extconn: Clean-up few drivers by using managed work init

Few drivers implement remove call-back only for ensuring a delayed
work gets cancelled prior driver removal. Clean-up these by switching
to use devm_delayed_work_autocancel() instead.

Additionally, this helps avoiding mixing devm and manual resource
management and cleans up a (theoretical?) bug from extconn-palmas.c
and extcon-qcom-spmi-misc.c where (devm managed)IRQ might schedule
new work item after wq was cleaned at remove().

This change is compile-tested only. All testing is appreciated.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/b1030eddbf0069f2d39e951be1d8e40d6413aeeb.1616506559.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/extcon/extcon-gpio.c

@@ -9,6 +9,7 @@
  * (originally switch class is supported)
  */
 
+#include <linux/devm-helpers.h>
 #include <linux/extcon-provider.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
@@ -112,7 +113,9 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	INIT_DELAYED_WORK(&data->work, gpio_extcon_work);
+	ret = devm_delayed_work_autocancel(dev, &data->work, gpio_extcon_work);
+	if (ret)
+		return ret;
 
 	/*
 	 * Request the interrupt of gpio to detect whether external connector
@@ -131,15 +134,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int gpio_extcon_remove(struct platform_device *pdev)
-{
-	struct gpio_extcon_data *data = platform_get_drvdata(pdev);
-
-	cancel_delayed_work_sync(&data->work);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int gpio_extcon_resume(struct device *dev)
 {
@@ -158,7 +152,6 @@ static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
 
 static struct platform_driver gpio_extcon_driver = {
 	.probe		= gpio_extcon_probe,
-	.remove		= gpio_extcon_remove,
 	.driver		= {
 		.name	= "extcon-gpio",
 		.pm	= &gpio_extcon_pm_ops,

drivers/extcon/extcon-intel-int3496.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/devm-helpers.h>
 #include <linux/extcon-provider.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
@@ -101,7 +102,9 @@ static int int3496_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	data->dev = dev;
-	INIT_DELAYED_WORK(&data->work, int3496_do_usb_id);
+	ret = devm_delayed_work_autocancel(dev, &data->work, int3496_do_usb_id);
+	if (ret)
+		return ret;
 
 	data->gpio_usb_id = devm_gpiod_get(dev, "id", GPIOD_IN);
 	if (IS_ERR(data->gpio_usb_id)) {
@@ -155,16 +158,6 @@ static int int3496_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int int3496_remove(struct platform_device *pdev)
-{
-	struct int3496_data *data = platform_get_drvdata(pdev);
-
-	devm_free_irq(&pdev->dev, data->usb_id_irq, data);
-	cancel_delayed_work_sync(&data->work);
-
-	return 0;
-}
-
 static const struct acpi_device_id int3496_acpi_match[] = {
 	{ "INT3496" },
 	{ }
@@ -177,7 +170,6 @@ static struct platform_driver int3496_driver = {
 		.acpi_match_table = int3496_acpi_match,
 	},
 	.probe = int3496_probe,
-	.remove = int3496_remove,
 };
 
 module_platform_driver(int3496_driver);

drivers/extcon/extcon-palmas.c

@@ -9,6 +9,7 @@
  * Author: Hema HK <hemahk@ti.com>
  */
 
+#include <linux/devm-helpers.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -237,7 +238,11 @@ static int palmas_usb_probe(struct platform_device *pdev)
 			palmas_usb->sw_debounce_jiffies = msecs_to_jiffies(debounce);
 	}
 
-	INIT_DELAYED_WORK(&palmas_usb->wq_detectid, palmas_gpio_id_detect);
+	status = devm_delayed_work_autocancel(&pdev->dev,
+					      &palmas_usb->wq_detectid,
+					      palmas_gpio_id_detect);
+	if (status)
+		return status;
 
 	palmas->usb = palmas_usb;
 	palmas_usb->palmas = palmas;
@@ -359,15 +364,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int palmas_usb_remove(struct platform_device *pdev)
-{
-	struct palmas_usb *palmas_usb = platform_get_drvdata(pdev);
-
-	cancel_delayed_work_sync(&palmas_usb->wq_detectid);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int palmas_usb_suspend(struct device *dev)
 {
@@ -422,7 +418,6 @@ static const struct of_device_id of_palmas_match_tbl[] = {
 
 static struct platform_driver palmas_usb_driver = {
 	.probe = palmas_usb_probe,
-	.remove = palmas_usb_remove,
 	.driver = {
 		.name = "palmas-usb",
 		.of_match_table = of_palmas_match_tbl,

drivers/extcon/extcon-qcom-spmi-misc.c

@@ -7,6 +7,7 @@
  * Stephen Boyd <stephen.boyd@linaro.org>
  */
 
+#include <linux/devm-helpers.h>
 #include <linux/extcon-provider.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -80,7 +81,11 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
 	}
 
 	info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
-	INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
+
+	ret = devm_delayed_work_autocancel(dev, &info->wq_detcable,
+					   qcom_usb_extcon_detect_cable);
+	if (ret)
+		return ret;
 
 	info->irq = platform_get_irq_byname(pdev, "usb_id");
 	if (info->irq < 0)
@@ -105,15 +110,6 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int qcom_usb_extcon_remove(struct platform_device *pdev)
-{
-	struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev);
-
-	cancel_delayed_work_sync(&info->wq_detcable);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int qcom_usb_extcon_suspend(struct device *dev)
 {
@@ -149,7 +145,6 @@ MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
 
 static struct platform_driver qcom_usb_extcon_driver = {
 	.probe		= qcom_usb_extcon_probe,
-	.remove		= qcom_usb_extcon_remove,
 	.driver		= {
 		.name	= "extcon-pm8941-misc",
 		.pm	= &qcom_usb_extcon_pm_ops,