Merge branch 'linus' into x86/apic

Conflicts:
	arch/x86/kernel/acpi/boot.c
	arch/x86/mm/fault.c
This commit is contained in:
Ingo Molnar 2009-02-13 09:44:22 +01:00
Родитель ba1511bf7f 071a0bc2ce
Коммит f8a6b2b9ce
481 изменённых файлов: 12078 добавлений и 5802 удалений

Просмотреть файл

@ -92,6 +92,7 @@ Rudolf Marek <R.Marek@sh.cvut.cz>
Rui Saraiva <rmps@joel.ist.utl.pt>
Sachin P Sant <ssant@in.ibm.com>
Sam Ravnborg <sam@mars.ravnborg.org>
Sascha Hauer <s.hauer@pengutronix.de>
S.Çağlar Onur <caglar@pardus.org.tr>
Simon Kelley <simon@thekelleys.org.uk>
Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
@ -100,6 +101,7 @@ Tejun Heo <htejun@gmail.com>
Thomas Graf <tgraf@suug.ch>
Tony Luck <tony.luck@intel.com>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>

Просмотреть файл

@ -195,19 +195,3 @@ scaling_setspeed. By "echoing" a new frequency into this
you can change the speed of the CPU,
but only within the limits of
scaling_min_freq and scaling_max_freq.
3.2 Deprecated Interfaces
-------------------------
Depending on your kernel configuration, you might find the following
cpufreq-related files:
/proc/cpufreq
/proc/sys/cpu/*/speed
/proc/sys/cpu/*/speed-min
/proc/sys/cpu/*/speed-max
These are files for deprecated interfaces to cpufreq, which offer far
less functionality. Because of this, these interfaces aren't described
here.

Просмотреть файл

@ -9,6 +9,7 @@ that support it. For example, a given bus might look like this:
| |-- class
| |-- config
| |-- device
| |-- enable
| |-- irq
| |-- local_cpus
| |-- resource
@ -32,6 +33,7 @@ files, each with their own function.
class PCI class (ascii, ro)
config PCI config space (binary, rw)
device PCI device (ascii, ro)
enable Whether the device is enabled (ascii, rw)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
@ -57,10 +59,19 @@ used to do actual device programming from userspace. Note that some platforms
don't support mmapping of certain resources, so be sure to check the return
value from any attempted mmap.
The 'enable' file provides a counter that indicates how many times the device
has been enabled. If the 'enable' file currently returns '4', and a '1' is
echoed into it, it will then return '5'. Echoing a '0' into it will decrease
the count. Even when it returns to 0, though, some of the initialisation
may not be reversed.
The 'rom' file is special in that it provides read-only access to the device's
ROM file, if available. It's disabled by default, however, so applications
should write the string "1" to the file to enable it before attempting a read
call, and disable it following the access by writing "0" to the file.
call, and disable it following the access by writing "0" to the file. Note
that the device must be enabled for a rom read to return data succesfully.
In the event a driver is not bound to the device, it can be enabled using the
'enable' file, documented above.
Accessing legacy resources through sysfs
----------------------------------------

Просмотреть файл

@ -79,13 +79,6 @@ Mount options
(*) == default.
norm_unmount (*) commit on unmount; the journal is committed
when the file-system is unmounted so that the
next mount does not have to replay the journal
and it becomes very fast;
fast_unmount do not commit on unmount; this option makes
unmount faster, but the next mount slower
because of the need to replay the journal.
bulk_read read more in one go to take advantage of flash
media that read faster sequentially
no_bulk_read (*) do not bulk-read

Просмотреть файл

@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
and any comment so marked must be in kernel-doc format. Do not use
"/**" to be begin a comment block unless the comment block contains
kernel-doc formatted comments. The closing comment marker for
kernel-doc comments can be either "*/" or "**/".
kernel-doc comments can be either "*/" or "**/", but "*/" is
preferred in the Linux kernel tree.
Kernel-doc comments should be placed just before the function
or data structure being described.
@ -63,7 +64,7 @@ Example kernel-doc function comment:
* comment lines.
*
* The longer description can have multiple paragraphs.
**/
*/
The first line, with the short description, must be on a single line.
@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
* perhaps with more lines and words.
*
* Longer description of this structure.
**/
*/
The kernel-doc function comments describe each parameter to the
function, in order, with the @name lines.

Просмотреть файл

@ -911,7 +911,7 @@ S: Maintained
BLACKFIN ARCHITECTURE
P: Bryan Wu
M: cooloney@kernel.org
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
@ -1021,6 +1021,14 @@ M: mb@bu3sch.de
W: http://bu3sch.de/btgpio.php
S: Maintained
BTRFS FILE SYSTEM
P: Chris Mason
M: chris.mason@oracle.com
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
S: Maintained
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
@ -1194,6 +1202,8 @@ S: Supported
CONTROL GROUPS (CGROUPS)
P: Paul Menage
M: menage@google.com
P: Li Zefan
M: lizf@cn.fujitsu.com
L: containers@lists.linux-foundation.org
S: Maintained
@ -2212,7 +2222,7 @@ P: Sean Hefty
M: sean.hefty@intel.com
P: Hal Rosenstock
M: hal.rosenstock@gmail.com
L: general@lists.openfabrics.org
L: general@lists.openfabrics.org (moderated for non-subscribers)
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
@ -3529,6 +3539,12 @@ S: Maintained
PXA MMCI DRIVER
S: Orphan
PXA RTC DRIVER
P: Robert Jarzmik
M: robert.jarzmik@free.fr
L: rtc-linux@googlegroups.com
S: Maintained
QLOGIC QLA2XXX FC-SCSI DRIVER
P: Andrew Vasquez
M: linux-driver@qlogic.com
@ -4277,8 +4293,8 @@ P: Rajiv Andrade
M: srajiv@linux.vnet.ibm.com
W: http://tpmdd.sourceforge.net
P: Marcel Selhorst
M: tpm@selhorst.net
W: http://www.prosec.rub.de/tpm/
M: m.selhorst@sirrix.com
W: http://www.sirrix.com
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained

Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Erotic Pickled Herring
# *DOCUMENTATION*

Просмотреть файл

@ -8,12 +8,12 @@
/* ??? Would be nice to use .gprel32 here, but we can't be sure that the
function loaded the GP, so this could fail in modules. */
#define BUG() { \
#define BUG() do { \
__asm__ __volatile__( \
"call_pal %0 # bugchk\n\t" \
".long %1\n\t.8byte %2" \
: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \
for ( ; ; ); }
for ( ; ; ); } while (0)
#define HAVE_ARCH_BUG
#endif

Просмотреть файл

@ -650,6 +650,7 @@ ENTRY(fp_enter)
no_fp: mov pc, lr
__und_usr_unknown:
enable_irq
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr

Просмотреть файл

@ -136,7 +136,7 @@ ENTRY(mcount)
ldmia sp!, {r0-r3, pc}
trace:
ldr r1, [fp, #-4]
ldr r1, [fp, #-4] @ lr of instrumented routine
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc

Просмотреть файл

@ -101,7 +101,7 @@ unlock:
/* Handle bad interrupts */
static struct irq_desc bad_irq_desc = {
.handle_irq = handle_bad_irq,
.lock = SPIN_LOCK_UNLOCKED
.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
#ifdef CONFIG_CPUMASK_OFFSTACK

Просмотреть файл

@ -13,8 +13,8 @@
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
const extern unsigned char relocate_new_kernel[];
const extern unsigned int relocate_new_kernel_size;
extern const unsigned char relocate_new_kernel[];
extern const unsigned int relocate_new_kernel_size;
extern void setup_mm_for_reboot(char mode);

Просмотреть файл

@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/irqs.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>

Просмотреть файл

@ -181,7 +181,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
}
size = OMAP1_MMC_SIZE;
omap_mmc_add(i, base, size, irq, mmc_data[i]);
omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
};
}

Просмотреть файл

@ -28,81 +28,8 @@
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
struct mcbsp_internal_clk {
struct clk clk;
struct clk **childs;
int n_childs;
};
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{
const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
int i;
mclk->n_childs = ARRAY_SIZE(clk_names);
mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
GFP_KERNEL);
for (i = 0; i < mclk->n_childs; i++) {
/* We fake a platform device to get correct device id */
struct platform_device pdev;
pdev.dev.bus = &platform_bus_type;
pdev.id = mclk->clk.id;
mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
if (IS_ERR(mclk->childs[i]))
printk(KERN_ERR "Could not get clock %s (%d).\n",
clk_names[i], mclk->clk.id);
}
}
static int omap_mcbsp_clk_enable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_enable(mclk->childs[i]);
return 0;
}
static void omap_mcbsp_clk_disable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_disable(mclk->childs[i]);
}
static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
{
.clk = {
.name = "mcbsp_clk",
.id = 1,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 3,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
};
#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
#else
#define omap_mcbsp_clks_size 0
static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{ }
const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
#endif
static void omap1_mcbsp_request(unsigned int id)
@ -167,8 +94,9 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
},
.clk_names = clk_names,
.num_clks = 3,
},
{
.phys_base = OMAP1510_MCBSP2_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
@ -184,7 +112,8 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 3,
},
};
#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
@ -202,7 +131,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 3,
},
{
.phys_base = OMAP1610_MCBSP2_BASE,
@ -219,7 +149,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 3,
},
};
#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
@ -230,15 +161,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
int __init omap1_mcbsp_init(void)
{
int i;
for (i = 0; i < omap_mcbsp_clks_size; i++) {
if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
clk_register(&omap_mcbsp_clks[i].clk);
}
}
if (cpu_is_omap730())
omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
if (cpu_is_omap15xx())

Просмотреть файл

@ -421,6 +421,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
int i;
char *name;
for (i = 0; i < nr_controllers; i++) {
unsigned long base, size;
@ -450,12 +451,14 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
continue;
}
if (cpu_is_omap2420())
if (cpu_is_omap2420()) {
size = OMAP2420_MMC_SIZE;
else
name = "mmci-omap";
} else {
size = HSMMC_SIZE;
omap_mmc_add(i, base, size, irq, mmc_data[i]);
name = "mmci-omap-hs";
}
omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
};
}

Просмотреть файл

@ -172,9 +172,13 @@ void __init omap34xx_check_revision(void)
omap_revision = OMAP3430_REV_ES3_0;
rev_name = "ES3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
rev_name = "ES3.1";
break;
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_0;
omap_revision = OMAP3430_REV_ES3_1;
rev_name = "Unknown revision\n";
}
}

Просмотреть файл

@ -134,6 +134,7 @@ static struct irq_chip omap_irq_chip = {
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
.disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)

Просмотреть файл

@ -24,106 +24,7 @@
#include <mach/cpu.h>
#include <mach/mcbsp.h>
struct mcbsp_internal_clk {
struct clk clk;
struct clk **childs;
int n_childs;
};
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
{
const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
int i;
mclk->n_childs = ARRAY_SIZE(clk_names);
mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
GFP_KERNEL);
for (i = 0; i < mclk->n_childs; i++) {
/* We fake a platform device to get correct device id */
struct platform_device pdev;
pdev.dev.bus = &platform_bus_type;
pdev.id = mclk->clk.id;
mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
if (IS_ERR(mclk->childs[i]))
printk(KERN_ERR "Could not get clock %s (%d).\n",
clk_names[i], mclk->clk.id);
}
}
static int omap_mcbsp_clk_enable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_enable(mclk->childs[i]);
return 0;
}
static void omap_mcbsp_clk_disable(struct clk *clk)
{
struct mcbsp_internal_clk *mclk = container_of(clk,
struct mcbsp_internal_clk, clk);
int i;
for (i = 0; i < mclk->n_childs; i++)
clk_disable(mclk->childs[i]);
}
static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
{
.clk = {
.name = "mcbsp_clk",
.id = 1,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 2,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 3,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 4,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
{
.clk = {
.name = "mcbsp_clk",
.id = 5,
.enable = omap_mcbsp_clk_enable,
.disable = omap_mcbsp_clk_disable,
},
},
};
#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
#else
#define omap_mcbsp_clks_size 0
static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
static inline void omap_mcbsp_clk_init(struct clk *clk)
{ }
#endif
const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
static void omap2_mcbsp2_mux_setup(void)
{
@ -156,7 +57,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@ -165,7 +67,8 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@ -183,7 +86,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@ -192,7 +96,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@ -201,7 +106,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@ -210,7 +116,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@ -219,7 +126,8 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@ -237,7 +145,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
@ -246,7 +155,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
@ -255,7 +165,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
@ -264,7 +175,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
@ -273,7 +185,8 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.clk_name = "mcbsp_clk",
.clk_names = clk_names,
.num_clks = 2,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
@ -284,14 +197,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
static int __init omap2_mcbsp_init(void)
{
int i;
for (i = 0; i < omap_mcbsp_clks_size; i++) {
/* Once we call clk_get inside init, we do not register it */
omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
clk_register(&omap_mcbsp_clks[i].clk);
}
if (cpu_is_omap2420())
omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
if (cpu_is_omap2430())

Просмотреть файл

@ -93,9 +93,8 @@ ENTRY(omap24xx_cpu_suspend)
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
str r4, [r2] @ make it so
mov r2, #0
nop
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
nop
loop:
subs r5, r5, #0x1 @ awake, wait just a bit

Просмотреть файл

@ -118,7 +118,8 @@ static void __init omap2_gp_clockevent_init(void)
clockevent_gpt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &clockevent_gpt);
clockevent_gpt.min_delta_ns =
clockevent_delta2ns(1, &clockevent_gpt);
clockevent_delta2ns(3, &clockevent_gpt);
/* Timer internal resynch latency. */
clockevent_gpt.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_gpt);

Просмотреть файл

@ -121,6 +121,16 @@ int __init pxa_init_dma(int num_ch)
if (dma_channels == NULL)
return -ENOMEM;
/* dma channel priorities on pxa2xx processors:
* ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
* ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
* ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
*/
for (i = 0; i < num_ch; i++) {
DCSR(i) = 0;
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
}
ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
@ -128,14 +138,6 @@ int __init pxa_init_dma(int num_ch)
return ret;
}
/* dma channel priorities on pxa2xx processors:
* ch 0 - 3, 16 - 19 <--> (0) DMA_PRIO_HIGH
* ch 4 - 7, 20 - 23 <--> (1) DMA_PRIO_MEDIUM
* ch 8 - 15, 24 - 31 <--> (2) DMA_PRIO_LOW
*/
for (i = 0; i < num_ch; i++)
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
num_dma_channels = num_ch;
return 0;
}

Просмотреть файл

@ -1,6 +1,8 @@
#ifndef __ASM_ARCH_REGS_AC97_H
#define __ASM_ARCH_REGS_AC97_H
#include <mach/hardware.h>
/*
* AC97 Controller registers
*/

Просмотреть файл

@ -41,6 +41,9 @@
#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
#endif
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_EDSS (1 << 20) /* Extended data size select */
#define SSCR0_NCS (1 << 21) /* Network clock select */
#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */

Просмотреть файл

@ -88,13 +88,13 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
static struct clk_lookup common_clkregs[] = {
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
};
static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
static struct clk_lookup pxa310_clkregs[] = {
INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
};
static int __init pxa300_init(void)

Просмотреть файл

@ -83,7 +83,7 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
static struct clk_lookup pxa320_clkregs[] = {
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
};
static int __init pxa320_init(void)

Просмотреть файл

@ -289,7 +289,7 @@ static struct platform_device sa11x0pcmcia_device = {
};
static struct platform_device sa11x0mtd_device = {
.name = "flash",
.name = "sa1100-mtd",
.id = -1,
};

Просмотреть файл

@ -66,7 +66,10 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
* fault (ie, is old), we can safely ignore any issues.
*/
if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
flush_cache_page(vma, address, pte_pfn(entry));
unsigned long pfn = pte_pfn(entry);
flush_cache_page(vma, address, pfn);
outer_flush_range((pfn << PAGE_SHIFT),
(pfn << PAGE_SHIFT) + PAGE_SIZE);
pte_val(entry) &= ~L_PTE_MT_MASK;
pte_val(entry) |= shared_pte_mask;
set_pte_at(vma->vm_mm, address, pte, entry);

Просмотреть файл

@ -200,14 +200,15 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
/*
* Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
*/
int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
unsigned int irq, struct omap_mmc_platform_data *data)
int __init omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data)
{
struct platform_device *pdev;
struct resource res[OMAP_MMC_NR_RES];
int ret;
pdev = platform_device_alloc("mmci-omap", id);
pdev = platform_device_alloc(name, id);
if (!pdev)
return -ENOMEM;

Просмотреть файл

@ -709,6 +709,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2()) {
@ -1888,11 +1889,11 @@ static int omap2_dma_handle_ch(int ch)
status = dma_read(CSR(ch));
}
dma_write(status, CSR(ch));
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
dma_write(status, CSR(ch));
return 0;
}

Просмотреть файл

@ -339,6 +339,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP3430_REV_ES2_0 0x34301034
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
/*
* omap_chip bits

Просмотреть файл

@ -344,7 +344,8 @@ struct omap_mcbsp_platform_data {
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
char const *clk_name;
char const **clk_names;
int num_clks;
};
struct omap_mcbsp {
@ -376,7 +377,8 @@ struct omap_mcbsp {
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *clk;
struct clk **clks;
int num_clks;
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;

Просмотреть файл

@ -115,8 +115,9 @@ void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
int omap_mmc_add(int id, unsigned long base, unsigned long size,
unsigned int irq, struct omap_mmc_platform_data *data);
int omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data);
#else
static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
@ -126,8 +127,9 @@ static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
}
static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
unsigned int irq, struct omap_mmc_platform_data *data)
static inline int omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data)
{
return 0;
}

Просмотреть файл

@ -214,6 +214,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
int i;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
@ -225,7 +226,8 @@ int omap_mcbsp_request(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
mcbsp->pdata->ops->request(id);
clk_enable(mcbsp->clk);
for (i = 0; i < mcbsp->num_clks; i++)
clk_enable(mcbsp->clks[i]);
spin_lock(&mcbsp->lock);
if (!mcbsp->free) {
@ -276,6 +278,7 @@ EXPORT_SYMBOL(omap_mcbsp_request);
void omap_mcbsp_free(unsigned int id)
{
struct omap_mcbsp *mcbsp;
int i;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@ -286,7 +289,8 @@ void omap_mcbsp_free(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
clk_disable(mcbsp->clk);
for (i = mcbsp->num_clks - 1; i >= 0; i--)
clk_disable(mcbsp->clks[i]);
spin_lock(&mcbsp->lock);
if (mcbsp->free) {
@ -872,6 +876,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
int i;
int ret = 0;
if (!pdata) {
@ -916,14 +921,25 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
mcbsp->dma_rx_sync = pdata->dma_rx_sync;
mcbsp->dma_tx_sync = pdata->dma_tx_sync;
if (pdata->clk_name)
mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
if (IS_ERR(mcbsp->clk)) {
dev_err(&pdev->dev,
"Invalid clock configuration for McBSP%d.\n",
mcbsp->id);
ret = PTR_ERR(mcbsp->clk);
goto err_clk;
if (pdata->num_clks) {
mcbsp->num_clks = pdata->num_clks;
mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
GFP_KERNEL);
if (!mcbsp->clks) {
ret = -ENOMEM;
goto exit;
}
for (i = 0; i < mcbsp->num_clks; i++) {
mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
if (IS_ERR(mcbsp->clks[i])) {
dev_err(&pdev->dev,
"Invalid %s configuration for McBSP%d.\n",
pdata->clk_names[i], mcbsp->id);
ret = PTR_ERR(mcbsp->clks[i]);
goto err_clk;
}
}
}
mcbsp->pdata = pdata;
@ -932,6 +948,9 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
return 0;
err_clk:
while (i--)
clk_put(mcbsp->clks[i]);
kfree(mcbsp->clks);
iounmap(mcbsp->io_base);
err_ioremap:
mcbsp->free = 0;
@ -942,6 +961,7 @@ exit:
static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
{
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
int i;
platform_set_drvdata(pdev, NULL);
if (mcbsp) {
@ -950,12 +970,18 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
clk_disable(mcbsp->clk);
clk_put(mcbsp->clk);
for (i = mcbsp->num_clks - 1; i >= 0; i--) {
clk_disable(mcbsp->clks[i]);
clk_put(mcbsp->clks[i]);
}
iounmap(mcbsp->io_base);
mcbsp->clk = NULL;
if (mcbsp->num_clks) {
kfree(mcbsp->clks);
mcbsp->clks = NULL;
mcbsp->num_clks = 0;
}
mcbsp->free = 0;
mcbsp->dev = NULL;
}

Просмотреть файл

@ -169,26 +169,51 @@ config BF542
help
BF542 Processor Support.
config BF542M
bool "BF542m"
help
BF542 Processor Support.
config BF544
bool "BF544"
help
BF544 Processor Support.
config BF544M
bool "BF544m"
help
BF544 Processor Support.
config BF547
bool "BF547"
help
BF547 Processor Support.
config BF547M
bool "BF547m"
help
BF547 Processor Support.
config BF548
bool "BF548"
help
BF548 Processor Support.
config BF548M
bool "BF548m"
help
BF548 Processor Support.
config BF549
bool "BF549"
help
BF549 Processor Support.
config BF549M
bool "BF549m"
help
BF549 Processor Support.
config BF561
bool "BF561"
help
@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0
config BF_REV_MIN
int
default 0 if (BF51x || BF52x || BF54x)
default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
default 2 if (BF537 || BF536 || BF534)
default 3 if (BF561 ||BF533 || BF532 || BF531)
default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
default 4 if (BF538 || BF539)
config BF_REV_MAX
int
default 2 if (BF51x || BF52x || BF54x)
default 3 if (BF537 || BF536 || BF534)
default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
default 3 if (BF537 || BF536 || BF534 || BF54xM)
default 5 if (BF561 || BF538 || BF539)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
default BF_REV_0_1 if (BF51x || BF52x || BF54x)
default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
default BF_REV_0_2 if (BF534 || BF536 || BF537)
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
config BF_REV_0_0
bool "0.0"
depends on (BF51x || BF52x || BF54x)
depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_1
bool "0.1"
depends on (BF52x || BF54x)
depends on (BF52x || (BF54x && !BF54xM))
config BF_REV_0_2
bool "0.2"
depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
config BF_REV_0_3
bool "0.3"
depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
config BF_REV_0_4
bool "0.4"
@ -293,9 +318,14 @@ config BF53x
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
config BF54xM
bool
depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
default y
config BF54x
bool
depends on (BF542 || BF544 || BF547 || BF548 || BF549)
depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
default y
config MEM_GENERIC_BOARD

Просмотреть файл

@ -21,57 +21,67 @@ KALLSYMS += --symbol-prefix=_
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
# setup the machine name and the machine dependent settings
machine-$(CONFIG_BF512) := bf518
machine-$(CONFIG_BF514) := bf518
machine-$(CONFIG_BF516) := bf518
machine-$(CONFIG_BF518) := bf518
machine-$(CONFIG_BF522) := bf527
machine-$(CONFIG_BF523) := bf527
machine-$(CONFIG_BF524) := bf527
machine-$(CONFIG_BF525) := bf527
machine-$(CONFIG_BF526) := bf527
machine-$(CONFIG_BF527) := bf527
machine-$(CONFIG_BF531) := bf533
machine-$(CONFIG_BF532) := bf533
machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF538) := bf538
machine-$(CONFIG_BF539) := bf538
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF547) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
machine-$(CONFIG_BF512) := bf518
machine-$(CONFIG_BF514) := bf518
machine-$(CONFIG_BF516) := bf518
machine-$(CONFIG_BF518) := bf518
machine-$(CONFIG_BF522) := bf527
machine-$(CONFIG_BF523) := bf527
machine-$(CONFIG_BF524) := bf527
machine-$(CONFIG_BF525) := bf527
machine-$(CONFIG_BF526) := bf527
machine-$(CONFIG_BF527) := bf527
machine-$(CONFIG_BF531) := bf533
machine-$(CONFIG_BF532) := bf533
machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF538) := bf538
machine-$(CONFIG_BF539) := bf538
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF542M) := bf548
machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF544M) := bf548
machine-$(CONFIG_BF547) := bf548
machine-$(CONFIG_BF547M) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF548M) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF549M) := bf548
machine-$(CONFIG_BF561) := bf561
MACHINE := $(machine-y)
export MACHINE
cpu-$(CONFIG_BF512) := bf512
cpu-$(CONFIG_BF514) := bf514
cpu-$(CONFIG_BF516) := bf516
cpu-$(CONFIG_BF518) := bf518
cpu-$(CONFIG_BF522) := bf522
cpu-$(CONFIG_BF523) := bf523
cpu-$(CONFIG_BF524) := bf524
cpu-$(CONFIG_BF525) := bf525
cpu-$(CONFIG_BF526) := bf526
cpu-$(CONFIG_BF527) := bf527
cpu-$(CONFIG_BF531) := bf531
cpu-$(CONFIG_BF532) := bf532
cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF538) := bf538
cpu-$(CONFIG_BF539) := bf539
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF547) := bf547
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561
cpu-$(CONFIG_BF512) := bf512
cpu-$(CONFIG_BF514) := bf514
cpu-$(CONFIG_BF516) := bf516
cpu-$(CONFIG_BF518) := bf518
cpu-$(CONFIG_BF522) := bf522
cpu-$(CONFIG_BF523) := bf523
cpu-$(CONFIG_BF524) := bf524
cpu-$(CONFIG_BF525) := bf525
cpu-$(CONFIG_BF526) := bf526
cpu-$(CONFIG_BF527) := bf527
cpu-$(CONFIG_BF531) := bf531
cpu-$(CONFIG_BF532) := bf532
cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF538) := bf538
cpu-$(CONFIG_BF539) := bf539
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF542M) := bf542m
cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF544M) := bf544m
cpu-$(CONFIG_BF547) := bf547
cpu-$(CONFIG_BF547M) := bf547m
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF548M) := bf548m
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF549M) := bf549m
cpu-$(CONFIG_BF561) := bf561
rev-$(CONFIG_BF_REV_0_0) := 0.0
rev-$(CONFIG_BF_REV_0_1) := 0.1

Просмотреть файл

@ -1,6 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
# Fri Jan 9 17:58:41 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF51x=y
CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_BFIN518F_EZBRD=y
#
@ -598,7 +600,10 @@ CONFIG_PHYLIB=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_BFIN_MAC is not set
CONFIG_BFIN_MAC=y
CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_BFIN_MAC_RMII is not set
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#

Просмотреть файл

@ -1,7 +1,6 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24.7
# Fri Jul 18 18:00:41 2008
# Linux kernel version: 2.6.28
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
@ -32,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@ -52,26 +48,35 @@ CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@ -82,6 +87,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@ -95,9 +101,11 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_FREEZER is not set
#
# Blackfin Processor Options
@ -106,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
#
# Processor and Board Settings
#
# CONFIG_BF512 is not set
# CONFIG_BF514 is not set
# CONFIG_BF516 is not set
# CONFIG_BF518 is not set
# CONFIG_BF522 is not set
# CONFIG_BF523 is not set
# CONFIG_BF524 is not set
@ -118,48 +130,32 @@ CONFIG_BF527=y
# CONFIG_BF534 is not set
# CONFIG_BF536 is not set
# CONFIG_BF537 is not set
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
# CONFIG_BF_REV_0_6 is not set
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
CONFIG_MEM_MT48LC16M16A2TG_75=y
# CONFIG_BFIN527_EZKIT is not set
CONFIG_BFIN527_BLUETECHNIX_CM=y
#
# BF527 Specific Configuration
#
#
# Alternative Multiplexing Scheme
#
# CONFIG_BF527_SPORT0_PORTF is not set
CONFIG_BF527_SPORT0_PORTG=y
CONFIG_BF527_SPORT0_TSCLK_PG10=y
# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
CONFIG_BF527_UART1_PORTF=y
# CONFIG_BF527_UART1_PORTG is not set
# CONFIG_BF527_NAND_D_PORTF is not set
CONFIG_BF527_NAND_D_PORTH=y
#
# Interrupt Priority Assignment
#
#
# Priority
#
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_DMA0_ERROR=7
CONFIG_IRQ_DMAR0_BLK=7
@ -179,7 +175,6 @@ CONFIG_IRQ_SPORT0_TX=9
CONFIG_IRQ_SPORT1_RX=9
CONFIG_IRQ_SPORT1_TX=9
CONFIG_IRQ_TWI=10
CONFIG_IRQ_SPI=10
CONFIG_IRQ_UART0_RX=10
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
@ -205,6 +200,34 @@ CONFIG_IRQ_MEM_DMA1=13
CONFIG_IRQ_WATCH=13
CONFIG_IRQ_PORTF_INTA=13
CONFIG_IRQ_PORTF_INTB=13
# CONFIG_BFIN527_EZKIT is not set
CONFIG_BFIN527_BLUETECHNIX_CM=y
# CONFIG_BFIN526_EZBRD is not set
#
# BF527 Specific Configuration
#
#
# Alternative Multiplexing Scheme
#
# CONFIG_BF527_SPORT0_PORTF is not set
CONFIG_BF527_SPORT0_PORTG=y
CONFIG_BF527_SPORT0_TSCLK_PG10=y
# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
CONFIG_BF527_UART1_PORTF=y
# CONFIG_BF527_UART1_PORTG is not set
# CONFIG_BF527_NAND_D_PORTF is not set
CONFIG_BF527_NAND_D_PORTH=y
#
# Interrupt Priority Assignment
#
#
# Priority
#
CONFIG_IRQ_SPI=10
CONFIG_IRQ_SPI_ERROR=7
CONFIG_IRQ_NFC_ERROR=7
CONFIG_IRQ_HDMA_ERROR=7
@ -226,7 +249,6 @@ CONFIG_BOOT_LOAD=0x1000
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
@ -240,10 +262,10 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@ -277,6 +299,12 @@ CONFIG_ACCESS_OK_L1=y
CONFIG_CACHELINE_ALIGNED_L1=y
# CONFIG_SYSCALL_TAB_L1 is not set
# CONFIG_CPLB_SWITCH_TAB_L1 is not set
CONFIG_APP_STACK_L1=y
#
# Speed Optimizations
#
CONFIG_BFIN_INS_LOWOVERHEAD=y
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
@ -285,10 +313,10 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_BFIN_GPTIMERS=y
@ -334,7 +362,6 @@ CONFIG_BANK_3=0xFFC0
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
@ -345,25 +372,20 @@ CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
# CONFIG_PM_BFIN_SLEEP is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Networking
#
CONFIG_NET=y
#
@ -376,6 +398,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@ -405,8 +428,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@ -415,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@ -431,14 +453,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
@ -456,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@ -464,6 +488,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -507,6 +532,7 @@ CONFIG_MTD_ROM=m
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@ -542,10 +568,12 @@ CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@ -558,7 +586,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -579,6 +606,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@ -591,11 +619,14 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@ -604,6 +635,7 @@ CONFIG_BFIN_MAC_RMII=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@ -616,7 +648,6 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -642,14 +673,15 @@ CONFIG_BFIN_MAC_RMII=y
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
CONFIG_BFIN_OTP=y
# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
# CONFIG_BF5xx_EPPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -673,6 +705,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_OTP=y
# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
#
# CAN, the car bus and industrial fieldbus
@ -680,44 +714,49 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_CAN4LINUX is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
@ -726,37 +765,41 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BITBANG is not set
#
# SPI Protocol Masters
#
# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@ -777,6 +820,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
@ -785,6 +829,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@ -792,9 +837,12 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -809,22 +857,32 @@ CONFIG_BFIN_WDT=y
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -839,10 +897,6 @@ CONFIG_SSB_POSSIBLE=y
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@ -850,6 +904,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@ -860,40 +915,48 @@ CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB support
# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_MUSB_LOGLEVEL=0
CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# may also be needed; see USB_STORAGE Help for more information
# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
@ -901,15 +964,10 @@ CONFIG_USB_MUSB_LOGLEVEL=0
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
@ -918,7 +976,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@ -934,17 +992,13 @@ CONFIG_USB_MON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -973,51 +1027,59 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_BFIN=y
#
# Userspace I/O
#
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@ -1059,8 +1121,11 @@ CONFIG_SYSFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@ -1068,13 +1133,12 @@ CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@ -1130,7 +1194,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@ -1138,14 +1201,61 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@ -1154,7 +1264,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_CPLB_INFO is not set
CONFIG_ACCESS_CHECK=y
@ -1163,10 +1273,96 @@ CONFIG_ACCESS_CHECK=y
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
@ -1174,6 +1370,7 @@ CONFIG_SECURITY=y
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set

Просмотреть файл

@ -63,23 +63,23 @@ static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
unsigned int carry;
__asm__ ("%0 = %0 + %1;\n\t"
"CC = AC0;\n\t"
"if !CC jump 4;\n\t"
"%0 = %0 + %4;\n\t"
"%0 = %0 + %2;\n\t"
"CC = AC0;\n\t"
"if !CC jump 4;\n\t"
"%0 = %0 + %4;\n\t"
"%0 = %0 + %3;\n\t"
"CC = AC0;\n\t"
"if !CC jump 4;\n\t"
"%0 = %0 + %4;\n\t"
"NOP;\n\t"
: "=d" (sum)
: "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
: "CC");
__asm__ ("%0 = %0 + %2;\n\t"
"CC = AC0;\n\t"
"%1 = CC;\n\t"
"%0 = %0 + %1;\n\t"
"%0 = %0 + %3;\n\t"
"CC = AC0;\n\t"
"%1 = CC;\n\t"
"%0 = %0 + %1;\n\t"
"%0 = %0 + %4;\n\t"
"CC = AC0;\n\t"
"%1 = CC;\n\t"
"%0 = %0 + %1;\n\t"
: "=d" (sum), "=&d" (carry)
: "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
: "CC");
return (sum);
}

Просмотреть файл

@ -13,29 +13,7 @@
static inline void __delay(unsigned long loops)
{
if (ANOMALY_05000312) {
/* Interrupted loads to loop registers -> bad */
unsigned long tmp;
__asm__ __volatile__(
"[--SP] = LC0;"
"[--SP] = LT0;"
"[--SP] = LB0;"
"LSETUP (1f,1f) LC0 = %1;"
"1: NOP;"
/* We take advantage of the fact that LC0 is 0 at
* the end of the loop. Otherwise we'd need some
* NOPs after the CLI here.
*/
"CLI %0;"
"LB0 = [SP++];"
"LT0 = [SP++];"
"LC0 = [SP++];"
"STI %0;"
: "=d" (tmp)
: "a" (loops)
);
} else
__asm__ __volatile__ (
__asm__ __volatile__ (
"LSETUP(1f, 1f) LC0 = %0;"
"1: NOP;"
:
@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops)
#include <linux/param.h> /* needed for HZ */
/*
* Use only for very small delays ( < 1 msec). Should probably use a
* lookup table, really, as the multiplications take much too long with
* short delays. This is a "reasonable" implementation, though (and the
* first constant multiplications gets optimized away if the delay is
* a constant)
* close approximation borrowed from m68knommu to avoid 64-bit math
*/
#define HZSCALE (268435456 / (1000000/HZ))
static inline void udelay(unsigned long usecs)
{
extern unsigned long loops_per_jiffy;
__delay(usecs * loops_per_jiffy / (1000000 / HZ));
__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
}
#endif

Просмотреть файл

@ -27,60 +27,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Number BF537/6/4 BF561 BF533/2/1
* BF527/5/2
*
* GPIO_0 PF0 PF0 PF0
* GPIO_1 PF1 PF1 PF1
* GPIO_2 PF2 PF2 PF2
* GPIO_3 PF3 PF3 PF3
* GPIO_4 PF4 PF4 PF4
* GPIO_5 PF5 PF5 PF5
* GPIO_6 PF6 PF6 PF6
* GPIO_7 PF7 PF7 PF7
* GPIO_8 PF8 PF8 PF8
* GPIO_9 PF9 PF9 PF9
* GPIO_10 PF10 PF10 PF10
* GPIO_11 PF11 PF11 PF11
* GPIO_12 PF12 PF12 PF12
* GPIO_13 PF13 PF13 PF13
* GPIO_14 PF14 PF14 PF14
* GPIO_15 PF15 PF15 PF15
* GPIO_16 PG0 PF16
* GPIO_17 PG1 PF17
* GPIO_18 PG2 PF18
* GPIO_19 PG3 PF19
* GPIO_20 PG4 PF20
* GPIO_21 PG5 PF21
* GPIO_22 PG6 PF22
* GPIO_23 PG7 PF23
* GPIO_24 PG8 PF24
* GPIO_25 PG9 PF25
* GPIO_26 PG10 PF26
* GPIO_27 PG11 PF27
* GPIO_28 PG12 PF28
* GPIO_29 PG13 PF29
* GPIO_30 PG14 PF30
* GPIO_31 PG15 PF31
* GPIO_32 PH0 PF32
* GPIO_33 PH1 PF33
* GPIO_34 PH2 PF34
* GPIO_35 PH3 PF35
* GPIO_36 PH4 PF36
* GPIO_37 PH5 PF37
* GPIO_38 PH6 PF38
* GPIO_39 PH7 PF39
* GPIO_40 PH8 PF40
* GPIO_41 PH9 PF41
* GPIO_42 PH10 PF42
* GPIO_43 PH11 PF43
* GPIO_44 PH12 PF44
* GPIO_45 PH13 PF45
* GPIO_46 PH14 PF46
* GPIO_47 PH15 PF47
*/
#ifndef __ARCH_BLACKFIN_GPIO_H__
#define __ARCH_BLACKFIN_GPIO_H__
@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
int bfin_gpio_get_value(unsigned gpio);
void bfin_gpio_set_value(unsigned gpio, int value);
#ifndef BF548_FAMILY
#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value)
#endif
#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h> /* cansleep wrappers */

Просмотреть файл

@ -1,32 +1,8 @@
/*
* File: include/asm-blackfin/kgdb.h
* Based on:
* Author: Sonic Zhang
/* Blackfin KGDB header
*
* Created:
* Description:
* Copyright 2005-2009 Analog Devices Inc.
*
* Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
*
* Modified:
* Copyright 2005-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* Licensed under the GPL-2 or later.
*/
#ifndef __ASM_BLACKFIN_KGDB_H__
@ -37,17 +13,18 @@
/* gdb locks */
#define KGDB_MAX_NO_CPUS 8
/************************************************************************/
/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
/* at least NUMREGBYTES*2 are needed for register packets */
/* Longer buffer is needed to list all threads */
/*
* BUFMAX defines the maximum number of characters in inbound/outbound buffers.
* At least NUMREGBYTES*2 are needed for register packets.
* Longer buffer is needed to list all threads.
*/
#define BUFMAX 2048
/*
* Note that this register image is different from
* the register image that Linux produces at interrupt time.
*
* Linux's register image is defined by struct pt_regs in ptrace.h.
* Note that this register image is different from
* the register image that Linux produces at interrupt time.
*
* Linux's register image is defined by struct pt_regs in ptrace.h.
*/
enum regnames {
/* Core Registers */
@ -104,14 +81,14 @@ enum regnames {
BFIN_RETX,
BFIN_RETN,
BFIN_RETE,
/* Pseudo Registers */
BFIN_PC,
BFIN_CC,
BFIN_EXTRA1, /* Address of .text section. */
BFIN_EXTRA2, /* Address of .data section. */
BFIN_EXTRA3, /* Address of .bss section. */
BFIN_FDPIC_EXEC,
BFIN_FDPIC_EXEC,
BFIN_FDPIC_INTERP,
/* MMRs */
@ -126,7 +103,7 @@ enum regnames {
static inline void arch_kgdb_breakpoint(void)
{
asm(" EXCPT 2;");
asm("EXCPT 2;");
}
#define BREAK_INSTR_SIZE 2
#define CACHE_FLUSH_IS_SAFE 1

Просмотреть файл

@ -115,7 +115,7 @@
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
/* Enable SCLK Out */
#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
#else
#define mem_SDRRC CONFIG_MEM_SDRRC
#define mem_SDGCTL CONFIG_MEM_SDGCTL

Просмотреть файл

@ -59,6 +59,7 @@ struct blackfin_pda { /* Per-processor Data Area */
unsigned long icplb_fault_addr;
unsigned long retx;
unsigned long seqstat;
unsigned int __nmi_count; /* number of times NMI asserted on this CPU */
};
extern struct blackfin_pda cpu_pda[];

Просмотреть файл

@ -15,6 +15,6 @@ extern void native_machine_halt(void);
extern void native_machine_power_off(void);
/* common reboot workarounds */
extern void bfin_gpio_reset_spi0_ssel1(void);
extern void bfin_reset_boot_spi_cs(unsigned short pin);
#endif

Просмотреть файл

@ -15,6 +15,8 @@ else
obj-y += time.o
endif
CFLAGS_kgdb_test.o := -mlong-calls -O0
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o

Просмотреть файл

@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u
spin_lock_irqsave(&mdma_lock, flags);
/* Force a sync in case a previous config reset on this channel
* occurred. This is needed so subsequent writes to DMA registers
* are not spuriously lost/corrupted. Do it under irq lock and
* without the anomaly version (because we are atomic already).
*/
__builtin_bfin_ssync();
if (bfin_read_MDMA_S0_CONFIG())
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
continue;

Просмотреть файл

@ -27,59 +27,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2
*
* GPIO_0 PF0 PF0 PF0 PA0...PJ13
* GPIO_1 PF1 PF1 PF1
* GPIO_2 PF2 PF2 PF2
* GPIO_3 PF3 PF3 PF3
* GPIO_4 PF4 PF4 PF4
* GPIO_5 PF5 PF5 PF5
* GPIO_6 PF6 PF6 PF6
* GPIO_7 PF7 PF7 PF7
* GPIO_8 PF8 PF8 PF8
* GPIO_9 PF9 PF9 PF9
* GPIO_10 PF10 PF10 PF10
* GPIO_11 PF11 PF11 PF11
* GPIO_12 PF12 PF12 PF12
* GPIO_13 PF13 PF13 PF13
* GPIO_14 PF14 PF14 PF14
* GPIO_15 PF15 PF15 PF15
* GPIO_16 PG0 PF16
* GPIO_17 PG1 PF17
* GPIO_18 PG2 PF18
* GPIO_19 PG3 PF19
* GPIO_20 PG4 PF20
* GPIO_21 PG5 PF21
* GPIO_22 PG6 PF22
* GPIO_23 PG7 PF23
* GPIO_24 PG8 PF24
* GPIO_25 PG9 PF25
* GPIO_26 PG10 PF26
* GPIO_27 PG11 PF27
* GPIO_28 PG12 PF28
* GPIO_29 PG13 PF29
* GPIO_30 PG14 PF30
* GPIO_31 PG15 PF31
* GPIO_32 PH0 PF32
* GPIO_33 PH1 PF33
* GPIO_34 PH2 PF34
* GPIO_35 PH3 PF35
* GPIO_36 PH4 PF36
* GPIO_37 PH5 PF37
* GPIO_38 PH6 PF38
* GPIO_39 PH7 PF39
* GPIO_40 PH8 PF40
* GPIO_41 PH9 PF41
* GPIO_42 PH10 PF42
* GPIO_43 PH11 PF43
* GPIO_44 PH12 PF44
* GPIO_45 PH13 PF45
* GPIO_46 PH14 PF46
* GPIO_47 PH15 PF47
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/err.h>
@ -119,51 +66,18 @@ enum {
#define AWA_DUMMY_READ(...) do { } while (0)
#endif
static struct gpio_port_t * const gpio_array[] = {
#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
static struct gpio_port_t *gpio_bankb[] = {
(struct gpio_port_t *) FIO_FLAG_D,
};
#endif
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
static struct gpio_port_t *gpio_bankb[] = {
#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
(struct gpio_port_t *) PORTFIO,
(struct gpio_port_t *) PORTGIO,
(struct gpio_port_t *) PORTHIO,
};
static unsigned short *port_fer[] = {
(unsigned short *) PORTF_FER,
(unsigned short *) PORTG_FER,
(unsigned short *) PORTH_FER,
};
#endif
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
static unsigned short *port_mux[] = {
(unsigned short *) PORTF_MUX,
(unsigned short *) PORTG_MUX,
(unsigned short *) PORTH_MUX,
};
static const
u8 pmux_offset[][16] =
{{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
};
#endif
#ifdef BF561_FAMILY
static struct gpio_port_t *gpio_bankb[] = {
#elif defined(BF561_FAMILY)
(struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D,
};
#endif
#ifdef BF548_FAMILY
static struct gpio_port_t *gpio_array[] = {
#elif defined(BF548_FAMILY)
(struct gpio_port_t *)PORTA_FER,
(struct gpio_port_t *)PORTB_FER,
(struct gpio_port_t *)PORTC_FER,
@ -174,7 +88,39 @@ static struct gpio_port_t *gpio_array[] = {
(struct gpio_port_t *)PORTH_FER,
(struct gpio_port_t *)PORTI_FER,
(struct gpio_port_t *)PORTJ_FER,
#else
# error no gpio arrays defined
#endif
};
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
static unsigned short * const port_fer[] = {
(unsigned short *) PORTF_FER,
(unsigned short *) PORTG_FER,
(unsigned short *) PORTH_FER,
};
# if !defined(BF537_FAMILY)
static unsigned short * const port_mux[] = {
(unsigned short *) PORTF_MUX,
(unsigned short *) PORTG_MUX,
(unsigned short *) PORTH_MUX,
};
static const
u8 pmux_offset[][16] = {
# if defined(BF527_FAMILY)
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
{ 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
# elif defined(BF518_FAMILY)
{ 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
{ 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
{ 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
# endif
};
# endif
#endif
static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
@ -188,35 +134,9 @@ static struct str_ident {
} str_ident[MAX_RESOURCES];
#if defined(CONFIG_PM)
#if defined(CONFIG_BF54x)
static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
#else
static unsigned short wakeup_map[GPIO_BANK_NUM];
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
#ifdef BF533_FAMILY
static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB};
#endif
#ifdef BF537_FAMILY
static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
#endif
#ifdef BF538_FAMILY
static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB};
#endif
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB};
#endif
#ifdef BF561_FAMILY
static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
#endif
#endif
#endif /* CONFIG_PM */
inline int check_gpio(unsigned gpio)
{
#if defined(BF548_FAMILY)
@ -330,9 +250,10 @@ static struct {
{.res = P_SPI0_SSEL3, .offset = 0},
};
static void portmux_setup(unsigned short per, unsigned short function)
static void portmux_setup(unsigned short per)
{
u16 y, offset, muxreg;
u16 function = P_FUNCT2MUX(per);
for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
if (port_mux_lut[y].res == per) {
@ -353,30 +274,33 @@ static void portmux_setup(unsigned short per, unsigned short function)
}
}
#elif defined(BF548_FAMILY)
inline void portmux_setup(unsigned short portno, unsigned short function)
inline void portmux_setup(unsigned short per)
{
u32 pmux;
u16 ident = P_IDENT(per);
u16 function = P_FUNCT2MUX(per);
pmux = gpio_array[gpio_bank(portno)]->port_mux;
pmux = gpio_array[gpio_bank(ident)]->port_mux;
pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
gpio_array[gpio_bank(portno)]->port_mux = pmux;
gpio_array[gpio_bank(ident)]->port_mux = pmux;
}
inline u16 get_portmux(unsigned short portno)
inline u16 get_portmux(unsigned short per)
{
u32 pmux;
u16 ident = P_IDENT(per);
pmux = gpio_array[gpio_bank(portno)]->port_mux;
pmux = gpio_array[gpio_bank(ident)]->port_mux;
return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
}
#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
inline void portmux_setup(unsigned short portno, unsigned short function)
inline void portmux_setup(unsigned short per)
{
u16 pmux, ident = P_IDENT(portno);
u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
pmux = *port_mux[gpio_bank(ident)];
@ -424,90 +348,71 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
unsigned long flags; \
local_irq_save_hw(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
else \
gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
SET_GPIO(dir)
SET_GPIO(inen)
SET_GPIO(polar)
SET_GPIO(edge)
SET_GPIO(both)
SET_GPIO(dir) /* set_gpio_dir() */
SET_GPIO(inen) /* set_gpio_inen() */
SET_GPIO(polar) /* set_gpio_polar() */
SET_GPIO(edge) /* set_gpio_edge() */
SET_GPIO(both) /* set_gpio_both() */
#if ANOMALY_05000311 || ANOMALY_05000323
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
local_irq_save_hw(flags); \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save_hw(flags); \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
} \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
#else
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
{ \
if (arg) \
gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
#endif
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
SET_GPIO_SC(data)
#if ANOMALY_05000311 || ANOMALY_05000323
void set_gpio_toggle(unsigned gpio)
{
unsigned long flags;
local_irq_save_hw(flags);
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
AWA_DUMMY_READ(toggle);
local_irq_restore_hw(flags);
if (ANOMALY_05000311 || ANOMALY_05000323)
local_irq_save_hw(flags);
gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
if (ANOMALY_05000311 || ANOMALY_05000323) {
AWA_DUMMY_READ(toggle);
local_irq_restore_hw(flags);
}
}
#else
void set_gpio_toggle(unsigned gpio)
{
gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
}
#endif
EXPORT_SYMBOL(set_gpio_toggle);
/*Set current PORT date (16-bit word)*/
#if ANOMALY_05000311 || ANOMALY_05000323
#define SET_GPIO_P(name) \
void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
local_irq_save_hw(flags); \
gpio_bankb[gpio_bank(gpio)]->name = arg; \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save_hw(flags); \
gpio_array[gpio_bank(gpio)]->name = arg; \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
} \
} \
EXPORT_SYMBOL(set_gpiop_ ## name);
#else
#define SET_GPIO_P(name) \
void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
{ \
gpio_bankb[gpio_bank(gpio)]->name = arg; \
} \
EXPORT_SYMBOL(set_gpiop_ ## name);
#endif
SET_GPIO_P(data)
SET_GPIO_P(dir)
@ -519,27 +424,21 @@ SET_GPIO_P(maska)
SET_GPIO_P(maskb)
/* Get a specific bit */
#if ANOMALY_05000311 || ANOMALY_05000323
#define GET_GPIO(name) \
unsigned short get_gpio_ ## name(unsigned gpio) \
{ \
unsigned long flags; \
unsigned short ret; \
local_irq_save_hw(flags); \
ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save_hw(flags); \
ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
} \
return ret; \
} \
EXPORT_SYMBOL(get_gpio_ ## name);
#else
#define GET_GPIO(name) \
unsigned short get_gpio_ ## name(unsigned gpio) \
{ \
return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
} \
EXPORT_SYMBOL(get_gpio_ ## name);
#endif
GET_GPIO(data)
GET_GPIO(dir)
@ -552,27 +451,21 @@ GET_GPIO(maskb)
/*Get current PORT date (16-bit word)*/
#if ANOMALY_05000311 || ANOMALY_05000323
#define GET_GPIO_P(name) \
unsigned short get_gpiop_ ## name(unsigned gpio) \
{ \
unsigned long flags; \
unsigned short ret; \
local_irq_save_hw(flags); \
ret = (gpio_bankb[gpio_bank(gpio)]->name); \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
if (ANOMALY_05000311 || ANOMALY_05000323) \
local_irq_save_hw(flags); \
ret = (gpio_array[gpio_bank(gpio)]->name); \
if (ANOMALY_05000311 || ANOMALY_05000323) { \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
} \
return ret; \
} \
EXPORT_SYMBOL(get_gpiop_ ## name);
#else
#define GET_GPIO_P(name) \
unsigned short get_gpiop_ ## name(unsigned gpio) \
{ \
return (gpio_bankb[gpio_bank(gpio)]->name);\
} \
EXPORT_SYMBOL(get_gpiop_ ## name);
#endif
GET_GPIO_P(data)
GET_GPIO_P(dir)
@ -585,6 +478,26 @@ GET_GPIO_P(maskb)
#ifdef CONFIG_PM
static unsigned short wakeup_map[GPIO_BANK_NUM];
static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
static const unsigned int sic_iwr_irqs[] = {
#if defined(BF533_FAMILY)
IRQ_PROG_INTB
#elif defined(BF537_FAMILY)
IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
#elif defined(BF538_FAMILY)
IRQ_PORTF_INTB
#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
#elif defined(BF561_FAMILY)
IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
#else
# error no SIC_IWR defined
#endif
};
/***********************************************************
*
* FUNCTIONS: Blackfin PM Setup API
@ -669,18 +582,18 @@ u32 bfin_pm_standby_setup(void)
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
gpio_bankb[bank]->maskb = 0;
gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
gpio_array[bank]->maskb = 0;
if (mask) {
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].fer = *port_fer[bank];
#endif
gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
gpio_bank_saved[bank].dir = gpio_array[bank]->dir;
gpio_bank_saved[bank].edge = gpio_array[bank]->edge;
gpio_bank_saved[bank].both = gpio_array[bank]->both;
gpio_bank_saved[bank].reserved =
reserved_gpio_map[bank];
@ -700,7 +613,7 @@ u32 bfin_pm_standby_setup(void)
}
bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
}
}
@ -721,18 +634,18 @@ void bfin_pm_standby_restore(void)
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
gpio_array[bank]->both = gpio_bank_saved[bank].both;
reserved_gpio_map[bank] =
gpio_bank_saved[bank].reserved;
bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
}
gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
}
AWA_DUMMY_READ(maskb);
}
@ -745,21 +658,21 @@ void bfin_gpio_pm_hibernate_suspend(void)
bank = gpio_bank(i);
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].fer = *port_fer[bank];
gpio_bank_saved[bank].fer = *port_fer[bank];
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].mux = *port_mux[bank];
gpio_bank_saved[bank].mux = *port_mux[bank];
#else
if (bank == 0)
gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
if (bank == 0)
gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
#endif
#endif
gpio_bank_saved[bank].data = gpio_bankb[bank]->data;
gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska;
gpio_bank_saved[bank].data = gpio_array[bank]->data;
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
gpio_bank_saved[bank].dir = gpio_array[bank]->dir;
gpio_bank_saved[bank].edge = gpio_array[bank]->edge;
gpio_bank_saved[bank].both = gpio_array[bank]->both;
gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
}
AWA_DUMMY_READ(maska);
@ -770,27 +683,27 @@ void bfin_gpio_pm_hibernate_restore(void)
int i, bank;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
bank = gpio_bank(i);
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
*port_mux[bank] = gpio_bank_saved[bank].mux;
*port_mux[bank] = gpio_bank_saved[bank].mux;
#else
if (bank == 0)
bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
if (bank == 0)
bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
#endif
*port_fer[bank] = gpio_bank_saved[bank].fer;
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
gpio_array[bank]->both = gpio_bank_saved[bank].both;
gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
| gpio_bank_saved[bank].dir;
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
| gpio_bank_saved[bank].dir;
gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
}
AWA_DUMMY_READ(maska);
}
@ -817,12 +730,12 @@ void bfin_gpio_pm_hibernate_suspend(void)
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
gpio_bank_saved[bank].data = gpio_array[bank]->port_data;
gpio_bank_saved[bank].data = gpio_array[bank]->port_data;
gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen;
gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set;
gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
gpio_bank_saved[bank].data = gpio_array[bank]->data;
gpio_bank_saved[bank].data = gpio_array[bank]->data;
gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
}
}
@ -831,21 +744,21 @@ void bfin_gpio_pm_hibernate_restore(void)
int i, bank;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
bank = gpio_bank(i);
gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir;
gpio_array[bank]->port_set = gpio_bank_saved[bank].data
| gpio_bank_saved[bank].dir;
gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
| gpio_bank_saved[bank].dir;
}
}
#endif
unsigned short get_gpio_dir(unsigned gpio)
{
return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio)));
return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
}
EXPORT_SYMBOL(get_gpio_dir);
@ -905,9 +818,7 @@ int peripheral_request(unsigned short per, const char *label)
*/
#ifdef BF548_FAMILY
u16 funct = get_portmux(ident);
if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
#else
if (!(per & P_MAYSHARE)) {
#endif
@ -931,11 +842,7 @@ int peripheral_request(unsigned short per, const char *label)
anyway:
reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
#ifdef BF548_FAMILY
portmux_setup(ident, P_FUNCT2MUX(per));
#else
portmux_setup(per, P_FUNCT2MUX(per));
#endif
portmux_setup(per);
port_setup(ident, PERIPHERAL_USAGE);
local_irq_restore_hw(flags);
@ -977,9 +884,6 @@ void peripheral_free(unsigned short per)
if (!(per & P_DEFINED))
return;
if (check_gpio(ident) < 0)
return;
local_irq_save_hw(flags);
if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
@ -1056,9 +960,15 @@ int bfin_gpio_request(unsigned gpio, const char *label)
local_irq_restore_hw(flags);
return -EBUSY;
}
if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))
if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
" (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
}
#ifndef BF548_FAMILY
else { /* Reset POLAR setting when acquiring a gpio for the first time */
set_gpio_polar(gpio, 0);
}
#endif
reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
set_label(gpio, label);
@ -1078,6 +988,8 @@ void bfin_gpio_free(unsigned gpio)
if (check_gpio(gpio) < 0)
return;
might_sleep();
local_irq_save_hw(flags);
if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
@ -1158,92 +1070,15 @@ void bfin_gpio_irq_free(unsigned gpio)
local_irq_restore_hw(flags);
}
static inline void __bfin_gpio_direction_input(unsigned gpio)
{
#ifdef BF548_FAMILY
int bfin_gpio_direction_input(unsigned gpio)
{
unsigned long flags;
if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
gpio_error(gpio);
return -EINVAL;
}
local_irq_save_hw(flags);
gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
local_irq_restore_hw(flags);
return 0;
}
EXPORT_SYMBOL(bfin_gpio_direction_input);
int bfin_gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
gpio_error(gpio);
return -EINVAL;
}
local_irq_save_hw(flags);
gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
gpio_set_value(gpio, value);
gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
local_irq_restore_hw(flags);
return 0;
}
EXPORT_SYMBOL(bfin_gpio_direction_output);
void bfin_gpio_set_value(unsigned gpio, int arg)
{
if (arg)
gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
else
gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
}
EXPORT_SYMBOL(bfin_gpio_set_value);
int bfin_gpio_get_value(unsigned gpio)
{
return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
}
EXPORT_SYMBOL(bfin_gpio_get_value);
void bfin_gpio_irq_prepare(unsigned gpio)
{
unsigned long flags;
port_setup(gpio, GPIO_USAGE);
local_irq_save_hw(flags);
gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
local_irq_restore_hw(flags);
}
gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
#else
int bfin_gpio_get_value(unsigned gpio)
{
unsigned long flags;
int ret;
if (unlikely(get_gpio_edge(gpio))) {
local_irq_save_hw(flags);
set_gpio_edge(gpio, 0);
ret = get_gpio_data(gpio);
set_gpio_edge(gpio, 1);
local_irq_restore_hw(flags);
return ret;
} else
return get_gpio_data(gpio);
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
#endif
gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
}
EXPORT_SYMBOL(bfin_gpio_get_value);
int bfin_gpio_direction_input(unsigned gpio)
{
@ -1255,8 +1090,7 @@ int bfin_gpio_direction_input(unsigned gpio)
}
local_irq_save_hw(flags);
gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
__bfin_gpio_direction_input(gpio);
AWA_DUMMY_READ(inen);
local_irq_restore_hw(flags);
@ -1264,6 +1098,30 @@ int bfin_gpio_direction_input(unsigned gpio)
}
EXPORT_SYMBOL(bfin_gpio_direction_input);
void bfin_gpio_irq_prepare(unsigned gpio)
{
#ifdef BF548_FAMILY
unsigned long flags;
#endif
port_setup(gpio, GPIO_USAGE);
#ifdef BF548_FAMILY
local_irq_save_hw(flags);
__bfin_gpio_direction_input(gpio);
local_irq_restore_hw(flags);
#endif
}
void bfin_gpio_set_value(unsigned gpio, int arg)
{
if (arg)
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
else
gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
}
EXPORT_SYMBOL(bfin_gpio_set_value);
int bfin_gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
@ -1274,14 +1132,15 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
}
local_irq_save_hw(flags);
gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
if (value)
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
else
gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
gpio_set_value(gpio, value);
#ifdef BF548_FAMILY
gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
#else
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
#endif
gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
AWA_DUMMY_READ(dir);
local_irq_restore_hw(flags);
@ -1289,6 +1148,27 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
}
EXPORT_SYMBOL(bfin_gpio_direction_output);
int bfin_gpio_get_value(unsigned gpio)
{
#ifdef BF548_FAMILY
return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
#else
unsigned long flags;
if (unlikely(get_gpio_edge(gpio))) {
int ret;
local_irq_save_hw(flags);
set_gpio_edge(gpio, 0);
ret = get_gpio_data(gpio);
set_gpio_edge(gpio, 1);
local_irq_restore_hw(flags);
return ret;
} else
return get_gpio_data(gpio);
#endif
}
EXPORT_SYMBOL(bfin_gpio_get_value);
/* If we are booting from SPI and our board lacks a strong enough pull up,
* the core can reset and execute the bootrom faster than the resistor can
* pull the signal logically high. To work around this (common) error in
@ -1299,23 +1179,15 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
* lives here as we need to force all the GPIO states w/out going through
* BUG() checks and such.
*/
void bfin_gpio_reset_spi0_ssel1(void)
void bfin_reset_boot_spi_cs(unsigned short pin)
{
u16 gpio = P_IDENT(P_SPI0_SSEL1);
unsigned short gpio = P_IDENT(pin);
port_setup(gpio, GPIO_USAGE);
gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
AWA_DUMMY_READ(data_set);
udelay(1);
}
void bfin_gpio_irq_prepare(unsigned gpio)
{
port_setup(gpio, GPIO_USAGE);
}
#endif /*BF548_FAMILY */
#if defined(CONFIG_PROC_FS)
static int gpio_proc_read(char *buf, char **start, off_t offset,
int len, int *unused_i, void *unused_v)
@ -1369,11 +1241,7 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
{
#ifdef BF548_FAMILY
return bfin_gpio_set_value(gpio, value);
#else
return set_gpio_data(gpio, value);
#endif
}
int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)

Просмотреть файл

@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
dcplb_tbl[cpu][i_d].addr = 0;
dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
#if 0
icplb_tbl[cpu][i_i].addr = 0;
icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
#endif
icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
/* Cover kernel memory with 4M pages. */
addr = 0;

Просмотреть файл

@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu)
nr_icplb_supv_miss[cpu]++;
base = 0;
for (idx = 0; idx < icplb_nr_bounds; idx++) {
idx = 0;
do {
eaddr = icplb_bounds[idx].eaddr;
if (addr < eaddr)
break;
base = eaddr;
}
} while (++idx < icplb_nr_bounds);
if (unlikely(idx == icplb_nr_bounds))
return CPLB_NO_ADDR_MATCH;
@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu)
nr_dcplb_supv_miss[cpu]++;
base = 0;
for (idx = 0; idx < dcplb_nr_bounds; idx++) {
idx = 0;
do {
eaddr = dcplb_bounds[idx].eaddr;
if (addr < eaddr)
break;
base = eaddr;
}
} while (++idx < dcplb_nr_bounds);
if (unlikely(idx == dcplb_nr_bounds))
return CPLB_NO_ADDR_MATCH;

Просмотреть файл

@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/trace.h>
#include <asm/pda.h>
static atomic_t irq_err_count;
static spinlock_t irq_controller_lock;
@ -96,8 +97,13 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS)
} else if (i == NR_IRQS) {
seq_printf(p, "NMI: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
seq_printf(p, " CORE Non Maskable Interrupt\n");
seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
}
return 0;
}

Просмотреть файл

@ -20,8 +20,8 @@
* reset while the Core B bit (on dual core parts) is cleared by
* the core reset.
*/
__attribute__((l1_text))
static void _bfin_reset(void)
__attribute__ ((__l1_text__, __noreturn__))
static void bfin_reset(void)
{
/* Wait for completion of "system" events such as cache line
* line fills so that we avoid infinite stalls later on as
@ -30,7 +30,11 @@ static void _bfin_reset(void)
*/
__builtin_bfin_ssync();
while (1) {
/* The bootrom checks to see how it was reset and will
* automatically perform a software reset for us when
* it starts executing after the core reset.
*/
if (ANOMALY_05000353 || ANOMALY_05000386) {
/* Initiate System software reset. */
bfin_write_SWRST(0x7);
@ -50,6 +54,11 @@ static void _bfin_reset(void)
/* Clear System software reset */
bfin_write_SWRST(0);
/* The BF526 ROM will crash during reset */
#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
bfin_read_SWRST();
#endif
/* Wait for the SWRST write to complete. Cannot rely on SSYNC
* though as the System state is all reset now.
*/
@ -60,22 +69,11 @@ static void _bfin_reset(void)
: "a" (15 * 1)
: "LC1", "LB1", "LT1"
);
}
while (1)
/* Issue core reset */
asm("raise 1");
}
}
static void bfin_reset(void)
{
if (ANOMALY_05000353 || ANOMALY_05000386)
_bfin_reset();
else
/* the bootrom checks to see how it was reset and will
* automatically perform a software reset for us when
* it starts executing boot
*/
asm("raise 1;");
}
__attribute__((weak))

Просмотреть файл

@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
#define BFIN_MEMMAP_RAM 1
#define BFIN_MEMMAP_RESERVED 2
struct bfin_memmap {
static struct bfin_memmap {
int nr_map;
struct bfin_memmap_entry {
unsigned long long addr; /* start of memory segment */
@ -824,7 +824,15 @@ void __init setup_arch(char **cmdline_p)
flash_probe();
#endif
printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
/* Newer parts mirror SWRST bits in SYSCR */
#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
#else
_bfin_swrst = bfin_read_SYSCR();
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
@ -853,7 +861,7 @@ void __init setup_arch(char **cmdline_p)
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
else if (bfin_compiled_revid() == -1)

Просмотреть файл

@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address)
verbose_printk("RTI");
else if (opcode == 0x0012)
verbose_printk("RTX");
else if (opcode == 0x0013)
verbose_printk("RTN");
else if (opcode == 0x0014)
verbose_printk("RTE");
else if (opcode == 0x0025)
verbose_printk("EMUEXCPT");
else if (opcode == 0x0040 && opcode <= 0x0047)
verbose_printk("STI R%i", opcode & 7);
else if (opcode >= 0x0050 && opcode <= 0x0057)
verbose_printk("JUMP (P%i)", opcode & 7);
else if (opcode >= 0x0060 && opcode <= 0x0067)
@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address)
verbose_printk("CALL (PC+P%i)", opcode & 7);
else if (opcode >= 0x0080 && opcode <= 0x0087)
verbose_printk("JUMP (PC+P%i)", opcode & 7);
else if (opcode >= 0x0090 && opcode <= 0x009F)
verbose_printk("RAISE 0x%x", opcode & 0xF);
else if (opcode >= 0x00A0 && opcode <= 0x00AF)
verbose_printk("EXCPT 0x%x", opcode & 0xF);
else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
verbose_printk("IF !CC JUMP");
else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
@ -820,11 +832,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
decode_address(buf, (unsigned int)stack);
printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
addr = (unsigned int *)((unsigned int)stack & ~0x3F);
/* First thing is to look for a frame pointer */
for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
addr < endstack; addr++, i++) {
for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
if (*addr & 0x1)
continue;
ins_addr = (unsigned short *)*addr;
@ -834,7 +843,8 @@ void show_stack(struct task_struct *task, unsigned long *stack)
if (fp) {
/* Let's check to see if it is a frame pointer */
while (fp >= (addr - 1) && fp < endstack && fp)
while (fp >= (addr - 1) && fp < endstack
&& fp && ((unsigned int) fp & 0x3) == 0)
fp = (unsigned int *)*fp;
if (fp == 0 || fp == endstack) {
fp = addr - 1;
@ -1052,8 +1062,9 @@ void show_regs(struct pt_regs *fp)
char buf [150];
struct irqaction *action;
unsigned int i;
unsigned long flags;
unsigned long flags = 0;
unsigned int cpu = smp_processor_id();
unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
@ -1073,17 +1084,22 @@ void show_regs(struct pt_regs *fp)
}
verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n",
fp->seqstat & SEQSTAT_EXCAUSE);
for (i = 6; i <= 15 ; i++) {
for (i = 2; i <= 15 ; i++) {
if (fp->ipend & (1 << i)) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
if (i != 4) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
} else
verbose_printk(KERN_NOTICE " interrupts disabled\n");
}
}
/* if no interrupts are going off, don't print this out */
if (fp->ipend & ~0x3F) {
for (i = 0; i < (NR_IRQS - 1); i++) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
if (!in_atomic)
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
goto unlock;
@ -1096,7 +1112,8 @@ void show_regs(struct pt_regs *fp)
}
verbose_printk("\n");
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
if (!in_atomic)
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
}

Просмотреть файл

@ -46,6 +46,7 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
#include <net/dsa.h>
/*
* Name the Board for the /proc/cpuinfo
@ -104,8 +105,31 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
.mii_bus = &bfin_mii_bus.dev,
.netdev = &bfin_mac_device.dev,
.port_names[0] = NULL,
.port_names[1] = "eth%d",
.port_names[2] = "eth%d",
.port_names[3] = "cpu",
};
static struct platform_device ksz8893m_switch_device = {
.name = "dsa",
.id = 0,
.num_resources = 0,
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
};
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
static struct bfin5xx_spi_chip spi_switch_info = {
.enable_dma = 0,
.bits_per_word = 8,
};
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
.modalias = "ksz8893m",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 1,
.platform_data = NULL,
.controller_data = &spi_switch_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
@ -473,7 +519,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@ -487,7 +532,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@ -584,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
&bfin_spi1_device,
@ -632,12 +681,8 @@ static struct platform_device *stamp_devices[] __initdata = {
static int __init ezbrd_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
@ -649,7 +694,7 @@ void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)

Просмотреть файл

@ -103,6 +103,8 @@
#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
/* SPORT Port Mux */
#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))

Просмотреть файл

@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -793,7 +798,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@ -809,7 +813,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@ -920,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -968,27 +972,23 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init stamp_init(void)
static int __init cm_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
arch_initcall(stamp_init);
arch_initcall(cm_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)

Просмотреть файл

@ -208,8 +208,13 @@ static struct platform_device rtc_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -590,7 +595,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@ -604,7 +608,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@ -720,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -764,27 +768,23 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init stamp_init(void)
static int __init ezbrd_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
arch_initcall(stamp_init);
arch_initcall(ezbrd_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)

Просмотреть файл

@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -830,7 +835,6 @@ static struct platform_device i2c_bfin_twi_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@ -844,7 +848,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@ -988,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -1048,27 +1052,23 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init stamp_init(void)
static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
arch_initcall(stamp_init);
arch_initcall(ezkit_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)

Просмотреть файл

@ -73,6 +73,8 @@
#define P_HWAIT (P_DONTCARE)
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))

Просмотреть файл

@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
};
#endif
static const unsigned int cclk_vlev_datasheet[] =
{
@ -390,10 +388,8 @@ static int __init blackstamp_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
if (ret < 0)

Просмотреть файл

@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
static const unsigned int cclk_vlev_datasheet[] =
{
@ -550,10 +548,8 @@ static int __init stamp_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
if (ret < 0)

Просмотреть файл

@ -54,14 +54,11 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#define P_TMR2 (P_DONTCARE)
#define P_TMR1 (P_DONTCARE)
#define P_TMR0 (P_DONTCARE)
#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1))
#endif /* _MACH_PORTMUX_H_ */

Просмотреть файл

@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif

Просмотреть файл

@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -708,7 +714,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
};
static int __init stamp_init(void)
static int __init generic_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@ -720,13 +726,13 @@ static int __init stamp_init(void)
return 0;
}
arch_initcall(stamp_init);
arch_initcall(generic_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)

Просмотреть файл

@ -61,8 +61,13 @@ static struct platform_device rtc_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -377,5 +383,5 @@ void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}

Просмотреть файл

@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -558,7 +564,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
};
static int __init stamp_init(void)
static int __init pnav_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@ -569,7 +575,7 @@ static int __init stamp_init(void)
return 0;
}
arch_initcall(stamp_init);
arch_initcall(pnav_init);
void bfin_get_ether_addr(char *addr)
{

Просмотреть файл

@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -1068,7 +1073,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = {
};
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
@ -1102,7 +1106,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
},
#endif
};
#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@ -1217,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -1284,12 +1288,8 @@ static struct platform_device *stamp_devices[] __initdata = {
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
#endif
bfin_plat_nand_init();
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
bfin_gpio_reset_spi0_ssel1();
bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
/*

Просмотреть файл

@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
};
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
#endif
@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
#endif
@ -615,7 +621,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
&bfin_gpios_device,
};
static int __init cm_bf537_init(void)
static int __init tcm_bf537_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
@ -629,7 +635,7 @@ static int __init cm_bf537_init(void)
return 0;
}
arch_initcall(cm_bf537_init);
arch_initcall(tcm_bf537_init);
void bfin_get_ether_addr(char *addr)
{

Просмотреть файл

@ -31,6 +31,7 @@
#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))

Просмотреть файл

@ -102,5 +102,6 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#endif /* _MACH_PORTMUX_H_ */

Просмотреть файл

@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = {
#endif
#endif
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
};
@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
#endif
};
#endif
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>
@ -956,13 +954,11 @@ static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0));
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
i2c_register_board_info(1, bfin_i2c_board_info1,
ARRAY_SIZE(bfin_i2c_board_info1));
#endif
#endif
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));

Просмотреть файл

@ -175,6 +175,7 @@
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)

Просмотреть файл

@ -104,6 +104,18 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
#if defined(CONFIG_BF542M)
# define CONFIG_BF542
#elif defined(CONFIG_BF544M)
# define CONFIG_BF544
#elif defined(CONFIG_BF547M)
# define CONFIG_BF547
#elif defined(CONFIG_BF548M)
# define CONFIG_BF548
#elif defined(CONFIG_BF549M)
# define CONFIG_BF549
#endif
#if defined(CONFIG_BF542)
# define CPU "BF542"
# define CPUID 0x27de

Просмотреть файл

@ -195,17 +195,17 @@
struct gpio_port_t {
unsigned short port_fer;
unsigned short dummy1;
unsigned short port_data;
unsigned short data;
unsigned short dummy2;
unsigned short port_set;
unsigned short data_set;
unsigned short dummy3;
unsigned short port_clear;
unsigned short data_clear;
unsigned short dummy4;
unsigned short port_dir_set;
unsigned short dir_set;
unsigned short dummy5;
unsigned short port_dir_clear;
unsigned short dir_clear;
unsigned short dummy6;
unsigned short port_inen;
unsigned short inen;
unsigned short dummy7;
unsigned int port_mux;
};

Просмотреть файл

@ -125,6 +125,7 @@
#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))

Просмотреть файл

@ -1106,6 +1106,8 @@
#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */
#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
#define POL 0x0000C000 /* PPI Signal Polarities */
#define POLC 0x4000 /* PPI Clock Polarity */
#define POLS 0x8000 /* PPI Frame Sync Polarity */
/* PPI_STATUS Masks */
#define FLD 0x00000400 /* Field Indicator */

Просмотреть файл

@ -85,5 +85,6 @@
#define P_SPI0_MOSI (P_DONTCARE)
#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#endif /* _MACH_PORTMUX_H_ */

Просмотреть файл

@ -14,6 +14,7 @@
#include <asm/clocks.h>
#include <asm/mem_init.h>
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
(PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
@ -76,7 +77,7 @@ void init_clocks(void)
bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
#ifdef EBIU_SDGCTL
bfin_write_EBIU_SDRRC(mem_SDRRC);
bfin_write_EBIU_SDGCTL(mem_SDGCTL);
bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
#else
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
do_sync();

Просмотреть файл

@ -151,13 +151,6 @@ ENTRY(_ex_syscall)
jump.s _bfin_return_from_exception;
ENDPROC(_ex_syscall)
ENTRY(_ex_soft_bp)
r7 = retx;
r7 += -2;
retx = r7;
jump.s _ex_trap_c;
ENDPROC(_ex_soft_bp)
ENTRY(_ex_single_step)
/* If we just returned from an interrupt, the single step event is
for the RTI instruction. */
@ -1087,7 +1080,7 @@ ENTRY(_ex_table)
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
.long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
.long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */
#ifdef CONFIG_KGDB
.long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
and break signal trap */

Просмотреть файл

@ -17,6 +17,19 @@
__INIT
ENTRY(__init_clear_bss)
r2 = r2 - r1;
cc = r2 == 0;
if cc jump .L_bss_done;
r2 >>= 2;
p1 = r1;
p2 = r2;
lsetup (1f, 1f) lc0 = p2;
1: [p1++] = r0;
.L_bss_done:
rts;
ENDPROC(__init_clear_bss)
#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
ENTRY(__start)
@ -144,6 +157,35 @@ ENTRY(__start)
call _init_early_exception_vectors;
#endif
r0 = 0 (x);
/* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1;
r1.h = __sbss_l1;
r2.l = __ebss_l1;
r2.h = __ebss_l1;
call __init_clear_bss
#endif
#if L1_DATA_B_LENGTH > 0
r1.l = __sbss_b_l1;
r1.h = __sbss_b_l1;
r2.l = __ebss_b_l1;
r2.h = __ebss_b_l1;
call __init_clear_bss
#endif
#if L2_LENGTH > 0
r1.l = __sbss_l2;
r1.h = __sbss_l2;
r2.l = __ebss_l2;
r2.h = __ebss_l2;
call __init_clear_bss
#endif
r1.l = ___bss_start;
r1.h = ___bss_start;
r2.l = ___bss_stop;
r2.h = ___bss_stop;
call __init_clear_bss
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bfin_relocate_l1_mem;
#ifdef CONFIG_BFIN_KERNEL_CLOCK
@ -185,19 +227,6 @@ ENDPROC(__start)
# define WDOG_CTL WDOGA_CTL
#endif
ENTRY(__init_clear_bss)
r2 = r2 - r1;
cc = r2 == 0;
if cc jump .L_bss_done;
r2 >>= 2;
p1 = r1;
p2 = r2;
lsetup (1f, 1f) lc0 = p2;
1: [p1++] = r0;
.L_bss_done:
rts;
ENDPROC(__init_clear_bss)
ENTRY(_real_start)
/* Enable nested interrupts */
[--sp] = reti;
@ -209,35 +238,6 @@ ENTRY(_real_start)
w[p0] = r0;
ssync;
r0 = 0 (x);
/* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1;
r1.h = __sbss_l1;
r2.l = __ebss_l1;
r2.h = __ebss_l1;
call __init_clear_bss
#endif
#if L1_DATA_B_LENGTH > 0
r1.l = __sbss_b_l1;
r1.h = __sbss_b_l1;
r2.l = __ebss_b_l1;
r2.h = __ebss_b_l1;
call __init_clear_bss
#endif
#if L2_LENGTH > 0
r1.l = __sbss_l2;
r1.h = __sbss_l2;
r2.l = __ebss_l2;
r2.h = __ebss_l2;
call __init_clear_bss
#endif
r1.l = ___bss_start;
r1.h = ___bss_start;
r2.l = ___bss_stop;
r2.h = ___bss_stop;
call __init_clear_bss
/* Pass the u-boot arguments to the global value command line */
R0 = R7;
call _cmdline_init;

Просмотреть файл

@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw)
/* Interrupt routine for evt2 (NMI).
* We don't actually use this, so just return.
* For inner circle type details, please see:
* http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
* http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
*/
ENTRY(_evt_nmi)
.weak _evt_nmi

Просмотреть файл

@ -1101,10 +1101,9 @@ int __init init_arch_irq(void)
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
|| defined(BF538_FAMILY) || defined(CONFIG_BF51x)
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
# ifdef SIC_IWR1
/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
@ -1114,10 +1113,8 @@ int __init init_arch_irq(void)
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#endif
# ifdef CONFIG_BF54x
# endif
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else

Просмотреть файл

@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void)
bfin_pm_standby_restore();
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \
defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
# ifdef SIC_IWR1
/* BF52x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void)
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
#endif
# ifdef CONFIG_BF54x
# endif
# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else

Просмотреть файл

@ -36,10 +36,10 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/hardirq.h>
#include <asm/pgalloc.h>
#include <asm/io.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>

Просмотреть файл

@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
size = pci_resource_len(dev, PCI_ROM_RESOURCE);
addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
size);
image_size = pci_get_rom_size(addr, size);
image_size = pci_get_rom_size(dev, addr, size);
dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
dev->resource[PCI_ROM_RESOURCE].end =
(unsigned long) addr + image_size - 1;

Просмотреть файл

@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev)
rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
size + 1);
image_size = pci_get_rom_size(rom, size + 1);
image_size = pci_get_rom_size(dev, rom, size + 1);
dev->resource[PCI_ROM_RESOURCE].end =
dev->resource[PCI_ROM_RESOURCE].start +
image_size - 1;

Просмотреть файл

@ -51,6 +51,7 @@ static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
return (((counters >> 14) - counters) & 0x1fff) > 1;
}
#define __raw_spin_is_contended __raw_spin_is_contended
static inline void __raw_spin_lock(raw_spinlock_t *lock)
{

Просмотреть файл

@ -191,7 +191,8 @@
interrupts = <37 0x8 36 0x8 35 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
phy-handle = < &phy1 >;
/* Vitesse 7385 isn't on the MDIO bus */
fixed-link = <1 1 1000 0 0>;
fsl,magic-packet;
mdio@24520 {
@ -199,12 +200,6 @@
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
@ -219,6 +214,8 @@
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";

Просмотреть файл

@ -651,7 +651,7 @@ CONFIG_CICADA_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y

Просмотреть файл

@ -195,8 +195,9 @@ __ftrace_make_nop(struct module *mod,
return -EINVAL;
}
offset = (unsigned)((unsigned short)jmp[0]) << 16 |
(unsigned)((unsigned short)jmp[1]);
/* The bottom half is signed extended */
offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
(int)((short)jmp[1]);
DEBUGP(" %x ", offset);

Просмотреть файл

@ -561,8 +561,21 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus,
(unsigned long long)(offset + size - 1));
if (mmap_state == pci_mmap_mem) {
if ((offset + size) > hose->isa_mem_size)
return -ENXIO;
/* Hack alert !
*
* Because X is lame and can fail starting if it gets an error trying
* to mmap legacy_mem (instead of just moving on without legacy memory
* access) we fake it here by giving it anonymous memory, effectively
* behaving just like /dev/zero
*/
if ((offset + size) > hose->isa_mem_size) {
printk(KERN_DEBUG
"Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
current->comm, current->pid, pci_domain_nr(bus), bus->number);
if (vma->vm_flags & VM_SHARED)
return shmem_zero_setup(vma);
return 0;
}
offset += hose->isa_mem_phys;
} else {
unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше