rtc: mxc: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()

Use devm_add_action_or_reset() for calls to clk_disable_unprepare(),
which can simplify the error handling, and .remove callback can be dropped.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1584349785-27042-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
Anson Huang 2020-03-16 17:09:45 +08:00 коммит произвёл Alexandre Belloni
Родитель df11b323b1
Коммит fdc9f0eace
1 изменённых файлов: 19 добавлений и 27 удалений

Просмотреть файл

@ -307,6 +307,14 @@ static const struct rtc_class_ops mxc_rtc_ops = {
.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
};
static void mxc_rtc_action(void *p)
{
struct rtc_plat_data *pdata = p;
clk_disable_unprepare(pdata->clk_ref);
clk_disable_unprepare(pdata->clk_ipg);
}
static int mxc_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
@ -366,14 +374,20 @@ static int mxc_rtc_probe(struct platform_device *pdev)
pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
if (IS_ERR(pdata->clk_ref)) {
clk_disable_unprepare(pdata->clk_ipg);
dev_err(&pdev->dev, "unable to get ref clock!\n");
ret = PTR_ERR(pdata->clk_ref);
goto exit_put_clk_ipg;
return PTR_ERR(pdata->clk_ref);
}
ret = clk_prepare_enable(pdata->clk_ref);
if (ret) {
clk_disable_unprepare(pdata->clk_ipg);
return ret;
}
ret = devm_add_action_or_reset(&pdev->dev, mxc_rtc_action, pdata);
if (ret)
goto exit_put_clk_ipg;
return ret;
rate = clk_get_rate(pdata->clk_ref);
@ -385,16 +399,14 @@ static int mxc_rtc_probe(struct platform_device *pdev)
reg = RTC_INPUT_CLK_38400HZ;
else {
dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
ret = -EINVAL;
goto exit_put_clk_ref;
return -EINVAL;
}
reg |= RTC_ENABLE_BIT;
writew(reg, (pdata->ioaddr + RTC_RTCCTL));
if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
dev_err(&pdev->dev, "hardware module can't be enabled!\n");
ret = -EIO;
goto exit_put_clk_ref;
return -EIO;
}
platform_set_drvdata(pdev, pdata);
@ -417,29 +429,10 @@ static int mxc_rtc_probe(struct platform_device *pdev)
}
ret = rtc_register_device(rtc);
if (ret)
goto exit_put_clk_ref;
return 0;
exit_put_clk_ref:
clk_disable_unprepare(pdata->clk_ref);
exit_put_clk_ipg:
clk_disable_unprepare(pdata->clk_ipg);
return ret;
}
static int mxc_rtc_remove(struct platform_device *pdev)
{
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
clk_disable_unprepare(pdata->clk_ref);
clk_disable_unprepare(pdata->clk_ipg);
return 0;
}
static struct platform_driver mxc_rtc_driver = {
.driver = {
.name = "mxc_rtc",
@ -447,7 +440,6 @@ static struct platform_driver mxc_rtc_driver = {
},
.id_table = imx_rtc_devtype,
.probe = mxc_rtc_probe,
.remove = mxc_rtc_remove,
};
module_platform_driver(mxc_rtc_driver)