ASoC: ak4613: add TDM256 support
AK4613 has STEREO/TDM512/TDM256/TDM128 mode. Renesas is the only user of ak4613 on upstream for now, and is using it as STEREO mode, because of board connection. Thus, current driver is supporting STEREO mode only, and other modes are not supported. But I noticed that I can try first 2ch out of TDM256 mode 8ch Playback even in such a situation. But because of board connection, I can't test full TDM256 mode, and/or other TDM mode. Thus I don't want to add new DT propaty for now. This patch enables TDM256 mode test by "ifdef style", but it has no effect to current supported STEREO mode. You can define AK4613_ENABLE_TDM_TEST to try TDM256 mode. Please don't hesitate to break current code if you can add full TDM256 and/or other TDM mode. You don't need to care compatibility with Renesas. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/878rskp9l0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Kuninori Morimoto
Mark Brown
Родитель
7bbb049c96
Коммит
f28dbaa958
|
|
@ -10,11 +10,97 @@
|
|||
// Based on ak4535.c by Richard Purdie
|
||||
// Based on wm8753.c by Liam Girdwood
|
||||
|
||||
/*
|
||||
* +-------+
|
||||
* |AK4613 |
|
||||
* SDTO1 <-| |
|
||||
* | |
|
||||
* SDTI1 ->| |
|
||||
* SDTI2 ->| |
|
||||
* SDTI3 ->| |
|
||||
* +-------+
|
||||
*
|
||||
* +---+
|
||||
* clk | |___________________________________________...
|
||||
*
|
||||
* [TDM512]
|
||||
* SDTO1 [L1][R1][L2][R2]
|
||||
* SDTI1 [L1][R1][L2][R2][L3][R3][L4][R4][L5][R5][L6][R6]
|
||||
*
|
||||
* [TDM256]
|
||||
* SDTO1 [L1][R1][L2][R2]
|
||||
* SDTI1 [L1][R1][L2][R2][L3][R3][L4][R4]
|
||||
* SDTI2 [L5][R5][L6][R6]
|
||||
*
|
||||
* [TDM128]
|
||||
* SDTO1 [L1][R1][L2][R2]
|
||||
* SDTI1 [L1][R1][L2][R2]
|
||||
* SDTI2 [L3][R3][L4][R4]
|
||||
* SDTI3 [L5][R5][L6][R6]
|
||||
*
|
||||
* [STEREO]
|
||||
* Playback 2ch : SDTI1
|
||||
* Capture 2ch : SDTO1
|
||||
*
|
||||
* [TDM512]
|
||||
* Playback 12ch : SDTI1
|
||||
* Capture 4ch : SDTO1
|
||||
*
|
||||
* [TDM256]
|
||||
* Playback 12ch : SDTI1 + SDTI2
|
||||
* Playback 8ch : SDTI1
|
||||
* Capture 4ch : SDTO1
|
||||
*
|
||||
* [TDM128]
|
||||
* Playback 12ch : SDTI1 + SDTI2 + SDTI3
|
||||
* Playback 8ch : SDTI1 + SDTI2
|
||||
* Playback 4ch : SDTI1
|
||||
* Capture 4ch : SDTO1
|
||||
*
|
||||
*
|
||||
* !!! NOTE !!!
|
||||
*
|
||||
* Renesas is the only user of ak4613 on upstream so far,
|
||||
* but the chip connection is like below.
|
||||
* Thus, Renesas can't test all connection case.
|
||||
* Tested TDM is very limited.
|
||||
*
|
||||
* +-----+ +-----------+
|
||||
* | SoC | | AK4613 |
|
||||
* | |<-----|SDTO1 IN1|<-- Mic
|
||||
* | | | IN2|
|
||||
* | | | |
|
||||
* | |----->|SDTI1 OUT1|--> Headphone
|
||||
* +-----+ |SDTI2 OUT2|
|
||||
* |SDTI3 OUT3|
|
||||
* | OUT4|
|
||||
* | OUT5|
|
||||
* | OUT6|
|
||||
* +-----------+
|
||||
*
|
||||
* Renesas SoC can handle [2, 6,8] channels.
|
||||
* Ak4613 can handle [2,4, 8,12] channels.
|
||||
*
|
||||
* Because of above HW connection and available channels number,
|
||||
* Renesas could test are ...
|
||||
*
|
||||
* [STEREO] Playback 2ch : SDTI1
|
||||
* Capture 2ch : SDTO1
|
||||
* [TDM256] Playback 8ch : SDTI1 (*)
|
||||
*
|
||||
* (*) it used 8ch data between SoC <-> AK4613 on TDM256 mode,
|
||||
* but could confirm is only first 2ch because only 1
|
||||
* Headphone is connected.
|
||||
*
|
||||
* see
|
||||
* AK4613_ENABLE_TDM_TEST
|
||||
*/
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_graph.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <sound/soc.h>
|
||||
|
|
@ -78,6 +164,53 @@
|
|||
/* OCTRL */
|
||||
#define OCTRL_MASK (0x3F)
|
||||
|
||||
/*
|
||||
* configs
|
||||
*
|
||||
* 0x000000BA
|
||||
*
|
||||
* B : AK4613_CONFIG_SDTI_x
|
||||
* A : AK4613_CONFIG_MODE_x
|
||||
*/
|
||||
#define AK4613_CONFIG_SET(priv, x) priv->configs |= AK4613_CONFIG_##x
|
||||
#define AK4613_CONFIG_GET(priv, x) (priv->configs & AK4613_CONFIG_##x##_MASK)
|
||||
|
||||
/*
|
||||
* AK4613_CONFIG_SDTI_x
|
||||
*
|
||||
* It indicates how many SDTIx is connected.
|
||||
*/
|
||||
#define AK4613_CONFIG_SDTI_MASK (0xF << 4)
|
||||
#define AK4613_CONFIG_SDTI(x) (((x) & 0xF) << 4)
|
||||
#define AK4613_CONFIG_SDTI_set(priv, x) AK4613_CONFIG_SET(priv, SDTI(x))
|
||||
#define AK4613_CONFIG_SDTI_get(priv) ((AK4613_CONFIG_GET(priv, SDTI) >> 4) & 0xF)
|
||||
|
||||
/*
|
||||
* AK4613_CONFIG_MODE_x
|
||||
*
|
||||
* Same as Ctrl1 :: TDM1/TDM0
|
||||
* No shift is requested
|
||||
* see
|
||||
* AK4613_CTRL1_TO_MODE()
|
||||
* Table 11/12/13/14
|
||||
*/
|
||||
#define AK4613_CONFIG_MODE_MASK (0xF)
|
||||
#define AK4613_CONFIG_MODE_STEREO (0x0)
|
||||
#define AK4613_CONFIG_MODE_TDM512 (0x1)
|
||||
#define AK4613_CONFIG_MODE_TDM256 (0x2)
|
||||
#define AK4613_CONFIG_MODE_TDM128 (0x3)
|
||||
|
||||
/*
|
||||
* !!!! FIXME !!!!
|
||||
*
|
||||
* Because of testable HW limitation, TDM256 8ch TDM was only tested.
|
||||
* This driver uses AK4613_ENABLE_TDM_TEST instead of new DT property so far.
|
||||
* Don't hesitate to update driver, you don't need to care compatible
|
||||
* with Renesas.
|
||||
*
|
||||
* #define AK4613_ENABLE_TDM_TEST
|
||||
*/
|
||||
|
||||
struct ak4613_interface {
|
||||
unsigned int width;
|
||||
unsigned int fmt;
|
||||
|
|
@ -87,12 +220,14 @@ struct ak4613_interface {
|
|||
struct ak4613_priv {
|
||||
struct mutex lock;
|
||||
struct snd_pcm_hw_constraint_list constraint_rates;
|
||||
struct snd_pcm_hw_constraint_list constraint_channels;
|
||||
struct work_struct dummy_write_work;
|
||||
struct snd_soc_component *component;
|
||||
unsigned int rate;
|
||||
unsigned int sysclk;
|
||||
|
||||
unsigned int fmt;
|
||||
unsigned int configs;
|
||||
int cnt;
|
||||
u8 ctrl1;
|
||||
u8 oc;
|
||||
|
|
@ -150,6 +285,7 @@ static const struct ak4613_interface ak4613_iface[] = {
|
|||
AUDIO_IFACE(0x03, 24, LEFT_J),
|
||||
AUDIO_IFACE(0x04, 24, I2S),
|
||||
};
|
||||
#define AK4613_CTRL1_TO_MODE(priv) ((priv)->ctrl1 >> 6) /* AK4613_CONFIG_MODE_x */
|
||||
|
||||
static const struct regmap_config ak4613_regmap_cfg = {
|
||||
.reg_bits = 8,
|
||||
|
|
@ -260,8 +396,9 @@ static void ak4613_dai_shutdown(struct snd_pcm_substream *substream,
|
|||
}
|
||||
|
||||
static void ak4613_hw_constraints(struct ak4613_priv *priv,
|
||||
struct snd_pcm_runtime *runtime)
|
||||
struct snd_pcm_substream *substream)
|
||||
{
|
||||
struct snd_pcm_runtime *runtime = substream->runtime;
|
||||
static const unsigned int ak4613_rates[] = {
|
||||
32000,
|
||||
44100,
|
||||
|
|
@ -272,8 +409,33 @@ static void ak4613_hw_constraints(struct ak4613_priv *priv,
|
|||
176400,
|
||||
192000,
|
||||
};
|
||||
#define AK4613_CHANNEL_2 0
|
||||
#define AK4613_CHANNEL_4 1
|
||||
#define AK4613_CHANNEL_8 2
|
||||
#define AK4613_CHANNEL_12 3
|
||||
#define AK4613_CHANNEL_NONE -1
|
||||
static const unsigned int ak4613_channels[] = {
|
||||
[AK4613_CHANNEL_2] = 2,
|
||||
[AK4613_CHANNEL_4] = 4,
|
||||
[AK4613_CHANNEL_8] = 8,
|
||||
[AK4613_CHANNEL_12] = 12,
|
||||
};
|
||||
#define MODE_MAX 4
|
||||
#define SDTx_MAX 4
|
||||
#define MASK(x) (1 << AK4613_CHANNEL_##x)
|
||||
static const int mask_list[MODE_MAX][SDTx_MAX] = {
|
||||
/* SDTO SDTIx1 SDTIx2 SDTIx3 */
|
||||
[AK4613_CONFIG_MODE_STEREO] = { MASK(2), MASK(2), MASK(2), MASK(2)},
|
||||
[AK4613_CONFIG_MODE_TDM512] = { MASK(4), MASK(12), MASK(12), MASK(12)},
|
||||
[AK4613_CONFIG_MODE_TDM256] = { MASK(4), MASK(8), MASK(8)|MASK(12), MASK(8)|MASK(12)},
|
||||
[AK4613_CONFIG_MODE_TDM128] = { MASK(4), MASK(4), MASK(4)|MASK(8), MASK(4)|MASK(8)|MASK(12)},
|
||||
};
|
||||
struct snd_pcm_hw_constraint_list *constraint;
|
||||
unsigned int mask;
|
||||
unsigned int mode;
|
||||
unsigned int fs;
|
||||
int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
||||
int sdti_num;
|
||||
int i;
|
||||
|
||||
constraint = &priv->constraint_rates;
|
||||
|
|
@ -302,6 +464,41 @@ static void ak4613_hw_constraints(struct ak4613_priv *priv,
|
|||
|
||||
snd_pcm_hw_constraint_list(runtime, 0,
|
||||
SNDRV_PCM_HW_PARAM_RATE, constraint);
|
||||
|
||||
|
||||
sdti_num = AK4613_CONFIG_SDTI_get(priv);
|
||||
if (WARN_ON(sdti_num >= SDTx_MAX))
|
||||
return;
|
||||
|
||||
if (priv->cnt) {
|
||||
/*
|
||||
* If it was already working,
|
||||
* the constraint is same as working mode.
|
||||
*/
|
||||
mode = AK4613_CTRL1_TO_MODE(priv);
|
||||
mask = 0; /* no default */
|
||||
} else {
|
||||
/*
|
||||
* It is not yet working,
|
||||
* the constraint is based on board configs.
|
||||
* STEREO mask is default
|
||||
*/
|
||||
mode = AK4613_CONFIG_GET(priv, MODE);
|
||||
mask = mask_list[AK4613_CONFIG_MODE_STEREO][is_play * sdti_num];
|
||||
}
|
||||
|
||||
if (WARN_ON(mode >= MODE_MAX))
|
||||
return;
|
||||
|
||||
/* add each mode mask */
|
||||
mask |= mask_list[mode][is_play * sdti_num];
|
||||
|
||||
constraint = &priv->constraint_channels;
|
||||
constraint->list = ak4613_channels;
|
||||
constraint->mask = mask;
|
||||
constraint->count = sizeof(ak4613_channels);
|
||||
snd_pcm_hw_constraint_list(runtime, 0,
|
||||
SNDRV_PCM_HW_PARAM_CHANNELS, constraint);
|
||||
}
|
||||
|
||||
static int ak4613_dai_startup(struct snd_pcm_substream *substream,
|
||||
|
|
@ -311,11 +508,10 @@ static int ak4613_dai_startup(struct snd_pcm_substream *substream,
|
|||
struct ak4613_priv *priv = snd_soc_component_get_drvdata(component);
|
||||
|
||||
mutex_lock(&priv->lock);
|
||||
ak4613_hw_constraints(priv, substream);
|
||||
priv->cnt++;
|
||||
mutex_unlock(&priv->lock);
|
||||
|
||||
ak4613_hw_constraints(priv, substream->runtime);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -399,7 +595,7 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
|
|||
/*
|
||||
* FIXME
|
||||
*
|
||||
* It doesn't support TDM at this point
|
||||
* It doesn't have full TDM suppert yet
|
||||
*/
|
||||
ret = -EINVAL;
|
||||
|
||||
|
|
@ -413,6 +609,15 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
|
|||
/*
|
||||
* It is not yet working,
|
||||
*/
|
||||
unsigned int channel = params_channels(params);
|
||||
u8 tdm;
|
||||
|
||||
/* STEREO or TDM */
|
||||
if (channel == 2)
|
||||
tdm = AK4613_CONFIG_MODE_STEREO;
|
||||
else
|
||||
tdm = AK4613_CONFIG_GET(priv, MODE);
|
||||
|
||||
for (i = ARRAY_SIZE(ak4613_iface) - 1; i >= 0; i--) {
|
||||
const struct ak4613_interface *iface = ak4613_iface + i;
|
||||
|
||||
|
|
@ -421,9 +626,9 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
|
|||
* Ctrl1
|
||||
* | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
|
||||
* |TDM1|TDM0|DIF2|DIF1|DIF0|ATS1|ATS0|SMUTE|
|
||||
* < iface->dif >
|
||||
* < tdm > < iface->dif >
|
||||
*/
|
||||
priv->ctrl1 = (iface->dif << 3);
|
||||
priv->ctrl1 = (tdm << 6) | (iface->dif << 3);
|
||||
ret = 0;
|
||||
break;
|
||||
}
|
||||
|
|
@ -578,14 +783,14 @@ static struct snd_soc_dai_driver ak4613_dai = {
|
|||
.playback = {
|
||||
.stream_name = "Playback",
|
||||
.channels_min = 2,
|
||||
.channels_max = 2,
|
||||
.channels_max = 12,
|
||||
.rates = AK4613_PCM_RATE,
|
||||
.formats = AK4613_PCM_FMTBIT,
|
||||
},
|
||||
.capture = {
|
||||
.stream_name = "Capture",
|
||||
.channels_min = 2,
|
||||
.channels_max = 2,
|
||||
.channels_max = 4,
|
||||
.rates = AK4613_PCM_RATE,
|
||||
.formats = AK4613_PCM_FMTBIT,
|
||||
},
|
||||
|
|
@ -630,6 +835,7 @@ static void ak4613_parse_of(struct ak4613_priv *priv,
|
|||
{
|
||||
struct device_node *np = dev->of_node;
|
||||
char prop[32];
|
||||
int sdti_num;
|
||||
int i;
|
||||
|
||||
/* Input 1 - 2 */
|
||||
|
|
@ -645,6 +851,29 @@ static void ak4613_parse_of(struct ak4613_priv *priv,
|
|||
if (!of_get_property(np, prop, NULL))
|
||||
priv->oc |= 1 << i;
|
||||
}
|
||||
|
||||
/*
|
||||
* enable TDM256 test
|
||||
*
|
||||
* !!! FIXME !!!
|
||||
*
|
||||
* It should be configured by DT or other way
|
||||
* if it was full supported.
|
||||
* But it is using ifdef style for now for test
|
||||
* purpose.
|
||||
*/
|
||||
#if defined(AK4613_ENABLE_TDM_TEST)
|
||||
AK4613_CONFIG_SET(priv, MODE_TDM256);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* connected STDI
|
||||
*/
|
||||
sdti_num = of_graph_get_endpoint_count(np);
|
||||
if (WARN_ON((sdti_num > 3) || (sdti_num < 1)))
|
||||
return;
|
||||
|
||||
AK4613_CONFIG_SDTI_set(priv, sdti_num);
|
||||
}
|
||||
|
||||
static int ak4613_i2c_probe(struct i2c_client *i2c,
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче