microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 into next/cleanup 

* 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6:
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file

(update to v3.3-rc7)

Conflicts:
	arch/arm/mach-s3c2440/common.h
This commit is contained in:
Arnd Bergmann 2012-03-15 15:19:05 +00:00
Родитель e3643b77de a6de3df4f1
Коммит f4e2467bad
246 изменённых файлов: 1570 добавлений и 1025 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

6
Documentation/devicetree/bindings/gpio/led.txt
Просмотреть файл

@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each
node's name represents the name of the corresponding LED.
LED sub-node properties:
- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
for devices" in Documentation/devicetree/booting-without-of.txt. Active
low LEDs should be indicated using flags in the GPIO specifier.
- gpios : Should specify the LED's GPIO, see "gpios property" in
Documentation/devicetree/gpio.txt. Active low LEDs should be
indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
- linux,default-trigger : (optional) This parameter, if present, is a

1
Documentation/devicetree/bindings/vendor-prefixes.txt
Просмотреть файл

@ -30,6 +30,7 @@ national National Semiconductor
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
picochip Picochip Ltd
powervr Imagination Technologies
qcom Qualcomm, Inc.
ramtron Ramtron International

26
Documentation/hwmon/jc42
Просмотреть файл

@ -7,21 +7,29 @@ Supported chips:
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
* IDT TSE2002B3, TS3000B3
Prefix: 'tse2002b3', 'ts3000b3'
* Atmel AT30TS00
Prefix: 'at30ts00'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.idt.com/products/getdoc.cfm?docid=18715691
http://www.idt.com/products/getdoc.cfm?docid=18715692
http://www.atmel.com/Images/doc8585.pdf
* IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
Prefix: 'tse2002', 'ts3000'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
* Maxim MAX6604
Prefix: 'max6604'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
* Microchip MCP9805, MCP98242, MCP98243, MCP9843
Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
* Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@ -48,6 +56,12 @@ Supported chips:
Datasheets:
http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
* ST Microelectronics STTS2002, STTS3000
Prefix: 'stts2002', 'stts3000'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f

3
Documentation/input/alps.txt
Просмотреть файл

@ -13,7 +13,8 @@ Detection
All ALPS touchpads should respond to the "E6 report" command sequence:
E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
00-00-64.
00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
if some buttons are pressed.
If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

6
Documentation/kernel-parameters.txt
Просмотреть файл

@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
default: off.
printk.always_kmsg_dump=
Trigger kmsg_dump for cases other than kernel oops or
panics
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
default: disabled
printk.time= Show timing data prefixed to each printk message line
Format: <bool> (1/Y/y=enable, 0/N/n=disable)

6
MAINTAINERS
Просмотреть файл

@ -962,7 +962,7 @@ F: drivers/tty/serial/msm_serial.c
F: drivers/platform/msm/
F: drivers/*/pm8???-*
F: include/linux/mfd/pm8xxx/
T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
@ -1310,7 +1310,7 @@ F: drivers/atm/
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
@ -1318,7 +1318,7 @@ S: Maintained
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Ludovic Desroches <ludovic.desroches@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION = -rc7
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

2
arch/alpha/include/asm/futex.h
Просмотреть файл

@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
" lda $31,3b-2b(%0)\n"
" .previous\n"
: "+r"(ret), "=&r"(prev), "=&r"(cmp)
: "r"(uaddr), "r"((long)oldval), "r"(newval)
: "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
: "memory");
*uval = prev;

2
arch/arm/Kconfig
Просмотреть файл

@ -1283,7 +1283,7 @@ config ARM_ERRATA_743622
depends on CPU_V7
help
This option enables the workaround for the 743622 Cortex-A9
(r2p0..r2p2) erratum. Under very rare conditions, a faulty
(r2p*) erratum. Under very rare conditions, a faulty
optimisation in the Cortex-A9 Store Buffer may lead to data
corruption. This workaround sets a specific bit in the diagnostic
register of the Cortex-A9 which disables the Store Buffer

1
arch/arm/boot/.gitignore поставляемый
Просмотреть файл

@ -3,3 +3,4 @@ zImage
xipImage
bootpImage
uImage
*.dtb

2
arch/arm/include/asm/pmu.h
Просмотреть файл

@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
u64 armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow);
int idx);
int armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,

3
arch/arm/kernel/Makefile
Просмотреть файл

@ -62,9 +62,6 @@ obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o
CFLAGS_swp_emulate.o := -Wa,-march=armv7-a
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o

1
arch/arm/kernel/ecard.c
Просмотреть файл

@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
vma.vm_flags = VM_EXEC;
vma.vm_mm = mm;
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

45
arch/arm/kernel/perf_event.c
Просмотреть файл

@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
int idx)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
@ -193,13 +193,7 @@ again:
new_raw_count) != prev_raw_count)
goto again;
new_raw_count &= armpmu->max_period;
prev_raw_count &= armpmu->max_period;
if (overflow)
delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
else
delta = new_raw_count - prev_raw_count;
delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
if (hwc->idx < 0)
return;
armpmu_event_update(event, hwc, hwc->idx, 0);
armpmu_event_update(event, hwc, hwc->idx);
}
static void
@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(hwc, hwc->idx);
barrier(); /* why? */
armpmu_event_update(event, hwc, hwc->idx, 0);
armpmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
/*
* For non-sampling runs, limit the sample_period to half
* of the counter width. That way, the new counter value
* is far less likely to overtake the previous one unless
* you have some serious IRQ latency issues.
*/
hwc->sample_period = armpmu->max_period >> 1;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
armpmu->type = ARM_PMU_DEVICE_CPU;
}
/*
* PMU hardware loses all context when a CPU goes offline.
* When a CPU is hotplugged back in, since some hardware registers are
* UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
* junk values out of them.
*/
static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
unsigned long action, void *hcpu)
{
if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
return NOTIFY_DONE;
if (cpu_pmu && cpu_pmu->reset)
cpu_pmu->reset(NULL);
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
.notifier_call = pmu_cpu_notify,
};
/*
* CPU PMU identification and registration.
*/
@ -730,6 +752,7 @@ init_hw_perf_events(void)
pr_info("enabled with %s PMU driver, %d counters available\n",
cpu_pmu->name, cpu_pmu->num_events);
cpu_pmu_init(cpu_pmu);
register_cpu_notifier(&pmu_cpu_notifier);
armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");

22
arch/arm/kernel/perf_event_v6.c
Просмотреть файл

@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int counter_is_active(unsigned long pmcr, int idx)
{
unsigned long mask = 0;
if (idx == ARMV6_CYCLE_COUNTER)
mask = ARMV6_PMCR_CCOUNT_IEN;
else if (idx == ARMV6_COUNTER0)
mask = ARMV6_PMCR_COUNT0_IEN;
else if (idx == ARMV6_COUNTER1)
mask = ARMV6_PMCR_COUNT1_IEN;
if (mask)
return pmcr & mask;
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
return 0;
}
static irqreturn_t
armv6pmu_handle_irq(int irq_num,
void *dev)
@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!counter_is_active(pmcr, idx))
/* Ignore if we don't have an event. */
if (!event)
continue;
/*
@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;

11
arch/arm/kernel/perf_event_v7.c
Просмотреть файл

@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
isb();
/* Clear the overflow flag in case an interrupt is pending. */
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
isb();
return idx;
}
@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
/* Ignore if we don't have an event. */
if (!event)
continue;
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;

20
arch/arm/kernel/perf_event_xscale.c
Просмотреть файл

@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!event)
continue;
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
if (!event)
continue;
if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
continue;
hwc = &event->hw;
armpmu_event_update(event, hwc, idx, 1);
armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
unsigned long flags, ien, evtsel, of_flags;
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
switch (idx) {
case XSCALE_CYCLE_COUNTER:
ien &= ~XSCALE2_CCOUNT_INT_EN;
of_flags = XSCALE2_CCOUNT_OVERFLOW;
break;
case XSCALE_COUNTER0:
ien &= ~XSCALE2_COUNT0_INT_EN;
evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
of_flags = XSCALE2_COUNT0_OVERFLOW;
break;
case XSCALE_COUNTER1:
ien &= ~XSCALE2_COUNT1_INT_EN;
evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
of_flags = XSCALE2_COUNT1_OVERFLOW;
break;
case XSCALE_COUNTER2:
ien &= ~XSCALE2_COUNT2_INT_EN;
evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
of_flags = XSCALE2_COUNT2_OVERFLOW;
break;
case XSCALE_COUNTER3:
ien &= ~XSCALE2_COUNT3_INT_EN;
evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
of_flags = XSCALE2_COUNT3_OVERFLOW;
break;
default:
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
xscale2pmu_write_overflow_flags(of_flags);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}

19
arch/arm/mach-at91/at91sam9g45_devices.c
Просмотреть файл

@ -38,10 +38,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 8,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.name = "at91sam9g45_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
#if defined(CONFIG_OF)
struct device_node *of_node =
of_find_node_by_name(NULL, "dma-controller");
if (of_node)
of_node_put(of_node);
else
#endif
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}

8
arch/arm/mach-at91/at91sam9rl_devices.c
Просмотреть файл

@ -33,10 +33,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 2,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DMA,
@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.name = "at91sam9rl_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else

3
arch/arm/mach-ep93xx/Makefile
Просмотреть файл

@ -8,6 +8,9 @@ obj- :=
obj-$(CONFIG_EP93XX_DMA) += dma.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o

1
arch/arm/mach-ep93xx/adssphere.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "soc.h"
static struct ep93xx_eth_data __initdata adssphere_eth_data = {
.phy_id = 1,

1
arch/arm/mach-ep93xx/clock.c
Просмотреть файл

@ -25,6 +25,7 @@
#include <asm/div64.h>
#include "soc.h"
struct clk {
struct clk *parent;

54
arch/arm/mach-ep93xx/core.c
Просмотреть файл

@ -46,6 +46,7 @@
#include <asm/hardware/vic.h>
#include "soc.h"
/*************************************************************************
* Static I/O mappings that are needed for all EP93xx platforms
@ -204,7 +205,6 @@ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
spin_unlock_irqrestore(&syscon_swlock, flags);
}
EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
{
@ -221,7 +221,6 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
spin_unlock_irqrestore(&syscon_swlock, flags);
}
EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
/**
* ep93xx_chip_revision() - returns the EP93xx chip revision
@ -648,9 +647,19 @@ static struct platform_device ep93xx_fb_device = {
.resource = ep93xx_fb_resource,
};
/* The backlight use a single register in the framebuffer's register space */
#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
static struct resource ep93xx_bl_resources[] = {
DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
};
static struct platform_device ep93xx_bl_device = {
.name = "ep93xx-bl",
.id = -1,
.num_resources = ARRAY_SIZE(ep93xx_bl_resources),
.resource = ep93xx_bl_resources,
};
/**
@ -783,23 +792,12 @@ void __init ep93xx_register_i2s(void)
#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
EP93XX_SYSCON_I2SCLKDIV_SPOL)
int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
int ep93xx_i2s_acquire(void)
{
unsigned val;
/* Sanity check */
if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
return -EINVAL;
if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
return -EINVAL;
/* Must have only one of I2SONSSP/I2SONAC97 set */
if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
(i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
return -EINVAL;
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
ep93xx_devcfg_set_bits(i2s_pins);
ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
EP93XX_SYSCON_DEVCFG_I2S_MASK);
/*
* This is potentially racy with the clock api for i2s_mclk, sclk and
@ -809,7 +807,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
*/
val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
val &= ~EP93XX_I2SCLKDIV_MASK;
val |= i2s_config;
val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
return 0;
@ -856,11 +854,32 @@ void __init ep93xx_register_ac97(void)
platform_device_register(&ep93xx_pcm_device);
}
/*************************************************************************
* EP93xx Watchdog
*************************************************************************/
static struct resource ep93xx_wdt_resources[] = {
DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
};
static struct platform_device ep93xx_wdt_device = {
.name = "ep93xx-wdt",
.id = -1,
.num_resources = ARRAY_SIZE(ep93xx_wdt_resources),
.resource = ep93xx_wdt_resources,
};
void __init ep93xx_init_devices(void)
{
/* Disallow access to MaverickCrunch initially */
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
/* Default all ports to GPIO */
ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
EP93XX_SYSCON_DEVCFG_GONK |
EP93XX_SYSCON_DEVCFG_EONIDE |
EP93XX_SYSCON_DEVCFG_GONIDE |
EP93XX_SYSCON_DEVCFG_HONIDE);
/* Get the GPIO working early, other devices need it */
platform_device_register(&ep93xx_gpio_device);
@ -871,6 +890,7 @@ void __init ep93xx_init_devices(void)
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
platform_device_register(&ep93xx_leds);
platform_device_register(&ep93xx_wdt_device);
}
void ep93xx_restart(char mode, const char *cmd)

0
arch/arm/kernel/crunch-bits.S → arch/arm/mach-ep93xx/crunch-bits.S
Просмотреть файл

4
arch/arm/kernel/crunch.c → arch/arm/mach-ep93xx/crunch.c
Просмотреть файл

@ -16,9 +16,11 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/ep93xx-regs.h>
#include <asm/thread_notify.h>
#include "soc.h"
struct crunch_state *crunch_owner;
void crunch_task_release(struct thread_info *thread)

2
arch/arm/mach-ep93xx/dma.c
Просмотреть файл

@ -28,6 +28,8 @@
#include <mach/dma.h>
#include <mach/hardware.h>
#include "soc.h"
#define DMA_CHANNEL(_name, _base, _irq) \
{ .name = (_name), .base = (_base), .irq = (_irq) }

1
arch/arm/mach-ep93xx/edb93xx.c
Просмотреть файл

@ -43,6 +43,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "soc.h"
static void __init edb93xx_register_flash(void)
{

1
arch/arm/mach-ep93xx/gesbc9312.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "soc.h"
static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
.phy_id = 1,

191
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
Просмотреть файл

@ -5,40 +5,6 @@
#ifndef __ASM_ARCH_EP93XX_REGS_H
#define __ASM_ARCH_EP93XX_REGS_H
/*
* EP93xx Physical Memory Map:
*
* The ASDO pin is sampled at system reset to select a synchronous or
* asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
* the synchronous boot mode is selected. When ASDO is "0" (i.e
* pulled-down) the asynchronous boot mode is selected.
*
* In synchronous boot mode nSDCE3 is decoded starting at physical address
* 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
* boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
* decoded at 0xf0000000.
*
* There is known errata for the EP93xx dealing with External Memory
* Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
* Guidelines" for more information. This document can be found at:
*
* http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
*/
#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
#define EP93XX_CS1_PHYS_BASE 0x10000000
#define EP93XX_CS2_PHYS_BASE 0x20000000
#define EP93XX_CS3_PHYS_BASE 0x30000000
#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
#define EP93XX_CS6_PHYS_BASE 0x60000000
#define EP93XX_CS7_PHYS_BASE 0x70000000
#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
/*
* EP93xx linux memory map:
*
@ -62,58 +28,7 @@
#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
/* AHB peripherals */
#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000)
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000)
#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
/* APB UARTs */
#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
@ -123,108 +38,4 @@
#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28)
#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27)
#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24)
#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20)
#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18)
#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84)
#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15)
#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14)
#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13)
#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c)
#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31)
#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29)
#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19)
#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31)
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
#endif

10
arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
Просмотреть файл

@ -3,6 +3,16 @@
#ifndef __GPIO_EP93XX_H
#define __GPIO_EP93XX_H
#include <mach/ep93xx-regs.h>
#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)

1
arch/arm/mach-ep93xx/include/mach/hardware.h
Просмотреть файл

@ -5,7 +5,6 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <mach/ep93xx-regs.h>
#include <mach/platform.h>
/*

16
arch/arm/mach-ep93xx/include/mach/platform.h
Просмотреть файл

@ -21,20 +21,6 @@ struct ep93xx_eth_data
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
/* EP93xx System Controller software locked register write */
void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
static inline void ep93xx_devcfg_set_bits(unsigned int bits)
{
ep93xx_devcfg_set_clear(bits, 0x00);
}
static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
{
ep93xx_devcfg_set_clear(0x00, bits);
}
#define EP93XX_CHIP_REV_D0 3
#define EP93XX_CHIP_REV_D1 4
#define EP93XX_CHIP_REV_E0 5
@ -59,7 +45,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
void ep93xx_keypad_release_gpio(struct platform_device *pdev);
void ep93xx_register_i2s(void);
int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
int ep93xx_i2s_acquire(void);
void ep93xx_i2s_release(void);
void ep93xx_register_ac97(void);

1
arch/arm/mach-ep93xx/micro9.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "soc.h"
/*************************************************************************
* Micro9 NOR Flash

2
arch/arm/mach-ep93xx/simone.c
Просмотреть файл

@ -29,6 +29,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "soc.h"
static struct ep93xx_eth_data __initdata simone_eth_data = {
.phy_id = 1,
};

2
arch/arm/mach-ep93xx/snappercl15.c
Просмотреть файл

@ -35,6 +35,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "soc.h"
#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */

213
arch/arm/mach-ep93xx/soc.h Normal file
Просмотреть файл

@ -0,0 +1,213 @@
/*
* arch/arm/mach-ep93xx/soc.h
*
* Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
* Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef _EP93XX_SOC_H
#define _EP93XX_SOC_H
#include <mach/ep93xx-regs.h>
/*
* EP93xx Physical Memory Map:
*
* The ASDO pin is sampled at system reset to select a synchronous or
* asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
* the synchronous boot mode is selected. When ASDO is "0" (i.e
* pulled-down) the asynchronous boot mode is selected.
*
* In synchronous boot mode nSDCE3 is decoded starting at physical address
* 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
* boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
* decoded at 0xf0000000.
*
* There is known errata for the EP93xx dealing with External Memory
* Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
* Guidelines" for more information. This document can be found at:
*
* http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
*/
#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
#define EP93XX_CS1_PHYS_BASE 0x10000000
#define EP93XX_CS2_PHYS_BASE 0x20000000
#define EP93XX_CS3_PHYS_BASE 0x30000000
#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
#define EP93XX_CS6_PHYS_BASE 0x60000000
#define EP93XX_CS7_PHYS_BASE 0x70000000
#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
/* AHB peripherals */
#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
/* APB peripherals */
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000)
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000)
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000)
#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000)
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
/* System controller */
#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28)
#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27)
#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17)
#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
#define EP93XX_SYSCON_DEVCFG_U3EN (1<<24)
#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
#define EP93XX_SYSCON_DEVCFG_U2EN (1<<20)
#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
#define EP93XX_SYSCON_DEVCFG_U1EN (1<<18)
#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84)
#define EP93XX_SYSCON_CLKDIV_ENABLE (1<<15)
#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14)
#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13)
#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c)
#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31)
#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29)
#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19)
#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31)
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
/* EP93xx System Controller software locked register write */
void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
static inline void ep93xx_devcfg_set_bits(unsigned int bits)
{
ep93xx_devcfg_set_clear(bits, 0x00);
}
static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
{
ep93xx_devcfg_set_clear(0x00, bits);
}
#endif /* _EP93XX_SOC_H */

1
arch/arm/mach-ep93xx/ts72xx.c
Просмотреть файл

@ -28,6 +28,7 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include "soc.h"
static struct map_desc ts72xx_io_desc[] __initdata = {
{

4
arch/arm/mach-ep93xx/vision_ep9307.c
Просмотреть файл

@ -34,10 +34,13 @@
#include <mach/ep93xx_spi.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include "soc.h"
/*************************************************************************
* Static I/O mappings for the FPGA
*************************************************************************/
@ -361,6 +364,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
.restart = ep93xx_restart,

2
arch/arm/mach-exynos/mach-universal_c210.c
Просмотреть файл

@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
.irqflags = IRQF_TRIGGER_FALLING,
};
static struct i2c_board_info i2c3_devs[] __initdata = {

1
arch/arm/mach-omap2/id.c
Просмотреть файл

@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
break;
case 0xb8f2:
switch (rev) {
case 0:

3
arch/arm/mach-omap2/mailbox.c
Просмотреть файл

@ -420,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
platform_driver_unregister(&omap2_mbox_driver);
}
/* must be ready before omap3isp is probed */
subsys_initcall(omap2_mbox_init);
module_init(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");

3
arch/arm/mach-omap2/omap-iommu.c
Просмотреть файл

@ -150,7 +150,8 @@ err_out:
platform_device_put(omap_iommu_pdev[i]);
return err;
}
module_init(omap_iommu_init);
/* must be ready before omap3isp is probed */
subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{

2
arch/arm/mach-omap2/omap4-common.c
Просмотреть файл

@ -31,6 +31,7 @@
#include "common.h"
#include "omap4-sar-layout.h"
#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
@ -55,6 +56,7 @@ void omap_bus_sync(void)
isb();
}
}
EXPORT_SYMBOL(omap_bus_sync);
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)

1
arch/arm/mach-omap2/twl-common.c
Просмотреть файл

@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE

1
arch/arm/mach-pxa/generic.h
Просмотреть файл

@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
#endif
extern struct syscore_ops pxa_irq_syscore_ops;
extern struct syscore_ops pxa_gpio_syscore_ops;
extern struct syscore_ops pxa2xx_mfp_syscore_ops;
extern struct syscore_ops pxa3xx_mfp_syscore_ops;

7
arch/arm/mach-pxa/mfp-pxa2xx.c
Просмотреть файл

@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
{
int i;
/* running before pxa_gpio_probe() */
#ifdef CONFIG_CPU_PXA26x
pxa_last_gpio = 89;
#else
pxa_last_gpio = 84;
#endif
for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
{
int i, gpio;
pxa_last_gpio = 120; /* running before pxa_gpio_probe() */
for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration

2
arch/arm/mach-pxa/pxa25x.c
Просмотреть файл

@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
static struct clk_lookup pxa25x_hwuart_clkreg =
@ -367,7 +368,6 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(pxa25x_devices,

2
arch/arm/mach-pxa/pxa27x.c
Просмотреть файл

@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
#ifdef CONFIG_PM
@ -455,7 +456,6 @@ static int __init pxa27x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/pxa3xx.c
Просмотреть файл

@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

1
arch/arm/mach-pxa/pxa95x.c
Просмотреть файл

@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));

23
arch/arm/mach-s3c24xx/common.h
Просмотреть файл

@ -1,23 +0,0 @@
/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Common Header for S3C2410 machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
#define __ARCH_ARM_MACH_S3C2410_COMMON_H
#ifdef CONFIG_CPU_S3C2410
void s3c2410_restart(char mode, const char *cmd);
#endif
#ifdef CONFIG_CPU_S3C2440
void s3c2440_restart(char mode, const char *cmd);
#endif
#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */

2
arch/arm/mach-s3c24xx/mach-anubis.c
Просмотреть файл

@ -488,5 +488,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-at2440evb.c
Просмотреть файл

@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-gta02.c
Просмотреть файл

@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-mini2440.c
Просмотреть файл

@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-nexcoder.c
Просмотреть файл

@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-osiris.c
Просмотреть файл

@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-rx1950.c
Просмотреть файл

@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-rx3715.c
Просмотреть файл

@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

2
arch/arm/mach-s3c24xx/mach-smdk2440.c
Просмотреть файл

@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
.restart = s3c2440_restart,
.restart = s3c244x_restart,
MACHINE_END

13
arch/arm/mach-s3c24xx/s3c2440.c
Просмотреть файл

@ -35,7 +35,6 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
void s3c2440_restart(char mode, const char *cmd)
{
if (mode == 's') {
soft_restart(0);
}
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}

12
arch/arm/mach-s3c24xx/s3c244x.c
Просмотреть файл

@ -46,6 +46,7 @@
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
.suspend = s3c244x_suspend,
.resume = s3c244x_resume,
};
void s3c244x_restart(char mode, const char *cmd)
{
if (mode == 's')
soft_restart(0);
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}

2
arch/arm/mach-ux500/Kconfig
Просмотреть файл

@ -5,7 +5,7 @@ config UX500_SOC_COMMON
default y
select ARM_GIC
select HAS_MTU
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select ARM_ERRATA_754322
select ARM_ERRATA_764369

2
arch/arm/mach-vexpress/Kconfig
Просмотреть файл

@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
select ARM_GIC
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select ARM_ERRATA_753970
select PL310_ERRATA_753970
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0

4
arch/arm/mm/proc-v7.S
Просмотреть файл

@ -230,9 +230,7 @@ __v7_setup:
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register

10
arch/arm/plat-omap/include/plat/irqs.h
Просмотреть файл

@ -428,8 +428,16 @@
#define OMAP_GPMC_NR_IRQS 8
#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
/* PRCM IRQ handler */
#ifdef CONFIG_ARCH_OMAP2PLUS
#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
#define OMAP_PRCM_NR_IRQS 64
#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
#else
#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
#endif
#define NR_IRQS OMAP_GPMC_IRQ_END
#define NR_IRQS OMAP_PRCM_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))

2
arch/arm/plat-s3c24xx/dma.c
Просмотреть файл

@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
int channel;
for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
s3c2410_dma_resume_chan(cp);
}

2
arch/arm/plat-samsung/devs.c
Просмотреть файл

@ -1398,7 +1398,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
#ifdef CONFIG_S3C_DEV_USB_HSOTG
static struct resource s3c_usb_hsotg_resources[] = {
[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
[1] = DEFINE_RES_IRQ(IRQ_OTG),
};

6
arch/arm/plat-spear/time.c
Просмотреть файл

@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
static int clockevent_next_event(unsigned long cycles,
struct clock_event_device *clk_event_dev)
{
u16 val;
u16 val = readw(gpt_base + CR(CLKEVT));
if (val & CTRL_ENABLE)
writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
writew(cycles, gpt_base + LOAD(CLKEVT));
val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ENABLE | CTRL_INT_ENABLE;
writew(val, gpt_base + CR(CLKEVT));

4
arch/c6x/include/asm/processor.h
Просмотреть файл

@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
extern unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) (task_pt_regs(task)->pc)
#define KSTK_ESP(tsk) (task_pt_regs(task)->sp)
#define KSTK_EIP(task) (task_pt_regs(task)->pc)
#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#define cpu_relax() do { } while (0)

2
arch/mips/alchemy/common/time.c
Просмотреть файл

@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */
clockevents_register_device(cd);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);

2
arch/mips/ath79/dev-wmac.c
Просмотреть файл

@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
{
if (soc_is_ar913x())
ar913x_wmac_setup();
if (soc_is_ar933x())
else if (soc_is_ar933x())
ar933x_wmac_setup();
else
BUG();

4
arch/mips/configs/nlm_xlp_defconfig
Просмотреть файл

@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
# CONFIG_SECCOMP is not set
CONFIG_USE_OF=y
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="mips-linux-gnu-"
CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -22,7 +22,7 @@ CONFIG_AUDIT=y
CONFIG_CGROUPS=y
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_LZMA=y

4
arch/mips/configs/nlm_xlr_defconfig
Просмотреть файл

@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_KEXEC=y
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="mips-linux-gnu-"
CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@ -22,7 +22,7 @@ CONFIG_AUDIT=y
CONFIG_NAMESPACES=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_GZIP=y

2
arch/mips/configs/powertv_defconfig
Просмотреть файл

@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE="mips-linux-"
CONFIG_CROSS_COMPILE=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=16

20
arch/mips/include/asm/mach-au1x00/gpio-au1300.h
Просмотреть файл

@ -11,6 +11,9 @@
#include <asm/io.h>
#include <asm/mach-au1x00/au1000.h>
struct gpio;
struct gpio_chip;
/* with the current GPIC design, up to 128 GPIOs are possible.
* The only implementation so far is in the Au1300, which has 75 externally
* available GPIOs.
@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
return 0;
}
static inline void gpio_free(unsigned int gpio)
static inline int gpio_request_one(unsigned gpio,
unsigned long flags, const char *label)
{
return 0;
}
static inline int gpio_request_array(struct gpio *array, size_t num)
{
return 0;
}
static inline void gpio_free(unsigned gpio)
{
}
static inline void gpio_free_array(struct gpio *array, size_t num)
{
}

3
arch/mips/include/asm/page.h
Просмотреть файл

@ -39,9 +39,6 @@
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
#else /* !CONFIG_HUGETLB_PAGE */
# ifndef BUILD_BUG
# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
# endif
#define HPAGE_SHIFT ({BUILD_BUG(); 0; })
#define HPAGE_SIZE ({BUILD_BUG(); 0; })
#define HPAGE_MASK ({BUILD_BUG(); 0; })

1
arch/mips/kernel/smp-bmips.c
Просмотреть файл

@ -8,7 +8,6 @@
* SMP support for BMIPS
*/
#include <linux/version.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>

2
arch/mips/kernel/traps.c
Просмотреть файл

@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
printk(KERN_DEBUG "YIELD Scheduler Exception\n");
break;
case 5:
printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
break;
default:
printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",

1
arch/mips/kernel/vmlinux.lds.S
Просмотреть файл

@ -69,7 +69,6 @@ SECTIONS
RODATA
/* writeable */
_sdata = .; /* Start of data section */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */

36
arch/mips/mm/fault.c
Просмотреть файл

@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
const int field = sizeof(unsigned long) * 2;
siginfo_t info;
int fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
(write ? FAULT_FLAG_WRITE : 0);
#if 0
printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
@ -144,7 +147,11 @@ good_area:
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
fault = handle_mm_fault(mm, vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
@ -153,12 +160,27 @@ good_area:
goto do_sigbus;
BUG();
}
if (fault & VM_FAULT_MAJOR) {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
tsk->maj_flt++;
} else {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
tsk->min_flt++;
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
tsk->maj_flt++;
} else {
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
tsk->min_flt++;
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);

5
arch/mips/pci/pci.c
Просмотреть файл

@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
/* Propagate hose info into the subordinate devices. */
struct list_head *ln;
struct pci_dev *dev = bus->self;
if (pci_probe_only && dev &&
@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
pcibios_fixup_device_resources(dev, bus);
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
dev = pci_dev_b(ln);
list_for_each_entry(dev, &bus->devices, bus_list) {
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
pcibios_fixup_device_resources(dev, bus);
}

10
arch/mips/pmc-sierra/yosemite/ht-irq.c
Просмотреть файл

@ -35,16 +35,6 @@
*/
void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_bus *current_bus = bus;
struct pci_dev *devices;
struct list_head *devices_link;
list_for_each(devices_link, &(current_bus->devices)) {
devices = pci_dev_b(devices_link);
if (devices == NULL)
continue;
}
/*
* PLX and SPKT related changes go here
*/

2
arch/mips/txx9/generic/7segled.c
Просмотреть файл

@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
break;
}
dev->id = i;
dev->dev = &tx_7segled_subsys;
dev->bus = &tx_7segled_subsys;
error = device_register(dev);
if (!error) {
device_create_file(dev, &dev_attr_ascii);

14
arch/x86/ia32/ia32_aout.c
Просмотреть файл

@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
current->mm->free_area_cache = TASK_UNMAPPED_BASE;
current->mm->cached_hole_size = 0;
retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
if (retval < 0) {
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
install_exec_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
@ -410,13 +417,6 @@ beyond_if:
set_brk(current->mm->start_brk, current->mm->brk);
retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
if (retval < 0) {
/* Someone check-me: is this error path enough? */
send_sig(SIGKILL, current, 0);
return retval;
}
current->mm->start_stack =
(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
/* start thread */

4
arch/x86/lib/delay.c
Просмотреть файл

@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops)
}
/* TSC based delay: */
static void delay_tsc(unsigned long loops)
static void delay_tsc(unsigned long __loops)
{
unsigned long bclock, now;
u32 bclock, now, loops = __loops;
int cpu;
preempt_disable();

4
arch/x86/mm/hugetlbpage.c
Просмотреть файл

@ -333,13 +333,15 @@ try_again:
* Lookup failure means no vma is above this address,
* i.e. return with success:
*/
if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
vma = find_vma(mm, addr);
if (!vma)
return addr;
/*
* new region fits between prev_vma->vm_end and
* vma->vm_start, use it:
*/
prev_vma = vma->vm_prev;
if (addr + len <= vma->vm_start &&
(!prev_vma || (addr >= prev_vma->vm_end))) {
/* remember the address as a hint for next time */

22
arch/x86/pci/acpi.c
Просмотреть файл

@ -60,6 +60,16 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
},
},
/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
{
.callback = set_use_crs,
.ident = "MSI MS-7253",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
},
},
/* Now for the blacklist.. */
@ -282,9 +292,6 @@ static void add_resources(struct pci_root_info *info)
int i;
struct resource *res, *root, *conflict;
if (!pci_use_crs)
return;
coalesce_windows(info, IORESOURCE_MEM);
coalesce_windows(info, IORESOURCE_IO);
@ -336,8 +343,13 @@ get_current_resources(struct acpi_device *device, int busnum,
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
add_resources(&info);
return;
if (pci_use_crs) {
add_resources(&info);
return;
}
kfree(info.name);
name_alloc_fail:
kfree(info.res);

2
drivers/block/floppy.c
Просмотреть файл

@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev)
bio.bi_size = size;
bio.bi_bdev = bdev;
bio.bi_sector = 0;
bio.bi_flags = BIO_QUIET;
bio.bi_flags = (1 << BIO_QUIET);
init_completion(&complete);
bio.bi_private = &complete;
bio.bi_end_io = floppy_rb0_complete;

7
drivers/gpio/gpio-ep93xx.c
Просмотреть файл

@ -378,13 +378,6 @@ static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
}
ep93xx_gpio->mmio_base = mmio;
/* Default all ports to GPIO */
ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
EP93XX_SYSCON_DEVCFG_GONK |
EP93XX_SYSCON_DEVCFG_EONIDE |
EP93XX_SYSCON_DEVCFG_GONIDE |
EP93XX_SYSCON_DEVCFG_HONIDE);
for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];

2
drivers/gpu/drm/gma500/cdv_device.c
Просмотреть файл

@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev)
cdv_get_core_freq(dev);
gma_intel_opregion_init(dev);
psb_intel_init_bios(dev);
REG_WRITE(PORT_HOTPLUG_EN, 0);
REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
return 0;
}

1
drivers/gpu/drm/gma500/framebuffer.c
Просмотреть файл

@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = {
.fb_imageblit = cfb_imageblit,
.fb_pan_display = psbfb_pan,
.fb_mmap = psbfb_mmap,
.fb_sync = psbfb_sync,
.fb_ioctl = psbfb_ioctl,
};

9
drivers/gpu/drm/gma500/gtt.c
Просмотреть файл

@ -446,10 +446,9 @@ int psb_gtt_init(struct drm_device *dev, int resume)
pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
>> PAGE_SHIFT;
/* Some CDV firmware doesn't report this currently. In which case the
system has 64 gtt pages */
/* CDV doesn't report this. In which case the system has 64 gtt pages */
if (pg->gtt_start == 0 || gtt_pages == 0) {
dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n");
gtt_pages = 64;
pg->gtt_start = dev_priv->pge_ctl;
}
@ -461,10 +460,10 @@ int psb_gtt_init(struct drm_device *dev, int resume)
if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
static struct resource fudge; /* Preferably peppermint */
/* This can occur on CDV SDV systems. Fudge it in this case.
/* This can occur on CDV systems. Fudge it in this case.
We really don't care what imaginary space is being allocated
at this point */
dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n");
pg->gatt_start = 0x40000000;
pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
/* This is a little confusing but in fact the GTT is providing

3
drivers/gpu/drm/radeon/r600.c
Просмотреть файл

@ -2362,6 +2362,9 @@ void r600_semaphore_ring_emit(struct radeon_device *rdev,
uint64_t addr = semaphore->gpu_addr;
unsigned sel = emit_wait ? PACKET3_SEM_SEL_WAIT : PACKET3_SEM_SEL_SIGNAL;
if (rdev->family < CHIP_CAYMAN)
sel |= PACKET3_SEM_WAIT_ON_SIGNAL;
radeon_ring_write(ring, PACKET3(PACKET3_MEM_SEMAPHORE, 1));
radeon_ring_write(ring, addr & 0xffffffff);
radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);

8
drivers/gpu/drm/radeon/r600_blit_shaders.c
Просмотреть файл

@ -313,6 +313,10 @@ const u32 r6xx_default_state[] =
0x00000000, /* VGT_REUSE_OFF */
0x00000000, /* VGT_VTX_CNT_EN */
0xc0016900,
0x000000d4,
0x00000000, /* SX_MISC */
0xc0016900,
0x000002c8,
0x00000000, /* VGT_STRMOUT_BUFFER_EN */
@ -625,6 +629,10 @@ const u32 r7xx_default_state[] =
0x00000000, /* VGT_REUSE_OFF */
0x00000000, /* VGT_VTX_CNT_EN */
0xc0016900,
0x000000d4,
0x00000000, /* SX_MISC */
0xc0016900,
0x000002c8,
0x00000000, /* VGT_STRMOUT_BUFFER_EN */

1
drivers/gpu/drm/radeon/r600d.h
Просмотреть файл

@ -831,6 +831,7 @@
#define PACKET3_STRMOUT_BUFFER_UPDATE 0x34
#define PACKET3_INDIRECT_BUFFER_MP 0x38
#define PACKET3_MEM_SEMAPHORE 0x39
# define PACKET3_SEM_WAIT_ON_SIGNAL (0x1 << 12)
# define PACKET3_SEM_SEL_SIGNAL (0x6 << 29)
# define PACKET3_SEM_SEL_WAIT (0x7 << 29)
#define PACKET3_MPEG_INDEX 0x3A

2
drivers/gpu/drm/radeon/radeon_connectors.c
Просмотреть файл

@ -1057,7 +1057,7 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector,
(radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
return MODE_OK;
else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) {
if (ASIC_IS_DCE3(rdev)) {
if (0) {
/* HDMI 1.3+ supports max clock of 340 Mhz */
if (mode->clock > 340000)
return MODE_CLOCK_HIGH;

18
drivers/gpu/drm/radeon/radeon_display.c
Просмотреть файл

@ -1078,15 +1078,21 @@ static const struct drm_framebuffer_funcs radeon_fb_funcs = {
.create_handle = radeon_user_framebuffer_create_handle,
};
void
int
radeon_framebuffer_init(struct drm_device *dev,
struct radeon_framebuffer *rfb,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_gem_object *obj)
{
int ret;
rfb->obj = obj;
drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
ret = drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
if (ret) {
rfb->obj = NULL;
return ret;
}
drm_helper_mode_fill_fb_struct(&rfb->base, mode_cmd);
return 0;
}
static struct drm_framebuffer *
@ -1096,6 +1102,7 @@ radeon_user_framebuffer_create(struct drm_device *dev,
{
struct drm_gem_object *obj;
struct radeon_framebuffer *radeon_fb;
int ret;
obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]);
if (obj == NULL) {
@ -1108,7 +1115,12 @@ radeon_user_framebuffer_create(struct drm_device *dev,
if (radeon_fb == NULL)
return ERR_PTR(-ENOMEM);
radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
ret = radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
if (ret) {
kfree(radeon_fb);
drm_gem_object_unreference_unlocked(obj);
return NULL;
}
return &radeon_fb->base;
}

6
drivers/gpu/drm/radeon/radeon_encoders.c
Просмотреть файл

@ -307,8 +307,6 @@ void radeon_panel_mode_fixup(struct drm_encoder *encoder,
bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
u32 pixel_clock)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *dig_connector;
@ -326,7 +324,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
case DRM_MODE_CONNECTOR_HDMIB:
if (radeon_connector->use_digital) {
/* HDMI 1.3 supports up to 340 Mhz over single link */
if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
if (pixel_clock > 340000)
return true;
else
@ -348,7 +346,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
return false;
else {
/* HDMI 1.3 supports up to 340 Mhz over single link */
if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
if (pixel_clock > 340000)
return true;
else

11
drivers/gpu/drm/radeon/radeon_fb.c
Просмотреть файл

@ -209,6 +209,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
sizes->surface_depth);
ret = radeonfb_create_pinned_object(rfbdev, &mode_cmd, &gobj);
if (ret) {
DRM_ERROR("failed to create fbcon object %d\n", ret);
return ret;
}
rbo = gem_to_radeon_bo(gobj);
/* okay we have an object now allocate the framebuffer */
@ -220,7 +225,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
info->par = rfbdev;
radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
if (ret) {
DRM_ERROR("failed to initalise framebuffer %d\n", ret);
goto out_unref;
}
fb = &rfbdev->rfb.base;

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше