microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

[S2IO]: Support for add/delete/store/restore ethernet addresses 

- Support to add/delete/store/restore 64 and 128 Ethernet addresses for Xframe I and Xframe II respectively.

Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sreenivasa Honnur 2008-01-24 01:45:43 -08:00 коммит произвёл David S. Miller
Родитель db0ce50d37
Коммит faa4f7969f
3 изменённых файлов: 201 добавлений и 23 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

16
drivers/net/s2io-regs.h
Просмотреть файл

@ -723,11 +723,17 @@ struct XENA_dev_config {
u64 rmac_cfg_key;
#define RMAC_CFG_KEY(val) vBIT(val,0,16)
#define MAX_MAC_ADDRESSES 16
#define MAX_MC_ADDRESSES 32 /* Multicast addresses */
#define MAC_MAC_ADDR_START_OFFSET 0
#define MAC_MC_ADDR_START_OFFSET 16
#define MAC_MC_ALL_MC_ADDR_OFFSET 63 /* enables all multicast pkts */
#define S2IO_MAC_ADDR_START_OFFSET 0
#define S2IO_XENA_MAX_MC_ADDRESSES 64 /* multicast addresses */
#define S2IO_HERC_MAX_MC_ADDRESSES 256
#define S2IO_XENA_MAX_MAC_ADDRESSES 16
#define S2IO_HERC_MAX_MAC_ADDRESSES 64
#define S2IO_XENA_MC_ADDR_START_OFFSET 16
#define S2IO_HERC_MC_ADDR_START_OFFSET 64
u64 rmac_addr_cmd_mem;
#define RMAC_ADDR_CMD_MEM_WE s2BIT(7)
#define RMAC_ADDR_CMD_MEM_RD 0

194
drivers/net/s2io.c
Просмотреть файл

@ -3375,6 +3375,9 @@ static void s2io_reset(struct s2io_nic * sp)
/* Set swapper to enable I/O register access */
s2io_set_swapper(sp);
/* restore mac_addr entries */
do_s2io_restore_unicast_mc(sp);
/* Restore the MSIX table entries from local variables */
restore_xmsi_data(sp);
@ -3433,9 +3436,6 @@ static void s2io_reset(struct s2io_nic * sp)
writeq(val64, &bar0->pcc_err_reg);
}
/* restore the previously assigned mac address */
do_s2io_prog_unicast(sp->dev, (u8 *)&sp->def_mac_addr[0].mac_addr);
sp->device_enabled_once = FALSE;
}
@ -3920,6 +3920,9 @@ hw_init_failed:
static int s2io_close(struct net_device *dev)
{
struct s2io_nic *sp = dev->priv;
struct config_param *config = &sp->config;
u64 tmp64;
int offset;
/* Return if the device is already closed *
* Can happen when s2io_card_up failed in change_mtu *
@ -3928,6 +3931,14 @@ static int s2io_close(struct net_device *dev)
return 0;
netif_stop_queue(dev);
/* delete all populated mac entries */
for (offset = 1; offset < config->max_mc_addr; offset++) {
tmp64 = do_s2io_read_unicast_mc(sp, offset);
if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
do_s2io_delete_unicast_mc(sp, tmp64);
}
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
@ -4728,8 +4739,9 @@ static void s2io_set_multicast(struct net_device *dev)
struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
0xfeffffffffffULL;
u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
void __iomem *add;
struct config_param *config = &sp->config;
if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
/* Enable all Multicast addresses */
@ -4739,7 +4751,7 @@ static void s2io_set_multicast(struct net_device *dev)
&bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
@ -4747,7 +4759,7 @@ static void s2io_set_multicast(struct net_device *dev)
S2IO_BIT_RESET);
sp->m_cast_flg = 1;
sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
sp->all_multi_pos = config->max_mc_addr - 1;
} else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
/* Disable all Multicast addresses */
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
@ -4816,7 +4828,7 @@ static void s2io_set_multicast(struct net_device *dev)
/* Update individual M_CAST address list */
if ((!sp->m_cast_flg) && dev->mc_count) {
if (dev->mc_count >
(MAX_ADDRS_SUPPORTED - MAC_MC_ADDR_START_OFFSET - 1)) {
(config->max_mc_addr - config->max_mac_addr)) {
DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
dev->name);
DBG_PRINT(ERR_DBG, "can be added, please enable ");
@ -4836,7 +4848,7 @@ static void s2io_set_multicast(struct net_device *dev)
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
(MAC_MC_ADDR_START_OFFSET + i);
(config->mc_start_offset + i);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait for command completes */
@ -4868,7 +4880,7 @@ static void s2io_set_multicast(struct net_device *dev)
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
(i + MAC_MC_ADDR_START_OFFSET);
(i + config->mc_start_offset);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait for command completes */
@ -4884,8 +4896,78 @@ static void s2io_set_multicast(struct net_device *dev)
}
}
/* add unicast MAC address to CAM */
static int do_s2io_add_unicast(struct s2io_nic *sp, u64 addr, int off)
/* read from CAM unicast & multicast addresses and store it in
* def_mac_addr structure
*/
void do_s2io_store_unicast_mc(struct s2io_nic *sp)
{
int offset;
u64 mac_addr = 0x0;
struct config_param *config = &sp->config;
/* store unicast & multicast mac addresses */
for (offset = 0; offset < config->max_mc_addr; offset++) {
mac_addr = do_s2io_read_unicast_mc(sp, offset);
/* if read fails disable the entry */
if (mac_addr == FAILURE)
mac_addr = S2IO_DISABLE_MAC_ENTRY;
do_s2io_copy_mac_addr(sp, offset, mac_addr);
}
}
/* restore unicast & multicast MAC to CAM from def_mac_addr structure */
static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
{
int offset;
struct config_param *config = &sp->config;
/* restore unicast mac address */
for (offset = 0; offset < config->max_mac_addr; offset++)
do_s2io_prog_unicast(sp->dev,
sp->def_mac_addr[offset].mac_addr);
/* restore multicast mac address */
for (offset = config->mc_start_offset;
offset < config->max_mc_addr; offset++)
do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
}
/* add a multicast MAC address to CAM */
static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
{
int i;
u64 mac_addr = 0;
struct config_param *config = &sp->config;
for (i = 0; i < ETH_ALEN; i++) {
mac_addr <<= 8;
mac_addr |= addr[i];
}
if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
return SUCCESS;
/* check if the multicast mac already preset in CAM */
for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
u64 tmp64;
tmp64 = do_s2io_read_unicast_mc(sp, i);
if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
break;
if (tmp64 == mac_addr)
return SUCCESS;
}
if (i == config->max_mc_addr) {
DBG_PRINT(ERR_DBG,
"CAM full no space left for multicast MAC\n");
return FAILURE;
}
/* Update the internal structure with this new mac address */
do_s2io_copy_mac_addr(sp, i, mac_addr);
return (do_s2io_add_mac(sp, mac_addr, i));
}
/* add MAC address to CAM */
static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
{
u64 val64;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
@ -4902,15 +4984,62 @@ static int do_s2io_add_unicast(struct s2io_nic *sp, u64 addr, int off)
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
S2IO_BIT_RESET)) {
DBG_PRINT(INFO_DBG, "add_mac_addr failed\n");
DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
return FAILURE;
}
return SUCCESS;
}
/* deletes a specified unicast/multicast mac entry from CAM */
static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
{
int offset;
u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
struct config_param *config = &sp->config;
for (offset = 1;
offset < config->max_mc_addr; offset++) {
tmp64 = do_s2io_read_unicast_mc(sp, offset);
if (tmp64 == addr) {
/* disable the entry by writing 0xffffffffffffULL */
if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE)
return FAILURE;
/* store the new mac list from CAM */
do_s2io_store_unicast_mc(sp);
return SUCCESS;
}
}
DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
(unsigned long long)addr);
return FAILURE;
}
/* read mac entries from CAM */
static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
{
u64 tmp64 = 0xffffffffffff0000ULL, val64;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
/* read mac addr */
val64 =
RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET(offset);
writeq(val64, &bar0->rmac_addr_cmd_mem);
/* Wait till command completes */
if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
S2IO_BIT_RESET)) {
DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
return FAILURE;
}
tmp64 = readq(&bar0->rmac_addr_data0_mem);
return (tmp64 >> 16);
}
/**
* s2io_set_mac_addr driver entry point
*/
static int s2io_set_mac_addr(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
@ -4923,7 +5052,6 @@ static int s2io_set_mac_addr(struct net_device *dev, void *p)
/* store the MAC address in CAM */
return (do_s2io_prog_unicast(dev, dev->dev_addr));
}
/**
* do_s2io_prog_unicast - Programs the Xframe mac address
* @dev : pointer to the device structure.
@ -4933,11 +5061,14 @@ static int s2io_set_mac_addr(struct net_device *dev, void *p)
* Return value: SUCCESS on success and an appropriate (-)ve integer
* as defined in errno.h file on failure.
*/
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
{
struct s2io_nic *sp = dev->priv;
register u64 mac_addr = 0, perm_addr = 0;
int i;
u64 tmp64;
struct config_param *config = &sp->config;
/*
* Set the new MAC address as the new unicast filter and reflect this
@ -4955,9 +5086,26 @@ static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
if (mac_addr == perm_addr)
return SUCCESS;
/* check if the mac already preset in CAM */
for (i = 1; i < config->max_mac_addr; i++) {
tmp64 = do_s2io_read_unicast_mc(sp, i);
if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
break;
if (tmp64 == mac_addr) {
DBG_PRINT(INFO_DBG,
"MAC addr:0x%llx already present in CAM\n",
(unsigned long long)mac_addr);
return SUCCESS;
}
}
if (i == config->max_mac_addr) {
DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
return FAILURE;
}
/* Update the internal structure with this new mac address */
do_s2io_copy_mac_addr(sp, 0, mac_addr);
return (do_s2io_add_unicast(sp, mac_addr, 0));
do_s2io_copy_mac_addr(sp, i, mac_addr);
return (do_s2io_add_mac(sp, mac_addr, i));
}
/**
@ -7651,7 +7799,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
*/
bar0 = sp->bar0;
val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
writeq(val64, &bar0->rmac_addr_cmd_mem);
wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET);
@ -7671,6 +7819,20 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
/* initialize number of multicast & unicast MAC entries variables */
if (sp->device_type == XFRAME_I_DEVICE) {
config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
} else if (sp->device_type == XFRAME_II_DEVICE) {
config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
}
/* store mac addresses from CAM to s2io_nic structure */
do_s2io_store_unicast_mc(sp);
/* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */

14
drivers/net/s2io.h
Просмотреть файл

@ -31,6 +31,7 @@
#define SUCCESS 0
#define FAILURE -1
#define S2IO_MINUS_ONE 0xFFFFFFFFFFFFFFFFULL
#define S2IO_DISABLE_MAC_ENTRY 0xFFFFFFFFFFFFULL
#define S2IO_MAX_PCI_CONFIG_SPACE_REINIT 100
#define S2IO_BIT_RESET 1
#define S2IO_BIT_SET 2
@ -458,6 +459,9 @@ struct config_param {
#define MAX_MTU_JUMBO (MAX_PYLD_JUMBO+18)
#define MAX_MTU_JUMBO_VLAN (MAX_PYLD_JUMBO+22)
u16 bus_speed;
int max_mc_addr; /* xena=64 herc=256 */
int max_mac_addr; /* xena=16 herc=64 */
int mc_start_offset; /* xena=16 herc=64 */
};
/* Structure representing MAC Addrs */
@ -826,7 +830,7 @@ struct s2io_nic {
#define MAX_MAC_SUPPORTED 16
#define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
struct mac_addr def_mac_addr[MAX_MAC_SUPPORTED];
struct mac_addr def_mac_addr[256];
struct net_device_stats stats;
int high_dma_flag;
@ -853,7 +857,7 @@ struct s2io_nic {
#define MAX_ADDRS_SUPPORTED 64
u16 usr_addr_count;
u16 mc_addr_count;
struct usr_addr usr_addrs[MAX_ADDRS_SUPPORTED];
struct usr_addr usr_addrs[256];
u16 m_cast_flg;
u16 all_multi_pos;
@ -1066,6 +1070,12 @@ static int s2io_add_isr(struct s2io_nic * sp);
static void s2io_rem_isr(struct s2io_nic * sp);
static void restore_xmsi_data(struct s2io_nic *nic);
static void do_s2io_store_unicast_mc(struct s2io_nic *sp);
static void do_s2io_restore_unicast_mc(struct s2io_nic *sp);
static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset);
static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr);
static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int offset);
static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr);
static int
s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,