arm64: dts: Enable onboard SDHCI on msm8992
This enables SDHCI on the Nexus 5X as well creates common smd_rpm node which can be shared between both 5X and 6P as per HW design. Given the lack of documentation, only downstream code was used as a reference and it eludes to the fact that 8994-rpm-regulator is common between both msm8992 & msm8994. [ see msm.git branch: msm-angler-3.10-marshmallow-mr1, msm8992.dtsi] At this early stage of development it makes sense for the 8994-rpm-regulator to be common until data / documentation suggests otherwise. Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
Jeremy McNicoll
Andy Gross
Родитель
60cc43fc88
Коммит
f3b2c99e73
|
|
@ -39,3 +39,5 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
#include "msm8994-smd-rpm.dtsi"
|
||||
|
|
|
|||
|
|
@ -35,4 +35,64 @@
|
|||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
/* 0-3 for sdc1 4-6 for sdc2 */
|
||||
/* Order of pins */
|
||||
/* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
|
||||
/* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
|
||||
sdc1_clk_on: clk-on {
|
||||
pinconf {
|
||||
pins = "sdc1_clk";
|
||||
bias-disable = <0>; /* No pull */
|
||||
drive-strength = <16>; /* 16mA */
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_clk_off: clk-off {
|
||||
pinconf {
|
||||
pins = "sdc1_clk";
|
||||
bias-disable = <0>; /* No pull */
|
||||
drive-strength = <2>; /* 2mA */
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_cmd_on: cmd-on {
|
||||
pinconf {
|
||||
pins = "sdc1_cmd";
|
||||
bias-pull-up;
|
||||
drive-strength = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_cmd_off: cmd-off {
|
||||
pinconf {
|
||||
pins = "sdc1_cmd";
|
||||
bias-pull-up = <0x3>; /* same as 3.10 ?? */
|
||||
drive-strength = <2>; /* 2mA */
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_data_on: data-on {
|
||||
pinconf {
|
||||
pins = "sdc1_data";
|
||||
bias-pull-up;
|
||||
drive-strength = <8>; /* 8mA */
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_data_off: data-off {
|
||||
pinconf {
|
||||
pins = "sdc1_data";
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_rclk_on: rclk-on {
|
||||
bias-pull-down; /* pull down */
|
||||
};
|
||||
|
||||
sdc1_rclk_off: rclk-off {
|
||||
bias-pull-down; /* pull down */
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -202,6 +202,31 @@
|
|||
reg = <0xfc400000 0x2000>;
|
||||
};
|
||||
|
||||
sdhci1: mmc@f9824900 {
|
||||
compatible = "qcom,sdhci-msm-v4";
|
||||
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
|
||||
reg-names = "hc_mem", "core_mem";
|
||||
|
||||
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 138 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "hc_irq", "pwr_irq";
|
||||
|
||||
clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
|
||||
<&clock_gcc GCC_SDCC1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
|
||||
&sdc1_rclk_on>;
|
||||
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
|
||||
&sdc1_rclk_off>;
|
||||
|
||||
regulator-always-on;
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rpm_msg_ram: memory@fc428000 {
|
||||
compatible = "qcom,rpm-msg-ram";
|
||||
reg = <0xfc428000 0x4000>;
|
||||
|
|
@ -231,7 +256,67 @@
|
|||
};
|
||||
};
|
||||
|
||||
smd_rpm: smd {
|
||||
compatible = "qcom,smd";
|
||||
rpm {
|
||||
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
|
||||
qcom,ipc = <&apcs 8 0>;
|
||||
qcom,smd-edge = <15>;
|
||||
qcom,local-pid = <0>;
|
||||
qcom,remote-pid = <6>;
|
||||
|
||||
rpm-requests {
|
||||
compatible = "qcom,rpm-msm8994";
|
||||
qcom,smd-channels = "rpm_requests";
|
||||
|
||||
pm8994-regulators {
|
||||
compatible = "qcom,rpm-pm8994-regulators";
|
||||
|
||||
pm8994_s1: s1 {};
|
||||
pm8994_s2: s2 {};
|
||||
pm8994_s3: s3 {};
|
||||
pm8994_s4: s4 {};
|
||||
pm8994_s5: s5 {};
|
||||
pm8994_s6: s6 {};
|
||||
pm8994_s7: s7 {};
|
||||
|
||||
pm8994_l1: l1 {};
|
||||
pm8994_l2: l2 {};
|
||||
pm8994_l3: l3 {};
|
||||
pm8994_l4: l4 {};
|
||||
pm8994_l6: l6 {};
|
||||
pm8994_l8: l8 {};
|
||||
pm8994_l9: l9 {};
|
||||
pm8994_l10: l10 {};
|
||||
pm8994_l11: l11 {};
|
||||
pm8994_l12: l12 {};
|
||||
pm8994_l13: l13 {};
|
||||
pm8994_l14: l14 {};
|
||||
pm8994_l15: l15 {};
|
||||
pm8994_l16: l16 {};
|
||||
pm8994_l17: l17 {};
|
||||
pm8994_l18: l18 {};
|
||||
pm8994_l19: l19 {};
|
||||
pm8994_l20: l20 {};
|
||||
pm8994_l21: l21 {};
|
||||
pm8994_l22: l22 {};
|
||||
pm8994_l23: l23 {};
|
||||
pm8994_l24: l24 {};
|
||||
pm8994_l25: l25 {};
|
||||
pm8994_l26: l26 {};
|
||||
pm8994_l27: l27 {};
|
||||
pm8994_l28: l28 {};
|
||||
pm8994_l29: l29 {};
|
||||
pm8994_l30: l30 {};
|
||||
pm8994_l31: l31 {};
|
||||
pm8994_l32: l32 {};
|
||||
|
||||
pm8994_lvs1: lvs1 {};
|
||||
pm8994_lvs2: lvs2 {};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
#include "msm8992-pins.dtsi"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,276 @@
|
|||
/* Copyright (c) 2015, LGE Inc. All rights reserved.
|
||||
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
&smd_rpm {
|
||||
rpm {
|
||||
rpm_requests {
|
||||
pm8994-regulators {
|
||||
|
||||
vdd_l1-supply = <&pm8994_s1>;
|
||||
vdd_l2_26_28-supply = <&pm8994_s3>;
|
||||
vdd_l3_11-supply = <&pm8994_s3>;
|
||||
vdd_l4_27_31-supply = <&pm8994_s3>;
|
||||
vdd_l5_7-supply = <&pm8994_s3>;
|
||||
vdd_l6_12_32-supply = <&pm8994_s5>;
|
||||
vdd_l8_16_30-supply = <&vreg_vph_pwr>;
|
||||
vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
|
||||
vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
|
||||
vdd_l14_15-supply = <&pm8994_s5>;
|
||||
vdd_l17_29-supply = <&vreg_vph_pwr>;
|
||||
vdd_l20_21-supply = <&vreg_vph_pwr>;
|
||||
vdd_l25-supply = <&pm8994_s5>;
|
||||
vdd_lvs1_2 = <&pm8994_s4>;
|
||||
|
||||
s1 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
};
|
||||
|
||||
s2 {
|
||||
/* TODO */
|
||||
};
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <325000>;
|
||||
};
|
||||
|
||||
s5 {
|
||||
regulator-min-microvolt = <2150000>;
|
||||
regulator-max-microvolt = <2150000>;
|
||||
};
|
||||
|
||||
s7 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
};
|
||||
|
||||
l3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
/* TODO */
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
/* TODO */
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
qcom,init-voltage = <1200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
proxy-supply = <&pm8994_l12>;
|
||||
qcom,proxy-consumer-enable;
|
||||
qcom,proxy-consumer-current = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
qcom,init-voltage = <2950000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
qcom,init-voltage = <1200000>;
|
||||
proxy-supply = <&pm8994_l14>;
|
||||
qcom,proxy-consumer-enable;
|
||||
qcom,proxy-consumer-current = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
qcom,init-voltage = <2700000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
qcom,init-voltage = <2700000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
qcom,init-voltage = <3000000>;
|
||||
qcom,init-ldo-mode = <1>;
|
||||
};
|
||||
|
||||
l19 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
l20 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <570000>;
|
||||
};
|
||||
|
||||
l21 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
qcom,init-voltage = <1800000>;
|
||||
};
|
||||
|
||||
l22 {
|
||||
regulator-min-microvolt = <3100000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
qcom,init-voltage = <3100000>;
|
||||
};
|
||||
|
||||
l23 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
qcom,init-voltage = <2800000>;
|
||||
};
|
||||
|
||||
l24 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3150000>;
|
||||
qcom,init-voltage = <3075000>;
|
||||
};
|
||||
|
||||
l25 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
};
|
||||
|
||||
l26 {
|
||||
/* TODO: value from downstream
|
||||
regulator-min-microvolt = <987500>;
|
||||
fails to apply */
|
||||
};
|
||||
|
||||
l27 {
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
qcom,init-voltage = <1050000>;
|
||||
};
|
||||
|
||||
l28 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
qcom,init-voltage = <1000000>;
|
||||
proxy-supply = <&pm8994_l28>;
|
||||
qcom,proxy-consumer-enable;
|
||||
qcom,proxy-consumer-current = <10000>;
|
||||
};
|
||||
|
||||
l29 {
|
||||
/* TODO: Unsupported voltage range.
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
qcom,init-voltage = <2800000>;
|
||||
*/
|
||||
};
|
||||
|
||||
l30 {
|
||||
/* TODO: get this verified
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
*/
|
||||
};
|
||||
|
||||
l31 {
|
||||
regulator-min-microvolt = <1262500>;
|
||||
regulator-max-microvolt = <1262500>;
|
||||
qcom,init-voltage = <1262500>;
|
||||
};
|
||||
|
||||
l32 {
|
||||
/* TODO: get this verified
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
*/
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче