arm/imx: remove mx31_setup_weimcs() from mx31.h

The helper function mx31_setup_weimcs() references IOMEM() and
IMX_IO_P2V() but without required header mach/hardware.h included
in mx31.h.  This will break the build of those mx31 based board file
with no direct inclusion of mach/hardware.h, or when indirect inclusion
to mach/hardware.h breaks.

For example, when the inclusion of mach/hardware.h gets removed from
mach/gpio.h, we will see the following compile error.

  CC      arch/arm/mach-imx/mach-pcm037_eet.o
In file included from arch/arm/mach-imx/devices-imx31.h:9:0,
                 from arch/arm/mach-imx/mach-pcm037_eet.c:20:
arch/arm/plat-mxc/include/mach/mx31.h: In function ‘mx31_setup_weimcs’:
arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IOMEM’
arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IMX_IO_P2V’

This patch removes mx31_setup_weimcs() from mx31.h and makes it local
to mach-qong.c, which is the only user for this helper.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Shawn Guo 2011-10-17 14:15:06 +08:00 коммит произвёл Sascha Hauer
Родитель 976d167615
Коммит f16fcb6348
2 изменённых файлов: 4 добавлений и 15 удалений

Просмотреть файл

@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = {
static void __init qong_init_nand_mtd(void)
{
/* init CS */
mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */

Просмотреть файл

@ -1,10 +1,6 @@
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
#ifndef __ASSEMBLER__
#include <linux/io.h>
#endif
/*
* IRAM
*/
@ -122,16 +118,6 @@
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
#ifndef __ASSEMBLER__
static inline void mx31_setup_weimcs(size_t cs,
unsigned upper, unsigned lower, unsigned addional)
{
__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
}
#endif
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5