Input: edt-ft5x06 - add support for M09 firmware version
There is a new firmware version for the EDT-FT5x06 chip. Add support for detecting the firmware version and handle the differences appropriately. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Lothar Waßmann
Dmitry Torokhov
Родитель
ee3e946e31
Коммит
fd335ab04b
|
|
@ -1,5 +1,6 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
|
||||
* Daniel Wagener <daniel.wagener@kernelconcepts.de> (M09 firmware support)
|
||||
* Lothar Waßmann <LW@KARO-electronics.de> (DT support)
|
||||
*
|
||||
* This software is licensed under the terms of the GNU General Public
|
||||
|
|
@ -47,6 +48,14 @@
|
|||
#define WORK_REGISTER_NUM_X 0x33
|
||||
#define WORK_REGISTER_NUM_Y 0x34
|
||||
|
||||
#define M09_REGISTER_THRESHOLD 0x80
|
||||
#define M09_REGISTER_GAIN 0x92
|
||||
#define M09_REGISTER_OFFSET 0x93
|
||||
#define M09_REGISTER_NUM_X 0x94
|
||||
#define M09_REGISTER_NUM_Y 0x95
|
||||
|
||||
#define NO_REGISTER 0xff
|
||||
|
||||
#define WORK_REGISTER_OPMODE 0x3c
|
||||
#define FACTORY_REGISTER_OPMODE 0x01
|
||||
|
||||
|
|
@ -61,6 +70,20 @@
|
|||
#define EDT_RAW_DATA_RETRIES 100
|
||||
#define EDT_RAW_DATA_DELAY 1 /* msec */
|
||||
|
||||
enum edt_ver {
|
||||
M06,
|
||||
M09,
|
||||
};
|
||||
|
||||
struct edt_reg_addr {
|
||||
int reg_threshold;
|
||||
int reg_report_rate;
|
||||
int reg_gain;
|
||||
int reg_offset;
|
||||
int reg_num_x;
|
||||
int reg_num_y;
|
||||
};
|
||||
|
||||
struct edt_ft5x06_ts_data {
|
||||
struct i2c_client *client;
|
||||
struct input_dev *input;
|
||||
|
|
@ -85,6 +108,9 @@ struct edt_ft5x06_ts_data {
|
|||
int report_rate;
|
||||
|
||||
char name[EDT_NAME_LEN];
|
||||
|
||||
struct edt_reg_addr reg_addr;
|
||||
enum edt_ver version;
|
||||
};
|
||||
|
||||
static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
|
||||
|
|
@ -142,33 +168,58 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
|
|||
{
|
||||
struct edt_ft5x06_ts_data *tsdata = dev_id;
|
||||
struct device *dev = &tsdata->client->dev;
|
||||
u8 cmd = 0xf9;
|
||||
u8 rdbuf[26];
|
||||
u8 cmd;
|
||||
u8 rdbuf[29];
|
||||
int i, type, x, y, id;
|
||||
int offset, tplen, datalen;
|
||||
int error;
|
||||
|
||||
switch (tsdata->version) {
|
||||
case M06:
|
||||
cmd = 0xf9; /* tell the controller to send touch data */
|
||||
offset = 5; /* where the actual touch data starts */
|
||||
tplen = 4; /* data comes in so called frames */
|
||||
datalen = 26; /* how much bytes to listen for */
|
||||
break;
|
||||
|
||||
case M09:
|
||||
cmd = 0x02;
|
||||
offset = 1;
|
||||
tplen = 6;
|
||||
datalen = 29;
|
||||
break;
|
||||
|
||||
default:
|
||||
goto out;
|
||||
}
|
||||
|
||||
memset(rdbuf, 0, sizeof(rdbuf));
|
||||
|
||||
error = edt_ft5x06_ts_readwrite(tsdata->client,
|
||||
sizeof(cmd), &cmd,
|
||||
sizeof(rdbuf), rdbuf);
|
||||
datalen, rdbuf);
|
||||
if (error) {
|
||||
dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
|
||||
error);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != 26) {
|
||||
dev_err_ratelimited(dev, "Unexpected header: %02x%02x%02x!\n",
|
||||
rdbuf[0], rdbuf[1], rdbuf[2]);
|
||||
goto out;
|
||||
/* M09 does not send header or CRC */
|
||||
if (tsdata->version == M06) {
|
||||
if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa ||
|
||||
rdbuf[2] != datalen) {
|
||||
dev_err_ratelimited(dev,
|
||||
"Unexpected header: %02x%02x%02x!\n",
|
||||
rdbuf[0], rdbuf[1], rdbuf[2]);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, 26))
|
||||
goto out;
|
||||
|
||||
for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
|
||||
u8 *buf = &rdbuf[i * 4 + 5];
|
||||
u8 *buf = &rdbuf[i * tplen + offset];
|
||||
bool down;
|
||||
|
||||
type = buf[0] >> 6;
|
||||
|
|
@ -176,8 +227,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
|
|||
if (type == TOUCH_EVENT_RESERVED)
|
||||
continue;
|
||||
|
||||
/* ignore TOUCH_DOWN events, might have bogus coordinates */
|
||||
if (type == TOUCH_EVENT_DOWN)
|
||||
/* M06 sometimes sends bogus coordinates in TOUCH_DOWN */
|
||||
if (tsdata->version == M06 && type == TOUCH_EVENT_DOWN)
|
||||
continue;
|
||||
|
||||
x = ((buf[0] << 8) | buf[1]) & 0x0fff;
|
||||
|
|
@ -207,12 +258,25 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
|
|||
{
|
||||
u8 wrbuf[4];
|
||||
|
||||
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
|
||||
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
||||
wrbuf[2] = value;
|
||||
wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
|
||||
switch (tsdata->version) {
|
||||
case M06:
|
||||
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
|
||||
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
||||
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
||||
wrbuf[2] = value;
|
||||
wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
|
||||
return edt_ft5x06_ts_readwrite(tsdata->client, 4,
|
||||
wrbuf, 0, NULL);
|
||||
case M09:
|
||||
wrbuf[0] = addr;
|
||||
wrbuf[1] = value;
|
||||
|
||||
return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL);
|
||||
return edt_ft5x06_ts_readwrite(tsdata->client, 3,
|
||||
wrbuf, 0, NULL);
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
|
||||
|
|
@ -221,19 +285,35 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
|
|||
u8 wrbuf[2], rdbuf[2];
|
||||
int error;
|
||||
|
||||
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
|
||||
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
||||
wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
|
||||
switch (tsdata->version) {
|
||||
case M06:
|
||||
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
|
||||
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
||||
wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
|
||||
|
||||
error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2, rdbuf);
|
||||
if (error)
|
||||
error = edt_ft5x06_ts_readwrite(tsdata->client,
|
||||
2, wrbuf, 2, rdbuf);
|
||||
return error;
|
||||
|
||||
if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
|
||||
dev_err(&tsdata->client->dev,
|
||||
"crc error: 0x%02x expected, got 0x%02x\n",
|
||||
wrbuf[0] ^ wrbuf[1] ^ rdbuf[0], rdbuf[1]);
|
||||
return -EIO;
|
||||
if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
|
||||
dev_err(&tsdata->client->dev,
|
||||
"crc error: 0x%02x expected, got 0x%02x\n",
|
||||
wrbuf[0] ^ wrbuf[1] ^ rdbuf[0],
|
||||
rdbuf[1]);
|
||||
return -EIO;
|
||||
}
|
||||
break;
|
||||
|
||||
case M09:
|
||||
wrbuf[0] = addr;
|
||||
error = edt_ft5x06_ts_readwrite(tsdata->client, 1,
|
||||
wrbuf, 1, rdbuf);
|
||||
if (error)
|
||||
return error;
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return rdbuf[0];
|
||||
|
|
@ -244,19 +324,21 @@ struct edt_ft5x06_attribute {
|
|||
size_t field_offset;
|
||||
u8 limit_low;
|
||||
u8 limit_high;
|
||||
u8 addr;
|
||||
u8 addr_m06;
|
||||
u8 addr_m09;
|
||||
};
|
||||
|
||||
#define EDT_ATTR(_field, _mode, _addr, _limit_low, _limit_high) \
|
||||
#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, \
|
||||
_limit_low, _limit_high) \
|
||||
struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = { \
|
||||
.dattr = __ATTR(_field, _mode, \
|
||||
edt_ft5x06_setting_show, \
|
||||
edt_ft5x06_setting_store), \
|
||||
.field_offset = \
|
||||
offsetof(struct edt_ft5x06_ts_data, _field), \
|
||||
.field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \
|
||||
.addr_m06 = _addr_m06, \
|
||||
.addr_m09 = _addr_m09, \
|
||||
.limit_low = _limit_low, \
|
||||
.limit_high = _limit_high, \
|
||||
.addr = _addr, \
|
||||
}
|
||||
|
||||
static ssize_t edt_ft5x06_setting_show(struct device *dev,
|
||||
|
|
@ -271,6 +353,7 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev,
|
|||
int val;
|
||||
size_t count = 0;
|
||||
int error = 0;
|
||||
u8 addr;
|
||||
|
||||
mutex_lock(&tsdata->mutex);
|
||||
|
||||
|
|
@ -279,15 +362,33 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev,
|
|||
goto out;
|
||||
}
|
||||
|
||||
val = edt_ft5x06_register_read(tsdata, attr->addr);
|
||||
if (val < 0) {
|
||||
error = val;
|
||||
dev_err(&tsdata->client->dev,
|
||||
"Failed to fetch attribute %s, error %d\n",
|
||||
dattr->attr.name, error);
|
||||
switch (tsdata->version) {
|
||||
case M06:
|
||||
addr = attr->addr_m06;
|
||||
break;
|
||||
|
||||
case M09:
|
||||
addr = attr->addr_m09;
|
||||
break;
|
||||
|
||||
default:
|
||||
error = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (addr != NO_REGISTER) {
|
||||
val = edt_ft5x06_register_read(tsdata, addr);
|
||||
if (val < 0) {
|
||||
error = val;
|
||||
dev_err(&tsdata->client->dev,
|
||||
"Failed to fetch attribute %s, error %d\n",
|
||||
dattr->attr.name, error);
|
||||
goto out;
|
||||
}
|
||||
} else {
|
||||
val = *field;
|
||||
}
|
||||
|
||||
if (val != *field) {
|
||||
dev_warn(&tsdata->client->dev,
|
||||
"%s: read (%d) and stored value (%d) differ\n",
|
||||
|
|
@ -312,6 +413,7 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev,
|
|||
u8 *field = (u8 *)tsdata + attr->field_offset;
|
||||
unsigned int val;
|
||||
int error;
|
||||
u8 addr;
|
||||
|
||||
mutex_lock(&tsdata->mutex);
|
||||
|
||||
|
|
@ -329,14 +431,29 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev,
|
|||
goto out;
|
||||
}
|
||||
|
||||
error = edt_ft5x06_register_write(tsdata, attr->addr, val);
|
||||
if (error) {
|
||||
dev_err(&tsdata->client->dev,
|
||||
"Failed to update attribute %s, error: %d\n",
|
||||
dattr->attr.name, error);
|
||||
switch (tsdata->version) {
|
||||
case M06:
|
||||
addr = attr->addr_m06;
|
||||
break;
|
||||
|
||||
case M09:
|
||||
addr = attr->addr_m09;
|
||||
break;
|
||||
|
||||
default:
|
||||
error = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (addr != NO_REGISTER) {
|
||||
error = edt_ft5x06_register_write(tsdata, addr, val);
|
||||
if (error) {
|
||||
dev_err(&tsdata->client->dev,
|
||||
"Failed to update attribute %s, error: %d\n",
|
||||
dattr->attr.name, error);
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
*field = val;
|
||||
|
||||
out:
|
||||
|
|
@ -344,12 +461,14 @@ out:
|
|||
return error ?: count;
|
||||
}
|
||||
|
||||
static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, 0, 31);
|
||||
static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, 0, 31);
|
||||
static EDT_ATTR(threshold, S_IWUSR | S_IRUGO,
|
||||
WORK_REGISTER_THRESHOLD, 20, 80);
|
||||
static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO,
|
||||
WORK_REGISTER_REPORT_RATE, 3, 14);
|
||||
static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
|
||||
M09_REGISTER_GAIN, 0, 31);
|
||||
static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
|
||||
M09_REGISTER_OFFSET, 0, 31);
|
||||
static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
|
||||
M09_REGISTER_THRESHOLD, 20, 80);
|
||||
static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
|
||||
NO_REGISTER, 3, 14);
|
||||
|
||||
static struct attribute *edt_ft5x06_attrs[] = {
|
||||
&edt_ft5x06_attr_gain.dattr.attr,
|
||||
|
|
@ -384,6 +503,9 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
|
|||
}
|
||||
|
||||
/* mode register is 0x3c when in the work mode */
|
||||
if (tsdata->version == M09)
|
||||
goto m09_out;
|
||||
|
||||
error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
|
|
@ -416,12 +538,18 @@ err_out:
|
|||
enable_irq(client->irq);
|
||||
|
||||
return error;
|
||||
|
||||
m09_out:
|
||||
dev_err(&client->dev, "No factory mode support for M09\n");
|
||||
return -EINVAL;
|
||||
|
||||
}
|
||||
|
||||
static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
|
||||
{
|
||||
struct i2c_client *client = tsdata->client;
|
||||
int retries = EDT_SWITCH_MODE_RETRIES;
|
||||
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
||||
int ret;
|
||||
int error;
|
||||
|
||||
|
|
@ -454,13 +582,14 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
|
|||
tsdata->raw_buffer = NULL;
|
||||
|
||||
/* restore parameters */
|
||||
edt_ft5x06_register_write(tsdata, WORK_REGISTER_THRESHOLD,
|
||||
edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
|
||||
tsdata->threshold);
|
||||
edt_ft5x06_register_write(tsdata, WORK_REGISTER_GAIN,
|
||||
edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
|
||||
tsdata->gain);
|
||||
edt_ft5x06_register_write(tsdata, WORK_REGISTER_OFFSET,
|
||||
edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
|
||||
tsdata->offset);
|
||||
edt_ft5x06_register_write(tsdata, WORK_REGISTER_REPORT_RATE,
|
||||
if (reg_addr->reg_report_rate)
|
||||
edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
|
||||
tsdata->report_rate);
|
||||
|
||||
enable_irq(client->irq);
|
||||
|
|
@ -663,30 +792,60 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
|
|||
}
|
||||
|
||||
static int edt_ft5x06_ts_identify(struct i2c_client *client,
|
||||
char *model_name,
|
||||
char *fw_version)
|
||||
struct edt_ft5x06_ts_data *tsdata,
|
||||
char *fw_version)
|
||||
{
|
||||
u8 rdbuf[EDT_NAME_LEN];
|
||||
char *p;
|
||||
int error;
|
||||
char *model_name = tsdata->name;
|
||||
|
||||
/* see what we find if we assume it is a M06 *
|
||||
* if we get less than EDT_NAME_LEN, we don't want
|
||||
* to have garbage in there
|
||||
*/
|
||||
memset(rdbuf, 0, sizeof(rdbuf));
|
||||
error = edt_ft5x06_ts_readwrite(client, 1, "\xbb",
|
||||
EDT_NAME_LEN - 1, rdbuf);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
/* remove last '$' end marker */
|
||||
rdbuf[EDT_NAME_LEN - 1] = '\0';
|
||||
if (rdbuf[EDT_NAME_LEN - 2] == '$')
|
||||
rdbuf[EDT_NAME_LEN - 2] = '\0';
|
||||
/* if we find something consistent, stay with that assumption
|
||||
* at least M09 won't send 3 bytes here
|
||||
*/
|
||||
if (!(strnicmp(rdbuf + 1, "EP0", 3))) {
|
||||
tsdata->version = M06;
|
||||
|
||||
/* look for Model/Version separator */
|
||||
p = strchr(rdbuf, '*');
|
||||
if (p)
|
||||
*p++ = '\0';
|
||||
/* remove last '$' end marker */
|
||||
rdbuf[EDT_NAME_LEN - 1] = '\0';
|
||||
if (rdbuf[EDT_NAME_LEN - 2] == '$')
|
||||
rdbuf[EDT_NAME_LEN - 2] = '\0';
|
||||
|
||||
strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
|
||||
strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
|
||||
/* look for Model/Version separator */
|
||||
p = strchr(rdbuf, '*');
|
||||
if (p)
|
||||
*p++ = '\0';
|
||||
strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
|
||||
strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
|
||||
} else {
|
||||
/* since there are only two versions around (M06, M09) */
|
||||
tsdata->version = M09;
|
||||
|
||||
error = edt_ft5x06_ts_readwrite(client, 1, "\xA6",
|
||||
2, rdbuf);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
strlcpy(fw_version, rdbuf, 2);
|
||||
|
||||
error = edt_ft5x06_ts_readwrite(client, 1, "\xA8",
|
||||
1, rdbuf);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09",
|
||||
rdbuf[0] >> 4, rdbuf[0] & 0x0F);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -705,36 +864,69 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
|
|||
static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np,
|
||||
struct edt_ft5x06_ts_data *tsdata)
|
||||
{
|
||||
EDT_GET_PROP(threshold, WORK_REGISTER_THRESHOLD);
|
||||
EDT_GET_PROP(gain, WORK_REGISTER_GAIN);
|
||||
EDT_GET_PROP(offset, WORK_REGISTER_OFFSET);
|
||||
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
||||
|
||||
EDT_GET_PROP(threshold, reg_addr->reg_threshold);
|
||||
EDT_GET_PROP(gain, reg_addr->reg_gain);
|
||||
EDT_GET_PROP(offset, reg_addr->reg_offset);
|
||||
}
|
||||
|
||||
static void
|
||||
edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata,
|
||||
const struct edt_ft5x06_platform_data *pdata)
|
||||
{
|
||||
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
||||
|
||||
if (!pdata->use_parameters)
|
||||
return;
|
||||
|
||||
/* pick up defaults from the platform data */
|
||||
EDT_ATTR_CHECKSET(threshold, WORK_REGISTER_THRESHOLD);
|
||||
EDT_ATTR_CHECKSET(gain, WORK_REGISTER_GAIN);
|
||||
EDT_ATTR_CHECKSET(offset, WORK_REGISTER_OFFSET);
|
||||
EDT_ATTR_CHECKSET(report_rate, WORK_REGISTER_REPORT_RATE);
|
||||
EDT_ATTR_CHECKSET(threshold, reg_addr->reg_threshold);
|
||||
EDT_ATTR_CHECKSET(gain, reg_addr->reg_gain);
|
||||
EDT_ATTR_CHECKSET(offset, reg_addr->reg_offset);
|
||||
if (reg_addr->reg_report_rate != NO_REGISTER)
|
||||
EDT_ATTR_CHECKSET(report_rate, reg_addr->reg_report_rate);
|
||||
}
|
||||
|
||||
static void
|
||||
edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
|
||||
{
|
||||
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
||||
|
||||
tsdata->threshold = edt_ft5x06_register_read(tsdata,
|
||||
WORK_REGISTER_THRESHOLD);
|
||||
tsdata->gain = edt_ft5x06_register_read(tsdata, WORK_REGISTER_GAIN);
|
||||
tsdata->offset = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OFFSET);
|
||||
tsdata->report_rate = edt_ft5x06_register_read(tsdata,
|
||||
WORK_REGISTER_REPORT_RATE);
|
||||
tsdata->num_x = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_X);
|
||||
tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y);
|
||||
reg_addr->reg_threshold);
|
||||
tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain);
|
||||
tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
|
||||
if (reg_addr->reg_report_rate != NO_REGISTER)
|
||||
tsdata->report_rate = edt_ft5x06_register_read(tsdata,
|
||||
reg_addr->reg_report_rate);
|
||||
tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x);
|
||||
tsdata->num_y = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_y);
|
||||
}
|
||||
|
||||
static void
|
||||
edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
|
||||
{
|
||||
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
||||
|
||||
switch (tsdata->version) {
|
||||
case M06:
|
||||
reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD;
|
||||
reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE;
|
||||
reg_addr->reg_gain = WORK_REGISTER_GAIN;
|
||||
reg_addr->reg_offset = WORK_REGISTER_OFFSET;
|
||||
reg_addr->reg_num_x = WORK_REGISTER_NUM_X;
|
||||
reg_addr->reg_num_y = WORK_REGISTER_NUM_Y;
|
||||
break;
|
||||
|
||||
case M09:
|
||||
reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
|
||||
reg_addr->reg_gain = M09_REGISTER_GAIN;
|
||||
reg_addr->reg_offset = M09_REGISTER_OFFSET;
|
||||
reg_addr->reg_num_x = M09_REGISTER_NUM_X;
|
||||
reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
|
|
@ -818,12 +1010,14 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
|
|||
tsdata->input = input;
|
||||
tsdata->factory_mode = false;
|
||||
|
||||
error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
|
||||
error = edt_ft5x06_ts_identify(client, tsdata, fw_version);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "touchscreen probe failed\n");
|
||||
return error;
|
||||
}
|
||||
|
||||
edt_ft5x06_ts_set_regs(tsdata);
|
||||
|
||||
if (!pdata)
|
||||
edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata);
|
||||
else
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче