Merge branch 'viafb-pll' into viafb-next
Conflicts: drivers/video/via/viamode.c Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
This commit is contained in:
Florian Tobias Schandinat
Коммит
f33f6f0ccc
|
|
@ -1607,6 +1607,17 @@ config FB_VIA_DIRECT_PROCFS
|
|||
correct output device configuration.
|
||||
Its use is strongly discouraged.
|
||||
|
||||
config FB_VIA_X_COMPATIBILITY
|
||||
bool "X server compatibility"
|
||||
depends on FB_VIA
|
||||
default n
|
||||
help
|
||||
This option reduces the functionality (power saving, ...) of the
|
||||
framebuffer to avoid negative impact on the OpenChrome X server.
|
||||
If you use any X server other than fbdev you should enable this
|
||||
otherwise it should be safe to disable it and allow using all
|
||||
features.
|
||||
|
||||
endif
|
||||
|
||||
config FB_NEOMAGIC
|
||||
|
|
|
|||
|
|
@ -6,4 +6,4 @@ obj-$(CONFIG_FB_VIA) += viafb.o
|
|||
|
||||
viafb-y :=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
|
||||
via_utility.o vt1636.o global.o tblDPASetting.o viamode.o \
|
||||
via-core.o via-gpio.o via_modesetting.o
|
||||
via-core.o via-gpio.o via_modesetting.o via_clock.o
|
||||
|
|
|
|||
|
|
@ -22,273 +22,82 @@
|
|||
#include <linux/via-core.h>
|
||||
#include <asm/olpc.h>
|
||||
#include "global.h"
|
||||
#include "via_clock.h"
|
||||
|
||||
static struct pll_config cle266_pll_config[] = {
|
||||
{19, 4, 0},
|
||||
{26, 5, 0},
|
||||
{28, 5, 0},
|
||||
{31, 5, 0},
|
||||
{33, 5, 0},
|
||||
{55, 5, 0},
|
||||
{102, 5, 0},
|
||||
{53, 6, 0},
|
||||
{92, 6, 0},
|
||||
{98, 6, 0},
|
||||
{112, 6, 0},
|
||||
{41, 7, 0},
|
||||
{60, 7, 0},
|
||||
{99, 7, 0},
|
||||
{100, 7, 0},
|
||||
{83, 8, 0},
|
||||
{86, 8, 0},
|
||||
{108, 8, 0},
|
||||
{87, 9, 0},
|
||||
{118, 9, 0},
|
||||
{95, 12, 0},
|
||||
{115, 12, 0},
|
||||
{108, 13, 0},
|
||||
{83, 17, 0},
|
||||
{67, 20, 0},
|
||||
{86, 20, 0},
|
||||
{98, 20, 0},
|
||||
{121, 24, 0},
|
||||
{99, 29, 0},
|
||||
{33, 3, 1},
|
||||
{15, 4, 1},
|
||||
{23, 4, 1},
|
||||
{37, 5, 1},
|
||||
{83, 5, 1},
|
||||
{85, 5, 1},
|
||||
{94, 5, 1},
|
||||
{103, 5, 1},
|
||||
{109, 5, 1},
|
||||
{113, 5, 1},
|
||||
{121, 5, 1},
|
||||
{82, 6, 1},
|
||||
{31, 7, 1},
|
||||
{55, 7, 1},
|
||||
{84, 7, 1},
|
||||
{83, 8, 1},
|
||||
{76, 9, 1},
|
||||
{127, 9, 1},
|
||||
{33, 4, 2},
|
||||
{75, 4, 2},
|
||||
{119, 4, 2},
|
||||
{121, 4, 2},
|
||||
{91, 5, 2},
|
||||
{118, 5, 2},
|
||||
{83, 6, 2},
|
||||
{109, 6, 2},
|
||||
{90, 7, 2},
|
||||
{93, 2, 3},
|
||||
{53, 3, 3},
|
||||
{73, 4, 3},
|
||||
{89, 4, 3},
|
||||
{105, 4, 3},
|
||||
{117, 4, 3},
|
||||
{101, 5, 3},
|
||||
{121, 5, 3},
|
||||
{127, 5, 3},
|
||||
{99, 7, 3}
|
||||
static struct pll_limit cle266_pll_limits[] = {
|
||||
{19, 19, 4, 0},
|
||||
{26, 102, 5, 0},
|
||||
{53, 112, 6, 0},
|
||||
{41, 100, 7, 0},
|
||||
{83, 108, 8, 0},
|
||||
{87, 118, 9, 0},
|
||||
{95, 115, 12, 0},
|
||||
{108, 108, 13, 0},
|
||||
{83, 83, 17, 0},
|
||||
{67, 98, 20, 0},
|
||||
{121, 121, 24, 0},
|
||||
{99, 99, 29, 0},
|
||||
{33, 33, 3, 1},
|
||||
{15, 23, 4, 1},
|
||||
{37, 121, 5, 1},
|
||||
{82, 82, 6, 1},
|
||||
{31, 84, 7, 1},
|
||||
{83, 83, 8, 1},
|
||||
{76, 127, 9, 1},
|
||||
{33, 121, 4, 2},
|
||||
{91, 118, 5, 2},
|
||||
{83, 109, 6, 2},
|
||||
{90, 90, 7, 2},
|
||||
{93, 93, 2, 3},
|
||||
{53, 53, 3, 3},
|
||||
{73, 117, 4, 3},
|
||||
{101, 127, 5, 3},
|
||||
{99, 99, 7, 3}
|
||||
};
|
||||
|
||||
static struct pll_config k800_pll_config[] = {
|
||||
{22, 2, 0},
|
||||
{28, 3, 0},
|
||||
{81, 3, 1},
|
||||
{85, 3, 1},
|
||||
{98, 3, 1},
|
||||
{112, 3, 1},
|
||||
{86, 4, 1},
|
||||
{166, 4, 1},
|
||||
{109, 5, 1},
|
||||
{113, 5, 1},
|
||||
{121, 5, 1},
|
||||
{131, 5, 1},
|
||||
{143, 5, 1},
|
||||
{153, 5, 1},
|
||||
{66, 3, 2},
|
||||
{68, 3, 2},
|
||||
{95, 3, 2},
|
||||
{106, 3, 2},
|
||||
{116, 3, 2},
|
||||
{93, 4, 2},
|
||||
{119, 4, 2},
|
||||
{121, 4, 2},
|
||||
{133, 4, 2},
|
||||
{137, 4, 2},
|
||||
{117, 5, 2},
|
||||
{118, 5, 2},
|
||||
{120, 5, 2},
|
||||
{124, 5, 2},
|
||||
{132, 5, 2},
|
||||
{137, 5, 2},
|
||||
{141, 5, 2},
|
||||
{166, 5, 2},
|
||||
{170, 5, 2},
|
||||
{191, 5, 2},
|
||||
{206, 5, 2},
|
||||
{208, 5, 2},
|
||||
{30, 2, 3},
|
||||
{69, 3, 3},
|
||||
{82, 3, 3},
|
||||
{83, 3, 3},
|
||||
{109, 3, 3},
|
||||
{114, 3, 3},
|
||||
{125, 3, 3},
|
||||
{89, 4, 3},
|
||||
{103, 4, 3},
|
||||
{117, 4, 3},
|
||||
{126, 4, 3},
|
||||
{150, 4, 3},
|
||||
{161, 4, 3},
|
||||
{121, 5, 3},
|
||||
{127, 5, 3},
|
||||
{131, 5, 3},
|
||||
{134, 5, 3},
|
||||
{148, 5, 3},
|
||||
{169, 5, 3},
|
||||
{172, 5, 3},
|
||||
{182, 5, 3},
|
||||
{195, 5, 3},
|
||||
{196, 5, 3},
|
||||
{208, 5, 3},
|
||||
{66, 2, 4},
|
||||
{85, 3, 4},
|
||||
{141, 4, 4},
|
||||
{146, 4, 4},
|
||||
{161, 4, 4},
|
||||
{177, 5, 4}
|
||||
static struct pll_limit k800_pll_limits[] = {
|
||||
{22, 22, 2, 0},
|
||||
{28, 28, 3, 0},
|
||||
{81, 112, 3, 1},
|
||||
{86, 166, 4, 1},
|
||||
{109, 153, 5, 1},
|
||||
{66, 116, 3, 2},
|
||||
{93, 137, 4, 2},
|
||||
{117, 208, 5, 2},
|
||||
{30, 30, 2, 3},
|
||||
{69, 125, 3, 3},
|
||||
{89, 161, 4, 3},
|
||||
{121, 208, 5, 3},
|
||||
{66, 66, 2, 4},
|
||||
{85, 85, 3, 4},
|
||||
{141, 161, 4, 4},
|
||||
{177, 177, 5, 4}
|
||||
};
|
||||
|
||||
static struct pll_config cx700_pll_config[] = {
|
||||
{98, 3, 1},
|
||||
{86, 4, 1},
|
||||
{109, 5, 1},
|
||||
{110, 5, 1},
|
||||
{113, 5, 1},
|
||||
{121, 5, 1},
|
||||
{131, 5, 1},
|
||||
{135, 5, 1},
|
||||
{142, 5, 1},
|
||||
{143, 5, 1},
|
||||
{153, 5, 1},
|
||||
{187, 5, 1},
|
||||
{208, 5, 1},
|
||||
{68, 2, 2},
|
||||
{95, 3, 2},
|
||||
{116, 3, 2},
|
||||
{93, 4, 2},
|
||||
{119, 4, 2},
|
||||
{133, 4, 2},
|
||||
{137, 4, 2},
|
||||
{151, 4, 2},
|
||||
{166, 4, 2},
|
||||
{110, 5, 2},
|
||||
{112, 5, 2},
|
||||
{117, 5, 2},
|
||||
{118, 5, 2},
|
||||
{120, 5, 2},
|
||||
{132, 5, 2},
|
||||
{137, 5, 2},
|
||||
{141, 5, 2},
|
||||
{151, 5, 2},
|
||||
{166, 5, 2},
|
||||
{175, 5, 2},
|
||||
{191, 5, 2},
|
||||
{206, 5, 2},
|
||||
{174, 7, 2},
|
||||
{82, 3, 3},
|
||||
{109, 3, 3},
|
||||
{117, 4, 3},
|
||||
{150, 4, 3},
|
||||
{161, 4, 3},
|
||||
{112, 5, 3},
|
||||
{115, 5, 3},
|
||||
{121, 5, 3},
|
||||
{127, 5, 3},
|
||||
{129, 5, 3},
|
||||
{131, 5, 3},
|
||||
{134, 5, 3},
|
||||
{138, 5, 3},
|
||||
{148, 5, 3},
|
||||
{157, 5, 3},
|
||||
{169, 5, 3},
|
||||
{172, 5, 3},
|
||||
{190, 5, 3},
|
||||
{195, 5, 3},
|
||||
{196, 5, 3},
|
||||
{208, 5, 3},
|
||||
{141, 5, 4},
|
||||
{150, 5, 4},
|
||||
{166, 5, 4},
|
||||
{176, 5, 4},
|
||||
{177, 5, 4},
|
||||
{183, 5, 4},
|
||||
{202, 5, 4}
|
||||
static struct pll_limit cx700_pll_limits[] = {
|
||||
{98, 98, 3, 1},
|
||||
{86, 86, 4, 1},
|
||||
{109, 208, 5, 1},
|
||||
{68, 68, 2, 2},
|
||||
{95, 116, 3, 2},
|
||||
{93, 166, 4, 2},
|
||||
{110, 206, 5, 2},
|
||||
{174, 174, 7, 2},
|
||||
{82, 109, 3, 3},
|
||||
{117, 161, 4, 3},
|
||||
{112, 208, 5, 3},
|
||||
{141, 202, 5, 4}
|
||||
};
|
||||
|
||||
static struct pll_config vx855_pll_config[] = {
|
||||
{86, 4, 1},
|
||||
{108, 5, 1},
|
||||
{110, 5, 1},
|
||||
{113, 5, 1},
|
||||
{121, 5, 1},
|
||||
{131, 5, 1},
|
||||
{135, 5, 1},
|
||||
{142, 5, 1},
|
||||
{143, 5, 1},
|
||||
{153, 5, 1},
|
||||
{164, 5, 1},
|
||||
{187, 5, 1},
|
||||
{208, 5, 1},
|
||||
{110, 5, 2},
|
||||
{112, 5, 2},
|
||||
{117, 5, 2},
|
||||
{118, 5, 2},
|
||||
{124, 5, 2},
|
||||
{132, 5, 2},
|
||||
{137, 5, 2},
|
||||
{141, 5, 2},
|
||||
{149, 5, 2},
|
||||
{151, 5, 2},
|
||||
{159, 5, 2},
|
||||
{166, 5, 2},
|
||||
{167, 5, 2},
|
||||
{172, 5, 2},
|
||||
{189, 5, 2},
|
||||
{191, 5, 2},
|
||||
{194, 5, 2},
|
||||
{206, 5, 2},
|
||||
{208, 5, 2},
|
||||
{83, 3, 3},
|
||||
{88, 3, 3},
|
||||
{109, 3, 3},
|
||||
{112, 3, 3},
|
||||
{103, 4, 3},
|
||||
{105, 4, 3},
|
||||
{161, 4, 3},
|
||||
{112, 5, 3},
|
||||
{115, 5, 3},
|
||||
{121, 5, 3},
|
||||
{127, 5, 3},
|
||||
{134, 5, 3},
|
||||
{137, 5, 3},
|
||||
{148, 5, 3},
|
||||
{157, 5, 3},
|
||||
{169, 5, 3},
|
||||
{172, 5, 3},
|
||||
{182, 5, 3},
|
||||
{191, 5, 3},
|
||||
{195, 5, 3},
|
||||
{209, 5, 3},
|
||||
{142, 4, 4},
|
||||
{146, 4, 4},
|
||||
{161, 4, 4},
|
||||
{141, 5, 4},
|
||||
{150, 5, 4},
|
||||
{165, 5, 4},
|
||||
{176, 5, 4}
|
||||
static struct pll_limit vx855_pll_limits[] = {
|
||||
{86, 86, 4, 1},
|
||||
{108, 208, 5, 1},
|
||||
{110, 208, 5, 2},
|
||||
{83, 112, 3, 3},
|
||||
{103, 161, 4, 3},
|
||||
{112, 209, 5, 3},
|
||||
{142, 161, 4, 4},
|
||||
{141, 176, 5, 4}
|
||||
};
|
||||
|
||||
/* according to VIA Technologies these values are based on experiment */
|
||||
|
|
@ -713,6 +522,9 @@ static struct via_device_mapping device_mapping[] = {
|
|||
{VIA_LVDS2, "LVDS2"}
|
||||
};
|
||||
|
||||
/* structure with function pointers to support clock control */
|
||||
static struct via_clock clock;
|
||||
|
||||
static void load_fix_bit_crtc_reg(void);
|
||||
static void __devinit init_gfx_chip_info(int chip_type);
|
||||
static void __devinit init_tmds_chip_info(void);
|
||||
|
|
@ -1634,69 +1446,54 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active)
|
|||
|
||||
}
|
||||
|
||||
static u32 cle266_encode_pll(struct pll_config pll)
|
||||
{
|
||||
return (pll.multiplier << 8)
|
||||
| (pll.rshift << 6)
|
||||
| pll.divisor;
|
||||
}
|
||||
|
||||
static u32 k800_encode_pll(struct pll_config pll)
|
||||
{
|
||||
return ((pll.divisor - 2) << 16)
|
||||
| (pll.rshift << 10)
|
||||
| (pll.multiplier - 2);
|
||||
}
|
||||
|
||||
static u32 vx855_encode_pll(struct pll_config pll)
|
||||
{
|
||||
return (pll.divisor << 16)
|
||||
| (pll.rshift << 10)
|
||||
| pll.multiplier;
|
||||
}
|
||||
|
||||
static inline u32 get_pll_internal_frequency(u32 ref_freq,
|
||||
struct pll_config pll)
|
||||
{
|
||||
return ref_freq / pll.divisor * pll.multiplier;
|
||||
}
|
||||
|
||||
static inline u32 get_pll_output_frequency(u32 ref_freq, struct pll_config pll)
|
||||
{
|
||||
return get_pll_internal_frequency(ref_freq, pll)>>pll.rshift;
|
||||
}
|
||||
|
||||
static struct pll_config get_pll_config(struct pll_config *config, int size,
|
||||
static struct via_pll_config get_pll_config(struct pll_limit *limits, int size,
|
||||
int clk)
|
||||
{
|
||||
struct pll_config best = config[0];
|
||||
struct via_pll_config cur, up, down, best = {0, 1, 0};
|
||||
const u32 f0 = 14318180; /* X1 frequency */
|
||||
int i;
|
||||
int i, f;
|
||||
|
||||
for (i = 1; i < size; i++) {
|
||||
if (abs(get_pll_output_frequency(f0, config[i]) - clk)
|
||||
< abs(get_pll_output_frequency(f0, best) - clk))
|
||||
best = config[i];
|
||||
for (i = 0; i < size; i++) {
|
||||
cur.rshift = limits[i].rshift;
|
||||
cur.divisor = limits[i].divisor;
|
||||
cur.multiplier = clk / ((f0 / cur.divisor)>>cur.rshift);
|
||||
f = abs(get_pll_output_frequency(f0, cur) - clk);
|
||||
up = down = cur;
|
||||
up.multiplier++;
|
||||
down.multiplier--;
|
||||
if (abs(get_pll_output_frequency(f0, up) - clk) < f)
|
||||
cur = up;
|
||||
else if (abs(get_pll_output_frequency(f0, down) - clk) < f)
|
||||
cur = down;
|
||||
|
||||
if (cur.multiplier < limits[i].multiplier_min)
|
||||
cur.multiplier = limits[i].multiplier_min;
|
||||
else if (cur.multiplier > limits[i].multiplier_max)
|
||||
cur.multiplier = limits[i].multiplier_max;
|
||||
|
||||
f = abs(get_pll_output_frequency(f0, cur) - clk);
|
||||
if (f < abs(get_pll_output_frequency(f0, best) - clk))
|
||||
best = cur;
|
||||
}
|
||||
|
||||
return best;
|
||||
}
|
||||
|
||||
u32 viafb_get_clk_value(int clk)
|
||||
static struct via_pll_config get_best_pll_config(int clk)
|
||||
{
|
||||
u32 value = 0;
|
||||
struct via_pll_config config;
|
||||
|
||||
switch (viaparinfo->chip_info->gfx_chip_name) {
|
||||
case UNICHROME_CLE266:
|
||||
case UNICHROME_K400:
|
||||
value = cle266_encode_pll(get_pll_config(cle266_pll_config,
|
||||
ARRAY_SIZE(cle266_pll_config), clk));
|
||||
config = get_pll_config(cle266_pll_limits,
|
||||
ARRAY_SIZE(cle266_pll_limits), clk);
|
||||
break;
|
||||
case UNICHROME_K800:
|
||||
case UNICHROME_PM800:
|
||||
case UNICHROME_CN700:
|
||||
value = k800_encode_pll(get_pll_config(k800_pll_config,
|
||||
ARRAY_SIZE(k800_pll_config), clk));
|
||||
config = get_pll_config(k800_pll_limits,
|
||||
ARRAY_SIZE(k800_pll_limits), clk);
|
||||
break;
|
||||
case UNICHROME_CX700:
|
||||
case UNICHROME_CN750:
|
||||
|
|
@ -1704,92 +1501,28 @@ u32 viafb_get_clk_value(int clk)
|
|||
case UNICHROME_P4M890:
|
||||
case UNICHROME_P4M900:
|
||||
case UNICHROME_VX800:
|
||||
value = k800_encode_pll(get_pll_config(cx700_pll_config,
|
||||
ARRAY_SIZE(cx700_pll_config), clk));
|
||||
config = get_pll_config(cx700_pll_limits,
|
||||
ARRAY_SIZE(cx700_pll_limits), clk);
|
||||
break;
|
||||
case UNICHROME_VX855:
|
||||
case UNICHROME_VX900:
|
||||
value = vx855_encode_pll(get_pll_config(vx855_pll_config,
|
||||
ARRAY_SIZE(vx855_pll_config), clk));
|
||||
config = get_pll_config(vx855_pll_limits,
|
||||
ARRAY_SIZE(vx855_pll_limits), clk);
|
||||
break;
|
||||
}
|
||||
|
||||
return value;
|
||||
return config;
|
||||
}
|
||||
|
||||
/* Set VCLK*/
|
||||
void viafb_set_vclock(u32 clk, int set_iga)
|
||||
{
|
||||
/* H.W. Reset : ON */
|
||||
viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
|
||||
struct via_pll_config config = get_best_pll_config(clk);
|
||||
|
||||
if (set_iga == IGA1) {
|
||||
/* Change D,N FOR VCLK */
|
||||
switch (viaparinfo->chip_info->gfx_chip_name) {
|
||||
case UNICHROME_CLE266:
|
||||
case UNICHROME_K400:
|
||||
via_write_reg(VIASR, SR46, (clk & 0x00FF));
|
||||
via_write_reg(VIASR, SR47, (clk & 0xFF00) >> 8);
|
||||
break;
|
||||
|
||||
case UNICHROME_K800:
|
||||
case UNICHROME_PM800:
|
||||
case UNICHROME_CN700:
|
||||
case UNICHROME_CX700:
|
||||
case UNICHROME_CN750:
|
||||
case UNICHROME_K8M890:
|
||||
case UNICHROME_P4M890:
|
||||
case UNICHROME_P4M900:
|
||||
case UNICHROME_VX800:
|
||||
case UNICHROME_VX855:
|
||||
case UNICHROME_VX900:
|
||||
via_write_reg(VIASR, SR44, (clk & 0x0000FF));
|
||||
via_write_reg(VIASR, SR45, (clk & 0x00FF00) >> 8);
|
||||
via_write_reg(VIASR, SR46, (clk & 0xFF0000) >> 16);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (set_iga == IGA2) {
|
||||
/* Change D,N FOR LCK */
|
||||
switch (viaparinfo->chip_info->gfx_chip_name) {
|
||||
case UNICHROME_CLE266:
|
||||
case UNICHROME_K400:
|
||||
via_write_reg(VIASR, SR44, (clk & 0x00FF));
|
||||
via_write_reg(VIASR, SR45, (clk & 0xFF00) >> 8);
|
||||
break;
|
||||
|
||||
case UNICHROME_K800:
|
||||
case UNICHROME_PM800:
|
||||
case UNICHROME_CN700:
|
||||
case UNICHROME_CX700:
|
||||
case UNICHROME_CN750:
|
||||
case UNICHROME_K8M890:
|
||||
case UNICHROME_P4M890:
|
||||
case UNICHROME_P4M900:
|
||||
case UNICHROME_VX800:
|
||||
case UNICHROME_VX855:
|
||||
case UNICHROME_VX900:
|
||||
via_write_reg(VIASR, SR4A, (clk & 0x0000FF));
|
||||
via_write_reg(VIASR, SR4B, (clk & 0x00FF00) >> 8);
|
||||
via_write_reg(VIASR, SR4C, (clk & 0xFF0000) >> 16);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* H.W. Reset : OFF */
|
||||
viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
|
||||
|
||||
/* Reset PLL */
|
||||
if (set_iga == IGA1) {
|
||||
viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
|
||||
viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
|
||||
}
|
||||
|
||||
if (set_iga == IGA2) {
|
||||
viafb_write_reg_mask(SR40, VIASR, 0x04, BIT2);
|
||||
viafb_write_reg_mask(SR40, VIASR, 0x00, BIT2);
|
||||
}
|
||||
if (set_iga == IGA1)
|
||||
clock.set_primary_pll(config);
|
||||
if (set_iga == IGA2)
|
||||
clock.set_secondary_pll(config);
|
||||
|
||||
/* Fire! */
|
||||
via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
|
||||
|
|
@ -2035,7 +1768,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
|
|||
int i;
|
||||
int index = 0;
|
||||
int h_addr, v_addr;
|
||||
u32 pll_D_N, clock, refresh = viafb_refresh;
|
||||
u32 clock, refresh = viafb_refresh;
|
||||
|
||||
if (viafb_SAMM_ON && set_iga == IGA2)
|
||||
refresh = viafb_refresh1;
|
||||
|
|
@ -2089,14 +1822,13 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
|
|||
|
||||
clock = crt_reg.hor_total * crt_reg.ver_total
|
||||
* crt_table[index].refresh_rate;
|
||||
pll_D_N = viafb_get_clk_value(clock);
|
||||
DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N);
|
||||
viafb_set_vclock(pll_D_N, set_iga);
|
||||
viafb_set_vclock(clock, set_iga);
|
||||
|
||||
}
|
||||
|
||||
void __devinit viafb_init_chip_info(int chip_type)
|
||||
{
|
||||
via_clock_init(&clock, chip_type);
|
||||
init_gfx_chip_info(chip_type);
|
||||
init_tmds_chip_info();
|
||||
init_lvds_chip_info();
|
||||
|
|
@ -2584,6 +2316,33 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
|
|||
get_sync(viafbinfo1));
|
||||
}
|
||||
|
||||
clock.set_engine_pll_state(VIA_STATE_ON);
|
||||
clock.set_primary_clock_source(VIA_CLKSRC_X1, true);
|
||||
clock.set_secondary_clock_source(VIA_CLKSRC_X1, true);
|
||||
|
||||
#ifdef CONFIG_FB_VIA_X_COMPATIBILITY
|
||||
clock.set_primary_pll_state(VIA_STATE_ON);
|
||||
clock.set_primary_clock_state(VIA_STATE_ON);
|
||||
clock.set_secondary_pll_state(VIA_STATE_ON);
|
||||
clock.set_secondary_clock_state(VIA_STATE_ON);
|
||||
#else
|
||||
if (viaparinfo->shared->iga1_devices) {
|
||||
clock.set_primary_pll_state(VIA_STATE_ON);
|
||||
clock.set_primary_clock_state(VIA_STATE_ON);
|
||||
} else {
|
||||
clock.set_primary_pll_state(VIA_STATE_OFF);
|
||||
clock.set_primary_clock_state(VIA_STATE_OFF);
|
||||
}
|
||||
|
||||
if (viaparinfo->shared->iga2_devices) {
|
||||
clock.set_secondary_pll_state(VIA_STATE_ON);
|
||||
clock.set_secondary_clock_state(VIA_STATE_ON);
|
||||
} else {
|
||||
clock.set_secondary_pll_state(VIA_STATE_OFF);
|
||||
clock.set_secondary_clock_state(VIA_STATE_OFF);
|
||||
}
|
||||
#endif /*CONFIG_FB_VIA_X_COMPATIBILITY*/
|
||||
|
||||
via_set_state(devices, VIA_STATE_ON);
|
||||
device_screen_on();
|
||||
return 1;
|
||||
|
|
|
|||
|
|
@ -732,20 +732,13 @@ struct _lcd_scaling_factor {
|
|||
struct _lcd_ver_scaling_factor lcd_ver_scaling_factor;
|
||||
};
|
||||
|
||||
struct pll_config {
|
||||
u16 multiplier;
|
||||
struct pll_limit {
|
||||
u16 multiplier_min;
|
||||
u16 multiplier_max;
|
||||
u8 divisor;
|
||||
u8 rshift;
|
||||
};
|
||||
|
||||
struct pll_map {
|
||||
u32 clk;
|
||||
struct pll_config cle266_pll;
|
||||
struct pll_config k800_pll;
|
||||
struct pll_config cx700_pll;
|
||||
struct pll_config vx855_pll;
|
||||
};
|
||||
|
||||
struct rgbLUT {
|
||||
u8 red;
|
||||
u8 green;
|
||||
|
|
@ -935,7 +928,6 @@ void viafb_lock_crt(void);
|
|||
void viafb_unlock_crt(void);
|
||||
void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
|
||||
void viafb_write_regx(struct io_reg RegTable[], int ItemNum);
|
||||
u32 viafb_get_clk_value(int clk);
|
||||
void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
|
||||
void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
|
||||
*p_gfx_dpa_setting);
|
||||
|
|
|
|||
|
|
@ -558,7 +558,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
|
|||
int set_vres = plvds_setting_info->v_active;
|
||||
int panel_hres = plvds_setting_info->lcd_panel_hres;
|
||||
int panel_vres = plvds_setting_info->lcd_panel_vres;
|
||||
u32 pll_D_N, clock;
|
||||
u32 clock;
|
||||
struct display_timing mode_crt_reg, panel_crt_reg;
|
||||
struct crt_mode_table *panel_crt_table = NULL;
|
||||
struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
|
||||
|
|
@ -609,10 +609,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
|
|||
viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
|
||||
|
||||
fill_lcd_format();
|
||||
|
||||
pll_D_N = viafb_get_clk_value(clock);
|
||||
DEBUG_MSG(KERN_INFO "PLL=0x%x", pll_D_N);
|
||||
viafb_set_vclock(pll_D_N, set_iga);
|
||||
viafb_set_vclock(clock, set_iga);
|
||||
lcd_patch_skew(plvds_setting_info, plvds_chip_info);
|
||||
|
||||
/* If K8M800, enable LCD Prefetch Mode. */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,349 @@
|
|||
/*
|
||||
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
|
||||
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
|
||||
* Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public
|
||||
* License as published by the Free Software Foundation;
|
||||
* either version 2, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
|
||||
* the implied warranty of MERCHANTABILITY or FITNESS FOR
|
||||
* A PARTICULAR PURPOSE.See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc.,
|
||||
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
/*
|
||||
* clock and PLL management functions
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/via-core.h>
|
||||
#include "via_clock.h"
|
||||
#include "global.h"
|
||||
#include "debug.h"
|
||||
|
||||
const char *via_slap = "Please slap VIA Technologies to motivate them "
|
||||
"releasing full documentation for your platform!\n";
|
||||
|
||||
static inline u32 cle266_encode_pll(struct via_pll_config pll)
|
||||
{
|
||||
return (pll.multiplier << 8)
|
||||
| (pll.rshift << 6)
|
||||
| pll.divisor;
|
||||
}
|
||||
|
||||
static inline u32 k800_encode_pll(struct via_pll_config pll)
|
||||
{
|
||||
return ((pll.divisor - 2) << 16)
|
||||
| (pll.rshift << 10)
|
||||
| (pll.multiplier - 2);
|
||||
}
|
||||
|
||||
static inline u32 vx855_encode_pll(struct via_pll_config pll)
|
||||
{
|
||||
return (pll.divisor << 16)
|
||||
| (pll.rshift << 10)
|
||||
| pll.multiplier;
|
||||
}
|
||||
|
||||
static inline void cle266_set_primary_pll_encoded(u32 data)
|
||||
{
|
||||
via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
|
||||
via_write_reg(VIASR, 0x46, data & 0xFF);
|
||||
via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF);
|
||||
via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
|
||||
}
|
||||
|
||||
static inline void k800_set_primary_pll_encoded(u32 data)
|
||||
{
|
||||
via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
|
||||
via_write_reg(VIASR, 0x44, data & 0xFF);
|
||||
via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
|
||||
via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF);
|
||||
via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
|
||||
}
|
||||
|
||||
static inline void cle266_set_secondary_pll_encoded(u32 data)
|
||||
{
|
||||
via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
|
||||
via_write_reg(VIASR, 0x44, data & 0xFF);
|
||||
via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
|
||||
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
|
||||
}
|
||||
|
||||
static inline void k800_set_secondary_pll_encoded(u32 data)
|
||||
{
|
||||
via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
|
||||
via_write_reg(VIASR, 0x4A, data & 0xFF);
|
||||
via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF);
|
||||
via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF);
|
||||
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
|
||||
}
|
||||
|
||||
static inline void set_engine_pll_encoded(u32 data)
|
||||
{
|
||||
via_write_reg_mask(VIASR, 0x40, 0x01, 0x01); /* enable reset */
|
||||
via_write_reg(VIASR, 0x47, data & 0xFF);
|
||||
via_write_reg(VIASR, 0x48, (data >> 8) & 0xFF);
|
||||
via_write_reg(VIASR, 0x49, (data >> 16) & 0xFF);
|
||||
via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */
|
||||
}
|
||||
|
||||
static void cle266_set_primary_pll(struct via_pll_config config)
|
||||
{
|
||||
cle266_set_primary_pll_encoded(cle266_encode_pll(config));
|
||||
}
|
||||
|
||||
static void k800_set_primary_pll(struct via_pll_config config)
|
||||
{
|
||||
k800_set_primary_pll_encoded(k800_encode_pll(config));
|
||||
}
|
||||
|
||||
static void vx855_set_primary_pll(struct via_pll_config config)
|
||||
{
|
||||
k800_set_primary_pll_encoded(vx855_encode_pll(config));
|
||||
}
|
||||
|
||||
static void cle266_set_secondary_pll(struct via_pll_config config)
|
||||
{
|
||||
cle266_set_secondary_pll_encoded(cle266_encode_pll(config));
|
||||
}
|
||||
|
||||
static void k800_set_secondary_pll(struct via_pll_config config)
|
||||
{
|
||||
k800_set_secondary_pll_encoded(k800_encode_pll(config));
|
||||
}
|
||||
|
||||
static void vx855_set_secondary_pll(struct via_pll_config config)
|
||||
{
|
||||
k800_set_secondary_pll_encoded(vx855_encode_pll(config));
|
||||
}
|
||||
|
||||
static void k800_set_engine_pll(struct via_pll_config config)
|
||||
{
|
||||
set_engine_pll_encoded(k800_encode_pll(config));
|
||||
}
|
||||
|
||||
static void vx855_set_engine_pll(struct via_pll_config config)
|
||||
{
|
||||
set_engine_pll_encoded(vx855_encode_pll(config));
|
||||
}
|
||||
|
||||
static void set_primary_pll_state(u8 state)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
switch (state) {
|
||||
case VIA_STATE_ON:
|
||||
value = 0x20;
|
||||
break;
|
||||
case VIA_STATE_OFF:
|
||||
value = 0x00;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
via_write_reg_mask(VIASR, 0x2D, value, 0x30);
|
||||
}
|
||||
|
||||
static void set_secondary_pll_state(u8 state)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
switch (state) {
|
||||
case VIA_STATE_ON:
|
||||
value = 0x08;
|
||||
break;
|
||||
case VIA_STATE_OFF:
|
||||
value = 0x00;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
|
||||
}
|
||||
|
||||
static void set_engine_pll_state(u8 state)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
switch (state) {
|
||||
case VIA_STATE_ON:
|
||||
value = 0x02;
|
||||
break;
|
||||
case VIA_STATE_OFF:
|
||||
value = 0x00;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
via_write_reg_mask(VIASR, 0x2D, value, 0x03);
|
||||
}
|
||||
|
||||
static void set_primary_clock_state(u8 state)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
switch (state) {
|
||||
case VIA_STATE_ON:
|
||||
value = 0x20;
|
||||
break;
|
||||
case VIA_STATE_OFF:
|
||||
value = 0x00;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
via_write_reg_mask(VIASR, 0x1B, value, 0x30);
|
||||
}
|
||||
|
||||
static void set_secondary_clock_state(u8 state)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
switch (state) {
|
||||
case VIA_STATE_ON:
|
||||
value = 0x80;
|
||||
break;
|
||||
case VIA_STATE_OFF:
|
||||
value = 0x00;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
via_write_reg_mask(VIASR, 0x1B, value, 0xC0);
|
||||
}
|
||||
|
||||
static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll)
|
||||
{
|
||||
u8 data = 0;
|
||||
|
||||
switch (source) {
|
||||
case VIA_CLKSRC_X1:
|
||||
data = 0x00;
|
||||
break;
|
||||
case VIA_CLKSRC_TVX1:
|
||||
data = 0x02;
|
||||
break;
|
||||
case VIA_CLKSRC_TVPLL:
|
||||
data = 0x04; /* 0x06 should be the same */
|
||||
break;
|
||||
case VIA_CLKSRC_DVP1TVCLKR:
|
||||
data = 0x0A;
|
||||
break;
|
||||
case VIA_CLKSRC_CAP0:
|
||||
data = 0xC;
|
||||
break;
|
||||
case VIA_CLKSRC_CAP1:
|
||||
data = 0x0E;
|
||||
break;
|
||||
}
|
||||
|
||||
if (!use_pll)
|
||||
data |= 1;
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static void set_primary_clock_source(enum via_clksrc source, bool use_pll)
|
||||
{
|
||||
u8 data = set_clock_source_common(source, use_pll) << 4;
|
||||
via_write_reg_mask(VIACR, 0x6C, data, 0xF0);
|
||||
}
|
||||
|
||||
static void set_secondary_clock_source(enum via_clksrc source, bool use_pll)
|
||||
{
|
||||
u8 data = set_clock_source_common(source, use_pll);
|
||||
via_write_reg_mask(VIACR, 0x6C, data, 0x0F);
|
||||
}
|
||||
|
||||
static void dummy_set_clock_state(u8 state)
|
||||
{
|
||||
printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap);
|
||||
}
|
||||
|
||||
static void dummy_set_clock_source(enum via_clksrc source, bool use_pll)
|
||||
{
|
||||
printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap);
|
||||
}
|
||||
|
||||
static void dummy_set_pll_state(u8 state)
|
||||
{
|
||||
printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap);
|
||||
}
|
||||
|
||||
static void dummy_set_pll(struct via_pll_config config)
|
||||
{
|
||||
printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
|
||||
}
|
||||
|
||||
void via_clock_init(struct via_clock *clock, int gfx_chip)
|
||||
{
|
||||
switch (gfx_chip) {
|
||||
case UNICHROME_CLE266:
|
||||
case UNICHROME_K400:
|
||||
clock->set_primary_clock_state = dummy_set_clock_state;
|
||||
clock->set_primary_clock_source = dummy_set_clock_source;
|
||||
clock->set_primary_pll_state = dummy_set_pll_state;
|
||||
clock->set_primary_pll = cle266_set_primary_pll;
|
||||
|
||||
clock->set_secondary_clock_state = dummy_set_clock_state;
|
||||
clock->set_secondary_clock_source = dummy_set_clock_source;
|
||||
clock->set_secondary_pll_state = dummy_set_pll_state;
|
||||
clock->set_secondary_pll = cle266_set_secondary_pll;
|
||||
|
||||
clock->set_engine_pll_state = dummy_set_pll_state;
|
||||
clock->set_engine_pll = dummy_set_pll;
|
||||
break;
|
||||
case UNICHROME_K800:
|
||||
case UNICHROME_PM800:
|
||||
case UNICHROME_CN700:
|
||||
case UNICHROME_CX700:
|
||||
case UNICHROME_CN750:
|
||||
case UNICHROME_K8M890:
|
||||
case UNICHROME_P4M890:
|
||||
case UNICHROME_P4M900:
|
||||
case UNICHROME_VX800:
|
||||
clock->set_primary_clock_state = set_primary_clock_state;
|
||||
clock->set_primary_clock_source = set_primary_clock_source;
|
||||
clock->set_primary_pll_state = set_primary_pll_state;
|
||||
clock->set_primary_pll = k800_set_primary_pll;
|
||||
|
||||
clock->set_secondary_clock_state = set_secondary_clock_state;
|
||||
clock->set_secondary_clock_source = set_secondary_clock_source;
|
||||
clock->set_secondary_pll_state = set_secondary_pll_state;
|
||||
clock->set_secondary_pll = k800_set_secondary_pll;
|
||||
|
||||
clock->set_engine_pll_state = set_engine_pll_state;
|
||||
clock->set_engine_pll = k800_set_engine_pll;
|
||||
break;
|
||||
case UNICHROME_VX855:
|
||||
case UNICHROME_VX900:
|
||||
clock->set_primary_clock_state = set_primary_clock_state;
|
||||
clock->set_primary_clock_source = set_primary_clock_source;
|
||||
clock->set_primary_pll_state = set_primary_pll_state;
|
||||
clock->set_primary_pll = vx855_set_primary_pll;
|
||||
|
||||
clock->set_secondary_clock_state = set_secondary_clock_state;
|
||||
clock->set_secondary_clock_source = set_secondary_clock_source;
|
||||
clock->set_secondary_pll_state = set_secondary_pll_state;
|
||||
clock->set_secondary_pll = vx855_set_secondary_pll;
|
||||
|
||||
clock->set_engine_pll_state = set_engine_pll_state;
|
||||
clock->set_engine_pll = vx855_set_engine_pll;
|
||||
break;
|
||||
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,76 @@
|
|||
/*
|
||||
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
|
||||
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
|
||||
* Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public
|
||||
* License as published by the Free Software Foundation;
|
||||
* either version 2, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
|
||||
* the implied warranty of MERCHANTABILITY or FITNESS FOR
|
||||
* A PARTICULAR PURPOSE.See the GNU General Public License
|
||||
* for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc.,
|
||||
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
/*
|
||||
* clock and PLL management functions
|
||||
*/
|
||||
|
||||
#ifndef __VIA_CLOCK_H__
|
||||
#define __VIA_CLOCK_H__
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
enum via_clksrc {
|
||||
VIA_CLKSRC_X1 = 0,
|
||||
VIA_CLKSRC_TVX1,
|
||||
VIA_CLKSRC_TVPLL,
|
||||
VIA_CLKSRC_DVP1TVCLKR,
|
||||
VIA_CLKSRC_CAP0,
|
||||
VIA_CLKSRC_CAP1,
|
||||
};
|
||||
|
||||
struct via_pll_config {
|
||||
u16 multiplier;
|
||||
u8 divisor;
|
||||
u8 rshift;
|
||||
};
|
||||
|
||||
struct via_clock {
|
||||
void (*set_primary_clock_state)(u8 state);
|
||||
void (*set_primary_clock_source)(enum via_clksrc src, bool use_pll);
|
||||
void (*set_primary_pll_state)(u8 state);
|
||||
void (*set_primary_pll)(struct via_pll_config config);
|
||||
|
||||
void (*set_secondary_clock_state)(u8 state);
|
||||
void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll);
|
||||
void (*set_secondary_pll_state)(u8 state);
|
||||
void (*set_secondary_pll)(struct via_pll_config config);
|
||||
|
||||
void (*set_engine_pll_state)(u8 state);
|
||||
void (*set_engine_pll)(struct via_pll_config config);
|
||||
};
|
||||
|
||||
|
||||
static inline u32 get_pll_internal_frequency(u32 ref_freq,
|
||||
struct via_pll_config pll)
|
||||
{
|
||||
return ref_freq / pll.divisor * pll.multiplier;
|
||||
}
|
||||
|
||||
static inline u32 get_pll_output_frequency(u32 ref_freq,
|
||||
struct via_pll_config pll)
|
||||
{
|
||||
return get_pll_internal_frequency(ref_freq, pll) >> pll.rshift;
|
||||
}
|
||||
|
||||
void via_clock_init(struct via_clock *clock, int gfx_chip);
|
||||
|
||||
#endif /* __VIA_CLOCK_H__ */
|
||||
|
|
@ -37,7 +37,6 @@ struct io_reg CN400_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
|
|||
{VIACR, CR69, 0xFF, 0x00},
|
||||
{VIACR, CR6A, 0xFF, 0x40},
|
||||
{VIACR, CR6B, 0xFF, 0x00},
|
||||
{VIACR, CR6C, 0xFF, 0x00},
|
||||
{VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */
|
||||
{VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */
|
||||
{VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */
|
||||
|
|
@ -83,7 +82,6 @@ struct io_reg CN700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
|
|||
{VIACR, CR69, 0xFF, 0x00},
|
||||
{VIACR, CR6A, 0xFD, 0x40},
|
||||
{VIACR, CR6B, 0xFF, 0x00},
|
||||
{VIACR, CR6C, 0xFF, 0x00},
|
||||
{VIACR, CR77, 0xFF, 0x00}, /* LCD scaling Factor */
|
||||
{VIACR, CR78, 0xFF, 0x00}, /* LCD scaling Factor */
|
||||
{VIACR, CR79, 0xFF, 0x00}, /* LCD scaling Factor */
|
||||
|
|
@ -153,7 +151,7 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
|
|||
{VIASR, SR1B, 0xFF, 0xF0},
|
||||
{VIASR, SR1E, 0xFF, 0x01},
|
||||
{VIASR, SR2A, 0xFF, 0x00},
|
||||
{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */
|
||||
{VIASR, SR2D, 0xC0, 0xC0}, /* delayed E3_ECK */
|
||||
{VIACR, CR32, 0xFF, 0x00},
|
||||
{VIACR, CR33, 0xFF, 0x00},
|
||||
{VIACR, CR35, 0xFF, 0x00},
|
||||
|
|
@ -162,7 +160,6 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
|
|||
{VIACR, CR69, 0xFF, 0x00},
|
||||
{VIACR, CR6A, 0xFF, 0x40},
|
||||
{VIACR, CR6B, 0xFF, 0x00},
|
||||
{VIACR, CR6C, 0xFF, 0x00},
|
||||
{VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */
|
||||
{VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */
|
||||
{VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */
|
||||
|
|
@ -192,7 +189,7 @@ struct io_reg VX855_ModeXregs[] = {
|
|||
{VIASR, SR2A, 0xF0, 0x00},
|
||||
{VIASR, SR58, 0xFF, 0x00},
|
||||
{VIASR, SR59, 0xFF, 0x00},
|
||||
{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */
|
||||
{VIASR, SR2D, 0xC0, 0xC0}, /* delayed E3_ECK */
|
||||
{VIACR, CR32, 0xFF, 0x00},
|
||||
{VIACR, CR33, 0x7F, 0x00},
|
||||
{VIACR, CR35, 0xFF, 0x00},
|
||||
|
|
@ -200,7 +197,6 @@ struct io_reg VX855_ModeXregs[] = {
|
|||
{VIACR, CR69, 0xFF, 0x00},
|
||||
{VIACR, CR6A, 0xFD, 0x60},
|
||||
{VIACR, CR6B, 0xFF, 0x00},
|
||||
{VIACR, CR6C, 0xFF, 0x00},
|
||||
{VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */
|
||||
{VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */
|
||||
{VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче