powerpc/mpc85xx:Add initial device tree support of T104x
The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
processor cores with high-performance data path acceleration architecture
and network peripheral interfaces required for networking & telecommunications.
T1042 personality is a reduced personality of T1040 without Integrated 8-port
Gigabit Ethernet switch.
The T1040/T1042 SoC includes the following function and features:
- Four e5500 cores, each with a private 256 KB L2 cache
- 256 KB shared L3 CoreNet platform cache (CPC)
- Interconnect CoreNet platform
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
support
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
for the following functions:
- Packet parsing, classification, and distribution
- Queue management for scheduling, packet sequencing, and congestion
management
- Cryptography Acceleration (SEC 5.0)
- RegEx Pattern Matching Acceleration (PME 2.2)
- IEEE Std 1588 support
- Hardware buffer management for buffer allocation and deallocation
- Ethernet interfaces
- Integrated 8-port Gigabit Ethernet switch (T1040 only)
- Four 1 Gbps Ethernet controllers
- Two RGMII interfaces or one RGMII and one MII interfaces
- High speed peripheral interfaces
- Four PCI Express 2.0 controllers running at up to 5 GHz
- Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
- Upto two QSGMII interface
- Upto six SGMII interface supporting 1000 Mbps
- One SGMII interface supporting upto 2500 Mbps
- Additional peripheral interfaces
- Two USB 2.0 controllers with integrated PHY
- SD/eSDHC/eMMC
- eSPI controller
- Four I2C controllers
- Four UARTs
- Four GPIO controllers
- Integrated flash controller (IFC)
- Change this to LCD/ HDMI interface (DIU) with 12 bit dual data rate
- TDM interface
- Multicore programmable interrupt controller (PIC)
- Two 8-channel DMA engines
- Single source clocking implementation
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Prabhakar Kushwaha
Scott Wood
Родитель
846c944357
Коммит
fb734eeebf
|
|
@ -0,0 +1,430 @@
|
|||
/*
|
||||
* T1040 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2013 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&ifc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,ifc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
interrupts = <20 2 0 0>;
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <20 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&pci1 {
|
||||
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
interrupts = <21 2 0 0>;
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <21 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&pci2 {
|
||||
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
interrupts = <22 2 0 0>;
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <22 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&pci3 {
|
||||
compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
interrupts = <23 2 0 0>;
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <23 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 43 1 0 0
|
||||
0000 0 0 2 &mpic 0 1 0 0
|
||||
0000 0 0 3 &mpic 4 1 0 0
|
||||
0000 0 0 4 &mpic 8 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
|
||||
reg = <0x1000 0x1000 0x1002000 0x10000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0x1A000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-snpc@30000 {
|
||||
compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
|
||||
reg = <0x30000 0x1000 0x1022000 0x10000>;
|
||||
};
|
||||
dcsr-snpc@31000 {
|
||||
compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
|
||||
reg = <0x31000 0x1000 0x1042000 0x10000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@100000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x100000 0x1000 0x101000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@108000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x108000 0x1000 0x109000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@110000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu2>;
|
||||
reg = <0x110000 0x1000 0x111000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@118000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu3>;
|
||||
reg = <0x118000 0x1000 0x119000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <16>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v5.0",
|
||||
"fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,t1040-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000>;
|
||||
interrupts = <16 2 1 27>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x1000>;
|
||||
ranges = <0 0x20000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
pamu0: pamu@0 {
|
||||
reg = <0 0x1000>;
|
||||
fsl,primary-cache-geometry = <128 1>;
|
||||
fsl,secondary-cache-geometry = <16 2>;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
|
||||
ranges = <0x0 0xe1000 0x1000>;
|
||||
reg = <0xe1000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
sysclk: sysclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fsl,qoriq-sysclk-2.0";
|
||||
clock-output-names = "sysclk", "fixed-clock";
|
||||
};
|
||||
|
||||
|
||||
pll0: pll0@800 {
|
||||
#clock-cells = <1>;
|
||||
reg = <0x800 4>;
|
||||
compatible = "fsl,qoriq-core-pll-2.0";
|
||||
clocks = <&sysclk>;
|
||||
clock-output-names = "pll0", "pll0-div2", "pll0-div4";
|
||||
};
|
||||
|
||||
pll1: pll1@820 {
|
||||
#clock-cells = <1>;
|
||||
reg = <0x820 4>;
|
||||
compatible = "fsl,qoriq-core-pll-2.0";
|
||||
clocks = <&sysclk>;
|
||||
clock-output-names = "pll1", "pll1-div2", "pll1-div4";
|
||||
};
|
||||
|
||||
mux0: mux0@0 {
|
||||
#clock-cells = <0>;
|
||||
reg = <0x0 4>;
|
||||
compatible = "fsl,qoriq-core-mux-2.0";
|
||||
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
|
||||
<&pll1 0>, <&pll1 1>, <&pll1 2>;
|
||||
clock-names = "pll0", "pll0-div2", "pll1-div4",
|
||||
"pll1", "pll1-div2", "pll1-div4";
|
||||
clock-output-names = "cmux0";
|
||||
};
|
||||
|
||||
mux1: mux1@20 {
|
||||
#clock-cells = <0>;
|
||||
reg = <0x20 4>;
|
||||
compatible = "fsl,qoriq-core-mux-2.0";
|
||||
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
|
||||
<&pll1 0>, <&pll1 1>, <&pll1 2>;
|
||||
clock-names = "pll0", "pll0-div2", "pll1-div4",
|
||||
"pll1", "pll1-div2", "pll1-div4";
|
||||
clock-output-names = "cmux1";
|
||||
};
|
||||
|
||||
mux2: mux2@40 {
|
||||
#clock-cells = <0>;
|
||||
reg = <0x40 4>;
|
||||
compatible = "fsl,qoriq-core-mux-2.0";
|
||||
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
|
||||
<&pll1 0>, <&pll1 1>, <&pll1 2>;
|
||||
clock-names = "pll0", "pll0-div2", "pll1-div4",
|
||||
"pll1", "pll1-div2", "pll1-div4";
|
||||
clock-output-names = "cmux2";
|
||||
};
|
||||
|
||||
mux3: mux3@60 {
|
||||
#clock-cells = <0>;
|
||||
reg = <0x60 4>;
|
||||
compatible = "fsl,qoriq-core-mux-2.0";
|
||||
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
|
||||
<&pll1 0>, <&pll1 1>, <&pll1 2>;
|
||||
clock-names = "pll0_0", "pll0_1", "pll0_2",
|
||||
"pll1_0", "pll1_1", "pll1_2";
|
||||
clock-output-names = "cmux3";
|
||||
};
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,t1040-sfp";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,t1040-serdes";
|
||||
reg = <0xea000 0x4000>;
|
||||
};
|
||||
|
||||
/include/ "elo3-dma-0.dtsi"
|
||||
/include/ "elo3-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
compatible = "fsl,t1040-esdhc", "fsl,esdhc";
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-gpio-1.dtsi"
|
||||
/include/ "qoriq-gpio-2.dtsi"
|
||||
/include/ "qoriq-gpio-3.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb0: usb@210000 {
|
||||
compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
|
||||
phy_type = "utmi";
|
||||
port0;
|
||||
};
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb1: usb@211000 {
|
||||
compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
display@180000 {
|
||||
compatible = "fsl,t1040-diu", "fsl,diu";
|
||||
reg = <0x180000 1000>;
|
||||
interrupts = <74 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-sata2-0.dtsi"
|
||||
sata@220000 {
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
|
||||
};
|
||||
/include/ "qoriq-sata2-1.dtsi"
|
||||
sata@221000 {
|
||||
fsl,iommu-parent = <&pamu0>;
|
||||
fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
|
||||
};
|
||||
/include/ "qoriq-sec5.0-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
/*
|
||||
* T1042 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2013 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "t1040si-post.dtsi"
|
||||
|
||||
/* Place holder for ethernet related device tree nodes */
|
||||
|
|
@ -0,0 +1,104 @@
|
|||
/*
|
||||
* T1040/T1042 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2013 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e5500_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
pci3 = &pci3;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
sdhc = &sdhc;
|
||||
|
||||
crypto = &crypto;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e5500@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
clocks = <&mux0>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e5500@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
clocks = <&mux1>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e5500@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
clocks = <&mux2>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e5500@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
clocks = <&mux3>;
|
||||
next-level-cache = <&L2_4>;
|
||||
L2_4: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче