ASoC: Fixes for v3.14

A few fixes, all driver speccific ones. The DaVinci ones aren't as clear as they should be from the subject lines on the commits but they fix issues which will prevent correct operation in some use cases and only affect that particular driver so are reasonably safe. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJTBDGxAAoJELSic+t+oim95ZoP/0YCVAn+Eia9ohs6o+8bEQWb UXj6PxGlwk0z7kPsTLbffCqPlktTlrJPIpL4JPLkWPxUrS8Q/Lc1jSBS/wIfeQXs u+kjn/RR91p8yLRDaVpgp2adoh18d9YU9hYuCcoDu+gLOCzTdLOXV3IriN67Sp3p WZIORNKPaRH4uHQdtcY+ajdwduWi5fd4cF56FOS2xnq0dxJ07rFpLmdm6HaKxOB0 J9/F1h+asgdBIYmkg/+Kex1MO0OvcfCUSsYNbybXqesjfdicEHIco4IvegqBYq3F wwu5K/bJQUx4Ylah3JvNCRDlzMLSTD709hcOZsEoZmrB6cWwakrJAkBXN2N6AHUt CjzKZ+JLKovjttZ/h86MtvulQwH+T6ouVJ0CUcgNoD+pGlytl30DGB9Cn2j33jKr ix/LvFF12wES1G8poAHvskuGWONyfefFq7Ri+t+W5blitSUVVYO+5EwZC7BR0GNt bhoFxeTC2nO7tYkTTzoNEFrU/X+zy4m8dQfkaSDYnaDTtSURlOwa24qmCbI+FSTo Ti7T/NtyWzDtFbDhxxhVE8HMR1BO9X2+16zAEN4SuWotYXzab7xbh3wjOQtWa5HL toEBBY3ZQ5VFkCxe35dAXMPVp1ToQh7dTVohGE4wg7yPiorZ44ehNsSTMNaItjh5 /d2rx9Su3+X2R2xY+UqK =Kgdb -----END PGP SIGNATURE----- Merge tag 'asoc-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.14 A few fixes, all driver speccific ones. The DaVinci ones aren't as clear as they should be from the subject lines on the commits but they fix issues which will prevent correct operation in some use cases and only affect that particular driver so are reasonably safe.
2014-02-20 07:50:32 +01:00 · 2014-02-20 07:50:32 +01:00 · f31f40be8f
--- a/.gitignore
+++ b/.gitignore
@ -92,3 +92,6 @@ extra_certificates
 signing_key.priv
 signing_key.x509
 x509.genkey
+
+# Kconfig presets
+all.config
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@ -29,6 +29,8 @@ DMA-ISA-LPC.txt
 	- How to do DMA with ISA (and LPC) devices.
 DMA-attributes.txt
 	- listing of the various possible attributes a DMA region can have
+dmatest.txt
+	- how to compile, configure and use the dmatest system.
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 EDID/
@ -77,6 +79,8 @@ arm/
 	- directory with info about Linux on the ARM architecture.
 arm64/
 	- directory with info about Linux on the 64 bit ARM architecture.
+assoc_array.txt
+	- generic associative array intro.
 atomic_ops.txt
 	- semantics and behavior of atomic and bitmask operations.
 auxdisplay/
@ -87,6 +91,8 @@ bad_memory.txt
 	- how to use kernel parameters to exclude bad RAM regions.
 basic_profiling.txt
 	- basic instructions for those who wants to profile Linux kernel.
+bcache.txt
+	- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
 binfmt_misc.txt
 	- info on the kernel support for extra binary formats.
 blackfin/
@ -171,6 +177,8 @@ early-userspace/
 	- info about initramfs, klibc, and userspace early during boot.
 edac.txt
 	- information on EDAC - Error Detection And Correction
+efi-stub.txt
+	- How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
 eisa.txt
 	- info on EISA bus support.
 email-clients.txt
@ -195,8 +203,8 @@ futex-requeue-pi.txt
 	- info on requeueing of tasks from a non-PI futex to a PI futex
 gcov.txt
 	- use of GCC's coverage testing tool "gcov" with the Linux kernel
-gpio.txt
-	- overview of GPIO (General Purpose Input/Output) access conventions.
+gpio/
+	- gpio related documentation
 hid/
 	- directory with information on human interface devices
 highuid.txt
@ -255,6 +263,8 @@ kernel-docs.txt
 	- listing of various WWW + books that document kernel internals.
 kernel-parameters.txt
 	- summary listing of command line / boot prompt args for the kernel.
+kernel-per-CPU-kthreads.txt
+	- List of all per-CPU kthreads and how they introduce jitter.
 kmemcheck.txt
 	- info on dynamic checker that detects uses of uninitialized memory.
 kmemleak.txt
@ -299,8 +309,6 @@ memory-devices/
 	- directory with info on parts like the Texas Instruments EMIF driver
 memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
-memory.txt
-	- info on typical Linux memory problems.
 metag/
 	- directory with info about Linux on Meta architecture.
 mips/
@ -311,6 +319,8 @@ mmc/
 	- directory with info about the MMC subsystem
 mn10300/
 	- directory with info about the mn10300 architecture port
+module-signing.txt
+	- Kernel module signing for increased security when loading modules.
 mtd/
 	- directory with info about memory technology devices (flash)
 mono.txt
@ -343,6 +353,8 @@ pcmcia/
 	- info on the Linux PCMCIA driver.
 percpu-rw-semaphore.txt
 	- RCU based read-write semaphore optimized for locking for reading
+phy.txt
+	- Description of the generic PHY framework.
 pi-futex.txt
 	- documentation on lightweight priority inheritance futexes.
 pinctrl.txt
@ -431,6 +443,8 @@ sysrq.txt
 	- info on the magic SysRq key.
 target/
 	- directory with info on generating TCM v4 fabric .ko modules
+this_cpu_ops.txt
+	- List rationale behind and the way to use this_cpu operations.
 thermal/
 	- directory with information on managing thermal issues (CPU/temp)
 trace/
@ -469,6 +483,8 @@ wimax/
 	- directory with info about Intel Wireless Wimax Connections
 workqueue.txt
 	- information on the Concurrency Managed Workqueue implementation
+ww-mutex-design.txt
+	- Intro to Mutex wait/would deadlock handling.s
 x86/x86_64/
 	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
 xtensa/
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@ -3,7 +3,8 @@ Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
 		 Shows the list of currently configured
-		 console devices, like 'tty1 ttyS0'.
+		 tty devices used for the console,
+		 like 'tty1 ttyS0'.
 		 The last entry in the file is the active
 		 device connected to /dev/console.
 		 The file supports poll() to detect virtual
--- a/Documentation/RCU/00-INDEX
+++ b/Documentation/RCU/00-INDEX
@ -8,6 +8,8 @@ listRCU.txt
 	- Using RCU to Protect Read-Mostly Linked Lists
 lockdep.txt
 	- RCU and lockdep checking
+lockdep-splat.txt
+	- RCU Lockdep splats explained.
 NMI-RCU.txt
 	- Using RCU to Protect Dynamic NMI Handlers
 rcubarrier.txt
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@ -4,6 +4,8 @@ Booting
 	- requirements for booting
 Interrupts
 	- ARM Interrupt subsystem documentation
+IXP4xx
+	- Intel IXP4xx Network processor.
 msm
 	- MSM specific documentation
 Netwinder
@ -24,8 +26,16 @@ SPEAr
 	- ST SPEAr platform Linux Overview
 VFP/
 	- Release notes for Linux Kernel Vector Floating Point support code
+cluster-pm-race-avoidance.txt
+	- Algorithm for CPU and Cluster setup/teardown
 empeg/
 	- Ltd's Empeg MP3 Car Audio Player
+firmware.txt
+	- Secure firmware registration and calling.
+kernel_mode_neon.txt
+	- How to use NEON instructions in kernel mode
+kernel_user_helpers.txt
+	- Helper functions in kernel space made available for userspace.
 mem_alignment
 	- alignment abort handler documentation
 memory.txt
@ -34,3 +44,7 @@ nwfpe/
 	- NWFPE floating point emulator documentation
 swp_emulation
 	- SWP/SWPB emulation handler/logging description
+tcm.txt
+	- ARM Tightly Coupled Memory
+vlocks.txt
+	- Voting locks, low-level mechanism relying on memory system atomic writes.
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@ -1,8 +1,10 @@
 00-INDEX
 	- This file
-
+Makefile
+	- Makefile for gptimers example file.
 bfin-gpio-notes.txt
 	- Notes in developing/using bfin-gpio driver.
-
 bfin-spi-notes.txt
 	- Notes for using bfin spi bus driver.
+gptimers-example.c
+	- gptimers example
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@ -14,6 +14,8 @@ deadline-iosched.txt
 	- Deadline IO scheduler tunables
 ioprio.txt
 	- Block io priorities (in CFQ scheduler)
+null_blk.txt
+	- Null block for block-layer benchmarking.
 queue-sysfs.txt
 	- Queue's sysfs entries
 request.txt
--- a/Documentation/devicetree/00-INDEX
+++ b/Documentation/devicetree/00-INDEX
@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
 	- this file
 booting-without-of.txt
 	- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+	- How Linux uses DT and what DT aims to solve.
--- a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+	region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+	compatible = "lsi,zevio-intc";
+	interrupt-controller;
+	reg = <0xDC000000 0x1000>;
+	#interrupt-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@ -13,6 +13,9 @@ Required properties:
 - #address-cells: should be one. The cell is the slot id.
 - #size-cells: should be zero.
 - at least one slot node
+- clock-names: tuple listing input clock names.
+	Required elements: "mci_clk"
+- clocks: phandles to input clocks.

 The node contains child nodes for each slot that the platform uses

@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
 	interrupts = <12 4>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clock-names = "mci_clk";
+	clocks = <&mci0_clk>;

 	[ child node definitions...]
 };
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
@ -1,7 +1,8 @@
 * Allwinner EMAC ethernet controller

 Required properties:
- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+              "allwinner,sun4i-emac")
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: A phandle to a phy node defining the PHY address (as the reg
@ -14,7 +15,7 @@ Optional properties:
 Example:

 emac: ethernet@01c0b000 {
-       compatible = "allwinner,sun4i-emac";
+       compatible = "allwinner,sun4i-a10-emac";
       reg = <0x01c0b000 0x1000>;
       interrupts = <55>;
       clocks = <&ahb_gates 17>;
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
@ -1,7 +1,8 @@
 * Allwinner A10 MDIO Ethernet Controller interface

 Required properties:
- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+              (Deprecated: "allwinner,sun4i-mdio").
 - reg: address and length of the register set for the device.

 Optional properties:
@ -9,7 +10,7 @@ Optional properties:

 Example at the SoC level:
 mdio@01c0b080 {
-	compatible = "allwinner,sun4i-mdio";
+	compatible = "allwinner,sun4i-a10-mdio";
 	reg = <0x01c0b080 0x14>;
 	#address-cells = <1>;
 	#size-cells = <0>;
--- a/Documentation/devicetree/bindings/power/bq2415x.txt
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg:			   integer, i2c address of the device.
+- ti,current-limit:	   integer, initial maximum current charger can pull
+			   from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+			   The chip will use slow precharge if battery voltage
+			   is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current:	   integer, maximum charging current in mA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+			    (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+	compatible = "ti,bq24150a";
+	reg = <0x6b>;
+
+	ti,current-limit = <100>;
+	ti,weak-battery-voltage = <3400>;
+	ti,battery-regulation-voltage = <4200>;
+	ti,charge-current = <650>;
+	ti,termination-current = <100>;
+	ti,resistor-sense = <68>;
+
+	ti,usb-charger-detection = <&isp1704>;
+};
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@ -5,6 +5,9 @@ Required properties:
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
 - cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+	Required elements: "spi_clk"
+- clocks: phandles to input clocks.

 Example:

@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
 	interrupts = <13 4 5>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&spi1_clk>;
+	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
 	status = "okay";

--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@ -8,6 +8,7 @@ ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 ak	Asahi Kasei Corp.
+allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amstaos	AMS-Taos Inc.
@ -40,6 +41,7 @@ gmt	Global Mixed-mode Technology, Inc.
 gumstix	Gumstix, Inc.
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+honeywell	Honeywell
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@ -55,6 +57,7 @@ maxim	Maxim Integrated Products
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.
 national	National Semiconductor
+neonode		Neonode Inc.
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
@ -64,7 +67,7 @@ phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
-qcom	Qualcomm, Inc.
+qcom	Qualcomm Technologies, Inc
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
@ -78,6 +81,7 @@ silabs	Silicon Laboratories
 simtek
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
+spansion	Spansion Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
--- a/Documentation/dvb/contributors.txt
+++ b/Documentation/dvb/contributors.txt
@ -78,7 +78,7 @@ Peter Beutner <p.beutner@gmx.net>
 Wilson Michaels <wilsonmichaels@earthlink.net>
  for the lgdt330x frontend driver, and various bugfixes

-Michael Krufky <mkrufky@m1k.net>
+Michael Krufky <mkrufky@linuxtv.org>
  for maintaining v4l/dvb inter-tree dependencies

 Taylor Jacob <rtjacob@earthlink.net>
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@ -5,6 +5,8 @@ please mail me.

 00-INDEX
 	- this file.
+api.txt
+	- The frame buffer API between applications and buffer devices.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
@ -51,12 +53,16 @@ sh7760fb.txt
 	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
+sm501.txt
+	- info on the framebuffer device driver for sm501 videoframebuffer.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
 	- info on the TGA (DECChip 21030) frame buffer driver.
 tridentfb.txt
 	info on the framebuffer driver for some Trident chip based cards.
+udlfb.txt
+	- Driver for DisplayLink USB 2.0 chips.
 uvesafb.txt
 	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@ -2,6 +2,8 @@
 	- this file (info on some of the filesystems supported by linux).
 Locking
 	- info on locking rules as they pertain to Linux VFS.
+Makefile
+	- Makefile for building the filsystems-part of DocBook.
 9p.txt
 	- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
 adfs.txt
--- a/Documentation/filesystems/nfs/00-INDEX
+++ b/Documentation/filesystems/nfs/00-INDEX
@ -12,6 +12,8 @@ nfs41-server.txt
 	- info on the Linux server implementation of NFSv4 minor version 1.
 nfs-rdma.txt
 	- how to install and setup the Linux NFS/RDMA client and server software
+nfsd-admin-interfaces.txt
+	- Administrative interfaces for nfsd.
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
 pnfs.txt
@ -20,5 +22,5 @@ rpc-cache.txt
 	- introduction to the caching mechanisms in the sunrpc layer.
 idmapper.txt
 	- information for configuring request-keys to be used by idmapper
-knfsd-rpcgss.txt
+rpc-server-gss.txt
 	- Information on GSS authentication support in the NFS Server
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
 several ways to achieve this, depending on the context and requirements.


-Method 1: Declare the I2C devices by bus number
-----------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------

 This method is appropriate when the I2C bus is a system bus as is the case
 for many embedded systems. On such systems, each I2C bus has a number
@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus
 they sit on goes away (if ever.)


+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+	i2c1: i2c@400a0000 {
+		/* ... master properties skipped ... */
+		clock-frequency = <100000>;
+
+		flash@50 {
+			compatible = "atmel,24c256";
+			reg = <0x50>;
+		};
+
+		pca9532: gpio@60 {
+			compatible = "nxp,pca9532";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x60>;
+		};
+	};
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
 Method 2: Instantiate the devices explicitly
 --------------------------------------------

--- a/Documentation/ide/00-INDEX
+++ b/Documentation/ide/00-INDEX
@ -10,3 +10,5 @@ ide-tape.txt
 	- info on the IDE ATAPI streaming tape driver
 ide.txt
 	- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
+warm-plug-howto.txt
+	- using sysfs to remove and add IDE devices.
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@ -1726,16 +1726,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			option description.

 	memmap=nn[KMG]@ss[KMG]
-			[KNL] Force usage of a specific region of memory
-			Region of memory to be used, from ss to ss+nn.
+			[KNL] Force usage of a specific region of memory.
+			Region of memory to be used is from ss to ss+nn.

 	memmap=nn[KMG]#ss[KMG]
 			[KNL,ACPI] Mark specific memory as ACPI data.
-			Region of memory to be used, from ss to ss+nn.
+			Region of memory to be marked is from ss to ss+nn.

 	memmap=nn[KMG]$ss[KMG]
 			[KNL,ACPI] Mark specific memory as reserved.
-			Region of memory to be used, from ss to ss+nn.
+			Region of memory to be reserved is from ss to ss+nn.
 			Example: Exclude memory from 0x18690000-0x1869ffff
 			         memmap=64K$0x18690000
 			         or
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@ -1,13 +1,15 @@
 00-INDEX
 	- This file
-acer-wmi.txt
-	- information on the Acer Laptop WMI Extras driver.
+Makefile
+	- Makefile for building dslm example program.
 asus-laptop.txt
 	- information on the Asus Laptop Extras driver.
 disk-shock-protection.txt
 	- information on hard disk shock protection.
 dslm.c
 	- Simple Disk Sleep Monitor program
+hpfall.c
+	- (HP) laptop accelerometer program for disk protection.
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@ -1,3 +1,7 @@
+00-INDEX
+	- This file
+leds-blinkm.txt
+	- Driver for BlinkM LED-devices.
 leds-class.txt
 	- documents LED handling under Linux.
 leds-lp3944.txt
@ -12,3 +16,7 @@ leds-lp55xx.txt
 	- description about lp55xx common driver.
 leds-lm3556.txt
 	- notes on how to use the leds-lm3556 driver.
+ledtrig-oneshot.txt
+	- One-shot LED trigger for both sporadic and dense events.
+ledtrig-transient.txt
+	- LED Transient Trigger, one shot timer activation.
--- a/Documentation/m68k/00-INDEX
+++ b/Documentation/m68k/00-INDEX
@ -1,5 +1,7 @@
 00-INDEX
 	- this file
+README.buddha
+	- Amiga Buddha and Catweasel IDE Driver
 kernel-options.txt
 	- command line options for Linux/m68k

--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@ -6,8 +6,14 @@
 	- information on the 3Com Etherlink III Series Ethernet cards.
 6pack.txt
 	- info on the 6pack protocol, an alternative to KISS for AX.25
-DLINK.txt
-	- info on the D-Link DE-600/DE-620 parallel port pocket adapters
+LICENSE.qla3xxx
+	- GPLv2 for QLogic Linux Networking HBA Driver
+LICENSE.qlge
+	- GPLv2 for QLogic Linux qlge NIC Driver
+LICENSE.qlcnic
+	- GPLv2 for QLogic Linux qlcnic NIC Driver
+Makefile
+	- Makefile for docsrc.
 PLIP.txt
 	- PLIP: The Parallel Line Internet Protocol device driver
 README.ipw2100
@ -17,7 +23,7 @@ README.ipw2200
 README.sb1000
 	- info on General Instrument/NextLevel SURFboard1000 cable modem.
 alias.txt
-	- info on using alias network devices 
+	- info on using alias network devices.
 arcnet-hardware.txt
 	- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
 arcnet.txt
@ -80,7 +86,7 @@ framerelay.txt
 	- info on using Frame Relay/Data Link Connection Identifier (DLCI).
 gen_stats.txt
 	- Generic networking statistics for netlink users.
-generic_hdlc.txt
+generic-hdlc.txt
 	- The generic High Level Data Link Control (HDLC) layer.
 generic_netlink.txt
 	- info on Generic Netlink
@ -88,6 +94,8 @@ gianfar.txt
 	- Gianfar Ethernet Driver.
 i40e.txt
 	- README for the Intel Ethernet Controller XL710 Driver (i40e).
+i40evf.txt
+	- Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
 ieee802154.txt
 	- Linux IEEE 802.15.4 implementation, API and drivers
 igb.txt
@ -102,6 +110,8 @@ ipddp.txt
 	- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
 iphase.txt
 	- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipsec.txt
+	- Note on not compressing IPSec payload and resulting failed policy check.
 ipv6.txt
 	- Options to the ipv6 kernel module.
 ipvs-sysctl.txt
@ -120,6 +130,8 @@ lapb-module.txt
 	- programming information of the LAPB module.
 ltpc.txt
 	- the Apple or Farallon LocalTalk PC card driver
+mac80211-auth-assoc-deauth.txt
+	- authentication and association / deauth-disassoc with max80211
 mac80211-injection.txt
 	- HOWTO use packet injection with mac80211
 multiqueue.txt
@ -134,6 +146,10 @@ netdevices.txt
 	- info on network device driver functions exported to the kernel.
 netif-msg.txt
 	- Design of the network interface message level setting (NETIF_MSG_*).
+netlink_mmap.txt
+	- memory mapped I/O with netlink
+nf_conntrack-sysctl.txt
+	- list of netfilter-sysctl knobs.
 nfc.txt
 	- The Linux Near Field Communication (NFS) subsystem.
 openvswitch.txt
@ -176,7 +192,7 @@ skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
 	- the driver for SMC's 9000 series of Ethernet cards
-spider-net.txt
+spider_net.txt
 	- README for the Spidernet Driver (as found in PS3 / Cell BE).
 stmmac.txt
 	- README for the STMicro Synopsys Ethernet driver.
@ -188,6 +204,8 @@ tcp.txt
 	- short blurb on how TCP output takes place.
 tcp-thin.txt
 	- kernel tuning options for low rate 'thin' TCP streams.
+team.txt
+	- pointer to information for ethernet teaming devices.
 tlan.txt
 	- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
 tproxy.txt
@ -200,6 +218,8 @@ vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
 vxge.txt
 	- README for the Neterion X3100 PCIe Server Adapter.
+vxlan.txt
+	- Virtual extensible LAN overview
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
 it. This framework provides the following APIs to get a reference to the PHY.

 struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);

-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY.  The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.

 5. Releasing a reference to the PHY

--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@ -4,6 +4,8 @@ apm-acpi.txt
 	- basic info about the APM and ACPI support.
 basic-pm-debugging.txt
 	- Debugging suspend and resume
+charger-manager.txt
+	- Battery charger management.
 devices.txt
 	- How drivers interact with system-wide power management
 drivers-testing.txt
@ -22,6 +24,8 @@ pm_qos_interface.txt
 	- info on Linux PM Quality of Service interface
 power_supply_class.txt
 	- Tells userspace about battery, UPS, AC or DC power supply properties
+runtime_pm.txt
+	- Power management framework for I/O devices.
 s2ram.txt
 	- How to get suspend to ram working (and debug it when it isn't)
 states.txt
@ -38,7 +42,5 @@ tricks.txt
 	- How to trick software suspend (to disk) into working when it isn't
 userland-swsusp.txt
 	- Experimental implementation of software suspend in userspace
-video_extension.txt
-	- ACPI video extensions
 video.txt
 	- Video issues during resume from suspend
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@ -117,6 +117,7 @@ static void usage(char *progname)
 		" -f val     adjust the ptp clock frequency by 'val' ppb\n"
 		" -g         get the ptp clock time\n"
 		" -h         prints this message\n"
+		" -i val     index for event/trigger\n"
 		" -k val     measure the time offset between system and phc clock\n"
 		"            for 'val' times (Maximum 25)\n"
 		" -p val     enable output with a period of 'val' nanoseconds\n"
@ -154,6 +155,7 @@ int main(int argc, char *argv[])
 	int capabilities = 0;
 	int extts = 0;
 	int gettime = 0;
+	int index = 0;
 	int oneshot = 0;
 	int pct_offset = 0;
 	int n_samples = 0;
@ -167,7 +169,7 @@ int main(int argc, char *argv[])

 	progname = strrchr(argv[0], '/');
 	progname = progname ? 1+progname : argv[0];
-	while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
+	while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
 		switch (c) {
 		case 'a':
 			oneshot = atoi(optarg);
@ -190,6 +192,9 @@ int main(int argc, char *argv[])
 		case 'g':
 			gettime = 1;
 			break;
+		case 'i':
+			index = atoi(optarg);
+			break;
 		case 'k':
 			pct_offset = 1;
 			n_samples = atoi(optarg);
@ -301,7 +306,7 @@ int main(int argc, char *argv[])

 	if (extts) {
 		memset(&extts_request, 0, sizeof(extts_request));
-		extts_request.index = 0;
+		extts_request.index = index;
 		extts_request.flags = PTP_ENABLE_FEATURE;
 		if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
 			perror("PTP_EXTTS_REQUEST");
@ -375,7 +380,7 @@ int main(int argc, char *argv[])
 			return -1;
 		}
 		memset(&perout_request, 0, sizeof(perout_request));
-		perout_request.index = 0;
+		perout_request.index = index;
 		perout_request.start.sec = ts.tv_sec + 2;
 		perout_request.start.nsec = 0;
 		perout_request.period.sec = 0;
--- a/Documentation/s390/00-INDEX
+++ b/Documentation/s390/00-INDEX
@ -16,11 +16,13 @@ Debugging390.txt
 	- hints for debugging on s390 systems.
 driver-model.txt
 	- information on s390 devices and the driver model.
+kvm.txt
+	- ioctl calls to /dev/kvm on s390.
 monreader.txt
 	- information on accessing the z/VM monitor stream from Linux.
+qeth.txt
+	- HiperSockets Bridge Port Support.
 s390dbf.txt
 	- information on using the s390 debug feature.
-TAPE
-	- information on the driver for channel-attached tapes.
-zfcpdump
+zfcpdump.txt
 	- information on the s390 SCSI dump tool.
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@ -2,6 +2,8 @@
 	- this file.
 sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
+sched-bwc.txt
+	- CFS bandwidth control overview.
 sched-design-CFS.txt
 	- goals, design and implementation of the Completely Fair Scheduler.
 sched-domains.txt
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@ -36,6 +36,8 @@ NinjaSCSI.txt
 	- info on WorkBiT NinjaSCSI-32/32Bi driver
 aacraid.txt
 	- Driver supporting Adaptec RAID controllers
+advansys.txt
+	- List of Advansys Host Adapters
 aha152x.txt
 	- info on driver for Adaptec AHA152x based adapters
 aic79xx.txt
@ -44,6 +46,12 @@ aic7xxx.txt
 	- info on driver for Adaptec controllers
 arcmsr_spec.txt
 	- ARECA FIRMWARE SPEC (for IOP331 adapter)
+bfa.txt
+	- Brocade FC/FCOE adapter driver.
+bnx2fc.txt
+	- FCoE hardware offload for Broadcom network interfaces.
+cxgb3i.txt
+	- Chelsio iSCSI Linux Driver
 dc395x.txt
 	- README file for the dc395x SCSI driver
 dpti.txt
@ -52,18 +60,24 @@ dtc3x80.txt
 	- info on driver for DTC 2x80 based adapters
 g_NCR5380.txt
 	- info on driver for NCR5380 and NCR53c400 based adapters
+hpsa.txt
+	- HP Smart Array Controller SCSI driver.
 hptiop.txt
 	- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
 in2000.txt
 	- info on in2000 driver
 libsas.txt
 	- Serial Attached SCSI management layer.
+link_power_management_policy.txt
+	- Link power management options.
 lpfc.txt
 	- LPFC driver release notes
 megaraid.txt
 	- Common Management Module, shared code handling ioctls for LSI drivers
 ncr53c8xx.txt
 	- info on driver for NCR53c8xx based adapters
+osd.txt
+	Object-Based Storage Device, command set introduction.
 osst.txt
 	- info on driver for OnStream SC-x0 SCSI tape
 ppa.txt
@ -74,6 +88,8 @@ scsi-changer.txt
 	- README for the SCSI media changer driver
 scsi-generic.txt
 	- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi-parameters.txt
+	- List of SCSI-parameters to pass to the kernel at module load-time.
 scsi.txt
 	- short blurb on using SCSI support as a module.
 scsi_mid_low_api.txt
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@ -4,10 +4,12 @@ README.cycladesZ
 	- info on Cyclades-Z firmware loading.
 digiepca.txt
 	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
-hayes-esp.txt
-	- info on using the Hayes ESP serial driver.
+driver
+	- intro to the low level serial driver.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
+n_gsm.txt
+	- GSM 0710 tty multiplexer howto.
 riscom8.txt
 	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt
--- a/Documentation/spi/00-INDEX
+++ b/Documentation/spi/00-INDEX
@ -0,0 +1,22 @@
+00-INDEX
+	- this file.
+Makefile
+	- Makefile for the example sourcefiles.
+butterfly
+	- AVR Butterfly SPI driver overview and pin configuration.
+ep93xx_spi
+	- Basic EP93xx SPI driver configuration.
+pxa2xx
+	- PXA2xx SPI master controller build by spi_message fifo wq
+spidev
+	- Intro to the userspace API for spi devices
+spidev_fdx.c
+	- spidev example file
+spi-lm70llp
+	- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
+spi-sc18is602
+	- NXP SC18IS602/603 I2C-bus to SPI bridge
+spi-summary
+	- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
+spidev_test.c
+	- SPI testing utility.
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@ -543,7 +543,22 @@ SPI MASTER METHODS
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this message, it must call
 	spi_finalize_current_message() so the subsystem can issue the next
-	transfer. This may sleep.
+	message. This may sleep.
+
+    master->transfer_one(struct spi_master *master, struct spi_device *spi,
+			 struct spi_transfer *transfer)
+	The subsystem calls the driver to transfer a single transfer while
+	queuing transfers that arrive in the meantime. When the driver is
+	finished with this transfer, it must call
+	spi_finalize_current_transfer() so the subsystem can issue the next
+	transfer. This may sleep. Note: transfer_one and transfer_one_message
+	are mutually exclusive; when both are set, the generic subsystem does
+	not call your transfer_one callback.
+
+	Return values:
+	negative errno: error
+	0: transfer is finished
+	1: transfer is still in progress

    DEPRECATED METHODS

--- a/Documentation/timers/00-INDEX
+++ b/Documentation/timers/00-INDEX
@ -8,6 +8,8 @@ hpet_example.c
 	- sample hpet timer test program
 hrtimers.txt
 	- subsystem for high-resolution kernel timers
+Makefile
+	- Build and link hpet_example
 NO_HZ.txt
 	- Summary of the different methods for the scheduler clock-interrupts management.
 timers-howto.txt
--- a/Documentation/virtual/kvm/00-INDEX
+++ b/Documentation/virtual/kvm/00-INDEX
@ -20,5 +20,7 @@ ppc-pv.txt
 	- the paravirtualization interface on PowerPC.
 review-checklist.txt
 	- review checklist for KVM patches.
+s390-diag.txt
+	- Diagnose hypercall description (for IBM S/390)
 timekeeping.txt
 	- timekeeping virtualization for x86-based architectures.
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@ -16,8 +16,6 @@ hwpoison.txt
 	- explains what hwpoison is
 ksm.txt
 	- how to use the Kernel Samepage Merging feature.
-locking
-	- info on how locking and synchronization is done in the Linux vm code.
 numa
 	- information about NUMA specific code in the Linux vm.
 numa_memory_policy.txt
@ -32,6 +30,8 @@ slub.txt
 	- a short users guide for SLUB.
 soft-dirty.txt
 	- short explanation for soft-dirty PTEs
+split_page_table_lock
+	- Separate per-table lock to improve scalability of the old page_table_lock.
 transhuge.txt
 	- Transparent Hugepage Support, alternative way of using hugepages.
 unevictable-lru.txt
--- a/Documentation/w1/masters/00-INDEX
+++ b/Documentation/w1/masters/00-INDEX
@ -4,7 +4,9 @@ ds2482
 	- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
 ds2490
 	- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc_w1
+mxc-w1
 	- W1 master controller driver found on Freescale MX2/MX3 SoCs
+omap-hdq
+	- HDQ/1-wire module of TI OMAP 2430/3430.
 w1-gpio
 	- GPIO 1-wire bus master driver.
--- a/Documentation/w1/slaves/00-INDEX
+++ b/Documentation/w1/slaves/00-INDEX
@ -4,3 +4,5 @@ w1_therm
 	- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
 w1_ds2423
 	- The Maxim/Dallas Semiconductor ds2423 counter device.
+w1_ds28e04
+	- The Maxim/Dallas Semiconductor ds28e04 eeprom.
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@ -1,6 +1,20 @@
 00-INDEX
 	- this file
-mtrr.txt
-	- how to use x86 Memory Type Range Registers to increase performance
+boot.txt
+	- List of boot protocol versions
+early-microcode.txt
+	- How to load microcode from an initrd-CPIO archive early to fix CPU issues.
+earlyprintk.txt
+	- Using earlyprintk with a USB2 debug port key.
+entry_64.txt
+	- Describe (some of the) kernel entry points for x86.
 exception-tables.txt
 	- why and how Linux kernel uses exception tables on x86
+mtrr.txt
+	- how to use x86 Memory Type Range Registers to increase performance
+pat.txt
+	- Page Attribute Table intro and API
+usb-legacy-support.txt
+	- how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
+zero-page.txt
+	- layout of the first page of memory.
--- a/Documentation/zh_CN/arm64/booting.txt
+++ b/Documentation/zh_CN/arm64/booting.txt
@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.

 Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
 Documentation/arm64/booting.txt 的中文翻译

@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译
 译存在问题，请联系中文版维护者。

 英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>

 以下为正文
 ---------------------------------------------------------------------
@ -64,8 +64,8 @@ RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何

 必要性: 强制

-设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设备树数据块（dtb）必须 8 字节对齐，并位于从内核映像起始算起第一个 512MB
+内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
 映射此数据块。


@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内

 必要性: 强制

-已解压的内核映像包含一个 32 字节的头，内容如下：
+已解压的内核映像包含一个 64 字节的头，内容如下：

-  u32 magic	= 0x14000008;	/* 跳转到 stext, 小端 */
-  u32 res0	= 0;		/* 保留 */
+  u32 code0;			/* 可执行代码 */
+  u32 code1;			/* 可执行代码 */
  u64 text_offset;		/* 映像装载偏移 */
+  u64 res0	= 0;		/* 保留 */
  u64 res1	= 0;		/* 保留 */
  u64 res2	= 0;		/* 保留 */
+  u64 res3	= 0;		/* 保留 */
+  u64 res4	= 0;		/* 保留 */
+  u32 magic	= 0x644d5241;	/* 魔数, 小端, "ARM\x64" */
+  u32 res5 = 0;      		/* 保留 */
+
+
+映像头注释：
+
+- code0/code1 负责跳转到 stext.

 映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
 的起始地址必须是以 2MB 对齐的。
@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
  外部高速缓存（如果存在）必须配置并禁用。

 - 架构计时器
-  CNTFRQ 必须设定为计时器的频率。
-  如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
-  必须置位。
+  CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
+  都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
+  EL1PCTEN (bit 0) 必须置位。

 - 一致性
  通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
  在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
  在一个更高的异常级别下初始化，以防止在 未知 状态下运行。

+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
 引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：

 - 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
-  数据块必须在每个 CPU 节点中包含以下内容：
-
-    1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
-
-    2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+  数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
+  支持的 enable-method 请见下文。

  引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
  数据块。

- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+  节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+  64 位自然对齐且初始化为零的内存位置。
+
+  这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
  给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
  包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
  发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
-  时，CPU 必须直接跳入此值所指向的地址。
+  时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
+  因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
+  memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
+  域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
+  ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
+  CPU_ON 调用来将 CPU 带入内核。
+
+  *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。
+
+  设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
+  Documentation/devicetree/bindings/arm/psci.txt
+

 - 辅助 CPU 通用寄存器设置
  x0 = 0 (保留，将来可能使用)
--- a/Documentation/zh_CN/arm64/memory.txt
+++ b/Documentation/zh_CN/arm64/memory.txt
@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.

 Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
 Documentation/arm64/memory.txt 的中文翻译

@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译
 译存在问题，请联系中文版维护者。

 英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>

 以下为正文
 ---------------------------------------------------------------------
@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和
 TTBR1 中，且从不写入 TTBR0。


-AArch64 Linux 内存布局：
+AArch64 Linux 在页大小为 4KB 时的内存布局：

 起始地址			结束地址			大小		用途
 -----------------------------------------------------------------------
@ -55,15 +55,42 @@ ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap

 ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[防护页，未来用于 vmmemap]

+ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk 设备
+
 ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O 空间

-ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[防护页]
+ffffffbffbe10000	ffffffbcffffffff	  ~2MB		[防护页]

 ffffffbffc000000	ffffffbfffffffff	  64MB		模块

 ffffffc000000000	ffffffffffffffff	 256GB		内核逻辑内存映射


+AArch64 Linux 在页大小为 64KB 时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		用户空间
+
+fffffc0000000000	fffffdfbfffeffff	  ~2TB		vmalloc
+
+fffffdfbffff0000	fffffdfbffffffff	  64KB		[防护页]
+
+fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
+
+fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[防护页，未来用于 vmmemap]
+
+fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk 设备
+
+fffffdfffbe00000	fffffdfffbe0ffff	  64KB		PCI I/O 空间
+
+fffffdfffbe10000	fffffdfffbffffff	  ~2MB		[防护页]
+
+fffffdfffc000000	fffffdffffffffff	  64MB		模块
+
+fffffe0000000000	ffffffffffffffff	   2TB		内核逻辑内存映射
+
+
 4KB 页大小的转换表查找：

 +--------+--------+--------+--------+--------+--------+--------+--------+
@ -91,3 +118,10 @@ ffffffc000000000	ffffffffffffffff	 256GB		内核逻辑内存映射
 |                 |    +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
 |                 +-------------------------------> [47:42] L1 索引 (未使用)
 +-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的内核对象
--- a/Documentation/zh_CN/arm64/tagged-pointers.txt
+++ b/Documentation/zh_CN/arm64/tagged-pointers.txt
@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+		Linux 在 AArch64 中带标记的虚拟地址
+		=================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
+映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用，其注意事项如下：
+
+	(1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+	    这意味着任何携带用户空间虚拟地址的系统调用（syscall）
+	    参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+	(2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+	    标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+	    地址所携带的包含其内部域信息的标记。此规则的一个例外是
+	    当信号是在调试观察点的异常处理程序中产生的，此时标记的
+	    信息将被保存。
+
+	(3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
+	    的高字节，C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
+将被设置成一个为 “55” 的扩展符。
--- a/6
+++ b/6
@ -2367,7 +2367,7 @@ F:	include/linux/cpufreq.h

 CPU FREQUENCY DRIVERS - ARM BIG LITTLE
 M:	Viresh Kumar <viresh.kumar@linaro.org>
-M:	Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	cpufreq@vger.kernel.org
 L:	linux-pm@vger.kernel.org
 W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
@ -2857,7 +2857,7 @@ M:	Jani Nikula <jani.nikula@linux.intel.com>
 L:	intel-gfx@lists.freedesktop.org
 L:	dri-devel@lists.freedesktop.org
 Q:	http://patchwork.freedesktop.org/project/intel-gfx/
-T:	git git://people.freedesktop.org/~danvet/drm-intel
+T:	git git://anongit.freedesktop.org/drm-intel
 S:	Supported
 F:	drivers/gpu/drm/i915/
 F:	include/drm/i915*
@ -7196,7 +7196,7 @@ S:	Maintained
 F:	drivers/net/ethernet/rdc/r6040.c

 RDS - RELIABLE DATAGRAM SOCKETS
-M:	Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
+M:	Chien Yen <chien.yen@oracle.com>
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Shuffling Zombie Juror

 # *DOCUMENTATION*
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
 # sama5d3
+dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d3_xplained.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@ -0,0 +1,229 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@ -523,7 +523,7 @@
 			};

 			i2c0: i2c@fff88000 {
-				compatible = "atmel,at91sam9263-i2c";
+				compatible = "atmel,at91sam9260-i2c";
 				reg = <0xfff88000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@ -124,6 +124,10 @@
 			nand-on-flash-bbt;
 			status = "okay";
 		};
+
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
 	};

 	leds {
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@ -1228,7 +1228,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
 				 <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@ -188,7 +188,6 @@
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
 		};

 		msp3: msp@80125000 {
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@ -315,7 +315,7 @@
 		ranges;

 		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-emac";
+			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
 			clocks = <&ahb_gates 17>;
@ -323,7 +323,7 @@
 		};

 		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-mdio";
+			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
 			#address-cells = <1>;
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@ -278,7 +278,7 @@
 		ranges;

 		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-emac";
+			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
 			clocks = <&ahb_gates 17>;
@ -286,7 +286,7 @@
 		};

 		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-mdio";
+			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
 			#address-cells = <1>;
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@ -340,7 +340,7 @@
 		ranges;

 		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-emac";
+			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <0 55 4>;
 			clocks = <&ahb_gates 17>;
@ -348,7 +348,7 @@
 		};

 		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-mdio";
+			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
 			#address-cells = <1>;
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
+CONFIG_SOC_DRA7XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SOCFPGA=y
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@ -8,7 +8,7 @@ config ARCH_HI3xxx
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SINGLE
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
 		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);

+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	/* Audio-related clocks configuration */
 	clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);

+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@ -236,8 +236,6 @@ void __init imx6q_pm_init(void)
 		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
 				   IMX6Q_GPR1_GINT);

-	/* Set initial power mode */
-	imx6q_set_lpm(WAIT_CLOCKED);

 	suspend_set_ops(&imx6q_pm_ops);
 }
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@ -2,7 +2,6 @@ config ARCH_MOXART
 	bool "MOXA ART SoC" if ARCH_MULTI_V4T
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select DMA_OF
 	select USE_OF
 	select CLKSRC_OF
 	select CLKSRC_MMIO
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@ -54,7 +54,7 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@ -30,6 +30,7 @@

 #include <mach/gumstix.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>

 #include "generic.h"
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@ -14,6 +14,8 @@
 #ifndef ASM_ARCH_BALLOON3_H
 #define ASM_ARCH_BALLOON3_H

+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
 enum balloon3_features {
 	BALLOON3_FEATURE_OHCI,
 	BALLOON3_FEATURE_MMC,
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_CORGI_H
 #define __ASM_ARCH_CORGI_H  1

+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */

 /*
 * Corgi (Non Standard) GPIO Definitions
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@ -11,6 +11,8 @@
 #ifndef CSB726_H
 #define CSB726_H

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53
 #define CSB726_GPIO_MMC_DETECT	100
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@ -6,6 +6,7 @@
 * published by the Free Software Foundation.
 */

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */

 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@ -23,6 +23,7 @@
 * IDP hardware.
 */

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */

 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@ -13,6 +13,8 @@
 #ifndef _INCLUDE_PALMLD_H_
 #define _INCLUDE_PALMLD_H_

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/

 /* GPIOs */
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@ -15,6 +15,8 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/

 /* GPIOs */
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@ -16,6 +16,8 @@
 #ifndef _INCLUDE_PALMTC_H_
 #define _INCLUDE_PALMTC_H_

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/

 /* GPIOs */
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@ -16,6 +16,8 @@
 #ifndef _INCLUDE_PALMTX_H_
 #define _INCLUDE_PALMTX_H_

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/

 /* GPIOs */
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@ -23,6 +23,8 @@
 * Definitions of CPU card resources only
 */

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
 #define PCM027_BTDET_IRQ       PCM027_IRQ(0)
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@ -20,6 +20,7 @@
 */

 #include <mach/pcm027.h>
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */

 /*
 * definitions relevant only when the PCM-990
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_POODLE_H
 #define __ASM_ARCH_POODLE_H  1

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /*
 * GPIOs
 */
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@ -15,8 +15,8 @@
 #define __ASM_ARCH_SPITZ_H  1
 #endif

+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
 #include <linux/fb.h>
-#include <linux/gpio.h>

 /* Spitz/Akita GPIOs */

--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@ -13,6 +13,8 @@
 #ifndef _ASM_ARCH_TOSA_H_
 #define _ASM_ARCH_TOSA_H_ 1

+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
 /*  TOSA Chip selects  */
 #define TOSA_LCDC_PHYS		PXA_CS4_PHYS
 /* Internel Scoop */
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@ -10,6 +10,8 @@
 #ifndef _TRIPEPS4_H_
 #define _TRIPEPS4_H_

+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /* physical memory regions */
 #define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
 #define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@ -8,7 +8,7 @@ config ARCH_SHMOBILE_MULTI
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@ -25,6 +25,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/memblock.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>

@ -41,6 +42,18 @@

 void __iomem *zynq_scu_base;

+/**
+ * zynq_memory_init - Initialize special memory
+ *
+ * We need to stop things allocating the low memory as DMA can't work in
+ * the 1st 512K of memory.
+ */
+static void __init zynq_memory_init(void)
+{
+	if (!__pa(PAGE_OFFSET))
+		memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir));
+}
+
 static struct platform_device zynq_cpuidle_device = {
 	.name = "cpuidle-zynq",
 };
@ -117,5 +130,6 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.init_machine	= zynq_init_machine,
 	.init_time	= zynq_timer_init,
 	.dt_compat	= zynq_dt_match,
+	.reserve	= zynq_memory_init,
 	.restart	= zynq_system_reset,
 MACHINE_END
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -36,6 +36,7 @@ config ARM64
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_MEMBLOCK
+	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@ -19,6 +18,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@ -27,6 +27,7 @@ CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
+CONFIG_CMA=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
@ -42,14 +43,17 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV=y
+CONFIG_DMA_CMA=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_I8042 is not set
@ -62,13 +66,19 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
--- a/arch/arm64/include/asm/atomic.h
+++ b/arch/arm64/include/asm/atomic.h
@ -54,8 +54,7 @@ static inline void atomic_add(int i, atomic_t *v)
 "	stxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }

 static inline int atomic_add_return(int i, atomic_t *v)
@ -64,14 +63,15 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	int result;

 	asm volatile("// atomic_add_return\n"
-"1:	ldaxr	%w0, %2\n"
+"1:	ldxr	%w0, %2\n"
 "	add	%w0, %w0, %w3\n"
 "	stlxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");

+	smp_mb();
 	return result;
 }

@ -86,8 +86,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 "	stxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }

 static inline int atomic_sub_return(int i, atomic_t *v)
@ -96,14 +95,15 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	int result;

 	asm volatile("// atomic_sub_return\n"
-"1:	ldaxr	%w0, %2\n"
+"1:	ldxr	%w0, %2\n"
 "	sub	%w0, %w0, %w3\n"
 "	stlxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");

+	smp_mb();
 	return result;
 }

@ -112,17 +112,20 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 	unsigned long tmp;
 	int oldval;

+	smp_mb();
+
 	asm volatile("// atomic_cmpxchg\n"
-"1:	ldaxr	%w1, %2\n"
+"1:	ldxr	%w1, %2\n"
 "	cmp	%w1, %w3\n"
 "	b.ne	2f\n"
-"	stlxr	%w0, %w4, %2\n"
+"	stxr	%w0, %w4, %2\n"
 "	cbnz	%w0, 1b\n"
 "2:"
 	: "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter)
 	: "Ir" (old), "r" (new)
-	: "cc", "memory");
+	: "cc");

+	smp_mb();
 	return oldval;
 }

@ -173,8 +176,7 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 "	stxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }

 static inline long atomic64_add_return(long i, atomic64_t *v)
@ -183,14 +185,15 @@ static inline long atomic64_add_return(long i, atomic64_t *v)
 	unsigned long tmp;

 	asm volatile("// atomic64_add_return\n"
-"1:	ldaxr	%0, %2\n"
+"1:	ldxr	%0, %2\n"
 "	add	%0, %0, %3\n"
 "	stlxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");

+	smp_mb();
 	return result;
 }

@ -205,8 +208,7 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 "	stxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }

 static inline long atomic64_sub_return(long i, atomic64_t *v)
@ -215,14 +217,15 @@ static inline long atomic64_sub_return(long i, atomic64_t *v)
 	unsigned long tmp;

 	asm volatile("// atomic64_sub_return\n"
-"1:	ldaxr	%0, %2\n"
+"1:	ldxr	%0, %2\n"
 "	sub	%0, %0, %3\n"
 "	stlxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");

+	smp_mb();
 	return result;
 }

@ -231,17 +234,20 @@ static inline long atomic64_cmpxchg(atomic64_t *ptr, long old, long new)
 	long oldval;
 	unsigned long res;

+	smp_mb();
+
 	asm volatile("// atomic64_cmpxchg\n"
-"1:	ldaxr	%1, %2\n"
+"1:	ldxr	%1, %2\n"
 "	cmp	%1, %3\n"
 "	b.ne	2f\n"
-"	stlxr	%w0, %4, %2\n"
+"	stxr	%w0, %4, %2\n"
 "	cbnz	%w0, 1b\n"
 "2:"
 	: "=&r" (res), "=&r" (oldval), "+Q" (ptr->counter)
 	: "Ir" (old), "r" (new)
-	: "cc", "memory");
+	: "cc");

+	smp_mb();
 	return oldval;
 }

@ -253,11 +259,12 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;

 	asm volatile("// atomic64_dec_if_positive\n"
-"1:	ldaxr	%0, %2\n"
+"1:	ldxr	%0, %2\n"
 "	subs	%0, %0, #1\n"
 "	b.mi	2f\n"
 "	stlxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b\n"
+"	dmb	ish\n"
 "2:"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	:
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@ -25,7 +25,7 @@
 #define wfi()		asm volatile("wfi" : : : "memory")

 #define isb()		asm volatile("isb" : : : "memory")
-#define dsb()		asm volatile("dsb sy" : : : "memory")
+#define dsb(opt)	asm volatile("dsb sy" : : : "memory")

 #define mb()		dsb()
 #define rmb()		asm volatile("dsb ld" : : : "memory")
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@ -116,6 +116,7 @@ extern void flush_dcache_page(struct page *);
 static inline void __flush_icache_all(void)
 {
 	asm("ic	ialluis");
+	dsb();
 }

 #define flush_dcache_mmap_lock(mapping) \
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@ -29,44 +29,45 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	switch (size) {
 	case 1:
 		asm volatile("//	__xchg1\n"
-		"1:	ldaxrb	%w0, %2\n"
+		"1:	ldxrb	%w0, %2\n"
 		"	stlxrb	%w1, %w3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	case 2:
 		asm volatile("//	__xchg2\n"
-		"1:	ldaxrh	%w0, %2\n"
+		"1:	ldxrh	%w0, %2\n"
 		"	stlxrh	%w1, %w3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	case 4:
 		asm volatile("//	__xchg4\n"
-		"1:	ldaxr	%w0, %2\n"
+		"1:	ldxr	%w0, %2\n"
 		"	stlxr	%w1, %w3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	case 8:
 		asm volatile("//	__xchg8\n"
-		"1:	ldaxr	%0, %2\n"
+		"1:	ldxr	%0, %2\n"
 		"	stlxr	%w1, %3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	default:
 		BUILD_BUG();
 	}

+	smp_mb();
 	return ret;
 }

--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@ -42,7 +42,7 @@
 #define ESR_EL1_EC_SP_ALIGN	(0x26)
 #define ESR_EL1_EC_FP_EXC32	(0x28)
 #define ESR_EL1_EC_FP_EXC64	(0x2C)
-#define ESR_EL1_EC_SERRROR	(0x2F)
+#define ESR_EL1_EC_SERROR	(0x2F)
 #define ESR_EL1_EC_BREAKPT_EL0	(0x30)
 #define ESR_EL1_EC_BREAKPT_EL1	(0x31)
 #define ESR_EL1_EC_SOFTSTP_EL0	(0x32)
--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@ -24,10 +24,11 @@

 #define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg)		\
 	asm volatile(							\
-"1:	ldaxr	%w1, %2\n"						\
+"1:	ldxr	%w1, %2\n"						\
 	insn "\n"							\
 "2:	stlxr	%w3, %w0, %2\n"						\
 "	cbnz	%w3, 1b\n"						\
+"	dmb	ish\n"							\
 "3:\n"									\
 "	.pushsection .fixup,\"ax\"\n"					\
 "	.align	2\n"							\
@ -40,7 +41,7 @@
 "	.popsection\n"							\
 	: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp)	\
 	: "r" (oparg), "Ir" (-EFAULT)					\
-	: "cc", "memory")
+	: "memory")

 static inline int
 futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
@ -111,11 +112,12 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;

 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
-"1:	ldaxr	%w1, %2\n"
+"1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
 "	cbnz	%w3, 3f\n"
 "2:	stlxr	%w3, %w5, %2\n"
 "	cbnz	%w3, 1b\n"
+"	dmb	ish\n"
 "3:\n"
 "	.pushsection .fixup,\"ax\"\n"
 "4:	mov	%w0, %w6\n"
@ -127,7 +129,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "	.popsection\n"
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
-	: "cc", "memory");
+	: "memory");

 	*uval = val;
 	return ret;
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@ -231,7 +231,7 @@
 #define ESR_EL2_EC_SP_ALIGN	(0x26)
 #define ESR_EL2_EC_FP_EXC32	(0x28)
 #define ESR_EL2_EC_FP_EXC64	(0x2C)
-#define ESR_EL2_EC_SERRROR	(0x2F)
+#define ESR_EL2_EC_SERROR	(0x2F)
 #define ESR_EL2_EC_BREAKPT	(0x30)
 #define ESR_EL2_EC_BREAKPT_HYP	(0x31)
 #define ESR_EL2_EC_SOFTSTP	(0x32)
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@ -132,7 +132,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 	"	cbnz	%w0, 2b\n"
 	: "=&r" (tmp), "+Q" (rw->lock)
 	: "r" (0x80000000)
-	: "cc", "memory");
+	: "memory");
 }

 static inline int arch_write_trylock(arch_rwlock_t *rw)
@ -146,7 +146,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
 	"1:\n"
 	: "=&r" (tmp), "+Q" (rw->lock)
 	: "r" (0x80000000)
-	: "cc", "memory");
+	: "memory");

 	return !tmp;
 }
@ -187,7 +187,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 	"	cbnz	%w1, 2b\n"
 	: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
 	:
-	: "cc", "memory");
+	: "memory");
 }

 static inline void arch_read_unlock(arch_rwlock_t *rw)
@ -201,7 +201,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 	"	cbnz	%w1, 1b\n"
 	: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
 	:
-	: "cc", "memory");
+	: "memory");
 }

 static inline int arch_read_trylock(arch_rwlock_t *rw)
@ -216,7 +216,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 	"1:\n"
 	: "=&r" (tmp), "+r" (tmp2), "+Q" (rw->lock)
 	:
-	: "cc", "memory");
+	: "memory");

 	return !tmp2;
 }
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@ -399,7 +399,10 @@ __SYSCALL(374, compat_sys_sendmmsg)
 __SYSCALL(375, sys_setns)
 __SYSCALL(376, compat_sys_process_vm_readv)
 __SYSCALL(377, compat_sys_process_vm_writev)
-__SYSCALL(378, sys_ni_syscall)			/* 378 for kcmp */
+__SYSCALL(378, sys_kcmp)
+__SYSCALL(379, sys_finit_module)
+__SYSCALL(380, sys_sched_setattr)
+__SYSCALL(381, sys_sched_getattr)

 #define __NR_compat_syscalls		379

--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@ -148,6 +148,15 @@ struct kvm_arch_memory_slot {
 #define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
 #define KVM_REG_ARM_TIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 0, 2)

+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR	0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS	2
+#define   KVM_DEV_ARM_VGIC_CPUID_SHIFT	32
+#define   KVM_DEV_ARM_VGIC_CPUID_MASK	(0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define   KVM_DEV_ARM_VGIC_OFFSET_SHIFT	0
+#define   KVM_DEV_ARM_VGIC_OFFSET_MASK	(0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+
 /* KVM_IRQ_LINE irq field index values */
 #define KVM_ARM_IRQ_TYPE_SHIFT		24
 #define KVM_ARM_IRQ_TYPE_MASK		0xff
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@ -38,12 +38,13 @@ __kuser_cmpxchg64:			// 0xffff0f60
 	.inst	0xe92d00f0		//	push		{r4, r5, r6, r7}
 	.inst	0xe1c040d0		//	ldrd		r4, r5, [r0]
 	.inst	0xe1c160d0		//	ldrd		r6, r7, [r1]
-	.inst	0xe1b20e9f		// 1:	ldaexd		r0, r1, [r2]
+	.inst	0xe1b20f9f		// 1:	ldrexd		r0, r1, [r2]
 	.inst	0xe0303004		//	eors		r3, r0, r4
 	.inst	0x00313005		//	eoreqs		r3, r1, r5
 	.inst	0x01a23e96		//	stlexdeq	r3, r6, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffff9		//	beq		1b
+	.inst	0xf57ff05b		//	dmb		ish
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
 	.inst	0xe8bd00f0		//	pop		{r4, r5, r6, r7}
 	.inst	0xe12fff1e		//	bx		lr
@ -55,11 +56,12 @@ __kuser_memory_barrier:			// 0xffff0fa0

 	.align	5
 __kuser_cmpxchg:			// 0xffff0fc0
-	.inst	0xe1923e9f		// 1:	ldaex		r3, [r2]
+	.inst	0xe1923f9f		// 1:	ldrex		r3, [r2]
 	.inst	0xe0533000		//	subs		r3, r3, r0
 	.inst	0x01823e91		//	stlexeq		r3, r1, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffffa		//	beq		1b
+	.inst	0xf57ff05b		//	dmb		ish
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
 	.inst	0xe12fff1e		//	bx		lr

--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@ -238,6 +238,8 @@ void update_vsyscall(struct timekeeper *tk)
 	vdso_data->use_syscall			= use_syscall;
 	vdso_data->xtime_coarse_sec		= xtime_coarse.tv_sec;
 	vdso_data->xtime_coarse_nsec		= xtime_coarse.tv_nsec;
+	vdso_data->wtm_clock_sec		= tk->wall_to_monotonic.tv_sec;
+	vdso_data->wtm_clock_nsec		= tk->wall_to_monotonic.tv_nsec;

 	if (!use_syscall) {
 		vdso_data->cs_cycle_last	= tk->clock->cycle_last;
@ -245,8 +247,6 @@ void update_vsyscall(struct timekeeper *tk)
 		vdso_data->xtime_clock_nsec	= tk->xtime_nsec;
 		vdso_data->cs_mult		= tk->mult;
 		vdso_data->cs_shift		= tk->shift;
-		vdso_data->wtm_clock_sec	= tk->wall_to_monotonic.tv_sec;
-		vdso_data->wtm_clock_nsec	= tk->wall_to_monotonic.tv_nsec;
 	}

 	smp_wmb();
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@ -48,7 +48,7 @@ $(obj-vdso): %.o: %.S

 # Actual build commands
 quiet_cmd_vdsold = VDSOL $@
-      cmd_vdsold = $(CC) $(c_flags) -Wl,-T $^ -o $@
+      cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@
 quiet_cmd_vdsoas = VDSOA $@
      cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<

--- a/arch/arm64/kernel/vdso/gettimeofday.S
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@ -103,6 +103,8 @@ ENTRY(__kernel_clock_gettime)
 	bl	__do_get_tspec
 	seqcnt_check w9, 1b

+	mov	x30, x2
+
 	cmp	w0, #CLOCK_MONOTONIC
 	b.ne	6f

@ -118,6 +120,9 @@ ENTRY(__kernel_clock_gettime)
 	ccmp	w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
 	b.ne	8f

+	/* xtime_coarse_nsec is already right-shifted */
+	mov	x12, #0
+
 	/* Get coarse timespec. */
 	adr	vdso_data, _vdso_data
 3:	seqcnt_acquire
@ -156,7 +161,7 @@ ENTRY(__kernel_clock_gettime)
 	lsr	x11, x11, x12
 	stp	x10, x11, [x1, #TSPEC_TV_SEC]
 	mov	x0, xzr
-	ret	x2
+	ret
 7:
 	mov	x30, x2
 8:	/* Syscall fallback. */
--- a/arch/arm64/lib/bitops.S
+++ b/arch/arm64/lib/bitops.S
@ -46,11 +46,12 @@ ENTRY(	\name	)
 	mov	x2, #1
 	add	x1, x1, x0, lsr #3	// Get word offset
 	lsl	x4, x2, x3		// Create mask
-1:	ldaxr	x2, [x1]
+1:	ldxr	x2, [x1]
 	lsr	x0, x2, x3		// Save old value of bit
 	\instr	x2, x2, x4		// toggle bit
 	stlxr	w5, x2, [x1]
 	cbnz	w5, 1b
+	dmb	ish
 	and	x0, x0, #1
 3:	ret
 ENDPROC(\name	)
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@ -45,6 +45,7 @@ static void *arm64_swiotlb_alloc_coherent(struct device *dev, size_t size,
 	if (IS_ENABLED(CONFIG_DMA_CMA)) {
 		struct page *page;

+		size = PAGE_ALIGN(size);
 		page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
 							get_order(size));
 		if (!page)
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@ -203,10 +203,18 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 	do {
 		next = pmd_addr_end(addr, end);
 		/* try section mapping first */
-		if (((addr | next | phys) & ~SECTION_MASK) == 0)
+		if (((addr | next | phys) & ~SECTION_MASK) == 0) {
+			pmd_t old_pmd =*pmd;
 			set_pmd(pmd, __pmd(phys | prot_sect_kernel));
-		else
+			/*
+			 * Check for previous table entries created during
+			 * boot (__create_page_tables) and flush them.
+			 */
+			if (!pmd_none(old_pmd))
+				flush_tlb_all();
+		} else {
 			alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys));
+		}
 		phys += next - addr;
 	} while (pmd++, addr = next, addr != end);
 }
--- a/arch/arm64/mm/pgd.c
+++ b/arch/arm64/mm/pgd.c
@ -32,17 +32,10 @@

 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *new_pgd;
-
 	if (PGD_SIZE == PAGE_SIZE)
-		new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+		return (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	else
-		new_pgd = kzalloc(PGD_SIZE, GFP_KERNEL);
-
-	if (!new_pgd)
-		return NULL;
-
-	return new_pgd;
+		return kzalloc(PGD_SIZE, GFP_KERNEL);
 }

 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
--- a/Показать больше
+++ b/Показать больше