ixgbe: add MAC and PHY support for x540

Adds the new x540.c file and Aquantia 1202 PHY for X540 support.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ixgbe/Makefile

@@ -34,7 +34,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o
 
 ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
               ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
-              ixgbe_mbx.o
+              ixgbe_mbx.o ixgbe_x540.o
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o

drivers/net/ixgbe/ixgbe.h

@@ -481,10 +481,12 @@ struct ixgbe_rsc_cb {
 enum ixgbe_boards {
 	board_82598,
 	board_82599,
+	board_X540,
 };
 
 extern struct ixgbe_info ixgbe_82598_info;
 extern struct ixgbe_info ixgbe_82599_info;
+extern struct ixgbe_info ixgbe_X540_info;
 #ifdef CONFIG_IXGBE_DCB
 extern const struct dcbnl_rtnl_ops dcbnl_ops;
 extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,

drivers/net/ixgbe/ixgbe_82599.c

@@ -181,6 +181,10 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 		phy->ops.get_firmware_version =
 		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
+	case ixgbe_phy_aq:
+		phy->ops.get_firmware_version =
+			&ixgbe_get_phy_firmware_version_generic;
+		break;
 	default:
 		break;
 	}
@@ -298,7 +302,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	/* Detect if there is a copper PHY attached. */
 	if (hw->phy.type == ixgbe_phy_cu_unknown ||
-	    hw->phy.type == ixgbe_phy_tn) {
+	    hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_aq) {
 		media_type = ixgbe_media_type_copper;
 		goto out;
 	}
@@ -1890,6 +1895,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 	hw->phy.ops.identify(hw);
 
 	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_aq ||
 	    hw->phy.type == ixgbe_phy_cu_unknown) {
 		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
 				     &ext_ability);

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -214,6 +214,7 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	/* Get PHY type */
 	switch (adapter->hw.phy.type) {
 	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
 	case ixgbe_phy_cu_unknown:
 		/* Copper 10G-BASET */
 		ecmd->port = PORT_TP;

drivers/net/ixgbe/ixgbe_main.c

@@ -59,6 +59,7 @@ static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
 static const struct ixgbe_info *ixgbe_info_tbl[] = {
 	[board_82598] = &ixgbe_82598_info,
 	[board_82599] = &ixgbe_82599_info,
+	[board_X540] = &ixgbe_X540_info,
 };
 
 /* ixgbe_pci_tbl - PCI Device ID Table

drivers/net/ixgbe/ixgbe_phy.c

@@ -115,6 +115,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 	case TN1010_PHY_ID:
 		phy_type = ixgbe_phy_tn;
 		break;
+	case AQ1202_PHY_ID:
+		phy_type = ixgbe_phy_aq;
+		break;
 	case QT2022_PHY_ID:
 		phy_type = ixgbe_phy_qt;
 		break;
@@ -433,8 +436,8 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
  * Determines the link capabilities by reading the AUTOC register.
  */
 s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
-                                                      ixgbe_link_speed *speed,
-                                                      bool *autoneg)
+                                               ixgbe_link_speed *speed,
+                                               bool *autoneg)
 {
 	s32 status = IXGBE_ERR_LINK_SETUP;
 	u16 speed_ability;
@@ -1410,6 +1413,22 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
 	return status;
 }
 
+/**
+ *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+**/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                           u16 *firmware_version)
+{
+	s32 status = 0;
+
+	status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1,
+	                              firmware_version);
+
+	return status;
+}
+
 /**
  *  ixgbe_tn_check_overtemp - Checks if an overtemp occured.
  *  @hw: pointer to hardware structure

drivers/net/ixgbe/ixgbe_phy.h

@@ -106,6 +106,8 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
                              bool *link_up);
 s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
                                        u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                           u16 *firmware_version);
 
 s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
 s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);

drivers/net/ixgbe/ixgbe_type.h

@@ -995,8 +995,10 @@
 /* PHY IDs*/
 #define TN1010_PHY_ID    0x00A19410
 #define TNX_FW_REV       0xB
+#define AQ1202_PHY_ID    0x03A1B440
 #define QT2022_PHY_ID    0x0043A400
 #define ATH_PHY_ID       0x03429050
+#define AQ_FW_REV        0x20
 
 /* PHY Types */
 #define IXGBE_M88E1145_E_PHY_ID  0x01410CD0
@@ -1492,6 +1494,7 @@
 #define IXGBE_EEC_PRES      0x00000100 /* EEPROM Present */
 #define IXGBE_EEC_ARD       0x00000200 /* EEPROM Auto Read Done */
 #define IXGBE_EEC_FLUP      0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL   0x02000000 /* Sector 1 Valid */
 #define IXGBE_EEC_FLUDONE   0x04000000 /* Flash update done */
 /* EEPROM Addressing bits based on type (0-small, 1-large) */
 #define IXGBE_EEC_ADDR_SIZE 0x00000400
@@ -1506,7 +1509,9 @@
 #define IXGBE_EEPROM_SUM        0xBABA
 #define IXGBE_PCIE_ANALOG_PTR   0x03
 #define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_PHY_PTR           0x04
 #define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_OPTION_ROM_PTR    0x05
 #define IXGBE_PCIE_GENERAL_PTR  0x06
 #define IXGBE_PCIE_CONFIG0_PTR  0x07
 #define IXGBE_PCIE_CONFIG1_PTR  0x08
@@ -2173,6 +2178,7 @@ struct ixgbe_atr_input_masks {
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
 	ixgbe_eeprom_spi,
+	ixgbe_flash,
 	ixgbe_eeprom_none /* No NVM support */
 };
 
@@ -2180,12 +2186,14 @@ enum ixgbe_mac_type {
 	ixgbe_mac_unknown = 0,
 	ixgbe_mac_82598EB,
 	ixgbe_mac_82599EB,
+	ixgbe_mac_X540,
 	ixgbe_num_macs
 };
 
 enum ixgbe_phy_type {
 	ixgbe_phy_unknown = 0,
 	ixgbe_phy_tn,
+	ixgbe_phy_aq,
 	ixgbe_phy_cu_unknown,
 	ixgbe_phy_qt,
 	ixgbe_phy_xaui,
@@ -2584,6 +2592,7 @@ struct ixgbe_hw {
 	u16				subsystem_vendor_id;
 	u8				revision_id;
 	bool				adapter_stopped;
+	bool				force_full_reset;
 };
 
 struct ixgbe_info {

drivers/net/ixgbe/ixgbe_x540.c

@@ -0,0 +1,722 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2010 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+//#include "ixgbe_mbx.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES 128
+#define IXGBE_X540_MAX_RX_QUEUES 128
+#define IXGBE_X540_RAR_ENTRIES   128
+#define IXGBE_X540_MC_TBL_SIZE   128
+#define IXGBE_X540_VFT_TBL_SIZE  128
+
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
+static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+	return ixgbe_media_type_copper;
+}
+
+static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* Call PHY identify routine to get the phy type */
+	ixgbe_identify_phy_generic(hw);
+
+	mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+                              ixgbe_link_speed speed, bool autoneg,
+                              bool autoneg_wait_to_complete)
+{
+	return hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+	                                    autoneg_wait_to_complete);
+}
+
+/**
+ *  ixgbe_reset_hw_X540 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status = 0;
+	u32 ctrl;
+	u32 ctrl_ext;
+	u32 reset_bit;
+	u32 i;
+	u32 autoc;
+	u32 autoc2;
+	bool link_up = false;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	hw->mac.ops.stop_adapter(hw);
+
+	/*
+	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+	 * access and verify no pending requests before reset
+	 */
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
+		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+	}
+
+	/*
+	 * Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	if (hw->force_full_reset) {
+		reset_bit = IXGBE_CTRL_LNK_RST;
+	} else {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (!link_up)
+			reset_bit = IXGBE_CTRL_LNK_RST;
+		else
+			reset_bit = IXGBE_CTRL_RST;
+	}
+
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST))
+			break;
+	}
+	if (ctrl & IXGBE_CTRL_RST) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	/* Clear PF Reset Done bit so PF/VF Mail Ops can work */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+	msleep(50);
+
+	/* Set the Rx packet buffer size. */
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store the original AUTOC/AUTOC2 values if they have not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * values since the reset operation sets back to defaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_autoc2 = autoc2;
+		hw->mac.orig_link_settings_stored = true;
+	} else {
+		if (autoc != hw->mac.orig_autoc)
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+			                IXGBE_AUTOC_AN_RESTART));
+
+		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+		    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+			autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+			autoc2 |= (hw->mac.orig_autoc2 &
+			           IXGBE_AUTOC2_UPPER_MASK);
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		}
+	}
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+		                    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+	                           &hw->mac.wwpn_prefix);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u16 ext_ability = 0;
+
+	hw->phy.ops.identify(hw);
+
+	hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+			     &ext_ability);
+	if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+	if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+	if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+
+	return physical_layer;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+		                    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+		                          IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+		        eeprom->type, eeprom->word_size);
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_read_eerd_X540 - Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EERPOM
+ **/
+s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status;
+
+	if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM))
+		status = ixgbe_read_eerd_generic(hw, offset, data);
+	else
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of  word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	u32 eewr;
+	s32 status;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+	       (data << IXGBE_EEPROM_RW_REG_DATA) |
+	       IXGBE_EEPROM_RW_REG_START;
+
+	if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM)) {
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != 0) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			goto out;
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != 0) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			goto out;
+		}
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+out:
+	ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u16 j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+		if (hw->eeprom.ops.read(hw, i, &word) != 0) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+		checksum += word;
+	}
+
+	/*
+	 * Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		if (hw->eeprom.ops.read(hw, i, &pointer) != 0) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		if (hw->eeprom.ops.read(hw, pointer, &length) != 0) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (pointer + length) >= hw->eeprom.word_size)
+			continue;
+
+		for (j = pointer+1; j <= pointer+length; j++) {
+			if (hw->eeprom.ops.read(hw, j, &word) != 0) {
+				hw_dbg(hw, "EEPROM read failed\n");
+				break;
+			}
+			checksum += word;
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return checksum;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	status = ixgbe_update_eeprom_checksum_generic(hw);
+
+	if (status)
+		status = ixgbe_update_flash_X540(hw);
+
+	return status;
+}
+
+/**
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
+ **/
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+	u32 flup;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status == IXGBE_ERR_EEPROM) {
+		hw_dbg(hw, "Flash update time out\n");
+		goto out;
+	}
+
+	flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status)
+		hw_dbg(hw, "Flash update complete\n");
+	else
+		hw_dbg(hw, "Flash update time out\n");
+
+	if (hw->revision_id == 0) {
+		flup = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		if (flup & IXGBE_EEC_SEC1VAL) {
+			flup |= IXGBE_EEC_FLUP;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+		}
+
+		status = ixgbe_poll_flash_update_done_X540(hw);
+		if (status)
+			hw_dbg(hw, "Flash update complete\n");
+		else
+			hw_dbg(hw, "Flash update time out\n");
+
+	}
+out:
+	return status;
+}
+
+/**
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
+ **/
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 reg;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_EEC);
+		if (reg & IXGBE_EEC_FLUDONE) {
+			status = 0;
+			break;
+		}
+		udelay(5);
+	}
+	return status;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 5;
+	u32 hwmask = 0;
+	u32 timeout = 200;
+	u32 i;
+
+	if (swmask == IXGBE_GSSR_EEP_SM)
+		hwmask = IXGBE_GSSR_FLASH_SM;
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ixgbe_get_swfw_sync_semaphore(hw))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+			break;
+		} else {
+			/*
+			 * Firmware currently using resource (fwmask),
+			 * hardware currently using resource (hwmask),
+			 * or other software thread currently using
+			 * resource (swmask)
+			 */
+			ixgbe_release_swfw_sync_semaphore(hw);
+			msleep(5);
+		}
+	}
+
+	/*
+	 * If the resource is not released by the FW/HW the SW can assume that
+	 * the FW/HW malfunctions. In that case the SW should sets the
+	 * SW bit(s) of the requested resource(s) while ignoring the
+	 * corresponding FW/HW bits in the SW_FW_SYNC register.
+	 */
+	if (i >= timeout) {
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (swfw_sync & (fwmask | hwmask)) {
+			if (ixgbe_get_swfw_sync_semaphore(hw))
+				return IXGBE_ERR_SWFW_SYNC;
+
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+		}
+	}
+
+	msleep(5);
+	return 0;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore throught the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+
+	ixgbe_get_swfw_sync_semaphore(hw);
+
+	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+	swfw_sync &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+
+	ixgbe_release_swfw_sync_semaphore(hw);
+	msleep(5);
+}
+
+/**
+ * ixgbe_get_nvm_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ **/
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM;
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (!(swsm & IXGBE_SWSM_SMBI)) {
+			status = 0;
+			break;
+		}
+		udelay(50);
+	}
+
+	/* Now get the semaphore between SW/FW through the REGSMP bit */
+	if (status) {
+		for (i = 0; i < timeout; i++) {
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+			if (!(swsm & IXGBE_SWFW_REGSMP))
+				break;
+
+			udelay(50);
+		}
+	} else {
+		hw_dbg(hw, "Software semaphore SMBI between device drivers "
+		           "not granted.\n");
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_release_nvm_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	 u32 swsm;
+
+	/* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+	swsm &= ~IXGBE_SWSM_SMBI;
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+	swsm &= ~IXGBE_SWFW_REGSMP;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm);
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+static struct ixgbe_mac_operations mac_ops_X540 = {
+	.init_hw                = &ixgbe_init_hw_generic,
+	.reset_hw               = &ixgbe_reset_hw_X540,
+	.start_hw               = &ixgbe_start_hw_generic,
+	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
+	.get_media_type         = &ixgbe_get_media_type_X540,
+	.get_supported_physical_layer =
+                                  &ixgbe_get_supported_physical_layer_X540,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
+	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
+	.get_device_caps        = NULL,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
+	.stop_adapter           = &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
+	.read_analog_reg8       = NULL,
+	.write_analog_reg8      = NULL,
+	.setup_link             = &ixgbe_setup_mac_link_X540,
+	.check_link             = &ixgbe_check_mac_link_generic,
+	.get_link_capabilities  = &ixgbe_get_copper_link_capabilities_generic,
+	.led_on                 = &ixgbe_led_on_generic,
+	.led_off                = &ixgbe_led_off_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_generic,
+	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
+	.set_rar                = &ixgbe_set_rar_generic,
+	.clear_rar              = &ixgbe_clear_rar_generic,
+	.set_vmdq               = &ixgbe_set_vmdq_generic,
+	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
+	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
+	.update_uc_addr_list    = &ixgbe_update_uc_addr_list_generic,
+	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
+	.enable_mc              = &ixgbe_enable_mc_generic,
+	.disable_mc             = &ixgbe_disable_mc_generic,
+	.clear_vfta             = &ixgbe_clear_vfta_generic,
+	.set_vfta               = &ixgbe_set_vfta_generic,
+	.fc_enable              = &ixgbe_fc_enable_generic,
+	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
+	.setup_sfp              = NULL,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
+	.init_params            = &ixgbe_init_eeprom_params_X540,
+	.read                   = &ixgbe_read_eerd_X540,
+	.write                  = &ixgbe_write_eewr_X540,
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X540,
+	.validate_checksum      = &ixgbe_validate_eeprom_checksum_generic,
+	.update_checksum        = &ixgbe_update_eeprom_checksum_X540,
+};
+
+static struct ixgbe_phy_operations phy_ops_X540 = {
+	.identify               = &ixgbe_identify_phy_generic,
+	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= NULL,
+	.reset                  = &ixgbe_reset_phy_generic,
+	.read_reg               = &ixgbe_read_phy_reg_generic,
+	.write_reg              = &ixgbe_write_phy_reg_generic,
+	.setup_link             = &ixgbe_setup_phy_link_generic,
+	.setup_link_speed       = &ixgbe_setup_phy_link_speed_generic,
+	.read_i2c_byte          = &ixgbe_read_i2c_byte_generic,
+	.write_i2c_byte         = &ixgbe_write_i2c_byte_generic,
+	.read_i2c_eeprom        = &ixgbe_read_i2c_eeprom_generic,
+	.write_i2c_eeprom       = &ixgbe_write_i2c_eeprom_generic,
+	.check_overtemp         = &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_X540_info = {
+	.mac                    = ixgbe_mac_X540,
+	.get_invariants         = &ixgbe_get_invariants_X540,
+	.mac_ops                = &mac_ops_X540,
+	.eeprom_ops             = &eeprom_ops_X540,
+	.phy_ops                = &phy_ops_X540,
+	.mbx_ops                = &mbx_ops_generic,
+};