = 0, level = 0; + + if (brightness_mode & 1) { + if (!acpi_ec_read(brightness_offset, &lec)) + return -EIO; + lec &= (tp_features.bright_16levels)? 0x0f : 0x07; + level = lec; + }; + if (brightness_mode & 2) { + lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) + & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) + >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; + lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07; + level = lcmos; + } + + if (brightness_mode == 3 && lec != lcmos) { + printk(IBM_ERR + "CMOS NVRAM (%u) and EC (%u) do not agree " + "on display brightness level\n", + (unsigned int) lcmos, + (unsigned int) lec); + return -EIO; + } + + return level; +} + +/* May return EINTR which can always be mapped to ERESTARTSYS */ +static int brightness_set(int value) +{ + int cmos_cmd, inc, i, res; + int current_value; + + if (value > ((tp_features.bright_16levels)? 15 : 7)) + return -EINVAL; + + res = mutex_lock_interruptible(&brightness_mutex); + if (res < 0) + return res; + + current_value = brightness_get(NULL); + if (current_value < 0) { + res = current_value; + goto errout; + } + + cmos_cmd = value > current_value ? + TP_CMOS_BRIGHTNESS_UP : + TP_CMOS_BRIGHTNESS_DOWN; + inc = (value > current_value)? 1 : -1; + + res = 0; + for (i = current_value; i != value; i += inc) { + if ((brightness_mode & 2) && + issue_thinkpad_cmos_command(cmos_cmd)) { + res = -EIO; + goto errout; + } + if ((brightness_mode & 1) && + !acpi_ec_write(brightness_offset, i + inc)) { + res = -EIO; + goto errout;; + } + } + +errout: + mutex_unlock(&brightness_mutex); + return res; +} + +/* sysfs backlight class ----------------------------------------------- */ + +static int brightness_update_status(struct backlight_device *bd) +{ + /* it is the backlight class's job (caller) to handle + * EINTR and other errors properly */ + return brightness_set( + (bd->props.fb_blank == FB_BLANK_UNBLANK && + bd->props.power == FB_BLANK_UNBLANK) ? + bd->props.brightness : 0); +} static struct backlight_ops ibm_backlight_data = { .get_brightness = brightness_get, .update_status = brightness_update_status, }; -static struct mutex brightness_mutex; +/* --------------------------------------------------------------------- */ static int __init tpacpi_query_bcll_levels(acpi_handle handle) { @@ -4196,93 +4269,6 @@ static void brightness_exit(void) } } -static int brightness_update_status(struct backlight_device *bd) -{ - /* it is the backlight class's job (caller) to handle - * EINTR and other errors properly */ - return brightness_set( - (bd->props.fb_blank == FB_BLANK_UNBLANK && - bd->props.power == FB_BLANK_UNBLANK) ? - bd->props.brightness : 0); -} - -/* - * ThinkPads can read brightness from two places: EC 0x31, or - * CMOS NVRAM byte 0x5E, bits 0-3. - */ -static int brightness_get(struct backlight_device *bd) -{ - u8 lec = 0, lcmos = 0, level = 0; - - if (brightness_mode & 1) { - if (!acpi_ec_read(brightness_offset, &lec)) - return -EIO; - lec &= (tp_features.bright_16levels)? 0x0f : 0x07; - level = lec; - }; - if (brightness_mode & 2) { - lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) - & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) - >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; - lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07; - level = lcmos; - } - - if (brightness_mode == 3 && lec != lcmos) { - printk(IBM_ERR - "CMOS NVRAM (%u) and EC (%u) do not agree " - "on display brightness level\n", - (unsigned int) lcmos, - (unsigned int) lec); - return -EIO; - } - - return level; -} - -/* May return EINTR which can always be mapped to ERESTARTSYS */ -static int brightness_set(int value) -{ - int cmos_cmd, inc, i, res; - int current_value; - - if (value > ((tp_features.bright_16levels)? 15 : 7)) - return -EINVAL; - - res = mutex_lock_interruptible(&brightness_mutex); - if (res < 0) - return res; - - current_value = brightness_get(NULL); - if (current_value < 0) { - res = current_value; - goto errout; - } - - cmos_cmd = value > current_value ? - TP_CMOS_BRIGHTNESS_UP : - TP_CMOS_BRIGHTNESS_DOWN; - inc = (value > current_value)? 1 : -1; - - res = 0; - for (i = current_value; i != value; i += inc) { - if ((brightness_mode & 2) && - issue_thinkpad_cmos_command(cmos_cmd)) { - res = -EIO; - goto errout; - } - if ((brightness_mode & 1) && - !acpi_ec_write(brightness_offset, i + inc)) { - res = -EIO; - goto errout;; - } - } - -errout: - mutex_unlock(&brightness_mutex); - return res; -} - static int brightness_read(char *p) { int len = 0; @@ -4581,16 +4567,7 @@ static int fan_watchdog_maxinterval; static struct mutex fan_mutex; -static int fan_get_status(u8 *status); -static int fan_get_status_safe(u8 *status); -static int fan_get_speed(unsigned int *speed); -static void fan_update_desired_level(u8 status); static void fan_watchdog_fire(struct work_struct *ignored); -static void fan_watchdog_reset(void); -static int fan_set_level(int level); -static int fan_set_level_safe(int level); -static int fan_set_enable(void); - static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ @@ -4601,6 +4578,321 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ +/* + * Call with fan_mutex held + */ +static void fan_update_desired_level(u8 status) +{ + if ((status & + (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) { + if (status > 7) + fan_control_desired_level = 7; + else + fan_control_desired_level = status; + } +} + +static int fan_get_status(u8 *status) +{ + u8 s; + + /* TODO: + * Add TPACPI_FAN_RD_ACPI_FANS ? */ + + switch (fan_status_access_mode) { + case TPACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + + if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) + return -EIO; + + if (likely(status)) + *status = s & 0x07; + + break; + + case TPACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!acpi_ec_read(fan_status_offset, &s))) + return -EIO; + + if (likely(status)) + *status = s; + + break; + + default: + return -ENXIO; + } + + return 0; +} + +static int fan_get_status_safe(u8 *status) +{ + int rc; + u8 s; + + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; + rc = fan_get_status(&s); + if (!rc) + fan_update_desired_level(s); + mutex_unlock(&fan_mutex); + + if (status) + *status = s; + + return rc; +} + +static int fan_get_speed(unsigned int *speed) +{ + u8 hi, lo; + + switch (fan_status_access_mode) { + case TPACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || + !acpi_ec_read(fan_rpm_offset + 1, &hi))) + return -EIO; + + if (likely(speed)) + *speed = (hi << 8) | lo; + + break; + + default: + return -ENXIO; + } + + return 0; +} + +static int fan_set_level(int level) +{ + if (!fan_control_allowed) + return -EPERM; + + switch (fan_control_access_mode) { + case TPACPI_FAN_WR_ACPI_SFAN: + if (level >= 0 && level <= 7) { + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) + return -EIO; + } else + return -EINVAL; + break; + + case TPACPI_FAN_WR_ACPI_FANS: + case TPACPI_FAN_WR_TPEC: + if ((level != TP_EC_FAN_AUTO) && + (level != TP_EC_FAN_FULLSPEED) && + ((level < 0) || (level > 7))) + return -EINVAL; + + /* safety net should the EC not support AUTO + * or FULLSPEED mode bits and just ignore them */ + if (level & TP_EC_FAN_FULLSPEED) + level |= 7; /* safety min speed 7 */ + else if (level & TP_EC_FAN_FULLSPEED) + level |= 4; /* safety min speed 4 */ + + if (!acpi_ec_write(fan_status_offset, level)) + return -EIO; + else + tp_features.fan_ctrl_status_undef = 0; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_level_safe(int level) +{ + int rc; + + if (!fan_control_allowed) + return -EPERM; + + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; + + if (level == TPACPI_FAN_LAST_LEVEL) + level = fan_control_desired_level; + + rc = fan_set_level(level); + if (!rc) + fan_update_desired_level(level); + + mutex_unlock(&fan_mutex); + return rc; +} + +static int fan_set_enable(void) +{ + u8 s; + int rc; + + if (!fan_control_allowed) + return -EPERM; + + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; + + switch (fan_control_access_mode) { + case TPACPI_FAN_WR_ACPI_FANS: + case TPACPI_FAN_WR_TPEC: + rc = fan_get_status(&s); + if (rc < 0) + break; + + /* Don't go out of emergency fan mode */ + if (s != 7) { + s &= 0x07; + s |= TP_EC_FAN_AUTO | 4; /* min fan speed 4 */ + } + + if (!acpi_ec_write(fan_status_offset, s)) + rc = -EIO; + else { + tp_features.fan_ctrl_status_undef = 0; + rc = 0; + } + break; + + case TPACPI_FAN_WR_ACPI_SFAN: + rc = fan_get_status(&s); + if (rc < 0) + break; + + s &= 0x07; + + /* Set fan to at least level 4 */ + s |= 4; + + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) + rc= -EIO; + else + rc = 0; + break; + + default: + rc = -ENXIO; + } + + mutex_unlock(&fan_mutex); + return rc; +} + +static int fan_set_disable(void) +{ + int rc; + + if (!fan_control_allowed) + return -EPERM; + + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; + + rc = 0; + switch (fan_control_access_mode) { + case TPACPI_FAN_WR_ACPI_FANS: + case TPACPI_FAN_WR_TPEC: + if (!acpi_ec_write(fan_status_offset, 0x00)) + rc = -EIO; + else { + fan_control_desired_level = 0; + tp_features.fan_ctrl_status_undef = 0; + } + break; + + case TPACPI_FAN_WR_ACPI_SFAN: + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00)) + rc = -EIO; + else + fan_control_desired_level = 0; + break; + + default: + rc = -ENXIO; + } + + + mutex_unlock(&fan_mutex); + return rc; +} + +static int fan_set_speed(int speed) +{ + int rc; + + if (!fan_control_allowed) + return -EPERM; + + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; + + rc = 0; + switch (fan_control_access_mode) { + case TPACPI_FAN_WR_ACPI_FANS: + if (speed >= 0 && speed <= 65535) { + if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", + speed, speed, speed)) + rc = -EIO; + } else + rc = -EINVAL; + break; + + default: + rc = -ENXIO; + } + + mutex_unlock(&fan_mutex); + return rc; +} + +static void fan_watchdog_reset(void) +{ + static int fan_watchdog_active; + + if (fan_control_access_mode == TPACPI_FAN_WR_NONE) + return; + + if (fan_watchdog_active) + cancel_delayed_work(&fan_watchdog_task); + + if (fan_watchdog_maxinterval > 0 && + tpacpi_lifecycle != TPACPI_LIFE_EXITING) { + fan_watchdog_active = 1; + if (!schedule_delayed_work(&fan_watchdog_task, + msecs_to_jiffies(fan_watchdog_maxinterval + * 1000))) { + printk(IBM_ERR "failed to schedule the fan watchdog, " + "watchdog will not trigger\n"); + } + } else + fan_watchdog_active = 0; +} + +static void fan_watchdog_fire(struct work_struct *ignored) +{ + int rc; + + if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING) + return; + + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + rc = fan_set_enable(); + if (rc < 0) { + printk(IBM_ERR "fan watchdog: error %d while enabling fan, " + "will try again later...\n", -rc); + /* reschedule for later */ + fan_watchdog_reset(); + } +} + /* * SYSFS fan layout: hwmon compatible (device) * @@ -4936,74 +5228,6 @@ static int __init fan_init(struct ibm_init_struct *iibm) return 1; } -/* - * Call with fan_mutex held - */ -static void fan_update_desired_level(u8 status) -{ - if ((status & - (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) == 0) { - if (status > 7) - fan_control_desired_level = 7; - else - fan_control_desired_level = status; - } -} - -static int fan_get_status(u8 *status) -{ - u8 s; - - /* TODO: - * Add TPACPI_FAN_RD_ACPI_FANS ? */ - - switch (fan_status_access_mode) { - case TPACPI_FAN_RD_ACPI_GFAN: - /* 570, 600e/x, 770e, 770x */ - - if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) - return -EIO; - - if (likely(status)) - *status = s & 0x07; - - break; - - case TPACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if (unlikely(!acpi_ec_read(fan_status_offset, &s))) - return -EIO; - - if (likely(status)) - *status = s; - - break; - - default: - return -ENXIO; - } - - return 0; -} - -static int fan_get_status_safe(u8 *status) -{ - int rc; - u8 s; - - if (mutex_lock_interruptible(&fan_mutex)) - return -ERESTARTSYS; - rc = fan_get_status(&s); - if (!rc) - fan_update_desired_level(s); - mutex_unlock(&fan_mutex); - - if (status) - *status = s; - - return rc; -} - static void fan_exit(void) { vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n"); @@ -5016,253 +5240,6 @@ static void fan_exit(void) flush_scheduled_work(); } -static int fan_get_speed(unsigned int *speed) -{ - u8 hi, lo; - - switch (fan_status_access_mode) { - case TPACPI_FAN_RD_TPEC: - /* all except 570, 600e/x, 770e, 770x */ - if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || - !acpi_ec_read(fan_rpm_offset + 1, &hi))) - return -EIO; - - if (likely(speed)) - *speed = (hi << 8) | lo; - - break; - - default: - return -ENXIO; - } - - return 0; -} - -static void fan_watchdog_fire(struct work_struct *ignored) -{ - int rc; - - if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING) - return; - - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); - rc = fan_set_enable(); - if (rc < 0) { - printk(IBM_ERR "fan watchdog: error %d while enabling fan, " - "will try again later...\n", -rc); - /* reschedule for later */ - fan_watchdog_reset(); - } -} - -static void fan_watchdog_reset(void) -{ - static int fan_watchdog_active; - - if (fan_control_access_mode == TPACPI_FAN_WR_NONE) - return; - - if (fan_watchdog_active) - cancel_delayed_work(&fan_watchdog_task); - - if (fan_watchdog_maxinterval > 0 && - tpacpi_lifecycle != TPACPI_LIFE_EXITING) { - fan_watchdog_active = 1; - if (!schedule_delayed_work(&fan_watchdog_task, - msecs_to_jiffies(fan_watchdog_maxinterval - * 1000))) { - printk(IBM_ERR "failed to schedule the fan watchdog, " - "watchdog will not trigger\n"); - } - } else - fan_watchdog_active = 0; -} - -static int fan_set_level(int level) -{ - if (!fan_control_allowed) - return -EPERM; - - switch (fan_control_access_mode) { - case TPACPI_FAN_WR_ACPI_SFAN: - if (level >= 0 && level <= 7) { - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) - return -EIO; - } else - return -EINVAL; - break; - - case TPACPI_FAN_WR_ACPI_FANS: - case TPACPI_FAN_WR_TPEC: - if ((level != TP_EC_FAN_AUTO) && - (level != TP_EC_FAN_FULLSPEED) && - ((level < 0) || (level > 7))) - return -EINVAL; - - /* safety net should the EC not support AUTO - * or FULLSPEED mode bits and just ignore them */ - if (level & TP_EC_FAN_FULLSPEED) - level |= 7; /* safety min speed 7 */ - else if (level & TP_EC_FAN_FULLSPEED) - level |= 4; /* safety min speed 4 */ - - if (!acpi_ec_write(fan_status_offset, level)) - return -EIO; - else - tp_features.fan_ctrl_status_undef = 0; - break; - - default: - return -ENXIO; - } - return 0; -} - -static int fan_set_level_safe(int level) -{ - int rc; - - if (!fan_control_allowed) - return -EPERM; - - if (mutex_lock_interruptible(&fan_mutex)) - return -ERESTARTSYS; - - if (level == TPACPI_FAN_LAST_LEVEL) - level = fan_control_desired_level; - - rc = fan_set_level(level); - if (!rc) - fan_update_desired_level(level); - - mutex_unlock(&fan_mutex); - return rc; -} - -static int fan_set_enable(void) -{ - u8 s; - int rc; - - if (!fan_control_allowed) - return -EPERM; - - if (mutex_lock_interruptible(&fan_mutex)) - return -ERESTARTSYS; - - switch (fan_control_access_mode) { - case TPACPI_FAN_WR_ACPI_FANS: - case TPACPI_FAN_WR_TPEC: - rc = fan_get_status(&s); - if (rc < 0) - break; - - /* Don't go out of emergency fan mode */ - if (s != 7) { - s &= 0x07; - s |= TP_EC_FAN_AUTO | 4; /* min fan speed 4 */ - } - - if (!acpi_ec_write(fan_status_offset, s)) - rc = -EIO; - else { - tp_features.fan_ctrl_status_undef = 0; - rc = 0; - } - break; - - case TPACPI_FAN_WR_ACPI_SFAN: - rc = fan_get_status(&s); - if (rc < 0) - break; - - s &= 0x07; - - /* Set fan to at least level 4 */ - s |= 4; - - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) - rc= -EIO; - else - rc = 0; - break; - - default: - rc = -ENXIO; - } - - mutex_unlock(&fan_mutex); - return rc; -} - -static int fan_set_disable(void) -{ - int rc; - - if (!fan_control_allowed) - return -EPERM; - - if (mutex_lock_interruptible(&fan_mutex)) - return -ERESTARTSYS; - - rc = 0; - switch (fan_control_access_mode) { - case TPACPI_FAN_WR_ACPI_FANS: - case TPACPI_FAN_WR_TPEC: - if (!acpi_ec_write(fan_status_offset, 0x00)) - rc = -EIO; - else { - fan_control_desired_level = 0; - tp_features.fan_ctrl_status_undef = 0; - } - break; - - case TPACPI_FAN_WR_ACPI_SFAN: - if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00)) - rc = -EIO; - else - fan_control_desired_level = 0; - break; - - default: - rc = -ENXIO; - } - - - mutex_unlock(&fan_mutex); - return rc; -} - -static int fan_set_speed(int speed) -{ - int rc; - - if (!fan_control_allowed) - return -EPERM; - - if (mutex_lock_interruptible(&fan_mutex)) - return -ERESTARTSYS; - - rc = 0; - switch (fan_control_access_mode) { - case TPACPI_FAN_WR_ACPI_FANS: - if (speed >= 0 && speed <= 65535) { - if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", - speed, speed, speed)) - rc = -EIO; - } else - rc = -EINVAL; - break; - - default: - rc = -ENXIO; - } - - mutex_unlock(&fan_mutex); - return rc; -} - static int fan_read(char *p) { int len = 0; @@ -5473,11 +5450,12 @@ static struct device_attribute dev_attr_thinkpad_acpi_pdev_name = /* /proc support */ static struct proc_dir_entry *proc_dir; - /* * Module and infrastructure proble, init and exit handling */ +static int force_load; + #ifdef CONFIG_THINKPAD_ACPI_DEBUG static const char * __init str_supported(int is_supported) { @@ -5487,7 +5465,47 @@ static const char * __init str_supported(int is_supported) } #endif /* CONFIG_THINKPAD_ACPI_DEBUG */ -static void ibm_exit(struct ibm_struct *ibm); +static void ibm_exit(struct ibm_struct *ibm) +{ + dbg_printk(TPACPI_DBG_EXIT, "removing %s\n", ibm->name); + + list_del_init(&ibm->all_drivers); + + if (ibm->flags.acpi_notify_installed) { + dbg_printk(TPACPI_DBG_EXIT, + "%s: acpi_remove_notify_handler\n", ibm->name); + BUG_ON(!ibm->acpi); + acpi_remove_notify_handler(*ibm->acpi->handle, + ibm->acpi->type, + dispatch_acpi_notify); + ibm->flags.acpi_notify_installed = 0; + ibm->flags.acpi_notify_installed = 0; + } + + if (ibm->flags.proc_created) { + dbg_printk(TPACPI_DBG_EXIT, + "%s: remove_proc_entry\n", ibm->name); + remove_proc_entry(ibm->name, proc_dir); + ibm->flags.proc_created = 0; + } + + if (ibm->flags.acpi_driver_registered) { + dbg_printk(TPACPI_DBG_EXIT, + "%s: acpi_bus_unregister_driver\n", ibm->name); + BUG_ON(!ibm->acpi); + acpi_bus_unregister_driver(ibm->acpi->driver); + kfree(ibm->acpi->driver); + ibm->acpi->driver = NULL; + ibm->flags.acpi_driver_registered = 0; + } + + if (ibm->flags.init_called && ibm->exit) { + ibm->exit(); + ibm->flags.init_called = 0; + } + + dbg_printk(TPACPI_DBG_INIT, "finished removing %s\n", ibm->name); +} static int __init ibm_init(struct ibm_init_struct *iibm) { @@ -5569,48 +5587,6 @@ err_out: return (ret < 0)? ret : 0; } -static void ibm_exit(struct ibm_struct *ibm) -{ - dbg_printk(TPACPI_DBG_EXIT, "removing %s\n", ibm->name); - - list_del_init(&ibm->all_drivers); - - if (ibm->flags.acpi_notify_installed) { - dbg_printk(TPACPI_DBG_EXIT, - "%s: acpi_remove_notify_handler\n", ibm->name); - BUG_ON(!ibm->acpi); - acpi_remove_notify_handler(*ibm->acpi->handle, - ibm->acpi->type, - dispatch_acpi_notify); - ibm->flags.acpi_notify_installed = 0; - ibm->flags.acpi_notify_installed = 0; - } - - if (ibm->flags.proc_created) { - dbg_printk(TPACPI_DBG_EXIT, - "%s: remove_proc_entry\n", ibm->name); - remove_proc_entry(ibm->name, proc_dir); - ibm->flags.proc_created = 0; - } - - if (ibm->flags.acpi_driver_registered) { - dbg_printk(TPACPI_DBG_EXIT, - "%s: acpi_bus_unregister_driver\n", ibm->name); - BUG_ON(!ibm->acpi); - acpi_bus_unregister_driver(ibm->acpi->driver); - kfree(ibm->acpi->driver); - ibm->acpi->driver = NULL; - ibm->flags.acpi_driver_registered = 0; - } - - if (ibm->flags.init_called && ibm->exit) { - ibm->exit(); - ibm->flags.init_called = 0; - } - - dbg_printk(TPACPI_DBG_INIT, "finished removing %s\n", ibm->name); -} - /* Probing */ static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp) @@ -5839,7 +5815,57 @@ IBM_PARAM(brightness); IBM_PARAM(volume); IBM_PARAM(fan); -static void thinkpad_acpi_module_exit(void); +static void thinkpad_acpi_module_exit(void) +{ + struct ibm_struct *ibm, *itmp; + + tpacpi_lifecycle = TPACPI_LIFE_EXITING; + + list_for_each_entry_safe_reverse(ibm, itmp, + &tpacpi_all_drivers, + all_drivers) { + ibm_exit(ibm); + } + + dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n"); + + if (tpacpi_inputdev) { + if (tp_features.input_device_registered) + input_unregister_device(tpacpi_inputdev); + else + input_free_device(tpacpi_inputdev); + } + + if (tpacpi_hwmon) + hwmon_device_unregister(tpacpi_hwmon); + + if (tp_features.sensors_pdev_attrs_registered) + device_remove_file(&tpacpi_sensors_pdev->dev, + &dev_attr_thinkpad_acpi_pdev_name); + if (tpacpi_sensors_pdev) + platform_device_unregister(tpacpi_sensors_pdev); + if (tpacpi_pdev) + platform_device_unregister(tpacpi_pdev); + + if (tp_features.sensors_pdrv_attrs_registered) + tpacpi_remove_driver_attributes(&tpacpi_hwmon_pdriver.driver); + if (tp_features.platform_drv_attrs_registered) + tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver); + + if (tp_features.sensors_pdrv_registered) + platform_driver_unregister(&tpacpi_hwmon_pdriver); + + if (tp_features.platform_drv_registered) + platform_driver_unregister(&tpacpi_pdriver); + + if (proc_dir) + remove_proc_entry(IBM_PROC_DIR, acpi_root_dir); + + kfree(thinkpad_id.bios_version_str); + kfree(thinkpad_id.ec_version_str); + kfree(thinkpad_id.model_str); +} + static int __init thinkpad_acpi_module_init(void) { @@ -5978,56 +6004,5 @@ static int __init thinkpad_acpi_module_init(void) return 0; } -static void thinkpad_acpi_module_exit(void) -{ - struct ibm_struct *ibm, *itmp; - - tpacpi_lifecycle = TPACPI_LIFE_EXITING; - - list_for_each_entry_safe_reverse(ibm, itmp, - &tpacpi_all_drivers, - all_drivers) { - ibm_exit(ibm); - } - - dbg_printk(TPACPI_DBG_INIT, "finished subdriver exit path...\n"); - - if (tpacpi_inputdev) { - if (tp_features.input_device_registered) - input_unregister_device(tpacpi_inputdev); - else - input_free_device(tpacpi_inputdev); - } - - if (tpacpi_hwmon) - hwmon_device_unregister(tpacpi_hwmon); - - if (tp_features.sensors_pdev_attrs_registered) - device_remove_file(&tpacpi_sensors_pdev->dev, - &dev_attr_thinkpad_acpi_pdev_name); - if (tpacpi_sensors_pdev) - platform_device_unregister(tpacpi_sensors_pdev); - if (tpacpi_pdev) - platform_device_unregister(tpacpi_pdev); - - if (tp_features.sensors_pdrv_attrs_registered) - tpacpi_remove_driver_attributes(&tpacpi_hwmon_pdriver.driver); - if (tp_features.platform_drv_attrs_registered) - tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver); - - if (tp_features.sensors_pdrv_registered) - platform_driver_unregister(&tpacpi_hwmon_pdriver); - - if (tp_features.platform_drv_registered) - platform_driver_unregister(&tpacpi_pdriver); - - if (proc_dir) - remove_proc_entry(IBM_PROC_DIR, acpi_root_dir); - - kfree(thinkpad_id.bios_version_str); - kfree(thinkpad_id.ec_version_str); - kfree(thinkpad_id.model_str); -} - module_init(thinkpad_acpi_module_init); module_exit(thinkpad_acpi_module_exit); From 4b45cc076bc1964352f4a603a18c511ac182b98f Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:46 -0200 Subject: [PATCH 040/112] ACPI: thinkpad-acpi: spring cleanup part 4 Remove dead code, and anything in the old changelog that is not a thank you credit, or a key point to track down history. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 55 +++--------------------------------- 1 file changed, 4 insertions(+), 51 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index b6293a40132e..45be8e5f9351 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -26,6 +26,8 @@ /* * Changelog: + * 2007-10-20 changelog trimmed down + * * 2007-03-27 0.14 renamed to thinkpad_acpi and moved to * drivers/misc. * @@ -33,53 +35,16 @@ * changelog now lives in git commit history, and will * not be updated further in-file. * - * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels * 2005-03-17 0.11 support for 600e, 770x * thanks to Jamie Lentin - * support for 770e, G41 - * G40 and G41 don't have a thinklight - * temperatures no longer experimental - * experimental brightness control - * experimental volume control - * experimental fan enable/disable - * 2005-01-16 0.10 fix module loading on R30, R31 - * 2005-01-16 0.9 support for 570, R30, R31 - * ultrabay support on A22p, A3x - * limit arg for cmos, led, beep, drop experimental status - * more capable led control on A21e, A22p, T20-22, X20 - * experimental temperatures and fan speed - * experimental embedded controller register dump - * mark more functions as __init, drop incorrect __exit - * use MODULE_VERSION + * + * 2005-01-16 0.9 use MODULE_VERSION * thanks to Henrik Brix Andersen * fix parameter passing on module loading * thanks to Rusty Russell * thanks to Jim Radford * 2004-11-08 0.8 fix init error case, don't return from a macro * thanks to Chris Wright - * 2004-10-23 0.7 fix module loading on A21e, A22p, T20, T21, X20 - * fix led control on A21e - * 2004-10-19 0.6 use acpi_bus_register_driver() to claim HKEY device - * 2004-10-18 0.5 thinklight support on A21e, G40, R32, T20, T21, X20 - * proc file format changed - * video_switch command - * experimental cmos control - * experimental led control - * experimental acpi sounds - * 2004-09-16 0.4 support for module parameters - * hotkey mask can be prefixed by 0x - * video output switching - * video expansion control - * ultrabay eject support - * removed lcd brightness/on/off control, didn't work - * 2004-08-17 0.3 support for R40 - * lcd off, brightness control - * thinklight on/off - * 2004-08-14 0.2 support for T series, X20 - * bluetooth enable/disable - * hotkey events disabled by default - * removed fan control, currently useless - * 2004-08-09 0.1 initial release, support for X series */ #include @@ -314,8 +279,6 @@ struct thinkpad_id_data { }; static struct thinkpad_id_data thinkpad_id; -#define __unused __attribute__ ((unused)) - static enum { TPACPI_LIFE_INIT = 0, TPACPI_LIFE_RUNNING, @@ -451,16 +414,6 @@ static int acpi_evalf(acpi_handle handle, return success; } -static void __unused acpi_print_int(acpi_handle handle, char *method) -{ - int i; - - if (acpi_evalf(handle, &i, method, "d")) - printk(IBM_INFO "%s = 0x%x\n", method, i); - else - printk(IBM_ERR "error calling %s\n", method); -} - static int acpi_ec_read(int i, u8 * p) { int v; From f68080f86d8b43bf3ff4c309f1bc9aa4d3fdf735 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:47 -0200 Subject: [PATCH 041/112] ACPI: thinkpad-acpi: module glue cleanups General cleanup of module glue: Do some code reordering, and add missing parameter help text. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 83 ++++++++++++++++++++++-------------- 1 file changed, 50 insertions(+), 33 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 45be8e5f9351..be04f1c94d61 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -124,7 +124,6 @@ enum { * Main driver */ -/* Module */ #define IBM_NAME "thinkpad" #define IBM_DESC "ThinkPad ACPI Extras" #define IBM_FILE IBM_NAME "_acpi" @@ -138,37 +137,6 @@ enum { #define IBM_MAX_ACPI_ARGS 3 -MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); -MODULE_DESCRIPTION(IBM_DESC); -MODULE_VERSION(IBM_VERSION); -MODULE_LICENSE("GPL"); - -/* Please remove this in year 2009 */ -MODULE_ALIAS("ibm_acpi"); - -/* - * DMI matching for module autoloading - * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads - * - * Only models listed in thinkwiki will be supported, so add yours - * if it is not there yet. - */ -#define IBM_BIOS_MODULE_ALIAS(__type) \ - MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") - -/* Non-ancient thinkpads */ -MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); -MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); - -/* Ancient thinkpad BIOSes have to be identified by - * BIOS type or model number, and there are far less - * BIOS types than model numbers... */ -IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]"); -IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); -IBM_BIOS_MODULE_ALIAS("K[U,X-Z]"); - /* Debugging */ #define IBM_LOG IBM_FILE ": " #define IBM_ERR KERN_ERR IBM_LOG @@ -5734,21 +5702,39 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) } module_param(experimental, int, 0); +MODULE_PARM_DESC(experimental, + "Enables experimental features when non-zero"); module_param_named(debug, dbg_level, uint, 0); +MODULE_PARM_DESC(debug, "Sets debug level bit-mask"); module_param(force_load, bool, 0); +MODULE_PARM_DESC(force_load, + "Attempts to load the driver even on a " + "mis-identified ThinkPad when true"); module_param_named(fan_control, fan_control_allowed, bool, 0); +MODULE_PARM_DESC(fan_control, + "Enables setting fan parameters features when true"); module_param_named(brightness_mode, brightness_mode, int, 0); +MODULE_PARM_DESC(brightness_mode, + "Selects brightness control strategy: " + "0=auto, 1=EC, 2=CMOS, 3=both"); module_param(brightness_enable, uint, 0); +MODULE_PARM_DESC(brightness_enable, + "Enables backlight control when 1, disables when 0"); module_param(hotkey_report_mode, uint, 0); +MODULE_PARM_DESC(hotkey_report_mode, + "used for backwards compatibility with userspace, " + "see documentation"); #define IBM_PARAM(feature) \ - module_param_call(feature, set_ibm_param, NULL, NULL, 0) + module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ + MODULE_PARM_DESC(feature, "Simulates thinkpad-aci procfs command " \ + "at module load, see documentation") IBM_PARAM(hotkey); IBM_PARAM(bluetooth); @@ -5957,5 +5943,36 @@ static int __init thinkpad_acpi_module_init(void) return 0; } +/* Please remove this in year 2009 */ +MODULE_ALIAS("ibm_acpi"); + +/* + * DMI matching for module autoloading + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads + * + * Only models listed in thinkwiki will be supported, so add yours + * if it is not there yet. + */ +#define IBM_BIOS_MODULE_ALIAS(__type) \ + MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") + +/* Non-ancient thinkpads */ +MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); +MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); + +/* Ancient thinkpad BIOSes have to be identified by + * BIOS type or model number, and there are far less + * BIOS types than model numbers... */ +IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]"); +IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); +IBM_BIOS_MODULE_ALIAS("K[U,X-Z]"); + +MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); +MODULE_DESCRIPTION(IBM_DESC); +MODULE_VERSION(IBM_VERSION); +MODULE_LICENSE("GPL"); + module_init(thinkpad_acpi_module_init); module_exit(thinkpad_acpi_module_exit); From e0c7dfe70170ccee2b538494f92e61de8edab990 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:48 -0200 Subject: [PATCH 042/112] ACPI: thinkpad-acpi: rename IBM in defines Rename defines with IBM in their name that are related to the older driver name (ibm-acpi) to TPACPI, unless they are specific to IBM ThinkPads. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 324 +++++++++++++++++------------------ 1 file changed, 162 insertions(+), 162 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index be04f1c94d61..c92ae8d92b28 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.18" +#define TPACPI_VERSION "0.18" #define TPACPI_SYSFS_VERSION 0x020101 /* @@ -113,7 +113,7 @@ enum { }; /* ACPI HIDs */ -#define IBM_HKEY_HID "IBM0068" +#define TPACPI_ACPI_HKEY_HID "IBM0068" /* Input IDs */ #define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */ @@ -124,25 +124,25 @@ enum { * Main driver */ -#define IBM_NAME "thinkpad" -#define IBM_DESC "ThinkPad ACPI Extras" -#define IBM_FILE IBM_NAME "_acpi" -#define IBM_URL "http://ibm-acpi.sf.net/" -#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net" +#define TPACPI_NAME "thinkpad" +#define TPACPI_DESC "ThinkPad ACPI Extras" +#define TPACPI_FILE TPACPI_NAME "_acpi" +#define TPACPI_URL "http://ibm-acpi.sf.net/" +#define TPACPI_MAIL "ibm-acpi-devel@lists.sourceforge.net" -#define IBM_PROC_DIR "ibm" -#define IBM_ACPI_EVENT_PREFIX "ibm" -#define IBM_DRVR_NAME IBM_FILE -#define IBM_HWMON_DRVR_NAME IBM_NAME "_hwmon" +#define TPACPI_PROC_DIR "ibm" +#define TPACPI_ACPI_EVENT_PREFIX "ibm" +#define TPACPI_DRVR_NAME TPACPI_FILE +#define TPACPI_HWMON_DRVR_NAME TPACPI_NAME "_hwmon" -#define IBM_MAX_ACPI_ARGS 3 +#define TPACPI_MAX_ACPI_ARGS 3 /* Debugging */ -#define IBM_LOG IBM_FILE ": " -#define IBM_ERR KERN_ERR IBM_LOG -#define IBM_NOTICE KERN_NOTICE IBM_LOG -#define IBM_INFO KERN_INFO IBM_LOG -#define IBM_DEBUG KERN_DEBUG IBM_LOG +#define TPACPI_LOG TPACPI_FILE ": " +#define TPACPI_ERR KERN_ERR TPACPI_LOG +#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG +#define TPACPI_INFO KERN_INFO TPACPI_LOG +#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG #define TPACPI_DBG_ALL 0xffff #define TPACPI_DBG_ALL 0xffff @@ -150,7 +150,7 @@ enum { #define TPACPI_DBG_EXIT 0x0002 #define dbg_printk(a_dbg_level, format, arg...) \ do { if (dbg_level & a_dbg_level) \ - printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0) + printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); } while (0) #ifdef CONFIG_THINKPAD_ACPI_DEBUG #define vdbg_printk(a_dbg_level, format, arg...) \ dbg_printk(a_dbg_level, format, ## arg) @@ -270,13 +270,13 @@ static u32 dbg_level; static acpi_handle root_handle; -#define IBM_HANDLE(object, parent, paths...) \ +#define TPACPI_HANDLE(object, parent, paths...) \ static acpi_handle object##_handle; \ static acpi_handle *object##_parent = &parent##_handle; \ static char *object##_path; \ static char *object##_paths[] = { paths } -IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ +TPACPI_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI.ISA.EC", /* 570 */ "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */ "\\_SB.PCI0.ISA.EC", /* A21e, A2xm/p, T20-22, X20-21 */ @@ -285,15 +285,15 @@ IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI0.LPC.EC", /* all others */ ); -IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ -IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ +TPACPI_HANDLE(ecrd, ec, "ECRD"); /* 570 */ +TPACPI_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ +TPACPI_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ ); /* all others */ -IBM_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ +TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "^HKEY", /* R30, R31 */ "HKEY", /* all others */ ); /* 570 */ @@ -308,7 +308,7 @@ static int acpi_evalf(acpi_handle handle, { char *fmt0 = fmt; struct acpi_object_list params; - union acpi_object in_objs[IBM_MAX_ACPI_ARGS]; + union acpi_object in_objs[TPACPI_MAX_ACPI_ARGS]; struct acpi_buffer result, *resultp; union acpi_object out_obj; acpi_status status; @@ -318,7 +318,7 @@ static int acpi_evalf(acpi_handle handle, int quiet; if (!*fmt) { - printk(IBM_ERR "acpi_evalf() called with empty format\n"); + printk(TPACPI_ERR "acpi_evalf() called with empty format\n"); return 0; } @@ -343,7 +343,7 @@ static int acpi_evalf(acpi_handle handle, break; /* add more types as needed */ default: - printk(IBM_ERR "acpi_evalf() called " + printk(TPACPI_ERR "acpi_evalf() called " "with invalid format character '%c'\n", c); return 0; } @@ -370,13 +370,13 @@ static int acpi_evalf(acpi_handle handle, break; /* add more types as needed */ default: - printk(IBM_ERR "acpi_evalf() called " + printk(TPACPI_ERR "acpi_evalf() called " "with invalid format character '%c'\n", res_type); return 0; } if (!success && !quiet) - printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n", + printk(TPACPI_ERR "acpi_evalf(%s, %s, ...) failed: %d\n", method, fmt0, status); return success; @@ -436,7 +436,7 @@ static int issue_thinkpad_cmos_command(int cmos_cmd) * ACPI device model */ -#define IBM_ACPIHANDLE_INIT(object) \ +#define TPACPI_ACPIHANDLE_INIT(object) \ drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ object##_paths, ARRAY_SIZE(object##_paths), &object##_path) @@ -494,24 +494,24 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm) rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device); if (rc < 0) { - printk(IBM_ERR "acpi_bus_get_device(%s) failed: %d\n", + printk(TPACPI_ERR "acpi_bus_get_device(%s) failed: %d\n", ibm->name, rc); return -ENODEV; } acpi_driver_data(ibm->acpi->device) = ibm; sprintf(acpi_device_class(ibm->acpi->device), "%s/%s", - IBM_ACPI_EVENT_PREFIX, + TPACPI_ACPI_EVENT_PREFIX, ibm->name); status = acpi_install_notify_handler(*ibm->acpi->handle, ibm->acpi->type, dispatch_acpi_notify, ibm); if (ACPI_FAILURE(status)) { if (status == AE_ALREADY_EXISTS) { - printk(IBM_NOTICE "another device driver is already handling %s events\n", + printk(TPACPI_NOTICE "another device driver is already handling %s events\n", ibm->name); } else { - printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n", + printk(TPACPI_ERR "acpi_install_notify_handler(%s) failed: %d\n", ibm->name, status); } return -ENODEV; @@ -536,18 +536,18 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm) ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); if (!ibm->acpi->driver) { - printk(IBM_ERR "kzalloc(ibm->driver) failed\n"); + printk(TPACPI_ERR "kzalloc(ibm->driver) failed\n"); return -ENOMEM; } - sprintf(ibm->acpi->driver->name, "%s_%s", IBM_NAME, ibm->name); + sprintf(ibm->acpi->driver->name, "%s_%s", TPACPI_NAME, ibm->name); ibm->acpi->driver->ids = ibm->acpi->hid; ibm->acpi->driver->ops.add = &tpacpi_device_add; rc = acpi_bus_register_driver(ibm->acpi->driver); if (rc < 0) { - printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n", + printk(TPACPI_ERR "acpi_bus_register_driver(%s) failed: %d\n", ibm->name, rc); kfree(ibm->acpi->driver); ibm->acpi->driver = NULL; @@ -670,7 +670,7 @@ static int tpacpi_resume_handler(struct platform_device *pdev) static struct platform_driver tpacpi_pdriver = { .driver = { - .name = IBM_DRVR_NAME, + .name = TPACPI_DRVR_NAME, .owner = THIS_MODULE, }, .resume = tpacpi_resume_handler, @@ -678,7 +678,7 @@ static struct platform_driver tpacpi_pdriver = { static struct platform_driver tpacpi_hwmon_pdriver = { .driver = { - .name = IBM_HWMON_DRVR_NAME, + .name = TPACPI_HWMON_DRVR_NAME, .owner = THIS_MODULE, }, }; @@ -818,7 +818,7 @@ static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, static ssize_t tpacpi_driver_version_show(struct device_driver *drv, char *buf) { - return snprintf(buf, PAGE_SIZE, "%s v%s\n", IBM_DESC, IBM_VERSION); + return snprintf(buf, PAGE_SIZE, "%s v%s\n", TPACPI_DESC, TPACPI_VERSION); } static DRIVER_ATTR(version, S_IRUGO, @@ -867,17 +867,17 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm) { - printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION); - printk(IBM_INFO "%s\n", IBM_URL); + printk(TPACPI_INFO "%s v%s\n", TPACPI_DESC, TPACPI_VERSION); + printk(TPACPI_INFO "%s\n", TPACPI_URL); - printk(IBM_INFO "ThinkPad BIOS %s, EC %s\n", + printk(TPACPI_INFO "ThinkPad BIOS %s, EC %s\n", (thinkpad_id.bios_version_str) ? thinkpad_id.bios_version_str : "unknown", (thinkpad_id.ec_version_str) ? thinkpad_id.ec_version_str : "unknown"); if (thinkpad_id.vendor && thinkpad_id.model_str) - printk(IBM_INFO "%s %s\n", + printk(TPACPI_INFO "%s %s\n", (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ? "IBM" : ((thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) ? @@ -891,8 +891,8 @@ static int thinkpad_acpi_driver_read(char *p) { int len = 0; - len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC); - len += sprintf(p + len, "version:\t%s\n", IBM_VERSION); + len += sprintf(p + len, "driver:\t\t%s\n", TPACPI_DESC); + len += sprintf(p + len, "version:\t%s\n", TPACPI_VERSION); return len; } @@ -1073,7 +1073,7 @@ static int hotkey_mask_set(u32 mask) if (!hotkey_mask_get() && !rc && (hotkey_mask & ~hotkey_source_mask) != (mask & ~hotkey_source_mask)) { - printk(IBM_NOTICE + printk(TPACPI_NOTICE "requested hot key mask 0x%08x, but " "firmware forced it to 0x%08x\n", mask, hotkey_mask); @@ -1085,7 +1085,7 @@ static int hotkey_mask_set(u32 mask) HOTKEY_CONFIG_CRITICAL_END hotkey_mask_get(); if (hotkey_mask != mask) { - printk(IBM_NOTICE + printk(TPACPI_NOTICE "requested hot key mask 0x%08x, " "forced to 0x%08x (NVRAM poll mask is " "0x%08x): no firmware mask support\n", @@ -1352,10 +1352,10 @@ static void hotkey_poll_setup(int may_warn) (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) { if (!tpacpi_hotkey_task) { tpacpi_hotkey_task = kthread_run(hotkey_kthread, - NULL, IBM_FILE "d"); + NULL, TPACPI_FILE "d"); if (IS_ERR(tpacpi_hotkey_task)) { tpacpi_hotkey_task = NULL; - printk(IBM_ERR "could not create kernel thread " + printk(TPACPI_ERR "could not create kernel thread " "for hotkey polling\n"); } } @@ -1363,7 +1363,7 @@ static void hotkey_poll_setup(int may_warn) hotkey_poll_stop_sync(); if (may_warn && hotkey_source_mask != 0 && hotkey_poll_freq == 0) { - printk(IBM_NOTICE "hot keys 0x%08x require polling, " + printk(TPACPI_NOTICE "hot keys 0x%08x require polling, " "which is currently disabled\n", hotkey_source_mask); } @@ -1777,7 +1777,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) BUG_ON(tpacpi_inputdev->open != NULL || tpacpi_inputdev->close != NULL); - IBM_ACPIHANDLE_INIT(hkey); + TPACPI_ACPIHANDLE_INIT(hkey); mutex_init(&hotkey_mutex); #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL @@ -1806,10 +1806,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) for HKEY interface version 0x100 */ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { if ((hkeyv >> 8) != 1) { - printk(IBM_ERR "unknown version of the " + printk(TPACPI_ERR "unknown version of the " "HKEY interface: 0x%x\n", hkeyv); - printk(IBM_ERR "please report this to %s\n", - IBM_MAIL); + printk(TPACPI_ERR "please report this to %s\n", + TPACPI_MAIL); } else { /* * MHKV 0x100 in A31, R40, R40e, @@ -1825,10 +1825,10 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (tp_features.hotkey_mask) { if (!acpi_evalf(hkey_handle, &hotkey_all_mask, "MHKA", "qd")) { - printk(IBM_ERR + printk(TPACPI_ERR "missing MHKA handler, " "please report this to %s\n", - IBM_MAIL); + TPACPI_MAIL); hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */ } } @@ -1863,7 +1863,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* Not all thinkpads have a hardware radio switch */ if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { tp_features.hotkey_wlsw = 1; - printk(IBM_INFO + printk(TPACPI_INFO "radio switch found; radios are %s\n", enabled(status, 0)); res = add_to_attr_set(hotkey_dev_attributes, @@ -1882,7 +1882,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, GFP_KERNEL); if (!hotkey_keycode_map) { - printk(IBM_ERR "failed to allocate memory for key map\n"); + printk(TPACPI_ERR "failed to allocate memory for key map\n"); return -ENOMEM; } @@ -1957,7 +1957,7 @@ static void hotkey_exit(void) /* no short-circuit boolean operator below! */ if ((hotkey_mask_set(hotkey_orig_mask) | hotkey_status_set(hotkey_orig_status)) != 0) - printk(IBM_ERR "failed to restore hot key mask to BIOS defaults\n"); + printk(TPACPI_ERR "failed to restore hot key mask to BIOS defaults\n"); } if (hotkey_dev_attributes) { @@ -1974,7 +1974,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) int ignore_acpi_ev; if (event != 0x80) { - printk(IBM_ERR "unknown HKEY notification event %d\n", event); + printk(TPACPI_ERR "unknown HKEY notification event %d\n", event); /* forward it to userspace, maybe it knows how to handle it */ acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class, ibm->acpi->device->dev.bus_id, @@ -1984,7 +1984,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) while (1) { if (!acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) { - printk(IBM_ERR "failed to retrieve HKEY event\n"); + printk(TPACPI_ERR "failed to retrieve HKEY event\n"); return; } @@ -2008,7 +2008,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) ignore_acpi_ev = 1; } } else { - printk(IBM_ERR + printk(TPACPI_ERR "hotkey 0x%04x out of range for keyboard map\n", hkey); send_acpi_ev = 1; @@ -2019,7 +2019,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* we don't handle it through this path, just * eat up known LID events */ if (hkey != 0x5001 && hkey != 0x5002) { - printk(IBM_ERR + printk(TPACPI_ERR "unknown LID-related HKEY event: 0x%04x\n", hkey); send_acpi_ev = 1; @@ -2039,7 +2039,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* 0x2305 - T43 waking up due to bay lever eject while aslept */ /* case 3: ultra-bay related. maybe bay in dock? */ /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ - printk(IBM_NOTICE "unhandled HKEY event 0x%04x\n", hkey); + printk(TPACPI_NOTICE "unhandled HKEY event 0x%04x\n", hkey); send_acpi_ev = 1; } @@ -2060,7 +2060,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) static void hotkey_resume(void) { if (hotkey_mask_get()) - printk(IBM_ERR "error while trying to read hot key mask from firmware\n"); + printk(TPACPI_ERR "error while trying to read hot key mask from firmware\n"); tpacpi_input_send_radiosw(); #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL hotkey_poll_setup_safe(0); @@ -2145,7 +2145,7 @@ errexit: } static const struct acpi_device_id ibm_htk_device_ids[] = { - {IBM_HKEY_HID, 0}, + {TPACPI_ACPI_HKEY_HID, 0}, {"", 0}, }; @@ -2230,7 +2230,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "initializing bluetooth subdriver\n"); - IBM_ACPIHANDLE_INIT(hkey); + TPACPI_ACPIHANDLE_INIT(hkey); /* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, G4x, R30, R31, R40e, R50e, T20-22, X20-21 */ @@ -2404,7 +2404,7 @@ static int __init wan_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "initializing wan subdriver\n"); - IBM_ACPIHANDLE_INIT(hkey); + TPACPI_ACPIHANDLE_INIT(hkey); tp_features.wan = hkey_handle && acpi_evalf(hkey_handle, &status, "GWAN", "qd"); @@ -2543,14 +2543,14 @@ static int video_orig_autosw; static int video_autosw_get(void); static int video_autosw_set(int enable); -IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ +TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ "\\_SB.PCI0.VID0", /* 770e */ "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ "\\_SB.PCI0.AGP.VID", /* all others */ ); /* R30, R31 */ -IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ +TPACPI_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ static int __init video_init(struct ibm_init_struct *iibm) { @@ -2558,8 +2558,8 @@ static int __init video_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "initializing video subdriver\n"); - IBM_ACPIHANDLE_INIT(vid); - IBM_ACPIHANDLE_INIT(vid2); + TPACPI_ACPIHANDLE_INIT(vid); + TPACPI_ACPIHANDLE_INIT(vid2); if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga) /* G41, assume IVGA doesn't change */ @@ -2590,7 +2590,7 @@ static void video_exit(void) dbg_printk(TPACPI_DBG_EXIT, "restoring original video autoswitch mode\n"); if (video_autosw_set(video_orig_autosw)) - printk(IBM_ERR "error while trying to restore original " + printk(TPACPI_ERR "error while trying to restore original " "video autoswitch mode\n"); } @@ -2663,7 +2663,7 @@ static int video_outputsw_set(int status) res = acpi_evalf(vid_handle, NULL, "ASWT", "vdd", status * 0x100, 0); if (!autosw && video_autosw_set(autosw)) { - printk(IBM_ERR "video auto-switch left enabled due to error\n"); + printk(TPACPI_ERR "video auto-switch left enabled due to error\n"); return -EIO; } break; @@ -2732,7 +2732,7 @@ static int video_outputsw_cycle(void) return -ENOSYS; } if (!autosw && video_autosw_set(autosw)) { - printk(IBM_ERR "video auto-switch left enabled due to error\n"); + printk(TPACPI_ERR "video auto-switch left enabled due to error\n"); return -EIO; } @@ -2861,16 +2861,16 @@ static struct ibm_struct video_driver_data = { * Light (thinklight) subdriver */ -IBM_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ -IBM_HANDLE(ledb, ec, "LEDB"); /* G4x */ +TPACPI_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ +TPACPI_HANDLE(ledb, ec, "LEDB"); /* G4x */ static int __init light_init(struct ibm_init_struct *iibm) { vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n"); - IBM_ACPIHANDLE_INIT(ledb); - IBM_ACPIHANDLE_INIT(lght); - IBM_ACPIHANDLE_INIT(cmos); + TPACPI_ACPIHANDLE_INIT(ledb); + TPACPI_ACPIHANDLE_INIT(lght); + TPACPI_ACPIHANDLE_INIT(cmos); /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ tp_features.light = (cmos_handle || lght_handle) && !ledb_handle; @@ -2952,14 +2952,14 @@ static void dock_notify(struct ibm_struct *ibm, u32 event); static int dock_read(char *p); static int dock_write(char *buf); -IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ +TPACPI_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */ "\\_SB.PCI0.PCI1.DOCK", /* all others */ "\\_SB.PCI.ISA.SLCE", /* 570 */ ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ /* don't list other alternatives as we install a notify handler on the 570 */ -IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ +TPACPI_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ static const struct acpi_device_id ibm_pci_device_ids[] = { {PCI_ROOT_HID_STRING, 0}, @@ -3002,7 +3002,7 @@ static int __init dock_init(struct ibm_init_struct *iibm) { vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n"); - IBM_ACPIHANDLE_INIT(dock); + TPACPI_ACPIHANDLE_INIT(dock); vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n", str_supported(dock_handle != NULL)); @@ -3018,7 +3018,7 @@ static int __init dock_init2(struct ibm_init_struct *iibm) if (dock_driver_data[0].flags.acpi_driver_registered && dock_driver_data[0].flags.acpi_notify_installed) { - IBM_ACPIHANDLE_INIT(pci); + TPACPI_ACPIHANDLE_INIT(pci); dock2_needed = (pci_handle != NULL); vdbg_printk(TPACPI_DBG_INIT, "dock PCI handler for the TP 570 is %s\n", @@ -3050,7 +3050,7 @@ static void dock_notify(struct ibm_struct *ibm, u32 event) else if (event == 0 && docked) data = 3; /* dock */ else { - printk(IBM_ERR "unknown dock event %d, status %d\n", + printk(TPACPI_ERR "unknown dock event %d, status %d\n", event, _sta(dock_handle)); data = 0; /* unknown */ } @@ -3107,18 +3107,18 @@ static int dock_write(char *buf) #ifdef CONFIG_THINKPAD_ACPI_BAY -IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ +TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ ); /* A21e, R30, R31 */ -IBM_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ +TPACPI_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */ "_EJ0", /* all others */ ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */ -IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ +TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */ ); /* all others */ -IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ +TPACPI_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ "_EJ0", /* 770x */ ); /* all others */ @@ -3126,12 +3126,12 @@ static int __init bay_init(struct ibm_init_struct *iibm) { vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n"); - IBM_ACPIHANDLE_INIT(bay); + TPACPI_ACPIHANDLE_INIT(bay); if (bay_handle) - IBM_ACPIHANDLE_INIT(bay_ej); - IBM_ACPIHANDLE_INIT(bay2); + TPACPI_ACPIHANDLE_INIT(bay_ej); + TPACPI_ACPIHANDLE_INIT(bay2); if (bay2_handle) - IBM_ACPIHANDLE_INIT(bay2_ej); + TPACPI_ACPIHANDLE_INIT(bay2_ej); tp_features.bay_status = bay_handle && acpi_evalf(bay_handle, NULL, "_STA", "qv"); @@ -3260,7 +3260,7 @@ static int __init cmos_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "initializing cmos commands subdriver\n"); - IBM_ACPIHANDLE_INIT(cmos); + TPACPI_ACPIHANDLE_INIT(cmos); vdbg_printk(TPACPI_DBG_INIT, "cmos commands are %s\n", str_supported(cmos_handle != NULL)); @@ -3339,7 +3339,7 @@ enum { /* For TPACPI_LED_OLD */ static enum led_access_mode led_supported; -IBM_HANDLE(led, ec, "SLED", /* 570 */ +TPACPI_HANDLE(led, ec, "SLED", /* 570 */ "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ "LED", /* all others */ ); /* R30, R31 */ @@ -3348,7 +3348,7 @@ static int __init led_init(struct ibm_init_struct *iibm) { vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n"); - IBM_ACPIHANDLE_INIT(led); + TPACPI_ACPIHANDLE_INIT(led); if (!led_handle) /* led not supported on R30, R31 */ @@ -3467,13 +3467,13 @@ static struct ibm_struct led_driver_data = { * Beep subdriver */ -IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ +TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ static int __init beep_init(struct ibm_init_struct *iibm) { vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n"); - IBM_ACPIHANDLE_INIT(beep); + TPACPI_ACPIHANDLE_INIT(beep); vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n", str_supported(beep_handle != NULL)); @@ -3745,12 +3745,12 @@ static int __init thermal_init(struct ibm_init_struct *iibm) if (ta1 == 0) { /* This is sheer paranoia, but we handle it anyway */ if (acpi_tmp7) { - printk(IBM_ERR + printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " "falling back to ACPI TMPx access mode\n"); thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07; } else { - printk(IBM_ERR + printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " "disabling thermal sensors access\n"); thermal_read_mode = TPACPI_THERMAL_NONE; @@ -3953,7 +3953,7 @@ static int brightness_get(struct backlight_device *bd) } if (brightness_mode == 3 && lec != lcmos) { - printk(IBM_ERR + printk(TPACPI_ERR "CMOS NVRAM (%u) and EC (%u) do not agree " "on display brightness level\n", (unsigned int) lcmos, @@ -4035,8 +4035,8 @@ static int __init tpacpi_query_bcll_levels(acpi_handle handle) if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { obj = (union acpi_object *)buffer.pointer; if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { - printk(IBM_ERR "Unknown BCLL data, " - "please report this to %s\n", IBM_MAIL); + printk(TPACPI_ERR "Unknown BCLL data, " + "please report this to %s\n", TPACPI_MAIL); rc = 0; } else { rc = obj->package.count; @@ -4074,7 +4074,7 @@ static int __init brightness_check_levels(void) void *found_node = NULL; if (!vid_handle) { - IBM_ACPIHANDLE_INIT(vid); + TPACPI_ACPIHANDLE_INIT(vid); } if (!vid_handle) return 0; @@ -4107,7 +4107,7 @@ static int __init brightness_check_std_acpi_support(void) void *found_node = NULL; if (!vid_handle) { - IBM_ACPIHANDLE_INIT(vid); + TPACPI_ACPIHANDLE_INIT(vid); } if (!vid_handle) return 0; @@ -4133,7 +4133,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm) return 1; } else if (brightness_enable > 1) { if (brightness_check_std_acpi_support()) { - printk(IBM_NOTICE + printk(TPACPI_NOTICE "standard ACPI backlight interface available, not loading native one...\n"); return 1; } @@ -4161,13 +4161,13 @@ static int __init brightness_init(struct ibm_init_struct *iibm) return 1; if (tp_features.bright_16levels) - printk(IBM_INFO "detected a 16-level brightness capable ThinkPad\n"); + printk(TPACPI_INFO "detected a 16-level brightness capable ThinkPad\n"); ibm_backlight_device = backlight_device_register( TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL, &ibm_backlight_data); if (IS_ERR(ibm_backlight_device)) { - printk(IBM_ERR "Could not register backlight device\n"); + printk(TPACPI_ERR "Could not register backlight device\n"); return PTR_ERR(ibm_backlight_device); } vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n"); @@ -4491,11 +4491,11 @@ static struct mutex fan_mutex; static void fan_watchdog_fire(struct work_struct *ignored); static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire); -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ -IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ +TPACPI_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ +TPACPI_HANDLE(gfan, ec, "GFAN", /* 570 */ "\\FSPD", /* 600e/x, 770e, 770x */ ); /* all others */ -IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ +TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */ "JFNS", /* 770x-JL */ ); /* all others */ @@ -4790,7 +4790,7 @@ static void fan_watchdog_reset(void) if (!schedule_delayed_work(&fan_watchdog_task, msecs_to_jiffies(fan_watchdog_maxinterval * 1000))) { - printk(IBM_ERR "failed to schedule the fan watchdog, " + printk(TPACPI_ERR "failed to schedule the fan watchdog, " "watchdog will not trigger\n"); } } else @@ -4804,10 +4804,10 @@ static void fan_watchdog_fire(struct work_struct *ignored) if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING) return; - printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + printk(TPACPI_NOTICE "fan watchdog: enabling fan\n"); rc = fan_set_enable(); if (rc < 0) { - printk(IBM_ERR "fan watchdog: error %d while enabling fan, " + printk(TPACPI_ERR "fan watchdog: error %d while enabling fan, " "will try again later...\n", -rc); /* reschedule for later */ fan_watchdog_reset(); @@ -5047,9 +5047,9 @@ static int __init fan_init(struct ibm_init_struct *iibm) tp_features.fan_ctrl_status_undef = 0; fan_control_desired_level = 7; - IBM_ACPIHANDLE_INIT(fans); - IBM_ACPIHANDLE_INIT(gfan); - IBM_ACPIHANDLE_INIT(sfan); + TPACPI_ACPIHANDLE_INIT(fans); + TPACPI_ACPIHANDLE_INIT(gfan); + TPACPI_ACPIHANDLE_INIT(sfan); if (gfan_handle) { /* 570, 600e/x, 770e, 770x */ @@ -5075,7 +5075,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) case 0x3837: /* TP-78 */ case 0x3637: /* TP-76 */ case 0x3037: /* TP-70 */ - printk(IBM_NOTICE + printk(TPACPI_NOTICE "fan_init: initial fan status is " "unknown, assuming it is in auto " "mode\n"); @@ -5084,7 +5084,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) } } } else { - printk(IBM_ERR + printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " "fan status and control unavailable\n"); return 1; @@ -5255,7 +5255,7 @@ static int fan_write_cmd_level(const char *cmd, int *rc) return 0; if ((*rc = fan_set_level_safe(level)) == -ENXIO) - printk(IBM_ERR "level command accepted for unsupported " + printk(TPACPI_ERR "level command accepted for unsupported " "access mode %d", fan_control_access_mode); return 1; @@ -5267,7 +5267,7 @@ static int fan_write_cmd_enable(const char *cmd, int *rc) return 0; if ((*rc = fan_set_enable()) == -ENXIO) - printk(IBM_ERR "enable command accepted for unsupported " + printk(TPACPI_ERR "enable command accepted for unsupported " "access mode %d", fan_control_access_mode); return 1; @@ -5279,7 +5279,7 @@ static int fan_write_cmd_disable(const char *cmd, int *rc) return 0; if ((*rc = fan_set_disable()) == -ENXIO) - printk(IBM_ERR "disable command accepted for unsupported " + printk(TPACPI_ERR "disable command accepted for unsupported " "access mode %d", fan_control_access_mode); return 1; @@ -5296,7 +5296,7 @@ static int fan_write_cmd_speed(const char *cmd, int *rc) return 0; if ((*rc = fan_set_speed(speed)) == -ENXIO) - printk(IBM_ERR "speed command accepted for unsupported " + printk(TPACPI_ERR "speed command accepted for unsupported " "access mode %d", fan_control_access_mode); return 1; @@ -5360,7 +5360,7 @@ static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "%s\n", IBM_NAME); + return snprintf(buf, PAGE_SIZE, "%s\n", TPACPI_NAME); } static struct device_attribute dev_attr_thinkpad_acpi_pdev_name = @@ -5464,7 +5464,7 @@ static int __init ibm_init(struct ibm_init_struct *iibm) if (ibm->acpi->notify) { ret = setup_acpi_notify(ibm); if (ret == -ENODEV) { - printk(IBM_NOTICE "disabling subdriver %s\n", + printk(TPACPI_NOTICE "disabling subdriver %s\n", ibm->name); ret = 0; goto err_out; @@ -5482,7 +5482,7 @@ static int __init ibm_init(struct ibm_init_struct *iibm) S_IFREG | S_IRUGO | S_IWUSR, proc_dir); if (!entry) { - printk(IBM_ERR "unable to create proc entry %s\n", + printk(TPACPI_ERR "unable to create proc entry %s\n", ibm->name); ret = -ENODEV; goto err_out; @@ -5577,10 +5577,10 @@ static int __init probe_for_thinkpad(void) is_thinkpad = (thinkpad_id.model_str != NULL); /* ec is required because many other handles are relative to it */ - IBM_ACPIHANDLE_INIT(ec); + TPACPI_ACPIHANDLE_INIT(ec); if (!ec_handle) { if (is_thinkpad) - printk(IBM_ERR + printk(TPACPI_ERR "Not yet supported ThinkPad detected!\n"); return -ENODEV; } @@ -5731,28 +5731,28 @@ MODULE_PARM_DESC(hotkey_report_mode, "used for backwards compatibility with userspace, " "see documentation"); -#define IBM_PARAM(feature) \ +#define TPACPI_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ MODULE_PARM_DESC(feature, "Simulates thinkpad-aci procfs command " \ "at module load, see documentation") -IBM_PARAM(hotkey); -IBM_PARAM(bluetooth); -IBM_PARAM(video); -IBM_PARAM(light); +TPACPI_PARAM(hotkey); +TPACPI_PARAM(bluetooth); +TPACPI_PARAM(video); +TPACPI_PARAM(light); #ifdef CONFIG_THINKPAD_ACPI_DOCK -IBM_PARAM(dock); +TPACPI_PARAM(dock); #endif #ifdef CONFIG_THINKPAD_ACPI_BAY -IBM_PARAM(bay); +TPACPI_PARAM(bay); #endif /* CONFIG_THINKPAD_ACPI_BAY */ -IBM_PARAM(cmos); -IBM_PARAM(led); -IBM_PARAM(beep); -IBM_PARAM(ecdump); -IBM_PARAM(brightness); -IBM_PARAM(volume); -IBM_PARAM(fan); +TPACPI_PARAM(cmos); +TPACPI_PARAM(led); +TPACPI_PARAM(beep); +TPACPI_PARAM(ecdump); +TPACPI_PARAM(brightness); +TPACPI_PARAM(volume); +TPACPI_PARAM(fan); static void thinkpad_acpi_module_exit(void) { @@ -5798,7 +5798,7 @@ static void thinkpad_acpi_module_exit(void) platform_driver_unregister(&tpacpi_pdriver); if (proc_dir) - remove_proc_entry(IBM_PROC_DIR, acpi_root_dir); + remove_proc_entry(TPACPI_PROC_DIR, acpi_root_dir); kfree(thinkpad_id.bios_version_str); kfree(thinkpad_id.ec_version_str); @@ -5827,12 +5827,12 @@ static int __init thinkpad_acpi_module_init(void) /* Driver initialization */ - IBM_ACPIHANDLE_INIT(ecrd); - IBM_ACPIHANDLE_INIT(ecwr); + TPACPI_ACPIHANDLE_INIT(ecrd); + TPACPI_ACPIHANDLE_INIT(ecwr); - proc_dir = proc_mkdir(IBM_PROC_DIR, acpi_root_dir); + proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir); if (!proc_dir) { - printk(IBM_ERR "unable to create proc dir " IBM_PROC_DIR); + printk(TPACPI_ERR "unable to create proc dir " TPACPI_PROC_DIR); thinkpad_acpi_module_exit(); return -ENODEV; } @@ -5840,7 +5840,7 @@ static int __init thinkpad_acpi_module_init(void) ret = platform_driver_register(&tpacpi_pdriver); if (ret) { - printk(IBM_ERR "unable to register main platform driver\n"); + printk(TPACPI_ERR "unable to register main platform driver\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5848,7 +5848,7 @@ static int __init thinkpad_acpi_module_init(void) ret = platform_driver_register(&tpacpi_hwmon_pdriver); if (ret) { - printk(IBM_ERR "unable to register hwmon platform driver\n"); + printk(TPACPI_ERR "unable to register hwmon platform driver\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5860,7 +5860,7 @@ static int __init thinkpad_acpi_module_init(void) ret = tpacpi_create_driver_attributes(&tpacpi_hwmon_pdriver.driver); } if (ret) { - printk(IBM_ERR "unable to create sysfs driver attributes\n"); + printk(TPACPI_ERR "unable to create sysfs driver attributes\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5868,29 +5868,29 @@ static int __init thinkpad_acpi_module_init(void) /* Device initialization */ - tpacpi_pdev = platform_device_register_simple(IBM_DRVR_NAME, -1, + tpacpi_pdev = platform_device_register_simple(TPACPI_DRVR_NAME, -1, NULL, 0); if (IS_ERR(tpacpi_pdev)) { ret = PTR_ERR(tpacpi_pdev); tpacpi_pdev = NULL; - printk(IBM_ERR "unable to register platform device\n"); + printk(TPACPI_ERR "unable to register platform device\n"); thinkpad_acpi_module_exit(); return ret; } tpacpi_sensors_pdev = platform_device_register_simple( - IBM_HWMON_DRVR_NAME, + TPACPI_HWMON_DRVR_NAME, -1, NULL, 0); if (IS_ERR(tpacpi_sensors_pdev)) { ret = PTR_ERR(tpacpi_sensors_pdev); tpacpi_sensors_pdev = NULL; - printk(IBM_ERR "unable to register hwmon platform device\n"); + printk(TPACPI_ERR "unable to register hwmon platform device\n"); thinkpad_acpi_module_exit(); return ret; } ret = device_create_file(&tpacpi_sensors_pdev->dev, &dev_attr_thinkpad_acpi_pdev_name); if (ret) { - printk(IBM_ERR + printk(TPACPI_ERR "unable to create sysfs hwmon device attributes\n"); thinkpad_acpi_module_exit(); return ret; @@ -5900,20 +5900,20 @@ static int __init thinkpad_acpi_module_init(void) if (IS_ERR(tpacpi_hwmon)) { ret = PTR_ERR(tpacpi_hwmon); tpacpi_hwmon = NULL; - printk(IBM_ERR "unable to register hwmon device\n"); + printk(TPACPI_ERR "unable to register hwmon device\n"); thinkpad_acpi_module_exit(); return ret; } mutex_init(&tpacpi_inputdev_send_mutex); tpacpi_inputdev = input_allocate_device(); if (!tpacpi_inputdev) { - printk(IBM_ERR "unable to allocate input device\n"); + printk(TPACPI_ERR "unable to allocate input device\n"); thinkpad_acpi_module_exit(); return -ENOMEM; } else { /* Prepare input device, but don't register */ tpacpi_inputdev->name = "ThinkPad Extra Buttons"; - tpacpi_inputdev->phys = IBM_DRVR_NAME "/input0"; + tpacpi_inputdev->phys = TPACPI_DRVR_NAME "/input0"; tpacpi_inputdev->id.bustype = BUS_HOST; tpacpi_inputdev->id.vendor = (thinkpad_id.vendor) ? thinkpad_id.vendor : @@ -5932,7 +5932,7 @@ static int __init thinkpad_acpi_module_init(void) } ret = input_register_device(tpacpi_inputdev); if (ret < 0) { - printk(IBM_ERR "unable to register input device\n"); + printk(TPACPI_ERR "unable to register input device\n"); thinkpad_acpi_module_exit(); return ret; } else { @@ -5970,8 +5970,8 @@ IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); IBM_BIOS_MODULE_ALIAS("K[U,X-Z]"); MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); -MODULE_DESCRIPTION(IBM_DESC); -MODULE_VERSION(IBM_VERSION); +MODULE_DESCRIPTION(TPACPI_DESC); +MODULE_VERSION(TPACPI_VERSION); MODULE_LICENSE("GPL"); module_init(thinkpad_acpi_module_init); From 35ff8b9fa90d97f3a19ea3e2311385927535ebc9 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:49 -0200 Subject: [PATCH 043/112] ACPI: thinkpad-acpi: some checkpatch.pl fluff Fix some of the crap reported by checkpatch.pl. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 291 +++++++++++++++++++++-------------- 1 file changed, 175 insertions(+), 116 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index c92ae8d92b28..dd6fa81fa868 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -150,7 +150,8 @@ enum { #define TPACPI_DBG_EXIT 0x0002 #define dbg_printk(a_dbg_level, format, arg...) \ do { if (dbg_level & a_dbg_level) \ - printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); } while (0) + printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); \ + } while (0) #ifdef CONFIG_THINKPAD_ACPI_DEBUG #define vdbg_printk(a_dbg_level, format, arg...) \ dbg_printk(a_dbg_level, format, ## arg) @@ -159,9 +160,9 @@ static const char *str_supported(int is_supported); #define vdbg_printk(a_dbg_level, format, arg...) #endif -#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") -#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") -#define strlencmp(a,b) (strncmp((a), (b), strlen(b))) +#define onoff(status, bit) ((status) & (1 << (bit)) ? "on" : "off") +#define enabled(status, bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") +#define strlencmp(a, b) (strncmp((a), (b), strlen(b))) /**************************************************************************** @@ -288,7 +289,8 @@ TPACPI_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ TPACPI_HANDLE(ecrd, ec, "ECRD"); /* 570 */ TPACPI_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -TPACPI_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, T4x, X31, X40 */ +TPACPI_HANDLE(cmos, root, "\\UCMS", /* R50, R50e, R50p, R51, */ + /* T4x, X31, X40 */ "\\CMOS", /* A3x, G4x, R32, T23, T30, X22-24, X30 */ "\\CMS", /* R40, R40e */ ); /* all others */ @@ -382,7 +384,7 @@ static int acpi_evalf(acpi_handle handle, return success; } -static int acpi_ec_read(int i, u8 * p) +static int acpi_ec_read(int i, u8 *p) { int v; @@ -436,8 +438,8 @@ static int issue_thinkpad_cmos_command(int cmos_cmd) * ACPI device model */ -#define TPACPI_ACPIHANDLE_INIT(object) \ - drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ +#define TPACPI_ACPIHANDLE_INIT(object) \ + drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \ object##_paths, ARRAY_SIZE(object##_paths), &object##_path) static void drv_acpi_handle_init(char *name, @@ -508,11 +510,13 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm) ibm->acpi->type, dispatch_acpi_notify, ibm); if (ACPI_FAILURE(status)) { if (status == AE_ALREADY_EXISTS) { - printk(TPACPI_NOTICE "another device driver is already handling %s events\n", - ibm->name); + printk(TPACPI_NOTICE + "another device driver is already " + "handling %s events\n", ibm->name); } else { - printk(TPACPI_ERR "acpi_install_notify_handler(%s) failed: %d\n", - ibm->name, status); + printk(TPACPI_ERR + "acpi_install_notify_handler(%s) failed: %d\n", + ibm->name, status); } return -ENODEV; } @@ -592,7 +596,7 @@ static int dispatch_procfs_read(char *page, char **start, off_t off, } static int dispatch_procfs_write(struct file *file, - const char __user * userbuf, + const char __user *userbuf, unsigned long count, void *data) { struct ibm_struct *ibm = data; @@ -698,7 +702,7 @@ struct attribute_set_obj { } __attribute__((packed)); static struct attribute_set *create_attr_set(unsigned int max_members, - const char* name) + const char *name) { struct attribute_set_obj *sobj; @@ -722,7 +726,7 @@ static struct attribute_set *create_attr_set(unsigned int max_members, kfree(_set); /* not multi-threaded safe, use it in a single thread per set */ -static int add_to_attr_set(struct attribute_set* s, struct attribute *attr) +static int add_to_attr_set(struct attribute_set *s, struct attribute *attr) { if (!s || !attr) return -EINVAL; @@ -736,7 +740,7 @@ static int add_to_attr_set(struct attribute_set* s, struct attribute *attr) return 0; } -static int add_many_to_attr_set(struct attribute_set* s, +static int add_many_to_attr_set(struct attribute_set *s, struct attribute **attr, unsigned int count) { @@ -751,7 +755,7 @@ static int add_many_to_attr_set(struct attribute_set* s, return 0; } -static void delete_attr_set(struct attribute_set* s, struct kobject *kobj) +static void delete_attr_set(struct attribute_set *s, struct kobject *kobj) { sysfs_remove_group(kobj, &s->group); destroy_attr_set(s); @@ -818,7 +822,8 @@ static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, static ssize_t tpacpi_driver_version_show(struct device_driver *drv, char *buf) { - return snprintf(buf, PAGE_SIZE, "%s v%s\n", TPACPI_DESC, TPACPI_VERSION); + return snprintf(buf, PAGE_SIZE, "%s v%s\n", + TPACPI_DESC, TPACPI_VERSION); } static DRIVER_ATTR(version, S_IRUGO, @@ -826,7 +831,7 @@ static DRIVER_ATTR(version, S_IRUGO, /* --------------------------------------------------------------------- */ -static struct driver_attribute* tpacpi_driver_attributes[] = { +static struct driver_attribute *tpacpi_driver_attributes[] = { &driver_attr_debug_level, &driver_attr_version, &driver_attr_interface_version, }; @@ -849,7 +854,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) { int i; - for(i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++) + for (i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++) driver_remove_file(drv, tpacpi_driver_attributes[i]); } @@ -1010,8 +1015,10 @@ static struct attribute_set *hotkey_dev_attributes; #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL #define HOTKEY_CONFIG_CRITICAL_START \ - mutex_lock(&hotkey_thread_data_mutex); \ - hotkey_config_change++; + do { \ + mutex_lock(&hotkey_thread_data_mutex); \ + hotkey_config_change++; \ + } while (0); #define HOTKEY_CONFIG_CRITICAL_END \ mutex_unlock(&hotkey_thread_data_mutex); #else @@ -1205,15 +1212,18 @@ static void hotkey_read_nvram(struct tp_nvram_state *n, u32 m) } #define TPACPI_COMPARE_KEY(__scancode, __member) \ - do { if ((mask & (1 << __scancode)) && oldn->__member != newn->__member) \ - tpacpi_hotkey_send_key(__scancode); } while (0) + do { \ + if ((mask & (1 << __scancode)) && \ + oldn->__member != newn->__member) \ + tpacpi_hotkey_send_key(__scancode); \ + } while (0) #define TPACPI_MAY_SEND_KEY(__scancode) \ do { if (mask & (1 << __scancode)) \ tpacpi_hotkey_send_key(__scancode); } while (0) static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn, - struct tp_nvram_state *newn, + struct tp_nvram_state *newn, u32 mask) { TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle); @@ -1316,7 +1326,7 @@ static int hotkey_kthread(void *data) hotkey_read_nvram(&s[si], mask); if (likely(si != so)) { hotkey_compare_and_issue_event(&s[so], &s[si], - mask); + mask); } } @@ -1352,10 +1362,12 @@ static void hotkey_poll_setup(int may_warn) (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) { if (!tpacpi_hotkey_task) { tpacpi_hotkey_task = kthread_run(hotkey_kthread, - NULL, TPACPI_FILE "d"); + NULL, + TPACPI_FILE "d"); if (IS_ERR(tpacpi_hotkey_task)) { tpacpi_hotkey_task = NULL; - printk(TPACPI_ERR "could not create kernel thread " + printk(TPACPI_ERR + "could not create kernel thread " "for hotkey polling\n"); } } @@ -1363,7 +1375,8 @@ static void hotkey_poll_setup(int may_warn) hotkey_poll_stop_sync(); if (may_warn && hotkey_source_mask != 0 && hotkey_poll_freq == 0) { - printk(TPACPI_NOTICE "hot keys 0x%08x require polling, " + printk(TPACPI_NOTICE + "hot keys 0x%08x require polling, " "which is currently disabled\n", hotkey_source_mask); } @@ -1829,7 +1842,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) "missing MHKA handler, " "please report this to %s\n", TPACPI_MAIL); - hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */ + /* FN+F12, FN+F4, FN+F3 */ + hotkey_all_mask = 0x080cU; } } @@ -1882,7 +1896,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, GFP_KERNEL); if (!hotkey_keycode_map) { - printk(TPACPI_ERR "failed to allocate memory for key map\n"); + printk(TPACPI_ERR + "failed to allocate memory for key map\n"); return -ENOMEM; } @@ -1953,11 +1968,14 @@ static void hotkey_exit(void) #endif if (tp_features.hotkey) { - dbg_printk(TPACPI_DBG_EXIT, "restoring original hot key mask\n"); + dbg_printk(TPACPI_DBG_EXIT, + "restoring original hot key mask\n"); /* no short-circuit boolean operator below! */ if ((hotkey_mask_set(hotkey_orig_mask) | hotkey_status_set(hotkey_orig_status)) != 0) - printk(TPACPI_ERR "failed to restore hot key mask to BIOS defaults\n"); + printk(TPACPI_ERR + "failed to restore hot key mask " + "to BIOS defaults\n"); } if (hotkey_dev_attributes) { @@ -1974,11 +1992,13 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) int ignore_acpi_ev; if (event != 0x80) { - printk(TPACPI_ERR "unknown HKEY notification event %d\n", event); + printk(TPACPI_ERR + "unknown HKEY notification event %d\n", event); /* forward it to userspace, maybe it knows how to handle it */ - acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class, - ibm->acpi->device->dev.bus_id, - event, 0); + acpi_bus_generate_netlink_event( + ibm->acpi->device->pnp.device_class, + ibm->acpi->device->dev.bus_id, + event, 0); return; } @@ -2009,8 +2029,8 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } } else { printk(TPACPI_ERR - "hotkey 0x%04x out of range for keyboard map\n", - hkey); + "hotkey 0x%04x out of range " + "for keyboard map\n", hkey); send_acpi_ev = 1; } break; @@ -2020,8 +2040,8 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) * eat up known LID events */ if (hkey != 0x5001 && hkey != 0x5002) { printk(TPACPI_ERR - "unknown LID-related HKEY event: 0x%04x\n", - hkey); + "unknown LID-related HKEY event: " + "0x%04x\n", hkey); send_acpi_ev = 1; } else { ignore_acpi_ev = 1; @@ -2036,23 +2056,29 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* fallthrough to default */ default: /* case 2: dock-related */ - /* 0x2305 - T43 waking up due to bay lever eject while aslept */ + /* 0x2305 - T43 waking up due to bay lever + * eject while aslept */ /* case 3: ultra-bay related. maybe bay in dock? */ - /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ - printk(TPACPI_NOTICE "unhandled HKEY event 0x%04x\n", hkey); + /* 0x3003 - T43 after wake up by bay lever + * eject (0x2305) */ + printk(TPACPI_NOTICE + "unhandled HKEY event 0x%04x\n", hkey); send_acpi_ev = 1; } /* Legacy events */ - if (!ignore_acpi_ev && (send_acpi_ev || hotkey_report_mode < 2)) { - acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey); + if (!ignore_acpi_ev && + (send_acpi_ev || hotkey_report_mode < 2)) { + acpi_bus_generate_proc_event(ibm->acpi->device, + event, hkey); } /* netlink events */ if (!ignore_acpi_ev && send_acpi_ev) { - acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class, - ibm->acpi->device->dev.bus_id, - event, hkey); + acpi_bus_generate_netlink_event( + ibm->acpi->device->pnp.device_class, + ibm->acpi->device->dev.bus_id, + event, hkey); } } } @@ -2060,7 +2086,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) static void hotkey_resume(void) { if (hotkey_mask_get()) - printk(TPACPI_ERR "error while trying to read hot key mask from firmware\n"); + printk(TPACPI_ERR + "error while trying to read hot key mask " + "from firmware\n"); tpacpi_input_send_radiosw(); #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL hotkey_poll_setup_safe(0); @@ -2663,13 +2691,14 @@ static int video_outputsw_set(int status) res = acpi_evalf(vid_handle, NULL, "ASWT", "vdd", status * 0x100, 0); if (!autosw && video_autosw_set(autosw)) { - printk(TPACPI_ERR "video auto-switch left enabled due to error\n"); + printk(TPACPI_ERR + "video auto-switch left enabled due to error\n"); return -EIO; } break; case TPACPI_VIDEO_NEW: res = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) && - acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1); + acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1); break; default: return -ENOSYS; @@ -2732,7 +2761,8 @@ static int video_outputsw_cycle(void) return -ENOSYS; } if (!autosw && video_autosw_set(autosw)) { - printk(TPACPI_ERR "video auto-switch left enabled due to error\n"); + printk(TPACPI_ERR + "video auto-switch left enabled due to error\n"); return -EIO; } @@ -3340,7 +3370,8 @@ enum { /* For TPACPI_LED_OLD */ static enum led_access_mode led_supported; TPACPI_HANDLE(led, ec, "SLED", /* 570 */ - "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + "SYSL", /* 600e/x, 770e, 770x, A21e, A2xm/p, */ + /* T20-22, X20-21 */ "LED", /* all others */ ); /* R30, R31 */ @@ -3437,13 +3468,11 @@ static int led_write(char *buf) led = 1 << led; ret = ec_write(TPACPI_LED_EC_HLMS, led); if (ret >= 0) - ret = - ec_write(TPACPI_LED_EC_HLBL, - led * led_exp_hlbl[ind]); + ret = ec_write(TPACPI_LED_EC_HLBL, + led * led_exp_hlbl[ind]); if (ret >= 0) - ret = - ec_write(TPACPI_LED_EC_HLCL, - led * led_exp_hlcl[ind]); + ret = ec_write(TPACPI_LED_EC_HLCL, + led * led_exp_hlcl[ind]); if (ret < 0) return ret; } else { @@ -3620,7 +3649,7 @@ static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s) if (thermal_read_mode == TPACPI_THERMAL_TPEC_16) n = 16; - for(i = 0 ; i < n; i++) { + for (i = 0 ; i < n; i++) { res = thermal_get_sensor(i, &s->temp[i]); if (res) return res; @@ -3651,7 +3680,8 @@ static ssize_t thermal_temp_input_show(struct device *dev, } #define THERMAL_SENSOR_ATTR_TEMP(_idxA, _idxB) \ - SENSOR_ATTR(temp##_idxA##_input, S_IRUGO, thermal_temp_input_show, NULL, _idxB) + SENSOR_ATTR(temp##_idxA##_input, S_IRUGO, \ + thermal_temp_input_show, NULL, _idxB) static struct sensor_device_attribute sensor_dev_attr_thermal_temp_input[] = { THERMAL_SENSOR_ATTR_TEMP(1, 0), @@ -3747,7 +3777,8 @@ static int __init thermal_init(struct ibm_init_struct *iibm) if (acpi_tmp7) { printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " - "falling back to ACPI TMPx access mode\n"); + "falling back to ACPI TMPx access " + "mode\n"); thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07; } else { printk(TPACPI_ERR @@ -3777,7 +3808,7 @@ static int __init thermal_init(struct ibm_init_struct *iibm) str_supported(thermal_read_mode != TPACPI_THERMAL_NONE), thermal_read_mode); - switch(thermal_read_mode) { + switch (thermal_read_mode) { case TPACPI_THERMAL_TPEC_16: res = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &thermal_temp_input16_group); @@ -3802,7 +3833,7 @@ static int __init thermal_init(struct ibm_init_struct *iibm) static void thermal_exit(void) { - switch(thermal_read_mode) { + switch (thermal_read_mode) { case TPACPI_THERMAL_TPEC_16: sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, &thermal_temp_input16_group); @@ -4020,8 +4051,8 @@ static int brightness_update_status(struct backlight_device *bd) } static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, + .get_brightness = brightness_get, + .update_status = brightness_update_status, }; /* --------------------------------------------------------------------- */ @@ -4081,7 +4112,8 @@ static int __init brightness_check_levels(void) /* Search for a BCLL package with 16 levels */ status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3, - brightness_find_bcll, NULL, &found_node); + brightness_find_bcll, NULL, + &found_node); return (ACPI_SUCCESS(status) && found_node != NULL); } @@ -4114,7 +4146,7 @@ static int __init brightness_check_std_acpi_support(void) /* Search for a _BCL method, but don't execute it */ status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, - brightness_find_bcl, NULL, &found_node); + brightness_find_bcl, NULL, &found_node); return (ACPI_SUCCESS(status) && found_node != NULL); } @@ -4129,12 +4161,14 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (!brightness_enable) { dbg_printk(TPACPI_DBG_INIT, - "brightness support disabled by module parameter\n"); + "brightness support disabled by " + "module parameter\n"); return 1; } else if (brightness_enable > 1) { if (brightness_check_std_acpi_support()) { printk(TPACPI_NOTICE - "standard ACPI backlight interface available, not loading native one...\n"); + "standard ACPI backlight interface " + "available, not loading native one...\n"); return 1; } } @@ -4161,7 +4195,8 @@ static int __init brightness_init(struct ibm_init_struct *iibm) return 1; if (tp_features.bright_16levels) - printk(TPACPI_INFO "detected a 16-level brightness capable ThinkPad\n"); + printk(TPACPI_INFO + "detected a 16-level brightness capable ThinkPad\n"); ibm_backlight_device = backlight_device_register( TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL, @@ -4195,7 +4230,8 @@ static int brightness_read(char *p) int len = 0; int level; - if ((level = brightness_get(NULL)) < 0) { + level = brightness_get(NULL); + if (level < 0) { len += sprintf(p + len, "level:\t\tunreadable\n"); } else { len += sprintf(p + len, "level:\t\t%d\n", level); @@ -4303,8 +4339,11 @@ static int volume_write(char *buf) } else return -EINVAL; - if (new_level != level) { /* mute doesn't change */ - cmos_cmd = new_level > level ? TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; + if (new_level != level) { + /* mute doesn't change */ + + cmos_cmd = (new_level > level) ? + TP_CMOS_VOLUME_UP : TP_CMOS_VOLUME_DOWN; inc = new_level > level ? 1 : -1; if (mute && (issue_thinkpad_cmos_command(cmos_cmd) || @@ -4316,14 +4355,18 @@ static int volume_write(char *buf) !acpi_ec_write(volume_offset, i + inc)) return -EIO; - if (mute && (issue_thinkpad_cmos_command(TP_CMOS_VOLUME_MUTE) || - !acpi_ec_write(volume_offset, - new_level + mute))) + if (mute && + (issue_thinkpad_cmos_command(TP_CMOS_VOLUME_MUTE) || + !acpi_ec_write(volume_offset, new_level + mute))) { return -EIO; + } } - if (new_mute != mute) { /* level doesn't change */ - cmos_cmd = new_mute ? TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; + if (new_mute != mute) { + /* level doesn't change */ + + cmos_cmd = (new_mute) ? + TP_CMOS_VOLUME_MUTE : TP_CMOS_VOLUME_UP; if (issue_thinkpad_cmos_command(cmos_cmd) || !acpi_ec_write(volume_offset, level + new_mute)) @@ -4694,7 +4737,7 @@ static int fan_set_enable(void) s |= 4; if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) - rc= -EIO; + rc = -EIO; else rc = 0; break; @@ -4790,7 +4833,8 @@ static void fan_watchdog_reset(void) if (!schedule_delayed_work(&fan_watchdog_task, msecs_to_jiffies(fan_watchdog_maxinterval * 1000))) { - printk(TPACPI_ERR "failed to schedule the fan watchdog, " + printk(TPACPI_ERR + "failed to schedule the fan watchdog, " "watchdog will not trigger\n"); } } else @@ -5076,9 +5120,9 @@ static int __init fan_init(struct ibm_init_struct *iibm) case 0x3637: /* TP-76 */ case 0x3037: /* TP-70 */ printk(TPACPI_NOTICE - "fan_init: initial fan status is " - "unknown, assuming it is in auto " - "mode\n"); + "fan_init: initial fan status " + "is unknown, assuming it is " + "in auto mode\n"); tp_features.fan_ctrl_status_undef = 1; ;; } @@ -5151,11 +5195,13 @@ static int __init fan_init(struct ibm_init_struct *iibm) static void fan_exit(void) { - vdbg_printk(TPACPI_DBG_EXIT, "cancelling any pending fan watchdog tasks\n"); + vdbg_printk(TPACPI_DBG_EXIT, + "cancelling any pending fan watchdog tasks\n"); /* FIXME: can we really do this unconditionally? */ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); - driver_remove_file(&tpacpi_hwmon_pdriver.driver, &driver_attr_fan_watchdog); + driver_remove_file(&tpacpi_hwmon_pdriver.driver, + &driver_attr_fan_watchdog); cancel_delayed_work(&fan_watchdog_task); flush_scheduled_work(); @@ -5171,7 +5217,8 @@ static int fan_read(char *p) switch (fan_status_access_mode) { case TPACPI_FAN_RD_ACPI_GFAN: /* 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status_safe(&status)) < 0) + rc = fan_get_status_safe(&status); + if (rc < 0) return rc; len += sprintf(p + len, "status:\t\t%s\n" @@ -5181,7 +5228,8 @@ static int fan_read(char *p) case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ - if ((rc = fan_get_status_safe(&status)) < 0) + rc = fan_get_status_safe(&status); + if (rc < 0) return rc; if (unlikely(tp_features.fan_ctrl_status_undef)) { @@ -5196,7 +5244,8 @@ static int fan_read(char *p) len += sprintf(p + len, "status:\t\t%s\n", (status != 0) ? "enabled" : "disabled"); - if ((rc = fan_get_speed(&speed)) < 0) + rc = fan_get_speed(&speed); + if (rc < 0) return rc; len += sprintf(p + len, "speed:\t\t%d\n", speed); @@ -5232,8 +5281,8 @@ static int fan_read(char *p) if (fan_control_commands & TPACPI_FAN_CMD_ENABLE) len += sprintf(p + len, "commands:\tenable, disable\n" - "commands:\twatchdog ( is 0 (off), " - "1-120 (seconds))\n"); + "commands:\twatchdog ( " + "is 0 (off), 1-120 (seconds))\n"); if (fan_control_commands & TPACPI_FAN_CMD_SPEED) len += sprintf(p + len, "commands:\tspeed " @@ -5249,12 +5298,13 @@ static int fan_write_cmd_level(const char *cmd, int *rc) if (strlencmp(cmd, "level auto") == 0) level = TP_EC_FAN_AUTO; else if ((strlencmp(cmd, "level disengaged") == 0) | - (strlencmp(cmd, "level full-speed") == 0)) + (strlencmp(cmd, "level full-speed") == 0)) level = TP_EC_FAN_FULLSPEED; else if (sscanf(cmd, "level %d", &level) != 1) return 0; - if ((*rc = fan_set_level_safe(level)) == -ENXIO) + *rc = fan_set_level_safe(level); + if (*rc == -ENXIO) printk(TPACPI_ERR "level command accepted for unsupported " "access mode %d", fan_control_access_mode); @@ -5266,7 +5316,8 @@ static int fan_write_cmd_enable(const char *cmd, int *rc) if (strlencmp(cmd, "enable") != 0) return 0; - if ((*rc = fan_set_enable()) == -ENXIO) + *rc = fan_set_enable(); + if (*rc == -ENXIO) printk(TPACPI_ERR "enable command accepted for unsupported " "access mode %d", fan_control_access_mode); @@ -5278,7 +5329,8 @@ static int fan_write_cmd_disable(const char *cmd, int *rc) if (strlencmp(cmd, "disable") != 0) return 0; - if ((*rc = fan_set_disable()) == -ENXIO) + *rc = fan_set_disable(); + if (*rc == -ENXIO) printk(TPACPI_ERR "disable command accepted for unsupported " "access mode %d", fan_control_access_mode); @@ -5295,7 +5347,8 @@ static int fan_write_cmd_speed(const char *cmd, int *rc) if (sscanf(cmd, "speed %d", &speed) != 1) return 0; - if ((*rc = fan_set_speed(speed)) == -ENXIO) + *rc = fan_set_speed(speed); + if (*rc == -ENXIO) printk(TPACPI_ERR "speed command accepted for unsupported " "access mode %d", fan_control_access_mode); @@ -5703,38 +5756,38 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) module_param(experimental, int, 0); MODULE_PARM_DESC(experimental, - "Enables experimental features when non-zero"); + "Enables experimental features when non-zero"); module_param_named(debug, dbg_level, uint, 0); MODULE_PARM_DESC(debug, "Sets debug level bit-mask"); module_param(force_load, bool, 0); MODULE_PARM_DESC(force_load, - "Attempts to load the driver even on a " - "mis-identified ThinkPad when true"); + "Attempts to load the driver even on a " + "mis-identified ThinkPad when true"); module_param_named(fan_control, fan_control_allowed, bool, 0); MODULE_PARM_DESC(fan_control, - "Enables setting fan parameters features when true"); + "Enables setting fan parameters features when true"); module_param_named(brightness_mode, brightness_mode, int, 0); MODULE_PARM_DESC(brightness_mode, - "Selects brightness control strategy: " - "0=auto, 1=EC, 2=CMOS, 3=both"); + "Selects brightness control strategy: " + "0=auto, 1=EC, 2=CMOS, 3=both"); module_param(brightness_enable, uint, 0); MODULE_PARM_DESC(brightness_enable, - "Enables backlight control when 1, disables when 0"); + "Enables backlight control when 1, disables when 0"); module_param(hotkey_report_mode, uint, 0); MODULE_PARM_DESC(hotkey_report_mode, - "used for backwards compatibility with userspace, " - "see documentation"); + "used for backwards compatibility with userspace, " + "see documentation"); #define TPACPI_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0); \ MODULE_PARM_DESC(feature, "Simulates thinkpad-aci procfs command " \ - "at module load, see documentation") + "at module load, see documentation") TPACPI_PARAM(hotkey); TPACPI_PARAM(bluetooth); @@ -5832,7 +5885,8 @@ static int __init thinkpad_acpi_module_init(void) proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir); if (!proc_dir) { - printk(TPACPI_ERR "unable to create proc dir " TPACPI_PROC_DIR); + printk(TPACPI_ERR + "unable to create proc dir " TPACPI_PROC_DIR); thinkpad_acpi_module_exit(); return -ENODEV; } @@ -5840,7 +5894,8 @@ static int __init thinkpad_acpi_module_init(void) ret = platform_driver_register(&tpacpi_pdriver); if (ret) { - printk(TPACPI_ERR "unable to register main platform driver\n"); + printk(TPACPI_ERR + "unable to register main platform driver\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5848,7 +5903,8 @@ static int __init thinkpad_acpi_module_init(void) ret = platform_driver_register(&tpacpi_hwmon_pdriver); if (ret) { - printk(TPACPI_ERR "unable to register hwmon platform driver\n"); + printk(TPACPI_ERR + "unable to register hwmon platform driver\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5857,10 +5913,12 @@ static int __init thinkpad_acpi_module_init(void) ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver); if (!ret) { tp_features.platform_drv_attrs_registered = 1; - ret = tpacpi_create_driver_attributes(&tpacpi_hwmon_pdriver.driver); + ret = tpacpi_create_driver_attributes( + &tpacpi_hwmon_pdriver.driver); } if (ret) { - printk(TPACPI_ERR "unable to create sysfs driver attributes\n"); + printk(TPACPI_ERR + "unable to create sysfs driver attributes\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5878,12 +5936,13 @@ static int __init thinkpad_acpi_module_init(void) return ret; } tpacpi_sensors_pdev = platform_device_register_simple( - TPACPI_HWMON_DRVR_NAME, - -1, NULL, 0); + TPACPI_HWMON_DRVR_NAME, + -1, NULL, 0); if (IS_ERR(tpacpi_sensors_pdev)) { ret = PTR_ERR(tpacpi_sensors_pdev); tpacpi_sensors_pdev = NULL; - printk(TPACPI_ERR "unable to register hwmon platform device\n"); + printk(TPACPI_ERR + "unable to register hwmon platform device\n"); thinkpad_acpi_module_exit(); return ret; } @@ -5891,7 +5950,7 @@ static int __init thinkpad_acpi_module_init(void) &dev_attr_thinkpad_acpi_pdev_name); if (ret) { printk(TPACPI_ERR - "unable to create sysfs hwmon device attributes\n"); + "unable to create sysfs hwmon device attributes\n"); thinkpad_acpi_module_exit(); return ret; } From 083f17606f624c79555e313d87cf37ac1486b073 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:50 -0200 Subject: [PATCH 044/112] ACPI: thinkpad-acpi: add suspend handler Add a handler for suspend events. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index dd6fa81fa868..c6c25a460c9c 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -188,6 +188,7 @@ struct ibm_struct { int (*write) (char *); void (*exit) (void); void (*resume) (void); + void (*suspend) (pm_message_t state); struct list_head all_drivers; @@ -658,6 +659,21 @@ static struct input_dev *tpacpi_inputdev; static struct mutex tpacpi_inputdev_send_mutex; static LIST_HEAD(tpacpi_all_drivers); +static int tpacpi_suspend_handler(struct platform_device *pdev, + pm_message_t state) +{ + struct ibm_struct *ibm, *itmp; + + list_for_each_entry_safe(ibm, itmp, + &tpacpi_all_drivers, + all_drivers) { + if (ibm->suspend) + (ibm->suspend)(state); + } + + return 0; +} + static int tpacpi_resume_handler(struct platform_device *pdev) { struct ibm_struct *ibm, *itmp; @@ -677,6 +693,7 @@ static struct platform_driver tpacpi_pdriver = { .name = TPACPI_DRVR_NAME, .owner = THIS_MODULE, }, + .suspend = tpacpi_suspend_handler, .resume = tpacpi_resume_handler, }; From 3b64b51d20d9b633bb2efe63af785a49f8092898 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:51 -0200 Subject: [PATCH 045/112] ACPI: thinkpad-acpi: cleanup hotkey_notify and HKEY log messages Use a generic message on hotkey_notify to log unknown and unhandled events, and cleanup hotkey_notify a little. Also, document event 0x5010 (brightness changed notification) and do not log it as an unknown event (even if we do not use it for anything right now). Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 4 ++++ drivers/misc/thinkpad_acpi.c | 35 +++++++++++++++++++-------------- 2 files changed, 24 insertions(+), 15 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 7c7bd4720cfc..3fb864733ca1 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -475,6 +475,10 @@ Non hot-key ACPI HKEY event map: The above events are not propagated by the driver, except for legacy compatibility purposes when hotkey_report_mode is set to 1. +0x5010 Brightness level changed (newer Lenovo BIOSes) + +The above events are propagated by the driver. + Compatibility notes: ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index c6c25a460c9c..f5f306ae4413 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -2007,6 +2007,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) unsigned int scancode; int send_acpi_ev; int ignore_acpi_ev; + int unk_ev; if (event != 0x80) { printk(TPACPI_ERR @@ -2030,8 +2031,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) return; } - send_acpi_ev = 0; + send_acpi_ev = 1; ignore_acpi_ev = 0; + unk_ev = 0; switch (hkey >> 12) { case 1: @@ -2041,33 +2043,34 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) scancode--; if (!(hotkey_source_mask & (1 << scancode))) { tpacpi_input_send_key(scancode); + send_acpi_ev = 0; } else { ignore_acpi_ev = 1; } } else { - printk(TPACPI_ERR - "hotkey 0x%04x out of range " - "for keyboard map\n", hkey); - send_acpi_ev = 1; + unk_ev = 1; } break; case 5: - /* 0x5000-0x5FFF: LID */ - /* we don't handle it through this path, just - * eat up known LID events */ - if (hkey != 0x5001 && hkey != 0x5002) { - printk(TPACPI_ERR - "unknown LID-related HKEY event: " - "0x%04x\n", hkey); - send_acpi_ev = 1; - } else { + /* 0x5000-0x5FFF: On screen display helpers */ + switch (hkey) { + case 0x5010: + /* Lenovo Vista BIOS: brightness changed */ + break; + case 0x5001: + case 0x5002: + /* LID switch events. Do not propagate */ ignore_acpi_ev = 1; + break; + default: + unk_ev = 1; } break; case 7: /* 0x7000-0x7FFF: misc */ if (tp_features.hotkey_wlsw && hkey == 0x7000) { tpacpi_input_send_radiosw(); + send_acpi_ev = 0; break; } /* fallthrough to default */ @@ -2078,9 +2081,11 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* case 3: ultra-bay related. maybe bay in dock? */ /* 0x3003 - T43 after wake up by bay lever * eject (0x2305) */ + unk_ev = 1; + } + if (unk_ev) { printk(TPACPI_NOTICE "unhandled HKEY event 0x%04x\n", hkey); - send_acpi_ev = 1; } /* Legacy events */ From a713b4d7bca51e56cdb5357507f46674111d032c Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:52 -0200 Subject: [PATCH 046/112] ACPI: thinkpad-acpi: wakeup on hotunplug reporting Handle some HKEY events that the firmware uses to report the reason for a wake up, and to also notify that the system could go back to sleep (if it woke up just to eject something from the bay, or to undock). The driver will report the reason of the last wake up in the sysfs attribute "wakeup_reason": 0 for "none, unknown, or standard ACPI wake up event", 1 for "bay ejection request" and 2 for "undock request". The firmware will also report if the operation that triggered the wake up has been completed, by issuing an HKEY 0x3003 or 0x4003 event. If the operation fails, no event is sent. When such a hotunplug sucessfull notification is issued, the driver sets the attribute "wakeup_hotunplug_complete" to 1. While the firmware does tell us whether we are waking from a suspend or hibernation scenario, the Linux way of hibernating makes this information not reliable, and therefore it is not reported. The idea is that if any of these attributes are non-zero, userspace might want to do something at the end of the "wake up from sleep" procedures, such as offering to send the machine back into sleep as soon as it is safe to do so. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 24 +++++++++ drivers/misc/thinkpad_acpi.c | 91 ++++++++++++++++++++++++++++++--- 2 files changed, 108 insertions(+), 7 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 3fb864733ca1..9d08e472ef74 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -325,6 +325,21 @@ sysfs notes: May return -EPERM (write access locked out by module parameter) or -EACCES (read-only). + wakeup_reason: + Set to 1 if the system is waking up because the user + requested a bay ejection. Set to 2 if the system is + waking up because the user requested the system to + undock. Set to zero for normal wake-ups or wake-ups + due to unknown reasons. + + wakeup_hotunplug_complete: + Set to 1 if the system was waken up because of an + undock or bay ejection request, and that request + was sucessfully completed. At this point, it might + be useful to send the system back to sleep, at the + user's choice. Refer to HKEY events 0x4003 and + 0x3003, below. + input layer notes: A Hot key is mapped to a single input layer EV_KEY event, possibly @@ -475,6 +490,15 @@ Non hot-key ACPI HKEY event map: The above events are not propagated by the driver, except for legacy compatibility purposes when hotkey_report_mode is set to 1. +0x2304 System is waking up from suspend to undock +0x2305 System is waking up from suspend to eject bay +0x2404 System is waking up from hibernation to undock +0x2405 System is waking up from hibernation to eject bay + +The above events are never propagated by the driver. + +0x3003 Bay ejection (see 0x2x05) complete, can sleep again +0x4003 Undocked (see 0x2x04), can sleep again 0x5010 Brightness level changed (newer Lenovo BIOSes) The above events are propagated by the driver. diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index f5f306ae4413..9b0235dc5308 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1018,6 +1018,14 @@ static unsigned int hotkey_config_change; static struct mutex hotkey_mutex; +static enum { /* Reasons for waking up */ + TP_ACPI_WAKEUP_NONE = 0, /* None or unknown */ + TP_ACPI_WAKEUP_BAYEJ, /* Bay ejection request */ + TP_ACPI_WAKEUP_UNDOCK, /* Undock request */ +} hotkey_wakeup_reason; + +static int hotkey_autosleep_ack; + static int hotkey_orig_status; static u32 hotkey_orig_mask; static u32 hotkey_all_mask; @@ -1661,6 +1669,29 @@ static ssize_t hotkey_report_mode_show(struct device *dev, static struct device_attribute dev_attr_hotkey_report_mode = __ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL); +/* sysfs wakeup reason ------------------------------------------------- */ +static ssize_t hotkey_wakeup_reason_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_wakeup_reason); +} + +static struct device_attribute dev_attr_hotkey_wakeup_reason = + __ATTR(wakeup_reason, S_IRUGO, hotkey_wakeup_reason_show, NULL); + +/* sysfs wakeup hotunplug_complete ------------------------------------- */ +static ssize_t hotkey_wakeup_hotunplug_complete_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_autosleep_ack); +} + +static struct device_attribute dev_attr_hotkey_wakeup_hotunplug_complete = + __ATTR(wakeup_hotunplug_complete, S_IRUGO, + hotkey_wakeup_hotunplug_complete_show, NULL); + /* --------------------------------------------------------------------- */ static struct attribute *hotkey_attributes[] __initdata = { @@ -1683,6 +1714,8 @@ static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_all_mask.attr, &dev_attr_hotkey_recommended_mask.attr, #endif + &dev_attr_hotkey_wakeup_reason.attr, + &dev_attr_hotkey_wakeup_hotunplug_complete.attr, }; static int __init hotkey_init(struct ibm_init_struct *iibm) @@ -1822,7 +1855,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(10, NULL); + hotkey_dev_attributes = create_attr_set(12, NULL); if (!hotkey_dev_attributes) return -ENOMEM; res = add_many_to_attr_set(hotkey_dev_attributes, @@ -2051,6 +2084,48 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) unk_ev = 1; } break; + case 2: + /* Wakeup reason */ + switch (hkey) { + case 0x2304: /* suspend, undock */ + case 0x2404: /* hibernation, undock */ + hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK; + ignore_acpi_ev = 1; + break; + case 0x2305: /* suspend, bay eject */ + case 0x2405: /* hibernation, bay eject */ + hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ; + ignore_acpi_ev = 1; + break; + default: + unk_ev = 1; + } + if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) { + printk(TPACPI_INFO + "woke up due to a hot-unplug " + "request...\n"); + } + break; + case 3: + /* bay-related wakeups */ + if (hkey == 0x3003) { + hotkey_autosleep_ack = 1; + printk(TPACPI_INFO + "bay ejected\n"); + } else { + unk_ev = 1; + } + break; + case 4: + /* dock-related wakeups */ + if (hkey == 0x4003) { + hotkey_autosleep_ack = 1; + printk(TPACPI_INFO + "undocked\n"); + } else { + unk_ev = 1; + } + break; case 5: /* 0x5000-0x5FFF: On screen display helpers */ switch (hkey) { @@ -2075,12 +2150,6 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } /* fallthrough to default */ default: - /* case 2: dock-related */ - /* 0x2305 - T43 waking up due to bay lever - * eject while aslept */ - /* case 3: ultra-bay related. maybe bay in dock? */ - /* 0x3003 - T43 after wake up by bay lever - * eject (0x2305) */ unk_ev = 1; } if (unk_ev) { @@ -2105,6 +2174,13 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } } +static void hotkey_suspend(pm_message_t state) +{ + /* Do these on suspend, we get the events on early resume! */ + hotkey_wakeup_reason = TP_ACPI_WAKEUP_NONE; + hotkey_autosleep_ack = 0; +} + static void hotkey_resume(void) { if (hotkey_mask_get()) @@ -2212,6 +2288,7 @@ static struct ibm_struct hotkey_driver_data = { .write = hotkey_write, .exit = hotkey_exit, .resume = hotkey_resume, + .suspend = hotkey_suspend, .acpi = &ibm_hotkey_acpidriver, }; From d1edb2b5f1d016d679600cccf2716e0134fff917 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:53 -0200 Subject: [PATCH 047/112] ACPI: thinkpad-acpi: add X61t HKEY events Tomas Carnecky reports that events 0x5009 and 0x500a are swivel events, and that 0x500b/0x500c are tablet pen storage bay events. Document these events, and avoid nasty messages when they happen. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 4 ++++ drivers/misc/thinkpad_acpi.c | 9 ++++++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 9d08e472ef74..e1c4550dac99 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -499,6 +499,10 @@ The above events are never propagated by the driver. 0x3003 Bay ejection (see 0x2x05) complete, can sleep again 0x4003 Undocked (see 0x2x04), can sleep again +0x5009 Tablet swivel: switched to tablet mode +0x500A Tablet swivel: switched to normal mode +0x500B Tablet pen insterted into its storage bay +0x500C Tablet pen removed from its storage bay 0x5010 Brightness level changed (newer Lenovo BIOSes) The above events are propagated by the driver. diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 9b0235dc5308..049ec42c77be 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -2127,10 +2127,13 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } break; case 5: - /* 0x5000-0x5FFF: On screen display helpers */ + /* 0x5000-0x5FFF: human interface helpers */ switch (hkey) { - case 0x5010: - /* Lenovo Vista BIOS: brightness changed */ + case 0x5010: /* Lenovo new BIOS: brightness changed */ + case 0x5009: /* X61t: swivel up (tablet mode) */ + case 0x500a: /* X61t: swivel down (normal mode) */ + case 0x500b: /* X61t: tablet pen inserted into bay */ + case 0x500c: /* X61t: tablet pen removed from bay */ break; case 0x5001: case 0x5002: From 013c40e457ac573b29daa0e369c2ba6729c23557 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:54 -0200 Subject: [PATCH 048/112] ACPI: thinkpad-acpi: silence _sta warning When both CONFIG_THINKPAD_ACPI_DOCK and CONFIG_THINKPAD_ACPI_BAY are undefined, _sta is not used and that causes a gcc warning. Fix it (and I think this is a regression, I am pretty sure I fixed this once before, sorry about that). Issue reported by: Pritt Laes. Signed-off-by: Henrique de Moraes Holschuh Cc: Pritt Laes Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 049ec42c77be..e18f1e18781f 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -414,6 +414,7 @@ static int acpi_ec_write(int i, u8 v) return 1; } +#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY) static int _sta(acpi_handle handle) { int status; @@ -423,6 +424,7 @@ static int _sta(acpi_handle handle) return status; } +#endif static int issue_thinkpad_cmos_command(int cmos_cmd) { From 50ebec09f1a79df27afeceb14a3059944f327e1d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:55 -0200 Subject: [PATCH 049/112] ACPI: thinkpad-acpi: add poll() support to some sysfs attributes Implement poll()/select() support through sysfs_notify() for some key attributes which userspace might want to poll() or select() on. In order to let userspace know poll()/select() support is available for an attribute, the thinkpad-acpi sysfs interface version is also bumped up. Further changes that add poll()/select() capabilities to any pre-existing attributes will also increment the sysfs interface version. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 9 +++++++++ drivers/misc/thinkpad_acpi.c | 36 +++++++++++++++++++++++++++++---- 2 files changed, 41 insertions(+), 4 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index e1c4550dac99..9bbd0f541437 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -311,6 +311,8 @@ sysfs notes: disabled" postition, and 1 if the switch is in the "radios enabled" position. + This attribute has poll()/select() support. + hotkey_report_mode: Returns the state of the procfs ACPI event report mode filter for hot keys. If it is set to 1 (the default), @@ -332,6 +334,8 @@ sysfs notes: undock. Set to zero for normal wake-ups or wake-ups due to unknown reasons. + This attribute has poll()/select() support. + wakeup_hotunplug_complete: Set to 1 if the system was waken up because of an undock or bay ejection request, and that request @@ -340,6 +344,8 @@ sysfs notes: user's choice. Refer to HKEY events 0x4003 and 0x3003, below. + This attribute has poll()/select() support. + input layer notes: A Hot key is mapped to a single input layer EV_KEY event, possibly @@ -1354,3 +1360,6 @@ Sysfs interface changelog: NVRAM polling patch). Some development snapshots of 0.18 had an earlier version that did strange things to hotkey_mask. + +0x020200: Add poll()/select() support to the following attributes: + hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index e18f1e18781f..91bda316a51c 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -22,7 +22,7 @@ */ #define TPACPI_VERSION "0.18" -#define TPACPI_SYSFS_VERSION 0x020101 +#define TPACPI_SYSFS_VERSION 0x020200 /* * Changelog: @@ -1643,7 +1643,7 @@ static struct device_attribute dev_attr_hotkey_poll_freq = #endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */ -/* sysfs hotkey radio_sw ----------------------------------------------- */ +/* sysfs hotkey radio_sw (pollable) ------------------------------------ */ static ssize_t hotkey_radio_sw_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1659,6 +1659,13 @@ static ssize_t hotkey_radio_sw_show(struct device *dev, static struct device_attribute dev_attr_hotkey_radio_sw = __ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL); +static void hotkey_radio_sw_notify_change(void) +{ + if (tp_features.hotkey_wlsw) + sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, + "hotkey_radio_sw"); +} + /* sysfs hotkey report_mode -------------------------------------------- */ static ssize_t hotkey_report_mode_show(struct device *dev, struct device_attribute *attr, @@ -1671,7 +1678,7 @@ static ssize_t hotkey_report_mode_show(struct device *dev, static struct device_attribute dev_attr_hotkey_report_mode = __ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL); -/* sysfs wakeup reason ------------------------------------------------- */ +/* sysfs wakeup reason (pollable) -------------------------------------- */ static ssize_t hotkey_wakeup_reason_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1682,7 +1689,14 @@ static ssize_t hotkey_wakeup_reason_show(struct device *dev, static struct device_attribute dev_attr_hotkey_wakeup_reason = __ATTR(wakeup_reason, S_IRUGO, hotkey_wakeup_reason_show, NULL); -/* sysfs wakeup hotunplug_complete ------------------------------------- */ +void hotkey_wakeup_reason_notify_change(void) +{ + if (tp_features.hotkey_mask) + sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, + "wakeup_reason"); +} + +/* sysfs wakeup hotunplug_complete (pollable) -------------------------- */ static ssize_t hotkey_wakeup_hotunplug_complete_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1694,6 +1708,13 @@ static struct device_attribute dev_attr_hotkey_wakeup_hotunplug_complete = __ATTR(wakeup_hotunplug_complete, S_IRUGO, hotkey_wakeup_hotunplug_complete_show, NULL); +void hotkey_wakeup_hotunplug_complete_notify_change(void) +{ + if (tp_features.hotkey_mask) + sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, + "wakeup_hotunplug_complete"); +} + /* --------------------------------------------------------------------- */ static struct attribute *hotkey_attributes[] __initdata = { @@ -2106,6 +2127,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) printk(TPACPI_INFO "woke up due to a hot-unplug " "request...\n"); + hotkey_wakeup_reason_notify_change(); } break; case 3: @@ -2114,6 +2136,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) hotkey_autosleep_ack = 1; printk(TPACPI_INFO "bay ejected\n"); + hotkey_wakeup_hotunplug_complete_notify_change(); } else { unk_ev = 1; } @@ -2124,6 +2147,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) hotkey_autosleep_ack = 1; printk(TPACPI_INFO "undocked\n"); + hotkey_wakeup_hotunplug_complete_notify_change(); } else { unk_ev = 1; } @@ -2150,6 +2174,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* 0x7000-0x7FFF: misc */ if (tp_features.hotkey_wlsw && hkey == 0x7000) { tpacpi_input_send_radiosw(); + hotkey_radio_sw_notify_change(); send_acpi_ev = 0; break; } @@ -2193,6 +2218,9 @@ static void hotkey_resume(void) "error while trying to read hot key mask " "from firmware\n"); tpacpi_input_send_radiosw(); + hotkey_radio_sw_notify_change(); + hotkey_wakeup_reason_notify_change(); + hotkey_wakeup_hotunplug_complete_notify_change(); #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL hotkey_poll_setup_safe(0); #endif From 6a2e293c34a41446c091cb18758cf64117021b72 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:56 -0200 Subject: [PATCH 050/112] ACPI: thinkpad-acpi: update copyright dates to 2008 Update the copyright headers to include 2008. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 91bda316a51c..05f5329c822e 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3,7 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov - * Copyright (C) 2006-2007 Henrique de Moraes Holschuh + * Copyright (C) 2006-2008 Henrique de Moraes Holschuh * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by From 1cee5cce9776d88778b6c00e3f72fffbcbec40d4 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 8 Jan 2008 13:02:57 -0200 Subject: [PATCH 051/112] ACPI: thinkpad-acpi: bump up version to 0.19 The major code reorganization and cleanups, and new HKEY events, plus poll()/select() support are good reasons to checkpoint a new version... Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 4 ++-- drivers/misc/thinkpad_acpi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index 9bbd0f541437..6c2477754a2a 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.18 - October 08th, 2007 + Version 0.19 + January 06th, 2008 Borislav Deianov Henrique de Moraes Holschuh diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 05f5329c822e..8ef0afc88693 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define TPACPI_VERSION "0.18" +#define TPACPI_VERSION "0.19" #define TPACPI_SYSFS_VERSION 0x020200 /* From 38531e6fe51ad5c7dfe72e0e066b5f54bc1921cd Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 26 Dec 2007 02:03:26 +0000 Subject: [PATCH 052/112] ACPI: video: Rationalise ACPI backlight implementation The sysfs backlight class provides no mechanism for querying the acceptable brightness for a backlight. The ACPI spec states that values are only valid if they are reported as available by the firmware. Since we can't provide that information to userspace, instead collapse the range to the number of actual values that can be set. http://bugzilla.kernel.org/show_bug.cgi?id=9277 Signed-off-by: Matthew Garrett Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bd77e81e81c1..59639c9c6666 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -292,18 +292,26 @@ static int acpi_video_device_set_state(struct acpi_video_device *device, int sta static int acpi_video_get_brightness(struct backlight_device *bd) { unsigned long cur_level; + int i; struct acpi_video_device *vd = (struct acpi_video_device *)bl_get_data(bd); acpi_video_device_lcd_get_level_current(vd, &cur_level); - return (int) cur_level; + for (i = 2; i < vd->brightness->count; i++) { + if (vd->brightness->levels[i] == cur_level) + /* The first two entries are special - see page 575 + of the ACPI spec 3.0 */ + return i-2; + } + return 0; } static int acpi_video_set_brightness(struct backlight_device *bd) { - int request_level = bd->props.brightness; + int request_level = bd->props.brightness+2; struct acpi_video_device *vd = (struct acpi_video_device *)bl_get_data(bd); - acpi_video_device_lcd_set_level(vd, request_level); + acpi_video_device_lcd_set_level(vd, + vd->brightness->levels[request_level]); return 0; } @@ -652,7 +660,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) kfree(obj); if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ - unsigned long tmp; static int count = 0; char *name; name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); @@ -660,11 +667,10 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) return; sprintf(name, "acpi_video%d", count++); - acpi_video_device_lcd_get_level_current(device, &tmp); device->backlight = backlight_device_register(name, NULL, device, &acpi_backlight_ops); - device->backlight->props.max_brightness = max_level; - device->backlight->props.brightness = (int)tmp; + device->backlight->props.max_brightness = device->brightness->count-3; + device->backlight->props.brightness = acpi_video_get_brightness(device->backlight); backlight_update_status(device->backlight); kfree(name); From 203d3d4aa482339b4816f131f713e1b8ee37f6dd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:08 +0800 Subject: [PATCH 053/112] the generic thermal sysfs driver The Generic Thermal sysfs driver for thermal management. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 246 ++++++++++ drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/thermal/Kconfig | 15 + drivers/thermal/Makefile | 5 + drivers/thermal/thermal.c | 714 ++++++++++++++++++++++++++++ include/linux/thermal.h | 90 ++++ 7 files changed, 1073 insertions(+) create mode 100644 Documentation/thermal/sysfs-api.txt create mode 100644 drivers/thermal/Kconfig create mode 100644 drivers/thermal/Makefile create mode 100644 drivers/thermal/thermal.c create mode 100644 include/linux/thermal.h diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt new file mode 100644 index 000000000000..5776e090359d --- /dev/null +++ b/Documentation/thermal/sysfs-api.txt @@ -0,0 +1,246 @@ +Generic Thermal Sysfs driver How To +========================= + +Written by Sujith Thomas , Zhang Rui + +Updated: 2 January 2008 + +Copyright (c) 2008 Intel Corporation + + +0. Introduction + +The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors) +and thermal cooling devices (fan, processor...) to register with the thermal management +solution and to be a part of it. + +This how-to focusses on enabling new thermal zone and cooling devices to participate +in thermal management. +This solution is platform independent and any type of thermal zone devices and +cooling devices should be able to make use of the infrastructure. + +The main task of the thermal sysfs driver is to expose thermal zone attributes as well +as cooling device attributes to the user space. +An intelligent thermal management application can make decisions based on inputs +from thermal zone attributes (the current temperature and trip point temperature) +and throttle appropriate devices. + +[0-*] denotes any positive number starting from 0 +[1-*] denotes any positive number starting from 1 + +1. thermal sysfs driver interface functions + +1.1 thermal zone device interface +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips, + void *devdata, struct thermal_zone_device_ops *ops) + + This interface function adds a new thermal zone device (sensor) to + /sys/class/thermal folder as thermal_zone[0-*]. + It tries to bind all the thermal cooling devices registered at the same time. + + name: the thermal zone name. + trips: the total number of trip points this thermal zone supports. + devdata: device private data + ops: thermal zone device callbacks. + .bind: bind the thermal zone device with a thermal cooling device. + .unbind: unbing the thermal zone device with a thermal cooling device. + .get_temp: get the current temperature of the thermal zone. + .get_mode: get the current mode (user/kernel) of the thermal zone. + "kernel" means thermal management is done in kernel. + "user" will prevent kernel thermal driver actions upon trip points + so that user applications can take charge of thermal management. + .set_mode: set the mode (user/kernel) of the thermal zone. + .get_trip_type: get the type of certain trip point. + .get_trip_temp: get the temperature above which the certain trip point + will be fired. + +1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) + + This interface function removes the thermal zone device. + It deletes the corresponding entry form /sys/class/thermal folder and unbind all + the thermal cooling devices it uses. + +1.2 thermal cooling device interface +1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, + void *devdata, struct thermal_cooling_device_ops *) + + This interface function adds a new thermal cooling device (fan/processor/...) to + /sys/class/thermal/ folder as cooling_device[0-*]. + It tries to bind itself to all the thermal zone devices register at the same time. + name: the cooling device name. + devdata: device private data. + ops: thermal cooling devices callbacks. + .get_max_state: get the Maximum throttle state of the cooling device. + .get_cur_state: get the Current throttle state of the cooling device. + .set_cur_state: set the Current throttle state of the cooling device. + +1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) + + This interface function remove the thermal cooling device. + It deletes the corresponding entry form /sys/class/thermal folder and unbind + itself from all the thermal zone devices using it. + +1.3 interface for binding a thermal zone device with a thermal cooling device +1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, + int trip, struct thermal_cooling_device *cdev); + + This interface function bind a thermal cooling device to the certain trip point + of a thermal zone device. + This function is usually called in the thermal zone device .bind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. + +1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, + int trip, struct thermal_cooling_device *cdev); + + This interface function unbind a thermal cooling device from the certain trip point + of a thermal zone device. + This function is usually called in the thermal zone device .unbind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. + +2. sysfs attributes structure + +RO read only value +RW read/write value + +All thermal sysfs attributes will be represented under /sys/class/thermal +/sys/class/thermal/ + +Thermal zone device sys I/F, created once it's registered: +|thermal_zone[0-*]: + |-----type: Type of the thermal zone + |-----temp: Current temperature + |-----mode: Working mode of the thermal zone + |-----trip_point_[0-*]_temp: Trip point temperature + |-----trip_point_[0-*]_type: Trip point type + +Thermal cooling device sys I/F, created once it's registered: +|cooling_device[0-*]: + |-----type : Type of the cooling device(processor/fan/...) + |-----max_state: Maximum cooling state of the cooling device + |-----cur_state: Current cooling state of the cooling device + + +These two dynamic attributes are created/removed in pairs. +They represent the relationship between a thermal zone and its associated cooling device. +They are created/removed for each +thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful exection. + +|thermal_zone[0-*] + |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone + |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with + + +*************************** +* Thermal zone attributes * +*************************** + +type Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + Eg: "ACPI thermal zone" indicates it's a ACPI thermal device + RO + Optional + +temp Current temperature as reported by thermal zone (sensor) + Unit: degree celsius + RO + Required + +mode One of the predifned values in [kernel, user] + This file gives information about the algorithm + that is currently managing the thermal zone. + It can be either default kernel based algorithm + or user space application. + RW + Optional + kernel = Thermal management in kernel thermal zone driver. + user = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + +trip_point_[0-*]_temp The temperature above which trip point will be fired + Unit: degree celsius + RO + Optional + +trip_point_[0-*]_type Strings which indicate the type of the trip point + Eg. it can be one of critical, hot, passive, + active[0-*] for ACPI thermal zone. + RO + Optional + +cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + RO + Optional + +cdev[0-*]_trip_point The trip point with which cdev[0-*] is assocated in this thermal zone + -1 means the cooling device is not associated with any trip point. + RO + Optional + +****************************** +* Cooling device attributes * +****************************** + +type String which represents the type of device + eg: For generic ACPI: this should be "Fan", + "Processor" or "LCD" + eg. For memory controller device on intel_menlow platform: + this should be "Memory controller" + RO + Optional + +max_state The maximum permissible cooling state of this cooling device. + RO + Required + +cur_state The current cooling state of this cooling device. + the value can any integer numbers between 0 and max_state, + cur_state == 0 means no cooling + cur_state == max_state means the maximum cooling. + RW + Required + +3. A simple implementation + +ACPI thermal zone may support multiple trip points like critical/hot/passive/active. +If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, +it may register itself as a thermale_zone_device (thermal_zone1) with 4 trip points in all. +It has one processor and one fan, which are both registered as thermal_cooling_device. +If the processor is listed in _PSL method, and the fan is listed in _AL0 method, +the sys I/F structure will be built like this: + +/sys/class/thermal: + +|thermal_zone1: + |-----type: ACPI thermal zone + |-----temp: 37 + |-----mode: kernel + |-----trip_point_0_temp: 100 + |-----trip_point_0_type: critical + |-----trip_point_1_temp: 80 + |-----trip_point_1_type: passive + |-----trip_point_2_temp: 70 + |-----trip_point_2_type: active[0] + |-----trip_point_3_temp: 60 + |-----trip_point_3_type: active[1] + |-----cdev0: --->/sys/class/thermal/cooling_device0 + |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |-----cdev1: --->/sys/class/thermal/cooling_device3 + |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + +|cooling_device0: + |-----type: Processor + |-----max_state: 8 + |-----cur_state: 0 + +|cooling_device3: + |-----type: Fan + |-----max_state: 2 + |-----cur_state: 0 diff --git a/drivers/Kconfig b/drivers/Kconfig index 08d4ae201597..8e238cfc0795 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -58,6 +58,8 @@ source "drivers/power/Kconfig" source "drivers/hwmon/Kconfig" +source "drivers/thermal/Kconfig" + source "drivers/watchdog/Kconfig" source "drivers/ssb/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 0ee9a8a4095e..a516b8b19127 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -64,6 +64,7 @@ obj-y += i2c/ obj-$(CONFIG_W1) += w1/ obj-$(CONFIG_POWER_SUPPLY) += power/ obj-$(CONFIG_HWMON) += hwmon/ +obj-$(CONFIG_THERMAL) += thermal/ obj-$(CONFIG_WATCHDOG) += watchdog/ obj-$(CONFIG_PHONE) += telephony/ obj-$(CONFIG_MD) += md/ diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig new file mode 100644 index 000000000000..9b3f61200000 --- /dev/null +++ b/drivers/thermal/Kconfig @@ -0,0 +1,15 @@ +# +# Generic thermal sysfs drivers configuration +# + +menuconfig THERMAL + bool "Generic Thermal sysfs driver" + default y + help + Generic Thermal Sysfs driver offers a generic mechanism for + thermal management. Usually it's made up of one or more thermal + zone and cooling device. + each thermal zone contains its own temperature, trip points, + cooling devices. + All platforms with ACPI thermal support can use this driver. + If you want this support, you should say Y here diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile new file mode 100644 index 000000000000..8ef1232de376 --- /dev/null +++ b/drivers/thermal/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for sensor chip drivers. +# + +obj-$(CONFIG_THERMAL) += thermal.o diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c new file mode 100644 index 000000000000..3273e348fd14 --- /dev/null +++ b/drivers/thermal/thermal.c @@ -0,0 +1,714 @@ +/* + * thermal.c - Generic Thermal Management Sysfs support. + * + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui + * Copyright (C) 2008 Sujith Thomas + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Zhang Rui") +MODULE_DESCRIPTION("Generic thermal management sysfs support"); +MODULE_LICENSE("GPL"); + +#define PREFIX "Thermal: " + +struct thermal_cooling_device_instance { + int id; + char name[THERMAL_NAME_LENGTH]; + struct thermal_zone_device *tz; + struct thermal_cooling_device *cdev; + int trip; + char attr_name[THERMAL_NAME_LENGTH]; + struct device_attribute attr; + struct list_head node; +}; + +static DEFINE_IDR(thermal_tz_idr); +static DEFINE_IDR(thermal_cdev_idr); +static DEFINE_MUTEX(thermal_idr_lock); + +static LIST_HEAD(thermal_tz_list); +static LIST_HEAD(thermal_cdev_list); +static DEFINE_MUTEX(thermal_list_lock); + +static int get_idr(struct idr *idr, struct mutex *lock, int *id) +{ + int err; + + again: + if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0)) + return -ENOMEM; + + if (lock) + mutex_lock(lock); + err = idr_get_new(idr, NULL, id); + if (lock) + mutex_unlock(lock); + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return err; + + *id = *id & MAX_ID_MASK; + return 0; +} + +static void release_idr(struct idr *idr, struct mutex *lock, int id) +{ + if (lock) + mutex_lock(lock); + idr_remove(idr, id); + if (lock) + mutex_unlock(lock); +} + +/* sys I/F for thermal zone */ + +#define to_thermal_zone(_dev) \ + container_of(_dev, struct thermal_zone_device, device) + +static ssize_t +type_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + return sprintf(buf, "%s\n", tz->type); +} + +static ssize_t +temp_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + if (!tz->ops->get_temp) + return -EPERM; + + return tz->ops->get_temp(tz, buf); +} + +static ssize_t +mode_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + if (!tz->ops->get_mode) + return -EPERM; + + return tz->ops->get_mode(tz, buf); +} + +static ssize_t +mode_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int result; + + if (!tz->ops->set_mode) + return -EPERM; + + result = tz->ops->set_mode(tz, buf); + if (result) + return result; + + return count; +} + +static ssize_t +trip_point_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip; + + if (!tz->ops->get_trip_type) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) + return -EINVAL; + + return tz->ops->get_trip_type(tz, trip, buf); +} + +static ssize_t +trip_point_temp_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip; + + if (!tz->ops->get_trip_temp) + return -EPERM; + + if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) + return -EINVAL; + + return tz->ops->get_trip_temp(tz, trip, buf); +} + +static DEVICE_ATTR(type, 0444, type_show, NULL); +static DEVICE_ATTR(temp, 0444, temp_show, NULL); +static DEVICE_ATTR(mode, 0644, mode_show, mode_store); + +static struct device_attribute trip_point_attrs[] = { + __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL), +}; + +#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ +do { \ + result = device_create_file(_dev, \ + &trip_point_attrs[_index * 2]); \ + if (result) \ + break; \ + result = device_create_file(_dev, \ + &trip_point_attrs[_index * 2 + 1]); \ +} while (0) + +#define TRIP_POINT_ATTR_REMOVE(_dev, _index) \ +do { \ + device_remove_file(_dev, &trip_point_attrs[_index * 2]); \ + device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \ +} while (0) + +/* sys I/F for cooling device */ +#define to_cooling_device(_dev) \ + container_of(_dev, struct thermal_cooling_device, device) + +static ssize_t +thermal_cooling_device_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + + return sprintf(buf, "%s\n", cdev->type); +} + +static ssize_t +thermal_cooling_device_max_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + + return cdev->ops->get_max_state(cdev, buf); +} + +static ssize_t +thermal_cooling_device_cur_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + + return cdev->ops->get_cur_state(cdev, buf); +} + +static ssize_t +thermal_cooling_device_cur_state_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + int state; + int result; + + if (!sscanf(buf, "%d\n", &state)) + return -EINVAL; + + if (state < 0) + return -EINVAL; + + result = cdev->ops->set_cur_state(cdev, state); + if (result) + return result; + return count; +} + +static struct device_attribute dev_attr_cdev_type = + __ATTR(type, 0444, thermal_cooling_device_type_show, NULL); +static DEVICE_ATTR(max_state, 0444, + thermal_cooling_device_max_state_show, NULL); +static DEVICE_ATTR(cur_state, 0644, + thermal_cooling_device_cur_state_show, + thermal_cooling_device_cur_state_store); + +static ssize_t +thermal_cooling_device_trip_point_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device_instance *instance; + + instance = + container_of(attr, struct thermal_cooling_device_instance, attr); + + if (instance->trip == THERMAL_TRIPS_NONE) + return sprintf(buf, "-1\n"); + else + return sprintf(buf, "%d\n", instance->trip); +} + +/* Device management */ + +/** + * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone + * this function is usually called in the thermal zone device .bind callback. + * @tz: thermal zone device + * @trip: indicates which trip point the cooling devices is + * associated with in this thermal zone. + * @cdev: thermal cooling device + */ +int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, + int trip, + struct thermal_cooling_device *cdev) +{ + struct thermal_cooling_device_instance *dev; + struct thermal_cooling_device_instance *pos; + int result; + + if (trip >= tz->trips || + (trip < 0 && trip != THERMAL_TRIPS_NONE)) + return -EINVAL; + + if (!tz || !cdev) + return -EINVAL; + + dev = + kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->tz = tz; + dev->cdev = cdev; + dev->trip = trip; + result = get_idr(&tz->idr, &tz->lock, &dev->id); + if (result) + goto free_mem; + + sprintf(dev->name, "cdev%d", dev->id); + result = + sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name); + if (result) + goto release_idr; + + sprintf(dev->attr_name, "cdev%d_trip_point", dev->id); + dev->attr.attr.name = dev->attr_name; + dev->attr.attr.mode = 0444; + dev->attr.show = thermal_cooling_device_trip_point_show; + result = device_create_file(&tz->device, &dev->attr); + if (result) + goto remove_symbol_link; + + mutex_lock(&tz->lock); + list_for_each_entry(pos, &tz->cooling_devices, node) + if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { + result = -EEXIST; + break; + } + if (!result) + list_add_tail(&dev->node, &tz->cooling_devices); + mutex_unlock(&tz->lock); + + if (!result) + return 0; + + device_remove_file(&tz->device, &dev->attr); + remove_symbol_link: + sysfs_remove_link(&tz->device.kobj, dev->name); + release_idr: + release_idr(&tz->idr, &tz->lock, dev->id); + free_mem: + kfree(dev); + return result; +} +EXPORT_SYMBOL(thermal_zone_bind_cooling_device); + +/** + * thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone + * this function is usually called in the thermal zone device .unbind callback. + * @tz: thermal zone device + * @trip: indicates which trip point the cooling devices is + * associated with in this thermal zone. + * @cdev: thermal cooling device + */ +int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, + int trip, + struct thermal_cooling_device *cdev) +{ + struct thermal_cooling_device_instance *pos, *next; + + mutex_lock(&tz->lock); + list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) { + if (pos->tz == tz && pos->trip == trip + && pos->cdev == cdev) { + list_del(&pos->node); + mutex_unlock(&tz->lock); + goto unbind; + } + } + mutex_unlock(&tz->lock); + + return -ENODEV; + + unbind: + device_remove_file(&tz->device, &pos->attr); + sysfs_remove_link(&tz->device.kobj, pos->name); + release_idr(&tz->idr, &tz->lock, pos->id); + kfree(pos); + return 0; +} +EXPORT_SYMBOL(thermal_zone_unbind_cooling_device); + +static void thermal_release(struct device *dev) +{ + struct thermal_zone_device *tz; + struct thermal_cooling_device *cdev; + + if (!strncmp(dev->bus_id, "thermal_zone", sizeof "thermal_zone" - 1)) { + tz = to_thermal_zone(dev); + kfree(tz); + } else { + cdev = to_cooling_device(dev); + kfree(cdev); + } +} + +static struct class thermal_class = { + .name = "thermal", + .dev_release = thermal_release, +}; + +/** + * thermal_cooling_device_register - register a new thermal cooling device + * @type: the thermal cooling device type. + * @devdata: device private data. + * @ops: standard thermal cooling devices callbacks. + */ +struct thermal_cooling_device *thermal_cooling_device_register(char *type, + void *devdata, struct thermal_cooling_device_ops *ops) +{ + struct thermal_cooling_device *cdev; + struct thermal_zone_device *pos; + int result; + + if (strlen(type) >= THERMAL_NAME_LENGTH) + return NULL; + + if (!ops || !ops->get_max_state || !ops->get_cur_state || + !ops->set_cur_state) + return NULL; + + cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL); + if (!cdev) + return NULL; + + result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id); + if (result) { + kfree(cdev); + return NULL; + } + + strcpy(cdev->type, type); + cdev->ops = ops; + cdev->device.class = &thermal_class; + cdev->devdata = devdata; + sprintf(cdev->device.bus_id, "cooling_device%d", cdev->id); + result = device_register(&cdev->device); + if (result) { + release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); + kfree(cdev); + return NULL; + } + + /* sys I/F */ + if (type) { + result = device_create_file(&cdev->device, + &dev_attr_cdev_type); + if (result) + goto unregister; + } + + result = device_create_file(&cdev->device, &dev_attr_max_state); + if (result) + goto unregister; + + result = device_create_file(&cdev->device, &dev_attr_cur_state); + if (result) + goto unregister; + + mutex_lock(&thermal_list_lock); + list_add(&cdev->node, &thermal_cdev_list); + list_for_each_entry(pos, &thermal_tz_list, node) { + if (!pos->ops->bind) + continue; + result = pos->ops->bind(pos, cdev); + if (result) + break; + + } + mutex_unlock(&thermal_list_lock); + + if (!result) + return cdev; + + unregister: + release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); + device_unregister(&cdev->device); + return NULL; +} +EXPORT_SYMBOL(thermal_cooling_device_register); + +/** + * thermal_cooling_device_unregister - removes the registered thermal cooling device + * + * @cdev: the thermal cooling device to remove. + * + * thermal_cooling_device_unregister() must be called when the device is no + * longer needed. + */ +void thermal_cooling_device_unregister(struct + thermal_cooling_device + *cdev) +{ + struct thermal_zone_device *tz; + struct thermal_cooling_device *pos = NULL; + + if (!cdev) + return; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(pos, &thermal_cdev_list, node) + if (pos == cdev) + break; + if (pos != cdev) { + /* thermal cooling device not found */ + mutex_unlock(&thermal_list_lock); + return; + } + list_del(&cdev->node); + list_for_each_entry(tz, &thermal_tz_list, node) { + if (!tz->ops->unbind) + continue; + tz->ops->unbind(tz, cdev); + } + mutex_unlock(&thermal_list_lock); + if (cdev->type[0]) + device_remove_file(&cdev->device, + &dev_attr_cdev_type); + device_remove_file(&cdev->device, &dev_attr_max_state); + device_remove_file(&cdev->device, &dev_attr_cur_state); + + release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); + device_unregister(&cdev->device); + return; +} +EXPORT_SYMBOL(thermal_cooling_device_unregister); + +/** + * thermal_zone_device_register - register a new thermal zone device + * @type: the thermal zone device type + * @trips: the number of trip points the thermal zone support + * @devdata: private device data + * @ops: standard thermal zone device callbacks + * + * thermal_zone_device_unregister() must be called when the device is no + * longer needed. + */ +struct thermal_zone_device *thermal_zone_device_register(char *type, + int trips, void *devdata, + struct thermal_zone_device_ops *ops) +{ + struct thermal_zone_device *tz; + struct thermal_cooling_device *pos; + int result; + int count; + + if (strlen(type) >= THERMAL_NAME_LENGTH) + return NULL; + + if (trips > THERMAL_MAX_TRIPS || trips < 0) + return NULL; + + if (!ops || !ops->get_temp) + return NULL; + + tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL); + if (!tz) + return NULL; + + INIT_LIST_HEAD(&tz->cooling_devices); + idr_init(&tz->idr); + mutex_init(&tz->lock); + result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id); + if (result) { + kfree(tz); + return NULL; + } + + strcpy(tz->type, type); + tz->ops = ops; + tz->device.class = &thermal_class; + tz->devdata = devdata; + tz->trips = trips; + sprintf(tz->device.bus_id, "thermal_zone%d", tz->id); + result = device_register(&tz->device); + if (result) { + release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); + kfree(tz); + return NULL; + } + + /* sys I/F */ + if (type) { + result = device_create_file(&tz->device, &dev_attr_type); + if (result) + goto unregister; + } + + result = device_create_file(&tz->device, &dev_attr_temp); + if (result) + goto unregister; + + if (ops->get_mode) { + result = device_create_file(&tz->device, &dev_attr_mode); + if (result) + goto unregister; + } + + for (count = 0; count < trips; count++) { + TRIP_POINT_ATTR_ADD(&tz->device, count, result); + if (result) + goto unregister; + } + + mutex_lock(&thermal_list_lock); + list_add_tail(&tz->node, &thermal_tz_list); + if (ops->bind) + list_for_each_entry(pos, &thermal_cdev_list, node) { + result = ops->bind(tz, pos); + if (result) + break; + } + mutex_unlock(&thermal_list_lock); + + if (!result) + return tz; + + unregister: + release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); + device_unregister(&tz->device); + return NULL; +} +EXPORT_SYMBOL(thermal_zone_device_register); + +/** + * thermal_device_unregister - removes the registered thermal zone device + * + * @tz: the thermal zone device to remove + */ +void thermal_zone_device_unregister(struct thermal_zone_device *tz) +{ + struct thermal_cooling_device *cdev; + struct thermal_zone_device *pos = NULL; + int count; + + if (!tz) + return; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(pos, &thermal_tz_list, node) + if (pos == tz) + break; + if (pos != tz) { + /* thermal zone device not found */ + mutex_unlock(&thermal_list_lock); + return; + } + list_del(&tz->node); + if (tz->ops->unbind) + list_for_each_entry(cdev, &thermal_cdev_list, node) + tz->ops->unbind(tz, cdev); + mutex_unlock(&thermal_list_lock); + + if (tz->type[0]) + device_remove_file(&tz->device, &dev_attr_type); + device_remove_file(&tz->device, &dev_attr_temp); + if (tz->ops->get_mode) + device_remove_file(&tz->device, &dev_attr_mode); + + for (count = 0; count < tz->trips; count++) + TRIP_POINT_ATTR_REMOVE(&tz->device, count); + + release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); + idr_destroy(&tz->idr); + mutex_destroy(&tz->lock); + device_unregister(&tz->device); + return; +} +EXPORT_SYMBOL(thermal_zone_device_unregister); + +static int __init thermal_init(void) +{ + int result = 0; + + result = class_register(&thermal_class); + if (result) { + idr_destroy(&thermal_tz_idr); + idr_destroy(&thermal_cdev_idr); + mutex_destroy(&thermal_idr_lock); + mutex_destroy(&thermal_list_lock); + } + return result; +} + +static void __exit thermal_exit(void) +{ + class_unregister(&thermal_class); + idr_destroy(&thermal_tz_idr); + idr_destroy(&thermal_cdev_idr); + mutex_destroy(&thermal_idr_lock); + mutex_destroy(&thermal_list_lock); +} + +subsys_initcall(thermal_init); +module_exit(thermal_exit); diff --git a/include/linux/thermal.h b/include/linux/thermal.h new file mode 100644 index 000000000000..e4b76c7afb51 --- /dev/null +++ b/include/linux/thermal.h @@ -0,0 +1,90 @@ +/* + * thermal.h ($Revision: 0 $) + * + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui + * Copyright (C) 2008 Sujith Thomas + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#ifndef __THERMAL_H__ +#define __THERMAL_H__ + +#include +#include + +struct thermal_zone_device; +struct thermal_cooling_device; + +struct thermal_zone_device_ops { + int (*bind) (struct thermal_zone_device *, + struct thermal_cooling_device *); + int (*unbind) (struct thermal_zone_device *, + struct thermal_cooling_device *); + int (*get_temp) (struct thermal_zone_device *, char *); + int (*get_mode) (struct thermal_zone_device *, char *); + int (*set_mode) (struct thermal_zone_device *, const char *); + int (*get_trip_type) (struct thermal_zone_device *, int, char *); + int (*get_trip_temp) (struct thermal_zone_device *, int, char *); +}; + +struct thermal_cooling_device_ops { + int (*get_max_state) (struct thermal_cooling_device *, char *); + int (*get_cur_state) (struct thermal_cooling_device *, char *); + int (*set_cur_state) (struct thermal_cooling_device *, unsigned int); +}; + +#define THERMAL_TRIPS_NONE -1 +#define THERMAL_MAX_TRIPS 10 +#define THERMAL_NAME_LENGTH 20 +struct thermal_cooling_device { + int id; + char type[THERMAL_NAME_LENGTH]; + struct device device; + void *devdata; + struct thermal_cooling_device_ops *ops; + struct list_head node; +}; + +struct thermal_zone_device { + int id; + char type[THERMAL_NAME_LENGTH]; + struct device device; + void *devdata; + int trips; + struct thermal_zone_device_ops *ops; + struct list_head cooling_devices; + struct idr idr; + struct mutex lock; /* protect cooling devices list */ + struct list_head node; +}; + +struct thermal_zone_device *thermal_zone_device_register(char *, int, void *, + struct thermal_zone_device_ops *); +void thermal_zone_device_unregister(struct thermal_zone_device *); + +int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, + struct thermal_cooling_device *); +int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, + struct thermal_cooling_device *); + +struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, + struct thermal_cooling_device_ops *); +void thermal_cooling_device_unregister(struct thermal_cooling_device *); + +#endif /* __THERMAL_H__ */ From 3f655ef8c439e0775ffb7d1ead5d1d4f060e1f8b Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:11 +0800 Subject: [PATCH 054/112] ACPI: register ACPI thermal zone as generic thermal zone devices Register ACPI thermal zone as thermal zone device. the new sys I/F for ACPI thermal zone will be like this: /sys/class/thermal: |thermal_zone1: |-----type: "ACPI thermal zone". RO |-----temp: the current temperature. RO |-----mode: the current working mode. RW. the default value is "kernel" which means thermal management is done by ACPI thermal driver. "echo user > mode" prevents all the ACPI thermal driver actions upon any trip points. |-----trip_point_0_temp: the threshold of trip point 0. RO. |-----trip_point_0_type: "critical". RO. the type of trip point 0 This may be one of critical/hot/passive/active[x] for an ACPI thermal zone. ... |-----trip_point_3_temp: |-----trip_point_3_type: "active[1]" Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 1 + drivers/acpi/thermal.c | 301 +++++++++++++++++++++++++++++++++++++++-- 2 files changed, 292 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ccf6ea95f68c..558372957fd3 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -186,6 +186,7 @@ config ACPI_HOTPLUG_CPU config ACPI_THERMAL tristate "Thermal Zone" depends on ACPI_PROCESSOR + select THERMAL default y help This driver adds support for ACPI thermal zones. Most mobile and diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 5f79b4451212..c6cfce4c0122 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -43,7 +43,7 @@ #include #include #include - +#include #include #include @@ -195,6 +195,8 @@ struct acpi_thermal { struct acpi_thermal_trips trips; struct acpi_handle_list devices; struct timer_list timer; + struct thermal_zone_device *thermal_zone; + int tz_enabled; struct mutex lock; }; @@ -732,6 +734,9 @@ static void acpi_thermal_check(void *data) if (result) goto unlock; + if (!tz->tz_enabled) + goto unlock; + memset(&tz->state, 0, sizeof(tz->state)); /* @@ -825,6 +830,273 @@ static void acpi_thermal_check(void *data) mutex_unlock(&tz->lock); } +/* sys I/F for generic thermal sysfs support */ +static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf) +{ + struct acpi_thermal *tz = thermal->devdata; + + if (!tz) + return -EINVAL; + + return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(tz->temperature)); +} + +static const char enabled[] = "kernel"; +static const char disabled[] = "user"; +static int thermal_get_mode(struct thermal_zone_device *thermal, + char *buf) +{ + struct acpi_thermal *tz = thermal->devdata; + + if (!tz) + return -EINVAL; + + return sprintf(buf, "%s\n", tz->tz_enabled ? + enabled : disabled); +} + +static int thermal_set_mode(struct thermal_zone_device *thermal, + const char *buf) +{ + struct acpi_thermal *tz = thermal->devdata; + int enable; + + if (!tz) + return -EINVAL; + + /* + * enable/disable thermal management from ACPI thermal driver + */ + if (!strncmp(buf, enabled, sizeof enabled - 1)) + enable = 1; + else if (!strncmp(buf, disabled, sizeof disabled - 1)) + enable = 0; + else + return -EINVAL; + + if (enable != tz->tz_enabled) { + tz->tz_enabled = enable; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "%s ACPI thermal control\n", + tz->tz_enabled ? enabled : disabled)); + acpi_thermal_check(tz); + } + return 0; +} + +static int thermal_get_trip_type(struct thermal_zone_device *thermal, + int trip, char *buf) +{ + struct acpi_thermal *tz = thermal->devdata; + int i; + + if (!tz || trip < 0) + return -EINVAL; + + if (tz->trips.critical.flags.valid) { + if (!trip) + return sprintf(buf, "critical\n"); + trip--; + } + + if (tz->trips.hot.flags.valid) { + if (!trip) + return sprintf(buf, "hot\n"); + trip--; + } + + if (tz->trips.passive.flags.valid) { + if (!trip) + return sprintf(buf, "passive\n"); + trip--; + } + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && + tz->trips.active[i].flags.valid; i++) { + if (!trip) + return sprintf(buf, "active%d\n", i); + trip--; + } + + return -EINVAL; +} + +static int thermal_get_trip_temp(struct thermal_zone_device *thermal, + int trip, char *buf) +{ + struct acpi_thermal *tz = thermal->devdata; + int i; + + if (!tz || trip < 0) + return -EINVAL; + + if (tz->trips.critical.flags.valid) { + if (!trip) + return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS( + tz->trips.critical.temperature)); + trip--; + } + + if (tz->trips.hot.flags.valid) { + if (!trip) + return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS( + tz->trips.hot.temperature)); + trip--; + } + + if (tz->trips.passive.flags.valid) { + if (!trip) + return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS( + tz->trips.passive.temperature)); + trip--; + } + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && + tz->trips.active[i].flags.valid; i++) { + if (!trip) + return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS( + tz->trips.active[i].temperature)); + trip--; + } + + return -EINVAL; +} + +typedef int (*cb)(struct thermal_zone_device *, int, + struct thermal_cooling_device *); +static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev, + cb action) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_thermal *tz = thermal->devdata; + acpi_handle handle = device->handle; + int i; + int j; + int trip = -1; + int result = 0; + + if (tz->trips.critical.flags.valid) + trip++; + + if (tz->trips.hot.flags.valid) + trip++; + + if (tz->trips.passive.flags.valid) { + trip++; + for (i = 0; i < tz->trips.passive.devices.count; + i++) { + if (tz->trips.passive.devices.handles[i] != + handle) + continue; + result = action(thermal, trip, cdev); + if (result) + goto failed; + } + } + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { + if (!tz->trips.active[i].flags.valid) + break; + trip++; + for (j = 0; + j < tz->trips.active[i].devices.count; + j++) { + if (tz->trips.active[i].devices. + handles[j] != handle) + continue; + result = action(thermal, trip, cdev); + if (result) + goto failed; + } + } + + for (i = 0; i < tz->devices.count; i++) { + if (tz->devices.handles[i] != handle) + continue; + result = action(thermal, -1, cdev); + if (result) + goto failed; + } + +failed: + return result; +} + +static int +acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + return acpi_thermal_cooling_device_cb(thermal, cdev, + thermal_zone_bind_cooling_device); +} + +static int +acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + return acpi_thermal_cooling_device_cb(thermal, cdev, + thermal_zone_unbind_cooling_device); +} + +static struct thermal_zone_device_ops acpi_thermal_zone_ops = { + .bind = acpi_thermal_bind_cooling_device, + .unbind = acpi_thermal_unbind_cooling_device, + .get_temp = thermal_get_temp, + .get_mode = thermal_get_mode, + .set_mode = thermal_set_mode, + .get_trip_type = thermal_get_trip_type, + .get_trip_temp = thermal_get_trip_temp, +}; + +static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) +{ + int trips = 0; + int result; + int i; + + if (tz->trips.critical.flags.valid) + trips++; + + if (tz->trips.hot.flags.valid) + trips++; + + if (tz->trips.passive.flags.valid) + trips++; + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && + tz->trips.active[i].flags.valid; i++, trips++); + tz->thermal_zone = thermal_zone_device_register("ACPI thermal zone", + trips, tz, &acpi_thermal_zone_ops); + if (!tz->thermal_zone) + return -ENODEV; + + result = sysfs_create_link(&tz->device->dev.kobj, + &tz->thermal_zone->device.kobj, "thermal_zone"); + if (result) + return result; + + result = sysfs_create_link(&tz->thermal_zone->device.kobj, + &tz->device->dev.kobj, "device"); + if (result) + return result; + + tz->tz_enabled = 1; + + printk(KERN_INFO PREFIX "%s is registered as thermal_zone%d\n", + tz->device->dev.bus_id, tz->thermal_zone->id); + return 0; +} + +static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz) +{ + sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone"); + sysfs_remove_link(&tz->thermal_zone->device.kobj, "device"); + thermal_zone_device_unregister(tz->thermal_zone); + tz->thermal_zone = NULL; +} + + /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ @@ -1260,13 +1532,19 @@ static int acpi_thermal_add(struct acpi_device *device) strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS); acpi_driver_data(device) = tz; mutex_init(&tz->lock); + + result = acpi_thermal_get_info(tz); if (result) - goto end; + goto free_memory; + + result = acpi_thermal_register_thermal_zone(tz); + if (result) + goto free_memory; result = acpi_thermal_add_fs(device); if (result) - goto end; + goto unregister_thermal_zone; init_timer(&tz->timer); @@ -1277,19 +1555,21 @@ static int acpi_thermal_add(struct acpi_device *device) acpi_thermal_notify, tz); if (ACPI_FAILURE(status)) { result = -ENODEV; - goto end; + goto remove_fs; } printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); + goto end; - end: - if (result) { - acpi_thermal_remove_fs(device); - kfree(tz); - } - +remove_fs: + acpi_thermal_remove_fs(device); +unregister_thermal_zone: + thermal_zone_device_unregister(tz->thermal_zone); +free_memory: + kfree(tz); +end: return result; } @@ -1329,6 +1609,7 @@ static int acpi_thermal_remove(struct acpi_device *device, int type) } acpi_thermal_remove_fs(device); + acpi_thermal_unregister_thermal_zone(tz); mutex_destroy(&tz->lock); kfree(tz); return 0; From ce44e19701ac1de004815c225585ff617c5948b4 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:25 +0800 Subject: [PATCH 055/112] ACPI: ACPI thermal zone handle notification correctly Change the ACPI thermal action upon notification 0x81 and 0x82. According to the ACPI spec, we should: re-evaluate _PSV and _ACx methods upon notification 0x81 re-evaluate _PSL and _ALx and _TZD upon notificaiton 0x82. But the current code re-evaluates all the trip points for 0x81 while only re-evaluates _TZD for 0x82. Fix this violation of ACPI spec. TODO: devices in _PSL, _ALx and _TZD may change after a notification 0x82. At this time, we need to re-bind the cooling devices with the thermal zone. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 335 +++++++++++++++++++++++------------------ 1 file changed, 189 insertions(+), 146 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index c6cfce4c0122..d317da5c6e9c 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -323,173 +323,221 @@ static int acpi_thermal_set_cooling_mode(struct acpi_thermal *tz, int mode) return 0; } -static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) +#define ACPI_TRIPS_CRITICAL 0x01 +#define ACPI_TRIPS_HOT 0x02 +#define ACPI_TRIPS_PASSIVE 0x04 +#define ACPI_TRIPS_ACTIVE 0x08 +#define ACPI_TRIPS_DEVICES 0x10 + +#define ACPI_TRIPS_REFRESH_THRESHOLDS (ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE) +#define ACPI_TRIPS_REFRESH_DEVICES ACPI_TRIPS_DEVICES + +#define ACPI_TRIPS_INIT (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \ + ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \ + ACPI_TRIPS_DEVICES) + +/* + * This exception is thrown out in two cases: + * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid + * when re-evaluating the AML code. + * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change. + * We need to re-bind the cooling devices of a thermal zone when this occurs. + */ +#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, str) \ +do { \ + if (flags != ACPI_TRIPS_INIT) \ + ACPI_EXCEPTION((AE_INFO, AE_ERROR, \ + "ACPI thermal trip point %s changed\n" \ + "Please send acpidump to linux-acpi@vger.kernel.org\n", str)); \ +} while (0) + +static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) { acpi_status status = AE_OK; - int i = 0; - - - if (!tz) - return -EINVAL; + struct acpi_handle_list devices; + int valid = 0; + int i; /* Critical Shutdown (required) */ - - status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, - &tz->trips.critical.temperature); - if (ACPI_FAILURE(status)) { - tz->trips.critical.flags.valid = 0; - ACPI_EXCEPTION((AE_INFO, status, "No critical threshold")); - return -ENODEV; - } else { - tz->trips.critical.flags.valid = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Found critical threshold [%lu]\n", - tz->trips.critical.temperature)); - } - - if (tz->trips.critical.flags.valid == 1) { - if (crt == -1) { + if (flag & ACPI_TRIPS_CRITICAL) { + status = acpi_evaluate_integer(tz->device->handle, + "_CRT", NULL, &tz->trips.critical.temperature); + if (ACPI_FAILURE(status)) { tz->trips.critical.flags.valid = 0; - } else if (crt > 0) { - unsigned long crt_k = CELSIUS_TO_KELVIN(crt); - - /* - * Allow override to lower critical threshold - */ - if (crt_k < tz->trips.critical.temperature) - tz->trips.critical.temperature = crt_k; + ACPI_EXCEPTION((AE_INFO, status, + "No critical threshold")); + return -ENODEV; + } else { + tz->trips.critical.flags.valid = 1; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Found critical threshold [%lu]\n", + tz->trips.critical.temperature)); + } + if (tz->trips.critical.flags.valid == 1) { + if (crt == -1) { + tz->trips.critical.flags.valid = 0; + } else if (crt > 0) { + unsigned long crt_k = CELSIUS_TO_KELVIN(crt); + /* + * Allow override to lower critical threshold + */ + if (crt_k < tz->trips.critical.temperature) + tz->trips.critical.temperature = crt_k; + } } } /* Critical Sleep (optional) */ - - status = - acpi_evaluate_integer(tz->device->handle, "_HOT", NULL, - &tz->trips.hot.temperature); - if (ACPI_FAILURE(status)) { - tz->trips.hot.flags.valid = 0; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No hot threshold\n")); - } else { - tz->trips.hot.flags.valid = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found hot threshold [%lu]\n", - tz->trips.hot.temperature)); - } - - /* Passive: Processors (optional) */ - - if (psv == -1) { - status = AE_SUPPORT; - } else if (psv > 0) { - tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv); - status = AE_OK; - } else { + if (flag & ACPI_TRIPS_HOT) { status = acpi_evaluate_integer(tz->device->handle, - "_PSV", NULL, &tz->trips.passive.temperature); - } - - if (ACPI_FAILURE(status)) { - tz->trips.passive.flags.valid = 0; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No passive threshold\n")); - } else { - tz->trips.passive.flags.valid = 1; - - status = - acpi_evaluate_integer(tz->device->handle, "_TC1", NULL, - &tz->trips.passive.tc1); - if (ACPI_FAILURE(status)) - tz->trips.passive.flags.valid = 0; - - status = - acpi_evaluate_integer(tz->device->handle, "_TC2", NULL, - &tz->trips.passive.tc2); - if (ACPI_FAILURE(status)) - tz->trips.passive.flags.valid = 0; - - status = - acpi_evaluate_integer(tz->device->handle, "_TSP", NULL, - &tz->trips.passive.tsp); - if (ACPI_FAILURE(status)) - tz->trips.passive.flags.valid = 0; - - status = - acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, - &tz->trips.passive.devices); - if (ACPI_FAILURE(status)) - tz->trips.passive.flags.valid = 0; - - if (!tz->trips.passive.flags.valid) - printk(KERN_WARNING PREFIX "Invalid passive threshold\n"); - else + "_HOT", NULL, &tz->trips.hot.temperature); + if (ACPI_FAILURE(status)) { + tz->trips.hot.flags.valid = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Found passive threshold [%lu]\n", - tz->trips.passive.temperature)); + "No hot threshold\n")); + } else { + tz->trips.hot.flags.valid = 1; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Found hot threshold [%lu]\n", + tz->trips.critical.temperature)); + } } - /* Active: Fans, etc. (optional) */ + /* Passive (optional) */ + if (flag & ACPI_TRIPS_PASSIVE) { + valid = tz->trips.passive.flags.valid; + if (psv == -1) { + status = AE_SUPPORT; + } else if (psv > 0) { + tz->trips.passive.temperature = CELSIUS_TO_KELVIN(psv); + status = AE_OK; + } else { + status = acpi_evaluate_integer(tz->device->handle, + "_PSV", NULL, &tz->trips.passive.temperature); + } + if (ACPI_FAILURE(status)) + tz->trips.passive.flags.valid = 0; + else { + tz->trips.passive.flags.valid = 1; + if (flag == ACPI_TRIPS_INIT) { + status = acpi_evaluate_integer( + tz->device->handle, "_TC1", + NULL, &tz->trips.passive.tc1); + if (ACPI_FAILURE(status)) + tz->trips.passive.flags.valid = 0; + status = acpi_evaluate_integer( + tz->device->handle, "_TC2", + NULL, &tz->trips.passive.tc2); + if (ACPI_FAILURE(status)) + tz->trips.passive.flags.valid = 0; + status = acpi_evaluate_integer( + tz->device->handle, "_TSP", + NULL, &tz->trips.passive.tsp); + if (ACPI_FAILURE(status)) + tz->trips.passive.flags.valid = 0; + } + } + } + if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) { + memset(&devices, 0, sizeof(struct acpi_handle_list)); + status = acpi_evaluate_reference(tz->device->handle, "_PSL", + NULL, &devices); + if (ACPI_FAILURE(status)) + tz->trips.passive.flags.valid = 0; + else + tz->trips.passive.flags.valid = 1; + + if (memcmp(&tz->trips.passive.devices, &devices, + sizeof(struct acpi_handle_list))) { + memcpy(&tz->trips.passive.devices, &devices, + sizeof(struct acpi_handle_list)); + ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device"); + } + } + if ((flag & ACPI_TRIPS_PASSIVE) || (flag & ACPI_TRIPS_DEVICES)) { + if (valid != tz->trips.passive.flags.valid) + ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state"); + } + + /* Active (optional) */ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { - char name[5] = { '_', 'A', 'C', ('0' + i), '\0' }; + valid = tz->trips.active[i].flags.valid; if (act == -1) - break; /* disable all active trip points */ + break; /* disable all active trip points */ - status = acpi_evaluate_integer(tz->device->handle, - name, NULL, &tz->trips.active[i].temperature); - - if (ACPI_FAILURE(status)) { - if (i == 0) /* no active trip points */ + if (flag & ACPI_TRIPS_ACTIVE) { + status = acpi_evaluate_integer(tz->device->handle, + name, NULL, &tz->trips.active[i].temperature); + if (ACPI_FAILURE(status)) { + tz->trips.active[i].flags.valid = 0; + if (i == 0) + break; + if (act <= 0) + break; + if (i == 1) + tz->trips.active[0].temperature = + CELSIUS_TO_KELVIN(act); + else + /* + * Don't allow override higher than + * the next higher trip point + */ + tz->trips.active[i - 1].temperature = + (tz->trips.active[i - 2].temperature < + CELSIUS_TO_KELVIN(act) ? + tz->trips.active[i - 2].temperature : + CELSIUS_TO_KELVIN(act)); break; - if (act <= 0) /* no override requested */ - break; - if (i == 1) { /* 1 trip point */ - tz->trips.active[0].temperature = - CELSIUS_TO_KELVIN(act); - } else { /* multiple trips */ - /* - * Don't allow override higher than - * the next higher trip point - */ - tz->trips.active[i - 1].temperature = - (tz->trips.active[i - 2].temperature < - CELSIUS_TO_KELVIN(act) ? - tz->trips.active[i - 2].temperature : - CELSIUS_TO_KELVIN(act)); - } - break; + } else + tz->trips.active[i].flags.valid = 1; } name[2] = 'L'; - status = - acpi_evaluate_reference(tz->device->handle, name, NULL, - &tz->trips.active[i].devices); - if (ACPI_SUCCESS(status)) { - tz->trips.active[i].flags.valid = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Found active threshold [%d]:[%lu]\n", - i, tz->trips.active[i].temperature)); - } else - ACPI_EXCEPTION((AE_INFO, status, - "Invalid active threshold [%d]", i)); + if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.active[i].flags.valid ) { + memset(&devices, 0, sizeof(struct acpi_handle_list)); + status = acpi_evaluate_reference(tz->device->handle, + name, NULL, &devices); + if (ACPI_FAILURE(status)) + tz->trips.active[i].flags.valid = 0; + else + tz->trips.active[i].flags.valid = 1; + + if (memcmp(&tz->trips.active[i].devices, &devices, + sizeof(struct acpi_handle_list))) { + memcpy(&tz->trips.active[i].devices, &devices, + sizeof(struct acpi_handle_list)); + ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device"); + } + } + if ((flag & ACPI_TRIPS_ACTIVE) || (flag & ACPI_TRIPS_DEVICES)) + if (valid != tz->trips.active[i].flags.valid) + ACPI_THERMAL_TRIPS_EXCEPTION(flag, "state"); + + if (!tz->trips.active[i].flags.valid) + break; + } + + if (flag & ACPI_TRIPS_DEVICES) { + memset(&devices, 0, sizeof(struct acpi_handle_list)); + status = acpi_evaluate_reference(tz->device->handle, "_TZD", + NULL, &devices); + if (memcmp(&tz->devices, &devices, + sizeof(struct acpi_handle_list))) { + memcpy(&tz->devices, &devices, + sizeof(struct acpi_handle_list)); + ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device"); + } } return 0; } -static int acpi_thermal_get_devices(struct acpi_thermal *tz) +static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) { - acpi_status status = AE_OK; - - - if (!tz) - return -EINVAL; - - status = - acpi_evaluate_reference(tz->device->handle, "_TZD", NULL, &tz->devices); - if (ACPI_FAILURE(status)) - return -ENODEV; - - return 0; + return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT); } static int acpi_thermal_critical(struct acpi_thermal *tz) @@ -1453,15 +1501,15 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) acpi_thermal_check(tz); break; case ACPI_THERMAL_NOTIFY_THRESHOLDS: - acpi_thermal_get_trip_points(tz); + acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, device->dev.bus_id, event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: - if (tz->flags.devices) - acpi_thermal_get_devices(tz); + acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); + acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, device->dev.bus_id, event, 0); @@ -1504,11 +1552,6 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) else acpi_thermal_get_polling_frequency(tz); - /* Get devices in this thermal zone [_TZD] (optional) */ - result = acpi_thermal_get_devices(tz); - if (!result) - tz->flags.devices = 1; - return 0; } From 05a83d972293f39a66bc2aa409a5e7996bba585d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:24 +0800 Subject: [PATCH 056/112] ACPI: register ACPI Fan as generic thermal cooling device Register ACPI Fan as thermal cooling device. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/fan.c | 90 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 83 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index a6e149d692cb..f6e8165c32e8 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -30,7 +30,7 @@ #include #include #include - +#include #include #include @@ -68,9 +68,55 @@ static struct acpi_driver acpi_fan_driver = { }, }; +/* thermal cooling device callbacks */ +static int fan_get_max_state(struct thermal_cooling_device *cdev, char *buf) +{ + /* ACPI fan device only support two states: ON/OFF */ + return sprintf(buf, "1\n"); +} + +static int fan_get_cur_state(struct thermal_cooling_device *cdev, char *buf) +{ + struct acpi_device *device = cdev->devdata; + int state; + int result; + + if (!device) + return -EINVAL; + + result = acpi_bus_get_power(device->handle, &state); + if (result) + return result; + + return sprintf(buf, "%s\n", state == ACPI_STATE_D3 ? "0" : + (state == ACPI_STATE_D0 ? "1" : "unknown")); +} + +static int +fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state) +{ + struct acpi_device *device = cdev->devdata; + int result; + + if (!device || (state != 0 && state != 1)) + return -EINVAL; + + result = acpi_bus_set_power(device->handle, + state ? ACPI_STATE_D0 : ACPI_STATE_D3); + + return result; +} + +static struct thermal_cooling_device_ops fan_cooling_ops = { + .get_max_state = fan_get_max_state, + .get_cur_state = fan_get_cur_state, + .set_cur_state = fan_set_cur_state, +}; + /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ +#ifdef CONFIG_ACPI_PROCFS static struct proc_dir_entry *acpi_fan_dir; @@ -171,7 +217,17 @@ static int acpi_fan_remove_fs(struct acpi_device *device) return 0; } +#else +static int acpi_fan_add_fs(struct acpi_device *device) +{ + return 0; +} +static int acpi_fan_remove_fs(struct acpi_device *device) +{ + return 0; +} +#endif /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -179,9 +235,8 @@ static int acpi_fan_remove_fs(struct acpi_device *device) static int acpi_fan_add(struct acpi_device *device) { int result = 0; - struct acpi_fan *fan = NULL; int state = 0; - + struct thermal_cooling_device *cdev; if (!device) return -EINVAL; @@ -199,6 +254,25 @@ static int acpi_fan_add(struct acpi_device *device) acpi_bus_set_power(device->handle, state); device->flags.force_power_state = 0; + cdev = thermal_cooling_device_register("Fan", device, + &fan_cooling_ops); + if (cdev) + printk(KERN_INFO PREFIX + "%s is registered as cooling_device%d\n", + device->dev.bus_id, cdev->id); + else + goto end; + acpi_driver_data(device) = cdev; + result = sysfs_create_link(&device->dev.kobj, &cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + + result = sysfs_create_link(&cdev->device.kobj, &device->dev.kobj, + "device"); + if (result) + return result; + result = acpi_fan_add_fs(device); if (result) goto end; @@ -208,18 +282,20 @@ static int acpi_fan_add(struct acpi_device *device) !device->power.state ? "on" : "off"); end: - if (result) - kfree(fan); - return result; } static int acpi_fan_remove(struct acpi_device *device, int type) { - if (!device || !acpi_driver_data(device)) + struct thermal_cooling_device *cdev = acpi_driver_data(device); + + if (!device || !cdev) return -EINVAL; acpi_fan_remove_fs(device); + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&cdev->device.kobj, "device"); + thermal_cooling_device_unregister(cdev); return 0; } From d9460fd227ed2ce52941b6a12ad4de05c195f6aa Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:23 +0800 Subject: [PATCH 057/112] ACPI: register ACPI Processor as generic thermal cooling device Register ACPI processor as thermal cooling devices. A combination of processor T-state and P-state are used for thermal throttling. the processor will reduce the frequency first and then set the T-state. we use cpufreq_thermal_reduction_pctg to calculate the cpufreq limit, and call cpufreq_verify_with_limit to set the cpufreq limit. if cpufreq driver is loaded, then we have four cooling state for cpufreq control. cooling state 0: cpufreq limit == max_freq cooling state 1: cpufreq limit == max_freq * 80% cooling state 2: cpufreq limit == max_freq * 60% cooling state 3: cpufreq limit == max_freq * 40% after the cpufreq limit is set to 40 percentage of the max_freq, we use T-state for cooling. eg. a processor has P-state support, and it has 8 T-state (T0-T7), the max_state of the proceesor is 10: state cpufreq-limit T-state 0: max_freq T0 1: max_freq * 80% T0 2: max_freq * 60% T0 3: max_freq * 40% T0 4: max_freq * 40% T1 5: max_freq * 40% T2 6: max_freq * 40% T3 7: max_freq * 40% T4 8: max_freq * 40% T5 9: max_freq * 40% T6 10: max_freq * 40% T7 Signed-off-by: Zhang Rui Signed-off-by: Zhao Yakui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 23 ++++++ drivers/acpi/processor_thermal.c | 134 +++++++++++++++++++++++++++++-- include/acpi/processor.h | 6 +- 3 files changed, 155 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e48ee4f8749f..5668c5e8ae19 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -668,6 +668,24 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) acpi_processor_power_init(pr, device); + pr->cdev = thermal_cooling_device_register("Processor", device, + &processor_cooling_ops); + if (pr->cdev) + printk(KERN_INFO PREFIX + "%s is registered as cooling_device%d\n", + device->dev.bus_id, pr->cdev->id); + else + goto end; + + result = sysfs_create_link(&device->dev.kobj, &pr->cdev->device.kobj, + "thermal_cooling"); + if (result) + return result; + result = sysfs_create_link(&pr->cdev->device.kobj, &device->dev.kobj, + "device"); + if (result) + return result; + if (pr->flags.throttling) { printk(KERN_INFO PREFIX "%s [%s] (supports", acpi_device_name(device), acpi_device_bid(device)); @@ -791,6 +809,11 @@ static int acpi_processor_remove(struct acpi_device *device, int type) acpi_processor_remove_fs(device); + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&pr->cdev->device.kobj, "device"); + thermal_cooling_device_unregister(pr->cdev); + pr->cdev = NULL; + processors[pr->id] = NULL; kfree(pr); diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 06e6f3fb8825..9cb43f52f7b6 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -93,6 +94,9 @@ static int acpi_processor_apply_limit(struct acpi_processor *pr) * _any_ cpufreq driver and not only the acpi-cpufreq driver. */ +#define CPUFREQ_THERMAL_MIN_STEP 0 +#define CPUFREQ_THERMAL_MAX_STEP 3 + static unsigned int cpufreq_thermal_reduction_pctg[NR_CPUS]; static unsigned int acpi_thermal_cpufreq_is_init = 0; @@ -109,8 +113,9 @@ static int acpi_thermal_cpufreq_increase(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return -ENODEV; - if (cpufreq_thermal_reduction_pctg[cpu] < 60) { - cpufreq_thermal_reduction_pctg[cpu] += 20; + if (cpufreq_thermal_reduction_pctg[cpu] < + CPUFREQ_THERMAL_MAX_STEP) { + cpufreq_thermal_reduction_pctg[cpu]++; cpufreq_update_policy(cpu); return 0; } @@ -123,8 +128,9 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu) if (!cpu_has_cpufreq(cpu)) return -ENODEV; - if (cpufreq_thermal_reduction_pctg[cpu] > 20) - cpufreq_thermal_reduction_pctg[cpu] -= 20; + if (cpufreq_thermal_reduction_pctg[cpu] > + (CPUFREQ_THERMAL_MIN_STEP + 1)) + cpufreq_thermal_reduction_pctg[cpu]--; else cpufreq_thermal_reduction_pctg[cpu] = 0; cpufreq_update_policy(cpu); @@ -143,7 +149,7 @@ static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, max_freq = (policy->cpuinfo.max_freq * - (100 - cpufreq_thermal_reduction_pctg[policy->cpu])) / 100; + (100 - cpufreq_thermal_reduction_pctg[policy->cpu] * 20)) / 100; cpufreq_verify_within_limits(policy, 0, max_freq); @@ -155,6 +161,32 @@ static struct notifier_block acpi_thermal_cpufreq_notifier_block = { .notifier_call = acpi_thermal_cpufreq_notifier, }; +static int cpufreq_get_max_state(unsigned int cpu) +{ + if (!cpu_has_cpufreq(cpu)) + return 0; + + return CPUFREQ_THERMAL_MAX_STEP; +} + +static int cpufreq_get_cur_state(unsigned int cpu) +{ + if (!cpu_has_cpufreq(cpu)) + return 0; + + return cpufreq_thermal_reduction_pctg[cpu]; +} + +static int cpufreq_set_cur_state(unsigned int cpu, int state) +{ + if (!cpu_has_cpufreq(cpu)) + return 0; + + cpufreq_thermal_reduction_pctg[cpu] = state; + cpufreq_update_policy(cpu); + return 0; +} + void acpi_thermal_cpufreq_init(void) { int i; @@ -179,6 +211,20 @@ void acpi_thermal_cpufreq_exit(void) } #else /* ! CONFIG_CPU_FREQ */ +static int cpufreq_get_max_state(unsigned int cpu) +{ + return 0; +} + +static int cpufreq_get_cur_state(unsigned int cpu) +{ + return 0; +} + +static int cpufreq_set_cur_state(unsigned int cpu, int state) +{ + return 0; +} static int acpi_thermal_cpufreq_increase(unsigned int cpu) { @@ -310,6 +356,84 @@ int acpi_processor_get_limit_info(struct acpi_processor *pr) return 0; } +/* thermal coolign device callbacks */ +static int acpi_processor_max_state(struct acpi_processor *pr) +{ + int max_state = 0; + + /* + * There exists four states according to + * cpufreq_thermal_reduction_ptg. 0, 1, 2, 3 + */ + max_state += cpufreq_get_max_state(pr->id); + if (pr->flags.throttling) + max_state += (pr->throttling.state_count -1); + + return max_state; +} +static int +processor_get_max_state(struct thermal_cooling_device *cdev, char *buf) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_processor *pr = acpi_driver_data(device); + + if (!device || !pr) + return -EINVAL; + + return sprintf(buf, "%d\n", acpi_processor_max_state(pr)); +} + +static int +processor_get_cur_state(struct thermal_cooling_device *cdev, char *buf) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_processor *pr = acpi_driver_data(device); + int cur_state; + + if (!device || !pr) + return -EINVAL; + + cur_state = cpufreq_get_cur_state(pr->id); + if (pr->flags.throttling) + cur_state += pr->throttling.state; + + return sprintf(buf, "%d\n", cur_state); +} + +static int +processor_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_processor *pr = acpi_driver_data(device); + int result = 0; + int max_pstate; + + if (!device || !pr) + return -EINVAL; + + max_pstate = cpufreq_get_max_state(pr->id); + + if (state > acpi_processor_max_state(pr)) + return -EINVAL; + + if (state <= max_pstate) { + if (pr->flags.throttling && pr->throttling.state) + result = acpi_processor_set_throttling(pr, 0); + cpufreq_set_cur_state(pr->id, state); + } else { + cpufreq_set_cur_state(pr->id, max_pstate); + result = acpi_processor_set_throttling(pr, + state - max_pstate); + } + return result; +} + +struct thermal_cooling_device_ops processor_cooling_ops = { + .get_max_state = processor_get_max_state, + .get_cur_state = processor_get_cur_state, + .set_cur_state = processor_set_cur_state, +}; + /* /proc interface */ static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset) diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 76411b1fc4fd..0787635a11aa 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -4,7 +4,7 @@ #include #include #include - +#include #include #define ACPI_PROCESSOR_BUSY_METRIC 10 @@ -218,7 +218,7 @@ struct acpi_processor { struct acpi_processor_performance *performance; struct acpi_processor_throttling throttling; struct acpi_processor_limit limit; - + struct thermal_cooling_device *cdev; /* the _PDC objects for this processor, if any */ struct acpi_object_list *pdc; }; @@ -330,7 +330,7 @@ extern struct cpuidle_driver acpi_idle_driver; /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern struct file_operations acpi_processor_limit_fops; - +extern struct thermal_cooling_device_ops processor_cooling_ops; #ifdef CONFIG_CPU_FREQ void acpi_thermal_cpufreq_init(void); void acpi_thermal_cpufreq_exit(void); From 702ed512de9c8a67a69a981c73b7337c2131f198 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:22 +0800 Subject: [PATCH 058/112] ACPI: register ACPI Video LCD as generic thermal cooling device Register ACPI video device as thermal cooling devices as they may be listed in _TZD method and the backlight control can be used for throttling. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/video.c | 78 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 77 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bd77e81e81c1..eab9c4213b49 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -179,6 +180,7 @@ struct acpi_video_device { struct acpi_device *dev; struct acpi_video_device_brightness *brightness; struct backlight_device *backlight; + struct thermal_cooling_device *cdev; struct output_device *output_dev; }; @@ -334,6 +336,54 @@ static struct output_properties acpi_output_properties = { .set_state = acpi_video_output_set, .get_status = acpi_video_output_get, }; + + +/* thermal cooling device callbacks */ +static int video_get_max_state(struct thermal_cooling_device *cdev, char *buf) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_video_device *video = acpi_driver_data(device); + + return sprintf(buf, "%d\n", video->brightness->count - 3); +} + +static int video_get_cur_state(struct thermal_cooling_device *cdev, char *buf) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_video_device *video = acpi_driver_data(device); + unsigned long level; + int state; + + acpi_video_device_lcd_get_level_current(video, &level); + for (state = 2; state < video->brightness->count; state++) + if (level == video->brightness->levels[state]) + return sprintf(buf, "%d\n", + video->brightness->count - state - 1); + + return -EINVAL; +} + +static int +video_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_video_device *video = acpi_driver_data(device); + int level; + + if ( state >= video->brightness->count - 2) + return -EINVAL; + + state = video->brightness->count - state; + level = video->brightness->levels[state -1]; + return acpi_video_device_lcd_set_level(video, level); +} + +static struct thermal_cooling_device_ops video_cooling_ops = { + .get_max_state = video_get_max_state, + .get_cur_state = video_get_cur_state, + .set_cur_state = video_set_cur_state, +}; + /* -------------------------------------------------------------------------- Video Management -------------------------------------------------------------------------- */ @@ -653,6 +703,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ unsigned long tmp; + int result; static int count = 0; char *name; name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); @@ -666,8 +717,25 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->backlight->props.max_brightness = max_level; device->backlight->props.brightness = (int)tmp; backlight_update_status(device->backlight); - kfree(name); + + device->cdev = thermal_cooling_device_register("LCD", + device->dev, &video_cooling_ops); + if (device->cdev) { + printk(KERN_INFO PREFIX + "%s is registered as cooling_device%d\n", + device->dev->dev.bus_id, device->cdev->id); + result = sysfs_create_link(&device->dev->dev.kobj, + &device->cdev->device.kobj, + "thermal_cooling"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); + result = sysfs_create_link(&device->cdev->device.kobj, + &device->dev->dev.kobj, + "device"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); + } } if (device->cap._DCS && device->cap._DSS){ static int count = 0; @@ -1729,6 +1797,14 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) ACPI_DEVICE_NOTIFY, acpi_video_device_notify); backlight_device_unregister(device->backlight); + if (device->cdev) { + sysfs_remove_link(&device->dev->dev.kobj, + "thermal_cooling"); + sysfs_remove_link(&device->cdev->device.kobj, + "device"); + thermal_cooling_device_unregister(device->cdev); + device->cdev = NULL; + } video_output_unregister(device->output_dev); return 0; From 207339398ecb0835331c748612898dad2a09fdec Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:21 +0800 Subject: [PATCH 059/112] ACPI: attach thermal zone info Intel menlow driver needs to get the pointer of themal_zone_device structure of an ACPI thermal zone. Attach this to each ACPI thermal zone device object. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/bus.c | 25 +++++++++++++++++++++++++ drivers/acpi/thermal.c | 11 +++++++++++ include/acpi/acpi_bus.h | 2 ++ 3 files changed, 38 insertions(+) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 1b4cf984b081..8df325dafe0f 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -122,6 +122,31 @@ int acpi_bus_get_status(struct acpi_device *device) EXPORT_SYMBOL(acpi_bus_get_status); +void acpi_bus_private_data_handler(acpi_handle handle, + u32 function, void *context) +{ + return; +} +EXPORT_SYMBOL(acpi_bus_private_data_handler); + +int acpi_bus_get_private_data(acpi_handle handle, void **data) +{ + acpi_status status = AE_OK; + + if (!*data) + return -EINVAL; + + status = acpi_get_data(handle, acpi_bus_private_data_handler, data); + if (ACPI_FAILURE(status) || !*data) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n", + handle)); + return -ENODEV; + } + + return 0; +} +EXPORT_SYMBOL(acpi_bus_get_private_data); + /* -------------------------------------------------------------------------- Power Management -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index d317da5c6e9c..740036355722 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1101,6 +1101,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) { int trips = 0; int result; + acpi_status status; int i; if (tz->trips.critical.flags.valid) @@ -1129,6 +1130,15 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) if (result) return result; + status = acpi_attach_data(tz->device->handle, + acpi_bus_private_data_handler, + tz->thermal_zone); + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error attaching device data\n")); + return -ENODEV; + } + tz->tz_enabled = 1; printk(KERN_INFO PREFIX "%s is registered as thermal_zone%d\n", @@ -1142,6 +1152,7 @@ static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz) sysfs_remove_link(&tz->thermal_zone->device.kobj, "device"); thermal_zone_device_unregister(tz->thermal_zone); tz->thermal_zone = NULL; + acpi_detach_data(tz->device->handle, acpi_bus_private_data_handler); } diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index fb7171b1bd22..504af20b10c1 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -321,6 +321,8 @@ struct acpi_bus_event { extern struct kobject *acpi_kobj; extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int); +void acpi_bus_private_data_handler(acpi_handle, u32, void *); +int acpi_bus_get_private_data(acpi_handle, void **); /* * External Functions */ From 041d4bbf128f645fe53bb22309efb9db14dbf5b5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:19 +0800 Subject: [PATCH 060/112] ACPI: CELSIUS_TO_KELVIN fixup Fix an imprecision in CELSIUS_TO_KELVIN and move these two macroes to a proper place. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 3 --- include/linux/thermal.h | 4 ++++ 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 740036355722..aee371f9daf8 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -65,9 +65,6 @@ #define ACPI_THERMAL_MAX_ACTIVE 10 #define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65 -#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732>=0) ? ((long)t-2732+5)/10 : ((long)t-2732-5)/10) -#define CELSIUS_TO_KELVIN(t) ((t+273)*10) - #define _COMPONENT ACPI_THERMAL_COMPONENT ACPI_MODULE_NAME("thermal"); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index e4b76c7afb51..bba7712cadc7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -61,6 +61,10 @@ struct thermal_cooling_device { struct list_head node; }; +#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ + ((long)t-2732+5)/10 : ((long)t-2732-5)/10) +#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) + struct thermal_zone_device { int id; char type[THERMAL_NAME_LENGTH]; From cc0573b3250214034062ddf8c64359596d8af521 Mon Sep 17 00:00:00 2001 From: Thomas Sujith Date: Fri, 25 Jan 2008 11:45:44 +0800 Subject: [PATCH 061/112] intel_menlo: introduce new platform specific driver Intel menlow platform specific driver for thermal management extension. Signed-off-by: Thomas Sujith Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/misc/Kconfig | 9 + drivers/misc/Makefile | 1 + drivers/misc/intel_menlow.c | 526 ++++++++++++++++++++++++++++++++++++ 3 files changed, 536 insertions(+) create mode 100644 drivers/misc/intel_menlow.c diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b5e67c0ff433..d1380a5a0030 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -232,4 +232,13 @@ config ATMEL_SSC If unsure, say N. +config INTEL_MENLOW + tristate "Thermal Management driver for Intel menlow platform" + depends on ACPI_THERMAL + ---help--- + ACPI thermal management enhancement driver on + Intel Menlow platform. + + If unsure, say N. + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 87f2685d728f..a9e8faffc1b1 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o +obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c new file mode 100644 index 000000000000..f70984ab1e1b --- /dev/null +++ b/drivers/misc/intel_menlow.c @@ -0,0 +1,526 @@ +/* + * intel_menlow.c - Intel menlow Driver for thermal management extension + * + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Sujith Thomas + * Copyright (C) 2008 Zhang Rui + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This driver creates the sys I/F for programming the sensors. + * It also implements the driver for intel menlow memory controller (hardware + * id is INT0002) which makes use of the platform specific ACPI methods + * to get/set bandwidth. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +MODULE_AUTHOR("Thomas Sujith"); +MODULE_AUTHOR("Zhang Rui"); +MODULE_DESCRIPTION("Intel Menlow platform specific driver"); +MODULE_LICENSE("GPL"); + +/* + * Memory controller device control + */ + +#define MEMORY_GET_BANDWIDTH "GTHS" +#define MEMORY_SET_BANDWIDTH "STHS" +#define MEMORY_ARG_CUR_BANDWIDTH 1 +#define MEMORY_ARG_MAX_BANDWIDTH 0 + +static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, + unsigned long *max_state) +{ + struct acpi_device *device = cdev->devdata; + acpi_handle handle = device->handle; + unsigned long value; + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status = AE_OK; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = MEMORY_ARG_MAX_BANDWIDTH; + status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH, + &arg_list, &value); + if (ACPI_FAILURE(status)) + return -EFAULT; + + *max_state = value - 1; + return 0; +} + +static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev, + char *buf) +{ + unsigned long value; + if (memory_get_int_max_bandwidth(cdev, &value)) + return -EINVAL; + + return sprintf(buf, "%ld\n", value); +} + +static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev, + char *buf) +{ + struct acpi_device *device = cdev->devdata; + acpi_handle handle = device->handle; + unsigned long value; + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status = AE_OK; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = MEMORY_ARG_CUR_BANDWIDTH; + status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH, + &arg_list, &value); + if (ACPI_FAILURE(status)) + return -EFAULT; + + return sprintf(buf, "%ld\n", value); +} + +static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, + unsigned int state) +{ + struct acpi_device *device = cdev->devdata; + acpi_handle handle = device->handle; + struct acpi_object_list arg_list; + union acpi_object arg; + acpi_status status; + int temp; + unsigned long max_state; + + if (memory_get_int_max_bandwidth(cdev, &max_state)) + return -EFAULT; + + if (max_state < 0 || state > max_state) + return -EINVAL; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = state; + + status = + acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list, + (unsigned long *)&temp); + + printk(KERN_INFO + "Bandwidth value was %d: status is %d\n", state, status); + if (ACPI_FAILURE(status)) + return -EFAULT; + + return 0; +} + +static struct thermal_cooling_device_ops memory_cooling_ops = { + .get_max_state = memory_get_max_bandwidth, + .get_cur_state = memory_get_cur_bandwidth, + .set_cur_state = memory_set_cur_bandwidth, +}; + +/* + * Memory Device Management + */ +static int intel_menlow_memory_add(struct acpi_device *device) +{ + int result = -ENODEV; + acpi_status status = AE_OK; + acpi_handle dummy; + struct thermal_cooling_device *cdev; + + if (!device) + return -EINVAL; + + status = acpi_get_handle(device->handle, MEMORY_GET_BANDWIDTH, &dummy); + if (ACPI_FAILURE(status)) + goto end; + + status = acpi_get_handle(device->handle, MEMORY_SET_BANDWIDTH, &dummy); + if (ACPI_FAILURE(status)) + goto end; + + cdev = thermal_cooling_device_register("Memory controller", device, + &memory_cooling_ops); + acpi_driver_data(device) = cdev; + if (!cdev) + result = -ENODEV; + else { + result = sysfs_create_link(&device->dev.kobj, + &cdev->device.kobj, "thermal_cooling"); + if (result) + goto unregister; + + result = sysfs_create_link(&cdev->device.kobj, + &device->dev.kobj, "device"); + if (result) { + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + goto unregister; + } + } + + end: + return result; + + unregister: + thermal_cooling_device_unregister(cdev); + return result; + +} + +static int intel_menlow_memory_remove(struct acpi_device *device, int type) +{ + struct thermal_cooling_device *cdev = acpi_driver_data(device); + + if (!device || !cdev) + return -EINVAL; + + sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&cdev->device.kobj, "device"); + thermal_cooling_device_unregister(cdev); + + return 0; +} + +const static struct acpi_device_id intel_menlow_memory_ids[] = { + {"INT0002", 0}, + {"", 0}, +}; + +static struct acpi_driver intel_menlow_memory_driver = { + .name = "intel_menlow_thermal_control", + .ids = intel_menlow_memory_ids, + .ops = { + .add = intel_menlow_memory_add, + .remove = intel_menlow_memory_remove, + }, +}; + +/* + * Sensor control on menlow platform + */ + +#define THERMAL_AUX0 0 +#define THERMAL_AUX1 1 +#define GET_AUX0 "GAX0" +#define GET_AUX1 "GAX1" +#define SET_AUX0 "SAX0" +#define SET_AUX1 "SAX1" + +struct intel_menlow_attribute { + struct device_attribute attr; + struct device *device; + acpi_handle handle; + struct list_head node; +}; + +static LIST_HEAD(intel_menlow_attr_list); +static DEFINE_MUTEX(intel_menlow_attr_lock); + +/* + * sensor_get_auxtrip - get the current auxtrip value from sensor + * @name: Thermalzone name + * @auxtype : AUX0/AUX1 + * @buf: syfs buffer + */ +static int sensor_get_auxtrip(acpi_handle handle, int index, int *value) +{ + acpi_status status; + + if ((index != 0 && index != 1) || !value) + return -EINVAL; + + status = acpi_evaluate_integer(handle, index ? GET_AUX1 : GET_AUX0, + NULL, (unsigned long *)value); + if (ACPI_FAILURE(status)) + return -EIO; + + return 0; +} + +/* + * sensor_set_auxtrip - set the new auxtrip value to sensor + * @name: Thermalzone name + * @auxtype : AUX0/AUX1 + * @buf: syfs buffer + */ +static int sensor_set_auxtrip(acpi_handle handle, int index, int value) +{ + acpi_status status; + union acpi_object arg = { + ACPI_TYPE_INTEGER + }; + struct acpi_object_list args = { + 1, &arg + }; + int temp; + + if (index != 0 && index != 1) + return -EINVAL; + + status = acpi_evaluate_integer(handle, index ? GET_AUX0 : GET_AUX1, + NULL, (unsigned long *)&temp); + if (ACPI_FAILURE(status)) + return -EIO; + if ((index && value < temp) || (!index && value > temp)) + return -EINVAL; + + arg.integer.value = value; + status = acpi_evaluate_integer(handle, index ? SET_AUX1 : SET_AUX0, + &args, (unsigned long *)&temp); + if (ACPI_FAILURE(status)) + return -EIO; + + /* do we need to check the return value of SAX0/SAX1 ? */ + + return 0; +} + +#define to_intel_menlow_attr(_attr) \ + container_of(_attr, struct intel_menlow_attribute, attr) + +static ssize_t aux0_show(struct device *dev, + struct device_attribute *dev_attr, char *buf) +{ + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr); + int value; + int result; + + result = sensor_get_auxtrip(attr->handle, 0, &value); + + return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value)); +} + +static ssize_t aux1_show(struct device *dev, + struct device_attribute *dev_attr, char *buf) +{ + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr); + int value; + int result; + + result = sensor_get_auxtrip(attr->handle, 1, &value); + + return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value)); +} + +static ssize_t aux0_store(struct device *dev, + struct device_attribute *dev_attr, + const char *buf, size_t count) +{ + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr); + int value; + int result; + + /*Sanity check; should be a positive integer */ + if (!sscanf(buf, "%d", &value)) + return -EINVAL; + + if (value < 0) + return -EINVAL; + + result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_KELVIN(value)); + return result ? result : count; +} + +static ssize_t aux1_store(struct device *dev, + struct device_attribute *dev_attr, + const char *buf, size_t count) +{ + struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr); + int value; + int result; + + /*Sanity check; should be a positive integer */ + if (!sscanf(buf, "%d", &value)) + return -EINVAL; + + if (value < 0) + return -EINVAL; + + result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_KELVIN(value)); + return result ? result : count; +} + +/* BIOS can enable/disable the thermal user application in dabney platform */ +#define BIOS_ENABLED "\\_TZ.GSTS" +static ssize_t bios_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + acpi_status status; + unsigned long bios_enabled; + + status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &bios_enabled); + if (ACPI_FAILURE(status)) + return -ENODEV; + + return sprintf(buf, "%s\n", bios_enabled ? "enabled" : "disabled"); +} + +static int intel_menlow_add_one_attribute(char *name, int mode, void *show, + void *store, struct device *dev, + acpi_handle handle) +{ + struct intel_menlow_attribute *attr; + int result; + + attr = kzalloc(sizeof(struct intel_menlow_attribute), GFP_KERNEL); + if (!attr) + return -ENOMEM; + + attr->attr.attr.name = name; + attr->attr.attr.mode = mode; + attr->attr.show = show; + attr->attr.store = store; + attr->device = dev; + attr->handle = handle; + + result = device_create_file(dev, &attr->attr); + if (result) + return result; + + mutex_lock(&intel_menlow_attr_lock); + list_add_tail(&attr->node, &intel_menlow_attr_list); + mutex_unlock(&intel_menlow_attr_lock); + + return 0; +} + +static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl, + void *context, void **rv) +{ + acpi_status status; + acpi_handle dummy; + struct thermal_zone_device *thermal; + int result; + + result = acpi_bus_get_private_data(handle, (void **)&thermal); + if (result) + return 0; + + /* _TZ must have the AUX0/1 methods */ + status = acpi_get_handle(handle, GET_AUX0, &dummy); + if (ACPI_FAILURE(status)) + goto not_found; + + status = acpi_get_handle(handle, SET_AUX0, &dummy); + if (ACPI_FAILURE(status)) + goto not_found; + + result = intel_menlow_add_one_attribute("aux0", 0644, + aux0_show, aux0_store, + &thermal->device, handle); + if (result) + return AE_ERROR; + + status = acpi_get_handle(handle, GET_AUX1, &dummy); + if (ACPI_FAILURE(status)) + goto not_found; + + status = acpi_get_handle(handle, SET_AUX1, &dummy); + if (ACPI_FAILURE(status)) + goto not_found; + + result = intel_menlow_add_one_attribute("aux1", 0644, + aux1_show, aux1_store, + &thermal->device, handle); + if (result) + return AE_ERROR; + + /* + * create the "dabney_enabled" attribute which means the user app + * should be loaded or not + */ + + result = intel_menlow_add_one_attribute("bios_enabled", 0444, + bios_enabled_show, NULL, + &thermal->device, handle); + if (result) + return AE_ERROR; + + not_found: + if (status == AE_NOT_FOUND) + return AE_OK; + else + return status; +} + +static void intel_menlow_unregister_sensor(void) +{ + struct intel_menlow_attribute *pos, *next; + + mutex_lock(&intel_menlow_attr_lock); + list_for_each_entry_safe(pos, next, &intel_menlow_attr_list, node) { + list_del(&pos->node); + device_remove_file(pos->device, &pos->attr); + kfree(pos); + } + mutex_unlock(&intel_menlow_attr_lock); + + return; +} + +static int __init intel_menlow_module_init(void) +{ + int result = -ENODEV; + acpi_status status; + unsigned long enable; + + if (acpi_disabled) + return result; + + /* Looking for the \_TZ.GSTS method */ + status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &enable); + if (ACPI_FAILURE(status) || !enable) + return -ENODEV; + + /* Looking for ACPI device MEM0 with hardware id INT0002 */ + result = acpi_bus_register_driver(&intel_menlow_memory_driver); + if (result) + return result; + + /* Looking for sensors in each ACPI thermal zone */ + status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + intel_menlow_register_sensor, NULL, NULL); + if (ACPI_FAILURE(status)) + return -ENODEV; + + return 0; +} + +static void __exit intel_menlow_module_exit(void) +{ + acpi_bus_unregister_driver(&intel_menlow_memory_driver); + intel_menlow_unregister_sensor(); +} + +module_init(intel_menlow_module_init); +module_exit(intel_menlow_module_exit); From 653a00c9662304ef72a3eb4e681c91720960e0b4 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 17 Jan 2008 15:51:18 +0800 Subject: [PATCH 062/112] ACPI: thermal fixup The alias name may be used in _PSL, _ALx and _TZD, so we bind the cooling device only if the acpi_device node matches. Signed-off-by: Zhang Rui Signed-off-by: Thomas Sujith Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 42 ++++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index aee371f9daf8..73f276bc6e4f 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1015,7 +1015,9 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, { struct acpi_device *device = cdev->devdata; struct acpi_thermal *tz = thermal->devdata; - acpi_handle handle = device->handle; + struct acpi_device *dev; + acpi_status status; + acpi_handle handle; int i; int j; int trip = -1; @@ -1031,12 +1033,13 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, trip++; for (i = 0; i < tz->trips.passive.devices.count; i++) { - if (tz->trips.passive.devices.handles[i] != - handle) - continue; - result = action(thermal, trip, cdev); - if (result) - goto failed; + handle = tz->trips.passive.devices.handles[i]; + status = acpi_bus_get_device(handle, &dev); + if (ACPI_SUCCESS(status) && (dev == device)) { + result = action(thermal, trip, cdev); + if (result) + goto failed; + } } } @@ -1047,21 +1050,24 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, for (j = 0; j < tz->trips.active[i].devices.count; j++) { - if (tz->trips.active[i].devices. - handles[j] != handle) - continue; - result = action(thermal, trip, cdev); - if (result) - goto failed; + handle = tz->trips.active[i].devices.handles[j]; + status = acpi_bus_get_device(handle, &dev); + if (ACPI_SUCCESS(status) && (dev == device)) { + result = action(thermal, trip, cdev); + if (result) + goto failed; + } } } for (i = 0; i < tz->devices.count; i++) { - if (tz->devices.handles[i] != handle) - continue; - result = action(thermal, -1, cdev); - if (result) - goto failed; + handle = tz->devices.handles[i]; + status = acpi_bus_get_device(handle, &dev); + if (ACPI_SUCCESS(status) && (dev == device)) { + result = action(thermal, -1, cdev); + if (result) + goto failed; + } } failed: From 0119509c4fbc9adcef1472817fda295334612976 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 17 Jan 2008 03:39:36 +0000 Subject: [PATCH 063/112] ACPI: video: Ignore devices that aren't present in hardware Vendors often ship machines with a choice of integrated or discrete graphics, and use the same DSDT for both. As a result, the ACPI video module will locate devices that may not exist on this specific platform. Attempt to determine whether the device exists or not, and abort the device creation if it doesn't. http://bugzilla.kernel.org/show_bug.cgi?id=9614 Signed-off-by: Matthew Garrett Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bd77e81e81c1..2270144d7286 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1256,8 +1256,37 @@ acpi_video_bus_write_DOS(struct file *file, static int acpi_video_bus_add_fs(struct acpi_device *device) { + long device_id; + int status; struct proc_dir_entry *entry = NULL; struct acpi_video_bus *video; + struct device *dev; + + status = + acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); + + if (!ACPI_SUCCESS(status)) + return -ENODEV; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a video device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(device->handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(device->handle, &phandle)) + return -ENODEV; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return -ENODEV; + put_device(dev); + video = acpi_driver_data(device); From 3abbd337c60591305cbfeb984ff2922c175be37f Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 28 Jan 2008 13:53:21 +0800 Subject: [PATCH 064/112] ACPI: Set _PSD ACPI_PDC_SMP_T_SWCOORD The ACPI_PDC_SMP_T_SWCOORD bit is set by and OS that is capable of native ACPI throttling software coordination for mutli-processors using the _TSD information. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- arch/ia64/kernel/acpi-processor.c | 6 ++++++ arch/x86/kernel/acpi/processor.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c index 5a216c019924..cbe6cee5a550 100644 --- a/arch/ia64/kernel/acpi-processor.c +++ b/arch/ia64/kernel/acpi-processor.c @@ -45,6 +45,12 @@ static void init_intel_pdc(struct acpi_processor *pr) buf[0] = ACPI_PDC_REVISION_ID; buf[1] = 1; buf[2] = ACPI_PDC_EST_CAPABILITY_SMP; + /* + * The default of PDC_SMP_T_SWCOORD bit is set for IA64 cpu so + * that OSPM is capable of native ACPI throttling software + * coordination using BIOS supplied _TSD info. + */ + buf[2] |= ACPI_PDC_SMP_T_SWCOORD; obj->type = ACPI_TYPE_BUFFER; obj->buffer.length = 12; diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index a25db514c719..324eb0cab19c 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -46,6 +46,12 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) buf[1] = 1; buf[2] = ACPI_PDC_C_CAPABILITY_SMP; + /* + * The default of PDC_SMP_T_SWCOORD bit is set for intel x86 cpu so + * that OSPM is capable of native ACPI throttling software + * coordination using BIOS supplied _TSD info. + */ + buf[2] |= ACPI_PDC_SMP_T_SWCOORD; if (cpu_has(c, X86_FEATURE_EST)) buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP; From 87654273ef63213f90c4243913987436495824f0 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 28 Jan 2008 13:53:30 +0800 Subject: [PATCH 065/112] ACPI : Check parameter when calling acpi_processor_get/set_throttling It is necessary to check the parameter when calling the function of acpi_processor_get/set_throttling function so as to avoid the NULL pointer reference in pr or throttling. http://bugzilla.kernel.org/show_bug.cgi?id=9747 Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 1685b40abda7..5d2eae207886 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -589,6 +589,11 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr) cpumask_t saved_mask; int ret; + if (!pr) + return -EINVAL; + + if (!pr->flags.throttling) + return -ENODEV; /* * Migrate task to the cpu pointed by pr. */ @@ -743,6 +748,16 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) { cpumask_t saved_mask; int ret; + + if (!pr) + return -EINVAL; + + if (!pr->flags.throttling) + return -ENODEV; + + if ((state < 0) || (state > (pr->throttling.state_count - 1))) + return -EINVAL; + /* * Migrate task to the cpu pointed by pr. */ From 1180509f6b3ec3ac2505375a78ccd72d270f2169 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 28 Jan 2008 13:53:42 +0800 Subject: [PATCH 066/112] ACPI : Update T-state coordination after getting _TSD info Accordint to ACPI spec, the _TSD object provides T-state control cross logical processor dependency information to OSPM. After the _TSD data for all cpus are obtained, OSPM will set up the T-state coordination between CPUs. Of course if the _TSD doesn't exist or _TSD data is incorrect , it is assumed that there is no T-state coordination and T-state is changed independently. Now there is no proper solution to update T-state coordination after one cpu is hotplugged. So this patch won't support hotplugged cpu very well. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 2 + drivers/acpi/processor_throttling.c | 180 +++++++++++++++++++++++++++- include/acpi/processor.h | 4 +- 3 files changed, 184 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e48ee4f8749f..b3b537342715 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -1061,6 +1061,8 @@ static int __init acpi_processor_init(void) acpi_processor_ppc_init(); + acpi_processor_throttling_init(); + return 0; out_cpuidle: diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 5d2eae207886..d6780f41d28c 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -48,6 +48,154 @@ ACPI_MODULE_NAME("processor_throttling"); static int acpi_processor_get_throttling(struct acpi_processor *pr); int acpi_processor_set_throttling(struct acpi_processor *pr, int state); +static int acpi_processor_update_tsd_coord(void) +{ + int count, count_target; + int retval = 0; + unsigned int i, j; + cpumask_t covered_cpus; + struct acpi_processor *pr, *match_pr; + struct acpi_tsd_package *pdomain, *match_pdomain; + struct acpi_processor_throttling *pthrottling, *match_pthrottling; + + /* + * Now that we have _TSD data from all CPUs, lets setup T-state + * coordination among all CPUs. + */ + for_each_possible_cpu(i) { + pr = processors[i]; + if (!pr) + continue; + + /* Basic validity check for domain info */ + pthrottling = &(pr->throttling); + + /* + * If tsd package for one cpu is invalid, the coordination + * among all CPUs is thought as invalid. + * Maybe it is ugly. + */ + if (!pthrottling->tsd_valid_flag) { + retval = -EINVAL; + break; + } + } + if (retval) + goto err_ret; + + cpus_clear(covered_cpus); + for_each_possible_cpu(i) { + pr = processors[i]; + if (!pr) + continue; + + if (cpu_isset(i, covered_cpus)) + continue; + pthrottling = &pr->throttling; + + pdomain = &(pthrottling->domain_info); + cpu_set(i, pthrottling->shared_cpu_map); + cpu_set(i, covered_cpus); + /* + * If the number of processor in the TSD domain is 1, it is + * unnecessary to parse the coordination for this CPU. + */ + if (pdomain->num_processors <= 1) + continue; + + /* Validate the Domain info */ + count_target = pdomain->num_processors; + count = 1; + + for_each_possible_cpu(j) { + if (i == j) + continue; + + match_pr = processors[j]; + if (!match_pr) + continue; + + match_pthrottling = &(match_pr->throttling); + match_pdomain = &(match_pthrottling->domain_info); + if (match_pdomain->domain != pdomain->domain) + continue; + + /* Here i and j are in the same domain. + * If two TSD packages have the same domain, they + * should have the same num_porcessors and + * coordination type. Otherwise it will be regarded + * as illegal. + */ + if (match_pdomain->num_processors != count_target) { + retval = -EINVAL; + goto err_ret; + } + + if (pdomain->coord_type != match_pdomain->coord_type) { + retval = -EINVAL; + goto err_ret; + } + + cpu_set(j, covered_cpus); + cpu_set(j, pthrottling->shared_cpu_map); + count++; + } + for_each_possible_cpu(j) { + if (i == j) + continue; + + match_pr = processors[j]; + if (!match_pr) + continue; + + match_pthrottling = &(match_pr->throttling); + match_pdomain = &(match_pthrottling->domain_info); + if (match_pdomain->domain != pdomain->domain) + continue; + + /* + * If some CPUS have the same domain, they + * will have the same shared_cpu_map. + */ + match_pthrottling->shared_cpu_map = + pthrottling->shared_cpu_map; + } + } + +err_ret: + for_each_possible_cpu(i) { + pr = processors[i]; + if (!pr) + continue; + + /* + * Assume no coordination on any error parsing domain info. + * The coordination type will be forced as SW_ALL. + */ + if (retval) { + pthrottling = &(pr->throttling); + cpus_clear(pthrottling->shared_cpu_map); + cpu_set(i, pthrottling->shared_cpu_map); + pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; + } + } + + return retval; +} + +/* + * Update the T-state coordination after the _TSD + * data for all cpus is obtained. + */ +void acpi_processor_throttling_init(void) +{ + if (acpi_processor_update_tsd_coord()) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Assume no T-state coordination\n")); + + return; +} + /* * _TPC - Throttling Present Capabilities */ @@ -293,6 +441,10 @@ static int acpi_processor_get_tsd(struct acpi_processor *pr) struct acpi_buffer state = { 0, NULL }; union acpi_object *tsd = NULL; struct acpi_tsd_package *pdomain; + struct acpi_processor_throttling *pthrottling; + + pthrottling = &pr->throttling; + pthrottling->tsd_valid_flag = 0; status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer); if (ACPI_FAILURE(status)) { @@ -340,6 +492,22 @@ static int acpi_processor_get_tsd(struct acpi_processor *pr) goto end; } + pthrottling = &pr->throttling; + pthrottling->tsd_valid_flag = 1; + pthrottling->shared_type = pdomain->coord_type; + cpu_set(pr->id, pthrottling->shared_cpu_map); + /* + * If the coordination type is not defined in ACPI spec, + * the tsd_valid_flag will be clear and coordination type + * will be forecd as DOMAIN_COORD_TYPE_SW_ALL. + */ + if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && + pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && + pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { + pthrottling->tsd_valid_flag = 0; + pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; + } + end: kfree(buffer.pointer); return result; @@ -772,6 +940,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) int acpi_processor_get_throttling_info(struct acpi_processor *pr) { int result = 0; + struct acpi_processor_throttling *pthrottling; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", @@ -803,7 +972,16 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) &acpi_processor_set_throttling_ptc; } - acpi_processor_get_tsd(pr); + /* + * If TSD package for one CPU can't be parsed successfully, it means + * that this CPU will have no coordination with other CPUs. + */ + if (acpi_processor_get_tsd(pr)) { + pthrottling = &pr->throttling; + pthrottling->tsd_valid_flag = 0; + cpu_set(pr->id, pthrottling->shared_cpu_map); + pthrottling->shared_type = DOMAIN_COORD_TYPE_SW_ALL; + } /* * PIIX4 Errata: We don't support throttling on the original PIIX4. diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 76411b1fc4fd..d90ad0d63c24 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -176,6 +176,8 @@ struct acpi_processor_throttling { u32 address; u8 duty_offset; u8 duty_width; + u8 tsd_valid_flag; + unsigned int shared_type; struct acpi_processor_tx states[ACPI_PROCESSOR_MAX_THROTTLING]; }; @@ -316,7 +318,7 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr) int acpi_processor_get_throttling_info(struct acpi_processor *pr); extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state); extern struct file_operations acpi_processor_throttling_fops; - +extern void acpi_processor_throttling_init(void); /* in processor_idle.c */ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device); From e4aa5cb2138e7423a6edef6a76a3837b94c2f107 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 28 Jan 2008 13:54:46 +0800 Subject: [PATCH 067/112] ACPI : Add T-state event notifier function The t-state coordination should be considered when T-state for one cpu is changed.It means that OSPM should select one proper target T-state for the all affected cpus before updating T-state. So the function of acpi_processor_throttling_notifier is added. Before updating T-state it can be called for all the affected cpus to get the proper target T-state, which can meet the requirement of thermal, user and _TPC. After updating T-state, it can be called to update T-state flag. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 72 +++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index d6780f41d28c..18a873a55256 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -45,6 +45,14 @@ #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); +struct throttling_tstate { + unsigned int cpu; /* cpu nr */ + int target_state; /* target T-state */ +}; + +#define THROTTLING_PRECHANGE (1) +#define THROTTLING_POSTCHANGE (2) + static int acpi_processor_get_throttling(struct acpi_processor *pr); int acpi_processor_set_throttling(struct acpi_processor *pr, int state); @@ -196,6 +204,70 @@ void acpi_processor_throttling_init(void) return; } +static int acpi_processor_throttling_notifier(unsigned long event, void *data) +{ + struct throttling_tstate *p_tstate = data; + struct acpi_processor *pr; + unsigned int cpu ; + int target_state; + struct acpi_processor_limit *p_limit; + struct acpi_processor_throttling *p_throttling; + + cpu = p_tstate->cpu; + pr = processors[cpu]; + if (!pr) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n")); + return 0; + } + if (!pr->flags.throttling) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Throttling control is " + "unsupported on CPU %d\n", cpu)); + return 0; + } + target_state = p_tstate->target_state; + p_throttling = &(pr->throttling); + switch (event) { + case THROTTLING_PRECHANGE: + /* + * Prechange event is used to choose one proper t-state, + * which meets the limits of thermal, user and _TPC. + */ + p_limit = &pr->limit; + if (p_limit->thermal.tx > target_state) + target_state = p_limit->thermal.tx; + if (p_limit->user.tx > target_state) + target_state = p_limit->user.tx; + if (pr->throttling_platform_limit > target_state) + target_state = pr->throttling_platform_limit; + if (target_state >= p_throttling->state_count) { + printk(KERN_WARNING + "Exceed the limit of T-state \n"); + target_state = p_throttling->state_count - 1; + } + p_tstate->target_state = target_state; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PreChange Event:" + "target T-state of CPU %d is T%d\n", + cpu, target_state)); + break; + case THROTTLING_POSTCHANGE: + /* + * Postchange event is only used to update the + * T-state flag of acpi_processor_throttling. + */ + p_throttling->state = target_state; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PostChange Event:" + "CPU %d is switched to T%d\n", + cpu, target_state)); + break; + default: + printk(KERN_WARNING + "Unsupported Throttling notifier event\n"); + break; + } + + return 0; +} + /* * _TPC - Throttling Present Capabilities */ From 33a2a529f7a2fb481812b99737176628fda457b0 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 28 Jan 2008 13:55:56 +0800 Subject: [PATCH 068/112] ACPI: Update the t-state for every affected cpu when t-state is changed According to ACPI spec, the _TSD object provides T-state control cross logical processor dependency information to OSPM. So the t-state coordination should be considered when T-state for one cpu is changed. According to ACPI spec, three types of coordination are defined. SW_ALL, SW_ANY and HW_ALL. SW_ALL: it means that OSPM needs to initiate T-state transition on all processors in the domain. It is necessary to call throttling set function for all affected cpus. SW_ANY: it means that OSPM may initiate T-state transition on any processor in the domain. HW_ALL: Spec only says that hardware will perform the coordination and doesn't recommend how OSPM coordinate T-state among the affected cpus. So it is treated as the type of SW_ALL. It means that OSPM needs to initiate t-state transition on all the processors in the domain. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 81 ++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 18a873a55256..86c790e9f4fc 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -68,7 +68,7 @@ static int acpi_processor_update_tsd_coord(void) /* * Now that we have _TSD data from all CPUs, lets setup T-state - * coordination among all CPUs. + * coordination between all CPUs. */ for_each_possible_cpu(i) { pr = processors[i]; @@ -988,6 +988,11 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) { cpumask_t saved_mask; int ret; + unsigned int i; + struct acpi_processor *match_pr; + struct acpi_processor_throttling *p_throttling; + struct throttling_tstate t_state; + cpumask_t online_throttling_cpus; if (!pr) return -EINVAL; @@ -998,12 +1003,76 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) if ((state < 0) || (state > (pr->throttling.state_count - 1))) return -EINVAL; - /* - * Migrate task to the cpu pointed by pr. - */ saved_mask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(pr->id)); - ret = pr->throttling.acpi_processor_set_throttling(pr, state); + t_state.target_state = state; + p_throttling = &(pr->throttling); + cpus_and(online_throttling_cpus, cpu_online_map, + p_throttling->shared_cpu_map); + /* + * The throttling notifier will be called for every + * affected cpu in order to get one proper T-state. + * The notifier event is THROTTLING_PRECHANGE. + */ + for_each_cpu_mask(i, online_throttling_cpus) { + t_state.cpu = i; + acpi_processor_throttling_notifier(THROTTLING_PRECHANGE, + &t_state); + } + /* + * The function of acpi_processor_set_throttling will be called + * to switch T-state. If the coordination type is SW_ALL or HW_ALL, + * it is necessary to call it for every affected cpu. Otherwise + * it can be called only for the cpu pointed by pr. + */ + if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) { + set_cpus_allowed(current, cpumask_of_cpu(pr->id)); + ret = p_throttling->acpi_processor_set_throttling(pr, + t_state.target_state); + } else { + /* + * When the T-state coordination is SW_ALL or HW_ALL, + * it is necessary to set T-state for every affected + * cpus. + */ + for_each_cpu_mask(i, online_throttling_cpus) { + match_pr = processors[i]; + /* + * If the pointer is invalid, we will report the + * error message and continue. + */ + if (!match_pr) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Invalid Pointer for CPU %d\n", i)); + continue; + } + /* + * If the throttling control is unsupported on CPU i, + * we will report the error message and continue. + */ + if (!match_pr->flags.throttling) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Throttling Controll is unsupported " + "on CPU %d\n", i)); + continue; + } + t_state.cpu = i; + set_cpus_allowed(current, cpumask_of_cpu(i)); + ret = match_pr->throttling. + acpi_processor_set_throttling( + match_pr, t_state.target_state); + } + } + /* + * After the set_throttling is called, the + * throttling notifier is called for every + * affected cpu to update the T-states. + * The notifier event is THROTTLING_POSTCHANGE + */ + for_each_cpu_mask(i, online_throttling_cpus) { + t_state.cpu = i; + acpi_processor_throttling_notifier(THROTTLING_POSTCHANGE, + &t_state); + } /* restore the previous state */ set_cpus_allowed(current, saved_mask); return ret; From 3391a76f2bbb74e42b9ba44c05a7366ffd388753 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 2 Feb 2008 03:56:18 -0500 Subject: [PATCH 069/112] ACPI: throttling: fix build warning Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 86c790e9f4fc..1b8e592a8241 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -987,7 +987,7 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, int acpi_processor_set_throttling(struct acpi_processor *pr, int state) { cpumask_t saved_mask; - int ret; + int ret = 0; unsigned int i; struct acpi_processor *match_pr; struct acpi_processor_throttling *p_throttling; From 3c602840528cf1aa835e6e32d76a0a45936b8e4c Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 2 Feb 2008 04:05:54 -0500 Subject: [PATCH 070/112] ACPI: fan: build fix for CONFIG_ACPI_PROCFS=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/acpi/fan.c:340: error: ‘acpi_fan_dir’ undeclared (first use in this function) Signed-off-by: Len Brown --- drivers/acpi/fan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index f6e8165c32e8..48cb705b274a 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -337,10 +337,12 @@ static int __init acpi_fan_init(void) int result = 0; +#ifdef CONFIG_ACPI_PROCFS acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir); if (!acpi_fan_dir) return -ENODEV; acpi_fan_dir->owner = THIS_MODULE; +#endif result = acpi_bus_register_driver(&acpi_fan_driver); if (result < 0) { From 8964ebb8c35533f4084cc667079a0ce620356104 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 25 Jan 2008 15:39:50 -0500 Subject: [PATCH 071/112] ACPI: remove redundant Acer blacklist entry dmi_check_system() does sub-string matching using strstr(), rather than exact string compares with !strcmp(). So delete the longer of the Acer blacklist entries, as its function is just a redundant console message. Spotted-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 8809654d6cc9..9ace2194f2ef 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -214,13 +214,11 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * _OSI(Linux) effect unknown: * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"), */ - { - .callback = dmi_disable_osi_linux, - .ident = "Acer, inc.", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer, inc."), - }, - }, + /* + * note that dmi_check_system() uses strstr() + * to match sub-strings rather than !strcmp(), + * so "Acer" below matches "Acer, inc." above. + */ /* * Disable OSI(Linux) warnings on all "Acer" * From e6298c6d60838495978cdbe5555dc290785bb961 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 25 Jan 2008 15:40:02 -0500 Subject: [PATCH 072/112] DMI: remove duplicate helper routine Use existing dmi_get_system_info(), Delete duplicate dmi_get_slot() Spotted-by: Wim Van Sebroeck Signed-off-by: Len Brown --- drivers/acpi/osl.c | 12 ++++++------ drivers/firmware/dmi_scan.c | 9 --------- include/linux/dmi.h | 2 -- 3 files changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e53fb516f9d4..347cda21c0ed 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1220,17 +1220,17 @@ int acpi_dmi_dump(void) return -1; printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n", - dmi_get_slot(DMI_SYS_VENDOR)); + dmi_get_system_info(DMI_SYS_VENDOR)); printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n", - dmi_get_slot(DMI_PRODUCT_NAME)); + dmi_get_system_info(DMI_PRODUCT_NAME)); printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n", - dmi_get_slot(DMI_PRODUCT_VERSION)); + dmi_get_system_info(DMI_PRODUCT_VERSION)); printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n", - dmi_get_slot(DMI_BOARD_NAME)); + dmi_get_system_info(DMI_BOARD_NAME)); printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n", - dmi_get_slot(DMI_BIOS_VENDOR)); + dmi_get_system_info(DMI_BIOS_VENDOR)); printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n", - dmi_get_slot(DMI_BIOS_DATE)); + dmi_get_system_info(DMI_BIOS_DATE)); return 0; } diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 9008ed5ef4ce..e0bade732376 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -489,12 +489,3 @@ int dmi_get_year(int field) return year; } - -/** - * dmi_get_slot - return dmi_ident[slot] - * @slot: index into dmi_ident[] - */ -char *dmi_get_slot(int slot) -{ - return(dmi_ident[slot]); -} diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 5b42a659a308..b1251b2af568 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -79,7 +79,6 @@ extern void dmi_scan_machine(void); extern int dmi_get_year(int field); extern int dmi_name_in_vendors(const char *str); extern int dmi_available; -extern char *dmi_get_slot(int slot); #else @@ -90,7 +89,6 @@ static inline const struct dmi_device * dmi_find_device(int type, const char *na static inline int dmi_get_year(int year) { return 0; } static inline int dmi_name_in_vendors(const char *s) { return 0; } #define dmi_available 0 -static inline char *dmi_get_slot(int slot) { return NULL; } #endif From d0280a02f7412f3fdd45fbd2f51f59d7d8a03fe8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sun, 3 Feb 2008 17:32:31 -0500 Subject: [PATCH 073/112] ACPI: update blacklist comments ...based on additional feedback -- no code change. Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 9ace2194f2ef..bd12c8e02c5f 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -208,7 +208,9 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * Disable OSI(Linux) warnings on all "Acer, inc." * * _OSI(Linux) disables the latest Windows BIOS code: + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"), * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"), * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"), * _OSI(Linux) effect unknown: @@ -223,7 +225,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * Disable OSI(Linux) warnings on all "Acer" * * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"), * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"), @@ -298,7 +300,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), }, }, - { /* OSI(Linux) touches USB, breaks suspend to disk */ + { /* OSI(Linux) touches USB, unknown side-effect */ .callback = dmi_disable_osi_linux, .ident = "Dell Dimension 5150", .matches = { @@ -472,6 +474,11 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * * _OSI(Linux) confirmed to be a NOP: * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"), + * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), + * + * unknown: + * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"), + * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), */ { .callback = dmi_disable_osi_linux, From 12d3931c1007a7ad47364a4884e5a6c6e25aa5e1 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jan 2008 00:10:12 +0200 Subject: [PATCH 074/112] ACPI: make acpi_dmi_dump() static Signed-off-by: Adrian Bunk Signed-off-by: Len Brown --- drivers/acpi/osl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 347cda21c0ed..71b0c32979f3 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1213,7 +1213,7 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) * * Returns 0 on success */ -int acpi_dmi_dump(void) +static int acpi_dmi_dump(void) { if (!dmi_available) From 1d15d84e8b443971cafd885d18f091814ba32cb7 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jan 2008 00:10:15 +0200 Subject: [PATCH 075/112] ACPI: make struct osi_linux static Signed-off-by: Adrian Bunk Signed-off-by: Len Brown --- drivers/acpi/osl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 71b0c32979f3..fde7ac82d611 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -120,7 +120,7 @@ static char osi_additional_string[OSI_STRING_LENGTH_MAX]; */ #define OSI_LINUX_ENABLE 0 -struct osi_linux { +static struct osi_linux { unsigned int enable:1; unsigned int dmi:1; unsigned int cmdline:1; From a64217b922e5a06f328e3962ff903ce829aff3d6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 4 Feb 2008 00:57:33 -0500 Subject: [PATCH 076/112] ACPI: blacklist update move some OSI(Linux) to "disable" from "unknown" to reduce dmesg lines that we don't really need. update Acer 5315 comment update Dell entries, add R200 entry update Apple entries Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index bd12c8e02c5f..6dbaa2d15fe0 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -70,8 +70,6 @@ static struct acpi_blacklist_item acpi_blacklist[] __initdata = { /* IBM 600E - _ADR should return 7, but it returns 1 */ {"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal, "Incorrect _ADR", 1}, - {"ASUS\0\0", "P2B-S ", 0, ACPI_SIG_DSDT, all_versions, - "Bogus PCI routing", 1}, {""} }; @@ -225,16 +223,18 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * Disable OSI(Linux) warnings on all "Acer" * * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"), * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"), * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"), * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"), * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"), + * + * _OSI(Linux) is a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), */ { - .callback = dmi_unknown_osi_linux, + .callback = dmi_disable_osi_linux, .ident = "Acer", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), @@ -242,21 +242,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, /* * Disable OSI(Linux) warnings on all "Apple Computer, Inc." + * Disable OSI(Linux) warnings on all "Apple Inc." * * _OSI(Linux) confirmed to be a NOP: * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"), * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"), + * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), * _OSI(Linux) effect unknown: * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"), * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), */ { .callback = dmi_disable_osi_linux, .ident = "Apple", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_SYS_VENDOR, "Apple"), }, }, /* @@ -294,7 +295,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * DMI_MATCH(DMI_BOARD_NAME, "IFL91"), */ { - .callback = dmi_unknown_osi_linux, + .callback = dmi_disable_osi_linux, .ident = "Compal", .matches = { DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), @@ -310,7 +311,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, { /* OSI(Linux) is a NOP */ .callback = dmi_disable_osi_linux, - .ident = "Dell", + .ident = "Dell i1501", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"), @@ -318,7 +319,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, { /* OSI(Linux) effect unknown */ .callback = dmi_unknown_osi_linux, - .ident = "Dell", + .ident = "Dell Latitude D830", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"), @@ -326,7 +327,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, { /* OSI(Linux) effect unknown */ .callback = dmi_unknown_osi_linux, - .ident = "Dell", + .ident = "Dell OP GX620", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"), @@ -334,15 +335,23 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, { /* OSI(Linux) effect unknown */ .callback = dmi_unknown_osi_linux, - .ident = "Dell", + .ident = "Dell PE 1900", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"), }, }, + { /* OSI(Linux) is a NOP */ + .callback = dmi_disable_osi_linux, + .ident = "Dell PE R200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"), + }, + }, { /* OSI(Linux) touches USB */ .callback = dmi_disable_osi_linux, - .ident = "Dell", + .ident = "Dell PR 390", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"), @@ -358,7 +367,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, { /* OSI(Linux) effect unknown */ .callback = dmi_unknown_osi_linux, - .ident = "Dell", + .ident = "Dell PE SC440", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"), @@ -521,7 +530,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"), */ { - .callback = dmi_unknown_osi_linux, + .callback = dmi_disable_osi_linux, .ident = "Sony", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), From bff431e49ff531a343fbb2b4426e313000844f32 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Tue, 5 Feb 2008 02:17:04 +0000 Subject: [PATCH 077/112] ACPI: WMI: Add ACPI-WMI mapping driver The following is an implementation of the Windows Management Instrumentation (WMI) ACPI interface mapper (PNP0C14). What it does: Parses the _WDG method and exports functions to process WMI method calls, data block query/ set commands (both based on GUID) and does basic event handling. How: WMI presents an in kernel interface here (essentially, a minimal wrapper around ACPI) (const char *guid assume the 36 character ASCII representation of a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB) wmi_evaluate_method(const char *guid, u8 instance, u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) wmi_query_block(const char *guid, u8 instance, struct acpi_buffer *out) wmi_set_block(const char *guid, u38 instance, const struct acpi_buffer *in) wmi_install_notify_handler(acpi_notify_handler handler); wmi_remove_notify_handler(void); wmi_get_event_data(u32 event, struct acpi_buffer *out) wmi_has_guid(const char guid*) wmi_has_guid() is a helper function to find if a GUID exists or not on the system (a quick and easy way for WMI dependant drivers to see if the the method/ block they want exists, since GUIDs are supposed to be unique). Event handling - allow a WMI based driver to register a notifier handler for each GUID with WMI. When a notification is sent to a GUID in WMI, the handler registered with WMI is then called (it is left to the caller to ask for the WMI event data associated with the GUID, if needed). What it won't do: Unicode - The MS article[1] calls for converting between ASCII and Unicode (or vice versa) if a GUID is marked as "string". This is left up to the calling driver. Handle a MOF[1] - the WMI mapper just exports methods, data and events to userspace. MOF handling is down to userspace. Userspace interface - this will be added later. [1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx === ChangeLog == v1 (2007-10-02): * Initial release v2 (2007-10-05): * Cleaned up code - split up super "wmi_evaluate_block" -> each external symbol now handles its own ACPI calls, rather than handing off to a "super" method (and in turn, is a lot simpler to read) * Added a find_guid() symbol - return true if a given GUID exists on the system * wmi_* functions now return type acpi_status (since they are just fancy wrappers around acpi_evaluate_object()) * Removed extra debug code v3 (2007-10-27) * More code clean up - now passes checkpatch.pl * Change data block calls - ref MS spec, method ID is not required for them, so drop it from the function parameters. * Const'ify guid in the function call parameters. * Fix _WDG buffer handling - copy the data to our own private structure. * Change WMI from tristate to bool - otherwise the external functions are not exported in linux/acpi.h if you try to build WMI as a module. * Fix more flag comparisons. * Add a maintainers entry - since I wrote this, I should take the blame for it. v4 (2007-10-30) * Add missing brace from after fixing checkpatch errors. * Rewrote event handling - allow external drivers to register with WMI to handle WMI events * Clean up flags and sanitise flag handling v5 (2007-11-03) * Add sysfs interface for userspace. Export events over netlink again. * Remove module left overs, fully convert to built-in driver. * Tweak in-kernel API to use u8 for instance, since this is what the GUID blocks use (so instance cannot be greater than u8). * Export wmi_get_event_data() for in kernel WMI drivers. v6 (2007-11-07) * Split out userspace into a different patch v7 (2007-11-20) * Fix driver to handle multiple PNP0C14 devices - store all GUIDs using the kernel's built in list functions, and just keep adding to the list every time we handle a PNP0C14 devices - GUIDs will always be unique, and WMI callers do not know or care about different devices. * Change WMI event handler registration to use its' own event handling struct; we should not pass an acpi_handle down to any WMI based drivers - they should be able to function with only the calls provided in WMI. * Update my e-mail address v8 (2007-11-28) * Convert back to a module. * Update Kconfig to default to building as a module. * Remove an erroneous printk. * Simply comments for string flag (since we now leave the handling to the caller). v9 (2007-12-07) * Add back missing MODULE_DEVICE_TABLE for autoloading * Checkpatch fixes v10 (2007-12-12) * Workaround broken GUIDs declared expensive without a WCxx method. * Minor cleanups v11 (2007-12-17) * More fixing for broken GUIDs declared expensive without a WCxx method. * Add basic EmbeddedControl region handling. v12 (2007-12-18) * Changed EC region handling code, as per Alexey's comments. v13 (2007-12-27) * Changed event handling so that we can have one event handler registered per GUID, as per Matthew Garrett's suggestion. v14 (2008-01-12) * Remove ACPI debug statements v15 (2008-02-01) * Replace two remaining 'x == NULL' type tests with '!x' v16 (2008-02-05) * Change MAINTAINERS entry, as I am not, and never have been, paid to work on WMI * Remove 'default' line from Kconfig Signed-off-by: Carlos Corbacho CC: Matthew Garrett CC: Alexey Starikovskiy Signed-off-by: Len Brown --- MAINTAINERS | 7 + drivers/acpi/Kconfig | 10 + drivers/acpi/Makefile | 1 + drivers/acpi/wmi.c | 710 ++++++++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 20 ++ 5 files changed, 748 insertions(+) create mode 100644 drivers/acpi/wmi.c diff --git a/MAINTAINERS b/MAINTAINERS index da30a72a839c..12e26d772e7d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -252,6 +252,13 @@ L: linux-acpi@vger.kernel.org W: http://acpi.sourceforge.net/ S: Supported +ACPI WMI DRIVER +P: Carlos Corbacho +M: carlos@strangeworlds.co.uk +L: linux-acpi@vger.kernel.org +W: http://www.lesswatts.org/projects/acpi/ +S: Maintained + ADM1025 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ccf6ea95f68c..f60cf6fea2bb 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -199,6 +199,16 @@ config ACPI_NUMA depends on (X86 || IA64) default y if IA64_GENERIC || IA64_SGI_SN2 +config ACPI_WMI + tristate "WMI (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + This driver adds support for the ACPI-WMI mapper device (PNP0C14) + found on some systems. + + NOTE: You will need another driver or userspace application on top of + this to actually use anything defined in the ACPI-WMI mapper. + config ACPI_ASUS tristate "ASUS/Medion Laptop Extras" depends on X86 diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 456446f90077..f29812a86533 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_ACPI_THERMAL) += thermal.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o +obj-$(CONFIG_ACPI_WMI) += wmi.o obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c new file mode 100644 index 000000000000..36b84ab418dd --- /dev/null +++ b/drivers/acpi/wmi.c @@ -0,0 +1,710 @@ +/* + * ACPI-WMI mapping driver + * + * Copyright (C) 2007-2008 Carlos Corbacho + * + * GUID parsing code from ldm.c is: + * Copyright (C) 2001,2002 Richard Russon + * Copyright (c) 2001-2007 Anton Altaparmakov + * Copyright (C) 2001,2002 Jakob Kemi + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include + +ACPI_MODULE_NAME("wmi"); +MODULE_AUTHOR("Carlos Corbacho"); +MODULE_DESCRIPTION("ACPI-WMI Mapping Driver"); +MODULE_LICENSE("GPL"); + +#define ACPI_WMI_CLASS "wmi" + +#undef PREFIX +#define PREFIX "ACPI: WMI: " + +static DEFINE_MUTEX(wmi_data_lock); + +struct guid_block { + char guid[16]; + union { + char object_id[2]; + struct { + unsigned char notify_id; + unsigned char reserved; + }; + }; + u8 instance_count; + u8 flags; +}; + +struct wmi_block { + struct list_head list; + struct guid_block gblock; + acpi_handle handle; + wmi_notify_handler handler; + void *handler_data; +}; + +static struct wmi_block wmi_blocks; + +/* + * If the GUID data block is marked as expensive, we must enable and + * explicitily disable data collection. + */ +#define ACPI_WMI_EXPENSIVE 0x1 +#define ACPI_WMI_METHOD 0x2 /* GUID is a method */ +#define ACPI_WMI_STRING 0x4 /* GUID takes & returns a string */ +#define ACPI_WMI_EVENT 0x8 /* GUID is an event */ + +static int acpi_wmi_remove(struct acpi_device *device, int type); +static int acpi_wmi_add(struct acpi_device *device); + +static const struct acpi_device_id wmi_device_ids[] = { + {"PNP0C14", 0}, + {"pnp0c14", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, wmi_device_ids); + +static struct acpi_driver acpi_wmi_driver = { + .name = "wmi", + .class = ACPI_WMI_CLASS, + .ids = wmi_device_ids, + .ops = { + .add = acpi_wmi_add, + .remove = acpi_wmi_remove, + }, +}; + +/* + * GUID parsing functions + */ + +/** + * wmi_parse_hexbyte - Convert a ASCII hex number to a byte + * @src: Pointer to at least 2 characters to convert. + * + * Convert a two character ASCII hex string to a number. + * + * Return: 0-255 Success, the byte was parsed correctly + * -1 Error, an invalid character was supplied + */ +static int wmi_parse_hexbyte(const u8 *src) +{ + unsigned int x; /* For correct wrapping */ + int h; + + /* high part */ + x = src[0]; + if (x - '0' <= '9' - '0') { + h = x - '0'; + } else if (x - 'a' <= 'f' - 'a') { + h = x - 'a' + 10; + } else if (x - 'A' <= 'F' - 'A') { + h = x - 'A' + 10; + } else { + return -1; + } + h <<= 4; + + /* low part */ + x = src[1]; + if (x - '0' <= '9' - '0') + return h | (x - '0'); + if (x - 'a' <= 'f' - 'a') + return h | (x - 'a' + 10); + if (x - 'A' <= 'F' - 'A') + return h | (x - 'A' + 10); + return -1; +} + +/** + * wmi_swap_bytes - Rearrange GUID bytes to match GUID binary + * @src: Memory block holding binary GUID (16 bytes) + * @dest: Memory block to hold byte swapped binary GUID (16 bytes) + * + * Byte swap a binary GUID to match it's real GUID value + */ +static void wmi_swap_bytes(u8 *src, u8 *dest) +{ + int i; + + for (i = 0; i <= 3; i++) + memcpy(dest + i, src + (3 - i), 1); + + for (i = 0; i <= 1; i++) + memcpy(dest + 4 + i, src + (5 - i), 1); + + for (i = 0; i <= 1; i++) + memcpy(dest + 6 + i, src + (7 - i), 1); + + memcpy(dest + 8, src + 8, 8); +} + +/** + * wmi_parse_guid - Convert GUID from ASCII to binary + * @src: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba + * @dest: Memory block to hold binary GUID (16 bytes) + * + * N.B. The GUID need not be NULL terminated. + * + * Return: 'true' @dest contains binary GUID + * 'false' @dest contents are undefined + */ +static bool wmi_parse_guid(const u8 *src, u8 *dest) +{ + static const int size[] = { 4, 2, 2, 2, 6 }; + int i, j, v; + + if (src[8] != '-' || src[13] != '-' || + src[18] != '-' || src[23] != '-') + return false; + + for (j = 0; j < 5; j++, src++) { + for (i = 0; i < size[j]; i++, src += 2, *dest++ = v) { + v = wmi_parse_hexbyte(src); + if (v < 0) + return false; + } + } + + return true; +} + +static bool find_guid(const char *guid_string, struct wmi_block **out) +{ + char tmp[16], guid_input[16]; + struct wmi_block *wblock; + struct guid_block *block; + struct list_head *p; + + wmi_parse_guid(guid_string, tmp); + wmi_swap_bytes(tmp, guid_input); + + list_for_each(p, &wmi_blocks.list) { + wblock = list_entry(p, struct wmi_block, list); + block = &wblock->gblock; + + if (memcmp(block->guid, guid_input, 16) == 0) { + if (out) + *out = wblock; + return 1; + } + } + return 0; +} + +/* + * Exported WMI functions + */ +/** + * wmi_evaluate_method - Evaluate a WMI method + * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba + * @instance: Instance index + * @method_id: Method ID to call + * &in: Buffer containing input for the method call + * &out: Empty buffer to return the method results + * + * Call an ACPI-WMI method + */ +acpi_status wmi_evaluate_method(const char *guid_string, u8 instance, +u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) +{ + struct guid_block *block = NULL; + struct wmi_block *wblock = NULL; + acpi_handle handle; + acpi_status status; + struct acpi_object_list input; + union acpi_object params[3]; + char method[4] = "WM"; + + if (!find_guid(guid_string, &wblock)) + return AE_BAD_ADDRESS; + + block = &wblock->gblock; + handle = wblock->handle; + + if (!block->flags & ACPI_WMI_METHOD) + return AE_BAD_DATA; + + if (block->instance_count < instance) + return AE_BAD_PARAMETER; + + input.count = 2; + input.pointer = params; + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = instance; + params[1].type = ACPI_TYPE_INTEGER; + params[1].integer.value = method_id; + + if (in) { + input.count = 3; + + if (block->flags & ACPI_WMI_STRING) { + params[2].type = ACPI_TYPE_STRING; + } else { + params[2].type = ACPI_TYPE_BUFFER; + } + params[2].buffer.length = in->length; + params[2].buffer.pointer = in->pointer; + } + + strncat(method, block->object_id, 2); + + status = acpi_evaluate_object(handle, method, &input, out); + + return status; +} +EXPORT_SYMBOL_GPL(wmi_evaluate_method); + +/** + * wmi_query_block - Return contents of a WMI block + * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba + * @instance: Instance index + * &out: Empty buffer to return the contents of the data block to + * + * Return the contents of an ACPI-WMI data block to a buffer + */ +acpi_status wmi_query_block(const char *guid_string, u8 instance, +struct acpi_buffer *out) +{ + struct guid_block *block = NULL; + struct wmi_block *wblock = NULL; + acpi_handle handle; + acpi_status status, wc_status = AE_ERROR; + struct acpi_object_list input, wc_input; + union acpi_object wc_params[1], wq_params[1]; + char method[4]; + char wc_method[4] = "WC"; + + if (!guid_string || !out) + return AE_BAD_PARAMETER; + + if (!find_guid(guid_string, &wblock)) + return AE_BAD_ADDRESS; + + block = &wblock->gblock; + handle = wblock->handle; + + if (block->instance_count < instance) + return AE_BAD_PARAMETER; + + /* Check GUID is a data block */ + if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD)) + return AE_BAD_ADDRESS; + + input.count = 1; + input.pointer = wq_params; + wq_params[0].type = ACPI_TYPE_INTEGER; + wq_params[0].integer.value = instance; + + /* + * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method first to + * enable collection. + */ + if (block->flags & ACPI_WMI_EXPENSIVE) { + wc_input.count = 1; + wc_input.pointer = wc_params; + wc_params[0].type = ACPI_TYPE_INTEGER; + wc_params[0].integer.value = 1; + + strncat(wc_method, block->object_id, 2); + + /* + * Some GUIDs break the specification by declaring themselves + * expensive, but have no corresponding WCxx method. So we + * should not fail if this happens. + */ + wc_status = acpi_evaluate_object(handle, wc_method, + &wc_input, NULL); + } + + strcpy(method, "WQ"); + strncat(method, block->object_id, 2); + + status = acpi_evaluate_object(handle, method, NULL, out); + + /* + * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if + * the WQxx method failed - we should disable collection anyway. + */ + if ((block->flags & ACPI_WMI_EXPENSIVE) && wc_status) { + wc_params[0].integer.value = 0; + status = acpi_evaluate_object(handle, + wc_method, &wc_input, NULL); + } + + return status; +} +EXPORT_SYMBOL_GPL(wmi_query_block); + +/** + * wmi_set_block - Write to a WMI block + * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba + * @instance: Instance index + * &in: Buffer containing new values for the data block + * + * Write the contents of the input buffer to an ACPI-WMI data block + */ +acpi_status wmi_set_block(const char *guid_string, u8 instance, +const struct acpi_buffer *in) +{ + struct guid_block *block = NULL; + struct wmi_block *wblock = NULL; + acpi_handle handle; + struct acpi_object_list input; + union acpi_object params[2]; + char method[4] = "WS"; + + if (!guid_string || !in) + return AE_BAD_DATA; + + if (!find_guid(guid_string, &wblock)) + return AE_BAD_ADDRESS; + + block = &wblock->gblock; + handle = wblock->handle; + + if (block->instance_count < instance) + return AE_BAD_PARAMETER; + + /* Check GUID is a data block */ + if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD)) + return AE_BAD_ADDRESS; + + input.count = 2; + input.pointer = params; + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = instance; + + if (block->flags & ACPI_WMI_STRING) { + params[1].type = ACPI_TYPE_STRING; + } else { + params[1].type = ACPI_TYPE_BUFFER; + } + params[1].buffer.length = in->length; + params[1].buffer.pointer = in->pointer; + + strncat(method, block->object_id, 2); + + return acpi_evaluate_object(handle, method, &input, NULL); +} +EXPORT_SYMBOL_GPL(wmi_set_block); + +/** + * wmi_install_notify_handler - Register handler for WMI events + * @handler: Function to handle notifications + * @data: Data to be returned to handler when event is fired + * + * Register a handler for events sent to the ACPI-WMI mapper device. + */ +acpi_status wmi_install_notify_handler(const char *guid, +wmi_notify_handler handler, void *data) +{ + struct wmi_block *block; + + if (!guid || !handler) + return AE_BAD_PARAMETER; + + find_guid(guid, &block); + if (!block) + return AE_NOT_EXIST; + + if (block->handler) + return AE_ALREADY_ACQUIRED; + + block->handler = handler; + block->handler_data = data; + + return AE_OK; +} +EXPORT_SYMBOL_GPL(wmi_install_notify_handler); + +/** + * wmi_uninstall_notify_handler - Unregister handler for WMI events + * + * Unregister handler for events sent to the ACPI-WMI mapper device. + */ +acpi_status wmi_remove_notify_handler(const char *guid) +{ + struct wmi_block *block; + + if (!guid) + return AE_BAD_PARAMETER; + + find_guid(guid, &block); + if (!block) + return AE_NOT_EXIST; + + if (!block->handler) + return AE_NULL_ENTRY; + + block->handler = NULL; + block->handler_data = NULL; + + return AE_OK; +} +EXPORT_SYMBOL_GPL(wmi_remove_notify_handler); + +/** + * wmi_get_event_data - Get WMI data associated with an event + * + * @event - Event to find + * &out - Buffer to hold event data + * + * Returns extra data associated with an event in WMI. + */ +acpi_status wmi_get_event_data(u32 event, struct acpi_buffer *out) +{ + struct acpi_object_list input; + union acpi_object params[1]; + struct guid_block *gblock; + struct wmi_block *wblock; + struct list_head *p; + + input.count = 1; + input.pointer = params; + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = event; + + list_for_each(p, &wmi_blocks.list) { + wblock = list_entry(p, struct wmi_block, list); + gblock = &wblock->gblock; + + if ((gblock->flags & ACPI_WMI_EVENT) && + (gblock->notify_id == event)) + return acpi_evaluate_object(wblock->handle, "_WED", + &input, out); + } + + return AE_NOT_FOUND; +} +EXPORT_SYMBOL_GPL(wmi_get_event_data); + +/** + * wmi_has_guid - Check if a GUID is available + * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba + * + * Check if a given GUID is defined by _WDG + */ +bool wmi_has_guid(const char *guid_string) +{ + return find_guid(guid_string, NULL); +} +EXPORT_SYMBOL_GPL(wmi_has_guid); + +/* + * Parse the _WDG method for the GUID data blocks + */ +static __init acpi_status parse_wdg(acpi_handle handle) +{ + struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *obj; + struct guid_block *gblock; + struct wmi_block *wblock; + acpi_status status; + u32 i, total; + + status = acpi_evaluate_object(handle, "_WDG", NULL, &out); + + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *) out.pointer; + + if (obj->type != ACPI_TYPE_BUFFER) + return AE_ERROR; + + total = obj->buffer.length / sizeof(struct guid_block); + + gblock = kzalloc(obj->buffer.length, GFP_KERNEL); + if (!gblock) + return AE_NO_MEMORY; + + memcpy(gblock, obj->buffer.pointer, obj->buffer.length); + + for (i = 0; i < total; i++) { + wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL); + if (!wblock) + return AE_NO_MEMORY; + + wblock->gblock = gblock[i]; + wblock->handle = handle; + list_add_tail(&wblock->list, &wmi_blocks.list); + } + + kfree(out.pointer); + kfree(gblock); + + return status; +} + +/* + * WMI can have EmbeddedControl access regions. In which case, we just want to + * hand these off to the EC driver. + */ +static acpi_status +acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, + u32 bits, acpi_integer * value, + void *handler_context, void *region_context) +{ + int result = 0, i = 0; + u8 temp = 0; + + if ((address > 0xFF) || !value) + return AE_BAD_PARAMETER; + + if (function != ACPI_READ && function != ACPI_WRITE) + return AE_BAD_PARAMETER; + + if (bits != 8) + return AE_BAD_PARAMETER; + + if (function == ACPI_READ) { + result = ec_read(address, &temp); + (*value) |= ((acpi_integer)temp) << i; + } else { + temp = 0xff & ((*value) >> i); + result = ec_write(address, temp); + } + + switch (result) { + case -EINVAL: + return AE_BAD_PARAMETER; + break; + case -ENODEV: + return AE_NOT_FOUND; + break; + case -ETIME: + return AE_TIME; + break; + default: + return AE_OK; + } +} + +static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) +{ + struct guid_block *block; + struct wmi_block *wblock; + struct list_head *p; + struct acpi_device *device = data; + + list_for_each(p, &wmi_blocks.list) { + wblock = list_entry(p, struct wmi_block, list); + block = &wblock->gblock; + + if ((block->flags & ACPI_WMI_EVENT) && + (block->notify_id == event)) { + if (wblock->handler) + wblock->handler(event, wblock->handler_data); + + acpi_bus_generate_netlink_event( + device->pnp.device_class, device->dev.bus_id, + event, 0); + break; + } + } +} + +static int acpi_wmi_remove(struct acpi_device *device, int type) +{ + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_wmi_notify); + + acpi_remove_address_space_handler(device->handle, + ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler); + + return 0; +} + +static int __init acpi_wmi_add(struct acpi_device *device) +{ + acpi_status status; + int result = 0; + + status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_wmi_notify, device); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR PREFIX "Error installing notify handler\n"); + return -ENODEV; + } + + status = acpi_install_address_space_handler(device->handle, + ACPI_ADR_SPACE_EC, + &acpi_wmi_ec_space_handler, + NULL, NULL); + if (ACPI_FAILURE(status)) + return -ENODEV; + + status = parse_wdg(device->handle); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR PREFIX "Error installing EC region handler\n"); + return -ENODEV; + } + + return result; +} + +static int __init acpi_wmi_init(void) +{ + acpi_status result; + + if (acpi_disabled) + return -ENODEV; + + INIT_LIST_HEAD(&wmi_blocks.list); + + result = acpi_bus_register_driver(&acpi_wmi_driver); + + if (result < 0) { + printk(KERN_INFO PREFIX "Error loading mapper\n"); + } else { + printk(KERN_INFO PREFIX "Mapper loaded\n"); + } + + return result; +} + +static void __exit acpi_wmi_exit(void) +{ + struct list_head *p, *tmp; + struct wmi_block *wblock; + + acpi_bus_unregister_driver(&acpi_wmi_driver); + + list_for_each_safe(p, tmp, &wmi_blocks.list) { + wblock = list_entry(p, struct wmi_block, list); + + list_del(p); + kfree(wblock); + } + + printk(KERN_INFO PREFIX "Mapper unloaded\n"); +} + +subsys_initcall(acpi_wmi_init); +module_exit(acpi_wmi_exit); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 63f2e6ed698f..fab9f70fe39d 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -192,6 +192,26 @@ extern int ec_transaction(u8 command, #endif /*CONFIG_ACPI_EC*/ +#if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) + +typedef void (*wmi_notify_handler) (u32 value, void *context); + +extern acpi_status wmi_evaluate_method(const char *guid, u8 instance, + u32 method_id, + const struct acpi_buffer *in, + struct acpi_buffer *out); +extern acpi_status wmi_query_block(const char *guid, u8 instance, + struct acpi_buffer *out); +extern acpi_status wmi_set_block(const char *guid, u8 instance, + const struct acpi_buffer *in); +extern acpi_status wmi_install_notify_handler(const char *guid, + wmi_notify_handler handler, void *data); +extern acpi_status wmi_remove_notify_handler(const char *guid); +extern acpi_status wmi_get_event_data(u32 event, struct acpi_buffer *out); +extern bool wmi_has_guid(const char *guid); + +#endif /* CONFIG_ACPI_WMI */ + extern int acpi_blacklisted(void); #ifdef CONFIG_DMI extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); From 745a5d2126926808295742932d0e36d485efa485 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Tue, 5 Feb 2008 02:17:10 +0000 Subject: [PATCH 078/112] acer-wmi: Add driver for newer Acer laptops This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. v1: * Initial release v2: * Replace left over ACPI references with WMI * Add GUID based autoloading (depends on future work to WMI) * Add DMI based autoloading (backup solution until WMI sysfs/ class work is available) * Checkpatch fixes v3: * Add new EC quirks for Aspire 3100 & 5100, and Extensa 5220 v4: * Simplified internal handling of WMID and AMW0 devices * Add autodetection for bluetooth and maximum brightness on AMW0 V2 and WMID laptops. v5: * Add EC quirk for Medion MD 98000 * Add autodetection for AMW0, and mail LED on AMW0 and AMW0 V2. * Improve error handling * Fix AMW0 V2 bluetooth and wireless, by using both WMID and AMW0 methods to ensure that the correct value is always set. v6: * Fix 'use before initialisation' bug with quirks. v7 * Fix bug on AMW0 where acer-wmi would exit if a mail LED was not detected. * Add Acer Aspire 9110 mail LED support * Fix section mismatch warnings Signed-off-by: Carlos Corbacho CC: Matthew Garrett Signed-off-by: Len Brown --- MAINTAINERS | 7 + drivers/misc/Kconfig | 16 + drivers/misc/Makefile | 1 + drivers/misc/acer-wmi.c | 1109 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 1133 insertions(+) create mode 100644 drivers/misc/acer-wmi.c diff --git a/MAINTAINERS b/MAINTAINERS index 12e26d772e7d..2eaeef4b2fb9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -202,6 +202,13 @@ L: linux-scsi@vger.kernel.org W: http://www.adaptec.com/ S: Supported +ACER WMI LAPTOP EXTRAS +P: Carlos Corbacho +M: carlos@strangeworlds.co.uk +L: aceracpi@googlegroups.com (subscribers-only) +W: http://code.google.com/p/aceracpi +S: Maintained + ACPI P: Len Brown M: len.brown@intel.com diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b5e67c0ff433..35d2c22c5d24 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -92,6 +92,22 @@ config TIFM_7XX1 To compile this driver as a module, choose M here: the module will be called tifm_7xx1. +config ACER_WMI + tristate "Acer WMI Laptop Extras (EXPERIMENTAL)" + depends on X86 + depends on EXPERIMENTAL + depends on ACPI + depends on ACPI_WMI + depends on LEDS_CLASS + depends on BACKLIGHT_CLASS_DEVICE + ---help--- + This is a driver for newer Acer (and Wistron) laptops. It adds + wireless radio and bluetooth control, and on some laptops, + exposes the mail LED and LCD backlight. + + If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M + here. + config ASUS_LAPTOP tristate "Asus Laptop Extras (EXPERIMENTAL)" depends on X86 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 87f2685d728f..3da1491f662c 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -6,6 +6,7 @@ obj- := misc.o # Dummy rule to force built-in.o to be made obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o +obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_LKDTM) += lkdtm.o diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c new file mode 100644 index 000000000000..a4d677504250 --- /dev/null +++ b/drivers/misc/acer-wmi.c @@ -0,0 +1,1109 @@ +/* + * Acer WMI Laptop Extras + * + * Copyright (C) 2007-2008 Carlos Corbacho + * + * Based on acer_acpi: + * Copyright (C) 2005-2007 E.M. Smith + * Copyright (C) 2007-2008 Carlos Corbacho + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define ACER_WMI_VERSION "0.1" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +MODULE_AUTHOR("Carlos Corbacho"); +MODULE_DESCRIPTION("Acer Laptop WMI Extras Driver"); +MODULE_LICENSE("GPL"); + +#define ACER_LOGPREFIX "acer-wmi: " +#define ACER_ERR KERN_ERR ACER_LOGPREFIX +#define ACER_NOTICE KERN_NOTICE ACER_LOGPREFIX +#define ACER_INFO KERN_INFO ACER_LOGPREFIX + +/* + * The following defines quirks to get some specific functions to work + * which are known to not be supported over ACPI-WMI (such as the mail LED + * on WMID based Acer's) + */ +struct acer_quirks { + const char *vendor; + const char *model; + u16 quirks; +}; + +/* + * Magic Number + * Meaning is unknown - this number is required for writing to ACPI for AMW0 + * (it's also used in acerhk when directly accessing the BIOS) + */ +#define ACER_AMW0_WRITE 0x9610 + +/* + * Bit masks for the AMW0 interface + */ +#define ACER_AMW0_WIRELESS_MASK 0x35 +#define ACER_AMW0_BLUETOOTH_MASK 0x34 +#define ACER_AMW0_MAILLED_MASK 0x31 + +/* + * Method IDs for WMID interface + */ +#define ACER_WMID_GET_WIRELESS_METHODID 1 +#define ACER_WMID_GET_BLUETOOTH_METHODID 2 +#define ACER_WMID_GET_BRIGHTNESS_METHODID 3 +#define ACER_WMID_SET_WIRELESS_METHODID 4 +#define ACER_WMID_SET_BLUETOOTH_METHODID 5 +#define ACER_WMID_SET_BRIGHTNESS_METHODID 6 +#define ACER_WMID_GET_THREEG_METHODID 10 +#define ACER_WMID_SET_THREEG_METHODID 11 + +/* + * Acer ACPI method GUIDs + */ +#define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB" +#define WMID_GUID1 "6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3" +#define WMID_GUID2 "95764E09-FB56-4e83-B31A-37761F60994A" + +MODULE_ALIAS("wmi:67C3371D-95A3-4C37-BB61-DD47B491DAAB"); +MODULE_ALIAS("wmi:6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"); + +/* Temporary workaround until the WMI sysfs interface goes in */ +MODULE_ALIAS("dmi:*:*Acer*:*:"); + +/* + * Interface capability flags + */ +#define ACER_CAP_MAILLED (1<<0) +#define ACER_CAP_WIRELESS (1<<1) +#define ACER_CAP_BLUETOOTH (1<<2) +#define ACER_CAP_BRIGHTNESS (1<<3) +#define ACER_CAP_THREEG (1<<4) +#define ACER_CAP_ANY (0xFFFFFFFF) + +/* + * Interface type flags + */ +enum interface_flags { + ACER_AMW0, + ACER_AMW0_V2, + ACER_WMID, +}; + +#define ACER_DEFAULT_WIRELESS 0 +#define ACER_DEFAULT_BLUETOOTH 0 +#define ACER_DEFAULT_MAILLED 0 +#define ACER_DEFAULT_THREEG 0 + +static int max_brightness = 0xF; + +static int wireless = -1; +static int bluetooth = -1; +static int mailled = -1; +static int brightness = -1; +static int threeg = -1; +static int force_series; + +module_param(mailled, int, 0444); +module_param(wireless, int, 0444); +module_param(bluetooth, int, 0444); +module_param(brightness, int, 0444); +module_param(threeg, int, 0444); +module_param(force_series, int, 0444); +MODULE_PARM_DESC(wireless, "Set initial state of Wireless hardware"); +MODULE_PARM_DESC(bluetooth, "Set initial state of Bluetooth hardware"); +MODULE_PARM_DESC(mailled, "Set initial state of Mail LED"); +MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness"); +MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware"); +MODULE_PARM_DESC(force_series, "Force a different laptop series"); + +struct acer_data { + int mailled; + int wireless; + int bluetooth; + int threeg; + int brightness; +}; + +/* Each low-level interface must define at least some of the following */ +struct wmi_interface { + /* The WMI device type */ + u32 type; + + /* The capabilities this interface provides */ + u32 capability; + + /* Private data for the current interface */ + struct acer_data data; +}; + +/* The static interface pointer, points to the currently detected interface */ +static struct wmi_interface *interface; + +/* + * Embedded Controller quirks + * Some laptops require us to directly access the EC to either enable or query + * features that are not available through WMI. + */ + +struct quirk_entry { + u8 wireless; + u8 mailled; + u8 brightness; + u8 bluetooth; +}; + +static struct quirk_entry *quirks; + +static void set_quirks(void) +{ + if (quirks->mailled) + interface->capability |= ACER_CAP_MAILLED; + + if (quirks->brightness) + interface->capability |= ACER_CAP_BRIGHTNESS; +} + +static int dmi_matched(const struct dmi_system_id *dmi) +{ + quirks = dmi->driver_data; + return 0; +} + +static struct quirk_entry quirk_unknown = { +}; + +static struct quirk_entry quirk_acer_travelmate_2490 = { + .mailled = 1, +}; + +/* This AMW0 laptop has no bluetooth */ +static struct quirk_entry quirk_medion_md_98300 = { + .wireless = 1, +}; + +static struct dmi_system_id acer_quirks[] = { + { + .callback = dmi_matched, + .ident = "Acer Aspire 3100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Acer Aspire 5100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Acer Aspire 5630", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Acer Aspire 5650", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Acer Aspire 5680", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Acer Aspire 9110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Acer TravelMate 2490", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, + .ident = "Medion MD 98300", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "WAM2030"), + }, + .driver_data = &quirk_medion_md_98300, + }, + {} +}; + +/* Find which quirks are needed for a particular vendor/ model pair */ +static void find_quirks(void) +{ + if (!force_series) { + dmi_check_system(acer_quirks); + } else if (force_series == 2490) { + quirks = &quirk_acer_travelmate_2490; + } + + if (quirks == NULL) + quirks = &quirk_unknown; + + set_quirks(); +} + +/* + * General interface convenience methods + */ + +static bool has_cap(u32 cap) +{ + if ((interface->capability & cap) != 0) + return 1; + + return 0; +} + +/* + * AMW0 (V1) interface + */ +struct wmab_args { + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; +}; + +struct wmab_ret { + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; + u32 eex; +}; + +static acpi_status wmab_execute(struct wmab_args *regbuf, +struct acpi_buffer *result) +{ + struct acpi_buffer input; + acpi_status status; + input.length = sizeof(struct wmab_args); + input.pointer = (u8 *)regbuf; + + status = wmi_evaluate_method(AMW0_GUID1, 1, 1, &input, result); + + return status; +} + +static acpi_status AMW0_get_u32(u32 *value, u32 cap, +struct wmi_interface *iface) +{ + int err; + u8 result; + + switch (cap) { + case ACER_CAP_MAILLED: + switch (quirks->mailled) { + default: + err = ec_read(0xA, &result); + if (err) + return AE_ERROR; + *value = (result >> 7) & 0x1; + return AE_OK; + } + break; + case ACER_CAP_WIRELESS: + switch (quirks->wireless) { + case 1: + err = ec_read(0x7B, &result); + if (err) + return AE_ERROR; + *value = result & 0x1; + return AE_OK; + default: + err = ec_read(0xA, &result); + if (err) + return AE_ERROR; + *value = (result >> 2) & 0x1; + return AE_OK; + } + break; + case ACER_CAP_BLUETOOTH: + switch (quirks->bluetooth) { + default: + err = ec_read(0xA, &result); + if (err) + return AE_ERROR; + *value = (result >> 4) & 0x1; + return AE_OK; + } + break; + case ACER_CAP_BRIGHTNESS: + switch (quirks->brightness) { + default: + err = ec_read(0x83, &result); + if (err) + return AE_ERROR; + *value = result; + return AE_OK; + } + break; + default: + return AE_BAD_ADDRESS; + } + return AE_OK; +} + +static acpi_status AMW0_set_u32(u32 value, u32 cap, struct wmi_interface *iface) +{ + struct wmab_args args; + + args.eax = ACER_AMW0_WRITE; + args.ebx = value ? (1<<8) : 0; + args.ecx = args.edx = 0; + + switch (cap) { + case ACER_CAP_MAILLED: + if (value > 1) + return AE_BAD_PARAMETER; + args.ebx |= ACER_AMW0_MAILLED_MASK; + break; + case ACER_CAP_WIRELESS: + if (value > 1) + return AE_BAD_PARAMETER; + args.ebx |= ACER_AMW0_WIRELESS_MASK; + break; + case ACER_CAP_BLUETOOTH: + if (value > 1) + return AE_BAD_PARAMETER; + args.ebx |= ACER_AMW0_BLUETOOTH_MASK; + break; + case ACER_CAP_BRIGHTNESS: + if (value > max_brightness) + return AE_BAD_PARAMETER; + switch (quirks->brightness) { + case 1: + return ec_write(0x83, value); + default: + return AE_BAD_ADDRESS; + break; + } + default: + return AE_BAD_ADDRESS; + } + + /* Actually do the set */ + return wmab_execute(&args, NULL); +} + +static acpi_status AMW0_find_mailled(void) +{ + struct wmab_args args; + struct wmab_ret ret; + acpi_status status = AE_OK; + struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + + args.eax = 0x86; + args.ebx = args.ecx = args.edx = 0; + + status = wmab_execute(&args, &out); + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *) out.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER && + obj->buffer.length == sizeof(struct wmab_ret)) { + ret = *((struct wmab_ret *) obj->buffer.pointer); + } else { + return AE_ERROR; + } + + if (ret.eex & 0x1) + interface->capability |= ACER_CAP_MAILLED; + + kfree(out.pointer); + + return AE_OK; +} + +static acpi_status AMW0_set_capabilities(void) +{ + struct wmab_args args; + struct wmab_ret ret; + acpi_status status = AE_OK; + struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + + args.eax = ACER_AMW0_WRITE; + args.ecx = args.edx = 0; + + args.ebx = 0xa2 << 8; + args.ebx |= ACER_AMW0_WIRELESS_MASK; + + status = wmab_execute(&args, &out); + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *) out.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER && + obj->buffer.length == sizeof(struct wmab_ret)) { + ret = *((struct wmab_ret *) obj->buffer.pointer); + } else { + return AE_ERROR; + } + + if (ret.eax & 0x1) + interface->capability |= ACER_CAP_WIRELESS; + + args.ebx = 2 << 8; + args.ebx |= ACER_AMW0_BLUETOOTH_MASK; + + status = wmab_execute(&args, &out); + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *) out.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER + && obj->buffer.length == sizeof(struct wmab_ret)) { + ret = *((struct wmab_ret *) obj->buffer.pointer); + } else { + return AE_ERROR; + } + + if (ret.eax & 0x1) + interface->capability |= ACER_CAP_BLUETOOTH; + + kfree(out.pointer); + + /* + * This appears to be safe to enable, since all Wistron based laptops + * appear to use the same EC register for brightness, even if they + * differ for wireless, etc + */ + interface->capability |= ACER_CAP_BRIGHTNESS; + + return AE_OK; +} + +static struct wmi_interface AMW0_interface = { + .type = ACER_AMW0, +}; + +static struct wmi_interface AMW0_V2_interface = { + .type = ACER_AMW0_V2, +}; + +/* + * New interface (The WMID interface) + */ +static acpi_status +WMI_execute_u32(u32 method_id, u32 in, u32 *out) +{ + struct acpi_buffer input = { (acpi_size) sizeof(u32), (void *)(&in) }; + struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + u32 tmp; + acpi_status status; + + status = wmi_evaluate_method(WMID_GUID1, 1, method_id, &input, &result); + + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *) result.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER && + obj->buffer.length == sizeof(u32)) { + tmp = *((u32 *) obj->buffer.pointer); + } else { + tmp = 0; + } + + if (out) + *out = tmp; + + kfree(result.pointer); + + return status; +} + +static acpi_status WMID_get_u32(u32 *value, u32 cap, +struct wmi_interface *iface) +{ + acpi_status status; + u8 tmp; + u32 result, method_id = 0; + + switch (cap) { + case ACER_CAP_WIRELESS: + method_id = ACER_WMID_GET_WIRELESS_METHODID; + break; + case ACER_CAP_BLUETOOTH: + method_id = ACER_WMID_GET_BLUETOOTH_METHODID; + break; + case ACER_CAP_BRIGHTNESS: + method_id = ACER_WMID_GET_BRIGHTNESS_METHODID; + break; + case ACER_CAP_THREEG: + method_id = ACER_WMID_GET_THREEG_METHODID; + break; + case ACER_CAP_MAILLED: + if (quirks->mailled == 1) { + ec_read(0x9f, &tmp); + *value = tmp & 0x1; + return 0; + } + default: + return AE_BAD_ADDRESS; + } + status = WMI_execute_u32(method_id, 0, &result); + + if (ACPI_SUCCESS(status)) + *value = (u8)result; + + return status; +} + +static acpi_status WMID_set_u32(u32 value, u32 cap, struct wmi_interface *iface) +{ + u32 method_id = 0; + char param; + + switch (cap) { + case ACER_CAP_BRIGHTNESS: + if (value > max_brightness) + return AE_BAD_PARAMETER; + method_id = ACER_WMID_SET_BRIGHTNESS_METHODID; + break; + case ACER_CAP_WIRELESS: + if (value > 1) + return AE_BAD_PARAMETER; + method_id = ACER_WMID_SET_WIRELESS_METHODID; + break; + case ACER_CAP_BLUETOOTH: + if (value > 1) + return AE_BAD_PARAMETER; + method_id = ACER_WMID_SET_BLUETOOTH_METHODID; + break; + case ACER_CAP_THREEG: + if (value > 1) + return AE_BAD_PARAMETER; + method_id = ACER_WMID_SET_THREEG_METHODID; + break; + case ACER_CAP_MAILLED: + if (value > 1) + return AE_BAD_PARAMETER; + if (quirks->mailled == 1) { + param = value ? 0x92 : 0x93; + i8042_command(¶m, 0x1059); + return 0; + } + break; + default: + return AE_BAD_ADDRESS; + } + return WMI_execute_u32(method_id, (u32)value, NULL); +} + +static acpi_status WMID_set_capabilities(void) +{ + struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *obj; + acpi_status status; + u32 devices; + + status = wmi_query_block(WMID_GUID2, 1, &out); + if (ACPI_FAILURE(status)) + return status; + + obj = (union acpi_object *) out.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER && + obj->buffer.length == sizeof(u32)) { + devices = *((u32 *) obj->buffer.pointer); + } else { + return AE_ERROR; + } + + /* Not sure on the meaning of the relevant bits yet to detect these */ + interface->capability |= ACER_CAP_WIRELESS; + interface->capability |= ACER_CAP_THREEG; + + /* WMID always provides brightness methods */ + interface->capability |= ACER_CAP_BRIGHTNESS; + + if (devices & 0x10) + interface->capability |= ACER_CAP_BLUETOOTH; + + if (!(devices & 0x20)) + max_brightness = 0x9; + + return status; +} + +static struct wmi_interface wmid_interface = { + .type = ACER_WMID, +}; + +/* + * Generic Device (interface-independent) + */ + +static acpi_status get_u32(u32 *value, u32 cap) +{ + acpi_status status = AE_BAD_ADDRESS; + + switch (interface->type) { + case ACER_AMW0: + status = AMW0_get_u32(value, cap, interface); + break; + case ACER_AMW0_V2: + if (cap == ACER_CAP_MAILLED) { + status = AMW0_get_u32(value, cap, interface); + break; + } + case ACER_WMID: + status = WMID_get_u32(value, cap, interface); + break; + } + + return status; +} + +static acpi_status set_u32(u32 value, u32 cap) +{ + if (interface->capability & cap) { + switch (interface->type) { + case ACER_AMW0: + return AMW0_set_u32(value, cap, interface); + case ACER_AMW0_V2: + case ACER_WMID: + return WMID_set_u32(value, cap, interface); + default: + return AE_BAD_PARAMETER; + } + } + return AE_BAD_PARAMETER; +} + +static void __init acer_commandline_init(void) +{ + /* + * These will all fail silently if the value given is invalid, or the + * capability isn't available on the given interface + */ + set_u32(mailled, ACER_CAP_MAILLED); + set_u32(wireless, ACER_CAP_WIRELESS); + set_u32(bluetooth, ACER_CAP_BLUETOOTH); + set_u32(threeg, ACER_CAP_THREEG); + set_u32(brightness, ACER_CAP_BRIGHTNESS); +} + +/* + * LED device (Mail LED only, no other LEDs known yet) + */ +static void mail_led_set(struct led_classdev *led_cdev, +enum led_brightness value) +{ + set_u32(value, ACER_CAP_MAILLED); +} + +static struct led_classdev mail_led = { + .name = "acer-mail:green", + .brightness_set = mail_led_set, +}; + +static int __init acer_led_init(struct device *dev) +{ + return led_classdev_register(dev, &mail_led); +} + +static void acer_led_exit(void) +{ + led_classdev_unregister(&mail_led); +} + +/* + * Backlight device + */ +static struct backlight_device *acer_backlight_device; + +static int read_brightness(struct backlight_device *bd) +{ + u32 value; + get_u32(&value, ACER_CAP_BRIGHTNESS); + return value; +} + +static int update_bl_status(struct backlight_device *bd) +{ + set_u32(bd->props.brightness, ACER_CAP_BRIGHTNESS); + return 0; +} + +static struct backlight_ops acer_bl_ops = { + .get_brightness = read_brightness, + .update_status = update_bl_status, +}; + +static int __init acer_backlight_init(struct device *dev) +{ + struct backlight_device *bd; + + bd = backlight_device_register("acer-wmi", dev, NULL, &acer_bl_ops); + if (IS_ERR(bd)) { + printk(ACER_ERR "Could not register Acer backlight device\n"); + acer_backlight_device = NULL; + return PTR_ERR(bd); + } + + acer_backlight_device = bd; + + bd->props.max_brightness = max_brightness; + bd->props.brightness = read_brightness(NULL); + backlight_update_status(bd); + return 0; +} + +static void __exit acer_backlight_exit(void) +{ + backlight_device_unregister(acer_backlight_device); +} + +/* + * Read/ write bool sysfs macro + */ +#define show_set_bool(value, cap) \ +static ssize_t \ +show_bool_##value(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + u32 result; \ + acpi_status status = get_u32(&result, cap); \ + if (ACPI_SUCCESS(status)) \ + return sprintf(buf, "%u\n", result); \ + return sprintf(buf, "Read error\n"); \ +} \ +\ +static ssize_t \ +set_bool_##value(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + u32 tmp = simple_strtoul(buf, NULL, 10); \ + acpi_status status = set_u32(tmp, cap); \ + if (ACPI_FAILURE(status)) \ + return -EINVAL; \ + return count; \ +} \ +static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \ + show_bool_##value, set_bool_##value); + +show_set_bool(wireless, ACER_CAP_WIRELESS); +show_set_bool(bluetooth, ACER_CAP_BLUETOOTH); +show_set_bool(threeg, ACER_CAP_THREEG); + +/* + * Read interface sysfs macro + */ +static ssize_t show_interface(struct device *dev, struct device_attribute *attr, + char *buf) +{ + switch (interface->type) { + case ACER_AMW0: + return sprintf(buf, "AMW0\n"); + case ACER_AMW0_V2: + return sprintf(buf, "AMW0 v2\n"); + case ACER_WMID: + return sprintf(buf, "WMID\n"); + default: + return sprintf(buf, "Error!\n"); + } +} + +static DEVICE_ATTR(interface, S_IWUGO | S_IRUGO | S_IWUSR, + show_interface, NULL); + +/* + * Platform device + */ +static int __devinit acer_platform_probe(struct platform_device *device) +{ + int err; + + if (has_cap(ACER_CAP_MAILLED)) { + err = acer_led_init(&device->dev); + if (err) + goto error_mailled; + } + + if (has_cap(ACER_CAP_BRIGHTNESS)) { + err = acer_backlight_init(&device->dev); + if (err) + goto error_brightness; + } + + return 0; + +error_brightness: + acer_led_exit(); +error_mailled: + return err; +} + +static int acer_platform_remove(struct platform_device *device) +{ + if (has_cap(ACER_CAP_MAILLED)) + acer_led_exit(); + if (has_cap(ACER_CAP_BRIGHTNESS)) + acer_backlight_exit(); + return 0; +} + +static int acer_platform_suspend(struct platform_device *dev, +pm_message_t state) +{ + u32 value; + struct acer_data *data = &interface->data; + + if (!data) + return -ENOMEM; + + if (has_cap(ACER_CAP_WIRELESS)) { + get_u32(&value, ACER_CAP_WIRELESS); + data->wireless = value; + } + + if (has_cap(ACER_CAP_BLUETOOTH)) { + get_u32(&value, ACER_CAP_BLUETOOTH); + data->bluetooth = value; + } + + if (has_cap(ACER_CAP_MAILLED)) { + get_u32(&value, ACER_CAP_MAILLED); + data->mailled = value; + } + + if (has_cap(ACER_CAP_BRIGHTNESS)) { + get_u32(&value, ACER_CAP_BRIGHTNESS); + data->brightness = value; + } + + return 0; +} + +static int acer_platform_resume(struct platform_device *device) +{ + struct acer_data *data = &interface->data; + + if (!data) + return -ENOMEM; + + if (has_cap(ACER_CAP_WIRELESS)) + set_u32(data->wireless, ACER_CAP_WIRELESS); + + if (has_cap(ACER_CAP_BLUETOOTH)) + set_u32(data->bluetooth, ACER_CAP_BLUETOOTH); + + if (has_cap(ACER_CAP_THREEG)) + set_u32(data->threeg, ACER_CAP_THREEG); + + if (has_cap(ACER_CAP_MAILLED)) + set_u32(data->mailled, ACER_CAP_MAILLED); + + if (has_cap(ACER_CAP_BRIGHTNESS)) + set_u32(data->brightness, ACER_CAP_BRIGHTNESS); + + return 0; +} + +static struct platform_driver acer_platform_driver = { + .driver = { + .name = "acer-wmi", + .owner = THIS_MODULE, + }, + .probe = acer_platform_probe, + .remove = acer_platform_remove, + .suspend = acer_platform_suspend, + .resume = acer_platform_resume, +}; + +static struct platform_device *acer_platform_device; + +static int remove_sysfs(struct platform_device *device) +{ + if (has_cap(ACER_CAP_WIRELESS)) + device_remove_file(&device->dev, &dev_attr_wireless); + + if (has_cap(ACER_CAP_BLUETOOTH)) + device_remove_file(&device->dev, &dev_attr_bluetooth); + + if (has_cap(ACER_CAP_THREEG)) + device_remove_file(&device->dev, &dev_attr_threeg); + + device_remove_file(&device->dev, &dev_attr_interface); + + return 0; +} + +static int create_sysfs(void) +{ + int retval = -ENOMEM; + + if (has_cap(ACER_CAP_WIRELESS)) { + retval = device_create_file(&acer_platform_device->dev, + &dev_attr_wireless); + if (retval) + goto error_sysfs; + } + + if (has_cap(ACER_CAP_BLUETOOTH)) { + retval = device_create_file(&acer_platform_device->dev, + &dev_attr_bluetooth); + if (retval) + goto error_sysfs; + } + + if (has_cap(ACER_CAP_THREEG)) { + retval = device_create_file(&acer_platform_device->dev, + &dev_attr_threeg); + if (retval) + goto error_sysfs; + } + + retval = device_create_file(&acer_platform_device->dev, + &dev_attr_interface); + if (retval) + goto error_sysfs; + + return 0; + +error_sysfs: + remove_sysfs(acer_platform_device); + return retval; +} + +static int __init acer_wmi_init(void) +{ + int err; + + printk(ACER_INFO "Acer Laptop ACPI-WMI Extras version %s\n", + ACER_WMI_VERSION); + + /* + * Detect which ACPI-WMI interface we're using. + */ + if (wmi_has_guid(AMW0_GUID1) && wmi_has_guid(WMID_GUID1)) + interface = &AMW0_V2_interface; + + if (!wmi_has_guid(AMW0_GUID1) && wmi_has_guid(WMID_GUID1)) + interface = &wmid_interface; + + if (wmi_has_guid(WMID_GUID2) && interface) { + if (ACPI_FAILURE(WMID_set_capabilities())) { + printk(ACER_ERR "Unable to detect available devices\n"); + return -ENODEV; + } + } else if (!wmi_has_guid(WMID_GUID2) && interface) { + printk(ACER_ERR "Unable to detect available devices\n"); + return -ENODEV; + } + + if (wmi_has_guid(AMW0_GUID1) && !wmi_has_guid(WMID_GUID1)) { + interface = &AMW0_interface; + + if (ACPI_FAILURE(AMW0_set_capabilities())) { + printk(ACER_ERR "Unable to detect available devices\n"); + return -ENODEV; + } + } + + if (wmi_has_guid(AMW0_GUID1)) { + if (ACPI_FAILURE(AMW0_find_mailled())) + printk(ACER_ERR "Unable to detect mail LED\n"); + } + + find_quirks(); + + if (!interface) { + printk(ACER_ERR "No or unsupported WMI interface, unable to "); + printk(KERN_CONT "load.\n"); + return -ENODEV; + } + + if (platform_driver_register(&acer_platform_driver)) { + printk(ACER_ERR "Unable to register platform driver.\n"); + goto error_platform_register; + } + acer_platform_device = platform_device_alloc("acer-wmi", -1); + platform_device_add(acer_platform_device); + + err = create_sysfs(); + if (err) + return err; + + /* Override any initial settings with values from the commandline */ + acer_commandline_init(); + + return 0; + +error_platform_register: + return -ENODEV; +} + +static void __exit acer_wmi_exit(void) +{ + remove_sysfs(acer_platform_device); + platform_device_del(acer_platform_device); + platform_driver_unregister(&acer_platform_driver); + + printk(ACER_INFO "Acer Laptop WMI Extras unloaded\n"); + return; +} + +module_init(acer_wmi_init); +module_exit(acer_wmi_exit); From dd8cd7793781c87be47bbfee65efa3fb5110f898 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Tue, 5 Feb 2008 02:17:15 +0000 Subject: [PATCH 079/112] tc1100-wmi: Add driver for HP Compaq TC1100 Tablets This is based on the 2004 out-of-tree work of Jamey Hicks, to add support via WMI for controlling the jog dial and wireless on these tablets. v1: Original release v2: As per Joshua Wise's comments, change bluetooth to jogdial (an error from the original driver). Signed-off-by: Carlos Corbacho CC: Matthew Garrett CC: Jamey Hicks CC: Joshua Wise Signed-off-by: Len Brown --- MAINTAINERS | 5 + drivers/misc/Kconfig | 9 ++ drivers/misc/Makefile | 1 + drivers/misc/tc1100-wmi.c | 290 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 305 insertions(+) create mode 100644 drivers/misc/tc1100-wmi.c diff --git a/MAINTAINERS b/MAINTAINERS index 2eaeef4b2fb9..db4bc14dadb0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1794,6 +1794,11 @@ P: Jaroslav Kysela M: perex@perex.cz S: Maintained +HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER +P: Carlos Corbacho +M: carlos@strangeworlds.co.uk +S: Odd Fixes + HPET: High Precision Event Timers driver (hpet.c) P: Clemens Ladisch M: clemens@ladisch.de diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 35d2c22c5d24..05997411bc48 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -142,6 +142,15 @@ config FUJITSU_LAPTOP If you have a Fujitsu laptop, say Y or M here. +config TC1100_WMI + tristate "HP Compaq TC1100 Tablet WMI Extras" + depends on X86 && !X86_64 + depends on ACPI + depends on ACPI_WMI + ---help--- + This is a driver for the WMI extensions (wireless and bluetooth power + control) of the HP Compaq TC1100 tablet. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 3da1491f662c..51196c09e25b 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o +obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o diff --git a/drivers/misc/tc1100-wmi.c b/drivers/misc/tc1100-wmi.c new file mode 100644 index 000000000000..f25e4c974dcf --- /dev/null +++ b/drivers/misc/tc1100-wmi.c @@ -0,0 +1,290 @@ +/* + * HP Compaq TC1100 Tablet WMI Extras Driver + * + * Copyright (C) 2007 Carlos Corbacho + * Copyright (C) 2004 Jamey Hicks + * Copyright (C) 2001, 2002 Andy Grover + * Copyright (C) 2001, 2002 Paul Diefenbaugh + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GUID "C364AC71-36DB-495A-8494-B439D472A505" + +#define TC1100_INSTANCE_WIRELESS 1 +#define TC1100_INSTANCE_JOGDIAL 2 + +#define TC1100_LOGPREFIX "tc1100-wmi: " +#define TC1100_INFO KERN_INFO TC1100_LOGPREFIX + +MODULE_AUTHOR("Jamey Hicks, Carlos Corbacho"); +MODULE_DESCRIPTION("HP Compaq TC1100 Tablet WMI Extras"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("wmi:C364AC71-36DB-495A-8494-B439D472A505"); + +static int tc1100_probe(struct platform_device *device); +static int tc1100_remove(struct platform_device *device); +static int tc1100_suspend(struct platform_device *device, pm_message_t state); +static int tc1100_resume(struct platform_device *device); + +static struct platform_driver tc1100_driver = { + .driver = { + .name = "tc1100-wmi", + .owner = THIS_MODULE, + }, + .probe = tc1100_probe, + .remove = tc1100_remove, + .suspend = tc1100_suspend, + .resume = tc1100_resume, +}; + +static struct platform_device *tc1100_device; + +struct tc1100_data { + u32 wireless; + u32 jogdial; +}; + +static struct tc1100_data suspend_data; + +/* -------------------------------------------------------------------------- + Device Management + -------------------------------------------------------------------------- */ + +static int get_state(u32 *out, u8 instance) +{ + u32 tmp; + acpi_status status; + struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + + if (!out) + return -EINVAL; + + if (instance > 2) + return -ENODEV; + + status = wmi_query_block(GUID, instance, &result); + if (ACPI_FAILURE(status)) + return -ENODEV; + + obj = (union acpi_object *) result.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER && + obj->buffer.length == sizeof(u32)) { + tmp = *((u32 *) obj->buffer.pointer); + } else { + tmp = 0; + } + + if (result.length > 0 && result.pointer) + kfree(result.pointer); + + switch (instance) { + case TC1100_INSTANCE_WIRELESS: + *out = (tmp == 3) ? 1 : 0; + return 0; + case TC1100_INSTANCE_JOGDIAL: + *out = (tmp == 1) ? 1 : 0; + return 0; + default: + return -ENODEV; + } +} + +static int set_state(u32 *in, u8 instance) +{ + u32 value; + acpi_status status; + struct acpi_buffer input; + + if (!in) + return -EINVAL; + + if (instance > 2) + return -ENODEV; + + switch (instance) { + case TC1100_INSTANCE_WIRELESS: + value = (*in) ? 1 : 2; + break; + case TC1100_INSTANCE_JOGDIAL: + value = (*in) ? 0 : 1; + break; + default: + return -ENODEV; + } + + input.length = sizeof(u32); + input.pointer = &value; + + status = wmi_set_block(GUID, instance, &input); + if (ACPI_FAILURE(status)) + return -ENODEV; + + return 0; +} + +/* -------------------------------------------------------------------------- + FS Interface (/sys) + -------------------------------------------------------------------------- */ + +/* + * Read/ write bool sysfs macro + */ +#define show_set_bool(value, instance) \ +static ssize_t \ +show_bool_##value(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + u32 result; \ + acpi_status status = get_state(&result, instance); \ + if (ACPI_SUCCESS(status)) \ + return sprintf(buf, "%d\n", result); \ + return sprintf(buf, "Read error\n"); \ +} \ +\ +static ssize_t \ +set_bool_##value(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + u32 tmp = simple_strtoul(buf, NULL, 10); \ + acpi_status status = set_state(&tmp, instance); \ + if (ACPI_FAILURE(status)) \ + return -EINVAL; \ + return count; \ +} \ +static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \ + show_bool_##value, set_bool_##value); + +show_set_bool(wireless, TC1100_INSTANCE_WIRELESS); +show_set_bool(jogdial, TC1100_INSTANCE_JOGDIAL); + +static void remove_fs(void) +{ + device_remove_file(&tc1100_device->dev, &dev_attr_wireless); + device_remove_file(&tc1100_device->dev, &dev_attr_jogdial); +} + +static int add_fs(void) +{ + int ret; + + ret = device_create_file(&tc1100_device->dev, &dev_attr_wireless); + if (ret) + goto add_sysfs_error; + + ret = device_create_file(&tc1100_device->dev, &dev_attr_jogdial); + if (ret) + goto add_sysfs_error; + + return ret; + +add_sysfs_error: + remove_fs(); + return ret; +} + +/* -------------------------------------------------------------------------- + Driver Model + -------------------------------------------------------------------------- */ + +static int tc1100_probe(struct platform_device *device) +{ + int result = 0; + + result = add_fs(); + return result; +} + + +static int tc1100_remove(struct platform_device *device) +{ + remove_fs(); + return 0; +} + +static int tc1100_suspend(struct platform_device *dev, pm_message_t state) +{ + int ret; + + ret = get_state(&suspend_data.wireless, TC1100_INSTANCE_WIRELESS); + if (ret) + return ret; + + ret = get_state(&suspend_data.jogdial, TC1100_INSTANCE_JOGDIAL); + if (ret) + return ret; + + return ret; +} + +static int tc1100_resume(struct platform_device *dev) +{ + int ret; + + ret = set_state(&suspend_data.wireless, TC1100_INSTANCE_WIRELESS); + if (ret) + return ret; + + ret = set_state(&suspend_data.jogdial, TC1100_INSTANCE_JOGDIAL); + if (ret) + return ret; + + return ret; +} + +static int __init tc1100_init(void) +{ + int result = 0; + + if (!wmi_has_guid(GUID)) + return -ENODEV; + + result = platform_driver_register(&tc1100_driver); + if (result) + return result; + + tc1100_device = platform_device_alloc("tc1100-wmi", -1); + platform_device_add(tc1100_device); + + printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras loaded\n"); + + return result; +} + +static void __exit tc1100_exit(void) +{ + platform_device_del(tc1100_device); + platform_driver_unregister(&tc1100_driver); + + printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras unloaded\n"); +} + +module_init(tc1100_init); +module_exit(tc1100_exit); From 7c2670bbb53820d0a4fab8d74593eeccd1eef225 Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Tue, 22 Jan 2008 18:46:50 +0100 Subject: [PATCH 080/112] ACPI: battery: add sysfs serial number egrep serial /proc/acpi/battery/BAT0/info serial number: 32090 serial number can tell you from the imminent danger of beeing set on fire. Signed-off-by: maximilian attems Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/battery.c | 5 +++++ drivers/power/power_supply_sysfs.c | 1 + include/linux/power_supply.h | 1 + 3 files changed, 7 insertions(+) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index c4a769d1ba85..f6215e809808 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -194,6 +194,9 @@ static int acpi_battery_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_MANUFACTURER: val->strval = battery->oem_info; break; + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + val->strval = battery->serial_number; + break; default: return -EINVAL; } @@ -212,6 +215,7 @@ static enum power_supply_property charge_battery_props[] = { POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, }; static enum power_supply_property energy_battery_props[] = { @@ -226,6 +230,7 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, }; #endif diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index d4824840c5bf..ad2bed0174d6 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -116,6 +116,7 @@ static struct device_attribute power_supply_attrs[] = { /* Properties of type `const char *' */ POWER_SUPPLY_ATTR(model_name), POWER_SUPPLY_ATTR(manufacturer), + POWER_SUPPLY_ATTR(serial_number), }; static ssize_t power_supply_show_static_attrs(struct device *dev, diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 5cbf3e371012..68ed19ccf1f7 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -94,6 +94,7 @@ enum power_supply_property { /* Properties of type `const char *' */ POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, }; enum power_supply_type { From 71fc47a9adf8ee89e5c96a47222915c5485ac437 Mon Sep 17 00:00:00 2001 From: Markus Gaugusch Date: Tue, 5 Feb 2008 00:04:06 +0100 Subject: [PATCH 081/112] ACPI: basic initramfs DSDT override support The basics of DSDT from initramfs. In case this option is selected, populate_rootfs() is called a bit earlier to have the initramfs content available during ACPI initialization. This is a very similar path to the one available at http://gaugusch.at/kernel.shtml but with some update in the documentation, default set to No and the change of populate_rootfs() the "Jeff Mahony way" (which avoids reading the initramfs twice). Signed-off-by: Thomas Renninger Signed-off-by: Eric Piel Signed-off-by: Len Brown --- Documentation/acpi/dsdt-initrd.txt | 99 ++++++++++++++++++++++++++++++ drivers/acpi/Kconfig | 17 +++++ drivers/acpi/osl.c | 73 ++++++++++++++++++++-- init/initramfs.c | 8 ++- init/main.c | 7 +++ 5 files changed, 199 insertions(+), 5 deletions(-) create mode 100644 Documentation/acpi/dsdt-initrd.txt diff --git a/Documentation/acpi/dsdt-initrd.txt b/Documentation/acpi/dsdt-initrd.txt new file mode 100644 index 000000000000..736043359dfb --- /dev/null +++ b/Documentation/acpi/dsdt-initrd.txt @@ -0,0 +1,99 @@ +ACPI Custom DSDT read from initramfs + +2003 by Markus Gaugusch < dsdt at gaugusch dot at > +Special thanks go to Thomas Renninger from SuSE, who updated the patch for +2.6.0 and later modified it to read inside initramfs +2004 - 2008 maintained by Eric Piel < eric dot piel at tremplin-utc dot net > + +This option is intended for people who would like to hack their DSDT and don't +want to recompile their kernel after every change. It can also be useful to +distros which offers pre-compiled kernels and want to allow their users to use +a modified DSDT. In the Kernel config, enable the initial RAM filesystem +support (in General Setup) and enable ACPI_CUSTOM_DSDT_INITRD at the ACPI +options (General Setup|ACPI Support|Read Custom DSDT from initramfs). + +A custom DSDT (Differentiated System Description Table) is useful when your +computer uses ACPI but problems occur due to broken implementation. Typically, +your computer works but there are some troubles with the hardware detection or +the power management. You can check that troubles come from errors in the DSDT by +activating the ACPI debug option and reading the logs. This table is provided +by the BIOS, therefore it might be a good idea to check for BIOS update on your +vendor website before going any further. Errors are often caused by vendors +testing their hardware only with Windows or because there is code which is +executed only on a specific OS with a specific version and Linux hasn't been +considered during the development. + +Before you run away from customising your DSDT, you should note that already +corrected tables are available for a fair amount of computers on this web-page: +http://acpi.sf.net/dsdt . Be careful though, to work correctly a DSDT has to +match closely the hardware, including the amount of RAM, the frequency of the +processor and the PCI cards present! If you are part of the unluckies who +cannot find their hardware in this database, you can modify your DSDT by +yourself. This process is less painful than it sounds. Download the Intel ASL +compiler/decompiler at http://www.intel.com/technology/IAPC/acpi/downloads.htm . +As root, you then have to dump your DSDT and decompile it. By using the +compiler messages as well as the kernel ACPI debug messages and the reference +book (available at the Intel website and also at http://www.acpi.info), it is +quite easy to obtain a fully working table. + +Once your new DSDT is ready you'll have to add it to an initramfs so that the +kernel can read the table at the very beginning of the boot. As the file has to +be accessed very early during the boot process the initramfs has to be an +initramfs. The file is contained into the initramfs under the name /DSDT.aml . +To obtain such an initramfs, you might have to modify your initramfs script or +you can add it later to the initramfs with the script appended to this +document. The command will look like: +initramfs-add-dsdt initramfs.img my-dsdt.aml + +In case you don't use any initramfs, the possibilities you have are to either +start using one (try mkinitrd or yaird), or use the "Include Custom DSDT" +configure option to directly include your DSDT inside the kernel. + +The message "Looking for DSDT in initramfs..." will tell you if the DSDT was +found or not. If you need to update your DSDT, generate a new initramfs and +perform the steps above. Don't forget that with Lilo, you'll have to re-run it. + + +====================== Here starts initramfs-add-dsdt ========================== +#!/bin/bash +# Adds a DSDT file to the initrd (if it's an initramfs) +# first argument is the name of archive +# second argument is the name of the file to add +# The file will be copied as /DSDT.aml + +# 20060126: fix "Premature end of file" with some old cpio (Roland Robic) +# 20060205: this time it should really work + +# check the arguments +if [ $# -ne 2 ]; then + program_name=$(basename $0) + echo "\ +$program_name: too few arguments +Usage: $program_name initrd-name.img DSDT-to-add.aml +Adds a DSDT file to an initrd (in initramfs format) + + initrd-name.img: filename of the initrd in initramfs format + DSDT-to-add.aml: filename of the DSDT file to add + " 1>&2 + exit 1 +fi + +# we should check it's an initramfs + +tempcpio=$(mktemp -d) +# cleanup on exit, hangup, interrupt, quit, termination +trap 'rm -rf $tempcpio' 0 1 2 3 15 + +# extract the archive +gunzip -c "$1" > "$tempcpio"/initramfs.cpio || exit 1 + +# copy the DSDT file at the root of the directory so that we can call it "/DSDT.aml" +cp -f "$2" "$tempcpio"/DSDT.aml + +# add the file +cd "$tempcpio" +(echo DSDT.aml | cpio --quiet -H newc -o -A -O "$tempcpio"/initramfs.cpio) || exit 1 +cd "$OLDPWD" + +# re-compress the archive +gzip -c "$tempcpio"/initramfs.cpio > "$1" diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ccf6ea95f68c..0442ae153a24 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -274,6 +274,23 @@ config ACPI_CUSTOM_DSDT_FILE Enter the full path name to the file which includes the AmlCode declaration. +config ACPI_CUSTOM_DSDT_INITRD + bool "Read Custom DSDT from initramfs" + depends on BLK_DEV_INITRD + default n + help + The DSDT (Differentiated System Description Table) often needs to be + overridden because of broken BIOS implementations. If this feature is + activated you will be able to provide a customized DSDT by adding it + to your initramfs. If your mkinitrd tool does not support this feature + a script is provided in the documentation. For more details see + or . + If there is no table found, it will fall-back to the custom DSDT + in-kernel (if activated) or to the DSDT from the BIOS. + + Even if you do not need a new one at the moment, you may want to use a + better DSDT later. It is safe to say Y here. + config ACPI_BLACKLIST_YEAR int "Disable ACPI for systems before Jan 1st this year" if X86_32 default 0 diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e53fb516f9d4..131936e7ff17 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -312,6 +312,66 @@ acpi_os_predefined_override(const struct acpi_predefined_names *init_val, return AE_OK; } +#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD +struct acpi_table_header *acpi_find_dsdt_initrd(void) +{ + struct file *firmware_file; + mm_segment_t oldfs; + unsigned long len, len2; + struct acpi_table_header *dsdt_buffer, *ret = NULL; + struct kstat stat; + char *ramfs_dsdt_name = "/DSDT.aml"; + + printk(KERN_INFO PREFIX "Looking for DSDT in initramfs... "); + + /* + * Never do this at home, only the user-space is allowed to open a file. + * The clean way would be to use the firmware loader. But this code must be run + * before there is any userspace available. So we need a static/init firmware + * infrastructure, which doesn't exist yet... + */ + if (vfs_stat(ramfs_dsdt_name, &stat) < 0) { + printk("not found.\n"); + return ret; + } + + len = stat.size; + /* check especially against empty files */ + if (len <= 4) { + printk("error, file is too small: only %lu bytes.\n", len); + return ret; + } + + firmware_file = filp_open(ramfs_dsdt_name, O_RDONLY, 0); + if (IS_ERR(firmware_file)) { + printk("error, could not open file %s.\n", ramfs_dsdt_name); + return ret; + } + + dsdt_buffer = ACPI_ALLOCATE(len); + if (!dsdt_buffer) { + printk("error when allocating %lu bytes of memory.\n", len); + goto err; + } + + oldfs = get_fs(); + set_fs(KERNEL_DS); + len2 = vfs_read(firmware_file, (char __user *)dsdt_buffer, len, &firmware_file->f_pos); + set_fs(oldfs); + if (len2 < len) { + printk("error trying to read %lu bytes from %s.\n", len, ramfs_dsdt_name); + ACPI_FREE(dsdt_buffer); + goto err; + } + + printk("successfully read %lu bytes from %s.\n", len, ramfs_dsdt_name); + ret = dsdt_buffer; +err: + filp_close(firmware_file, NULL); + return ret; +} +#endif + acpi_status acpi_os_table_override(struct acpi_table_header * existing_table, struct acpi_table_header ** new_table) @@ -319,13 +379,18 @@ acpi_os_table_override(struct acpi_table_header * existing_table, if (!existing_table || !new_table) return AE_BAD_PARAMETER; + *new_table = NULL; + #ifdef CONFIG_ACPI_CUSTOM_DSDT if (strncmp(existing_table->signature, "DSDT", 4) == 0) *new_table = (struct acpi_table_header *)AmlCode; - else - *new_table = NULL; -#else - *new_table = NULL; +#endif +#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD + if (strncmp(existing_table->signature, "DSDT", 4) == 0) { + struct acpi_table_header *initrd_table = acpi_find_dsdt_initrd(); + if (initrd_table) + *new_table = initrd_table; + } #endif return AE_OK; } diff --git a/init/initramfs.c b/init/initramfs.c index d53fee8d8604..c0b1e0533d80 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -538,7 +538,7 @@ skip: initrd_end = 0; } -static int __init populate_rootfs(void) +int __init populate_rootfs(void) { char *err = unpack_to_rootfs(__initramfs_start, __initramfs_end - __initramfs_start, 0); @@ -577,4 +577,10 @@ static int __init populate_rootfs(void) } return 0; } +#ifndef CONFIG_ACPI_CUSTOM_DSDT_INITRD +/* + * if this option is enabled, populate_rootfs() is called _earlier_ in the + * boot sequence. This insures that the ACPI initialisation can find the file. + */ rootfs_initcall(populate_rootfs); +#endif diff --git a/init/main.c b/init/main.c index c691f5f7fc27..2a78932f6c07 100644 --- a/init/main.c +++ b/init/main.c @@ -102,6 +102,12 @@ static inline void mark_rodata_ro(void) { } extern void tc_init(void); #endif +#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD +extern int populate_rootfs(void); +#else +static inline void populate_rootfs(void) {} +#endif + enum system_states system_state; EXPORT_SYMBOL(system_state); @@ -648,6 +654,7 @@ asmlinkage void __init start_kernel(void) check_bugs(); + populate_rootfs(); /* For DSDT override from initramfs */ acpi_early_init(); /* before LAPIC and SMP init */ /* Do the rest non-__init'ed, we're now alive */ From 6ed31e92e94830c138fbd470486383380710069a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Tue, 5 Feb 2008 00:04:50 +0100 Subject: [PATCH 082/112] ACPI: Taint kernel on ACPI table override (format corrected) When an ACPI table is overridden (for now this can happen only for DSDT) display a big warning and taint the kernel with flag A. Signed-off-by: Eric Piel Signed-off-by: Len Brown --- drivers/acpi/osl.c | 7 +++++++ include/linux/kernel.h | 1 + kernel/panic.c | 5 +++-- 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 131936e7ff17..bbd8360bfb23 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -392,6 +392,13 @@ acpi_os_table_override(struct acpi_table_header * existing_table, *new_table = initrd_table; } #endif + if (*new_table != NULL) { + printk(KERN_WARNING PREFIX "Override [%4.4s-%8.8s], " + "this is unsafe: tainting kernel\n", + existing_table->signature, + existing_table->oem_table_id); + add_taint(TAINT_OVERRIDDEN_ACPI_TABLE); + } return AE_OK; } diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 18222f267bc4..9e01f376840a 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -243,6 +243,7 @@ extern enum system_states { #define TAINT_BAD_PAGE (1<<5) #define TAINT_USER (1<<6) #define TAINT_DIE (1<<7) +#define TAINT_OVERRIDDEN_ACPI_TABLE (1<<8) extern void dump_stack(void) __cold; diff --git a/kernel/panic.c b/kernel/panic.c index d9e90cfe3298..24af9f8bac99 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -161,7 +161,7 @@ const char *print_tainted(void) { static char buf[20]; if (tainted) { - snprintf(buf, sizeof(buf), "Tainted: %c%c%c%c%c%c%c%c", + snprintf(buf, sizeof(buf), "Tainted: %c%c%c%c%c%c%c%c%c", tainted & TAINT_PROPRIETARY_MODULE ? 'P' : 'G', tainted & TAINT_FORCED_MODULE ? 'F' : ' ', tainted & TAINT_UNSAFE_SMP ? 'S' : ' ', @@ -169,7 +169,8 @@ const char *print_tainted(void) tainted & TAINT_MACHINE_CHECK ? 'M' : ' ', tainted & TAINT_BAD_PAGE ? 'B' : ' ', tainted & TAINT_USER ? 'U' : ' ', - tainted & TAINT_DIE ? 'D' : ' '); + tainted & TAINT_DIE ? 'D' : ' ', + tainted & TAINT_OVERRIDDEN_ACPI_TABLE ? 'A' : ' '); } else snprintf(buf, sizeof(buf), "Not tainted"); From 5229e87d59cef33539322948bd8e3b5a537f7c97 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Feb 2008 01:26:55 -0500 Subject: [PATCH 083/112] ACPI: create /sys/firmware/acpi/interrupts See Documentation/ABI/testing/sysfs-firmware-acpi Based-on-original-patch-by: Luming Yu Acked-by: Greg Kroah-Hartman Signed-off-by: Len Brown --- Documentation/ABI/testing/sysfs-firmware-acpi | 99 +++++++++ drivers/acpi/events/evevent.c | 2 +- drivers/acpi/events/evgpe.c | 2 +- drivers/acpi/osl.c | 12 +- drivers/acpi/system.c | 208 ++++++++++++++++++ drivers/acpi/utilities/utglobal.c | 2 - include/acpi/acglobal.h | 4 - include/acpi/acpiosxf.h | 3 + include/linux/acpi.h | 2 + 9 files changed, 325 insertions(+), 9 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-firmware-acpi diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi new file mode 100644 index 000000000000..9470ed9afcc0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -0,0 +1,99 @@ +What: /sys/firmware/acpi/interrupts/ +Date: February 2008 +Contact: Len Brown +Description: + All ACPI interrupts are handled via a single IRQ, + the System Control Interrupt (SCI), which appears + as "acpi" in /proc/interrupts. + + However, one of the main functions of ACPI is to make + the platform understand random hardware without + special driver support. So while the SCI handles a few + well known (fixed feature) interrupts sources, such + as the power button, it can also handle a variable + number of a "General Purpose Events" (GPE). + + A GPE vectors to a specified handler in AML, which + can do a anything the BIOS writer wants from + OS context. GPE 0x12, for example, would vector + to a level or edge handler called _L12 or _E12. + The handler may do its business and return. + Or the handler may send send a Notify event + to a Linux device driver registered on an ACPI device, + such as a battery, or a processor. + + To figure out where all the SCI's are coming from, + /sys/firmware/acpi/interrupts contains a file listing + every possible source, and the count of how many + times it has triggered. + + $ cd /sys/firmware/acpi/interrupts + $ grep . * + error:0 + ff_gbl_lock:0 + ff_pmtimer:0 + ff_pwr_btn:0 + ff_rt_clk:0 + ff_slp_btn:0 + gpe00:0 + gpe01:0 + gpe02:0 + gpe03:0 + gpe04:0 + gpe05:0 + gpe06:0 + gpe07:0 + gpe08:0 + gpe09:174 + gpe0A:0 + gpe0B:0 + gpe0C:0 + gpe0D:0 + gpe0E:0 + gpe0F:0 + gpe10:0 + gpe11:60 + gpe12:0 + gpe13:0 + gpe14:0 + gpe15:0 + gpe16:0 + gpe17:0 + gpe18:0 + gpe19:7 + gpe1A:0 + gpe1B:0 + gpe1C:0 + gpe1D:0 + gpe1E:0 + gpe1F:0 + gpe_all:241 + sci:241 + + sci - The total number of times the ACPI SCI + has claimed an interrupt. + + gpe_all - count of SCI caused by GPEs. + + gpeXX - count for individual GPE source + + ff_gbl_lock - Global Lock + + ff_pmtimer - PM Timer + + ff_pwr_btn - Power Button + + ff_rt_clk - Real Time Clock + + ff_slp_btn - Sleep Button + + error - an interrupt that can't be accounted for above. + + Root has permission to clear any of these counters. Eg. + # echo 0 > gpe11 + + All counters can be cleared by clearing the total "sci": + # echo 0 > sci + + None of these counters has an effect on the function + of the system, they are simply statistics. diff --git a/drivers/acpi/events/evevent.c b/drivers/acpi/events/evevent.c index e41287815ea1..3048801a37b5 100644 --- a/drivers/acpi/events/evevent.c +++ b/drivers/acpi/events/evevent.c @@ -259,7 +259,7 @@ u32 acpi_ev_fixed_event_detect(void) enable_bit_mask)) { /* Found an active (signalled) event */ - + acpi_os_fixed_event_count(i); int_status |= acpi_ev_fixed_event_dispatch((u32) i); } } diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index e22f4a973c0f..4bd9e2291bd9 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -618,7 +618,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) ACPI_FUNCTION_TRACE(ev_gpe_dispatch); - acpi_gpe_count++; + acpi_os_gpe_count(gpe_number); /* * If edge-triggered, clear the GPE status bit now. Note that diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e53fb516f9d4..1087efeca9b1 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -332,7 +332,15 @@ acpi_os_table_override(struct acpi_table_header * existing_table, static irqreturn_t acpi_irq(int irq, void *dev_id) { - return (*acpi_irq_handler) (acpi_irq_context) ? IRQ_HANDLED : IRQ_NONE; + u32 handled; + + handled = (*acpi_irq_handler) (acpi_irq_context); + + if (handled) { + acpi_irq_handled++; + return IRQ_HANDLED; + } else + return IRQ_NONE; } acpi_status @@ -341,6 +349,8 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, { unsigned int irq; + acpi_irq_stats_init(); + /* * Ignore the GSI from the core, and use the value in our copy of the * FADT. It may not be the same if an interrupt source override exists diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 5ffe0ea18967..ce881713f7a6 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -40,6 +40,8 @@ ACPI_MODULE_NAME("system"); #define ACPI_SYSTEM_CLASS "system" #define ACPI_SYSTEM_DEVICE_NAME "System" +u32 acpi_irq_handled; + /* * Make ACPICA version work as module param */ @@ -166,6 +168,212 @@ static int acpi_system_sysfs_init(void) return 0; } +/* + * Detailed ACPI IRQ counters in /sys/firmware/acpi/interrupts/ + * See Documentation/ABI/testing/sysfs-firmware-acpi + */ + +#define COUNT_GPE 0 +#define COUNT_SCI 1 /* acpi_irq_handled */ +#define COUNT_ERROR 2 /* other */ +#define NUM_COUNTERS_EXTRA 3 + +static u32 *all_counters; +static u32 num_gpes; +static u32 num_counters; +static struct attribute **all_attrs; +static u32 acpi_gpe_count; + +static struct attribute_group interrupt_stats_attr_group = { + .name = "interrupts", +}; +static struct kobj_attribute *counter_attrs; + +static int count_num_gpes(void) +{ + int count = 0; + struct acpi_gpe_xrupt_info *gpe_xrupt_info; + struct acpi_gpe_block_info *gpe_block; + acpi_cpu_flags flags; + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_info) { + gpe_block = gpe_xrupt_info->gpe_block_list_head; + while (gpe_block) { + count += gpe_block->register_count * + ACPI_GPE_REGISTER_WIDTH; + gpe_block = gpe_block->next; + } + gpe_xrupt_info = gpe_xrupt_info->next; + } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + + return count; +} + +static void delete_gpe_attr_array(void) +{ + u32 *tmp = all_counters; + + all_counters = NULL; + kfree(tmp); + + if (counter_attrs) { + int i; + + for (i = 0; i < num_gpes; i++) + kfree(counter_attrs[i].attr.name); + + kfree(counter_attrs); + } + kfree(all_attrs); + + return; +} + +void acpi_os_gpe_count(u32 gpe_number) +{ + acpi_gpe_count++; + + if (!all_counters) + return; + + if (gpe_number < num_gpes) + all_counters[gpe_number]++; + else + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR]++; + + return; +} + +void acpi_os_fixed_event_count(u32 event_number) +{ + if (!all_counters) + return; + + if (event_number < ACPI_NUM_FIXED_EVENTS) + all_counters[num_gpes + event_number]++; + else + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR]++; + + return; +} + +static ssize_t counter_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI] = + acpi_irq_handled; + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE] = + acpi_gpe_count; + + return sprintf(buf, "%d\n", all_counters[attr - counter_attrs]); +} + +/* + * counter_set() sets the specified counter. + * setting the total "sci" file to any value clears all counters. + */ +static ssize_t counter_set(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t size) +{ + int index = attr - counter_attrs; + + if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) { + int i; + for (i = 0; i < num_counters; ++i) + all_counters[i] = 0; + acpi_gpe_count = 0; + acpi_irq_handled = 0; + + } else + all_counters[index] = strtoul(buf, NULL, 0); + + return size; +} + +void acpi_irq_stats_init(void) +{ + int i; + + if (all_counters) + return; + + num_gpes = count_num_gpes(); + num_counters = num_gpes + ACPI_NUM_FIXED_EVENTS + NUM_COUNTERS_EXTRA; + + all_attrs = kzalloc(sizeof(struct attribute *) * (num_counters + 1), + GFP_KERNEL); + if (all_attrs == NULL) + return; + + all_counters = kzalloc(sizeof(u32) * (num_counters), GFP_KERNEL); + if (all_counters == NULL) + goto fail; + + counter_attrs = kzalloc(sizeof(struct kobj_attribute) * (num_counters), + GFP_KERNEL); + if (counter_attrs == NULL) + goto fail; + + for (i = 0; i < num_counters; ++i) { + char buffer[10]; + char *name; + + if (i < num_gpes) + sprintf(buffer, "gpe%02X", i); + else if (i == num_gpes + ACPI_EVENT_PMTIMER) + sprintf(buffer, "ff_pmtimer"); + else if (i == num_gpes + ACPI_EVENT_GLOBAL) + sprintf(buffer, "ff_gbl_lock"); + else if (i == num_gpes + ACPI_EVENT_POWER_BUTTON) + sprintf(buffer, "ff_pwr_btn"); + else if (i == num_gpes + ACPI_EVENT_SLEEP_BUTTON) + sprintf(buffer, "ff_slp_btn"); + else if (i == num_gpes + ACPI_EVENT_RTC) + sprintf(buffer, "ff_rt_clk"); + else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE) + sprintf(buffer, "gpe_all"); + else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) + sprintf(buffer, "sci"); + else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR) + sprintf(buffer, "error"); + else + sprintf(buffer, "bug%02X", i); + + name = kzalloc(strlen(buffer) + 1, GFP_KERNEL); + if (name == NULL) + goto fail; + strncpy(name, buffer, strlen(buffer) + 1); + + counter_attrs[i].attr.name = name; + counter_attrs[i].attr.mode = 0644; + counter_attrs[i].show = counter_show; + counter_attrs[i].store = counter_set; + + all_attrs[i] = &counter_attrs[i].attr; + } + + interrupt_stats_attr_group.attrs = all_attrs; + sysfs_create_group(acpi_kobj, &interrupt_stats_attr_group); + return; + +fail: + delete_gpe_attr_array(); + return; +} + +static void __exit interrupt_stats_exit(void) +{ + sysfs_remove_group(acpi_kobj, &interrupt_stats_attr_group); + + delete_gpe_attr_array(); + + return; +} + /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c index 93ea8290b4f7..630c9a2c5b7b 100644 --- a/drivers/acpi/utilities/utglobal.c +++ b/drivers/acpi/utilities/utglobal.c @@ -671,7 +671,6 @@ void acpi_ut_init_globals(void) /* GPE support */ - acpi_gpe_count = 0; acpi_gbl_gpe_xrupt_list_head = NULL; acpi_gbl_gpe_fadt_blocks[0] = NULL; acpi_gbl_gpe_fadt_blocks[1] = NULL; @@ -735,4 +734,3 @@ void acpi_ut_init_globals(void) ACPI_EXPORT_SYMBOL(acpi_dbg_level) ACPI_EXPORT_SYMBOL(acpi_dbg_layer) - ACPI_EXPORT_SYMBOL(acpi_gpe_count) diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 347a911d8237..47a1fd8f2d8a 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -117,10 +117,6 @@ extern u32 acpi_dbg_layer; extern u32 acpi_gbl_nesting_level; -/* Event counters */ - -ACPI_EXTERN u32 acpi_gpe_count; - /* Support for dynamic control method tracing mechanism */ ACPI_EXTERN u32 acpi_gbl_original_dbg_level; diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index ca882b8e7d10..1a16cfbe9e0d 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -181,6 +181,9 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_status acpi_os_remove_interrupt_handler(u32 gsi, acpi_osd_handler service_routine); +void acpi_os_gpe_count(u32 gpe_number); +void acpi_os_fixed_event_count(u32 fixed_event_number); + /* * Threads and Scheduling */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 63f2e6ed698f..cb911f3e40f5 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -115,7 +115,9 @@ int acpi_unmap_lsapic(int cpu); int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); +void acpi_irq_stats_init(void); +extern u32 acpi_irq_handled; extern int acpi_mp_config; extern struct acpi_mcfg_allocation *pci_mmcfg_config; From f8d1c94b346b62747322728e00e11f552cd90902 Mon Sep 17 00:00:00 2001 From: Corentin CHARY Date: Wed, 16 Jan 2008 16:56:42 +0100 Subject: [PATCH 084/112] asus-laptop new write_acpi_int Just a little modification of write_acpi_int Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/misc/asus-laptop.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index 0846c33296bc..34666ff60d37 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -254,7 +254,7 @@ ASUS_LED(gled, "gaming"); * method is searched within the scope of the handle, can be NULL. The output * of the method is written is output, which can also be NULL * - * returns 1 if write is successful, 0 else. + * returns 0 if write is successful, -1 else. */ static int write_acpi_int(acpi_handle handle, const char *method, int val, struct acpi_buffer *output) @@ -263,13 +263,19 @@ static int write_acpi_int(acpi_handle handle, const char *method, int val, union acpi_object in_obj; //the only param we use acpi_status status; + if (!handle) + return 0; + params.count = 1; params.pointer = &in_obj; in_obj.type = ACPI_TYPE_INTEGER; in_obj.integer.value = val; status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); - return (status == AE_OK); + if (status == AE_OK) + return 0; + else + return -1; } static int read_wireless_status(int mask) @@ -335,7 +341,7 @@ static void write_status(acpi_handle handle, int out, int mask) break; } - if (handle && !write_acpi_int(handle, NULL, out, NULL)) + if (write_acpi_int(handle, NULL, out, NULL)) printk(ASUS_WARNING " write failed %x\n", mask); } @@ -415,7 +421,7 @@ static int set_brightness(struct backlight_device *bd, int value) value = (0 < value) ? ((15 < value) ? 15 : value) : 0; /* 0 <= value <= 15 */ - if (!write_acpi_int(brightness_set_handle, NULL, value, NULL)) { + if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) { printk(ASUS_WARNING "Error changing brightness\n"); ret = -EIO; } @@ -545,7 +551,7 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr, rv = parse_arg(buf, count, &value); if (rv > 0) { - if (!write_acpi_int(ledd_set_handle, NULL, value, NULL)) + if (write_acpi_int(ledd_set_handle, NULL, value, NULL)) printk(ASUS_WARNING "LED display write failed\n"); else hotk->ledd_status = (u32) value; @@ -590,7 +596,7 @@ static ssize_t store_bluetooth(struct device *dev, static void set_display(int value) { /* no sanity check needed for now */ - if (!write_acpi_int(display_set_handle, NULL, value, NULL)) + if (write_acpi_int(display_set_handle, NULL, value, NULL)) printk(ASUS_WARNING "Error setting display\n"); return; } @@ -647,7 +653,7 @@ static ssize_t store_disp(struct device *dev, struct device_attribute *attr, */ static void set_light_sens_switch(int value) { - if (!write_acpi_int(ls_switch_handle, NULL, value, NULL)) + if (write_acpi_int(ls_switch_handle, NULL, value, NULL)) printk(ASUS_WARNING "Error setting light sensor switch\n"); hotk->light_switch = value; } @@ -672,7 +678,7 @@ static ssize_t store_lssw(struct device *dev, struct device_attribute *attr, static void set_light_sens_level(int value) { - if (!write_acpi_int(ls_level_handle, NULL, value, NULL)) + if (write_acpi_int(ls_level_handle, NULL, value, NULL)) printk(ASUS_WARNING "Error setting light sensor level\n"); hotk->light_level = value; } @@ -860,7 +866,7 @@ static int asus_hotk_get_info(void) printk(ASUS_WARNING "Couldn't get the DSDT table header\n"); /* We have to write 0 on init this far for all ASUS models */ - if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { + if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { printk(ASUS_ERR "Hotkey initialization failed\n"); return -ENODEV; } From e1af14e4b3d5f2a348987e3069ec835b782782b0 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Sat, 2 Feb 2008 21:07:38 +0100 Subject: [PATCH 085/112] asus-laptop: add parentheses '!' has a higher priority than '&': bitanding has no effect. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Len Brown --- drivers/misc/asus-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index 34666ff60d37..3bd883166e3d 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -327,7 +327,7 @@ static void write_status(acpi_handle handle, int out, int mask) switch (mask) { case MLED_ON: - out = !out & 0x1; + out = !(out & 0x1); break; case GLED_ON: out = (out & 0x1) + 1; From 31e0729a85c1e8ffaf4d14b4c201c28b5d1c9585 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Mon, 4 Feb 2008 23:31:18 -0800 Subject: [PATCH 086/112] asus_acpi: add support for F3Sa Add support for ASUS F3Sa notebook. Features: - LCD on/off - Brightness - Wifi kill - Bluetooth kill Signed-off-by: Luca Tettamanti Cc: Corentin Chary Cc: Karol Kozimor Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/asus_acpi.c | 55 ++++++++++++++++++++++++++++++++-------- 1 file changed, 45 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index d915fec9bf63..d25ef961415c 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -142,6 +142,7 @@ struct asus_hotk { xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N A4S, //Z81sp //(Centrino) + F3Sa, END_MODEL } model; //Models currently supported u16 event_count[128]; //count for each event TODO make this better @@ -405,7 +406,20 @@ static struct model_data model_conf[END_MODEL] = { .brightness_get = "GPLV", .mt_bt_switch = "BLED", .mt_wled = "WLED" - } + }, + + { + .name = "F3Sa", + .mt_bt_switch = "BLED", + .mt_wled = "WLED", + .mt_mled = "MLED", + .brightness_get = "GPLV", + .brightness_set = "SPLV", + .mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10", + .lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN", + .display_get = "\\ADVG", + .display_set = "SDSP", + }, }; @@ -710,15 +724,8 @@ static int get_lcd_state(void) { int lcd = 0; - if (hotk->model != L3H) { - /* We don't have to check anything if we are here */ - if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) - printk(KERN_WARNING - "Asus ACPI: Error reading LCD status\n"); - - if (hotk->model == L2D) - lcd = ~lcd; - } else { /* L3H and the like have to be handled differently */ + if (hotk->model == L3H) { + /* L3H and the like have to be handled differently */ acpi_status status = 0; struct acpi_object_list input; union acpi_object mt_params[2]; @@ -745,6 +752,32 @@ static int get_lcd_state(void) if (out_obj.type == ACPI_TYPE_INTEGER) /* That's what the AML code does */ lcd = out_obj.integer.value >> 8; + } else if (hotk->model == F3Sa) { + unsigned long tmp; + union acpi_object param; + struct acpi_object_list input; + acpi_status status; + + /* Read pin 11 */ + param.type = ACPI_TYPE_INTEGER; + param.integer.value = 0x11; + input.count = 1; + input.pointer = ¶m; + + status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status, + &input, &tmp); + if (status != AE_OK) + return -1; + + lcd = tmp; + } else { + /* We don't have to check anything if we are here */ + if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) + printk(KERN_WARNING + "Asus ACPI: Error reading LCD status\n"); + + if (hotk->model == L2D) + lcd = ~lcd; } return (lcd & 1); @@ -1134,6 +1167,8 @@ static int asus_model_match(char *model) return W5A; else if (strncmp(model, "A4S", 3) == 0) return A4S; + else if (strncmp(model, "F3Sa", 4) == 0) + return F3Sa; else return END_MODEL; } From e76d5f7e831a3f33dd6fa8eb94533b0b4cb22b6f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Miguel=20Bot=C3=B3n?= Date: Mon, 4 Feb 2008 23:31:19 -0800 Subject: [PATCH 087/112] ACPI: remove duplicated warning message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove duplicated warning message in acpi_power_transition() ACPI: Transitioning device [%s] to D%d\n This warning message is printed by acpi_bus_set_power() so we don't need to print it again. Signed-off-by: Miguel Botón Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/power.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index af1769a20c7a..76bf6d90c700 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -458,11 +458,9 @@ int acpi_power_transition(struct acpi_device *device, int state) } end: - if (result) { + if (result) device->power.state = ACPI_STATE_UNKNOWN; - printk(KERN_WARNING PREFIX "Transitioning device [%s] to D%d\n", - device->pnp.bus_id, state); - } else { + else { /* We shouldn't change the state till all above operations succeed */ device->power.state = state; } From 1a3b77ae60f19fa85f4cdc34b6c09efb1a18372c Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Mon, 4 Feb 2008 23:31:20 -0800 Subject: [PATCH 088/112] ACPI: acpi_pci_irq_find_prt_entry(): use list_for_each_entry() instead of list_for_each() Signed-off-by: Matthias Kaehlcke Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/pci_irq.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 62010c2481b3..76d9c669d2d8 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -51,10 +51,8 @@ static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment, int bus, int device, int pin) { - struct list_head *node = NULL; struct acpi_prt_entry *entry = NULL; - if (!acpi_prt.count) return NULL; @@ -64,8 +62,7 @@ static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment, * */ spin_lock(&acpi_prt_lock); - list_for_each(node, &acpi_prt.entries) { - entry = list_entry(node, struct acpi_prt_entry, node); + list_for_each_entry(entry, &acpi_prt.entries, node) { if ((segment == entry->id.segment) && (bus == entry->id.bus) && (device == entry->id.device) From df92e695998e1bc6e426a840eb86d6d1ee87e2a5 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Mon, 4 Feb 2008 23:31:22 -0800 Subject: [PATCH 089/112] ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" Cc: Jean Delvare Cc: Len Brown Cc: Bjorn Helgaas Signed-off-by: Thomas Renninger Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/dispatcher/dsopcode.c | 4 +- drivers/acpi/osl.c | 175 ++++++++++++++++++++++++++++- include/acpi/acpiosxf.h | 4 +- include/linux/acpi.h | 17 +++ 4 files changed, 195 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c index fc9da4879cbf..f501e083aac7 100644 --- a/drivers/acpi/dispatcher/dsopcode.c +++ b/drivers/acpi/dispatcher/dsopcode.c @@ -359,7 +359,9 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc) status = acpi_os_validate_address(obj_desc->region.space_id, obj_desc->region.address, - (acpi_size) obj_desc->region.length); + (acpi_size) obj_desc->region.length, + acpi_ut_get_node_name(node)); + if (ACPI_FAILURE(status)) { /* * Invalid address/length. We will emit an error message and mark diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e53fb516f9d4..222f7b1b66f7 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -44,6 +44,8 @@ #include #include +#include +#include #define _COMPONENT ACPI_OS_SERVICES ACPI_MODULE_NAME("osl"); @@ -74,6 +76,18 @@ static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; static struct workqueue_struct *kacpi_notify_wq; +struct acpi_res_list { + resource_size_t start; + resource_size_t end; + acpi_adr_space_type resource_type; /* IO port, System memory, ...*/ + char name[5]; /* only can have a length of 4 chars, make use of this + one instead of res->name, no need to kalloc then */ + struct list_head resource_list; +}; + +static LIST_HEAD(resource_list_head); +static DEFINE_SPINLOCK(acpi_res_lock); + #define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ static char osi_additional_string[OSI_STRING_LENGTH_MAX]; @@ -1102,6 +1116,127 @@ static int __init acpi_wake_gpes_always_on_setup(char *str) __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup); +/* Check of resource interference between native drivers and ACPI + * OperationRegions (SystemIO and System Memory only). + * IO ports and memory declared in ACPI might be used by the ACPI subsystem + * in arbitrary AML code and can interfere with legacy drivers. + * acpi_enforce_resources= can be set to: + * + * - strict (2) + * -> further driver trying to access the resources will not load + * - lax (default) (1) + * -> further driver trying to access the resources will load, but you + * get a system message that something might go wrong... + * + * - no (0) + * -> ACPI Operation Region resources will not be registered + * + */ +#define ENFORCE_RESOURCES_STRICT 2 +#define ENFORCE_RESOURCES_LAX 1 +#define ENFORCE_RESOURCES_NO 0 + +static unsigned int acpi_enforce_resources = ENFORCE_RESOURCES_LAX; + +static int __init acpi_enforce_resources_setup(char *str) +{ + if (str == NULL || *str == '\0') + return 0; + + if (!strcmp("strict", str)) + acpi_enforce_resources = ENFORCE_RESOURCES_STRICT; + else if (!strcmp("lax", str)) + acpi_enforce_resources = ENFORCE_RESOURCES_LAX; + else if (!strcmp("no", str)) + acpi_enforce_resources = ENFORCE_RESOURCES_NO; + + return 1; +} + +__setup("acpi_enforce_resources=", acpi_enforce_resources_setup); + +/* Check for resource conflicts between ACPI OperationRegions and native + * drivers */ +static int acpi_check_resource_conflict(struct resource *res) +{ + struct acpi_res_list *res_list_elem; + int ioport; + int clash = 0; + + if (acpi_enforce_resources == ENFORCE_RESOURCES_NO) + return 0; + if (!(res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_MEM)) + return 0; + + ioport = res->flags & IORESOURCE_IO; + + spin_lock(&acpi_res_lock); + list_for_each_entry(res_list_elem, &resource_list_head, + resource_list) { + if (ioport && (res_list_elem->resource_type + != ACPI_ADR_SPACE_SYSTEM_IO)) + continue; + if (!ioport && (res_list_elem->resource_type + != ACPI_ADR_SPACE_SYSTEM_MEMORY)) + continue; + + if (res->end < res_list_elem->start + || res_list_elem->end < res->start) + continue; + clash = 1; + break; + } + spin_unlock(&acpi_res_lock); + + if (clash) { + if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) { + printk(KERN_INFO "%sACPI: %s resource %s [0x%llx-0x%llx]" + " conflicts with ACPI region %s" + " [0x%llx-0x%llx]\n", + acpi_enforce_resources == ENFORCE_RESOURCES_LAX + ? KERN_WARNING : KERN_ERR, + ioport ? "I/O" : "Memory", res->name, + (long long) res->start, (long long) res->end, + res_list_elem->name, + (long long) res_list_elem->start, + (long long) res_list_elem->end); + printk(KERN_INFO "ACPI: Device needs an ACPI driver\n"); + } + if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT) + return -EBUSY; + } + return 0; +} + +int acpi_check_region(resource_size_t start, resource_size_t n, + const char *name) +{ + struct resource res = { + .start = start, + .end = start + n - 1, + .name = name, + .flags = IORESOURCE_IO, + }; + + return acpi_check_resource_conflict(&res); +} +EXPORT_SYMBOL(acpi_check_region); + +int acpi_check_mem_region(resource_size_t start, resource_size_t n, + const char *name) +{ + struct resource res = { + .start = start, + .end = start + n - 1, + .name = name, + .flags = IORESOURCE_MEM, + }; + + return acpi_check_resource_conflict(&res); + +} +EXPORT_SYMBOL(acpi_check_mem_region); + /* * Acquire a spinlock. * @@ -1303,10 +1438,46 @@ acpi_status acpi_os_validate_address ( u8 space_id, acpi_physical_address address, - acpi_size length) + acpi_size length, + char *name) { + struct acpi_res_list *res; + if (acpi_enforce_resources == ENFORCE_RESOURCES_NO) + return AE_OK; - return AE_OK; + switch (space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + /* Only interference checks against SystemIO and SytemMemory + are needed */ + res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL); + if (!res) + return AE_OK; + /* ACPI names are fixed to 4 bytes, still better use strlcpy */ + strlcpy(res->name, name, 5); + res->start = address; + res->end = address + length - 1; + res->resource_type = space_id; + spin_lock(&acpi_res_lock); + list_add(&res->resource_list, &resource_list_head); + spin_unlock(&acpi_res_lock); + pr_debug("Added %s resource: start: 0x%llx, end: 0x%llx, " + "name: %s\n", (space_id == ACPI_ADR_SPACE_SYSTEM_IO) + ? "SystemIO" : "System Memory", + (unsigned long long)res->start, + (unsigned long long)res->end, + res->name); + break; + case ACPI_ADR_SPACE_PCI_CONFIG: + case ACPI_ADR_SPACE_EC: + case ACPI_ADR_SPACE_SMBUS: + case ACPI_ADR_SPACE_CMOS: + case ACPI_ADR_SPACE_PCI_BAR_TARGET: + case ACPI_ADR_SPACE_DATA_TABLE: + case ACPI_ADR_SPACE_FIXED_HARDWARE: + break; + } + return AE_OK; } #endif diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index ca882b8e7d10..c082c7de88a0 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -239,8 +239,8 @@ acpi_status acpi_os_validate_interface(char *interface); acpi_status acpi_osi_invalidate(char* interface); acpi_status -acpi_os_validate_address(u8 space_id, - acpi_physical_address address, acpi_size length); +acpi_os_validate_address(u8 space_id, acpi_physical_address address, + acpi_size length, char *name); u64 acpi_os_get_timer(void); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 63f2e6ed698f..893f90a5dea9 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -217,6 +217,11 @@ extern int pnpacpi_disabled; #define PXM_INVAL (-1) #define NID_INVAL (-1) +int acpi_check_region(resource_size_t start, resource_size_t n, + const char *name); +int acpi_check_mem_region(resource_size_t start, resource_size_t n, + const char *name); + #else /* CONFIG_ACPI */ static inline int acpi_boot_init(void) @@ -229,5 +234,17 @@ static inline int acpi_boot_table_init(void) return 0; } +static inline int acpi_check_region(resource_size_t start, resource_size_t n, + const char *name) +{ + return 0; +} + +static inline int acpi_check_mem_region(resource_size_t start, + resource_size_t n, const char *name) +{ + return 0; +} + #endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ From 443dea72d5f428170de6d6e3c4c1a1e2b7632b65 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Mon, 4 Feb 2008 23:31:23 -0800 Subject: [PATCH 090/112] ACPI: Export acpi_check_resource_conflict Export acpi_check_resource_conflict(), sometimes drivers already have a struct resource at hand so no need to use the wrappers to build a new one. Signed-off-by: Jean Delvare Cc: "Mark M. Hoffman" Cc: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/osl.c | 3 ++- include/linux/acpi.h | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 222f7b1b66f7..bc1604bfa4db 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1157,7 +1157,7 @@ __setup("acpi_enforce_resources=", acpi_enforce_resources_setup); /* Check for resource conflicts between ACPI OperationRegions and native * drivers */ -static int acpi_check_resource_conflict(struct resource *res) +int acpi_check_resource_conflict(struct resource *res) { struct acpi_res_list *res_list_elem; int ioport; @@ -1207,6 +1207,7 @@ static int acpi_check_resource_conflict(struct resource *res) } return 0; } +EXPORT_SYMBOL(acpi_check_resource_conflict); int acpi_check_region(resource_size_t start, resource_size_t n, const char *name) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 893f90a5dea9..a031df8c83ae 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -25,6 +25,7 @@ #ifndef _LINUX_ACPI_H #define _LINUX_ACPI_H +#include /* for struct resource */ #ifdef CONFIG_ACPI @@ -217,6 +218,8 @@ extern int pnpacpi_disabled; #define PXM_INVAL (-1) #define NID_INVAL (-1) +int acpi_check_resource_conflict(struct resource *res); + int acpi_check_region(resource_size_t start, resource_size_t n, const char *name); int acpi_check_mem_region(resource_size_t start, resource_size_t n, @@ -234,6 +237,11 @@ static inline int acpi_boot_table_init(void) return 0; } +static inline int acpi_check_resource_conflict(struct resource *res) +{ + return 0; +} + static inline int acpi_check_region(resource_size_t start, resource_size_t n, const char *name) { From 547266e46cc0b35ce51bd1f37f261d831927431f Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Tue, 5 Feb 2008 00:24:56 +0100 Subject: [PATCH 091/112] ACPI: thinkpad-acpi: second TP_EC_FAN_FULLSPEED should be TP_EC_FAN_AUTO fix bug in safety net for TPEC fan control mode eaa7571b2d1a08873e4bdd8e6db3431df61cd9ad Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 8ef0afc88693..7ba1acad5402 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -4790,7 +4790,7 @@ static int fan_set_level(int level) * or FULLSPEED mode bits and just ignore them */ if (level & TP_EC_FAN_FULLSPEED) level |= 7; /* safety min speed 7 */ - else if (level & TP_EC_FAN_FULLSPEED) + else if (level & TP_EC_FAN_AUTO) level |= 4; /* safety min speed 4 */ if (!acpi_ec_write(fan_status_offset, level)) From 23b168d425ca0ca25257ff8205a39f1c2d1b0f27 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 5 Feb 2008 19:27:12 +0100 Subject: [PATCH 092/112] PM: documentation cleanups Signed-off-by: Pavel Machek Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 6 ++++-- Documentation/power/swsusp.txt | 5 +++++ drivers/acpi/hardware/hwsleep.c | 2 +- drivers/acpi/sleep/main.c | 2 +- kernel/power/Kconfig | 9 ++++++--- 5 files changed, 17 insertions(+), 7 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8fd5aa40585f..8ea41b6e6a85 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -147,8 +147,10 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode } - See Documentation/power/video.txt + Format: { s3_bios, s3_mode, s3_beep } + See Documentation/power/video.txt for s3_bios and s3_mode. + s3_beep is for debugging; it makes the PC's speaker beep + as soon as the kernel's real-mode entry point is called. acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index aea7e9209667..9d60ab717a7b 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -386,6 +386,11 @@ before suspending; then remount them after resuming. There is a work-around for this problem. For more information, see Documentation/usb/persist.txt. +Q: Can I suspend-to-disk using a swap partition under LVM? + +A: No. You can suspend successfully, but you'll not be able to +resume. uswsusp should be able to work with LVM. See suspend.sf.net. + Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were compiled with the similar configuration files. Anyway I found that suspend to disk (and resume) is much slower on 2.6.16 compared to diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c index fd1c4ba63367..058d0be5cbe2 100644 --- a/drivers/acpi/hardware/hwsleep.c +++ b/drivers/acpi/hardware/hwsleep.c @@ -286,13 +286,13 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) } /* + * 1) Disable/Clear all GPEs * 2) Enable all wakeup GPEs */ status = acpi_hw_disable_all_gpes(); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } - acpi_gbl_system_awake_and_running = FALSE; status = acpi_hw_enable_all_wakeup_gpes(); diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 485de1347075..c9a733f36bd5 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -170,7 +170,7 @@ static int acpi_pm_enter(suspend_state_t pm_state) /* Reprogram control registers and execute _BFS */ acpi_leave_sleep_state_prep(acpi_state); - /* ACPI 3.0 specs (P62) says that it's the responsabilty + /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the * POWER_BUTTON event should not reach userspace ] */ diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index ef9b802738a5..79833170bb9c 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -74,8 +74,8 @@ config PM_TRACE_RTC RTC across reboots, so that you can debug a machine that just hangs during suspend (or more commonly, during resume). - To use this debugging feature you should attempt to suspend the machine, - then reboot it, then run + To use this debugging feature you should attempt to suspend the + machine, reboot it and then run dmesg -s 1000000 | grep 'hash matches' @@ -123,7 +123,10 @@ config HIBERNATION called "hibernation" in user interfaces. STD checkpoints the system and powers it off; and restores that checkpoint on reboot. - You can suspend your machine with 'echo disk > /sys/power/state'. + You can suspend your machine with 'echo disk > /sys/power/state' + after placing resume=/dev/swappartition on the kernel command line + in your bootloader's configuration file. + Alternatively, you can use the additional userland tools available from . From 2e906655baf1c6f6fccd212fc9e6499dc6928b80 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 31 Jan 2008 17:35:03 -0800 Subject: [PATCH 093/112] ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling acpi_safe_halt() needs interrupts to be disabled for atomic need_resched check and safe halt. Otherwise we may miss an interrupt and go into halt. acpi_safe_halt() also does not enable interrupts on all return paths. So the callers should handle enable and disable interrupts around it. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 199ea2146153..106a22948aa9 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -201,6 +201,10 @@ static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2) return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2); } +/* + * Callers should disable interrupts before the call and enable + * interrupts after return. + */ static void acpi_safe_halt(void) { current_thread_info()->status &= ~TS_POLLING; @@ -413,6 +417,8 @@ static void acpi_processor_idle(void) pm_idle_save(); else acpi_safe_halt(); + + local_irq_enable(); return; } @@ -521,6 +527,7 @@ static void acpi_processor_idle(void) * skew otherwise. */ sleep_ticks = 0xFFFFFFFF; + local_irq_enable(); break; case ACPI_STATE_C2: @@ -1403,11 +1410,13 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, if (unlikely(!pr)) return 0; + local_irq_disable(); if (pr->flags.bm_check) acpi_idle_update_bm_rld(pr, cx); acpi_safe_halt(); + local_irq_enable(); cx->usage++; return 0; @@ -1517,7 +1526,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (dev->safe_state) { return dev->safe_state->enter(dev, dev->safe_state); } else { + local_irq_disable(); acpi_safe_halt(); + local_irq_enable(); return 0; } } From bc71bec91f9875ef825d12104acf3bf4ca215fa4 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 31 Jan 2008 17:35:04 -0800 Subject: [PATCH 094/112] ACPI: enable MWAIT for C1 idle Add MWAIT idle for C1 state instead of halt, on platforms that support C1 state with MWAIT. Renames cx->space_id to something more appropriate. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 20 ++++++++++++-------- include/acpi/processor.h | 3 ++- 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 106a22948aa9..4ba3a9a473dd 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -265,7 +265,7 @@ static atomic_t c3_cpu_count; /* Common C-state entry for C2, C3, .. */ static void acpi_cstate_enter(struct acpi_processor_cx *cstate) { - if (cstate->space_id == ACPI_CSTATE_FFH) { + if (cstate->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cstate); } else { @@ -929,20 +929,20 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) cx.address = reg->address; cx.index = current_count + 1; - cx.space_id = ACPI_CSTATE_SYSTEMIO; + cx.entry_method = ACPI_CSTATE_SYSTEMIO; if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) { if (acpi_processor_ffh_cstate_probe (pr->id, &cx, reg) == 0) { - cx.space_id = ACPI_CSTATE_FFH; - } else if (cx.type != ACPI_STATE_C1) { + cx.entry_method = ACPI_CSTATE_FFH; + } else if (cx.type == ACPI_STATE_C1) { /* * C1 is a special case where FIXED_HARDWARE * can be handled in non-MWAIT way as well. * In that case, save this _CST entry info. - * That is, we retain space_id of SYSTEM_IO for - * halt based C1. * Otherwise, ignore this info and continue. */ + cx.entry_method = ACPI_CSTATE_HALT; + } else { continue; } } @@ -1376,12 +1376,16 @@ static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr, /** * acpi_idle_do_entry - a helper function that does C2 and C3 type entry * @cx: cstate data + * + * Caller disables interrupt before call and enables interrupt after return. */ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) { - if (cx->space_id == ACPI_CSTATE_FFH) { + if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); + } else if (cx->entry_method == ACPI_CSTATE_HALT) { + acpi_safe_halt(); } else { int unused; /* IO port based C-state */ @@ -1414,7 +1418,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, if (pr->flags.bm_check) acpi_idle_update_bm_rld(pr, cx); - acpi_safe_halt(); + acpi_idle_do_entry(cx); local_irq_enable(); cx->usage++; diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 6e253b5b0f3b..f6d7c508917c 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -34,6 +34,7 @@ #define ACPI_CSTATE_SYSTEMIO (0) #define ACPI_CSTATE_FFH (1) +#define ACPI_CSTATE_HALT (2) /* Power Management */ @@ -64,7 +65,7 @@ struct acpi_processor_cx { u8 valid; u8 type; u32 address; - u8 space_id; + u8 entry_method; u8 index; u32 latency; u32 latency_ticks; From 9b12e18cdc1553de62d931e73443c806347cd974 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 31 Jan 2008 17:35:05 -0800 Subject: [PATCH 095/112] ACPI: cpuidle: Support C1 idle time accounting Show C1 idle time in /sysfs cpuidle interface. C1 idle time may not be entirely accurate in all cases. It includes the time spent in the interrupt handler after wakeup with "hlt" based C1. But, it will be accurate with "mwait" based C1. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 4ba3a9a473dd..fea71597b40a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1407,8 +1407,10 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) static int acpi_idle_enter_c1(struct cpuidle_device *dev, struct cpuidle_state *state) { + u32 t1, t2; struct acpi_processor *pr; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); + pr = processors[smp_processor_id()]; if (unlikely(!pr)) @@ -1418,12 +1420,14 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, if (pr->flags.bm_check) acpi_idle_update_bm_rld(pr, cx); + t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); acpi_idle_do_entry(cx); + t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); local_irq_enable(); cx->usage++; - return 0; + return ticks_elapsed_in_us(t1, t2); } /** @@ -1660,6 +1664,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) switch (cx->type) { case ACPI_STATE_C1: state->flags |= CPUIDLE_FLAG_SHALLOW; + state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_c1; dev->safe_state = state; break; From 9a0b841586c3c6c846effdbe75885c2ebc0031b0 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 31 Jan 2008 17:35:06 -0800 Subject: [PATCH 096/112] cpuidle: Add a poll_idle method Add a default poll idle state with 0 latency. Provides an option to users to use poll_idle by using 0 as the latency requirement. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- arch/x86/Kconfig | 3 +++ drivers/acpi/processor_idle.c | 4 +++- drivers/cpuidle/cpuidle.c | 41 +++++++++++++++++++++++++++++++++++ include/linux/cpuidle.h | 13 ++++++++--- 4 files changed, 57 insertions(+), 4 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e6728bd61cc1..fd4265007053 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -105,6 +105,9 @@ config GENERIC_TIME_VSYSCALL bool default X86_64 +config ARCH_HAS_CPU_RELAX + def_bool y + config HAVE_SETUP_PER_CPU_AREA def_bool X86_64 diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index fea71597b40a..32488e6f76ab 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1628,7 +1628,7 @@ struct cpuidle_driver acpi_idle_driver = { */ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) { - int i, count = 0; + int i, count = CPUIDLE_DRIVER_STATE_START; struct acpi_processor_cx *cx; struct cpuidle_state *state; struct cpuidle_device *dev = &pr->power.dev; @@ -1687,6 +1687,8 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) } count++; + if (count == CPUIDLE_STATE_MAX) + break; } dev->state_count = count; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 2a98d99cbd46..2c4b2d47973e 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "cpuidle.h" @@ -180,6 +181,44 @@ void cpuidle_disable_device(struct cpuidle_device *dev) EXPORT_SYMBOL_GPL(cpuidle_disable_device); +#ifdef CONFIG_ARCH_HAS_CPU_RELAX +static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st) +{ + ktime_t t1, t2; + s64 diff; + int ret; + + t1 = ktime_get(); + local_irq_enable(); + while (!need_resched()) + cpu_relax(); + + t2 = ktime_get(); + diff = ktime_to_us(ktime_sub(t2, t1)); + if (diff > INT_MAX) + diff = INT_MAX; + + ret = (int) diff; + return ret; +} + +static void poll_idle_init(struct cpuidle_device *dev) +{ + struct cpuidle_state *state = &dev->states[0]; + + cpuidle_set_statedata(state, NULL); + + snprintf(state->name, CPUIDLE_NAME_LEN, "C0 (poll idle)"); + state->exit_latency = 0; + state->target_residency = 0; + state->power_usage = -1; + state->flags = CPUIDLE_FLAG_POLL | CPUIDLE_FLAG_TIME_VALID; + state->enter = poll_idle; +} +#else +static void poll_idle_init(struct cpuidle_device *dev) {} +#endif /* CONFIG_ARCH_HAS_CPU_RELAX */ + /** * cpuidle_register_device - registers a CPU's idle PM feature * @dev: the cpu @@ -198,6 +237,8 @@ int cpuidle_register_device(struct cpuidle_device *dev) mutex_lock(&cpuidle_lock); + poll_idle_init(dev); + per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); if ((ret = cpuidle_add_sysfs(sys_dev))) { diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index b0fd85ab9efb..385d45b616db 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -46,9 +46,10 @@ struct cpuidle_state { /* Idle State Flags */ #define CPUIDLE_FLAG_TIME_VALID (0x01) /* is residency time measurable? */ #define CPUIDLE_FLAG_CHECK_BM (0x02) /* BM activity will exit state */ -#define CPUIDLE_FLAG_SHALLOW (0x10) /* low latency, minimal savings */ -#define CPUIDLE_FLAG_BALANCED (0x20) /* medium latency, moderate savings */ -#define CPUIDLE_FLAG_DEEP (0x40) /* high latency, large savings */ +#define CPUIDLE_FLAG_POLL (0x10) /* no latency, no savings */ +#define CPUIDLE_FLAG_SHALLOW (0x20) /* low latency, minimal savings */ +#define CPUIDLE_FLAG_BALANCED (0x40) /* medium latency, moderate savings */ +#define CPUIDLE_FLAG_DEEP (0x80) /* high latency, large savings */ #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000) @@ -178,4 +179,10 @@ static inline void cpuidle_unregister_governor(struct cpuidle_governor *gov) { } #endif +#ifdef CONFIG_ARCH_HAS_CPU_RELAX +#define CPUIDLE_DRIVER_STATE_START 1 +#else +#define CPUIDLE_DRIVER_STATE_START 0 +#endif + #endif /* _LINUX_CPUIDLE_H */ From 8a681a4dee07ea09aedaadc6a2da28d2131dc414 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 25 Jan 2008 14:47:49 +0800 Subject: [PATCH 097/112] ACPI: video: create "brightness_switch_enabled" modparam Introduce new module parameter for brightness control. "brightness_switch_enabled" is set by default which means nothing changes upon brightness switch events. When "brightness_switch_enabled" is cleared via "echo 0 > /sys/module/video/parameters/brightness_switch_enabled", ACPI will not try to change the brightness level any more. Either X will take charge of this or users can change the brightness level by poking /sys/class/backlight/acpi_videoX/... Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bd77e81e81c1..b1a56bf682ae 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -72,6 +72,9 @@ MODULE_AUTHOR("Bruno Ducrot"); MODULE_DESCRIPTION("ACPI Video Driver"); MODULE_LICENSE("GPL"); +static int brightness_switch_enabled = 1; +module_param(brightness_switch_enabled, bool, 0644); + static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); @@ -1850,27 +1853,32 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) switch (event) { case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS: /* Cycle brightness */ - acpi_video_switch_brightness(video_device, event); + if (brightness_switch_enabled) + acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_BRIGHTNESS_CYCLE; break; case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS: /* Increase brightness */ - acpi_video_switch_brightness(video_device, event); + if (brightness_switch_enabled) + acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_BRIGHTNESSUP; break; case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS: /* Decrease brightness */ - acpi_video_switch_brightness(video_device, event); + if (brightness_switch_enabled) + acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_BRIGHTNESSDOWN; break; case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */ - acpi_video_switch_brightness(video_device, event); + if (brightness_switch_enabled) + acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_BRIGHTNESS_ZERO; break; case ACPI_VIDEO_NOTIFY_DISPLAY_OFF: /* display device off */ - acpi_video_switch_brightness(video_device, event); + if (brightness_switch_enabled) + acpi_video_switch_brightness(video_device, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_DISPLAY_OFF; break; From ba5e1223422368fd2f4dbb0745f5fbb5fe9a65f1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 25 Jan 2008 14:47:57 +0800 Subject: [PATCH 098/112] ACPI: video: delete unused display switch on hotkey event code Display switching via ACPI control methods are not known to work on any platforms. Further, the X community wants to control the display switching all by themselves without BIOS/AML involvement. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 63 -------------------------------------------- 1 file changed, 63 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index b1a56bf682ae..d4b4b52facba 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -276,7 +276,6 @@ static void acpi_video_device_rebind(struct acpi_video_bus *video); static void acpi_video_device_bind(struct acpi_video_bus *video, struct acpi_video_device *device); static int acpi_video_device_enumerate(struct acpi_video_bus *video); -static int acpi_video_switch_output(struct acpi_video_bus *video, int event); static int acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level); static int acpi_video_device_lcd_get_level_current( @@ -1583,64 +1582,6 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video) return status; } -/* - * Arg: - * video : video bus device - * event : notify event - * - * Return: - * < 0 : error - * - * 1. Find out the current active output device. - * 2. Identify the next output device to switch to. - * 3. call _DSS to do actual switch. - */ - -static int acpi_video_switch_output(struct acpi_video_bus *video, int event) -{ - struct list_head *node; - struct acpi_video_device *dev = NULL; - struct acpi_video_device *dev_next = NULL; - struct acpi_video_device *dev_prev = NULL; - unsigned long state; - int status = 0; - - mutex_lock(&video->device_list_lock); - - list_for_each(node, &video->video_device_list) { - dev = container_of(node, struct acpi_video_device, entry); - status = acpi_video_device_get_state(dev, &state); - if (state & 0x2) { - dev_next = container_of(node->next, - struct acpi_video_device, entry); - dev_prev = container_of(node->prev, - struct acpi_video_device, entry); - goto out; - } - } - - dev_next = container_of(node->next, struct acpi_video_device, entry); - dev_prev = container_of(node->prev, struct acpi_video_device, entry); - - out: - mutex_unlock(&video->device_list_lock); - - switch (event) { - case ACPI_VIDEO_NOTIFY_CYCLE: - case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT: - acpi_video_device_set_state(dev, 0); - acpi_video_device_set_state(dev_next, 0x80000001); - break; - case ACPI_VIDEO_NOTIFY_PREV_OUTPUT: - acpi_video_device_set_state(dev, 0); - acpi_video_device_set_state(dev_prev, 0x80000001); - default: - break; - } - - return status; -} - static int acpi_video_get_next_level(struct acpi_video_device *device, u32 level_current, u32 event) @@ -1800,23 +1741,19 @@ static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data) * connector. */ acpi_video_device_enumerate(video); acpi_video_device_rebind(video); - acpi_video_switch_output(video, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_SWITCHVIDEOMODE; break; case ACPI_VIDEO_NOTIFY_CYCLE: /* Cycle Display output hotkey pressed. */ - acpi_video_switch_output(video, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_SWITCHVIDEOMODE; break; case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT: /* Next Display output hotkey pressed. */ - acpi_video_switch_output(video, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_VIDEO_NEXT; break; case ACPI_VIDEO_NOTIFY_PREV_OUTPUT: /* previous Display output hotkey pressed. */ - acpi_video_switch_output(video, event); acpi_bus_generate_proc_event(device, event, 0); keycode = KEY_VIDEO_PREV; break; From 9ee85241fdaab358dff1d8647f20a478cfa512a1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 25 Jan 2008 14:48:06 +0800 Subject: [PATCH 099/112] ACPI: create notifier chain to get hotkey events to graphics driver Kernel mode graphics drivers need this ACPI notifier chaine so that they can get notified upon hotkey events. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/event.c | 28 ++++++++++++++++++++++++++++ include/acpi/acpi_bus.h | 3 +++ 2 files changed, 31 insertions(+) diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c index 5c95863f8fa9..5479dc0eeeec 100644 --- a/drivers/acpi/event.c +++ b/drivers/acpi/event.c @@ -109,6 +109,34 @@ static const struct file_operations acpi_system_event_ops = { }; #endif /* CONFIG_ACPI_PROC_EVENT */ +/* ACPI notifier chain */ +BLOCKING_NOTIFIER_HEAD(acpi_chain_head); + +int acpi_notifier_call_chain(struct acpi_device *dev, u32 type, u32 data) +{ + struct acpi_bus_event event; + + strcpy(event.device_class, dev->pnp.device_class); + strcpy(event.bus_id, dev->pnp.bus_id); + event.type = type; + event.data = data; + return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event) + == NOTIFY_BAD) ? -EINVAL : 0; +} +EXPORT_SYMBOL(acpi_notifier_call_chain); + +int register_acpi_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&acpi_chain_head, nb); +} +EXPORT_SYMBOL(register_acpi_notifier); + +int unregister_acpi_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&acpi_chain_head, nb); +} +EXPORT_SYMBOL(unregister_acpi_notifier); + #ifdef CONFIG_NET static unsigned int acpi_event_seqnum; struct acpi_genl_event { diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index fb7171b1bd22..3f9f1417ff09 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -321,6 +321,9 @@ struct acpi_bus_event { extern struct kobject *acpi_kobj; extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int); +extern int acpi_notifier_call_chain(struct acpi_device *, u32, u32); +extern int register_acpi_notifier(struct notifier_block *); +extern int unregister_acpi_notifier(struct notifier_block *); /* * External Functions */ From 7761f638f6e0f276fe8612ba306d09c40d1b553c Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 25 Jan 2008 14:48:12 +0800 Subject: [PATCH 100/112] ACPI: video: call ACPI notifier chain for ACPI video notifications Call notifier chain for display/brightness switch events. The kernel mode graphics driver is interested in this. Sign-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index d4b4b52facba..74ff0faeab57 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1765,6 +1765,7 @@ static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data) break; } + acpi_notifier_call_chain(device, event, 0); input_report_key(input, keycode, 1); input_sync(input); input_report_key(input, keycode, 0); @@ -1826,6 +1827,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) break; } + acpi_notifier_call_chain(device, event, 0); input_report_key(input, keycode, 1); input_sync(input); input_report_key(input, keycode, 0); From 863c1490e512db40dab61e44b694a493a9e68b3f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 4 Feb 2008 23:31:24 -0800 Subject: [PATCH 101/112] ACPI: video: reset brightness on resume Some machines seem to need the backlight brightness to be reset on resume. Add support for doing so to the video module. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Matthew Garrett Cc: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/video.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 74ff0faeab57..b5e35cd559ea 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -77,6 +77,7 @@ module_param(brightness_switch_enabled, bool, 0644); static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); +static int acpi_video_resume(struct acpi_device *device); static const struct acpi_device_id video_device_ids[] = { {ACPI_VIDEO_HID, 0}, @@ -91,6 +92,7 @@ static struct acpi_driver acpi_video_bus = { .ops = { .add = acpi_video_bus_add, .remove = acpi_video_bus_remove, + .resume = acpi_video_resume, }, }; @@ -1837,6 +1839,25 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) } static int instance; +static int acpi_video_resume(struct acpi_device *device) +{ + struct acpi_video_bus *video; + struct acpi_video_device *video_device; + int i; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + video = acpi_driver_data(device); + + for (i = 0; i < video->attached_count; i++) { + video_device = video->attached_array[i].bind_info; + if (video_device && video_device->backlight) + acpi_video_set_brightness(video_device->backlight); + } + return AE_OK; +} + static int acpi_video_bus_add(struct acpi_device *device) { acpi_status status; From 3fa2cdcc45a0176de15cac9dbf4ed2834ebf8932 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 7 Feb 2008 01:44:06 +0000 Subject: [PATCH 102/112] ACPI: video: Ignore ACPI video devices that aren't present in hardware Vendors often ship machines with a choice of integrated or discrete graphics, and use the same DSDT for both. As a result, the ACPI video module will locate devices that may not exist on this specific platform. Attempt to determine whether the device exists or not, and abort the device creation if it do not exist. Signed-off-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/acpi/video.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index b5e35cd559ea..970c01a7f8f4 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -730,11 +730,40 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - + long device_id; + struct device *dev; + struct acpi_device *device; if (!video) return -EINVAL; + device = video->device; + + status = + acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); + + if (!ACPI_SUCCESS(status)) + return -ENODEV; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a video device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(device->handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(device->handle, &phandle)) + return -ENODEV; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return -ENODEV; + put_device(dev); + /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ From 4e83dd95b343a4ecfdb236aa046a5366a29e6f1e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 23 Nov 2007 18:33:11 -0500 Subject: [PATCH 103/112] ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build 798d91039849486c7a4f1a458a5680cb55a65408 (ACPI: create CONFIG_ACPI_DEBUG_FUNC_TRACE) failed to associate the new tracing config option with the tracing code. Signed-off-by: Len Brown --- include/acpi/acmacros.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index 45662f6dbdb6..99d171c87c84 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -486,7 +486,7 @@ #define ACPI_FUNCTION_NAME(name) #endif -#ifdef DEBUG_FUNC_TRACE +#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE #define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \ acpi_ut_trace(ACPI_DEBUG_PARAMETERS) @@ -565,7 +565,7 @@ #endif /* ACPI_SIMPLE_RETURN_MACROS */ -#else /* !DEBUG_FUNC_TRACE */ +#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */ #define ACPI_FUNCTION_TRACE(a) #define ACPI_FUNCTION_TRACE_PTR(a,b) @@ -584,7 +584,7 @@ #define return_UINT32(s) return(s) #define return_PTR(s) return(s) -#endif /* DEBUG_FUNC_TRACE */ +#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */ /* Conditional execution */ From ee1ce6fcb383ba1da9d16e1ba902f592211aa508 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 6 Dec 2007 22:00:36 -0500 Subject: [PATCH 104/112] ACPI: cleanup acpi.h Two cleanups to : * Stop defining acpi_mp_config, it isn't used anywhere. * Discard nested "#ifdef CONFIG_ACPI", they are useless and error-prone. Signed-off-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/linux/acpi.h | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 63f2e6ed698f..ff68f13a9377 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -43,8 +43,6 @@ #include -#ifdef CONFIG_ACPI - enum acpi_irq_model_id { ACPI_IRQ_MODEL_PIC = 0, ACPI_IRQ_MODEL_IOAPIC, @@ -116,20 +114,12 @@ int acpi_unmap_lsapic(int cpu); int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); -extern int acpi_mp_config; - extern struct acpi_mcfg_allocation *pci_mmcfg_config; extern int pci_mmcfg_config_num; extern int sbf_port; extern unsigned long acpi_realmode_flags; -#else /* !CONFIG_ACPI */ - -#define acpi_mp_config 0 - -#endif /* !CONFIG_ACPI */ - int acpi_register_gsi (u32 gsi, int triggering, int polarity); int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); @@ -145,8 +135,6 @@ extern int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity); */ void acpi_unregister_gsi (u32 gsi); -#ifdef CONFIG_ACPI - struct acpi_prt_entry { struct list_head node; struct acpi_pci_id id; @@ -179,8 +167,6 @@ struct acpi_pci_driver { int acpi_pci_register_driver(struct acpi_pci_driver *driver); void acpi_pci_unregister_driver(struct acpi_pci_driver *driver); -#endif /* CONFIG_ACPI */ - #ifdef CONFIG_ACPI_EC extern int ec_read(u8 addr, u8 *val); From 87ecd5cddaa37f057d8d8c2813e1b748b1804423 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 1 Jan 2008 14:00:00 -0500 Subject: [PATCH 105/112] ACPI: add missing prink prefix strings Signed-off-by: Len Brown --- drivers/acpi/scan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index d9d531cce27f..78a82b3c7b60 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -59,7 +59,7 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias, count = snprintf(&modalias[len], size, "%s:", cid_list->id[i].value); if (count < 0 || count >= size) { - printk(KERN_ERR "acpi: %s cid[%i] exceeds event buffer size", + printk(KERN_ERR PREFIX "%s cid[%i] exceeds event buffer size", acpi_dev->pnp.device_name, i); break; } @@ -453,7 +453,7 @@ static int acpi_device_register(struct acpi_device *device, device->dev.release = &acpi_device_release; result = device_add(&device->dev); if(result) { - printk("Error adding device %s", device->dev.bus_id); + printk(KERN_ERR PREFIX "Error adding device %s", device->dev.bus_id); goto end; } @@ -956,7 +956,7 @@ static void acpi_device_set_id(struct acpi_device *device, case ACPI_BUS_TYPE_DEVICE: status = acpi_get_object_info(handle, &buffer); if (ACPI_FAILURE(status)) { - printk("%s: Error reading device info\n", __FUNCTION__); + printk(KERN_ERR PREFIX "%s: Error reading device info\n", __FUNCTION__); return; } @@ -1026,7 +1026,7 @@ static void acpi_device_set_id(struct acpi_device *device, if (device->pnp.cid_list) memcpy(device->pnp.cid_list, cid_list, cid_list->size); else - printk(KERN_ERR "Memory allocation error\n"); + printk(KERN_ERR PREFIX "Memory allocation error\n"); } kfree(buffer.pointer); @@ -1050,7 +1050,7 @@ static int acpi_device_set_context(struct acpi_device *device, int type) acpi_bus_data_handler, device); if (ACPI_FAILURE(status)) { - printk("Error attaching device data\n"); + printk(KERN_ERR PREFIX "Error attaching device data\n"); result = -ENODEV; } } From e5685b9d35c2cc0a98425b05df30cb837dd1e632 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Oct 2007 18:24:42 +0200 Subject: [PATCH 106/112] ACPI: misc cleanups This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: Adrian Bunk Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 4 ---- arch/x86/kernel/acpi/boot.c | 3 --- drivers/acpi/bay.c | 4 ++-- drivers/acpi/bus.c | 1 - drivers/acpi/dock.c | 8 ++++---- drivers/acpi/glue.c | 4 ---- drivers/acpi/numa.c | 3 ++- drivers/acpi/osl.c | 18 ------------------ drivers/acpi/pci_bind.c | 4 +++- drivers/acpi/pci_irq.c | 2 -- drivers/acpi/pci_link.c | 2 +- drivers/acpi/sbs.c | 2 +- drivers/acpi/sbshc.c | 4 ++-- include/acpi/acpi_drivers.h | 1 - include/acpi/acpi_numa.h | 1 - 15 files changed, 15 insertions(+), 46 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 00b5d08f6da8..78206f1b71d2 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -601,8 +601,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) IOSAPIC_LEVEL); } -EXPORT_SYMBOL(acpi_register_gsi); - void acpi_unregister_gsi(u32 gsi) { if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) @@ -611,8 +609,6 @@ void acpi_unregister_gsi(u32 gsi) iosapic_unregister_intr(gsi); } -EXPORT_SYMBOL(acpi_unregister_gsi); - static int __init acpi_parse_fadt(struct acpi_table_header *table) { struct acpi_table_header *fadt_header; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index d2a58431a074..529e52df4e1d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -78,7 +78,6 @@ int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; int acpi_ioapic; int acpi_strict; -EXPORT_SYMBOL(acpi_strict); u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; @@ -490,8 +489,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) return irq; } -EXPORT_SYMBOL(acpi_register_gsi); - /* * ACPI based hotplug support for CPU */ diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index 6daf6088ac88..0c81294ac489 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -128,7 +128,7 @@ static ssize_t show_present(struct device *dev, return snprintf(buf, PAGE_SIZE, "%d\n", bay_present(bay)); } -DEVICE_ATTR(present, S_IRUGO, show_present, NULL); +static DEVICE_ATTR(present, S_IRUGO, show_present, NULL); /* * write_eject - write method for "eject" file in sysfs @@ -144,7 +144,7 @@ static ssize_t write_eject(struct device *dev, struct device_attribute *attr, eject_device(bay->handle); return count; } -DEVICE_ATTR(eject, S_IWUSR, NULL, write_eject); +static DEVICE_ATTR(eject, S_IWUSR, NULL, write_eject); /** * is_ata - see if a device is an ata device diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 1b4cf984b081..2994bb2b22e9 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -366,7 +366,6 @@ int acpi_bus_receive_event(struct acpi_bus_event *event) return 0; } -EXPORT_SYMBOL(acpi_bus_receive_event); #endif /* CONFIG_ACPI_PROC_EVENT */ /* -------------------------------------------------------------------------- diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 1dabdf4c07b3..7e47a981cc27 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -680,7 +680,7 @@ static ssize_t show_docked(struct device *dev, return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station)); } -DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL); +static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL); /* * show_flags - read method for flags file in sysfs @@ -691,7 +691,7 @@ static ssize_t show_flags(struct device *dev, return snprintf(buf, PAGE_SIZE, "%d\n", dock_station->flags); } -DEVICE_ATTR(flags, S_IRUGO, show_flags, NULL); +static DEVICE_ATTR(flags, S_IRUGO, show_flags, NULL); /* * write_undock - write method for "undock" file in sysfs @@ -707,7 +707,7 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr, ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST); return ret ? ret: count; } -DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock); +static DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock); /* * show_dock_uid - read method for "uid" file in sysfs @@ -723,7 +723,7 @@ static ssize_t show_dock_uid(struct device *dev, return snprintf(buf, PAGE_SIZE, "%lx\n", lbuf); } -DEVICE_ATTR(uid, S_IRUGO, show_dock_uid, NULL); +static DEVICE_ATTR(uid, S_IRUGO, show_dock_uid, NULL); /** * dock_add - add a new dock station diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 4893e256e399..eda0978b57c6 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -36,8 +36,6 @@ int register_acpi_bus_type(struct acpi_bus_type *type) return -ENODEV; } -EXPORT_SYMBOL(register_acpi_bus_type); - int unregister_acpi_bus_type(struct acpi_bus_type *type) { if (acpi_disabled) @@ -53,8 +51,6 @@ int unregister_acpi_bus_type(struct acpi_bus_type *type) return -ENODEV; } -EXPORT_SYMBOL(unregister_acpi_bus_type); - static struct acpi_bus_type *acpi_get_bus_type(struct bus_type *type) { struct acpi_bus_type *tmp, *ret = NULL; diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 0822d9fc1cb4..5d59cb33b1a5 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -78,6 +78,7 @@ int acpi_map_pxm_to_node(int pxm) return node; } +#if 0 void __cpuinit acpi_unmap_pxm_to_node(int node) { int pxm = node_to_pxm_map[node]; @@ -85,6 +86,7 @@ void __cpuinit acpi_unmap_pxm_to_node(int node) node_to_pxm_map[node] = PXM_INVAL; node_clear(node, nodes_found_map); } +#endif /* 0 */ static void __init acpi_table_print_srat_entry(struct acpi_subtable_header *header) @@ -247,7 +249,6 @@ int acpi_get_pxm(acpi_handle h) } while (ACPI_SUCCESS(status)); return -1; } -EXPORT_SYMBOL(acpi_get_pxm); int acpi_get_node(acpi_handle *handle) { diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e53fb516f9d4..7fcacc5ed821 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -219,8 +219,6 @@ void acpi_os_printf(const char *fmt, ...) va_end(args); } -EXPORT_SYMBOL(acpi_os_printf); - void acpi_os_vprintf(const char *fmt, va_list args) { static char buffer[512]; @@ -384,8 +382,6 @@ void acpi_os_sleep(acpi_integer ms) schedule_timeout_interruptible(msecs_to_jiffies(ms)); } -EXPORT_SYMBOL(acpi_os_sleep); - void acpi_os_stall(u32 us) { while (us) { @@ -399,8 +395,6 @@ void acpi_os_stall(u32 us) } } -EXPORT_SYMBOL(acpi_os_stall); - /* * Support ACPI 3.0 AML Timer operand * Returns 64-bit free-running, monotonically increasing timer @@ -550,8 +544,6 @@ acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, return (result ? AE_ERROR : AE_OK); } -EXPORT_SYMBOL(acpi_os_read_pci_configuration); - acpi_status acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, acpi_integer value, u32 width) @@ -793,8 +785,6 @@ acpi_os_create_semaphore(u32 max_units, u32 initial_units, acpi_handle * handle) return AE_OK; } -EXPORT_SYMBOL(acpi_os_create_semaphore); - /* * TODO: A better way to delete semaphores? Linux doesn't have a * 'delete_semaphore()' function -- may result in an invalid @@ -818,8 +808,6 @@ acpi_status acpi_os_delete_semaphore(acpi_handle handle) return AE_OK; } -EXPORT_SYMBOL(acpi_os_delete_semaphore); - /* * TODO: The kernel doesn't have a 'down_timeout' function -- had to * improvise. The process is to sleep for one scheduler quantum @@ -912,8 +900,6 @@ acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout) return status; } -EXPORT_SYMBOL(acpi_os_wait_semaphore); - /* * TODO: Support for units > 1? */ @@ -936,8 +922,6 @@ acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units) return AE_OK; } -EXPORT_SYMBOL(acpi_os_signal_semaphore); - #ifdef ACPI_FUTURE_USAGE u32 acpi_os_get_line(char *buffer) { @@ -981,8 +965,6 @@ acpi_status acpi_os_signal(u32 function, void *info) return AE_OK; } -EXPORT_SYMBOL(acpi_os_signal); - static int __init acpi_os_name_setup(char *str) { char *p = acpi_os_name; diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 388300de005d..4b252ea0e952 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -44,6 +44,8 @@ struct acpi_pci_data { struct pci_dev *dev; }; +static int acpi_pci_unbind(struct acpi_device *device); + static void acpi_pci_data_handler(acpi_handle handle, u32 function, void *context) { @@ -267,7 +269,7 @@ int acpi_pci_bind(struct acpi_device *device) return result; } -int acpi_pci_unbind(struct acpi_device *device) +static int acpi_pci_unbind(struct acpi_device *device) { int result = 0; acpi_status status = AE_OK; diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 62010c2481b3..822947339df1 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -478,8 +478,6 @@ int acpi_pci_irq_enable(struct pci_dev *dev) return 0; } -EXPORT_SYMBOL(acpi_pci_irq_enable); - /* FIXME: implement x86/x86_64 version */ void __attribute__ ((weak)) acpi_unregister_gsi(u32 i) { diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 5400ea173f6f..233c40c51684 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -95,7 +95,7 @@ static struct { int count; struct list_head entries; } acpi_link; -DEFINE_MUTEX(acpi_link_lock); +static DEFINE_MUTEX(acpi_link_lock); /* -------------------------------------------------------------------------- PCI Link Device Management diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index f136c7d3b3c2..1194105cc3ca 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -888,7 +888,7 @@ static void acpi_charger_remove(struct acpi_sbs *sbs) #endif } -void acpi_sbs_callback(void *context) +static void acpi_sbs_callback(void *context) { int id; struct acpi_sbs *sbs = context; diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index fd40b6a1d639..ae9a90438e2f 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -111,8 +111,8 @@ static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout) return -ETIME; } -int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol, u8 address, - u8 command, u8 *data, u8 length) +static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol, + u8 address, u8 command, u8 *data, u8 length) { int ret = -EFAULT, i; u8 temp, sz = 0; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index f85f77a538aa..a77196bcb993 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -73,7 +73,6 @@ struct pci_bus; acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id); int acpi_pci_bind(struct acpi_device *device); -int acpi_pci_unbind(struct acpi_device *device); int acpi_pci_bind_root(struct acpi_device *device, struct acpi_pci_id *id, struct pci_bus *bus); diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index 62c5ee4311da..173972672175 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -15,7 +15,6 @@ extern int pxm_to_node(int); extern int node_to_pxm(int); extern void __acpi_map_pxm_to_node(int, int); extern int acpi_map_pxm_to_node(int); -extern void __cpuinit acpi_unmap_pxm_to_node(int); #endif /* CONFIG_ACPI_NUMA */ #endif /* __ACP_NUMA_H */ From 9e52797131e83688f66fbca6d4cd25b83f33c48f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 3 Jan 2008 16:31:42 +0000 Subject: [PATCH 107/112] ACPI: its a directory not a folder.... The kernel help consistently uses 'directory' Signed-off-by: Alan Cox Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ccf6ea95f68c..95588c2a77d8 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -68,26 +68,28 @@ config ACPI_PROCFS Say N to delete /proc/acpi/ files that have moved to /sys/ config ACPI_PROCFS_POWER - bool "Deprecated power /proc/acpi folders" + bool "Deprecated power /proc/acpi directories" depends on PROC_FS default y ---help--- For backwards compatibility, this option allows - deprecated power /proc/acpi/ folders to exist, even when + deprecated power /proc/acpi/ directories to exist, even when they have been replaced by functions in /sys. - The deprecated folders (and their replacements) include: + The deprecated directories (and their replacements) include: /proc/acpi/battery/* (/sys/class/power_supply/*) /proc/acpi/ac_adapter/* (sys/class/power_supply/*) - This option has no effect on /proc/acpi/ folders + This option has no effect on /proc/acpi/ directories and functions, which do not yet exist in /sys - Say N to delete power /proc/acpi/ folders that have moved to /sys/ + Say N to delete power /proc/acpi/ directories that have moved to /sys/ + config ACPI_SYSFS_POWER bool "Future power /sys interface" select POWER_SUPPLY default y ---help--- Say N to disable power /sys interface + config ACPI_PROC_EVENT bool "Deprecated /proc/acpi/event support" depends on PROC_FS From 9cbc7960288d28aec95257af59854e1d14ba23b8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Tue, 5 Feb 2008 00:04:58 +0100 Subject: [PATCH 108/112] ACPI: Add "acpi_no_initrd_override" kernel parameter The acpi_no_initrd_override parameter permits to disable the load of an ACPI table from the initramfs. Signed-off-by: Eric Piel Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 3 +++ drivers/acpi/osl.c | 16 +++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8fd5aa40585f..ef2316a1a731 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -175,6 +175,9 @@ and is between 256 and 4096 characters. It is defined in the file acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT + acpi_no_initrd_override [KNL,ACPI] + Disable loading custom ACPI tables from the initramfs + acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS Format: To spoof as Windows 98: ="Microsoft Windows" diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index bbd8360bfb23..2b41bdddbeb6 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -77,6 +77,10 @@ static struct workqueue_struct *kacpi_notify_wq; #define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ static char osi_additional_string[OSI_STRING_LENGTH_MAX]; +#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD +static int acpi_no_initrd_override; +#endif + /* * "Ode to _OSI(Linux)" * @@ -386,7 +390,8 @@ acpi_os_table_override(struct acpi_table_header * existing_table, *new_table = (struct acpi_table_header *)AmlCode; #endif #ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD - if (strncmp(existing_table->signature, "DSDT", 4) == 0) { + if ((strncmp(existing_table->signature, "DSDT", 4) == 0) && + !acpi_no_initrd_override) { struct acpi_table_header *initrd_table = acpi_find_dsdt_initrd(); if (initrd_table) *new_table = initrd_table; @@ -402,6 +407,15 @@ acpi_os_table_override(struct acpi_table_header * existing_table, return AE_OK; } +#ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD +int __init acpi_no_initrd_override_setup(char *s) +{ + acpi_no_initrd_override = 1; + return 1; +} +__setup("acpi_no_initrd_override", acpi_no_initrd_override_setup); +#endif + static irqreturn_t acpi_irq(int irq, void *dev_id) { return (*acpi_irq_handler) (acpi_irq_context) ? IRQ_HANDLED : IRQ_NONE; From d89e9d6b4930c6505ac3ed35f57ab7f4311d6cf6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Feb 2008 19:28:02 -0500 Subject: [PATCH 109/112] ACPI: update DSDT override documentation Signed-off-by: Len Brown --- Documentation/acpi/dsdt-initrd.txt | 99 ------------------------ Documentation/acpi/dsdt-override.txt | 15 ++++ Documentation/acpi/initramfs-add-dsdt.sh | 43 ++++++++++ drivers/acpi/Kconfig | 20 ++--- 4 files changed, 66 insertions(+), 111 deletions(-) delete mode 100644 Documentation/acpi/dsdt-initrd.txt create mode 100644 Documentation/acpi/dsdt-override.txt create mode 100755 Documentation/acpi/initramfs-add-dsdt.sh diff --git a/Documentation/acpi/dsdt-initrd.txt b/Documentation/acpi/dsdt-initrd.txt deleted file mode 100644 index 736043359dfb..000000000000 --- a/Documentation/acpi/dsdt-initrd.txt +++ /dev/null @@ -1,99 +0,0 @@ -ACPI Custom DSDT read from initramfs - -2003 by Markus Gaugusch < dsdt at gaugusch dot at > -Special thanks go to Thomas Renninger from SuSE, who updated the patch for -2.6.0 and later modified it to read inside initramfs -2004 - 2008 maintained by Eric Piel < eric dot piel at tremplin-utc dot net > - -This option is intended for people who would like to hack their DSDT and don't -want to recompile their kernel after every change. It can also be useful to -distros which offers pre-compiled kernels and want to allow their users to use -a modified DSDT. In the Kernel config, enable the initial RAM filesystem -support (in General Setup) and enable ACPI_CUSTOM_DSDT_INITRD at the ACPI -options (General Setup|ACPI Support|Read Custom DSDT from initramfs). - -A custom DSDT (Differentiated System Description Table) is useful when your -computer uses ACPI but problems occur due to broken implementation. Typically, -your computer works but there are some troubles with the hardware detection or -the power management. You can check that troubles come from errors in the DSDT by -activating the ACPI debug option and reading the logs. This table is provided -by the BIOS, therefore it might be a good idea to check for BIOS update on your -vendor website before going any further. Errors are often caused by vendors -testing their hardware only with Windows or because there is code which is -executed only on a specific OS with a specific version and Linux hasn't been -considered during the development. - -Before you run away from customising your DSDT, you should note that already -corrected tables are available for a fair amount of computers on this web-page: -http://acpi.sf.net/dsdt . Be careful though, to work correctly a DSDT has to -match closely the hardware, including the amount of RAM, the frequency of the -processor and the PCI cards present! If you are part of the unluckies who -cannot find their hardware in this database, you can modify your DSDT by -yourself. This process is less painful than it sounds. Download the Intel ASL -compiler/decompiler at http://www.intel.com/technology/IAPC/acpi/downloads.htm . -As root, you then have to dump your DSDT and decompile it. By using the -compiler messages as well as the kernel ACPI debug messages and the reference -book (available at the Intel website and also at http://www.acpi.info), it is -quite easy to obtain a fully working table. - -Once your new DSDT is ready you'll have to add it to an initramfs so that the -kernel can read the table at the very beginning of the boot. As the file has to -be accessed very early during the boot process the initramfs has to be an -initramfs. The file is contained into the initramfs under the name /DSDT.aml . -To obtain such an initramfs, you might have to modify your initramfs script or -you can add it later to the initramfs with the script appended to this -document. The command will look like: -initramfs-add-dsdt initramfs.img my-dsdt.aml - -In case you don't use any initramfs, the possibilities you have are to either -start using one (try mkinitrd or yaird), or use the "Include Custom DSDT" -configure option to directly include your DSDT inside the kernel. - -The message "Looking for DSDT in initramfs..." will tell you if the DSDT was -found or not. If you need to update your DSDT, generate a new initramfs and -perform the steps above. Don't forget that with Lilo, you'll have to re-run it. - - -====================== Here starts initramfs-add-dsdt ========================== -#!/bin/bash -# Adds a DSDT file to the initrd (if it's an initramfs) -# first argument is the name of archive -# second argument is the name of the file to add -# The file will be copied as /DSDT.aml - -# 20060126: fix "Premature end of file" with some old cpio (Roland Robic) -# 20060205: this time it should really work - -# check the arguments -if [ $# -ne 2 ]; then - program_name=$(basename $0) - echo "\ -$program_name: too few arguments -Usage: $program_name initrd-name.img DSDT-to-add.aml -Adds a DSDT file to an initrd (in initramfs format) - - initrd-name.img: filename of the initrd in initramfs format - DSDT-to-add.aml: filename of the DSDT file to add - " 1>&2 - exit 1 -fi - -# we should check it's an initramfs - -tempcpio=$(mktemp -d) -# cleanup on exit, hangup, interrupt, quit, termination -trap 'rm -rf $tempcpio' 0 1 2 3 15 - -# extract the archive -gunzip -c "$1" > "$tempcpio"/initramfs.cpio || exit 1 - -# copy the DSDT file at the root of the directory so that we can call it "/DSDT.aml" -cp -f "$2" "$tempcpio"/DSDT.aml - -# add the file -cd "$tempcpio" -(echo DSDT.aml | cpio --quiet -H newc -o -A -O "$tempcpio"/initramfs.cpio) || exit 1 -cd "$OLDPWD" - -# re-compress the archive -gzip -c "$tempcpio"/initramfs.cpio > "$1" diff --git a/Documentation/acpi/dsdt-override.txt b/Documentation/acpi/dsdt-override.txt new file mode 100644 index 000000000000..5008f256a2db --- /dev/null +++ b/Documentation/acpi/dsdt-override.txt @@ -0,0 +1,15 @@ +Linux supports two methods of overriding the BIOS DSDT: + +CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel. + +CONFIG_ACPI_CUSTOM_DSDT_INITRD adds the image to the initrd. + +When to use these methods is described in detail on the +Linux/ACPI home page: +http://www.lesswatts.org/projects/acpi/overridingDSDT.php + +Note that if both options are used, the DSDT supplied +by the INITRD method takes precedence. + +Documentation/initramfs-add-dsdt.sh is provided for convenience +for use with the CONFIG_ACPI_CUSTOM_DSDT_INITRD method. diff --git a/Documentation/acpi/initramfs-add-dsdt.sh b/Documentation/acpi/initramfs-add-dsdt.sh new file mode 100755 index 000000000000..17ef6e838e14 --- /dev/null +++ b/Documentation/acpi/initramfs-add-dsdt.sh @@ -0,0 +1,43 @@ +#!/bin/bash +# Adds a DSDT file to the initrd (if it's an initramfs) +# first argument is the name of archive +# second argument is the name of the file to add +# The file will be copied as /DSDT.aml + +# 20060126: fix "Premature end of file" with some old cpio (Roland Robic) +# 20060205: this time it should really work + +# check the arguments +if [ $# -ne 2 ]; then + program_name=$(basename $0) + echo "\ +$program_name: too few arguments +Usage: $program_name initrd-name.img DSDT-to-add.aml +Adds a DSDT file to an initrd (in initramfs format) + + initrd-name.img: filename of the initrd in initramfs format + DSDT-to-add.aml: filename of the DSDT file to add + " 1>&2 + exit 1 +fi + +# we should check it's an initramfs + +tempcpio=$(mktemp -d) +# cleanup on exit, hangup, interrupt, quit, termination +trap 'rm -rf $tempcpio' 0 1 2 3 15 + +# extract the archive +gunzip -c "$1" > "$tempcpio"/initramfs.cpio || exit 1 + +# copy the DSDT file at the root of the directory so that we can call it "/DSDT.aml" +cp -f "$2" "$tempcpio"/DSDT.aml + +# add the file +cd "$tempcpio" +(echo DSDT.aml | cpio --quiet -H newc -o -A -O "$tempcpio"/initramfs.cpio) || exit 1 +cd "$OLDPWD" + +# re-compress the archive +gzip -c "$tempcpio"/initramfs.cpio > "$1" + diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 0442ae153a24..c8e832044580 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -263,8 +263,10 @@ config ACPI_CUSTOM_DSDT depends on !STANDALONE default n help - This option is to load a custom ACPI DSDT - If you don't know what that is, say N. + This option supports a custom DSDT by linking it into the kernel. + See Documentation/acpi/dsdt-override.txt + + If unsure, say N. config ACPI_CUSTOM_DSDT_FILE string "Custom DSDT Table file to include" @@ -279,17 +281,11 @@ config ACPI_CUSTOM_DSDT_INITRD depends on BLK_DEV_INITRD default n help - The DSDT (Differentiated System Description Table) often needs to be - overridden because of broken BIOS implementations. If this feature is - activated you will be able to provide a customized DSDT by adding it - to your initramfs. If your mkinitrd tool does not support this feature - a script is provided in the documentation. For more details see - or . - If there is no table found, it will fall-back to the custom DSDT - in-kernel (if activated) or to the DSDT from the BIOS. + This option supports a custom DSDT by optionally loading it from initrd. + See Documentation/acpi/dsdt-override.txt - Even if you do not need a new one at the moment, you may want to use a - better DSDT later. It is safe to say Y here. + If you are not using this feature now, but may use it later, + it is safe to say Y here. config ACPI_BLACKLIST_YEAR int "Disable ACPI for systems before Jan 1st this year" if X86_32 From 04d94886b47b5133915021dcfb1108a8576f6ea7 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Feb 2008 19:49:54 -0500 Subject: [PATCH 110/112] ACPI: update intrd DSDT override console messages also, address some checkpatch.pl violations Signed-off-by: Len Brown --- drivers/acpi/osl.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 2b41bdddbeb6..2a400e08e74c 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -326,49 +326,50 @@ struct acpi_table_header *acpi_find_dsdt_initrd(void) struct kstat stat; char *ramfs_dsdt_name = "/DSDT.aml"; - printk(KERN_INFO PREFIX "Looking for DSDT in initramfs... "); + printk(KERN_INFO PREFIX "Checking initramfs for custom DSDT"); /* * Never do this at home, only the user-space is allowed to open a file. - * The clean way would be to use the firmware loader. But this code must be run - * before there is any userspace available. So we need a static/init firmware - * infrastructure, which doesn't exist yet... + * The clean way would be to use the firmware loader. + * But this code must be run before there is any userspace available. + * A static/init firmware infrastructure doesn't exist yet... */ - if (vfs_stat(ramfs_dsdt_name, &stat) < 0) { - printk("not found.\n"); + if (vfs_stat(ramfs_dsdt_name, &stat) < 0) return ret; - } len = stat.size; /* check especially against empty files */ if (len <= 4) { - printk("error, file is too small: only %lu bytes.\n", len); + printk(KERN_ERR PREFIX "Failed: DSDT only %lu bytes.\n", len); return ret; } firmware_file = filp_open(ramfs_dsdt_name, O_RDONLY, 0); if (IS_ERR(firmware_file)) { - printk("error, could not open file %s.\n", ramfs_dsdt_name); + printk(KERN_ERR PREFIX "Failed to open %s.\n", ramfs_dsdt_name); return ret; } - dsdt_buffer = ACPI_ALLOCATE(len); + dsdt_buffer = kmalloc(len, GFP_ATOMIC); if (!dsdt_buffer) { - printk("error when allocating %lu bytes of memory.\n", len); + printk(KERN_ERR PREFIX "Failed to allocate %lu bytes.\n", len); goto err; } oldfs = get_fs(); set_fs(KERNEL_DS); - len2 = vfs_read(firmware_file, (char __user *)dsdt_buffer, len, &firmware_file->f_pos); + len2 = vfs_read(firmware_file, (char __user *)dsdt_buffer, len, + &firmware_file->f_pos); set_fs(oldfs); if (len2 < len) { - printk("error trying to read %lu bytes from %s.\n", len, ramfs_dsdt_name); + printk(KERN_ERR PREFIX "Failed to read %lu bytes from %s.\n", + len, ramfs_dsdt_name); ACPI_FREE(dsdt_buffer); goto err; } - printk("successfully read %lu bytes from %s.\n", len, ramfs_dsdt_name); + printk(KERN_INFO PREFIX "Found %lu byte DSDT in %s.\n", + len, ramfs_dsdt_name); ret = dsdt_buffer; err: filp_close(firmware_file, NULL); @@ -392,7 +393,9 @@ acpi_os_table_override(struct acpi_table_header * existing_table, #ifdef CONFIG_ACPI_CUSTOM_DSDT_INITRD if ((strncmp(existing_table->signature, "DSDT", 4) == 0) && !acpi_no_initrd_override) { - struct acpi_table_header *initrd_table = acpi_find_dsdt_initrd(); + struct acpi_table_header *initrd_table; + + initrd_table = acpi_find_dsdt_initrd(); if (initrd_table) *new_table = initrd_table; } From 9b7131542178f5f948e4bb6bea6e1c545e697b06 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 Feb 2008 04:16:34 -0500 Subject: [PATCH 111/112] Revert "cpuidle: build fix for non-x86" This reverts commit f757397097d0713c949af76dccabb65a2785782e. which ironically broke the ia64 build --- arch/x86/Kconfig | 3 --- drivers/cpuidle/cpuidle.c | 2 +- include/linux/cpuidle.h | 13 ------------- 3 files changed, 1 insertion(+), 17 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3954ae96b0c7..fd4265007053 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -98,9 +98,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n -config ARCH_HAS_CPU_IDLE_WAIT - def_bool y - config GENERIC_CALIBRATE_DELAY def_bool y diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index d868d737742f..2c4b2d47973e 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -83,7 +83,7 @@ void cpuidle_uninstall_idle_handler(void) { if (enabled_devices && (pm_idle != pm_idle_old)) { pm_idle = pm_idle_old; - cpuidle_kick_cpus(); + cpu_idle_wait(); } } diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index c8eb8c71809e..385d45b616db 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -73,19 +73,6 @@ cpuidle_set_statedata(struct cpuidle_state *state, void *data) state->driver_data = data; } -#ifdef CONFIG_SMP -#ifdef CONFIG_ARCH_HAS_CPU_IDLE_WAIT -static inline void cpuidle_kick_cpus(void) -{ - cpu_idle_wait(); -} -#else /* !CONFIG_ARCH_HAS_CPU_IDLE_WAIT */ -#error "Arch needs cpu_idle_wait() equivalent here" -#endif /* !CONFIG_ARCH_HAS_CPU_IDLE_WAIT */ -#else /* !CONFIG_SMP */ -static inline void cpuidle_kick_cpus(void) {} -#endif /* !CONFIG_SMP */ - struct cpuidle_state_kobj { struct cpuidle_state *state; struct completion kobj_unregister; From b7143156c9ceee1a072c57aac8729d2dec5b3bf1 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 Feb 2008 04:24:01 -0500 Subject: [PATCH 112/112] ACPI: fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/acpi/system.c:360: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result Signed-off-by: Len Brown --- drivers/acpi/system.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index ce881713f7a6..55cf4c05bb74 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -357,8 +357,8 @@ void acpi_irq_stats_init(void) } interrupt_stats_attr_group.attrs = all_attrs; - sysfs_create_group(acpi_kobj, &interrupt_stats_attr_group); - return; + if (!sysfs_create_group(acpi_kobj, &interrupt_stats_attr_group)) + return; fail: delete_gpe_attr_array();