iwlwifi: correct 6000 EEPROM regulatory address
For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
This commit is contained in:
Родитель
88be026490
Коммит
f2fa1b015e
|
@ -259,7 +259,7 @@ static struct iwl_lib_ops iwl6000_lib = {
|
|||
EEPROM_5000_REG_BAND_3_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_4_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_5_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
|
||||
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
|
||||
},
|
||||
.verify_signature = iwlcore_eeprom_verify_signature,
|
||||
|
@ -323,7 +323,7 @@ static struct iwl_lib_ops iwl6050_lib = {
|
|||
EEPROM_5000_REG_BAND_3_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_4_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_5_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
|
||||
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
|
||||
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
|
||||
},
|
||||
.verify_signature = iwlcore_eeprom_verify_signature,
|
||||
|
|
|
@ -203,6 +203,10 @@ struct iwl_eeprom_enhanced_txpwr {
|
|||
#define EEPROM_5000_REG_BAND_52_HT40_CHANNELS ((0x92)\
|
||||
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */
|
||||
|
||||
/* 6000 regulatory - indirect access */
|
||||
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\
|
||||
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
|
||||
|
||||
/* 6000 and up regulatory tx power - indirect access */
|
||||
/* max. elements per section */
|
||||
#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8)
|
||||
|
|
Загрузка…
Ссылка в новой задаче