memory: pl353: Add driver for arm pl353 static memory controller
Add driver for arm pl353 static memory controller. This controller is used in Xilinx Zynq SoC for interfacing the NAND and NOR/SRAM memory devices. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This commit is contained in:
Naga Sureshkumar Relli
Michal Simek
Родитель
b0b41af12a
Коммит
fee10bd226
|
|
@ -145,6 +145,15 @@ config DA8XX_DDRCTL
|
|||
Texas Instruments da8xx SoCs. It's used to tweak various memory
|
||||
controller configuration options.
|
||||
|
||||
config PL353_SMC
|
||||
tristate "ARM PL35X Static Memory Controller(SMC) driver"
|
||||
default y
|
||||
depends on ARM
|
||||
depends on ARM_AMBA
|
||||
help
|
||||
This driver is for the ARM PL351/PL353 Static Memory
|
||||
Controller(SMC) module.
|
||||
|
||||
source "drivers/memory/samsung/Kconfig"
|
||||
source "drivers/memory/tegra/Kconfig"
|
||||
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
|
|||
obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o
|
||||
obj-$(CONFIG_MTK_SMI) += mtk-smi.o
|
||||
obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o
|
||||
obj-$(CONFIG_PL353_SMC) += pl353-smc.o
|
||||
|
||||
obj-$(CONFIG_SAMSUNG_MC) += samsung/
|
||||
obj-$(CONFIG_TEGRA_MC) += tegra/
|
||||
|
|
|
|||
|
|
@ -0,0 +1,463 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* ARM PL353 SMC driver
|
||||
*
|
||||
* Copyright (C) 2012 - 2018 Xilinx, Inc
|
||||
* Author: Punnaiah Choudary Kalluri <punnaiah@xilinx.com>
|
||||
* Author: Naga Sureshkumar Relli <nagasure@xilinx.com>
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/pl353-smc.h>
|
||||
#include <linux/amba/bus.h>
|
||||
|
||||
/* Register definitions */
|
||||
#define PL353_SMC_MEMC_STATUS_OFFS 0 /* Controller status reg, RO */
|
||||
#define PL353_SMC_CFG_CLR_OFFS 0xC /* Clear config reg, WO */
|
||||
#define PL353_SMC_DIRECT_CMD_OFFS 0x10 /* Direct command reg, WO */
|
||||
#define PL353_SMC_SET_CYCLES_OFFS 0x14 /* Set cycles register, WO */
|
||||
#define PL353_SMC_SET_OPMODE_OFFS 0x18 /* Set opmode register, WO */
|
||||
#define PL353_SMC_ECC_STATUS_OFFS 0x400 /* ECC status register */
|
||||
#define PL353_SMC_ECC_MEMCFG_OFFS 0x404 /* ECC mem config reg */
|
||||
#define PL353_SMC_ECC_MEMCMD1_OFFS 0x408 /* ECC mem cmd1 reg */
|
||||
#define PL353_SMC_ECC_MEMCMD2_OFFS 0x40C /* ECC mem cmd2 reg */
|
||||
#define PL353_SMC_ECC_VALUE0_OFFS 0x418 /* ECC value 0 reg */
|
||||
|
||||
/* Controller status register specific constants */
|
||||
#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT 6
|
||||
|
||||
/* Clear configuration register specific constants */
|
||||
#define PL353_SMC_CFG_CLR_INT_CLR_1 0x10
|
||||
#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1 0x40
|
||||
#define PL353_SMC_CFG_CLR_INT_DIS_1 0x2
|
||||
#define PL353_SMC_CFG_CLR_DEFAULT_MASK (PL353_SMC_CFG_CLR_INT_CLR_1 | \
|
||||
PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \
|
||||
PL353_SMC_CFG_CLR_INT_DIS_1)
|
||||
|
||||
/* Set cycles register specific constants */
|
||||
#define PL353_SMC_SET_CYCLES_T0_MASK 0xF
|
||||
#define PL353_SMC_SET_CYCLES_T0_SHIFT 0
|
||||
#define PL353_SMC_SET_CYCLES_T1_MASK 0xF
|
||||
#define PL353_SMC_SET_CYCLES_T1_SHIFT 4
|
||||
#define PL353_SMC_SET_CYCLES_T2_MASK 0x7
|
||||
#define PL353_SMC_SET_CYCLES_T2_SHIFT 8
|
||||
#define PL353_SMC_SET_CYCLES_T3_MASK 0x7
|
||||
#define PL353_SMC_SET_CYCLES_T3_SHIFT 11
|
||||
#define PL353_SMC_SET_CYCLES_T4_MASK 0x7
|
||||
#define PL353_SMC_SET_CYCLES_T4_SHIFT 14
|
||||
#define PL353_SMC_SET_CYCLES_T5_MASK 0x7
|
||||
#define PL353_SMC_SET_CYCLES_T5_SHIFT 17
|
||||
#define PL353_SMC_SET_CYCLES_T6_MASK 0xF
|
||||
#define PL353_SMC_SET_CYCLES_T6_SHIFT 20
|
||||
|
||||
/* ECC status register specific constants */
|
||||
#define PL353_SMC_ECC_STATUS_BUSY BIT(6)
|
||||
#define PL353_SMC_ECC_REG_SIZE_OFFS 4
|
||||
|
||||
/* ECC memory config register specific constants */
|
||||
#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC
|
||||
#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2
|
||||
#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0xC
|
||||
|
||||
#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \
|
||||
(2 << 21)) /* UpdateRegs operation */
|
||||
|
||||
#define PL353_NAND_ECC_CMD1 ((0x80) | /* Write command */ \
|
||||
(0 << 8) | /* Read command */ \
|
||||
(0x30 << 16) | /* Read End command */ \
|
||||
(1 << 24)) /* Read End command calid */
|
||||
|
||||
#define PL353_NAND_ECC_CMD2 ((0x85) | /* Write col change cmd */ \
|
||||
(5 << 8) | /* Read col change cmd */ \
|
||||
(0xE0 << 16) | /* Read col change end cmd */ \
|
||||
(1 << 24)) /* Read col change end cmd valid */
|
||||
#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ)
|
||||
/**
|
||||
* struct pl353_smc_data - Private smc driver structure
|
||||
* @memclk: Pointer to the peripheral clock
|
||||
* @aclk: Pointer to the APER clock
|
||||
*/
|
||||
struct pl353_smc_data {
|
||||
struct clk *memclk;
|
||||
struct clk *aclk;
|
||||
};
|
||||
|
||||
/* SMC virtual register base */
|
||||
static void __iomem *pl353_smc_base;
|
||||
|
||||
/**
|
||||
* pl353_smc_set_buswidth - Set memory buswidth
|
||||
* @bw: Memory buswidth (8 | 16)
|
||||
* Return: 0 on success or negative errno.
|
||||
*/
|
||||
int pl353_smc_set_buswidth(unsigned int bw)
|
||||
{
|
||||
if (bw != PL353_SMC_MEM_WIDTH_8 && bw != PL353_SMC_MEM_WIDTH_16)
|
||||
return -EINVAL;
|
||||
|
||||
writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS);
|
||||
writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
|
||||
PL353_SMC_DIRECT_CMD_OFFS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth);
|
||||
|
||||
/**
|
||||
* pl353_smc_set_cycles - Set memory timing parameters
|
||||
* @timings: NAND controller timing parameters
|
||||
*
|
||||
* Sets NAND chip specific timing parameters.
|
||||
*/
|
||||
void pl353_smc_set_cycles(u32 timings[])
|
||||
{
|
||||
/*
|
||||
* Set write pulse timing. This one is easy to extract:
|
||||
*
|
||||
* NWE_PULSE = tWP
|
||||
*/
|
||||
timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK;
|
||||
timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) <<
|
||||
PL353_SMC_SET_CYCLES_T1_SHIFT;
|
||||
timings[2] = (timings[2] & PL353_SMC_SET_CYCLES_T2_MASK) <<
|
||||
PL353_SMC_SET_CYCLES_T2_SHIFT;
|
||||
timings[3] = (timings[3] & PL353_SMC_SET_CYCLES_T3_MASK) <<
|
||||
PL353_SMC_SET_CYCLES_T3_SHIFT;
|
||||
timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) <<
|
||||
PL353_SMC_SET_CYCLES_T4_SHIFT;
|
||||
timings[5] = (timings[5] & PL353_SMC_SET_CYCLES_T5_MASK) <<
|
||||
PL353_SMC_SET_CYCLES_T5_SHIFT;
|
||||
timings[6] = (timings[6] & PL353_SMC_SET_CYCLES_T6_MASK) <<
|
||||
PL353_SMC_SET_CYCLES_T6_SHIFT;
|
||||
timings[0] |= timings[1] | timings[2] | timings[3] |
|
||||
timings[4] | timings[5] | timings[6];
|
||||
|
||||
writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS);
|
||||
writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
|
||||
PL353_SMC_DIRECT_CMD_OFFS);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_set_cycles);
|
||||
|
||||
/**
|
||||
* pl353_smc_ecc_is_busy - Read ecc busy flag
|
||||
* Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle
|
||||
*/
|
||||
bool pl353_smc_ecc_is_busy(void)
|
||||
{
|
||||
return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) &
|
||||
PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy);
|
||||
|
||||
/**
|
||||
* pl353_smc_get_ecc_val - Read ecc_valueN registers
|
||||
* @ecc_reg: Index of the ecc_value reg (0..3)
|
||||
* Return: the content of the requested ecc_value register.
|
||||
*
|
||||
* There are four valid ecc_value registers. The argument is truncated to stay
|
||||
* within this valid boundary.
|
||||
*/
|
||||
u32 pl353_smc_get_ecc_val(int ecc_reg)
|
||||
{
|
||||
u32 addr, reg;
|
||||
|
||||
addr = PL353_SMC_ECC_VALUE0_OFFS +
|
||||
(ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS);
|
||||
reg = readl(pl353_smc_base + addr);
|
||||
|
||||
return reg;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val);
|
||||
|
||||
/**
|
||||
* pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit
|
||||
* Return: the raw_int_status1 bit from the memc_status register
|
||||
*/
|
||||
int pl353_smc_get_nand_int_status_raw(void)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS);
|
||||
reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT;
|
||||
reg &= 1;
|
||||
|
||||
return reg;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw);
|
||||
|
||||
/**
|
||||
* pl353_smc_clr_nand_int - Clear NAND interrupt
|
||||
*/
|
||||
void pl353_smc_clr_nand_int(void)
|
||||
{
|
||||
writel(PL353_SMC_CFG_CLR_INT_CLR_1,
|
||||
pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int);
|
||||
|
||||
/**
|
||||
* pl353_smc_set_ecc_mode - Set SMC ECC mode
|
||||
* @mode: ECC mode (BYPASS, APB, MEM)
|
||||
* Return: 0 on success or negative errno.
|
||||
*/
|
||||
int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode)
|
||||
{
|
||||
u32 reg;
|
||||
int ret = 0;
|
||||
|
||||
switch (mode) {
|
||||
case PL353_SMC_ECCMODE_BYPASS:
|
||||
case PL353_SMC_ECCMODE_APB:
|
||||
case PL353_SMC_ECCMODE_MEM:
|
||||
|
||||
reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
|
||||
reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK;
|
||||
reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT;
|
||||
writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
|
||||
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode);
|
||||
|
||||
/**
|
||||
* pl353_smc_set_ecc_pg_size - Set SMC ECC page size
|
||||
* @pg_sz: ECC page size
|
||||
* Return: 0 on success or negative errno.
|
||||
*/
|
||||
int pl353_smc_set_ecc_pg_size(unsigned int pg_sz)
|
||||
{
|
||||
u32 reg, sz;
|
||||
|
||||
switch (pg_sz) {
|
||||
case 0:
|
||||
sz = 0;
|
||||
break;
|
||||
case SZ_512:
|
||||
sz = 1;
|
||||
break;
|
||||
case SZ_1K:
|
||||
sz = 2;
|
||||
break;
|
||||
case SZ_2K:
|
||||
sz = 3;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
|
||||
reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK;
|
||||
reg |= sz;
|
||||
writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size);
|
||||
|
||||
static int __maybe_unused pl353_smc_suspend(struct device *dev)
|
||||
{
|
||||
struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
|
||||
|
||||
clk_disable(pl353_smc->memclk);
|
||||
clk_disable(pl353_smc->aclk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused pl353_smc_resume(struct device *dev)
|
||||
{
|
||||
int ret;
|
||||
struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
|
||||
|
||||
ret = clk_enable(pl353_smc->aclk);
|
||||
if (ret) {
|
||||
dev_err(dev, "Cannot enable axi domain clock.\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = clk_enable(pl353_smc->memclk);
|
||||
if (ret) {
|
||||
dev_err(dev, "Cannot enable memory clock.\n");
|
||||
clk_disable(pl353_smc->aclk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct amba_driver pl353_smc_driver;
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend,
|
||||
pl353_smc_resume);
|
||||
|
||||
/**
|
||||
* pl353_smc_init_nand_interface - Initialize the NAND interface
|
||||
* @adev: Pointer to the amba_device struct
|
||||
* @nand_node: Pointer to the pl353_nand device_node struct
|
||||
*/
|
||||
static void pl353_smc_init_nand_interface(struct amba_device *adev,
|
||||
struct device_node *nand_node)
|
||||
{
|
||||
unsigned long timeout;
|
||||
|
||||
pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8);
|
||||
writel(PL353_SMC_CFG_CLR_INT_CLR_1,
|
||||
pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
|
||||
writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
|
||||
PL353_SMC_DIRECT_CMD_OFFS);
|
||||
|
||||
timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT;
|
||||
/* Wait till the ECC operation is complete */
|
||||
do {
|
||||
if (pl353_smc_ecc_is_busy())
|
||||
cpu_relax();
|
||||
else
|
||||
break;
|
||||
} while (!time_after_eq(jiffies, timeout));
|
||||
|
||||
if (time_after_eq(jiffies, timeout))
|
||||
return;
|
||||
|
||||
writel(PL353_NAND_ECC_CMD1,
|
||||
pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS);
|
||||
writel(PL353_NAND_ECC_CMD2,
|
||||
pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS);
|
||||
}
|
||||
|
||||
static const struct of_device_id pl353_smc_supported_children[] = {
|
||||
{
|
||||
.compatible = "cfi-flash"
|
||||
},
|
||||
{
|
||||
.compatible = "arm,pl353-nand-r2p1",
|
||||
.data = pl353_smc_init_nand_interface
|
||||
},
|
||||
{}
|
||||
};
|
||||
|
||||
static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
|
||||
{
|
||||
struct pl353_smc_data *pl353_smc;
|
||||
struct device_node *child;
|
||||
struct resource *res;
|
||||
int err;
|
||||
struct device_node *of_node = adev->dev.of_node;
|
||||
static void (*init)(struct amba_device *adev,
|
||||
struct device_node *nand_node);
|
||||
const struct of_device_id *match = NULL;
|
||||
|
||||
pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL);
|
||||
if (!pl353_smc)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Get the NAND controller virtual address */
|
||||
res = &adev->res;
|
||||
pl353_smc_base = devm_ioremap_resource(&adev->dev, res);
|
||||
if (IS_ERR(pl353_smc_base))
|
||||
return PTR_ERR(pl353_smc_base);
|
||||
|
||||
pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk");
|
||||
if (IS_ERR(pl353_smc->aclk)) {
|
||||
dev_err(&adev->dev, "aclk clock not found.\n");
|
||||
return PTR_ERR(pl353_smc->aclk);
|
||||
}
|
||||
|
||||
pl353_smc->memclk = devm_clk_get(&adev->dev, "memclk");
|
||||
if (IS_ERR(pl353_smc->memclk)) {
|
||||
dev_err(&adev->dev, "memclk clock not found.\n");
|
||||
return PTR_ERR(pl353_smc->memclk);
|
||||
}
|
||||
|
||||
err = clk_prepare_enable(pl353_smc->aclk);
|
||||
if (err) {
|
||||
dev_err(&adev->dev, "Unable to enable AXI clock.\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
err = clk_prepare_enable(pl353_smc->memclk);
|
||||
if (err) {
|
||||
dev_err(&adev->dev, "Unable to enable memory clock.\n");
|
||||
goto out_clk_dis_aper;
|
||||
}
|
||||
|
||||
amba_set_drvdata(adev, pl353_smc);
|
||||
|
||||
/* clear interrupts */
|
||||
writel(PL353_SMC_CFG_CLR_DEFAULT_MASK,
|
||||
pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
|
||||
|
||||
/* Find compatible children. Only a single child is supported */
|
||||
for_each_available_child_of_node(of_node, child) {
|
||||
match = of_match_node(pl353_smc_supported_children, child);
|
||||
if (!match) {
|
||||
dev_warn(&adev->dev, "unsupported child node\n");
|
||||
continue;
|
||||
}
|
||||
break;
|
||||
}
|
||||
if (!match) {
|
||||
dev_err(&adev->dev, "no matching children\n");
|
||||
goto out_clk_disable;
|
||||
}
|
||||
|
||||
init = match->data;
|
||||
if (init)
|
||||
init(adev, child);
|
||||
of_platform_device_create(child, NULL, &adev->dev);
|
||||
|
||||
return 0;
|
||||
|
||||
out_clk_disable:
|
||||
clk_disable_unprepare(pl353_smc->memclk);
|
||||
out_clk_dis_aper:
|
||||
clk_disable_unprepare(pl353_smc->aclk);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int pl353_smc_remove(struct amba_device *adev)
|
||||
{
|
||||
struct pl353_smc_data *pl353_smc = amba_get_drvdata(adev);
|
||||
|
||||
clk_disable_unprepare(pl353_smc->memclk);
|
||||
clk_disable_unprepare(pl353_smc->aclk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct amba_id pl353_ids[] = {
|
||||
{
|
||||
.id = 0x00041353,
|
||||
.mask = 0x000fffff,
|
||||
},
|
||||
{ 0, 0 },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(amba, pl353_ids);
|
||||
|
||||
static struct amba_driver pl353_smc_driver = {
|
||||
.drv = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "pl353-smc",
|
||||
.pm = &pl353_smc_dev_pm_ops,
|
||||
},
|
||||
.id_table = pl353_ids,
|
||||
.probe = pl353_smc_probe,
|
||||
.remove = pl353_smc_remove,
|
||||
};
|
||||
|
||||
module_amba_driver(pl353_smc_driver);
|
||||
|
||||
MODULE_AUTHOR("Xilinx, Inc.");
|
||||
MODULE_DESCRIPTION("ARM PL353 SMC Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,30 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* ARM PL353 SMC Driver Header
|
||||
*
|
||||
* Copyright (C) 2012 - 2018 Xilinx, Inc
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_PL353_SMC_H
|
||||
#define __LINUX_PL353_SMC_H
|
||||
|
||||
enum pl353_smc_ecc_mode {
|
||||
PL353_SMC_ECCMODE_BYPASS = 0,
|
||||
PL353_SMC_ECCMODE_APB = 1,
|
||||
PL353_SMC_ECCMODE_MEM = 2
|
||||
};
|
||||
|
||||
enum pl353_smc_mem_width {
|
||||
PL353_SMC_MEM_WIDTH_8 = 0,
|
||||
PL353_SMC_MEM_WIDTH_16 = 1
|
||||
};
|
||||
|
||||
u32 pl353_smc_get_ecc_val(int ecc_reg);
|
||||
bool pl353_smc_ecc_is_busy(void);
|
||||
int pl353_smc_get_nand_int_status_raw(void);
|
||||
void pl353_smc_clr_nand_int(void);
|
||||
int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode);
|
||||
int pl353_smc_set_ecc_pg_size(unsigned int pg_sz);
|
||||
int pl353_smc_set_buswidth(unsigned int bw);
|
||||
void pl353_smc_set_cycles(u32 timings[]);
|
||||
#endif
|
||||
Загрузка…
Ссылка в новой задаче