regulator: add a regulator driver for the AS3711 PMIC
This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Guennadi Liakhovetski
Mark Brown
Родитель
f4a75d2eb7
Коммит
f1e64f9026
|
|
@ -450,5 +450,12 @@ config REGULATOR_WM8994
|
|||
This driver provides support for the voltage regulators on the
|
||||
WM8994 CODEC.
|
||||
|
||||
config REGULATOR_AS3711
|
||||
tristate "AS3711 PMIC"
|
||||
depends on MFD_AS3711
|
||||
help
|
||||
This driver provides support for the voltage regulators on the
|
||||
AS3711 PMIC
|
||||
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
|
|||
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
|
||||
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
|
||||
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
|
||||
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,379 @@
|
|||
/*
|
||||
* AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies
|
||||
*
|
||||
* Copyright (C) 2012 Renesas Electronics Corporation
|
||||
* Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the version 2 of the GNU General Public License as
|
||||
* published by the Free Software Foundation
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mfd/as3711.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
struct as3711_regulator_info {
|
||||
struct regulator_desc desc;
|
||||
unsigned int max_uV;
|
||||
};
|
||||
|
||||
struct as3711_regulator {
|
||||
struct as3711_regulator_info *reg_info;
|
||||
struct regulator_dev *rdev;
|
||||
};
|
||||
|
||||
static int as3711_list_voltage_sd(struct regulator_dev *rdev,
|
||||
unsigned int selector)
|
||||
{
|
||||
if (selector >= rdev->desc->n_voltages)
|
||||
return -EINVAL;
|
||||
|
||||
if (!selector)
|
||||
return 0;
|
||||
if (selector < 0x41)
|
||||
return 600000 + selector * 12500;
|
||||
if (selector < 0x71)
|
||||
return 1400000 + (selector - 0x40) * 25000;
|
||||
return 2600000 + (selector - 0x70) * 50000;
|
||||
}
|
||||
|
||||
static int as3711_list_voltage_aldo(struct regulator_dev *rdev,
|
||||
unsigned int selector)
|
||||
{
|
||||
if (selector >= rdev->desc->n_voltages)
|
||||
return -EINVAL;
|
||||
|
||||
if (selector < 0x10)
|
||||
return 1200000 + selector * 50000;
|
||||
return 1800000 + (selector - 0x10) * 100000;
|
||||
}
|
||||
|
||||
static int as3711_list_voltage_dldo(struct regulator_dev *rdev,
|
||||
unsigned int selector)
|
||||
{
|
||||
if (selector >= rdev->desc->n_voltages ||
|
||||
(selector > 0x10 && selector < 0x20))
|
||||
return -EINVAL;
|
||||
|
||||
if (selector < 0x11)
|
||||
return 900000 + selector * 50000;
|
||||
return 1750000 + (selector - 0x20) * 50000;
|
||||
}
|
||||
|
||||
static int as3711_bound_check(struct regulator_dev *rdev,
|
||||
int *min_uV, int *max_uV)
|
||||
{
|
||||
struct as3711_regulator_info *info = container_of(rdev->desc,
|
||||
struct as3711_regulator_info, desc);
|
||||
struct as3711_regulator *reg = rdev->reg_data;
|
||||
|
||||
WARN_ON(reg->reg_info != info);
|
||||
|
||||
dev_dbg(&rdev->dev, "%s(), %d, %d, %d\n", __func__,
|
||||
*min_uV, rdev->desc->min_uV, info->max_uV);
|
||||
|
||||
if (*max_uV < *min_uV ||
|
||||
*min_uV >= info->max_uV || rdev->desc->min_uV >= *max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
if (rdev->desc->n_voltages == 1)
|
||||
return 0;
|
||||
|
||||
if (*max_uV > info->max_uV)
|
||||
*max_uV = info->max_uV;
|
||||
|
||||
if (*min_uV < rdev->desc->min_uV)
|
||||
*min_uV = rdev->desc->min_uV;
|
||||
|
||||
return *min_uV;
|
||||
}
|
||||
|
||||
static int as3711_sel_check(int min, int max, int bottom, int step)
|
||||
{
|
||||
int ret, voltage;
|
||||
|
||||
/* Round up min, when dividing: keeps us within the range */
|
||||
ret = (min - bottom + step - 1) / step;
|
||||
voltage = ret * step + bottom;
|
||||
pr_debug("%s(): select %d..%d in %d+N*%d: %d\n", __func__,
|
||||
min, max, bottom, step, ret);
|
||||
if (voltage > max) {
|
||||
/*
|
||||
* Try 1 down. It will take us below min, but as long we stay
|
||||
* above bottom, we're fine.
|
||||
*/
|
||||
ret--;
|
||||
voltage = ret * step + bottom;
|
||||
if (voltage < bottom)
|
||||
return -EINVAL;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int as3711_map_voltage_sd(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = as3711_bound_check(rdev, &min_uV, &max_uV);
|
||||
if (ret <= 0)
|
||||
return ret;
|
||||
|
||||
if (min_uV <= 1400000)
|
||||
return as3711_sel_check(min_uV, max_uV, 600000, 12500);
|
||||
|
||||
if (min_uV <= 2600000)
|
||||
return as3711_sel_check(min_uV, max_uV, 1400000, 25000) + 0x40;
|
||||
|
||||
return as3711_sel_check(min_uV, max_uV, 2600000, 50000) + 0x70;
|
||||
}
|
||||
|
||||
/*
|
||||
* The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and
|
||||
* STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes:
|
||||
* FAST: sdX_fast=1
|
||||
* NORMAL: low_noise=1
|
||||
* IDLE: low_noise=0
|
||||
*/
|
||||
|
||||
static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
unsigned int fast_bit = rdev->desc->enable_mask,
|
||||
low_noise_bit = fast_bit << 4;
|
||||
u8 val;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
val = fast_bit | low_noise_bit;
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = low_noise_bit;
|
||||
break;
|
||||
case REGULATOR_MODE_IDLE:
|
||||
val = 0;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1,
|
||||
low_noise_bit | fast_bit, val);
|
||||
}
|
||||
|
||||
static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev)
|
||||
{
|
||||
unsigned int fast_bit = rdev->desc->enable_mask,
|
||||
low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit;
|
||||
unsigned int val;
|
||||
int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if ((val & mask) == mask)
|
||||
return REGULATOR_MODE_FAST;
|
||||
|
||||
if ((val & mask) == low_noise_bit)
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
|
||||
if (!(val & mask))
|
||||
return REGULATOR_MODE_IDLE;
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int as3711_map_voltage_aldo(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = as3711_bound_check(rdev, &min_uV, &max_uV);
|
||||
if (ret <= 0)
|
||||
return ret;
|
||||
|
||||
if (min_uV <= 1800000)
|
||||
return as3711_sel_check(min_uV, max_uV, 1200000, 50000);
|
||||
|
||||
return as3711_sel_check(min_uV, max_uV, 1800000, 100000) + 0x10;
|
||||
}
|
||||
|
||||
static int as3711_map_voltage_dldo(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = as3711_bound_check(rdev, &min_uV, &max_uV);
|
||||
if (ret <= 0)
|
||||
return ret;
|
||||
|
||||
if (min_uV <= 1700000)
|
||||
return as3711_sel_check(min_uV, max_uV, 900000, 50000);
|
||||
|
||||
return as3711_sel_check(min_uV, max_uV, 1750000, 50000) + 0x20;
|
||||
}
|
||||
|
||||
static struct regulator_ops as3711_sd_ops = {
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.list_voltage = as3711_list_voltage_sd,
|
||||
.map_voltage = as3711_map_voltage_sd,
|
||||
.get_mode = as3711_get_mode_sd,
|
||||
.set_mode = as3711_set_mode_sd,
|
||||
};
|
||||
|
||||
static struct regulator_ops as3711_aldo_ops = {
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.list_voltage = as3711_list_voltage_aldo,
|
||||
.map_voltage = as3711_map_voltage_aldo,
|
||||
};
|
||||
|
||||
static struct regulator_ops as3711_dldo_ops = {
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.list_voltage = as3711_list_voltage_dldo,
|
||||
.map_voltage = as3711_map_voltage_dldo,
|
||||
};
|
||||
|
||||
#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx) \
|
||||
[AS3711_REGULATOR_ ## _id] = { \
|
||||
.desc = { \
|
||||
.name = "as3711-regulator-" # _id, \
|
||||
.id = AS3711_REGULATOR_ ## _id, \
|
||||
.n_voltages = (_vmask + 1), \
|
||||
.ops = &as3711_ ## _sfx ## _ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.vsel_reg = AS3711_ ## _id ## _VOLTAGE, \
|
||||
.vsel_mask = _vmask << _vshift, \
|
||||
.enable_reg = AS3711_ ## _en_reg, \
|
||||
.enable_mask = BIT(_en_bit), \
|
||||
.min_uV = _min_uV, \
|
||||
}, \
|
||||
.max_uV = _max_uV, \
|
||||
}
|
||||
|
||||
static struct as3711_regulator_info as3711_reg_info[] = {
|
||||
AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd),
|
||||
AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd),
|
||||
AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd),
|
||||
AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd),
|
||||
AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
|
||||
AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
|
||||
AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
|
||||
AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
|
||||
AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
|
||||
AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
|
||||
AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
|
||||
AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
|
||||
/* StepUp output voltage depends on supplying regulator */
|
||||
};
|
||||
|
||||
#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
|
||||
|
||||
static int as3711_regulator_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev);
|
||||
struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent);
|
||||
struct regulator_init_data *reg_data;
|
||||
struct regulator_config config = {.dev = &pdev->dev,};
|
||||
struct as3711_regulator *reg = NULL;
|
||||
struct as3711_regulator *regs;
|
||||
struct regulator_dev *rdev;
|
||||
struct as3711_regulator_info *ri;
|
||||
int ret;
|
||||
int id;
|
||||
|
||||
if (!pdata)
|
||||
dev_dbg(&pdev->dev, "No platform data...\n");
|
||||
|
||||
regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM *
|
||||
sizeof(struct as3711_regulator), GFP_KERNEL);
|
||||
if (!regs) {
|
||||
dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) {
|
||||
reg_data = pdata ? pdata->init_data[id] : NULL;
|
||||
|
||||
/* No need to register if there is no regulator data */
|
||||
if (!ri->desc.name)
|
||||
continue;
|
||||
|
||||
reg = ®s[id];
|
||||
reg->reg_info = ri;
|
||||
|
||||
config.init_data = reg_data;
|
||||
config.driver_data = reg;
|
||||
config.regmap = as3711->regmap;
|
||||
|
||||
rdev = regulator_register(&ri->desc, &config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(&pdev->dev, "Failed to register regulator %s\n",
|
||||
ri->desc.name);
|
||||
ret = PTR_ERR(rdev);
|
||||
goto eregreg;
|
||||
}
|
||||
reg->rdev = rdev;
|
||||
}
|
||||
platform_set_drvdata(pdev, regs);
|
||||
return 0;
|
||||
|
||||
eregreg:
|
||||
while (--id >= 0)
|
||||
regulator_unregister(regs[id].rdev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int as3711_regulator_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct as3711_regulator *regs = platform_get_drvdata(pdev);
|
||||
int id;
|
||||
|
||||
for (id = 0; id < AS3711_REGULATOR_NUM; ++id)
|
||||
regulator_unregister(regs[id].rdev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver as3711_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "as3711-regulator",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = as3711_regulator_probe,
|
||||
.remove = as3711_regulator_remove,
|
||||
};
|
||||
|
||||
static int __init as3711_regulator_init(void)
|
||||
{
|
||||
return platform_driver_register(&as3711_regulator_driver);
|
||||
}
|
||||
subsys_initcall(as3711_regulator_init);
|
||||
|
||||
static void __exit as3711_regulator_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&as3711_regulator_driver);
|
||||
}
|
||||
module_exit(as3711_regulator_exit);
|
||||
|
||||
MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
|
||||
MODULE_DESCRIPTION("AS3711 regulator driver");
|
||||
MODULE_ALIAS("platform:as3711-regulator");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Загрузка…
Ссылка в новой задаче