ARM: at91: add of irq priorities support
Add a third cell to define irq priority. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Ludovic Desroches
Nicolas Ferre
Родитель
c657394370
Коммит
f8a073ee37
|
|
@ -4,7 +4,7 @@ Required properties:
|
|||
- compatible: Should be "atmel,<chip>-aic"
|
||||
- interrupt-controller: Identifies the node as an interrupt controller.
|
||||
- interrupt-parent: For single AIC system, it is an empty property.
|
||||
- #interrupt-cells: The number of cells to define the interrupts. It sould be 2.
|
||||
- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
|
||||
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
|
||||
The second cell is used to specify flags:
|
||||
bits[3:0] trigger type and level flags:
|
||||
|
|
@ -14,6 +14,8 @@ Required properties:
|
|||
8 = active low level-sensitive.
|
||||
Valid combinations are 1, 2, 3, 4, 8.
|
||||
Default flag for internal sources should be set to 4 (active high).
|
||||
The third cell is used to specify the irq priority from 0 (lowest) to 7
|
||||
(highest).
|
||||
- reg: Should contain AIC registers location and length
|
||||
- atmel,external-irqs: u32 array of external irqs.
|
||||
|
||||
|
|
@ -25,7 +27,7 @@ Examples:
|
|||
compatible = "atmel,at91rm9200-aic";
|
||||
interrupt-controller;
|
||||
interrupt-parent;
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <3>;
|
||||
reg = <0xfffff000 0x200>;
|
||||
};
|
||||
|
||||
|
|
@ -35,5 +37,5 @@ Examples:
|
|||
dma: dma-controller@ffffec00 {
|
||||
compatible = "atmel,at91sam9g45-dma";
|
||||
reg = <0xffffec00 0x200>;
|
||||
interrupts = <21 4>;
|
||||
interrupts = <21 4 5>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@
|
|||
ranges;
|
||||
|
||||
aic: interrupt-controller@fffff000 {
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "atmel,at91rm9200-aic";
|
||||
interrupt-controller;
|
||||
reg = <0xfffff000 0x200>;
|
||||
|
|
@ -82,25 +82,25 @@
|
|||
pit: timer@fffffd30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffd30 0xf>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
};
|
||||
|
||||
tcb0: timer@fffa0000 {
|
||||
compatible = "atmel,at91rm9200-tcb";
|
||||
reg = <0xfffa0000 0x100>;
|
||||
interrupts = <17 4 18 4 19 4>;
|
||||
interrupts = <17 4 0 18 4 0 19 4 0>;
|
||||
};
|
||||
|
||||
tcb1: timer@fffdc000 {
|
||||
compatible = "atmel,at91rm9200-tcb";
|
||||
reg = <0xfffdc000 0x100>;
|
||||
interrupts = <26 4 27 4 28 4>;
|
||||
interrupts = <26 4 0 27 4 0 28 4 0>;
|
||||
};
|
||||
|
||||
pioA: gpio@fffff400 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff400 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -109,7 +109,7 @@
|
|||
pioB: gpio@fffff600 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff600 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -118,7 +118,7 @@
|
|||
pioC: gpio@fffff800 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff800 0x100>;
|
||||
interrupts = <4 4>;
|
||||
interrupts = <4 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -127,14 +127,14 @@
|
|||
dbgu: serial@fffff200 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffff200 0x200>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart0: serial@fffb0000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffb0000 0x200>;
|
||||
interrupts = <6 4>;
|
||||
interrupts = <6 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -143,7 +143,7 @@
|
|||
usart1: serial@fffb4000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffb4000 0x200>;
|
||||
interrupts = <7 4>;
|
||||
interrupts = <7 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -152,7 +152,7 @@
|
|||
usart2: serial@fffb8000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffb8000 0x200>;
|
||||
interrupts = <8 4>;
|
||||
interrupts = <8 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -161,7 +161,7 @@
|
|||
usart3: serial@fffd0000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffd0000 0x200>;
|
||||
interrupts = <23 4>;
|
||||
interrupts = <23 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -170,7 +170,7 @@
|
|||
usart4: serial@fffd4000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffd4000 0x200>;
|
||||
interrupts = <24 4>;
|
||||
interrupts = <24 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -179,7 +179,7 @@
|
|||
usart5: serial@fffd8000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffd8000 0x200>;
|
||||
interrupts = <25 4>;
|
||||
interrupts = <25 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -188,21 +188,21 @@
|
|||
macb0: ethernet@fffc4000 {
|
||||
compatible = "cdns,at32ap7000-macb", "cdns,macb";
|
||||
reg = <0xfffc4000 0x100>;
|
||||
interrupts = <21 4>;
|
||||
interrupts = <21 4 3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: gadget@fffa4000 {
|
||||
compatible = "atmel,at91rm9200-udc";
|
||||
reg = <0xfffa4000 0x4000>;
|
||||
interrupts = <10 4>;
|
||||
interrupts = <10 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc0: adc@fffe0000 {
|
||||
compatible = "atmel,at91sam9260-adc";
|
||||
reg = <0xfffe0000 0x100>;
|
||||
interrupts = <5 4>;
|
||||
interrupts = <5 4 0>;
|
||||
atmel,adc-use-external-triggers;
|
||||
atmel,adc-channels-used = <0xf>;
|
||||
atmel,adc-vref = <3300>;
|
||||
|
|
@ -254,7 +254,7 @@
|
|||
usb0: ohci@00500000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00500000 0x100000>;
|
||||
interrupts = <20 4>;
|
||||
interrupts = <20 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@
|
|||
ranges;
|
||||
|
||||
aic: interrupt-controller@fffff000 {
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "atmel,at91rm9200-aic";
|
||||
interrupt-controller;
|
||||
reg = <0xfffff000 0x200>;
|
||||
|
|
@ -69,13 +69,13 @@
|
|||
pit: timer@fffffd30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffd30 0xf>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
};
|
||||
|
||||
tcb0: timer@fff7c000 {
|
||||
compatible = "atmel,at91rm9200-tcb";
|
||||
reg = <0xfff7c000 0x100>;
|
||||
interrupts = <19 4>;
|
||||
interrupts = <19 4 0>;
|
||||
};
|
||||
|
||||
rstc@fffffd00 {
|
||||
|
|
@ -91,7 +91,7 @@
|
|||
pioA: gpio@fffff200 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff200 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -100,7 +100,7 @@
|
|||
pioB: gpio@fffff400 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff400 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -109,7 +109,7 @@
|
|||
pioC: gpio@fffff600 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff600 0x100>;
|
||||
interrupts = <4 4>;
|
||||
interrupts = <4 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -118,7 +118,7 @@
|
|||
pioD: gpio@fffff800 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff800 0x100>;
|
||||
interrupts = <4 4>;
|
||||
interrupts = <4 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -127,7 +127,7 @@
|
|||
pioE: gpio@fffffa00 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffffa00 0x100>;
|
||||
interrupts = <4 4>;
|
||||
interrupts = <4 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -136,14 +136,14 @@
|
|||
dbgu: serial@ffffee00 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xffffee00 0x200>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart0: serial@fff8c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff8c000 0x200>;
|
||||
interrupts = <7 4>;
|
||||
interrupts = <7 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -152,7 +152,7 @@
|
|||
usart1: serial@fff90000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff90000 0x200>;
|
||||
interrupts = <8 4>;
|
||||
interrupts = <8 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -161,7 +161,7 @@
|
|||
usart2: serial@fff94000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff94000 0x200>;
|
||||
interrupts = <9 4>;
|
||||
interrupts = <9 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -170,14 +170,14 @@
|
|||
macb0: ethernet@fffbc000 {
|
||||
compatible = "cdns,at32ap7000-macb", "cdns,macb";
|
||||
reg = <0xfffbc000 0x100>;
|
||||
interrupts = <21 4>;
|
||||
interrupts = <21 4 3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: gadget@fff78000 {
|
||||
compatible = "atmel,at91rm9200-udc";
|
||||
reg = <0xfff78000 0x4000>;
|
||||
interrupts = <24 4>;
|
||||
interrupts = <24 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
@ -201,7 +201,7 @@
|
|||
usb0: ohci@00a00000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00a00000 0x100000>;
|
||||
interrupts = <29 4>;
|
||||
interrupts = <29 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@
|
|||
ranges;
|
||||
|
||||
aic: interrupt-controller@fffff000 {
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "atmel,at91rm9200-aic";
|
||||
interrupt-controller;
|
||||
reg = <0xfffff000 0x200>;
|
||||
|
|
@ -79,7 +79,7 @@
|
|||
pit: timer@fffffd30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffd30 0xf>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
};
|
||||
|
||||
|
||||
|
|
@ -91,25 +91,25 @@
|
|||
tcb0: timer@fff7c000 {
|
||||
compatible = "atmel,at91rm9200-tcb";
|
||||
reg = <0xfff7c000 0x100>;
|
||||
interrupts = <18 4>;
|
||||
interrupts = <18 4 0>;
|
||||
};
|
||||
|
||||
tcb1: timer@fffd4000 {
|
||||
compatible = "atmel,at91rm9200-tcb";
|
||||
reg = <0xfffd4000 0x100>;
|
||||
interrupts = <18 4>;
|
||||
interrupts = <18 4 0>;
|
||||
};
|
||||
|
||||
dma: dma-controller@ffffec00 {
|
||||
compatible = "atmel,at91sam9g45-dma";
|
||||
reg = <0xffffec00 0x200>;
|
||||
interrupts = <21 4>;
|
||||
interrupts = <21 4 0>;
|
||||
};
|
||||
|
||||
pioA: gpio@fffff200 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff200 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -118,7 +118,7 @@
|
|||
pioB: gpio@fffff400 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff400 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -127,7 +127,7 @@
|
|||
pioC: gpio@fffff600 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff600 0x100>;
|
||||
interrupts = <4 4>;
|
||||
interrupts = <4 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -136,7 +136,7 @@
|
|||
pioD: gpio@fffff800 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff800 0x100>;
|
||||
interrupts = <5 4>;
|
||||
interrupts = <5 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -145,7 +145,7 @@
|
|||
pioE: gpio@fffffa00 {
|
||||
compatible = "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffffa00 0x100>;
|
||||
interrupts = <5 4>;
|
||||
interrupts = <5 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -154,14 +154,14 @@
|
|||
dbgu: serial@ffffee00 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xffffee00 0x200>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart0: serial@fff8c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff8c000 0x200>;
|
||||
interrupts = <7 4>;
|
||||
interrupts = <7 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -170,7 +170,7 @@
|
|||
usart1: serial@fff90000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff90000 0x200>;
|
||||
interrupts = <8 4>;
|
||||
interrupts = <8 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -179,7 +179,7 @@
|
|||
usart2: serial@fff94000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff94000 0x200>;
|
||||
interrupts = <9 4>;
|
||||
interrupts = <9 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -188,7 +188,7 @@
|
|||
usart3: serial@fff98000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff98000 0x200>;
|
||||
interrupts = <10 4>;
|
||||
interrupts = <10 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -197,14 +197,14 @@
|
|||
macb0: ethernet@fffbc000 {
|
||||
compatible = "cdns,at32ap7000-macb", "cdns,macb";
|
||||
reg = <0xfffbc000 0x100>;
|
||||
interrupts = <25 4>;
|
||||
interrupts = <25 4 3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc0: adc@fffb0000 {
|
||||
compatible = "atmel,at91sam9260-adc";
|
||||
reg = <0xfffb0000 0x100>;
|
||||
interrupts = <20 4>;
|
||||
interrupts = <20 4 0>;
|
||||
atmel,adc-use-external-triggers;
|
||||
atmel,adc-channels-used = <0xff>;
|
||||
atmel,adc-vref = <3300>;
|
||||
|
|
@ -258,14 +258,14 @@
|
|||
usb0: ohci@00700000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00700000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
interrupts = <22 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: ehci@00800000 {
|
||||
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
||||
reg = <0x00800000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
interrupts = <22 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@
|
|||
ranges;
|
||||
|
||||
aic: interrupt-controller@fffff000 {
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "atmel,at91rm9200-aic";
|
||||
interrupt-controller;
|
||||
reg = <0xfffff000 0x200>;
|
||||
|
|
@ -74,7 +74,7 @@
|
|||
pit: timer@fffffe30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffe30 0xf>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
};
|
||||
|
||||
shdwc@fffffe10 {
|
||||
|
|
@ -85,25 +85,25 @@
|
|||
tcb0: timer@f8008000 {
|
||||
compatible = "atmel,at91sam9x5-tcb";
|
||||
reg = <0xf8008000 0x100>;
|
||||
interrupts = <17 4>;
|
||||
interrupts = <17 4 0>;
|
||||
};
|
||||
|
||||
tcb1: timer@f800c000 {
|
||||
compatible = "atmel,at91sam9x5-tcb";
|
||||
reg = <0xf800c000 0x100>;
|
||||
interrupts = <17 4>;
|
||||
interrupts = <17 4 0>;
|
||||
};
|
||||
|
||||
dma: dma-controller@ffffec00 {
|
||||
compatible = "atmel,at91sam9g45-dma";
|
||||
reg = <0xffffec00 0x200>;
|
||||
interrupts = <20 4>;
|
||||
interrupts = <20 4 0>;
|
||||
};
|
||||
|
||||
pioA: gpio@fffff400 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff400 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -112,7 +112,7 @@
|
|||
pioB: gpio@fffff600 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff600 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -121,7 +121,7 @@
|
|||
pioC: gpio@fffff800 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff800 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -130,7 +130,7 @@
|
|||
pioD: gpio@fffffa00 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffffa00 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -139,14 +139,14 @@
|
|||
dbgu: serial@fffff200 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffff200 0x200>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf801c000 0x4000>;
|
||||
interrupts = <5 4>;
|
||||
interrupts = <5 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -155,7 +155,7 @@
|
|||
usart1: serial@f8020000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8020000 0x4000>;
|
||||
interrupts = <6 4>;
|
||||
interrupts = <6 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -164,7 +164,7 @@
|
|||
usart2: serial@f8024000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8024000 0x4000>;
|
||||
interrupts = <7 4>;
|
||||
interrupts = <7 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -173,7 +173,7 @@
|
|||
usart3: serial@f8028000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8028000 0x4000>;
|
||||
interrupts = <8 4>;
|
||||
interrupts = <8 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -201,7 +201,7 @@
|
|||
usb0: ohci@00500000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00500000 0x00100000>;
|
||||
interrupts = <22 4>;
|
||||
interrupts = <22 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@
|
|||
ranges;
|
||||
|
||||
aic: interrupt-controller@fffff000 {
|
||||
#interrupt-cells = <2>;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "atmel,at91rm9200-aic";
|
||||
interrupt-controller;
|
||||
reg = <0xfffff000 0x200>;
|
||||
|
|
@ -81,37 +81,37 @@
|
|||
pit: timer@fffffe30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffe30 0xf>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
};
|
||||
|
||||
tcb0: timer@f8008000 {
|
||||
compatible = "atmel,at91sam9x5-tcb";
|
||||
reg = <0xf8008000 0x100>;
|
||||
interrupts = <17 4>;
|
||||
interrupts = <17 4 0>;
|
||||
};
|
||||
|
||||
tcb1: timer@f800c000 {
|
||||
compatible = "atmel,at91sam9x5-tcb";
|
||||
reg = <0xf800c000 0x100>;
|
||||
interrupts = <17 4>;
|
||||
interrupts = <17 4 0>;
|
||||
};
|
||||
|
||||
dma0: dma-controller@ffffec00 {
|
||||
compatible = "atmel,at91sam9g45-dma";
|
||||
reg = <0xffffec00 0x200>;
|
||||
interrupts = <20 4>;
|
||||
interrupts = <20 4 0>;
|
||||
};
|
||||
|
||||
dma1: dma-controller@ffffee00 {
|
||||
compatible = "atmel,at91sam9g45-dma";
|
||||
reg = <0xffffee00 0x200>;
|
||||
interrupts = <21 4>;
|
||||
interrupts = <21 4 0>;
|
||||
};
|
||||
|
||||
pioA: gpio@fffff400 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff400 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -120,7 +120,7 @@
|
|||
pioB: gpio@fffff600 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff600 0x100>;
|
||||
interrupts = <2 4>;
|
||||
interrupts = <2 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -129,7 +129,7 @@
|
|||
pioC: gpio@fffff800 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffff800 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -138,7 +138,7 @@
|
|||
pioD: gpio@fffffa00 {
|
||||
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
||||
reg = <0xfffffa00 0x100>;
|
||||
interrupts = <3 4>;
|
||||
interrupts = <3 4 1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-controller;
|
||||
|
|
@ -147,14 +147,14 @@
|
|||
dbgu: serial@fffff200 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfffff200 0x200>;
|
||||
interrupts = <1 4>;
|
||||
interrupts = <1 4 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf801c000 0x200>;
|
||||
interrupts = <5 4>;
|
||||
interrupts = <5 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -163,7 +163,7 @@
|
|||
usart1: serial@f8020000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8020000 0x200>;
|
||||
interrupts = <6 4>;
|
||||
interrupts = <6 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -172,7 +172,7 @@
|
|||
usart2: serial@f8024000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8024000 0x200>;
|
||||
interrupts = <7 4>;
|
||||
interrupts = <7 4 5>;
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "disabled";
|
||||
|
|
@ -181,21 +181,21 @@
|
|||
macb0: ethernet@f802c000 {
|
||||
compatible = "cdns,at32ap7000-macb", "cdns,macb";
|
||||
reg = <0xf802c000 0x100>;
|
||||
interrupts = <24 4>;
|
||||
interrupts = <24 4 3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
macb1: ethernet@f8030000 {
|
||||
compatible = "cdns,at32ap7000-macb", "cdns,macb";
|
||||
reg = <0xf8030000 0x100>;
|
||||
interrupts = <27 4>;
|
||||
interrupts = <27 4 3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
compatible = "atmel,at91sam9260-adc";
|
||||
reg = <0xf804c000 0x100>;
|
||||
interrupts = <19 4>;
|
||||
interrupts = <19 4 0>;
|
||||
atmel,adc-use-external;
|
||||
atmel,adc-channels-used = <0xffff>;
|
||||
atmel,adc-vref = <3300>;
|
||||
|
|
@ -249,14 +249,14 @@
|
|||
usb0: ohci@00600000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00600000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
interrupts = <22 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: ehci@00700000 {
|
||||
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
||||
reg = <0x00700000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
interrupts = <22 4 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -28,6 +28,9 @@ extern void __iomem *at91_aic_base;
|
|||
.extern at91_aic_base
|
||||
#endif
|
||||
|
||||
#define AT91_AIC_IRQ_MIN_PRIORITY 0
|
||||
#define AT91_AIC_IRQ_MAX_PRIORITY 7
|
||||
|
||||
#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */
|
||||
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
|
||||
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
|
||||
|
|
|
|||
|
|
@ -30,6 +30,7 @@
|
|||
#include <linux/of_irq.h>
|
||||
#include <linux/irqdomain.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
|
@ -42,6 +43,7 @@
|
|||
void __iomem *at91_aic_base;
|
||||
static struct irq_domain *at91_aic_domain;
|
||||
static struct device_node *at91_aic_np;
|
||||
static unsigned int *at91_aic_irq_priorities;
|
||||
|
||||
static void at91_aic_mask_irq(struct irq_data *d)
|
||||
{
|
||||
|
|
@ -177,8 +179,9 @@ static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
|
|||
/* Put virq number in Source Vector Register */
|
||||
at91_aic_write(AT91_AIC_SVR(hw), virq);
|
||||
|
||||
/* Active Low interrupt, without priority */
|
||||
at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW);
|
||||
/* Active Low interrupt, with priority */
|
||||
at91_aic_write(AT91_AIC_SMR(hw),
|
||||
AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]);
|
||||
|
||||
irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
|
||||
set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
|
||||
|
|
@ -186,9 +189,28 @@ static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
|
||||
const u32 *intspec, unsigned int intsize,
|
||||
irq_hw_number_t *out_hwirq, unsigned int *out_type)
|
||||
{
|
||||
if (WARN_ON(intsize < 3))
|
||||
return -EINVAL;
|
||||
if (WARN_ON(intspec[0] >= NR_AIC_IRQS))
|
||||
return -EINVAL;
|
||||
if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY)
|
||||
|| (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY)))
|
||||
return -EINVAL;
|
||||
|
||||
*out_hwirq = intspec[0];
|
||||
*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
|
||||
at91_aic_irq_priorities[*out_hwirq] = intspec[2];
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_domain_ops at91_aic_irq_ops = {
|
||||
.map = at91_aic_irq_map,
|
||||
.xlate = irq_domain_xlate_twocell,
|
||||
.xlate = at91_aic_irq_domain_xlate,
|
||||
};
|
||||
|
||||
int __init at91_aic_of_init(struct device_node *node,
|
||||
|
|
@ -198,6 +220,12 @@ int __init at91_aic_of_init(struct device_node *node,
|
|||
const __be32 *p;
|
||||
u32 val;
|
||||
|
||||
at91_aic_irq_priorities = kzalloc(NR_AIC_IRQS
|
||||
* sizeof(*at91_aic_irq_priorities),
|
||||
GFP_KERNEL);
|
||||
if (!at91_aic_irq_priorities)
|
||||
return -ENOMEM;
|
||||
|
||||
at91_aic_base = of_iomap(node, 0);
|
||||
at91_aic_np = node;
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче