can/sja1000: add driver for EMS PCMCIA card
This patch adds the driver for the SJA1000 based PCMCIA card 'CPC-Card' from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Markus Plessing <plessing@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Oliver Hartkopp
David S. Miller
Родитель
f786ecba41
Коммит
fd734c6f25
|
|
@ -29,6 +29,13 @@ config CAN_SJA1000_OF_PLATFORM
|
|||
OpenFirmware bindings, e.g. if you have a PowerPC based system
|
||||
you may want to enable this option.
|
||||
|
||||
config CAN_EMS_PCMCIA
|
||||
tristate "EMS CPC-CARD Card"
|
||||
depends on PCMCIA
|
||||
---help---
|
||||
This driver is for the one or two channel CPC-CARD cards from
|
||||
EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
|
||||
|
||||
config CAN_EMS_PCI
|
||||
tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
|
||||
depends on PCI
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ obj-$(CONFIG_CAN_SJA1000) += sja1000.o
|
|||
obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
|
||||
obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
|
||||
obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
|
||||
obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
|
||||
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
|
||||
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
|
||||
obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,331 @@
|
|||
/*
|
||||
* Copyright (C) 2008 Sebastian Haas (initial chardev implementation)
|
||||
* Copyright (C) 2010 Markus Plessing <plessing@ems-wuensche.com>
|
||||
* Rework for mainline by Oliver Hartkopp <socketcan@hartkopp.net>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the version 2 of the GNU General Public License
|
||||
* as published by the Free Software Foundation
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <pcmcia/cistpl.h>
|
||||
#include <pcmcia/ds.h>
|
||||
#include <linux/can.h>
|
||||
#include <linux/can/dev.h>
|
||||
#include "sja1000.h"
|
||||
|
||||
#define DRV_NAME "ems_pcmcia"
|
||||
|
||||
MODULE_AUTHOR("Markus Plessing <plessing@ems-wuensche.com>");
|
||||
MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-CARD cards");
|
||||
MODULE_SUPPORTED_DEVICE("EMS CPC-CARD CAN card");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
||||
#define EMS_PCMCIA_MAX_CHAN 2
|
||||
|
||||
struct ems_pcmcia_card {
|
||||
int channels;
|
||||
struct pcmcia_device *pcmcia_dev;
|
||||
struct net_device *net_dev[EMS_PCMCIA_MAX_CHAN];
|
||||
void __iomem *base_addr;
|
||||
};
|
||||
|
||||
#define EMS_PCMCIA_CAN_CLOCK (16000000 / 2)
|
||||
|
||||
/*
|
||||
* The board configuration is probably following:
|
||||
* RX1 is connected to ground.
|
||||
* TX1 is not connected.
|
||||
* CLKO is not connected.
|
||||
* Setting the OCR register to 0xDA is a good idea.
|
||||
* This means normal output mode , push-pull and the correct polarity.
|
||||
*/
|
||||
#define EMS_PCMCIA_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
|
||||
|
||||
/*
|
||||
* In the CDR register, you should set CBP to 1.
|
||||
* You will probably also want to set the clock divider value to 7
|
||||
* (meaning direct oscillator output) because the second SJA1000 chip
|
||||
* is driven by the first one CLKOUT output.
|
||||
*/
|
||||
#define EMS_PCMCIA_CDR (CDR_CBP | CDR_CLKOUT_MASK)
|
||||
#define EMS_PCMCIA_MEM_SIZE 4096 /* Size of the remapped io-memory */
|
||||
#define EMS_PCMCIA_CAN_BASE_OFFSET 0x100 /* Offset where controllers starts */
|
||||
#define EMS_PCMCIA_CAN_CTRL_SIZE 0x80 /* Memory size for each controller */
|
||||
|
||||
#define EMS_CMD_RESET 0x00 /* Perform a reset of the card */
|
||||
#define EMS_CMD_MAP 0x03 /* Map CAN controllers into card' memory */
|
||||
#define EMS_CMD_UMAP 0x02 /* Unmap CAN controllers from card' memory */
|
||||
|
||||
static struct pcmcia_device_id ems_pcmcia_tbl[] = {
|
||||
PCMCIA_DEVICE_PROD_ID123("EMS_T_W", "CPC-Card", "V2.0", 0xeab1ea23,
|
||||
0xa338573f, 0xe4575800),
|
||||
PCMCIA_DEVICE_NULL,
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(pcmcia, ems_pcmcia_tbl);
|
||||
|
||||
static u8 ems_pcmcia_read_reg(const struct sja1000_priv *priv, int port)
|
||||
{
|
||||
return readb(priv->reg_base + port);
|
||||
}
|
||||
|
||||
static void ems_pcmcia_write_reg(const struct sja1000_priv *priv, int port,
|
||||
u8 val)
|
||||
{
|
||||
writeb(val, priv->reg_base + port);
|
||||
}
|
||||
|
||||
static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct ems_pcmcia_card *card = dev_id;
|
||||
struct net_device *dev;
|
||||
irqreturn_t retval = IRQ_NONE;
|
||||
int i, again;
|
||||
|
||||
/* Card not present */
|
||||
if (readw(card->base_addr) != 0xAA55)
|
||||
return IRQ_HANDLED;
|
||||
|
||||
do {
|
||||
again = 0;
|
||||
|
||||
/* Check interrupt for each channel */
|
||||
for (i = 0; i < card->channels; i++) {
|
||||
dev = card->net_dev[i];
|
||||
if (!dev)
|
||||
continue;
|
||||
|
||||
if (sja1000_interrupt(irq, dev) == IRQ_HANDLED)
|
||||
again = 1;
|
||||
}
|
||||
/* At least one channel handled the interrupt */
|
||||
if (again)
|
||||
retval = IRQ_HANDLED;
|
||||
|
||||
} while (again);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
/*
|
||||
* Check if a CAN controller is present at the specified location
|
||||
* by trying to set 'em into the PeliCAN mode
|
||||
*/
|
||||
static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv)
|
||||
{
|
||||
/* Make sure SJA1000 is in reset mode */
|
||||
ems_pcmcia_write_reg(priv, REG_MOD, 1);
|
||||
ems_pcmcia_write_reg(priv, REG_CDR, CDR_PELICAN);
|
||||
|
||||
/* read reset-values */
|
||||
if (ems_pcmcia_read_reg(priv, REG_CDR) == CDR_PELICAN)
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ems_pcmcia_del_card(struct pcmcia_device *pdev)
|
||||
{
|
||||
struct ems_pcmcia_card *card = pdev->priv;
|
||||
struct net_device *dev;
|
||||
int i;
|
||||
|
||||
free_irq(pdev->irq, card);
|
||||
|
||||
for (i = 0; i < card->channels; i++) {
|
||||
dev = card->net_dev[i];
|
||||
if (!dev)
|
||||
continue;
|
||||
|
||||
printk(KERN_INFO "%s: removing %s on channel #%d\n",
|
||||
DRV_NAME, dev->name, i);
|
||||
unregister_sja1000dev(dev);
|
||||
free_sja1000dev(dev);
|
||||
}
|
||||
|
||||
writeb(EMS_CMD_UMAP, card->base_addr);
|
||||
iounmap(card->base_addr);
|
||||
kfree(card);
|
||||
|
||||
pdev->priv = NULL;
|
||||
}
|
||||
|
||||
/*
|
||||
* Probe PCI device for EMS CAN signature and register each available
|
||||
* CAN channel to SJA1000 Socket-CAN subsystem.
|
||||
*/
|
||||
static int __devinit ems_pcmcia_add_card(struct pcmcia_device *pdev,
|
||||
unsigned long base)
|
||||
{
|
||||
struct sja1000_priv *priv;
|
||||
struct net_device *dev;
|
||||
struct ems_pcmcia_card *card;
|
||||
int err, i;
|
||||
|
||||
/* Allocating card structures to hold addresses, ... */
|
||||
card = kzalloc(sizeof(struct ems_pcmcia_card), GFP_KERNEL);
|
||||
if (!card)
|
||||
return -ENOMEM;
|
||||
|
||||
pdev->priv = card;
|
||||
card->channels = 0;
|
||||
|
||||
card->base_addr = ioremap(base, EMS_PCMCIA_MEM_SIZE);
|
||||
if (!card->base_addr) {
|
||||
err = -ENOMEM;
|
||||
goto failure_cleanup;
|
||||
}
|
||||
|
||||
/* Check for unique EMS CAN signature */
|
||||
if (readw(card->base_addr) != 0xAA55) {
|
||||
err = -ENODEV;
|
||||
goto failure_cleanup;
|
||||
}
|
||||
|
||||
/* Request board reset */
|
||||
writeb(EMS_CMD_RESET, card->base_addr);
|
||||
|
||||
/* Make sure CAN controllers are mapped into card's memory space */
|
||||
writeb(EMS_CMD_MAP, card->base_addr);
|
||||
|
||||
/* Detect available channels */
|
||||
for (i = 0; i < EMS_PCMCIA_MAX_CHAN; i++) {
|
||||
dev = alloc_sja1000dev(0);
|
||||
if (!dev) {
|
||||
err = -ENOMEM;
|
||||
goto failure_cleanup;
|
||||
}
|
||||
|
||||
card->net_dev[i] = dev;
|
||||
priv = netdev_priv(dev);
|
||||
priv->priv = card;
|
||||
SET_NETDEV_DEV(dev, &pdev->dev);
|
||||
|
||||
priv->irq_flags = IRQF_SHARED;
|
||||
dev->irq = pdev->irq;
|
||||
priv->reg_base = card->base_addr + EMS_PCMCIA_CAN_BASE_OFFSET +
|
||||
(i * EMS_PCMCIA_CAN_CTRL_SIZE);
|
||||
|
||||
/* Check if channel is present */
|
||||
if (ems_pcmcia_check_chan(priv)) {
|
||||
priv->read_reg = ems_pcmcia_read_reg;
|
||||
priv->write_reg = ems_pcmcia_write_reg;
|
||||
priv->can.clock.freq = EMS_PCMCIA_CAN_CLOCK;
|
||||
priv->ocr = EMS_PCMCIA_OCR;
|
||||
priv->cdr = EMS_PCMCIA_CDR;
|
||||
priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER;
|
||||
|
||||
/* Register SJA1000 device */
|
||||
err = register_sja1000dev(dev);
|
||||
if (err) {
|
||||
free_sja1000dev(dev);
|
||||
goto failure_cleanup;
|
||||
}
|
||||
|
||||
card->channels++;
|
||||
|
||||
printk(KERN_INFO "%s: registered %s on channel "
|
||||
"#%d at 0x%p, irq %d\n", DRV_NAME, dev->name,
|
||||
i, priv->reg_base, dev->irq);
|
||||
} else
|
||||
free_sja1000dev(dev);
|
||||
}
|
||||
|
||||
err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
|
||||
DRV_NAME, card);
|
||||
if (!err)
|
||||
return 0;
|
||||
|
||||
failure_cleanup:
|
||||
ems_pcmcia_del_card(pdev);
|
||||
return err;
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup PCMCIA socket and probe for EMS CPC-CARD
|
||||
*/
|
||||
static int __devinit ems_pcmcia_probe(struct pcmcia_device *dev)
|
||||
{
|
||||
int csval;
|
||||
|
||||
/* General socket configuration */
|
||||
dev->config_flags |= CONF_ENABLE_IRQ;
|
||||
dev->config_index = 1;
|
||||
dev->config_regs = PRESENT_OPTION;
|
||||
|
||||
/* The io structure describes IO port mapping */
|
||||
dev->resource[0]->end = 16;
|
||||
dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
|
||||
dev->resource[1]->end = 16;
|
||||
dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
|
||||
dev->io_lines = 5;
|
||||
|
||||
/* Allocate a memory window */
|
||||
dev->resource[2]->flags =
|
||||
(WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE);
|
||||
dev->resource[2]->start = dev->resource[2]->end = 0;
|
||||
|
||||
csval = pcmcia_request_window(dev, dev->resource[2], 0);
|
||||
if (csval) {
|
||||
dev_err(&dev->dev, "pcmcia_request_window failed (err=%d)\n",
|
||||
csval);
|
||||
return 0;
|
||||
}
|
||||
|
||||
csval = pcmcia_map_mem_page(dev, dev->resource[2], dev->config_base);
|
||||
if (csval) {
|
||||
dev_err(&dev->dev, "pcmcia_map_mem_page failed (err=%d)\n",
|
||||
csval);
|
||||
return 0;
|
||||
}
|
||||
|
||||
csval = pcmcia_enable_device(dev);
|
||||
if (csval) {
|
||||
dev_err(&dev->dev, "pcmcia_enable_device failed (err=%d)\n",
|
||||
csval);
|
||||
return 0;
|
||||
}
|
||||
|
||||
ems_pcmcia_add_card(dev, dev->resource[2]->start);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Release claimed resources
|
||||
*/
|
||||
static void ems_pcmcia_remove(struct pcmcia_device *dev)
|
||||
{
|
||||
ems_pcmcia_del_card(dev);
|
||||
pcmcia_disable_device(dev);
|
||||
}
|
||||
|
||||
static struct pcmcia_driver ems_pcmcia_driver = {
|
||||
.name = DRV_NAME,
|
||||
.probe = ems_pcmcia_probe,
|
||||
.remove = ems_pcmcia_remove,
|
||||
.id_table = ems_pcmcia_tbl,
|
||||
};
|
||||
|
||||
static int __init ems_pcmcia_init(void)
|
||||
{
|
||||
return pcmcia_register_driver(&ems_pcmcia_driver);
|
||||
}
|
||||
module_init(ems_pcmcia_init);
|
||||
|
||||
static void __exit ems_pcmcia_exit(void)
|
||||
{
|
||||
pcmcia_unregister_driver(&ems_pcmcia_driver);
|
||||
}
|
||||
module_exit(ems_pcmcia_exit);
|
||||
Загрузка…
Ссылка в новой задаче