hwmon: Add WM835x PMIC hardware monitoring driver
This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Родитель
39b1772a24
Коммит
fb6c023a2b
|
@ -0,0 +1,26 @@
|
|||
Kernel driver wm8350-hwmon
|
||||
==========================
|
||||
|
||||
Supported chips:
|
||||
* Wolfson Microelectronics WM835x PMICs
|
||||
Prefix: 'wm8350'
|
||||
Datasheet:
|
||||
http://www.wolfsonmicro.com/products/WM8350
|
||||
http://www.wolfsonmicro.com/products/WM8351
|
||||
http://www.wolfsonmicro.com/products/WM8352
|
||||
|
||||
Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
The WM835x series of PMICs include an AUXADC which can be used to
|
||||
monitor a range of system operating parameters, including the voltages
|
||||
of the major supplies within the system. Currently the driver provides
|
||||
simple access to these major supplies.
|
||||
|
||||
Voltage Monitoring
|
||||
------------------
|
||||
|
||||
Voltages are sampled by a 12 bit ADC. For the internal supplies the ADC
|
||||
is referenced to the system VRTC.
|
|
@ -937,6 +937,16 @@ config SENSORS_W83627EHF
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called w83627ehf.
|
||||
|
||||
config SENSORS_WM8350
|
||||
tristate "Wolfson Microelectronics WM835x"
|
||||
depends on MFD_WM8350
|
||||
help
|
||||
If you say yes here you get support for the hardware
|
||||
monitoring features of the WM835x series of PMICs.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called wm8350-hwmon.
|
||||
|
||||
config SENSORS_ULTRA45
|
||||
tristate "Sun Ultra45 PIC16F747"
|
||||
depends on SPARC64
|
||||
|
|
|
@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
|
|||
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
|
||||
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
|
||||
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
|
||||
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
|
||||
|
||||
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
|
||||
EXTRA_CFLAGS += -DDEBUG
|
||||
|
|
|
@ -0,0 +1,151 @@
|
|||
/*
|
||||
* drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC
|
||||
* hardware monitoring features.
|
||||
*
|
||||
* Copyright (C) 2009 Wolfson Microelectronics plc
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License v2 as published by the
|
||||
* Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
|
||||
#include <linux/mfd/wm8350/core.h>
|
||||
#include <linux/mfd/wm8350/comparator.h>
|
||||
|
||||
static ssize_t show_name(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
return sprintf(buf, "wm8350\n");
|
||||
}
|
||||
|
||||
static const char *input_names[] = {
|
||||
[WM8350_AUXADC_USB] = "USB",
|
||||
[WM8350_AUXADC_LINE] = "Line",
|
||||
[WM8350_AUXADC_BATT] = "Battery",
|
||||
};
|
||||
|
||||
|
||||
static ssize_t show_voltage(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct wm8350 *wm8350 = dev_get_drvdata(dev);
|
||||
int channel = to_sensor_dev_attr(attr)->index;
|
||||
int val;
|
||||
|
||||
val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF;
|
||||
val = DIV_ROUND_CLOSEST(val, 1000);
|
||||
|
||||
return sprintf(buf, "%d\n", val);
|
||||
}
|
||||
|
||||
static ssize_t show_label(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
int channel = to_sensor_dev_attr(attr)->index;
|
||||
|
||||
return sprintf(buf, "%s\n", input_names[channel]);
|
||||
}
|
||||
|
||||
#define WM8350_NAMED_VOLTAGE(id, name) \
|
||||
static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
|
||||
NULL, name); \
|
||||
static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
|
||||
NULL, name)
|
||||
|
||||
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
|
||||
|
||||
WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB);
|
||||
WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT);
|
||||
WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE);
|
||||
|
||||
static struct attribute *wm8350_attributes[] = {
|
||||
&dev_attr_name.attr,
|
||||
|
||||
&sensor_dev_attr_in0_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in0_label.dev_attr.attr,
|
||||
&sensor_dev_attr_in1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in1_label.dev_attr.attr,
|
||||
&sensor_dev_attr_in2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_in2_label.dev_attr.attr,
|
||||
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group wm8350_attr_group = {
|
||||
.attrs = wm8350_attributes,
|
||||
};
|
||||
|
||||
static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
|
||||
int ret;
|
||||
|
||||
ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev);
|
||||
if (IS_ERR(wm8350->hwmon.classdev)) {
|
||||
ret = PTR_ERR(wm8350->hwmon.classdev);
|
||||
goto err_group;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_group:
|
||||
sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
|
||||
err:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct wm8350 *wm8350 = platform_get_drvdata(pdev);
|
||||
|
||||
hwmon_device_unregister(wm8350->hwmon.classdev);
|
||||
sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver wm8350_hwmon_driver = {
|
||||
.probe = wm8350_hwmon_probe,
|
||||
.remove = __devexit_p(wm8350_hwmon_remove),
|
||||
.driver = {
|
||||
.name = "wm8350-hwmon",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init wm8350_hwmon_init(void)
|
||||
{
|
||||
return platform_driver_register(&wm8350_hwmon_driver);
|
||||
}
|
||||
module_init(wm8350_hwmon_init);
|
||||
|
||||
static void __exit wm8350_hwmon_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&wm8350_hwmon_driver);
|
||||
}
|
||||
module_exit(wm8350_hwmon_exit);
|
||||
|
||||
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
||||
MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:wm8350-hwmon");
|
|
@ -1472,6 +1472,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
|
|||
&(wm8350->codec.pdev));
|
||||
wm8350_client_dev_register(wm8350, "wm8350-gpio",
|
||||
&(wm8350->gpio.pdev));
|
||||
wm8350_client_dev_register(wm8350, "wm8350-hwmon",
|
||||
&(wm8350->hwmon.pdev));
|
||||
wm8350_client_dev_register(wm8350, "wm8350-power",
|
||||
&(wm8350->power.pdev));
|
||||
wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
|
||||
|
@ -1498,6 +1500,7 @@ void wm8350_device_exit(struct wm8350 *wm8350)
|
|||
platform_device_unregister(wm8350->wdt.pdev);
|
||||
platform_device_unregister(wm8350->rtc.pdev);
|
||||
platform_device_unregister(wm8350->power.pdev);
|
||||
platform_device_unregister(wm8350->hwmon.pdev);
|
||||
platform_device_unregister(wm8350->gpio.pdev);
|
||||
platform_device_unregister(wm8350->codec.pdev);
|
||||
|
||||
|
|
|
@ -605,6 +605,11 @@ struct wm8350_irq {
|
|||
void *data;
|
||||
};
|
||||
|
||||
struct wm8350_hwmon {
|
||||
struct platform_device *pdev;
|
||||
struct device *classdev;
|
||||
};
|
||||
|
||||
struct wm8350 {
|
||||
struct device *dev;
|
||||
|
||||
|
@ -629,6 +634,7 @@ struct wm8350 {
|
|||
/* Client devices */
|
||||
struct wm8350_codec codec;
|
||||
struct wm8350_gpio gpio;
|
||||
struct wm8350_hwmon hwmon;
|
||||
struct wm8350_pmic pmic;
|
||||
struct wm8350_power power;
|
||||
struct wm8350_rtc rtc;
|
||||
|
|
Загрузка…
Ссылка в новой задаче