microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (100 commits)
  ide: move hwif_register() call out of ide_probe_port()
  ide: factor out code for tuning devices from ide_probe_port()
  ide: move handling of I/O resources out of ide_probe_port()
  ide: make probe_hwif() return an error value
  ide: use ide_remove_port_from_hwgroup in init_irq()
  ide: prepare init_irq() for using ide_remove_port_from_hwgroup()
  ide: factor out code removing port from hwgroup from ide_unregister()
  ide: I/O resources are released too early in ide_unregister()
  ide: cleanup ide_system_bus_speed()
  ide: remove needless zeroing of hwgroup fields from init_irq()
  ide: remove unused ide_hwgroup_t fields
  ide_platform: remove struct hwif_prop
  ide: remove hwif->present manipulations from hwif_init()
  ide: move wait_hwif_ready() documentation in the right place
  ide: fix handling of busy I/O resources in probe_hwif()
  <linux/hdsmart.h> is not used by kernel code
  ide: don't include <linux/hdsmart.h>
  ide-floppy: cleanup header
  ide: update/add my Copyrights
  ide: delete filenames/versions from comments
  ...
This commit is contained in:
Linus Torvalds 2008-02-02 09:58:02 +11:00
Родитель cbb51afa6d a14dc57495
Коммит f3191248bf
86 изменённых файлов: 2604 добавлений и 3643 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

268
Documentation/ide/ChangeLog.ide-cd.1994-2004 Normal file
Просмотреть файл

@ -0,0 +1,268 @@
/*
* 1.00 Oct 31, 1994 -- Initial version.
* 1.01 Nov 2, 1994 -- Fixed problem with starting request in
* cdrom_check_status.
* 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks)
* (from mlord) -- minor changes to cdrom_setup()
* -- renamed ide_dev_s to ide_drive_t, enable irq on command
* 2.00 Nov 27, 1994 -- Generalize packet command interface;
* add audio ioctls.
* 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices
* which send an interrupt when ready for a command.
* 2.02 Dec 11, 1994 -- Cache the TOC in the driver.
* Don't use SCMD_PLAYAUDIO_TI; it's not included
* in the current version of ATAPI.
* Try to use LBA instead of track or MSF addressing
* when possible.
* Don't wait for READY_STAT.
* 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes
* other than 2k and to move multiple sectors in a
* single transaction.
* 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives.
* Thanks to Nick Saw <cwsaw@pts7.pts.mot.com> for
* help in figuring this out. Ditto for Acer and
* Aztech drives, which seem to have the same problem.
* 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
* 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
* or data protect error.
* Use HWIF and DEV_HWIF macros as in ide.c.
* Always try to do a request_sense after
* a failed command.
* Include an option to give textual descriptions
* of ATAPI errors.
* Fix a bug in handling the sector cache which
* showed up if the drive returned data in 512 byte
* blocks (like Pioneer drives). Thanks to
* Richard Hirst <srh@gpt.co.uk> for diagnosing this.
* Properly supply the page number field in the
* MODE_SELECT command.
* PLAYAUDIO12 is broken on the Aztech; work around it.
* 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
* (my apologies to Scott, but now ide-cd.c is independent)
* 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl.
* Implement CDROMREADAUDIO ioctl (UNTESTED).
* Use input_ide_data() and output_ide_data().
* Add door locking.
* Fix usage count leak in cdrom_open, which happened
* when a read-write mount was attempted.
* Try to load the disk on open.
* Implement CDROMEJECT_SW ioctl (off by default).
* Read total cdrom capacity during open.
* Rearrange logic in cdrom_decode_status. Issue
* request sense commands for failed packet commands
* from here instead of from cdrom_queue_packet_command.
* Fix a race condition in retrieving error information.
* Suppress printing normal unit attention errors and
* some drive not ready errors.
* Implement CDROMVOLREAD ioctl.
* Implement CDROMREADMODE1/2 ioctls.
* Fix race condition in setting up interrupt handlers
* when the `serialize' option is used.
* 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
* cdrom_queue_request.
* Another try at using ide_[input,output]_data.
* 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
* Make VERBOSE_IDE_CD_ERRORS dump failed command again.
* Dump out more information for ILLEGAL REQUEST errs.
* Fix handling of errors occurring before the
* packet command is transferred.
* Fix transfers with odd bytelengths.
* 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
* `DCI-2S10' drives are broken too.
* 3.04 Nov 20, 1995 -- So are Vertos drives.
* 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
* 3.06 Dec 16, 1995 -- Add support needed for partitions.
* More workarounds for Vertos bugs (based on patches
* from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>).
* Try to eliminate byteorder assumptions.
* Use atapi_cdrom_subchnl struct definition.
* Add STANDARD_ATAPI compilation option.
* 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
* Vertos 300.
* Add NO_DOOR_LOCKING configuration option.
* Handle drive_cmd requests w/NULL args (for hdparm -t).
* Work around sporadic Sony55e audio play problem.
* 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
* problem with "hde=cdrom" with no drive present. -ml
* 3.08 Mar 6, 1996 -- More Vertos workarounds.
* 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
* Switch to using MSF addressing for audio commands.
* Reformat to match kernel tabbing style.
* Add CDROM_GET_UPC ioctl.
* 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI.
* 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt <heiko@colossus.escape.de>
* to remove redundant verify_area calls.
* 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches
* from Gerhard Zuber <zuber@berlin.snafu.de>.
* Let open succeed even if there's no loaded disc.
* 3.13 May 19, 1996 -- Fixes for changer code.
* 3.14 May 29, 1996 -- Add work-around for Vertos 600.
* (From Hennus Bergman <hennus@sky.ow.nl>.)
* 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
* from Ben Galliart <bgallia@luc.edu> with
* special help from Jeff Lightfoot
* <jeffml@pobox.com>
* 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
* 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
* 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
* Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
* 3.18 Oct 31, 1996 -- Added module and DMA support.
*
* 4.00 Nov 5, 1996 -- New ide-cd maintainer,
* Erik B. Andersen <andersee@debian.org>
* -- Newer Creative drives don't always set the error
* register correctly. Make sure we see media changes
* regardless.
* -- Integrate with generic cdrom driver.
* -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
* a patch from Ciro Cattuto <>.
* -- Call set_device_ro.
* -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
* ioctls, based on patch by Erik Andersen
* -- Add some probes of drive capability during setup.
*
* 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
* -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
* ioctls in favor of a generalized approach
* using the generic cdrom driver.
* -- Fully integrated with the 2.1.X kernel.
* -- Other stuff that I forgot (lots of changes)
*
* 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il>
* to fix the drive door locking problems.
*
* 4.03 Dec 04, 1996 -- Added DSC overlap support.
* 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
* by Ales Makarov (xmakarov@sun.felk.cvut.cz)
*
* 4.05 Nov 20, 1997 -- Modified to print more drive info on init
* Minor other changes
* Fix errors on CDROMSTOP (If you have a "Dolphin",
* you must define IHAVEADOLPHIN)
* Added identifier so new Sanyo CD-changer works
* Better detection if door locking isn't supported
*
* 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml
* 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open"
* 4.08 Dec 18, 1997 -- spew less noise when tray is empty
* -- fix speed display for ACER 24X, 18X
* 4.09 Jan 04, 1998 -- fix handling of the last block so we return
* an end of file instead of an I/O error (Gadi)
* 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
* slot when there is no disc in the current slot.
* -- Fixed a memory leak where info->changer_info was
* malloc'ed but never free'd when closing the device.
* -- Cleaned up the global namespace a bit by making more
* functions static that should already have been.
* 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
* based on a patch for 2.0.33 by Jelle Foks
* <jelle@scintilla.utwente.nl>, a patch for 2.0.33
* by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI
* version, and my own efforts. -erik
* -- Fixed a stupid bug which egcs was kind enough to
* inform me of where "Illegal mode for this track"
* was never returned due to a comparison on data
* types of limited range.
* 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
* now set ionly for CD-R and CD-RW drives. I had
* removed this support because it produced errors.
* It produced errors _only_ for non-writers. duh.
* 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
* messages, since this is not an error.
* -- Change error messages to be const
* -- Remove a "\t" which looks ugly in the syslogs
* 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
* since the .pdf version doesn't seem to work...
* -- Updated the TODO list to something more current.
*
* 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
* patch thanks to "Eddie C. Dost" <ecd@skynet.be>
*
* 4.50 Oct 19, 1998 -- New maintainers!
* Jens Axboe <axboe@image.dk>
* Chris Zwilling <chris@cloudnet.com>
*
* 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk>
* - ide_cdrom_reset enabled since the ide subsystem
* handles resets fine now. <axboe@image.dk>
* - Transfer size fix for Samsung CD-ROMs, thanks to
* "Ville Hallik" <ville.hallik@mail.ee>.
* - other minor stuff.
*
* 4.52 Jan 19, 1999 -- Jens Axboe <axboe@image.dk>
* - Detect DVD-ROM/RAM drives
*
* 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
* drive in transfer size limit.
* - Fix the I/O error when doing eject without a medium
* loaded on some drives.
* - CDROMREADMODE2 is now implemented through
* CDROMREADRAW, since many drives don't support
* MODE2 (even though ATAPI 2.6 says they must).
* - Added ignore parameter to ide-cd (as a module), eg
* insmod ide-cd ignore='hda hdb'
* Useful when using ide-cd in conjunction with
* ide-scsi. TODO: non-modular way of doing the
* same.
*
* 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
* packet interface to cdrom.c.
* - Unified audio ioctl support, most of it.
* - cleaned up various deprecated verify_area().
* - Added ide_cdrom_packet() as the interface for
* the Uniform generic_packet().
* - bunch of other stuff, will fill in logs later.
* - report 1 slot for non-changers, like the other
* cd-rom drivers. don't report select disc for
* non-changers as well.
* - mask out audio playing, if the device can't do it.
*
* 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except
* for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers
* use this independently of the actual audio handling.
* They will disappear later when I get the time to
* do it cleanly.
* - Minimize the TOC reading - only do it when we
* know a media change has occurred.
* - Moved all the CDROMREADx ioctls to the Uniform layer.
* - Heiko Eißfeldt <heiko@colossus.escape.de> supplied
* some fixes for CDI.
* - CD-ROM leaving door locked fix from Andries
* Brouwer <Andries.Brouwer@cwi.nl>
* - Erik Andersen <andersen@xmission.com> unified
* commands across the various drivers and how
* sense errors are handled.
*
* 4.56 Sep 12, 1999 - Removed changer support - it is now in the
* Uniform layer.
* - Added partition based multisession handling.
* - Mode sense and mode select moved to the
* Uniform layer.
* - Fixed a problem with WPI CDS-32X drive - it
* failed the capabilities
*
* 4.57 Apr 7, 2000 - Fixed sense reporting.
* - Fixed possible oops in ide_cdrom_get_last_session()
* - Fix locking mania and make ide_cdrom_reset relock
* - Stop spewing errors to log when magicdev polls with
* TEST_UNIT_READY on some drives.
* - Various fixes from Tobias Ringstrom:
* tray if it was locked prior to the reset.
* - cdrom_read_capacity returns one frame too little.
* - Fix real capacity reporting.
*
* 4.58 May 1, 2000 - Clean up ACER50 stuff.
* - Fix small problem with ide_cdrom_capacity
*
* 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't
* correctly sensing a disc change.
* - Rearranged some code
* - Use extended sense on drives that support it for
* correctly reporting tray status -- from
* Michael D Johnson <johnsom@orst.edu>
* 4.60 Dec 17, 2003 - Add mt rainier support
* - Bump timeout for packet commands, matches sr
* - Odd stuff
* 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB,
* Pascal Schmidt <der.eremit@email.de>
*/

63
Documentation/ide/ChangeLog.ide-floppy.1996-2002 Normal file
Просмотреть файл

@ -0,0 +1,63 @@
/*
* Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
* ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
*
* Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
* Ver 0.2 Oct 31 96 Minor changes.
* Ver 0.3 Dec 2 96 Fixed error recovery bug.
* Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
* Ver 0.5 Feb 21 97 Add partitions support.
* Use the minimum of the LBA and CHS capacities.
* Avoid hwgroup->rq == NULL on the last irq.
* Fix potential null dereferencing with DEBUG_LOG.
* Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
* Add media write-protect detection.
* Issue START command only if TEST UNIT READY fails.
* Add work-around for IOMEGA ZIP revision 21.D.
* Remove idefloppy_get_capabilities().
* Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
* bytes requested on each interrupt to be zero.
* Thanks to <shanos@es.co.nz> for pointing this out.
* Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@courier-mta.com>
* Implement low level formatting. Reimplemented
* IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
* bit. My LS-120 drive barfs on
* IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
* Compromise by not reporting a failure to get this
* mode page. Implemented four IOCTLs in order to
* implement formatting. IOCTls begin with 0x4600,
* 0x46 is 'F' as in Format.
* Jan 9 01 Userland option to select format verify.
* Added PC_SUPPRESS_ERROR flag - some idefloppy drives
* do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
* return a sense error. Suppress error reporting in
* this particular case in order to avoid spurious
* errors in syslog. The culprit is
* idefloppy_get_capability_page(), so move it to
* idefloppy_begin_format() so that it's not used
* unless absolutely necessary.
* If drive does not support format progress indication
* monitor the dsc bit in the status register.
* Also, O_NDELAY on open will allow the device to be
* opened without a disk available. This can be used to
* open an unformatted disk, or get the device capacity.
* Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
* <paul@paulbristow.net>
* Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
* driver. Included Powerbook internal zip kludge.
* Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
* no disk on insert and disk change now works
* Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
* Ver 0.95 Nov 7 00 Brought across to kernel 2.4
* Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
* including set_bit patch from Rusty Russell
* Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
* Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
* Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
* fix a lost interrupt problem. It appears the busy
* bit was being deasserted by my IOMEGA ATAPI ZIP 100
* drive before the drive was actually ready.
* Ver 0.98a Oct 29 01 Expose delay value so we can play.
* Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
* to support new PocketZip drives
*/

6
drivers/cdrom/cdrom.c
Просмотреть файл

@ -2787,12 +2787,6 @@ int cdrom_ioctl(struct file * file, struct cdrom_device_info *cdi,
return -ENOSYS;
}
static inline
int msf_to_lba(char m, char s, char f)
{
return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
}
/*
* Required when we need to use READ_10 to issue other than 2048 block
* reads

55
drivers/ide/Kconfig
Просмотреть файл

@ -206,6 +206,15 @@ config BLK_DEV_IDECD
To compile this driver as a module, choose M here: the
module will be called ide-cd.
config BLK_DEV_IDECD_VERBOSE_ERRORS
bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
depends on BLK_DEV_IDECD
default y
help
Turn this on to have the driver print out the meanings of the
ATAPI error codes. This will use up additional 8kB of kernel-space
memory, though.
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
depends on EXPERIMENTAL
@ -617,8 +626,8 @@ config BLK_DEV_SC1200
tristate "National SCx200 chipset support"
select BLK_DEV_IDEDMA_PCI
help
This driver adds support for the built in IDE on the National
SCx200 series of embedded x86 "Geode" systems
This driver adds support for the on-board IDE controller on the
National SCx200 series of embedded x86 "Geode" systems.
config BLK_DEV_PIIX
tristate "Intel PIIXn chipsets support"
@ -793,22 +802,22 @@ config BLK_DEV_CELLEB
depends on PPC_CELLEB
select BLK_DEV_IDEDMA_PCI
help
This driver provides support for the built-in IDE controller on
This driver provides support for the on-board IDE controller on
Toshiba Cell Reference Board.
If unsure, say Y.
endif
config BLK_DEV_IDE_PMAC
tristate "Builtin PowerMac IDE support"
tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
help
This driver provides support for the built-in IDE controller on
This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
If unsure, say Y.
config BLK_DEV_IDE_PMAC_ATA100FIRST
bool "Probe internal ATA/100 (Kauai) first"
bool "Probe on-board ATA/100 (Kauai) first"
depends on BLK_DEV_IDE_PMAC
help
This option will cause the ATA/100 controller found in UniNorth2
@ -823,7 +832,7 @@ config BLK_DEV_IDEDMA_PMAC
depends on BLK_DEV_IDE_PMAC
select BLK_DEV_IDEDMA_PCI
help
This option allows the driver for the built-in IDE controller on
This option allows the driver for the on-board IDE controller on
Power Macintoshes and PowerBooks to use DMA (direct memory access)
to transfer data to and from memory. Saying Y is safe and improves
performance.
@ -934,7 +943,7 @@ config BLK_DEV_GAYLE
help
This is the IDE driver for the Amiga Gayle IDE interface. It supports
both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
This includes builtin IDE interfaces on some Amiga models (A600,
This includes on-board IDE interfaces on some Amiga models (A600,
A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
bus (M-Tech E-Matrix 530 expansion card).
Say Y if you have an Amiga with a Gayle IDE interface and want to use
@ -948,10 +957,10 @@ config BLK_DEV_IDEDOUBLER
depends on BLK_DEV_GAYLE && EXPERIMENTAL
---help---
This driver provides support for the so-called `IDE doublers' (made
by various manufacturers, e.g. Eyetech) that can be connected to the
builtin IDE interface of some Amiga models. Using such an IDE
doubler, you can connect up to four instead of two IDE devices on
the Amiga's builtin IDE interface.
by various manufacturers, e.g. Eyetech) that can be connected to
the on-board IDE interface of some Amiga models. Using such an IDE
doubler, you can connect up to four instead of two IDE devices to
the Amiga's on-board IDE interface.
Note that the normal Amiga Gayle IDE driver may not work correctly
if you have an IDE doubler and don't enable this driver!
@ -963,9 +972,9 @@ config BLK_DEV_BUDDHA
tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
depends on ZORRO && EXPERIMENTAL
help
This is the IDE driver for the IDE interfaces on the Buddha,
Catweasel and X-Surf expansion boards. It supports up to two interfaces
on the Buddha, three on the Catweasel and two on the X-Surf.
This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
and X-Surf expansion boards. It supports up to two interfaces on the
Buddha, three on the Catweasel and two on the X-Surf.
Say Y if you have a Buddha or Catweasel expansion board and want to
use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
@ -975,23 +984,23 @@ config BLK_DEV_FALCON_IDE
tristate "Falcon IDE interface support"
depends on ATARI
help
This is the IDE driver for the builtin IDE interface on the Atari
This is the IDE driver for the on-board IDE interface on the Atari
Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
disks, CD-ROM drives, etc.) that are connected to the builtin IDE
disks, CD-ROM drives, etc.) that are connected to the on-board IDE
interface.
config BLK_DEV_MAC_IDE
tristate "Macintosh Quadra/Powerbook IDE interface support"
depends on MAC
help
This is the IDE driver for the builtin IDE interface on some m68k
This is the IDE driver for the on-board IDE interface on some m68k
Macintosh models. It supports both the `Quadra style' (used in
Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
(used in the Powerbook 150 and 190 models) IDE interface.
Say Y if you have such an Macintosh model and want to use IDE
devices (hard disks, CD-ROM drives, etc.) that are connected to the
builtin IDE interface.
on-board IDE interface.
config BLK_DEV_Q40IDE
tristate "Q40/Q60 IDE interface support"
@ -1062,8 +1071,8 @@ config BLK_DEV_ALI14XX
boot parameter. It enables support for the secondary IDE interface
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well. See the files
<file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> for
more info.
<file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
@ -1088,8 +1097,8 @@ config BLK_DEV_QD65XX
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
<file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
more info.
<file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
for more info.
config BLK_DEV_UMC8672
tristate "UMC-8672 support"

4
drivers/ide/Makefile
Просмотреть файл

@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o

3
drivers/ide/arm/bast-ide.c
Просмотреть файл

@ -1,5 +1,4 @@
/* linux/drivers/ide/arm/bast-ide.c
*
/*
* Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*

50
drivers/ide/arm/icside.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/arm/icside.c
*
* Copyright (c) 1996-2004 Russell King.
*
* Please note that this platform does not support 32-bit IDE IO.
@ -71,8 +69,6 @@ struct icside_state {
void __iomem *irq_port;
void __iomem *ioc_base;
unsigned int type;
/* parent device... until the IDE core gets one of its own */
struct device *dev;
ide_hwif_t *hwif[2];
};
@ -206,23 +202,6 @@ static void icside_maskproc(ide_drive_t *drive, int mask)
* interfaces use the same IRQ, which should guarantee this.
*/
static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
{
ide_hwif_t *hwif = drive->hwif;
struct icside_state *state = hwif->hwif_data;
struct scatterlist *sg = hwif->sg_table;
ide_map_sg(drive, rq);
if (rq_data_dir(rq) == READ)
hwif->sg_dma_direction = DMA_FROM_DEVICE;
else
hwif->sg_dma_direction = DMA_TO_DEVICE;
hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents,
hwif->sg_dma_direction);
}
/*
* Configure the IOMD to give the appropriate timings for the transfer
* mode being requested. We take the advice of the ATA standards, and
@ -294,33 +273,32 @@ static void icside_dma_host_set(ide_drive_t *drive, int on)
static int icside_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct icside_state *state = hwif->hwif_data;
struct expansion_card *ec = ECARD_DEV(hwif->dev);
drive->waiting_for_dma = 0;
disable_dma(ECARD_DEV(state->dev)->dma);
disable_dma(ec->dma);
/* Teardown mappings after DMA has completed. */
dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
ide_destroy_dmatable(drive);
return get_dma_residue(ECARD_DEV(state->dev)->dma) != 0;
return get_dma_residue(ec->dma) != 0;
}
static void icside_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct icside_state *state = hwif->hwif_data;
struct expansion_card *ec = ECARD_DEV(hwif->dev);
/* We can not enable DMA on both channels simultaneously. */
BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
enable_dma(ECARD_DEV(state->dev)->dma);
BUG_ON(dma_channel_active(ec->dma));
enable_dma(ec->dma);
}
static int icside_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct icside_state *state = hwif->hwif_data;
struct expansion_card *ec = ECARD_DEV(hwif->dev);
struct request *rq = hwif->hwgroup->rq;
unsigned int dma_mode;
@ -332,9 +310,9 @@ static int icside_dma_setup(ide_drive_t *drive)
/*
* We can not enable DMA on both channels.
*/
BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
BUG_ON(dma_channel_active(ec->dma));
icside_build_sglist(drive, rq);
hwif->sg_nents = ide_build_sglist(drive, rq);
/*
* Ensure that we have the right interrupt routed.
@ -349,14 +327,14 @@ static int icside_dma_setup(ide_drive_t *drive)
/*
* Select the correct timing for this drive.
*/
set_dma_speed(ECARD_DEV(state->dev)->dma, drive->drive_data);
set_dma_speed(ec->dma, drive->drive_data);
/*
* Tell the DMA engine about the SG table and
* data direction.
*/
set_dma_sg(ECARD_DEV(state->dev)->dma, hwif->sg_table, hwif->sg_nents);
set_dma_mode(ECARD_DEV(state->dev)->dma, dma_mode);
set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
set_dma_mode(ec->dma, dma_mode);
drive->waiting_for_dma = 1;
@ -444,6 +422,7 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e
hwif->noprobe = 0;
hwif->chipset = ide_acorn;
hwif->gendev.parent = &ec->dev;
hwif->dev = &ec->dev;
}
return hwif;
@ -591,7 +570,6 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id)
}
state->type = ICS_TYPE_NOTYPE;
state->dev = &ec->dev;
idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {

6
drivers/ide/arm/rapide.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/arm/rapide.c
*
* Copyright (c) 1996-2002 Russell King.
*/
@ -78,8 +76,8 @@ static void __devexit rapide_remove(struct expansion_card *ec)
ecard_set_drvdata(ec, NULL);
/* there must be a better way */
ide_unregister(hwif - ide_hwifs);
ide_unregister(hwif->index);
ecard_release_resources(ec);
}

3
drivers/ide/cris/ide-cris.c
Просмотреть файл

@ -1,5 +1,4 @@
/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $
*
/*
* Etrax specific IDE functions, like init and PIO-mode setting etc.
* Almost the entire ide.c is used for the rest of the Etrax ATA driver.
* Copyright (c) 2000-2005 Axis Communications AB

1
drivers/ide/h8300/ide-h8300.c
Просмотреть файл

@ -1,5 +1,4 @@
/*
* drivers/ide/h8300/ide-h8300.c
* H8/300 generic IDE interface
*/

1
drivers/ide/ide-acpi.c
Просмотреть файл

@ -1,5 +1,4 @@
/*
* ide-acpi.c
* Provides ACPI support for IDE drives.
*
* Copyright (C) 2005 Intel Corp.

2449
drivers/ide/ide-cd.c
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

700
drivers/ide/ide-cd.h
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/ide_cd.h
*
* Copyright (C) 1996-98 Erik Andersen
* Copyright (C) 1998-2000 Jens Axboe
*/
@ -10,31 +8,6 @@
#include <linux/cdrom.h>
#include <asm/byteorder.h>
/* Turn this on to have the driver print out the meanings of the
ATAPI error codes. This will use up additional kernel-space
memory, though. */
#ifndef VERBOSE_IDE_CD_ERRORS
#define VERBOSE_IDE_CD_ERRORS 1
#endif
/* Turning this on will remove code to work around various nonstandard
ATAPI implementations. If you know your drive follows the standard,
this will give you a slightly smaller kernel. */
#ifndef STANDARD_ATAPI
#define STANDARD_ATAPI 0
#endif
/* Turning this on will disable the door-locking functionality.
This is apparently needed for supermount. */
#ifndef NO_DOOR_LOCKING
#define NO_DOOR_LOCKING 0
#endif
/*
* typical timeout for packet command
*/
@ -49,67 +22,46 @@
#endif
#define SECTORS_PER_FRAME (CD_FRAMESIZE >> SECTOR_BITS)
#define SECTOR_BUFFER_SIZE (CD_FRAMESIZE * 32)
#define SECTORS_BUFFER (SECTOR_BUFFER_SIZE >> SECTOR_BITS)
#define SECTORS_MAX (131072 >> SECTOR_BITS)
#define BLOCKS_PER_FRAME (CD_FRAMESIZE / BLOCK_SIZE)
/* Capabilities Page size including 8 bytes of Mode Page Header */
#define ATAPI_CAPABILITIES_PAGE_SIZE (8 + 20)
#define ATAPI_CAPABILITIES_PAGE_PAD_SIZE 4
/* special command codes for strategy routine. */
#define PACKET_COMMAND 4315
#define REQUEST_SENSE_COMMAND 4316
#define RESET_DRIVE_COMMAND 4317
/* Configuration flags. These describe the capabilities of the drive.
They generally do not change after initialization, unless we learn
more about the drive from stuff failing. */
struct ide_cd_config_flags {
__u8 drq_interrupt : 1; /* Device sends an interrupt when ready
for a packet command. */
__u8 no_doorlock : 1; /* Drive cannot lock the door. */
__u8 no_eject : 1; /* Drive cannot eject the disc. */
__u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */
__u8 playmsf_as_bcd : 1; /* PLAYMSF command takes BCD args. */
__u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */
__u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */
__u8 subchan_as_bcd : 1; /* Subchannel info is in BCD. */
__u8 is_changer : 1; /* Drive is a changer. */
__u8 cd_r : 1; /* Drive can write to CD-R media . */
__u8 cd_rw : 1; /* Drive can write to CD-R/W media . */
__u8 dvd : 1; /* Drive is a DVD-ROM */
__u8 dvd_r : 1; /* Drive can write DVD-R */
__u8 dvd_ram : 1; /* Drive can write DVD-RAM */
__u8 ram : 1; /* generic WRITE (dvd-ram/mrw) */
__u8 test_write : 1; /* Drive can fake writes */
__u8 supp_disc_present : 1; /* Changer can report exact contents
of slots. */
__u8 limit_nframes : 1; /* Drive does not provide data in
multiples of SECTOR_SIZE when more
than one interrupt is needed. */
__u8 seeking : 1; /* Seeking in progress */
__u8 audio_play : 1; /* can do audio related commands */
__u8 close_tray : 1; /* can close the tray */
__u8 writing : 1; /* pseudo write in progress */
__u8 mo_drive : 1; /* drive is an MO device */
__u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */
__u8 reserved : 1;
byte max_speed; /* Max speed of the drive */
enum {
/* Device sends an interrupt when ready for a packet command. */
IDE_CD_FLAG_DRQ_INTERRUPT = (1 << 0),
/* Drive cannot lock the door. */
IDE_CD_FLAG_NO_DOORLOCK = (1 << 1),
/* Drive cannot eject the disc. */
IDE_CD_FLAG_NO_EJECT = (1 << 2),
/* Drive is a pre ATAPI 1.2 drive. */
IDE_CD_FLAG_PRE_ATAPI12 = (1 << 3),
/* TOC addresses are in BCD. */
IDE_CD_FLAG_TOCADDR_AS_BCD = (1 << 4),
/* TOC track numbers are in BCD. */
IDE_CD_FLAG_TOCTRACKS_AS_BCD = (1 << 5),
/*
* Drive does not provide data in multiples of SECTOR_SIZE
* when more than one interrupt is needed.
*/
IDE_CD_FLAG_LIMIT_NFRAMES = (1 << 6),
/* Seeking in progress. */
IDE_CD_FLAG_SEEKING = (1 << 7),
/* Driver has noticed a media change. */
IDE_CD_FLAG_MEDIA_CHANGED = (1 << 8),
/* Saved TOC information is current. */
IDE_CD_FLAG_TOC_VALID = (1 << 9),
/* We think that the drive door is locked. */
IDE_CD_FLAG_DOOR_LOCKED = (1 << 10),
/* SET_CD_SPEED command is unsupported. */
IDE_CD_FLAG_NO_SPEED_SELECT = (1 << 11),
IDE_CD_FLAG_VERTOS_300_SSD = (1 << 12),
IDE_CD_FLAG_VERTOS_600_ESD = (1 << 13),
IDE_CD_FLAG_SANYO_3CD = (1 << 14),
IDE_CD_FLAG_FULL_CAPS_PAGE = (1 << 15),
IDE_CD_FLAG_PLAY_AUDIO_OK = (1 << 16),
IDE_CD_FLAG_LE_SPEED_FIELDS = (1 << 17),
};
#define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags))
/* State flags. These give information about the current state of the
drive, and will change during normal operation. */
struct ide_cd_state_flags {
__u8 media_changed : 1; /* Driver has noticed a media change. */
__u8 toc_valid : 1; /* Saved TOC information is current. */
__u8 door_locked : 1; /* We think that the drive door is locked. */
__u8 writing : 1; /* the drive is currently writing */
__u8 reserved : 4;
byte current_speed; /* Current speed of the drive */
};
#define CDROM_STATE_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->state_flags))
/* Structure of a MSF cdrom address. */
struct atapi_msf {
@ -155,310 +107,6 @@ struct atapi_toc {
/* One extra for the leadout. */
};
/* This structure is annoyingly close to, but not identical with,
the cdrom_subchnl structure from cdrom.h. */
struct atapi_cdrom_subchnl {
u_char acdsc_reserved;
u_char acdsc_audiostatus;
u_short acdsc_length;
u_char acdsc_format;
#if defined(__BIG_ENDIAN_BITFIELD)
u_char acdsc_ctrl: 4;
u_char acdsc_adr: 4;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
u_char acdsc_adr: 4;
u_char acdsc_ctrl: 4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
u_char acdsc_trk;
u_char acdsc_ind;
union {
struct atapi_msf msf;
int lba;
} acdsc_absaddr;
union {
struct atapi_msf msf;
int lba;
} acdsc_reladdr;
};
/* This should probably go into cdrom.h along with the other
* generic stuff now in the Mt. Fuji spec.
*/
struct atapi_capabilities_page {
struct mode_page_header header;
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 parameters_saveable : 1;
__u8 reserved1 : 1;
__u8 page_code : 6;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 page_code : 6;
__u8 reserved1 : 1;
__u8 parameters_saveable : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
byte page_length;
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved2 : 2;
/* Drive supports reading of DVD-RAM discs */
__u8 dvd_ram_read : 1;
/* Drive supports reading of DVD-R discs */
__u8 dvd_r_read : 1;
/* Drive supports reading of DVD-ROM discs */
__u8 dvd_rom : 1;
/* Drive supports reading CD-R discs with addressing method 2 */
__u8 method2 : 1; /* reserved in 1.2 */
/* Drive can read from CD-R/W (CD-E) discs (orange book, part III) */
__u8 cd_rw_read : 1; /* reserved in 1.2 */
/* Drive supports read from CD-R discs (orange book, part II) */
__u8 cd_r_read : 1; /* reserved in 1.2 */
#elif defined(__LITTLE_ENDIAN_BITFIELD)
/* Drive supports read from CD-R discs (orange book, part II) */
__u8 cd_r_read : 1; /* reserved in 1.2 */
/* Drive can read from CD-R/W (CD-E) discs (orange book, part III) */
__u8 cd_rw_read : 1; /* reserved in 1.2 */
/* Drive supports reading CD-R discs with addressing method 2 */
__u8 method2 : 1;
/* Drive supports reading of DVD-ROM discs */
__u8 dvd_rom : 1;
/* Drive supports reading of DVD-R discs */
__u8 dvd_r_read : 1;
/* Drive supports reading of DVD-RAM discs */
__u8 dvd_ram_read : 1;
__u8 reserved2 : 2;
#else
#error "Please fix <asm/byteorder.h>"
#endif
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved3 : 2;
/* Drive can write DVD-RAM discs */
__u8 dvd_ram_write : 1;
/* Drive can write DVD-R discs */
__u8 dvd_r_write : 1;
__u8 reserved3a : 1;
/* Drive can fake writes */
__u8 test_write : 1;
/* Drive can write to CD-R/W (CD-E) discs (orange book, part III) */
__u8 cd_rw_write : 1; /* reserved in 1.2 */
/* Drive supports write to CD-R discs (orange book, part II) */
__u8 cd_r_write : 1; /* reserved in 1.2 */
#elif defined(__LITTLE_ENDIAN_BITFIELD)
/* Drive can write to CD-R discs (orange book, part II) */
__u8 cd_r_write : 1; /* reserved in 1.2 */
/* Drive can write to CD-R/W (CD-E) discs (orange book, part III) */
__u8 cd_rw_write : 1; /* reserved in 1.2 */
/* Drive can fake writes */
__u8 test_write : 1;
__u8 reserved3a : 1;
/* Drive can write DVD-R discs */
__u8 dvd_r_write : 1;
/* Drive can write DVD-RAM discs */
__u8 dvd_ram_write : 1;
__u8 reserved3 : 2;
#else
#error "Please fix <asm/byteorder.h>"
#endif
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved4 : 1;
/* Drive can read multisession discs. */
__u8 multisession : 1;
/* Drive can read mode 2, form 2 data. */
__u8 mode2_form2 : 1;
/* Drive can read mode 2, form 1 (XA) data. */
__u8 mode2_form1 : 1;
/* Drive supports digital output on port 2. */
__u8 digport2 : 1;
/* Drive supports digital output on port 1. */
__u8 digport1 : 1;
/* Drive can deliver a composite audio/video data stream. */
__u8 composite : 1;
/* Drive supports audio play operations. */
__u8 audio_play : 1;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
/* Drive supports audio play operations. */
__u8 audio_play : 1;
/* Drive can deliver a composite audio/video data stream. */
__u8 composite : 1;
/* Drive supports digital output on port 1. */
__u8 digport1 : 1;
/* Drive supports digital output on port 2. */
__u8 digport2 : 1;
/* Drive can read mode 2, form 1 (XA) data. */
__u8 mode2_form1 : 1;
/* Drive can read mode 2, form 2 data. */
__u8 mode2_form2 : 1;
/* Drive can read multisession discs. */
__u8 multisession : 1;
__u8 reserved4 : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved5 : 1;
/* Drive can return Media Catalog Number (UPC) info. */
__u8 upc : 1;
/* Drive can return International Standard Recording Code info. */
__u8 isrc : 1;
/* Drive supports C2 error pointers. */
__u8 c2_pointers : 1;
/* R-W data will be returned deinterleaved and error corrected. */
__u8 rw_corr : 1;
/* Subchannel reads can return combined R-W information. */
__u8 rw_supported : 1;
/* Drive can continue a read cdda operation from a loss of streaming.*/
__u8 cdda_accurate : 1;
/* Drive can read Red Book audio data. */
__u8 cdda : 1;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
/* Drive can read Red Book audio data. */
__u8 cdda : 1;
/* Drive can continue a read cdda operation from a loss of streaming.*/
__u8 cdda_accurate : 1;
/* Subchannel reads can return combined R-W information. */
__u8 rw_supported : 1;
/* R-W data will be returned deinterleaved and error corrected. */
__u8 rw_corr : 1;
/* Drive supports C2 error pointers. */
__u8 c2_pointers : 1;
/* Drive can return International Standard Recording Code info. */
__u8 isrc : 1;
/* Drive can return Media Catalog Number (UPC) info. */
__u8 upc : 1;
__u8 reserved5 : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
#if defined(__BIG_ENDIAN_BITFIELD)
/* Drive mechanism types. */
mechtype_t mechtype : 3;
__u8 reserved6 : 1;
/* Drive can eject a disc or changer cartridge. */
__u8 eject : 1;
/* State of prevent/allow jumper. */
__u8 prevent_jumper : 1;
/* Present state of door lock. */
__u8 lock_state : 1;
/* Drive can lock the door. */
__u8 lock : 1;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
/* Drive can lock the door. */
__u8 lock : 1;
/* Present state of door lock. */
__u8 lock_state : 1;
/* State of prevent/allow jumper. */
__u8 prevent_jumper : 1;
/* Drive can eject a disc or changer cartridge. */
__u8 eject : 1;
__u8 reserved6 : 1;
/* Drive mechanism types. */
mechtype_t mechtype : 3;
#else
#error "Please fix <asm/byteorder.h>"
#endif
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 reserved7 : 4;
/* Drive supports software slot selection. */
__u8 sss : 1; /* reserved in 1.2 */
/* Changer can report exact contents of slots. */
__u8 disc_present : 1; /* reserved in 1.2 */
/* Audio for each channel can be muted independently. */
__u8 separate_mute : 1;
/* Audio level for each channel can be controlled independently. */
__u8 separate_volume : 1;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
/* Audio level for each channel can be controlled independently. */
__u8 separate_volume : 1;
/* Audio for each channel can be muted independently. */
__u8 separate_mute : 1;
/* Changer can report exact contents of slots. */
__u8 disc_present : 1; /* reserved in 1.2 */
/* Drive supports software slot selection. */
__u8 sss : 1; /* reserved in 1.2 */
__u8 reserved7 : 4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
/* Note: the following four fields are returned in big-endian form. */
/* Maximum speed (in kB/s). */
unsigned short maxspeed;
/* Number of discrete volume levels. */
unsigned short n_vol_levels;
/* Size of cache in drive, in kB. */
unsigned short buffer_size;
/* Current speed (in kB/s). */
unsigned short curspeed;
char pad[4];
};
struct atapi_mechstat_header {
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 fault : 1;
__u8 changer_state : 2;
__u8 curslot : 5;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 curslot : 5;
__u8 changer_state : 2;
__u8 fault : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 mech_state : 3;
__u8 door_open : 1;
__u8 reserved1 : 4;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 reserved1 : 4;
__u8 door_open : 1;
__u8 mech_state : 3;
#else
#error "Please fix <asm/byteorder.h>"
#endif
byte curlba[3];
byte nslots;
__u16 slot_tablelen;
};
struct atapi_slot {
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 disc_present : 1;
__u8 reserved1 : 6;
__u8 change : 1;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 change : 1;
__u8 reserved1 : 6;
__u8 disc_present : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
byte reserved2[3];
};
struct atapi_changer_info {
struct atapi_mechstat_header hdr;
struct atapi_slot slots[0];
};
/* Extra per-device info for cdrom drives. */
struct cdrom_info {
ide_drive_t *drive;
@ -483,11 +131,11 @@ struct cdrom_info {
int dma;
unsigned long last_block;
unsigned long start_seek;
/* Buffer to hold mechanism status and changer slot table. */
struct atapi_changer_info *changer_info;
struct ide_cd_config_flags config_flags;
struct ide_cd_state_flags state_flags;
unsigned int cd_flags;
u8 max_speed; /* Max speed of the drive. */
u8 current_speed; /* Current speed of the drive. */
/* Per-device info needed by cdrom.c generic driver. */
struct cdrom_device_info devinfo;
@ -495,250 +143,30 @@ struct cdrom_info {
unsigned long write_timeout;
};
/****************************************************************************
* Descriptions of ATAPI error codes.
*/
/* ide-cd_verbose.c */
void ide_cd_log_error(const char *, struct request *, struct request_sense *);
/* This stuff should be in cdrom.h, since it is now generic... */
/* ATAPI sense keys (from table 140 of ATAPI 2.6) */
#define NO_SENSE 0x00
#define RECOVERED_ERROR 0x01
#define NOT_READY 0x02
#define MEDIUM_ERROR 0x03
#define HARDWARE_ERROR 0x04
#define ILLEGAL_REQUEST 0x05
#define UNIT_ATTENTION 0x06
#define DATA_PROTECT 0x07
#define BLANK_CHECK 0x08
#define ABORTED_COMMAND 0x0b
#define MISCOMPARE 0x0e
/* This stuff should be in cdrom.h, since it is now generic... */
#if VERBOSE_IDE_CD_ERRORS
/* The generic packet command opcodes for CD/DVD Logical Units,
* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
static const struct {
unsigned short packet_command;
const char * const text;
} packet_command_texts[] = {
{ GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
{ GPCMD_REQUEST_SENSE, "Request Sense" },
{ GPCMD_FORMAT_UNIT, "Format Unit" },
{ GPCMD_INQUIRY, "Inquiry" },
{ GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
{ GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
{ GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
{ GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
{ GPCMD_READ_10, "Read 10" },
{ GPCMD_WRITE_10, "Write 10" },
{ GPCMD_SEEK, "Seek" },
{ GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
{ GPCMD_VERIFY_10, "Verify 10" },
{ GPCMD_FLUSH_CACHE, "Flush Cache" },
{ GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
{ GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
{ GPCMD_READ_HEADER, "Read Header" },
{ GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
{ GPCMD_GET_CONFIGURATION, "Get Configuration" },
{ GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
{ GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
{ GPCMD_GET_EVENT_STATUS_NOTIFICATION, "Get Event Status Notification" },
{ GPCMD_PAUSE_RESUME, "Pause/Resume" },
{ GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
{ GPCMD_READ_DISC_INFO, "Read Disc Info" },
{ GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
{ GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
{ GPCMD_SEND_OPC, "Send OPC" },
{ GPCMD_MODE_SELECT_10, "Mode Select 10" },
{ GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
{ GPCMD_MODE_SENSE_10, "Mode Sense 10" },
{ GPCMD_CLOSE_TRACK, "Close Track" },
{ GPCMD_BLANK, "Blank" },
{ GPCMD_SEND_EVENT, "Send Event" },
{ GPCMD_SEND_KEY, "Send Key" },
{ GPCMD_REPORT_KEY, "Report Key" },
{ GPCMD_LOAD_UNLOAD, "Load/Unload" },
{ GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
{ GPCMD_READ_12, "Read 12" },
{ GPCMD_GET_PERFORMANCE, "Get Performance" },
{ GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
{ GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
{ GPCMD_SET_STREAMING, "Set Streaming" },
{ GPCMD_READ_CD_MSF, "Read CD MSF" },
{ GPCMD_SCAN, "Scan" },
{ GPCMD_SET_SPEED, "Set Speed" },
{ GPCMD_PLAY_CD, "Play CD" },
{ GPCMD_MECHANISM_STATUS, "Mechanism Status" },
{ GPCMD_READ_CD, "Read CD" },
};
/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
static const char * const sense_key_texts[16] = {
"No sense data",
"Recovered error",
"Not ready",
"Medium error",
"Hardware error",
"Illegal request",
"Unit attention",
"Data protect",
"Blank check",
"(reserved)",
"(reserved)",
"Aborted command",
"(reserved)",
"(reserved)",
"Miscompare",
"(reserved)",
};
/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
static const struct {
unsigned long asc_ascq;
const char * const text;
} sense_data_texts[] = {
{ 0x000000, "No additional sense information" },
{ 0x000011, "Play operation in progress" },
{ 0x000012, "Play operation paused" },
{ 0x000013, "Play operation successfully completed" },
{ 0x000014, "Play operation stopped due to error" },
{ 0x000015, "No current audio status to return" },
{ 0x010c0a, "Write error - padding blocks added" },
{ 0x011700, "Recovered data with no error correction applied" },
{ 0x011701, "Recovered data with retries" },
{ 0x011702, "Recovered data with positive head offset" },
{ 0x011703, "Recovered data with negative head offset" },
{ 0x011704, "Recovered data with retries and/or CIRC applied" },
{ 0x011705, "Recovered data using previous sector ID" },
{ 0x011800, "Recovered data with error correction applied" },
{ 0x011801, "Recovered data with error correction and retries applied"},
{ 0x011802, "Recovered data - the data was auto-reallocated" },
{ 0x011803, "Recovered data with CIRC" },
{ 0x011804, "Recovered data with L-EC" },
{ 0x015d00,
"Failure prediction threshold exceeded - Predicted logical unit failure" },
{ 0x015d01,
"Failure prediction threshold exceeded - Predicted media failure" },
{ 0x015dff, "Failure prediction threshold exceeded - False" },
{ 0x017301, "Power calibration area almost full" },
{ 0x020400, "Logical unit not ready - cause not reportable" },
/* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
{ 0x020401,
"Logical unit not ready - in progress [sic] of becoming ready" },
{ 0x020402, "Logical unit not ready - initializing command required" },
{ 0x020403, "Logical unit not ready - manual intervention required" },
{ 0x020404, "Logical unit not ready - format in progress" },
{ 0x020407, "Logical unit not ready - operation in progress" },
{ 0x020408, "Logical unit not ready - long write in progress" },
{ 0x020600, "No reference position found (media may be upside down)" },
{ 0x023000, "Incompatible medium installed" },
{ 0x023a00, "Medium not present" },
{ 0x025300, "Media load or eject failed" },
{ 0x025700, "Unable to recover table of contents" },
{ 0x030300, "Peripheral device write fault" },
{ 0x030301, "No write current" },
{ 0x030302, "Excessive write errors" },
{ 0x030c00, "Write error" },
{ 0x030c01, "Write error - Recovered with auto reallocation" },
{ 0x030c02, "Write error - auto reallocation failed" },
{ 0x030c03, "Write error - recommend reassignment" },
{ 0x030c04, "Compression check miscompare error" },
{ 0x030c05, "Data expansion occurred during compress" },
{ 0x030c06, "Block not compressible" },
{ 0x030c07, "Write error - recovery needed" },
{ 0x030c08, "Write error - recovery failed" },
{ 0x030c09, "Write error - loss of streaming" },
{ 0x031100, "Unrecovered read error" },
{ 0x031106, "CIRC unrecovered error" },
{ 0x033101, "Format command failed" },
{ 0x033200, "No defect spare location available" },
{ 0x033201, "Defect list update failure" },
{ 0x035100, "Erase failure" },
{ 0x037200, "Session fixation error" },
{ 0x037201, "Session fixation error writin lead-in" },
{ 0x037202, "Session fixation error writin lead-out" },
{ 0x037300, "CD control error" },
{ 0x037302, "Power calibration area is full" },
{ 0x037303, "Power calibration area error" },
{ 0x037304, "Program memory area / RMA update failure" },
{ 0x037305, "Program memory area / RMA is full" },
{ 0x037306, "Program memory area / RMA is (almost) full" },
{ 0x040200, "No seek complete" },
{ 0x040300, "Write fault" },
{ 0x040900, "Track following error" },
{ 0x040901, "Tracking servo failure" },
{ 0x040902, "Focus servo failure" },
{ 0x040903, "Spindle servo failure" },
{ 0x041500, "Random positioning error" },
{ 0x041501, "Mechanical positioning or changer error" },
{ 0x041502, "Positioning error detected by read of medium" },
{ 0x043c00, "Mechanical positioning or changer error" },
{ 0x044000, "Diagnostic failure on component (ASCQ)" },
{ 0x044400, "Internal CD/DVD logical unit failure" },
{ 0x04b600, "Media load mechanism failed" },
{ 0x051a00, "Parameter list length error" },
{ 0x052000, "Invalid command operation code" },
{ 0x052100, "Logical block address out of range" },
{ 0x052102, "Invalid address for write" },
{ 0x052400, "Invalid field in command packet" },
{ 0x052600, "Invalid field in parameter list" },
{ 0x052601, "Parameter not supported" },
{ 0x052602, "Parameter value invalid" },
{ 0x052700, "Write protected media" },
{ 0x052c00, "Command sequence error" },
{ 0x052c03, "Current program area is not empty" },
{ 0x052c04, "Current program area is empty" },
{ 0x053001, "Cannot read medium - unknown format" },
{ 0x053002, "Cannot read medium - incompatible format" },
{ 0x053900, "Saving parameters not supported" },
{ 0x054e00, "Overlapped commands attempted" },
{ 0x055302, "Medium removal prevented" },
{ 0x055500, "System resource failure" },
{ 0x056300, "End of user area encountered on this track" },
{ 0x056400, "Illegal mode for this track or incompatible medium" },
{ 0x056f00, "Copy protection key exchange failure - Authentication failure" },
{ 0x056f01, "Copy protection key exchange failure - Key not present" },
{ 0x056f02, "Copy protection key exchange failure - Key not established" },
{ 0x056f03, "Read of scrambled sector without authentication" },
{ 0x056f04, "Media region code is mismatched to logical unit" },
{ 0x056f05, "Drive region must be permanent / region reset count error" },
{ 0x057203, "Session fixation error - incomplete track in session" },
{ 0x057204, "Empty or partially written reserved track" },
{ 0x057205, "No more RZONE reservations are allowed" },
{ 0x05bf00, "Loss of streaming" },
{ 0x062800, "Not ready to ready transition, medium may have changed" },
{ 0x062900, "Power on, reset or hardware reset occurred" },
{ 0x062a00, "Parameters changed" },
{ 0x062a01, "Mode parameters changed" },
{ 0x062e00, "Insufficient time for operation" },
{ 0x063f00, "Logical unit operating conditions have changed" },
{ 0x063f01, "Microcode has been changed" },
{ 0x065a00, "Operator request or state change input (unspecified)" },
{ 0x065a01, "Operator medium removal request" },
{ 0x0bb900, "Play operation aborted" },
/* Here we use 0xff for the key (not a valid key) to signify
* that these can have _any_ key value associated with them... */
{ 0xff0401, "Logical unit is in process of becoming ready" },
{ 0xff0400, "Logical unit not ready, cause not reportable" },
{ 0xff0402, "Logical unit not ready, initializing command required" },
{ 0xff0403, "Logical unit not ready, manual intervention required" },
{ 0xff0500, "Logical unit does not respond to selection" },
{ 0xff0800, "Logical unit communication failure" },
{ 0xff0802, "Logical unit communication parity error" },
{ 0xff0801, "Logical unit communication time-out" },
{ 0xff2500, "Logical unit not supported" },
{ 0xff4c00, "Logical unit failed self-configuration" },
{ 0xff3e00, "Logical unit has not self-configured yet" },
};
#endif
/* ide-cd.c functions used by ide-cd_ioctl.c */
void ide_cd_init_rq(ide_drive_t *, struct request *);
int ide_cd_queue_pc(ide_drive_t *, struct request *);
int ide_cd_read_toc(ide_drive_t *, struct request_sense *);
int ide_cdrom_get_capabilities(ide_drive_t *, u8 *);
void ide_cdrom_update_speed(ide_drive_t *, u8 *);
int cdrom_check_status(ide_drive_t *, struct request_sense *);
/* ide-cd_ioctl.c */
int ide_cdrom_open_real(struct cdrom_device_info *, int);
void ide_cdrom_release_real(struct cdrom_device_info *);
int ide_cdrom_drive_status(struct cdrom_device_info *, int);
int ide_cdrom_check_media_change_real(struct cdrom_device_info *, int);
int ide_cdrom_tray_move(struct cdrom_device_info *, int);
int ide_cdrom_lock_door(struct cdrom_device_info *, int);
int ide_cdrom_select_speed(struct cdrom_device_info *, int);
int ide_cdrom_get_last_session(struct cdrom_device_info *,
struct cdrom_multisession *);
int ide_cdrom_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *);
int ide_cdrom_reset(struct cdrom_device_info *cdi);
int ide_cdrom_audio_ioctl(struct cdrom_device_info *, unsigned int, void *);
int ide_cdrom_packet(struct cdrom_device_info *, struct packet_command *);
#endif /* _IDE_CD_H */

475
drivers/ide/ide-cd_ioctl.c Normal file
Просмотреть файл

@ -0,0 +1,475 @@
/*
* cdrom.c IOCTLs handling for ide-cd driver.
*
* Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
* Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
* Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
*/
#include <linux/kernel.h>
#include <linux/cdrom.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
#include "ide-cd.h"
/****************************************************************************
* Other driver requests (open, close, check media change).
*/
int ide_cdrom_open_real(struct cdrom_device_info *cdi, int purpose)
{
return 0;
}
/*
* Close down the device. Invalidate all cached blocks.
*/
void ide_cdrom_release_real(struct cdrom_device_info *cdi)
{
ide_drive_t *drive = cdi->handle;
struct cdrom_info *cd = drive->driver_data;
if (!cdi->use_count)
cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID;
}
/*
* add logic to try GET_EVENT command first to check for media and tray
* status. this should be supported by newer cd-r/w and all DVD etc
* drives
*/
int ide_cdrom_drive_status(struct cdrom_device_info *cdi, int slot_nr)
{
ide_drive_t *drive = cdi->handle;
struct media_event_desc med;
struct request_sense sense;
int stat;
if (slot_nr != CDSL_CURRENT)
return -EINVAL;
stat = cdrom_check_status(drive, &sense);
if (!stat || sense.sense_key == UNIT_ATTENTION)
return CDS_DISC_OK;
if (!cdrom_get_media_event(cdi, &med)) {
if (med.media_present)
return CDS_DISC_OK;
else if (med.door_open)
return CDS_TRAY_OPEN;
else
return CDS_NO_DISC;
}
if (sense.sense_key == NOT_READY && sense.asc == 0x04
&& sense.ascq == 0x04)
return CDS_DISC_OK;
/*
* If not using Mt Fuji extended media tray reports,
* just return TRAY_OPEN since ATAPI doesn't provide
* any other way to detect this...
*/
if (sense.sense_key == NOT_READY) {
if (sense.asc == 0x3a && sense.ascq == 1)
return CDS_NO_DISC;
else
return CDS_TRAY_OPEN;
}
return CDS_DRIVE_NOT_READY;
}
int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi,
int slot_nr)
{
ide_drive_t *drive = cdi->handle;
struct cdrom_info *cd = drive->driver_data;
int retval;
if (slot_nr == CDSL_CURRENT) {
(void) cdrom_check_status(drive, NULL);
retval = (cd->cd_flags & IDE_CD_FLAG_MEDIA_CHANGED) ? 1 : 0;
cd->cd_flags &= ~IDE_CD_FLAG_MEDIA_CHANGED;
return retval;
} else {
return -EINVAL;
}
}
/* Eject the disk if EJECTFLAG is 0.
If EJECTFLAG is 1, try to reload the disk. */
static
int cdrom_eject(ide_drive_t *drive, int ejectflag,
struct request_sense *sense)
{
struct cdrom_info *cd = drive->driver_data;
struct cdrom_device_info *cdi = &cd->devinfo;
struct request req;
char loej = 0x02;
if ((cd->cd_flags & IDE_CD_FLAG_NO_EJECT) && !ejectflag)
return -EDRIVE_CANT_DO_THIS;
/* reload fails on some drives, if the tray is locked */
if ((cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED) && ejectflag)
return 0;
ide_cd_init_rq(drive, &req);
/* only tell drive to close tray if open, if it can do that */
if (ejectflag && (cdi->mask & CDC_CLOSE_TRAY))
loej = 0;
req.sense = sense;
req.cmd[0] = GPCMD_START_STOP_UNIT;
req.cmd[4] = loej | (ejectflag != 0);
return ide_cd_queue_pc(drive, &req);
}
/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
static
int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
struct request_sense *sense)
{
struct cdrom_info *cd = drive->driver_data;
struct request_sense my_sense;
struct request req;
int stat;
if (sense == NULL)
sense = &my_sense;
/* If the drive cannot lock the door, just pretend. */
if (cd->cd_flags & IDE_CD_FLAG_NO_DOORLOCK) {
stat = 0;
} else {
ide_cd_init_rq(drive, &req);
req.sense = sense;
req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
req.cmd[4] = lockflag ? 1 : 0;
stat = ide_cd_queue_pc(drive, &req);
}
/* If we got an illegal field error, the drive
probably cannot lock the door. */
if (stat != 0 &&
sense->sense_key == ILLEGAL_REQUEST &&
(sense->asc == 0x24 || sense->asc == 0x20)) {
printk(KERN_ERR "%s: door locking not supported\n",
drive->name);
cd->cd_flags |= IDE_CD_FLAG_NO_DOORLOCK;
stat = 0;
}
/* no medium, that's alright. */
if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a)
stat = 0;
if (stat == 0) {
if (lockflag)
cd->cd_flags |= IDE_CD_FLAG_DOOR_LOCKED;
else
cd->cd_flags &= ~IDE_CD_FLAG_DOOR_LOCKED;
}
return stat;
}
int ide_cdrom_tray_move(struct cdrom_device_info *cdi, int position)
{
ide_drive_t *drive = cdi->handle;
struct request_sense sense;
if (position) {
int stat = ide_cd_lockdoor(drive, 0, &sense);
if (stat)
return stat;
}
return cdrom_eject(drive, !position, &sense);
}
int ide_cdrom_lock_door(struct cdrom_device_info *cdi, int lock)
{
ide_drive_t *drive = cdi->handle;
return ide_cd_lockdoor(drive, lock, NULL);
}
/*
* ATAPI devices are free to select the speed you request or any slower
* rate. :-( Requesting too fast a speed will _not_ produce an error.
*/
int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed)
{
ide_drive_t *drive = cdi->handle;
struct cdrom_info *cd = drive->driver_data;
struct request rq;
struct request_sense sense;
u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE];
int stat;
ide_cd_init_rq(drive, &rq);
rq.sense = &sense;
if (speed == 0)
speed = 0xffff; /* set to max */
else
speed *= 177; /* Nx to kbytes/s */
rq.cmd[0] = GPCMD_SET_SPEED;
/* Read Drive speed in kbytes/second MSB/LSB */
rq.cmd[2] = (speed >> 8) & 0xff;
rq.cmd[3] = speed & 0xff;
if ((cdi->mask & (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) !=
(CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) {
/* Write Drive speed in kbytes/second MSB/LSB */
rq.cmd[4] = (speed >> 8) & 0xff;
rq.cmd[5] = speed & 0xff;
}
stat = ide_cd_queue_pc(drive, &rq);
if (!ide_cdrom_get_capabilities(drive, buf)) {
ide_cdrom_update_speed(drive, buf);
cdi->speed = cd->current_speed;
}
return 0;
}
int ide_cdrom_get_last_session(struct cdrom_device_info *cdi,
struct cdrom_multisession *ms_info)
{
struct atapi_toc *toc;
ide_drive_t *drive = cdi->handle;
struct cdrom_info *info = drive->driver_data;
struct request_sense sense;
int ret;
if ((info->cd_flags & IDE_CD_FLAG_TOC_VALID) == 0 || !info->toc) {
ret = ide_cd_read_toc(drive, &sense);
if (ret)
return ret;
}
toc = info->toc;
ms_info->addr.lba = toc->last_session_lba;
ms_info->xa_flag = toc->xa_flag;
return 0;
}
int ide_cdrom_get_mcn(struct cdrom_device_info *cdi,
struct cdrom_mcn *mcn_info)
{
ide_drive_t *drive = cdi->handle;
int stat, mcnlen;
struct request rq;
char buf[24];
ide_cd_init_rq(drive, &rq);
rq.data = buf;
rq.data_len = sizeof(buf);
rq.cmd[0] = GPCMD_READ_SUBCHANNEL;
rq.cmd[1] = 2; /* MSF addressing */
rq.cmd[2] = 0x40; /* request subQ data */
rq.cmd[3] = 2; /* format */
rq.cmd[8] = sizeof(buf);
stat = ide_cd_queue_pc(drive, &rq);
if (stat)
return stat;
mcnlen = sizeof(mcn_info->medium_catalog_number) - 1;
memcpy(mcn_info->medium_catalog_number, buf + 9, mcnlen);
mcn_info->medium_catalog_number[mcnlen] = '\0';
return 0;
}
int ide_cdrom_reset(struct cdrom_device_info *cdi)
{
ide_drive_t *drive = cdi->handle;
struct cdrom_info *cd = drive->driver_data;
struct request_sense sense;
struct request req;
int ret;
ide_cd_init_rq(drive, &req);
req.cmd_type = REQ_TYPE_SPECIAL;
req.cmd_flags = REQ_QUIET;
ret = ide_do_drive_cmd(drive, &req, ide_wait);
/*
* A reset will unlock the door. If it was previously locked,
* lock it again.
*/
if (cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED)
(void)ide_cd_lockdoor(drive, 1, &sense);
return ret;
}
static int ide_cd_get_toc_entry(ide_drive_t *drive, int track,
struct atapi_toc_entry **ent)
{
struct cdrom_info *info = drive->driver_data;
struct atapi_toc *toc = info->toc;
int ntracks;
/*
* don't serve cached data, if the toc isn't valid
*/
if ((info->cd_flags & IDE_CD_FLAG_TOC_VALID) == 0)
return -EINVAL;
/* Check validity of requested track number. */
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
if (toc->hdr.first_track == CDROM_LEADOUT)
ntracks = 0;
if (track == CDROM_LEADOUT)
*ent = &toc->ent[ntracks];
else if (track < toc->hdr.first_track || track > toc->hdr.last_track)
return -EINVAL;
else
*ent = &toc->ent[track - toc->hdr.first_track];
return 0;
}
static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg)
{
struct cdrom_ti *ti = arg;
struct atapi_toc_entry *first_toc, *last_toc;
unsigned long lba_start, lba_end;
int stat;
struct request rq;
struct request_sense sense;
stat = ide_cd_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
if (stat)
return stat;
stat = ide_cd_get_toc_entry(drive, ti->cdti_trk1, &last_toc);
if (stat)
return stat;
if (ti->cdti_trk1 != CDROM_LEADOUT)
++last_toc;
lba_start = first_toc->addr.lba;
lba_end = last_toc->addr.lba;
if (lba_end <= lba_start)
return -EINVAL;
ide_cd_init_rq(drive, &rq);
rq.sense = &sense;
rq.cmd[0] = GPCMD_PLAY_AUDIO_MSF;
lba_to_msf(lba_start, &rq.cmd[3], &rq.cmd[4], &rq.cmd[5]);
lba_to_msf(lba_end - 1, &rq.cmd[6], &rq.cmd[7], &rq.cmd[8]);
return ide_cd_queue_pc(drive, &rq);
}
static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg)
{
struct cdrom_info *cd = drive->driver_data;
struct cdrom_tochdr *tochdr = arg;
struct atapi_toc *toc;
int stat;
/* Make sure our saved TOC is valid. */
stat = ide_cd_read_toc(drive, NULL);
if (stat)
return stat;
toc = cd->toc;
tochdr->cdth_trk0 = toc->hdr.first_track;
tochdr->cdth_trk1 = toc->hdr.last_track;
return 0;
}
static int ide_cd_read_tocentry(ide_drive_t *drive, void *arg)
{
struct cdrom_tocentry *tocentry = arg;
struct atapi_toc_entry *toce;
int stat;
stat = ide_cd_get_toc_entry(drive, tocentry->cdte_track, &toce);
if (stat)
return stat;
tocentry->cdte_ctrl = toce->control;
tocentry->cdte_adr = toce->adr;
if (tocentry->cdte_format == CDROM_MSF) {
lba_to_msf(toce->addr.lba,
&tocentry->cdte_addr.msf.minute,
&tocentry->cdte_addr.msf.second,
&tocentry->cdte_addr.msf.frame);
} else
tocentry->cdte_addr.lba = toce->addr.lba;
return 0;
}
int ide_cdrom_audio_ioctl(struct cdrom_device_info *cdi,
unsigned int cmd, void *arg)
{
ide_drive_t *drive = cdi->handle;
switch (cmd) {
/*
* emulate PLAY_AUDIO_TI command with PLAY_AUDIO_10, since
* atapi doesn't support it
*/
case CDROMPLAYTRKIND:
return ide_cd_fake_play_trkind(drive, arg);
case CDROMREADTOCHDR:
return ide_cd_read_tochdr(drive, arg);
case CDROMREADTOCENTRY:
return ide_cd_read_tocentry(drive, arg);
default:
return -EINVAL;
}
}
/* the generic packet interface to cdrom.c */
int ide_cdrom_packet(struct cdrom_device_info *cdi,
struct packet_command *cgc)
{
struct request req;
ide_drive_t *drive = cdi->handle;
if (cgc->timeout <= 0)
cgc->timeout = ATAPI_WAIT_PC;
/* here we queue the commands from the uniform CD-ROM
layer. the packet must be complete, as we do not
touch it at all. */
ide_cd_init_rq(drive, &req);
memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
if (cgc->sense)
memset(cgc->sense, 0, sizeof(struct request_sense));
req.data = cgc->buffer;
req.data_len = cgc->buflen;
req.timeout = cgc->timeout;
if (cgc->quiet)
req.cmd_flags |= REQ_QUIET;
req.sense = cgc->sense;
cgc->stat = ide_cd_queue_pc(drive, &req);
if (!cgc->stat)
cgc->buflen -= req.data_len;
return cgc->stat;
}

359
drivers/ide/ide-cd_verbose.c Normal file
Просмотреть файл

@ -0,0 +1,359 @@
/*
* Verbose error logging for ATAPI CD/DVD devices.
*
* Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
* Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
* Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
*/
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/cdrom.h>
#include <scsi/scsi.h>
#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
void ide_cd_log_error(const char *name, struct request *failed_command,
struct request_sense *sense)
{
/* Suppress printing unit attention and `in progress of becoming ready'
errors when we're not being verbose. */
if (sense->sense_key == UNIT_ATTENTION ||
(sense->sense_key == NOT_READY && (sense->asc == 4 ||
sense->asc == 0x3a)))
return;
printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
"asc: 0x%02x ascq: 0x%02x\n",
name, sense->error_code, sense->sense_key,
sense->asc, sense->ascq);
}
#else
/* The generic packet command opcodes for CD/DVD Logical Units,
* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
static const struct {
unsigned short packet_command;
const char * const text;
} packet_command_texts[] = {
{ GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
{ GPCMD_REQUEST_SENSE, "Request Sense" },
{ GPCMD_FORMAT_UNIT, "Format Unit" },
{ GPCMD_INQUIRY, "Inquiry" },
{ GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
{ GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
{ GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
{ GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
{ GPCMD_READ_10, "Read 10" },
{ GPCMD_WRITE_10, "Write 10" },
{ GPCMD_SEEK, "Seek" },
{ GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
{ GPCMD_VERIFY_10, "Verify 10" },
{ GPCMD_FLUSH_CACHE, "Flush Cache" },
{ GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
{ GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
{ GPCMD_READ_HEADER, "Read Header" },
{ GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
{ GPCMD_GET_CONFIGURATION, "Get Configuration" },
{ GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
{ GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
{ GPCMD_GET_EVENT_STATUS_NOTIFICATION,
"Get Event Status Notification" },
{ GPCMD_PAUSE_RESUME, "Pause/Resume" },
{ GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
{ GPCMD_READ_DISC_INFO, "Read Disc Info" },
{ GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
{ GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
{ GPCMD_SEND_OPC, "Send OPC" },
{ GPCMD_MODE_SELECT_10, "Mode Select 10" },
{ GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
{ GPCMD_MODE_SENSE_10, "Mode Sense 10" },
{ GPCMD_CLOSE_TRACK, "Close Track" },
{ GPCMD_BLANK, "Blank" },
{ GPCMD_SEND_EVENT, "Send Event" },
{ GPCMD_SEND_KEY, "Send Key" },
{ GPCMD_REPORT_KEY, "Report Key" },
{ GPCMD_LOAD_UNLOAD, "Load/Unload" },
{ GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
{ GPCMD_READ_12, "Read 12" },
{ GPCMD_GET_PERFORMANCE, "Get Performance" },
{ GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
{ GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
{ GPCMD_SET_STREAMING, "Set Streaming" },
{ GPCMD_READ_CD_MSF, "Read CD MSF" },
{ GPCMD_SCAN, "Scan" },
{ GPCMD_SET_SPEED, "Set Speed" },
{ GPCMD_PLAY_CD, "Play CD" },
{ GPCMD_MECHANISM_STATUS, "Mechanism Status" },
{ GPCMD_READ_CD, "Read CD" },
};
/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
static const char * const sense_key_texts[16] = {
"No sense data",
"Recovered error",
"Not ready",
"Medium error",
"Hardware error",
"Illegal request",
"Unit attention",
"Data protect",
"Blank check",
"(reserved)",
"(reserved)",
"Aborted command",
"(reserved)",
"(reserved)",
"Miscompare",
"(reserved)",
};
/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
static const struct {
unsigned long asc_ascq;
const char * const text;
} sense_data_texts[] = {
{ 0x000000, "No additional sense information" },
{ 0x000011, "Play operation in progress" },
{ 0x000012, "Play operation paused" },
{ 0x000013, "Play operation successfully completed" },
{ 0x000014, "Play operation stopped due to error" },
{ 0x000015, "No current audio status to return" },
{ 0x010c0a, "Write error - padding blocks added" },
{ 0x011700, "Recovered data with no error correction applied" },
{ 0x011701, "Recovered data with retries" },
{ 0x011702, "Recovered data with positive head offset" },
{ 0x011703, "Recovered data with negative head offset" },
{ 0x011704, "Recovered data with retries and/or CIRC applied" },
{ 0x011705, "Recovered data using previous sector ID" },
{ 0x011800, "Recovered data with error correction applied" },
{ 0x011801, "Recovered data with error correction and retries applied"},
{ 0x011802, "Recovered data - the data was auto-reallocated" },
{ 0x011803, "Recovered data with CIRC" },
{ 0x011804, "Recovered data with L-EC" },
{ 0x015d00, "Failure prediction threshold exceeded"
" - Predicted logical unit failure" },
{ 0x015d01, "Failure prediction threshold exceeded"
" - Predicted media failure" },
{ 0x015dff, "Failure prediction threshold exceeded - False" },
{ 0x017301, "Power calibration area almost full" },
{ 0x020400, "Logical unit not ready - cause not reportable" },
/* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
{ 0x020401, "Logical unit not ready"
" - in progress [sic] of becoming ready" },
{ 0x020402, "Logical unit not ready - initializing command required" },
{ 0x020403, "Logical unit not ready - manual intervention required" },
{ 0x020404, "Logical unit not ready - format in progress" },
{ 0x020407, "Logical unit not ready - operation in progress" },
{ 0x020408, "Logical unit not ready - long write in progress" },
{ 0x020600, "No reference position found (media may be upside down)" },
{ 0x023000, "Incompatible medium installed" },
{ 0x023a00, "Medium not present" },
{ 0x025300, "Media load or eject failed" },
{ 0x025700, "Unable to recover table of contents" },
{ 0x030300, "Peripheral device write fault" },
{ 0x030301, "No write current" },
{ 0x030302, "Excessive write errors" },
{ 0x030c00, "Write error" },
{ 0x030c01, "Write error - Recovered with auto reallocation" },
{ 0x030c02, "Write error - auto reallocation failed" },
{ 0x030c03, "Write error - recommend reassignment" },
{ 0x030c04, "Compression check miscompare error" },
{ 0x030c05, "Data expansion occurred during compress" },
{ 0x030c06, "Block not compressible" },
{ 0x030c07, "Write error - recovery needed" },
{ 0x030c08, "Write error - recovery failed" },
{ 0x030c09, "Write error - loss of streaming" },
{ 0x031100, "Unrecovered read error" },
{ 0x031106, "CIRC unrecovered error" },
{ 0x033101, "Format command failed" },
{ 0x033200, "No defect spare location available" },
{ 0x033201, "Defect list update failure" },
{ 0x035100, "Erase failure" },
{ 0x037200, "Session fixation error" },
{ 0x037201, "Session fixation error writin lead-in" },
{ 0x037202, "Session fixation error writin lead-out" },
{ 0x037300, "CD control error" },
{ 0x037302, "Power calibration area is full" },
{ 0x037303, "Power calibration area error" },
{ 0x037304, "Program memory area / RMA update failure" },
{ 0x037305, "Program memory area / RMA is full" },
{ 0x037306, "Program memory area / RMA is (almost) full" },
{ 0x040200, "No seek complete" },
{ 0x040300, "Write fault" },
{ 0x040900, "Track following error" },
{ 0x040901, "Tracking servo failure" },
{ 0x040902, "Focus servo failure" },
{ 0x040903, "Spindle servo failure" },
{ 0x041500, "Random positioning error" },
{ 0x041501, "Mechanical positioning or changer error" },
{ 0x041502, "Positioning error detected by read of medium" },
{ 0x043c00, "Mechanical positioning or changer error" },
{ 0x044000, "Diagnostic failure on component (ASCQ)" },
{ 0x044400, "Internal CD/DVD logical unit failure" },
{ 0x04b600, "Media load mechanism failed" },
{ 0x051a00, "Parameter list length error" },
{ 0x052000, "Invalid command operation code" },
{ 0x052100, "Logical block address out of range" },
{ 0x052102, "Invalid address for write" },
{ 0x052400, "Invalid field in command packet" },
{ 0x052600, "Invalid field in parameter list" },
{ 0x052601, "Parameter not supported" },
{ 0x052602, "Parameter value invalid" },
{ 0x052700, "Write protected media" },
{ 0x052c00, "Command sequence error" },
{ 0x052c03, "Current program area is not empty" },
{ 0x052c04, "Current program area is empty" },
{ 0x053001, "Cannot read medium - unknown format" },
{ 0x053002, "Cannot read medium - incompatible format" },
{ 0x053900, "Saving parameters not supported" },
{ 0x054e00, "Overlapped commands attempted" },
{ 0x055302, "Medium removal prevented" },
{ 0x055500, "System resource failure" },
{ 0x056300, "End of user area encountered on this track" },
{ 0x056400, "Illegal mode for this track or incompatible medium" },
{ 0x056f00, "Copy protection key exchange failure"
" - Authentication failure" },
{ 0x056f01, "Copy protection key exchange failure - Key not present" },
{ 0x056f02, "Copy protection key exchange failure"
" - Key not established" },
{ 0x056f03, "Read of scrambled sector without authentication" },
{ 0x056f04, "Media region code is mismatched to logical unit" },
{ 0x056f05, "Drive region must be permanent"
" / region reset count error" },
{ 0x057203, "Session fixation error - incomplete track in session" },
{ 0x057204, "Empty or partially written reserved track" },
{ 0x057205, "No more RZONE reservations are allowed" },
{ 0x05bf00, "Loss of streaming" },
{ 0x062800, "Not ready to ready transition, medium may have changed" },
{ 0x062900, "Power on, reset or hardware reset occurred" },
{ 0x062a00, "Parameters changed" },
{ 0x062a01, "Mode parameters changed" },
{ 0x062e00, "Insufficient time for operation" },
{ 0x063f00, "Logical unit operating conditions have changed" },
{ 0x063f01, "Microcode has been changed" },
{ 0x065a00, "Operator request or state change input (unspecified)" },
{ 0x065a01, "Operator medium removal request" },
{ 0x0bb900, "Play operation aborted" },
/* Here we use 0xff for the key (not a valid key) to signify
* that these can have _any_ key value associated with them... */
{ 0xff0401, "Logical unit is in process of becoming ready" },
{ 0xff0400, "Logical unit not ready, cause not reportable" },
{ 0xff0402, "Logical unit not ready, initializing command required" },
{ 0xff0403, "Logical unit not ready, manual intervention required" },
{ 0xff0500, "Logical unit does not respond to selection" },
{ 0xff0800, "Logical unit communication failure" },
{ 0xff0802, "Logical unit communication parity error" },
{ 0xff0801, "Logical unit communication time-out" },
{ 0xff2500, "Logical unit not supported" },
{ 0xff4c00, "Logical unit failed self-configuration" },
{ 0xff3e00, "Logical unit has not self-configured yet" },
};
void ide_cd_log_error(const char *name, struct request *failed_command,
struct request_sense *sense)
{
int i;
const char *s = "bad sense key!";
char buf[80];
printk(KERN_ERR "ATAPI device %s:\n", name);
if (sense->error_code == 0x70)
printk(KERN_CONT " Error: ");
else if (sense->error_code == 0x71)
printk(" Deferred Error: ");
else if (sense->error_code == 0x7f)
printk(KERN_CONT " Vendor-specific Error: ");
else
printk(KERN_CONT " Unknown Error Type: ");
if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
s = sense_key_texts[sense->sense_key];
printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
if (sense->asc == 0x40) {
sprintf(buf, "Diagnostic failure on component 0x%02x",
sense->ascq);
s = buf;
} else {
int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
unsigned long key = (sense->sense_key << 16);
key |= (sense->asc << 8);
if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
key |= sense->ascq;
s = NULL;
while (hi > lo) {
mid = (lo + hi) / 2;
if (sense_data_texts[mid].asc_ascq == key ||
sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
s = sense_data_texts[mid].text;
break;
} else if (sense_data_texts[mid].asc_ascq > key)
hi = mid;
else
lo = mid + 1;
}
}
if (s == NULL) {
if (sense->asc > 0x80)
s = "(vendor-specific error)";
else
s = "(reserved error code)";
}
printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
s, sense->asc, sense->ascq);
if (failed_command != NULL) {
int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
s = NULL;
while (hi > lo) {
mid = (lo + hi) / 2;
if (packet_command_texts[mid].packet_command ==
failed_command->cmd[0]) {
s = packet_command_texts[mid].text;
break;
}
if (packet_command_texts[mid].packet_command >
failed_command->cmd[0])
hi = mid;
else
lo = mid + 1;
}
printk(KERN_ERR " The failed \"%s\" packet command "
"was: \n \"", s);
for (i = 0; i < sizeof(failed_command->cmd); i++)
printk(KERN_CONT "%02x ", failed_command->cmd[i]);
printk(KERN_CONT "\"\n");
}
/* The SKSV bit specifies validity of the sense_key_specific
* in the next two commands. It is bit 7 of the first byte.
* In the case of NOT_READY, if SKSV is set the drive can
* give us nice ETA readings.
*/
if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
printk(KERN_ERR " Command is %02d%% complete\n",
progress / 0xffff);
}
if (sense->sense_key == ILLEGAL_REQUEST &&
(sense->sks[0] & 0x80) != 0) {
printk(KERN_ERR " Error in %s byte %d",
(sense->sks[0] & 0x40) != 0 ?
"command packet" : "command data",
(sense->sks[1] << 8) + sense->sks[2]);
if ((sense->sks[0] & 0x40) != 0)
printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
printk(KERN_CONT "\n");
}
}
#endif

11
drivers/ide/ide-disk.c
Просмотреть файл

@ -1,10 +1,9 @@
/*
* linux/drivers/ide/ide-disk.c Version 1.18 Mar 05, 2003
*
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1998-2002 Linux ATA Development
* Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1998-2002 Linux ATA Development
* Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*

110
drivers/ide/ide-dma.c
Просмотреть файл

@ -1,15 +1,13 @@
/*
* linux/drivers/ide/ide-dma.c Version 4.10 June 9, 2000
* Copyright (C) 1995-1998 Mark Lord
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz
*
* Copyright (c) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* May be copied or modified under the terms of the GNU General Public License
*/
/*
* Special Thanks to Mark for his Six years of work.
*
* Copyright (c) 1995-1998 Mark Lord
* May be copied or modified under the terms of the GNU General Public License
*/
/*
@ -85,6 +83,7 @@
#include <linux/ide.h>
#include <linux/delay.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -169,16 +168,15 @@ static int ide_dma_good_drive(ide_drive_t *drive)
return ide_in_drive_list(drive->id, drive_whitelist);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_build_sglist - map IDE scatter gather for DMA I/O
* @drive: the drive to build the DMA table for
* @rq: the request holding the sg list
*
* Perform the PCI mapping magic necessary to access the source or
* target buffers of a request via PCI DMA. The lower layers of the
* Perform the DMA mapping magic necessary to access the source or
* target buffers of a request via DMA. The lower layers of the
* kernel provide the necessary cache management so that we can
* operate in a portable fashion
* operate in a portable fashion.
*/
int ide_build_sglist(ide_drive_t *drive, struct request *rq)
@ -186,20 +184,20 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
ide_hwif_t *hwif = HWIF(drive);
struct scatterlist *sg = hwif->sg_table;
BUG_ON((rq->cmd_type == REQ_TYPE_ATA_TASKFILE) && rq->nr_sectors > 256);
ide_map_sg(drive, rq);
if (rq_data_dir(rq) == READ)
hwif->sg_dma_direction = PCI_DMA_FROMDEVICE;
hwif->sg_dma_direction = DMA_FROM_DEVICE;
else
hwif->sg_dma_direction = PCI_DMA_TODEVICE;
hwif->sg_dma_direction = DMA_TO_DEVICE;
return pci_map_sg(hwif->pci_dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
hwif->sg_dma_direction);
}
EXPORT_SYMBOL_GPL(ide_build_sglist);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_build_dmatable - build IDE DMA table
*
@ -284,16 +282,17 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
*--table |= cpu_to_le32(0x80000000);
return count;
}
printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
use_pio_instead:
pci_unmap_sg(hwif->pci_dev,
hwif->sg_table,
hwif->sg_nents,
hwif->sg_dma_direction);
ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
EXPORT_SYMBOL_GPL(ide_build_dmatable);
#endif
/**
* ide_destroy_dmatable - clean up DMA mapping
@ -308,15 +307,15 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
void ide_destroy_dmatable (ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct scatterlist *sg = HWIF(drive)->sg_table;
int nents = HWIF(drive)->sg_nents;
ide_hwif_t *hwif = drive->hwif;
pci_unmap_sg(dev, sg, nents, HWIF(drive)->sg_dma_direction);
dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
}
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* config_drive_for_dma - attempt to activate IDE DMA
* @drive: the drive to place in DMA mode
@ -474,8 +473,6 @@ void ide_dma_on(ide_drive_t *drive)
drive->hwif->dma_host_set(drive, 1);
}
EXPORT_SYMBOL(ide_dma_on);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_dma_setup - begin a DMA phase
@ -847,10 +844,10 @@ EXPORT_SYMBOL(ide_dma_timeout);
static void ide_release_dma_engine(ide_hwif_t *hwif)
{
if (hwif->dmatable_cpu) {
pci_free_consistent(hwif->pci_dev,
PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu,
hwif->dmatable_dma);
struct pci_dev *pdev = to_pci_dev(hwif->dev);
pci_free_consistent(pdev, PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
}
@ -878,7 +875,9 @@ int ide_release_dma(ide_hwif_t *hwif)
static int ide_allocate_dma_engine(ide_hwif_t *hwif)
{
hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
struct pci_dev *pdev = to_pci_dev(hwif->dev);
hwif->dmatable_cpu = pci_alloc_consistent(pdev,
PRD_ENTRIES * PRD_BYTES,
&hwif->dmatable_dma);
@ -891,19 +890,19 @@ static int ide_allocate_dma_engine(ide_hwif_t *hwif)
return 1;
}
static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base)
{
printk(KERN_INFO " %s: MMIO-DMA ", hwif->name);
return 0;
}
static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base)
{
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
hwif->name, base, base + ports - 1);
hwif->name, base, base + 7);
if (!request_region(base, ports, hwif->name)) {
if (!request_region(base, 8, hwif->name)) {
printk(" -- Error, ports in use.\n");
return 1;
}
@ -915,7 +914,7 @@ static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int port
if (!request_region(hwif->extra_base,
hwif->cds->extra, hwif->cds->name)) {
printk(" -- Error, extra ports in use.\n");
release_region(base, ports);
release_region(base, 8);
return 1;
}
hwif->extra_ports = hwif->cds->extra;
@ -925,17 +924,19 @@ static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int port
return 0;
}
static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base)
{
if (hwif->mmio)
return ide_mapped_mmio_dma(hwif, base,ports);
return ide_mapped_mmio_dma(hwif, base);
return ide_iomio_dma(hwif, base, ports);
return ide_iomio_dma(hwif, base);
}
void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
{
if (ide_dma_iobase(hwif, base, num_ports))
u8 dma_stat;
if (ide_dma_iobase(hwif, base))
return;
if (ide_allocate_dma_engine(hwif)) {
@ -945,16 +946,16 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
hwif->dma_base = base;
if (!(hwif->dma_command))
hwif->dma_command = hwif->dma_base;
if (!(hwif->dma_vendor1))
hwif->dma_vendor1 = (hwif->dma_base + 1);
if (!(hwif->dma_status))
hwif->dma_status = (hwif->dma_base + 2);
if (!(hwif->dma_vendor3))
hwif->dma_vendor3 = (hwif->dma_base + 3);
if (!(hwif->dma_prdtable))
hwif->dma_prdtable = (hwif->dma_base + 4);
if (!hwif->dma_command)
hwif->dma_command = hwif->dma_base + 0;
if (!hwif->dma_vendor1)
hwif->dma_vendor1 = hwif->dma_base + 1;
if (!hwif->dma_status)
hwif->dma_status = hwif->dma_base + 2;
if (!hwif->dma_vendor3)
hwif->dma_vendor3 = hwif->dma_base + 3;
if (!hwif->dma_prdtable)
hwif->dma_prdtable = hwif->dma_base + 4;
if (!hwif->dma_host_set)
hwif->dma_host_set = &ide_dma_host_set;
@ -973,13 +974,10 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
if (!hwif->dma_lost_irq)
hwif->dma_lost_irq = &ide_dma_lost_irq;
if (hwif->chipset != ide_trm290) {
u8 dma_stat = hwif->INB(hwif->dma_status);
printk(", BIOS settings: %s:%s, %s:%s",
hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "pio",
hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio");
}
printk("\n");
dma_stat = hwif->INB(hwif->dma_status);
printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n",
hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO",
hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO");
}
EXPORT_SYMBOL_GPL(ide_setup_dma);

126
drivers/ide/ide-floppy.c
Просмотреть файл

@ -1,13 +1,12 @@
/*
* linux/drivers/ide/ide-floppy.c Version 0.99 Feb 24 2002
*
* Copyright (C) 1996 - 1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2000 - 2002 Paul Bristow <paul@paulbristow.net>
*/
/*
* IDE ATAPI floppy driver.
*
* Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
* Copyright (C) 2005 Bartlomiej Zolnierkiewicz
*/
/*
* The driver currently doesn't have any fancy features, just the bare
* minimum read/write support.
*
@ -17,67 +16,8 @@
* Iomega Zip 100/250
* Iomega PC Card Clik!/PocketZip
*
* Many thanks to Lode Leroy <Lode.Leroy@www.ibase.be>, who tested so many
* ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive.
*
* Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c.
* Ver 0.2 Oct 31 96 Minor changes.
* Ver 0.3 Dec 2 96 Fixed error recovery bug.
* Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl.
* Ver 0.5 Feb 21 97 Add partitions support.
* Use the minimum of the LBA and CHS capacities.
* Avoid hwgroup->rq == NULL on the last irq.
* Fix potential null dereferencing with DEBUG_LOG.
* Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds.
* Add media write-protect detection.
* Issue START command only if TEST UNIT READY fails.
* Add work-around for IOMEGA ZIP revision 21.D.
* Remove idefloppy_get_capabilities().
* Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of
* bytes requested on each interrupt to be zero.
* Thanks to <shanos@es.co.nz> for pointing this out.
* Ver 0.9.sv Jan 6 01 Sam Varshavchik <mrsam@courier-mta.com>
* Implement low level formatting. Reimplemented
* IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp
* bit. My LS-120 drive barfs on
* IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me.
* Compromise by not reporting a failure to get this
* mode page. Implemented four IOCTLs in order to
* implement formatting. IOCTls begin with 0x4600,
* 0x46 is 'F' as in Format.
* Jan 9 01 Userland option to select format verify.
* Added PC_SUPPRESS_ERROR flag - some idefloppy drives
* do not implement IDEFLOPPY_CAPABILITIES_PAGE, and
* return a sense error. Suppress error reporting in
* this particular case in order to avoid spurious
* errors in syslog. The culprit is
* idefloppy_get_capability_page(), so move it to
* idefloppy_begin_format() so that it's not used
* unless absolutely necessary.
* If drive does not support format progress indication
* monitor the dsc bit in the status register.
* Also, O_NDELAY on open will allow the device to be
* opened without a disk available. This can be used to
* open an unformatted disk, or get the device capacity.
* Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by
* <paul@paulbristow.net>
* Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this
* driver. Included Powerbook internal zip kludge.
* Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive
* no disk on insert and disk change now works
* Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere
* Ver 0.95 Nov 7 00 Brought across to kernel 2.4
* Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0
* including set_bit patch from Rusty Russell
* Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series
* Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3
* Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to
* fix a lost interrupt problem. It appears the busy
* bit was being deasserted by my IOMEGA ATAPI ZIP 100
* drive before the drive was actually ready.
* Ver 0.98a Oct 29 01 Expose delay value so we can play.
* Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code
* to support new PocketZip drives
* For a historical changelog see
* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
#define IDEFLOPPY_VERSION "0.99.newide"
@ -1658,7 +1598,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
{
struct idefloppy_id_gcw gcw;
#if IDEFLOPPY_DEBUG_INFO
u16 mask,i;
char buffer[80];
#endif /* IDEFLOPPY_DEBUG_INFO */
@ -1705,55 +1644,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
default: sprintf(buffer, "Reserved");break;
}
printk(KERN_INFO "Command Packet Size: %s\n", buffer);
printk(KERN_INFO "Model: %.40s\n",id->model);
printk(KERN_INFO "Firmware Revision: %.8s\n",id->fw_rev);
printk(KERN_INFO "Serial Number: %.20s\n",id->serial_no);
printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512);
printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO);
printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA);
printk(KERN_INFO "Single Word DMA supported modes:\n");
for (i=0,mask=1;i<8;i++,mask=mask << 1) {
if (id->dma_1word & mask)
printk(KERN_INFO " Mode %d%s\n", i,
(id->dma_1word & (mask << 8)) ? " (active)" : "");
}
printk(KERN_INFO "Multi Word DMA supported modes:\n");
for (i=0,mask=1;i<8;i++,mask=mask << 1) {
if (id->dma_mword & mask)
printk(KERN_INFO " Mode %d%s\n", i,
(id->dma_mword & (mask << 8)) ? " (active)" : "");
}
if (id->field_valid & 0x0002) {
printk(KERN_INFO "Enhanced PIO Modes: %s\n",
id->eide_pio_modes & 1 ? "Mode 3":"None");
if (id->eide_dma_min == 0)
sprintf(buffer, "Not supported");
else
sprintf(buffer, "%d ns",id->eide_dma_min);
printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer);
if (id->eide_dma_time == 0)
sprintf(buffer, "Not supported");
else
sprintf(buffer, "%d ns",id->eide_dma_time);
printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer);
if (id->eide_pio == 0)
sprintf(buffer, "Not supported");
else
sprintf(buffer, "%d ns",id->eide_pio);
printk(KERN_INFO "Minimum PIO cycle without IORDY: %s\n",
buffer);
if (id->eide_pio_iordy == 0)
sprintf(buffer, "Not supported");
else
sprintf(buffer, "%d ns",id->eide_pio_iordy);
printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer);
} else
printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n");
#endif /* IDEFLOPPY_DEBUG_INFO */
if (gcw.protocol != 2)

2
drivers/ide/ide-io.c
Просмотреть файл

@ -1487,7 +1487,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
* remove all the ifdef PCI crap
*/
#ifdef CONFIG_BLK_DEV_IDEPCI
if (hwif->pci_dev && !hwif->pci_dev->vendor)
if (hwif->chipset != ide_pci)
#endif /* CONFIG_BLK_DEV_IDEPCI */
{
/*

4
drivers/ide/ide-iops.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/ide-iops.c Version 0.37 Mar 05, 2003
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
*
@ -1168,7 +1166,7 @@ EXPORT_SYMBOL(ide_do_reset);
/*
* ide_wait_not_busy() waits for the currently selected device on the hwif
* to report a non-busy status, see comments in probe_hwif().
* to report a non-busy status, see comments in ide_probe_port().
*/
int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
{

6
drivers/ide/ide-lib.c
Просмотреть файл

@ -358,8 +358,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
if (!PCI_DMA_BUS_IS_PHYS) {
addr = BLK_BOUNCE_ANY;
} else if (on && drive->media == ide_disk) {
if (HWIF(drive)->pci_dev)
addr = HWIF(drive)->pci_dev->dma_mask;
struct device *dev = drive->hwif->dev;
if (dev && dev->dma_mask)
addr = *dev->dma_mask;
}
if (drive->queue)

2
drivers/ide/ide-pnp.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/ide-pnp.c
*
* This file provides autodetection for ISA PnP IDE interfaces.
* It was tested with "ESS ES1868 Plug and Play AudioDrive" IDE interface.
*

190
drivers/ide/ide-probe.c
Просмотреть файл

@ -1,7 +1,6 @@
/*
* linux/drivers/ide/ide-probe.c Version 1.11 Mar 05, 2003
*
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
@ -129,6 +128,10 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
drive->id_read = 1;
local_irq_enable();
#ifdef DEBUG
printk(KERN_INFO "%s: dumping identify data\n", drive->name);
ide_dump_identify((u8 *)id);
#endif
ide_fix_driveid(id);
#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
@ -610,7 +613,7 @@ static void hwif_release_dev (struct device *dev)
complete(&hwif->gendev_rel_comp);
}
static void hwif_register (ide_hwif_t *hwif)
static void ide_register_port(ide_hwif_t *hwif)
{
int ret;
@ -618,8 +621,8 @@ static void hwif_register (ide_hwif_t *hwif)
strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE);
hwif->gendev.driver_data = hwif;
if (hwif->gendev.parent == NULL) {
if (hwif->pci_dev)
hwif->gendev.parent = &hwif->pci_dev->dev;
if (hwif->dev)
hwif->gendev.parent = hwif->dev;
else
/* Would like to do = &device_legacy */
hwif->gendev.parent = NULL;
@ -631,7 +634,33 @@ static void hwif_register (ide_hwif_t *hwif)
__FUNCTION__, ret);
}
static int wait_hwif_ready(ide_hwif_t *hwif)
/**
* ide_port_wait_ready - wait for port to become ready
* @hwif: IDE port
*
* This is needed on some PPCs and a bunch of BIOS-less embedded
* platforms. Typical cases are:
*
* - The firmware hard reset the disk before booting the kernel,
* the drive is still doing it's poweron-reset sequence, that
* can take up to 30 seconds.
*
* - The firmware does nothing (or no firmware), the device is
* still in POST state (same as above actually).
*
* - Some CD/DVD/Writer combo drives tend to drive the bus during
* their reset sequence even when they are non-selected slave
* devices, thus preventing discovery of the main HD.
*
* Doing this wait-for-non-busy should not harm any existing
* configuration and fix some issues like the above.
*
* BenH.
*
* Returns 0 on success, error code (< 0) otherwise.
*/
static int ide_port_wait_ready(ide_hwif_t *hwif)
{
int unit, rc;
@ -709,36 +738,16 @@ void ide_undecoded_slave(ide_drive_t *drive1)
EXPORT_SYMBOL_GPL(ide_undecoded_slave);
/*
* This routine only knows how to look for drive units 0 and 1
* on an interface, so any setting of MAX_DRIVES > 2 won't work here.
*/
static void probe_hwif(ide_hwif_t *hwif)
static int ide_probe_port(ide_hwif_t *hwif)
{
unsigned long flags;
unsigned int irqd;
int unit;
int unit, rc = -ENODEV;
BUG_ON(hwif->present);
if (hwif->noprobe)
return;
if ((hwif->chipset != ide_4drives || !hwif->mate || !hwif->mate->present) &&
(ide_hwif_request_regions(hwif))) {
u16 msgout = 0;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
if (drive->present) {
drive->present = 0;
printk(KERN_ERR "%s: ERROR, PORTS ALREADY IN USE\n",
drive->name);
msgout = 1;
}
}
if (!msgout)
printk(KERN_ERR "%s: ports already in use, skipping probe\n",
hwif->name);
return;
}
return -EACCES;
/*
* We must always disable IRQ, as probe_for_drive will assert IRQ, but
@ -750,26 +759,7 @@ static void probe_hwif(ide_hwif_t *hwif)
local_irq_set(flags);
/* This is needed on some PPCs and a bunch of BIOS-less embedded
* platforms. Typical cases are:
*
* - The firmware hard reset the disk before booting the kernel,
* the drive is still doing it's poweron-reset sequence, that
* can take up to 30 seconds
* - The firmware does nothing (or no firmware), the device is
* still in POST state (same as above actually).
* - Some CD/DVD/Writer combo drives tend to drive the bus during
* their reset sequence even when they are non-selected slave
* devices, thus preventing discovery of the main HD
*
* Doing this wait-for-busy should not harm any existing configuration
* (at least things won't be worse than what current code does, that
* is blindly go & talk to the drive) and fix some issues like the
* above.
*
* BenH.
*/
if (wait_hwif_ready(hwif) == -EBUSY)
if (ide_port_wait_ready(hwif) == -EBUSY)
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
@ -779,14 +769,8 @@ static void probe_hwif(ide_hwif_t *hwif)
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);
if (drive->present && !hwif->present) {
hwif->present = 1;
if (hwif->chipset != ide_4drives ||
!hwif->mate ||
!hwif->mate->present) {
hwif_register(hwif);
}
}
if (drive->present)
rc = 0;
}
if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) {
printk(KERN_WARNING "%s: reset\n", hwif->name);
@ -803,10 +787,12 @@ static void probe_hwif(ide_hwif_t *hwif)
if (irqd)
enable_irq(irqd);
if (!hwif->present) {
ide_hwif_release_regions(hwif);
return;
}
return rc;
}
static void ide_port_tune_devices(ide_hwif_t *hwif)
{
int unit;
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];
@ -997,21 +983,17 @@ static int init_irq (ide_hwif_t *hwif)
spin_lock_irq(&ide_lock);
hwif->next = hwgroup->hwif->next;
hwgroup->hwif->next = hwif;
BUG_ON(hwif->next == hwif);
spin_unlock_irq(&ide_lock);
} else {
hwgroup = kmalloc_node(sizeof(ide_hwgroup_t),
GFP_KERNEL | __GFP_ZERO,
hwif_to_node(hwif->drives[0].hwif));
if (!hwgroup)
goto out_up;
hwgroup = kmalloc_node(sizeof(*hwgroup), GFP_KERNEL|__GFP_ZERO,
hwif_to_node(hwif));
if (hwgroup == NULL)
goto out_up;
hwif->hwgroup = hwgroup;
hwgroup->hwif = hwif->next = hwif;
hwgroup->hwif = hwif->next = hwif;
hwgroup->rq = NULL;
hwgroup->handler = NULL;
hwgroup->drive = NULL;
hwgroup->busy = 0;
init_timer(&hwgroup->timer);
hwgroup->timer.function = &ide_timer_expiry;
hwgroup->timer.data = (unsigned long) hwgroup;
@ -1079,25 +1061,7 @@ static int init_irq (ide_hwif_t *hwif)
mutex_unlock(&ide_cfg_mtx);
return 0;
out_unlink:
spin_lock_irq(&ide_lock);
if (hwif->next == hwif) {
BUG_ON(match);
BUG_ON(hwgroup->hwif != hwif);
kfree(hwgroup);
} else {
ide_hwif_t *g;
g = hwgroup->hwif;
while (g->next != hwif)
g = g->next;
g->next = hwif->next;
if (hwgroup->hwif == hwif) {
/* Impossible. */
printk(KERN_ERR "Duh. Uninitialized hwif listed as active hwif.\n");
hwgroup->hwif = g;
}
BUG_ON(hwgroup->hwif == hwif);
}
spin_unlock_irq(&ide_lock);
ide_remove_port_from_hwgroup(hwif);
out_up:
mutex_unlock(&ide_cfg_mtx);
return 1;
@ -1246,28 +1210,21 @@ static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
/* Return success if no device is connected */
if (!hwif->present)
return 1;
if (!hwif->irq) {
if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET])))
{
printk("%s: DISABLED, NO IRQ\n", hwif->name);
return (hwif->present = 0);
return 0;
}
}
#ifdef CONFIG_BLK_DEV_HD
if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) {
printk("%s: CANNOT SHARE IRQ WITH OLD "
"HARDDISK DRIVER (hd.c)\n", hwif->name);
return (hwif->present = 0);
return 0;
}
#endif /* CONFIG_BLK_DEV_HD */
/* we set it back to 1 if all is ok below */
hwif->present = 0;
if (register_blkdev(hwif->major, hwif->name))
return 0;
@ -1306,10 +1263,7 @@ static int hwif_init(ide_hwif_t *hwif)
done:
init_gendisk(hwif);
ide_acpi_init(hwif);
hwif->present = 1; /* success */
return 1;
out:
@ -1344,7 +1298,27 @@ int ide_device_add_all(u8 *idx)
if (idx[i] == 0xff)
continue;
probe_hwif(&ide_hwifs[idx[i]]);
hwif = &ide_hwifs[idx[i]];
if ((hwif->chipset != ide_4drives || !hwif->mate ||
!hwif->mate->present) && ide_hwif_request_regions(hwif)) {
printk(KERN_ERR "%s: ports already in use, "
"skipping probe\n", hwif->name);
continue;
}
if (ide_probe_port(hwif) < 0) {
ide_hwif_release_regions(hwif);
continue;
}
hwif->present = 1;
if (hwif->chipset != ide_4drives || !hwif->mate ||
!hwif->mate->present)
ide_register_port(hwif);
ide_port_tune_devices(hwif);
}
for (i = 0; i < MAX_HWIFS; i++) {
@ -1353,9 +1327,13 @@ int ide_device_add_all(u8 *idx)
hwif = &ide_hwifs[idx[i]];
if (!hwif->present)
continue;
if (hwif_init(hwif) == 0) {
printk(KERN_INFO "%s: failed to initialize IDE "
"interface\n", hwif->name);
hwif->present = 0;
rc = -1;
continue;
}

2
drivers/ide/ide-proc.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/ide-proc.c Version 1.05 Mar 05, 2003
*
* Copyright (C) 1997-1998 Mark Lord
* Copyright (C) 2003 Red Hat <alan@redhat.com>
*

9
drivers/ide/ide-scan-pci.c
Просмотреть файл

@ -81,7 +81,7 @@ static int __init ide_scan_pcidev(struct pci_dev *dev)
* module ordering not traditionally ordered.
*/
int __init ide_scan_pcibus(void)
static int __init ide_scan_pcibus(void)
{
struct pci_dev *dev = NULL;
struct pci_driver *d;
@ -113,9 +113,4 @@ int __init ide_scan_pcibus(void)
return 0;
}
static int __init ide_scan_pci(void)
{
return ide_scan_pcibus();
}
module_init(ide_scan_pci);
module_init(ide_scan_pcibus);

80
drivers/ide/ide-tape.c
Просмотреть файл

@ -1,7 +1,6 @@
/*
* linux/drivers/ide/ide-tape.c Version 1.19 Nov, 2003
*
* Copyright (C) 1995 - 1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 1995-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
*
* $Header$
*
@ -4291,9 +4290,6 @@ static int idetape_identify_device (ide_drive_t *drive)
{
struct idetape_id_gcw gcw;
struct hd_driveid *id = drive->id;
#if IDETAPE_DEBUG_INFO
unsigned short mask,i;
#endif /* IDETAPE_DEBUG_INFO */
if (drive->id_read == 0)
return 1;
@ -4333,62 +4329,6 @@ static int idetape_identify_device (ide_drive_t *drive)
case 1: printk("16 bytes\n");break;
default: printk("Reserved\n");break;
}
printk(KERN_INFO "ide-tape: Model: %.40s\n",id->model);
printk(KERN_INFO "ide-tape: Firmware Revision: %.8s\n",id->fw_rev);
printk(KERN_INFO "ide-tape: Serial Number: %.20s\n",id->serial_no);
printk(KERN_INFO "ide-tape: Write buffer size: %d bytes\n",id->buf_size*512);
printk(KERN_INFO "ide-tape: DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
printk(KERN_INFO "ide-tape: LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
printk(KERN_INFO "ide-tape: IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
printk(KERN_INFO "ide-tape: IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
printk(KERN_INFO "ide-tape: ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
printk(KERN_INFO "ide-tape: PIO Cycle Timing Category: %d\n",id->tPIO);
printk(KERN_INFO "ide-tape: DMA Cycle Timing Category: %d\n",id->tDMA);
printk(KERN_INFO "ide-tape: Single Word DMA supported modes: ");
for (i=0,mask=1;i<8;i++,mask=mask << 1) {
if (id->dma_1word & mask)
printk("%d ",i);
if (id->dma_1word & (mask << 8))
printk("(active) ");
}
printk("\n");
printk(KERN_INFO "ide-tape: Multi Word DMA supported modes: ");
for (i=0,mask=1;i<8;i++,mask=mask << 1) {
if (id->dma_mword & mask)
printk("%d ",i);
if (id->dma_mword & (mask << 8))
printk("(active) ");
}
printk("\n");
if (id->field_valid & 0x0002) {
printk(KERN_INFO "ide-tape: Enhanced PIO Modes: %s\n",
id->eide_pio_modes & 1 ? "Mode 3":"None");
printk(KERN_INFO "ide-tape: Minimum Multi-word DMA cycle per word: ");
if (id->eide_dma_min == 0)
printk("Not supported\n");
else
printk("%d ns\n",id->eide_dma_min);
printk(KERN_INFO "ide-tape: Manufacturer\'s Recommended Multi-word cycle: ");
if (id->eide_dma_time == 0)
printk("Not supported\n");
else
printk("%d ns\n",id->eide_dma_time);
printk(KERN_INFO "ide-tape: Minimum PIO cycle without IORDY: ");
if (id->eide_pio == 0)
printk("Not supported\n");
else
printk("%d ns\n",id->eide_pio);
printk(KERN_INFO "ide-tape: Minimum PIO cycle with IORDY: ");
if (id->eide_pio_iordy == 0)
printk("Not supported\n");
else
printk("%d ns\n",id->eide_pio_iordy);
} else
printk(KERN_INFO "ide-tape: According to the device, fields 64-70 are not valid.\n");
#endif /* IDETAPE_DEBUG_INFO */
/* Check that we can support this device */
@ -4591,19 +4531,11 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
spin_lock_init(&tape->spinlock);
drive->dsc_overlap = 1;
#ifdef CONFIG_BLK_DEV_IDEPCI
if (HWIF(drive)->pci_dev != NULL) {
/*
* These two ide-pci host adapters appear to need DSC overlap disabled.
* This probably needs further analysis.
*/
if ((HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) ||
(HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_TTI_HPT343)) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n", tape->name);
drive->dsc_overlap = 0;
}
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
tape->name);
drive->dsc_overlap = 0;
}
#endif /* CONFIG_BLK_DEV_IDEPCI */
/* Seagate Travan drives do not support DSC overlap. */
if (strstr(drive->id->model, "Seagate STT3401"))
drive->dsc_overlap = 0;

12
drivers/ide/ide-taskfile.c
Просмотреть файл

@ -1,11 +1,9 @@
/*
* linux/drivers/ide/ide-taskfile.c Version 0.38 March 05, 2003
*
* Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org>
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2001-2002 Klaus Smolin
* Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org>
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2001-2002 Klaus Smolin
* IBM Storage Technology Division
* Copyright (C) 2003-2004 Bartlomiej Zolnierkiewicz
* Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz
*
* The big the bad and the ugly.
*/
@ -260,7 +258,7 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
return ide_stopped;
}
u8 wait_drive_not_busy(ide_drive_t *drive)
static u8 wait_drive_not_busy(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
int retries;

2
drivers/ide/ide-timing.h
Просмотреть файл

@ -2,8 +2,6 @@
#define _IDE_TIMING_H
/*
* $Id: ide-timing.h,v 1.6 2001/12/23 22:47:56 vojtech Exp $
*
* Copyright (c) 1999-2001 Vojtech Pavlik
*/

116
drivers/ide/ide.c
Просмотреть файл

@ -1,7 +1,6 @@
/*
* linux/drivers/ide/ide.c Version 7.00beta2 Mar 05 2003
*
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyrifht (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
@ -46,7 +45,6 @@
*/
#define REVISION "Revision: 7.00alpha2"
#define VERSION "Id: ide.c 7.00a2 20020906"
#define _IDE_C /* Tell ide.h it's really us */
@ -242,22 +240,12 @@ static int ide_system_bus_speed(void)
#define pci_default 0
#endif /* CONFIG_PCI */
if (!system_bus_speed) {
if (idebus_parameter) {
/* user supplied value */
system_bus_speed = idebus_parameter;
} else if (pci_dev_present(pci_default)) {
/* safe default value for PCI */
system_bus_speed = 33;
} else {
/* safe default value for VESA and PCI */
system_bus_speed = 50;
}
printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
"for PIO modes%s\n", system_bus_speed,
idebus_parameter ? "" : "; override with idebus=xx");
}
return system_bus_speed;
/* user supplied value */
if (idebus_parameter)
return idebus_parameter;
/* safe default value for PCI or VESA and PCI*/
return pci_dev_present(pci_default) ? 33 : 50;
}
ide_hwif_t * ide_find_port(unsigned long base)
@ -405,8 +393,9 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->chipset = tmp_hwif->chipset;
hwif->hold = tmp_hwif->hold;
hwif->dev = tmp_hwif->dev;
#ifdef CONFIG_BLK_DEV_IDEPCI
hwif->pci_dev = tmp_hwif->pci_dev;
hwif->cds = tmp_hwif->cds;
#endif
@ -472,6 +461,41 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->hwif_data = tmp_hwif->hwif_data;
}
void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
{
ide_hwgroup_t *hwgroup = hwif->hwgroup;
spin_lock_irq(&ide_lock);
/*
* Remove us from the hwgroup, and free
* the hwgroup if we were the only member
*/
if (hwif->next == hwif) {
BUG_ON(hwgroup->hwif != hwif);
kfree(hwgroup);
} else {
/* There is another interface in hwgroup.
* Unlink us, and set hwgroup->drive and ->hwif to
* something sane.
*/
ide_hwif_t *g = hwgroup->hwif;
while (g->next != hwif)
g = g->next;
g->next = hwif->next;
if (hwgroup->hwif == hwif) {
/* Chose a random hwif for hwgroup->hwif.
* It's guaranteed that there are no drives
* left in the hwgroup.
*/
BUG_ON(hwgroup->drive != NULL);
hwgroup->hwif = g;
}
BUG_ON(hwgroup->hwif == hwif);
}
spin_unlock_irq(&ide_lock);
}
/**
* ide_unregister - free an IDE interface
* @index: index of interface (will change soon to a pointer)
@ -539,43 +563,8 @@ void ide_unregister(unsigned int index)
if (irq_count == 1)
free_irq(hwif->irq, hwgroup);
spin_lock_irq(&ide_lock);
/*
* Note that we only release the standard ports,
* and do not even try to handle any extra ports
* allocated for weird IDE interface chipsets.
*/
ide_hwif_release_regions(hwif);
ide_remove_port_from_hwgroup(hwif);
/*
* Remove us from the hwgroup, and free
* the hwgroup if we were the only member
*/
if (hwif->next == hwif) {
BUG_ON(hwgroup->hwif != hwif);
kfree(hwgroup);
} else {
/* There is another interface in hwgroup.
* Unlink us, and set hwgroup->drive and ->hwif to
* something sane.
*/
g = hwgroup->hwif;
while (g->next != hwif)
g = g->next;
g->next = hwif->next;
if (hwgroup->hwif == hwif) {
/* Chose a random hwif for hwgroup->hwif.
* It's guaranteed that there are no drives
* left in the hwgroup.
*/
BUG_ON(hwgroup->drive != NULL);
hwgroup->hwif = g;
}
BUG_ON(hwgroup->hwif == hwif);
}
/* More messed up locking ... */
spin_unlock_irq(&ide_lock);
device_unregister(&hwif->gendev);
wait_for_completion(&hwif->gendev_rel_comp);
@ -601,6 +590,13 @@ void ide_unregister(unsigned int index)
hwif->extra_ports = 0;
}
/*
* Note that we only release the standard ports,
* and do not even try to handle any extra ports
* allocated for weird IDE interface chipsets.
*/
ide_hwif_release_regions(hwif);
/* copy original settings */
tmp_hwif = *hwif;
@ -913,7 +909,7 @@ static int set_unmaskirq(ide_drive_t *drive, int arg)
int system_bus_clock (void)
{
return((int) ((!system_bus_speed) ? ide_system_bus_speed() : system_bus_speed ));
return system_bus_speed;
}
EXPORT_SYMBOL(system_bus_clock);
@ -1668,6 +1664,10 @@ static int __init ide_init(void)
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n");
system_bus_speed = ide_system_bus_speed();
printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
"for PIO modes%s\n", system_bus_speed,
idebus_parameter ? "" : "; override with idebus=xx");
ret = bus_register(&ide_bus_type);
if (ret < 0) {
printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);

2
drivers/ide/legacy/ali14xx.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/legacy/ali14xx.c Version 0.03 Feb 09, 1996
*
* Copyright (C) 1996 Linus Torvalds & author (see below)
*/

2
drivers/ide/legacy/buddha.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/legacy/buddha.c -- Amiga Buddha, Catweasel and X-Surf IDE Driver
* Amiga Buddha, Catweasel and X-Surf IDE Driver
*
* Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
*

2
drivers/ide/legacy/dtc2278.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/legacy/dtc2278.c Version 0.02 Feb 10, 1996
*
* Copyright (C) 1996 Linus Torvalds & author (see below)
*/

3
drivers/ide/legacy/falconide.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/legacy/falconide.c -- Atari Falcon IDE Driver
* Atari Falcon IDE Driver
*
* Created 12 Jul 1997 by Geert Uytterhoeven
*
@ -66,6 +66,7 @@ static int __init falconide_init(void)
{
if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
ide_hwif_t *hwif;
printk(KERN_INFO "ide: Falcon IDE controller\n");

2
drivers/ide/legacy/gayle.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/legacy/gayle.c -- Amiga Gayle IDE Driver
* Amiga Gayle IDE Driver
*
* Created 9 Jul 1997 by Geert Uytterhoeven
*

2
drivers/ide/legacy/ht6560b.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/legacy/ht6560b.c Version 0.07 Feb 1, 2000
*
* Copyright (C) 1995-2000 Linus Torvalds & author (see below)
*/

2
drivers/ide/legacy/ide-cs.c
Просмотреть файл

@ -2,8 +2,6 @@
A driver for PCMCIA IDE/ATA disk cards
ide-cs.c 1.3 2002/10/26 05:45:31
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of

34
drivers/ide/legacy/ide_platform.c
Просмотреть файл

@ -21,13 +21,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
static struct {
void __iomem *plat_ide_mapbase;
void __iomem *plat_ide_alt_mapbase;
ide_hwif_t *hwif;
int index;
} hwif_prop;
static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
void __iomem *base,
void __iomem *ctrl,
@ -54,6 +47,7 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw,
static int __devinit plat_ide_probe(struct platform_device *pdev)
{
struct resource *res_base, *res_alt, *res_irq;
void __iomem *base, *alt_base;
ide_hwif_t *hwif;
struct pata_platform_info *pdata;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@ -84,27 +78,25 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
}
if (mmio) {
hwif_prop.plat_ide_mapbase = devm_ioremap(&pdev->dev,
base = devm_ioremap(&pdev->dev,
res_base->start, res_base->end - res_base->start + 1);
hwif_prop.plat_ide_alt_mapbase = devm_ioremap(&pdev->dev,
alt_base = devm_ioremap(&pdev->dev,
res_alt->start, res_alt->end - res_alt->start + 1);
} else {
hwif_prop.plat_ide_mapbase = devm_ioport_map(&pdev->dev,
base = devm_ioport_map(&pdev->dev,
res_base->start, res_base->end - res_base->start + 1);
hwif_prop.plat_ide_alt_mapbase = devm_ioport_map(&pdev->dev,
alt_base = devm_ioport_map(&pdev->dev,
res_alt->start, res_alt->end - res_alt->start + 1);
}
hwif = ide_find_port((unsigned long)hwif_prop.plat_ide_mapbase);
hwif = ide_find_port((unsigned long)base);
if (!hwif) {
ret = -ENODEV;
goto out;
}
memset(&hw, 0, sizeof(hw));
plat_ide_setup_ports(&hw, hwif_prop.plat_ide_mapbase,
hwif_prop.plat_ide_alt_mapbase,
pdata, res_irq->start);
plat_ide_setup_ports(&hw, base, alt_base, pdata, res_irq->start);
hw.dev = &pdev->dev;
ide_init_port_hw(hwif, &hw);
@ -114,9 +106,6 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
default_hwif_mmiops(hwif);
}
hwif_prop.hwif = hwif;
hwif_prop.index = hwif->index;
idx[0] = hwif->index;
ide_device_add(idx);
@ -133,14 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev)
{
ide_hwif_t *hwif = pdev->dev.driver_data;
if (hwif != hwif_prop.hwif) {
dev_printk(KERN_DEBUG, &pdev->dev, "%s: hwif value error",
pdev->name);
} else {
ide_unregister(hwif_prop.index);
hwif_prop.index = 0;
hwif_prop.hwif = NULL;
}
ide_unregister(hwif->index);
return 0;
}

2
drivers/ide/legacy/macide.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/legacy/macide.c -- Macintosh IDE Driver
* Macintosh IDE Driver
*
* Copyright (C) 1998 by Michael Schmitz
*

2
drivers/ide/legacy/q40ide.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/legacy/q40ide.c -- Q40 I/O port IDE Driver
* Q40 I/O port IDE Driver
*
* (c) Richard Zidlicky
*

2
drivers/ide/legacy/qd65xx.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/legacy/qd65xx.c Version 0.07 Sep 30, 2001
*
* Copyright (C) 1996-2001 Linus Torvalds & author (see below)
*/

2
drivers/ide/legacy/qd65xx.h
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/legacy/qd65xx.h
*
* Copyright (c) 2000 Linus Torvalds & authors
*/

2
drivers/ide/legacy/umc8672.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/legacy/umc8672.c Version 0.05 Jul 31, 1996
*
* Copyright (C) 1995-1996 Linus Torvalds & author (see below)
*/

43
drivers/ide/mips/au1xxx-ide.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005
*
* BRIEF MODULE DESCRIPTION
* AMD Alchemy Au1xxx IDE interface routines over the Static Bus
*
@ -50,7 +48,6 @@
#include <asm/mach-au1x00/au1xxx_ide.h>
#define DRV_NAME "au1200-ide"
#define DRV_VERSION "1.0"
#define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
/* enable the burstmode in the dbdma */
@ -209,24 +206,6 @@ static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
static int auide_build_sglist(ide_drive_t *drive, struct request *rq)
{
ide_hwif_t *hwif = drive->hwif;
_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
struct scatterlist *sg = hwif->sg_table;
ide_map_sg(drive, rq);
if (rq_data_dir(rq) == READ)
hwif->sg_dma_direction = DMA_FROM_DEVICE;
else
hwif->sg_dma_direction = DMA_TO_DEVICE;
return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
hwif->sg_dma_direction);
}
static int auide_build_dmatable(ide_drive_t *drive)
{
int i, iswrite, count = 0;
@ -241,8 +220,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
/* Save for interrupt context */
ahwif->drive = drive;
/* Build sglist */
hwif->sg_nents = i = auide_build_sglist(drive, rq);
hwif->sg_nents = i = ide_build_sglist(drive, rq);
if (!i)
return 0;
@ -300,10 +278,7 @@ static int auide_build_dmatable(ide_drive_t *drive)
return 1;
use_pio_instead:
dma_unmap_sg(ahwif->dev,
hwif->sg_table,
hwif->sg_nents,
hwif->sg_dma_direction);
ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
@ -311,11 +286,9 @@ static int auide_build_dmatable(ide_drive_t *drive)
static int auide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
if (hwif->sg_nents) {
dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
ide_destroy_dmatable(drive);
hwif->sg_nents = 0;
}
@ -504,7 +477,7 @@ static int auide_ddma_init(_auide_hwif *auide) {
auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
NUM_DESCRIPTORS);
hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev,
PRD_ENTRIES * PRD_BYTES, /* 1 Page */
&hwif->dmatable_dma, GFP_KERNEL);
@ -592,9 +565,6 @@ static int au_ide_probe(struct device *dev)
#endif
memset(&auide_hwif, 0, sizeof(_auide_hwif));
auide_hwif.dev = 0;
ahwif->dev = dev;
ahwif->irq = platform_get_irq(pdev, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@ -629,10 +599,13 @@ static int au_ide_probe(struct device *dev)
memset(&hw, 0, sizeof(hw));
auide_setup_ports(&hw, ahwif);
hw.irq = ahwif->irq;
hw.dev = dev;
hw.chipset = ide_au1xxx;
ide_init_port_hw(hwif, &hw);
hwif->dev = dev;
hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */
@ -715,7 +688,7 @@ static int au_ide_remove(struct device *dev)
ide_hwif_t *hwif = dev_get_drvdata(dev);
_auide_hwif *ahwif = &auide_hwif;
ide_unregister(hwif - ide_hwifs);
ide_unregister(hwif->index);
iounmap((void *)ahwif->regbase);

11
drivers/ide/pci/aec62xx.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/aec62xx.c Version 0.27 Sep 16, 2007
*
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
*
@ -90,7 +88,7 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 d_conf = 0;
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
@ -116,7 +114,7 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = (drive->select.b.unit & 0x01);
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
@ -170,7 +168,7 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &aec_set_pio_mode;
@ -188,7 +186,7 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
pci_read_config_byte(dev, 0x49, &ata66);
hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
@ -202,6 +200,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_NO_DSC |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,

20
drivers/ide/pci/alim15x3.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/alim15x3.c Version 0.29 Sep 16 2007
*
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
* Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
@ -293,7 +291,7 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int s_time, a_time, c_time;
u8 s_clc, a_clc, r_clc;
unsigned long flags;
@ -396,7 +394,7 @@ static u8 ali_udma_filter(ide_drive_t *drive)
static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;
@ -625,7 +623,7 @@ static int ali_cable_override(struct pci_dev *pdev)
static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long flags;
u8 cbl = ATA_CBL_PATA40, tmpbyte;
@ -688,12 +686,13 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 ideic, inmir;
s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
1, 11, 0, 12, 0, 14, 0, 15 };
int irq = -1;
if (hwif->pci_dev->device == PCI_DEVICE_ID_AL_M5229)
if (dev->device == PCI_DEVICE_ID_AL_M5229)
hwif->irq = hwif->channel ? 15 : 14;
if (isa_dev) {
@ -745,7 +744,7 @@ static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase)
return;
if (!hwif->channel)
outb(inb(dmabase + 2) & 0x60, dmabase + 2);
ide_setup_dma(hwif, dmabase, 8);
ide_setup_dma(hwif, dmabase);
}
static const struct ide_port_info ali15x3_chipset __devinitdata = {
@ -775,7 +774,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
};
struct ide_port_info d = ali15x3_chipset;
u8 rev = dev->revision;
u8 rev = dev->revision, idx = id->driver_data;
if (pci_dev_present(ati_rs100))
printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
@ -798,6 +797,9 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
d.udma_mask = ATA_UDMA6;
}
if (idx == 0)
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
#if defined(CONFIG_SPARC64)
d.init_hwif = init_hwif_common_ali15x3;
#endif /* CONFIG_SPARC64 */
@ -807,7 +809,7 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev
static const struct pci_device_id alim15x3_pci_tbl[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 0 },
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);

281
drivers/ide/pci/amd74xx.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* Version 2.24
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
*
@ -28,81 +26,46 @@
#include "ide-timing.h"
#define AMD_IDE_CONFIG (0x01 + amd_config->base)
#define AMD_CABLE_DETECT (0x02 + amd_config->base)
#define AMD_DRIVE_TIMING (0x08 + amd_config->base)
#define AMD_8BIT_TIMING (0x0e + amd_config->base)
#define AMD_ADDRESS_SETUP (0x0c + amd_config->base)
#define AMD_UDMA_TIMING (0x10 + amd_config->base)
#define AMD_CHECK_SWDMA 0x08
#define AMD_BAD_SWDMA 0x10
#define AMD_BAD_FIFO 0x20
#define AMD_CHECK_SERENADE 0x40
/*
* AMD SouthBridge chips.
*/
static struct amd_ide_chip {
unsigned short id;
u8 base;
u8 udma_mask;
u8 flags;
} amd_ide_chips[] = {
{ PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
{ PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO },
{ PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, },
{ PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
{ PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, },
{ 0 }
enum {
AMD_IDE_CONFIG = 0x41,
AMD_CABLE_DETECT = 0x42,
AMD_DRIVE_TIMING = 0x48,
AMD_8BIT_TIMING = 0x4e,
AMD_ADDRESS_SETUP = 0x4c,
AMD_UDMA_TIMING = 0x50,
};
static struct amd_ide_chip *amd_config;
static const struct ide_port_info *amd_chipset;
static unsigned int amd_80w;
static unsigned int amd_clock;
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
static inline u8 amd_offset(struct pci_dev *dev)
{
return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
}
/*
* amd_set_speed() writes timing values to the chipset registers
*/
static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing)
static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
struct ide_timing *timing)
{
unsigned char t;
u8 t = 0, offset = amd_offset(dev);
pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t);
pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t);
pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)),
pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
switch (amd_config->udma_mask) {
switch (udma_mask) {
case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
@ -110,7 +73,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
default: return;
}
pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
}
/*
@ -120,12 +83,15 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
u8 udma_mask = hwif->ultra_mask;
T = 1000000000 / amd_clock;
UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
ide_timing_compute(drive, speed, &t, T, UT);
@ -137,7 +103,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
amd_set_speed(dev, drive->dn, udma_mask, &t);
}
/*
@ -149,67 +115,68 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
amd_set_drive(drive, XFER_PIO_0 + pio);
}
/*
* The initialization callback. Here we determine the IDE chip type
* and initialize its drive independent registers.
*/
static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name)
static void __devinit amd7409_cable_detect(struct pci_dev *dev,
const char *name)
{
/* no host side cable detection */
amd_80w = 0x03;
}
static void __devinit amd7411_cable_detect(struct pci_dev *dev,
const char *name)
{
unsigned char t;
unsigned int u;
int i;
u32 u = 0;
u8 t = 0, offset = amd_offset(dev);
pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
printk(KERN_WARNING "%s: BIOS didn't set cable bits "
"correctly. Enabling workaround.\n",
name);
amd_80w |= (1 << (1 - (i >> 4)));
}
}
/*
* Check for bad SWDMA.
* The initialization callback. Initialize drive independent registers.
*/
if (amd_config->flags & AMD_CHECK_SWDMA) {
if (dev->revision <= 7)
amd_config->flags |= AMD_BAD_SWDMA;
}
static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
const char *name)
{
u8 t = 0, offset = amd_offset(dev);
/*
* Check 80-wire cable presence.
*/
switch (amd_config->udma_mask) {
case ATA_UDMA6:
case ATA_UDMA5:
pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
amd_chipset->name);
amd_80w |= (1 << (1 - (i >> 4)));
}
break;
case ATA_UDMA4:
/* no host side cable detection */
amd_80w = 0x03;
break;
}
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
; /* no UDMA > 2 */
else if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
amd7409_cable_detect(dev, name);
else
amd7411_cable_detect(dev, name);
/*
* Take care of prefetch & postwrite.
*/
pci_read_config_byte(dev, AMD_IDE_CONFIG, &t);
pci_write_config_byte(dev, AMD_IDE_CONFIG,
(amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
/*
* Take care of incorrectly wired Serenade mainboards.
*/
if ((amd_config->flags & AMD_CHECK_SERENADE) &&
dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
amd_config->udma_mask = ATA_UDMA5;
pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
/*
* Check for broken FIFO support.
*/
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
t &= 0x0f;
else
t |= 0xf0;
pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
/*
* Determine the system bus clock.
@ -225,25 +192,19 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
if (amd_clock < 20000 || amd_clock > 50000) {
printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
amd_chipset->name, amd_clock);
name, amd_clock);
amd_clock = 33333;
}
/*
* Print the boot message.
*/
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
amd_chipset->name, pci_name(dev), dev->revision,
amd_dma[fls(amd_config->udma_mask) - 1]);
return dev->irq;
}
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (hwif->irq == 0) /* 0 is bogus but will do for now */
hwif->irq = pci_get_legacy_ide_irq(hwif->pci_dev, hwif->channel);
hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
@ -251,10 +212,6 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
hwif->ultra_mask = amd_config->udma_mask;
if (amd_config->flags & AMD_BAD_SWDMA)
hwif->swdma_mask = 0x00;
if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
if ((amd_80w >> hwif->channel) & 1)
hwif->cbl = ATA_CBL_PATA80;
@ -272,7 +229,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
IDE_HFLAG_UNMASK_IRQS | \
IDE_HFLAG_BOOTABLE)
#define DECLARE_AMD_DEV(name_str) \
#define DECLARE_AMD_DEV(name_str, swdma, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
@ -280,11 +237,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.swdma_mask = swdma, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
}
#define DECLARE_NV_DEV(name_str) \
#define DECLARE_NV_DEV(name_str, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
@ -294,45 +252,62 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
}
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
/* 0 */ DECLARE_AMD_DEV("AMD7401"),
/* 1 */ DECLARE_AMD_DEV("AMD7409"),
/* 2 */ DECLARE_AMD_DEV("AMD7411"),
/* 3 */ DECLARE_AMD_DEV("AMD7441"),
/* 4 */ DECLARE_AMD_DEV("AMD8111"),
/* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2),
/* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
/* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
/* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
/* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
/* 5 */ DECLARE_NV_DEV("NFORCE"),
/* 6 */ DECLARE_NV_DEV("NFORCE2"),
/* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"),
/* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"),
/* 9 */ DECLARE_NV_DEV("NFORCE3-150"),
/* 10 */ DECLARE_NV_DEV("NFORCE3-250"),
/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"),
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"),
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"),
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"),
/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"),
/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"),
/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"),
/* 22 */ DECLARE_AMD_DEV("AMD5536"),
/* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5),
/* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6),
/* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6),
/* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6),
/* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6),
/* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6),
/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6),
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6),
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6),
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6),
/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6),
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6),
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6),
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6),
/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6),
/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6),
/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6),
/* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
amd_chipset = amd74xx_chipsets + id->driver_data;
amd_config = amd_ide_chips + id->driver_data;
if (dev->device != amd_config->id) {
printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n",
pci_name(dev), dev->device, amd_config->id);
return -ENODEV;
struct ide_port_info d;
u8 idx = id->driver_data;
d = amd74xx_chipsets[idx];
/*
* Check for bad SWDMA and incorrectly wired Serenade mainboards.
*/
if (idx == 1) {
if (dev->revision <= 7)
d.swdma_mask = 0;
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
} else if (idx == 4) {
if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
d.udma_mask = ATA_UDMA5;
}
return ide_setup_pci_device(dev, amd_chipset);
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
d.name, pci_name(dev), dev->revision,
amd_dma[fls(d.udma_mask) - 1]);
return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id amd74xx_pci_tbl[] = {

11
drivers/ide/pci/atiixp.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/atiixp.c Version 0.05 Nov 9 2007
*
* Copyright (C) 2003 ATI Inc. <hyu@ati.com>
* Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
*/
@ -55,7 +53,7 @@ static DEFINE_SPINLOCK(atiixp_lock);
static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 pio_timing_data;
@ -88,7 +86,7 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 tmp32;
@ -133,9 +131,8 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
{
u8 udma_mode = 0;
u8 ch = hwif->channel;
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u8 udma_mode = 0, ch = hwif->channel;
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->set_dma_mode = &atiixp_set_dma_mode;

2
drivers/ide/pci/cmd640.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
*
* Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
*/

20
drivers/ide/pci/cmd64x.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/cmd64x.c Version 1.53 Dec 24, 2007
*
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Due to massive hardware bugs, UltraDMA is only supported
* on the 646U2 and not on the 646U.
@ -71,7 +69,7 @@ static u8 quantize_timing(int timing, int quant)
*/
static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int clock_time = 1000 / system_bus_clock();
u8 cycle_count, active_count, recovery_count, drwtim;
static const u8 recovery_values[] =
@ -118,7 +116,7 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int cycle_time;
u8 setup_count, arttim = 0;
@ -183,7 +181,7 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
@ -245,7 +243,7 @@ static int cmd648_ide_dma_end (ide_drive_t *drive)
static int cmd64x_ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int irq_reg = hwif->channel ? ARTTIM23 : CFR;
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
@ -285,7 +283,7 @@ static int cmd648_ide_dma_test_irq (ide_drive_t *drive)
static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int irq_reg = hwif->channel ? ARTTIM23 : CFR;
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
@ -375,7 +373,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
switch (dev->device) {
@ -390,7 +388,7 @@ static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
@ -443,7 +441,9 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
.init_chipset = init_chipset_cmd64x,
.init_hwif = init_hwif_cmd64x,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_ABUSE_PREFETCH |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */

2
drivers/ide/pci/cs5520.c
Просмотреть файл

@ -69,7 +69,7 @@ static struct pio_clocks cs5520_pio_clocks[]={
static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
int controller = drive->dn > 1 ? 1 : 0;
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */

2
drivers/ide/pci/cs5530.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/cs5530.c Version 0.77 Sep 24 2007
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz

6
drivers/ide/pci/cs5535.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/cs5535.c
*
* Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@ -177,13 +175,15 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
*/
static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->set_dma_mode = &cs5535_set_dma_mode;
if (hwif->dma_base == 0)
return;
hwif->cbl = cs5535_cable_detect(hwif->pci_dev);
hwif->cbl = cs5535_cable_detect(dev);
}
static const struct ide_port_info cs5535_chipset __devinitdata = {

7
drivers/ide/pci/cy82c693.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/cy82c693.c Version 0.44 Nov 8, 2007
*
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
*
@ -228,7 +226,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
pio_clocks_t pclk;
unsigned int addrCtrl;
@ -397,8 +395,9 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (PCI_FUNC(hwif->pci_dev->devfn) == 1)
if (PCI_FUNC(dev->devfn) == 1)
primary = hwif;
else {
hwif->mate = primary;

4
drivers/ide/pci/delkin_cb.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/delkin_cb.c
*
* Created 20 Oct 2004 by Mark Lord
*
* Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
@ -87,7 +85,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
pci_set_drvdata(dev, hwif);
hwif->pci_dev = dev;
hwif->dev = &dev->dev;
drive = &hwif->drives[0];
if (drive->present) {
drive->io_32bit = 1;

5
drivers/ide/pci/generic.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/generic.c Version 0.11 December 30, 2002
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
*
@ -104,7 +102,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = {
{ /* 14 */
.name = "Revolution",
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,

6
drivers/ide/pci/hpt34x.c
Просмотреть файл

@ -1,7 +1,6 @@
/*
* linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
*
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
*
* May be copied or modified under the terms of the GNU General Public License
*
*
@ -45,7 +44,7 @@
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;
@ -131,6 +130,7 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
#define IDE_HFLAGS_HPT34X \
(IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_NO_DSC | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_NO_AUTODMA)

33
drivers/ide/pci/hpt366.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/hpt366.c Version 1.30 Dec 12, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
@ -626,7 +624,8 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
@ -665,7 +664,8 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
switch (info->chip_type) {
case HPT372 :
@ -699,7 +699,7 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
@ -742,7 +742,7 @@ static void hpt3xx_quirkproc(ide_drive_t *drive)
static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
if (drive->quirk_list) {
@ -774,7 +774,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
*/
static void hpt366_dma_lost_irq(ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
pci_read_config_byte(dev, 0x50, &mcr1);
@ -790,18 +790,20 @@ static void hpt366_dma_lost_irq(ide_drive_t *drive)
static void hpt370_clear_engine(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
pci_write_config_byte(dev, hwif->select_data, 0x37);
udelay(10);
}
static void hpt370_irq_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_cmd;
pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
/* get DMA command mode */
@ -844,10 +846,11 @@ static void hpt370_dma_timeout(ide_drive_t *drive)
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 bfifo = 0;
u8 dma_stat;
pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
if (bfifo & 0x1FF) {
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
return 0;
@ -867,7 +870,7 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
static int hpt374_ide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr = 0, mcr_addr = hwif->select_data;
u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
@ -942,7 +945,7 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
static int hpt3xx_busproc(ide_drive_t *drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 mcr_addr = hwif->select_data + 2;
u8 resetmask = hwif->channel ? 0x80 : 0x40;
u8 bsr2 = 0;
@ -1278,7 +1281,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
@ -1393,7 +1396,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 masterdma = 0, slavedma = 0;
u8 dma_new = 0, dma_old = 0;
unsigned long flags;
@ -1413,7 +1416,7 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
local_irq_restore(flags);
ide_setup_dma(hwif, dmabase, 8);
ide_setup_dma(hwif, dmabase);
}
static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)

7
drivers/ide/pci/it8213.c
Просмотреть файл

@ -28,7 +28,7 @@
static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = 0x40;
int slave_port = 0x44;
@ -85,7 +85,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = 0x40;
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
@ -152,6 +152,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg42h = 0;
hwif->set_dma_mode = &it8213_set_dma_mode;
@ -160,7 +161,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
pci_read_config_byte(hwif->pci_dev, 0x42, &reg42h);
pci_read_config_byte(dev, 0x42, &reg42h);
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;

50
drivers/ide/pci/it821x.c
Просмотреть файл

@ -1,7 +1,4 @@
/*
* linux/drivers/ide/pci/it821x.c Version 0.16 Jul 3 2007
*
* Copyright (C) 2004 Red Hat <alan@redhat.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@ -113,7 +110,8 @@ static int it8212_noraid;
static void it821x_program(ide_drive_t *drive, u16 timing)
{
ide_hwif_t *hwif = drive->hwif;
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
u8 conf;
@ -123,7 +121,8 @@ static void it821x_program(ide_drive_t *drive, u16 timing)
conf = timing >> 8;
else
conf = timing & 0xFF;
pci_write_config_byte(hwif->pci_dev, 0x54 + 4 * channel, conf);
pci_write_config_byte(dev, 0x54 + 4 * channel, conf);
}
/**
@ -137,7 +136,8 @@ static void it821x_program(ide_drive_t *drive, u16 timing)
static void it821x_program_udma(ide_drive_t *drive, u16 timing)
{
ide_hwif_t *hwif = drive->hwif;
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
int unit = drive->select.b.unit;
@ -148,11 +148,12 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
conf = timing >> 8;
else
conf = timing & 0xFF;
if(itdev->timing10 == 0)
pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel + unit, conf);
if (itdev->timing10 == 0)
pci_write_config_byte(dev, 0x56 + 4 * channel + unit, conf);
else {
pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel, conf);
pci_write_config_byte(hwif->pci_dev, 0x56 + 4 * channel + 1, conf);
pci_write_config_byte(dev, 0x56 + 4 * channel, conf);
pci_write_config_byte(dev, 0x56 + 4 * channel + 1, conf);
}
}
@ -167,6 +168,7 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
static void it821x_clock_strategy(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
u8 unit = drive->select.b.unit;
@ -205,10 +207,11 @@ static void it821x_clock_strategy(ide_drive_t *drive)
itdev->clock_mode = ATA_50;
sel = 1;
}
pci_read_config_byte(hwif->pci_dev, 0x50, &v);
pci_read_config_byte(dev, 0x50, &v);
v &= ~(1 << (1 + hwif->channel));
v |= sel << (1 + hwif->channel);
pci_write_config_byte(hwif->pci_dev, 0x50, v);
pci_write_config_byte(dev, 0x50, v);
/*
* Reprogram the UDMA/PIO of the pair drive for the switch
@ -282,7 +285,8 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
{
ide_hwif_t *hwif = drive->hwif;
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
int channel = hwif->channel;
@ -297,12 +301,12 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
itdev->udma[unit] = UDMA_OFF;
/* UDMA bits off - Revision 0x10 do them in pairs */
pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
if(itdev->timing10)
pci_read_config_byte(dev, 0x50, &conf);
if (itdev->timing10)
conf |= channel ? 0x60: 0x18;
else
conf |= 1 << (3 + 2 * channel + unit);
pci_write_config_byte(hwif->pci_dev, 0x50, conf);
pci_write_config_byte(dev, 0x50, conf);
it821x_clock_strategy(drive);
/* FIXME: do we need to program this ? */
@ -320,7 +324,8 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
{
ide_hwif_t *hwif = drive->hwif;
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
int channel = hwif->channel;
@ -337,12 +342,12 @@ static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */
/* UDMA on. Again revision 0x10 must do the pair */
pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
if(itdev->timing10)
pci_read_config_byte(dev, 0x50, &conf);
if (itdev->timing10)
conf &= channel ? 0x9F: 0xE7;
else
conf &= ~ (1 << (3 + 2 * channel + unit));
pci_write_config_byte(hwif->pci_dev, 0x50, conf);
pci_write_config_byte(dev, 0x50, conf);
it821x_clock_strategy(drive);
it821x_program_udma(drive, itdev->udma[unit]);
@ -520,6 +525,7 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive)
static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL);
u8 conf;
@ -532,7 +538,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
ide_set_hwifdata(hwif, idev);
pci_read_config_byte(hwif->pci_dev, 0x50, &conf);
pci_read_config_byte(dev, 0x50, &conf);
if (conf & 1) {
idev->smart = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
@ -555,7 +561,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
* this is necessary.
*/
pci_read_config_byte(hwif->pci_dev, 0x08, &conf);
pci_read_config_byte(dev, 0x08, &conf);
if (conf == 0x10) {
idev->timing10 = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;

2
drivers/ide/pci/jmicron.c
Просмотреть файл

@ -30,7 +30,7 @@ typedef enum {
static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
{
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 control;
u32 control5;

20
drivers/ide/pci/ns87415.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
*
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
@ -71,10 +69,9 @@ static u8 superio_ide_inb (unsigned long port)
static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 base, dmabase;
u8 tmp;
struct pci_dev *pdev = hwif->pci_dev;
u8 port = hwif->channel;
u8 port = hwif->channel, tmp;
base = pci_resource_start(pdev, port * 2) & ~3;
dmabase = pci_resource_start(pdev, 4) & ~3;
@ -93,10 +90,11 @@ static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
{
if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) {
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (PCI_SLOT(dev->devfn) == 0xE)
/* Built-in - assume it's under superio. */
superio_ide_init_iops(hwif);
}
}
#endif
@ -110,8 +108,8 @@ static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
struct pci_dev *dev = hwif->pci_dev;
unsigned long flags;
local_irq_save(flags);
@ -189,7 +187,7 @@ static int ns87415_ide_dma_setup(ide_drive_t *drive)
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int ctrl, using_inta;
u8 progif;
#ifdef __sparc_v9__
@ -231,8 +229,8 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
#ifdef __sparc_v9__
/*
* XXX: Reset the device, if we don't it will not respond
* to SELECT_DRIVE() properly during first probe_hwif().
* XXX: Reset the device, if we don't it will not respond to
* SELECT_DRIVE() properly during first ide_probe_port().
*/
timeout = 10000;
outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]);

2
drivers/ide/pci/opti621.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/opti621.c Version 0.9 Sep 24, 2007
*
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/

6
drivers/ide/pci/pdc202xx_new.c
Просмотреть файл

@ -149,6 +149,7 @@ static struct udma_timing {
static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
/*
@ -159,7 +160,7 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
* As we set up the PLL to output 133 MHz for UltraDMA/133 capable
* chips, we must override the default register settings...
*/
if (max_dma_rate(hwif->pci_dev) == 4) {
if (max_dma_rate(dev) == 4) {
u8 mode = speed & 0x07;
if (speed >= XFER_UDMA_0) {
@ -186,9 +187,10 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
if (max_dma_rate(hwif->pci_dev) == 4) {
if (max_dma_rate(dev) == 4) {
set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);

17
drivers/ide/pci/pdc202xx_old.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/pdc202xx_old.c Version 0.52 Aug 27, 2007
*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
@ -66,7 +64,7 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 AP = 0, BP = 0, CP = 0;
@ -144,9 +142,10 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
pci_read_config_word(hwif->pci_dev, 0x50, &CIS);
pci_read_config_word(dev, 0x50, &CIS);
return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}
@ -305,12 +304,14 @@ static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &pdc202xx_set_pio_mode;
hwif->set_dma_mode = &pdc202xx_set_mode;
hwif->quirkproc = &pdc202xx_quirkproc;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
hwif->resetproc = &pdc202xx_reset;
if (hwif->dma_base == 0)
@ -319,7 +320,7 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->dma_lost_irq = &pdc202xx_dma_lost_irq;
hwif->dma_timeout = &pdc202xx_dma_timeout;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) {
if (dev->device != PCI_DEVICE_ID_PROMISE_20246) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = pdc202xx_old_cable_detect(hwif);
@ -334,7 +335,7 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
if (hwif->channel) {
ide_setup_dma(hwif, dmabase, 8);
ide_setup_dma(hwif, dmabase);
return;
}
@ -358,7 +359,7 @@ static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
}
#endif /* CONFIG_PDC202XX_BURST */
ide_setup_dma(hwif, dmabase, 8);
ide_setup_dma(hwif, dmabase);
}
static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,

55
drivers/ide/pci/piix.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/piix.c Version 0.54 Sep 5, 2007
*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
@ -8,53 +6,8 @@
*
* May be copied or modified under the terms of the GNU General Public License
*
* PIO mode setting function for Intel chipsets.
* For use instead of BIOS settings.
* Documentation:
*
* 40-41
* 42-43
*
* 41
* 43
*
* | PIO 0 | c0 | 80 | 0 |
* | PIO 2 | SW2 | d0 | 90 | 4 |
* | PIO 3 | MW1 | e1 | a1 | 9 |
* | PIO 4 | MW2 | e3 | a3 | b |
*
* sitre = word40 & 0x4000; primary
* sitre = word42 & 0x4000; secondary
*
* 44 8421|8421 hdd|hdb
*
* 48 8421 hdd|hdc|hdb|hda udma enabled
*
* 0001 hda
* 0010 hdb
* 0100 hdc
* 1000 hdd
*
* 4a 84|21 hdb|hda
* 4b 84|21 hdd|hdc
*
* ata-33/82371AB
* ata-33/82371EB
* ata-33/82801AB ata-66/82801AA
* 00|00 udma 0 00|00 reserved
* 01|01 udma 1 01|01 udma 3
* 10|10 udma 2 10|10 udma 4
* 11|11 reserved 11|11 reserved
*
* 54 8421|8421 ata66 drive|ata66 enable
*
* pci_read_config_word(HWIF(drive)->pci_dev, 0x40, &reg40);
* pci_read_config_word(HWIF(drive)->pci_dev, 0x42, &reg42);
* pci_read_config_word(HWIF(drive)->pci_dev, 0x44, &reg44);
* pci_read_config_byte(HWIF(drive)->pci_dev, 0x48, &reg48);
* pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, &reg4a);
* pci_read_config_byte(HWIF(drive)->pci_dev, 0x54, &reg54);
*
* Documentation
* Publically available from Intel web site. Errata documentation
* is also publically available. As an aide to anyone hacking on this
* driver the list of errata that are relevant is below.going back to
@ -116,7 +69,7 @@ static int no_piix_dma;
static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
@ -185,7 +138,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
@ -305,7 +258,7 @@ static const struct ich_laptop ich_laptop[] = {
static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct ich_laptop *lap = &ich_laptop[0];
u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;

4
drivers/ide/pci/rz1000.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
*
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
*/
@ -32,8 +30,8 @@
static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 reg;
struct pci_dev *dev = hwif->pci_dev;
if (!pci_read_config_word (dev, 0x40, &reg) &&
!pci_write_config_word(dev, 0x40, reg & 0xdfff)) {

14
drivers/ide/pci/sc1200.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/sc1200.c Version 0.97 Aug 3 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
@ -87,7 +85,7 @@ static const unsigned int sc1200_pio_timings[4][5] =
static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
pci_read_config_dword(pdev, basereg + 4, &format);
@ -130,6 +128,7 @@ out:
static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
int unit = drive->select.b.unit;
unsigned int reg, timings;
unsigned short pci_clock;
@ -160,12 +159,11 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
if (unit == 0) { /* are we configuring drive0? */
pci_read_config_dword(hwif->pci_dev, basereg+4, &reg);
pci_read_config_dword(dev, basereg + 4, &reg);
timings |= reg & 0x80000000; /* preserve PIO format bit */
pci_write_config_dword(hwif->pci_dev, basereg+4, timings);
} else {
pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
}
pci_write_config_dword(dev, basereg + 4, timings);
} else
pci_write_config_dword(dev, basereg + 12, timings);
}
/* Replacement for the standard ide_dma_end action in

13
drivers/ide/pci/scc_pata.c
Просмотреть файл

@ -594,7 +594,7 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct scc_ports *ports = pci_get_drvdata(dev);
unsigned long dma_base = ports->dma;
@ -620,7 +620,7 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
hwif->irq = hwif->pci_dev->irq;
hwif->irq = dev->irq;
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
hwif->mmio = 1;
@ -636,7 +636,8 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
static void __devinit init_iops_scc(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->hwif_data = NULL;
if (pci_get_drvdata(dev) == NULL)
return;
@ -726,10 +727,8 @@ static void __devexit scc_remove(struct pci_dev *dev)
unsigned long dma_size = pci_resource_len(dev, 1);
if (hwif->dmatable_cpu) {
pci_free_consistent(hwif->pci_dev,
PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu,
hwif->dmatable_dma);
pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}

24
drivers/ide/pci/serverworks.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/serverworks.c Version 0.22 Jun 27 2007
*
* Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@ -67,7 +65,7 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
static u8 svwks_udma_filter(ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 mask = 0;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
@ -130,7 +128,7 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
@ -153,7 +151,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 unit = (drive->select.b.unit & 0x01);
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
@ -287,7 +285,8 @@ static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
*/
static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
@ -305,7 +304,8 @@ static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
*/
static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
@ -316,7 +316,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Server Works */
if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
@ -340,6 +340,8 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
@ -347,7 +349,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_svwks(hwif);
}
@ -418,7 +420,9 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
d = serverworks_chipsets[idx];
if (idx == 2 || idx == 3) {
if (idx == 1)
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
else if (idx == 2 || idx == 3) {
if ((PCI_FUNC(dev->devfn) & 1) == 0) {
if (pci_resource_start(dev, 0) != 0x01f1)
d.host_flags &= ~IDE_HFLAG_BOOTABLE;

19
drivers/ide/pci/sgiioc4.c
Просмотреть файл

@ -159,6 +159,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
}
if (intr_reg & 0x02) {
struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Error when transferring DMA data on PCI bus */
u32 pci_err_addr_low, pci_err_addr_high,
pci_stat_cmd_reg;
@ -167,7 +168,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]);
pci_err_addr_high =
readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4));
pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
pci_read_config_dword(dev, PCI_COMMAND,
&pci_stat_cmd_reg);
printk(KERN_ERR
"%s(%s) : PCI Bus Error when doing DMA:"
@ -178,8 +179,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
__FUNCTION__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
pci_write_config_dword(hwif->pci_dev, PCI_COMMAND,
0x00000146);
pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
}
/* Clear the Interrupt, Error bits on the IOC4 */
@ -334,6 +334,7 @@ sgiioc4_INB(unsigned long port)
static int __devinit
ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
void __iomem *virt_dma_base;
int num_ports = sizeof (ioc4_dma_regs_t);
void *pad;
@ -359,7 +360,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
}
hwif->dma_base = (unsigned long) virt_dma_base;
hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
hwif->dmatable_cpu = pci_alloc_consistent(dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
&hwif->dmatable_dma);
@ -368,7 +369,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
pad = pci_alloc_consistent(hwif->pci_dev, IOC4_IDE_CACHELINE_SIZE,
pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *) &(hwif->dma_status));
if (pad) {
@ -376,8 +377,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
return 0;
}
pci_free_consistent(hwif->pci_dev,
IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
printk(KERN_INFO
"%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
@ -517,8 +517,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
}
use_pio_instead:
pci_unmap_sg(hwif->pci_dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
@ -641,7 +640,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
hw.dev = &dev->dev;
ide_init_port_hw(hwif, &hw);
hwif->pci_dev = dev;
hwif->dev = &dev->dev;
hwif->channel = 0; /* Single Channel chip */
/* The IOC4 uses MMIO rather than Port IO. */

53
drivers/ide/pci/siimage.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2007 MontaVista Software, Inc.
@ -79,7 +77,7 @@ static int pdev_is_sata(struct pci_dev *pdev)
static inline int is_sata(ide_hwif_t *hwif)
{
return pdev_is_sata(hwif->pci_dev);
return pdev_is_sata(to_pci_dev(hwif->dev));
}
/**
@ -140,13 +138,14 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
static u8 sil_pata_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long base = (unsigned long) hwif->hwif_data;
u8 mask = 0, scsc = 0;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
pci_read_config_byte(dev, 0x8A, &scsc);
if ((scsc & 0x30) == 0x10) /* 133 */
mask = ATA_UDMA6;
@ -219,19 +218,21 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
mode |= (unit ? 0x10 : 0x01);
hwif->OUTB(mode, base + addr_mask);
} else {
pci_write_config_word(hwif->pci_dev, addr, speedp);
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
struct pci_dev *dev = to_pci_dev(hwif->dev);
pci_write_config_word(dev, addr, speedp);
pci_write_config_word(dev, tfaddr, speedt);
pci_read_config_word(dev, tfaddr - 2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if (pio > 2)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
pci_write_config_word(dev, tfaddr - 2, speedp);
pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
pci_read_config_byte(dev, addr_mask, &mode);
mode &= ~(unit ? 0x30 : 0x03);
mode |= (unit ? 0x10 : 0x01);
pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
pci_write_config_byte(dev, addr_mask, mode);
}
}
@ -250,6 +251,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
@ -266,10 +268,10 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
multi = hwif->INW(ma);
ultra = hwif->INW(ua);
} else {
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
pci_read_config_word(hwif->pci_dev, ma, &multi);
pci_read_config_word(hwif->pci_dev, ua, &ultra);
pci_read_config_byte(dev, 0x8A, &scsc);
pci_read_config_byte(dev, addr_mask, &mode);
pci_read_config_word(dev, ma, &multi);
pci_read_config_word(dev, ua, &ultra);
}
mode &= ~((unit) ? 0x30 : 0x03);
@ -293,9 +295,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
hwif->OUTW(multi, ma);
hwif->OUTW(ultra, ua);
} else {
pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
pci_write_config_word(hwif->pci_dev, ma, multi);
pci_write_config_word(hwif->pci_dev, ua, ultra);
pci_write_config_byte(dev, addr_mask, mode);
pci_write_config_word(dev, ma, multi);
pci_write_config_word(dev, ua, ultra);
}
}
@ -303,6 +305,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 dma_altstat = 0;
unsigned long addr = siimage_selreg(hwif, 1);
@ -311,7 +314,7 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
return 1;
/* return 1 if Device INTR asserted */
pci_read_config_byte(hwif->pci_dev, addr, &dma_altstat);
pci_read_config_byte(dev, addr, &dma_altstat);
if (dma_altstat & 8)
return 0; //return 1;
return 0;
@ -377,13 +380,14 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
static int sil_sata_busproc(ide_drive_t * drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 stat_config = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio)
stat_config = readl((void __iomem *)addr);
else
pci_read_config_dword(hwif->pci_dev, addr, &stat_config);
pci_read_config_dword(dev, addr, &stat_config);
switch (state) {
case BUSSTATE_ON:
@ -643,7 +647,7 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
hw_regs_t hw;
@ -756,12 +760,14 @@ static void __devinit sil_quirkproc(ide_drive_t *drive)
static void __devinit init_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
hwif->hwif_data = NULL;
/* Pessimal until we finish probing */
hwif->rqsize = 15;
if (pci_get_drvdata(hwif->pci_dev) == NULL)
if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_siimage(hwif);
@ -777,11 +783,12 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
static u8 __devinit ata66_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long addr = siimage_selreg(hwif, 0);
u8 ata66 = 0;
if (pci_get_drvdata(hwif->pci_dev) == NULL)
pci_read_config_byte(hwif->pci_dev, addr, &ata66);
if (pci_get_drvdata(dev) == NULL)
pci_read_config_byte(dev, addr, &ata66);
else
ata66 = hwif->INB(addr);

24
drivers/ide/pci/sis5513.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/sis5513.c Version 0.31 Aug 9, 2007
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
@ -197,7 +195,7 @@ static char* chipset_capability[] = {
static u8 sis_ata133_get_base(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg54 = 0;
pci_read_config_dword(dev, 0x54, &reg54);
@ -207,7 +205,7 @@ static u8 sis_ata133_get_base(ide_drive_t *drive)
static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u16 t1 = 0;
u8 drive_pci = 0x40 + drive->dn * 2;
@ -230,7 +228,7 @@ static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 t1, drive_pci = 0x40 + drive->dn * 2;
/* timing bits: 7:4 active 3:0 recovery */
@ -253,7 +251,7 @@ static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 t1 = 0;
u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
@ -286,7 +284,7 @@ static void sis_program_timings(ide_drive_t *drive, const u8 mode)
static void config_drive_art_rwp (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg4bh = 0;
u8 rw_prefetch = 0;
@ -307,7 +305,7 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 regdw = 0;
u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
@ -326,7 +324,7 @@ static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
pci_read_config_byte(dev, drive_pci + 1, &reg);
@ -359,7 +357,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 regdw = 0;
u8 drive_pci = sis_ata133_get_base(drive);
@ -530,7 +528,7 @@ static const struct sis_laptop sis_laptop[] = {
static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
{
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct sis_laptop *lap = &sis_laptop[0];
u8 ata66 = 0;
@ -545,12 +543,12 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
if (chipset_family >= ATA_133) {
u16 regw = 0;
u16 reg_addr = hwif->channel ? 0x52: 0x50;
pci_read_config_word(hwif->pci_dev, reg_addr, &regw);
pci_read_config_word(pdev, reg_addr, &regw);
ata66 = (regw & 0x8000) ? 0 : 1;
} else if (chipset_family >= ATA_66) {
u8 reg48h = 0;
u8 mask = hwif->channel ? 0x20 : 0x10;
pci_read_config_byte(hwif->pci_dev, 0x48, &reg48h);
pci_read_config_byte(pdev, 0x48, &reg48h);
ata66 = (reg48h & mask) ? 0 : 1;
}

19
drivers/ide/pci/sl82c105.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/sl82c105.c
*
* SL82C105/Winbond 553 IDE driver
*
* Maintainer unknown.
@ -78,7 +76,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
*/
static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
@ -147,7 +145,7 @@ static inline void sl82c105_reset_host(struct pci_dev *dev)
static void sl82c105_dma_lost_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
u8 dma_cmd;
@ -184,7 +182,7 @@ static void sl82c105_dma_lost_irq(ide_drive_t *drive)
static void sl82c105_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int reg = 0x44 + drive->dn * 4;
DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name));
@ -197,15 +195,17 @@ static void sl82c105_dma_start(ide_drive_t *drive)
static void sl82c105_dma_timeout(ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
sl82c105_reset_host(HWIF(drive)->pci_dev);
sl82c105_reset_host(dev);
ide_dma_timeout(drive);
}
static int sl82c105_dma_end(ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
int ret;
@ -224,7 +224,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
*/
static void sl82c105_resetproc(ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
@ -293,6 +293,7 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
*/
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int rev;
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
@ -304,7 +305,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
if (!hwif->dma_base)
return;
rev = sl82c105_bridge_revision(hwif->pci_dev);
rev = sl82c105_bridge_revision(dev);
if (rev <= 5) {
/*
* Never ever EVER under any circumstances enable

9
drivers/ide/pci/slc90e66.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/pci/slc90e66.c Version 0.19 Sep 24, 2007
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
*
@ -26,7 +24,7 @@ static DEFINE_SPINLOCK(slc90e66_lock);
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
@ -79,7 +77,7 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 maslave = hwif->channel ? 0x42 : 0x40;
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
@ -122,13 +120,14 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 reg47 = 0;
u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);
pci_read_config_byte(dev, 0x47, &reg47);
if (hwif->dma_base == 0)
return;

5
drivers/ide/pci/tc86c001.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* drivers/ide/pci/tc86c001.c Version 1.01 Sep 5, 2007
*
* Copyright (C) 2002 Toshiba Corporation
* Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
*
@ -164,7 +162,8 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
{
unsigned long sc_base = pci_resource_start(hwif->pci_dev, 5);
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long sc_base = pci_resource_start(dev, 5);
u16 scr1 = inw(sc_base + 0x00);
/* System Control 1 Register bit 15 (Soft Reset) set */

4
drivers/ide/pci/triflex.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* triflex.c
*
* IDE Chipset driver for the Compaq TriFlex IDE controller.
*
* Known to work with the Compaq Workstation 5x00 series.
@ -43,7 +41,7 @@
static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 channel_offset = hwif->channel ? 0x74 : 0x70;
u16 timing = 0;
u32 triflex_timings = 0;

63
drivers/ide/pci/trm290.c
Просмотреть файл

@ -1,8 +1,7 @@
/*
* linux/drivers/ide/pci/trm290.c Version 1.05 Dec. 26, 2007
*
* Copyright (c) 1997-1998 Mark Lord
* Copyright (c) 2007 MontaVista Software, Inc. <source@mvista.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
* June 22, 2004 - get rid of check_region
@ -209,10 +208,10 @@ static int trm290_dma_setup(ide_drive_t *drive)
}
/* select DMA xfer */
trm290_prepare_drive(drive, 1);
outl(hwif->dmatable_dma | rw, hwif->dma_command);
outl(hwif->dmatable_dma | rw, hwif->dma_base);
drive->waiting_for_dma = 1;
/* start DMA */
outw((count * 2) - 1, hwif->dma_status);
outw(count * 2 - 1, hwif->dma_base + 2);
return 0;
}
@ -222,23 +221,21 @@ static void trm290_dma_start(ide_drive_t *drive)
static int trm290_ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u16 status = 0;
u16 status;
drive->waiting_for_dma = 0;
/* purge DMA mappings */
ide_destroy_dmatable(drive);
status = inw(hwif->dma_status);
return (status != 0x00ff);
status = inw(HWIF(drive)->dma_base + 2);
return status != 0x00ff;
}
static int trm290_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u16 status = 0;
u16 status;
status = inw(hwif->dma_status);
return (status == 0x00ff);
status = inw(HWIF(drive)->dma_base + 2);
return status == 0x00ff;
}
static void trm290_dma_host_set(ide_drive_t *drive, int on)
@ -247,21 +244,37 @@ static void trm290_dma_host_set(ide_drive_t *drive, int on)
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
unsigned int cfgbase = 0;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int cfg_base = pci_resource_start(dev, 4);
unsigned long flags;
u8 reg = 0;
struct pci_dev *dev = hwif->pci_dev;
cfgbase = pci_resource_start(dev, 4);
if ((dev->class & 5) && cfgbase) {
hwif->config_data = cfgbase;
printk(KERN_INFO "TRM290: chip config base at 0x%04lx\n",
hwif->config_data);
} else {
hwif->config_data = 0x3df0;
printk(KERN_INFO "TRM290: using default config base at 0x%04lx\n",
hwif->config_data);
if ((dev->class & 5) && cfg_base)
printk(KERN_INFO "TRM290: chip");
else {
cfg_base = 0x3df0;
printk(KERN_INFO "TRM290: using default");
}
printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
hwif->config_data = cfg_base;
hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0);
printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
hwif->name, hwif->dma_base, hwif->dma_base + 3);
if (!request_region(hwif->dma_base, 4, hwif->name)) {
printk(KERN_CONT " -- Error, ports in use.\n");
return;
}
hwif->dmatable_cpu = pci_alloc_consistent(dev, PRD_ENTRIES * PRD_BYTES,
&hwif->dmatable_dma);
if (!hwif->dmatable_cpu) {
printk(KERN_CONT " -- Error, unable to allocate DMA table.\n");
release_region(hwif->dma_base, 4);
return;
}
printk(KERN_CONT "\n");
local_irq_save(flags);
/* put config reg into first byte of hwif->select_data */
@ -276,15 +289,13 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
outb(reg, hwif->config_data + 3);
local_irq_restore(flags);
if ((reg & 0x10))
if (reg & 0x10)
/* legacy mode */
hwif->irq = hwif->channel ? 15 : 14;
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
/* sharing IRQ with mate */
hwif->irq = hwif->mate->irq;
ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3);
hwif->dma_host_set = &trm290_dma_host_set;
hwif->dma_setup = &trm290_dma_setup;
hwif->dma_exec_cmd = &trm290_dma_exec_cmd;

15
drivers/ide/pci/via82cxxx.c
Просмотреть файл

@ -1,7 +1,4 @@
/*
*
* Version 3.50
*
* VIA IDE driver for Linux. Supported southbridges:
*
* vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
@ -121,8 +118,8 @@ struct via82cxxx_dev
static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
{
struct pci_dev *dev = hwif->pci_dev;
struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
u8 t;
if (~vdev->via_config->flags & VIA_BAD_AST) {
@ -159,8 +156,10 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
static void via_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct via82cxxx_dev *vdev = pci_get_drvdata(dev);
struct ide_timing t, p;
unsigned int T, UT;
@ -408,7 +407,7 @@ static int via_cable_override(struct pci_dev *pdev)
static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = hwif->pci_dev;
struct pci_dev *pdev = to_pci_dev(hwif->dev);
struct via82cxxx_dev *vdev = pci_get_drvdata(pdev);
if (via_cable_override(pdev))

2
drivers/ide/ppc/mpc8xx.c
Просмотреть файл

@ -1,6 +1,4 @@
/*
* linux/drivers/ide/ppc/ide-m8xx.c
*
* Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de
* Modified for direct IDE interface
* by Thomas Lange, thomas@corelatus.com

39
drivers/ide/ppc/pmac.c
Просмотреть файл

@ -1,7 +1,6 @@
/*
* linux/drivers/ide/ppc/pmac.c
*
* Support for IDE interfaces on PowerMacs.
*
* These IDE interfaces are memory-mapped and have a DBDMA channel
* for doing DMA.
*
@ -1011,7 +1010,7 @@ pmac_ide_do_resume(ide_hwif_t *hwif)
* (it is kept in 2.4). This introduce an interface numbering change on some
* rare machines unfortunately, but it's better this way.
*/
static int
static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
{
struct device_node *np = pmif->node;
@ -1200,7 +1199,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
base = ioremap(macio_resource_start(mdev, 0), 0x400);
regbase = (unsigned long) base;
hwif->pci_dev = mdev->bus->pdev;
hwif->dev = &mdev->bus->pdev->dev;
pmif->mdev = mdev;
pmif->node = mdev->ofdev.node;
@ -1228,12 +1227,12 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
/* The inteface is released to the common IDE layer */
dev_set_drvdata(&mdev->ofdev.dev, NULL);
iounmap(base);
if (pmif->dma_regs)
if (pmif->dma_regs) {
iounmap(pmif->dma_regs);
macio_release_resource(mdev, 1);
}
memset(pmif, 0, sizeof(*pmif));
macio_release_resource(mdev, 0);
if (pmif->dma_regs)
macio_release_resource(mdev, 1);
}
return rc;
@ -1315,7 +1314,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENXIO;
}
hwif->pci_dev = pdev;
hwif->dev = &pdev->dev;
pmif->mdev = NULL;
pmif->node = np;
@ -1535,11 +1534,10 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
}
printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
use_pio_instead:
pci_unmap_sg(hwif->pci_dev,
hwif->sg_table,
hwif->sg_nents,
hwif->sg_dma_direction);
use_pio_instead:
ide_destroy_dmatable(drive);
return 0; /* revert to PIO for this request */
}
@ -1548,12 +1546,9 @@ static void
pmac_ide_destroy_dmatable (ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = HWIF(drive)->pci_dev;
struct scatterlist *sg = hwif->sg_table;
int nents = hwif->sg_nents;
if (nents) {
pci_unmap_sg(dev, sg, nents, hwif->sg_dma_direction);
if (hwif->sg_nents) {
ide_destroy_dmatable(drive);
hwif->sg_nents = 0;
}
}
@ -1726,13 +1721,15 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
* Allocate the data structures needed for using DMA with an interface
* and fill the proper list of functions pointers
*/
static void __init
static void __devinit
pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
/* We won't need pci_dev if we switch to generic consistent
* DMA routines ...
*/
if (hwif->pci_dev == NULL)
if (dev == NULL)
return;
/*
* Allocate space for the DBDMA commands.
@ -1740,7 +1737,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
* aligning the start address to a multiple of 16 bytes.
*/
pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
hwif->pci_dev,
dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
if (pmif->dma_table_cpu == NULL) {

92
drivers/ide/setup-pci.c
Просмотреть файл

@ -1,9 +1,8 @@
/*
* linux/drivers/ide/setup-pci.c Version 1.10 2002/08/19
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 1995-1998 Mark Lord
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* Copyright (c) 1998-2000 Andre Hedrick <andre@linux-ide.org>
*
* Copyright (c) 1995-1998 Mark Lord
* May be copied or modified under the terms of the GNU General Public License
*/
@ -140,6 +139,16 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
{
u8 dma_stat = inb(dma_base + 2);
outb(dma_stat & 0x60, dma_base + 2);
dma_stat = inb(dma_base + 2);
if (dma_stat & 0x80)
printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
}
/**
* ide_get_or_set_dma_base - setup BMIBA
* @d: IDE port info
@ -152,8 +161,9 @@ static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif)
{
unsigned long dma_base = 0;
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = 0;
u8 dma_stat = 0;
if (hwif->mmio)
return hwif->dma_base;
@ -174,52 +184,30 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_
if (hwif->channel)
dma_base += 8;
if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
u8 simplex_stat = 0;
if (d->host_flags & IDE_HFLAG_CS5520)
goto out;
switch(dev->device) {
case PCI_DEVICE_ID_AL_M5219:
case PCI_DEVICE_ID_AL_M5229:
case PCI_DEVICE_ID_AMD_VIPER_7409:
case PCI_DEVICE_ID_CMD_643:
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
case PCI_DEVICE_ID_REVOLUTION:
simplex_stat = inb(dma_base + 2);
outb(simplex_stat & 0x60, dma_base + 2);
simplex_stat = inb(dma_base + 2);
if (simplex_stat & 0x80) {
printk(KERN_INFO "%s: simplex device: "
"DMA forced\n",
d->name);
}
break;
default:
/*
* If the device claims "simplex" DMA,
* this means only one of the two interfaces
* can be trusted with DMA at any point in time.
* So we should enable DMA only on one of the
* two interfaces.
*/
simplex_stat = hwif->INB(dma_base + 2);
if (simplex_stat & 0x80) {
/* simplex device? */
/*
* At this point we haven't probed the drives so we can't make the
* appropriate decision. Really we should defer this problem
* until we tune the drive then try to grab DMA ownership if we want
* to be the DMA end. This has to be become dynamic to handle hot
* plug.
*/
if (hwif->mate && hwif->mate->dma_base) {
printk(KERN_INFO "%s: simplex device: "
"DMA disabled\n",
d->name);
dma_base = 0;
}
}
}
if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
ide_pci_clear_simplex(dma_base, d->name);
goto out;
}
/*
* If the device claims "simplex" DMA, this means that only one of
* the two interfaces can be trusted with DMA at any point in time
* (so we should enable DMA only on one of the two interfaces).
*
* FIXME: At this point we haven't probed the drives so we can't make
* the appropriate decision. Really we should defer this problem until
* we tune the drive then try to grab DMA ownership if we want to be
* the DMA end. This has to be become dynamic to handle hot-plug.
*/
dma_stat = hwif->INB(dma_base + 2);
if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
dma_base = 0;
}
out:
return dma_base;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
@ -402,7 +390,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port
hwif->noprobe = oldnoprobe;
hwif->pci_dev = dev;
hwif->dev = &dev->dev;
hwif->cds = d;
hwif->channel = port;
@ -451,7 +439,7 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *
if (d->init_dma) {
d->init_dma(hwif, dma_base);
} else {
ide_setup_dma(hwif, dma_base, 8);
ide_setup_dma(hwif, dma_base);
}
} else {
printk(KERN_INFO "%s: %s Bus-Master DMA disabled "

5
drivers/scsi/ide-scsi.c
Просмотреть файл

@ -1,7 +1,6 @@
/*
* linux/drivers/scsi/ide-scsi.c Version 0.9 Jul 4, 1999
*
* Copyright (C) 1996 - 1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
* Copyright (C) 2004-2005 Bartlomiej Zolnierkiewicz
*/
/*

1
include/asm-mips/mach-au1x00/au1xxx_ide.h
Просмотреть файл

@ -74,7 +74,6 @@ typedef struct
struct dbdma_cmd *dma_table_cpu;
dma_addr_t dma_table_dma;
#endif
struct device *dev;
int irq;
u32 regbase;
#ifdef CONFIG_PM

14
include/linux/cdrom.h
Просмотреть файл

@ -1187,6 +1187,20 @@ struct media_event_desc {
extern int cdrom_get_media_event(struct cdrom_device_info *cdi, struct media_event_desc *med);
static inline void lba_to_msf(int lba, u8 *m, u8 *s, u8 *f)
{
lba += CD_MSF_OFFSET;
lba &= 0xffffff; /* negative lbas use only 24 bits */
*m = lba / (CD_SECS * CD_FRAMES);
lba %= (CD_SECS * CD_FRAMES);
*s = lba / CD_FRAMES;
*f = lba % CD_FRAMES;
}
static inline int msf_to_lba(u8 m, u8 s, u8 f)
{
return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
}
#endif /* End of kernel only stuff */
#endif /* _LINUX_CDROM_H */

2
include/linux/hdsmart.h
Просмотреть файл

@ -17,6 +17,7 @@
#ifndef _LINUX_HDSMART_H
#define _LINUX_HDSMART_H
#ifndef __KERNEL
#define OFFLINE_FULL_SCAN 0
#define SHORT_SELF_TEST 1
#define EXTEND_SELF_TEST 2
@ -120,5 +121,6 @@ typedef struct ata_smart_selftestlog_s {
unsigned char resevered[2];
unsigned char chksum;
} __attribute__ ((packed)) ata_smart_selftestlog_t;
#endif /* __KERNEL__ *
#endif /* _LINUX_HDSMART_H */

40
include/linux/ide.h
Просмотреть файл

@ -9,7 +9,6 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/hdreg.h>
#include <linux/hdsmart.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/interrupt.h>
@ -503,7 +502,8 @@ typedef struct hwif_s {
hwif_chipset_t chipset; /* sub-module for tuning.. */
struct pci_dev *pci_dev; /* for pci chipsets */
struct device *dev;
const struct ide_port_info *cds; /* chipset device struct */
ide_ack_intr_t *ack_intr;
@ -628,8 +628,7 @@ typedef int (ide_expiry_t)(ide_drive_t *);
typedef struct hwgroup_s {
/* irq handler, if active */
ide_startstop_t (*handler)(ide_drive_t *);
/* irq handler, suspended if active */
ide_startstop_t (*handler_save)(ide_drive_t *);
/* BOOL: protects all fields below */
volatile int busy;
/* BOOL: wake us up on timer expiry */
@ -644,25 +643,18 @@ typedef struct hwgroup_s {
/* ptr to current hwif in linked-list */
ide_hwif_t *hwif;
/* for pci chipsets */
struct pci_dev *pci_dev;
/* current request */
struct request *rq;
/* failsafe timer */
struct timer_list timer;
/* local copy of current write rq */
struct request wrq;
/* timeout value during long polls */
unsigned long poll_timeout;
/* queried upon timeouts */
int (*expiry)(ide_drive_t *);
/* ide_system_bus_speed */
int pio_clock;
int req_gen;
int req_gen_timer;
unsigned char cmd_buf[4];
} ide_hwgroup_t;
typedef struct ide_driver_s ide_driver_t;
@ -986,8 +978,6 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
void task_end_request(ide_drive_t *, struct request *, u8);
u8 wait_drive_not_busy(ide_drive_t *);
int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
@ -1017,7 +1007,6 @@ void ide_init_disk(struct gendisk *, ide_drive_t *);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
extern int ide_scan_direction;
int __init ide_scan_pcibus(void);
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
#else
@ -1096,6 +1085,10 @@ enum {
IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26),
/* host is CY82C693 */
IDE_HFLAG_CY82C693 = (1 << 27),
/* force host out of "simplex" mode */
IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
/* DSC overlap is unsupported */
IDE_HFLAG_NO_DSC = (1 << 29),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
@ -1153,12 +1146,13 @@ void ide_dma_on(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
int ide_build_sglist(ide_drive_t *, struct request *);
void ide_destroy_dmatable(ide_drive_t *);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
extern int ide_build_sglist(ide_drive_t *, struct request *);
extern int ide_build_dmatable(ide_drive_t *, struct request *);
extern void ide_destroy_dmatable(ide_drive_t *);
extern int ide_release_dma(ide_hwif_t *);
extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
extern void ide_setup_dma(ide_hwif_t *, unsigned long);
void ide_dma_host_set(ide_drive_t *, int);
extern int ide_dma_setup(ide_drive_t *);
@ -1197,6 +1191,7 @@ static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
#endif
void ide_remove_port_from_hwgroup(ide_hwif_t *);
extern int ide_hwif_request_regions(ide_hwif_t *hwif);
extern void ide_hwif_release_regions(ide_hwif_t* hwif);
extern void ide_unregister (unsigned int index);
@ -1291,9 +1286,14 @@ extern struct bus_type ide_bus_type;
#define ide_id_has_flush_cache_ext(id) \
(((id)->cfs_enable_2 & 0x2400) == 0x2400)
static inline void ide_dump_identify(u8 *id)
{
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
}
static inline int hwif_to_node(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
struct pci_dev *dev = to_pci_dev(hwif->dev);
return dev ? pcibus_to_node(dev->bus) : -1;
}