e1000e: Driver workaround for IPv6 Header Extension Erratum.

Previously, IPv6 extension header parsing was disabled for all devices
supported by e1000e when using packet split mode. However, as per a
silicon errata, only certain devices need this restriction and will need
to disable IPv6 extension header parsing for all modes.

Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
Matthew Vick 2012-04-25 08:01:05 +00:00 коммит произвёл Jeff Kirsher
Родитель 885fe7be4b
Коммит f6bd5577a3
4 изменённых файлов: 26 добавлений и 8 удалений

Просмотреть файл

@ -944,6 +944,14 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
else
reg |= (1 << 28);
ew32(TARC(1), reg);
/*
* Disable IPv6 extension header parsing because some malformed
* IPv6 headers can hang the Rx.
*/
reg = er32(RFCTL);
reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
ew32(RFCTL, reg);
}
/**

Просмотреть файл

@ -1279,6 +1279,16 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
ew32(CTRL_EXT, reg);
}
/*
* Disable IPv6 extension header parsing because some malformed
* IPv6 headers can hang the Rx.
*/
if (hw->mac.type <= e1000_82573) {
reg = er32(RFCTL);
reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
ew32(RFCTL, reg);
}
/* PCI-Ex Control Registers */
switch (hw->mac.type) {
case e1000_82574:

Просмотреть файл

@ -3468,6 +3468,13 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
*/
reg = er32(RFCTL);
reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
/*
* Disable IPv6 extension header parsing because some malformed
* IPv6 headers can hang the Rx.
*/
if (hw->mac.type == e1000_ich8lan)
reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
ew32(RFCTL, reg);
}

Просмотреть файл

@ -2939,6 +2939,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
/* Enable Extended Status in all Receive Descriptors */
rfctl = er32(RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
ew32(RFCTL, rfctl);
/*
* 82571 and greater support packet-split where the protocol
@ -2964,13 +2965,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
if (adapter->rx_ps_pages) {
u32 psrctl = 0;
/*
* disable packet split support for IPv6 extension headers,
* because some malformed IPv6 headers can hang the Rx
*/
rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
E1000_RFCTL_NEW_IPV6_EXT_DIS);
/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
@ -3009,7 +3003,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
*/
}
ew32(RFCTL, rfctl);
ew32(RCTL, rctl);
/* just started the receive unit, no need to restart */
adapter->flags &= ~FLAG_RX_RESTART_NOW;