microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

typhoon: update to new VLAN acceleration model 

Also correct the byteswapping as we keep the TCI in host order.

Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David Dillow 2010-10-24 10:20:21 +00:00 коммит произвёл David S. Miller
Родитель 154ccd82e1
Коммит fd59cba4f0
1 изменённых файлов: 25 добавлений и 63 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

88
drivers/net/typhoon.c
Просмотреть файл

@ -24,10 +24,6 @@
3XP Processor. It has been tested on x86 and sparc64.
KNOWN ISSUES:
*) The current firmware always strips the VLAN tag off, even if
we tell it not to. You should filter VLANs at the switch
as a workaround (good practice in any event) until we can
get this fixed.
*) Cannot DMA Rx packets to a 2 byte aligned address. Also firmware
issue. Hopefully 3Com will fix it.
*) Waiting for a command response takes 8ms due to non-preemptable
@ -280,8 +276,6 @@ struct typhoon {
struct pci_dev * pdev;
struct net_device * dev;
struct napi_struct napi;
spinlock_t state_lock;
struct vlan_group * vlgrp;
struct basic_ring rxHiRing;
struct basic_ring rxBuffRing;
struct rxbuff_ent rxbuffers[RXENT_ENTRIES];
@ -695,44 +689,6 @@ out:
return err;
}
static void
typhoon_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
{
struct typhoon *tp = netdev_priv(dev);
struct cmd_desc xp_cmd;
int err;
spin_lock_bh(&tp->state_lock);
if(!tp->vlgrp != !grp) {
/* We've either been turned on for the first time, or we've
* been turned off. Update the 3XP.
*/
if(grp)
tp->offload |= TYPHOON_OFFLOAD_VLAN;
else
tp->offload &= ~TYPHOON_OFFLOAD_VLAN;
/* If the interface is up, the runtime is running -- and we
* must be up for the vlan core to call us.
*
* Do the command outside of the spin lock, as it is slow.
*/
INIT_COMMAND_WITH_RESPONSE(&xp_cmd,
TYPHOON_CMD_SET_OFFLOAD_TASKS);
xp_cmd.parm2 = tp->offload;
xp_cmd.parm3 = tp->offload;
spin_unlock_bh(&tp->state_lock);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0)
netdev_err(tp->dev, "vlan offload error %d\n", -err);
spin_lock_bh(&tp->state_lock);
}
/* now make the change visible */
tp->vlgrp = grp;
spin_unlock_bh(&tp->state_lock);
}
static inline void
typhoon_tso_fill(struct sk_buff *skb, struct transmit_ring *txRing,
u32 ring_dma)
@ -818,7 +774,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
first_txd->processFlags |=
TYPHOON_TX_PF_INSERT_VLAN | TYPHOON_TX_PF_VLAN_PRIORITY;
first_txd->processFlags |=
cpu_to_le32(ntohs(vlan_tx_tag_get(skb)) <<
cpu_to_le32(htons(vlan_tx_tag_get(skb)) <<
TYPHOON_TX_PF_VLAN_TAG_SHIFT);
}
@ -1198,6 +1154,20 @@ typhoon_get_rx_csum(struct net_device *dev)
return 1;
}
static int
typhoon_set_flags(struct net_device *dev, u32 data)
{
/* There's no way to turn off the RX VLAN offloading and stripping
* on the current 3XP firmware -- it does not respect the offload
* settings -- so we only allow the user to toggle the TX processing.
*/
if (!(data & ETH_FLAG_RXVLAN))
return -EINVAL;
return ethtool_op_set_flags(dev, data,
ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
}
static void
typhoon_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
@ -1224,6 +1194,8 @@ static const struct ethtool_ops typhoon_ethtool_ops = {
.set_sg = ethtool_op_set_sg,
.set_tso = ethtool_op_set_tso,
.get_ringparam = typhoon_get_ringparam,
.set_flags = typhoon_set_flags,
.get_flags = ethtool_op_get_flags,
};
static int
@ -1309,9 +1281,9 @@ typhoon_init_interface(struct typhoon *tp)
tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
tp->offload |= TYPHOON_OFFLOAD_VLAN;
spin_lock_init(&tp->command_lock);
spin_lock_init(&tp->state_lock);
/* Force the writes to the shared memory area out before continuing. */
wmb();
@ -1762,13 +1734,10 @@ typhoon_rx(struct typhoon *tp, struct basic_ring *rxRing, volatile __le32 * read
} else
skb_checksum_none_assert(new_skb);
spin_lock(&tp->state_lock);
if(tp->vlgrp != NULL && rx->rxStatus & TYPHOON_RX_VLAN)
vlan_hwaccel_receive_skb(new_skb, tp->vlgrp,
ntohl(rx->vlanTag) & 0xffff);
else
netif_receive_skb(new_skb);
spin_unlock(&tp->state_lock);
if (rx->rxStatus & TYPHOON_RX_VLAN)
__vlan_hwaccel_put_tag(new_skb,
ntohl(rx->vlanTag) & 0xffff);
netif_receive_skb(new_skb);
received++;
budget--;
@ -1989,11 +1958,9 @@ typhoon_start_runtime(struct typhoon *tp)
goto error_out;
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_OFFLOAD_TASKS);
spin_lock_bh(&tp->state_lock);
xp_cmd.parm2 = tp->offload;
xp_cmd.parm3 = tp->offload;
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
spin_unlock_bh(&tp->state_lock);
if(err < 0)
goto error_out;
@ -2231,13 +2198,9 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
if(!netif_running(dev))
return 0;
spin_lock_bh(&tp->state_lock);
if(tp->vlgrp && tp->wol_events & TYPHOON_WAKE_MAGIC_PKT) {
spin_unlock_bh(&tp->state_lock);
netdev_err(dev, "cannot do WAKE_MAGIC with VLANS\n");
return -EBUSY;
}
spin_unlock_bh(&tp->state_lock);
/* TYPHOON_OFFLOAD_VLAN is always on now, so this doesn't work */
if(tp->wol_events & TYPHOON_WAKE_MAGIC_PKT)
netdev_warn(dev, "cannot do WAKE_MAGIC with VLAN offloading\n");
netif_device_detach(dev);
@ -2338,7 +2301,6 @@ static const struct net_device_ops typhoon_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = typhoon_set_mac_address,
.ndo_change_mtu = eth_change_mtu,
.ndo_vlan_rx_register = typhoon_vlan_rx_register,
};
static int __devinit