ARM: dts: rockchip: add core rk3036 dtsi
Initial release for rk3036 shared dtsi. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Xing Zheng
Heiko Stuebner
Родитель
20aef5a220
Коммит
faea098e18
|
|
@ -0,0 +1,554 @@
|
|||
/*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/clock/rk3036-cru.h>
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3036";
|
||||
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
mshc0 = &emmc;
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x60000000 0x40000000>;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
enable-method = "rockchip,rk3036-smp";
|
||||
|
||||
cpu0: cpu@f00 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0xf00>;
|
||||
resets = <&cru SRST_CORE0>;
|
||||
operating-points = <
|
||||
/* KHz uV */
|
||||
816000 1000000
|
||||
>;
|
||||
clock-latency = <40000>;
|
||||
clocks = <&cru ARMCLK>;
|
||||
};
|
||||
|
||||
cpu1: cpu@f01 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0xf01>;
|
||||
resets = <&cru SRST_CORE1>;
|
||||
};
|
||||
};
|
||||
|
||||
amba {
|
||||
compatible = "arm,amba-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
pdma: pdma@20078000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x20078000 0x4000>;
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
clocks = <&cru ACLK_DMAC2>;
|
||||
clock-names = "apb_pclk";
|
||||
};
|
||||
};
|
||||
|
||||
arm-pmu {
|
||||
compatible = "arm,cortex-a7-pmu";
|
||||
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-affinity = <&cpu0>, <&cpu1>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
arm,cpu-registers-not-fw-configured;
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
|
||||
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
|
||||
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
|
||||
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
xin24m: oscillator {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "xin24m";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
bus_intmem@10080000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x10080000 0x2000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x10080000 0x2000>;
|
||||
|
||||
smp-sram@0 {
|
||||
compatible = "rockchip,rk3066-smp-sram";
|
||||
reg = <0x00 0x10>;
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@10139000 {
|
||||
compatible = "arm,gic-400";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
|
||||
reg = <0x10139000 0x1000>,
|
||||
<0x1013a000 0x1000>,
|
||||
<0x1013c000 0x2000>,
|
||||
<0x1013e000 0x2000>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
usb_otg: usb@10180000 {
|
||||
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
||||
"snps,dwc2";
|
||||
reg = <0x10180000 0x40000>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_OTG0>;
|
||||
clock-names = "otg";
|
||||
dr_mode = "otg";
|
||||
g-np-tx-fifo-size = <16>;
|
||||
g-rx-fifo-size = <275>;
|
||||
g-tx-fifo-size = <256 128 128 64 64 32>;
|
||||
g-use-dma;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host: usb@101c0000 {
|
||||
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
|
||||
"snps,dwc2";
|
||||
reg = <0x101c0000 0x40000>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_OTG1>;
|
||||
clock-names = "otg";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
emmc: dwmmc@1021c000 {
|
||||
compatible = "rockchip,rk3288-dw-mshc";
|
||||
reg = <0x1021c000 0x4000>;
|
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
broken-cd;
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
clock-frequency = <37500000>;
|
||||
clock-freq-min-max = <400000 37500000>;
|
||||
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
|
||||
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
|
||||
default-sample-phase = <158>;
|
||||
disable-wp;
|
||||
dmas = <&pdma 12>;
|
||||
dma-names = "rx-tx";
|
||||
fifo-depth = <0x100>;
|
||||
mmc-ddr-1_8v;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s: i2s@10220000 {
|
||||
compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
|
||||
reg = <0x10220000 0x4000>;
|
||||
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "i2s_hclk", "i2s_clk";
|
||||
clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
|
||||
dmas = <&pdma 0>, <&pdma 1>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cru: clock-controller@20000000 {
|
||||
compatible = "rockchip,rk3036-cru";
|
||||
reg = <0x20000000 0x1000>;
|
||||
rockchip,grf = <&grf>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
assigned-clocks = <&cru PLL_GPLL>;
|
||||
assigned-clock-rates = <594000000>;
|
||||
};
|
||||
|
||||
grf: syscon@20008000 {
|
||||
compatible = "rockchip,rk3036-grf", "syscon";
|
||||
reg = <0x20008000 0x1000>;
|
||||
};
|
||||
|
||||
acodec: acodec-ana@20030000 {
|
||||
compatible = "rk3036-codec";
|
||||
reg = <0x20030000 0x4000>;
|
||||
rockchip,grf = <&grf>;
|
||||
clock-names = "acodec_pclk";
|
||||
clocks = <&cru PCLK_ACODEC>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer: timer@20044000 {
|
||||
compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
|
||||
reg = <0x20044000 0x20>;
|
||||
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&xin24m>, <&cru PCLK_TIMER>;
|
||||
clock-names = "timer", "pclk";
|
||||
};
|
||||
|
||||
pwm0: pwm@20050000 {
|
||||
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
|
||||
reg = <0x20050000 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pin>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm1: pwm@20050010 {
|
||||
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
|
||||
reg = <0x20050010 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm1_pin>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm2: pwm@20050020 {
|
||||
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
|
||||
reg = <0x20050020 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2_pin>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm3: pwm@20050030 {
|
||||
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
|
||||
reg = <0x20050030 0x10>;
|
||||
#pwm-cells = <2>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3_pin>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@20056000 {
|
||||
compatible = "rockchip,rk3288-i2c";
|
||||
reg = <0x20056000 0x1000>;
|
||||
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "i2c";
|
||||
clocks = <&cru PCLK_I2C1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@2005a000 {
|
||||
compatible = "rockchip,rk3288-i2c";
|
||||
reg = <0x2005a000 0x1000>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "i2c";
|
||||
clocks = <&cru PCLK_I2C2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@20060000 {
|
||||
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
||||
reg = <0x20060000 0x100>;
|
||||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clock-frequency = <24000000>;
|
||||
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@20064000 {
|
||||
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
||||
reg = <0x20064000 0x100>;
|
||||
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clock-frequency = <24000000>;
|
||||
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@20068000 {
|
||||
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
|
||||
reg = <0x20068000 0x100>;
|
||||
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
clock-frequency = <24000000>;
|
||||
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@20072000 {
|
||||
compatible = "rockchip,rk3288-i2c";
|
||||
reg = <0x20072000 0x1000>;
|
||||
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "i2c";
|
||||
clocks = <&cru PCLK_I2C0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "rockchip,rk3036-pinctrl";
|
||||
rockchip,grf = <&grf>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpio0: gpio0@2007c000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x2007c000 0x100>;
|
||||
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru PCLK_GPIO0>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio1@20080000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x20080000 0x100>;
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru PCLK_GPIO1>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: gpio2@20084000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x20084000 0x100>;
|
||||
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru PCLK_GPIO2>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pcfg_pull_up: pcfg-pull-up {
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pcfg_pull_down: pcfg-pull-down {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pcfg_pull_none: pcfg-pull-none {
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pwm0 {
|
||||
pwm0_pin: pwm0-pin {
|
||||
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm1 {
|
||||
pwm1_pin: pwm1-pin {
|
||||
rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm2 {
|
||||
pwm2_pin: pwm2-pin {
|
||||
rockchip,pins = <0 1 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm3 {
|
||||
pwm3_pin: pwm3-pin {
|
||||
rockchip,pins = <0 27 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc {
|
||||
/*
|
||||
* We run eMMC at max speed; bump up drive strength.
|
||||
* We also have external pulls, so disable the internal ones.
|
||||
*/
|
||||
emmc_clk: emmc-clk {
|
||||
rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
emmc_cmd: emmc-cmd {
|
||||
rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
emmc_bus8: emmc-bus8 {
|
||||
rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 25 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 26 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 27 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 28 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 29 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 30 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 31 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0 {
|
||||
i2c0_xfer: i2c0-xfer {
|
||||
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<0 1 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1 {
|
||||
i2c1_xfer: i2c1-xfer {
|
||||
rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<0 3 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2 {
|
||||
i2c2_xfer: i2c2-xfer {
|
||||
rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<2 21 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
i2s {
|
||||
i2s_bus: i2s-bus {
|
||||
rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<1 1 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<1 2 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<1 3 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<1 4 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<1 5 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
uart0 {
|
||||
uart0_xfer: uart0-xfer {
|
||||
rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_up>,
|
||||
<0 17 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
uart0_cts: uart0-cts {
|
||||
rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
uart0_rts: uart0-rts {
|
||||
rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1 {
|
||||
uart1_xfer: uart1-xfer {
|
||||
rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
|
||||
<2 23 RK_FUNC_1 &pcfg_pull_none>;
|
||||
};
|
||||
/* no rts / cts for uart1 */
|
||||
};
|
||||
|
||||
uart2 {
|
||||
uart2_xfer: uart2-xfer {
|
||||
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
|
||||
<1 19 RK_FUNC_2 &pcfg_pull_none>;
|
||||
};
|
||||
/* no rts / cts for uart2 */
|
||||
};
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче