arm/imx: remove mx31_setup_weimcs() from mx31.h
The helper function mx31_setup_weimcs() references IOMEM() and IMX_IO_P2V() but without required header mach/hardware.h included in mx31.h. This will break the build of those mx31 based board file with no direct inclusion of mach/hardware.h, or when indirect inclusion to mach/hardware.h breaks. For example, when the inclusion of mach/hardware.h gets removed from mach/gpio.h, we will see the following compile error. CC arch/arm/mach-imx/mach-pcm037_eet.o In file included from arch/arm/mach-imx/devices-imx31.h:9:0, from arch/arm/mach-imx/mach-pcm037_eet.c:20: arch/arm/plat-mxc/include/mach/mx31.h: In function ‘mx31_setup_weimcs’: arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IOMEM’ arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IMX_IO_P2V’ This patch removes mx31_setup_weimcs() from mx31.h and makes it local to mach-qong.c, which is the only user for this helper. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Родитель
976d167615
Коммит
f16fcb6348
|
@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = {
|
|||
static void __init qong_init_nand_mtd(void)
|
||||
{
|
||||
/* init CS */
|
||||
mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
|
||||
__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
|
||||
__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
|
||||
__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
|
||||
|
||||
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
|
||||
|
||||
/* enable pin */
|
||||
|
|
|
@ -1,10 +1,6 @@
|
|||
#ifndef __MACH_MX31_H__
|
||||
#define __MACH_MX31_H__
|
||||
|
||||
#ifndef __ASSEMBLER__
|
||||
#include <linux/io.h>
|
||||
#endif
|
||||
|
||||
/*
|
||||
* IRAM
|
||||
*/
|
||||
|
@ -122,16 +118,6 @@
|
|||
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
|
||||
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
|
||||
|
||||
#ifndef __ASSEMBLER__
|
||||
static inline void mx31_setup_weimcs(size_t cs,
|
||||
unsigned upper, unsigned lower, unsigned addional)
|
||||
{
|
||||
__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
|
||||
__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
|
||||
__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
|
||||
}
|
||||
#endif
|
||||
|
||||
#define MX31_INT_I2C3 3
|
||||
#define MX31_INT_I2C2 4
|
||||
#define MX31_INT_MPEG4_ENCODER 5
|
||||
|
|
Загрузка…
Ссылка в новой задаче