diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index d09c6355e22d..51c7622dc20b 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -72,7 +72,7 @@ examples:
 
             mux-controls = <&mux>;
 
-            spi-flash@0 {
+            flash@0 {
                 compatible = "jedec,spi-nor";
                 reg = <0>;
                 spi-max-frequency = <40000000>;
diff --git a/MAINTAINERS b/MAINTAINERS
index 81e1edeceae4..04babfa8fc76 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17304,6 +17304,12 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stm32*
 
+ST STM32 SPI DRIVER
+M:	Alain Volmat <alain.volmat@foss.st.com>
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	drivers/spi/spi-stm32.c
+
 ST STPDDC60 DRIVER
 M:	Daniel Nilsson <daniel.nilsson@flex.com>
 L:	linux-hwmon@vger.kernel.org
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8b161ec4943b..f4481fe48bf0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -65,7 +65,7 @@ config SPI_ALTERA
 	  This is the driver for the Altera SPI Controller.
 
 config SPI_ALTERA_CORE
-	tristate "Altera SPI Controller core code"
+	tristate "Altera SPI Controller core code" if COMPILE_TEST
 	select REGMAP
 	help
 	  "The core code for the Altera SPI Controller"
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 028736687488..fb45e6af6638 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1375,11 +1375,13 @@ poll_mode:
 	ret = spi_register_controller(ctlr);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
-		goto out_free_irq;
+		goto out_release_dma;
 	}
 
 	return ret;
 
+out_release_dma:
+	dspi_release_dma(dspi);
 out_free_irq:
 	if (dspi->irq)
 		free_irq(dspi->irq, dspi);
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 297c512069a5..5d27ee482237 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -174,7 +174,7 @@ static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode)
 static int sc18is602_check_transfer(struct spi_device *spi,
 				    struct spi_transfer *t, int tlen)
 {
-	if (t && t->len + tlen > SC18IS602_BUFSIZ)
+	if (t && t->len + tlen > SC18IS602_BUFSIZ + 1)
 		return -EINVAL;
 
 	return 0;
@@ -219,6 +219,11 @@ static int sc18is602_transfer_one(struct spi_master *master,
 	return status;
 }
 
+static size_t sc18is602_max_transfer_size(struct spi_device *spi)
+{
+	return SC18IS602_BUFSIZ;
+}
+
 static int sc18is602_setup(struct spi_device *spi)
 {
 	struct sc18is602 *hw = spi_master_get_devdata(spi->master);
@@ -293,6 +298,8 @@ static int sc18is602_probe(struct i2c_client *client,
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->setup = sc18is602_setup;
 	master->transfer_one_message = sc18is602_transfer_one;
+	master->max_transfer_size = sc18is602_max_transfer_size;
+	master->max_message_size = sc18is602_max_transfer_size;
 	master->dev.of_node = np;
 	master->min_speed_hz = hw->freq / 128;
 	master->max_speed_hz = hw->freq / 4;
diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c
index b41a75749b49..28e70db9bbba 100644
--- a/drivers/spi/spi-sprd.c
+++ b/drivers/spi/spi-sprd.c
@@ -1068,6 +1068,7 @@ static const struct of_device_id sprd_spi_of_match[] = {
 	{ .compatible = "sprd,sc9860-spi", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, sprd_spi_of_match);
 
 static struct platform_driver sprd_spi_driver = {
 	.driver = {
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5d8a5ee62fa2..5a3d81c31d04 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -367,7 +367,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
 }
 
 /**
- * zynq_qspi_setup - Configure the QSPI controller
+ * zynq_qspi_setup_op - Configure the QSPI controller
  * @spi:	Pointer to the spi_device structure
  *
  * Sets the operational mode of QSPI controller for the next QSPI transfer, baud
@@ -528,18 +528,17 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 	struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
 	int err = 0, i;
 	u8 *tmpbuf;
-	u8 opcode = op->cmd.opcode;
 
 	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
-		opcode, op->cmd.buswidth, op->addr.buswidth,
+		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
 		op->dummy.buswidth, op->data.buswidth);
 
 	zynq_qspi_chipselect(mem->spi, true);
 	zynq_qspi_config_op(xqspi, mem->spi);
 
-	if (op->cmd.nbytes) {
+	if (op->cmd.opcode) {
 		reinit_completion(&xqspi->data_completion);
-		xqspi->txbuf = &opcode;
+		xqspi->txbuf = (u8 *)&op->cmd.opcode;
 		xqspi->rxbuf = NULL;
 		xqspi->tx_bytes = op->cmd.nbytes;
 		xqspi->rx_bytes = op->cmd.nbytes;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ba425b9c7700..e353b7a9e54e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -47,10 +47,6 @@ static void spidev_release(struct device *dev)
 {
 	struct spi_device	*spi = to_spi_device(dev);
 
-	/* spi controllers may cleanup for released devices */
-	if (spi->controller->cleanup)
-		spi->controller->cleanup(spi);
-
 	spi_controller_put(spi->controller);
 	kfree(spi->driver_override);
 	kfree(spi);
@@ -558,6 +554,12 @@ static int spi_dev_check(struct device *dev, void *data)
 	return 0;
 }
 
+static void spi_cleanup(struct spi_device *spi)
+{
+	if (spi->controller->cleanup)
+		spi->controller->cleanup(spi);
+}
+
 /**
  * spi_add_device - Add spi_device allocated with spi_alloc_device
  * @spi: spi_device to register
@@ -622,11 +624,13 @@ int spi_add_device(struct spi_device *spi)
 
 	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0)
+	if (status < 0) {
 		dev_err(dev, "can't add %s, status %d\n",
 				dev_name(&spi->dev), status);
-	else
+		spi_cleanup(spi);
+	} else {
 		dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
+	}
 
 done:
 	mutex_unlock(&spi_add_lock);
@@ -717,7 +721,9 @@ void spi_unregister_device(struct spi_device *spi)
 	if (ACPI_COMPANION(&spi->dev))
 		acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
 	device_remove_software_node(&spi->dev);
-	device_unregister(&spi->dev);
+	device_del(&spi->dev);
+	spi_cleanup(spi);
+	put_device(&spi->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_device);
 
@@ -814,15 +820,29 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 
 	if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio)) {
 		if (!(spi->mode & SPI_NO_CS)) {
-			if (spi->cs_gpiod)
-				/* polarity handled by gpiolib */
-				gpiod_set_value_cansleep(spi->cs_gpiod, activate);
-			else
+			if (spi->cs_gpiod) {
+				/*
+				 * Historically ACPI has no means of the GPIO polarity and
+				 * thus the SPISerialBus() resource defines it on the per-chip
+				 * basis. In order to avoid a chain of negations, the GPIO
+				 * polarity is considered being Active High. Even for the cases
+				 * when _DSD() is involved (in the updated versions of ACPI)
+				 * the GPIO CS polarity must be defined Active High to avoid
+				 * ambiguity. That's why we use enable, that takes SPI_CS_HIGH
+				 * into account.
+				 */
+				if (has_acpi_companion(&spi->dev))
+					gpiod_set_value_cansleep(spi->cs_gpiod, !enable);
+				else
+					/* Polarity handled by GPIO library */
+					gpiod_set_value_cansleep(spi->cs_gpiod, activate);
+			} else {
 				/*
 				 * invert the enable line, as active low is
 				 * default for SPI.
 				 */
 				gpio_set_value_cansleep(spi->cs_gpio, !enable);
+			}
 		}
 		/* Some SPI masters need both GPIO CS & slave_select */
 		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
@@ -3451,9 +3471,12 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup,
 
 	if (spi->controller->set_cs_timing &&
 	    !(spi->cs_gpiod || gpio_is_valid(spi->cs_gpio))) {
+		mutex_lock(&spi->controller->io_mutex);
+
 		if (spi->controller->auto_runtime_pm) {
 			status = pm_runtime_get_sync(parent);
 			if (status < 0) {
+				mutex_unlock(&spi->controller->io_mutex);
 				pm_runtime_put_noidle(parent);
 				dev_err(&spi->controller->dev, "Failed to power device: %d\n",
 					status);
@@ -3464,11 +3487,13 @@ int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup,
 								hold, inactive);
 			pm_runtime_mark_last_busy(parent);
 			pm_runtime_put_autosuspend(parent);
-			return status;
 		} else {
-			return spi->controller->set_cs_timing(spi, setup, hold,
+			status = spi->controller->set_cs_timing(spi, setup, hold,
 							      inactive);
 		}
+
+		mutex_unlock(&spi->controller->io_mutex);
+		return status;
 	}
 
 	if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) ||
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 360a3bc767ca..74239d65c7fd 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -644,8 +644,8 @@ struct spi_controller {
 	int			*cs_gpios;
 	struct gpio_desc	**cs_gpiods;
 	bool			use_gpio_descriptors;
-	u8			unused_native_cs;
-	u8			max_native_cs;
+	s8			unused_native_cs;
+	s8			max_native_cs;
 
 	/* statistics */
 	struct spi_statistics	statistics;