microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'next' into for-linus 

Prepare input updates for 3.19.
This commit is contained in:
Dmitry Torokhov 2014-12-15 20:32:42 -08:00
Родитель a1f9a40726 1d6a01365f
Коммит f20c86cd75
77 изменённых файлов: 4950 добавлений и 923 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

26
Documentation/devicetree/bindings/input/cap1106.txt → Documentation/devicetree/bindings/input/cap11xx.txt
Просмотреть файл

@ -1,14 +1,16 @@
Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
Device tree bindings for Microchip CAP11xx based capacitive touch sensors
The node for this driver must be a child of a I2C controller node, as the
The node for this device must be a child of a I2C controller node, as the
device communication via I2C only.
Required properties:
compatible: Must be "microchip,cap1106"
compatible: Must contain one of:
"microchip,cap1106"
"microchip,cap1126"
"microchip,cap1188"
reg: The I2C slave address of the device.
Only 0x28 is valid.
interrupts: Property describing the interrupt line the
device's ALERT#/CM_IRQ# pin is connected to.
@ -26,6 +28,10 @@ Optional properties:
Valid values are 1, 2, 4, and 8.
By default, a gain of 1 is set.
microchip,irq-active-high: By default the interrupt pin is active low
open drain. This property allows using the active
high push-pull output.
linux,keycodes: Specifies an array of numeric keycode values to
be used for the channels. If this property is
omitted, KEY_A, KEY_B, etc are used as
@ -43,11 +49,11 @@ i2c_controller {
autorepeat;
microchip,sensor-gain = <2>;
linux,keycodes = <103 /* KEY_UP */
106 /* KEY_RIGHT */
108 /* KEY_DOWN */
105 /* KEY_LEFT */
109 /* KEY_PAGEDOWN */
104>; /* KEY_PAGEUP */
linux,keycodes = <103>, /* KEY_UP */
<106>, /* KEY_RIGHT */
<108>, /* KEY_DOWN */
<105>, /* KEY_LEFT */
<109>, /* KEY_PAGEDOWN */
<104>; /* KEY_PAGEUP */
};
}

34
Documentation/devicetree/bindings/input/elan_i2c.txt Normal file
Просмотреть файл

@ -0,0 +1,34 @@
Elantech I2C Touchpad
Required properties:
- compatible: must be "elan,ekth3000".
- reg: I2C address of the chip.
- interrupt-parent: a phandle for the interrupt controller (see interrupt
binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
Optional properties:
- wakeup-source: touchpad can be used as a wakeup source.
- pinctrl-names: should be "default" (see pinctrl binding [1]).
- pinctrl-0: a phandle pointing to the pin settings for the device (see
pinctrl binding [1]).
- vcc-supply: a phandle for the regulator supplying 3.3V power.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
&i2c1 {
/* ... */
touchpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
interrupt-parent = <&gpio4>;
interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
/* ... */
};

33
Documentation/devicetree/bindings/input/elants_i2c.txt Normal file
Просмотреть файл

@ -0,0 +1,33 @@
Elantech I2C Touchscreen
Required properties:
- compatible: must be "elan,ekth3500".
- reg: I2C address of the chip.
- interrupt-parent: a phandle for the interrupt controller (see interrupt
binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
Optional properties:
- wakeup-source: touchscreen can be used as a wakeup source.
- pinctrl-names: should be "default" (see pinctrl binding [1]).
- pinctrl-0: a phandle pointing to the pin settings for the device (see
pinctrl binding [1]).
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
&i2c1 {
/* ... */
touchscreen@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
interrupt-parent = <&gpio4>;
interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
/* ... */
};

10
Documentation/devicetree/bindings/input/gpio-keys.txt
Просмотреть файл

@ -10,10 +10,13 @@ Optional properties:
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
- gpios: OF device-tree gpio specification.
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
Required mutual exclusive subnode-properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
If not specified defaults to <1> == EV_KEY.
@ -33,4 +36,9 @@ Example nodes:
linux,code = <103>;
gpios = <&gpio1 0 1>;
};
button@22 {
label = "GPIO Key DOWN";
linux,code = <108>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
};
...

1
Documentation/devicetree/bindings/vendor-prefixes.txt
Просмотреть файл

@ -42,6 +42,7 @@ dlink D-Link Corporation
dmo Data Modul AG
ebv EBV Elektronik
edt Emerging Display Technologies
elan Elan Microelectronic Corp.
emmicro EM Microelectronic
epcos EPCOS AG
epfl Ecole Polytechnique Fédérale de Lausanne

6
MAINTAINERS
Просмотреть файл

@ -4062,6 +4062,12 @@ L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/usb/go7007/
GOODIX TOUCHSCREEN
M: Bastien Nocera <hadess@hadess.net>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/touchscreen/goodix.c
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
M: Alexandre Courbot <gnurou@gmail.com>

4
drivers/input/gameport/gameport.c
Просмотреть файл

@ -527,14 +527,14 @@ EXPORT_SYMBOL(gameport_set_phys);
*/
static void gameport_init_port(struct gameport *gameport)
{
static atomic_t gameport_no = ATOMIC_INIT(0);
static atomic_t gameport_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
mutex_init(&gameport->drv_mutex);
device_initialize(&gameport->dev);
dev_set_name(&gameport->dev, "gameport%lu",
(unsigned long)atomic_inc_return(&gameport_no) - 1);
(unsigned long)atomic_inc_return(&gameport_no));
gameport->dev.bus = &gameport_bus;
gameport->dev.release = gameport_release_port;
if (gameport->parent)

4
drivers/input/input.c
Просмотреть файл

@ -1775,7 +1775,7 @@ EXPORT_SYMBOL_GPL(input_class);
*/
struct input_dev *input_allocate_device(void)
{
static atomic_t input_no = ATOMIC_INIT(0);
static atomic_t input_no = ATOMIC_INIT(-1);
struct input_dev *dev;
dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
@ -1790,7 +1790,7 @@ struct input_dev *input_allocate_device(void)
INIT_LIST_HEAD(&dev->node);
dev_set_name(&dev->dev, "input%lu",
(unsigned long) atomic_inc_return(&input_no) - 1);
(unsigned long)atomic_inc_return(&input_no));
__module_get(THIS_MODULE);
}

8
drivers/input/joystick/xpad.c
Просмотреть файл

@ -886,8 +886,8 @@ static void xpad_led_set(struct led_classdev *led_cdev,
static int xpad_led_probe(struct usb_xpad *xpad)
{
static atomic_t led_seq = ATOMIC_INIT(0);
long led_no;
static atomic_t led_seq = ATOMIC_INIT(-1);
unsigned long led_no;
struct xpad_led *led;
struct led_classdev *led_cdev;
int error;
@ -899,9 +899,9 @@ static int xpad_led_probe(struct usb_xpad *xpad)
if (!led)
return -ENOMEM;
led_no = (long)atomic_inc_return(&led_seq) - 1;
led_no = atomic_inc_return(&led_seq);
snprintf(led->name, sizeof(led->name), "xpad%ld", led_no);
snprintf(led->name, sizeof(led->name), "xpad%lu", led_no);
led->xpad = xpad;
led_cdev = &led->led_cdev;

8
drivers/input/keyboard/Kconfig
Просмотреть файл

@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC
To compile this driver as a module, choose M here: the
module will be called cros_ec_keyb.
config KEYBOARD_CAP1106
tristate "Microchip CAP1106 touch sensor"
config KEYBOARD_CAP11XX
tristate "Microchip CAP11XX based touch sensors"
depends on OF && I2C
select REGMAP_I2C
help
Say Y here to enable the CAP1106 touch sensor driver.
Say Y here to enable the CAP11XX touch sensor driver.
To compile this driver as a module, choose M here: the
module will be called cap1106.
module will be called cap11xx.
endif

2
drivers/input/keyboard/Makefile
Просмотреть файл

@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CAP1106) += cap1106.o
obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o
obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o
obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o

47
drivers/input/keyboard/amikbd.c
Просмотреть файл

@ -45,6 +45,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Amiga keyboard driver");
MODULE_LICENSE("GPL");
#ifdef CONFIG_HW_CONSOLE
static unsigned char amikbd_keycode[0x78] __initdata = {
[0] = KEY_GRAVE,
[1] = KEY_1,
@ -144,6 +145,32 @@ static unsigned char amikbd_keycode[0x78] __initdata = {
[103] = KEY_RIGHTMETA
};
static void __init amikbd_init_console_keymaps(void)
{
/* We can spare 512 bytes on stack for temp_map in init path. */
unsigned short temp_map[NR_KEYS];
int i, j;
for (i = 0; i < MAX_NR_KEYMAPS; i++) {
if (!key_maps[i])
continue;
memset(temp_map, 0, sizeof(temp_map));
for (j = 0; j < 0x78; j++) {
if (!amikbd_keycode[j])
continue;
temp_map[j] = key_maps[i][amikbd_keycode[j]];
}
for (j = 0; j < NR_KEYS; j++) {
if (!temp_map[j])
temp_map[j] = 0xf200;
}
memcpy(key_maps[i], temp_map, sizeof(temp_map));
}
}
#else /* !CONFIG_HW_CONSOLE */
static inline void amikbd_init_console_keymaps(void) {}
#endif /* !CONFIG_HW_CONSOLE */
static const char *amikbd_messages[8] = {
[0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
[1] = KERN_WARNING "amikbd: keyboard lost sync\n",
@ -186,7 +213,7 @@ static irqreturn_t amikbd_interrupt(int irq, void *data)
static int __init amikbd_probe(struct platform_device *pdev)
{
struct input_dev *dev;
int i, j, err;
int i, err;
dev = input_allocate_device();
if (!dev) {
@ -207,22 +234,8 @@ static int __init amikbd_probe(struct platform_device *pdev)
for (i = 0; i < 0x78; i++)
set_bit(i, dev->keybit);
for (i = 0; i < MAX_NR_KEYMAPS; i++) {
static u_short temp_map[NR_KEYS] __initdata;
if (!key_maps[i])
continue;
memset(temp_map, 0, sizeof(temp_map));
for (j = 0; j < 0x78; j++) {
if (!amikbd_keycode[j])
continue;
temp_map[j] = key_maps[i][amikbd_keycode[j]];
}
for (j = 0; j < NR_KEYS; j++) {
if (!temp_map[j])
temp_map[j] = 0xf200;
}
memcpy(key_maps[i], temp_map, sizeof(temp_map));
}
amikbd_init_console_keymaps();
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
dev);

6
drivers/input/keyboard/atkbd.c
Просмотреть файл

@ -456,8 +456,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
keycode = atkbd->keycode[code];
if (keycode != ATKBD_KEY_NULL)
input_event(dev, EV_MSC, MSC_SCAN, code);
if (!(atkbd->release && test_bit(code, atkbd->force_release_mask)))
if (keycode != ATKBD_KEY_NULL)
input_event(dev, EV_MSC, MSC_SCAN, code);
switch (keycode) {
case ATKBD_KEY_NULL:
@ -511,6 +512,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
input_sync(dev);
if (value && test_bit(code, atkbd->force_release_mask)) {
input_event(dev, EV_MSC, MSC_SCAN, code);
input_report_key(dev, keycode, 0);
input_sync(dev);
}

341
drivers/input/keyboard/cap1106.c
Просмотреть файл

@ -1,341 +0,0 @@
/*
* Input driver for Microchip CAP1106, 6 channel capacitive touch sensor
*
* http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106
*
* (c) 2014 Daniel Mack <linux@zonque.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/i2c.h>
#include <linux/gpio/consumer.h>
#define CAP1106_REG_MAIN_CONTROL 0x00
#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT (6)
#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK (0xc0)
#define CAP1106_REG_MAIN_CONTROL_DLSEEP BIT(4)
#define CAP1106_REG_GENERAL_STATUS 0x02
#define CAP1106_REG_SENSOR_INPUT 0x03
#define CAP1106_REG_NOISE_FLAG_STATUS 0x0a
#define CAP1106_REG_SENOR_DELTA(X) (0x10 + (X))
#define CAP1106_REG_SENSITIVITY_CONTROL 0x1f
#define CAP1106_REG_CONFIG 0x20
#define CAP1106_REG_SENSOR_ENABLE 0x21
#define CAP1106_REG_SENSOR_CONFIG 0x22
#define CAP1106_REG_SENSOR_CONFIG2 0x23
#define CAP1106_REG_SAMPLING_CONFIG 0x24
#define CAP1106_REG_CALIBRATION 0x26
#define CAP1106_REG_INT_ENABLE 0x27
#define CAP1106_REG_REPEAT_RATE 0x28
#define CAP1106_REG_MT_CONFIG 0x2a
#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b
#define CAP1106_REG_MT_PATTERN 0x2d
#define CAP1106_REG_RECALIB_CONFIG 0x2f
#define CAP1106_REG_SENSOR_THRESH(X) (0x30 + (X))
#define CAP1106_REG_SENSOR_NOISE_THRESH 0x38
#define CAP1106_REG_STANDBY_CHANNEL 0x40
#define CAP1106_REG_STANDBY_CONFIG 0x41
#define CAP1106_REG_STANDBY_SENSITIVITY 0x42
#define CAP1106_REG_STANDBY_THRESH 0x43
#define CAP1106_REG_CONFIG2 0x44
#define CAP1106_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
#define CAP1106_REG_SENSOR_CALIB (0xb1 + (X))
#define CAP1106_REG_SENSOR_CALIB_LSB1 0xb9
#define CAP1106_REG_SENSOR_CALIB_LSB2 0xba
#define CAP1106_REG_PRODUCT_ID 0xfd
#define CAP1106_REG_MANUFACTURER_ID 0xfe
#define CAP1106_REG_REVISION 0xff
#define CAP1106_NUM_CHN 6
#define CAP1106_PRODUCT_ID 0x55
#define CAP1106_MANUFACTURER_ID 0x5d
struct cap1106_priv {
struct regmap *regmap;
struct input_dev *idev;
/* config */
unsigned short keycodes[CAP1106_NUM_CHN];
};
static const struct reg_default cap1106_reg_defaults[] = {
{ CAP1106_REG_MAIN_CONTROL, 0x00 },
{ CAP1106_REG_GENERAL_STATUS, 0x00 },
{ CAP1106_REG_SENSOR_INPUT, 0x00 },
{ CAP1106_REG_NOISE_FLAG_STATUS, 0x00 },
{ CAP1106_REG_SENSITIVITY_CONTROL, 0x2f },
{ CAP1106_REG_CONFIG, 0x20 },
{ CAP1106_REG_SENSOR_ENABLE, 0x3f },
{ CAP1106_REG_SENSOR_CONFIG, 0xa4 },
{ CAP1106_REG_SENSOR_CONFIG2, 0x07 },
{ CAP1106_REG_SAMPLING_CONFIG, 0x39 },
{ CAP1106_REG_CALIBRATION, 0x00 },
{ CAP1106_REG_INT_ENABLE, 0x3f },
{ CAP1106_REG_REPEAT_RATE, 0x3f },
{ CAP1106_REG_MT_CONFIG, 0x80 },
{ CAP1106_REG_MT_PATTERN_CONFIG, 0x00 },
{ CAP1106_REG_MT_PATTERN, 0x3f },
{ CAP1106_REG_RECALIB_CONFIG, 0x8a },
{ CAP1106_REG_SENSOR_THRESH(0), 0x40 },
{ CAP1106_REG_SENSOR_THRESH(1), 0x40 },
{ CAP1106_REG_SENSOR_THRESH(2), 0x40 },
{ CAP1106_REG_SENSOR_THRESH(3), 0x40 },
{ CAP1106_REG_SENSOR_THRESH(4), 0x40 },
{ CAP1106_REG_SENSOR_THRESH(5), 0x40 },
{ CAP1106_REG_SENSOR_NOISE_THRESH, 0x01 },
{ CAP1106_REG_STANDBY_CHANNEL, 0x00 },
{ CAP1106_REG_STANDBY_CONFIG, 0x39 },
{ CAP1106_REG_STANDBY_SENSITIVITY, 0x02 },
{ CAP1106_REG_STANDBY_THRESH, 0x40 },
{ CAP1106_REG_CONFIG2, 0x40 },
{ CAP1106_REG_SENSOR_CALIB_LSB1, 0x00 },
{ CAP1106_REG_SENSOR_CALIB_LSB2, 0x00 },
};
static bool cap1106_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case CAP1106_REG_MAIN_CONTROL:
case CAP1106_REG_SENSOR_INPUT:
case CAP1106_REG_SENOR_DELTA(0):
case CAP1106_REG_SENOR_DELTA(1):
case CAP1106_REG_SENOR_DELTA(2):
case CAP1106_REG_SENOR_DELTA(3):
case CAP1106_REG_SENOR_DELTA(4):
case CAP1106_REG_SENOR_DELTA(5):
case CAP1106_REG_PRODUCT_ID:
case CAP1106_REG_MANUFACTURER_ID:
case CAP1106_REG_REVISION:
return true;
}
return false;
}
static const struct regmap_config cap1106_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = CAP1106_REG_REVISION,
.reg_defaults = cap1106_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = cap1106_volatile_reg,
};
static irqreturn_t cap1106_thread_func(int irq_num, void *data)
{
struct cap1106_priv *priv = data;
unsigned int status;
int ret, i;
/*
* Deassert interrupt. This needs to be done before reading the status
* registers, which will not carry valid values otherwise.
*/
ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0);
if (ret < 0)
goto out;
ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status);
if (ret < 0)
goto out;
for (i = 0; i < CAP1106_NUM_CHN; i++)
input_report_key(priv->idev, priv->keycodes[i],
status & (1 << i));
input_sync(priv->idev);
out:
return IRQ_HANDLED;
}
static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep)
{
return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
CAP1106_REG_MAIN_CONTROL_DLSEEP,
sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0);
}
static int cap1106_input_open(struct input_dev *idev)
{
struct cap1106_priv *priv = input_get_drvdata(idev);
return cap1106_set_sleep(priv, false);
}
static void cap1106_input_close(struct input_dev *idev)
{
struct cap1106_priv *priv = input_get_drvdata(idev);
cap1106_set_sleep(priv, true);
}
static int cap1106_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct device *dev = &i2c_client->dev;
struct cap1106_priv *priv;
struct device_node *node;
int i, error, irq, gain = 0;
unsigned int val, rev;
u32 gain32, keycodes[CAP1106_NUM_CHN];
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val);
if (error)
return error;
if (val != CAP1106_PRODUCT_ID) {
dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
val, CAP1106_PRODUCT_ID);
return -ENODEV;
}
error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val);
if (error)
return error;
if (val != CAP1106_MANUFACTURER_ID) {
dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
val, CAP1106_MANUFACTURER_ID);
return -ENODEV;
}
error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev);
if (error < 0)
return error;
dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev);
i2c_set_clientdata(i2c_client, priv);
node = dev->of_node;
if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
if (is_power_of_2(gain32) && gain32 <= 8)
gain = ilog2(gain32);
else
dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
}
BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
/* Provide some useful defaults */
for (i = 0; i < ARRAY_SIZE(keycodes); i++)
keycodes[i] = KEY_A + i;
of_property_read_u32_array(node, "linux,keycodes",
keycodes, ARRAY_SIZE(keycodes));
for (i = 0; i < ARRAY_SIZE(keycodes); i++)
priv->keycodes[i] = keycodes[i];
error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
CAP1106_REG_MAIN_CONTROL_GAIN_MASK,
gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT);
if (error)
return error;
/* Disable autorepeat. The Linux input system has its own handling. */
error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0);
if (error)
return error;
priv->idev = devm_input_allocate_device(dev);
if (!priv->idev)
return -ENOMEM;
priv->idev->name = "CAP1106 capacitive touch sensor";
priv->idev->id.bustype = BUS_I2C;
priv->idev->evbit[0] = BIT_MASK(EV_KEY);
if (of_property_read_bool(node, "autorepeat"))
__set_bit(EV_REP, priv->idev->evbit);
for (i = 0; i < CAP1106_NUM_CHN; i++)
__set_bit(priv->keycodes[i], priv->idev->keybit);
__clear_bit(KEY_RESERVED, priv->idev->keybit);
priv->idev->keycode = priv->keycodes;
priv->idev->keycodesize = sizeof(priv->keycodes[0]);
priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
priv->idev->id.product = CAP1106_PRODUCT_ID;
priv->idev->id.version = rev;
priv->idev->open = cap1106_input_open;
priv->idev->close = cap1106_input_close;
input_set_drvdata(priv->idev, priv);
/*
* Put the device in deep sleep mode for now.
* ->open() will bring it back once the it is actually needed.
*/
cap1106_set_sleep(priv, true);
error = input_register_device(priv->idev);
if (error)
return error;
irq = irq_of_parse_and_map(node, 0);
if (!irq) {
dev_err(dev, "Unable to parse or map IRQ\n");
return -ENXIO;
}
error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func,
IRQF_ONESHOT, dev_name(dev), priv);
if (error)
return error;
return 0;
}
static const struct of_device_id cap1106_dt_ids[] = {
{ .compatible = "microchip,cap1106", },
{}
};
MODULE_DEVICE_TABLE(of, cap1106_dt_ids);
static const struct i2c_device_id cap1106_i2c_ids[] = {
{ "cap1106", 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids);
static struct i2c_driver cap1106_i2c_driver = {
.driver = {
.name = "cap1106",
.owner = THIS_MODULE,
.of_match_table = cap1106_dt_ids,
},
.id_table = cap1106_i2c_ids,
.probe = cap1106_i2c_probe,
};
module_i2c_driver(cap1106_i2c_driver);
MODULE_ALIAS("platform:cap1106");
MODULE_DESCRIPTION("Microchip CAP1106 driver");
MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
MODULE_LICENSE("GPL v2");

376
drivers/input/keyboard/cap11xx.c Normal file
Просмотреть файл

@ -0,0 +1,376 @@
/*
* Input driver for Microchip CAP11xx based capacitive touch sensors
*
* (c) 2014 Daniel Mack <linux@zonque.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/i2c.h>
#include <linux/gpio/consumer.h>
#define CAP11XX_REG_MAIN_CONTROL 0x00
#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6)
#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0)
#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4)
#define CAP11XX_REG_GENERAL_STATUS 0x02
#define CAP11XX_REG_SENSOR_INPUT 0x03
#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a
#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X))
#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f
#define CAP11XX_REG_CONFIG 0x20
#define CAP11XX_REG_SENSOR_ENABLE 0x21
#define CAP11XX_REG_SENSOR_CONFIG 0x22
#define CAP11XX_REG_SENSOR_CONFIG2 0x23
#define CAP11XX_REG_SAMPLING_CONFIG 0x24
#define CAP11XX_REG_CALIBRATION 0x26
#define CAP11XX_REG_INT_ENABLE 0x27
#define CAP11XX_REG_REPEAT_RATE 0x28
#define CAP11XX_REG_MT_CONFIG 0x2a
#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b
#define CAP11XX_REG_MT_PATTERN 0x2d
#define CAP11XX_REG_RECALIB_CONFIG 0x2f
#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X))
#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38
#define CAP11XX_REG_STANDBY_CHANNEL 0x40
#define CAP11XX_REG_STANDBY_CONFIG 0x41
#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42
#define CAP11XX_REG_STANDBY_THRESH 0x43
#define CAP11XX_REG_CONFIG2 0x44
#define CAP11XX_REG_CONFIG2_ALT_POL BIT(6)
#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X))
#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9
#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba
#define CAP11XX_REG_PRODUCT_ID 0xfd
#define CAP11XX_REG_MANUFACTURER_ID 0xfe
#define CAP11XX_REG_REVISION 0xff
#define CAP11XX_MANUFACTURER_ID 0x5d
struct cap11xx_priv {
struct regmap *regmap;
struct input_dev *idev;
/* config */
u32 keycodes[];
};
struct cap11xx_hw_model {
u8 product_id;
unsigned int num_channels;
};
enum {
CAP1106,
CAP1126,
CAP1188,
};
static const struct cap11xx_hw_model cap11xx_devices[] = {
[CAP1106] = { .product_id = 0x55, .num_channels = 6 },
[CAP1126] = { .product_id = 0x53, .num_channels = 6 },
[CAP1188] = { .product_id = 0x50, .num_channels = 8 },
};
static const struct reg_default cap11xx_reg_defaults[] = {
{ CAP11XX_REG_MAIN_CONTROL, 0x00 },
{ CAP11XX_REG_GENERAL_STATUS, 0x00 },
{ CAP11XX_REG_SENSOR_INPUT, 0x00 },
{ CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 },
{ CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f },
{ CAP11XX_REG_CONFIG, 0x20 },
{ CAP11XX_REG_SENSOR_ENABLE, 0x3f },
{ CAP11XX_REG_SENSOR_CONFIG, 0xa4 },
{ CAP11XX_REG_SENSOR_CONFIG2, 0x07 },
{ CAP11XX_REG_SAMPLING_CONFIG, 0x39 },
{ CAP11XX_REG_CALIBRATION, 0x00 },
{ CAP11XX_REG_INT_ENABLE, 0x3f },
{ CAP11XX_REG_REPEAT_RATE, 0x3f },
{ CAP11XX_REG_MT_CONFIG, 0x80 },
{ CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 },
{ CAP11XX_REG_MT_PATTERN, 0x3f },
{ CAP11XX_REG_RECALIB_CONFIG, 0x8a },
{ CAP11XX_REG_SENSOR_THRESH(0), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(1), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(2), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(3), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(4), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(5), 0x40 },
{ CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 },
{ CAP11XX_REG_STANDBY_CHANNEL, 0x00 },
{ CAP11XX_REG_STANDBY_CONFIG, 0x39 },
{ CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 },
{ CAP11XX_REG_STANDBY_THRESH, 0x40 },
{ CAP11XX_REG_CONFIG2, 0x40 },
{ CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 },
{ CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 },
};
static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case CAP11XX_REG_MAIN_CONTROL:
case CAP11XX_REG_SENSOR_INPUT:
case CAP11XX_REG_SENOR_DELTA(0):
case CAP11XX_REG_SENOR_DELTA(1):
case CAP11XX_REG_SENOR_DELTA(2):
case CAP11XX_REG_SENOR_DELTA(3):
case CAP11XX_REG_SENOR_DELTA(4):
case CAP11XX_REG_SENOR_DELTA(5):
case CAP11XX_REG_PRODUCT_ID:
case CAP11XX_REG_MANUFACTURER_ID:
case CAP11XX_REG_REVISION:
return true;
}
return false;
}
static const struct regmap_config cap11xx_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = CAP11XX_REG_REVISION,
.reg_defaults = cap11xx_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = cap11xx_volatile_reg,
};
static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
{
struct cap11xx_priv *priv = data;
unsigned int status;
int ret, i;
/*
* Deassert interrupt. This needs to be done before reading the status
* registers, which will not carry valid values otherwise.
*/
ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0);
if (ret < 0)
goto out;
ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status);
if (ret < 0)
goto out;
for (i = 0; i < priv->idev->keycodemax; i++)
input_report_key(priv->idev, priv->keycodes[i],
status & (1 << i));
input_sync(priv->idev);
out:
return IRQ_HANDLED;
}
static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep)
{
return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
CAP11XX_REG_MAIN_CONTROL_DLSEEP,
sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0);
}
static int cap11xx_input_open(struct input_dev *idev)
{
struct cap11xx_priv *priv = input_get_drvdata(idev);
return cap11xx_set_sleep(priv, false);
}
static void cap11xx_input_close(struct input_dev *idev)
{
struct cap11xx_priv *priv = input_get_drvdata(idev);
cap11xx_set_sleep(priv, true);
}
static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct device *dev = &i2c_client->dev;
struct cap11xx_priv *priv;
struct device_node *node;
const struct cap11xx_hw_model *cap;
int i, error, irq, gain = 0;
unsigned int val, rev;
u32 gain32;
if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
return -EINVAL;
}
cap = &cap11xx_devices[id->driver_data];
if (!cap || !cap->num_channels) {
dev_err(dev, "Invalid device configuration\n");
return -EINVAL;
}
priv = devm_kzalloc(dev,
sizeof(*priv) +
cap->num_channels * sizeof(priv->keycodes[0]),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val);
if (error)
return error;
if (val != cap->product_id) {
dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
val, cap->product_id);
return -ENXIO;
}
error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
if (error)
return error;
if (val != CAP11XX_MANUFACTURER_ID) {
dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
val, CAP11XX_MANUFACTURER_ID);
return -ENXIO;
}
error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
if (error < 0)
return error;
dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
i2c_set_clientdata(i2c_client, priv);
node = dev->of_node;
if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
if (is_power_of_2(gain32) && gain32 <= 8)
gain = ilog2(gain32);
else
dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
}
if (of_property_read_bool(node, "microchip,irq-active-high")) {
error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
CAP11XX_REG_CONFIG2_ALT_POL, 0);
if (error)
return error;
}
/* Provide some useful defaults */
for (i = 0; i < cap->num_channels; i++)
priv->keycodes[i] = KEY_A + i;
of_property_read_u32_array(node, "linux,keycodes",
priv->keycodes, cap->num_channels);
error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
if (error)
return error;
/* Disable autorepeat. The Linux input system has its own handling. */
error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
if (error)
return error;
priv->idev = devm_input_allocate_device(dev);
if (!priv->idev)
return -ENOMEM;
priv->idev->name = "CAP11XX capacitive touch sensor";
priv->idev->id.bustype = BUS_I2C;
priv->idev->evbit[0] = BIT_MASK(EV_KEY);
if (of_property_read_bool(node, "autorepeat"))
__set_bit(EV_REP, priv->idev->evbit);
for (i = 0; i < cap->num_channels; i++)
__set_bit(priv->keycodes[i], priv->idev->keybit);
__clear_bit(KEY_RESERVED, priv->idev->keybit);
priv->idev->keycode = priv->keycodes;
priv->idev->keycodesize = sizeof(priv->keycodes[0]);
priv->idev->keycodemax = cap->num_channels;
priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
priv->idev->id.product = cap->product_id;
priv->idev->id.version = rev;
priv->idev->open = cap11xx_input_open;
priv->idev->close = cap11xx_input_close;
input_set_drvdata(priv->idev, priv);
/*
* Put the device in deep sleep mode for now.
* ->open() will bring it back once the it is actually needed.
*/
cap11xx_set_sleep(priv, true);
error = input_register_device(priv->idev);
if (error)
return error;
irq = irq_of_parse_and_map(node, 0);
if (!irq) {
dev_err(dev, "Unable to parse or map IRQ\n");
return -ENXIO;
}
error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
IRQF_ONESHOT, dev_name(dev), priv);
if (error)
return error;
return 0;
}
static const struct of_device_id cap11xx_dt_ids[] = {
{ .compatible = "microchip,cap1106", },
{ .compatible = "microchip,cap1126", },
{ .compatible = "microchip,cap1188", },
{}
};
MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
static const struct i2c_device_id cap11xx_i2c_ids[] = {
{ "cap1106", CAP1106 },
{ "cap1126", CAP1126 },
{ "cap1188", CAP1188 },
{}
};
MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
static struct i2c_driver cap11xx_i2c_driver = {
.driver = {
.name = "cap11xx",
.owner = THIS_MODULE,
.of_match_table = cap11xx_dt_ids,
},
.id_table = cap11xx_i2c_ids,
.probe = cap11xx_i2c_probe,
};
module_i2c_driver(cap11xx_i2c_driver);
MODULE_ALIAS("platform:cap11xx");
MODULE_DESCRIPTION("Microchip CAP11XX driver");
MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
MODULE_LICENSE("GPL v2");

39
drivers/input/keyboard/gpio_keys.c
Просмотреть файл

@ -29,6 +29,7 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
struct gpio_button_data {
@ -617,27 +618,31 @@ gpio_keys_get_devtree_pdata(struct device *dev)
i = 0;
for_each_child_of_node(node, pp) {
int gpio;
int gpio = -1;
enum of_gpio_flags flags;
if (!of_find_property(pp, "gpios", NULL)) {
pdata->nbuttons--;
dev_warn(dev, "Found button without gpios\n");
continue;
}
gpio = of_get_gpio_flags(pp, 0, &flags);
if (gpio < 0) {
error = gpio;
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get gpio flags, error: %d\n",
error);
return ERR_PTR(error);
}
button = &pdata->buttons[i++];
if (!of_find_property(pp, "gpios", NULL)) {
button->irq = irq_of_parse_and_map(pp, 0);
if (button->irq == 0) {
i--;
pdata->nbuttons--;
dev_warn(dev, "Found button without gpios or irqs\n");
continue;
}
} else {
gpio = of_get_gpio_flags(pp, 0, &flags);
if (gpio < 0) {
error = gpio;
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get gpio flags, error: %d\n",
error);
return ERR_PTR(error);
}
}
button->gpio = gpio;
button->active_low = flags & OF_GPIO_ACTIVE_LOW;

2
drivers/input/keyboard/lm8323.c
Просмотреть файл

@ -616,6 +616,8 @@ static ssize_t lm8323_set_disable(struct device *dev,
unsigned int i;
ret = kstrtouint(buf, 10, &i);
if (ret)
return ret;
mutex_lock(&lm->lock);
lm->kp_enabled = !i;

92
drivers/input/keyboard/lpc32xx-keys.c
Просмотреть файл

@ -66,7 +66,6 @@
struct lpc32xx_kscan_drv {
struct input_dev *input;
struct clk *clk;
struct resource *iores;
void __iomem *kscan_base;
unsigned int irq;
@ -188,32 +187,27 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
return -EINVAL;
}
kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
if (!kscandat) {
dev_err(&pdev->dev, "failed to allocate memory\n");
kscandat = devm_kzalloc(&pdev->dev, sizeof(*kscandat),
GFP_KERNEL);
if (!kscandat)
return -ENOMEM;
}
error = lpc32xx_parse_dt(&pdev->dev, kscandat);
if (error) {
dev_err(&pdev->dev, "failed to parse device tree\n");
goto err_free_mem;
return error;
}
keymap_size = sizeof(kscandat->keymap[0]) *
(kscandat->matrix_sz << kscandat->row_shift);
kscandat->keymap = kzalloc(keymap_size, GFP_KERNEL);
if (!kscandat->keymap) {
dev_err(&pdev->dev, "could not allocate memory for keymap\n");
error = -ENOMEM;
goto err_free_mem;
}
kscandat->keymap = devm_kzalloc(&pdev->dev, keymap_size, GFP_KERNEL);
if (!kscandat->keymap)
return -ENOMEM;
kscandat->input = input = input_allocate_device();
kscandat->input = input = devm_input_allocate_device(&pdev->dev);
if (!input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
error = -ENOMEM;
goto err_free_keymap;
return -ENOMEM;
}
/* Setup key input */
@ -234,39 +228,26 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
kscandat->keymap, kscandat->input);
if (error) {
dev_err(&pdev->dev, "failed to build keymap\n");
goto err_free_input;
return error;
}
input_set_drvdata(kscandat->input, kscandat);
kscandat->iores = request_mem_region(res->start, resource_size(res),
pdev->name);
if (!kscandat->iores) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
error = -EBUSY;
goto err_free_input;
}
kscandat->kscan_base = ioremap(kscandat->iores->start,
resource_size(kscandat->iores));
if (!kscandat->kscan_base) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -EBUSY;
goto err_release_memregion;
}
kscandat->kscan_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(kscandat->kscan_base))
return PTR_ERR(kscandat->kscan_base);
/* Get the key scanner clock */
kscandat->clk = clk_get(&pdev->dev, NULL);
kscandat->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(kscandat->clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
error = PTR_ERR(kscandat->clk);
goto err_unmap;
return PTR_ERR(kscandat->clk);
}
/* Configure the key scanner */
error = clk_prepare_enable(kscandat->clk);
if (error)
goto err_clk_put;
return error;
writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
@ -277,52 +258,20 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
clk_disable_unprepare(kscandat->clk);
error = request_irq(irq, lpc32xx_kscan_irq, 0, pdev->name, kscandat);
error = devm_request_irq(&pdev->dev, irq, lpc32xx_kscan_irq, 0,
pdev->name, kscandat);
if (error) {
dev_err(&pdev->dev, "failed to request irq\n");
goto err_clk_put;
return error;
}
error = input_register_device(kscandat->input);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
goto err_free_irq;
return error;
}
platform_set_drvdata(pdev, kscandat);
return 0;
err_free_irq:
free_irq(irq, kscandat);
err_clk_put:
clk_put(kscandat->clk);
err_unmap:
iounmap(kscandat->kscan_base);
err_release_memregion:
release_mem_region(kscandat->iores->start,
resource_size(kscandat->iores));
err_free_input:
input_free_device(kscandat->input);
err_free_keymap:
kfree(kscandat->keymap);
err_free_mem:
kfree(kscandat);
return error;
}
static int lpc32xx_kscan_remove(struct platform_device *pdev)
{
struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
free_irq(platform_get_irq(pdev, 0), kscandat);
clk_put(kscandat->clk);
iounmap(kscandat->kscan_base);
release_mem_region(kscandat->iores->start,
resource_size(kscandat->iores));
input_unregister_device(kscandat->input);
kfree(kscandat->keymap);
kfree(kscandat);
return 0;
}
@ -378,7 +327,6 @@ MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
static struct platform_driver lpc32xx_kscan_driver = {
.probe = lpc32xx_kscan_probe,
.remove = lpc32xx_kscan_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,

42
drivers/input/keyboard/mpr121_touchkey.c
Просмотреть файл

@ -214,13 +214,14 @@ static int mpr_touchkey_probe(struct i2c_client *client,
return -EINVAL;
}
mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL);
input_dev = input_allocate_device();
if (!mpr121 || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
error = -ENOMEM;
goto err_free_mem;
}
mpr121 = devm_kzalloc(&client->dev, sizeof(*mpr121),
GFP_KERNEL);
if (!mpr121)
return -ENOMEM;
input_dev = devm_input_allocate_device(&client->dev);
if (!input_dev)
return -ENOMEM;
mpr121->client = client;
mpr121->input_dev = input_dev;
@ -243,43 +244,25 @@ static int mpr_touchkey_probe(struct i2c_client *client,
error = mpr121_phys_init(pdata, mpr121, client);
if (error) {
dev_err(&client->dev, "Failed to init register\n");
goto err_free_mem;
return error;
}
error = request_threaded_irq(client->irq, NULL,
error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
mpr_touchkey_interrupt,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->dev.driver->name, mpr121);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
return error;
}
error = input_register_device(input_dev);
if (error)
goto err_free_irq;
return error;
i2c_set_clientdata(client, mpr121);
device_init_wakeup(&client->dev, pdata->wakeup);
return 0;
err_free_irq:
free_irq(client->irq, mpr121);
err_free_mem:
input_free_device(input_dev);
kfree(mpr121);
return error;
}
static int mpr_touchkey_remove(struct i2c_client *client)
{
struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
free_irq(client->irq, mpr121);
input_unregister_device(mpr121->input_dev);
kfree(mpr121);
return 0;
}
@ -327,7 +310,6 @@ static struct i2c_driver mpr_touchkey_driver = {
},
.id_table = mpr121_id,
.probe = mpr_touchkey_probe,
.remove = mpr_touchkey_remove,
};
module_i2c_driver(mpr_touchkey_driver);

84
drivers/input/keyboard/pxa27x_keypad.c
Просмотреть файл

@ -741,37 +741,27 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
return -ENXIO;
}
keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !input_dev) {
dev_err(&pdev->dev, "failed to allocate memory\n");
error = -ENOMEM;
goto failed_free;
}
keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad),
GFP_KERNEL);
if (!keypad)
return -ENOMEM;
input_dev = devm_input_allocate_device(&pdev->dev);
if (!input_dev)
return -ENOMEM;
keypad->pdata = pdata;
keypad->input_dev = input_dev;
keypad->irq = irq;
res = request_mem_region(res->start, resource_size(res), pdev->name);
if (res == NULL) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
error = -EBUSY;
goto failed_free;
}
keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad->mmio_base))
return PTR_ERR(keypad->mmio_base);
keypad->mmio_base = ioremap(res->start, resource_size(res));
if (keypad->mmio_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
goto failed_free_mem;
}
keypad->clk = clk_get(&pdev->dev, NULL);
keypad->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(keypad->clk)) {
dev_err(&pdev->dev, "failed to get keypad clock\n");
error = PTR_ERR(keypad->clk);
goto failed_free_io;
return PTR_ERR(keypad->clk);
}
input_dev->name = pdev->name;
@ -802,7 +792,7 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
}
if (error) {
dev_err(&pdev->dev, "failed to build keycode\n");
goto failed_put_clk;
return error;
}
keypad->row_shift = get_count_order(pdata->matrix_key_cols);
@ -812,61 +802,26 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
input_dev->evbit[0] |= BIT_MASK(EV_REL);
}
error = request_irq(irq, pxa27x_keypad_irq_handler, 0,
pdev->name, keypad);
error = devm_request_irq(&pdev->dev, irq, pxa27x_keypad_irq_handler,
0, pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto failed_put_clk;
return error;
}
/* Register the input device */
error = input_register_device(input_dev);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
goto failed_free_irq;
return error;
}
platform_set_drvdata(pdev, keypad);
device_init_wakeup(&pdev->dev, 1);
return 0;
failed_free_irq:
free_irq(irq, keypad);
failed_put_clk:
clk_put(keypad->clk);
failed_free_io:
iounmap(keypad->mmio_base);
failed_free_mem:
release_mem_region(res->start, resource_size(res));
failed_free:
input_free_device(input_dev);
kfree(keypad);
return error;
}
static int pxa27x_keypad_remove(struct platform_device *pdev)
{
struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
struct resource *res;
free_irq(keypad->irq, keypad);
clk_put(keypad->clk);
input_unregister_device(keypad->input_dev);
iounmap(keypad->mmio_base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
kfree(keypad);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:pxa27x-keypad");
#ifdef CONFIG_OF
static const struct of_device_id pxa27x_keypad_dt_match[] = {
{ .compatible = "marvell,pxa27x-keypad" },
@ -877,7 +832,6 @@ MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
static struct platform_driver pxa27x_keypad_driver = {
.probe = pxa27x_keypad_probe,
.remove = pxa27x_keypad_remove,
.driver = {
.name = "pxa27x-keypad",
.of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
@ -889,3 +843,5 @@ module_platform_driver(pxa27x_keypad_driver);
MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
MODULE_LICENSE("GPL");
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:pxa27x-keypad");

6
drivers/input/misc/88pm860x_onkey.c
Просмотреть файл

@ -112,8 +112,7 @@ static int pm860x_onkey_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int pm860x_onkey_suspend(struct device *dev)
static int __maybe_unused pm860x_onkey_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@ -122,7 +121,7 @@ static int pm860x_onkey_suspend(struct device *dev)
chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY;
return 0;
}
static int pm860x_onkey_resume(struct device *dev)
static int __maybe_unused pm860x_onkey_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@ -131,7 +130,6 @@ static int pm860x_onkey_resume(struct device *dev)
chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume);

6
drivers/input/misc/ad714x-i2c.c
Просмотреть файл

@ -13,17 +13,15 @@
#include <linux/pm.h>
#include "ad714x.h"
#ifdef CONFIG_PM_SLEEP
static int ad714x_i2c_suspend(struct device *dev)
static int __maybe_unused ad714x_i2c_suspend(struct device *dev)
{
return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));
}
static int ad714x_i2c_resume(struct device *dev)
static int __maybe_unused ad714x_i2c_resume(struct device *dev)
{
return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev)));
}
#endif
static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);

6
drivers/input/misc/ad714x-spi.c
Просмотреть файл

@ -16,17 +16,15 @@
#define AD714x_SPI_CMD_PREFIX 0xE000 /* bits 15:11 */
#define AD714x_SPI_READ BIT(10)
#ifdef CONFIG_PM_SLEEP
static int ad714x_spi_suspend(struct device *dev)
static int __maybe_unused ad714x_spi_suspend(struct device *dev)
{
return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));
}
static int ad714x_spi_resume(struct device *dev)
static int __maybe_unused ad714x_spi_resume(struct device *dev)
{
return ad714x_enable(spi_get_drvdata(to_spi_device(dev)));
}
#endif
static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);

6
drivers/input/misc/adxl34x-i2c.c
Просмотреть файл

@ -105,8 +105,7 @@ static int adxl34x_i2c_remove(struct i2c_client *client)
return adxl34x_remove(ac);
}
#ifdef CONFIG_PM_SLEEP
static int adxl34x_i2c_suspend(struct device *dev)
static int __maybe_unused adxl34x_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adxl34x *ac = i2c_get_clientdata(client);
@ -116,7 +115,7 @@ static int adxl34x_i2c_suspend(struct device *dev)
return 0;
}
static int adxl34x_i2c_resume(struct device *dev)
static int __maybe_unused adxl34x_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adxl34x *ac = i2c_get_clientdata(client);
@ -125,7 +124,6 @@ static int adxl34x_i2c_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(adxl34x_i2c_pm, adxl34x_i2c_suspend,
adxl34x_i2c_resume);

6
drivers/input/misc/adxl34x-spi.c
Просмотреть файл

@ -94,8 +94,7 @@ static int adxl34x_spi_remove(struct spi_device *spi)
return adxl34x_remove(ac);
}
#ifdef CONFIG_PM_SLEEP
static int adxl34x_spi_suspend(struct device *dev)
static int __maybe_unused adxl34x_spi_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct adxl34x *ac = spi_get_drvdata(spi);
@ -105,7 +104,7 @@ static int adxl34x_spi_suspend(struct device *dev)
return 0;
}
static int adxl34x_spi_resume(struct device *dev)
static int __maybe_unused adxl34x_spi_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct adxl34x *ac = spi_get_drvdata(spi);
@ -114,7 +113,6 @@ static int adxl34x_spi_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend,
adxl34x_spi_resume);

6
drivers/input/misc/drv260x.c
Просмотреть файл

@ -639,8 +639,7 @@ static int drv260x_probe(struct i2c_client *client,
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int drv260x_suspend(struct device *dev)
static int __maybe_unused drv260x_suspend(struct device *dev)
{
struct drv260x_data *haptics = dev_get_drvdata(dev);
int ret = 0;
@ -672,7 +671,7 @@ out:
return ret;
}
static int drv260x_resume(struct device *dev)
static int __maybe_unused drv260x_resume(struct device *dev)
{
struct drv260x_data *haptics = dev_get_drvdata(dev);
int ret = 0;
@ -702,7 +701,6 @@ out:
mutex_unlock(&haptics->input_dev->mutex);
return ret;
}
#endif
static SIMPLE_DEV_PM_OPS(drv260x_pm_ops, drv260x_suspend, drv260x_resume);

6
drivers/input/misc/drv2667.c
Просмотреть файл

@ -406,8 +406,7 @@ static int drv2667_probe(struct i2c_client *client,
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int drv2667_suspend(struct device *dev)
static int __maybe_unused drv2667_suspend(struct device *dev)
{
struct drv2667_data *haptics = dev_get_drvdata(dev);
int ret = 0;
@ -436,7 +435,7 @@ out:
return ret;
}
static int drv2667_resume(struct device *dev)
static int __maybe_unused drv2667_resume(struct device *dev)
{
struct drv2667_data *haptics = dev_get_drvdata(dev);
int ret = 0;
@ -464,7 +463,6 @@ out:
mutex_unlock(&haptics->input_dev->mutex);
return ret;
}
#endif
static SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);

6
drivers/input/misc/gp2ap002a00f.c
Просмотреть файл

@ -225,8 +225,7 @@ static int gp2a_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int gp2a_suspend(struct device *dev)
static int __maybe_unused gp2a_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct gp2a_data *dt = i2c_get_clientdata(client);
@ -244,7 +243,7 @@ static int gp2a_suspend(struct device *dev)
return retval;
}
static int gp2a_resume(struct device *dev)
static int __maybe_unused gp2a_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct gp2a_data *dt = i2c_get_clientdata(client);
@ -261,7 +260,6 @@ static int gp2a_resume(struct device *dev)
return retval;
}
#endif
static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);

4
drivers/input/misc/ims-pcu.c
Просмотреть файл

@ -1851,7 +1851,7 @@ static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id)
static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
{
static atomic_t device_no = ATOMIC_INIT(0);
static atomic_t device_no = ATOMIC_INIT(-1);
const struct ims_pcu_device_info *info;
int error;
@ -1882,7 +1882,7 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
}
/* Device appears to be operable, complete initialization */
pcu->device_no = atomic_inc_return(&device_no) - 1;
pcu->device_no = atomic_inc_return(&device_no);
/*
* PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor

6
drivers/input/misc/kxtj9.c
Просмотреть файл

@ -615,8 +615,7 @@ static int kxtj9_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int kxtj9_suspend(struct device *dev)
static int __maybe_unused kxtj9_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct kxtj9_data *tj9 = i2c_get_clientdata(client);
@ -631,7 +630,7 @@ static int kxtj9_suspend(struct device *dev)
return 0;
}
static int kxtj9_resume(struct device *dev)
static int __maybe_unused kxtj9_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct kxtj9_data *tj9 = i2c_get_clientdata(client);
@ -646,7 +645,6 @@ static int kxtj9_resume(struct device *dev)
mutex_unlock(&input_dev->mutex);
return retval;
}
#endif
static SIMPLE_DEV_PM_OPS(kxtj9_pm_ops, kxtj9_suspend, kxtj9_resume);

6
drivers/input/misc/max77693-haptic.c
Просмотреть файл

@ -309,8 +309,7 @@ static int max77693_haptic_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int max77693_haptic_suspend(struct device *dev)
static int __maybe_unused max77693_haptic_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max77693_haptic *haptic = platform_get_drvdata(pdev);
@ -323,7 +322,7 @@ static int max77693_haptic_suspend(struct device *dev)
return 0;
}
static int max77693_haptic_resume(struct device *dev)
static int __maybe_unused max77693_haptic_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max77693_haptic *haptic = platform_get_drvdata(pdev);
@ -335,7 +334,6 @@ static int max77693_haptic_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
max77693_haptic_suspend, max77693_haptic_resume);

6
drivers/input/misc/max8925_onkey.c
Просмотреть файл

@ -133,8 +133,7 @@ static int max8925_onkey_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int max8925_onkey_suspend(struct device *dev)
static int __maybe_unused max8925_onkey_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max8925_onkey_info *info = platform_get_drvdata(pdev);
@ -148,7 +147,7 @@ static int max8925_onkey_suspend(struct device *dev)
return 0;
}
static int max8925_onkey_resume(struct device *dev)
static int __maybe_unused max8925_onkey_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max8925_onkey_info *info = platform_get_drvdata(pdev);
@ -161,7 +160,6 @@ static int max8925_onkey_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(max8925_onkey_pm_ops, max8925_onkey_suspend, max8925_onkey_resume);

4
drivers/input/misc/max8997_haptic.c
Просмотреть файл

@ -378,8 +378,7 @@ static int max8997_haptic_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int max8997_haptic_suspend(struct device *dev)
static int __maybe_unused max8997_haptic_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct max8997_haptic *chip = platform_get_drvdata(pdev);
@ -388,7 +387,6 @@ static int max8997_haptic_suspend(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(max8997_haptic_pm_ops, max8997_haptic_suspend, NULL);

6
drivers/input/misc/palmas-pwrbutton.c
Просмотреть файл

@ -260,7 +260,6 @@ static int palmas_pwron_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
/**
* palmas_pwron_suspend() - suspend handler
* @dev: power button device
@ -269,7 +268,7 @@ static int palmas_pwron_remove(struct platform_device *pdev)
*
* Return: 0
*/
static int palmas_pwron_suspend(struct device *dev)
static int __maybe_unused palmas_pwron_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct palmas_pwron *pwron = platform_get_drvdata(pdev);
@ -290,7 +289,7 @@ static int palmas_pwron_suspend(struct device *dev)
*
* Return: 0
*/
static int palmas_pwron_resume(struct device *dev)
static int __maybe_unused palmas_pwron_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct palmas_pwron *pwron = platform_get_drvdata(pdev);
@ -300,7 +299,6 @@ static int palmas_pwron_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(palmas_pwron_pm,
palmas_pwron_suspend, palmas_pwron_resume);

4
drivers/input/misc/pm8xxx-vibrator.c
Просмотреть файл

@ -199,8 +199,7 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int pm8xxx_vib_suspend(struct device *dev)
static int __maybe_unused pm8xxx_vib_suspend(struct device *dev)
{
struct pm8xxx_vib *vib = dev_get_drvdata(dev);
@ -209,7 +208,6 @@ static int pm8xxx_vib_suspend(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);

6
drivers/input/misc/pmic8xxx-pwrkey.c
Просмотреть файл

@ -53,8 +53,7 @@ static irqreturn_t pwrkey_release_irq(int irq, void *_pwr)
return IRQ_HANDLED;
}
#ifdef CONFIG_PM_SLEEP
static int pmic8xxx_pwrkey_suspend(struct device *dev)
static int __maybe_unused pmic8xxx_pwrkey_suspend(struct device *dev)
{
struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev);
@ -64,7 +63,7 @@ static int pmic8xxx_pwrkey_suspend(struct device *dev)
return 0;
}
static int pmic8xxx_pwrkey_resume(struct device *dev)
static int __maybe_unused pmic8xxx_pwrkey_resume(struct device *dev)
{
struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev);
@ -73,7 +72,6 @@ static int pmic8xxx_pwrkey_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(pm8xxx_pwr_key_pm_ops,
pmic8xxx_pwrkey_suspend, pmic8xxx_pwrkey_resume);

6
drivers/input/misc/pwm-beeper.c
Просмотреть файл

@ -144,8 +144,7 @@ static int pwm_beeper_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int pwm_beeper_suspend(struct device *dev)
static int __maybe_unused pwm_beeper_suspend(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
@ -155,7 +154,7 @@ static int pwm_beeper_suspend(struct device *dev)
return 0;
}
static int pwm_beeper_resume(struct device *dev)
static int __maybe_unused pwm_beeper_resume(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
@ -170,6 +169,7 @@ static int pwm_beeper_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
pwm_beeper_suspend, pwm_beeper_resume);
#ifdef CONFIG_PM_SLEEP
#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
#else
#define PWM_BEEPER_PM_OPS NULL

4
drivers/input/misc/sirfsoc-onkey.c
Просмотреть файл

@ -179,8 +179,7 @@ static int sirfsoc_pwrc_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sirfsoc_pwrc_resume(struct device *dev)
static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
struct input_dev *input = pwrcdrv->input;
@ -196,7 +195,6 @@ static int sirfsoc_pwrc_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);

6
drivers/input/misc/twl4030-vibra.c
Просмотреть файл

@ -157,8 +157,7 @@ static void twl4030_vibra_close(struct input_dev *input)
}
/*** Module ***/
#ifdef CONFIG_PM_SLEEP
static int twl4030_vibra_suspend(struct device *dev)
static int __maybe_unused twl4030_vibra_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct vibra_info *info = platform_get_drvdata(pdev);
@ -169,12 +168,11 @@ static int twl4030_vibra_suspend(struct device *dev)
return 0;
}
static int twl4030_vibra_resume(struct device *dev)
static int __maybe_unused twl4030_vibra_resume(struct device *dev)
{
vibra_disable_leds();
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
twl4030_vibra_suspend, twl4030_vibra_resume);

4
drivers/input/misc/twl6040-vibra.c
Просмотреть файл

@ -236,8 +236,7 @@ static void twl6040_vibra_close(struct input_dev *input)
mutex_unlock(&info->mutex);
}
#ifdef CONFIG_PM_SLEEP
static int twl6040_vibra_suspend(struct device *dev)
static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct vibra_info *info = platform_get_drvdata(pdev);
@ -251,7 +250,6 @@ static int twl6040_vibra_suspend(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);

30
drivers/input/mouse/Kconfig
Просмотреть файл

@ -215,6 +215,36 @@ config MOUSE_CYAPA
To compile this driver as a module, choose M here: the module will be
called cyapa.
config MOUSE_ELAN_I2C
tristate "ELAN I2C Touchpad support"
depends on I2C
help
This driver adds support for Elan I2C/SMbus Trackpads.
Say Y here if you have a ELAN I2C/SMbus Touchpad.
To compile this driver as a module, choose M here: the module will be
called elan_i2c.
config MOUSE_ELAN_I2C_I2C
bool "Enable I2C support"
depends on MOUSE_ELAN_I2C
default y
help
Say Y here if Elan Touchpad in your system is connected to
a standard I2C controller.
If unsure, say Y.
config MOUSE_ELAN_I2C_SMBUS
bool "Enable SMbus support"
depends on MOUSE_ELAN_I2C
help
Say Y here if Elan Touchpad in your system is connected to
a SMbus adapter.
If unsure, say Y.
config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
depends on ISA

5
drivers/input/mouse/Makefile
Просмотреть файл

@ -9,6 +9,7 @@ obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o
obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o
obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
@ -34,3 +35,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o
psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o
elan_i2c-objs := elan_i2c_core.o
elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o
elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS) += elan_i2c_smbus.o

289
drivers/input/mouse/cyapa.c
Просмотреть файл

@ -6,7 +6,7 @@
* Daniel Kurtz <djkurtz@chromium.org>
* Benson Leung <bleung@chromium.org>
*
* Copyright (C) 2011-2012 Cypress Semiconductor, Inc.
* Copyright (C) 2011-2014 Cypress Semiconductor, Inc.
* Copyright (C) 2011-2012 Google, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@ -206,7 +206,6 @@ struct cyapa {
struct i2c_client *client;
struct input_dev *input;
char phys[32]; /* device physical location */
int irq;
bool irq_wake; /* irq wake is enabled */
bool smbus;
@ -422,8 +421,8 @@ static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values)
*/
static int cyapa_get_state(struct cyapa *cyapa)
{
int ret;
u8 status[BL_STATUS_SIZE];
int error;
cyapa->state = CYAPA_STATE_NO_DEVICE;
@ -433,18 +432,18 @@ static int cyapa_get_state(struct cyapa *cyapa)
* If the device is in operation mode, this will be the DATA regs.
*
*/
ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
status);
error = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
status);
/*
* On smbus systems in OP mode, the i2c_reg_read will fail with
* -ETIMEDOUT. In this case, try again using the smbus equivalent
* command. This should return a BL_HEAD indicating CYAPA_STATE_OP.
*/
if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO))
ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
if (cyapa->smbus && (error == -ETIMEDOUT || error == -ENXIO))
error = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
if (ret != BL_STATUS_SIZE)
if (error != BL_STATUS_SIZE)
goto error;
if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) {
@ -454,7 +453,7 @@ static int cyapa_get_state(struct cyapa *cyapa)
cyapa->state = CYAPA_STATE_OP;
break;
default:
ret = -EAGAIN;
error = -EAGAIN;
goto error;
}
} else {
@ -468,7 +467,7 @@ static int cyapa_get_state(struct cyapa *cyapa)
return 0;
error:
return (ret < 0) ? ret : -EAGAIN;
return (error < 0) ? error : -EAGAIN;
}
/*
@ -487,31 +486,31 @@ error:
*/
static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout)
{
int ret;
int error;
int tries = timeout / 100;
ret = cyapa_get_state(cyapa);
while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
error = cyapa_get_state(cyapa);
while ((error || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
msleep(100);
ret = cyapa_get_state(cyapa);
error = cyapa_get_state(cyapa);
}
return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret;
return (error == -EAGAIN || error == -ETIMEDOUT) ? -ETIMEDOUT : error;
}
static int cyapa_bl_deactivate(struct cyapa *cyapa)
{
int ret;
int error;
ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
bl_deactivate);
if (ret < 0)
return ret;
error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
bl_deactivate);
if (error)
return error;
/* wait for bootloader to switch to idle state; should take < 100ms */
msleep(100);
ret = cyapa_poll_state(cyapa, 500);
if (ret < 0)
return ret;
error = cyapa_poll_state(cyapa, 500);
if (error)
return error;
if (cyapa->state != CYAPA_STATE_BL_IDLE)
return -EAGAIN;
return 0;
@ -532,11 +531,11 @@ static int cyapa_bl_deactivate(struct cyapa *cyapa)
*/
static int cyapa_bl_exit(struct cyapa *cyapa)
{
int ret;
int error;
ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
if (ret < 0)
return ret;
error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
if (error)
return error;
/*
* Wait for bootloader to exit, and operation mode to start.
@ -548,9 +547,9 @@ static int cyapa_bl_exit(struct cyapa *cyapa)
* updated to new firmware, it must first calibrate its sensors, which
* can take up to an additional 2 seconds.
*/
ret = cyapa_poll_state(cyapa, 2000);
if (ret < 0)
return ret;
error = cyapa_poll_state(cyapa, 2000);
if (error < 0)
return error;
if (cyapa->state != CYAPA_STATE_OP)
return -EAGAIN;
@ -577,10 +576,13 @@ static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode)
power = ret & ~PWR_MODE_MASK;
power |= power_mode & PWR_MODE_MASK;
ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power);
if (ret < 0)
if (ret < 0) {
dev_err(dev, "failed to set power_mode 0x%02x err = %d\n",
power_mode, ret);
return ret;
return ret;
}
return 0;
}
static int cyapa_get_query_data(struct cyapa *cyapa)
@ -637,28 +639,28 @@ static int cyapa_check_is_operational(struct cyapa *cyapa)
{
struct device *dev = &cyapa->client->dev;
static const char unique_str[] = "CYTRA";
int ret;
int error;
ret = cyapa_poll_state(cyapa, 2000);
if (ret < 0)
return ret;
error = cyapa_poll_state(cyapa, 2000);
if (error)
return error;
switch (cyapa->state) {
case CYAPA_STATE_BL_ACTIVE:
ret = cyapa_bl_deactivate(cyapa);
if (ret)
return ret;
error = cyapa_bl_deactivate(cyapa);
if (error)
return error;
/* Fallthrough state */
case CYAPA_STATE_BL_IDLE:
ret = cyapa_bl_exit(cyapa);
if (ret)
return ret;
error = cyapa_bl_exit(cyapa);
if (error)
return error;
/* Fallthrough state */
case CYAPA_STATE_OP:
ret = cyapa_get_query_data(cyapa);
if (ret < 0)
return ret;
error = cyapa_get_query_data(cyapa);
if (error)
return error;
/* only support firmware protocol gen3 */
if (cyapa->gen != CYAPA_GEN3) {
@ -753,18 +755,42 @@ static u8 cyapa_check_adapter_functionality(struct i2c_client *client)
return ret;
}
static int cyapa_open(struct input_dev *input)
{
struct cyapa *cyapa = input_get_drvdata(input);
struct i2c_client *client = cyapa->client;
int error;
error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
if (error) {
dev_err(&client->dev, "set active power failed: %d\n", error);
return error;
}
enable_irq(client->irq);
return 0;
}
static void cyapa_close(struct input_dev *input)
{
struct cyapa *cyapa = input_get_drvdata(input);
disable_irq(cyapa->client->irq);
cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
}
static int cyapa_create_input_dev(struct cyapa *cyapa)
{
struct device *dev = &cyapa->client->dev;
int ret;
struct input_dev *input;
int error;
if (!cyapa->physical_size_x || !cyapa->physical_size_y)
return -EINVAL;
input = cyapa->input = input_allocate_device();
input = devm_input_allocate_device(dev);
if (!input) {
dev_err(dev, "allocate memory for input device failed\n");
dev_err(dev, "failed to allocate memory for input device.\n");
return -ENOMEM;
}
@ -772,14 +798,17 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
input->phys = cyapa->phys;
input->id.bustype = BUS_I2C;
input->id.version = 1;
input->id.product = 0; /* means any product in eventcomm. */
input->id.product = 0; /* Means any product in eventcomm. */
input->dev.parent = &cyapa->client->dev;
input->open = cyapa_open;
input->close = cyapa_close;
input_set_drvdata(input, cyapa);
__set_bit(EV_ABS, input->evbit);
/* finger position */
/* Finger position */
input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0,
0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0,
@ -801,35 +830,25 @@ static int cyapa_create_input_dev(struct cyapa *cyapa)
if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK)
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
/* handle pointer emulation and unused slots in core */
ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
if (ret) {
dev_err(dev, "allocate memory for MT slots failed, %d\n", ret);
goto err_free_device;
/* Handle pointer emulation and unused slots in core */
error = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
if (error) {
dev_err(dev, "failed to initialize MT slots: %d\n", error);
return error;
}
/* Register the device in input subsystem */
ret = input_register_device(input);
if (ret) {
dev_err(dev, "input device register failed, %d\n", ret);
goto err_free_device;
}
cyapa->input = input;
return 0;
err_free_device:
input_free_device(input);
cyapa->input = NULL;
return ret;
}
static int cyapa_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
int ret;
u8 adapter_func;
struct cyapa *cyapa;
struct device *dev = &client->dev;
struct cyapa *cyapa;
u8 adapter_func;
int error;
adapter_func = cyapa_check_adapter_functionality(client);
if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) {
@ -837,11 +856,9 @@ static int cyapa_probe(struct i2c_client *client,
return -EIO;
}
cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL);
if (!cyapa) {
dev_err(dev, "allocate memory for cyapa failed\n");
cyapa = devm_kzalloc(dev, sizeof(struct cyapa), GFP_KERNEL);
if (!cyapa)
return -ENOMEM;
}
cyapa->gen = CYAPA_GEN3;
cyapa->client = client;
@ -852,67 +869,61 @@ static int cyapa_probe(struct i2c_client *client,
/* i2c isn't supported, use smbus */
if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS)
cyapa->smbus = true;
cyapa->state = CYAPA_STATE_NO_DEVICE;
ret = cyapa_check_is_operational(cyapa);
if (ret) {
dev_err(dev, "device not operational, %d\n", ret);
goto err_mem_free;
error = cyapa_check_is_operational(cyapa);
if (error) {
dev_err(dev, "device not operational, %d\n", error);
return error;
}
ret = cyapa_create_input_dev(cyapa);
if (ret) {
dev_err(dev, "create input_dev instance failed, %d\n", ret);
goto err_mem_free;
/* Power down the device until we need it */
error = cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
if (error) {
dev_err(dev, "failed to quiesce the device: %d\n", error);
return error;
}
ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
if (ret) {
dev_err(dev, "set active power failed, %d\n", ret);
goto err_unregister_device;
error = cyapa_create_input_dev(cyapa);
if (error)
return error;
error = devm_request_threaded_irq(dev, client->irq,
NULL, cyapa_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"cyapa", cyapa);
if (error) {
dev_err(dev, "failed to request threaded irq: %d\n", error);
return error;
}
cyapa->irq = client->irq;
ret = request_threaded_irq(cyapa->irq,
NULL,
cyapa_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"cyapa",
cyapa);
if (ret) {
dev_err(dev, "IRQ request failed: %d\n, ", ret);
goto err_unregister_device;
/* Disable IRQ until the device is opened */
disable_irq(client->irq);
/* Register the device in input subsystem */
error = input_register_device(cyapa->input);
if (error) {
dev_err(dev, "failed to register input device: %d\n", error);
return error;
}
return 0;
err_unregister_device:
input_unregister_device(cyapa->input);
err_mem_free:
kfree(cyapa);
return ret;
}
static int cyapa_remove(struct i2c_client *client)
static int __maybe_unused cyapa_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct cyapa *cyapa = i2c_get_clientdata(client);
free_irq(cyapa->irq, cyapa);
input_unregister_device(cyapa->input);
cyapa_set_power_mode(cyapa, PWR_MODE_OFF);
kfree(cyapa);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int cyapa_suspend(struct device *dev)
{
int ret;
struct input_dev *input = cyapa->input;
u8 power_mode;
struct cyapa *cyapa = dev_get_drvdata(dev);
int error;
disable_irq(cyapa->irq);
error = mutex_lock_interruptible(&input->mutex);
if (error)
return error;
disable_irq(client->irq);
/*
* Set trackpad device to idle mode if wakeup is allowed,
@ -920,31 +931,44 @@ static int cyapa_suspend(struct device *dev)
*/
power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE
: PWR_MODE_OFF;
ret = cyapa_set_power_mode(cyapa, power_mode);
if (ret < 0)
dev_err(dev, "set power mode failed, %d\n", ret);
error = cyapa_set_power_mode(cyapa, power_mode);
if (error)
dev_err(dev, "resume: set power mode to %d failed: %d\n",
power_mode, error);
if (device_may_wakeup(dev))
cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0);
cyapa->irq_wake = (enable_irq_wake(client->irq) == 0);
mutex_unlock(&input->mutex);
return 0;
}
static int cyapa_resume(struct device *dev)
static int __maybe_unused cyapa_resume(struct device *dev)
{
int ret;
struct cyapa *cyapa = dev_get_drvdata(dev);
struct i2c_client *client = to_i2c_client(dev);
struct cyapa *cyapa = i2c_get_clientdata(client);
struct input_dev *input = cyapa->input;
u8 power_mode;
int error;
mutex_lock(&input->mutex);
if (device_may_wakeup(dev) && cyapa->irq_wake)
disable_irq_wake(cyapa->irq);
disable_irq_wake(client->irq);
ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
if (ret)
dev_warn(dev, "resume active power failed, %d\n", ret);
power_mode = input->users ? PWR_MODE_FULL_ACTIVE : PWR_MODE_OFF;
error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE);
if (error)
dev_warn(dev, "resume: set power mode to %d failed: %d\n",
power_mode, error);
enable_irq(client->irq);
mutex_unlock(&input->mutex);
enable_irq(cyapa->irq);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume);
@ -962,7 +986,6 @@ static struct i2c_driver cyapa_driver = {
},
.probe = cyapa_probe,
.remove = cyapa_remove,
.id_table = cyapa_id_table,
};

86
drivers/input/mouse/elan_i2c.h Normal file
Просмотреть файл

@ -0,0 +1,86 @@
/*
* Elan I2C/SMBus Touchpad driver
*
* Copyright (c) 2013 ELAN Microelectronics Corp.
*
* Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
* Version: 1.5.5
*
* Based on cyapa driver:
* copyright (c) 2011-2012 Cypress Semiconductor, Inc.
* copyright (c) 2011-2012 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Trademarks are the property of their respective owners.
*/
#ifndef _ELAN_I2C_H
#define _ELAN_i2C_H
#include <linux/types.h>
#define ETP_ENABLE_ABS 0x0001
#define ETP_ENABLE_CALIBRATE 0x0002
#define ETP_DISABLE_CALIBRATE 0x0000
#define ETP_DISABLE_POWER 0x0001
/* IAP Firmware handling */
#define ETP_FW_NAME "elan_i2c.bin"
#define ETP_IAP_START_ADDR 0x0083
#define ETP_FW_IAP_PAGE_ERR (1 << 5)
#define ETP_FW_IAP_INTF_ERR (1 << 4)
#define ETP_FW_PAGE_SIZE 64
#define ETP_FW_PAGE_COUNT 768
#define ETP_FW_SIZE (ETP_FW_PAGE_SIZE * ETP_FW_PAGE_COUNT)
struct i2c_client;
struct completion;
enum tp_mode {
IAP_MODE = 1,
MAIN_MODE
};
struct elan_transport_ops {
int (*initialize)(struct i2c_client *client);
int (*sleep_control)(struct i2c_client *, bool sleep);
int (*power_control)(struct i2c_client *, bool enable);
int (*set_mode)(struct i2c_client *client, u8 mode);
int (*calibrate)(struct i2c_client *client);
int (*calibrate_result)(struct i2c_client *client, u8 *val);
int (*get_baseline_data)(struct i2c_client *client,
bool max_baseliune, u8 *value);
int (*get_version)(struct i2c_client *client, bool iap, u8 *version);
int (*get_sm_version)(struct i2c_client *client, u8 *version);
int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum);
int (*get_product_id)(struct i2c_client *client, u8 *id);
int (*get_max)(struct i2c_client *client,
unsigned int *max_x, unsigned int *max_y);
int (*get_resolution)(struct i2c_client *client,
u8 *hw_res_x, u8 *hw_res_y);
int (*get_num_traces)(struct i2c_client *client,
unsigned int *x_tracenum,
unsigned int *y_tracenum);
int (*iap_get_mode)(struct i2c_client *client, enum tp_mode *mode);
int (*iap_reset)(struct i2c_client *client);
int (*prepare_fw_update)(struct i2c_client *client);
int (*write_fw_block)(struct i2c_client *client,
const u8 *page, u16 checksum, int idx);
int (*finish_fw_update)(struct i2c_client *client,
struct completion *reset_done);
int (*get_report)(struct i2c_client *client, u8 *report);
};
extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops;
#endif /* _ELAN_I2C_H */

1137
drivers/input/mouse/elan_i2c_core.c Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

611
drivers/input/mouse/elan_i2c_i2c.c Normal file
Просмотреть файл

@ -0,0 +1,611 @@
/*
* Elan I2C/SMBus Touchpad driver - I2C interface
*
* Copyright (c) 2013 ELAN Microelectronics Corp.
*
* Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
* Version: 1.5.5
*
* Based on cyapa driver:
* copyright (c) 2011-2012 Cypress Semiconductor, Inc.
* copyright (c) 2011-2012 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Trademarks are the property of their respective owners.
*/
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <asm/unaligned.h>
#include "elan_i2c.h"
/* Elan i2c commands */
#define ETP_I2C_RESET 0x0100
#define ETP_I2C_WAKE_UP 0x0800
#define ETP_I2C_SLEEP 0x0801
#define ETP_I2C_DESC_CMD 0x0001
#define ETP_I2C_REPORT_DESC_CMD 0x0002
#define ETP_I2C_STAND_CMD 0x0005
#define ETP_I2C_UNIQUEID_CMD 0x0101
#define ETP_I2C_FW_VERSION_CMD 0x0102
#define ETP_I2C_SM_VERSION_CMD 0x0103
#define ETP_I2C_XY_TRACENUM_CMD 0x0105
#define ETP_I2C_MAX_X_AXIS_CMD 0x0106
#define ETP_I2C_MAX_Y_AXIS_CMD 0x0107
#define ETP_I2C_RESOLUTION_CMD 0x0108
#define ETP_I2C_IAP_VERSION_CMD 0x0110
#define ETP_I2C_SET_CMD 0x0300
#define ETP_I2C_POWER_CMD 0x0307
#define ETP_I2C_FW_CHECKSUM_CMD 0x030F
#define ETP_I2C_IAP_CTRL_CMD 0x0310
#define ETP_I2C_IAP_CMD 0x0311
#define ETP_I2C_IAP_RESET_CMD 0x0314
#define ETP_I2C_IAP_CHECKSUM_CMD 0x0315
#define ETP_I2C_CALIBRATE_CMD 0x0316
#define ETP_I2C_MAX_BASELINE_CMD 0x0317
#define ETP_I2C_MIN_BASELINE_CMD 0x0318
#define ETP_I2C_REPORT_LEN 34
#define ETP_I2C_DESC_LENGTH 30
#define ETP_I2C_REPORT_DESC_LENGTH 158
#define ETP_I2C_INF_LENGTH 2
#define ETP_I2C_IAP_PASSWORD 0x1EA5
#define ETP_I2C_IAP_RESET 0xF0F0
#define ETP_I2C_MAIN_MODE_ON (1 << 9)
#define ETP_I2C_IAP_REG_L 0x01
#define ETP_I2C_IAP_REG_H 0x06
static int elan_i2c_read_block(struct i2c_client *client,
u16 reg, u8 *val, u16 len)
{
__le16 buf[] = {
cpu_to_le16(reg),
};
struct i2c_msg msgs[] = {
{
.addr = client->addr,
.flags = client->flags & I2C_M_TEN,
.len = sizeof(buf),
.buf = (u8 *)buf,
},
{
.addr = client->addr,
.flags = (client->flags & I2C_M_TEN) | I2C_M_RD,
.len = len,
.buf = val,
}
};
int ret;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
return ret == ARRAY_SIZE(msgs) ? 0 : (ret < 0 ? ret : -EIO);
}
static int elan_i2c_read_cmd(struct i2c_client *client, u16 reg, u8 *val)
{
int retval;
retval = elan_i2c_read_block(client, reg, val, ETP_I2C_INF_LENGTH);
if (retval < 0) {
dev_err(&client->dev, "reading cmd (0x%04x) fail.\n", reg);
return retval;
}
return 0;
}
static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd)
{
__le16 buf[] = {
cpu_to_le16(reg),
cpu_to_le16(cmd),
};
struct i2c_msg msg = {
.addr = client->addr,
.flags = client->flags & I2C_M_TEN,
.len = sizeof(buf),
.buf = (u8 *)buf,
};
int ret;
ret = i2c_transfer(client->adapter, &msg, 1);
return ret == 1 ? 0 : (ret < 0 ? ret : -EIO);
}
static int elan_i2c_initialize(struct i2c_client *client)
{
struct device *dev = &client->dev;
int error;
u8 val[256];
error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET);
if (error) {
dev_err(dev, "device reset failed: %d\n", error);
return error;
}
/* Wait for the device to reset */
msleep(100);
/* get reset acknowledgement 0000 */
error = i2c_master_recv(client, val, ETP_I2C_INF_LENGTH);
if (error < 0) {
dev_err(dev, "failed to read reset response: %d\n", error);
return error;
}
error = elan_i2c_read_block(client, ETP_I2C_DESC_CMD,
val, ETP_I2C_DESC_LENGTH);
if (error) {
dev_err(dev, "cannot get device descriptor: %d\n", error);
return error;
}
error = elan_i2c_read_block(client, ETP_I2C_REPORT_DESC_CMD,
val, ETP_I2C_REPORT_DESC_LENGTH);
if (error) {
dev_err(dev, "fetching report descriptor failed.: %d\n", error);
return error;
}
return 0;
}
static int elan_i2c_sleep_control(struct i2c_client *client, bool sleep)
{
return elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD,
sleep ? ETP_I2C_SLEEP : ETP_I2C_WAKE_UP);
}
static int elan_i2c_power_control(struct i2c_client *client, bool enable)
{
u8 val[2];
u16 reg;
int error;
error = elan_i2c_read_cmd(client, ETP_I2C_POWER_CMD, val);
if (error) {
dev_err(&client->dev,
"failed to read current power state: %d\n",
error);
return error;
}
reg = le16_to_cpup((__le16 *)val);
if (enable)
reg &= ~ETP_DISABLE_POWER;
else
reg |= ETP_DISABLE_POWER;
error = elan_i2c_write_cmd(client, ETP_I2C_POWER_CMD, reg);
if (error) {
dev_err(&client->dev,
"failed to write current power state: %d\n",
error);
return error;
}
return 0;
}
static int elan_i2c_set_mode(struct i2c_client *client, u8 mode)
{
return elan_i2c_write_cmd(client, ETP_I2C_SET_CMD, mode);
}
static int elan_i2c_calibrate(struct i2c_client *client)
{
return elan_i2c_write_cmd(client, ETP_I2C_CALIBRATE_CMD, 1);
}
static int elan_i2c_calibrate_result(struct i2c_client *client, u8 *val)
{
return elan_i2c_read_block(client, ETP_I2C_CALIBRATE_CMD, val, 1);
}
static int elan_i2c_get_baseline_data(struct i2c_client *client,
bool max_baseline, u8 *value)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client,
max_baseline ? ETP_I2C_MAX_BASELINE_CMD :
ETP_I2C_MIN_BASELINE_CMD,
val);
if (error)
return error;
*value = le16_to_cpup((__le16 *)val);
return 0;
}
static int elan_i2c_get_version(struct i2c_client *client,
bool iap, u8 *version)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client,
iap ? ETP_I2C_IAP_VERSION_CMD :
ETP_I2C_FW_VERSION_CMD,
val);
if (error) {
dev_err(&client->dev, "failed to get %s version: %d\n",
iap ? "IAP" : "FW", error);
return error;
}
*version = val[0];
return 0;
}
static int elan_i2c_get_sm_version(struct i2c_client *client, u8 *version)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client, ETP_I2C_SM_VERSION_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get SM version: %d\n", error);
return error;
}
*version = val[0];
return 0;
}
static int elan_i2c_get_product_id(struct i2c_client *client, u8 *id)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client, ETP_I2C_UNIQUEID_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get product ID: %d\n", error);
return error;
}
*id = val[0];
return 0;
}
static int elan_i2c_get_checksum(struct i2c_client *client,
bool iap, u16 *csum)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client,
iap ? ETP_I2C_IAP_CHECKSUM_CMD :
ETP_I2C_FW_CHECKSUM_CMD,
val);
if (error) {
dev_err(&client->dev, "failed to get %s checksum: %d\n",
iap ? "IAP" : "FW", error);
return error;
}
*csum = le16_to_cpup((__le16 *)val);
return 0;
}
static int elan_i2c_get_max(struct i2c_client *client,
unsigned int *max_x, unsigned int *max_y)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client, ETP_I2C_MAX_X_AXIS_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get X dimension: %d\n", error);
return error;
}
*max_x = le16_to_cpup((__le16 *)val) & 0x0fff;
error = elan_i2c_read_cmd(client, ETP_I2C_MAX_Y_AXIS_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get Y dimension: %d\n", error);
return error;
}
*max_y = le16_to_cpup((__le16 *)val) & 0x0fff;
return 0;
}
static int elan_i2c_get_resolution(struct i2c_client *client,
u8 *hw_res_x, u8 *hw_res_y)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client, ETP_I2C_RESOLUTION_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get resolution: %d\n", error);
return error;
}
*hw_res_x = val[0];
*hw_res_y = val[1];
return 0;
}
static int elan_i2c_get_num_traces(struct i2c_client *client,
unsigned int *x_traces,
unsigned int *y_traces)
{
int error;
u8 val[3];
error = elan_i2c_read_cmd(client, ETP_I2C_XY_TRACENUM_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get trace info: %d\n", error);
return error;
}
*x_traces = val[0] - 1;
*y_traces = val[1] - 1;
return 0;
}
static int elan_i2c_iap_get_mode(struct i2c_client *client, enum tp_mode *mode)
{
int error;
u16 constant;
u8 val[3];
error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val);
if (error) {
dev_err(&client->dev,
"failed to read iap control register: %d\n",
error);
return error;
}
constant = le16_to_cpup((__le16 *)val);
dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant);
*mode = (constant & ETP_I2C_MAIN_MODE_ON) ? MAIN_MODE : IAP_MODE;
return 0;
}
static int elan_i2c_iap_reset(struct i2c_client *client)
{
int error;
error = elan_i2c_write_cmd(client, ETP_I2C_IAP_RESET_CMD,
ETP_I2C_IAP_RESET);
if (error) {
dev_err(&client->dev, "cannot reset IC: %d\n", error);
return error;
}
return 0;
}
static int elan_i2c_set_flash_key(struct i2c_client *client)
{
int error;
error = elan_i2c_write_cmd(client, ETP_I2C_IAP_CMD,
ETP_I2C_IAP_PASSWORD);
if (error) {
dev_err(&client->dev, "cannot set flash key: %d\n", error);
return error;
}
return 0;
}
static int elan_i2c_prepare_fw_update(struct i2c_client *client)
{
struct device *dev = &client->dev;
int error;
enum tp_mode mode;
u8 val[3];
u16 password;
/* Get FW in which mode (IAP_MODE/MAIN_MODE) */
error = elan_i2c_iap_get_mode(client, &mode);
if (error)
return error;
if (mode == IAP_MODE) {
/* Reset IC */
error = elan_i2c_iap_reset(client);
if (error)
return error;
msleep(30);
}
/* Set flash key*/
error = elan_i2c_set_flash_key(client);
if (error)
return error;
/* Wait for F/W IAP initialization */
msleep(mode == MAIN_MODE ? 100 : 30);
/* Check if we are in IAP mode or not */
error = elan_i2c_iap_get_mode(client, &mode);
if (error)
return error;
if (mode == MAIN_MODE) {
dev_err(dev, "wrong mode: %d\n", mode);
return -EIO;
}
/* Set flash key again */
error = elan_i2c_set_flash_key(client);
if (error)
return error;
/* Wait for F/W IAP initialization */
msleep(30);
/* read back to check we actually enabled successfully. */
error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CMD, val);
if (error) {
dev_err(dev, "cannot read iap password: %d\n",
error);
return error;
}
password = le16_to_cpup((__le16 *)val);
if (password != ETP_I2C_IAP_PASSWORD) {
dev_err(dev, "wrong iap password: 0x%X\n", password);
return -EIO;
}
return 0;
}
static int elan_i2c_write_fw_block(struct i2c_client *client,
const u8 *page, u16 checksum, int idx)
{
struct device *dev = &client->dev;
u8 page_store[ETP_FW_PAGE_SIZE + 4];
u8 val[3];
u16 result;
int ret, error;
page_store[0] = ETP_I2C_IAP_REG_L;
page_store[1] = ETP_I2C_IAP_REG_H;
memcpy(&page_store[2], page, ETP_FW_PAGE_SIZE);
/* recode checksum at last two bytes */
put_unaligned_le16(checksum, &page_store[ETP_FW_PAGE_SIZE + 2]);
ret = i2c_master_send(client, page_store, sizeof(page_store));
if (ret != sizeof(page_store)) {
error = ret < 0 ? ret : -EIO;
dev_err(dev, "Failed to write page %d: %d\n", idx, error);
return error;
}
/* Wait for F/W to update one page ROM data. */
msleep(20);
error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val);
if (error) {
dev_err(dev, "Failed to read IAP write result: %d\n", error);
return error;
}
result = le16_to_cpup((__le16 *)val);
if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) {
dev_err(dev, "IAP reports failed write: %04hx\n",
result);
return -EIO;
}
return 0;
}
static int elan_i2c_finish_fw_update(struct i2c_client *client,
struct completion *completion)
{
struct device *dev = &client->dev;
long ret;
int error;
int len;
u8 buffer[ETP_I2C_INF_LENGTH];
reinit_completion(completion);
enable_irq(client->irq);
error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET);
if (!error)
ret = wait_for_completion_interruptible_timeout(completion,
msecs_to_jiffies(300));
disable_irq(client->irq);
if (error) {
dev_err(dev, "device reset failed: %d\n", error);
return error;
} else if (ret == 0) {
dev_err(dev, "timeout waiting for device reset\n");
return -ETIMEDOUT;
} else if (ret < 0) {
error = ret;
dev_err(dev, "error waiting for device reset: %d\n", error);
return error;
}
len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH);
if (len != ETP_I2C_INF_LENGTH) {
error = len < 0 ? len : -EIO;
dev_err(dev, "failed to read INT signal: %d (%d)\n",
error, len);
return error;
}
return 0;
}
static int elan_i2c_get_report(struct i2c_client *client, u8 *report)
{
int len;
len = i2c_master_recv(client, report, ETP_I2C_REPORT_LEN);
if (len < 0) {
dev_err(&client->dev, "failed to read report data: %d\n", len);
return len;
}
if (len != ETP_I2C_REPORT_LEN) {
dev_err(&client->dev,
"wrong report length (%d vs %d expected)\n",
len, ETP_I2C_REPORT_LEN);
return -EIO;
}
return 0;
}
const struct elan_transport_ops elan_i2c_ops = {
.initialize = elan_i2c_initialize,
.sleep_control = elan_i2c_sleep_control,
.power_control = elan_i2c_power_control,
.set_mode = elan_i2c_set_mode,
.calibrate = elan_i2c_calibrate,
.calibrate_result = elan_i2c_calibrate_result,
.get_baseline_data = elan_i2c_get_baseline_data,
.get_version = elan_i2c_get_version,
.get_sm_version = elan_i2c_get_sm_version,
.get_product_id = elan_i2c_get_product_id,
.get_checksum = elan_i2c_get_checksum,
.get_max = elan_i2c_get_max,
.get_resolution = elan_i2c_get_resolution,
.get_num_traces = elan_i2c_get_num_traces,
.iap_get_mode = elan_i2c_iap_get_mode,
.iap_reset = elan_i2c_iap_reset,
.prepare_fw_update = elan_i2c_prepare_fw_update,
.write_fw_block = elan_i2c_write_fw_block,
.finish_fw_update = elan_i2c_finish_fw_update,
.get_report = elan_i2c_get_report,
};

514
drivers/input/mouse/elan_i2c_smbus.c Normal file
Просмотреть файл

@ -0,0 +1,514 @@
/*
* Elan I2C/SMBus Touchpad driver - SMBus interface
*
* Copyright (c) 2013 ELAN Microelectronics Corp.
*
* Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
* Version: 1.5.5
*
* Based on cyapa driver:
* copyright (c) 2011-2012 Cypress Semiconductor, Inc.
* copyright (c) 2011-2012 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Trademarks are the property of their respective owners.
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include "elan_i2c.h"
/* Elan SMbus commands */
#define ETP_SMBUS_IAP_CMD 0x00
#define ETP_SMBUS_ENABLE_TP 0x20
#define ETP_SMBUS_SLEEP_CMD 0x21
#define ETP_SMBUS_IAP_PASSWORD_WRITE 0x29
#define ETP_SMBUS_IAP_PASSWORD_READ 0x80
#define ETP_SMBUS_WRITE_FW_BLOCK 0x2A
#define ETP_SMBUS_IAP_RESET_CMD 0x2B
#define ETP_SMBUS_RANGE_CMD 0xA0
#define ETP_SMBUS_FW_VERSION_CMD 0xA1
#define ETP_SMBUS_XY_TRACENUM_CMD 0xA2
#define ETP_SMBUS_SM_VERSION_CMD 0xA3
#define ETP_SMBUS_UNIQUEID_CMD 0xA3
#define ETP_SMBUS_RESOLUTION_CMD 0xA4
#define ETP_SMBUS_HELLOPACKET_CMD 0xA7
#define ETP_SMBUS_PACKET_QUERY 0xA8
#define ETP_SMBUS_IAP_VERSION_CMD 0xAC
#define ETP_SMBUS_IAP_CTRL_CMD 0xAD
#define ETP_SMBUS_IAP_CHECKSUM_CMD 0xAE
#define ETP_SMBUS_FW_CHECKSUM_CMD 0xAF
#define ETP_SMBUS_MAX_BASELINE_CMD 0xC3
#define ETP_SMBUS_MIN_BASELINE_CMD 0xC4
#define ETP_SMBUS_CALIBRATE_QUERY 0xC5
#define ETP_SMBUS_REPORT_LEN 32
#define ETP_SMBUS_REPORT_OFFSET 2
#define ETP_SMBUS_HELLOPACKET_LEN 5
#define ETP_SMBUS_IAP_PASSWORD 0x1234
#define ETP_SMBUS_IAP_MODE_ON (1 << 6)
static int elan_smbus_initialize(struct i2c_client *client)
{
u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 };
u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 };
int len, error;
/* Get hello packet */
len = i2c_smbus_read_block_data(client,
ETP_SMBUS_HELLOPACKET_CMD, values);
if (len != ETP_SMBUS_HELLOPACKET_LEN) {
dev_err(&client->dev, "hello packet length fail: %d\n", len);
error = len < 0 ? len : -EIO;
return error;
}
/* compare hello packet */
if (memcmp(values, check, ETP_SMBUS_HELLOPACKET_LEN)) {
dev_err(&client->dev, "hello packet fail [%*px]\n",
ETP_SMBUS_HELLOPACKET_LEN, values);
return -ENXIO;
}
/* enable tp */
error = i2c_smbus_write_byte(client, ETP_SMBUS_ENABLE_TP);
if (error) {
dev_err(&client->dev, "failed to enable touchpad: %d\n", error);
return error;
}
return 0;
}
static int elan_smbus_set_mode(struct i2c_client *client, u8 mode)
{
u8 cmd[4] = { 0x00, 0x07, 0x00, mode };
return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD,
sizeof(cmd), cmd);
}
static int elan_smbus_sleep_control(struct i2c_client *client, bool sleep)
{
if (sleep)
return i2c_smbus_write_byte(client, ETP_SMBUS_SLEEP_CMD);
else
return 0; /* XXX should we send ETP_SMBUS_ENABLE_TP here? */
}
static int elan_smbus_power_control(struct i2c_client *client, bool enable)
{
return 0; /* A no-op */
}
static int elan_smbus_calibrate(struct i2c_client *client)
{
u8 cmd[4] = { 0x00, 0x08, 0x00, 0x01 };
return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD,
sizeof(cmd), cmd);
}
static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val)
{
int error;
error = i2c_smbus_read_block_data(client,
ETP_SMBUS_CALIBRATE_QUERY, val);
if (error < 0)
return error;
return 0;
}
static int elan_smbus_get_baseline_data(struct i2c_client *client,
bool max_baseline, u8 *value)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
max_baseline ?
ETP_SMBUS_MAX_BASELINE_CMD :
ETP_SMBUS_MIN_BASELINE_CMD,
val);
if (error < 0)
return error;
*value = be16_to_cpup((__be16 *)val);
return 0;
}
static int elan_smbus_get_version(struct i2c_client *client,
bool iap, u8 *version)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
iap ? ETP_SMBUS_IAP_VERSION_CMD :
ETP_SMBUS_FW_VERSION_CMD,
val);
if (error < 0) {
dev_err(&client->dev, "failed to get %s version: %d\n",
iap ? "IAP" : "FW", error);
return error;
}
*version = val[2];
return 0;
}
static int elan_smbus_get_sm_version(struct i2c_client *client, u8 *version)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
ETP_SMBUS_SM_VERSION_CMD, val);
if (error < 0) {
dev_err(&client->dev, "failed to get SM version: %d\n", error);
return error;
}
*version = val[0]; /* XXX Why 0 and not 2 as in IAP/FW versions? */
return 0;
}
static int elan_smbus_get_product_id(struct i2c_client *client, u8 *id)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
ETP_SMBUS_UNIQUEID_CMD, val);
if (error < 0) {
dev_err(&client->dev, "failed to get product ID: %d\n", error);
return error;
}
*id = val[1];
return 0;
}
static int elan_smbus_get_checksum(struct i2c_client *client,
bool iap, u16 *csum)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
iap ? ETP_SMBUS_FW_CHECKSUM_CMD :
ETP_SMBUS_IAP_CHECKSUM_CMD,
val);
if (error < 0) {
dev_err(&client->dev, "failed to get %s checksum: %d\n",
iap ? "IAP" : "FW", error);
return error;
}
*csum = be16_to_cpup((__be16 *)val);
return 0;
}
static int elan_smbus_get_max(struct i2c_client *client,
unsigned int *max_x, unsigned int *max_y)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get dimensions: %d\n", error);
return error;
}
*max_x = (0x0f & val[0]) << 8 | val[1];
*max_y = (0xf0 & val[0]) << 4 | val[2];
return 0;
}
static int elan_smbus_get_resolution(struct i2c_client *client,
u8 *hw_res_x, u8 *hw_res_y)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
ETP_SMBUS_RESOLUTION_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get resolution: %d\n", error);
return error;
}
*hw_res_x = val[1] & 0x0F;
*hw_res_y = (val[1] & 0xF0) >> 4;
return 0;
}
static int elan_smbus_get_num_traces(struct i2c_client *client,
unsigned int *x_traces,
unsigned int *y_traces)
{
int error;
u8 val[3];
error = i2c_smbus_read_block_data(client,
ETP_SMBUS_XY_TRACENUM_CMD, val);
if (error) {
dev_err(&client->dev, "failed to get trace info: %d\n", error);
return error;
}
*x_traces = val[1] - 1;
*y_traces = val[2] - 1;
return 0;
}
static int elan_smbus_iap_get_mode(struct i2c_client *client,
enum tp_mode *mode)
{
int error;
u16 constant;
u8 val[3];
error = i2c_smbus_read_block_data(client, ETP_SMBUS_IAP_CTRL_CMD, val);
if (error < 0) {
dev_err(&client->dev, "failed to read iap ctrol register: %d\n",
error);
return error;
}
constant = be16_to_cpup((__be16 *)val);
dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant);
*mode = (constant & ETP_SMBUS_IAP_MODE_ON) ? IAP_MODE : MAIN_MODE;
return 0;
}
static int elan_smbus_iap_reset(struct i2c_client *client)
{
int error;
error = i2c_smbus_write_byte(client, ETP_SMBUS_IAP_RESET_CMD);
if (error) {
dev_err(&client->dev, "cannot reset IC: %d\n", error);
return error;
}
return 0;
}
static int elan_smbus_set_flash_key(struct i2c_client *client)
{
int error;
u8 cmd[4] = { 0x00, 0x0B, 0x00, 0x5A };
error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD,
sizeof(cmd), cmd);
if (error) {
dev_err(&client->dev, "cannot set flash key: %d\n", error);
return error;
}
return 0;
}
static int elan_smbus_prepare_fw_update(struct i2c_client *client)
{
struct device *dev = &client->dev;
int len;
int error;
enum tp_mode mode;
u8 val[3];
u8 cmd[4] = {0x0F, 0x78, 0x00, 0x06};
u16 password;
/* Get FW in which mode (IAP_MODE/MAIN_MODE) */
error = elan_smbus_iap_get_mode(client, &mode);
if (error)
return error;
if (mode == MAIN_MODE) {
/* set flash key */
error = elan_smbus_set_flash_key(client);
if (error)
return error;
/* write iap password */
if (i2c_smbus_write_byte(client,
ETP_SMBUS_IAP_PASSWORD_WRITE) < 0) {
dev_err(dev, "cannot write iap password\n");
return -EIO;
}
error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD,
sizeof(cmd), cmd);
if (error) {
dev_err(dev, "failed to write iap password: %d\n",
error);
return error;
}
/*
* Read back password to make sure we enabled flash
* successfully.
*/
len = i2c_smbus_read_block_data(client,
ETP_SMBUS_IAP_PASSWORD_READ,
val);
if (len < sizeof(u16)) {
error = len < 0 ? len : -EIO;
dev_err(dev, "failed to read iap password: %d\n",
error);
return error;
}
password = be16_to_cpup((__be16 *)val);
if (password != ETP_SMBUS_IAP_PASSWORD) {
dev_err(dev, "wrong iap password = 0x%X\n", password);
return -EIO;
}
/* Wait 30ms for MAIN_MODE change to IAP_MODE */
msleep(30);
}
error = elan_smbus_set_flash_key(client);
if (error)
return error;
/* Reset IC */
error = elan_smbus_iap_reset(client);
if (error)
return error;
return 0;
}
static int elan_smbus_write_fw_block(struct i2c_client *client,
const u8 *page, u16 checksum, int idx)
{
struct device *dev = &client->dev;
int error;
u16 result;
u8 val[3];
/*
* Due to the limitation of smbus protocol limiting
* transfer to 32 bytes at a time, we must split block
* in 2 transfers.
*/
error = i2c_smbus_write_block_data(client,
ETP_SMBUS_WRITE_FW_BLOCK,
ETP_FW_PAGE_SIZE / 2,
page);
if (error) {
dev_err(dev, "Failed to write page %d (part %d): %d\n",
idx, 1, error);
return error;
}
error = i2c_smbus_write_block_data(client,
ETP_SMBUS_WRITE_FW_BLOCK,
ETP_FW_PAGE_SIZE / 2,
page + ETP_FW_PAGE_SIZE / 2);
if (error) {
dev_err(dev, "Failed to write page %d (part %d): %d\n",
idx, 2, error);
return error;
}
/* Wait for F/W to update one page ROM data. */
usleep_range(8000, 10000);
error = i2c_smbus_read_block_data(client,
ETP_SMBUS_IAP_CTRL_CMD, val);
if (error < 0) {
dev_err(dev, "Failed to read IAP write result: %d\n",
error);
return error;
}
result = be16_to_cpup((__be16 *)val);
if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) {
dev_err(dev, "IAP reports failed write: %04hx\n",
result);
return -EIO;
}
return 0;
}
static int elan_smbus_get_report(struct i2c_client *client, u8 *report)
{
int len;
len = i2c_smbus_read_block_data(client,
ETP_SMBUS_PACKET_QUERY,
&report[ETP_SMBUS_REPORT_OFFSET]);
if (len < 0) {
dev_err(&client->dev, "failed to read report data: %d\n", len);
return len;
}
if (len != ETP_SMBUS_REPORT_LEN) {
dev_err(&client->dev,
"wrong report length (%d vs %d expected)\n",
len, ETP_SMBUS_REPORT_LEN);
return -EIO;
}
return 0;
}
static int elan_smbus_finish_fw_update(struct i2c_client *client,
struct completion *fw_completion)
{
/* No special handling unlike I2C transport */
return 0;
}
const struct elan_transport_ops elan_smbus_ops = {
.initialize = elan_smbus_initialize,
.sleep_control = elan_smbus_sleep_control,
.power_control = elan_smbus_power_control,
.set_mode = elan_smbus_set_mode,
.calibrate = elan_smbus_calibrate,
.calibrate_result = elan_smbus_calibrate_result,
.get_baseline_data = elan_smbus_get_baseline_data,
.get_version = elan_smbus_get_version,
.get_sm_version = elan_smbus_get_sm_version,
.get_product_id = elan_smbus_get_product_id,
.get_checksum = elan_smbus_get_checksum,
.get_max = elan_smbus_get_max,
.get_resolution = elan_smbus_get_resolution,
.get_num_traces = elan_smbus_get_num_traces,
.iap_get_mode = elan_smbus_iap_get_mode,
.iap_reset = elan_smbus_iap_reset,
.prepare_fw_update = elan_smbus_prepare_fw_update,
.write_fw_block = elan_smbus_write_fw_block,
.finish_fw_update = elan_smbus_finish_fw_update,
.get_report = elan_smbus_get_report,
};

6
drivers/input/mouse/lifebook.h
Просмотреть файл

@ -16,14 +16,14 @@ void lifebook_module_init(void);
int lifebook_detect(struct psmouse *psmouse, bool set_properties);
int lifebook_init(struct psmouse *psmouse);
#else
inline void lifebook_module_init(void)
static inline void lifebook_module_init(void)
{
}
inline int lifebook_detect(struct psmouse *psmouse, bool set_properties)
static inline int lifebook_detect(struct psmouse *psmouse, bool set_properties)
{
return -ENOSYS;
}
inline int lifebook_init(struct psmouse *psmouse)
static inline int lifebook_init(struct psmouse *psmouse)
{
return -ENOSYS;
}

6
drivers/input/mouse/navpoint.c
Просмотреть файл

@ -318,8 +318,7 @@ static int navpoint_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int navpoint_suspend(struct device *dev)
static int __maybe_unused navpoint_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct navpoint *navpoint = platform_get_drvdata(pdev);
@ -333,7 +332,7 @@ static int navpoint_suspend(struct device *dev)
return 0;
}
static int navpoint_resume(struct device *dev)
static int __maybe_unused navpoint_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct navpoint *navpoint = platform_get_drvdata(pdev);
@ -346,7 +345,6 @@ static int navpoint_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume);

6
drivers/input/mouse/synaptics_i2c.c
Просмотреть файл

@ -614,8 +614,7 @@ static int synaptics_i2c_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int synaptics_i2c_suspend(struct device *dev)
static int __maybe_unused synaptics_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct synaptics_i2c *touch = i2c_get_clientdata(client);
@ -628,7 +627,7 @@ static int synaptics_i2c_suspend(struct device *dev)
return 0;
}
static int synaptics_i2c_resume(struct device *dev)
static int __maybe_unused synaptics_i2c_resume(struct device *dev)
{
int ret;
struct i2c_client *client = to_i2c_client(dev);
@ -643,7 +642,6 @@ static int synaptics_i2c_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend,
synaptics_i2c_resume);

81
drivers/input/serio/altera_ps2.c
Просмотреть файл

@ -24,9 +24,7 @@
struct ps2if {
struct serio *io;
struct resource *iomem_res;
void __iomem *base;
unsigned irq;
};
/*
@ -83,16 +81,34 @@ static void altera_ps2_close(struct serio *io)
static int altera_ps2_probe(struct platform_device *pdev)
{
struct ps2if *ps2if;
struct resource *res;
struct serio *serio;
int error, irq;
ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL);
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!ps2if || !serio) {
error = -ENOMEM;
goto err_free_mem;
ps2if = devm_kzalloc(&pdev->dev, sizeof(struct ps2if), GFP_KERNEL);
if (!ps2if)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ps2if->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ps2if->base))
return PTR_ERR(ps2if->base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -ENXIO;
error = devm_request_irq(&pdev->dev, irq, altera_ps2_rxint, 0,
pdev->name, ps2if);
if (error) {
dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
return error;
}
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!serio)
return -ENOMEM;
serio->id.type = SERIO_8042;
serio->write = altera_ps2_write;
serio->open = altera_ps2_open;
@ -103,56 +119,12 @@ static int altera_ps2_probe(struct platform_device *pdev)
serio->dev.parent = &pdev->dev;
ps2if->io = serio;
ps2if->iomem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (ps2if->iomem_res == NULL) {
error = -ENOENT;
goto err_free_mem;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
error = -ENXIO;
goto err_free_mem;
}
ps2if->irq = irq;
if (!request_mem_region(ps2if->iomem_res->start,
resource_size(ps2if->iomem_res), pdev->name)) {
error = -EBUSY;
goto err_free_mem;
}
ps2if->base = ioremap(ps2if->iomem_res->start,
resource_size(ps2if->iomem_res));
if (!ps2if->base) {
error = -ENOMEM;
goto err_free_res;
}
error = request_irq(ps2if->irq, altera_ps2_rxint, 0, pdev->name, ps2if);
if (error) {
dev_err(&pdev->dev, "could not allocate IRQ %d: %d\n",
ps2if->irq, error);
goto err_unmap;
}
dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, ps2if->irq);
dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, irq);
serio_register_port(ps2if->io);
platform_set_drvdata(pdev, ps2if);
return 0;
err_unmap:
iounmap(ps2if->base);
err_free_res:
release_mem_region(ps2if->iomem_res->start,
resource_size(ps2if->iomem_res));
err_free_mem:
kfree(ps2if);
kfree(serio);
return error;
}
/*
@ -163,11 +135,6 @@ static int altera_ps2_remove(struct platform_device *pdev)
struct ps2if *ps2if = platform_get_drvdata(pdev);
serio_unregister_port(ps2if->io);
free_irq(ps2if->irq, ps2if);
iounmap(ps2if->base);
release_mem_region(ps2if->iomem_res->start,
resource_size(ps2if->iomem_res));
kfree(ps2if);
return 0;
}

10
drivers/input/serio/i8042-x86ia64io.h
Просмотреть файл

@ -578,6 +578,16 @@ static const struct dmi_system_id __initconst i8042_dmi_nopnp_table[] = {
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
},
},
{
/*
* Intel NUC D54250WYK - does not have i8042 controller but
* declares PS/2 devices in DSDT.
*/
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "D54250WYK"),
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
},
},
{
/* MSI Wind U-100 */
.matches = {

4
drivers/input/serio/serio.c
Просмотреть файл

@ -514,7 +514,7 @@ static void serio_release_port(struct device *dev)
*/
static void serio_init_port(struct serio *serio)
{
static atomic_t serio_no = ATOMIC_INIT(0);
static atomic_t serio_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
@ -525,7 +525,7 @@ static void serio_init_port(struct serio *serio)
mutex_init(&serio->drv_mutex);
device_initialize(&serio->dev);
dev_set_name(&serio->dev, "serio%lu",
(unsigned long)atomic_inc_return(&serio_no) - 1);
(unsigned long)atomic_inc_return(&serio_no));
serio->dev.bus = &serio_bus;
serio->dev.release = serio_release_port;
serio->dev.groups = serio_device_attr_groups;

4
drivers/input/serio/serio_raw.c
Просмотреть файл

@ -292,7 +292,7 @@ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
{
static atomic_t serio_raw_no = ATOMIC_INIT(0);
static atomic_t serio_raw_no = ATOMIC_INIT(-1);
struct serio_raw *serio_raw;
int err;
@ -303,7 +303,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
}
snprintf(serio_raw->name, sizeof(serio_raw->name),
"serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1);
"serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
kref_init(&serio_raw->kref);
INIT_LIST_HEAD(&serio_raw->client_list);
init_waitqueue_head(&serio_raw->wait);

25
drivers/input/touchscreen/Kconfig
Просмотреть файл

@ -295,6 +295,19 @@ config TOUCHSCREEN_FUJITSU
To compile this driver as a module, choose M here: the
module will be called fujitsu-ts.
config TOUCHSCREEN_GOODIX
tristate "Goodix I2C touchscreen"
depends on I2C && ACPI
help
Say Y here if you have the Goodix touchscreen (such as one
installed in Onda v975w tablets) connected to your
system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called goodix.
config TOUCHSCREEN_ILI210X
tristate "Ilitek ILI210X based touchscreen"
depends on I2C
@ -334,6 +347,18 @@ config TOUCHSCREEN_GUNZE
To compile this driver as a module, choose M here: the
module will be called gunze.
config TOUCHSCREEN_ELAN
tristate "Elan eKTH I2C touchscreen"
depends on I2C
help
Say Y here if you have an Elan eKTH I2C touchscreen
connected to your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called elants_i2c.
config TOUCHSCREEN_ELO
tristate "Elo serial touchscreens"
select SERIO

2
drivers/input/touchscreen/Makefile
Просмотреть файл

@ -31,9 +31,11 @@ obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o
obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o

6
drivers/input/touchscreen/ad7877.c
Просмотреть файл

@ -820,8 +820,7 @@ static int ad7877_remove(struct spi_device *spi)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int ad7877_suspend(struct device *dev)
static int __maybe_unused ad7877_suspend(struct device *dev)
{
struct ad7877 *ts = dev_get_drvdata(dev);
@ -830,7 +829,7 @@ static int ad7877_suspend(struct device *dev)
return 0;
}
static int ad7877_resume(struct device *dev)
static int __maybe_unused ad7877_resume(struct device *dev)
{
struct ad7877 *ts = dev_get_drvdata(dev);
@ -838,7 +837,6 @@ static int ad7877_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume);

6
drivers/input/touchscreen/ad7879.c
Просмотреть файл

@ -284,8 +284,7 @@ static void ad7879_close(struct input_dev* input)
__ad7879_disable(ts);
}
#ifdef CONFIG_PM_SLEEP
static int ad7879_suspend(struct device *dev)
static int __maybe_unused ad7879_suspend(struct device *dev)
{
struct ad7879 *ts = dev_get_drvdata(dev);
@ -301,7 +300,7 @@ static int ad7879_suspend(struct device *dev)
return 0;
}
static int ad7879_resume(struct device *dev)
static int __maybe_unused ad7879_resume(struct device *dev)
{
struct ad7879 *ts = dev_get_drvdata(dev);
@ -316,7 +315,6 @@ static int ad7879_resume(struct device *dev)
return 0;
}
#endif
SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume);
EXPORT_SYMBOL(ad7879_pm_ops);

6
drivers/input/touchscreen/ads7846.c
Просмотреть файл

@ -883,8 +883,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
return IRQ_HANDLED;
}
#ifdef CONFIG_PM_SLEEP
static int ads7846_suspend(struct device *dev)
static int __maybe_unused ads7846_suspend(struct device *dev)
{
struct ads7846 *ts = dev_get_drvdata(dev);
@ -906,7 +905,7 @@ static int ads7846_suspend(struct device *dev)
return 0;
}
static int ads7846_resume(struct device *dev)
static int __maybe_unused ads7846_resume(struct device *dev)
{
struct ads7846 *ts = dev_get_drvdata(dev);
@ -927,7 +926,6 @@ static int ads7846_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);

6
drivers/input/touchscreen/atmel_mxt_ts.c
Просмотреть файл

@ -2244,8 +2244,7 @@ static int mxt_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mxt_suspend(struct device *dev)
static int __maybe_unused mxt_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mxt_data *data = i2c_get_clientdata(client);
@ -2261,7 +2260,7 @@ static int mxt_suspend(struct device *dev)
return 0;
}
static int mxt_resume(struct device *dev)
static int __maybe_unused mxt_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mxt_data *data = i2c_get_clientdata(client);
@ -2276,7 +2275,6 @@ static int mxt_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);

6
drivers/input/touchscreen/auo-pixcir-ts.c
Просмотреть файл

@ -417,8 +417,7 @@ static void auo_pixcir_input_close(struct input_dev *dev)
return;
}
#ifdef CONFIG_PM_SLEEP
static int auo_pixcir_suspend(struct device *dev)
static int __maybe_unused auo_pixcir_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
@ -450,7 +449,7 @@ unlock:
return ret;
}
static int auo_pixcir_resume(struct device *dev)
static int __maybe_unused auo_pixcir_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
@ -479,7 +478,6 @@ unlock:
return ret;
}
#endif
static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops,
auo_pixcir_suspend, auo_pixcir_resume);

6
drivers/input/touchscreen/cy8ctmg110_ts.c
Просмотреть файл

@ -291,8 +291,7 @@ err_free_mem:
return err;
}
#ifdef CONFIG_PM_SLEEP
static int cy8ctmg110_suspend(struct device *dev)
static int __maybe_unused cy8ctmg110_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct cy8ctmg110 *ts = i2c_get_clientdata(client);
@ -306,7 +305,7 @@ static int cy8ctmg110_suspend(struct device *dev)
return 0;
}
static int cy8ctmg110_resume(struct device *dev)
static int __maybe_unused cy8ctmg110_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct cy8ctmg110 *ts = i2c_get_clientdata(client);
@ -319,7 +318,6 @@ static int cy8ctmg110_resume(struct device *dev)
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume);

7
drivers/input/touchscreen/cyttsp_core.c
Просмотреть файл

@ -472,8 +472,7 @@ static int cyttsp_disable(struct cyttsp *ts)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int cyttsp_suspend(struct device *dev)
static int __maybe_unused cyttsp_suspend(struct device *dev)
{
struct cyttsp *ts = dev_get_drvdata(dev);
int retval = 0;
@ -491,7 +490,7 @@ static int cyttsp_suspend(struct device *dev)
return retval;
}
static int cyttsp_resume(struct device *dev)
static int __maybe_unused cyttsp_resume(struct device *dev)
{
struct cyttsp *ts = dev_get_drvdata(dev);
@ -507,8 +506,6 @@ static int cyttsp_resume(struct device *dev)
return 0;
}
#endif
SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
EXPORT_SYMBOL_GPL(cyttsp_pm_ops);

6
drivers/input/touchscreen/edt-ft5x06.c
Просмотреть файл

@ -1092,8 +1092,7 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int edt_ft5x06_ts_suspend(struct device *dev)
static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -1103,7 +1102,7 @@ static int edt_ft5x06_ts_suspend(struct device *dev)
return 0;
}
static int edt_ft5x06_ts_resume(struct device *dev)
static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -1112,7 +1111,6 @@ static int edt_ft5x06_ts_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);

6
drivers/input/touchscreen/eeti_ts.c
Просмотреть файл

@ -264,8 +264,7 @@ static int eeti_ts_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int eeti_ts_suspend(struct device *dev)
static int __maybe_unused eeti_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
@ -284,7 +283,7 @@ static int eeti_ts_suspend(struct device *dev)
return 0;
}
static int eeti_ts_resume(struct device *dev)
static int __maybe_unused eeti_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
@ -302,7 +301,6 @@ static int eeti_ts_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume);

6
drivers/input/touchscreen/egalax_ts.c
Просмотреть файл

@ -239,8 +239,7 @@ static const struct i2c_device_id egalax_ts_id[] = {
};
MODULE_DEVICE_TABLE(i2c, egalax_ts_id);
#ifdef CONFIG_PM_SLEEP
static int egalax_ts_suspend(struct device *dev)
static int __maybe_unused egalax_ts_suspend(struct device *dev)
{
static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = {
0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0
@ -252,13 +251,12 @@ static int egalax_ts_suspend(struct device *dev)
return ret > 0 ? 0 : ret;
}
static int egalax_ts_resume(struct device *dev)
static int __maybe_unused egalax_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
return egalax_wake_up_device(client);
}
#endif
static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);

1271
drivers/input/touchscreen/elants_i2c.c Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

395
drivers/input/touchscreen/goodix.c Normal file
Просмотреть файл

@ -0,0 +1,395 @@
/*
* Driver for Goodix Touchscreens
*
* Copyright (c) 2014 Red Hat Inc.
*
* This code is based on gt9xx.c authored by andrew@goodix.com:
*
* 2010 - 2012 Goodix Technology.
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; version 2 of the License.
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
struct goodix_ts_data {
struct i2c_client *client;
struct input_dev *input_dev;
int abs_x_max;
int abs_y_max;
unsigned int max_touch_num;
unsigned int int_trigger_type;
};
#define GOODIX_MAX_HEIGHT 4096
#define GOODIX_MAX_WIDTH 4096
#define GOODIX_INT_TRIGGER 1
#define GOODIX_CONTACT_SIZE 8
#define GOODIX_MAX_CONTACTS 10
#define GOODIX_CONFIG_MAX_LENGTH 240
/* Register defines */
#define GOODIX_READ_COOR_ADDR 0x814E
#define GOODIX_REG_CONFIG_DATA 0x8047
#define GOODIX_REG_VERSION 0x8140
#define RESOLUTION_LOC 1
#define TRIGGER_LOC 6
static const unsigned long goodix_irq_flags[] = {
IRQ_TYPE_EDGE_RISING,
IRQ_TYPE_EDGE_FALLING,
IRQ_TYPE_LEVEL_LOW,
IRQ_TYPE_LEVEL_HIGH,
};
/**
* goodix_i2c_read - read data from a register of the i2c slave device.
*
* @client: i2c device.
* @reg: the register to read from.
* @buf: raw write data buffer.
* @len: length of the buffer to write
*/
static int goodix_i2c_read(struct i2c_client *client,
u16 reg, u8 *buf, int len)
{
struct i2c_msg msgs[2];
u16 wbuf = cpu_to_be16(reg);
int ret;
msgs[0].flags = 0;
msgs[0].addr = client->addr;
msgs[0].len = 2;
msgs[0].buf = (u8 *) &wbuf;
msgs[1].flags = I2C_M_RD;
msgs[1].addr = client->addr;
msgs[1].len = len;
msgs[1].buf = buf;
ret = i2c_transfer(client->adapter, msgs, 2);
return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0);
}
static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
{
int touch_num;
int error;
error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
GOODIX_CONTACT_SIZE + 1);
if (error) {
dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
return error;
}
touch_num = data[0] & 0x0f;
if (touch_num > GOODIX_MAX_CONTACTS)
return -EPROTO;
if (touch_num > 1) {
data += 1 + GOODIX_CONTACT_SIZE;
error = goodix_i2c_read(ts->client,
GOODIX_READ_COOR_ADDR +
1 + GOODIX_CONTACT_SIZE,
data,
GOODIX_CONTACT_SIZE * (touch_num - 1));
if (error)
return error;
}
return touch_num;
}
static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
{
int id = coor_data[0] & 0x0F;
int input_x = get_unaligned_le16(&coor_data[1]);
int input_y = get_unaligned_le16(&coor_data[3]);
int input_w = get_unaligned_le16(&coor_data[5]);
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
}
/**
* goodix_process_events - Process incoming events
*
* @ts: our goodix_ts_data pointer
*
* Called when the IRQ is triggered. Read the current device state, and push
* the input events to the user space.
*/
static void goodix_process_events(struct goodix_ts_data *ts)
{
u8 point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
int touch_num;
int i;
touch_num = goodix_ts_read_input_report(ts, point_data);
if (touch_num < 0)
return;
for (i = 0; i < touch_num; i++)
goodix_ts_report_touch(ts,
&point_data[1 + GOODIX_CONTACT_SIZE * i]);
input_mt_sync_frame(ts->input_dev);
input_sync(ts->input_dev);
}
/**
* goodix_ts_irq_handler - The IRQ handler
*
* @irq: interrupt number.
* @dev_id: private data pointer.
*/
static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
{
static const u8 end_cmd[] = {
GOODIX_READ_COOR_ADDR >> 8,
GOODIX_READ_COOR_ADDR & 0xff,
0
};
struct goodix_ts_data *ts = dev_id;
goodix_process_events(ts);
if (i2c_master_send(ts->client, end_cmd, sizeof(end_cmd)) < 0)
dev_err(&ts->client->dev, "I2C write end_cmd error\n");
return IRQ_HANDLED;
}
/**
* goodix_read_config - Read the embedded configuration of the panel
*
* @ts: our goodix_ts_data pointer
*
* Must be called during probe
*/
static void goodix_read_config(struct goodix_ts_data *ts)
{
u8 config[GOODIX_CONFIG_MAX_LENGTH];
int error;
error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
config,
GOODIX_CONFIG_MAX_LENGTH);
if (error) {
dev_warn(&ts->client->dev,
"Error reading config (%d), using defaults\n",
error);
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
ts->int_trigger_type = GOODIX_INT_TRIGGER;
return;
}
ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03;
if (!ts->abs_x_max || !ts->abs_y_max) {
dev_err(&ts->client->dev,
"Invalid config, using defaults\n");
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
}
}
/**
* goodix_read_version - Read goodix touchscreen version
*
* @client: the i2c client
* @version: output buffer containing the version on success
*/
static int goodix_read_version(struct i2c_client *client, u16 *version)
{
int error;
u8 buf[6];
error = goodix_i2c_read(client, GOODIX_REG_VERSION, buf, sizeof(buf));
if (error) {
dev_err(&client->dev, "read version failed: %d\n", error);
return error;
}
if (version)
*version = get_unaligned_le16(&buf[4]);
dev_info(&client->dev, "IC VERSION: %6ph\n", buf);
return 0;
}
/**
* goodix_i2c_test - I2C test function to check if the device answers.
*
* @client: the i2c client
*/
static int goodix_i2c_test(struct i2c_client *client)
{
int retry = 0;
int error;
u8 test;
while (retry++ < 2) {
error = goodix_i2c_read(client, GOODIX_REG_CONFIG_DATA,
&test, 1);
if (!error)
return 0;
dev_err(&client->dev, "i2c test failed attempt %d: %d\n",
retry, error);
msleep(20);
}
return error;
}
/**
* goodix_request_input_dev - Allocate, populate and register the input device
*
* @ts: our goodix_ts_data pointer
*
* Must be called during probe
*/
static int goodix_request_input_dev(struct goodix_ts_data *ts)
{
int error;
ts->input_dev = devm_input_allocate_device(&ts->client->dev);
if (!ts->input_dev) {
dev_err(&ts->client->dev, "Failed to allocate input device.");
return -ENOMEM;
}
ts->input_dev->evbit[0] = BIT_MASK(EV_SYN) |
BIT_MASK(EV_KEY) |
BIT_MASK(EV_ABS);
input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
ts->abs_x_max, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
ts->abs_y_max, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
input_mt_init_slots(ts->input_dev, GOODIX_MAX_CONTACTS,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
ts->input_dev->name = "Goodix Capacitive TouchScreen";
ts->input_dev->phys = "input/ts";
ts->input_dev->id.bustype = BUS_I2C;
ts->input_dev->id.vendor = 0x0416;
ts->input_dev->id.product = 0x1001;
ts->input_dev->id.version = 10427;
error = input_register_device(ts->input_dev);
if (error) {
dev_err(&ts->client->dev,
"Failed to register input device: %d", error);
return error;
}
return 0;
}
static int goodix_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct goodix_ts_data *ts;
unsigned long irq_flags;
int error;
u16 version_info;
dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev, "I2C check functionality failed.\n");
return -ENXIO;
}
ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
ts->client = client;
i2c_set_clientdata(client, ts);
error = goodix_i2c_test(client);
if (error) {
dev_err(&client->dev, "I2C communication failure: %d\n", error);
return error;
}
error = goodix_read_version(client, &version_info);
if (error) {
dev_err(&client->dev, "Read version failed.\n");
return error;
}
goodix_read_config(ts);
error = goodix_request_input_dev(ts);
if (error)
return error;
irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
error = devm_request_threaded_irq(&ts->client->dev, client->irq,
NULL, goodix_ts_irq_handler,
irq_flags, client->name, ts);
if (error) {
dev_err(&client->dev, "request IRQ failed: %d\n", error);
return error;
}
return 0;
}
static const struct i2c_device_id goodix_ts_id[] = {
{ "GDIX1001:00", 0 },
{ }
};
static const struct acpi_device_id goodix_acpi_match[] = {
{ "GDIX1001", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
static struct i2c_driver goodix_ts_driver = {
.probe = goodix_ts_probe,
.id_table = goodix_ts_id,
.driver = {
.name = "Goodix-TS",
.owner = THIS_MODULE,
.acpi_match_table = goodix_acpi_match,
},
};
module_i2c_driver(goodix_ts_driver);
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
MODULE_DESCRIPTION("Goodix touchscreen driver");
MODULE_LICENSE("GPL v2");

6
drivers/input/touchscreen/ili210x.c
Просмотреть файл

@ -311,8 +311,7 @@ static int ili210x_i2c_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int ili210x_i2c_suspend(struct device *dev)
static int __maybe_unused ili210x_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -322,7 +321,7 @@ static int ili210x_i2c_suspend(struct device *dev)
return 0;
}
static int ili210x_i2c_resume(struct device *dev)
static int __maybe_unused ili210x_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -331,7 +330,6 @@ static int ili210x_i2c_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm,
ili210x_i2c_suspend, ili210x_i2c_resume);

6
drivers/input/touchscreen/ipaq-micro-ts.c
Просмотреть файл

@ -122,8 +122,7 @@ static int micro_ts_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int micro_ts_suspend(struct device *dev)
static int __maybe_unused micro_ts_suspend(struct device *dev)
{
struct touchscreen_data *ts = dev_get_drvdata(dev);
@ -132,7 +131,7 @@ static int micro_ts_suspend(struct device *dev)
return 0;
}
static int micro_ts_resume(struct device *dev)
static int __maybe_unused micro_ts_resume(struct device *dev)
{
struct touchscreen_data *ts = dev_get_drvdata(dev);
struct input_dev *input = ts->input;
@ -146,7 +145,6 @@ static int micro_ts_resume(struct device *dev)
return 0;
}
#endif
static const struct dev_pm_ops micro_ts_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(micro_ts_suspend, micro_ts_resume)

6
drivers/input/touchscreen/mms114.c
Просмотреть файл

@ -515,8 +515,7 @@ static int mms114_probe(struct i2c_client *client,
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mms114_suspend(struct device *dev)
static int __maybe_unused mms114_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mms114_data *data = i2c_get_clientdata(client);
@ -540,7 +539,7 @@ static int mms114_suspend(struct device *dev)
return 0;
}
static int mms114_resume(struct device *dev)
static int __maybe_unused mms114_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mms114_data *data = i2c_get_clientdata(client);
@ -559,7 +558,6 @@ static int mms114_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);

6
drivers/input/touchscreen/pixcir_i2c_ts.c
Просмотреть файл

@ -347,8 +347,7 @@ static void pixcir_input_close(struct input_dev *dev)
pixcir_stop(ts);
}
#ifdef CONFIG_PM_SLEEP
static int pixcir_i2c_ts_suspend(struct device *dev)
static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
@ -377,7 +376,7 @@ unlock:
return ret;
}
static int pixcir_i2c_ts_resume(struct device *dev)
static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
@ -405,7 +404,6 @@ unlock:
return ret;
}
#endif
static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);

7
drivers/input/touchscreen/st1232.c
Просмотреть файл

@ -243,8 +243,7 @@ static int st1232_ts_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int st1232_ts_suspend(struct device *dev)
static int __maybe_unused st1232_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct st1232_ts_data *ts = i2c_get_clientdata(client);
@ -259,7 +258,7 @@ static int st1232_ts_suspend(struct device *dev)
return 0;
}
static int st1232_ts_resume(struct device *dev)
static int __maybe_unused st1232_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct st1232_ts_data *ts = i2c_get_clientdata(client);
@ -274,8 +273,6 @@ static int st1232_ts_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
st1232_ts_suspend, st1232_ts_resume);

6
drivers/input/touchscreen/tsc2005.c
Просмотреть файл

@ -773,8 +773,7 @@ static int tsc2005_remove(struct spi_device *spi)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int tsc2005_suspend(struct device *dev)
static int __maybe_unused tsc2005_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct tsc2005 *ts = spi_get_drvdata(spi);
@ -791,7 +790,7 @@ static int tsc2005_suspend(struct device *dev)
return 0;
}
static int tsc2005_resume(struct device *dev)
static int __maybe_unused tsc2005_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct tsc2005 *ts = spi_get_drvdata(spi);
@ -807,7 +806,6 @@ static int tsc2005_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(tsc2005_pm_ops, tsc2005_suspend, tsc2005_resume);

6
drivers/input/touchscreen/ucb1400_ts.c
Просмотреть файл

@ -406,8 +406,7 @@ static int ucb1400_ts_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int ucb1400_ts_suspend(struct device *dev)
static int __maybe_unused ucb1400_ts_suspend(struct device *dev)
{
struct ucb1400_ts *ucb = dev_get_platdata(dev);
struct input_dev *idev = ucb->ts_idev;
@ -421,7 +420,7 @@ static int ucb1400_ts_suspend(struct device *dev)
return 0;
}
static int ucb1400_ts_resume(struct device *dev)
static int __maybe_unused ucb1400_ts_resume(struct device *dev)
{
struct ucb1400_ts *ucb = dev_get_platdata(dev);
struct input_dev *idev = ucb->ts_idev;
@ -434,7 +433,6 @@ static int ucb1400_ts_resume(struct device *dev)
mutex_unlock(&idev->mutex);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops,
ucb1400_ts_suspend, ucb1400_ts_resume);

6
drivers/input/touchscreen/wacom_i2c.c
Просмотреть файл

@ -242,8 +242,7 @@ static int wacom_i2c_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int wacom_i2c_suspend(struct device *dev)
static int __maybe_unused wacom_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -252,7 +251,7 @@ static int wacom_i2c_suspend(struct device *dev)
return 0;
}
static int wacom_i2c_resume(struct device *dev)
static int __maybe_unused wacom_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -260,7 +259,6 @@ static int wacom_i2c_resume(struct device *dev)
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);

6
drivers/input/touchscreen/zforce_ts.c
Просмотреть файл

@ -602,8 +602,7 @@ static void zforce_input_close(struct input_dev *dev)
return;
}
#ifdef CONFIG_PM_SLEEP
static int zforce_suspend(struct device *dev)
static int __maybe_unused zforce_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct zforce_ts *ts = i2c_get_clientdata(client);
@ -648,7 +647,7 @@ unlock:
return ret;
}
static int zforce_resume(struct device *dev)
static int __maybe_unused zforce_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct zforce_ts *ts = i2c_get_clientdata(client);
@ -685,7 +684,6 @@ unlock:
return ret;
}
#endif
static SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume);