ARM: davinci: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
[nsekhar@ti.com: drop obsolete hawkboard.org URL completeley
		 fixup subject line prefix]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/boot/dts/da850-evm.dts

@@ -2,7 +2,7 @@
 /*
  * Device Tree for DA850 EVM board
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 #include "da850.dtsi"

arch/arm/mach-davinci/Kconfig

@@ -201,15 +201,13 @@ config MACH_MITYOMAPL138
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
-	  http://www.mitydsp.com
+	  https://www.mitydsp.com
 
 config MACH_OMAPL138_HAWKBOARD
 	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 	depends on ARCH_DAVINCI_DA850
 	help
 	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-	  Information of this board may be found at
-	  http://www.hawkboard.org/
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"

arch/arm/mach-davinci/board-da850-evm.c

@@ -1,7 +1,7 @@
 /*
  * TI DA850/OMAP-L138 EVM board
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/board-da830-evm.c
  * Original Copyrights follow:

arch/arm/mach-davinci/board-mityomapl138.c

@@ -1,7 +1,7 @@
 /*
  * Critical Link MityOMAP-L138 SoM
  *
- * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
+ * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -214,7 +214,7 @@ static __init void davinci_ntosd2_init(void)
 	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
 	 * The AEAWx are five new AEAW pins that can be muxed by separately.
 	 * They are a bitmask for GPIO management. According TI
-	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+	 * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ
 	 * gpio(10,11,12,13) for leds any combination of bits works except
 	 * four last. So we are to reset all five.
 	 */

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -3,7 +3,7 @@
  *
  * Initial code: Syed Mohammed Khasim
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of

arch/arm/mach-davinci/cpuidle.c

@@ -2,7 +2,7 @@
 /*
  * CPU idle for DaVinci SoCs
  *
- * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated. https://www.ti.com/
  *
  * Derived from Marvell Kirkwood CPU idle code
  * (arch/arm/mach-kirkwood/cpuidle.c)

arch/arm/mach-davinci/cpuidle.h

@@ -1,7 +1,7 @@
 /*
  * TI DaVinci cpuidle platform support
  *
- * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any

arch/arm/mach-davinci/da850.c

@@ -1,7 +1,7 @@
 /*
  * TI DA850/OMAP-L138 chip specific setup
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:

arch/arm/mach-davinci/da8xx-dt.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Modified from mach-omap/omap2/board-generic.c
  */

arch/arm/mach-davinci/include/mach/pm.h

@@ -1,7 +1,7 @@
 /*
  * TI DaVinci platform support for power management.
  *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

arch/arm/mach-davinci/pm.c

@@ -2,7 +2,7 @@
 /*
  * DaVinci Power Management Routines
  *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
  */
 
 #include <linux/pm.h>

arch/arm/mach-davinci/sleep.S

@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
+ * (C) Copyright 2009, Texas Instruments, Inc. https://www.ti.com/
  */
 
 /* replicated define because linux/bitops.h cannot be included in assembly */