From fa6134e5457d3177b82b35fa4004505f2571150a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 13 Jun 2017 22:45:39 +0900 Subject: [PATCH] mtd: nand: denali: switch over to cmd_ctrl instead of cmdfunc The NAND_CMD_SET_FEATURES support is missing from denali_cmdfunc(). We also see /* TODO: Read OOB data */ comment. It would be possible to add more commands along with the current implementation, but having ->cmd_ctrl() seems a better approach from the discussion with Boris [1]. Rely on the default ->cmdfunc() from the framework and implement the driver's own ->cmd_ctrl(). This transition also fixes NAND_CMD_STATUS and NAND_CMD_PARAM handling. NAND_CMD_STATUS was just faked by the register read, so the only valid bit was the WP bit. NAND_CMD_PARAM was completely broken; not only the command sent on the bus was NAND_CMD_STATUS instead of NAND_CMD_PARAM, but also the driver was only reading 8 bytes, while the parameter page contains several hundreds of bytes. Also add ->write_byte(), which is needed for write direction commands, ->read/write_buf(16), which will be used some commits later. ->read_word() is not used for now, but the core may call it in the future. Now, this driver can drop nand_onfi_get_set_features_notsupp(). [1] https://lkml.org/lkml/2017/3/15/97 Signed-off-by: Masahiro Yamada Signed-off-by: Boris Brezillon --- drivers/mtd/nand/denali.c | 232 ++++++++++++++++++++------------------ drivers/mtd/nand/denali.h | 2 - 2 files changed, 123 insertions(+), 111 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 2acdc5f42a00..8091ba0916cc 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -85,43 +85,6 @@ static void index_addr(struct denali_nand_info *denali, iowrite32(data, denali->flash_mem + 0x10); } -/* Perform an indexed read of the device */ -static void index_addr_read_data(struct denali_nand_info *denali, - uint32_t address, uint32_t *pdata) -{ - iowrite32(address, denali->flash_mem); - *pdata = ioread32(denali->flash_mem + 0x10); -} - -/* - * We need to buffer some data for some of the NAND core routines. - * The operations manage buffering that data. - */ -static void reset_buf(struct denali_nand_info *denali) -{ - denali->buf.head = denali->buf.tail = 0; -} - -static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) -{ - denali->buf.buf[denali->buf.tail++] = byte; -} - -/* reads the status of the device */ -static void read_status(struct denali_nand_info *denali) -{ - uint32_t cmd; - - /* initialize the data buffer to store status */ - reset_buf(denali); - - cmd = ioread32(denali->flash_reg + WRITE_PROTECT); - if (cmd) - write_byte_to_buf(denali, NAND_STATUS_WP); - else - write_byte_to_buf(denali, 0); -} - /* Reset the flash controller */ static uint16_t denali_nand_reset(struct denali_nand_info *denali) { @@ -268,20 +231,16 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali, return denali->irq_status; } -/* resets a specific device connected to the core */ -static void reset_bank(struct denali_nand_info *denali) +static uint32_t denali_check_irq(struct denali_nand_info *denali) { + unsigned long flags; uint32_t irq_status; - denali_reset_irq(denali); + spin_lock_irqsave(&denali->irq_lock, flags); + irq_status = denali->irq_status; + spin_unlock_irqrestore(&denali->irq_lock, flags); - iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); - - irq_status = denali_wait_for_irq(denali, - INTR__RST_COMP | INTR__TIME_OUT); - - if (!(irq_status & INTR__RST_COMP)) - dev_err(denali->dev, "reset bank failed.\n"); + return irq_status; } /* @@ -302,6 +261,105 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); } +static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + int i; + + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + + for (i = 0; i < len; i++) + buf[i] = ioread32(denali->flash_mem + 0x10); +} + +static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + int i; + + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + + for (i = 0; i < len; i++) + iowrite32(buf[i], denali->flash_mem + 0x10); +} + +static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint16_t *buf16 = (uint16_t *)buf; + int i; + + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + + for (i = 0; i < len / 2; i++) + buf16[i] = ioread32(denali->flash_mem + 0x10); +} + +static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + const uint16_t *buf16 = (const uint16_t *)buf; + int i; + + iowrite32(MODE_11 | BANK(denali->flash_bank) | 2, denali->flash_mem); + + for (i = 0; i < len / 2; i++) + iowrite32(buf16[i], denali->flash_mem + 0x10); +} + +static uint8_t denali_read_byte(struct mtd_info *mtd) +{ + uint8_t byte; + + denali_read_buf(mtd, &byte, 1); + + return byte; +} + +static void denali_write_byte(struct mtd_info *mtd, uint8_t byte) +{ + denali_write_buf(mtd, &byte, 1); +} + +static uint16_t denali_read_word(struct mtd_info *mtd) +{ + uint16_t word; + + denali_read_buf16(mtd, (uint8_t *)&word, 2); + + return word; +} + +static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t type; + + if (ctrl & NAND_CLE) + type = 0; + else if (ctrl & NAND_ALE) + type = 1; + else + return; + + /* + * Some commands are followed by chip->dev_ready or chip->waitfunc. + * irq_status must be cleared here to catch the R/B# interrupt later. + */ + if (ctrl & NAND_CTRL_CHANGE) + denali_reset_irq(denali); + + index_addr(denali, MODE_11 | BANK(denali->flash_bank) | type, dat); +} + +static int denali_dev_ready(struct mtd_info *mtd) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + return !!(denali_check_irq(denali) & INTR__INT_ACT); +} + /* * sends a pipeline command operation to the controller. See the Denali NAND * controller's user guide for more information (section 4.2.3.6). @@ -844,17 +902,6 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, return 0; } -static uint8_t denali_read_byte(struct mtd_info *mtd) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - uint8_t result = 0xff; - - if (denali->buf.head < denali->buf.tail) - result = denali->buf.buf[denali->buf.head++]; - - return result; -} - static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); @@ -864,7 +911,13 @@ static void denali_select_chip(struct mtd_info *mtd, int chip) static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) { - return 0; + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_status; + + /* R/B# pin transitioned from low to high? */ + irq_status = denali_wait_for_irq(denali, INTR__INT_ACT); + + return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL; } static int denali_erase(struct mtd_info *mtd, int page) @@ -885,45 +938,6 @@ static int denali_erase(struct mtd_info *mtd, int page) return irq_status & INTR__ERASE_COMP ? 0 : NAND_STATUS_FAIL; } -static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, - int page) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t addr, id; - int i; - - switch (cmd) { - case NAND_CMD_STATUS: - read_status(denali); - break; - case NAND_CMD_READID: - case NAND_CMD_PARAM: - reset_buf(denali); - /* - * sometimes ManufactureId read from register is not right - * e.g. some of Micron MT29F32G08QAA MLC NAND chips - * So here we send READID cmd to NAND insteand - */ - addr = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, addr | 0, 0x90); - index_addr(denali, addr | 1, col); - for (i = 0; i < 8; i++) { - index_addr_read_data(denali, addr | 2, &id); - write_byte_to_buf(denali, id); - } - break; - case NAND_CMD_RESET: - reset_bank(denali); - break; - case NAND_CMD_READOOB: - /* TODO: Read OOB data */ - break; - default: - pr_err(": unsupported command received 0x%x\n", cmd); - break; - } -} - #define DIV_ROUND_DOWN_ULL(ll, d) \ ({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; }) @@ -1239,12 +1253,6 @@ int denali_init(struct denali_nand_info *denali) struct mtd_info *mtd = nand_to_mtd(chip); int ret; - /* allocate a temporary buffer for nand_scan_ident() */ - denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE, - GFP_DMA | GFP_KERNEL); - if (!denali->buf.buf) - return -ENOMEM; - mtd->dev.parent = denali->dev; denali_hw_init(denali); denali_drv_init(denali); @@ -1268,11 +1276,12 @@ int denali_init(struct denali_nand_info *denali) /* register the driver with the NAND core subsystem */ chip->select_chip = denali_select_chip; - chip->cmdfunc = denali_cmdfunc; chip->read_byte = denali_read_byte; + chip->write_byte = denali_write_byte; + chip->read_word = denali_read_word; + chip->cmd_ctrl = denali_cmd_ctrl; + chip->dev_ready = denali_dev_ready; chip->waitfunc = denali_waitfunc; - chip->onfi_set_features = nand_onfi_get_set_features_notsupp; - chip->onfi_get_features = nand_onfi_get_set_features_notsupp; /* clk rate info is needed for setup_data_interface */ if (denali->clk_x_rate) @@ -1287,8 +1296,6 @@ int denali_init(struct denali_nand_info *denali) if (ret) goto disable_irq; - /* allocate the right size buffer now */ - devm_kfree(denali->dev, denali->buf.buf); denali->buf.buf = devm_kzalloc(denali->dev, mtd->writesize + mtd->oobsize, GFP_KERNEL); @@ -1358,6 +1365,13 @@ int denali_init(struct denali_nand_info *denali) mtd_set_ooblayout(mtd, &denali_ooblayout_ops); + if (chip->options & NAND_BUSWIDTH_16) { + chip->read_buf = denali_read_buf16; + chip->write_buf = denali_write_buf16; + } else { + chip->read_buf = denali_read_buf; + chip->write_buf = denali_write_buf; + } chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS; chip->ecc.read_page = denali_read_page; chip->ecc.read_page_raw = denali_read_page_raw; diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index a0ac0f84f8b5..a84d8784ee98 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -306,8 +306,6 @@ #define MODE_11 0x0C000000 struct nand_buf { - int head; - int tail; uint8_t *buf; dma_addr_t dma_buf; };