Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

This commit is contained in:
Steve French 2006-06-07 02:40:03 +00:00
Родитель 5bafd76593 1def630a6a
Коммит f3ffb68144
135 изменённых файлов: 1048 добавлений и 697 удалений

Просмотреть файл

@ -214,12 +214,13 @@ hardware.
The interaction of the iflag bits is as follows (parity error
given as an example):
Parity error INPCK IGNPAR
None n/a n/a character received
Yes n/a 0 character discarded
Yes 0 1 character received, marked as
n/a 0 n/a character received, marked as
TTY_NORMAL
Yes 1 1 character received, marked as
None 1 n/a character received, marked as
TTY_NORMAL
Yes 1 0 character received, marked as
TTY_PARITY
Yes 1 1 character discarded
Other flags may be used (eg, xon/xoff characters) if your
hardware supports hardware "soft" flow control.

Просмотреть файл

@ -568,6 +568,18 @@ L: linuxppc-dev@ozlabs.org
W: http://www.penguinppc.org/ppc64/
S: Supported
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
P: Michael Chan
M: mchan@broadcom.com
L: netdev@vger.kernel.org
S: Supported
BROADCOM TG3 GIGABIT ETHERNET DRIVER
P: Michael Chan
M: mchan@broadcom.com
L: netdev@vger.kernel.org
S: Supported
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
@ -1877,6 +1889,11 @@ L: linux-kernel@vger.kernel.org
W: http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
S: Maintained
MULTIMEDIA CARD SUBSYSTEM
P: Russell King
M: rmk+mmc@arm.linux.org.uk
S: Maintained
MULTISOUND SOUND DRIVER
P: Andrew Veliath
M: andrewtv@usa.net

Просмотреть файл

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 17
EXTRAVERSION =-rc5
NAME=Lordi Rules
EXTRAVERSION =-rc6
NAME=Crazed Snow-Weasel
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

Просмотреть файл

@ -182,7 +182,6 @@ EXPORT_SYMBOL(smp_num_cpus);
EXPORT_SYMBOL(smp_call_function);
EXPORT_SYMBOL(smp_call_function_on_cpu);
EXPORT_SYMBOL(_atomic_dec_and_lock);
EXPORT_SYMBOL(cpu_present_mask);
#endif /* CONFIG_SMP */
/*

Просмотреть файл

@ -94,7 +94,7 @@ common_shutdown_1(void *generic_ptr)
if (cpuid != boot_cpuid) {
flags |= 0x00040000UL; /* "remain halted" */
*pflags = flags;
clear_bit(cpuid, &cpu_present_mask);
cpu_clear(cpuid, cpu_present_map);
halt();
}
#endif
@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
cpu_clear(boot_cpuid, cpu_possible_map);
while (cpus_weight(cpu_possible_map))
cpu_clear(boot_cpuid, cpu_present_map);
while (cpus_weight(cpu_present_map))
barrier();
#endif

Просмотреть файл

@ -68,7 +68,6 @@ enum ipi_message_type {
static int smp_secondary_alive __initdata = 0;
/* Which cpus ids came online. */
cpumask_t cpu_present_mask;
cpumask_t cpu_online_map;
EXPORT_SYMBOL(cpu_online_map);
@ -439,7 +438,7 @@ setup_smp(void)
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
/* Assume here that "whami" == index */
cpu_set(i, cpu_present_mask);
cpu_set(i, cpu_present_map);
cpu->pal_revision = boot_cpu_palrev;
}
@ -450,11 +449,10 @@ setup_smp(void)
}
} else {
smp_num_probed = 1;
cpu_set(boot_cpuid, cpu_present_mask);
}
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
smp_num_probed, cpu_possible_map.bits[0]);
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n",
smp_num_probed, cpu_present_map.bits[0]);
}
/*
@ -473,7 +471,7 @@ smp_prepare_cpus(unsigned int max_cpus)
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
cpu_present_mask = cpumask_of_cpu(boot_cpuid);
cpu_present_map = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}
@ -486,10 +484,6 @@ smp_prepare_cpus(unsigned int max_cpus)
void __devinit
smp_prepare_boot_cpu(void)
{
/*
* Mark the boot cpu (current cpu) as online
*/
cpu_set(smp_processor_id(), cpu_online_map);
}
int __devinit

Просмотреть файл

@ -66,7 +66,7 @@ titan_update_irq_hw(unsigned long mask)
register int bcpu = boot_cpuid;
#ifdef CONFIG_SMP
cpumask_t cpm = cpu_present_mask;
cpumask_t cpm = cpu_present_map;
volatile unsigned long *dim0, *dim1, *dim2, *dim3;
unsigned long mask0, mask1, mask2, mask3, dummy;

Просмотреть файл

@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART
help
Choice for UART for kernel low-level using S3C2410 UARTS,
should be between zero and two. The port must have been
initalised by the boot-loader before use.
initialised by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C2410_LOWLEVEL_UART_PORT.

Просмотреть файл

@ -178,8 +178,12 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
static void ixp23xx_irq_mask(unsigned int irq)
{
volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
volatile unsigned long *intr_reg;
if (irq >= 56)
irq += 8;
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg &= ~(1 << (irq % 32));
}
@ -199,17 +203,25 @@ static void ixp23xx_irq_ack(unsigned int irq)
*/
static void ixp23xx_irq_level_unmask(unsigned int irq)
{
volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
volatile unsigned long *intr_reg;
ixp23xx_irq_ack(irq);
if (irq >= 56)
irq += 8;
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
static void ixp23xx_irq_edge_unmask(unsigned int irq)
{
volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
volatile unsigned long *intr_reg;
if (irq >= 56)
irq += 8;
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}

Просмотреть файл

@ -141,7 +141,7 @@ config IXP4XX_INDIRECT_PCI
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access PCI This allows
for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
The disadvantadge of this is that every PCI access requires
The disadvantage of this is that every PCI access requires
three local register accesses plus a spinlock, but in some
cases the performance hit is acceptable. In addition, you cannot
mmap() PCI devices in this case due to the indirect nature

Просмотреть файл

@ -493,6 +493,7 @@ static void __init mainstone_map_io(void)
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.phys_io = 0x40000000,
.boot_params = 0xa0000100, /* BLOB boot parameter setting */
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = mainstone_map_io,
.init_irq = mainstone_init_irq,

Просмотреть файл

@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG
depends on ARCH_S3C2410 && PM
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C2410_PM_CHECK

Просмотреть файл

@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
ecc_mask = 0;
}
if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
if (mem_types[i].prot_l1)
mem_types[i].prot_l1 |= PMD_BIT4;
@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
pgd = init_mm.pgd;
base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
base_pmdval |= PMD_BIT4;
for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {

Просмотреть файл

@ -13,7 +13,7 @@ choice
default SGI_IP22
config MIPS_MTX1
bool "Support for 4G Systems MTX-1 board"
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SOC_AU1500
@ -120,7 +120,7 @@ config MIPS_MIRAGE
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_COBALT
bool "Support for Cobalt Server"
bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
select I8259
@ -132,7 +132,7 @@ config MIPS_COBALT
select SYS_SUPPORTS_LITTLE_ENDIAN
config MACH_DECSTATION
bool "Support for DECstations"
bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select EARLY_PRINTK
@ -158,7 +158,7 @@ config MACH_DECSTATION
otherwise choose R3000.
config MIPS_EV64120
bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
@ -175,7 +175,7 @@ config MIPS_EV64120
kernel for this platform.
config MIPS_EV96100
bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
@ -195,7 +195,7 @@ config MIPS_EV96100
here if you wish to build a kernel for this platform.
config MIPS_IVR
bool "Support for Globespan IVR board"
bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
@ -211,7 +211,7 @@ config MIPS_IVR
build a kernel for this platform.
config MIPS_ITE8172
bool "Support for ITE 8172G board"
bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
@ -228,7 +228,7 @@ config MIPS_ITE8172
a kernel for this platform.
config MACH_JAZZ
bool "Support for the Jazz family of machines"
bool "Jazz family of machines"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
@ -246,7 +246,7 @@ config MACH_JAZZ
Olivetti M700-10 workstations.
config LASAT
bool "Support for LASAT Networks platforms"
bool "LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_GT64120
@ -258,7 +258,7 @@ config LASAT
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_ATLAS
bool "Support for MIPS Atlas board"
bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
@ -283,7 +283,7 @@ config MIPS_ATLAS
board.
config MIPS_MALTA
bool "Support for MIPS Malta board"
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
@ -311,7 +311,7 @@ config MIPS_MALTA
board.
config MIPS_SEAD
bool "Support for MIPS SEAD board (EXPERIMENTAL)"
bool "MIPS SEAD board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
@ -328,7 +328,7 @@ config MIPS_SEAD
board.
config MIPS_SIM
bool 'Support for MIPS simulator (MIPSsim)'
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@ -341,7 +341,7 @@ config MIPS_SIM
emulator.
config MOMENCO_JAGUAR_ATX
bool "Support for Momentum Jaguar board"
bool "Momentum Jaguar board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT
bool "Support for Momentum Ocelot board"
bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@ -378,7 +378,7 @@ config MOMENCO_OCELOT
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_3
bool "Support for Momentum Ocelot-3 board"
bool "Momentum Ocelot-3 board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
PMC-Sierra Rm79000 core.
config MOMENCO_OCELOT_C
bool "Support for Momentum Ocelot-C board"
bool "Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_G
bool "Support for Momentum Ocelot-G board"
bool "Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
Momentum Computer <http://www.momenco.com/>.
config MIPS_XXS1500
bool "Support for MyCable XXS1500 board"
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_V2PCI
bool "Support for Philips PNX8550 based Viper2-PCI board"
bool "Philips PNX8550 based Viper2-PCI board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
bool "Support for Philips PNX8550 based JBS board"
bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5074
bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DDB5XXX_COMMON
select DMA_NONCOHERENT
@ -465,7 +465,7 @@ config DDB5074
evaluation board.
config DDB5476
bool "Support for NEC DDB Vrc-5476"
bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
@ -486,7 +486,7 @@ config DDB5476
IDE controller, PS2 keyboard, PS2 mouse, etc.
config DDB5477
bool "Support for NEC DDB Vrc-5477"
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HW_HAS_PCI
@ -504,13 +504,13 @@ config DDB5477
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
bool "Support for NEC VR4100 series based machines"
bool "NEC VR41XX-based machines"
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
bool "Support for PMC-Sierra Yosemite eval board"
bool "PMC-Sierra Yosemite eval board"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
@ -527,7 +527,7 @@ config PMC_YOSEMITE
manufactured by PMC-Sierra.
config QEMU
bool "Support for Qemu"
bool "Qemu"
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
@ -547,7 +547,7 @@ config QEMU
can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
bool "Support for SGI IP22 (Indy/Indigo2)"
bool "SGI IP22 (Indy/Indigo2)"
select ARC
select ARC32
select BOOT_ELF32
@ -567,7 +567,7 @@ config SGI_IP22
that runs on these, say Y here.
config SGI_IP27
bool "Support for SGI IP27 (Origin200/2000)"
bool "SGI IP27 (Origin200/2000)"
select ARC
select ARC64
select BOOT_ELF64
@ -583,7 +583,7 @@ config SGI_IP27
here.
config SGI_IP32
bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
bool "SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select ARC
select ARC32
@ -604,7 +604,7 @@ config SGI_IP32
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
bool "Support for Sibyte BCM91480B-BigSur"
bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
@ -615,7 +615,7 @@ config SIBYTE_BIGSUR
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SWARM
bool "Support for Sibyte BCM91250A-SWARM"
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select SIBYTE_SB1250
@ -626,7 +626,7 @@ config SIBYTE_SWARM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
bool "Support for Sibyte BCM91250E-Sentosa"
bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -637,7 +637,7 @@ config SIBYTE_SENTOSA
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
bool "Support for Sibyte BCM91125E-Rhone"
bool "Sibyte BCM91125E-Rhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -648,7 +648,7 @@ config SIBYTE_RHONE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CARMEL
bool "Support for Sibyte BCM91120x-Carmel"
bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -659,7 +659,7 @@ config SIBYTE_CARMEL
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_PTSWARM
bool "Support for Sibyte BCM91250PT-PTSWARM"
bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -671,7 +671,7 @@ config SIBYTE_PTSWARM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_LITTLESUR
bool "Support for Sibyte BCM91250C2-LittleSur"
bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHINE
bool "Support for Sibyte BCM91120C-CRhine"
bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -694,7 +694,7 @@ config SIBYTE_CRHINE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHONE
bool "Support for Sibyte BCM91125C-CRhone"
bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@ -706,7 +706,7 @@ config SIBYTE_CRHONE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
bool "Support for SNI RM200 PCI"
bool "SNI RM200 PCI"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
@ -732,7 +732,7 @@ config SNI_RM200_PCI
support this machine type.
config TOSHIBA_JMR3927
bool "Support for Toshiba JMR-TX3927 board"
bool "Toshiba JMR-TX3927 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
@ -743,7 +743,7 @@ config TOSHIBA_JMR3927
select TOSHIBA_BOARDS
config TOSHIBA_RBTX4927
bool "Support for Toshiba TBTX49[23]7 board"
bool "Toshiba TBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927
support this machine type
config TOSHIBA_RBTX4938
bool "Support for Toshiba RBTX4938 board"
bool "Toshiba RBTX4938 board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
@ -1411,13 +1411,12 @@ config PAGE_SIZE_8KB
config PAGE_SIZE_16KB
bool "16kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
depends on !CPU_R3000 && !CPU_TX39XX
help
Using 16kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
all non-R3000 family processor. Not that at the time of this
writing this option is still high experimental; there are also
issues with compatibility of user applications.
all non-R3000 family processors. Note that you will need a suitable
Linux distribution to support this.
config PAGE_SIZE_64KB
bool "64kB"
@ -1426,8 +1425,7 @@ config PAGE_SIZE_64KB
Using 64kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
all non-R3000 family processor. Not that at the time of this
writing this option is still high experimental; there are also
issues with compatibility of user applications.
writing this option is still high experimental.
endchoice

Просмотреть файл

@ -68,6 +68,7 @@
extern void set_debug_traps(void);
extern irq_cpustat_t irq_stat [NR_CPUS];
extern void mips_timer_interrupt(struct pt_regs *regs);
static void setup_local_irq(unsigned int irq, int type, int int_req);
static unsigned int startup_irq(unsigned int irq);

Просмотреть файл

@ -1,10 +1,9 @@
/*
*
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, assuming a version of
* pmon is the boot code.
* PROM library initialisation code, assuming YAMON is the boot loader.
*
* Copyright 2000,2001 MontaVista Software Inc.
* Copyright 2000, 2001, 2006 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
@ -49,9 +48,9 @@ extern char **prom_argv, **prom_envp;
typedef struct
{
char *name;
/* char *val; */
}t_env_var;
char *name;
char *val;
} t_env_var;
char * prom_getcmdline(void)
@ -85,21 +84,16 @@ char *prom_getenv(char *envname)
{
/*
* Return a pointer to the given environment variable.
* Environment variables are stored in the form of "memsize=64".
*/
t_env_var *env = (t_env_var *)prom_envp;
int i;
i = strlen(envname);
while(env->name) {
if(strncmp(envname, env->name, i) == 0) {
return(env->name + strlen(envname) + 1);
}
while (env->name) {
if (strcmp(envname, env->name) == 0)
return env->val;
env++;
}
return(NULL);
return NULL;
}
inline unsigned char str2hexnum(unsigned char c)

Просмотреть файл

@ -112,6 +112,11 @@ sdsleep:
mtc0 k0, CP0_PAGEMASK
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
/* We need to catch the ealry Alchemy SOCs with
* the write-only Config[OD] bit and set it back to one...
*/
jal au1x00_fixup_config_od
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)

Просмотреть файл

@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs)
null:
ack_r4ktimer(0);
irq_exit();
}
#ifdef CONFIG_PM

Просмотреть файл

@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
* since became unsure of above "buad rate" algorithm (??).
* since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above

Просмотреть файл

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -272,8 +272,8 @@ void output_sc_defines(void)
text("/* Linux sigcontext offsets. */");
offset("#define SC_REGS ", struct sigcontext, sc_regs);
offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
offset("#define SC_MDHI ", struct sigcontext, sc_hi);
offset("#define SC_MDLO ", struct sigcontext, sc_lo);
offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
offset("#define SC_PC ", struct sigcontext, sc_pc);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
linefeed;

Просмотреть файл

@ -206,7 +206,7 @@ static inline void check_daddi(void)
"daddi %0, %1, %3\n\t"
".set pop"
: "=r" (v), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
set_except_vector(12, handler);
local_irq_restore(flags);
@ -224,7 +224,7 @@ static inline void check_daddi(void)
"dsrl %1, %1, 1\n\t"
"daddi %0, %1, %3"
: "=r" (v), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
set_except_vector(12, handler);
local_irq_restore(flags);
@ -280,7 +280,7 @@ static inline void check_daddiu(void)
"daddu %1, %2\n\t"
".set pop"
: "=&r" (v), "=&r" (w), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
if (v == w) {
printk("no.\n");
@ -296,7 +296,7 @@ static inline void check_daddiu(void)
"addiu %1, $0, %4\n\t"
"daddu %1, %2"
: "=&r" (v), "=&r" (w), "=&r" (tmp)
: "I" (0xffffffffffffdb9a), "I" (0x1234));
: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
if (v == w) {
printk("yes.\n");

Просмотреть файл

@ -121,6 +121,7 @@ static inline void check_wait(void)
case CPU_24K:
case CPU_25KF:
case CPU_34K:
case CPU_74K:
case CPU_PR4450:
cpu_wait = r4k_wait;
printk(" available.\n");
@ -432,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
case PRID_IMP_R14000:
c->cputype = CPU_R14000;
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
}
}
@ -593,6 +603,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
case PRID_IMP_34K:
c->cputype = CPU_34K;
break;
case PRID_IMP_74K:
c->cputype = CPU_74K;
break;
}
}
@ -642,7 +655,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
/* FPU in pass1 is known to have issues. */
if ((c->processor_id & 0xff) < 0x20)
if ((c->processor_id & 0xff) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:

Просмотреть файл

@ -101,7 +101,7 @@ FEXPORT(restore_all) # restore full frame
EMT
1:
mfc0 v1, CP0_TCSTATUS
/* We set IXMT above, XOR should cler it here */
/* We set IXMT above, XOR should clear it here */
xori v1, v1, TCSTATUS_IXMT
or v1, v0, v1
mtc0 v1, CP0_TCSTATUS

Просмотреть файл

@ -54,9 +54,11 @@
*/
mfc0 k0, CP0_CAUSE
andi k0, k0, 0x7c
add k1, k1, k0
PTR_L k0, saved_vectors(k1)
jr k0
#ifdef CONFIG_64BIT
dsll k0, k0, 1
#endif
PTR_L k1, saved_vectors(k0)
jr k1
nop
1:
move k0, sp

Просмотреть файл

@ -288,6 +288,9 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
if (!sym->st_value) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
printk(KERN_WARNING "%s: Unknown symbol %s\n",
me->name, strtab + sym->st_name);
return -ENOENT;
@ -325,6 +328,9 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
if (!sym->st_value) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
printk(KERN_WARNING "%s: Unknown symbol %s\n",
me->name, strtab + sym->st_name);
return -ENOENT;

Просмотреть файл

@ -42,6 +42,7 @@ static const char *cpu_name[] = {
[CPU_R8000] = "R8000",
[CPU_R10000] = "R10000",
[CPU_R12000] = "R12000",
[CPU_R14000] = "R14000",
[CPU_R4300] = "R4300",
[CPU_R4650] = "R4650",
[CPU_R4700] = "R4700",
@ -74,6 +75,7 @@ static const char *cpu_name[] = {
[CPU_24K] = "MIPS 24K",
[CPU_25KF] = "MIPS 25Kf",
[CPU_34K] = "MIPS 34K",
[CPU_74K] = "MIPS 74K",
[CPU_VR4111] = "NEC VR4111",
[CPU_VR4121] = "NEC VR4121",
[CPU_VR4122] = "NEC VR4122",

Просмотреть файл

@ -209,7 +209,7 @@ sys_call_table:
PTR sys_fork
PTR sys_read
PTR sys_write
PTR sys_open /* 4005 */
PTR compat_sys_open /* 4005 */
PTR sys_close
PTR sys_waitpid
PTR sys_creat

Просмотреть файл

@ -246,7 +246,7 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en
#ifdef CONFIG_64BIT
/* HACK: Guess if the sign extension was forgotten */
if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
start |= 0xffffffff00000000;
start |= 0xffffffff00000000UL;
#endif
end = start + size;
@ -355,8 +355,6 @@ static inline void bootmem_init(void)
}
#endif
memory_present(0, first_usable_pfn, max_low_pfn);
/* Initialize the boot-time allocator with low memory only. */
bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
@ -410,6 +408,7 @@ static inline void bootmem_init(void)
/* Register lowmem ranges */
free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
memory_present(0, curr_pfn, curr_pfn + size - 1);
}
/* Reserve the bootmap memory. */
@ -419,17 +418,20 @@ static inline void bootmem_init(void)
#ifdef CONFIG_BLK_DEV_INITRD
initrd_below_start_ok = 1;
if (initrd_start) {
unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
unsigned long initrd_size = ((unsigned char *)initrd_end) -
((unsigned char *)initrd_start);
const int width = sizeof(long) * 2;
printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
(void *)initrd_start, initrd_size);
if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
printk("initrd extends beyond end of memory "
"(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
sizeof(long) * 2,
(unsigned long long)CPHYSADDR(initrd_end),
sizeof(long) * 2,
(unsigned long long)PFN_PHYS(max_low_pfn));
width,
(unsigned long long) CPHYSADDR(initrd_end),
width,
(unsigned long long) PFN_PHYS(max_low_pfn));
initrd_start = initrd_end = 0;
initrd_reserve_bootmem = 0;
}

Просмотреть файл

@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
save_gp_reg(31);
#undef save_gp_reg
#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
err |= __put_user(mflo3(), &sc->sc_lo3);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
#endif
#ifdef CONFIG_64BIT
err |= __put_user(regs->hi, &sc->sc_hi[0]);
err |= __put_user(regs->lo, &sc->sc_lo[0]);
if (cpu_has_dsp) {
err |= __put_user(mfhi1(), &sc->sc_hi[1]);
err |= __put_user(mflo1(), &sc->sc_lo[1]);
err |= __put_user(mfhi2(), &sc->sc_hi[2]);
err |= __put_user(mflo2(), &sc->sc_lo[2]);
err |= __put_user(mfhi3(), &sc->sc_hi[3]);
err |= __put_user(mflo3(), &sc->sc_lo[3]);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
#endif
#ifdef CONFIG_64BIT
err |= __get_user(regs->hi, &sc->sc_hi[0]);
err |= __get_user(regs->lo, &sc->sc_lo[0]);
if (cpu_has_dsp) {
err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \

Просмотреть файл

@ -247,6 +247,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
current_thread_info()->cpu = 0;
smp_tune_scheduling();
plat_prepare_cpus(max_cpus);
#ifndef CONFIG_HOTPLUG_CPU
cpu_present_map = cpu_possible_map;
#endif
}
/* preload SMP state for boot cpu */
@ -442,7 +445,7 @@ static int __init topology_init(void)
int cpu;
int ret;
for_each_cpu(cpu) {
for_each_present_cpu(cpu) {
ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
if (ret)
printk(KERN_WARNING "topology_init: register_cpu %d "

Просмотреть файл

@ -276,31 +276,9 @@ void sys_set_thread_area(unsigned long addr)
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
{
int tmp, len;
char __user *name;
int tmp;
switch(cmd) {
case SETNAME: {
char nodename[__NEW_UTS_LEN + 1];
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
name = (char __user *) arg1;
len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
if (len < 0)
return -EFAULT;
down_write(&uts_sem);
strncpy(system_utsname.nodename, nodename, len);
nodename[__NEW_UTS_LEN] = '\0';
strlcpy(system_utsname.nodename, nodename,
sizeof(system_utsname.nodename));
up_write(&uts_sem);
return 0;
}
case MIPS_ATOMIC_SET:
printk(KERN_CRIT "How did I get here?\n");
return -EINVAL;
@ -313,9 +291,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
case FLUSH_CACHE:
__flush_cache_all();
return 0;
case MIPS_RDNVRAM:
return -EIO;
}
return -EINVAL;

Просмотреть файл

@ -819,15 +819,30 @@ asmlinkage void do_watch(struct pt_regs *regs)
asmlinkage void do_mcheck(struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
int multi_match = regs->cp0_status & ST0_TS;
show_regs(regs);
dump_tlb_all();
if (multi_match) {
printk("Index : %0x\n", read_c0_index());
printk("Pagemask: %0x\n", read_c0_pagemask());
printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
printk("\n");
dump_tlb_all();
}
show_code((unsigned int *) regs->cp0_epc);
/*
* Some chips may have other causes of machine check (e.g. SB1
* graduation timer)
*/
panic("Caught Machine Check exception - %scaused by multiple "
"matching entries in the TLB.",
(regs->cp0_status & ST0_TS) ? "" : "not ");
(multi_match) ? "" : "not ");
}
asmlinkage void do_mt(struct pt_regs *regs)
@ -902,6 +917,7 @@ static inline void parity_protection_init(void)
{
switch (current_cpu_data.cputype) {
case CPU_24K:
case CPU_34K:
case CPU_5KC:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();

Просмотреть файл

@ -151,23 +151,13 @@ SECTIONS
/* This is the MIPS specific mdebug section. */
.mdebug : { *(.mdebug) }
/* These are needed for ELF backends which have not yet been
converted to the new style linker. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
/* DWARF debug sections.
Symbols in the .debug DWARF section are relative to the beginning of the
section so we begin .debug at 0. It's not clear yet what needs to happen
for the others. */
.debug 0 : { *(.debug) }
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_sfnames 0 : { *(.debug_sfnames) }
.line 0 : { *(.line) }
STABS_DEBUG
DWARF_DEBUG
/* These must appear regardless of . */
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
.comment : { *(.comment) }
.note : { *(.note) }
}

Просмотреть файл

@ -29,7 +29,9 @@
ieee754dp ieee754dp_fint(int x)
{
COMPXDP;
u64 xm;
int xe;
int xs;
CLEARCX;

Просмотреть файл

@ -29,7 +29,9 @@
ieee754dp ieee754dp_flong(s64 x)
{
COMPXDP;
u64 xm;
int xe;
int xs;
CLEARCX;

Просмотреть файл

@ -29,7 +29,9 @@
ieee754sp ieee754sp_fint(int x)
{
COMPXSP;
unsigned xm;
int xe;
int xs;
CLEARCX;

Просмотреть файл

@ -29,7 +29,9 @@
ieee754sp ieee754sp_flong(s64 x)
{
COMPXDP; /* <--- need 64-bit mantissa temp */
u64 xm; /* <--- need 64-bit mantissa temp */
int xe;
int xs;
CLEARCX;

Просмотреть файл

@ -29,6 +29,27 @@
#include <asm/war.h>
#include <asm/cacheflush.h> /* for run_uncached() */
/*
* Special Variant of smp_call_function for use by cache functions:
*
* o No return value
* o collapses to normal function call on UP kernels
* o collapses to normal function call on systems with a single shared
* primary cache.
*/
static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
int retry, int wait)
{
preempt_disable();
#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
smp_call_function(func, info, retry, wait);
#endif
func(info);
preempt_enable();
}
/*
* Must die.
*/
@ -299,7 +320,7 @@ static void r4k_flush_cache_all(void)
if (!cpu_has_dc_aliases)
return;
on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k___flush_cache_all(void * args)
@ -314,13 +335,14 @@ static inline void local_r4k___flush_cache_all(void * args)
case CPU_R4400MC:
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
r4k_blast_scache();
}
}
static void r4k___flush_cache_all(void)
{
on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k_flush_cache_range(void * args)
@ -341,7 +363,7 @@ static inline void local_r4k_flush_cache_range(void * args)
static void r4k_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
}
static inline void local_r4k_flush_cache_mm(void * args)
@ -370,7 +392,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
if (!cpu_has_dc_aliases)
return;
on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
}
struct flush_cache_page_args {
@ -461,7 +483,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
args.addr = addr;
args.pfn = pfn;
on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
static inline void local_r4k_flush_data_cache_page(void * addr)
@ -471,7 +493,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr)
static void r4k_flush_data_cache_page(unsigned long addr)
{
on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
}
struct flush_icache_range_args {
@ -514,7 +536,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
args.start = start;
args.end = end;
on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
instruction_hazard();
}
@ -590,7 +612,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma,
args.vma = vma;
args.page = page;
on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
}
@ -689,7 +711,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
static void r4k_flush_cache_sigtramp(unsigned long addr)
{
on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
}
static void r4k_flush_icache_all(void)
@ -812,6 +834,7 @@ static void __init probe_pcache(void)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
c->icache.linesz = 64;
c->icache.ways = 2;
@ -965,9 +988,11 @@ static void __init probe_pcache(void)
c->dcache.flags |= MIPS_CACHE_PINDEX;
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_SB1:
break;
case CPU_24K:
case CPU_34K:
if (!(read_c0_config7() & (1 << 16)))
default:
if (c->dcache.waysize > PAGE_SIZE)
@ -1091,6 +1116,7 @@ static void __init setup_scache(void)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
c->scache.linesz = 64 << ((config >> 13) & 1);
c->scache.ways = 2;
@ -1135,6 +1161,31 @@ static void __init setup_scache(void)
c->options |= MIPS_CPU_SUBSET_CACHES;
}
void au1x00_fixup_config_od(void)
{
/*
* c0_config.od (bit 19) was write only (and read as 0)
* on the early revisions of Alchemy SOCs. It disables the bus
* transaction overlapping and needs to be set to fix various errata.
*/
switch (read_c0_prid()) {
case 0x00030100: /* Au1000 DA */
case 0x00030201: /* Au1000 HA */
case 0x00030202: /* Au1000 HB */
case 0x01030200: /* Au1500 AB */
/*
* Au1100 errata actually keeps silence about this bit, so we set it
* just in case for those revisions that require it to be set according
* to arch/mips/au1000/common/cputable.c
*/
case 0x02030200: /* Au1100 AB */
case 0x02030201: /* Au1100 BA */
case 0x02030202: /* Au1100 BC */
set_c0_config(1 << 19);
break;
}
}
static inline void coherency_setup(void)
{
change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
@ -1155,6 +1206,15 @@ static inline void coherency_setup(void)
case CPU_R4400MC:
clear_c0_config(CONF_CU);
break;
/*
* We need to catch the ealry Alchemy SOCs with
* the write-only co_config.od bit and set it back to one...
*/
case CPU_AU1000: /* rev. DA, HA, HB */
case CPU_AU1100: /* rev. AB, BA, BC ?? */
case CPU_AU1500: /* rev. AB */
au1x00_fixup_config_od();
break;
}
}

Просмотреть файл

@ -227,7 +227,7 @@ void __init mem_init(void)
for (tmp = 0; tmp < max_low_pfn; tmp++)
if (page_is_ram(tmp)) {
ram++;
if (PageReserved(mem_map+tmp))
if (PageReserved(pfn_to_page(tmp)))
reservedpages++;
}

Просмотреть файл

@ -357,6 +357,7 @@ void __init build_clear_page(void)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
pref_src_mode = Pref_LoadStreamed;
pref_dst_mode = Pref_StoreStreamed;
break;

Просмотреть файл

@ -875,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
@ -906,6 +907,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
case CPU_4KEC:
case CPU_24K:
case CPU_34K:
case CPU_74K:
i_ehb(p);
tlbw(p);
break;

Просмотреть файл

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
/* set up buad rate */
/* set up baud rate */
{
uint32 divisor;

Просмотреть файл

@ -14,8 +14,8 @@
#include "op_impl.h"
extern struct op_mips_model op_model_mipsxx __attribute__((weak));
extern struct op_mips_model op_model_rm9000 __attribute__((weak));
extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
static struct op_mips_model *model;
@ -80,13 +80,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_24K:
case CPU_25KF:
case CPU_34K:
case CPU_74K:
case CPU_SB1:
case CPU_SB1A:
lmodel = &op_model_mipsxx;
lmodel = &op_model_mipsxx_ops;
break;
case CPU_RM9000:
lmodel = &op_model_rm9000;
lmodel = &op_model_rm9000_ops;
break;
};

Просмотреть файл

@ -23,7 +23,7 @@
#define M_COUNTER_OVERFLOW (1UL << 31)
struct op_mips_model op_model_mipsxx;
struct op_mips_model op_model_mipsxx_ops;
static struct mipsxx_register_config {
unsigned int control[4];
@ -34,7 +34,7 @@ static struct mipsxx_register_config {
static void mipsxx_reg_setup(struct op_counter_config *ctr)
{
unsigned int counters = op_model_mipsxx.num_counters;
unsigned int counters = op_model_mipsxx_ops.num_counters;
int i;
/* Compute the performance counter control word. */
@ -62,7 +62,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
static void mipsxx_cpu_setup (void *args)
{
unsigned int counters = op_model_mipsxx.num_counters;
unsigned int counters = op_model_mipsxx_ops.num_counters;
switch (counters) {
case 4:
@ -83,7 +83,7 @@ static void mipsxx_cpu_setup (void *args)
/* Start all counters on current CPU */
static void mipsxx_cpu_start(void *args)
{
unsigned int counters = op_model_mipsxx.num_counters;
unsigned int counters = op_model_mipsxx_ops.num_counters;
switch (counters) {
case 4:
@ -100,7 +100,7 @@ static void mipsxx_cpu_start(void *args)
/* Stop all counters on current CPU */
static void mipsxx_cpu_stop(void *args)
{
unsigned int counters = op_model_mipsxx.num_counters;
unsigned int counters = op_model_mipsxx_ops.num_counters;
switch (counters) {
case 4:
@ -116,7 +116,7 @@ static void mipsxx_cpu_stop(void *args)
static int mipsxx_perfcount_handler(struct pt_regs *regs)
{
unsigned int counters = op_model_mipsxx.num_counters;
unsigned int counters = op_model_mipsxx_ops.num_counters;
unsigned int control;
unsigned int counter;
int handled = 0;
@ -187,33 +187,37 @@ static int __init mipsxx_init(void)
reset_counters(counters);
op_model_mipsxx.num_counters = counters;
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_data.cputype) {
case CPU_20KC:
op_model_mipsxx.cpu_type = "mips/20K";
op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
case CPU_24K:
op_model_mipsxx.cpu_type = "mips/24K";
op_model_mipsxx_ops.cpu_type = "mips/24K";
break;
case CPU_25KF:
op_model_mipsxx.cpu_type = "mips/25K";
op_model_mipsxx_ops.cpu_type = "mips/25K";
break;
#ifndef CONFIG_SMP
case CPU_34K:
op_model_mipsxx.cpu_type = "mips/34K";
op_model_mipsxx_ops.cpu_type = "mips/34K";
break;
case CPU_74K:
op_model_mipsxx_ops.cpu_type = "mips/74K";
break;
#endif
case CPU_5KC:
op_model_mipsxx.cpu_type = "mips/5K";
op_model_mipsxx_ops.cpu_type = "mips/5K";
break;
case CPU_SB1:
case CPU_SB1A:
op_model_mipsxx.cpu_type = "mips/sb1";
op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
default:
@ -229,12 +233,12 @@ static int __init mipsxx_init(void)
static void mipsxx_exit(void)
{
reset_counters(op_model_mipsxx.num_counters);
reset_counters(op_model_mipsxx_ops.num_counters);
perf_irq = null_perf_irq;
}
struct op_mips_model op_model_mipsxx = {
struct op_mips_model op_model_mipsxx_ops = {
.reg_setup = mipsxx_reg_setup,
.cpu_setup = mipsxx_cpu_setup,
.init = mipsxx_init,

Просмотреть файл

@ -126,7 +126,7 @@ static void rm9000_exit(void)
free_irq(rm9000_perfcount_irq, NULL);
}
struct op_mips_model op_model_rm9000 = {
struct op_mips_model op_model_rm9000_ops = {
.reg_setup = rm9000_reg_setup,
.cpu_setup = rm9000_cpu_setup,
.init = rm9000_init,

Просмотреть файл

@ -31,12 +31,12 @@
/* issue a PIO read to make sure no PIO writes are pending */
static void inline flush_crime_bus(void)
{
volatile unsigned long junk = crime->control;
crime->control;
}
static void inline flush_mace_bus(void)
{
volatile unsigned long junk = mace->perif.ctrl.misc;
mace->perif.ctrl.misc;
}
#undef DEBUG_IRQ

Просмотреть файл

@ -1157,6 +1157,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
/* some quirks for platform function decoding */
enum {
pmac_i2c_quirk_invmask = 0x00000001u,
pmac_i2c_quirk_skip = 0x00000002u,
};
static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
@ -1172,6 +1173,15 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
/* XXX Study device-tree's & apple drivers are get the quirks
* right !
*/
/* Workaround: It seems that running the clockspreading
* properties on the eMac will cause lockups during boot.
* The machine seems to work fine without that. So for now,
* let's make sure i2c-hwclock doesn't match about "imic"
* clocks and we'll figure out if we really need to do
* something special about those later.
*/
{ "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
{ "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
{ "i2c-cpu-voltage", NULL, 0},
{ "temp-monitor", NULL, 0 },
@ -1198,6 +1208,8 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
if (p->compatible &&
!device_is_compatible(np, p->compatible))
continue;
if (p->quirks & pmac_i2c_quirk_skip)
break;
callback(np, p->quirks);
break;
}

Просмотреть файл

@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <asm/semaphore.h>
#include <asm/prom.h>
@ -546,6 +547,7 @@ struct pmf_device {
static LIST_HEAD(pmf_devices);
static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED;
static DEFINE_MUTEX(pmf_irq_mutex);
static void pmf_release_device(struct kref *kref)
{
@ -864,15 +866,17 @@ int pmf_register_irq_client(struct device_node *target,
spin_lock_irqsave(&pmf_lock, flags);
func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN);
if (func == NULL) {
spin_unlock_irqrestore(&pmf_lock, flags);
if (func)
func = pmf_get_function(func);
spin_unlock_irqrestore(&pmf_lock, flags);
if (func == NULL)
return -ENODEV;
}
mutex_lock(&pmf_irq_mutex);
if (list_empty(&func->irq_clients))
func->dev->handlers->irq_enable(func);
list_add(&client->link, &func->irq_clients);
client->func = func;
spin_unlock_irqrestore(&pmf_lock, flags);
mutex_unlock(&pmf_irq_mutex);
return 0;
}
@ -881,16 +885,16 @@ EXPORT_SYMBOL_GPL(pmf_register_irq_client);
void pmf_unregister_irq_client(struct pmf_irq_client *client)
{
struct pmf_function *func = client->func;
unsigned long flags;
BUG_ON(func == NULL);
spin_lock_irqsave(&pmf_lock, flags);
mutex_lock(&pmf_irq_mutex);
client->func = NULL;
list_del(&client->link);
if (list_empty(&func->irq_clients))
func->dev->handlers->irq_disable(func);
spin_unlock_irqrestore(&pmf_lock, flags);
mutex_unlock(&pmf_irq_mutex);
pmf_put_function(func);
}
EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);

Просмотреть файл

@ -10,6 +10,7 @@
#include <linux/config.h>
#include <linux/version.h>
#include <linux/errno.h>
#include <linux/threads.h>
#include <asm/thread_info.h>
#include <asm/asi.h>
#include <asm/pstate.h>
@ -493,6 +494,35 @@ tlb_fixup_done:
call prom_init
mov %l7, %o0 ! OpenPROM cif handler
/* Initialize current_thread_info()->cpu as early as possible.
* In order to do that accurately we have to patch up the get_cpuid()
* assembler sequences. And that, in turn, requires that we know
* if we are on a Starfire box or not. While we're here, patch up
* the sun4v sequences as well.
*/
call check_if_starfire
nop
call per_cpu_patch
nop
call sun4v_patch
nop
#ifdef CONFIG_SMP
call hard_smp_processor_id
nop
cmp %o0, NR_CPUS
blu,pt %xcc, 1f
nop
call boot_cpu_id_too_large
nop
/* Not reached... */
1:
#else
mov 0, %o0
#endif
stb %o0, [%g6 + TI_CPU]
/* Off we go.... */
call start_kernel
nop

Просмотреть файл

@ -220,7 +220,7 @@ char reboot_command[COMMAND_LINE_SIZE];
static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };
static void __init per_cpu_patch(void)
void __init per_cpu_patch(void)
{
struct cpuid_patch_entry *p;
unsigned long ver;
@ -280,7 +280,7 @@ static void __init per_cpu_patch(void)
}
}
static void __init sun4v_patch(void)
void __init sun4v_patch(void)
{
struct sun4v_1insn_patch_entry *p1;
struct sun4v_2insn_patch_entry *p2;
@ -315,6 +315,15 @@ static void __init sun4v_patch(void)
}
}
#ifdef CONFIG_SMP
void __init boot_cpu_id_too_large(int cpu)
{
prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
cpu, NR_CPUS);
prom_halt();
}
#endif
void __init setup_arch(char **cmdline_p)
{
/* Initialize PROM console and command line. */
@ -332,16 +341,6 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &prom_con;
#endif
/* Work out if we are starfire early on */
check_if_starfire();
/* Now we know enough to patch the get_cpuid sequences
* used by trap code.
*/
per_cpu_patch();
sun4v_patch();
boot_flags_init(*cmdline_p);
idprom_init();

Просмотреть файл

@ -1264,7 +1264,6 @@ void __init smp_tick_init(void)
boot_cpu_id = hard_smp_processor_id();
current_tick_offset = timer_tick_offset;
cpu_set(boot_cpu_id, cpu_online_map);
prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
}
@ -1345,18 +1344,6 @@ void __init smp_setup_cpu_possible_map(void)
void __devinit smp_prepare_boot_cpu(void)
{
int cpu = hard_smp_processor_id();
if (cpu >= NR_CPUS) {
prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
prom_halt();
}
current_thread_info()->cpu = cpu;
__local_per_cpu_offset = __per_cpu_offset(cpu);
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), phys_cpu_present_map);
}
int __devinit __cpu_up(unsigned int cpu)
@ -1433,4 +1420,7 @@ void __init setup_per_cpu_areas(void)
for (i = 0; i < NR_CPUS; i++, ptr += size)
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
/* Setup %g5 for the boot cpu. */
__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
}

Просмотреть файл

@ -165,8 +165,9 @@ csum_partial_end_cruft:
sll %g1, 8, %g1
or %o5, %g1, %o4
1: add %o2, %o4, %o2
1: addcc %o2, %o4, %o2
addc %g0, %o2, %o2
csum_partial_finish:
retl
mov %o2, %o0
srl %o2, 0, %o0

Просмотреть файл

@ -221,11 +221,12 @@ FUNC_NAME: /* %o0=src, %o1=dst, %o2=len, %o3=sum */
sll %g1, 8, %g1
or %o5, %g1, %o4
1: add %o3, %o4, %o3
1: addcc %o3, %o4, %o3
addc %g0, %o3, %o3
70:
retl
mov %o3, %o0
srl %o3, 0, %o0
95: mov 0, GLOBAL_SPARE
brlez,pn %o2, 4f

Просмотреть файл

@ -33,5 +33,9 @@ include $(srctree)/arch/i386/Makefile.cpu
# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
# Prevent sprintf in nfsd from being converted to strcpy and resulting in
# an unresolved reference.
cflags-y += -ffreestanding
CFLAGS += $(cflags-y)
USER_CFLAGS += $(cflags-y)

Просмотреть файл

@ -120,20 +120,11 @@ extern int is_syscall(unsigned long addr);
extern void free_irq(unsigned int, void *);
extern int cpu(void);
extern void time_init_kern(void);
/* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */
extern int __cant_sleep(void);
extern void segv_handler(int sig, union uml_pt_regs *regs);
extern void sigio_handler(int sig, union uml_pt_regs *regs);
#endif
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-file-style: "linux"
* End:
*/

Просмотреть файл

@ -84,6 +84,16 @@ void timer_irq(union uml_pt_regs *regs)
}
}
void time_init_kern(void)
{
unsigned long long nsecs;
nsecs = os_nsecs();
set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
-nsecs % BILLION);
}
void do_boot_timer_handler(struct sigcontext * sc)
{
struct pt_regs regs;

Просмотреть файл

@ -59,7 +59,7 @@ static __init void do_uml_initcalls(void)
initcall_t *call;
call = &__uml_initcall_start;
while (call < &__uml_initcall_end){;
while (call < &__uml_initcall_end){
(*call)();
call++;
}

Просмотреть файл

@ -81,20 +81,12 @@ void uml_idle_timer(void)
set_interval(ITIMER_REAL);
}
extern void ktime_get_ts(struct timespec *ts);
#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
void time_init(void)
{
struct timespec now;
if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR)
panic("Couldn't set SIGVTALRM handler");
set_interval(ITIMER_VIRTUAL);
do_posix_clock_monotonic_gettime(&now);
wall_to_monotonic.tv_sec = -now.tv_sec;
wall_to_monotonic.tv_nsec = -now.tv_nsec;
time_init_kern();
}
unsigned long long os_nsecs(void)

Просмотреть файл

@ -99,11 +99,12 @@ long sys_ipc (uint call, int first, int second,
switch (call) {
case SEMOP:
return sys_semtimedop(first, (struct sembuf *) ptr, second,
NULL);
return sys_semtimedop(first, (struct sembuf __user *) ptr,
second, NULL);
case SEMTIMEDOP:
return sys_semtimedop(first, (struct sembuf *) ptr, second,
(const struct timespec *) fifth);
return sys_semtimedop(first, (struct sembuf __user *) ptr,
second,
(const struct timespec __user *) fifth);
case SEMGET:
return sys_semget (first, second, third);
case SEMCTL: {

Просмотреть файл

@ -21,7 +21,7 @@
#include "skas.h"
static int copy_sc_from_user_skas(struct pt_regs *regs,
struct sigcontext *from)
struct sigcontext __user *from)
{
int err = 0;
@ -54,7 +54,8 @@ static int copy_sc_from_user_skas(struct pt_regs *regs,
return(err);
}
int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
int copy_sc_to_user_skas(struct sigcontext __user *to,
struct _fpstate __user *to_fp,
struct pt_regs *regs, unsigned long mask,
unsigned long sp)
{
@ -106,10 +107,11 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
#endif
#ifdef CONFIG_MODE_TT
int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
int fpsize)
{
struct _fpstate *to_fp, *from_fp;
struct _fpstate *to_fp;
struct _fpstate __user *from_fp;
unsigned long sigs;
int err;
@ -124,13 +126,14 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
return(err);
}
int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp,
struct sigcontext *from, int fpsize, unsigned long sp)
{
struct _fpstate *to_fp, *from_fp;
struct _fpstate __user *to_fp;
struct _fpstate *from_fp;
int err;
to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1));
from_fp = from->fpstate;
err = copy_to_user(to, from, sizeof(*to));
/* The SP in the sigcontext is the updated one for the signal
@ -158,7 +161,8 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from)
return(ret);
}
static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
static int copy_sc_to_user(struct sigcontext __user *to,
struct _fpstate __user *fp,
struct pt_regs *from, unsigned long mask,
unsigned long sp)
{
@ -169,7 +173,7 @@ static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
struct rt_sigframe
{
char *pretcode;
char __user *pretcode;
struct ucontext uc;
struct siginfo info;
};
@ -188,7 +192,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig,
frame = (struct rt_sigframe __user *)
round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8;
frame = (struct rt_sigframe *) ((unsigned long) frame - 128);
frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128);
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto out;

Просмотреть файл

@ -45,7 +45,7 @@ static long arch_prctl_tt(int code, unsigned long addr)
case ARCH_GET_GS:
ret = arch_prctl(code, (unsigned long) &tmp);
if(!ret)
ret = put_user(tmp, &addr);
ret = put_user(tmp, (long __user *)addr);
break;
default:
ret = -EINVAL;

Просмотреть файл

@ -133,6 +133,7 @@ struct cfq_data {
mempool_t *crq_pool;
int rq_in_driver;
int hw_tag;
/*
* schedule slice state info
@ -500,10 +501,13 @@ static void cfq_resort_rr_list(struct cfq_queue *cfqq, int preempted)
/*
* if queue was preempted, just add to front to be fair. busy_rr
* isn't sorted.
* isn't sorted, but insert at the back for fairness.
*/
if (preempted || list == &cfqd->busy_rr) {
list_add(&cfqq->cfq_list, list);
if (preempted)
list = list->prev;
list_add_tail(&cfqq->cfq_list, list);
return;
}
@ -664,6 +668,15 @@ static void cfq_activate_request(request_queue_t *q, struct request *rq)
struct cfq_data *cfqd = q->elevator->elevator_data;
cfqd->rq_in_driver++;
/*
* If the depth is larger 1, it really could be queueing. But lets
* make the mark a little higher - idling could still be good for
* low queueing, and a low queueing number could also just indicate
* a SCSI mid layer like behaviour where limit+1 is often seen.
*/
if (!cfqd->hw_tag && cfqd->rq_in_driver > 4)
cfqd->hw_tag = 1;
}
static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
@ -878,6 +891,13 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
if (!list_empty(&cfqd->cur_rr) || cfq_get_next_prio_level(cfqd) != -1)
cfqq = list_entry_cfqq(cfqd->cur_rr.next);
/*
* If no new queues are available, check if the busy list has some
* before falling back to idle io.
*/
if (!cfqq && !list_empty(&cfqd->busy_rr))
cfqq = list_entry_cfqq(cfqd->busy_rr.next);
/*
* if we have idle queues and no rt or be queues had pending
* requests, either allow immediate service if the grace period
@ -1458,7 +1478,8 @@ retry:
* set ->slice_left to allow preemption for a new process
*/
cfqq->slice_left = 2 * cfqd->cfq_slice_idle;
cfq_mark_cfqq_idle_window(cfqq);
if (!cfqd->hw_tag)
cfq_mark_cfqq_idle_window(cfqq);
cfq_mark_cfqq_prio_changed(cfqq);
cfq_init_prio_data(cfqq);
}
@ -1649,7 +1670,7 @@ cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq,
{
int enable_idle = cfq_cfqq_idle_window(cfqq);
if (!cic->ioc->task || !cfqd->cfq_slice_idle)
if (!cic->ioc->task || !cfqd->cfq_slice_idle || cfqd->hw_tag)
enable_idle = 0;
else if (sample_valid(cic->ttime_samples)) {
if (cic->ttime_mean > cfqd->cfq_slice_idle)
@ -1740,14 +1761,24 @@ cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);
cic = crq->io_context;
/*
* we never wait for an async request and we don't allow preemption
* of an async request. so just return early
*/
if (!cfq_crq_is_sync(crq))
if (!cfq_crq_is_sync(crq)) {
/*
* sync process issued an async request, if it's waiting
* then expire it and kick rq handling.
*/
if (cic == cfqd->active_cic &&
del_timer(&cfqd->idle_slice_timer)) {
cfq_slice_expired(cfqd, 0);
cfq_start_queueing(cfqd, cfqq);
}
return;
cic = crq->io_context;
}
cfq_update_io_thinktime(cfqd, cic);
cfq_update_io_seektime(cfqd, cic, crq);
@ -2165,10 +2196,9 @@ static void cfq_idle_class_timer(unsigned long data)
* race with a non-idle queue, reset timer
*/
end = cfqd->last_end_request + CFQ_IDLE_GRACE;
if (!time_after_eq(jiffies, end)) {
cfqd->idle_class_timer.expires = end;
add_timer(&cfqd->idle_class_timer);
} else
if (!time_after_eq(jiffies, end))
mod_timer(&cfqd->idle_class_timer, end);
else
cfq_schedule_dispatch(cfqd);
spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);

Просмотреть файл

@ -8,7 +8,6 @@
*
*/
#include <linux/vt_kern.h>
#include <linux/device.h>
#include <linux/kallsyms.h>
#include <linux/pm.h>
@ -66,6 +65,7 @@ int suspend_device(struct device * dev, pm_message_t state)
return error;
}
/**
* device_suspend - Save state and stop all devices in system.
* @state: Power state to put each device in.
@ -85,9 +85,6 @@ int device_suspend(pm_message_t state)
{
int error = 0;
if (!is_console_suspend_safe())
return -EINVAL;
down(&dpm_sem);
down(&dpm_list_sem);
while (!list_empty(&dpm_active) && error == 0) {

Просмотреть файл

@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *io, unsigned int offset,
static void port_cleanup(struct smi_info *info)
{
unsigned int addr = info->io.addr_data;
int mapsize;
int idx;
if (addr) {
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
release_region (addr, mapsize);
for (idx = 0; idx < info->io_size; idx++) {
release_region(addr + idx * info->io.regspacing,
info->io.regsize);
}
}
}
static int port_setup(struct smi_info *info)
{
unsigned int addr = info->io.addr_data;
int mapsize;
int idx;
if (!addr)
return -ENODEV;
@ -1225,16 +1225,22 @@ static int port_setup(struct smi_info *info)
return -EINVAL;
}
/* Calculate the total amount of memory to claim. This is an
* unusual looking calculation, but it avoids claiming any
* more memory than it has to. It will claim everything
* between the first address to the end of the last full
* register. */
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
return -EIO;
/* Some BIOSes reserve disjoint I/O regions in their ACPI
* tables. This causes problems when trying to register the
* entire I/O region. Therefore we must register each I/O
* port separately.
*/
for (idx = 0; idx < info->io_size; idx++) {
if (request_region(addr + idx * info->io.regspacing,
info->io.regsize, DEVICE_NAME) == NULL) {
/* Undo allocations */
while (idx--) {
release_region(addr + idx * info->io.regspacing,
info->io.regsize);
}
return -EIO;
}
}
return 0;
}

Просмотреть файл

@ -149,7 +149,7 @@ struct cm4000_dev {
#define ZERO_DEV(dev) \
memset(&dev->atr_csum,0, \
sizeof(struct cm4000_dev) - \
/*link*/ sizeof(struct pcmcia_device) - \
/*link*/ sizeof(struct pcmcia_device *) - \
/*node*/ sizeof(dev_node_t) - \
/*atr*/ MAX_ATR*sizeof(char) - \
/*rbuf*/ 512*sizeof(char) - \

Просмотреть файл

@ -105,6 +105,12 @@ static const char* tcpa_event_type_strings[] = {
"Non-Host Info"
};
struct tcpa_pc_event {
u32 event_id;
u32 event_size;
u8 event_data[0];
};
enum tcpa_pc_event_ids {
SMBIOS = 1,
BIS_CERT,
@ -114,14 +120,15 @@ enum tcpa_pc_event_ids {
NVRAM,
OPTION_ROM_EXEC,
OPTION_ROM_CONFIG,
OPTION_ROM_MICROCODE,
OPTION_ROM_MICROCODE = 10,
S_CRTM_VERSION,
S_CRTM_CONTENTS,
POST_CONTENTS,
HOST_TABLE_OF_DEVICES,
};
static const char* tcpa_pc_event_id_strings[] = {
""
"",
"SMBIOS",
"BIS Certificate",
"POST BIOS ",
@ -130,11 +137,12 @@ static const char* tcpa_pc_event_id_strings[] = {
"NVRAM",
"Option ROM",
"Option ROM config",
"Option ROM microcode",
"",
"Option ROM microcode ",
"S-CRTM Version",
"S-CRTM Contents",
"S-CRTM POST Contents",
"POST Contents",
"S-CRTM Contents ",
"POST Contents ",
"Table of Devices",
};
/* returns pointer to start of pos. entry of tcg log */
@ -206,7 +214,7 @@ static int get_event_name(char *dest, struct tcpa_event *event,
const char *name = "";
char data[40] = "";
int i, n_len = 0, d_len = 0;
u32 event_id;
struct tcpa_pc_event *pc_event;
switch(event->event_type) {
case PREBOOT:
@ -235,31 +243,32 @@ static int get_event_name(char *dest, struct tcpa_event *event,
}
break;
case EVENT_TAG:
event_id = be32_to_cpu(*((u32 *)event_entry));
pc_event = (struct tcpa_pc_event *)event_entry;
/* ToDo Row data -> Base64 */
switch (event_id) {
switch (pc_event->event_id) {
case SMBIOS:
case BIS_CERT:
case CMOS:
case NVRAM:
case OPTION_ROM_EXEC:
case OPTION_ROM_CONFIG:
case OPTION_ROM_MICROCODE:
case S_CRTM_VERSION:
case S_CRTM_CONTENTS:
case POST_CONTENTS:
name = tcpa_pc_event_id_strings[event_id];
name = tcpa_pc_event_id_strings[pc_event->event_id];
n_len = strlen(name);
break;
/* hash data */
case POST_BIOS_ROM:
case ESCD:
name = tcpa_pc_event_id_strings[event_id];
case OPTION_ROM_MICROCODE:
case S_CRTM_CONTENTS:
case POST_CONTENTS:
name = tcpa_pc_event_id_strings[pc_event->event_id];
n_len = strlen(name);
for (i = 0; i < 20; i++)
d_len += sprintf(data, "%02x",
event_entry[8 + i]);
d_len += sprintf(&data[2*i], "%02x",
pc_event->event_data[i]);
break;
default:
break;
@ -275,53 +284,13 @@ static int get_event_name(char *dest, struct tcpa_event *event,
static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
{
struct tcpa_event *event = v;
char *data = v;
int i;
char *eventname;
char data[4];
u32 help;
int i, len;
struct tcpa_event *event = (struct tcpa_event *) v;
unsigned char *event_entry =
(unsigned char *) (v + sizeof(struct tcpa_event));
eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
if (!eventname) {
printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
__func__);
return -ENOMEM;
}
/* 1st: PCR used is in little-endian format (4 bytes) */
help = le32_to_cpu(event->pcr_index);
memcpy(data, &help, 4);
for (i = 0; i < 4; i++)
for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
seq_putc(m, data[i]);
/* 2nd: SHA1 (20 bytes) */
for (i = 0; i < 20; i++)
seq_putc(m, event->pcr_value[i]);
/* 3rd: event type identifier (4 bytes) */
help = le32_to_cpu(event->event_type);
memcpy(data, &help, 4);
for (i = 0; i < 4; i++)
seq_putc(m, data[i]);
len = 0;
len += get_event_name(eventname, event, event_entry);
/* 4th: filename <= 255 + \'0' delimiter */
if (len > TCG_EVENT_NAME_LEN_MAX)
len = TCG_EVENT_NAME_LEN_MAX;
for (i = 0; i < len; i++)
seq_putc(m, eventname[i]);
/* 5th: delimiter */
seq_putc(m, '\0');
kfree(eventname);
return 0;
}

Просмотреть файл

@ -3238,14 +3238,6 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
}
}
int is_console_suspend_safe(void)
{
/* It is unsafe to suspend devices while X has control of the
* hardware. Make sure we are running on a kernel-controlled console.
*/
return vc_cons[fg_console].d->vc_mode == KD_TEXT;
}
/*
* Visible symbols for modules
*/

Просмотреть файл

@ -345,17 +345,17 @@ sgiioc4_resetproc(ide_drive_t * drive)
static u8
sgiioc4_INB(unsigned long port)
{
u8 reg = (u8) inb(port);
u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
if (reg & 0x51) { /* Not busy...check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) inl(other_ir);
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
outl(0x03, other_ir);
intr_reg = (u32) inl(other_ir);
writel(0x03, (void __iomem *) other_ir);
intr_reg = (u32) readl((void __iomem *) other_ir);
}
}
}
@ -606,6 +606,12 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
/*
* The IOC4 uses MMIO rather than Port IO.
* It also needs special workarounds for INB.
*/
default_hwif_mmiops(hwif);
hwif->INB = &sgiioc4_INB;
}
@ -743,6 +749,6 @@ ioc4_ide_exit(void)
module_init(ioc4_ide_init);
module_exit(ioc4_ide_exit);
MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");

Просмотреть файл

@ -845,7 +845,7 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
0x010000000000ULL, CSR1212_ALL_SPACE_END);
if (!scsi_id->status_fifo_addr) {
if (scsi_id->status_fifo_addr == ~0ULL) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}

Просмотреть файл

@ -275,6 +275,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev,
spin_lock_irqsave(&priv->tx_lock, flags);
++priv->tx_tail;
if (netif_queue_stopped(dev) &&
test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) &&
priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1)
netif_wake_queue(dev);
spin_unlock_irqrestore(&priv->tx_lock, flags);

Просмотреть файл

@ -167,6 +167,15 @@ void md_new_event(mddev_t *mddev)
}
EXPORT_SYMBOL_GPL(md_new_event);
/* Alternate version that can be called from interrupts
* when calling sysfs_notify isn't needed.
*/
void md_new_event_inintr(mddev_t *mddev)
{
atomic_inc(&md_event_count);
wake_up(&md_event_waiters);
}
/*
* Enables to iterate over all existing md arrays
* all_mddevs_lock protects this list.
@ -4149,7 +4158,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
md_new_event(mddev);
md_new_event_inintr(mddev);
}
/* seq_file implementation /proc/mdstat */

Просмотреть файл

@ -1605,6 +1605,21 @@ mpt_resume(struct pci_dev *pdev)
}
#endif
static int
mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
{
if ((MptDriverClass[index] == MPTSPI_DRIVER &&
ioc->bus_type != SPI) ||
(MptDriverClass[index] == MPTFC_DRIVER &&
ioc->bus_type != FC) ||
(MptDriverClass[index] == MPTSAS_DRIVER &&
ioc->bus_type != SAS))
/* make sure we only call the relevant reset handler
* for the bus */
return 0;
return (MptResetHandlers[index])(ioc, reset_phase);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_do_ioc_recovery - Initialize or recover MPT adapter.
@ -1885,14 +1900,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((ret == 0) && MptResetHandlers[ii]) {
dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
ioc->name, ii));
rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET);
handlers++;
}
if (alt_ioc_ready && MptResetHandlers[ii]) {
drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET);
handlers++;
}
}
@ -3267,11 +3282,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
if (MptResetHandlers[ii]) {
dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
ioc->name, ii));
r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET);
if (ioc->alt_ioc) {
dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET);
}
}
}
@ -5706,11 +5721,11 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
if (MptResetHandlers[ii]) {
dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
ioc->name, ii));
r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET);
if (ioc->alt_ioc) {
dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
}
}
}

Просмотреть файл

@ -84,7 +84,7 @@ config MMC_WBSD
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
depends on SOC_AU1X00 && MMC
depends on MMC && SOC_AU1200
help
This selects the AMD Alchemy(R) Multimedia card interface.
If you have a Alchemy platform with a MMC slot, say Y or M here.

Просмотреть файл

@ -2615,6 +2615,18 @@ static int nv_nway_reset(struct net_device *dev)
return ret;
}
#ifdef NETIF_F_TSO
static int nv_set_tso(struct net_device *dev, u32 value)
{
struct fe_priv *np = netdev_priv(dev);
if ((np->driver_data & DEV_HAS_CHECKSUM))
return ethtool_op_set_tso(dev, value);
else
return value ? -EOPNOTSUPP : 0;
}
#endif
static struct ethtool_ops ops = {
.get_drvinfo = nv_get_drvinfo,
.get_link = ethtool_op_get_link,
@ -2626,6 +2638,10 @@ static struct ethtool_ops ops = {
.get_regs = nv_get_regs,
.nway_reset = nv_nway_reset,
.get_perm_addr = ethtool_op_get_perm_addr,
#ifdef NETIF_F_TSO
.get_tso = ethtool_op_get_tso,
.set_tso = nv_set_tso
#endif
};
static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)

Просмотреть файл

@ -107,7 +107,7 @@ static int init_netconsole(void)
if(!configured) {
printk("netconsole: not configured, aborting\n");
return -EINVAL;
return 0;
}
if(netpoll_setup(&np))

Просмотреть файл

@ -1204,7 +1204,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt)
dev->last_rx = jiffies;
lp->linux_stats.rx_packets++;
lp->linux_stats.rx_bytes += skb->len;
lp->linux_stats.rx_bytes += pkt_len;
outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
continue;
} else {

Просмотреть файл

@ -861,6 +861,9 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb)
* give dev_queue_xmit something it can free.
*/
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2 == NULL)
goto abort;
}
ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr));

Просмотреть файл

@ -1143,6 +1143,12 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
{
struct pcmcia_socket *s = pcmcia_get_socket(skt);
if (!s) {
printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \
"failed, event 0x%x lost!\n", skt, event);
return -ENODEV;
}
ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n",
event, priority, skt);

Просмотреть файл

@ -48,33 +48,33 @@ static int m48t86_rtc_read_time(struct device *dev, struct rtc_time *tm)
struct platform_device *pdev = to_platform_device(dev);
struct m48t86_ops *ops = pdev->dev.platform_data;
reg = ops->readb(M48T86_REG_B);
reg = ops->readbyte(M48T86_REG_B);
if (reg & M48T86_REG_B_DM) {
/* data (binary) mode */
tm->tm_sec = ops->readb(M48T86_REG_SEC);
tm->tm_min = ops->readb(M48T86_REG_MIN);
tm->tm_hour = ops->readb(M48T86_REG_HOUR) & 0x3F;
tm->tm_mday = ops->readb(M48T86_REG_DOM);
tm->tm_sec = ops->readbyte(M48T86_REG_SEC);
tm->tm_min = ops->readbyte(M48T86_REG_MIN);
tm->tm_hour = ops->readbyte(M48T86_REG_HOUR) & 0x3F;
tm->tm_mday = ops->readbyte(M48T86_REG_DOM);
/* tm_mon is 0-11 */
tm->tm_mon = ops->readb(M48T86_REG_MONTH) - 1;
tm->tm_year = ops->readb(M48T86_REG_YEAR) + 100;
tm->tm_wday = ops->readb(M48T86_REG_DOW);
tm->tm_mon = ops->readbyte(M48T86_REG_MONTH) - 1;
tm->tm_year = ops->readbyte(M48T86_REG_YEAR) + 100;
tm->tm_wday = ops->readbyte(M48T86_REG_DOW);
} else {
/* bcd mode */
tm->tm_sec = BCD2BIN(ops->readb(M48T86_REG_SEC));
tm->tm_min = BCD2BIN(ops->readb(M48T86_REG_MIN));
tm->tm_hour = BCD2BIN(ops->readb(M48T86_REG_HOUR) & 0x3F);
tm->tm_mday = BCD2BIN(ops->readb(M48T86_REG_DOM));
tm->tm_sec = BCD2BIN(ops->readbyte(M48T86_REG_SEC));
tm->tm_min = BCD2BIN(ops->readbyte(M48T86_REG_MIN));
tm->tm_hour = BCD2BIN(ops->readbyte(M48T86_REG_HOUR) & 0x3F);
tm->tm_mday = BCD2BIN(ops->readbyte(M48T86_REG_DOM));
/* tm_mon is 0-11 */
tm->tm_mon = BCD2BIN(ops->readb(M48T86_REG_MONTH)) - 1;
tm->tm_year = BCD2BIN(ops->readb(M48T86_REG_YEAR)) + 100;
tm->tm_wday = BCD2BIN(ops->readb(M48T86_REG_DOW));
tm->tm_mon = BCD2BIN(ops->readbyte(M48T86_REG_MONTH)) - 1;
tm->tm_year = BCD2BIN(ops->readbyte(M48T86_REG_YEAR)) + 100;
tm->tm_wday = BCD2BIN(ops->readbyte(M48T86_REG_DOW));
}
/* correct the hour if the clock is in 12h mode */
if (!(reg & M48T86_REG_B_H24))
if (ops->readb(M48T86_REG_HOUR) & 0x80)
if (ops->readbyte(M48T86_REG_HOUR) & 0x80)
tm->tm_hour += 12;
return 0;
@ -86,35 +86,35 @@ static int m48t86_rtc_set_time(struct device *dev, struct rtc_time *tm)
struct platform_device *pdev = to_platform_device(dev);
struct m48t86_ops *ops = pdev->dev.platform_data;
reg = ops->readb(M48T86_REG_B);
reg = ops->readbyte(M48T86_REG_B);
/* update flag and 24h mode */
reg |= M48T86_REG_B_SET | M48T86_REG_B_H24;
ops->writeb(reg, M48T86_REG_B);
ops->writebyte(reg, M48T86_REG_B);
if (reg & M48T86_REG_B_DM) {
/* data (binary) mode */
ops->writeb(tm->tm_sec, M48T86_REG_SEC);
ops->writeb(tm->tm_min, M48T86_REG_MIN);
ops->writeb(tm->tm_hour, M48T86_REG_HOUR);
ops->writeb(tm->tm_mday, M48T86_REG_DOM);
ops->writeb(tm->tm_mon + 1, M48T86_REG_MONTH);
ops->writeb(tm->tm_year % 100, M48T86_REG_YEAR);
ops->writeb(tm->tm_wday, M48T86_REG_DOW);
ops->writebyte(tm->tm_sec, M48T86_REG_SEC);
ops->writebyte(tm->tm_min, M48T86_REG_MIN);
ops->writebyte(tm->tm_hour, M48T86_REG_HOUR);
ops->writebyte(tm->tm_mday, M48T86_REG_DOM);
ops->writebyte(tm->tm_mon + 1, M48T86_REG_MONTH);
ops->writebyte(tm->tm_year % 100, M48T86_REG_YEAR);
ops->writebyte(tm->tm_wday, M48T86_REG_DOW);
} else {
/* bcd mode */
ops->writeb(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
ops->writeb(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
ops->writeb(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
ops->writeb(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
ops->writeb(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
ops->writeb(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
ops->writeb(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
ops->writebyte(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
ops->writebyte(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
ops->writebyte(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
ops->writebyte(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
ops->writebyte(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
ops->writebyte(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
ops->writebyte(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
}
/* update ended */
reg &= ~M48T86_REG_B_SET;
ops->writeb(reg, M48T86_REG_B);
ops->writebyte(reg, M48T86_REG_B);
return 0;
}
@ -125,12 +125,12 @@ static int m48t86_rtc_proc(struct device *dev, struct seq_file *seq)
struct platform_device *pdev = to_platform_device(dev);
struct m48t86_ops *ops = pdev->dev.platform_data;
reg = ops->readb(M48T86_REG_B);
reg = ops->readbyte(M48T86_REG_B);
seq_printf(seq, "mode\t\t: %s\n",
(reg & M48T86_REG_B_DM) ? "binary" : "bcd");
reg = ops->readb(M48T86_REG_D);
reg = ops->readbyte(M48T86_REG_D);
seq_printf(seq, "battery\t\t: %s\n",
(reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
@ -157,7 +157,7 @@ static int __devinit m48t86_rtc_probe(struct platform_device *dev)
platform_set_drvdata(dev, rtc);
/* read battery status */
reg = ops->readb(M48T86_REG_D);
reg = ops->readbyte(M48T86_REG_D);
dev_info(&dev->dev, "battery %s\n",
(reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");

Просмотреть файл

@ -45,11 +45,11 @@ struct pgid {
union {
__u8 fc; /* SPID function code */
struct path_state ps; /* SNID path state */
} inf;
} __attribute__ ((packed)) inf;
union {
__u32 cpu_addr : 16; /* CPU address */
struct extended_cssid ext_cssid;
} pgid_high;
} __attribute__ ((packed)) pgid_high;
__u32 cpu_id : 24; /* CPU identification */
__u32 cpu_model : 16; /* CPU model */
__u32 tod_high; /* high word TOD clock */

Просмотреть файл

@ -749,7 +749,7 @@ ccw_device_irq(struct ccw_device *cdev, enum dev_event dev_event)
/* Unit check but no sense data. Need basic sense. */
if (ccw_device_do_sense(cdev, irb) != 0)
goto call_handler_unsol;
memcpy(irb, &cdev->private->irb, sizeof(struct irb));
memcpy(&cdev->private->irb, irb, sizeof(struct irb));
cdev->private->state = DEV_STATE_W4SENSE;
cdev->private->intparm = 0;
return;

Просмотреть файл

@ -982,6 +982,12 @@ static int device_check(ppa_struct *dev)
return -ENODEV;
}
static int ppa_adjust_queue(struct scsi_device *device)
{
blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
return 0;
}
static struct scsi_host_template ppa_template = {
.module = THIS_MODULE,
.proc_name = "ppa",
@ -997,6 +1003,7 @@ static struct scsi_host_template ppa_template = {
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
.can_queue = 1,
.slave_alloc = ppa_adjust_queue,
};
/***************************************************************************

Просмотреть файл

@ -454,7 +454,7 @@ static int sil24_softreset(struct ata_port *ap, int verbose,
*/
msleep(10);
prb->ctrl = PRB_CTRL_SRST;
prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
@ -551,9 +551,9 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
prb->ctrl = PRB_CTRL_PACKET_WRITE;
prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE);
else
prb->ctrl = PRB_CTRL_PACKET_READ;
prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ);
} else
prb->ctrl = 0;

Просмотреть файл

@ -165,6 +165,7 @@ static struct {
{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
{"HP", "C1557A", NULL, BLIST_FORCELUN},
{"HP", "C3323-300", "4269", BLIST_NOTQ},
{"HP", "C5713A", NULL, BLIST_NOREPORTLUN},
{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},

Просмотреть файл

@ -367,7 +367,7 @@ static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl,
int nsegs, unsigned bufflen, gfp_t gfp)
{
struct request_queue *q = rq->q;
int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned int data_len = 0, len, bytes, off;
struct page *page;
struct bio *bio = NULL;

Просмотреть файл

@ -955,7 +955,8 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
list_for_each_entry(rphy, &sas_host->rphy_list, list) {
struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
if (rphy->scsi_target_id == -1)
if (rphy->identify.device_type != SAS_END_DEVICE ||
rphy->scsi_target_id == -1)
continue;
if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
@ -977,7 +978,6 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
#define SETUP_TEMPLATE(attrb, field, perm, test) \
i->private_##attrb[count] = class_device_attr_##field; \
i->private_##attrb[count].attr.mode = perm; \
i->private_##attrb[count].store = NULL; \
i->attrb[count] = &i->private_##attrb[count]; \
if (test) \
count++

Просмотреть файл

@ -214,10 +214,13 @@ int au1100fb_setmode(struct au1100fb_device *fbdev)
*/
int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
{
struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
u32 *palette = fbdev->regs->lcd_pallettebase;
struct au1100fb_device *fbdev;
u32 *palette;
u32 value;
fbdev = to_au1100fb_device(fbi);
palette = fbdev->regs->lcd_pallettebase;
if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
return -EINVAL;
@ -316,9 +319,11 @@ int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
*/
int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
struct au1100fb_device *fbdev;
int dy;
fbdev = to_au1100fb_device(fbi);
print_dbg("fb_pan_display %p %p", var, fbi);
if (!var || !fbdev) {
@ -382,10 +387,12 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
*/
int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
{
struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
struct au1100fb_device *fbdev;
unsigned int len;
unsigned long start=0, off;
fbdev = to_au1100fb_device(fbi);
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
}
@ -467,7 +474,7 @@ int au1100fb_drv_probe(struct device *dev)
if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
DRIVER_NAME)) {
print_err("fail to lock memory region at 0x%08x",
print_err("fail to lock memory region at 0x%08lx",
au1100fb_fix.mmio_start);
return -EBUSY;
}
@ -595,13 +602,13 @@ int au1100fb_drv_remove(struct device *dev)
return 0;
}
int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
{
/* TODO */
return 0;
}
int au1100fb_drv_resume(struct device *dev, u32 level)
int au1100fb_drv_resume(struct device *dev)
{
/* TODO */
return 0;

Просмотреть файл

@ -2631,7 +2631,7 @@ static int fbcon_scrolldelta(struct vc_data *vc, int lines)
scr_memcpyw((u16 *) q, (u16 *) p,
vc->vc_size_row);
}
softback_in = p;
softback_in = softback_curr = p;
update_region(vc, vc->vc_origin,
logo_lines * vc->vc_cols);
}

Просмотреть файл

@ -55,7 +55,7 @@ static struct fb_var_screeninfo maxinefb_defined = {
};
static struct fb_fix_screeninfo maxinefb_fix = {
.id = "Maxine onboard graphics 1024x768x8",
.id = "Maxine",
.smem_len = (1024*768),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
@ -107,8 +107,6 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green,
static struct fb_ops maxinefb_ops = {
.owner = THIS_MODULE,
.fb_get_fix = gen_get_fix,
.fb_get_var = gen_get_var,
.fb_setcolreg = maxinefb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,

Просмотреть файл

@ -767,7 +767,6 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input)
if (input->group != sbi->s_groups_count) {
ext3_warning(sb, __FUNCTION__,
"multiple resizers run on filesystem!");
unlock_super(sb);
err = -EBUSY;
goto exit_journal;
}

Просмотреть файл

@ -1080,8 +1080,8 @@ static int fastcall do_path_lookup(int dfd, const char *name,
nd->flags = flags;
nd->depth = 0;
read_lock(&current->fs->lock);
if (*name=='/') {
read_lock(&current->fs->lock);
if (current->fs->altroot && !(nd->flags & LOOKUP_NOALT)) {
nd->mnt = mntget(current->fs->altrootmnt);
nd->dentry = dget(current->fs->altroot);
@ -1092,33 +1092,35 @@ static int fastcall do_path_lookup(int dfd, const char *name,
}
nd->mnt = mntget(current->fs->rootmnt);
nd->dentry = dget(current->fs->root);
read_unlock(&current->fs->lock);
} else if (dfd == AT_FDCWD) {
read_lock(&current->fs->lock);
nd->mnt = mntget(current->fs->pwdmnt);
nd->dentry = dget(current->fs->pwd);
read_unlock(&current->fs->lock);
} else {
struct dentry *dentry;
file = fget_light(dfd, &fput_needed);
retval = -EBADF;
if (!file)
goto unlock_fail;
goto out_fail;
dentry = file->f_dentry;
retval = -ENOTDIR;
if (!S_ISDIR(dentry->d_inode->i_mode))
goto fput_unlock_fail;
goto fput_fail;
retval = file_permission(file, MAY_EXEC);
if (retval)
goto fput_unlock_fail;
goto fput_fail;
nd->mnt = mntget(file->f_vfsmnt);
nd->dentry = dget(dentry);
fput_light(file, fput_needed);
}
read_unlock(&current->fs->lock);
current->total_link_count = 0;
retval = link_path_walk(name, nd);
out:
@ -1127,13 +1129,12 @@ out:
nd->dentry->d_inode))
audit_inode(name, nd->dentry->d_inode, flags);
}
out_fail:
return retval;
fput_unlock_fail:
fput_fail:
fput_light(file, fput_needed);
unlock_fail:
read_unlock(&current->fs->lock);
return retval;
goto out_fail;
}
int fastcall path_lookup(const char *name, unsigned int flags,

Просмотреть файл

@ -45,10 +45,8 @@ extern struct cpuinfo_alpha cpu_data[NR_CPUS];
#define hard_smp_processor_id() __hard_smp_processor_id()
#define raw_smp_processor_id() (current_thread_info()->cpu)
extern cpumask_t cpu_present_mask;
extern cpumask_t cpu_online_map;
extern int smp_num_cpus;
#define cpu_possible_map cpu_present_mask
#define cpu_possible_map cpu_present_map
int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, cpumask_t cpu);

Просмотреть файл

@ -49,7 +49,7 @@ static inline int __ixp23xx_arch_is_coherent(void)
{
extern unsigned int processor_id;
if (((processor_id & 15) >= 2) || machine_is_roadrunner())
if (((processor_id & 15) >= 4) || machine_is_roadrunner())
return 1;
return 0;

Просмотреть файл

@ -28,7 +28,7 @@
#define UARTDR 0x00 /* Tx/Rx data */
#define RXSTAT 0x04 /* Rx status */
#define H_UBRLCR 0x08 /* mode register high */
#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
#define UARTCON 0x14 /* control register */
#define UARTFLG 0x18 /* flag register */

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше